|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Unionville, United States This is has been all checked over needs nothing you will not find a nicer later model D7F anywhere. These nice low hour machines are hard to find so don't ... moremiss out the chance to own an almost new dozer for a 1/4 of the price of new without all the emissions junk on them.
Buy It Now
Condition: Used Location: Carbondale, United States 1967 Caterpillar D8H crawler dozer, Fleco open ROPS, CAT D342 turbo diesel engine, electric start conversion, CAT 8S semi-U blade w/ hydraulic tilt, bolt ... moreon cutting edge, 3 shank single bbl ripper, LIKE NEW CAT OEM undercarriage, powershift transmission. MACHINE RUNS AND OPERATES, STRONG OVERALL. UNDERCARRIAGE IS IN EXCELLENT EXCELLENT CONDITION AND IS CAT OEM PARTS, SEE PICTURES -- YOU WON'T SEE THIS VERY OFTEN ON AN OLDER TRACTOR LIKE THIS !!! THESE H SERIES DOZERS WILL BE AROUND FOREVER AND FOR GOOD REASON -- LEAVE THIS ONE OUT IN THE FIELD FOR MONTHS, COME RIGHT BACK TO IT AND GO TO WORK LIKE NOTHING EVER HAPPENED -- COME CHECK THIS ONE OUT -- BIG BIG POWER FOR THE PRICE ! !
Buy It Now
Condition: Used Location: Carbondale, United States STRONG RUNNING MACHINE, GOOD U/C, CLEAN OVERALL CONDITION, ICE COLD A/C, DRY AND TIGHT. MACHINE IS IN GOOD CONDITION AND READY TO GO -- SEE PICTURES -- ... moreSHE CHECKS OUT AND WITH A RIPPER TOO ! Otherwise, no exceptions to this policy.
Buy It Now
Condition: Used Location: Carbondale, United States SUPER CLEAN -- RUNS AND WORKS JUST AS IT SHOULD, MACHINE IS TURN KEY AND WORKING NOW SO HOURS MAY CHANGE SLIGHTLY. HOURS WILL CHANGE SLIGHTLY FROM PICTURES, ... moreMACHINE IS STILL WORKING . Otherwise, no exceptions to this policy.
Buy It Now
Condition: Used Location: Carbondale, United States Otherwise, no exceptions to this policy.
Buy It Now
Condition: Used Location: Canada Differential – Cat Dealer Complete Rebuild. Earth moving. Popular Make. We Are Happy To Assist You! YOU HEARD IT HERE FIRST! We have partners that specialize ... morein late model and lower hour machines as well as older and higher hour units.
Buy It Now
Condition: Used Location: Mesa, United States The 2017 John Deere 700K XLT is a robust bulldozer, designed for heavy-duty operations. The machine is equipped with a Diesel Particulate Filter and DEF ... moreTank, and an open cab. John Deere. We have partners that specialize in late model and lower hour machines as well as older and higher hour units.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Fits Caterpillar Backhoe Models Fits Caterpillar Crawler Models Fits Caterpillar Crawler Loader Models Fits Caterpillar Wheel Loader Models (8E6209)Ten ... moreRetainers - Made With The Toughest Materials To Increase Wear Life.
Buy It Now
Condition: Used Location: San Diego, United States It has only been used for 854 hours and has a power shift transmission. The blade is a 6-way blade, making it easy to move dirt and other materials. The ... morerippers included with this dozer make it even more versatile.
Buy It Now
Condition: Used Location: Omaha, United States 2023 Case 650M WT Serial Number: JJGN650MCPC101101 Introducing the 2023 Case 650M WT - the perfect solution for your heavy-duty needs! With only 88 hours ... moreof use, this bulldozer is in pristine condition and comes equipped with a 6-way blade, a U-shaped blade, a multi shank ripper, and steel tracks for maximum efficiency. Its enclosed ROPS ensures safety, while the A/C and heat keep you comfortable all year round. This dozer has been well-maintained and is ready to be put to work. Don't miss out on this incredible opportunity to take your business to the next level! .
Buy It Now
Condition: Used Location: Ramona, United States 317-219-3191 SKU: A2Z7355 New Fuel Filter for Komatsu D39EX-22 Dozer- 600-311-3610. Condition: New Make: Komatsu Model: D39EX-22 Dozer OEM Part Number: ... more600-311-3610 Former OEM Part Number: 600-311-3610. 600-311-3620, 600-319-3610 This is a brand new Fuel Filter for Komatsu model/s: D39EX-22 Dozer; D39PX-22 Dozer; D51EX-22 Dozer; D51PX-22 Dozer; D61EX-15EO Dozer; D65EX-15 Dozer w/SAA6D114E-3 Eng; D65EX-15E0 Dozer; D65EX-15SL Dozer; D65PX-15 Dozer; D65PX-15E0 Dozer; D65WX-15 Dozer; D65WX-15E Dozer; GD655-3EO Grader; GD675-3 Grader; GD675-3EO Grader; PC160LC-7EO Excavator; PC200-8 Excavator; PC200LC-8 Excavator; PC220-8 Excavator; PC220LC-8 Excavator; PC228US-3 Excavator; PC228USLC-3 Excavator; PC228USLC-3EO Excavator; PC270LC-8 Excavator; PC300HD-7EO Excavator; PC300HD-8 Excavator; PC300LC-7EO Excavator; PC300LC-8 Excavator; PC300LL-7EO Excavator; PC308USLC-3EO Excavator; WA200-6 Loader; WA250-6 Loader; WA320-6 Loader; WA380-6 Loader w/Cummins Eng; WA380-6 Loader w/SAA6D107E Eng; WA430-6 Loader. This part replaces Komatsu part number: 600-311-3610. 600-311-3620, 600-319-3610. More Information: At A-Z Parts 4 U we pride ourselves in the ability to outsource the OEM and save our customers 25%50% sometimes more) on their part needs. We also take great care in getting the correct information to our customers so they can make informed decisions and get the right. Quality part the first time every time. Beware of the fly by night re-seller of aftermarket, this should work" type of guys out there. Our customer service is absolutely the best in the business, our staff with their many years of experience thrive on challenges to get the right part at the best price in the industry. They have formed relationships around the world with suppliers and customers alike and know how to get the job done and save money. Our inventory practices are slightly different than the industry normal practices. Many times we will ship within 24 hours of an order but we take the stance that we would rather exceed your expectations than f
Buy It Now
Condition: Used Location: West, United States Cat D8T bulldozer. Single shank ripper. Has 13000 hours. Still in use so hours may vary. Currently located in north Texas in use on a construction job. ... moreUndercarriage has been replaced recently. Oil samples are good.
