|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Winona, United States Weldtec Part # SW-320SA-12DX. Features such as silver brazed copper construction which increases electrical current capacity and dissipates heat most ... moreefficiently. Resilient high temperature silicone rubber insulation with high dielectric properties which resist "HF" current leakage, chipping, cracking and withstands temperatures to 500 degrees flexible over braided rubber hoses and power cables provide flexibility and maneuverability not available with traditional vinyl tube materials.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V 5200DX 3IN1. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. • Argon Regulator and Tank for TIG ... morewelding. 50 Amp Plasma Cutter / 200 Amp TIG/ARC/MMA Welder.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Weldtec Part # SW-320-25DX. For Use With: Weldtec Speedway High Performance, 320 amp Torches. Features such as silver brazed copper construction which ... moreincreases electrical current capacity and dissipates heat most efficiently.
$91.61 Shipping Condition: Used Location: New Albany, United States This Miller Maxstar 200 Dx Tig/Stick Welder is a heavy-duty inverter welder that is perfect for welding steel and other materials. It features a DC polarity ... moreand a TIG welding process, making it ideal for precision welding.
Buy It Now
Condition: Used Location: Rancho Cordova, United States Miller Dynasty 300DX TIG Welder This is a used welder in good working condition. It was just checked out and load tested by an authorized Miller Service ... moreCenter. This is the TIG Runner package with Coolmate cooler. Foot pedal, and cables shown. The cart in the photos is also included. The machine features stick welding and TIG welding capability. It will weld all kinds of steel. Stainless steel, aluminum and other alloys. This is a top notch welding machine. But it really shines when welding aluminum. The high frequency settings will weld aluminum like there's no tomorrow. Most all of the professional marine fabrication ships use the Dynasty series Welders. While the 200 Dynasty's are great machines. They typically must by run at their capacity of 200 Amps. The 300 DX, however, can be run at 200 Amps without even straining it and even up to 300 Amps when the material/job calls for the higher amperage. Under normal welding of 200 amps, the duty cycle and the demand will be much lower than that of the 200 series Dynasty. This machine will operate on 220V Single Phase or Three Phase power. This make the unit very flexible with respect to shop power availability. As stated above. It was just checked out and load tested by Carolina Welders(an authorized Miller Service Center) on 30-Dec 2014. Call us directly at(910) 547-7302 if you have any questions or if you would like a shipping quote. Please call us before buying if your feedback count is less than 10. We will guarantee this machine works properly upon delivery. There will be no warranty beyond that time. Consider our 11+ years of selling combined with our 100% satisfaction rating and buy with confidence. Thanks! ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b09362ab9-0x10a-
Buy It Now
$15.67 Shipping Condition: New Location: Vancouver, United States Replaces Miller Part #'s Miller Part # 300548 (Pulser) & 300547 (Sequencer) Only. This is For the Newer Miler Syncrowave 250DX Units That Have a Slanted ... moreFace. If you have an older 250DX (Flat Face) unit this will not fit (See Photos).
Buy It Now
Condition: Used Location: Rochester, United States Used. Miller Syncrowave 250 DX TIGRunner 907194 Tig welder water cooled complete setup… miller 250dx power supply with built in water cooler, weldtec#20 ... morewater cooled tig torch with 25'ft lead& cover, 12.5'ft ground lead& 300amp clamp, New smith argon#32-30-580 flow regulator with 8'ft hose, 23'ft 8/3 power cord installed(pre wired 230volt single phase) miller RFCS-14HD foot control… all in good condition, tested and works like it should… local pickup/free loading in long beach ca 90808… please email any questions 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14307da79a0-0xf3-
Buy It Now
Free Shipping Condition: New Location: Tulsa, United States
Buy It Now
Condition: Used Location: New Paris, United States Miller Syncrowave 250DX TIG Welder Power Source W/Bernard Water CoolerSerial No: ME010029LStock No: 907195Bernard Water CoolerModel: 6500SSComes just ... moreas pictured. Welder is missing side cover panel. See pictures Welder is covered with our 30 day after date of install *Warranty*This welder will ship via freight carrier. Please contact us for shipping details or any other questions you may have. Location: NIBHave I not commanded you? Be strong and of good courage; do not be afraid, nor be dismayed, for the LORD your God is with you wherever you go.Joshua 1:9
Buy It Now
$16.67 Shipping Condition: New Location: Vancouver, United States Replaces Miller Part #'s Miller Part # 190734 (Pulser) Only. This is For the Older Miler Syncrowave 250DX Units That Have a Flat Face. If you have an ... moreNewer 250DX (Slanted Face) unit this will not fit (See Photos).
Buy It Now
Free Shipping Condition: New Location: Duluth, United States With solid 0.5-in DINSE type male pin. WeldingCity® Gas-Thru Cable Adapter Dinse-25 (Small) TIG Welding Torch 9/17 | US. TIG Torch Parts. TIG Torch Accessory ... moreKits. TIG Complete Torches. Welding Safety.
