|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$69.99 Shipping Condition: New Location: 朝阳区, China Stepper motor: Suitable for two-phase 4 wire stepper motor (current maximum 4.5A). Angle mode: 1 to 20 at any angle (0.1 degrees / step). Weight: 3.5KG. ... moreReduction ratio: 1 to 999 applies: 1. Type: CRS8030A.
Buy It Now
$69.99 Shipping Condition: New Location: China Press the mode key (select angle) → press the setting key → use the arrow keys to input the angle value in the serial number → press the OK key → use ... morethe arrow ↑ key. Turn on the machine → press the mode key (select equal fraction) → press the setting key → use the arrow to enter the number of equal parts → press the OK key → the setting is complete → press the run or start key to run the motor.
Buy It Now
$6.00 Shipping Condition: New Location: Chino, United States Specification Material: Cast Steel Color: Green Module: PF70-5C Indexing Accuracy: ± 4' Capacity for Standard 5C Collet: 1-1/8" Height of Center: 70mm/2-3/4" ... moreSpindle Travel: 2-1/16" Spindle Cone Radial Runout: 0.010mm/0.0004" The Radial Center of the Spindle is Bouncing (25mm/0.98" From the Spindle End): 0.03mm/0.0012" The Parallelism of the Center Line of the Spindle to the Bottom Surface: 0.02mm, 0.0008'' Product Size（L*H）: 23.6*13.4cm/9.29*5.28'' Package Size: 22*14*14cm/8.66*5.51*5.51'' Gross Weight: 5.8kg/12.79lbs Package Included 1*Spin Indexing Fixture 1*English Manual All Accessories for Use.
Buy It Now
Free Shipping Condition: Used Location: East Jordan, United States Hainbuch 52BZI Clamping Head. Part # SK52BZIR32.77. On orders before 1pm EST M-F.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Semi-Universal Dividing Head is a simple Index Center and can be used for direct and indirect dividing. With rotary indexer, the 24 quick-dividing holes ... morecan complete BS-2A 2,3,4,6,8,12,24 division indexing.
Buy It Now
$8.95 Shipping Condition: Used Location: Jasper, United States Hardinge Model HV-4, 5C Collet Indexing Head Spindle Nut OEM #HV-140-B. Good used condition with good threads & knurl. Part will function as designed.
Buy It Now
$275.59 Shipping Condition: Used Location: Pottstown, United States Included 6k collet draw bar, spindle tapered on both sides for tooling to mount. Approximate 5 1/2 CL base to spindle @ 90 degree. 10" Max Chuck L-W Chuck ... moreCo. 2 1/4 x 10 TPI Threaded Spindle with what looks to be MT4 taper inside.
Buy It Now
$18.95 Shipping Condition: Used Location: Jasper, United States Good used condition with smooth precision surfaces. Part will function as designed.
Buy It Now
$7.83 Shipping Condition: Used Location: Lorain, United States Used in good condition.
Buy It Now
$20.00 Shipping Condition: Used Location: Syracuse, United States This is a Yuasa News Int'l INC. New York N.Y. Dividing Head. Made in Japan. It is lightly. If ever used and looks like new. It does not come with ... morethe original box or a manual.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Dividing head plate, double sided.
Buy It Now
$125.00 Shipping Condition: Used Location: Clare, United States Kearney & Trecker rotary indexing dividing head. Specifications: Model: Unknown Center Height: 5-1/4" Positioning: Horizontal or Vertical Condition: Good ... moreworking Condition NOTE: Missing crank handle Please contact us directly if you need overnight shipping! M.I.S. Industrial contact info: Office: [phone removed by eBay] info (at) misindustrial.com Also please check out our website for FREE shipping!.
Buy It Now
$94.44 Shipping Condition: Used Location: Middlebourne, United States Nice clean condition for its age. All products are as is.
Buy It Now
$37.86 Shipping Condition: Used Location: Houston, United States Now is your chance to save even more money! ALL DIFFERENT SIZES AND TYPES. These cutters appear to be in great shape. Price is for the lot. If you can ... moreuse the cutters, lets make a deal! HEAD #1 AND # 2 2 1/4” (2).
Buy It Now
$37.86 Shipping Condition: Used Location: Houston, United States Now is your chance to save even more money! ALL DIFFERENT SIZES AND TYPES. These cutters appear to be in great shape. Price is for the lot. If you can ... moreuse the cutters, lets make a deal! HEAD #1 AND # 2 2 1/4” (2).
Buy It Now
$37.86 Shipping Condition: Used Location: Houston, United States Cat50 C8-A390.455-50 100. Sandvik Tool holder Extention C8-R820E-AA3072A. CUTTER R820E-AR22 SCFC. REALLY NICE MLLING CUTTER.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States BRIDGEPORT#4 INDEXING PLATE. This plate has 5 rows of holes. Starting from the outer row in the hole count is: 59- 46- 38- 32- 26. The OD of the plate ... moreis 5.5 inches. The center hole has a diameter of 1.25 inches. The mounting hole centerline is 2.25 inches. Any questions or comments please email me early. No international sales. We ship to U.S.A. addresses only. We will gladly combine items to save shipping expense. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$163.80 Shipping Condition: Used Location: Fruita, United States Up for sale is a L&W Chuck Indexing Dividing/Head. Shows signs of use with scuffs, scratches and missing paint. Works as it should.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States *NEEDS INDEXING PIN LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM IT IS USED WORKS HOW IT SHOULD BUT NEEDS NEW INDEXING PIN HANDLE QUESTIONS OR ... moreCONCERNS FEEL FREE TO ASK AND I WILL DO MY BEST TO ANSWER ANY QUESTIONS BOX 15"×15"×15" 97 lb Local pickup 90631 I WILL HELP AND ASSIST AND I WILL BUILD A BOX TO ENSURE THAT THE I AM ARRIVES THE SAME WAY IT LEAVES FIRE IS RESPONSIBLE FOR ALL SHIPPING CHARGES I WILL ASSIST WITH BUILDING A BOX FOR THE ITEM
Buy It Now
$8.95 Shipping Condition: Used Location: Jasper, United States Hardinge Model HV-4, 5C Collet Indexing Head Spindle Nut Lock OEM #HV-141-B and Lock Screw OEM #HV-124. Good used condition with good threads & knurl. ... moreParts will function as designed.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
$20.98 Shipping Condition: Used Location: Waterford, United States NO CRACKS OR REPAIRS. THERE ARE SCUFFS AND SCRATCHES FROM USE.
Buy It Now
$15.10 Shipping Condition: Used Location: Miami, United States Dividing Head Indexing Plate 7-1/2" OD 1-3/4" ID.30 Thick 37. 39, 41, 43, 47, 49 Condition: Good Questions? call Metro Machine& Tool 732-650-0666
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
$8.95 Shipping Condition: Used Location: Jasper, United States Good used condition and will function as designed.
Buy It Now
$7.83 Shipping Condition: Used Location: Lorain, United States Used in good condition.
Buy It Now
$15.00 Shipping Condition: Used Location: Somonauk, United States BRIDGEPORT#4 INDEXING PLATE. This plate has 5 rows of holes. Starting from the outer row in the hole count is: 59- 46- 38- 32- 26. The OD of the plate ... moreis 5.5 inches. The center hole has a diameter of 1.25 inches. The mounting hole centerline is 2.25 inches. Any questions or comments please email me early. No international sales. We ship to U.S.A. addresses only. We will gladly combine items to save shipping expense. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States Hardinge Model HV-4, 5C Collet Indexing Head Retaining Ring OEM #HV-123 with all (6) mounting Screws OEM #HV-126. Good used condition with good threads ... more& knurl. Parts will function as designed.