Buy It Now
Condition: Used Location: Canada 2018 Caterpillar D8T Crawler Dozer For Sale in Edmonton, AB, Canada T2E7H9 Specifications Year: 2018 Manufacturer: Caterpillar Model: D8T Hours: 5,230 ... moreCondition: Used ROPS: Enclosed Owner’s Description “Fully serviced, work ready! Angle blade with MS Ripper. 2,000 idle hours. Links 50% worn. Roller 30% worn. Track pads 50%. Repair history, oil samples, & UC reports available.” For Assistance with Financing, Transport.
|
|
|
|
1981 Caterpillar D8K Crawer Dozer with Rippers
198 1 CATERPILLAR D8K CRAWLER DOZER WITH RIPPERS- Cra wler Dozer w ith Rippers- ORIGINAL PA INT* 70% UC-Very Nice Machine-Location: Florida. Near p ort- WE EXPORT TO ANY COUNTRY* 800x600 COMMERCIAL TRUCK AND HEAVY EQUIPMENT SALES About us: We are a Commercial Truck and Equipment dealer located in Mount Airy. NC. We have been in business since 1999 with many prior years of experience in the industry. We also specialize in exporting trucks and equipment all over the world. We can get very good rates on transporting domestic or international. We carry a variety of inventory and have access to almost anything you could need. If we don’t have it, we will try our best to find it for you. Warranty: You are more than welcome to and we encourage you to view. Test drive, operate or inspect anything that you have interest in. we try very hard to inspect ... moreand give accurate descriptions on everything that we list for sale. We don’t always see things the same as you may and could overlook something on occasion. All items are sold as is-where is unless otherwise stated. All sales are final with no returns or refunds. No warranty of any kind unless stated otherwise in our ads. Thank you for understanding. You may schedule a time to view and try out this truck at any time prior to the end of the auction. Please feel free to contact me with any questions. Terms of Sale $500.00 Deposit Due within 24 Hours of Auction End Remainder of payment due within 7 days of Auction End $285.00 DOC fee will be added to the sale price We reserve the right to end the auction if we sell this Equipment from our lot. Please do not bid if you can not pay or make arrangement prior that guarantees payment of this equipment. Item sold AS IS/Where Is Payment and Shipping We accept cashier’s check. Loan check. Cash. Or wire transfer. We will deliver or ship to anywhere in the US and international for a FEE. Call or email us for a shipping quote. CONTACT INFORMATION(336)789-1138 OR(336)577-3183 EMAIL US: allan@watsonenterprisesnc.com OUR
|
|
|
International Bulldozer TD-15C With Rippers 36inch Tracks 12ft blade
Runs great. Starts right up. No leaks. Serviced good solid machine. $1000 at close. Balance within 7 days by wire or cash on pickup. This is for sale local also. If a bid is placed it will run till sold. If no bids it might end. Thanks
|
|
|
2010 CASE 1650L Crawler Dozer Rippers Cab AC
2010 CASE 1650L Crawler Dozer Rippers Cab AC Condition: Used Make Case Model 1650L Model Year 2010 Hours 1840 Serial Number NADC16012 Blade. Bucket Type Blade- 6-Way Net Horsepower(HP) Over 130 Operating Weight 37.001- 38,000 lbs Track Type WT Transmission Hydrostatic Type Crawler Dozer 2010 CASE 1650L WT NADC16012 1840 Hours Enclosed Cab Heat& AC 156HP Case 667TA 37.000 lbs 85% U/C with 28" Pads 12' 10" PAT Blade Hydrostatic Drive Joystick Controls 5 Shank Ripper Rear Screen Contact: Greg Braswell(888) 350-3747 Location: 3670E HWY 67 Fort Worth. Texas 76059*Financing Available* Go to www.traktraders.com/finance.htm*Shipping Available* Email us at sales@traktraders.com for a quote. Satisfaction Guarantee* Email us at sales@traktraders.com for details Trak Traders Justin Marshall or Greg Braswell http:www.traktraders.com/ ... moreAbout Trak Traders* At Trak Traders. Inc. all of our equipment has been inspected and tested before ever being sold. It is our goal to provide you with quality heavy equipment to help get the job done or to provide the attachments you need to make the job easier. We offer a full line of graders. Bulldozers, excavators, mini excavators, backhoes, forklifts, wheel loaders, tractors, and trucks from trusted manufacturers such as: Caterpillar, John Deere, Hitachi, Komatsu, Volvo and others. We are sure you will be able to find the equipment you need to help you start or complete the job. If we do not have the heavy equipment in stock that you are looking for contact us and we will find it for you. We have two locations for your convenience: Fort Worth. Texas and Brandon, Mississippi*Financing Available* We offer several financing options. Go to and fill out a credit application today. Domestic& International Shipping Quotes* We can ship anywhere in the world. We can also containerize your equipment. Email us at for a fast competitive quote. General Terms& Conditions Please remember that Ebay is binding contract. Do not bid if you can not pay. You contact us anytime through o
|
|
|
International Harvester 500C Crawler Tractor Dozer 6 Way Blade Rippers Diesel
