In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
9.95
5d 13h 20m 8s
0 bids
$156.08 Shipping
Condition: Used
Location: Ellington, United States
Heavy Duty Cast Iron Right Angle Plate. No Reserve! 8" x 10" x 12" Overall.
$
25.00
Buy It Now
$35.00 Shipping
Condition: New – Open box
Location: Dayton, United States
1 - New old stock 5-1/2 x 8 x 10” Right Angle Iron GROUND FINISH-New but has been sitting in storage -Anti rust covering is still on then - I removed ... morethe wrapping and film for this picture but will come with these items still on.-You will have to clean with degreaser -May have minor imperfections due to sitting -Low price-They are heavy so I have to pack well. This is the reason for higher shipping. Ruler NOT INCLUDED
$
40.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
3-3/4" x 4" X 5" Ground Universal Right Angle Plate High Tensile Cast Iron 0.0005" Per 6". Parallel Within. 0005" per 6". Ground Finish Square Within. ... more0005" per 6". All Surfaces Closely Finished For Square And Parrallel References.
$
55.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: Littleton, United States
ECLIPSE Machinists Right Angle Plate Made in England. 3" wide, 2" deep,2 1/2" tall. Appear to have never been used.
$
50.00
Buy It Now
$16.99 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a6" x 5" x 3.75" Precision Ground Right Angle Plate Mill Machining Set-Up Fixture. Used in good condition.
$
80.99
Buy It Now
Free Shipping
Condition: New
Location: Cincinnati, United States
Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Parallel within 0.00025" per 6".
$
199.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Made of fine quality. Fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for ... moresquare and parrallel references. Ground finish: 0.0005' per 6" 8"L)x10"W)x12"H) Weight: 78 lbs Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
49.99
Buy It Now
$14.50 Shipping
Condition: Used
Location: Denver, United States
ECLIPSE 201 Machinists Right Angle Plate Made in England 3.5 x 3 x 4.5” in very nice preowned condition.See photos for dimensions and cosmetic details ... moresuch as minor scratches, scuffs, dents, dings, chipped paint, etc.Made in England 🇬🇧
$
44.87
13h 26m 38s
0 bids
$40.09 Shipping
Condition: Used
Location: Springfield, United States
Cast Iron Big Right Angle Plate 3-5/32 High, 7-3/4 Wide, 4-1/4 Deep. Two big slots for clamping to the machine table 780 wide ,1-3/4 long
$
20.00
Buy It Now
$23.43 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a6" x 5.75" x 5.75" Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
159.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Made of fine quality. Fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for ... moresquare and parrallel references. Ground finish: 0.0005' per 6" 5"L)x8"W)x12"H) Weight: 48 lbs Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
38.00
Buy It Now
$22.40 Shipping
Condition: Used
Location: Centerville, United States
Here we offer you this cast iron right angle plate block. It measures 3 7/8" by 4 1/8" by 4 7/8". Used condition with dings, dents and scratches. It is ... moremarked with name Carl Swanson, maybe previous owner's name. Please check all the photos for more details, they are part of the description.
$
58.50
Buy It Now
$74.04 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a 9-1/4" x 8-3/4" x 8" Heavy Duty Right Angle Mill Milling Set-Up Fixture Plate. Used in good condition.
$
31.95
Buy It Now
Free Shipping
Condition: New
Location: Jacksonville, United States
Precision right angle (90 degree) positioning. Horizontal dowel hole pattern: 1-1/4" apart with clearance for 5/32" roll pins. Horizontal bolt hole pattern: ... more1-5/6" apart with clearance for 1/4" bolts.
$
80.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Parallel within 0.00025" per 6".
$
99.95
Buy It Now
$75.12 Shipping
Condition: Used
Location: Wilmette, United States
This is a good condition very heavy duty. Including threaded hold-down holes in the base and face. The steel has oxidized. None of this effects the integrity ... moreof the item.
$
69.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Made of fine quality, fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for ... moresquare and parrallel references.Ground finish: 0.0005' per 6"4”x5”x6”(H) 7/8” thickness Weight: 10Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
$
25.00
Buy It Now
$26.50 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a6" x 5-3/4" x 5" Heavy Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
139.99
3d 9h 55m 27s
0 bids
$189.99 Now
$10.99 Shipping
Condition: Used
Location: Athol, United States
Heavy duty angle plate.
$
68.00
Buy It Now
$28.00 Shipping
Condition: Used
Location: Harker Heights, United States
This is a heavy duty USA brand right angle plate with dimensions of 6” X 8” X 6”. The steel body is more than 1” thick and the total weight is approximately ... more27 lbs. there are a few scratches and stains from prior use, but nothing that detracts from the usefulness of this tool. Shipped via UPS Ground to the 48 continental states. 
$
125.00
Buy It Now
$34.90 Shipping
Condition: Used
Location: Cedarburg, United States
Used Machinists Right Angle Plate. Made in USA.
$
162.95
Buy It Now
Free Shipping
Condition: Used
Location: Medina, United States
Taft Peirce No. 9191 Universal Angle Iron Quality made in the U.S.A. in good used condition. Weighs 7lbs. Id; 9191 Angle Iron 1/21 shelf.
$
110.00
Buy It Now
$38.10 Shipping
Condition: Used
Location: Wrightwood, United States
Well cared for tool, no rust, dings or etchings, tool is in Ike new condition. Box type angle plate, approximately 7” X 4” X 5” (175mm X 100mm X 125mm ... morehigh), machined and scraped for flatness and square. Cast iron box angle plates can be a versatile tool for layout, machine setups, tooling and inspection. The tool can be used as right angles or squares. A machining job can be fixed with one of its faces and rotated in 5 positions without the need of repositioning or disturbing accuracy. They can easily be made into special fixtures by providing tenons, pins or stops. They can also be used as parallels and height blocks. This tool shipping weight is 26 pounds and will be shipped by UPS. See photographs of actual tool for sale.
$
68.97
Buy It Now
$10.95 Shipping
Condition: Used
Location: Clinton Township, United States
Sine Plate 5" On Center Rolls, Opens 90° + Degrees, Fixture, Jig. It is hardened and precision ground and has 1/4" - 20 tapped holes in the top, sides, ... moreand end. It has a backstop that screws in with 2 cap screws.
$
23.99
Buy It Now
$18.60 Shipping
Condition: New
Location: Fairport, United States
Brand new in box. Buy with confidence. Trusted eBay seller since 1998.
$
350.00
Buy It Now
$125.13 Shipping
Condition: Used
Location: Johnson City, United States
Very Good Condition.
$
47.87
15h 42m 40s
0 bids
$40.09 Shipping
Condition: Used
Location: Springfield, United States
Cast Iron Big Right Angle Plate 3-5/32 High, 7-3/4 Wide, 4-1/4 Deep. Two big slots for clamping to the machine table 780 wide ,1-3/4 long
$
34.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: Oak Creek, United States
The two surfacesare ground No rust or any removed.Pic 9 Show weight of block /platePic's 10/17 Gives sizes of block/plate.
$
79.94
Buy It Now
Free Shipping
Condition: Used
Location: Plano, United States
Universal Right Angle Plate 8” x 5” X 4-1/2” Setup Block. It is subject to change, especially during peak periods.
$
259.99
Buy It Now
$112.54 Shipping
Condition: Used
Location: Middlebury, United States
Size: Length: 18 in. Width: 10 in. Height: 10 in. Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. Need it urgently?. ... moreCall us and we will do what we can to get it to you quickly.
$
78.99
Buy It Now
Free Shipping
Condition: New
Location: Marcus Hook, United States
Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Parallel within 0.00025" per 6".
$
296.25
Buy It Now
$40.00 Shipping
Condition: New
Location: Canada
This sale is for ONE NOS Busch Precision Inc. made UNIVERSAL RIGHT ANGLE PLATE. No. PE2705G. This plate is manufactured from treated-closed grained castings ... morewhich are heat-treated for strength. It measures 4-1/2" x 4" x 5" and it has been accurately precision ground. An ideal tool for checking squares and parallels. Please note that this item comes in its original packaging, which may be dirty from warehouse storage. A sample has been removed for photography and inspection only. This high quality USA made UNIVERSAL RIGHT ANGLE PLATE is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its
$
98.97
Buy It Now
$15.95 Shipping
Condition: Used
Location: Clinton Township, United States
Sine Plate 5" On Center Rolls, Opens 90° + Degrees, Fixture, Jig. It is hardened and precision ground and has 5/16"-18 tapped holes in the top, sides, ... moreand end. It has a backstop that screws in with 2 cap screws.
