|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is a nice working and clean large lathe tool lantern. It’s very big and weights 13-1/2lbs. The slot is 1” wide and 3” tall. The base square is 3-1/4” ... moresquare. The Armstrong tool is a model T4-L.
Buy It Now
$10.40 Shipping Condition: Used Location: Santa Cruz, United States Lantern tool post holder 1/2" slot, looks barley used max height 1 1/4" looks to be barely used
Buy It Now
$8.85 Shipping Condition: Used Location: Cape Neddick, United States I suspect this fits many different lathes. The body diameter is about 31/32" (.967), it accepts a 3/8" tool holder. There is a gouge in the ring, seen ... morein pic 4, no effect on use.
Buy It Now
$7.57 Shipping Condition: Used Location: Seattle, United States For sale is a Lathe lantern type tool post. It fits my 10" Atlas metal lathe and the estate I purchased this from had a 12" Craftsman metal ... morelathe. The clamp bar on the bottom is 5/16" thick x 1-1/2" long x 1" wide.
4d 20h 34m 44s 0 bids
$49.00 Now
$14.50 Shipping Condition: Used Location: Laveen, United States This listing is for a Lantern Style Tool Post Holder. Post height about 4.5" excluding screw) Post body width about 1.5" wide, 11/16" slot ... morewidth, 2 3/8" slot height. Post base that fits in slide of lathe is 1 5/8" wide and 1/4" thick. Ask questions and check out the photos carefully and we should able to answer them, because I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
$8.85 Shipping Condition: Used Location: Guilford, United States Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ base is 1 3/8" x 1 1/4" post is 7/8" slot width is 7/16" has some chips around collar piece; see pics for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Buy It Now
$8.85 Shipping Condition: Used Location: Cape Neddick, United States I suspect this fits many different lathes. The body diameter is 7/8", it accepts a 3/8" tool holder.
Buy It Now
$12.45 Shipping Condition: Used Location: Highland, United States
Buy It Now
$11.63 Shipping Condition: Used Location: United States I am not sure just what this was for but suspect it may be for holding a boring bar ?. it has 2 holes bored that I suspect would hold a boring bar. The ... morebottom has an approx. 1 1/4" by 1 3/8" square with a threaded clamping ring.
Buy It Now
$7.20 Shipping Condition: New Location: Cincinnati, United States New Lathe Lantern Tool Post Tool Holder 5/8" Slot, 2 x2 x 5/16" Base, 1 1/4" Outside Diameter Post, Hardened Steel. (Never used, does not fit my 6" lathe.)
Buy It Now
$9.65 Shipping Condition: Used Location: Nashville, United States As shown, in overall good condition but please note - although there are good threads on the screw the lathe body was tapped a bit wonky & the screw will ... moregrab the side a bit on every turn & so it screws in fine with a wrench but can't really be done by hand. Base mount measures 3/8" x 1-11/16" x 1-15/16" & accepts 1/2" wide tool holders
Buy It Now
$7.57 Shipping Condition: New – Open box Location: Seattle, United States
Buy It Now
$9.00 Shipping Condition: Used Location: Saint Paul, United States For sale is a Lathe lantern type tool post. It fits my 10" Atlas metal lathe and the estate I purchased this from had a 12" Craftsman metal ... morelathe. The clamp bar on the bottom is 5/16" thick x 1-1/2" long x 1" wide.
Buy It Now
$14.50 Shipping Condition: Used Location: Laveen, United States This listing is for a Lantern Style Tool Post Holder. Post height about 4.5" excluding screw) Post body width about 1.5" wide, 11/16" slot ... morewidth, 2 3/8" slot height. Post base that fits in slide of lathe is 1 5/8" wide and 1/4" thick. Ask questions and check out the photos carefully and we should able to answer them, because I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Condition is Used.
Buy It Now
Free Shipping Condition: New Location: China Made of premium steel, it is durable and long lifespan. This item is a set of lathe cutter tools. Travel Makeup Brush Powder Foundation Brush Concealer ... moreMakeup Brush. - Style "E" Turning Tool (for turning, facing, boring, chamfering, threading, and V-grooving).
Buy It Now
$6.90 Shipping Condition: Used Location: Cape Neddick, United States The bottom plate is 7/8" x 1-1/8" x 3/16". It is 5/8 wide where it keys into the lathe. The lantern is 5/8" in diameter. This looks just like one I've ... moreseen for a Hardinge HLV-H, but I don't know for sure that this is the same.
