|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT ... moreUNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. I ONLY SHIP VIA PRIORITY. I DO SHIP INTERNATIONALLY BUT WILL NOT LIE ON THE CUSTOMS FORM. THE ITEM WILL BE PUT DOWN FOR WHAT THE ITEM COSTS. AAAA
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT ... moreUNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. I ONLY SHIP VIA PRIORITY. I DO SHIP INTERNATIONALLY BUT WILL NOT LIE ON THE CUSTOMS FORM. THE ITEM WILL BE PUT DOWN FOR WHAT THE ITEM COSTS. AAAA
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Lot 5 pieces tapered lathe mandrel. These look pretty good. What you see is what will be in the box. Sorry: we cannot ship internationally.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT ... moreUNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. I ONLY SHIP VIA PRIORITY. I DO SHIP INTERNATIONALLY BUT WILL NOT LIE ON THE CUSTOMS FORM. THE ITEM WILL BE PUT DOWN FOR WHAT THE ITEM COSTS. AAAA
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
$18.00 Shipping Condition: Used Location: Sultan, United States Good condition. I cleaned up a little bit but could use a good thorough cleaning inside up to optimum condition. I’m sure it just needs taken down and ... morefully cleaned out the rest of the way. I will stand behind this one if there’s any issues.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Internal & External Jaw: The 3-jaw self-centering lathe chuck is equipped with an internal jaw and external jaw to expand its clamping range, and the ... moreexternal jaws are capable of clamping larger-sized industrial parts.
Buy It Now
Free Shipping Condition: New Location: Clinton, United States The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable. Reversible Jaw Set: The lathe ... morechuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle Diameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck ... moreBody Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Features：.
$16.25 Shipping Condition: Used Location: Rancho Cucamonga, United States NEW ATLAS CRAFTSMAN 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD NEW Click to Enlarge NEW QUALITY IMPORT ATLAS CRAFTSMAN 101 6 INCH LATHE 4 ... moreINCH 3 JAW SELF CENTERING LATHE CHUCK WITH KEY AND REVERSE JAWS. 1-8 BACKING PLATE FOR THE OLDER ATLAS CRAFTSMAN LATHES.THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States It features a wide clamping range and high precision. So you can deal with a variety of materials after fastening it with a single T handle. The lathe ... morechuck body is made of high-quality cast iron. The surface is nicely ground with a nice radius on all external edges.
$7.15 Shipping Condition: Seller refurbished Location: Orange, United States Bison 5” precision fine adjustment 6 jaw lathe chuck. VG condition with custom soft jaws only included.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 2 SETS OF JAWS - Internal and external jaw sets included. Internal clamping range: 3-40 mm (0.12"-1.58"). Jamming range: 40-130 mm (1.58"-5.12"). External ... moreclamping range: 40-120 mm (1.58"-4.7"). DURABLE IN USE - Both side of jaw teeth and guides are ground and hardened to HRC 58-62.
Buy It Now
$15.95 Shipping Condition: New Location: Diamond Bar, United States Product Description: High precision self-centering design. Superior gripping force to meet precision machining demands. Flimsy parts are specifically ... moreengineered by quenching process to enhance durability. Short cylindrical center mounting. One set of solid steel internal jaws. One set of solid steel external jaws, and chuck wrench are also included in the package. Body is made of high quality nodular cast iron suitable for high rotation speed. Product Features: Chuck Outside Dia. 5" 125mm) Chuck Body T hickness: 2-1/2" 58mm) Center Thru Hole Dia. 1.1811" 30mm) Bolt Circle Dia. 4.2520" 108mm) Mounting Thread: 3-M8. Max RPM: 3.800. Max Input Torque: 220 lbs. Internal Jaw Clamping Range: 0.0984" 2.5mm) 1.5748" 40mm) Internal Jaw Jamming Range: 1.4961" 38mm) 4.9213" 125mm) External Jaw Clamping Range: 1.4961" 38mm) 4.3307" 110mm) Accuracy: 0.002" Z Live Center is specializing in selling lathe accessories. All of our products are 100% inspected. Please feel free to contact us at 1-877-954-8323. We are open Monday through Friday 8:00 am to 6:00pm Pacific Time. Email: Product Returns: All of our products are in brand new condition. Returns are accepted for defect products or incorrect shipping within 14 days upon receiving only. Full refund or product replacement is at seller's discretion. Buyer is responsible for return shipment and insurance fee. Shipping and handling fee will not be returned. Feedback: Our goal is to keep a 5-STAR rating in all categories. If you have any questions regarding our products or services. Please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. Thank You! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle Diameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck ... moreBody Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Package Including: 1 x Lathe Chuck 3 x Jaws 1 x Wrench 3 x Screw 3 x Nut Features：.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable. Reversible Jaw Set: The lathe ... morechuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
Buy It Now
Free Shipping Condition: New Location: Casper, United States This high-quality wood lathe chuck is designed using durable steel to withstand high-intensity work. The jaws can be adjusted to center with superior ... moregripping force, improving the flexibility of the chuck, and enabling it to clamp most shaped workpieces.
4d 15h 15m 58s 0 bids
$97.48 Now
$82.55 Shipping Condition: Used Location: Key West, United States Compatible with lathe that use 1”x 8 tpi thread. This set contain 3 frequently used types of jaws and 1 large plate jaw so they can handle most shape ... moreand sized blocks. This set is easy to install and use.