SKU: 905962 A: 00130000002zo0b O: 0065000000NJhsW PA: or View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a 1972 International 500C Crawler Tractor in good operating condition. This machine features 14” single grouser pads. 55" hydraulic rippers, 6-way 84” blade and a 2 speed manual transmission. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer ... moresatisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: International Model: 500C Year: 1972 Hours: 1904 on non functional hour meter. Actual hours unknown Serial Number: 4070016C003368 Track Type: Standard Transmission: Direct Drive Operating Weight: Approx 9.000 lbs Dimensions(Blade Straight) 164"L x 84"W x 87"H Features: 84” 6-Way blade 3-Shank 55" ripper OROPS Brushrake lugs and hook Drawbar Front/Rear work lights Auxiliary hydraulics Specifications: Engine Make: International Model: D-155 Horsepower: 44 Transmission Type: Direct drive Speeds: 2 Track Width: 14" Inspection Report: Overview Comments Overall Appearance Good for age Overall Operating Condition Good for age Engine Starter Operational Exhaust System Operational Cooling System Operational Fuel System Operational Oil Leaks Some residue and normal seepage noted around pans Fan/ Belts Average Comments Engine starts easily and runs well Drivetrain Transmission Fully functional. Tractor must be stopped to shift gears Clutch/Decelerato
|
|
|
2008 CASE 1150K WT Crawler Dozer, Enclosed Cab with Rippers
2008 CASE 1150K WT Crawler Dozer. Enclosed Cab with Rippers Condition: Used Make Case Model 1150K WT Model Year 2008 Hours 3365 Serial Number N8DC00270 Blade. Bucket Type Blade- 6-Way Net Horsepower(HP) 130 Operating Weight 30.001- 31,000 lbs Track Type Standard Transmission Hydrostatic Type Crawler Dozer 2008 CASE 1150K WT N8DC00270 3365 Hours Enclosed Cab Heat& AC 130HP Case 667TA 30.000 lbs 75% HD U/C with 30" Pads 11' PAT Blade Hydrostatic Drive Joystick Controls 3 Shank Ripper Runs out Great! Contact: Greg Braswell(888) 350-3747 Location: 3670E HWY 67 Fort Worth. Texas 76059*Financing Available* Go to to fill out an application. Shipping Available* Email us at for a quote. Satisfaction Guarantee* Email us at for details Trak Traders Justin Marshall or Greg Braswell http:www.traktraders.com/ About Trak Traders* At Trak Traders. ... moreInc. all of our equipment has been inspected and tested before ever being sold. It is our goal to provide you with quality heavy equipment to help get the job done or to provide the attachments you need to make the job easier. We offer a full line of graders. Bulldozers, excavators, mini excavators, backhoes, forklifts, wheel loaders, tractors, and trucks from trusted manufacturers such as: Caterpillar, John Deere, Hitachi, Komatsu, Volvo and others. We are sure you will be able to find the equipment you need to help you start or complete the job. If we do not have the heavy equipment in stock that you are looking for contact us and we will find it for you. We have two locations for your convenience: Fort Worth. Texas and Brandon, Mississippi*Financing Available* We offer several financing options. Go to and fill out a credit application today. Domestic& International Shipping Quotes* We can ship anywhere in the world. We can also containerize your equipment. Email us at for a fast competitive quote. General Terms& Conditions We require FULL payment within 7 days after the auction ends. We accept Cash In Person. Certified Check, or Bank Wire Transfer. We DO NOT ac
|
|
|
2002 John Deere 550 H LT Crawler Dozer with Rippers Used
Listing by Auction123.com copyright Auction123. Inc. National Vehicle- 1941 South 42nd St Omaha. NE 68105- 800-320-9557 ext: 0. Description. Basic Information Type: Crawler Dozer, Track Type: Standard, Blade. Bucket Type: Blade- 2-Way, Hours: 2900, Condition: Used, Stock Number: c491737, Model: 550 H LT Crawler Dozer with Rippers, Make: John Deere, Year: 2002, About, 2002 John Deere 550 H LT Crawler Dozer with Rippers. 4045 John Deere Diesel Engine. 19.000 Operating Weight 02 John Deere 550 H LT Crawler Dozer with Rippers. Priced to Sell Fast! Click here for an XL view of the above Image Prev. Next 1. 2. 3. 4. Terms, Terms of Sale Thank you for considering purchasing a vehicle listed by National Vehicle. Below are our terms of sale to protect all parties. By submitting an offer. Clicking the buy it now button, or accepting an offer you agree ... moreto the following terms. Buyers will contact the seller within 48 hours of auction ending to confirm payment and transport arrangements. If you do not contact the seller within 48 hours. We reserve the right to seek financial reimbursement for the time and fees incurred and may open a nonpaying bidder case. The seller must receive full payment within 7 days unless other approved arrangements are made. Ask all questions before bidding. National Vehicle is a third party marketing service and is not responsible for any accidental misrepresentation of any vehicle for sale due to typographical error or undisclosed flaws. National Vehicle is advertising this vehicle for a private seller. We make every attempt to represent vehicles accurately. And strongly recommend a vehicle inspection prior to bidding and/or purchasing any vehicle on the internet. This vehicle is sold as is. We cannot be held responsible for inaccuracies in the presentation and description of the vehicles we are marketing for private sellers. Please address all of your questions or concerns regarding this vehicle before you place a bid. Auctions containing errors will be relisted with corrected information.