Buy It Now
$37.86 Shipping Condition: Used Location: Houston, United States Now is your chance to save even more money! ALL DIFFERENT SIZES AND TYPES. These cutters appear to be in great shape. Price is for the lot. If you can ... moreuse the cutters, lets make a deal! HEAD #1 AND # 2 2 1/4” (2).
Buy It Now
$59.99 Shipping Condition: New Location: China Model number: CRS8030A (Chinese display). Equal portion mode: 1~999 equal portions. Stepping motor: suitable for two-phase 4-wire stepping motor (current ... moremaximum 4.5A).
Buy It Now
$189.20 Shipping Condition: New Location: China The spindle core of this simple indexing head is not equipped with bearings.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Descriptions: BRAND NEW 5C Indexing Spin Jigs Capacity for Standard 5C Collet: 1-1/8" Height of Center: 2-3/4" Spindle Travel: 2-1/16" ... more36 Indexing Holes Plate 10 Vernier Indexing Holes Over All Dim: 9-1/2" x 5" x 5-1/4" Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $58.88(1st unit) + $44.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buyers have 72 hours to inspect item for damages and must contact the seller immediately if shipping damage is discovered. All returns required an RMA#Return Authorization Number) from seller or package will be refused. No returns for any reason after that. THANK
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States Good used condition with smooth keyway groove and precision surfaces. Part will function as designed.
Buy It Now
Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
Condition: Used Location: Mountainair, United States Walter type Rts 500 TG Rotary Table indexing tilting 19.5" EBAY DOES NOT CURRENTLY ALLOW INTERNATIONAL LISTING OF ITEMS OVER 150 POUNDS BUT WE WILL ... moreCONSIDER AN INTERNATIONAL SALE-YOU MUST CONTACT US FRIST THOUGH) 20 CATEGORIES for other items of interest. Currently over store items listed. 2373 In the image below. It is cranked up past 90 degrees. Walter type Rts 500 TG Rotary Table It weighs about 1000 pounds. Other similar items may be available listed separately or on request. Might be just what you need for your very serious rotary table application. If you want what you see. Make a bid now so you don't forget and miss it. If an item is already buy-it-now only-you can make and offer for us to consider. If you really need what you see, do the buy-it-now before someone locks you out of it. All items are subject to change in description. Sale or price increase prior to a bid being placed. Condition looks very good and functional with little use/abuse. It has been a bit weathered and the original paint chipped thus repainted. Everything seems to work to our knowledge. We only have the one index plate and we don't have a handle for the tilt angle crank-shaft. Sold-where-is. What you see is what you get( but does not include unrelated items that may be in an image such as scale. Scale head, table, floor, ceiling, forklift, building, test meter, etc. We generally do not have specific expertise with regard to the items we sell(and would be biased if we did) so check with someone who is an expert. If you are not, before buying. We are in the Desert Southwest so items may need dusting/cleaning when they arrive. Use the ebay messaging system at the top of the page if you need to ask a question. If you don't get a response within a business day. Click the following link to Click to see our other current auctions. Click to see items from the past 30 days-might be something you need that did not sell. Click to see our Ebay store. Click to check for last minute updates and cavlon99 news TERMS& CONDITION
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
Free Shipping Condition: New Location: China It will be your perfect assistant to machine the flutes of a milling cutter, cut the teeth of a gear, curved mill slots, or drill a bolt hole circle around ... morethe circumference of a part. It is particularly useful when the workpiece is relatively long and slender.
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States Manufactured from quality tool steel- fully hardened and precisely ground taper MT2 shank. The Bore is also internally ground in which the spring loaded ... morepoint is fitted & travel up & down. The shank has a spring loaded center and self adjusted through the spring load while tapping. The overall length of the tool is 145 mm. Shank is MT2 -Teng Style.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States
Buy It Now
$303.23 Shipping Condition: Used Location: Canada
Buy It Now
$17.75 Shipping Condition: Used Location: Boonville, United States Dividing Head for Milling Machine, Lathe Table Watchmakers Tool ??. Twentieth century clocks typically drew inspiration from earlier styles, although ... morethe U.S. made, electrically-powered “Eureka” clock is especially indicative of the years leading up to the First World War.
Buy It Now
$350.00 Shipping Condition: Used Location: Tippecanoe, United States YUASA TPDX-24 5C DUAL HEAD PNEUMATIC AIR ROTARY 4th AXIS INDEXER. Condition is Used. I was told this was working when removed from service. Will need ... morecleaned up as it has dried oil mist on it from sitting on a shelf in a manufacturing facility. No controller included. Shipped freight. Please allow extra time for arranging freight shipping. Cost of freight shipping is $350. Local pickup is available for free.
Buy It Now
$7.83 Shipping Condition: Used Location: Lorain, United States Used in good condition.
Buy It Now
$50.00 Shipping Condition: Used Location: Rainier, United States ELLIS A5726 5" DIVIDING HEAD Indexing Head. Has 1.75" - 8 TPI, with 4 Dividing Plates ( numbers 1-4, & 5" dia.) & 2 Back Plates. Good working used condition ... morewith wear, dirt, and some light surface rust in spots. See all pics for details and condition. Ships only to the lower 48 states.
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
Free Shipping Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Retired Machinist Tool maker box find. Condition is "Used".
Buy It Now
$12.95 Shipping Condition: Used Location: Jasper, United States
Buy It Now
$7.83 Shipping Condition: Used Location: Lorain, United States Used in good condition.
Buy It Now
$23.52 Shipping Condition: Used Location: Carson, United States Used yuasu brand ? TAILSTOCK
Buy It Now
$99.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches. A bit greasy, not sure on the model. Please see photos for details. Thanks for looking Unit weighs 100 ... morepounds as picturedShipping price to the lower 48 only
Buy It Now
$57.63 Shipping Condition: New Location: Beaver Falls, United States We have been blessed to serve generations of tool enthusiasts and we look forward to helping YOU find your next tool!
Buy It Now
$17.10 Shipping Condition: Used Location: Santa Cruz, United States
Buy It Now
$199.00 Shipping Condition: New Location: China
Buy It Now
$69.99 Shipping Condition: New Location: China Press the mode key (select angle) → press the setting key → use the arrow keys to input the angle value in the serial number → press the OK key → use ... morethe arrow ↑ key. Turn on the machine → press the mode key (select equal fraction) → press the setting key → use the arrow to enter the number of equal parts → press the OK key → the setting is complete → press the run or start key to run the motor.
Buy It Now
$262.00 Shipping Condition: New Location: China C. take 125mm chuck. A. take 100mm chuck. Installation chuck: K11-100. Installation chuck: K11-125. B. 100 chuck no tail.