Buy It Now
$99.94 Shipping Condition: Used Location: South Windsor, United States All products are brand new. Not rebuilt,not reconditioned and carry a full manufactures warranty. Unless otherwise specified. We are an AUTHORIZED MILLER- ... moreHOBART- DISTRIBUTOR. We have been serving the welding industry for over 26 years. So buy with confidence! B& R Welding Supplies is family owned and operated. You can speak with a real person at any time for help in the application processes. Miller Dynasty 200 DX Part# 907099011 BRAND NEW FREE SHIPPING IN THE 48 STATES MACHINE ONLY Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry. Features: BLUE LIGHTNING TECHNOLOGY Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help produce desired arc/weld bead characteristics. Built-in pulser reduces heat input; adds arc stabiility(DX model only) Fan-On-Demand cooling system only operates when needed. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120- 460 VAC. Single or three phase power without removing the covers to relink the power source. Portable in the shop or at the job site- at 45 lb the unit is easily moved from location to location. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. AC/DC power source has state-of-the-art operator interface a
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
$85.00 Shipping Condition: Used Location: United States This Miller Electric Maxstar 200 DX TIG welder is up for sale. It's a heavy-duty welding machine welding process used is TIG and it's suitable for industrial ... morepurposes. The welder is pre-owned, but it's in good working condition and has been well-maintained. If you're looking for a reliable and efficient welding machine, this Miller Electric Maxstar 200 DX TIG welder is a great choice!48 continental states
Buy It Now
$113.79 Shipping Condition: New – Open box Location: Tiverton, United States For sale is a brand new 2024 miller dynasty 210dx. With auto-line technology plug into any electrical service available and weld away. Original box and ... morepaper work with this unit, bought 2 for a project we never ended up using the second.shipping on me. Any other questions or offers feel free to reach out.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States A CK Worldwide tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig welders. This torch is MADE IN USA.This ... moreis a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
Buy It Now
Condition: Used Location: Livonia, United States Miller Welder Complete System. System is used but in good working condition. Cables and Hoses.
Buy It Now
Condition: Used Location: Pico Rivera, United States Model #: Syncrowave 250 DX. This is a CC-AC/DC Square Wave Power Source w/ Tig Runner Cooling System in working condition. Equipped With - Miller Tig ... moreRunner Cooling System. Lift-Arc - Simply touch the tungsten to the work piece.lift.and the arc is initiated instantly and automatically without the use of high frequency.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
2d 3h 5m 10s 0 bids
$1500.00 Now
$89.52 Shipping Condition: Seller refurbished Location: Huntingdon, United States Miller Maxstar 200 DX. P/N 903701-01-1, TIG& Stick Welding Unit Condition: Good. Missing front door, Clean but has scratches Does not include any ... moreaccessories. Just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States With solid 0.5-in DINSE type male pin. WeldingCity® 5-pk Cable Adapter Dinse 35mm (195378) TIG Welding Torch 9/17 | USA. WeldingCity® 5-pk Gas Pass-Thru ... moreCable Adapter Dinse-35 TIG Welding Torch 9/17 US.
Buy It Now
$215.00 Shipping Condition: Used Location: Monroe, United States Used. Miller Syncrowave 250 DX TIGRunner 907194 Tig welder water cooled complete setup… miller 250dx power supply with built in water cooler, weldtec#20 ... morewater cooled tig torch with 25'ft lead& cover, 12.5'ft ground lead& 300amp clamp, New smith argon#32-30-580 flow regulator with 8'ft hose, 23'ft 8/3 power cord installed(pre wired 230volt single phase) miller RFCS-14HD foot control… all in good condition, tested and works like it should… local pickup/free loading in long beach ca 90808… please email any questions 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14307da79a0-0xf3-
Buy It Now
$16.67 Shipping Condition: New Location: Vancouver, United States Replaces Miller Part #'s Miller Part # 300547 (Sequencer) Only. SN: LE282983 And Later For 250DX Models. This Requires You To Open Up Your Miller 250DX ... moreto Install. If you are not comfortable with opening your unit hire a Qualified Professional!
Buy It Now
$400.00 Shipping Condition: Used Location: Mims, United States Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords ... morefor 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
Buy It Now
$15.00 Shipping Condition: New Location: Daly City, United States This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This foot pedal ... moreis used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States The torch includes a long back cap as pictured.
Buy It Now
$567.43 Shipping Condition: Used Location: La Marque, United States Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords ... morefor 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
Buy It Now
Condition: Used Location: Pico Rivera, United States bought new used very little just a few hrs never got a chance to use it.everything is here and works and goes with it except bottle. I rent it if you ... moreare interested call me prefer to sell locally, if possible. this is a sell through e-bay item AL 2092772861
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Rear plug uses DINSE type cable adapter LDT-917-F with solid 0.5-in male pin and gas hose; compatible with Other TIG welders with Dinse 50-mm receptacle. ... moreWeldingCity® TIG Welding Torch 9 & 17 Cable 57Y03R 25-ft & Dinse Gas-thru Rear.
Buy It Now
Condition: Used Location: New Paris, United States Miller Syncrowave 250DX TIG Welder Water Cooled Serial No: LF090987Stock No: 907194Bernard Water CoolerModel: 3500SSComes just as pictured. Welder is ... morecovered with our 30 day after date of install *Warranty*This welder will ship via freight carrier. Please contact us for shipping details or any other questions you may have. Location: ST2Have I not commanded you? Be strong and of good courage; do not be afraid, nor be dismayed, for the LORD your God is with you wherever you go.Joshua 1:9
Buy It Now
$60.00 Shipping Condition: Seller refurbished Location: Spencerport, United States This Miller Electric Maxstar 200 DX TIG Welder 907684 is a complete unit that is ready to use. The welder is made by Miller and is designed to weld stainless ... moresteel using the TIG process. The unit type is a unit and the polarity is DC.
