|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product description: ★ Our 10" hard chuck jacket consists of 3 pieces made of precision high-quality steel for precise performance. ★ For the first roughing, ... more20CrMnTi chuck, easy to replace and practical, precise performance. ★ Claw size: 101 x 40 x 54mm, groove width: 16mm, hole spacing: 30mm. Ideal for 10" lathe chucks. ★Applicable to 10" lathe chucks, precision quality serrated (1.5 mm x 60) Hard Jaws (Double Step). Product specifications: Material: 20CrMnTi Jaw Size/Diameter: 10" Slot width: 16mm (0.63") Pitch: 30mm (1.18") Serrated: 1.5mm x 60° Number of holes: 3 Steps: 2 Package size (length x width x height): 14.8*10.3*6.5cm Weight: 3kg The package includes: 3 x hard chuck jaw.
Buy It Now
$13.95 Shipping Condition: New Location: Diamond Bar, United States Mounted with 5C shank for convenient quick change in operation. Shank Size: 5C. All of our products are 100% inspected. Internal Jaw Clamping Range: 0.0787" ... more(2mm) -1.1811" (30mm). Internal Jaw Jamming Range: 1.1811" (30mm) - 3.5433" (90mm).
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
$5.40 Shipping Condition: New Location: Riverside, United States Chuck Jaws - Jaw Nut and Screws Chuck Size 8" inches - Part # KT-80JN lot of 6.
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States SHARS M14 12" x 3.937"HT Soft Steel Chuck Jaw Set for Kitagawa B12 NEW 202-6285. Jaw Mounting Type: 1.5mm x 60 Degree Serration, Lathe Chuck ... moreSize: 12" Groove Width: 0.710" 18 mm Screw Size: 14mm or 0.55" Hole Space: 1.181" 30mm, Jaw Height: 3.937" Jaw Width: 1.89" Jaw Length: 5.08" Hole to Front: 2.362" Point Angle: 120 Degree Material: 1045 steel Set: 3 pcs, For use on: Kitagawa. Samchully, Strong, MMK, SMW Autolock, Howa& Hitachi-Seiki Chucks. Compatible with: Kitagawa MMK Howa B-12 BT-12 HO-12 HOB-12 HOH-12 H-12 HA8-12 ZA8-12 ZJA8-12 HO15M12 HO22M10 HO24M10 HO27M10, Product features Made of steel 1045 hot roll which is stronger. Hardenable, easier to finish, and more fatigue resistant compared to 1018 cold roll. Hot roll will have less internal stress than cold roll and it will be more stable than cold roll after machining. Precision ground finish on teeth to provide a tight fit with the master jaw of the lathe chuck, Pointed jaw in 120 degree angle, Each jaw is stamped with a sequential number, Supplies maximum concentricity on finish turning operation, Can be bored or turned to customized workpiece, 3 pcs in a set, We have more CHUCK JAW available: We have more 3 Jaw or 6 Jaw LATHE CHUCKS available: All Available to Ship NOW! Fixed Prices at our eB ay store! Please direct any questions to our eBay Message Box. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box
Buy It Now
$150.00 Shipping Condition: Used Location: Clare, United States Model: 264FD6. Jaw Style: 4 Jaw Independent & Self-Centering. Adapter Plate: D1-6 Mount (missing camlock pins).
Buy It Now
$18.43 Shipping Condition: New – Open box Location: Venice, United States Jaw Interface Type Serrated. Jaw Shape Square. Industry Recycles. Number Of Jaws 3. Material Grade 6061-T6.
Buy It Now
$10.40 Shipping Condition: New – Open box Location: Highland, United States
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 3PCS 10" Hard Chuck Jaw Set for CNC Lathe Chucks Chuck Jacket 20CrMnTi Product description: ★ Our 10" hard chuck jacket consists of 3 pieces made of precision ... morehigh-quality steel for precise performance. ★ For the first roughing, 20CrMnTi chuck, easy to replace and practical, precise performance. ★ Claw size: 101 x 40 x 54mm, groove width: 16mm, hole spacing: 30mm. Ideal for 10" lathe chucks. ★Applicable to 10" lathe chucks, precision quality serrated (1.5 mm x 60) Hard Jaws (Double Step). Product specifications: Material: 20CrMnTi Jaw Size/Diameter: 10" Slot width: 16mm (0.63") Pitch: 30mm (1.18") Serrated: 1.5mm x 60° Number of holes: 3 Steps: 2 Package size (length x width x height): 14.8*10.3*6.5cm Weight: 3kg The package includes: 3 x hard chuck jaw .
Buy It Now
$18.00 Shipping Condition: Used Location: Unionville, United States NEW ATLAS CRAFTSMAN 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD NEW Click to Enlarge NEW QUALITY IMPORT ATLAS CRAFTSMAN 101 6 INCH LATHE 4 ... moreINCH 3 JAW SELF CENTERING LATHE CHUCK WITH KEY AND REVERSE JAWS. 1-8 BACKING PLATE FOR THE OLDER ATLAS CRAFTSMAN LATHES.THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Free Shipping Condition: New Location: China Power :Manual.
Buy It Now
$87.34 Shipping Condition: Used Location: Clover, United States NEW, old inventory. • Local pick up. USED, but in good working condition. USED, SOLD AS IS. If your item is received in a different condition than stated ... more(DOA, not working properly etc. NEW, no box. ).
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreOur products are manufactured in an ISO-9001 certified facility.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Product description: ★ Our 8" hard chuck jacket consists of 3 pieces made of precision high-quality steel for precise performance. ★ For the first roughing, ... more20CrMnTi chuck, easy to replace and practical, precise performance. ★ Claw size: 87 x 35 x 51mm, groove width: 14mm, hole spacing: 25mm. Ideal for 8" lathe chucks. ★Applicable to 8" lathe chucks, precision quality serrated (1.5 mm x 60) Hard Jaws (Double Step). Product specifications: Material: 20CrMnTi Jaw Size/Diameter: 8" Slot width: 14mm (0.55") Pitch: 25mm (0.98") Serrated: 1.5mm x 60° Number of holes: 3 Steps: 2 Package size (length x width x height): 13.3*9.2*6.2cm Weight: 2kg The package includes: 3 x hard chuck jaw.
Buy It Now
$9.00 Shipping Condition: New Location: Chino, United States OT-WMT-410 Description This three-jaw chuck is widely used in most of the lathes on the market. It has high wear resistance, high quality, fine workmanship, ... moreand a large clamping range. It can be praised as the fine product of lathe accessories. Key Features High Wear Resistance: It uses stainless steel, so it is more durable and wear-resistant than the palstic material. High-quality Material: It uses high-strength steel, clamping with strength and it is not slippery, so it will improve work efficiency. Large Clamping Range: The jaws can be adjusted at will to fit a wide range of blank sizes. Great Accuracy: The workmanship is demanding. We used the latest technology to manufacture this product, so the workmanship is more refined. We will work on every millimeter to ensur.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Applicable Chucks - Samchully, Auto Strong, MMK, Nikko, Howa, Sugo. Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard ... moreJaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
$25.00 Shipping Condition: New Location: Glendora, United States
Buy It Now
$12.30 Shipping Condition: Used Location: Tulsa, United States
Buy It Now
$28.82 Shipping Condition: New Location: Saint Charles, United States We carry high quality live centers, with individual certificate in each product. 6" Threaded Back Plate with 2-1/4 x 8 TPI for 3 or 6 Jaw Zero Set Adjustable ... moreLathe Chuck Lathe Chuck Adapter Plate 6" D1-6 Finished Machined for Zero-Set Lathe Chuck Lathe Chuck Adapter Plate 6" D1-4 Finished Machined for Zero-Set Lathe Chuck.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreOur products are manufactured in an ISO-9001 certified facility.
Buy It Now
Free Shipping Condition: New Location: Winder, United States
Buy It Now
Free Shipping Condition: New Location: United States Model: Z011A. Chuck Type: 4-jaw chuck. Material: Zinc alloy. High quality 4-jaw chuck has been widely applied. If you do not receive our reply within ... more48 hours, pls. If you are satisfied with our service, pls.