Buy It Now
Free Shipping Condition: New Location: Canyon Country, United States Made out of D2 tool steel, heat treated. Adjustable to find tool center easily.
Buy It Now
$23.85 Shipping Condition: Used Location: Stormville, United States For auction is a lantern style tool post for an Atlas/Craftsman/South Bend/ Dunlop metal lathe. It can hold up to a 3/8" wide tool bit. And is in ... moregood working condition. For the various dimensions of this tool post please use the tape measure in the attached photographs for reference.This item is in used condition, and some small surface imperfections that were produced from normal use that can be seen in the photographs should not impair the functionality of the tool post. It is being offered in as-is condition.
Buy It Now
$14.50 Shipping Condition: Used Location: Laveen, United States This listing is for a Lantern Style Tool Post Holder. Post height about 4.5" excluding screw) Post body width about 1.5" wide, 11/16" slot ... morewidth, 2 3/8" slot height. Post base that fits in slide of lathe is 1 5/8" wide and 1/4" thick. Ask questions and check out the photos carefully and we should able to answer them, because I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
$14.50 Shipping Condition: Used Location: Laveen, United States This listing is for a Lantern Style Tool Post Holder. Post height about 4.5" excluding screw) Post body width about 1.5" wide, 11/16" slot ... morewidth, 2 3/8" slot height. Post base that fits in slide of lathe is 1 5/8" wide and 1/4" thick. Ask questions and check out the photos carefully and we should able to answer them, because I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
Free Shipping Condition: New Location: Canyon Country, United States Made out of D2 tool steel, heat treated.
$10.60 Shipping Condition: Used Location: Sultan, United States All used in good condition. All are Craftmsman brand, lantern tool post with rocker and washer, right, left, straight cutter holder, cutoff holder and ... moreknurl holder(knurls have been removed) Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$34.50 Shipping Condition: Used Location: Clermont, United States 1-7/16" TALL X 5/8 WIDE LATHE TOOL HOLDERS ARMSTRONG 2L 3/8. ASK for full res photos, video of operational testing, etc. photos may have distortion, are ... morefor general scale only. Opinion of condition is only that, an opinion.
Buy It Now
$13.55 Shipping Condition: Used Location: Daytona Beach, United States Very Nice- Complete Original rocker type tool post for a South Bend 9" or 10K lathe with tool post wrench. Tool post base measures 1 3/8" x ... more1 1/4" x 1/4" Body diameter is 7/8" Stands 3" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/16" With the washer and rocker in place. Original bolt is in good order, not compressed as often seen, is removable. Nice 3/8" tool post wrench is also included. All in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$17.95 Shipping Condition: Used Location: Madison, United States 1 straight.
Buy It Now
$2.35 Shipping Condition: New Location: Overland Park, United States Armstrong Right Hand 1010R Turning Tool for Atlas, South Bend 6"-10" Lathe New In Box! See photos for exact item you will receive.
Buy It Now
$7.00 Shipping Condition: Used Location: Pocatello, United States CRAFTSMAN INCH LATHE 9571 LANTERN TOOL POST ROCKER.
Buy It Now
Free Shipping Condition: New Location: China They are good accessories to help you to find the location quickly in repair work. - Butt welding jigs are used to manufacture precision butt welds and ... moreedge-to-edge welds, repair floors, wings, door and re-skinning projects, etc.
Buy It Now
Free Shipping Condition: New Location: China Walnut Pen Stand Office Display Rack Writing Holder Fountain. Are you looking for a set of professional, yet affordable cup turner machine drying stand?. ... moreAre you in search of a sturdy, trustworthy tool that can do multiple jobs at once?.
Buy It Now
Free Shipping Condition: New Location: China Include 10 pcs lengthened electrode, 10 pcs lengthened nozzle, 10pcs protective cover, 10 pcs shunt. Our products will your experience to unparalleled ... moreinspiration. Extended long plasma cutter tip electrodes and nozzles kit consumable for 40A plasma cutting machine CUT-40, -40 plasma cutting.
Buy It Now
$14.50 Shipping Condition: Used Location: Laveen, United States It doesn't appear to have any brading marks on it, but it is beautifully made and is in excellent condition. It is designed to fit a 15/16" wide tool ... moreand is perfect for use with lathe turning tools.
1d 14h 51m 10s 0 bids
$105.00 Now
$15.35 Shipping Condition: Used Location: Mesa, United States Large, heavy duty tool holder. Slot is 7/8 inch wide X 2 1/8 inch. T nut is include 2 1/2 inch x 7/8 inch. This holder is in great condition and would ... morebe a excellent tool addition if you lathe can handle it.