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
$20.00 Shipping Condition: Used Location: Kansas City, United States 5" Bison 3605 Lathe 4 Jaw Scroll Chuck. See picture for details. Shipped via USPS. Message for combined shipping.
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States Both side of jaw teeth and guides are ground and hardened to HRC 58-62. Internal Jaw: Clamping Range A-A1: 0.098-1.574". External Jaw: Clamping Range ... moreC-C1: 1.496-4.331". Semi-steel chuck body made from high quality cast iron.
Buy It Now
Free Shipping Condition: Used Location: Clearwater, United States 5-C 4” K11-100. 3500 r/min.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 5" 4-jaw lathe chuck with independent jaws, with rear mounting K72 125MM1-3/16" Diameter thru hole.Rear mounting screws circle Diameter: 108mmRear recess ... moreDiameter: 95mmMounting screw threads: 3-M8 3 or 4 mounting holes
Buy It Now
Free Shipping Condition: New – Open box Location: United States Click here to see description.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Four jaw chuck 1. Four JawIndependent Chuck K72-125. Material: Plate is cast iron, claw is steel. You can make order with no worry. Warranty: 6 months' ... morewarranty for the machines, not for the consumables.
Buy It Now
Free Shipping Condition: Used Location: Tucson, United States Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ self centering 5 1/4" diameter 3 jaw D E Whiton hole is 1 1/2" x 8 tpi no key for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Buy It Now
$17.00 Shipping Condition: Used Location: Hopatcong, United States bought at auction over 20 years ago have not used it,, time to sell as downsizing due to age 3 jaw made in england all jaws mounted in scroll have identical ... moreserial numbers matching chuck serial #,,, outer jaws wired in have the same serial # but do not match chuck serial #,,, nickel plated, sorry no chuck key,, locking pin for taper is there but the end point is broken can be fixed or replaced
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States SHARS 4" 3 Jaw Self Centering Lathe Chucks w/ TIR Certificate + 1-8 Back Plate New. For back plate you would not need to drill any mounting holes but ... moreyou will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
Free Shipping Condition: New Location: Huntington Beach, United States Lathe chuck body made of high quality semi-steel. Hardened and ground. Hardened jaws. Self-Centering Lathe Chuck Plain Back 5" 3-Jaw Hardened. Includes: ... more2 sets of hard jaws and lathe wrench. Our Part # ALL-47766.
Buy It Now
Free Shipping Condition: New Location: Kanjhawla S.O, India Used for Lathe Chucks, 3 or 4 or 6 jaw chucks. Suitable for all makes.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States K72 4-jaw self-centering chucks with independent jaws feature short cylindrical center mounting. It can be used to extend machine functions. Both sides ... moreof jaw teeth and guides are ground and hardened.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States SPINDLE MOUNTING. STRAIGHT RECESS OR PLAIN BACK MOUNTING. Mounting screws: 3pcs M8. Body height: 50mm.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 5" 3-JAW SELF-CENTERING LATHE CHUCK. SPINDLE MOUNTING. With opening wrench. STRAIGHT RECESS OR PLAIN BACK MOUNTING. Body height: 50mm.
Buy It Now
$15.50 Shipping Condition: New Location: Saint Charles, United States For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States K72 4-jaw self-centering chucks with independent jaws feature short cylindrical center mounting. It can be used to extend machine functions. Both sides ... moreof jaw teeth and guides are ground and hardened.
Buy It Now
Free Shipping Condition: New – Open box Location: Converse, United States High precision short cylindrical center mounting. Why not give it a try!
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
$58.95 Shipping Condition: New Location: Diamond Bar, United States Recess Line Dia.: 6.4961" (165mm). All of our products are 100% inspected. Internal Jaw Clamping Range: 0.1575" (4mm) -3.3465" (85mm). Internal Jaw Jamming ... moreRange: 2.5591" (65mm) - 7.8740" (200mm).
Buy It Now
$26.95 Shipping Condition: New Location: Diamond Bar, United States All of our products are 100% inspected. Internal Jaw Clamping Range: 0.3150" (8mm) - 3.1496" (80mm). External Jaw Clamping Range: 1.9685" (50mm) - 6.2992" ... more(160mm). Chuck Outside Dia. : 6" (160mm).
Buy It Now
Free Shipping Condition: New – Open box Location: United States The wood lathe chuck body is made of casting material through CNC precision machining, This is high-precision self centering 4 jaw lathe chucks woodturning.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 4 Jaw Chuck K12-125. K12-125 4-jaw chuck 1 Screw 4 Chuck spanner 1 Jaw 4. ▲ 6 months' warranty for the machines, not for the consumables. Hope for your ... moreunderstanding. Model: K12-125. Maximum Input Torque: 100NM.
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States (65 mm-4 Jaw Self Centering (M14 x 1)). (50 mm-3 Jaw Self Centering (M12 x 1) and (M14 x 1 Thread). It can hold any long round bar up to 12 mm, which ... morecan pass through the chuck's bore. (65 mm-3 Jaw Self Centering (M14 x 1)). ).