Buy It Now
Free Shipping Condition: New – Open box Location: Ogden, United States Item may have minor scratches, scuffs, or dings. Item includes only what is pictured. All part numbers are also pictured. Any re-manufactured labels will ... morebe included in the pictures.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. It features a wide clamping range and high precision. After fastened by a single T handle, it can handle more objects than a 3-jaw ... moreone, in various shapes. The lathe chuck is made of high-quality cast iron materials, rust and corrosion resistance.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States 65 mm/3 Jaws Self Centering Chuck with Back Plate And T-nuts Tool. High Quality Precision ER16 Collet Adapter. Concentric run out within 5 microns. 65 ... moremm/3 Jaws Self Centering Chuck : -. Suits our 3" (75 mm)/ 4" (100 mm) Rotary Table.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreType -Pointed. Lathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
$29.30 Shipping Condition: Used Location: Petersburg, United States Sold as shown, Used as shown, Cushman and other parts, you get everything pictured.
Buy It Now
$25.00 Shipping Condition: For parts or not working Location: Sterling Heights, United States A USED 6 INCH BUCK ADJUST TRU 6 INCH 3 JAW WITH TOP REVERSABLE JAWS WITH OUT A BACKPLATE with a BUCK CHUCK KEY WITH THE ALLEN ADJUSTER HANDLE
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 8" Lathe Chuck. Chuck Thickness: 2.963". Back Mounting: D1-4. Hardened And Ground. High Quality Steel. Input Torque: 100 Nm.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States 3 Jaw Self Centering Chuck 50mm Dia M12X1 Threaded. Threaded M12x1. 50mm Self Centering Chuck 3 Jaw. Bluefox Tools comprises of a dedicated and skilled ... moreteam of engineers with an aim of providing you tools of highest indian industrial standards.
Buy It Now
$20.00 Shipping Condition: Used Location: Sidney, United States Cushman 8" 3 Jaw Schroll Lathe Chuck with D1-6 mount Mount only has 2 pins as shown in photos. No outside jaws This item is in good used condition ... moreand fully functional. This item will ship Flat Rate Priority Mail
Buy It Now
$17.10 Shipping Condition: Used Location: Joliet, United States This is a used 5" diameter three jaw Westcott self centering lathe chuck with 1.5" x 8 thread center hole. It will mount to my Atlas 10" ... morelathe and jaws operate smoothly. The chuck includes both sets of numbered jaws and the chuck key. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: Used Location: Shenandoah, United States
Buy It Now
Free Shipping Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
$19.95 Shipping Condition: New Location: Diamond Bar, United States The chuck plate is designed for supporting work pieces during process to be fitted for standard 3" 3-jaw self centering lathe chuck. About the 3" 3-Jaw ... moreSelf Centering Lathe Chuck Internal Jaw Clamping Range: 0.0787" (2mm) -0.8661" (22mm).
Buy It Now
Free Shipping Condition: Used Location: North Grosvenordale, United States 1 jaw has the screw hole broken as shown.
Buy It Now
$10.75 Shipping Condition: Used Location: Queen Creek, United States Images are of actual item you will receive.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Back Mounting: D1-4. Hardened And Ground.
Buy It Now
Free Shipping Condition: Used Location: Point Pleasant Beach, United States I recently obtained metal lathe related tools and accessories which I will be listing in several auctions. Items include several sets of chuck jaws. Steady ... morerest, tool cutting bits, tool holders, live and dead centers and a vise. These are all for small to mid size lathes. I do not know the make of lathes these items originally came from, many items can fit a variety of different lathes. These items are all used in useable condition showing normal wear and usage. I can combine shipping on most of these items and due to weight I will use USPS flat rate priority boxes to ship if this is the cheapest and items will fit. View photos and measurements provided for condition and to see if items meet your needs. This listing is for the following: This listing is for(6) three jaw sets(18 jaws) for a metal lathe chuck plus several other items. Five of these sets have similar measurements. Approx. 2 1/4” long, 1” wide and 1 1/8” high with 2 mounting holes and a 1/2” wide slot on base. Three sets of jaws look like they held threaded bolts, but these can be r-cut to fit your needs. The sixth set of jaws is made with gripping/ clamping teeth. There are 6 other items included in lot that look like mini jaws, but I’m not certain what they are. This lot sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this lot, make a bid. This lot ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reaso
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Number Of Jaws Included Self Centering. Chuck Type 6-Jaw Chuck. Plain Back Mounting. High Quality Steel, Hardened And Ground. 0.003" TIR.
Buy It Now
$24.00 Shipping Condition: New – Open box Location: Greenwood, United States This is a brand new Shop Fox#D3609 heavy duty 6" diameter x 3-Jaw Self Centering Metal Lathe Chuck with a plain back. This beautiful chuck has the ... morefollowing specifications: Body is 6.3" 160mm) in diameter x 2.6" 65mm) thick(jaws project 1.14" out from body) The thru hole is 1.77" 45mm) Includes(3) Inside jaws. 3) outside jaws, large safety chuck key, 3) 8mm mounting bolts, Allen wrench Smallest diameter gripped by jaws =.118" 3mm) Largest diameter gripped by jaws = 5.709" 145mm) Run-out of chuck body =.0033" 085mm) Run-out of test bar in jaws =.0063" 160mm) This is a plain back chuck. But it has(3) 8mm threaded holes on the outer ring in a 142mm dia bolt hole circle.positioned 120 degrees apart. Please email if you have any questions. It will be up to the buyer to determine if this chuck will fit your lathe.we do not have a way of determining this for you. WE DO NOT CARRY BACK PLATES TO FIT THIS CHUCK. If you need an accurate. Heavy duty, self centering chuck at an affordable price, this high quality imported chuck will fill the bill. We carry the following metal lathe chucks: 4" x 3-Jaw Simultaneous. 5" x 3-Jaw Simultaneous. 6" x 3-Jaw Simultaneous 6" x 4-Jaw Independent. 8" x 3-Jaw Simultaneous. 8" x 4-Jaw Independent Please email for details and prices. You are welcome to email with any questions. And thanks for viewing. Try searching our ebay store for hundreds of additional tool values. FAST SHIPPING INCLUDED in the USA. International buyers should email for shipping quote before buying. Shipping weight is 20 lbs.
Buy It Now
$13.00 Shipping Condition: Used Location: Coffeyville, United States PART NO. 8537. OAL 2-5/8". COMPATIABLE DEVICES LATHE.
Buy It Now
$13.99 Shipping Condition: Used Location: Middlebury, United States Will there be a dock or forklift. Warehouse Location: M2322. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a ... morefreight quote we will need to know the following.
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India 70MM LOCATING RECESS. INTERNAL / EXTERNAL JAWS ARE INCLUDED. SELF CENTERING 4 JAW LATHE CHUCK. OVERALL HEIGHT INCLUDING JAWS 65MM. THIS CHUCK IS FRONT ... moreMOUNT WHICH MAKES FITTING A BACK PLATE MORE STRAIGHT FORWARD.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 3 Jaw Self Centering Lathe Chuck. Center Hole: 1.18". Small Freight Item. Runout: 0.003".
Buy It Now
$116.65 Shipping Condition: New – Open box Location: East Aurora, United States 6 Chuck Bolts. 1 Chuck wrench with handle.
Buy It Now
$3.99 Shipping Condition: New Location: Pocahontas, United States FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. 80mm / 3.15in. Included Components: Lathe ... moreChuck, Hex Wrench. Compatible Devices: Lathe. Included Components: Lathe Chuck, Hex Wrench.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States 1 Lathe Chuck. Internal Jaw Clamping Range External Jaw Clamping Range Chuck Size Chuck Body Material 1 Chuck T Wrench. Unit Dim L x W x H (in) 4 Socket ... moreHead Screws.
Buy It Now
Free Shipping Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
$71.52 Shipping Condition: Used Location: Frankfort, United States Thread is left-hand, as you'd expect. Two-piece jaws look great. 1.65" Through-Hole.