Buy It Now
$250.00 Shipping Condition: Used Location: Jacksonville, United States bought new used very little just a few hrs never got a chance to use it.everything is here and works and goes with it except bottle. I rent it if you ... moreare interested call me prefer to sell locally, if possible. this is a sell through e-bay item AL 2092772861
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States You are bidding on a replacement HTP USAWELD brand tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig ... morewelders. This torch is MADE IN USA. This is a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection. Some other models it will fit: Everlast 200DX. 250EX, 315LX, 255EXT, 280STH A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 9mm quick connect male fitting. If you need the torch in any other configuration(25 foot hose. Flex head, different size dinse or gas connection) send us an email for a quote. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. 1725FX-35D QD
Buy It Now
Free Shipping Condition: Used Location: Monument, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
Buy It Now
$130.94 Shipping Condition: Used Location: El Cajon, United States With the ability to weld aluminum, stainless steel, and mild steel, this welder is perfect for a variety of industries. Whether you are a professional ... morewelder or just starting out, this Miller Dynasty 210 DX welder is the perfect tool for all your welding needs.
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Tig Torches. Dynasty® 210. Miller Products. TIG (GTAW). TIG AC (GTAW-AC). TIG DC (GTAW-DC). Dynasty® 210, 120-480 V. (2) 50 mm.
Buy It Now
Free Shipping Condition: Used Location: Huffman, United States This Miller MaxStar 210 DX 907684 TIG welder is a top-of-the-line tool for all your welding needs. It's great for those looking for a TIG welder that ... morecan handle a variety of materials and thicknesses.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V 5200DX 3IN1. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp TIG/ARC/MMA ... moreWelder & Argon Regulator. • Argon Tank for TIG welding.
Buy It Now
Free Shipping Condition: New Location: Chattanooga, United States 2.4mm x 175mm. Miller Econotig, Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 225, 255 and 275 welders. Precision Tig ... more175, 185, 225, 255 and 275 welders HTP Invertig 201, 160DC, 130 DCHF, 130 DCL, Miller Dynasty 200SD and 200DX, and the Lincoln V205-T.
Buy It Now
$40.00 Shipping Condition: New Location: Daly City, United States ACDC TIG Welders. ACDC Combo. 12 ft. Everlast 26 Series TIG torch with 35 series DINSE stle connectors and torch switch for 2T/4T operation. DC TIG Welders. ... moreEverlast regulator made from billet brass. Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 17 seriesFLEX HEAD tig torch and will plug right in to the Miller Dynasty 200DX Tig welders and any other welder which has a 1/2" twist lock ... moreconnector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 9 seriesFLEX Head tig torch and will plug right into the Everlast Tig Welders which have a 1/2" twist lock connector and a 9mm quick connect ... moregas connection. A 9 series torch is the standard torch found on many tig welders.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Rear plug uses DINSE type cable adapter LDT-917-F with solid 0.5-in male pin and gas hose; compatible with Other TIG welders with Dinse 50-mm receptacle. ... more150A air-cooledFlexible head body withGas Valve WP-17FV.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States You are bidding on a replacement HTP USAWELD brand tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig ... morewelders. This torch is MADE IN USA. This is a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection. Some other models it will fit: Everlast 200DX. 250EX, 315LX, 255EXT, 280STH A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 9mm quick connect male fitting. If you need the torch in any other configuration(25 foot hose. Flex head, different size dinse or gas connection) send us an email for a quote. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. 1725FX-35D QD
Buy It Now
$760.00 Shipping Condition: Used Location: Philippines We will then arrange the booking and pick-up service. Item Condition: Used.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Withsolid 0.5-in DINSE type male pin. TIG Torch Parts. TIG Torch Accessory Kits. TIG Complete Torches. Welding Safety. Welding Cables & Connectors. For ... moreLincoln welders, this torch hose/cable plug may work with: Lincoln Invertec® V250-S/V275-S/V300-Pro/V350-Pro series, Lincoln PowerWave ® 355 and Lincoln ALT 304, as well as all other welders using LDT-26-R rear (Exception may occur. ).
Buy It Now
Free Shipping Condition: New Location: Corydon, United States Features such as silver brazed copper construction which increases electrical current capacity and dissipates heat most efficiently. Resilient high temperature ... moresilicone rubber insulation with high dielectric properties which resist "HF" current leakage, chipping, cracking and withstands temperatures to 500 degrees flexible over braided rubber hoses and power cables provide flexibility and maneuverability not available with traditional vinyl tube materials.
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
$66.59 Shipping Condition: Used Location: Harlingen, United States For sale is a Miller Syncrowave 250 air-cooled TIG/stick welder that is 2 years old. Requires 230 power source. 250 amp machine. Outside shell of machine ... moreis in fairly rough condition, cosmetically, but the machine works great. Does not come with any cart, accessories, or water cooler, just strictly the power source. PLEASE BE AWARE: This item weighs nearly 400 lbs so shipping on this item would likely be fairly expensive but local pickup is available as well for anyone in the area or willing to drive. The shipping calculator for this item is wrong because it would not let me enter a weight of 400 lbs. This item, if shipped, would be shipped freight so I would have to get an estimate of shipping costs based on the buyers location and would then charge for shipping accordingly. Please contact me with any additional questions. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1478ebe258b-0x112-
Buy It Now
Free Shipping Condition: New Location: Goleta, United States ALWAYS HIGH QUALITY PRODUCT from SIMADRE. • Suitable for TIG,MMA,MIG/MAG, plasma cutting all kinds of welding & cutting mode except laser welding. • Suitable ... morefor high welding operation temperature. • Ample mask space and very safe structure.