Buy It Now
Free Shipping Condition: Used Location: Williamsburg, United States Bison 8212-5"/6 Lathe 5" Chuck Adapter Back Plate. Made In Poland.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws ... moreto hold industrial parts in the size range 0.16" / 4 mm - 7.87" / 200 mm.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 3 Jaw Self Centering Lathe Chuck. Center Hole: 1.18". Small Freight Item. Runout: 0.003".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Including: 1 x Lathe Chuck 3 x Jaws 1 x Wrench 3 x Screw 3 x Nut Specification： Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle ... moreDiameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck Body Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Features：.
$24.85 Shipping Condition: Used Location: Paramus, United States Used condition, it operates, shows signs of use. it is a little stiff. it needs to be cleaned and oiled. I do not have any other jaws for it.
Buy It Now
$18.40 Shipping Condition: Used Location: Alger, United States 3-1/4" 3 JAW LATHE CHUCK FOR RIVETT 608 LATHE MADE BY WASHBURN. USA MADE HAS 1-5/8-12 THREAD MOUNT HOLE THRU CHUCK 1 5/16" 1 SET OF JAWS& ... moreWRENCH NICE CON D ITION $1 0.00 S&H
Buy It Now
Free Shipping Condition: New Location: China Material: This 3 jaws self centering lathe chuck made of zinc alloy, corrosion resistance, high strength and durable. Application: The clamping range ... moreof 3 jaws chuck is from 10mm to 35mm, self centering, can be use for used for woodworking lathe.
Buy It Now
$8.70 Shipping Condition: Used Location: Atwater, United States ORIGINAL ATLAS CRAFTSMAN LATHE 5 INCH 3 JAW SELF CENTERING CHUCK+REV JAWS+KEY Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ORIGINAL ... moreEQUIPMENT ATLAS USA MADE 5 INCH 3 JAW SELF CENTERING LATHE CHUCK WITH REVERSE JAWS AND KEY AND 1 1/2-8 THREADED MOUNT. WORKS SMOOTHLY. KEY SHOWS USE. OUTSIDE JAWS SHOW WEAR ON THE TOP SURFACE. CHUCK KEY SOCKET SHOWS WEAR BUT WORKS FINE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Material: steel Model: 6"/8"/10"/15" Features: 1. Improve the accuracy of roundness, center of the circle, cylinder degree, etc. The oil ... morepressure raw claw does not produce bell mouth shape and centrifugal vibration, and has good control effect on the oil pressure claw forming ring. 2. Both the outer clamp and the inner clamp can be used. The hydraulic pressure claw can be adjusted according to the required size, which is convenient and quick to operate, saving time and effort. 3. The old chuck can effectively improve the precision and grip when using the forming ring. Packing including： 1*Jaw Boring Ring.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Material: Hardened Steel -Model: K11-100 -Jaw: 3 Jaw -High Precision: ≤0.002" / 0.05 mm -Mounting Thread: 3-M8 -Outside Diameter: 3.94" ... more/ 100 mm -Bolt Circle Diameter: 3.31" / 84 mm -Center Thru Hole Diameter: 0.866" / 22 mm -Chuck Body Thickness: 2.16" / 55 mm -Mounting Thread: 3-M8 -Internal Jaw Clamping Range (A-A1): 0.08"-1.18" / 2-30 mm -Internal Jaw Jamming Range (B-B1): 1.18"-3.54" / 30-90 mm -External Jaw Clamping Range (C-C1):1.18"-3.15" / 30-80 mm -Accuracy: 0.002" / 0.051 mm -Color: Silver -Item Weight: 7 lbs / 3.18 kg .
Buy It Now
$42.00 Shipping Condition: New Location: Saint Charles, United States SHARS 8" 3 Jaw Reversible Self Centering Lathe Chucks D1-4. 0039" TIR Runout Certificate NEW. Both side of jaw teeth and guides are ground and hardened ... moreto HRC 58-62. Internal Jaw External Jaw. Spindle Nose Dia: 2.50".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: 3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws New and High Quality. The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center ... moreMounting. Specifications: Diameter: 100 mm (3.94") Center Hole: 22 mm (0.866") Thickness: 55 mm (2.16") Bolt Circle Diameter: 84 mm (3.31") Runout: 0.002" Internal Jaw Clamping Range (A-A1): 2-30 mm (0.078"-1.18") Internal Jaw Jamming Range (B-B1): 30-90 mm (1.18"-3.54") External Jaw Clamping Range (C-C1): 30-80 mm (1.18"-3.15") Size: 100 mm (3.94") Jaw: 3 Jaw Model: K11-100 Color: Silver Material:Hardened Steel .
Buy It Now
$27.99 Shipping Condition: Used Location: Xenia, United States This chuck only has 2 teeth that fit. The other 3 I don't think will work with this model. They are just extra, so I'm throwing them in.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States It features a wide clamping range and high precision. After fastened by a single T handle, it can handle more objects than a 3-jaw one, in various shapes. ... moreThe lathe chuck is made of high-quality cast iron materials, rust and corrosion resistance.
Buy It Now
$75.95 Shipping Condition: New Location: Diamond Bar, United States All of our products are 100% inspected. Internal Jaw Clamping Range: 0.2362" (6mm) -4.3307" (110mm). Internal Jaw Jamming Range: 3.1496" (80mm) - 9.8425" ... more(250mm). Chuck Body T hickness: 4-1/8" (105mm).