$
38.99
Buy It Now
$13.99 Shipping
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. To get a freight quote we will need to know the following Weight ... more(lbs, oz): 5. Need it urgently?. Call us and we will do what we can to get it to you quickly.
$
200.00
Buy It Now
$15.50 Shipping
Condition: Used
Location: Dearborn Heights, United States
This angle table is used. You can see the condition in the photos. We will send a new invoice each evening. Weight: 6-1/2 lbs.
$
88.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Made of fine quality. Fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for ... moresquare and parrallel references. Ground finish: 0.0005' per 6" 4-1/2"L)x5"W)x8"H) Weight: 26 lbs Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
22.00
Buy It Now
$34.85 Shipping
Condition: Used
Location: Hammonton, United States
Vintage Machinist Right Angle Set Up Plate Block 3 5/8”x3 7/8”x4 3/4” Tool. I got this in a lot at an estate sale. This item is a solid heavy Machinist ... moretool. Item needs to be cleaned up a bit. There is a name that looks like cow gill ? and a number 5 formed in this item. ITEM SOLD AS SHOWN AS FOUND PLEASE ASK QUESTIONS AND ASK FOR MORE PHOTOS IF NEEDED THANK YOU.
$
75.00
Buy It Now
$45.05 Shipping
Condition: Used
Location: Lapeer, United States
6"x 6"x 6" Ground Universal Right Angle Plate, very heavy, 17 lbs. +, Machinist tool, set up tool. Not sure what other measurements you might need for ... morethis so ask if you need something.
$
74.99
Buy It Now
$56.42 Shipping
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. Weight (lbs, oz): 34. To get a freight quote we will need to know the following Need it urgently?. Call us and we will ... moredo what we can to get it to you quickly. Size: Length: 6 in.
$
474.99
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
Suburban Tool Right Angle Iron Model URA-080916 New Free Shipping UPS Ground or Freight at Sellers Discretion Useful for clamping work in multiple positions. ... moreIdeal for squaring operations. Made from class 35-40 cast iron. All faces and ends finished square and parallel. Machined finish- Square and parallel within 0.002" per 6" Location: AH4)
$
110.00
Buy It Now
$76.22 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a10" x 10" x 10" Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
All surfaces closely finished for square and parrallel references. Ground finish: 0.0005' per 6". Weight: 36 lbs.
$
189.99
Buy It Now
$201.14 Shipping
Condition: Used
Location: Covina, United States
This is a Heavy Duty Japan Right Angle Plate in good condition. SPECIFICATIONS: Wall Thickness: 1" Overall Dimensions: 12" x 10" x 8" ... moreComes exactly as shown in pictures.
$
149.99
Buy It Now
$45.96 Shipping
Condition: Used
Location: Lombard, United States
Cast Right Angle Fixture Plate, Slotted , 10” x 7-5/8” x 7-5/8” Set Up Table. Used condition with dings dents and scratches. Previous owner added the ... moretwo round legs to use as a table set up. The two legs are removable. Please see photos for details. Thanks for looking Shipping price to the lower 48 only
$
60.00
Buy It Now
$25.24 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a6" Cubed (Nominal) Right Angle Plate Machinist Set Up Mill Milling Fixture. Used in good condition.
$
19.99
Buy It Now
$8.60 Shipping
Condition: Used
Location: Marietta, United States
This 340MM woodworking angle stop is the perfect addition to your toolbox. With a 90-degree right angle guide plate, it makes cutting and drilling at ... moreprecise angles a breeze. Made for business and industrial use, this angle plate is perfect for CNC, metalworking, and manufacturing projects. The item type is an angle plate, perfect for workholding and toolholding. It falls under the category of plates, specifically angle plates and irons. This used angle stop has been tested and is fully functional, ready to be put to use in your next project.
$
40.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
All Faces And Ends Are Finished Square And Parallel. Parallel Within. 0005" Per 6". Made Of Close-Grained Cast Iron, Thoroughly Seasoned And Carefully ... moreHeat Treated For Maximum Stability. Ground Finish Square Within. 0005" Per 6".
$
189.00
Buy It Now
$206.86 Shipping
Condition: New
Location: Madison Heights, United States
Made of fine quality. Fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for ... moresquare and parrallel references. Ground finish: 0.0005' per 6" 8"L)x9"W)x16"H) Weight: 109 lbs Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
50.00
Buy It Now
$8.70 Shipping
Condition: Used
Location: Jamestown, United States
Used good shape.
$
25.00
Buy It Now
$20.50 Shipping
Condition: New
Location: Racine, United States
Cast metal Right Angle plate 2 inch Wide, 4 Inch tall and long. 3/4 Thickness
$
60.00
Buy It Now
$82.56 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a12" x 10" x 8" Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
64.99
3d 4h 9m 27s
0 bids
$17.25 Shipping
Condition: Used
Location: Springfield, United States
Right Angle Plate, Harden with V-Groove. Size: 3.57” High; 2.84” Wide ; 3” Deep.140 Depth of the step10-32 threaded holes on the sides1/4-20 all other ... moreholesHas light grinding wheel mark and material chipped around few holes,
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: North Port, United States
Used. Free shipping to lower 48 states
$
48.51
Buy It Now
$19.00 Shipping
Condition: New
Location: Chino, United States
All face, ends and edges are finished square and parallel. Parallel within 0.00025" per 6". The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Why should you buy from us?.
$
49.00
Buy It Now
$17.10 Shipping
Condition: Used
Location: New Palestine, United States
Cast Iron Angle Plate 4-1/2” x 3-13/16” x 3-13/16” With Stop. Has Drilled and Tapped Holes to Accommodate setups and Stop. Very Good Condition. Has etching. ... moreSee Pictures. Bin-GS-26.
$
25.00
Buy It Now
$18.13 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is a5" x 5" x 5" Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
78.25
Buy It Now
Free Shipping
Condition: New
Location: Santa Monica, United States
Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Parallel within 0.00025" per 6".
$
50.00
Buy It Now
$27.51 Shipping
Condition: Used
Location: Lorain, United States
Up for sale is an 8-3/8" x 5-5/8" x 4-7/8" Right Angle Plate Machinist Mill Milling Set-Up Fixture. Used in good condition.
$
82.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. ... moreSquare within 0.0005" per 6". Parallel within 0.00025" per 6".
$
155.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification Material: 45# Steel, Brass Process: Grinding Style: Modern Shape: Rectangle Color: Silver Number of Items: 1 Assembly Required: Yes Precision: ... more0.02mm/0.0008in Max. Magnetic Force: >100N/cm² Pole Pitch: 0.5+1.5mm/0.02+0.06in Inclination Angle: 0-60° Center Distance: 10cm/3.94in Magnetic Chuck Size(L*W): 15*15cm/5.9*5.9in Handle Length: 14.5cm/5.7in Overall Product Size: 20*15*8cm/7.87*5.9*3.15in Package Size: 28*21*14cm/11.02*8.27*5.51in Net Weight: 11kg/24.25 lbs Gross Weight: 12kg/26.46 lbs Package Included 1* Permanent Magnetic Chuck 1* Handle 1* Chinese Sine Angle Comparison Table .