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States Excellent Quality Foot pedal Includes 25 ft (8 m) cord and 14 pin plug, Miller styleMiller RFCS-14This is a replacement for the Miller RFCS-14 (Miller ... moreP/N 043 554) and the Miller RFCS-14HD (Miller P/N 194 744). This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This Coplay Norstar foot pedal is used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector!Also used for the T200 Norstar welder!.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States For sale is a Tig Torch Adapter that will allow you to connect any 1 7 series or 9 series Tig torch with a one piece cable assembly to a welder that has ... morea 1/2" dinse connector and a 5/8-18 RH male gas connection.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Weldtec Part # WTR-20-25DX. For Use With: Weldtec i-Headwith 920R Head Torches. Three distinct versions; Flex, Ball or Roto allow you to choose the model ... morethat best suits your needs. The Flex-Neck models allow the torch body to flex, positioning the head at various angles.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States The torch includes a long back cap as pictured.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States MILLER Maxstar 210 DX TIG Welder 45JU19. MILLER ELECTRIC 907684. Input Current 15 A @ 208V (Three-Phase), 26 A @ 208V (Single-Phase), Phase Single-/Three-Phase, ... morePolarity DC, Series Maxstar 210 DX, Stick Welding Maximum Output Current 210 A, Stick Welding Minimum Output Current 5 A, Stick Welding Output @ Duty Cycle 160 A @ 26.4 V, 60 Percent, 90 A @ 23.6 V, 60 Percent.
Buy It Now
$5.00 Shipping Condition: New Location: Elk Grove Village, United States
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Weldtec Part # SW-320-12DX. For Use With: Weldtec Speedway High Performance, 320 amp Torches. Features such as silver brazed copper construction which ... moreincreases electrical current capacity and dissipates heat most efficiently.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Weldtec Part # SW-320SA-25DX. Features such as silver brazed copper construction which increases electrical current capacity and dissipates heat most ... moreefficiently. Resilient high temperature silicone rubber insulation with high dielectric properties which resist "HF" current leakage, chipping, cracking and withstands temperatures to 500 degrees flexible over braided rubber hoses and power cables provide flexibility and maneuverability not available with traditional vinyl tube materials.
|
|
MILLER MAXSTAR 300 DX 903576-01-1 DC STICK TIG INVERTER WELDING WELDER
WarnerSales Warner See all my listings: WarnerSales MILLER MAXSTAR 300 DX 903576-01-1 DC STICK TIG INVERTER WELDING WELDER Offered is a USED Miller Stick/Tig Welder. Model: Maxstar 300 DX. Stock No: 903576-01-1. Description: This is a 300 amp advanced TIG/ Stick DC inverter welder with 8 programmed memory(4 tig 4 Stick) Has pulsing settings for TIG and DIG settings for stick. Processes TIG(GTAW) Welding Pulsed TIG(GTAW-P) Welding with DX Stick(SMAW) Welding Input Power Requires 3- or 1-Phase Power Amperage Range 5– 300 A Rated Output: 250 A at 30 VDC. 60% Duty Cycle(3-Phase) 200 A at 28 VDC. 60% Duty Cycle(1-Phase) We took this welder to a Miller service center and had it checked for function. A problem was found and repaired. The input diode. Both capacitors, contactor with circuit card assembly, and interconnecting switch were replaced. ... moreIt is now in correct working condition. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping cos
|
|
MILLER Syncrowave 250 DX Tig Welder w/ integrated Cooler
bought new used very little just a few hrs never got a chance to use it.everything is here and works and goes with it except bottle. I rent it if you are interested call me prefer to sell locally, if possible. this is a sell through e-bay item AL 2092772861
|
|
Miller Dynasty 200 DX TIG Welder with Stand Pedal Torch Leads and Tank
This is my pride and joy here. Very well kept. I'm sure you all are aware and how cool all the features are on the Dynasty 200DX. That's why you're looking at this. I'm just going to give you a list of what is included, and a description of the condition. The condition on the unit is a 9.9 out of 10. The condition on the torch and pedal are a 7 or 8 out of 10. The pedal cord has a splice in it that does not affect the functionality at all. I forgot to get pictures of the contractor kit and case. That will be included. Everything that is in the contractors kit that you don't see in the pictures is still in the case and is in brand new condition. And will be included as well. Beside that. The tank and custom made stainless steel cart and welding wire that you see in the pictures will all be included. I also have a bunch ... moreof cases of tungsten which will be included. Local Pickup or Buyer to arrange shipping. California Buyers will be charged 8% sales tax.
|
|
Miller Maxstar 200 DX P/N 903701-01-1 TIG & Stick Welder Unit
Miller Maxstar 200 DX. P/N 903701-01-1, TIG& Stick Welding Unit Condition: Good. Missing front door, Clean but has scratches Does not include any accessories. Just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Miller Maxstar 200 DX 125 Volt TIG Stick Welder 903701-01-1 Fabrication MIG
Up for your consideration is a Miller Maxstar 200 DX 125 volt TIG/Stick welder. Catalog#903701-01-1, Serial#LE 370539. It functions as it should.and has scratches. It can work on 110, 220, 208, 480, and 460 volt(single or three phase) Included are: tig torch, stinger, ground, gauges, and hoses. There is no foot pedal, and the connector on the tig torch will need to be changed if you just want to plug it in like the stinger and ground leads. The tig torch is included, but not pictured. The foot pedals are easy to find. They also make a remote that you can connect to your tig torch and you run it with your thumb. I have one on mine and I love it. These are excellent machines and you can google it to find out what exactly they can do. Also the little plastic panel door has a broken hinge pin(not an issue when closed) and there are various scratches. ... morePlease ask any questions you might have. Make sure to look at the other welders that I currently have listed. I mainly use Fed Ex even though the calculator shows it as UPS. The price will remain the same. I get far better service from them than UPS.
|
|
MILLER WELDER MAXSTAR 200 DX PORTABLE TIG / SMAW / CAC-A / GTAW-P WELDER stick
Good welding machine for stick and tig lightly used with low hours. SMAW AND GTAW Can put any output you want.