|
|
|
1989 Case 855D track loader 4in1&rippers real clean
Real clean 855D U/C has recently been replaced 4in 1 bucket and 3 shank ripper cummins power loader runs and operates excellent good luck
|
|
|
450J - John Deere bulldozer w/ Vail rippers 3044hrs 10/13/2013
Low hours. Clean unit, fresh grease maintained. Comes with pin puller tool for cleaning/repair. 2007 John Deere 450 J LT.Serial# 450 J X 126484, 6 way blade, 97 inches wide, roll over protection(ORPS) 3 Shank Ripper, 3,050 Hours, 85% U/C, Brush Bars, Night Lights, Properly maintained, Fresh Oil, New Battery, All Articulating Blade Bushings Like new Condition. Location, Schertz, Texas 78132. Owner with clear Title; Price $39.999 Schertz. TX. 78132. Wade text/call 210-370-7653. Lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-141b91b19e7-0xf9-
|
|
|
John Deere 550B Dozer with Rippers 6 Way Blade in Excellent Condition
1985 John Deere Dozer 550B with Rippers runs Excellent 6 Way Blade Call Nick Crosby 1-541-579-7502 1-541-688-7502 home 1-541-689-7502 office address 29984 Kelso ave Eugene.Oregon 97402
|
|
|
2006 JOHN DEERE 650J DOZER RIPPERS 3400HRS 99HP 21000#
THIS DOZER RUNS AND WORKS REAL GOOD IT HAS 3434HRS AND VAIL RIPPERS THE U/C IS ONLY 35% OR SO AND THE CHARGE LIGHT STAYS ON WHEN YOU ARE USING IT BUT IT IS CHARGING ANY QUESTIONS CALL 1-405-381-3200 ITEM IS FOR SALE LOCALLY AUCTION MAY END EARLY IF SOLD
|
|
|
1997 John Deere 850C Dozer 6 Way Blade and Rippers
1997 John Deere 850 C Dozer Has been on ranch its whole life. Runs and operates great. Machine weight is around 42.000 lbs. Blade is 13 ft, but can angle it to reduce for hauling. Height is about 10 ft. 192 hp engine. More pictures available on request. Dozer is about 20 miles east of Santa Margarita(93453) We can help arrange shipping if needed. Send zip code and we can get you a quote.
|
|
|
2005 Caterpillar 953C Crawler Loader with Rippers; new U/C; 5174 HRS
ASSET: 2005 Caterpillar 953C Crawler Loader DESCRIPTION: Available for sale is a 2005 Caterpillar 953C crawler loader. It is powered by a Caterpillar 3126B diesel engine making 128 net HP. It currently shows 5174 hours(hours will accrue as we are using it around the yard) on a working meter. And was a contractor owned, TX machine. All hydraulics operate as they should- machine travels and changes gears as it should. Machine is optioned with a rear ripper. Operator station is in good condition for age/hours of machine. U/C has just been done. Please call for more information. QUESTIONS/CONTACT: For more details/questions. Please contact me at any time: Rick Sanchez(214) 683-1550 SHIPPING: We can help arrange shipping and help load out. But shipping costs are the responsibility of the buyer. Please feel free to ask us for a quote- please email ... moreus the destination zip code. Included pertinent information such as"residential" or"commercial" address, loading dock" capable, forklift" available, etc. We can provide containerization services as well for an additional cost- please contact us to discuss. Dimensions for shipping purposes: Width: 8' Length: 19' 6" Height: 10' 4" to top of cab) Weight: approx. 34.500 lbs OTHER: The machine is available for sale locally as well. And is subject to prior sale- please call to insure availability. The machine is a used machine. And as such is sold as-is, where-is. No warranties are expressed or implied. Hour meter readings are given as shown. Not responsible for typos- please feel free to call for a detailed description. It is located centrally in Dallas, TX and is available for inspection at anytime- it can be run at any time. TX buyers are subject to all applicable taxes, unless otherwise exempt. Equipment can be stored at our secured yard for up to 30 days. After 30 days a storage fee of $15/day will be charged. Equipment left for 90 days without previous arrangement will be considered abandoned and re-sold- proceeds to be refu
|
|
|
2003 CATERPILLAR Dozer D6NXL W/RIPPERS ! NO RESERVE AUCTION !
Clean 6-way blade. W/rippers, dual slope boards, 17K hours, ready for work. MS ripper. Power shift, Hightrack undercarriage, dual slope boards, 6-way blade, 17k hours, one owner, fleet maintained, Dimensions: Length 224, Width 132, Height 119, Weight(lbs) 36,610. Runs super! Selected Dimensions Dimensions B. WIDTH OVER TRACKS 8.2 ft in 2500 mm C. HEIGHT TO TOP OF CAB 10.2 ft in 3095 mm D. LENGTH OF TRACK ON GROUND 8.5 ft in 2581 mm E. GROUND CLEARANCE 1.3 ft in 394 mm F. LENGTH W/O BLADE 12.3 ft in 3740 mm Undercarriage G. TRACK GAUGE 6.2 ft in 1890 mm H. STANDARD SHOE SIZE 24 in 610 mm Specification Engine MAKE Caterpillar MODEL C6.6 ACERT NET POWER 145 hp 108.1 kw POWER MEASURED@ 2200 rpm DISPLACEMENT 439.4 cu in 7.2 L NUMBER OF CYLINDERS 6 Operational OPERATING WEIGHT 36610 lb 16605 kg FUEL CAPACITY 79 gal 299 L COOLING SYSTEM FLUID CAPACITY ... more9.2 gal 35 L HYDRAULIC FLUID CAPACITY 7.8 gal 29.5 L FINAL DRIVES FLUID CAPACITY 1.8 gal 7 L OPERATING VOLTAGE 12 V ALTERNATOR SUPPLIED AMPERAGE 70 amps Transmission TYPE powershift NUMBER OF FORWARD GEARS 3 NUMBER OF REVERSE GEARS 3 MAX SPEED- FORWARD 6.3 mph 10.1 km/h MAX SPEED- REVERSE 