Buy It Now
$29.95 Shipping Condition: New Location: Diamond Bar, United States All of our products are 100% inspected. Chuck Outside Dia. : 6" (160mm). Chuck Body T hickness: 2-1/2" (65mm). Body is made of high quality nodular cast ... moreiron suitable for high rotation speed. Accuracy: 0.002" (tested vertical
|
|
|
|
Cushman 5 inch 3 jaw 1 inch Shank Backplate Lathe Chuck Toolmaker Machinist
Scrolls smoothly. Shipping only to USA Please. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL UNION 5 INCH 3 JAW LATHE CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE
ORIGINAL UNION 5 INCH 3 JAW LATHE CHUCK+KEY ATLAS CRAFTSMAN SOUTH BEND LATHE Click to Enlarge Click to Enlarge GOOD USED ORIGINAL UNION USA MADE 5 INCH SELF CENTERING CHUCK WITH KEY AND 1 1/2-8 THREADS. JAWS IN GOOD USED SHAPE. KEY SHOWS USE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
2-5 inch dia Lathe backing plates for a chuck fit 9 inch south bend 1 1/2-8 ?
You are bidding on 2 five inch dia backing plates. If I remember correctly the threads are 1 1/2-8. They do fit a 9 inch southbend lathe. Should fit other lathes. The one on left is.988 thick& the flange is.443 thick. The one on right is 1.310 thick& the flange is.567 thick. Thanks for looking. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e55d6d32a-0x100-
|
|
|
Original South Bend Lathe Chuck 3 Jaw 9 Inch 10K 5 inch diameter
Original South Bend Lathe 5 Inch 3 Jaw Self Centering Chuck. 5 Inch Diameter. The Cushman Chuck Co. USA made for South Bend Lathes. Has South Bend Logo on back plate. See photos. 1 1/2 x 8 Threads and came on a South Bend 9 inch lathe. Will also fit 10K and other lathes with 1 1/2 x 8 threads. It is original and sold by South Bend Lathe for their lathes. Chuck is in fair to good condition. Has tool marks on the center face and jaws have their share of dings. I have showed them pretty good in the photos. Unit does chuck up fine and tight. Thread are in good condition. Only comes with One set of jaws shown. See photos. Comes with Chuck key shown in fair condition. See Photos. Shipping is a flat rate of $10.40 to any of the 50 USA States. I will not ship outside the US 50 States. Payment to be by Pay Pal. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e758167ee-0x100-
|
|
|
Vintage Logan 5 inch x 1 3/4" Lathe Chuck With Key, 3 Jaw, one key, 1 1/2 inch
Vintage Logan 5 inch x 1 3/4" 3 Jaw, With Key. One key slot for all jaws. Lathe Chuck. 1 1/2 inch. On May-12-13 at 22:50:47 PDT. Seller added the following information: Logan 436, The Dunlap brand was left from"Sell one Like This"
|
|
|
ATLAS CRAFTSMAN 9-12 INCH LATHE JACOBS PORTOMATIC KEYLESS CHUCK 1/8-5/8 #2 MT
ATLAS CRAFTSMAN 9-12 INCH LATHE JACOBS PORTOMATIC KEYLESS CHUCK 1/8-5/8#2 MT Click to Enlarge FINE WORKING JACOBS PORTOMATIC 1/8-5/8 CAPACITY KEYLESS DRILL CH UCK WITH#2 MORSE TAPER SHANK. WORKS SMOOTHLY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX
HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX HARDINGE 5-INCH 4 JAW LATHE CHUCK 36-HCX PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX
HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX HARDINGE 5-INCH 3 JAW LATHE CHUCK 30A-HCX PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
HARDINGE 5 Inch 4 Jaw Lathe Chuck Model L 36-HC Serial No. 82471
I am describing this the best I can. Please ask questions. Small amount of surface rust.
|
|
|
Drill/Lathe Chuck Jacobs No. 34, 1/2 inch Capacity with #3 Morse Tapor (ref 52.5
Heavy duty. Key not included.
|
|
|
5 INCH SKINNER HARDINGE LATHE CHUCK NO. H-55
5 INCH SKINNER HARDINGE LATHE CHUCK NO. H-55
|
|
|
ORIGINAL ATLAS CRAFTSMAN LATHE 5 INCH 3 JAW SELF CENTERING CHUCK+REV JAWS+KEY
ORIGINAL ATLAS CRAFTSMAN LATHE 5 INCH 3 JAW SELF CENTERING CHUCK+REV JAWS+KEY Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ORIGINAL EQUIPMENT ATLAS USA MADE 5 INCH 3 JAW SELF CENTERING LATHE CHUCK WITH REVERSE JAWS AND KEY AND 1 1/2-8 THREADED MOUNT. WORKS SMOOTHLY. KEY SHOWS USE. OUTSIDE JAWS SHOW WEAR ON THE TOP SURFACE. CHUCK KEY SOCKET SHOWS WEAR BUT WORKS FINE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Horton 5 Inch 4 Jaw Lathe Chuck,
Horton 5 Inch 4 Jaw Lathe Chuck. In good used usable condition Effort has been made to give an accurate and honest description of this item. Most items I sell are NOT new unless I specify so. therefore. What you see is what you get. All items are sold, AS IS, no returns unless the description was completely inaccurate. If I see any major flaws I will mention them. The most important thing you can do is ASK QUESTIONS! If there are any markings I will mention them so please do not speculate about age. Origin, or manufacturer you might end up disappointed. If you have any questions, please email me, as I would like to answer them prior to purchase, not after. Thanks for looking. And have a great day! INTERNATIONAL BUYERS: Prior to bidding please request-shipping information. Delivery Is Via International Priority Only. Up to a 4.00 dollar charge ... moremay apply due to added time used in customs processing.