Buy It Now
Free Shipping Condition: For parts or not working Location: Gainesville, United States Armstrong 83-697 Knurling tool(missing 1 of 3 sets of knurling wheels)3-Armstrong No 32R parting tool holders. Williams Vulcan #10 lathe dog. Lot of lathe ... moretools being sold as is.Tools have wear and tear.Everything in pictures included.
Buy It Now
Free Shipping Condition: New Location: China 5mm pitch diagonal dual wheels coarse linear knurling roller tool knurler. Two rollers twill direction: one is positive and the other one is negative. ... more2 PCS Baby Ear Picker Baby Booger Tweezers Ear Wax Tweezers Baby Nose Cleaner.
Buy It Now
$17.45 Shipping Condition: Used Location: Opa Locka, United States ARMSTRONG AND WILLIAMS LATHE TOOL HOLDER 13 PCS SET 2 LANTERN TOOL POST, 1/4 BIT HOLDER, THREADING AND CUTTING HOLDER AND KNURLING TOOL FOR 9" AND 10" ... moreSOUTH BEND LATHE, ONLY ONE HOLDER IS NOT MADE IN USA, VERY NICE USED CONDITION
Buy It Now
Free Shipping Condition: New Location: China 100pcs Stainless Steel Screw-In Ceiling Cup Hooks Light Hangers Hooks Mug Hooks. Set 4 Sitz Bath Pan Shower Head Diverter Valve Showerheads Sma Adapter. ... more5 in 1 Aquarium Cleaning Fish Tank Algae Vacuum Gravel Glass Cleaner Brush.
Buy It Now
$5.95 Shipping Condition: Used Location: Denver, United States Pratt Whitney Lathe Cut-Off Tool Holder/Grooving tool No. 00 For 1/2” Parting Blades USA 🇺🇸 (comes with two unused, high-speed steel parting/grooving ... moreblades)See photos for dimensions and cosmetic details such as signs of previous use and wear, overall decent condition and works very well. Good for use inside of your lantern style tool post holder. Altogether a very interesting design. Made in USA 🇺🇸
Buy It Now
$8.85 Shipping Condition: Used Location: Baldwin, United States
$15.00 Shipping Condition: Used Location: Valrico, United States Armstrong No. 1 Tool Holders Left, Right, and Straight For Lantern Tool Post is a set of tool holders designed for use with a lantern tool post. The set ... moreincludes left, right, and straight tool holders, all made by Armstrong. These tool holders are used for holding cutting tools in place during machining operations.
Buy It Now
$9.99 Shipping Condition: Used Location: Marcellus, United States Metal Lathe Tool Post, Lantern Type Tool Holder 5-7/8" Tall (excluding top screw) x ~1-3/4" Diameter (shaft at slots).
Buy It Now
$37.20 Shipping Condition: Used Location: Lenoir, United States This lot consists of a latern style tool post and 13 tool holders Tooling right and left cut parting and Threading knurling. a perfect addition for any ... moremachinist, tool and die maker or home shop owner. With a variety of sizes and styles, you'll have everything you need for your next project. Williams and Armstrong name brands. These Tooling cutters are great for working with metal and will help you achieve precise cuts every time. Whether you need to make a small adjustment or a major modification, these tools / cutters are up to the task. Don't miss out on this amazing opportunity to expand your collection of metalworking supplies.
Buy It Now
$10.40 Shipping Condition: Used Location: Milroy, United States Tee - approx. 335" thick x 1.775" x 1.775".
Buy It Now
$12.99 Shipping Condition: Used Location: Marcellus, United States Metal Lathe Tool Post, Lantern Type Tool Holder 6-1/2" Tall (excluding top screw) x ~1-3/4" Diameter (shaft at slots). Includes base and wrench as pictured.
Buy It Now
$18.60 Shipping Condition: Used Location: New Hyde Park, United States Large Lathe Lantern Tool Post Holder South Bend Leblond Regal Monarch Hendey. Condition is Used. Shipped with USPS Ground Advantage. Nut on the bottom ... moreis slightly loose.
Buy It Now
$8.74 Shipping Condition: Used Location: Gainesville, United States
Buy It Now
$26.94 Shipping Condition: Used Location: Bradenton, United States ARMSTRONG holders. WILLIAMS holders. J&S Tool Co Heavy Duty Live Center #6 Morse taper #GMT-1032. (1) 6 Position boring bar holder. (30) CLEVELAND Coolant ... moreThough Thru Drill Bits. 2505" USA #GMT-1107. Specializes in preowned, cycled and.