7.5 mph 12 km/h Undercarriage GROUND PRESSURE 7.5 psi 51.6 kPa GROUND CONTACT AREA 4882 in2 3.2 m2 STANDARD SHOE SIZE 24 in 610 mm NUMBER OF SHOES PER SIDE 40 NUMBER OF TRACK ROLLERS PER SIDE 7 TRACK GAUGE 6.2 ft in 1890 mm Standard Blade WIDTH 10.7 ft in 3272 mm HEIGHT 49 in 1244 mm CAPACITY 4.2 yd3 3.2 m3 CUTTING DEPTH 20.5 in 520 mm Dimensions LENGTH W/O BLADE 12.3 ft in 3740 mm WIDTH OVER TRACKS 8.2 ft in 2500 mm HEIGHT TO TOP OF CAB 10.2 ft in 3095 mm LENGTH OF TRACK ON GROUND 8.5 ft in 2581 mm GROUND CLEARANCE 1.3 ft in 394"no reserve auction" WE SHIP WORLDWIDE THE MACHINE IS LOCATED IN LOS ANGELES CA YOU ARE WELCOME TO TEST DRIVE THE MACHINE YOU CAN PICK UP THE MACHINE OR WE CAN PROVIDE SHIPPING IF YOU NEED A QUOTE PLEASE CONTACT ME WITH A ZIP CODE PAYMENT: WILL ONLY ACCEPT WIRE TRANSFERS. OR CASHIERS CHECKS UPON PICK UP, WIRES MUST BE CLEARED BEFORE PICK UP. IF YOU PAY B
|
|
|
2003 john deere dozer 450h With Rippers 2 Slope Board Very Clean 5900 Hours
2003 JOHN DEERE 450H CRAWLER DOZER W/RIPPER AND BANK SLOPER: 15.000 LB OPERATING WT. 4 CYL. DIESEL, 70 NET HP, HOURS READ 5,986 under carriage has 85% life left well taken care of QUESTION PLEASE CONTACT ME"no reserve auction" WE SHIP WORLDWIDE THE MACHINE IS LOCATED IN MONTEBELLO CA 90640 YOU ARE WELCOME TO TEST DRIVE THE MACHINE YOU CAN PICK UP THE MACHINE OR WE CAN PROVIDE SHIPPING IF YOU NEED A QUOTE PLEASE CONTACT ME WITH A ZIP CODE PAYMENT: WILL ONLY ACCEPT WIRE TRANSFERS. OR CASHIERS CHECKS UPON PICK UP, WIRES MUST BE CLEARED BEFORE PICK UP. IF YOU PAY BY PAY PAL WE WILL ADD 5% TO THE FINAL PRICE. IF PAYED BY CASHIERS CHECK OR WIRE TRANSFER NO ADDITIONAL CHARGE WILL BE ADDED. PAYMENT MUST BE MADE WITH IN 3 DAYS OF WINNING AUCTION Contact Info: Upon winning bid for equipment. Please e-mail complete contact info so we can prepare ... moreour company invoice for the equipment purchased. Please include company name, address, phone& fax numbers, and e-mail address so we can contact you regarding your purchase. We also need a ship-to address if it is different from the billing address. Non-Paying Bidders: By bidding on this auction you are stating that you understand Ebay's policies and our payment options and policies. Any Non-Paying bidder will be left negative feedback and appropriate actions will be taken through Ebay. Inspection: All specs and information stated in our advertisements are to the best of our knowledge Hours stated are the hours that are currently showing on the hour meter. We cannot guarantee machine hours since it is second-hand equipment. We are not responsible for errors and omissions. Returns: All items sold are sold in as is. Where is condition, as shown without warranty expressed or implied. Equipment is used with average wear and described the best to our ability. Once an item has shipped or been picked up it is non-returnable. Liability: Buyer agrees to hold seller harmless for any and all claims that arise out of the use of this equipment and to pay sellers legal fees. Buye
|
|
|
1982 DRESSER TD25 CRAWLER DOZER RIPPERS SU BLADE RUNS GREAT NEW TRACKS REDUCED!
1982 DRESSER TD25E. SU BLADE WITH SINGLE TILT, SS RIPPER, 75% UC, PADS AT 60% COMES WITH A BRAND NEW SET OF TRACKS, POWER SHIFT TRANS, VERY WELL MAINTINED, BLADE WILL NEED TO BE REPLACED OR REPAIRED(WAS RAN WITHOUT CUTTING EDGE) FIRES UP AND RUNS VERY WELL WITH LOTS OF POWER, RIGHT FRONT RAM WILL NEED TO BE REBUILT, NEW BATTERIES, PLEASE CALL 916-612-1855 FOR MORE INFO OR VISIT US ONLINE. INSPECTIONS ARE WELCOME OR YOU CAN COME AND DEMO MACHINE IN OUR YARD. WE WILL ASSIST IN TRANSPORT ANYWHERE IN THE WORLD AT BUYERS EXPENSE. PLEASE READ! Purchase Disclaimer: We make an effort to describe our equipment and condition to the best of our ability. Inspections are always highly encouraged. It is the buyers sole discretion to have a machine inspected prior to purchase. All equipment sold by Pacific Coast Iron LLC is sold in"AS IS. WHERE IS" ... morecondition and without any type of warranty expressed or implied. Machines listed on consignment with us are usually not physically inspected or operated by any of our staff. You can also call us at the office with any questions at 916-933-6050. We report the hours as they are displayed on the hour meter but we cannot guarantee the accuracy of the hours or the year models. Sales Tax: All CA customers must pay 8% sales tax with no exceptions.Unless we are presented a valid CA sellers permit at time of sale) Out of state buyers are responsible for paying the necessary tax in their own state. Returns: There are no returns or refunds on any used equipment we sell. All sales are final. Transport: Transport is the sole responsibility of the buyer. We do not include transport in any purchase. All machines must be picked up within 10 days of purchase. We work with a variety of transport companies and would be happy to give you a quote if needed. About Pacific Coast Iron LLC: Pacific Coast Iron LLC is a family owned and operated heavy equipment brokerage firm and dealer. We have been buying and selling heavy equipment in the construction industry for over 9 years and have developed m