|
|
|
|
Cincinnatti Indexing Rotary Table Dividing Head
8" chuck. Dividing plate is broken. But it still turns okay when we tried it. We are selling it as is. Check our store for many other related tooling and machine items: http:stores.ebay.com/TahanMachinery Tahan Machinery(909) 590-4327 13338 Monte Vista Ave. Chino, CA, 91710 Hours: 8:00 AM- 5:00 PM
|
|
|
56" BULLARD HI COLUMN VERTICAL BORING MILL - 4 POSITION POWER INDEXING RAM HEAD
56" BULLARD DYNATROL HI COLUMN VERTICAL BORING MILL w/ 4 POSITION POWER INDEX SWIVELLING RAM HEAD& SIDE HEAD NEW 1968/ GREAT CONDITION! DIAMETER OF 3 JAW CHUCK TABLE- 56" MAX. SWING. SIDE HEAD BELOW TABLE- 68" MAX. SWING. SIDE HEAD IN WORKING POSITION- 62" APPROX. WORK HEIGHT TO RAIL FROM CHUCK- 60" 20 TABLE SPEEDS- 7 TO 250 RPM VARIABLE FEED RANGE- 001" TO.250 IPR POWER FEEDS AND RAPID TRAVERSE TO BOTH RAM AND SIDE HEADS 4 POSITION RAM HEAD SWIVELLING 30 DEG. IN EITHER DIRECTION AND WITH 60" TRAVEL ADJUSTABLE RAIL; SIDE HEAD MAIN DRIVE MOTOR- 60 HP 230/460/3/60 APPROXIMATE MACHINE WEIGHT- 71.000 LBS APPROXIMATE MACHINE DIMENSIONS- 152"LR) X 122"FB) X 130"H) EQUIPPED WITH- 3 JAW POWER CHUCK. 4 BOLT ON HEAVY DUTY JAWS 4 POSITION POWER INDEXING RAM HEAD. CHROME WAYS HARDENED& GROUND ... moreCROSS FEED SCREW. PENDANT CONTROL 4 WAY TOOL POST ON SIDE HEAD. HIMES MACHINERY PHONE- 888-803-2496- WWW.HIMESMACHINERY.COM FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE" http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING* WE ARRANGE FREIGHT TO ANYWHERE IN THE USA. MEXICO& CANADA*
|
|
|
Genuine Brown & Sharpe Universal Dividing Head - B&S Indexing Head
This is a vintage Brown and Sharpe divider. 8" long. Works great. Has some rust throughout. Please note pictures. Posted with
|
|
|
Unimat DB200/SL1000 Emco Dividing Head/Indexing Attachment. Hammerteon Green
Good Shape. This needs a Indexing Plate to be usable.
|
|
|
HAAS KENNAMETAL 4TH-AXIS 5C DIGITAL INDEXING HEAD with CONTROL S5C Manual Closer
Made in the U.S.A. by Haas Automation Inc. of Oxnard. CA. This is a 4th-Axis 5C Automatic Digital Indexing Head w/ Control in excellent working condition. Looks and works like new. Features: Manual Collet Closer. Automatic Digital Indexing Head Control. Superior reliability. Heavy duty design. Specifications: Spindle: Number: 1 Maximum Speed: 0.001 to 300 deg/sec Maximum Torque: 30 ft-lb Nose Thread: 2-3/16- 10 tpi Runout Max: 0.0004" Backlash: 45 arc-sec Center Height: 4.000 +/ 0.001" Gear Ratio: 72:1 Standard 5C Collet Size Range: 1/64 to 1-1/16" Indexing: Maximum Rotation/Step: 999.999 deg Resolution: 0.0025 deg Accuracy: +/ 15 arc-sec Repeatability: 10 arc-sec Worm Gear Diameter: 2.8" General: Operating Temp(Max Ambient) 100 deg F Duty Cycle(w/o tailstock) 75% full speed Electrical: 120 Volt. 3 Amp, 60 Hz, Single Phase ... moreOverall Dimensions: 12" x 8-1/2" x 9" tall Comes as shown in pictures.
|
|
|
emco compact 5 dividing indexing head
nice nearly unused dividing head for emco compact 5 lathe
|
|
|
phase II 5c indexing head.
import.gets the job done. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144be5b85f3-0x104-
|
|
|
MACHINIST MILL LATHE TOOL Dividing Head Index Indexing Tail Stock p
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. BT
|
|
|
Dividing INDEXING HEAD Adjustable Workpiece Support 5-1/2" to 7-1/2" Range
NICE LATHE INDEXING HEAD Adjustable Workpiece Support 5-1/2" to 7-1/2" Range. The height adjusment is measured from the base to the bottom of the V notch. The support is designed to go between the indexing head and the tail stock to support the work piece. This accessoriy is in great shape it is used and has scratches and scuffs and paint chips assoicated to use please refer to photographs for additional detail on condition. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and ... morequestions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession
|
|
|
INDEX PLATE dividing head indexer spacer milling mill indexing 49 47 43 41 39 37
good used Index Plate mfg not marked 1 3/4" hole x 7" dia x 49. 47, 43, 41, 39 and 37 holes please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
INDEX PLATE dividing head indexer spacer milling machine mill indexing 50 holes
good used Index Plate Hendey No. 50 1 3/4" hole x 7" dia x 50 holes please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Tail Stock Adjustable MACHINIST MILL LATHE TOOL Dividing Head Index Indexing
Yausa Tail Stock. Adjustable Center. MACHINIST MILL LATHE TOOL Dividing Head Index Indexing 553-301.
|
|
|
YUASA 550-003 INDEXING HEAD SPIN JIG, For 5C Collets, NO RESERVE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! YUASA 550-003 INDEXING HEAD SPIN JIG. For 5C Collets, NO RESERVE! This is a NO RESERVE auction for a used Yuasa#550-003 indexing head/spin jig. Used as I understand it with 5C collets. As best as I can tell it is in good condition. And needs only a light cleaning. Get a deal on an expensive fixture! Condition: Used See listing. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Usps Priority Mail Medium Flat Rate Box $12.35 I will ship to: United States Customer Service Policy: Will combine if possible. a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144f758be21-0x111-
|
|
|
A. A. Gage Co. Ultradex 12" Rotary Table / Indexing Head
A. A. Gage Ultradex 12" Rotary Table. Can be used both vertically and horizontally. 1 degree graduations with 360 positions. Local pick up recommended as item is very heavy. Buyer responsible for shipping. BEST OFFER
|
|
|
Carroll 6" Dividing Indexing Head Indexer Ellis Lathe id8318/11-5
Good used condition Check pictures for condition Item# 8318 location: 11-5
|
|
|
Used Bridgeport Tailstocl and Riser for use with Indexing Head or Angle Plate
Selling as used not sure if they were ever used they were in a box on the shelf in our Maintenance Dept. when we closed this portion of our business. The height of the center measures 8" from the bottom the riser is 1 3/4" tall and both are keyed on the bottom. Good luck Bidding
|
|
|
UNIMAT DB SL Indexing Dividing Attachment Head #1260 New Old Stock
For sale Unimat DB SL Indexing Dividing attachment 1260 This attachment is new-old stock in excellent condition. With original box. Index plate is 48 tooth. Item comes complete. As seen in the picture, with screws and wrench.
|
|
|
MACHINIST BROWN & SHARPE INDEXING DIVIDING HEAD w TAIL STOCK & 7" CUSHMAN CHUCK
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS MACHINIST TOOL BROWN& SHARPE INDEXING DIVIDING HEAD COMES WITH TAIL STOCK& 7" CUSHMAN CHUCK ZOOM INTO PICTURES TO SEE CONDITION OF THESE PIECES THIS PICES CAN BE SHIPPED FED EX GROUND WEIGHS ABOUT 150 POUNDS. PLEASE CONTACT ME DIRECTLY FOR SPECIFIC SHIPPING COSTS! PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS PIECE CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY ... moreOTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
|
|
|
DIVIDING HEAD INDEXING PLATE 7-1/2"
Dividing Head Indexing Plate 7-1/2" OD 1-3/4" ID.30 Thick 37. 39, 41, 43, 47, 49 Condition: Good Questions? call Metro Machine& Tool 732-650-0666
|
|
|
TROYKE ROTARY TABLE INDEXING PLATE DIVIDING HEAD DOUBLE SIDED
Double sided indexing plate believed to fit a Troyke rotary table. 22. 23, 24, 25, 26, 27, 28, 39, 41, 43, 44, 46, 47, 49 hole patterns. 500 thick, 1.500 center hole, 4#10 SHCS holes on a 1.875 bolt circle. Ships USPS priority mail. Please ask any questions before bidding. Please see my feedback and bid with confidence. Be sure to check out my other auctions. Thank you.