Buy It Now
Free Shipping Condition: New – Open box Location: Ponca City, United States New, No Box.
Buy It Now
$12.45 Shipping Condition: New – Open box Location: Denver, United States Sherline 3.1" 4 Jaw Independent Chuck 3/4-16 TPI Mount For Lathe/Mill USA 🇺🇸 I purchased this chuck from Sheline a number of years ago and never actually ... morehad a situation where I needed to use it, so therefore it has never been used. But it does show some very minor surface corrosion from sitting in a cardboard box all these years see photos. Also the Sheline brand tee handled wrench that I am including does show some wear because that is the one I used with the lathe, but I thought I include it with this chuck. Also, the four jaw chuck operates very smoothly. Just like the day I bought it.Made in USA 🇺🇸
Buy It Now
Free Shipping Condition: New Location: United States Bison Soft Top Jaws for 8" Scroll Chuck, 1pc, 7-884-308. Fits Bison Chuck Series 32 , 35 , 36 , 37 . Chuck Type Scroll. Type Soft Jaws.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ★Applicable to 8" Lathe Chucks, Precision Quality Serrated (1.5 Mm X 60) Hard Jaws (Double Step). ★ Claw Size: 87 X 35 X 51mm, Groove Width: 14mm, Hole ... moreSpacing: 25mm. Ideal for 8" Lathe Chucks. 3 X Hard Chuck Jaw.
Buy It Now
$17.60 Shipping Condition: Used Location: Middletown, United States
|
|
|
|
ARMATURE CHUCK, JACOBS BRASS JAWS
FOR SALE: A ARMATURE CHUCK WITH BRASS JAWS JACOBS WITH 1 MORSE TAPER AND#2 ADAPTER SLEEVE 1/4" TO 3/4" JAW OPENING EXCELLENT USED CONDITION
|
|
|
Cushman 10" 3 jaw chuck D1-6 mount. 2-1/4" hole 2 piece jaws for engine lathe
For sale is one used Cushman chuck. Ref. 10236D6. Dia- 10" 3 jaw. 2 piece reversible jaws. Hole through- 2-1/4" Thickness- 3-1/4" Spindle mount- D1-6. Good condition. Buyer to pay shipping charge. Sold in the as is condition. Email with any questions. See terms. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal. Bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period. The item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) Allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in ... morefull. Texas residents will pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer. We, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes. Duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever. Expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the buy
|
|
|
Cushman 15" 3 jaw chuck D1-8 mount 3-1/4" hole 2 piece jaws for engine lathe
For sale is one used Cushman chuck. Dia- 15" 3 jaw. 2 piece reversible jaws. Hole through- 3-1/4" Thickness- 3-3/4" Spindle mount- D1-8. Good condition. Buyer to pay shipping charge. Sold in the as is condition. Email with any questions. See terms. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal. Bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period. The item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) Allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in full. Texas ... moreresidents will pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer. We, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes. Duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever. Expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the buyer's respo
|
|
|
Hard Jaws for a manual 10" Chuck Reversible Set of 3- Mounting Holes= 1/2 Inch
This auction is for hard jaws for a 10" chuck(set of 3) These are in good condition. Used with a 10" chuck. Please email me with any?s. Thanks for looking. Posted with
|
|
|
4 Jaw 6" Chuck 3-1/4" Hub X 1-1/2" Thru Hole, Screws Tight, Jaws Excellent
Brief History on some of my items I will be listing. I have been in the Cutting Tool Business for almost 40 years. I will be listing many items and Machines related to Cutting Tool Sharpening and Manufacturing. These will be great for a Start up Company or one already in the business. Also if you have a particular need for an item let me know I may have it. Many items are either no longer needed for the ongoing operations of my Business or could be Duplicates. Here is another 4 Jaw 6" Chuck 3-1/4" Hub X 1-1/2" Thru Hole. Screws Tight, Jaws Excellent All shipments outside the USA will have to Have Insurance and Tracking added to the Shipping Costs. Please wait for me to Invoice you.
|
|
|
Emco Compact 8, 110 mm 4 Jaw Chuck w/ Internal Jaws & Key, Self centering
Description: Emco Compact 8 Four Jaw Chuck. 110 mm diameter with chuck key. Requires 3 mounting studs. Washers and bolts for DIN mount on Compact 8 spindle nose. Non-Emco Chuck key is a perfect fit. Condition: Excellent or better mechanical condition. Some minor cosmetic flaws/ dents. Probably never used. Some oil and oxidation stains from age and lack of use. Notes: This is an extremely rare and expensive chuck. THE JAWS OF THIS SUPERB CHUCK MUST BE GROUND IN YOUR LATHE AFTER INSTALLATION. Otherwise. You're just wasting your money. Listing Data Verified By: Chuck N. Stein. PH.D. Shipping: Includes professional packaging and shipping flat rate to the Continental US ONLY. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds ... moreto clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a Paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
JACOBS #36 3/16-3/4 DRILL CHUCK NEW JAWS MADE IN USA ARBOR INCLUDED
CHUCH HAS BEEN TAKEN APART. CLEANED LUBRICATED AND NEW JAWS INSTALLED, READY TO GO.
|
|
|
3 Jaw Self Centering 5" Lathe Chuck, Made in Austria, w/both Sets of Jaws & Key
Description: 5" Diameter. 3 Jaw Lathe Chuck, Made in Austria. With chuck key and both sets(external and internal) of numbered jaws. Has matched 2-1/4" x 8 tpi threaded back plate. Purportedly used on a South Bend lathe. Condition: This looks like a very well made chuck. The back plate. Chuck, and all jaws have serial numbers 9159. The chuck key action and jaws sets all work very smoothly. The Bad: The logo disc has been removed so I don't know the source of manufacture. The chuck bumped against a lot of other tooling so the surface is dented and scratched throughout. The metal has unattractive oxidation stains in spots Notes: If this chuck actually fit my lathe spindle I would have kept it. I planned to take it apart. Surface grind the entire exterior surface, reassemble it and then grind the jaws. I've had real good luck ... morewith EU produced older chucks. THE JAWS OF THIS CHUCK SHOULD BE GROUND IN YOUR LATHE AFTER INSTALLATION. Otherwise. You're just wasting your money. Listing Data Verified By: Chuck N. Stein. PH.D. Shipping: Includes professional packaging and shipping flat rate to the Continental US ONLY. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a Paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think
|
|
|
LOT OF 3 SETS SOFT JAWS FOR AMERICAN STANDARD TONGUE & GROOVE 6" CHUCK
Lot of 3 Sets Soft Jaws for 6" 6-1/4" Chuck American Standard Tongue& Groove 6" Chuck Jaw Lot Includes: Dillon Model 201459P 2-7/8" L x 1-5/8" H x 1-1/4" W Jergens Model 15205 2-5/8" L x 1-1/4" H x 1-1/4" W 6-1/4" Chuck Jaws Include: 3-1/16" L x 1-1/2" H x 1-9/16" W No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru ... moreSaturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