|
|
|
2008 CASE 1650L WT CRAWLER DOZER RIPPERS 3053 HOURS!
Condition: Used Make CASE Model 1650L WT Model Year 2008 Hours 3052 Serial Number N8DC16026 Blade. Bucket Type Blade- 6-Way Net Horsepower(HP) 156 Operating Weight 37.001- 38,000 lbs Track Type Standard Transmission HYDROSTATIC Type Crawler Dozer 2008 CASE 1650L WT S/N: N8DC16026 3052 HOURS CAB AC& HEAT 156HP CASE ENGINE 12' 10" PAT BLADE MUTI SHANK RIPPER SWEEPS& REAR SCREEN 80% HD UNDERCARRIAGE SUPER NICE! Contact: Greg Braswell(888) 350-3747 Location: 3670E HWY 67 Cleburne. Texas 76031*Financing Available* Go to to fill out an application. Shipping Available* Email us at for a quote. Satisfaction Guarantee* Email us at for details Trak Traders Justin Marshall or Greg Braswell http:www.traktraders.com/ About Trak Traders* Our goal is to provide our customers with quality used equipment and excellent customer service. Customer ... moresatisfaction is our number 1 priority. If we don't have what your looking for. Then just give us a call and we can find it. Whether your looking for dozers, excavators, graders, backhoes, wheel loaders, skid steers, lifts, we can get it for you. We deal in all the brands of equipment like Caterpillar, John Deere, Komatsu, Hitachi, Terex, ect. We have two locations for your convenience: Fort Worth. Texas and Brandon, Mississippi*Financing Available* We offer several financing options. Go to and fill out a credit application today. Domestic& International Shipping Quotes* We can ship anywhere in the world. We can also containerize your equipment. Email us at for a fast competitive quote. General Terms& Conditions We require FULL payment within 7 days after the auction ends. We accept Cash In Person. Certified Check, or Bank Wire Transfer. We DO NOT accept paypal or credit cards. We have many financing options available on our website. Please secure all financing before you bid. All of our equipment is for sale locally and can be ended at anytime. Fees& Taxes Mississippi residents pay 7% sales tax or 1.5% sales tax for farmers on equipment. No tax on Vehicles.
|
|
|
International TD340 Crawler Bull Dozer Catapillar CAT Catapiller Rippers 6-Way
Please look at the pics carefully. They will give you a really good view of the crawler overall. This description includes A LOT of pictures and a verbal description as well. Please Scroll ALL the way down. Please READ the auction details and description carefully and in its entirety. Also note our payment terms before bidding: If you are new to EBAY. Please call us, we will help. Our number is listed below! This is important. Communication via phone. Email, message.within 12 hours of close of auction. Payment in full within 3 days from close of auction. LOW RESERVE We have attempted to describe the item in detail. We do this so you can get a good idea as to the condition of the item along with pictures. Please look at the pictures carefully. If there is anything you want to know, please ask, whether message, email, or by phone. Feel free ... moreto call with any questions too. We don't mind. Also, if you are in our general area, you are always welcome to come and view it personally. WE ARE LOCATED IN LEWISTON. CALIFORNIA I am a one finger typist.so please if you have detailed or many questions. Please call.Thanks 530-778-3747. You are bidding on a 1960 International Crawler TD340(I think it is 1960) according to SN# TD340-4015 anyway. THIS DOES HAVE A ROLL BAR AND OPERATOR FLOOR PLATE(neither are pictured. But included) Also we have the TD340 Emblems included but not pictured. It has Hard to find 6 way Blade and Rippers! 6 way blade is in really good shape Engine: runs good 4 cylinder liquid-cooled vertical L head 166 ci Diesel Weight: 5800 lbs without rippers! 15 Gallon fuel tank(does have a little leak) Hydraulics all work good Tracks are about 14" There is a small leak in the swivel cylinder of the blade also. As you can see in the pics. scroll down to see larger better pics) the tracks are extremely good. CAT mechanic says it shows very little wear. CAT mechanic will look at it again this week. It does steer hard left. He is going to try to determine if it needs a clutch or just an adjustment. We will
|
|
|
2003 CAT CATERPILLAR D5G XL CRAWLER DOZER LOW HOURS NEW MOTOR CAB RIPPERS
VERY NICE 2003 CATERPILLAR D5G XL CRAWLER DOZER. ONLY 500HRS ON NEW MOTOR(ALL WORK VERIFIABLE WITH JOHNSON CAT) 2332 HOURS ON CHASSSIS, VERY CLEAN UNIT, CAB WITH HEAT/AC DUAL SLOPEBOARDS PAT BLADE MS RIPPER UC AT 75% INSPECTIONS WELCOME! CALL 916-612-1855 OR VISIT for more info. PLEASE READ! Purchase Disclaimer: We make an effort to describe our equipment and condition to the best of our ability. Inspections are always highly encouraged. It is the buyers sole discretion to have a machine inspected prior to purchase. All equipment sold by Pacific Coast Iron LLC is sold in"AS IS. WHERE IS" condition and without any type of warranty expressed or implied. Machines listed on consignment with us are usually not physically inspected or operated by any of our staff. You can also call us at the office with any questions at 916-933-6050. ... moreWe report the hours as they are displayed on the hour meter but we cannot guarantee the accuracy of the hours or the year models. Sales Tax: All CA customers must pay 7.5% sales tax with no exceptions.Unless we are presented a valid CA sellers permit at time of sale) Out of state buyers are responsible for paying the necessary tax in their own state. Payment: Payment must be received in full within 5 business days. We accept Wire Transfers. Cashiers Check, and Cash up to $10,000. Returns: There are no returns or refunds on any used equipment we sell. All sales are final. Transport: Transport is the sole responsibility of the buyer. We do not include transport in any purchase. All machines must be picked up within 10 days of purchase. We work with a variety of transport companies and would be happy to give you a quote if needed. About Pacific Coast Iron LLC: Pacific Coast Iron LLC is a family owned and operated heavy equipment brokerage firm and dealer. We have been buying and selling heavy equipment in the construction industry for over 9 years and have developed many relationships with various dealers. Buyers, and other construction related resources. Pacific Coast Iron has grow