|
|
|
Universal Indexing Dividing Head w/Tailstock, Inv 19863
Universal Indexing Dividing Head w/Tailstock No Additional Plates What you see is what you get 2 pieces Tailstock and head two pieces weigh 89 lbs. unboxed(Inv. 19863) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $50; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code ... morehere is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Emco Unimat Indexing & Dividing Head 48 Tooth Boxed
Emco Unimat Dividing and Indexing Head Part No 1260. With 48 tooth dividing plate fitted. Little sign that this has ever been used. Slight shelf rust on the housing, and a small chip to the enamel. Original box. Please see my other auctions for more Unimat items. I will ship worldwide. Please request postage costs for overseas. Please be aware that Royal Mail Overseas compensation is now limited to £20.00. Items selling in excess of this will only be sent by International Signed For or Airsure. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Payment Details: All payments are to be made in GBP Sterling unless by prior arrangement. ... morePayments accepted by cheque. Postal Order, International Money Order, or by Paypal. Postage and packing at cost. Important! Please read. Email contacts and the winning bidder please note that spam filters make contact very difficult. Please add my email address to your Address Book and/or Safe List. I always reply to emails received. If you don't hear from me within 24 hours. Please get contact details from Ebay and use the phone. Powered by
|
|
|
Yuasa 6" 3 jaw Indexing Head for mill
This 6 inch 3 jaw Indexing chuck has only been used 4 or 5 times. There are no nicks or any flaws on mounting surfaces. The rotating part of it is tight and locks within a 1/4 of a degree at the worst. A awsome asset to any machine shop.
|
|
|
Machinist indexing fixture head 5C collets index includes Hardinge 1/2 collet
Indexing head indexing head for use with 5C collets. Not sure what brand as tag is no longer present This is an older tool with some surface rust. But everything works fine 9" long- 5-1/2" Tall Ring is 5" in diameter Base is 3-3/4" X 4-1/2" Tool has PJH stamped into the top Hardinge 1/2" 5C collet shown is included. You work hard. Treat yourself! Please see my other items Sales tax for California bidders only Questions welcome Thank you for viewing this auction- SHIPS FREE IN USA ONLY
|
|
|
Bridgeport indexing head plate set. #1.2.3.4
Used Bridgeport indexing head plate set. Comes with 1 each of the following#1.2.3.4 plates have more then one lot for sale sold as each set of four. All of them are in good condition. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. ... morebuyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
|
|
|
MACHINIST LATHE INDEXING HEAD 5C COLLETS MIX LOT HARDINGE NIEL-SKOKIE 19 PCS
HERE ITS A NICE MIX LOT OF 5-C COLLETS FROM HARDINGE. NIEL-SKOKIE, SOUTHBEND AND OTHER GOOD BRANDS TOTAL OF 19PCS 6 PCS HARDINGE 11/32. 3/8, 7/16, 1/2, 15/32, 23/32, 3 PCS HARDINGE SOFT COLLETS OR ALSO KNOWN AS EMERGENCY COLLETS CAM BE MACHINE TO SPECIFIC SIZE YOU NEED 3 PCS NIEL-SKOKIE 5/8. 3/4, 5/16 1 PC SOUTHBEND 1/4 1 PC RIVETT 3/8 1 PC CWC 1/2 SQUARE 1 PC POST BROS 1.00 2 PC NEWS 7/8. 15/16 MADE IN JAPAN 1 PC NEAL-SKOKIE SOFT COLLET OR ALSO KNOWN AS POT CHUCK LIKE NEW 4 ICNH DIAMETER 1-1/8 THICK IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT ME I WILL RESPOND AS SOON AS I CAN I WILL COMBINE SHIPING TO SAVE YOU MONEY IN SHIPPING PLEASE DONT FORGET TO LOOK AT MY OTHER ITEMS THANK YOU FOR LOOOKING
|
|
|
NICE!! HAAS Indexing Head 5C Indexer w/Control complete. see video
NICE! HAAS Indexing Head 5C Indexer w/Control complete Up for bidding a NICE! HAAS Indexing Head 5C Indexer w/Control complete note. the step chuck and collet don't go. only for picture Please see all pictures and videos. https:www.youtube.com/watch?v=RD0AQw4dito&feature=youtu.be. Se habla español. https:www.youtube.com/watch?v=mN1OTjG0Sa8&feature=youtu.be. Nice and clean Local Pick Up Okay $$ a Bargain is only a Bargain if you take Advantage of it. $$ any other info. Just ask. Will ship to any country. ALL SHIPPING ARRANGEMENTS. COSTS, AND BILL OF LADINGS ARE THE RESPONSIBILITY OF THE BUYER! There will be a $40.00 Packaging& Handling fee for shipping. local pick up. no charge Comes as show in Picture Another Goodie and ready to go a new set of this type sells for several Hundreds over $XXXX.00 buy smart- save money"Made ... morein USA" In excellent working condition NOTE: If this chuck is not what you're looking for. just tell me what You need. and and if I have. is yours Bid with confidence- Check My feedback Any question 626 536 6202“Mike” Se Habla Español Take a good look at the picture. Thanks for being happy buyer“MAY GOD KEEP ON BLESSING AMERICA” On Apr-18-14 at 15:28:10 PDT. Seller added the following information: I forgot. this is a 17 pin connect cable. to connect control to indexer
|
|
|
Hardinge PA-17 Dividing Head Indexing Plate
Description Hardinge PA-17 Dividing Head Indexing Plate Payment Payment must be made within 3 days of purchase. Shipping Shipping will be by FEDEX Ground. USPS Priority, or Freight Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed ... moreto 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Hardinge 5C Divinding Head with Indexing Plates Tailstock & Accessories
Description Hardinge 5C Divinding Head with Indexing Plates Tailstock& Accessories Includes Everything Shown Indexing plates: PA-17. PA-20, PA-27, PA-37, PA-43, PA-48, PA-75 Payment Payment must be made within 3 days of purchase. Shipping Shipping will be by FEDEX Ground. USPS Priority, or Freight Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking ... moreequipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Indexing Head Yuasa 5C Collets - Great Condition - Made in Japan, High Qlty
This was purchased many years ago for our home shop. Used less than 2 months for a job. It's in great condition. Takes 5C Collets. Email with questions. Yuasa International Brand" The Pillar of Quality" Carlstadt. NJ Made in Japan- High Quality! Stock No. 550-004 77512 number on side of tool Posted with
|
|
|
Vintage Millitest Rotary Indexing Head US PAT 3075411 5195-84 3
Vintage Millitest Rotary Indexing Head US PAT 3075411 5195-84-Serial No. J9911 Information about this machine: http:www.datamp.org/patents/displayPatent.php?pn=3075411&id=50918 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out ... moreof your brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay and it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Please note our eBay department is closed on Saturdays and Sundays.
|
|
|
Machinist Milling Dividing Indexer Indexing Head w. Rubber Flex Collets
This is MASSIVE. It will provide excellent rigidity and accuracy. It is beautifully constructed. And its operation is superb. It weighs about 31 pounds. It can be mounted vertically, horizontally or held in a vise. The Jacobs Rubber-Flex collets range in size from.300" to 1-1/16" Off sized workpieces are easily accommodated by the collets. I will be happy to add pictures. Thank you for looking.
|
|
|
5C Collet Indexing Head fixture, grinding, drilling, milling
A used 5C collet indexing head in very nice condition. Brand unknown as the tag/label is missing. Works smoothly. Former owners name scribed under the handle on the back of the base. No rust or corrosion. Approximately 9 inches long overall. Round indexing plate is 5 inches across. Base measures 4 inches by 4 1/2 inches. Rugged construction.it weighs 12 pounds. FREE SHIPPING with"Buy it Now" only. Otherwise shipping is $11.95.