Buy It Now
$10.40 Shipping Condition: Used Location: Milroy, United States Slot - approx 7/16" wide x 1 5/8" tall.
Buy It Now
$10.40 Shipping Condition: Used Location: Piasa, United States Everede No 3 boring bar holder.
Buy It Now
$9.99 Shipping Condition: Used Location: Uhrichsville, United States This holder is angled/offset to the LEFT. This tool holder is for 3/8" square HSS bits like Rex, Crucible, LaTrobe, MoMax, etc. The square snugging machine ... morescrew bolt uses a 1/2" wrench. Armstrong made these bolts from a treated alloy with a hardened point.
Buy It Now
$9.99 Shipping Condition: Used Location: Uhrichsville, United States This holder is angled/offset to the Right. This tool holder is for 3/8" square HSS bits like Rex, Crucible, LaTrobe, MoMax, etc. The square snugging machine ... morescrew bolt uses a 1/2" wrench. Armstrong made these bolts from a treated alloy with a hardened point.
Buy It Now
$9.99 Shipping Condition: Used Location: Uhrichsville, United States Here is agood used Armstrong No. S-23 (Straight) HSS PARTING TOOL bit tool holder. This is a "SPRING" style holder. This holder holds 3/16" x 1" HSS parting ... morebits like Armstrong, Rex, Crucible, LaTrobe, MoMax, etc.
Buy It Now
$41.50 Shipping Condition: Used Location: Canada
Buy It Now
$9.99 Shipping Condition: Used Location: Uhrichsville, United States This holder is angled/offset to the RIGHT. This tool holder is for 1/2" square HSS bits like Rex, Crucible, LaTrobe, MoMax, etc. The square snugging machine ... morescrew bolt uses a 5/8" wrench and moves freely.
Buy It Now
$9.99 Shipping Condition: Used Location: Uhrichsville, United States This holder is angled/offset to the Right. This tool holder is for 3/8" square HSS bits like Rex, Crucible, LaTrobe, MoMax, etc. The square snugging setscrew ... morebolt uses a 3/8" wrench. Armstrong made these bolts from a treated alloy with a hardened point.
Buy It Now
$12.99 Shipping Condition: Used Location: Uhrichsville, United States Here is a good, complete lightly-used Eagle Rock Technologies USA # A1-248-04 (Model WET-4) Shaplane Radius Tool CONCAVE for turning 1" thru 3" Radius ... moreon your work. Minimum size radius is 1". You can turn the knurled wheel to adjust the holder by hand or with the included tool.
Buy It Now
Free Shipping Condition: Used Location: Uhrichsville, United States This holder is angled/offset to the Right. This tool holder is for 1" square HSS bits like Rex, Crucible, LaTrobe, MoMax, etc. The hex head cap screw ... moreto snug the tool bit uses a 7/8" Allen wrench.
Buy It Now
$8.99 Shipping Condition: Used Location: Uhrichsville, United States Here is an good working lightly-used J.H. Williams USA No. TH-3-K-1 Knurling tool. It has 3 different sets of (2) 3/4" knurl wheels in the diamond pattern. ... more7" long overall.
Buy It Now
Free Shipping Condition: New Location: China The 1/4 "hex is designed for cordless screwdriver and allows you to change bits quickly. - It can be used with cordless screwdriver. 10pcs Diamond Drill ... moreBits Glass and Tile Hollow Core Drill Bits Extractor for.
|
|
|
|
Atlas 10" Lathe Threading Tool Holder for Lantern Post Southbend
Atlas 10" Lathe Threading Tool Holder for Lantern Post Good No Reserve In very good original undoctored. Uncleaned condition- with no cracks breaks or repairs- Really good sound condition- Looks like close to original grind with minimal clamping marks on shank Shank measures 7/8" x 3/8" nominal These will fit any 9/10 inch sized lathe with a lantern tool post such as a southbend or logan. If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned. return terms apply to domestic purchases only) I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed ... morein the description.
|
|
|
ORIGINAL J H WILLIAMS ATLAS CRAFTSMAN LATHE ROCKER LANTERN TOOL POST HOLDER SET
ATLAS OR CRAFTSMAN 10/12 INCH LATHE ROCKER LAN T ERN TOOL POST& WRENCH BASE 1" X 1 1/2" X 5/16" 1" DIAM INSIDE DIMENSIONS 7/16"X 1 9/16" STRAIGHT TOOL HOLDER NO. O-SH RIGHT TOOL HOLDER NO. 2010R LEFT TOOL HOLDER NO. 20-LH 3/8" x 7/8" x 5" LENGTH The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Atlas Th54 metal lathe lantern rocker tool post tool holder.