|
|
|
Jacobs Model 18N Ball Bearing Chuck 5 MT Shank 1/8 -3/4 Inch =machine tool lathe
JACOBS 18N DRILL CHUCK The model is 18N. The chuck has a range of 1/8" 3/4" Made in the USA by Jacobs. Has a#3 Morse arbor on it#3 arbor is inserted into a#3/ 4 Morse taper drill sleeve This chuck will fit either a#4. or. Remove the drill sleeve to fit a#3, tailstock or spindle Specifications: 1/8-3/4" Capacity Ball Bearing 4JT Taper in Chuck 3MT Arbor 3MT to 4MT Adaptor- drill sleeve Made in USA Buyer will receive the EXACT item shown in the photos- INSTRUCTIONS FOR U.S.A. BUYERS We ship only to your address provided to us by PAYPAL–take care to verify the address that is on file with PAYPAL prior to making payment! METHODS OF PAYMENT and SHIPPING DETAILS FOR U.S.A. BUYERS WITH U.S.A. or PUERTO RICO SHIPPING DESTINATION…Pay for this auction using Paypal…Economy shipping and handling on this auction listing will be just 15.95 ... moreto the LOWER 48 U.S.A. states if your delivery address is a EBAY/ PAYPAL confirmed address We do offer shipping options other than'ECONOMY' if you need to receive your purchase more quickly-click on… Shipping and payments/ see more services/ see all details… at top of listing for details. Shipping to Guam. APO/ FPO or anywhere not located in the 50 U.S. STATES or PUERTO RICO will be more-buyers from any of these locations need to figure in the higher shipping costs BEFORE they purchase-if buyers from these locations have an'issue' with these shipping costs- DO NOT PURCHASE THIS ITEM! FOREIGN = NON-USA BUYERS = SEE SHIPPING INFORMATION BELOW) Handling fee of 3.99 is REQUIRED for any shipment to UNCONFIRMED ebay/ paypal shipping address. Sellers are not responsible for service transit time. Note that transit times may vary. Particularly during peak periods. Seller Info: We have been in the bicycle industry for more
|
|
|
Skinner Chuck Co. 5 inch 3 Jaw Lathe Chuck No. A3805-56
Up for auction is a Skinner Chuck Co. 5 inch 3 jaw self centering chuck. The chuck is used and has the dings and scrapes to show it. Jaw faces are nice with no dings. It's usable as it is. I gave it a quick cleaning. But I would recommend giving it a complete cleaning/lub. The backplate is included, but it is not usable as it is. Someone enlarged the threaded mounting hole so that it would fit over a shaft/collar. Very little thread remains. Plus it it banged up where the slotted holes are. I'm sure it could be remodified to fit your application depending on how industrious you are. The chuck key is also included. See pictures as they are part of description. No Reserve. Ask questions if you have any. Shipping cost includes Delivery Confirmation. Package usually goes out same day or next day after payment. Depending on time of day ... morepayment is received. No shipments on Sundays or holidays. I cannot be responsible for USPS delivery times. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14388f72c81-0x104-
|
|
|
5 1/2 INCH dia.1 1/8 10 tpi CHUCK MOUNT FOR UNKNOWN ENGINE LATHE
Up for sale is a 5 1/2 inch faceplate with 1 1/8 x10 thread. this has been used and will need to be machined to fit your chuck. this needs a good cleaning but can be used as is any questions please ask
|
|
|
Yuasa 6.5 inch lathe chuck 6 1/2 3 jaw with key GENUINE YUASA
This auction is for a 6.5 inch lathe chuck made by Yuasa. This chuck is in great condition. Please e-mail with any?s
|
|
|
6 INCH dia.2 5/8x5 tpi CHUCK MOUNT FOR UNKNOWN ENGINE LATHE
Up for sale is a 6 inch faceplate with 2 5/8x5 thread. this has been used and will need to be machined to fit your chuck. this needs a good cleaning but can be used as is any questions please ask
|
|
|
4 Jaw Chuck Metal Lathe 9.5" Diameter 2 inch bore South Bend Clausing Atlas
For sale is a good used 4 jaw metal lathe chuck. It is just under 10 inches in diameter with just about a 2" bore. Unknown brand. Appears to work as it should. You be the judge if you can fit this onto your lathe. Looks like you will need to use a camlock setup. S old as is- some minor surface rust- as shown-Due to shipping charges no returns accepted.
|
|
|
5 3/4 INCH dia.2 1/8x5 tpi CHUCK MOUNT FOR UNKNOWN ENGINE LATHE
Up for sale is a 5 3/4 inch faceplate with 2 1/8x5 thread. this has been used and will need to be machined to fit your chuck. this needs a good cleaning but can be used as is any questions please ask
|
|
|
4 5/8 INCH dia.2 7/16 x6 tpi or 2 3/8 x 6 CHUCK MOUNT FOR UNKNOWN ENGINE LATHE
Up for sale is a 4 5/8 inch faceplate with either a 2 3/8 x 6 or a 2 7/16 x6 thread. this has been used and will need to be machined to fit your chuck. this needs a good cleaning but can be used as is any questions please ask Please check the dimensions of your spindle carefuuly and ask any questions before the auction ends. this is a auction all pieces are sold as is no returns unless i made a mistake. these parts were measured to the best of my ability but i do not guarrantee that they will fit your machine. I added two pictures showing the dimensions of the id on this the first measured on the threads is 2.180 the second on the recess is 2.425
|
|
|
5 Inch 3 Jaw Lathe Chuck, Logan, Atlas, Craftsman, 1-1/2 x 8 tpi
Up for auction I have one 5 inch diameter 3 jaw lathe chuck that is threaded 1-1/2 x 8 tpi in good used condition. There is an additional step machined on the chuck jaws, please see pictures. What you see in the pictures is what you are bidding on. Jaws are not reversible. Item will be sold as is so please ask any questions before bidding. No international bidding.