1 2 3 4 5 6
 In 

Former Listings  
 
PRECISION RIGHT ANGLE FIXTURE MACHINIST TOOLS GRINDING PLATE SINE *C
PRECISION RIGHT ANGLE FIXTURE MACHINIST TOOLS GRINDING PLATE SINE Condition/I n fo: Size 4 15/16 x 3 3/8 x 3 3/8 inches and weights 5 lbs 4 oz. Very Good condition. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have ... moreyour shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
RIGHT ANGLE PLATE USED/STEEL 2.5” x 3” x 4”
RIGHT ANGLE PLATE USED/STEEL 2.5” x 3” x 4” MADE IN USA. SIZE: FRONT WIDTH: 2.5” BASE LENGTH: 3” FRONT HEIGHT: 4” NEEDS RESURFACING FOR BETTER ACCURACY. MADE OUT OF STEEL w/ HEAVY DUTY PLATES. NO DAMAGE/ALL IS INTACT/ IN GOOD USABLE CONDITION. WHAT YOU SEE IS WHAT YOU ARE BUYING. EBAY PICTURES WILL SHOW ITS CONDITION. THIS ITEM IS FROM MY SURPLUS OF MACHINE TOOL INVENTORY. YOU ARE BUYING THIS ANGLE PLATE“AS IS-NO RETURN” PLEASE ASK QUESTIONS BEFORE(not after) BIDDING IF YOU DO NOT UNDERSTAND SOMETHING. CHECK OUT MY OTHER AUCTIONS& MY 100% FEEDBACK. BID WITH CONFIDENCE! Detailed item info/Product Information) Product Identifiers: Brand.USA Model.na Range.2.5” x 3” x 4” MPN.na Miscellaneous.Additional Features: Used for precision machining. PLEASE READ! This item is being sold“ As Is– No Return” and is not returnable. Auction open to Continental ... moreUSA and International bidders. Condition as represented by e-Bay pictures. More pictures available upon request. If you should have any questions. Please send them before(not after) you bid. You are responsible for knowing what you need. Timely payment by Pay Pal is expected by all winning bidders. All tools will be professionally packaged and shipped with in 2 business days upon receipt of payment( not counting weekends) SHIPPING: Shipping is to Pay Pal addresses only. If you need it shipped to another address please change your Pay Pal account address prior to purchasing. If you want your item FAST mention it. I will ship faster if you pay the upgrade amount for Expedited Service. I will ship within 2 business days of receiving cleared payment. Free Local Pickup DOMESTIC ORDERS: Shipping. Handling, and professional packaging costs for all states except Alaska and Hawaii will be calculated based on USPS/ UPS services to your zip/postal code. Shipping to US bidders will be standard USPS/ UPS ground. Shipping to Alaska and Hawaii will be calculated based on UPS air services to your zip/postal code. If this tool is lost or damaged I will work w
RIGHT ANGLE PLATE USED/STEEL 5” x 2-7/8” x 3-7/8”
RIGHT ANGLE PLATE USED/STEEL 5” x 2-7/8” x 3-7/8” MADE IN USA. SIZE: FRONT WIDTH: 5” BASE LENGTH: 2-7/8” FRONT HEIGHT: 3-7/8” MAY NEED RESURFACING FOR BETTER ACCURACY. MADE OUT OF STEEL w/ HEAVY DUTY PLATES. NO DAMAGE/ALL IS INTACT/ IN GOOD USABLE CONDITION. WHAT YOU SEE IS WHAT YOU ARE BUYING. EBAY PICTURES WILL SHOW ITS CONDITION. THIS ITEM IS FROM MY SURPLUS OF MACHINE TOOL INVENTORY. YOU ARE BUYING THIS ANGLE PLATE“AS IS-NO RETURN” PLEASE ASK QUESTIONS BEFORE(not after) BIDDING IF YOU DO NOT UNDERSTAND SOMETHING. CHECK OUT MY OTHER AUCTIONS& MY 100% FEEDBACK. BID WITH CONFIDENCE! Detailed item info/Product Information) Product Identifiers: Brand.USA Model.na Range.5” x 2-7/8” x 3-7/8” MPN.na Miscellaneous.Additional Features: Used for precision machining. PLEASE READ! This item is being sold“ As Is– No Return” and is not returnable. ... moreAuction open to Continental USA and International bidders. Condition as represented by e-Bay pictures. More pictures available upon request. If you should have any questions. Please send them before(not after) you bid. You are responsible for knowing what you need. Timely payment by Pay Pal is expected by all winning bidders. All tools will be professionally packaged and shipped with in 2 business days upon receipt of payment( not counting weekends) SHIPPING: Shipping is to Pay Pal addresses only. If you need it shipped to another address please change your Pay Pal account address prior to purchasing. If you want your item FAST mention it. I will ship faster if you pay the upgrade amount for Expedited Service. I will ship within 2 business days of receiving cleared payment. Free Local Pickup DOMESTIC ORDERS: Shipping. Handling, and professional packaging costs for all states except Alaska and Hawaii will be calculated based on USPS/ UPS services to your zip/postal code. Shipping to US bidders will be standard USPS/ UPS ground. Shipping to Alaska and Hawaii will be calculated based on UPS air services to your zip/postal code. If this tool is lost or
USED 3-SIDED STEEL RIGHT ANGLE PLATE 9" x 5" x 4-1/4"
UP FOR SALE IS THIS USED 3-SIDED STEEL RIGHT ANGLE PLATE 9" x 5" x 4-1/4" THIS IS A 3-SIDED RIGHT ANGLE PLATE. IT IS MADE OUT OF STEEL. HEAVY DUTY PLATES. IT MEASURES APPROXIMATELY 9" TALL. 5" LONG ON ONE SIDE, 4-1/4" LONG ON THE OTHER SIDE. THIS IS USED AND DOES SHOW SIGNS OF WEAR. THERE ARE SCARS AND RUST. IN GOOD USABLE CONDITION. NEEDS CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1296
CHALLENGE MACHINERY COMPANY UNIVERSAL RIGHT ANGLE IRON PLATE U-585 5" X 8" X 5"
CHALLENGE MACHINERY COMPANY UNIVERSAL RIGHT ANGLE PLATE OR IRON TOLERANCES: ALL FACES. SIDES AND ENDS ARE PRECISION GROUND PARALLEL WITHIN.00025" PRECISION SQUARE 5" X 8" X 5" RETAILS FOR $227.50 Shipping is by Parcel Post Please use the shipping calculator to find shipping charges to your address. We will combine shipping when possible on items that are purchased on the same day. We only accept PayPal and payment is expected within 24 hours of the close of the auction. We will ship Priority Mail International only. Please use the shipping calculator to find international shipping charges.
CUSTOM RIGHT ANGLE FIXTURE PLATE 3 1/2 x 2 3/8 x 3 1/2 weights 3 lbs 4 oz *C
CUSTOM RIGHT ANGLE FIXTURE PLATE 3 1/2 x 2 3/8 x 3 1/2 weights 3 lbs 4 oz*C C ondition/I n fo: Very Good condition. Some minor rust stains/ spotting All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. PAYMENT DUE WITHIN 3 DAYS OF AUCTION CLOSE. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy ... moreto send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
Precision Ground Right Angle Setup Anvil Block Plate 10" x 8" x 6" INV=10882
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Precision Ground Right Angle Setup Anvil Block Plate 10" x 8" x 6" approximately. When laid flat) 18mm wide slots No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned ... moreand as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13e70a63c30-0xf3-
ERON UNIVERSAL RIGHT ANGLE IRON PLATE PRECISION GROUND 5x8x12 Japan
This a nice ERON UNIVERSAL RIGHT ANGLE IRON PLATE PRECISION GROUND 5x8x12 made in Japan! In good condition Comes as shown on the pictures. Use message center if you have any questions. Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e7655b1fe-0x107-
Rino Ondrives Worm Gearbox 60:1 Right Angle Drive Stainless Mounting Plate Wheel
Rino Ondrives Worm Gearbox 60:1 Right Angle Drive Stainless Mounting Plate Wheel Really nice custom made Stainless base with tightening screws. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with FEDEX GROUND. AK HI to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. GC_gsrx_vers_486(GS 6.5.1(486)
BEC Camera plate and right angle adapter
This auction is for a BEC-ABSPU Anton Bauer Style Side Plate and BEC-RAA Right Angle Adapter. They are both in exceellent condition. The plate has velcro on it which can be removed if needed. Email with any questions. Ships to US addresses only. Payment via Paypal is due in 48 hours. Please take a look at my other items. Thanks 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ec1008766-0x10a-
HEAVY DUTY RIGHT ANGLE PLATE - 6" x 8" x 6"
aims HEAVY DUTY RIGHT ANGLE PLATE- 6" x 8" x 6" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a Heavy Duty Angle Plate in good condition. Specifications: 1-1/8" Wall thickness Pin Holes: 3/8" 1/2" 2" Overall Dimensions: 6" x 8" x 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY RIGHT ANGLE PLATE- 6" x 8" x 6" HEAVY DUTY RIGHT ANGLE PLATE- 6" x 8" x 6" Reliable Tool Inc. c 2011 | Powered by
Mitutoyo 4" X 4" X 4" Right Angle plate block with wood box fine condition
You are viewing a set of Mituotyo 962-112 4 by 4 by 4 right angle block block is drilled and tapped on one plane comes with wood box from local school system that removed machine shop from their school. may have been used a few times no wear tear. Initials or engravings etc. plastic cased View all the pictures and bid with confidence. Please check out my other items for more great deals I will combine shipping for you when I can. Thanks for looking May God Bless!