15 INCH PUTNAM LATHE CHUCK PLAIN BACK THREE JAW WITH TWO PEICE JAWS
PUTNAM LATHE CHUCK MADE IN POLAND 15 5/8 OD LARGE BORE PLAIN BACK FOR MOUNTING ON MOST ANY LATHES OR FIXTURE HARDNED STEEL BODY TWO PEICE JAWS VERY SMOOTH AND REPEATABLE STOP BUYING CHEAP CHINA CHUCK PUTNAM BISON BUCK PB IS ALL YOU WILL EVER NEED NO RESERVE AUCTION WILL SHIP WORLD WIDE FEEL FREE TO CALL 248 875 2089 COMBINED SHIPPING AND LOCAL PICK UP ALWAYS WELCOME SO PLEASE SEE MY OTHER ITEMS THANKS DAVE ROCHESTER TOOL
|
|
|
Bison 6" 3-Jaw Self-Centering Lathe Chuck, L0 Mount, 2-Piece Jaws, 7-804-0642
Bison Self-Centering Lathe Chuck Model 7-804-0642 Free Shipping UPS Ground Chuck Type Self-Centering, Nominal Chuck Size 6, Number of Jaws 3, Adjustable(Yes/No) No, Mount L-0, Through-Hole Diameter(Decimal Inch) 1.6535, Body Material Cast Iron, Number of Jaw Pieces Two-Piece, Reversible(Yes/No) Yes, Chuck Diameter(Inch) 6-1/4, Minimum Jaw Capacity(Decimal Inch) 0.1180, Maximum Jaw Capacity(Decimal Inch) 5.7500, Axial Runout(Decimal Inch) 0.0008, Radial Runout(Decimal Inch) 0.0012, Body Length(Decimal Inch) 4.4488, Maximum RPM 3000, Includes Two-Piece Jaws, Location: Cart 2) 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1458148e50d-0x106-
|
|
|
Buck Chuck 4"- 3 Jaw Precision Adjust- Tru. With Inside & Outside Jaws
Chuck is in perfect working condition. Accurate with adjustment Within.0002. Has a mounting plate 1.562 which can be turned Down to 1.375 or completely removed Posted with
|
|
|
hard jaws for 10 or 12" power chuck. 90 deg serrations
Used hard jaws for power chuck. 90 deg serrations. Good condition. Very little use. Sold as is g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1458f1d8b9d-0x105-
|
|
|
Skand Chuck Fabriks 8" lathe chuck 2 jaw 2pc. jaws
Selling a Chuck for a metal lathe. We lubricated it and confirmed that all jaws adjust properly from totally closed to totally open. In good condition. Please see below for the mounting and other specifications: Manufacturer: Skand Chuck Fabriks Mount type: Appears it was being chucked up by another chuck Jaws: 2 Diameter: 8" diameter thru bore: JAWS INLCUDED: Yes. 2 piece jaws Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. THIS ITEM WILL BE WELL PACKAGED AND SHIPPED VIA UPS. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
3" 4 jaws lathe chuck 3/4-16 back hole sherline taig
This is an independent 4 jaws chuck with a 3/4-16 back hole and the diameter is 3" An independent chuck which four jaws can be move or adjust separately, this chuck is a used item but in a very good condition. All jaws and threads are very good no dent or chips,Thanks g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-1459e391cba-0x107-
|
|
|
12" 3 JAW CHUCK MANUAL/POWER - MODIFIED JAWS
WISCONSIN METALWORKING MACHINERY INC. CHUCK SPECIFICATIONS: DIAMETER: 12" NO. JAWS: 3 MOUNT-AMERICAN STANDARD. B2-8? EQUIPPED WITH: TUBE TEMPORARY SPECIFICATIONS SUBJECT TO VERIFICATION CONDITIONS OF SALE TERMS: Cash. Check. Pay Pal, or wire transfer with order. Unless otherwise stated. Payment prior to shipping. WARRANTY: The goods described herein are preowned used goods and are offered“as is” where is” unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. All specifications and description of said goods are approximate only. It is the Buyers responsibility to inspect the goods and ascertain if the specifications. Description and condition of the goods conform to Buyer’s requirements. MACHINE USE AND SAFETY: Buyer acknowledges ... morethat the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller. Nor has the Seller knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s(user’s) responsibility to provide proper safety devices. Equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.
|
|
|
Cushman 3-jaw 12" dia CNC lathe chuck, A-8 spindle mount, Acme serrated jaws
Here is a Cushman 12" diameter 3-jaw CNC lathe chuck. It has an A-8 spindle mount. It looks virtually unused but has some minor rust from storage prior to my purchase. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1459f966c44-0x10d-
|
|
|
Hardinge Model 30AHC 3 Jaw Chuck, Xtra Jaws, Wrench, FREE SHIPPING!
Hardinge Model 30AHC 5" Three Jaw Chuck Comes with additional set of Jaws and wrench Please review photos(they are accurate and current) for details. Free Shipping USPS Priority Mail CONUS ONLY No Returns Accepted.
|
|
|
12-1/2" Universal 3 Jaw Chuck w/ Removable Top Jaws Made in Poland -- Bison??
12-1/2" Universal 3 Jaw Chuck w/ Removable Top Jaws Made in Poland- Bison? Click to View Image Album Click to View Image Album Click to View Image Album Clean lightly used Bison flat back 12-1/2" 3 jaw metal lathe chuck with removable top jaws. Complete with 1/2"13 SHCS& chuck wrench. Unit weighs 116# so I would prefer local P-U or motor freight but am listing it as UPS shippable but with a $25.00 crating fee. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter ... moreservice rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn
|
|
|
SMW AUTOBLOK 400 MM POWER CHUCK W/CYLINDER, QUICK CHANGE JAWS
This is for a used. But very good condition, SMW Autoblok quick change jaw power chuck, model# KNCS-NB-400-128, 15 3/4" dia. Has tongue and groove master jaws. 315" stroke per jaw, chuck is rated at 2750 RPM. Also included is a SMW hydraulic cylinder, and draw tube, I cannot see the number on the cylinder as it is up on a shelf and hard to get at at this time. Local pickup in Worcester, MA 01545. Thanks for looking and check out my other Ebay auctions! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-145ba184c19-0x10d-
|
|
|
4 Sets, 2" Wide,Extra High New Alum. Jaws for 6" Northfield Chuck A-0917
You are bidding on NEW Aluminum Jaws for 6" Northfield Chuck Specifications NEW! Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business. And you later find that it is damaged, take pictures and notify the carrier. If ... moreyou are pleased with our service please leave positive feedback. Thank you. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palatalizing: Some buyer's need to use a freight company requiring the item to be crated or palatalized. If this is required, we quote crating or palatalizing separately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping. Upon arrival of your machine. Unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a c
|
|
|
South Bend Lathe Works 7-1/2" Skinner Chuck. Reversible Jaws!! NO RESERVE!!
Up for auction is a 7-1/2" south bend lathe works skinner chuck. Jaws are reversible and in good condition. I exercised the jaws and they tested good. Comes with a threaded back plate. It measured 1-3/4-8TPI. PLEASE ASK QUESTIONS BEFORE BIDDING! Thank you.
|
|
|
BISON 10" 4-Jaw, Lathe Chuck, Hardened 2-pc Reverable Jaws, A1-8 Taper
NO RESERVE THIS auction for 1-pc used: BISON 10" 4-Jaw. Lathe Chuck, Hardened 2-pc Reverable Jaws, A1-8 Taper. 5-1/2" taper, 6-3/4" bolt pattern. 2-9/16" thru hole. looks to have been Balanced. Includes wrench. good used condition Fast $15.00 priority mail shipping! Postal money orders& company checks always welcome! You get What you see! Local pick-ups are always welcome(no charge) May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome ... moreif not as described!