|
|
|
2004 CAT CATERPILLAR D5G XL CRAWLER DOZER LOW HOURS OROPS RIPPERS HEATER
2004 CAT D5GXL CRAWLER DOZER WITH ONLY 3900 HRS. 3 SHANK RIPPER, 60% UC, PAT BLADE, HEATER, OROPS, JOYSTICK CONTROLS, WE PURCHASED THIS UNIT FROM PETERSON CAT. WAS USED ON A MOTORCROSS TRACK ALMOST ITS ENTIRE LIFE. VERY CLEAN. CALL 916-612-1855 OR VISIT US AT FOR MORE INFO. PLEASE READ! Purchase Disclaimer: We make an effort to describe our equipment and condition to the best of our ability. Inspections are always highly encouraged. It is the buyers sole discretion to have a machine inspected prior to purchase. All equipment sold by Pacific Coast Iron LLC is sold in"AS IS. WHERE IS" condition and without any type of warranty expressed or implied. Machines listed on consignment with us are usually not physically inspected or operated by any of our staff. You can also call us at the office with any questions at 916-933-6050. We report ... morethe hours as they are displayed on the hour meter but we cannot guarantee the accuracy of the hours or the year models. Sales Tax: All CA customers must pay 7.5% sales tax with no exceptions.Unless we are presented a valid CA sellers permit at time of sale) Out of state buyers are responsible for paying the necessary tax in their own state. Payment: Payment must be received in full within 5 business days. We accept Wire Transfers. Cashiers Check, and Cash up to $10,000. Returns: There are no returns or refunds on any used equipment we sell. All sales are final. Transport: Transport is the sole responsibility of the buyer. We do not include transport in any purchase. All machines must be picked up within 10 days of purchase. We work with a variety of transport companies and would be happy to give you a quote if needed. About Pacific Coast Iron LLC: Pacific Coast Iron LLC is a family owned and operated heavy equipment brokerage firm and dealer. We have been buying and selling heavy equipment in the construction industry for over 9 years and have developed many relationships with various dealers. Buyers, and other construction related resources. Pacific Coast Iron has grown tre
|
|
|
2005 Caterpillar 963C Crawler Loader with Rippers; 4353 HRS
ASSET/EQUIPMENT: 2005 Caterpillar 963C Crawler Loader S/N: BBD012* DESCRIPTION: Available for sale is a nice. 2005 Caterpillar 963C crawler loader with rippers. TX machine off the job from a mid-size heavy/highway general contractor doing routine fleet rotation. It is powered by a reliable Caterpillar 3126B diesel engine making 158 net HP. Machine currently shows 4353 HRS on a working meter(hours will accrue as we use around the yard) All hydraulics work as they should. And the machine travels and counter-rotates as it should. Optioned with a ripper. It is a cabbed machine with working heat and working A/C, and is in average condition for hours/age of machine. U/C in average condition for hours/age of machine. Nice example from a reputable contractor. Machine is ready to work. QUESTIONS/CONTACT: For more details/questions. Please contact ... moreme at any time: Rick Sanchez(214) 683-1550 SHIPPING: We can help arrange shipping and help load out. But shipping costs are the responsibility of the buyer. Please feel free to ask us for a quote- please email us the destination zip code. Included pertinent information such as"residential" or"commercial" address, loading dock" capable, forklift" available, etc. We can provide containerization services as well for an additional cost- please contact us to discuss. Dimensions for shipping purposes: Width: 8' 6" Length: 25' 0" Height: 11' 1" Weight: approx. 45.000 lbs OTHER: The machine is available for sale locally as well. And is subject to prior sale- please call to insure availability. The machine is a used machine. And as such is sold as-is, where-is. No warranties are expressed or implied. Hour meter readings are given as shown. Not responsible for typos- please feel free to call for a detailed description. It is located centrally in Dallas, TX and is available for inspection at anytime- it can be run at any time. TX buyers are subject to all applicable taxes, unless otherwise exempt. Equipment can be stored at our secure
|
|
|
John Deere Dozer 550B Long track with Rippers Runs Great with 6 Way Blade
John Deere 550B Dozer with Rippers in Great Shape 6 WAy Blade Call Nick 1-541-579-7502 cell or 541-688-7502 home Eugene.Oregon 97402
|
|
|
2002 CAT CATERPILLAR D5G XL CRAWLER DOZER LOW HOURS OROPS RIPPERS HEATER
The machine starts and idles perfectly. No oil leaks. Low diesel consumption, no black smoke. New blades, new segments. The ripper very slowly lowers while machine is working, so it needs adjustment. Tracks on right side need adjustment. Invoice description. 2002 CATD5G SIN FDH00815 HRS. 3550 D5G XL TRACTOR MA 3 DSG XL TRACTOR LIGHTS. ROPS, CANOPY SEAT, COMJ70RT, SUSP, VINYL HEATER,ROPSCANOPY J\IR CLEANER, TURBINE BATTERIES, HEAVY DUTY STARTING AID, ETHER HYDRAULICS, 4 VALVE BLADE, D5G XL GUARD, IDLER,ROCK SWEEP, W/LIGHTS(CA.I'IOPY) Purchase Disclaimer: We make an effort to describe our equipment and condition to the best of our ability. Inspections are always highly encouraged. It is the buyers sole discretion to have a machine inspected prior to purchase. All equipment sold by ADESA Golf and Land Development. LLC is sold in"AS ... moreIS, WHERE IS" condition and without any type of warranty expressed or implied. You can also call us with any questions at 210-771-6954. We report the hours as they are displayed on the hour meter but we cannot guarantee the accuracy of the hours or the year models. Transport is the sole responsibility of the buyer. We do not include transport in any purchase. All machines must be picked up within 10 days of purchase. We work with a variety of transport companies and would be happy to give you a quote if needed. Payment must be received in full within 5 business days. We accept Wire Transfers. Cashiers Check, and Cash up to $10,000. All CA customers must pay 7.5% sales tax with no exceptions.Unless we are presented a valid CA sellers permit at time of sale) Out of state buyers are responsible for paying the necessary tax in their own state.