HEAVY-DUTY Right Angle plate 12" X 9" X 8" X 1-1/8" inches thick, weighs 40 lbs
UPS shipping for this item to USA 48 states only or no-fee pick up in downtown Vista CA 92083. Shipping is to USA only. Solid steel Right Angle plate 12" X 9" X 8" X 1-1/8" inches thick. Weight 40# This auction is for the right angle plate pictured below. It has been in barn-storage for several years and has some dirt and grunge and some rust but functionally it's as good as it ever was. There is a 3/4" 45° counterbored hole along one edge as pictured. Thanks for looking!
Right Angle Iron Plate precision USA 10x7x5.5 Super condition BUSCH Milwaukee
Auction is for a Right Angle tool. Made in the USA marked BUSCH WISC. Precision ground. All corners and edges are true. And clean. I have stored it in my cabinet for years with paste wax applied to the surfaces. Slightly used with a few holes in it. See photos. The short surface has 4 Holes diameter of 21/64" The long surface has two 1/4" holes not drilled-through(for alignment pins) And 9 holes drilled and tapped for#10-24 NC screws. Weighs 23.8 pounds. Shipping UPS or FedEx or Priority Mail. NOTE: We double check our auction items; once before listing and just before packaging. If you receive a misrepresented product. Please contact me, as I will be happy to assist you. Should the item not work on arrival. Unless of course I sold it in a not working condition or AS-IS condition, then please inform me ASAP of receipt of item- any ... moreitem found to be faulty after this period may be difficult to exchange. International buyers may be responsible for customs fees/tax and may experience customs-related delays. Which is unusual. I don't cover international return postage. Each case will be dealt with on an individual bases. Items can be returned for refund as long as: 1) Return request is submitted within a timely manner(e.g. 7 days) from the date you receive your item. 2) Item has never been used. 3) Shipping charges are not[usually] refundable. 4) Please return it in its original packaging. Problem? Email me!
Optical Comparator Right Angle Adaptor Plate 8" Long 3" Wide
Used Good Condition- Optical Comparator Right Angle Adaptor Plate 8" Long 3" Wide 2759 Powered by The free listing tool. List your items fast and easy and manage your active items.
Universal Right Angle Plate 5x4.5x8" cast
Ground angle plate measures approx. 5" L x 8 H. x 4.5- W. Has an inscription. Returns accepted but shipping cost not.
6" x 8" x 6" MACHINIST WORKHOLDING JIG SET-UP 90° RIGHT ANGLE BLOCK KNEE PLATE
6" x 8" x 6" MACHINIST WORKHOLDING JIG SET-UP 90° RIGHT ANGLE BLOCK KNEE PLATE CHALLENGE LH101 MACHINIST'S WORKHOLDING KNEE PLATE 6" x 8" x 6" 90 ° RIGHT ANGLE TWO 11/16" DIA. x 3/4" HEIGHT CIRCULAR KEYS SPACED 6" APART ON CENTER This listing is for 1 used workholding knee plate fixture in good overall condition with some minor cosmetic wear such as scuffs. Scratches and spots of light surface rust. Made by Challenge, model LH101. Keys are centered on the larger face. Made of solid steel, strong and durable and weighing over 27lbs. Shipping weight slightly higher. Features a convenient handle for easy positioning and carrying. For use in machine workholding applications such as metalworking. Don't miss your chance to own this item now! See pictures for more details and information ... moreof condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these p
Challenge L101 4 x 4 x 4 Inch Right Angle Plate (Inv.13590)
Challenge L101 4 x 4 x 4 Inch Right Angle Plate: Surface ground cast iron plate with locating holes and drilled and tapped mounting holes as shown in photo. LocV11Q) Inv.13590) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. ... moreAll international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
PRECISION GROUND RIGHT ANGLE PLATE - 12" x 6" x 6" HEAVY DUTY CAST IRON
This is a nice heavy cast iron ground right angle plate. It is in real good condition with 2 holes as seen in the pictures. 12x6x6x1inch
SMALL RIGHT ANGLE FIXTURE PLATE size 2 x 2 x 2 inches MACHINIST TOOLS *A2
SMALL RIGHT ANGLE FIXTURE PLATE size 2 x 2 x 2 inches MACHINIST TOOLS*A2 Condition/I n fo: Very Good condition The scale/rule in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications ... moreof future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
CHALLENGE 4X5X4 INCH RIGHT ANGLE PLATE 2 ---FREE SHIPPING---
We have for sale A USED CHALLENGE 4X5X4 INCH RIGHT ANGLE PLATE-FREE SHIPPING- IT HAS A 2 ON IT TO THE RIGHT OF THE BRAND NAME. The photos tell all that we know about it. It has some light rust on it. It is being sold UNTESTED AS We do not have the expertise to test it so it is being sold as is with no warranty implied. We only accept Paypal as a form of payment. If you have any questions email them and we will try to answer them. WE SHIP ONLY TO THE UNITED STATES. Powered by The free listing tool. List your items fast and easy and manage your active items.
RIGHT ANGLE PLATE FOR MACHINIST ROTARY TABLE, MILLING
RIGHT ANGLE PLATE FOR MACHINIST ROTARY TABLE 2-5/8" DIA THRU HOLE& 4) 5/16 BOLT HOLES ON FACE(2) 5/16 BOLT HOLES AND(2) 530 X 1" SLOTS ON BASE IN GOOD CONDITION OVERALL DIMENSIONS: 7-3/8" W X 6-7/8" D X 9" H APPROXIMATE SHIPPING WEIGHT: 25 LBS WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, ... morealong with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Jan-17-12 at 09:52:43 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
MACHINIST RIGHT ANGLE PLATE 4" x 4 1/2" x 3 5/8"
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
MACHINIST RIGHT ANGLE BLOCK PLATE GROUND 5-1/2" x 4-1/2" x 4-1/4" C.W. MILLER
UP FOR SALE IS THIS USED MACHINIST RIGHT ANGLE BLOCK PLATE GROUND 5-1/2" x 4-1/2" x 4-1/4" C.W. MILLER. THIS IS A MACHINIST RIGHT ANGLE PLATE BLOCK PLATE GROUND BY C.W. MILLER. THIS RIGHT ANGLE PLATE IS USED BUT IN GOOD SHAPE. MEASURES 5-1/2" x 4-1/2" x 4-1/4" IT DOES SHOW SIGNS OF WEAR FROM USE. THERE IS SOME RUST. THERE ARE SCARS. CHIPS, SCRATCHES, AND STAINS. THIS IS A GOOD HEAVY DUTY RIGHT ANGLE PLATE. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1694
USED MACHINIST SLOTTED RIGHT ANGLE PLATE BLOCK 6" x 5" x 4-3/4"
UP FOR SALE IS THIS USED MACHINIST SLOTTED RIGHT ANGLE PLATE BLOCK 6" x 5" x 4-3/4" THIS IS A SLOTTED RIGHT ANGLE PLATE BLOCK USED BY MACHINISTS. THIS RIGHT ANGLE PLATE IS USED BUT IN GOOD SHAPE. MEASURES 6" x 5" x 4-3/4" HAS 5/8" SLOTS. IT DOES SHOW SIGNS OF WEAR FROM USE. THERE IS SOME RUST. THERE ARE SCARS. CHIPS, SCRATCHES, AND STAINS. THIS IS A GOOD HEAVY DUTY RIGHT ANGLE PLATE. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1693
USED MACHINIST WELDER TOOLMAKERS RIGHT ANGLE PLATE BLOCK 6" x 6" x 6"
UP FOR SALE IS THIS USED MACHINIST WELDER TOOLMAKERS RIGHT ANGLE PLATE BLOCK 6" x 6" x 6" THIS IS A RIGHT ANGLE PLATE BLOCK USED BY MACHINISTS. WELDERS, AND TOOLMAKERS. THIS RIGHT ANGLE PLATE IS USED BUT IN GOOD SHAPE. MEASURES 6" x 6" x 6" IT DOES SHOW SIGNS OF WEAR FROM USE. THERE IS RUST. THERE ARE SCARS, CHIPS, SCRATCHES, AND STAINS. THIS IS A GOOD HEAVY DUTY RIGHT ANGLE PLATE. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1692
Right Angle Iron Plate precision ground USA 10x7x5.5 BUSCH Milwaukee
Auction is for a Right Angle precision ground slightly used tool. Made in the USA marked BUSCH WISC. All corners and edges are true. And clean. It's been in my cabinet for awhile with paste wax applied to the surfaces. Slightly used with a few holes in it. See photos. The short surface has 4 Holes diameter of 21/64" The long surface has two 1/4" holes not drilled-through(for alignment pins) And 9 holes drilled and tapped for#10-24 NC screws. Weighs 23.8 pounds. Shipping UPS or FedEx or Priority Mail. NOTE: We double check our auction items; once before listing and just before packaging. If you receive a misrepresented product. Please contact me, as I will be happy to assist you. Should the item not work on arrival. Unless of course I sold it in a not working condition or AS-IS condition, then please inform me ASAP of receipt ... moreof item- any item found to be faulty after this period may be difficult to exchange. International buyers may be responsible for customs fees/tax and may experience customs-related delays. Which is unusual. I don't cover international return postage. Each case will be dealt with on an individual bases. Items can be returned for refund as long as: 1) Return request is submitted within a timely manner(e.g. 7 days) from the date you receive your item. 2) Item has never been used. 3) Shipping charges are not[usually] refundable. 4) Please return it in its original packaging. Problem? Email me!