|
|
|
5 PRECISION DIVIDING HEAD INDEXING PLATES
These are 5 Dividing Head Indexing Plates in good condition. Specifications: Inside Diameters: 1-1/8" Thicknesses: 5/16" Overall Diameters: 5" G6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146a7af96ea-0x10f-
|
|
|
ELLIS INDEXING DIVIDER HEAD 6 ROW WITH 6 IN CHUCK
Ellis Indexing Divider Head Machinist Tool. 6 in chuck and single plate has 6 rows. Tail Stock. GOOD WORKING CONDITION di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-146adef255c-0x104-
|
|
|
CARROLL 10 IN DIVIDING INDEXING HEAD WITH HARDINGE SPEED CHUCK
Carroll 10" dividing indexing head indexer with Hardinge#5CA speed chuck and tail stock GOOD WORKING CONDITION
|
|
|
Haas 7 Pin Automatic Digital Indexing Head indexer 5C 120V 3Amp 5C Index
Haas Automatic Digital Indexing Head Model 5C 7 Pin 120V 3Amp 60Hertz 1 Phase Used in good working Clean condition as shown Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive I go to the post office at everyday at 1.00pm Monday- Friday if an item is bought and payed for before then item will be send it the same day if any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service and Great deals Thank You For Viewing
|
|
|
2 PRECISION DIVIDING HEAD INDEXING PLATES
These are 2 Dividing Head Indexing Plates in good condition. Specifications: Inside Diameters: 13/16" Thicknesses: 17/64" Distance Between Hole Centers: 1-1/16" Overall Diameters: 4"
|
|
|
indexing head plate for jeweler's lathe
Hello! Welcome to my auctions. This auction is for the part of the indexing head plate in the pictures. This piece is 8 1/4" in diameter. The only markings on this are numbers: 52.54,56,58,62,64,66,70,74,76,78,8084,88,94,98, 144,240, and 365. Please check my other items ending and I will gladly combine shipping(please request an invoice so I can determine the combined shipping) NJ residents need to add 7% sales tax or submit an ST3 matching purchaser's info. I am not'charging' sales tax but I am required to collect it for the state of New Jersey. It is the law. Buyer must be registered with ebay and paypal or I will not ship. Please note. I do not use a smart phone so I have to'boot up a computer' In other words, if I don't answer you immediately, its because I have not seen your question. Thank you!
|
|
|
AMES PRECISION INDEXING STAND W/ STARRETT NO. 263 MICROMETER HEAD
Ames Precision Indexing Stand w/ Starrett Micrometer Head Model 60-5032 Indexing Stop Every.05" Precision Clamp Base Measures 7" x 3" x 1" H Includes Starrett No. 263 Precision Micrometer Head No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
UNIMAT WATCHMAKERS MINI LATHE SL1000 OR DB200 HEAVY INDEXING AND DIVIDING HEAD.
Up for bid is a Unimat SL 1000 or DB 200 old school heavy indexing and dividing head with# 48 division. Very nice. Free shipping to the lower 48 states.
|
|
|
Renishaw MH8 Manual Indexing Head
The MH8 is a manual indexing probe head with an M8 thread probe connection designed for use on small manual CMMs. The MH8 can carry any of Renishaw's M8 probes and the reach can be extended by fitting a 50 mm probe extension bar. Specification Weight, 205 g, Probe mounting, M8 thread, Head mounting, MS range of shanks, Suitable interface, Probe status indication, 1 LED, Cable connection, 5 pin DIN 180º socket, A-axis indexing, 0° to 90° in 15° repeatable steps = 7 positions, B-axis indexing, ±180° in 15° repeatable steps = 24 positions, Repeatability of position(2s) 1.5 µm(0.00006 in) TP2 and 10 mm(0.39 in) stylus fitted, Maximum extension bar, 50 mm(1.97 in) PEL1 only, Contact us online if you require or you have a. Or alternatively you may like to speak directly to your.
|
|
|
Van Norman indexing dividing head with tail stock and 2 plates C closer collet
repainted Van Norman 6-1460 indexing dividing head with matching tail stock with a extra plate that is shown in the picture. Has"C" collet closer. Spindle is threaded. It is in working order and in decent shape. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up ... morewill be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
Indexing Head for Unimat SL/DB Lathe. 48 Tooth dividing Plate. Boxed. Excellent!
Up for bid is an OEM indexing head with 48 tooth dividing plate for the Unimat SL/DB lathe. It is in excellent condition and fully functional. There are a few minor scratches and paint chips. But no significant rust or corrosion. Thank you for looking! IMPORTANT NOTICE I do not accept international bidding. Please do not ask. Shipping to US. Lower 48 ONLY, at a flat rate of $5.60. Payment by Paypal ONLY.
|
|
|
CINCINNATI MILACRON DIAL TYPE MILLING MACHINE INDEXING HEAD & CENTER
CINCINNATI MILACRON DIAL TYPE MILLING MACHINE INDEXING HEAD& CENTER Description YOU ARE BIDDING ON THIS GOOD USED CINCINNATI INDEXER& CENTER OFF A CINCINNATI MILACRON DIAL TYPE MILLING MACHINE. IT HAS JUST BEEN SETTING IN THE SHOP FOR YEARS ON THE SHELF. IT IS IN GREAT WORKING SHAPE. YOU GET ALL THE PARTS YOU SEE. SEE PICTURES FOR DETAIL. NO OVERSEAS SHIPPING UNLESS YOU ARRANGE SHIPPING FOR THEM TO COME& PICK IT UP CANADA BUYERS TO ARRANGE THEIR ON SHIPPING. SHIPPING IS FREE ON THE EAST COST THE WEST COAST SHIPPING IS 150.00 THIS WILL SHIP YELLOW FREIGHT TERMIAIAL TO TERMINIAL WERE YOU PICK IT UP. YOU CAN GO TO YRC.COM TO FIND YOUR NEAREST TERMINIAL. Payment Paypal or Pay at pickup other pay options contact me. Payment must be made withen 3 days of auctions end.Thankyou Shipping I ship Prioirty mail on glass& pottery parcel ... morepost on everything else.insurance is INCLUDED IN THE SHIPPING ON ALL POTTERY& GLASS& FRAGIL ITEMS. International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Other information a seller may wish to include: These charges are normally collected by the delivering freight(shipping) company or when you pick the item up? do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Shipping fees are the responsibility of the buyer I DO COMBINE SHIPPING ON MULPITAL ITEMS shipping is based on location and item weight when boxed.All pottery& glass items are shipped priority mail I use parcel post& ups on the rest.UPS IS USED ONLY WHEN IT IS TO BIG FOR USPS I SHIP FREIGHT THRU YELLOW TRUCKING TERMINIAL TO TERMINIAL.I RESERVE THE RIGHT TO CHANGE SHIPPING PROVIDERS ALL international sales are for the
|
|
|
Flynn 80 Indexable Indexing Boring Head 2" Shank. Mill Tool Holder
Call Brett At 309-261-5695 for questions or email Brett Flynn 80 Indexable Indexing Boring Head 2" Shank. 3/4" boring bar hole, Mill Tool Holder Limited knowledge of tooling so if needing more measurements be specific of what and how to make accurate reply. Came out of small private state shop. View all photos and ask questions before purchase. Brett Check out my! Payment due within 7 days of auctions end.
|
|
|
Hardinge Cataract 3C Indexing Head
Normal 0 false false false MicrosoftInternetExplorer4 Hardinge Cataract 3C Indexing Head. With its tapered key. It fits the table of both the Hardinge Vertical and Horizontal Cataract Milling Machines, as well as the Lathe beds. 2-1/8” center height. Includes 72 tooth index plate and 1/8” 3C collet.