|
|
MILLER DYNASTY 200 DX AC/DC TIG Foot Control Contractor Package (air cooled)
I am selling my Miller Dynasty 200 DX AC/DC TIG welder with the Foot Control Contractor Kit Pkg(air cooled) I purchased this welder roughly 6 years ago new at Atlas welding supply in Berkeley CA. The Serial No. LH011462L indicates it was made before 2008 and they have made a couple of changes to the model. I have only used it a couple of times at home totaling 1 hour and 26 minutes with 234 arc strikes. These are recorded in the machines hour meter. It worked perfectly when last used. The machine looks as new and most components are in nearly new condition. Includes all that is in the photos- I believe everything in the miller kit is there but will not promise anything other than what is in the photos. I may amend this but I do not currently have the manuals to send with it. I moved and they are filed somewhere. The manuals are readily available ... moreto download from Miller This is a very nice welder. This Please contact me with any questions before buying.
|
|
MILLER TIG Welder Syncrowave 250 DX 250DX (200/230/460) Complete Package 951117
You are bidding on ONE(1) MILLER Electric Mfg. TIG Runner Welder Syncrowave 250 DX 250DX(200/230/460v) Complete Package 951117 These units are in good cosmetic and working condition. You get the item as shown in pictures. Please reference pictures for detailed view. Free Freight Shipping on item! Thanks for looking. Product Overview: Specification: Input Power: 208/230/460 Volts; Single Phase; 50/60 Hz Rated Output: 200 Amps; 28 VDC; 60% Duty Cycle: 250 Amps; 30 VDC; 40% Duty Cycle Output Range: 3- 310 Amps Dimensions(H X W X D) 46" X 28 1/2" X 40 1/2" Net Weight: 478 lbs. FYI- Our products are acquired from bankrupt. Downsized or defunct companies. Most items are pulled from their working environment and operation. Items are usually sold in the same condition that we receive them. If there are any known issues regarding the ... moreitem, we will certainly let you know. We do our best to take pictures of the actual item and anything included with the auction. If you don't see it in the picture or it is not listed in the description, it s probably not included. Never assume that it is included. If you have any questions, please feel free to email us at PLEASE CHECK OUR FEEDBACK RATING AND BID WITH CONFIDENCE. Thanks for Bidding and Good Luck! AUCTION TERMS: DUE TO EBAY’S NEW POLICIES. ALL INTERNATIONAL BUYERS OUTSIDE OF THE U.S.A. MUST GET PRE-APPROVAL TO BID. BIDS WITHOUT PRE-APPROVAL WILL BE CANCELLED. PAYMENT OPTIONS: We accept PAYPAL for all shipped purchases and Cash or Cashiers Checks for local pick ups from our San Francisco office. Payments must be received within 5 days. California residents pay 8.5% Sales Tax for San Francisco County. SHIPPING: Shipping and handling charges listed. Including auctions listed with free shipping are shipped via ground service within the contiguous 48 states in the US. Shipments to Alaska. Hawaii. And US Territories are higher so email us prior to bidding to get correct shipping costs. Oversized, heavy and delicate items are shipped on a pallet via a freight compa
|
|
Miller Syncrowave 250 DX Complete Pkg, AC/DC TIG and Stick, 200/230/460V 951117
Miller Syncrowave 250DX Complete Package. 200/230/460V Part# 951117 This listing is for a factory reconditioned unit with a full factory warranty Machine Overview: A light industrial machine great for precision metal fabrication. Maintenance and repair, and automotive fabrication. Processes include Stick. TIG, Pulsed TIG, and Air Carbon Arc(3/16 capable) Squarewave technology, Synco Start that allows Soft. Standard, or HOT TIG starts based on your application, and Digital Welding Meters for accuracy and repeatability. 3-310A range. 200A at 28 VAC, 60% Duty Cycle, 250A at 30 VAC 40% Duty Cycle. Complete Package includes Syncrowave 250 DX power source. Coolmate 3.5, and No. 37 running gear We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available at time of delivery. We are a welding ... moresupply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over 40 years. If you have any questions on this or any other welder. Just give us a call. Jodi 602 252-0341 or 602-396-1178 John 602 206-0571
|
|
MILLER MAXSTAR 200 DX DC TIG STICK WELDER MODEL 903701011 *FREE SHIPPING*
Up for auction is a MILLER MAXSTAR 200 DX DC TIG STICK WELDER MODEL 903701011 with free shipping in the lower 48 states! This is NOT a repair or refurb! It is in great working order. Ready for instant use. Comes as shown. If you have any questions about this auction please ask and good luck bidding.