Granite Right Angle Inspection Plate
No certification but was checked at.00015" per ft, Approximately 200 lbs. We will quote for shipping depending on location(U.S)
Universal Right Angle Plate 4 1/2" x 5" x 8"
You are bidding on a used universal right angle plate Precision ground 4 1/2" x 5" x 8" Some surface rust as pictured
GUK FA 49/6 6 Buckle Plate Right Angle Folder
Roll up second unit 6 plate folding machine made by GUK-Falzmaschinen Griesser& Kunzmann GmbH& Co. Machine is from 1997. We replaced the steel/rubber rollers with all rubber rollers(see picture) In good shape. A little bit of rust on some of the table rollers which can easily be cleaned off.65 x 49 cm(25 x 19 inch) max sheet size
HEAVY DUTY RIGHT ANGLE PLATE 13-3/4" X 9-1/2" X 7" square surface plate tool
HEAVY DUTY RIGHT ANGLE PLATE 13-3/4" Tall 9-1/2" wide 7" deep condition as shown in photos weighs approx 50lb if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equiptment i can combine postage all items are sent within 2 business days thank you for veiwing
Machinist Right Angle Plate Block 2 5/8" x 2 7/8"x 2 9/16" long GUC gun smith
nice condition. Machinist Right Angle Block, about 2 5/8"x 2 7/8"x 2 9/16" long and weighs about 3 pounds, please look at pictures for description and condition, this came from a retired tool makers estate, thanks for looking, 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 USA and International Buyers: I will refund only if I have neglected to describe the item with reasonable accuracy. Please check all clothing measurements. Vintage is just that. And not meant to be new. West Coast(USA) shipping may cost more. We can combine shipping on multiple purchases. If unsure about anything, ASK QUESTIONS. International Buyers: We recommend Priority International, if you don’t specify this, your item will be shipped First Class, but at your own risk. Be aware that Customs Houses are opening packages ... moreand damaging items. I pack for your protection, but I have no recourse against your Customs House for damage they do on any item. I ship by the guidelines of the postal system. Please be aware that I am not responsible for your country’s Customs Fees. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ff459cc9f-0xfd-
Machinist Right Angle Plate Block 2 1/2" x 3 1/4"x 3 1/4" long EUC gun smith
very. Very nice condition, Machinist Right Angle Block, about 2 1/2"x 3 1/4"x 3 1/4" long and weighs about 4 pounds, please look at pictures for description and condition, this came from a retired tool makers estate, thanks for looking, 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 USA and International Buyers: I will refund only if I have neglected to describe the item with reasonable accuracy. Please check all clothing measurements. Vintage is just that. And not meant to be new. West Coast(USA) shipping may cost more. We can combine shipping on multiple purchases. If unsure about anything, ASK QUESTIONS. International Buyers: We recommend Priority International, if you don’t specify this, your item will be shipped First Class, but at your own risk. Be aware that Customs Houses are opening ... morepackages and damaging items. I pack for your protection, but I have no recourse against your Customs House for damage they do on any item. I ship by the guidelines of the postal system. Please be aware that I am not responsible for your country’s Customs Fees. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ff459ccad-0xf7-
Machinist Slotted Right Angle Plate Block 4 1/2" x 5"x 6" GUC
Machinist Slotted Right Angle Block. 4 1/2"x 5"x 6"and weighs about 9 pounds, used, but not all beat up. please look at pictures for description and condition, this came from a retired tool makers estate, thanks for looking, 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 USA and International Buyers: I will refund only if I have neglected to describe the item with reasonable accuracy. Please check all clothing measurements. Vintage is just that. And not meant to be new. West Coast(USA) shipping may cost more. We can combine shipping on multiple purchases. If unsure about anything, ASK QUESTIONS. International Buyers: We recommend Priority International, if you don’t specify this, your item will be shipped First Class, but at your own risk. Be aware that Customs Houses are opening packages ... moreand damaging items. I pack for your protection, but I have no recourse against your Customs House for damage they do on any item. I ship by the guidelines of the postal system. Please be aware that I am not responsible for your country’s Customs Fees.
NICE!! SUBURBAN TOOL MACHINED RIGHT ANGLE PLATE - 5" x 4" x 8"
aims NICE! SUBURBAN TOOL MACHINED RIGHT ANGLE PLATE- 5" x 4" x 8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Suburban Tool. Inc. Distributed by SPI. This is a Machined Right Angle Plate in GREAT condition. Model# URA-040508 Serial# Machined Specifications: Wall Thickness: 1" Overall Dimensions: 5" x 4" x 8" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! SUBURBAN TOOL MACHINED RIGHT ANGLE PLATE- 5" x 4" x 8" NICE! SUBURBAN TOOL MACHINED ... moreRIGHT ANGLE PLATE- 5" x 4" x 8" NICE! SUBURBAN TOOL MACHINED RIGHT ANGLE PLATE- 5" x 4" x 8" Reliable Tool Inc. c 2011 | Powered by
THORLABS AP90L LARGE RIGHT ANGLE PLATE MOUNTING ADAPTER 1/4" x 20 HOLES
Up for sale is a used Thorlabs large right angle plate. List price is $112.
Right Angle Mounting Plate (1905)
Right Angle Mounting Plate Flat rate shipping in the continental US No international shipping please. Please see my other auctions
Thorlabs: AP90 - Precision Right Angle Plate Nice!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Thorlabs: AP90- Precision Right Angle Plate Nice! Thorlabs Optics Precision Right Angle Plate Model# AP90 Right Angle/ 90 degree Bracket Mount Optical construction Up for bids is a Thorlabs Right Angle Mount You are bidding on what is pictured Thanks for having a look Click the link below for more info: List Price: Retails new at $75 Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: $13.50- UPS Ground/ Insured( Continental US Only only) ALL INTERNATIONAL SALES ARE SOLD AS IS I have 100s of Optical Parts& Equipment- listed on Ebay and in My Ebay Store- So follow the link below to my store. Check out my other Auctions ... morePayment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We now accept Pay Pal Payments from the US ONLY. For first time International Orders we prefer a Bank Wire. Recipient is responsible for all customs. Duties and taxes incurred and payable to the carrier. Buyer must contact seller within 3 buisness days. Or your order will be cancelled! Buyers in CA please add 8.25% for Sales Tax. Unless you have a fully completed CA Sales Tax Exemption Certificate. We will need a signed faxed or scanned copy of this. 650-569 3991 FAX Shipping Methods: FOB Redwood City; FOB origin The buyer pays shipping charges determined by recipient address or a Flat Fee- Check the listing for detalis. All shipments are sent via UPS. For orders outside the United States. International Economy will be used. International Buyers must get a shipping quote prior to placing their order. Buyers in Russia. Africa& the Middle East need to contact me prior to bidding. Fix Cost shipping is for Continental US Only- Hawiia& Alaska is 2X Please allow 2 Business Days to process your order once payment has been received. Some packages can ship same day
MACHINIST RIGHT ANGLE BLOCK PLATE GROUND 3 X 3-1/4 X 4-1/4
MACHINIST RIGHT ANGLE BLOCK PLATE GROUND 3 X 3-1/4 X 4-1/4 Made of cast iron ground and normalized. This angle plate has been modified as you can see. Many. Many 1/4-20 holes for clamping I'm sure you know how much work went into doing these holes. I sandblasted it to strip the rust away. You will fnd many angle plates for $40. $60 or more. This auction starts at $5.00 Lets be honest. I want to sell this angle plate. I will get what the auction will pay. You will get it for the price you want to pay which is only fair. Good luck bidding. The weight is 4# plus shipping.