|
|
|
L95 - LOT OF 4 SETS OF CHUCK JAWS FOR LATHE ENGINE TOOL POST
SIGN UP FOR OUR NEWS LETTER TO RECEIVE EMAILS ON OUR NO RESERVE AUCTIONS LOT OF 4 SETS OF CHUCK JAWS Shipping is Only $20 Anywhere in the USA This can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other HEAVY EQUIPMENT. MACHINERY, INDUSTRIAL EQUIP/PARTS PLUS MUCH MORE on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check
|
|
|
Pratt Bernard 10" 3 Jaw Chuck 2 piece jaws rev. 2-7/8" Hole, L-1 Mount lathe
For sale is one used Pratt Bernard ref. 273-32515. Chuck Dia. 10" 3 jaw(two piece reversible jaws) Hole through- 2-7/8" Thickness- 4" Spindle mount- L-1. Less top jaws Good condition. Buyer to pay shipping charges. Sold in the as is condition. Email with any questions. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal, bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period, the item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received ... morein full. Texas residents will pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer, we, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes, duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever, expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is
|
|
|
UNION 10" 4 Jaw Chuck solid jaws rev. 2-3/4" Hole, L-1 Mount lathe
For sale is one used UNION Chuck ref. 56310L-1 Dia. 10" 4 jaw(solid reversible jaws) Hole through- 2-3/4" Thickness- 4" Spindle mount- L-1. Good condition. Buyer to pay shipping charges. Sold in the as is condition. Email with any questions. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal, bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period, the item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in full. Texas residents ... morewill pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer, we, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes, duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever, expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the buyer's responsibili
|
|
|
BISON 8" 3 Jaw Chuck 2 piece jaws rev. 2-1/4" Hole, L-1 Mount lathes lathe
For sale is one used BISON Chuck Dia. 8" 3 jaw(two piece reversible jaws) Hole through- 2-1/4" Thickness- 3-3/4" Spindle mount- L-1. Good condition. Buyer to pay shipping charges. Sold in the as is condition. Email with any questions. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal, bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period, the item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received in full. Texas residents will ... morepay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer, we, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes, duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever, expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the buyer's responsibility to i
|
|
|
UNION 8" 3 Jaw Chuck 2 piece jaws rev. 2" Hole, L-1 Mount lathes lathe
For sale is one used Union Chuck ref. 36303 L-1. Dia. 8" 3 jaw(two piece reversible jaws) Hole through- 2-1/8" Thickness- 3-1/4" Spindle mount- L-1. Less top jaws. Good condition. Buyer to pay shipping charges. Sold in the as is condition. Email with any questions. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal, bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If payment is not received within the 5 day period, the item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does not pass to buyer until payment is received ... morein full. Texas residents will pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer, we, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes, duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever, expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the
|
|
|
HARDINGE USED REPLACEMENT INSIDE JAWS for 3-JAW CHUCK
HARDINGE USED REPLACEMENT INSIDE JAWS for 3-JAW CHUCK. The used set of jaws are each stamped with the number"210" and the letter"A" in the groove. Used. Show signs of use.
|
|
|
4" Union Lathe Chuck w/ Reversible Jaws for Minilathe, Seig, etc.
Union 4" 3 Jaw Chuck w/ Reversible Top Jaws This is a used Union 4" 3 Jaw Chuck with reversible top jaws. It's in great shape and has just be cleaned and lubed. It can be front or back mounted. The top jaws are tongue and groove just like any other chuck. Use soft jaws for special workpieces. Key is included. Included in this auction: 1- Union 4" 3 Jaw Chuck. As pictured above. Click a picture for a better view. The linked photos are large(~200kb) So you see exactly what you are buying. Please ask all questions prior to the last 24 hours of the auction. View my other RC related items. Terms: Shipping cost is the responsibility of the buyer. The shipping cost is determined with the calculator provided in the auction. If you are bidding on other items please contact me if you are waiting for auctions to end to make payment. ... moreI allow up to 30 days for this. Ebay checkout will handle all of the items at once when you are ready. If you bid on multiple items and the shipping cost seems excessive please request an invoice with revised shipping. I try to set my shipping rules to combine shipping automatically. But it doesn't seem to work every time. If you choose shipping without insurance or media mail shipping for a book. The post office is responsible for delivering it to you intact. I deliver it to the post office in the condition it is listed here. I have been shipping items all over the world via post for over ten years and have never lost anything and only one or two instances of delay or damage. I am confident you will receive your items. Attention International Buyers! If First Class Air Mail is chosen there is no tracking or insurance available. Express Mail(EMS) is the best. But most expensive. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
6" westcott chuck southbend 10" lathe 2 1/4" & 1 1/2 " x8 2 sets jaws & wrench
1 nice Westcott 6" chuck. comes with the both jaw sets and wrench. all jaws are numbered for this chuck. from a south bend lathe with the 2 1/4"x8 headstock. has an inner thread 1 1/2"x8. the chuck looks great and works great. ready to turn. the rust is just surface and will look great if turned and polished with fine grit. wish I could use it but my lathe is a cam lock.
|
|
|
SET of 4 FACE PLATE or FIXTURE CHUCK JAWS vtl turret lathe mill milling table
set of good used face plate chuck jaws mfg not marked approx 2 3/8" x 2 1/2" x 5 1/2" please check my other auctions and happy bidding!
|
|
|
Set of Outside Jaws for Cushman Lathe Chuck,South bend, Logan, Atlas, Clausing
Excellent Set of Matched Outside Jaws for 3 Jaw Cushman Chuck Stamped with#5 and letters CCCO on end and#612C and CCCO in grooves. 2 5/8" long, 3/4" wide, slots are.308" wide and.148" deep, 5 threads per inch, looks new. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
|
|
|
5 Sets of 10 Inch Pie Chuck Aluminum Jaws
10 Inch Aluminum Chuck Jaws 5 sets Great shape. Ready to use Buyer pays for shipping dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-146287c0994-0x109-
|
|
|
LOT OF 3 SETS SOFT JAWS FOR AMERICAN STANDARD TONGUE & GROOVE 8" CHUCK 4
Lot of 3 Sets Soft Jaws for 8" Chuck American Standard Tongue& Groove Lot Includes: AJAX Model ASM 8 3-1/8" L x 1-1/2" H x 1-1/4" W Jergens Model 15217 3-1/2" L x 1-1/8" H x 1-1/4" W Huron Model 8MSH0P 3-1/2" L x 1-7/8" H x 1-1/4" W No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after ... morepayment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
5" BURNERED 3 JAW CHUCK D1-3 MOUNT BOTH ID + OD JAWS GOOD CONDITION.
5" BURNERED 3 JAW CHUCK D1-3 MOUNT BOTH ID + OD JAWS GOOD CONDITION. 5" BURNERED 3-JAW CHUCK BOTH SETS JAWS. INTEGRAL D1-3 MOUNT. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Craftsman Metal Lathe 4" Chuck 4 Jaw 1" by 8 TPI 111 21380 Reversible Jaws Sears
Craftsman Metal Lathe 4" Chuck 4 Jaw 1" by 8 TPI Threads 111.21380 Reversible Inside Outside Jaws Sears Atlas The Craftsman chuck is in fine condition with some wear. The threads are in fine condition. Comes with reversible inside/outside jaws. 1" x 8 threads per inch. See pictures. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays for $12.00 for USPS Priority Mail shipp ing with Delivery Confirmation. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
AJAX SER 11 CNC Lathe Chuck Jaws Fits Gamet 10" Power Chuck
AJAX SER 11 CNC Lathe Chuck Jaws Fits Gamet 10" Power Chuck SPECIFICATION Bullseye Catalog# 49957 Brand: AJAX, Model: SER 11, Weight: 9 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish ... moreto inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click
|
|
|
143 Hard Jaws That fit Gamet 10" Power Chuck
143 Hard Jaws That fit Gamet 10" Power Chuck SPECIFICATION Bullseye Catalog# 49958 Model: 143, Weight: 7 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA ... moreSALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD TO C
|
|
|
Vintage Craftsman 111.21380 Four Inch Lathe Chuck Four Independent Jaws Wrench
I picked up an entire lathe at a garage sale in our neighborhood from a nice older guy who claimed that he inherited this in the early 1970's and never used it. It makes sense. He had a huge barn/shop and was certainly comfortable around tools, but it was clear that his focus was old cars. But I guess that forty years of storing this had finally taken its toll and he was ready to free up some space. I will be listing the entire thing over the next few days. This also was found in a drawer in another part of the shop-so it was not with the lathe directly. Nice shape. Threads are one inch by eight teeth per inch right hand. Jaws move independently. Wrench included. This looks like it will fit nicely into a medium flat rate box. Happy to combine shipping. But in this case, if that means that the total of items will no longer fit into a flat ... morerate box the shipping might actually be higher. Actual shipping costs only. No hidden charges or other nonsense.