|
|
|
2003 JOHN DEERE 650H XLT, RIPPERS, A/C, HEAT - CAT - CRAWLER DOZER - CATERPILLAR
Tuff Machinery 3053 S US HWY 281 Marble Falls. TX 78654 512-627-2730 Clint Roark clintr6565@yahoo.com 512-997-8949 Rob Roark tuffmachinery@yahoo.com MACHINE DESCRIPTION 2003 John Deere 650H XLT. RIPPERS, A/C& HEAT, 2698 HOURS, UNDERCARRIAGE 95% MACHINE IS READY TO WORK, VERY CLEAN! S/N T0650HX913022 363 mm, Dimensions. A. LENGTH W/ BLADE, 14 ft in, 4254 mm, B. WIDTH OVER TRACKS, 6.6 ft in, 2006 mm, C. HEIGHT TO TOP OF CAB, 9.1 ft in, 2768 mm, D. LENGTH OF TRACK ON GROUND, 7.7 ft in, 2337 mm, E. GROUND CLEARANCE, 1.2 ft in, 363 mm, Undercarriage. G. TRACK GAUGE, 5.1 ft in, 1550 mm, H. STANDARD SHOE SIZE, 18 in, 457 mm, Engine, MAKE, John Deere, MODEL, 4045T, NET POWER, 90 hp, 67 kw, POWER MEASURED@ 2200 rpm, MAX TORQUE, 306 lb ft, 414 Nm, DISPLACEMENT, 276 cu in, 4.5 L, TORQUE MEASURED@ 1200 rpm, NUMBER OF CYLINDERS, 4, ASPIRATION, Altitude-compensating ... moreturbocharger, Operational, OPERATING WEIGHT, 18640.1 lb, 8455 kg, FUEL CAPACITY, 47 gal, 178 L, COOLING SYSTEM FLUID CAPACITY, 4.2 gal, 16 L, ENGINE OIL CAPACITY, 3.7 gal, 14 L, HYDRAULIC FLUID CAPACITY, 8.5 gal, 32.2 L, POWERTRAIN FLUID CAPACITY, 11.3 gal, 42.7 L, FINAL DRIVES FLUID CAPACITY, 1.7 gal, 6.6 L, OPERATING VOLTAGE, 12 V, ALTERNATOR SUPPLIED AMPERAGE, 65 amps, Transmission, TYPE, Hydrostatic, MAX SPEED- FORWARD, 5 mph, 8 km/h, MAX SPEED- REVERSE, 5 mph, 8 km/h, Undercarriage, GROUND PRESSURE, 5.6 psi, 38.6 kPa, GROUND CONTACT AREA, 3312 in2, 2.1 m2, STANDARD SHOE SIZE, 18 in, 457 mm, NUMBER OF SHOES PER SIDE, 40, NUMBER OF TRACK ROLLERS PER SIDE, 7, TRACK PITCH, 6.7 in, 170 mm, TRACK GAUGE, 5.1 ft in, 1550 mm, Hydraulic System, PUMP TYPE, Gear, RELIEF VALVE PRESSURE, 3000 psi, 20670 kPa, PUMP FLOW CAPACITY, 15 gal/min, 57 L/min, Standard Blade, WIDTH, 8.8 ft in, 2667 mm, HEIGHT, 36.7 in, 933 mm, CAPACITY, 2.6 yd3, 2 m3, BLADE ANGLE(BOTH DIRECTIONS) 22.2 degrees, CUTTING DEPTH, 19.7 in, 500 mm, Dimensions, LENGTH W/ BLADE, 14 ft in, 4254 mm, WIDTH OVER TRACKS, 6.6 ft in, 2006 mm, HEIGHT TO TOP OF CAB, 9.1 ft in, 2768 mm, LENGTH OF TR
|
|
|
2012 Cat D6T XL Dozer with rippers CAB FIRE!!
2012 Cat D6T with Rippers Cab Fire Located Near Dallas.Texas Call Nick Crosby 1-541-579-7502 cell 1-541-689-7502 Ncauto Ordealer#7515
|
|
|
2012 Caterpiller D6T XL Dozer with Rippers CAB FIRE!!
2012 Caterpiller D6T with Rippers Cab Fire from Vandels Serial#CAT00D6TPGMK00693 Located Near Dallas.Texas Call Nick Crosby 1-541-579-7502 cell 1-541-579-7501 1-541-689-7502 office Ncauto Ordealer#7515
|
|
|
Caterpiller D6T XL Dozer 2012 Model with Rippers CAB FIRE!! 2448.7 Hours
2012 Caterpiller D6T XL 2448.7 Actual Hours with Rippers Cab Fire from Vandels Serial#CAT00D6TPGMK00693 Located Near Dallas.Texas Call Nick Crosby 1-541-579-7502 cell 1-541-579-7501 1-541-689-7502 office Ncauto Ordealer#7515
|
|
|
2000 Caterpillar 963C Crawler Loader with Rippers
ASSET/EQUIPMENT: 2000 Caterpillar 963C Crawler Loader S/N: 2DS00702 DESCRIPTION: Available for sale is a 2000 Caterpillar 963C crawler loader. One owner. TX machine from a medium sized excavation company. It is powered by a reliable Caterpillar 3126B diesel engine making 158 net HP. All hydraulics work as they should. And the machine travels and counter-rotates as expected for hours/age of machine. It is a cabbed machine and is in good condition for hours/age of machine. U/C in below average condition for hours/age of machine and exhibits wear(U/C at approx. 35% Machine is optioned with a multi-tined ripper. Machine is off the job and ready to work. QUESTIONS/CONTACT: For more details/questions. Please contact me at any time: Rick Sanchez(214) 683-1550 SHIPPING: We can help arrange shipping and help load out. But shipping costs are the responsibility ... moreof the buyer. Please feel free to ask us for a quote- please email us the destination zip code. Included pertinent information such as"residential" or"commercial" address, loading dock" capable, forklift" available, etc. We can provide containerization services as well for an additional cost- please contact us to discuss. Dimensions for shipping purposes: Width: 8' 6" Length: 22' 6" Height: 11' 2" Weight: approx. 46.000 lbs OTHER: The machine is available for sale locally as well. And is subject to prior sale- please call to insure availability. The machine is a used machine. And as such is sold as-is, where-is. No warranties are expressed or implied. Hour meter readings are given as shown. Not responsible for typos- please feel free to call for a detailed description. It is located centrally in Dallas, TX and is available for inspection at anytime- it can be run at any time. TX buyers are subject to all applicable taxes, unless otherwise exempt. Equipment can be stored at our secured yard for up to 30 days. After 30 days a storage fee of $15/day will be charged. Equipment left for 90 days without previous arra
|
|
 |