J.C. Busch Machinist’s Universal Right Angle Block Plate 8-1/8” x 5-3/16”
This Sale is for a J.C. Busch Machinist’s Right Angle Block Plate 8-1/8” x 5-3/16” Manufacturer: J.C. Busch Co. Machinist’s Universal Iron Right Angle Block· 90°· 8-1/8” x 5-3/16” SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. ... moreShipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or Venezuela. International Buyers: Duties and Taxes Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional co
USA! CHALLENGE RIGHT ANGLE IRON PLATE 6" X 8" X 6" MODEL LH101
Challenge Right Angle Iron Plate Made in the USA! Measures 6" x 8" x 6" Tapped Hole on face is approx 1/2" Shipping Weight is 28 lbs Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. Note for international buyers. Weight limits for flat rate boxes are as follows: Small 4 lbs. Medium/Large 20 lbs If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
J.C. Busch Co. Machinist’s Machined Right Angle Plate 8” x 5”
This Sale is for a J.C. Busch Co. Machinist’s Machined Right Angle Plate 8” x 5” Manufacturer: J.C. Busch Co. Machinist’s Universal Iron Right Angle Plate 90°· Dimensions: 8 Inches x 5 Inches SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration ... moreto all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Africa. Armenia, Bahrain, Iraq, Jordan, Kazakhstan, Kuwait, Kyrg
Bridgeport Right angle plate, rotary table, horizontal, vertical
This is a bridgeport plate that converts your horizontal rotary table to a vertical position. Real nice shape. Nothing broken. came out of a school with very little use. Very low opening bid! I WILL NOT SHIP THIS PIECE YOU WILL HAVE TO COME AND GET IT. PAYMENT IS DUE WITHIN 5 DAYS.
RIGHT ANGLE FIXTURE BLOCK PLATE 3x3x2x.62 weighs 2 lbs MACHINIST TOOLS *D
RIGHT ANGLE FIXTURE BLOCK PLATE 3x3x2x.62 weighs 2 lbs MACHINIST TOOLS info/size: Very good condition I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 2 days of auction close. Let me know if you are bidding on multiple items and I will give you a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance ... morefor overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
RIGHT ANGLE FIXTURE V BLOCK PLATE 4.4x3x3x.87" weighs 4 lbs MACHINIST TOOLS *D
RIGHT ANGLE FIXTURE V BLOCK PLATE 4.4x3x3x.87" weighs 4 lbs MACHINIST TOOLS info/size: Some very light engraving. Otherwise very good condition I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 2 days of auction close. Let me know if you are bidding on multiple items and I will give you a payment extension. Foreign buyers are responsible for all import duties and taxes. Shipping ... morecosts do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
CHALLENGE 9 X 10 X 12 -L101-3 1 1/16 SLOTTED RIGHT ANGLE PLATE
CHALLENGE 9 X 10 X 12-L101-3 1 1/16 SLOTTED RIGHT ANGLE PLATE
Two Machinist's Right Angle Plate Blocks: 3" x 3" and 4" x 2.5", Used
We are selling these two MACHINIST'S RIGHT ANGLE PLATE BLOCKS for a local machinist who facing some stiff medical bills and needs to sell some of his tools. The larger block has faces measuring 4" x 2-5" The smaller block has faces measuring 3" x 3" Both blocks are used but in very good condition. There is NO RESERVE! There is NO HANDLING CHARGE! Connecticut residents without a valid tax ID are subject to 6.35% Sales Tax on Purchase Price SHIPPING: Buyer pays postage* This item can be picked up here in Coventry. CT at no charge. Or it will be shipped within 1 business day after receipt of payment via USPS Parcel Select or Priority Mail not to exceed $11.00* 100% SATISFACTION GUARANTEED! We want our customers to be happy! If the item is not as described we will refund purchase price and postage if it is returned within ... more14 days of receipt and in the same condition. Please contact us if you have any questions or would like additional photos. Good Luck.J&C and SM.
Nickel Plated Steel Right Angle Plate 90° 8" x 8" x 22" Height 3/4" Thick
Nickel Plated Steel Right Angle Plate 90° 8" x 8" x 22" Height 3/4" Thick From our inventory. We are selling a Nickel Plated Steel Angle Plate. Specifications: More Information: Dimensions: 8" x 8" x 22" Height Thickness: 3/4" Angle: 90° Construction: Welded. Machined, then Nickel Plated Offset: 1/8" Per Step Face: 3/8" Diamaeter Bolt Holes Base: 1/2" x 1" Bolt Holes RR-1-B 120 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our ... moreinventory. If you have any questions. Please ask. Shipping Weight: 120 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBay’s policy. However. You can use a Credit Card through PayPal as a “one time payment”. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 U
Heavy Duty RIGHT ANGLE MACHINE PLATE IRON FIXTURE 8"
Heavy Duty RIGHT ANGLE MACHINE PLATE IRON FIXTURE 8" Pair Machinist Angle Plates 8" 2 Pcs.
HEAVY DUTY 12-1/2" X 8-1/2" X 6-1/2" RIGHT ANGLE IRON / PLATE
Heavy Duty Right Angle Iron/Plate Measures 12-1/2" x 8-1/2" x 6-1/2" Cast Iron Plate 3/4" x 5-1/2" Slots Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT ... morepay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
PRECISION RIGHT ANGLE PLATE machinist tool maker 12 3/4" x 4" x 3 7/8"
Angle Plate Not Marked 12 3/4" Tall x 4" x 3 7/8" Powered by The free listing tool. List your items fast and easy and manage your active items.
Challenge Cast Iron Right Angle Knee: / PLATE
D*E*S*C*R*I*P*T*I*O*N THIS AUCTION IS FOR CHALLENGER RIGHT ANGLES OR KNEE ANGLES PLATE. THIS TOOL IS WIDELY USED FOR MAKING FIXTURE AS WELL AS FOR CHECKING SQUARENESS AND PARALLELISM OF SURFACE. ALL MACHINED FACES ARE SQUARE AND PARALLEL AND JOB CAN BE ROTATED IN DIFFERENT PLANES THAT ARE SQUARE WITH RESPECT TO EACH OTHER. THIS TOOL WAS SITTING ON A SHELF IN THE BASEMENT, OF THIS ESTATESALE. LOOK LIKE WAS NEVER USED, BUT I AM GOING TO LIST AS USED. ONLY MINER SUPERFICIAL RUST, SIZE 9 INCH- BY 16 INCH– BY 8 INCH– WEIGHT ABOUT 88 LBS. FREE LOCAL PICKUP OR THE WINNER MAKE ARRANGEMENTS FOR PACKAGE AND SHIPPING. SOLD AS-IS AS SHOWN SO PLEASE VIEW ALL PICTURE AS THEY ARE PART OF THE DESCRIPTION. EMAIL ANY QUESTIONS BEFORE BIDDING. NO RETURN. PLEASE SEE MY OTHER ITEM. SHIP ONLY IN THE U.S.A) SHIPPING COST IS A SET PRICE) PAYPAL ONLY) THANKS FOR ... moreLOOKING. BAYER ALWAYS PAY RETURN SHIPPING– NO REFUNDABLE PLEASE SUBMIT PAYMENT WITHIN 3 DAYS OF AUCTION END. THANK YOU. WE MAY SHIP OVERSEAS BUT ONLY IF YOU CHECK WI THANK YOU. TH US FIRST. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144a01c8df4-0x115-
PRECISION GROUND ANGLE PLATE 8 X 8 90 DEG MOUNTING FIXTURE RIGHT ANGLE WITH SLOT
PRECISION GROUND ANGLE PLATE 8 X 8 90 DEG MOUNTING FIXTURE RIGHT ANGLE WITH SLOT PRECISION GROUND ANGLE PLATE 8 X 8 90 DEG MOUNTING FIXTURE RIGHT ANGLE PLEASE LOOK AT THE PICTURES SO YOU CAN SEE THE CONDITION AND MEASURMENTS OF THE FIXTURE.