|
|
|
SKINNER 5" 4 JAW CHUCK INTEGRAL HARDINGE TAPER MOUNT REV JAWS ***VGC***
SKINNER 5" 4 JAW CHUCK INTEGRAL HARDINGE TAPER MOUNT REV JAWS*VGC* SKINNER 5" 4 JAW CHUCK WITH HARDINGE TAPER MOUNT. REVERSING JAWS. VERY GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
14" 4-Jaw, Plain Back, Reversable hard jaws, Lathe Chuck, 7-1/4" mount bore
NO RESERVE THIS auction for 1-pc used: 14" 4-Jaw. Plain Back, Reversable hard jaws, Lathe Chuck, 7-1/4" mount bore. 7-1/4" mounting bore, approx. 3" thru hole, includes wrench. Dispite the used condition(and age) jaws don't seem too bad for play, i f it's not a daily user but for that occasional big job, this might be the chuck for you. used condition Shipping weight 98-lbs UPS Postal money orders& company checks always welcome! You get What you see! Local pick-ups are always welcome(no charge) May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money ... moreif its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
|
|
|
Reversing Jaws for Atlas South Bend Logan Metal Lathe 3 Jaw Chuck
You are looking at a very good condition and ready to use set or reverse jaws for a 3 jaw metal lathe chuck. They are. As you can see in the pictures, in overall very good condition. Total length of each is about 1.412" max width is about.457" narrowest width is about.231" The notch is about.2" from the bottom up and is about.18" wide. I am not sure but I think these originally came with an Atlas Lathe chuck. Please check your dimensions to see if they will work with your chuck. You can see in the pictures that they have minor nicks and scratches but they are still very strong and solid. The ruler pictured is not included. If you have any questions please ask before bidding. I will ship to continental US only(will also send to Alaska and Hawaii if using USPS) If you are interested in and are the winning bidder on ... moreother items I have for auction. And they are going together to the same address, I will gladly combine shipping to save you money. Thank you for looking and good luck/skill bidding.
|
|
|
Pratt Burnerd 3 Jaw Chuck 6" Model 1219 00360 with Reversible Jaws & Mount Plate
Used Pratt Burnerd 3 Jaw Chuck 6" Model 1219 00360 with Reversible Jaws and Mount Plate Item is used but fully functional and may contain markings. Scratches, nicks, dings, rust, or discolorations not shown in the specific angles of the photos. The photos are of the actual item you will receive. Pratt Burnerd 3 jaw chuck 6" Model 1219 00360 with reversible jaws and mount plate in good condition. This is an Adjust-Tru centering chuck. With a 1 ¾” through center hole. The chuck comes with reversible jaws. Aftermarket 2 3/16"10 TPI mount plate with screws. And chuck key as shown in the photos. The back plate is a standard mount for a lot of Hardinge spindles. 5C collet closers, and indexers. It is a common size. See General Information/Terms and Conditions listed below for details. After purchasing. Pay instantly with PayPal! ... moreCredit cards and eChecks are also accepted through PayPal! General Information/Terms and Conditions Product Description: Please see the individual auction for item specific details. The buyer is responsible for the item installation/use and any liability associated with it. Shipping Charges: The shipping charges are listed on the individual auction and are based on the mailing weight of each item. Combined shipping discounts are available for multiple purchases. Please see the listing for details. Payments: Payments must be received within 3 days of the auction closing. The accepted payment methods are: PayPal. credit cards and eChecks through PayPal. All payments must clear before the item ships. If a payment problem should arise, please contact me to work something out and avoid an unpaid item dispute. If no payment or response has been received even after being sent a few invoice or message reminders. The non-paying buyer will be reported to Ebay. Communications: Please ask any questions or communicate through the Ebay messages. The messages are checked periodically and responded to as promptly as possible. For shipments. You may also receive a separate email from Ebay or
|
|
|
SET OF 3 USED LATHE TWO-STEP REVERSIBLE HARD CHUCK JAWS (11505-15)
LISTING IS FOR A SET OF 3 USED TWO STEP REVERSIBLE HARD JAWS BRAND: PART# 11505-15 ALL MEASUREMENTS ARE APPROXIMATE LENGTH: 4.690" HEIGHT: 3.470" WIDTH: 2.480" HEIGHT TO FIRST STEP- 1.510" HEIGHT TO 2ND STEP- 2.510" GROOVE SLOT WIDTH- 1.00" KEY SLOT WIDTH- 1.50" HOLE SPACING- 2.50" CONDITION- WELL USED SOME SURFACE RUST PITTING THROUGHOUT SQUARE SERRATED KEYS HAVE SOME NICKS. DINGS AND SURFACE RUST PITTING Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. ... moreWE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJU
|
|
|
Lathe Chuck Warner Swasey 21"4-jaw Nice ConditionWith T Wrench And Jaws. 1614-S
Here is a Warner Swasey 1614-S 4-jaw 21" chuck with T-Wrench and Jaws. This chuck was used in a large machine shop for some specialty jobs and mostly sat on the shelf. It is in perfect condition. Jaws are nice also. No bumps or bruises. Wrench is not pictured but goes with. It is bolt on type to the flange. This is a high quality made in USA piece. I have sen these used or reconditioned for upwards of 3500.00. I have this one priced way below market value. No disappointments. If this part is not what I say I will give a full refund including shipping. I can crate this part for free. I encourage picking it up at my shop. It does weigh in the 300-350lb range by guessing. Will help on shipping and getting it on a truck for freight. Buyer pays actual truck freight and sets up pickup. I will skid and load. Posted with
|
|
|
Huron & other mfgr chuck jaws 9 pcs
Up for sale are these Huron& other mfgr chuck jaws 9 pcs. Item s.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146ab162978-0x115-
|
|
|
Lot of change gears and center chuck jaws
This is a lot of center chuck jaws. Change gears and miscellaneous tools. I do not have specifics for these pieces. They were in a box of tools purchased at auction.
|
|
|
HARDINGE 5" 3 JAW CHUCK ID + OD JAWS TAPER MOUNT ***VGC***
HARDINGE 5" 3 JAW CHUCK ID + OD JAWS TAPER MOUNT*VGC* HARDINGE 3 JAW CHUCK MODEL 30A-HB. BOTH ID AND OD JAWS. TAPER SPINDLE MOUNT MFG ENGLAND. VERY GOOD CONDITION. NO CHUCK KEY*QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-146ad203be8-0x108-
|
|
|
SET OF 4 USED APEX TONGUE & GROOVE LATHE CHUCK SOFT JAWS (004-085046 C/D)
LISTING IS FOR A SET OF 4 USED LATHE CHUCK SOFT JAWS BRAND: APEX PART# 004-085046 C/D TONGUE WIDTH: 500" GROOVE WIDTH: 312" OAL: 3.875" JAW WIDTH: 1.250" BOLT SPACING: 1.750" HEIGHT: 2.412" CONDITION: GOOD USED A FEW NICKS AND DINGS ON JAWS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WIT
|
|
|
10MSH Type Aluminum Tall Chuck Jaws for 10 Inch lathe Chuck
10 MSH Type chuck jaws in excellent condition for used jaws. The bolt hole patturn is the same as Huron 10 MSH. The jaws are off a 10 inch Buck Chuck. They have only been bored on one end. The dimensions are 5 inch long. By 2 7/8 high, by 1 3/4 wide. NOTE: One jaw has a small radial notch on one side where I needed a special clearance.
|
|
|
10MSH Huron Chuck Jaws for 10 Inch lathe Chuck Milled for square stock
Huron 10 MSH chuck jaws in excellent condition for used jaws. One end is milled to hold square material. The other end is very slightly bored. Of course if you dont want the square end as it is you can bore it out. The jaws are off a 10 inch Buck Chuck. The dimensions are 3 15/16 long by 1 7/8 high by 1 1/2 wide.
|
|
|
lathe chuck w 3 sets of jaws. 1 x 8 thread
lathe chuck; 1 x 8 thread; has been used. Needs to be cleaned and oiled. THIS UNIT IS MISSING the"wrenches" that open and close the chuck. Comes w all items in pictures.
|
|
|
JACOBS Drill Chuck 20N Morse Taper Shank 5JT Key NEW Set of Jaws Nuts
Up for your consideration is the Jacobs Drill Chuck(20N) with a Morse Taper Shank 5JT Key and a brand new repair/recondition kit of Jaws and Nuts. The Repair/Recondition kit sells for over $300.00 alone and it is brand new. Never opened. This will be shipped in a large flat rate box. Please ask any questions before buying. Will consider any serious offers.