Atlas Th54 metal lathe lantern rocker tool post tool holder. This tool holder is different then the ones i sold in the past. look at the pictures.It has a piece that the rocker sits in. Will combine shipping. Thanks for looking.
|
|
|
Craftsman Lantern Tool Post Holder 3/16" Mini Lathe Bits Machinist Gunsmith Tool
This auction is for a Craftsman No. 2033 Turning Toolholder for 3/16 inch bits Shank is 5/16" by 5/8" 4 3/16 inch bits are included Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures Below show items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
LANTERN TOOL POST HOLDER LATHE ATLAS CRAFTSMAN SOUTH BEND LOGAN CLAUSING LATHE
LANTERN TOOL POST HOLDER FITS ATLAS 618 CRAFTS MAN 101 6" LATHES IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF ... moreMY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
|
|
|
Rocker Lantern Tool Post Tool Holder &Bit 6" Craftsman 109 Metal Lathe 109.20630
Welcome to my site! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Great condition. There are a few small nicks on the outer rim of the circular piece. But this will not affect performance. Tool holder opening is about 7/8" tall. 5/16" wide and 1/2" deep The entire post. Not including the top bolt is 1 11/16" tall COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price ... morewill be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
|
|
|
Vintage Rocker Lantern Post Tool Holder for Atlas, Craftsman, South Bend Lathe
Vintage Rocker Lantern Post Tool Holder for Atlas. Craftsman, South Bend Lathes. See pictures for details. I am cleaning out the garage and selling lots more vintage tools and parts. So please check my other listings. I have 100% feedback and want everyone to be happy with their purchase. So bid with confidence. I am happy to provide any additional information or more pictures. Please ask if anything is unclear. I will also combine shipping where possible to save you some money.
|
|
|
2 Rocker Lantern Tool Post & Tool Holder Atlas Craftsman South Bend Logan Lathe
BOTH IN VERY GOOD CONDITION WORK FINE.1 1/2 INCH CAPACITY.BASE PLATE IS 1 1/2 X 1 INCH.HEIGHT 3 1/2 INCHES FROM BOTTOM OF PLATE TO TOP OF LANTERN NOT INCLUDING TOOL HOLD DOWN BOLTS.BOTH SAME SIZES Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
South Bend Lathe Lantern Tool Holder Tool Post 13"-16" Lathe
South Bend Lathe Lantern Tool Holder Tool Post Fits 13" 16" Lathe
|
|
|
Armstrong Lantern 5/16" Mini Lathe Bits Tool Post Holder Machinist Gunsmith Tool
This auction is for an"Armstrong No. 1 L Tool Post Holder for 5/16" lathe bits The shank size is 1 1/8" X 1/2" two high speed bits are included in the auction
|
|
|
ATLAS 101 6" METAL LATHE LANTERN TOOL POST HOLDER
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~ good condition post is 3/4" slot is 7/16" base is 1 5/8" x 1 1/8" tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding ... moreon the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
|
|
|
Vintage Atlas? Rocker Lantern lathe Tool Holder Post Logan South Bend Machinist
UP FOR YOUR CONSIDERATION IS: Vintage Atlas? Rocker Lantern lathe Tool Holder Post Logan South Bend Machinist. PURCHASED AT AN ESTATE SALE. Post is 2" slot width is 5/8" base is 1 3/4" x 1 3/4" NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Armstrong Knurling 4 Wheel Lantern Tool Post Holder Machinist Gunsmith Tools Lot
Ebay Base This auction is for a lantern style. Double wheel lathe knurling tool in 3/4" x 3/8" shank. This is model № 2040 made by Armstrong, USA. This comes with 2 pairs of wheel that cut different patterns. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Unknown Lathe Machinist Lantern Tool Post Holder Style slot 3/4" wide 2" tall
This listing is for a Lantern Style Tool Post Holder. Post height about 5" excluding screw) Post body width about 1.5" wide, 3/4" slot width, 2 1/8" slot height. Post base that fits in slide of lathe is 1 1/2" wide and 5/16" thick. Ask questions and check out the photos carefully and we should able to answer them, because I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