|
|
MILLER DYNASTY DX-300 AC/DC TIG WELDER (COMPLETE SET)
Miller Dynasty DX-300 AC/DC TIG WELDER This item is a complete set. Ready to weld when received. The only thing that doesn't come with it. Is the gas and electrical power source. Miller Dynasty Comes with the following: Flow meter(NEW) Gas Hose( New) Ground cable and clamp(NEW) 17/12ftR Tig Torch(NEW) AK-2 TIG Torch kit(NEW) Foot control(NEW) Specifications Rated Output AC DC Volts 30 28 Amperes 250 200 D uty Cycle 40% 40% Max OCV 90 90 Input Volts 230/460 Hertz60 Phase KW Amperes 1 10.4 62.6/32.2 3 10.5 26.3/17.9. Amperage Range(5-300) Serial Number# KJ096837. Stock Number# 903519-01-1. ANY QUESTIONS ABOUT THE MILLER DYNASTY CALL GARY 216-905-9353)
|
|
Miller Syncrowave 250 DX TIGRunner 907194 Tig welder water cooled complete setup
Used. Miller Syncrowave 250 DX TIGRunner 907194 Tig welder water cooled complete setup… miller 250dx power supply with built in water cooler, weldtec#20 water cooled tig torch with 25'ft lead& cover, 12.5'ft ground lead& 300amp clamp, New smith argon#32-30-580 flow regulator with 8'ft hose, 23'ft 8/3 power cord installed(pre wired 230volt single phase) miller RFCS-14HD foot control… all in good condition, tested and works like it should… local pickup/free loading in long beach ca 90808… please email any questions 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14307da79a0-0xf3-
|
|
MILLER SYNCROWAVE 250 DX TIG RUNNER WELDER 951117 WITH LOTS OF EXTRAS
A QUANTITY OF ONE(1) MILLER SYNCROWAVE WITH ACCESSORIES. EXCELLENT CONDITION* NOTE: SOME ITEMS ARE SHOWN MULTIPLE TIMES IN CLOSEUPS. LIST BELOW IS EXACTLY WHAT YOU WILL RECEIVE. BUYER PAYS FOR ALL SHIPPING COSTS BUT WE WILL CRATE AND LOAD FOR FREE. Component List- Qty. 1 Miller Syncrowave 250DX With Runner Package And Speedway SW-418 25' 420A Water Cooled Welding Torch Qty. 2 Weldcraft 3" Cable Cover 22' Long With Zipper(WEM3-22) Qty. 1 Weldcraft 25' Rubber Water Hose(WEM41V32R) Qty. 4 Jackson NexGen Lens Retainer(15977) Qty. 4 Jackson Safety NexGen ADF Lens Kits 5 Outside& 2 Inside Qty. 1 Jackson Safety Ace of Spades Welding Helmet Qty. 2 Weld Helmets One Is Auto-Darkening With Spare Lens Qty. 3 Weldmark Stubby Nozzle Gaskets 2 Pack(WEM18CG20) Qty. 1 WeldTec H200 Handle(H200) Qty. 1 Tungsten Electrode Storage Tray Qty. ... more1 Weldmark 1/16" x 7" Tungsten Electrode Tray of 10(C2334) Qty. 1 Weldmark 3/32" x 7" Tungsten Electrode Tray of 7(6005317) Qty. 1 Miller Dinse Connection Kit(221322) Qty. 1 Smith HM2051A-580 BBB Regulator Qty. 1 Weldtec 25' Rubber Power Cable For SW-418 Torch(41V29HR) Qty. 1 Tillman Select Split Welding Gloves(1010) Qty. 1 Tech South PowerPoint Tungsten Grinder Qty. 1 Radnor Cover Plate(64005036) Qty. 2 Anchor Hardened Glass Gold Filter Plate(FS-3H-10) Qty. 3 Jackson Safety NexGen W60 Replacement Battery Package of 2(15984) Qty. 1 Miller Foot Control(194744) RFCS-14HD) Qty. 1 Jackson Safety 370 Replacement Headgear(1004338) Qty. 2 Weldmark 1/16" Collet Pack of 5(WEM10N23) Qty. 1 Weldtec SW-418 Handle(H200SW) Qty. 1 Weldmark 3AG7 Alumina Cups 9 Pieces Total(WEM54N15) Qty. 1 Weldmark 3A7 Alumina Cups 7 Pieces Total(WEM10N147) Qty. 1 Weldmark Black Long Cap Pack of 2(WEM57Y02) Qty. 2 Weldmark Black Short Cap Packs of 2(3 Total Pieces) WEM57Y04) Qty. 1 Weldmark 1/16" Gas Lens Pack of 2(WEM?V25) Qty. 1 Weldmark 1/16" Gas Lens Insulator Pack o
|
|
Miller Dynasty 300 DX TIG Runner 903841-01-1
Miller Dynasty 300 DX TIG Runner Before you bid contact me at logandarrick@gmail.com to explain my terms of the deal and for shipping quotes. Buy it now price: $2500 We bought this machine brand new $8.250.00 from Matheson Tri-Gas few years back. We only use this machine for tacking stainless steel and aluminum thin sheet material. As you see on the pictures it is in pristine conditions. No dings or scratches what so ever. Everything is in excellent working order. Believe it or not we only had 5:31 hours of arc time on the machine and 1.520 times that we stroke the arc. See the digital meter dial on pictures. Always kept the machine covered with a plastic at a corner of the shop and it's been about 10 months we didn't use. We are expanding and need the extra space. So no matter how much we love the machine it's time to let this ... morebaby go. Will include everything listed: See Pictures for Reference) 25 ft. Miller Diamondback TIG Torch 25 ft. TIG Torch Leads Protective Cover AK4C TIG Torch Accessory Kit Smith Gas Flow Regulator w/ Hose 15 ft. Work Lead RFCS 14 Miller Foot Remote Control 25 ft. cable Miller Coolmate 3 Miller Dynasty 300 DX unit Tig Runner Cart w/ Bottom Drawer Manuals
|
|
Miller Dynasty 200 DX TIG/STICK Welder, 120-460V Machine (907099011)
Miller Dynasty 200 DX 120-460 VAC TIG/STICK Welder Part# 907099011 Serial#MA460772L This listing is for a USED machine with no factory warranty. Machine has been tested by our Certified Miller service technician and operates to factory specification. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard Features include: Auto-Line Technology(any input voltage 115-460V with no manual linking) Extended AC Balance(30-99% AC Frequency Control(TIG and STICK AC Waveforms Variations(Advace Squarewave. Soft Squarewave, Sine, Triangular) Lift Arc Capabilities Smooth DC Welds Hot Start Stick capability Fan On Demand Excellent Portability Welding Amperage Range: TIG 115V = 5-150A AC. 1-150A DC/TIG 200-460V = 5-200A AC, 1-200A DC Includes: Power source. Primary power cable(no plug) and 2-50mm dinse ... moreconnectors. Shipping includes UPS Ground shipment to the Continental Unites States. Alaska and Hawaii available at an additional charge. No international shipping available at this time. Expedited shipping is available. Please call for details! We are a Welding Supply company that has been selling new/ used welders and welding supplies for over 40 years. If you have any questions. Just give us a call. Jodi 602 252-0341 or 602-908-7132 John 602 206-0571
|
|
Miller Syncrowave 250 DX Tig Welder w/ Cooler & Lots of Extras
Up for sell is a Used Miller Synchrowave 250 DX Tig Welder with Cooler. Item is in excellent operating condition and comes with over a $1.000 worth of extras(see photos) Included are several boxes of tig rods and tungsten electrodes as well as some other consumables. Phase- 1, Output Range Amps- 3 to 310, Rated Output- 200A@ 28VAC 60% Duty Cycle. 250A@ 30VAC 40% Duty Cycle, Duty Cycle 60% Input Amps- 110/96/48, Input Voltage- 230/460/575, OCV- 80, Hz- 60, Height- 49 in, Width- 22.5 in, Depth- 25 in Item is available for local pickup or the buyer is responsible for all shipping costs.