|
|
|
L-W Chuck Co.Dividing indexing Head,Tailstock,Lathe chuck INV=14958
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a L-W Chuck Co.Dividing indexing Head. Tailstock, Lathe chuck Dividing head pivots vertically from down 20 degrees to up 80 degrees. Dividing head base is 10" F- B) X 8" L- R) Tailstock base is 7" F- B) X 6" L- R) Cushman Lathe chuck: 3-jew, 9" dia. Shaft are not included. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping ... morewith your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first
|
|
|
Excellent Aciera F1 Milling Machine Indexing Head Gear Cutting Attachment K248
This sale is for ONE Excellent Aciera Swiss made ACERIA F1 Watchmakers Indexing head gear cutting Attachmement included are 3 plates one installed. Item No. K248. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges ... morewill be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or compo
|
|
|
YUASA 550-031 INDEXING HEAD
UNIT IN EXCELLENT CONDITION NOT USED IN A JOB SHOP PICKUP ONLY BUT WILL WORK WITH BUYER TO CRATE AND GET READY FOR SHIPPER PICKUP CONTACT 860-836-6852 FOR INFO:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146eb725bef-0x111-
|
|
|
FIBROTACT ROTARY TABLE 12" DIAMETER INDEXING HEAD TYPE: P10-320-FN by FIBRO
FIBROTACT ROTARY TABLE 12" DIAMETER INDEXING HEAD TYPE: P10-320-FN by FIBRO Made in Germany Serial 11 1131104 It came off working piece of machinery. But I do not know much more than that. Please view photos and ask questions before bidding. This is for local pick up only or buyer can arrange shipping. Thank you! Posted with
|
|
|
INDUSTRIAL INDEXING HEAD ROTARY TABLE MODEL 1092-6155-4 (No mfg. mark)
INDUSTRIAL INDEXING HEAD ROTARY TABLE MODEL 1092-6155-4(No mfg. mark) It came off working piece of machinery. But I do not know much more than that. Please view photos and ask questions before bidding. This is for local pick up only or buyer can arrange shipping. Thank you! Posted with
|
|
|
Haas # HA5C Indexer Indexing Head Operators Manual # 96-4039 (June 1995)
Operators Manual For Models: HA5C Description: This is a Users manual for Haas Model HA5C Indexing Head. It covers: Introduction. Setting up the Indexing Head and Control, Operation, Programming the Controller, Troubleshooting, Maintetenance, and Tail-stock Operation, Maintenance& Procedures. The manual has 61 pages. Includes Sections on: Introduction to the Haas# HA5C Setting up the Indexing Head& Control Operation Programming the Controller Programming Examples Programmable Parameters Troubleshooting Routine Maintenance# HA5C Assembly Drawing Tail-stock Setup. Maintenance, Operation Publication Date: June 1995 Publication No. 96-4039
|
|
|
Haas # HA5C Indexer Indexing Head Operators Manual # 96-4039 (June 1997)
For Models: HA5C Description: This is a Users manual for Haas Model HA5C Indexing Head. It covers: Introduction. Setting up the Indexing Head and Control, Operation, Programming the Controller, Troubleshooting, Maintenance, and Tail-stock Operation, Maintenance& Procedures. The manual has 61 pages. Includes Sections on: Introduction to the Haas# HA5C Setting up the Indexing Head& Control Operation Programming the Controller Programming Examples Programmable Parameters Troubleshooting Routine Maintenance# HA5C Assembly Drawing Tail-stock Setup. Maintenance, Operation Publication Date: June 1997 Publication No. 96-4039
|
|
|
5" Ultradex AA Gage Rotary Table with Indexing Head with Polygon Mirror
Ultradex Model A by AA Gage 5" Indexing Table with double side polygon mirror This Extremely High Precision Table has 1° Increment Indexing(360 Positions) The 5" Ultradex Rotary Table. Model A is an ideal Optical inspection tool. Utilizing interlocking teeth(a Hirth Double Coupling-very similar to the teeth on a crown gear) the table is setup to go in 1 degree increments. The strength of the Ultradex table lies in its accuracy for inspection- verifying prism angles, optical cubes, optical polygons, etc. The table has a lever which raises the top table, freeing it from the bottom gear, and allowing rotation. The 5" table is the lightest and most portable of the Ultradex tables, and can be set up even for field applications. This comes with a heavy-duty wood case for protection and storage. Please email with questions.
|
|
|
MACHINIST QUICK DIVIDING INDEXING HEAD 5 INCH CHUCK CNC MILLING LATHE
QUICK DIVIDING INDEXING HEAD WITH 5 INCH 3 JAW CHUCK NO INDEXING PLATE. THINK ITS MADE IN CHINA BUT ITS MADE WELL NO CHUCK KEY PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN ... moreLISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
PRECISION INDEXING DIVIDING HEAD for 5C Collets
PRECISION INDEXING DIVIDING HEAD. VINTAGE. RUST FREE,USED IN VERY GOOD CONDITION. PRECISION INDEXING DIVIDING HEAD USES 5C COLLET.TUBE THREAD IN VERY GOOD LIKE NEW CONDITION. SPIN/ INDEX WITHOUT PLAY.VERY SMOOTH AND NO PLAY AT ALL(MAY NEED SAME OIL) SIDES ARE BING GROUND PARALLEL TO CENTER OF ROTATION.ALONG SHAFT. See pics. Of actual item. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14741dd5457-0x10a-
|
|
|
L-W Indexing Indexer Fixture Dividing Head W 5" 3 Jaw Chuck & Tail Stock
Description | Payments | Shipping | Feedback | Disclaimer | Links | Bidding You're Bidding On Manufacturer: L-W Model Number: Description: L-W Indexing Indexer Fixture Dividing Head. Chuck, Tail Stock No. 3 Morse Taper With 1-1/2"8 Threaded Spindle. Comes With No. 3 MT Dead Center 5" L-W 3 Jaw Universal Chuck With Key and 1/4" Hex Key. Everything Shown. Nothing more. Has 5/8" Wide Keys on the Bottom of Head& Tail Stock. Item Condition: Very Good Working Order Size: Additional Information We Combine Shipping On Multiple Items To Save You Money. If you're buying multiple items please wait for an invoice before paying. The shipping calculator doesn't work well on combining shipping. We Combine Shipping On Multiple Item Purchases To Save You Money PAYMENT METHODS ACCEPTED Visa. MasterCard, Discover, American ... moreExpress And eChecks Via PayPal. Ohio Residents Must Pay 7% Sales Tax Payment must be received within three days. Back To Description SHIPPING INFORMATION After winning an auction. Please use the"PAY NOW" button, this will take you to the Checkout page where you can complete the transaction. If you won multiple items. Please wait for us to send an invoice with the Combined Total. Plus Shipping. However there may be cases when the items can't be combined due to excessive weight or heavy& fragile items together. If so. I'll notify you by email. As a rule. Items are normally shipped the next business day after payment is cleared. You will receive an email notice with a tracking number when your item has shipped. Note! All shipments are with Delivery Confirmation or Tracking Number. Back To Description FEEDBACK It is our policy to always leave an automatic positive feedback once your payment is received and cleared. Please do the same for us once you receive your item. If there is a problem with your item. Please contact us immediately. We always do our best to resolve any problems. A Note About DSR's. Or Detailed Seller Ratings Item as
|
|
|
MM-Tooling rotary indexing head
MM tool rotary with a 10 1/2 face blade We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172
|
|
|
HARDINGE DIVIDING HEAD WITH 3 JAW CHUCK INDEXING
Hardinge dividing head as pictured operates as it should
|
|
|
HAAS 4TH-AXIS 5C AUTOMATIC DIGITAL INDEXING HEAD --- GREAT SHAPE
HAAS 4TH-AXIS 5C AUTOMATIC DIGITAL INDEXING HEAD HAAS 4TH-AXIS 5C AUTOMATIC DIGITAL INDEXING HEAD 7 PIN CAME FROM A WORKING SHOP. THERE ARE NO ISSUES IN GOOD WORKING CONDITION. PLEASE EMAIL OR CALL WITH ANY QUESTIONS 718-698-8400. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 ... moreWE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
WATCHMAKERS MILL INDEXING DIVIDING HEAD ACIERA SCHAUBLIN BOLEY PRATT WHITNEY
WATCHMAKERS MILL INDEXING DIVIDING HEAD ACIERA SCHAUBLIN BOLEY PRATT WHITNEY Brand Custom Scientific Instruments Packaging None Condition Excellent Quantity 1 Complete with drawbar(10mm) Burnard 2 1/4" scroll chuck. Base is 3 1/2" x 2 7/8" Center height is 2" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Model: RT-5C SMW CNC Indexing Head