|
|
|
Ace Armstrong Tool Set 8A w/Lantern Post Holder Atlas Logan Craftsman Lathe
Offered is an Ace Tool Set No. 8A. Mfd by Armstrong Bros. Tool Co. Box& Tools are in overall great used condition. The box is in great shape. Aside from being dirty, likewise the included tools. The set is not complete and consists only of what is show in the pics. The Lantern Tool Post measurements: approx 7/8" diam. approx 1.10" round post base. approx 3/8" slot width. 2" 2.25" Base Washers. No. 2010S Straight Holder(1/4" No. 2030 Left Hand Boring Tool. No. 2020R Right Hand Cutter(has had holder arm cut down) No. 2040 Knurling Tool. 2 Wrenches. One for the Lantern Post& one for the Boring Bar. We also currently have a Skinner 6" Chuck posted. Priority Mail shipping is included to 48 States. Alaska& Hawaii will have additional costs. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1434651e24a-0xfd-
|
|
|
LANTERN TOOL POST/ARMSTRONG WRENCH/TOOL HOLDER SOUTH BEND LOGAN ATLAS LATHES
Armstrong 3/8" wrench and No. 0-L tool bit holder. The clamp block is.300 thick and 1" between the two L cuts. Third picture shows a few rough spots that adds to its charm. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14369adb020-0x106-
|
|
|
Lathe Tool Post Holder Lantern Style 13/32" or .42" Capacity
This unknown make of lathe tool post is approx. 3" tall(excluding screw) and about.75(3/4) wide. The slot is about.42" wide and about 1 and 3/4" tall(excluding ring) The bottom plate/base is approx. 0.18" thick. 1 and 1/2" long and about 1 and 1/8" wide. The concave ring at the bottom is about.2" thick at widest point. Seems in working order. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $5.35. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
|
|
|
LANTERN TOOL POST HOLDER W/ ASSORTED LOT OF 5 TOOL HOLDERS WILLIAMS ARMSTRONG
Lantern Tool Post Holder w/ 5 Assorted Tool Holders Lantern Tool Post 3/4" x 2-3/4" Capacity Tool Holders Measure 1-3/8" x 5/8" x 7" Lot Includes: Armstrong No. 2S 3/8" Capacity Armstrong No. 2-L(2) Williams No. 2-S Williams No. 2-R Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot ... moreissue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Armstrong ACE Threading Tool Holder f/ Small Lathe w/ Lantern Post South Bend
Armstrong ACE Lathe threading tool for a smaller southbend. Atlas or logan with a lantern style Really a nice tool in original uncleaned, undoctored condition. Shank measures NOM 3/4 x 3/8 No 89-579. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remember, these are used items and even an item in excellent condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain alternative shipping methods other than those listed in the description.
|
|
|
BORING BAR LANTERN TOOL POST ROCKER LATHE HOLDER V-GROOVE 1/2" ATLAS CRAFTSMAN
FREE SHIPPING NO RESERVE LANTERN/ ROCKER/ SWIVEL TOOL/ BORING BAR HOLDER- FOR 1/2" DIAMETER OR SMALLER BORING BARS OR CAN BE USED ON THE OPPOSITE SIDE TO HOLD SQUARE TOOLS UP TO 1/2 X 1/2 I THINK IT WAS MADE BY MY GRANDFATHER IN 1939! 1/2 INCH CAPACITY I AM A REAL TOOLMAKER W/ 35+ YEARS EXPERIENCE AND ALL TOOLS ARE LEFTOVER FROM MY SHOP IN CALIFORNIA I AM CLEANING OUT THE TOOLBOXES THAT I HAD IN THE CALIFORNIA SHOP WATCH MY FUTURE AUCTIONS FOR BARGAINS GALORE FREE SHIPPING BID NOW AND BID HIGH ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1444073dafc-0xed-
|
|
|
ATLAS LOGAN SOUTH BEND 9 10 12 LATHE LANTERN STYLE ROCKER TOOL POST HOLDER PARTS
HERE'S A ATLAS CRAFTSMAN LOGAN SOUTH BEND 9" 10" 12" METAL LATHE LANTERN STYLE ROCKER TOOL POST HOLDER FOR PARTS. DIMENSIONS ARE: TOOL POST BASE: 1.537 X 1.25 X.189 TOOL POST BODY DIAMETER: 750 HEIGHT TO SHOULDER( TOP OF SLOT) 2 1/2 SLOT WIDTH: 408 SLOT LENGHT: 1.821 PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1448c580f34-0xec-
|
|
|
SOUTH BEND 9 10K LATHE LANTERN STYLE ROCKER TOOL POST HOLDER