|
|
Miller Syncrowave 250 DX 907194-03-1 TIG Welder
Miller Syncowave 250DX 907194-03-1 Stick/Tig Welder. 230v Single Phase. We believe this to be in working condition; however, we are unable to test it due to power requirements. The overall dimensions are approx. 36"w x 41"d x 45"h and weighs approx. 500 pounds. TERMS: Sales tax of 8.00% will be added to all purchases unless you present a valid resale certificate at time of pickup. We require payment in full within two business days of the close of the auction. Payment can be made either through PayPal or at time of pick up with cash. Debit card, cashiers checks, Visa, MasterCard or American Express. Only the accessories or parts listed in the description are included. We are selling this item on behalf of a public school and do not have any knowledge about the item other than what is stated above. All item(s) are sold"as ... moreis" Please contact us if you would like to preview the item before bidding as we can not accept returns. If after you purchase an item and it is not as it was described please contact us first so we can try to adequately resolve the issue. We ask that you pick up your item(s) on either Monday or Tuesday following the auction close between the hours of 9:00am to 4:30pm at our facility located at 10022 Citrus Avenue Fontana, CA 92335. Any other arrangements must be made in advance by contacting us via email or by phone at 888-700-0523.
|
|
Miller Maxstar 200 LX Tig Stick (DX)
Miller Maxstar 200 LX. Item is used in great shape. Shows 77 hours on the Arc timer. A few scratches but well taken care of. Has all the features of the DX plus the Automation Interface. Maxstar 200 LX LX Model: With the Automation Interface Connector. The integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs, valid arc, pulse lock out, and end of weld sequence outputs. Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC. Single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit ... morevoltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters than traditional knobs and switches. HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination. Lift-Arc™ start provides TIG arc starting without use of high frequency. Programmable HF start parameters allows the operator to independently set HF starting conditions based upon electrode diameter and material thickness for each application. Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt. Dust, and debris, greatly improving reliability. LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amp
|
|
Miller Maxstar 200 DX AC/DC TIG Welder W/Cables and gun
Miller Maxstar 200 DX AC/DC TIG Welder W/Cables and gun YOU ARE BIDDING ON A Miller 200 DX IN EXCELLENT CONDITIONS"it comes as shown in the pictures" There is a 100% Money back guarantee if item is not as listed! FREE Shipping and handle just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE IN PICTURES ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL MY POLICES: P LEAS E SERIOUS& HONEST BUYERS ONLY! ALL ITEM MUST BE RETURN S WITHIN 4-5 days after received. If there any dissatisfaction with it. P lease contact us before any negative feedback, so that we can resolve the issue. MY GOAL IS TO HAVE A SATISFY CUSTOMER AT ALL TIMES. THANK YOU AND HAPPY BIDDING. The Maxstar‚® 200 Series features Auto-Line™ ... moretechnology. The most advanced inverter power management circuitry in the welding industry, allowing the end user to automatically connect to any input power, 120-460 volt, single- or three-phase. Built-in gas solenoid and HF means there are no additional accessories required. With 1-200 amps of welding output the Maxstar 200 Series provides the operator with superior low-end DC TIG or high-end DC Stick performance. Weighing in at 37 lb(16.8 kg) The Maxstar 200 is built to function dependably under the most demanding conditions. Features: SD- Basic features for TIG/Stick. DX- Provides full-function pulsing and sequence control. LX- Automation made simple. With the Automation Interface Control. The integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs; valid arc, pulse lock out, and end of weld sequence outputs. HF start provides non-contact arc starting. Adaptive Hot Start™ for Stick- Automatically increases output amerage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Lift-Arc™- Simply touch the tungsten to the work piece.lift.and the arc is initiated
|
|
Miller Dynasty 300 DX AC/DC TIG, Stick Welder
Lightly used. Well kept Miller Dynasty 300DX AC/DC TIG and Stick welder. Allows welding of a wide range of materials(including aluminum) and thicknesses. Includes owner's manual, regulator, ground clamp, stick lead, air cooled TIG torch, both a torch mounted hand control and a foot control(you can only use one or the other at a time, it is just a matter of preference, so you can try out each type and sell the one you do not like) This machine has not been used much and has only been used at low amps, usually around 10-100A, mostly 70-90A. I bought this machine new and have not used all the features of the machine, but the features I have used worked when I used them. I have used it in both single and three phase power modes. I have never used the 460V mode. The case still looks almost brand new. The only known issue with it is the LED ... moredisplay, which has the very top right segment of the left display missing(in the picture showing the left display with a number in it, the number should read 3.0 and you can see that one segment on the zero is missing) You probably will primarily be using the right display anyway most of the time. Shipping weight is 160lb and I will put on a skid and load on your truck freight carrier, or I can provide a quote for shipment by FedEx Freight. It will take a few days to prep for shipping.