|
|
|
SET OF 3 USED JERGENS LATHE CHUCK SQUARE SERRATED TOP JAWS 15813
LISTING IS FOR A SET OF 3 USED LATHE CHUCK SQUARE SERRATED TOP JAWS BRAND: JERGENS PART# 15813 KEY SLOT WIDTH: 996" GROOVE WIDTH: 751" OAL: 4.50" WIDTH: 1.750" BOLT SPACING: 1.750" HEIGHT: 1.408" BOLT SIZE: 625" HEIGHT TO 1st STEP: 1.00" STAMPED ON SIDE OF JAWS: 3ST5542 CONDITION: GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) ... morePLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_
|
|
|
5" HARDINGE 3 JAW CHUCK W SET OF REVERSING JAWS ATLAS LOGAN SOUTH BEND PART
5" HARDINGE 3 JAW CHUCK W SET OF REVERSING JAWS MODEL# 30A-HC 1" X 10 TPI CUSTOM FITTED BACK PLATE IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-146b2e543a3-0x10f-
|
|
|
24" 4-JAW EXTEBNDED STROKE CHUCK WITH JAWS
24" 4-JAW EXTEBNDED STROKE CHUCK WITH JAWS 4" DIAMETER HOLE S/N 21843 2A15 EX 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146b492dff9-0x10f-
|
|
|
ROVI 6" CNC LATHE ALUMINUM SOFT CHUCK JAWS - #A650-06-P2
Made by Rovi. This is a used Set of 6" Aluminum Soft Chuck Jaws. Model# A650-06-P2 SPECIFICATIONS: Diameter: 6" Thickness: 200" Channel Width: 0.394" Center Distance Between Hole Centers: 0.748" Screw Diameter: 8mm Comes exactly as shown in pictures.
|
|
|
Poland 6" 3 jaw D1-3 spindle Lathe Chuck with replaceable top jaws
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Poland 6" 3 jaw D1-3 spindle Lathe Chuck with replaceable top jaws Good condition. Comes with key probably should be cleaned and lubricated I acquired this item from a recently closed machine shop check all pics All sales final! Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
Tongue & Groove Set of 3 Reversible Hardened Steel Chuck Jaws
Used Tongue& Groove Set of 3 Reversible Hardened Steel Chuck Jaws Item is used but fully functional and may contain markings. Scratches, nicks, dings, rust, or discolorations not shown in the specific angles of the photos. The photos are of the actual item you will receive. Used tongue& groove set of 3 reversible hardened steel chuck jaws in good condition. Original matched set of 3. With#2508 stamped in the slots. Dimensions are as follows: Slot Width: 312" Center Distance: 1.500" Tongue Size: 500" Jaw Height: 1.500" Jaw Width: 1.000" Jaw Length: 2.267" Mounting Hole Dia: 7/16" Counterbore Hole Dia: 675" See General Information/Terms and Conditions listed below for details. After purchasing. Pay instantly with PayPal! Credit cards and eChecks are also accepted through PayPal! General Information/Terms ... moreand Conditions Product Description: Please see the individual auction for item specific details. The buyer is responsible for the item installation/use and any liability associated with it. Shipping Charges: The shipping charges are listed on the individual auction and are based on the mailing weight of each item. Combined shipping discounts are available for multiple purchases. Please see the listing for details. Payments: Payments must be received within 3 days of the auction closing. The accepted payment methods are: PayPal. credit cards and eChecks through PayPal. All payments must clear before the item ships. If a payment problem should arise, please contact me to work something out and avoid an unpaid item dispute. If no payment or response has been received even after being sent a few invoice or message reminders. The non-paying buyer will be reported to Ebay. Communications: Please ask any questions or communicate through the Ebay messages. The messages are checked periodically and responded to as promptly as possible. For shipments. You may also receive a separate email from Ebay or PayPal confirming your package shipment with a delivery confirmation number.
|
|
|
Bison 0204 chuck jaws 4 pcs 8"
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale are these NICE Bison 0204 chuck jaws 4 pcs 8" Items are in good shape. you get all you see in pic.
|
|
|
USED SET OF 3 SCHUNK SOFT TDP LATHE CHUCK JAWS MTG-315
LISTING IS FOR A USES SET OF 3 SCHUNK SOFT TDP LATHE CHUCK JAWS BRAND: SCHUNK PART# MTG-315 SOFT TDP JAWS TONGUE WIDTH: 26.00mm GROOVE WIDTH: 12.00mm OAL: 5.71" JAW WIDTH: 1.38" JAW HEIGHT: 2.13" BOLT SPACING: 2.12" BOLT HOLE SIZE: 500" 3.250" RAD(STAMPED ON JAW) CONDITION: GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL ... moreAHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE
|
|
|
5 Inch Gamet 3 Jaw Power Chuck (43468) w/ Soft Jaws
Gamet 3 Jaw Power Chuck 5" Aluminum Soft Jaws Included
|
|
|
TONGUE AND GROOVE T&G CHUCK JAWS , 2 SETS FOR 12" CHUCK
TONGUE AND GROOVE T&G STEEL CHUCK JAWS. 2 SETS FOR 12" CHUCK groove width: 0.500" tongue width: 0.750" hole space: 2.500" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146b9884ee5-0x117-
|
|
|
Hardinge Lathe Chuck Jaws A324
Description Hardinge Lathe Chuck Jaws A324 Good Condition Payment Payment must be made within 3 days of purchase. Shipping Shipping will be by FEDEX Ground. USPS Priority, or Freight Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed ... moreto 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Emco Super 11 Camlock D1-4, 3 Jaw Chuck 5-1/2" Both Sets of Jaws & Key 0607-E
Description: 3 Jaw Chuck for Camlock D1-4 spindle nose of Emco Super 11. Condition: Very good mechanical condition. Some minor tool marks and some oil and oxidation stains from age. FOR PRECISION. THE JAWS OF THIS CHUCK SHOULD BE GROUND IN YOUR LATHE AFTER INSTALLATION. Otherwise. You're just wasting your money. Listing Data Verified By: Chuck N. Stein. PH.D. Shipping: Includes professional packaging and shipping flat rate to the US. Mexico, Canada. EU, Australia and New Zeeland. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a ... moremistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a Paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
|
|
|
6 inch BUCK FORKARDT 6 INCH 3 JAW ADJUST TRU LATHE CHUCK TOP REVERSABLE JAWS
A USED 6 INCH BUCK ADJUST TRU 6 INCH 3 JAW WITH TOP REVERSABLE JAWS WITH OUT A BACKPLATE with a BUCK CHUCK KEY WITH THE ALLEN ADJUSTER HANDLE
|
|
|
LOT OF 4 SETS HARD JAWS FOR 3 JAW CHUCK
Lot of 4 Sets Hard Jaws for 3 Jaw Chuck Jaws Measure 2-1/2" x 1-3/4" x 3/4" Overall All Sets Numbered 1. 2, 3 No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
6 1/4" 3 JAW LATHE CHUCK W REVERSING JAWS & KEY SOUTH BEND ATLAS CRAFTSMAN
6 1/4" 3 JAW LATHE CHUCK W REVERSING JAWS& KEY 1 1/2 X 8 TPI I F YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
Robohand Destaco PPC-12-RE-C Pneumatic Gripper / Lathe Chuck w/ Graphite Jaws
Destaco/ Robohand PPC-12 cylindrical 3-jaw pneumatic gripper with graphite jaws. It can grip cylinders up to ~ 1.0" in diameter. It is in excellent cosmetic and working condition. And is guaranteed to be 100% functional.