HERE'S A SOUTH BEND 9" 10" METAL LATHE LANTERN STYLE ROCKER TOOL POST HOLDER. THE LAST TWO PICTURES SHOW A SECOND CHIPPED ROCKER INCLUDED IN THIS AUCTION. THE FIRST ONE IS NOT AN ORIGINAL ONE. DIMENSIONS ARE: TOOL POST BASE: 1.40 X 1.25 X.25O TOOL POST BODY DIAMETER: 860 HEIGHT TO SHOULDER( TOP OF SLOT) 2 1/8 SLOT WIDTH: 415 SLOT LENGHT WITH WASHER& ROCKER IN PLACE: THERE IS 2 ROCKERS INCLUDED ONE MAKE THE HEIGHT 1" THE OTHER MAKE IT 1 1/4" PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
ARMSTRONG No. 2R LATHE TOOL HOLDER & LANTERN TOOL POST
Inventory Number: 05131660682 Manufacturer: Description: ARMSTRONG No. 2R LATHE TOOL HOLDER& LANTERN TOOL POST Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: No. 2R, ONE: UNKNOWN PART NUMBER, SOME SURFACE RUST. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time ... moreof invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we
|
|
|
ORIGINAL ATLAS CRAFTSMAN 10 12 LATHE ROCKER LANTERN TOOL POST +extra holder!!!
ORIGINAL ATLAS CRAFTSMAN 10 12 LATHE ROCKER LANTERN TOOL POST +EXTRA LANTERN HOLDER OF UNKNOWN ORIGIN THAT FITS ATLAS CRAFTSMAN 10/12" LATHES. BOTH ROCKERS ARE USED AND SHOW SIGNS OF BEING USED BUT ARE FULLY FUNCTIONAL. WHAT YOU SEE IN THE PICTURES IS WHAT YOU'LL RECEIVE.PLEASE ASK ANY QUESTIONS BEFORE BIDDING.
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6" METAL LATHE ROCKER LANTERN TOOL POST HOLDER M6-39X
ORIGINAL ATLAS 6 In. LATHE ROCKER LANTERN TOOL POST HOLDER PART No. M6-39X 3/4" DIAM. 13/32" X 1-1/2" 1-1/8" X 1-11/16" X 3/16" The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Lantern Style Tool Post for No. 0 Tool Holder
Lantern Style Tool Post for No. 0 Tool Holder Width of tool slot: 0.5" Square Base Please wait to be invoiced Buyer is responsible for all shipping costs NO INTERNATIONAL SALES
|
|
|
2 tool holder lantern style lathe post small 1/2" and 7/16"
first one is 1/2 in inner tool holder width the other is 7/16ths an inch inner width. no rockers too small for me maybe a mini lathe with smaller tool holders than the armstrong ones ive been buying
|
|
|
10" SOUTH BEND LATHE Model A Atlas Logan Lantern Rocker Tool Post Holder
I will be listing a complete grouping of parts from a disassembled SOUTH BEND QUICK CHANGE GEAR PRECISION MODEL A BENCH LATHE. This Lathe was used in a Fabrication plant here in Orlando that was in business since the early 1940's and closed a few years back. They manufactured only parts for Aircraft for the U.S. Military. I am not a Machinist so only as familiar with these items as my research will allow so please read the listing. View photos and ask questions. The following information is found on the Manufactures Brass Plate on the Quick Change Gear Box: South Bend Lathe Works, Precision Lathe, Model A, Catalog Number CL10057, Bed Length 3 1/2 ft. Chart No. 1" Also, on the Cast Iron Bed is"South Bend 10" and 2 sets of Numbers including"3700RKT9" Serial Number? and"LT106R" All parts, bolts, screws ... morethat I have will be listed with the various parts and shown in the photos. Also, all parts shown were either disassembled from the lathe or came with the Lathe and in a box marked"South Bend 10" Lathe" For your Bidding Consideration in this Auction is the following Part(s) LOT NUMBER: 33 PART: 10" SOUTH BEND LATHE Model A Atlas Logan Lantern Rocker Tool Post Holder. The Holder. Not counting the screw on top, is 3 1/8" tall. The base is 1 1/4" in diameter. The slot where the tools fit is 1 7/8" high x 1/2" wide. COMMENTS: Nice but used condition. Please view photos. SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should p
|
|
|
LANTERN TOOL POST HOLDER, WILLIAMS 0-SH 0-L TOOL HOLDERS WRENCHES
LANTERN TOOL POST HOLDER. WILLIAMS 0-SH 0-L TOOL HOLDERS WRENCHES These Parts came with and were being used on a Craftsman 101-07301- 6” Lathe. Not sure if they were manuctured for the craftsman the early 101 Lathe or not. Tool post holder does fit the 101- 6” Lathe compound Slide. No Markings on the tool post holder it is missing the rocker key otherwise in great shape. Wrench is Armstrong M6-115 and fits tool post holder Tool Holders are Made By WILLIAMS numbered 0-SH& 0-L Other Wrench Is Made By South Bend and fits Tool Holders 5 various Tool Bits Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES ... moreHAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