Steel Right Angle Plate 6" x 5-13/16" x 11-7/8"
Steel Right Angle Plate 6" x 5-13/16" x 11-7/8" From our inventory. We are selling a Steel Right Angle Plate. Specifications: Dimensions: 6" x 5-13/16" x 11-7/8" Hole size and spacing: 2) 0.680" x 1.175" Diameter Oval(2) 0.230" Diameter(10) 0.280" Diameter ST35-2 24 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 24 lbs. To calculate shipping. Payment Types We are only allowed ... moreto accept PayPal as payment per eBay’s policy. However. You can use a Credit Card through PayPal as a “one time payment”. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package
Sherline 8700 - CNC Rotary Table Indexer w/right angle plate, tail stock + accys
Used Sherline 8700 CNC Rotary table. Works fine. Comes with accessories including Sherline right angle attachment. This was bolted to a Dyna DM2400 benchtop CNC milling machine. Also comes with spud that threads into table to hold a Sherlne Chuck. Also. A Sherline tailstock comes with it, though you will have to make a small riser plate to bring it up to the table's center line. Includes a fixture plate, T nuts and screws and a new 6' controller extension cable. Here is a video of it operating: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144cb6aa6fa-0x111-
Angle Plate Set of Two 4 1/2" x 8" Drilled & Tapped RIGHT ANGLE PLATES
Angle Plates- Set of Two; Approx. 4 1/2" X 8" Drilled and Tapped; In very good condition;
CHALLENGE 6 X 6 X 6 L101 RIGHT ANGLE PLATE
CHALLENGE 6 X 6 X 6 L101 RIGHT ANGLE PLATE(not slotted) NOTE: UPGRADE TO PRIORITY MAIL FOR JUST AN EXTRA $2.00. FEATURED ITEM(S) Challenge 6x6x6 L101 Right Angle Plate. Thickness 7-8" Used in very good condition. Ships the same day as ordered.Please contact for additional images or information. YOU DO NOT HAVE TO HAVE A PAYPAL ACCOUNT TO SHOP WITH US* You can make a'one time' payment with paypal. If this listing states that you need to have a paypal account please contact us and will revise the listing so that you can make the purchase. We will soon accept credit cards without using paypal. Please contact us for information on payment methods. Trades are accepted. If you want to trade an item please contact us to work out the details before buying or bidding. Please contact me with form of payment within 48 hours of the auction ... moreend or risk item being re-listed. Payment are due within 48 hours after auction end or a non-payment dispute will be filed with ebay. I reserve the right to cancel bids at anytime and for any reason. Bidders with zero feedback may be deleted unless you contact me FIRST before bidding. All sales are final. Colorado Sales Tax is 4% for Colorado Residents. If the invoice is not correct please do not pay until you have contacted me first to resolve the matter. BOOK PURCHASES* All books are shipped in poly-bags or postal-paper and with tracking and delivery confirmation(domestic) Most orders are shipped within 24 hours of payment confirmation. Shipping can be combined but costs may vary so please contact for details. Most purchases over $100 will be shipped with insurance to be paid by seller. International buyers please see below. CARD PURCHASES* All cards are placed in soft penny-sleeves and hard plastic protectors and then shipped in a bubble mailer. All U.S. packages are mailed with tracking and delivery confirmation. Tracking numbers will be emailed to the buyer. Save on multiple wins and purchases by combining shipping. Cards priced under $4 may be shipped in a standar
Large Machinist Right Angle Plate 8" x 10" x 12"
Please call 203-592-8402
Right Angle Mounting Plate (1906)
Right Angle Mounting Plate flat rate shipping in the continental US I will combine shipping on multiple items. No international shipping please. Please see my other auctions
! Suburban Tool 6" x 6" x 6" Plain Webbed Machined Right Angle Plate PAW-060606
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- Suburban Tool 6" x 6" x 6" Plain Webbed Machined Right Angle Plate PAW-060606. This auction is for a used Suburban Tool 6" x 6" x 6" Plain Webbed Machined Right Angle Plate. It is model# PAW-060606. Unit has some normal signs of use. Including some magic marker on the red, but this tool has not been abused. The faces are not pitted or show any sign of rust. We have a great starting bid and we are including a 30-day warranty on this sale! Only what is listed above and/or shown in the pictures below are included in this auction. Item weighs about 15 1/2 pounds. Used condition. This item is being sold with a 30-day warranty. Check the shipping calculator ... morefor S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. If you desire combined shipping, contact us before payment and we will send you a revised eBay invoice. This item will be insured for the winning bid amount. Shipping is limited to addresses within the United States(U.S. ONLY. We ship via unless other arrangements are made. Small items may be shipped via USPS. Please contact
ERON UR9 Right Angle Knee Iron Plate Precision Ground
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ERON UR9 Right Angle Knee Iron Plate Precision Ground Please see pictures for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund, less shipping. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
Right Angle 90 Degree Machining Set Up Angle Plate 8" x 8" x 8"
Right Angle 90 Degree Machining Set Up Angle Plate 8" x 8" x 8" Good Condition 85-A Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1453e443353-0x116-
Angle Plate 4 1/2" x 8" Drilled & Tapped RIGHT ANGLE PLATES ANGLE IRON
Angle Plates- Approx. 4 1/2" X 8" Drilled and Tapped; In very good condition;Currently three available Please note that two of these will fit in a US Postal Service Priority Mail fixed rate box for $ 12.35 and three will fit in a Large fixed rate box for $ 17.45 If you want to combine shipping with any of our other listings. Go a head and"Buy It Now" and then request an invoice before checking out.
ERON RIGHT ANGLE PLATE 8” X 4-1/2” X 5"*ONTARIO, CALIF.* NO RESERVE!~NO RESERVE!
ERON RIGHT ANGLE PLATE 8” X 4-1/2” X 5" USED BUT IN GOOD WORKING CONDITION ERON 8” X 4-1/2” X 5” RIGHT ANGLE PLATE NO RESERVE AUCTION STARTING@ ONLY $0.99! WEIGHT 21 LBS. COMES AS SHOWN* WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY R ETURN SHIPPING MUS T BE PAID BY THE BUYER! WE ENCOURAGE ... moreALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? F EEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951* PLEASE VISIT OUR STORE OFTEN TO VIEW A WIDE VARIETY OF INDUSTRIAL ITEMS. INVENTORY CHANGING DAILY. THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
RIGHT ANGLE PLATE 8X12X8
RIGHT ANGLE PLATE 8X12X8
Black & Decker Shorty 1/4" Right Angle Drill (Data Plate Missing)
The drill is used and shows a good bit of wear but still works. Shipping international will be additional cost.
Angle Plate - Right Angle Block - Fixture Plate - Machinist / Toolmakers Tools
You are looking at an Angle Fixture Plate. In very good condition. Dimensions(photo 1) are 5 1/8" x 3 11/16" and height is 4 3/8" The larger holes are tapered to 5/16 x 18 TPI. And the smaller ones are tapered to 1/4 x 20 TPI. I made 9 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST/ SHOP STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.
UNIVERSAL RIGHT ANGLE MACHINE PLATE IRON FIXTURE 8" X 6" 7" X 8"
YOU ARE BIDDING ON AN UNKNOWN UNIVERSAL RIGHT ANGLE MACHINE PLATE IRON DIMENSIONS: 8' X 6" one side. 7" X 8" other side ITEM IS IN GOOD USED WORKING CONDITION We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR ... moreSTORE. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-146c3f2e437-0x107-
JAPAN! HEAVY DUTY 12" x 10" x 8" RIGHT ANGLE PLATE
This is a Heavy Duty Japan Right Angle Plate in good condition. SPECIFICATIONS: Wall Thickness: 1" Overall Dimensions: 12" x 10" x 8" Comes exactly as shown in pictures.
CHALLENGE RIGHT ANGLE PLATE 9X10X12 L101-3-11/16
CHALLENGE RIGHT ANGLE PLATE 9X10X12 L101-3-11/16
Lintech 4" Linear Actuators M1, Size 23 Motor Flange, Right Angle Mounting Plate
Two LinTech linear actuators with four inch travel. Home switches and overtravel switches. Part# M1-104404. They use size 23 stepper or servo motors to drive the ball/acme screws. A right angle mounting plate will precisely mount the two actuators perpendicular to each other. Used in a production machine but still in great shape with lots of remaining life.