|
|
|
HD HHT Yama 3" 5C Scroll Collet Chuck for Lathe with extra set of jaws
Rarely used- in excellent condition
|
|
|
7 1/2" DEXTER LATHE CHUCK 3 JAWS ATLAS CRAFTSMAN LOGAN PART
7 1/2" DEXTER LATHE CHUCK 3 JAWS 1 1/2" X 8 TPI THE HOLE IN THE FRONT BY THE JAWS IS 2 1/2" IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
Bison 8" 4 Jaw Plain Back Chuck with Chuck Key, Bolts, and Two New Jaws
Bison 8" 4 Jaw Plain Back Chuck with Chuck Key. Hold Down Bolts, and Two New Jaws Buyer pays actual shipping only. No added handling fees.
|
|
|
Northfield RNF-6100A A-L-3-6-1 Soft Round Chuck Jaws
Northfield RNF-6100A A-L-3-6-1 Soft Round Chuck Jaws Material: ALUMINUM Jaw Diameter: 6.00" Height inch: 2.00” Number of Holes: 4 Number of Pins: 5
|
|
|
NICE 6-1/4" BISON 3-JAW CHUCK W/ 2 PC. JAWS NO.5 MORSE TAPER SHANK
6-1/4" BISON SELF CENTERING SCROLL CHUCK 2 PC. REVESIBLE TOP JAWS. 3.000 MAX. RPM. NO.5 MORSE TAPER SHANK. Nice used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, and PayPal accepted. Buyer pays actual shipping cost. Thanks for looking! a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146caebcfb9-0x107-
|
|
|
9 3/8" 3 jaw chuck. missing jaws
Selling a 9 3/8" chuck for a metal lathe. In good condition. Please see below for the mounting and other specifications: Manufacturer: Unknown Diameter: 9" Jaws Included: No Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. THIS ITEM WILL BE WELL PACKAGED AND SHIPPED VIA UPS. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Schaublin 70 Burnerd 3 jaw chuck with internal, external and soft jaws
This is a really beautiful 3 Jaw universal Burnerd chuck( original equipment for Schaublin 70 lathes) in great condition. It comes with internal. External and soft jaws. The soft jaws are new and have the original packing grease on them, it is not rust. The chuck measures 3 1/4" in Diameter, Body thickness not including jaw protrusion is 2" I actually hate to part with this chuck, it is the nicest on I have come across in years! Shipping includes full insurance. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146cbd4472e-0x112-
|
|
|
6" ATLAS LATHE CHUCK WITH 4 REVERSIBLE JAWS ATLAS CRAFTSMAN LOGAN SOUTH BEND
Original Atlas Lathe Chuck. 6" diameter. Appears to be in good condition, albeit used. For a lathe with a 1 1/2- 8 threaded spindle nose. Payment must be made by July 3rd or significant delays in shipping will exist. I am going on vacation. I have lots of other items listed. Please check them out for combined shipping savings! Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact ... moreme through Ebay. Check out for more great items! I combine on shipping! Powered by
|
|
|
8" 3-Jaw Chuck for Lathe Warner Swasey M2307 w/ Cushman Jaws
Self centering chuck three jaw scrolling chuck. Feel free to contact me with any questions. Sold as-is
|
|
|
BISON 3 Jaw Chuck 6 in. Atlas Craftsman Lathe Reversible Jaws 1-1/2 x 8 Mount
BISON 6 in. Self-Centering 3-Jaw chuck. No. 3285- 6-1/4" 1-1/2" 8. N_max = 3000 min_1. Reversible Jaws(inside/outside) 1-1/2" x 8tpi mount. Measures about 6-14 in. across. I purchased the chuck a few years back and used it on my Atlas/Craftsman at home. Included also is the chuck key. No damage of any kind. In perfect working condition with minor wear from normal use. It does have small staining from oil or lubricant(please view pictures carefully before bidding) Please be aware that the chuck was used in a machine shop type of environment and might have a scent as such. Please be assured that the chuck functions perfectly as it should. Only the chuck and key are included in this auction(the lathe and other items shown in various pictures are for visual reference only and are not included in the auction) 14-day returns honored ... moreif the item is not as described. Shipping charge includes insurance. Please view my other listings for more machinist/machining tooling and precision measurement equipment(mostly Mitutoyo: height gauges. Calipers, micrometers, etc. Some Snap-on tools also. I will be listing most of my tools for auction within the next few days. I accidentally cancelled the auction earlier. Please accept my apologies for any inconvenience. Thank you! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-146cee16594-0x108-
|
|
|
4 Jaw 8-1/4" Chuck ( Independent moving Jaws) With D1-3 Mount
4 Jaw 8-1/4" Chuck( Independent moving Jaws) With D1-3 Mount 8-1/4" Chuck 4 Jaw Mounting D1-3 Camlock Does not come with Chuck Key Jaws Move Independently(SOLD AS IS) Comes as pictured Used- In FAIR Condition(Has some rust and wear and tear) Shipping Includes Handling and Postage to the 48 Contiguous States(Alaska and Hawaii Extra) TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may beoffered to the next highest bidder within 4 business days. Any balance not paidin full will result in an unpaid dispute being filed with eBay after 4 businessdays. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please callus at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies ... moreto process a merchantsale. We do NOT accept credit cards for eBay purchases EXCEPT for PayPal payments.You may pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a 1-5business day delay to verify funds on any non-certified check. Please contactus in advance if you have questions so we may accommodate the delivery scheduleof your item accordingly. California State Sales Tax State Tax applies to all state residents and businesses unless youprovide proof of a resale certificate to us. Please Fax to 626-443-9588. Warranty Sterling Machinery offers a 30-day MDNA sanctioned warranty unlessotherwise stated in the description of the ad. Items that are described andadvertised‘AS-IS’ are NOT covered by this warranty and the buyer releasesSterling Machinery from any liability or claims related to such. Frequently Asked Questions Q: Can Sterling Machinery Help with the logistics of Machineryshipping. And Loading? A: Yes. We can arrange for your machine to be loaded. Shipped via flatbed, orcommon carrier. We have relationships with machinery riggers, machine
|
|
|
WOOD LATHE Chuck jaws 4" -A DEAL-
This auction is for USED set of 4" chuck jaws Not sure what chuck the we used on Please see images attached showing back plates and dimensionless of screw holes. Make sure it will fit your chuck before bidding Buyer pays $ 15 shipping and handling
|
|
|
Lot Of 3 Kitagawa KT-15500 Chuck Jaws 2-1/2" W x 6-1/2" L x 5" H*
Lot Of 3 Kitagawa KT-15500 Chuck Jaws 2-1/2" W x 6-1/2" L x 5" H* Left Side: Right Side, Dings On Jaws Indicates Use Manufacturer: Kitagawa Model: KT-15500 Description: Lot Of 3 Chuck Jaws 2.5" W x 6.5" L x 5" H Packaging Condition Details: Not in Original Manufacturer Packaging Groove Width: 22mm Screw Size: 20mm Hole Space: 43mm Hole to Front: 3-7/16" Width: 2-1/2" Length: 6-1/2" Height: 5" No Additional Info Found*This item is not eligible for combined shipping. Includes: Chuck Jaws Packaging Condition: Not in Original Manufacturer Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit ... morecards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an
|
|
|
Used toolmex lathe chuck 100mm 3 jaw self centering +jaws direct from Myford ltd
Toolmex 3 jaw self centering 100mm diameter Chuck has a fitted backplate with the Myford spindle thread(1- 1/8" x 12tpi) Comes with both internal and external jaws and original chuck key Direct From Myford Ltd PLEASE NOTE THAT POSTAGE TO THE HIGHLANDS AND ISLANDS(INCLUDING NORTHERN IRELAND) IS AN ADDITIONAL £6.50. DUE TO EXTRA COURIER CHARGES. For any other information or card payment. Please phone 01422 885766 at any time during shop hours. Or email us at myfordinfo@aol.com
|
|
|
MACHINIST TOOLS LATHE MILL Huge Lot of Machinist Lathe Chuck Jaws
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. Rust. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL ... moreOF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 On May-21-14 at 19:35:41 PDT. Seller added the following information: PLEASE DISREGARD THE STATEMENT ABOUT THE WOOD STAND. IT DOES NOT APPLY TO THIS AUCTION. IT IS A MISTAKE. THANK YOU*
|
|
 |