Preowned SMW CNC Indexer. Model: RT-5C, New Approximately 1996) Brake torque Collets Thru hole diameter Spindle height Swing clearance Load capacity 100 ft-lb. standard 5C 1.06" 4.3" 8.6" 65 Lbs. Equipped With Pneumatically actuated collet closer(accepts type 5C collets) SMW Accu-Smart 55 servo controller(S/N: 35020710) with RS-232 port Fourteen pin connector 1/60/110 Volt electrical input Approximate Weight: 100 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1478eb6d832-0x110-
|
|
|
Brown & Sharpe Precision Dividing Indexing Head & Chuck Stock Assembly
For sale by Equipment Recycle is a used Brown& Sharpe Precision Dividing Indexing Head& Chuck Stock Assembly. Here is your chance to own this for a fraction of retail. There are m ore details on this item below. Feel free to contact us with any questions. This item is for local pick up only. Specs: Overall Measurements& Weight: Height: 8-1/2" Width: 14" Depth: 12-1/2" Base: 8" x 5" Weight: 100lbs. Approx. Chuck Outside Diameter: 7" Chuck Inside Diameter: 2" Disk Diameter: 5" Manufacture: Brown& Sharpe Model# unknown Equipment Recycle Rating: 4 Equipment Recycle Rating System 5 = New 4 = Like New 3 = Good to Fair 2 = Has issue(read description) 1 = As-Is Powered by SixBit's eCommerce Solution
|
|
|
4" OD Dividing Head Index Plate 21 to 33 Used and 37 to 49 lathe table indexing
4" OD Dividing Head Index Plate 21 to 33 Used and 37 to 49 lathe table indexing Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Two indexing plates used and in good condition. About 3 15/16" OD 13/16" center hole and about 1/4 thick. First is marked with"B" and has 21.23,27,29,31 and 33 and the second marked"C" and has 37,39,41,43,47 and 49. SHIPPING We try to same day or the day after upon receipt of payment. 1)All items will be shipped with UPS ground unless otherwise indicated in item description. California sales tax applies to all California residents and must be included with payment Payments Payment I accept the following forms of payment: ... morePayPal Shipping& Handling US Shipping. $7.00 USPS Priority Mail® International Shipping. Click button to see prices: USPS Priority Mail International USPS Priority Mail International FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Haas Control Box 7 Pin Automatic Digital Indexing Head indexer 5C Rotary Table
Haas Control Box 7 Pin Automatic Digital Indexing Head indexer 5C 125 Volts AC 3 Amps 60 Hertz 1 Phase 7 Pin Indexer Real Clean! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147ac59fca0-0x114-
|
|
|
Yuasa 550-031 Dividing Head Indexing 10" Semi-Universal With 6.5" Diameter Chuck
Yuasa 550-031 Dividing Head Indexing 10" Semi-Universal With 6.5" Diameter Chuck Used Yuasa dividing head model number 550-031. This is the 10" semi-universal model. Includes the pictured 6.5" diameter Yuasa three jaw chuck and misc items pictured. Comes exactly as pictured. Local pickup only please. Be advised. This unit weighs approximately 80 lbs. If you desperately want this shipped. I will drop off at my local UPS store as-is and you can deal with them directly for packaging and shipping services. The phone number to my local UPS store is(856)464-2100 if you want to get an estimate before bidding. Packaging and shipping costs are the buyer's responsibility. Are NOT included in the bid amount and are to be paid directly to UPS. This item must be picked up and paid in full within 7 calendar days of auction end. ... moreI do not offer a shipping option for this auction. Buyer is fully responsible for local pick up or arrangement of shipping. BE SURE TO READ THE ENTIRE DESCRIPTION AND AUCTION TERMS BEFORE YOU BID. Please be sure all of your questions are answered before you bid! Check my feedback and bid with confidence! THANK YOU AND GOOD LUCK! Please contact me for any questions you may have. I make every reasonable effort to ensure my buyers are satisfied! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-147c361df41-0x10b-
|
|
|
Hardinge H-4 5C Indexing Head and Tailstock
There is a slight crack on the handle of the indexing head as I had said in the picture. It does not get in the way of anything and can easily be fixed.
|
|
|
Hardinge dividing head 5 plates 5c 3 Jaw drawbar tailstock super nice Indexing
Universal Plain Dividing Head– TN– Hardinge Threaded Nose Spindle 2 3/16-10 Includes Dividing head 6 Dividing plates Draw bar Cushman 3 jaw chuck with Threaded back Tail stock Manual This unique dividing head has a quick 4:1 ratio for rapid indexing. The spindle is a precision ground pre-loaded ball bearing spindle with a 5C collet seat and either a Hardinge taper or threaded spindle nose. The head can swing from 10° below horizontal to 20° beyond vertical. The two– piece draw spindle allows the draw bar to be removed without loosening the collet. Allowing work to be easily accomplished in the vertical position. Seven index plates come with the unit. An adjustable stop plate is provided which can be locked in any position, speeding up work when doing repetitive angular milling. The dividing head also comes with a center/ driver, ... moretailstock, spanner wrench for the draw spindle, and the index table chart. The Dividing Head or Spiral Milling Heads are used extensively in milling spiral and helical gears. Constant velocity drum cams, etc. The manner of transmitting motion to the spindle in the head is the same for both types, but the construction of the main castings are entirely different. The Dividing Head is designed so that its spindle can be swiveled vertically, while the spindle of the Spiral Milling Head is rigidly fixed in a one– piece housing to provide an attachment suitable for heavy and continuous helical milling. The Spindle of the Dividing Head is housed in a swivel block, which can swing from 10° below horizontal to 20° beyond vertical. The two– piece draw spindle allows the draw bar to be removed without loosening the collet, allowing work to be done in the vertical position. Please feel free to call me with any questions at: Phone: 505-880-1540 Thanks John Purchasing Information: The machine is located in Albuquerque NM There is no charge to load onto buyer’s truck Cleared funds are required prior to shipment Payment methods include VISA/Master Card. Wire transfer, certified check
|
|
|
Hardinge Style 5C Snap Indexing Head with Collar
Hardinge Style 5C Snap Indexing Head with Collar. Used but in good condition.
|
|
|
18" Cincinnati Horizontal Mill Indexing Attachment (Dividing Head)
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2570(1) Used 18"Swing Cincinnati Horizontal Mill Indexing Attachment(Dividing Head) Specifications: Swivel of head.90 Tail stock horizontal travel.3" nominal Swing over bed.18"+ nominal Equipped With: 15" Cushman 4-jaw chuck 4-9" Index plates Overall Dimensions.24" L-R x 28" F-B x 21" H Weight.400 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our ... moreextensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws, bandsaws, shapers, planers, shears, threaders, vibratory finishers, welders, welding prepositioners, as well as forklifts, cranes, and material handling equipment. We also specialize in all types of
|
|
|
# 12 INDEXING HEAD fFOR A MILING MACHINE VCG
Very nice used indexing head for a mailing machine. I believe its a Cincinnati. but I am not positive. Is a 12" 90 degree rotating dividing head. Everything moves freely.all the numbers are still clearly visible. Does not look like it had a lot of use. Great unit with a lot of potential. Can pick it up or will ship at your expense. its very heavy. If you have any questions please feel free to ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147eb60f02f-0x10a-
|
|
|
carroll 10" dividing head indexing head and tail stock
used Carroll 10" dividing indexing head fits Bridgeport milling machine. Lot includes indexing head matching tail stock and two extra dividing plates and the 4 jaw that is shown. on indexing head. all in working order and selling as is. This pieces can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines ... morethat are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold.