|
|
|
VINTAGE BUCK METAL LATHE CHUCK 1 1/8'' X 8TPI 5 INCH W KEY DECENT USED
OLD BUCK CHUCK FROM AN OLD LATHE I AM PARTING OUT. DON'T KNOW WHO MADE THE LATHE BUT IT WAS A PRE LEADSCREW LATHE WITH A LOT OF PARTS MISSING AND I BELIEVE WAS MUCH EARLIER THEN THIS CHUCK. HAS NORMAL WEAR AND TEAR FOR AN OLDER 3 JAW BUT STILL PRETTY DECENT. IF IT FIT ANYTHING I HAD I WOULD KEEP IT. IF YOU WANT SUPRE PRECISION. GET A 4 JAW OR COLLETS! LOL. NOT ALL DINGED UP OR MASHED, FAIRLY SMOOTH, SHOULD BE TAKEN APART AND CLEANED AND LUBED.I HAVE 4 LATHES, A RIVETT, AMES,DALTON, AND AN OLD ATLAS AND THIS FITS NONE OF THEM! LOL. FEEL FREE TO EMAIL ANY QUESTIONS, I AM ALSO INCLUDING A NICE CHUCK KEY WITH THIS I FORGOT TO PUT IT IN THE PICTURES, IT MIGHT BE NEWER THEN THIS CHUCK BUT IT FINTS NICELY AND IS IN NICE CONDITION. FEEL FREE TO EMAIL ANY QUESTIONS. THIS CHUCK IS UNIVERSAL, NOT INDEPENDANT, SORRY, I DON'T HAVE AN EXTRA SET ... moreOF JAWS THAT ARE REVERSE. FEEL FREE TO EMAIL ANY QUESTIONS. JAW NUMBERS ARE CURLY STYLE NUMBERS, THIS WOULD MAKE A NICE CHUCK FOR RESTORATION OF AN OLD LATHE OF TO USE. THANKS! BACK HOLE IS 1 1/8TH INCHES ID AND MY TOOTH GAUGE SET SHOWS 8TPI. OVERSEAS SHIPPING PLEASE ASK FIRST.
|
|
|
CCS 19-5/8 Inch Diameter 4 Jaw Lathe Chuck 6 pin rear mount 20"
CCS 19-5/8 Inch Diameter 4 Jaw Lathe Chuck 6 pin rear mount 20" Up for sale we have a CCS 19-5/8 Inch Diameter 4 Jaw Lathe Chuck in good shape. Each jaw travels in and out just fine. It has 6 pins on the rear side for mounting. It is stamped CCS on the rear side. Great chuck on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The shipping weight 218 lbs and the dimensions are 20" L x 20" W x 9" H. Unit will be strapped to a pallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy ... morePayment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
4 Jaw Reversible teeth 5 Inch Lathe Chuck by Skinner Chuck Company
Skinner 5 Inch 4 Jaw Lathe Chuck Very good condition Reversible teeth for any shaped material Moves smoothly Threaded Spindle Made in the USA Please Feel Free to Contact with Any Questions Payment All payments are to be made through PayPal within 3 business days of end of auction. Potential extension may be permitted with approved request. Please contact us via email. Shipping Items will be shipped from Rochester NY. Shipping rates are non negotiable. We will ship anywhere in the continental United States. Shipping will be made after receipt of payment. Condition All items are sold"AS IS" Unless specified in listing. Due to the nature of used and surplus equipment no guarantee or warranties are offered unless specified in the description.
|
|
|
ALBRECHT KEYLESS CHUCK LATHE DRILLING 0-1/4 inch 6.5 mm
ALBRECHT Keyless Chuck 0-1/4 inch 0- 6.5mm MT3 JT1 Like new. Really Nice.
|
|
|
ATLAS CRAFTSMAN 9-12 INCH LATHE 5 INCH 3 JAW SELF CENTERING CHUCK+REV JAWS+KEY
ATLAS CRAFTSMAN 9-12 INCH LATHE 5 INCH 3 JAW SELF CENTERING CHUCK+REV JAWS+KEY Click to Enlarge Click to Enlarge Click to Enlarge BARELY USED ATLAS CRAFTSMAN 9-12 INCH LATHE 5 INCH 3 JAW SELF CENTERING CHUCK WITH OUTSIDE JAWS AND KEY WITH 1 1/2-8 MOUNT. IMPORT TOOL IS SUPER CLEAN AND SHOWS VERY LITTLE USE. HANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
5 INCH DIAMETER LATHE CHUCK BACK PLATE
5 INCH DIAMETER LATHE CHUCK BACK PLATE WITH 2 INCH 8 TPI THREAD. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14505e0fb3d-0x10c-
|
|
|
BUCK 439 LATHE CHUCK 5 INCH 3 JAWS 1 1/2 X 8 TPI
I purchased this at an estate sell. This is a Buck 15-439 lathe chuck 1 1/2 x 8 TPI. It has 3 jaws and measures 5 inches across. But it will open up bigger then that. It looks in good used condition. I don't have the chuck key for it. Buyer pays $12.85 for shipping and handling. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14510c3dd57-0xfe-
|
|
|
buck chuck 5 inch for hardinge lathe
5 inch buck chuck for lathe. It had been on a small hardinge lathe but the adapter for that has been removed. This chuck has 6 jaws so it really holds onto your part really well especially for longer holds. It also has 4 set screws so you can adjust center of part with an indicator without shimming to get center. Which is why everybody likes and wants a buck chuck.Shipping is continental 48 states. This is being sold with no reserve! So happy bidding.