CHALLENGE Right Angle Plate. 3 1/2 X 4 X 4 T L101 In Original Box
Angle plate manufactured by the Challenge Machinery Company of Michigan. Stamped 3 1/2 X 4 X 4 right angle Model? L101
CHALLENGE RIGHT ANGLE PLATE 4X5X6 L101
CHALLENGE RIGHT ANGLE PLATE 4X5X6 L101 PLEASE LOOK AT PHOTOS.AND JUDGE CONDITION FOR YOURSELF PHOTOS ARE OF THE ITEM YOU WILL RECEIVE! SELLING AS IS. PAY PAL ONLY,PAYMENT DUE WITH IN 3 DAY'S, OR ITEM WILL BE RELISTED THANK YOU! I WELCOME ALL REASONABLE OFFER'S! I TRY TO LIST ALL ITEM'S AT OR BELOW MY COST. EVERY CUSTOMER IS VERY IMPOR TANT TO ME! PLEASE LEAVE ME 5 STAR POSITIVE FEEDBACK, I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK! MY SHIPPING CHARGE INCLUDES PACKING MATERIAL HANDLING& SHIPPING. RETURN'S OR REFUND'S FOR PURCHASES PRICE ONLY! SHIPPING AMOUNT CAN NOT BE REFUNDED. IF YOU CHOOSE TO RETURN A ITEM IT MUST BE DONE WITH IN 3 DAY'S AND BUYER PAYS RETURN SHIPPING. IF THERE IS A PROBLEM PLEASE CONTACT ME I CAN AND WILL WORK IT OUT. THANK YOU
CHALLENGE RIGHT ANGLE PLATE SLOTTED 5" X 6" X 12" *ONTARIO, CALIF.*
CHALLENGE RIGHT ANGLE PLATE SLOTTED 5" X 6" X 12" USED BUT IN GOOD WORKING CONDITION NO RESERVE AUCTION STARTING@ ONLY.99 CENTS! COMES AS SHOWN* WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY R ETURN SHIPPING MUS T BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS ... moreAND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? F EEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951* PLEASE VISIT OUR STORE OFTEN TO VIEW A WIDE VARIETY OF INDUSTRIAL ITEMS. INVENTORY CHANGING DAILY. THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
NO 25 6X6X6 ANGLE PLATE MACHINIST RIGHT ANGLE JIG FIXTURE TOOLING MILL GRINDING
DESCRIPTION: USED. ANGLE PLATE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE ... moreSHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOLS OF ANY KIND; SH
SHAMROCK 8" x 4-1/2" x 5" HEAVY DUTY RIGHT ANGLE PLATE
Made in the USA by Shamrock. This is a Heavy Duty Right Angle Plate in good condition. SPECIFICATIONS: Wall Thicknesses(long side& short side) 1-1/8" 1-1/4" Overall Dimensions: 8" x 4-1/2" x 5" Comes exactly as shown in pictures. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14804f29910-0x10b-
NICE! HEAVY DUTY 12" x 5" x 8" RIGHT ANGLE PLATE
This is a Heavy Duty Right Angle Plate in GREAT condition. SPECIFICATIONS: Wall Thickness: 1-7/16" Overall Dimensions: 12" x 5" x 8" Comes exactly as shown in pictures. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-148122c3e2f-0xf8-
GRAND HEAVY DUTY RIGHT ANGLE PLATE 2-59/64" X 2-29/32" X 2-29/32
Made in the USA by Grand This is a Heavy Duty Right Angle Plate in good condition. SPECIFICATIONS: Wall Thicknesses: 31/64" 29/64" Overall Dimensions: L) 2-59/64" X(W) 2-29/32" X(H) 2-29/32 Comes exactly as shown in pictures.
RIGHT ANGLE PLATE 10-1/4 X 9-3/8 X 7-1/2
RIGHT ANGLE PLATE 10-1/4 X 9-3/8 X 7-1/2
RIGHT ANGLE PLATE 9X10X10
RIGHT ANGLE PLATE 9X10X10
7" x 6" x 5" HEAVY DUTY RIGHT ANGLE PLATE
7" x 6" x 5" HEAVY DUTY RIGHT ANGLE PLATE LONG: 4" WIDTH: 6" HIGH: 5"
CHALLENGE 8" x 6" x 6" HEAVY DUTY RIGHT ANGLE PLATE
Made by Challenge. This is a Heavy Duty Right Angle Plate in good condition. SPECIFICATIONS: Wall Thickness: 1" Overall Dimensions: 8" x 6" x 6" Comes exactly as shown in pictures.
Lego White Flat Left Plate 3X8 W/Angle + Flat Right Plate 3X8 W/Angle ~ Lot of 2
All Lego items are gently used. Although the vast majority are in like-new condition. There may be an occasional piece that shows more wear and tear. I have done my best to ensure that all pieces are Lego brand(as opposed to Mega Blocks) but it is possible that an occasional piece may slip through. Combined Shipping is always available for items placed in your cart before checking out- if in doubt, request an invoice prior to making payment.
NICE! TAFT-PEIRCE 12" x 10" x 9" HEAVY DUTY SLOTTED RIGHT ANGLE PLATE
Made in the USA Taft-Peirce. This is a Heavy Duty Slotted Right Angle Plate in GREAT condition. SPECIFICATIONS: Wall Thickness: 1-1/4" Overall Dimensions: 12" x 10" x 9" Comes exactly as shown in pictures.
SHAMROCK 8" x 6" x 6" HEAVY DUTY RIGHT ANGLE PLATE
Made by SHAMROCK This is a Heavy Duty Right Angle Plate in good condition. SPECIFICATIONS: Wall Thickness: 1-1/4" Overall Dimensions: 8" x 6" x 6" Comes exactly as shown in pictures.
Matthews Studio Right Angle Baby Plate w/ 4x6 Mounting Plate
Categories- Customer Service. Matthews Studio Right Angle Baby Plate w/ 4x6 Mounting Plate What's Included: Plate, Condition Rating: Functionality: Tested and working, Cosmetics: No significant issues or wear found. Notes: Metal plate measures 4" x 6" with 6 anchor points for screws or nails. PAYMENT We only accept payment by PayPal. SHIPPING We only ship to the address provided to us by Paypal. Many of our orders are shipped same-day. Orders are not shipped on Weekends or Holidays. Orders over $250 will require Signature for delivery. We do offer First Class shipping on some items. First Class does not have tracking. Is not guaranteed, and delivery times vary greatly. The buyer is responsible for any non-deliverable parcels. We will not declare a lower price or“gift” on Customs documents. Any import duties. Taxes or fees are ... morethe buyers responsibility. RETURNS/EXCHANGES We have a 14-Day Money-Back Guarantee on all of our items* To be working as described. Please contact us ASAP with any issues. We will do our best to resolve any errors in our listings. Items returned by buyers choice will be refunded less shipping expenses and a 15% restocking fee. If“Free Shipping” was offered. You will be charged for that shipping upon return. Items must be returned in the exact condition they were received. With all accessories and packaging. Items sold“AS-IS” have no guarantee and cannot be returned. INVENTORY We sell our equipment in both our retail stores and online. In rare cases. You may purchase something that recently sold in our retail stores. If this happens we will refund your complete payment as soon as we possibly can. We apologize for any inconvenience should this happen. © 2010-2012 gmcamera- all rights reserved
GRAND PRECISION RIGHT ANGLE PLATE - 5" L x 5" W x 5" H
Made in U.S.A by Grand This is a Precision Right Angle Plate in Good condition. Specifications: Finish: Precision. Dimensions: 5" x 5" x 5" Comes as shown in picture. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1486c982be2-0x106-
Thorlabs: AP90L - Large Precision Right Angle Plate (retail $115)
EXCELLENT CONDITION! Our AP90L(M) Large Right-Angle Plate is a heavy-duty mount. Capable of holding breadboards at 90° relative to an optical table's surface. This plate provides a generous array of 31 1/4"20(M6) tapped holes and six 1/4"20(M6) counterbores oriented at 90° from the optical table surface. Its base contains three 1/4"20(M6) clearance slots and six 1/4"20(M6) counterbored holes for mounting to an optical table.
Thorlabs AP90 Right-Angle Plate ( retail $75 ) ( 2 available )
EXCELLENT CONDITION! One-Piece Aluminum Construction for Excellent Rigidity, Angled Rear Support Structure Reinforces Mounted Optomechanics, Parallel and Perpendicular to Within 0.02" 0.05 mm) The AP90(M) Right-Angle Plate is an ideal solution for building sturdy three-dimensional optomechanical assemblies that require vertical positioning. This plate provides four 1/4"20(M6) clearance slots. Seven 1/4"20(M6) tapped holes, and two 1/4"20(M6) counterbores oriented at 90° from the optical table surface. Its base contains two 1.30" 34 mm) long, 1/4"20(M6) clearance slots and two 1/4"20(M6) counterbores for mounting to an optical table.
machinist toolblock angle right plate vintage
Machinist work holding block 4 1/4 wide 4 inches deep 3 inches tall weighs about 5 pounds has surface rust there is a LG etched in one end Have any question the 7 pictures don't answer. Please ask, thank you
Large Machinist Right Angle Plate 8 1/2" x 7 1/2" x 11 1/2"
looks good to me. As Is Call if you want to insure 812 663 6311