|
|
|
JET INDEXER INDEX INDEXING DIVIDING HEAD FOR MILLING MILL LATHE MACHINE
JET INDEXER INDEX INDEXING DIVIDING HEAD FOR MILLING MILL LATHE MACHINE MODEL# UNKNOWN PLEASE CLICK BLUE ARROW ON RIGHT OF PICTURES TO SEE ADDITIONAL PICTURES WITH TAPE MEASURE Condition: NEW. In box NEW. No box NEW. Old inventory USED. But in good working condition. X USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: 704-747-5956 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise ... morediscussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 704-747-5956 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or busi
|
|
|
Hardinge 5C Model HV-4 Snap Indexing Head with Collar
Hardinge Style 5C Model HV-4 Snap Indexing Head with Collar. Used but in good condition.
|
|
|
Hofmann Universal Precision Dividing & Indexing Head
Hofmann Universal Precision Dividing& Indexing Head Hofmann Universal Precision Dividing& Indexing Head Ref.53A-193 Model No. UTH-200 Serial No. 86151 New 1986. Center Height in Horizontal Position: 8" Total Height of Center in Vertical Position: 16.5" Hole Thru Spindle: 2.16" Spindle Center Taper: 6 MT Overall Dimensions of Head: 21" x 20" x 12.6" High Weight. Including Tailstock: 360 Lbs. Equipped With: Indirect Dividing Plate Direct Indexing Plate Power Take-Off Tailstock Centers All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing Contact We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at(860) 828.3541. Payment At this time we accept Paypal. Contact us for payment methods to pay on pickup. If you purchase multiple items from us. ... moreOr purchase a freight item, please wait to receive an updated invoice from us before making payment. Shipping Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. Return Policy We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
ELLIS INDEXING DIVIDER DIVIDING HEAD 6 ROW 20 HOLE BUCK CHUCK MACHINIST TOOL
ELLIS INDEXING DIVIDER DIVIDING HEAD 6 ROW 20 HOLE BUCK CHUCK MACHINIST TOOL PLEASE READ THE COMPLETE DESCRIPTION AND LOOK AT THE PICTURES CAREFULLY BEFORE BIDDING WHAT YOU SEE IS EXACTLY WHAT YOU GET PLEASE INQUIRE IF YOU HAVE ANY QUESTIONS. 818 400-5233 Sales Policy Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller sole discretion. Payment Method We accept Paypal Shipping& Handling Shipping cost to lower 48 STATES in the U.S.A is $ 25.00 Hawaii. Canada Puerto Rico and International shipping will require more $$$ Hawaii. Canada and Puerto Rico Customers Please DO NOT make a payment until ... moreuntil we figure out the exact shipping costs to your location. After we figure out the exact shipping costs. We will email you a revised Paypal invoice. International Customers Please DO NOT make a payment until we figure out the exact shipping cost to you location. After we figure out the exact shipping costs. We will email you a revised Paypal invoice. International Customers All duties. Taxes, and import fees are the responsibility of the buyer. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14829dcef9c-0xf8-
|
|
|
jewelers, model making dividing/indexing head, used with Myford ML7 lathe
Miniature precision index/dividing head model making or jewellery. Comes with 4 dividing wheels and 3 blank wheels to create your own. Shaft is tappered to accept a small chuck( size unknown but is about the size of a jacobs taper) one end and straight to take a face plate. Turns ratio 60;1. plate holes 32.34,38,45,49,77,91-29,31,37,41,42,43,46,47. I have c ut my own gears with it. I am selling my Myford ML7 lathe. So item is no longer required,
|
|
|
Sherline Indexing dividing head fixture mini micro lathe accessory model 3200 ?
up for auction is a sherline indexing head with face plate. Bead and tail stock. It is a recent estate fine and it is as found. It has some surface rust on the bed due to poor storage( top& bottom) see pictures. It is minor surface rust and will clean off easily, but it will leave a stain on the metal, but no pitting. The tail stock operates. The indexing button on the head stock does what it should do. It is a good usable tool that just need some clean up. I believe this is a model 3200 but I am not sure. any information will be appreciated. All that you see is all that I found for this tool. Please see pictures for condition. ask questions buyer pays shipping and delivery confirmation usps priority mail. thanks for looking.
|
|
|
RARE EMCO UNIMAT SL DB DIVIDING INDEXING HEAD ATTACHMENT WITH COG
GENUINE UNIMAT SL DIVIDING HEAD. FITTED WITH THE 48 TOOTH DIVIDING COG AS STANDARD. FREE UK RECORDED DELIVERY. WORLD WIDE TRACKED SHIPPING £16 I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE MOST OF MY USED ITEMS(LOTS MORE ITEMS THAN ON EBAY) ON MY OTHER SITE(CHEAPER AS NO FEES TO PAY! SO IT MAY BE REMOVED AND I RESERVE THE RIGHT TO DO SO! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
|
TAILSTOCK for DIVIDING HEAD machinist tools milling indexing *shlf
Center line to bottom is 4.5" Base is 6.5 x 3.75 inches. See my other auction if you need a Dividing Head. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have ... moreyour shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
ELLIS DIVIDING HEAD C1354 machinist tools milling indexing *shlf
See my other auction if you need a tailstock. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other ... moregreat deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Haas Control Box 7 Pin Automatic Digital Indexing Head 5C For Repair! NO RESERVE
No reserve! This is just for the box and power cord. Haas Control Box 7 Pin Automatic Digital Indexing Head indexer 5C Don't know much about it. It seems like it's missing a circuit board or something inside. It power light comes on. I did change the 15amp fuses. You decide what it's worth!
|
|
|
PYH Dividing / Indexing Head
PYH Dividing/ Indexing Head.10 degrees downward to 90 degrees upward from horizontal.Includes 3 jaw chick and dividing plate.Base measures 3-5/8" x 6-3/8"Approximately 7" overall height.Good condition but needs a little tlc to remove some rust
|
|
|
MECA MECATECNICA DIVIDING HEAD INSTRUCTION BOOK & INDEXING Rotary TABLE RR511
This sale is for ONE previously owned COPY(original not a photocopy) of: Meca. MECATECNICA UNIVERSAL DIVIDING HEAD INSTRUCTION BOOK, Gantryurizketa 1976) 19 pages bound in a dirty soft cover. This work includes machine specifications, nomenclature, maintenance instructions, direct indexing, dividing minutes, indirect indexing, differential indexing, spiral milling with instructions how to do it, and rack cutting. There are many illustrations and it included a test card for model DSU5175 No. D7728 tested September 20, 1979. ALSO INCLUDED IN THIS SALE is: Meca, MECATECNICA INDEXING TABLES SERVICE INSTRUCTIONS" Gantryurzketa 1983) 4 dirty pages. It offers advice for how to use the tables, equipment, diagrams, and tables. It includes a test card for model PD700 No. P9684A rested March 4, 1983. T his item is in good overall condition and ... morewould be a useful resource for the owner of the machine and/or make a nice gift for the collector of Meca products. This PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Conti
|
|
 |