|
|
|
ATLAS CRAFTSMAN UNION 3 JAW 6 INCH LATHE CHUCK 1.5 8 MOUNT WITH WRENCH
This listing is for a used Union lathe chuck. 1-1/2- 8 mounting. It was extra with a Craftsman lathe I purchased. It is in good working condition. Usual wear and tear(as shown in pictures) Smooth sliding jaws and mounting threads are in fine condition. Includes chuck wrench shown in pictures. Shipping is $12.50 USPS Flat Rate. In the USA only. I accept Paypal. Item will ship within 1 business day of cleared payment. Contact me with questions prior to bidding please.
|
|
|
Union 4 Jaw Chuck 5 inch metal lathe four jaw chuck USA Made
Union 4 Jaw Chuck 5 inch metal lathe chuck USA Made This auction is for a Union 4 Jaw Chuck.It is 5 inch and is part# 9405-H.Looks to be in nice shape. Take a look at the pics and see if you can use it.Shipping: $12.40 usps.US 48. four southbend craftsman atlas Please check my other auctions Powered by Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BTC 6083D5 3 jaw self sentering 8 inch D1-5 lathe chuck
You are looking at a 8 inch BTC 3 jaw self centering lathe chuck. It has a D1-5 mount. I got a new lathe and this chuck was on it. I needed a 10 inch chuck so I ordered one. I had to do a quick job before my 10 inch arrived so I had to use the 8 inch that I'm selling. In a sense it is brand new. It comes with a chuck wrench.Contact me with any?s. Because of shipping I only sell it the USA. Thanks for looking.
|
|
|
Bison 4 jaw 5 inch lathe chuck self-centering
Bison chuck made in poland
|
|
|
MACHINIST QUICK DIVIDING INDEXING HEAD 5 INCH CHUCK CNC MILLING LATHE
QUICK DIVIDING INDEXING HEAD WITH 5 INCH 3 JAW CHUCK NO INDEXING PLATE. THINK ITS MADE IN CHINA BUT ITS MADE WELL NO CHUCK KEY PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN ... moreLISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
ATLAS CRAFTSMAN DUNLAP 109 LATHE ORIGINAL 4 JAW 4 INCH CHUCK 1/2 inch 5 thread
ATLAS CRAFTSMAN DUNLAP 109 LATHE ORIGINAL 4 JAW 4 INCH CHUCK 1/2 inch 5 thread
|
|
|
5 inch Chushman 3 Jaw lathe chuck with key, 1 1/2" X 8 TPI
Chushman 5 inch three jaw chuck. 1 1/2 inch X 8TPI mounting. Ref# 53408 with chuck key.
|
|
|
Cushman 3 Jaw 5" Inch Lathe Chuck Ref. No. 5340 B
Another gem discovered in uncle's shop. Grumman surplus.I have my own so this one is for sale. Moves freely. Backing plate included, no key, or extra jaws 1-1/2 x 8tpi backing plate Any questions feel free to ask.
|
|
|
PRECISION 5 INCH THREE JAW UNIVERSAL LATHE CHUCK , POLAND PUTm-M5ZD
PRECISION 5 INCH THREE JAW UNIVERSAL LATHE CHUCK. POLAND PUTm-M5ZD Very LIGHTLY used but in like new condition throughout. 5 inch diameter, Removable backing plate currently machined with 1 1/8-8 threads. Plate can be replaced or modified as required. Heat Treated reversible jaws, As shown with Chuck Key. Heavy duty unit, high precision. Note: I am a retired Tool and Die Maker finally starting to clear out my personal tool supply so other Craftsman can put these wonderful tools that served me during my career so well back into service and not have them just sitting around in my tool chests. All of my tools are in Tip Top condition and have many years of quality service left in them. I have pampered them as they very well deserve. BID WITH CONFIDENCE!
|
|
|
South Bend 9 10 Lathe Cushman 5 inch 3 Jaw Chuck Atlas Craftsman Plain back
This is a Cushman five inch chuck. Great shape. Chuck works great smooth and tight. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 jaw lathe chuck 5 inch No. 16291
3 jaw lathe chuck 5 inch No. 16291 Looks to be in good condition but i don't have the chuck to move the jaws Most likely will need a good cleaning and oiling Please look at the 12 enlarged pictures closely and judge the condition of this item for yourself as our photos are a large portion of our description. What you see is what you get so if you don't see it in the photo's it is not included. If you have any questions please ask before you purchase this item and i will answer them promptly(usually within an hour) Shipping Information- Ships from Chicago same day as payment with insurance and tracking. International buyers please ask to see if this item is available for international shipping. Also please be aware that we are not responsible for customs fees added by other countries. Important- Your satisfaction is our number ... moreone goal. If you feel we don't deserve positive 5 star feedback in all categories for any reason please contact us before you leave your feedback so we can( and we will) resolve any issues you might have. Check out or great feedback and buy with confidence.