|
|
|
Machinist Lathe Post Tool Holder Lantern Style believed for 10" South Bend
We are not positive this is for a 10" lathe. Or that it is South Bend, but that is the conclusion we came to after some searching. It came with a South Bend 9" lathe we recently purchased at auction but, unfortunately, doesn't fit it. Please read all the measurements. And if you need any other be sure to ask. It looks like the prior owner bought the wrong part, certainly don't want you to do the same. I found no name or number on it. Post height(from bottom of square base to top. Excluding screw) 3 1/4" slot 1 1/2" high. Without any of the screw tip protruding into it slot width- 1/2" square base- 1 1/2" x 1 3/8"x 1/4" No rocker or tool included Looks in very good condition. Screw threads smoothly. Searching estate sales. Auctions and yard sales to find you(and me) fun stuff. Please read the ... moredescription and look at the photos closely. They are of the actual items being auctioned. If you have questions please ask before you bid. We expect winning bidder to respond within 3 days of auction end and ship within 3 days of receiving cleared payment.
|
|
|
Lantern Post Tool Holder for Lathe - Hardinge #. D-11
Hi; for auction we have a great Hardinge D-11 Lantern Tool Post. Great operation condition. Please email with any questions and also view my other items. I do combine shipping. Thanks
|
|
|
Lantern Post Tool Holder for Metal Lathe - Hardinge no. D-11
You are looking at a lantern post style tool holder for a metal lathe made in the USA by Hardinge. This tool holder will hold 1/4" HSS cutters and has a 1" base. The hand screw on top works easily and everything you see is included. I will ship via Priority Mail as soon as cleared payment is received. Please ask questions before you bid and I will answer promptly. There is a 14 day return policy if not as described. Thanks for looking.
|
|
|
METAL LATHE LANTERN TOOL POST HOLDER SOUTH BEND ATLAS CRAFTSMAN LOGOAN
LANTERN TOOL POST ASSEMBLY 3/4" DIAMETER SLOT 1-3/4" X 13/32" BASE 15/16" DIAM. X 1/8" THICK The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
6" Atlas Craftsman Hardinge Lathe Lantern Rocker Tool Post Holder 3/8" Slot
Good condition. Please review photos and email any questions.
|
|
|
South Bend 9" Metal Lathe Tool Post Lantern Holder
South Bend 9" Metal Lathe Tool Post Lantern Holder It is in good condition with some wear. The base ring has some edge wear and the lantern has some wear on the bottom. It works fine. It is o ff a South Bend 9" metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Craftsman 101 Atlas 618 6" Lathe Lantern Tool Post Holder Assembly M6-39X
Original Craftsman 101 Atlas 618 6" Lathe Lantern Tool Post Holder Assembly M6-39X in good used working condition with no visible damage. Here in the past I have sold items that had been bid on and the winning buyer for some reason does not pay. E-Bay has a tool that lets a seller after 7 days of non-payment for the item open a case sending the winning bidder a notice of non-payment and telling them they have five days to pay for the item. If the winning bidder does not pay within the five days. E-Bay closes the case and returns any funds that they had charged the seller and relist the item for the seller. They then put a mark on the buyer as having not paid for an item. I hate to do this, but to open and close these cases is time consuming for me as a seller. I also have gave feedback in the past to a buyer for quick payment and other ... morecomments before receiving feedback on me as a seller, but in the future I will not give any feedback as a seller until I have receive feedback from the buyer. If you buy any item from me and you have a problem of any kind please contact me and we will come to some kind of understanding and if you will notice on all of my listing I have a return policy.
|
|
 |