|
|
|
Lathe Chuck, 5 Inch, 3 Jaw COMES WITH CHUCK KEY
NICE 3 JAW CHUCK COMES WITH CHUCK KEY CHUCK SIZE 5' Check out my! THRU HOLE 3/64 GOOD WORKING CONDITION WE DO COMBINE SHIPPING FOR ARE CUSTOMERS THAT BUY MORE THEN ONE LOT JUST LET US KNOW THRU EBAY THANK YOU PLS BID WITH CONFIDENCE IF U HAVE ANY QUESTIONS PLS CALL ME 562 5007974 KEVIN
|
|
|
Hardinge Lathe Chuck Model E30A-HCX; 5 inch 3 jaw (CTAM# 6989)
Hardinge Lathe Chuck Model E30A-HCX; 5 inch 3 jaw Jaws move smoothly
|
|
|
RARE Machinist Lathe chuck 5 inch 3 jaw by BELCO England vintage
RARE Machinist Lathe chuck 5 inch 3 jaw by BELCO England vintage.~ lathe tool. Vintage. Very heavy(approx. 10.5 pounds) estate sale find. US only please. Payment is due within 3 days. Thank you so much for looking!
|
|
|
Lathe Chuck Key - T-Handle Wrench Tool - Size : 5/8" inch
This is a used 5/8 chuck key t handle. It came in a bunch of items i bought as a lot and i have noithing it fits.
|
|
|
Cushman 3 Jaw Lathe Chuck, 5 inch Diameter, 1-3/8 x 10 Threads
Up for auction is a used lathe chuck taken from a South Bend 405 lathe. A number of South Bend lathes made before the introduction of the 9 A.B, and C models had a spindle thread of 1.375- 10, and this chuck has a back plate to fit that. The jaws move freely. But show some wear. A chuck key is included.
|
|
|
Keyless Chuck 3-6 MM 1/8-5/8 inch with MT3 #3 Morse Taper Lathe Drill Press Tool
This auction is for one precision made 3-16 MM 1/8-5/8" key-less Chuck with#3 Morse Taper(MT3) French made for your lathe or drill press with a Morse Taper#3 or other sizes using appropriate adapters. Maximize your accuracy and performance with this high quality French made key less chuck for lathes and drill presses set up with a MT 3 tapered bore. Have you got a Logan. Southbend, Atlas, LeBlond, Lodge& Shipley or Mattison lathe or a Morse Taper Drill Press? This(MT3) Morse Taper#3 keyless chuck will do the job up to 16MM or 5/8" Note: See the pictures.I will allow return on this as I know you will be pleased with quality and condition. Must be returned in same condition shipped. Please notify within 14 days of purchase and return in original condition as shipped to you, return ship at buyers cost. I appreciate communication ... moreand will be able to serve you best should you want to return this if you can contact me through the CONTACT SELLER LINK as soon as possible and relay the details as to when I can expect the return so I can monitor the shipment as my mailbox is 1 mile down the driveway. Ships free, or.Pick up is available if you want to pick it up here in Malin OR, remember- CONTACT SELLER LINK and we will make arrangements as to time, No Sales Tax either way!
|
|
|
Vertex 3800-5821 5-inch 3-Jaw Front Mount Plain Back Lathe Chuck VSC-5A-FB
Description Vertex 3800-5821 5-inch 3-Jaw Front Mount Plain Back Lathe Chuck VSC-5A-FB Retail liquidation item. Listing as used because we know very little about this kind of equipment. Looks like it may have been used. But really have no idea. Has some nicks on the jaw side. Please inspect pictures. Box is crushed from handling. Comes as pictured. And includes what is pictured. Nothing else included. About Us We sell new. Used, and open-box retail liquidation merchandise. We do not sell"as-is. We stand behind every product we sell. Much of what we buy is liquidated and non-defective returned merchandise allowing us to pass big savings on to you. Due to the nature and specialized application of certain items. We are not able to test every item. Our hassle-free return policy protects you against any merchandise you receiver that may be ... morefound defective. Please see Return Policy below. Return Policy You may return an item within 14 days. If the item is defective we will refund original purchase price plus shipping cost. And we will pay for return shipping. Items returned for other reasons. Return shipping cost will be the responsibility of the buyer. Merchandise must be returned in the same condition it was sent. We participate in eBay's Hassle-Free returns program so you can buy with confidence. Contact Before Sale: Please let us know if you have any questions at all. We will be glad to help. After Sale: Please contact us immediately with any concerns. Unfortunately we are unable to offer technical support on items we sell. Template and graphics © 2011 Original Template Designs
|
|
|
South Bend Lathe, Clausing, Atlas, Craftsman, 5 Inch, 3 Jaw Chuck
This is a used Cushman 3 jaw scroll chuck. It's a plain back style chuck with no back plate. You'll have to machine and fit your plate to this chuck. Comes with mounting bolts and chuck key. Thanks for looking.
|
|
 |