|
|
Miller Dynasty 200 DX AC/DC TIG Welder Package w/Wireless Foot Control 951397
Miller Dynasty 200 DX Complete Package with Wireless Foot Control Miller Stock#951397. Serial no. ME180125L This listing is for a unit that was previously demonstrated by a Miller representative. It holds a full manufacturer warranty and is complete. Other than torch coolant. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard. Processes include: AC/DC Tig. Pulsed TIG, Stick, and Air Carbon Arc(5/32 inch maximum) Specifications: AC TIG Features Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. These models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. AC Waveforms: Advanced squarewave. Fast freezing puddle, deep penetration and fast travel speeds. ... moreSoft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. AC/DC Stick Features DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer. More penetrating electrodes like E6010. Hot Start™ adaptive control provides positive arc starts without sticking. Frequency control adds additional stability when Stick welding in AC for smoother welds. Other Features: Auto-line ™ allows for any input voltage hookup(115–460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Fan-On-Demand™ power source cooling system operates only when needed. Reducing noise, energy use and the amount of contaminants pulled through the machine. Lift-Arc™ start provides AC or DC arc initiation without the use of high f
|
|
Miller Dynasty 300 DX Tig Runner Welder
Well Cared For. Works Perfect. Contact Me If You Want To Try It Out. Local Pickup Only. $200 Paypal Non Refundable Deposit Due Within 24 Hrs. Balance Due At Pickup. No Returns. Welder Is For Sale Locally. I Reserve The Right To End The Auction At Any Time.
|
|
MILLER ELECTRIC SYNCROWAVE 250 DX TIG WELDING PACKAGE W/COOLER,TORCH,RUNNING GEA
MILLER ELECTRIC SYNCROWAVE 250 DX WELDING MACHINE PACKAGE GREAT TIG WELDING MACHINE ALSO WILL STICK WELD COMES COMPLETE WITH BUILT IN WATER COOLER. TIG TORCH, GROUND CLAMP AND CABLE ASSEMBLY, RUNNING GEAR. WITH POWER FACTOR CORRECTION IMPUT VOLTAGE IS 200/230/ OR 460 VOLTS SINGLE PHASE GUARANTEED TO BE A GOOD WORKING MACHINE WE WILL ADD MORE PICTURES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1477a734c4c-0x118-
|
|
MILLER MAXSTAR 200 DX TIG STICK WELDER FOOT PEDAL TORCH AND MORE EXTRAS BUNDLE.
UP FOR BID IS A MILLER MAXSTAR 200 TIG WELDER. THIS CAN BE USED AS TIG OR STICK. THIS WELDER HAS SOME SCRATCHES BUT OVER ALL IN GOOD SHAPE. I HAVE A RESALE SHOP AND I BOUGHT THIS FROM A GUY WHO HAD A SHOP BUT HE IS HAVING BACK SURGERY AND HE NEEDED THE MONEY. HE DID SHOW ME THIS UNIT WORKING AND IT WORKS GREAT. THIS ALSO COMES WITH A FOOT PEDAL AND A TORCH AND A COUPLE GROUND CABLES AND SOME DIFFERENT TIPS AND EVERYTHING U SEE IN THE PICS. IM STARTING THIS AUCTION LOW BUT I KNOW IT WILL BRING GOOD MONEY SO PLEASE DONT ASK ME TO TAKE A BUY IT NOW.THANKS AND GOOD LUCK.
|
|
Miller Syncrowave 250 DX 907194032 TIG Welder
For sale is a Miller Syncrowave 250 air-cooled TIG/stick welder that is 2 years old. Requires 230 power source. 250 amp machine. Outside shell of machine is in fairly rough condition, cosmetically, but the machine works great. Does not come with any cart, accessories, or water cooler, just strictly the power source. PLEASE BE AWARE: This item weighs nearly 400 lbs so shipping on this item would likely be fairly expensive but local pickup is available as well for anyone in the area or willing to drive. The shipping calculator for this item is wrong because it would not let me enter a weight of 400 lbs. This item, if shipped, would be shipped freight so I would have to get an estimate of shipping costs based on the buyers location and would then charge for shipping accordingly. Please contact me with any additional questions. 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1478ebe258b-0x112-
|
|
Dynasty 200 DX AC/DC TIG CONT Air-Cooled Package Foot Pedal 951174
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Comes with everything that is in the listing. Cart is also included. Untitled Document Dynasty® 200 DX Air-Cooled Package(Foot Pedal) 951174 Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line™ technology. Offering the most flexible AC/DC TIG/Stick power supply in the welding industry. The Dynasty® 200 DX combines size, weight and Autoline automatic input voltage sensing with world class arc performance. The Miller Dynasty® 200 DX TIG welder provides pulsed TIG welding along with the basic features that are required for most AC/DC TIG or STICK welding applications. Processes AC/DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications: Industrial to Heavy Industrial Apps, Petro/Chem Fabrication, Aerospace, Food/Beverage Industry, ... moreMechanical Contractors, Shipboard Installation/Repair, Dairy Industry Features DX- When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. AC TIG Features Blue Lightning™- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from.020- 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications. Custom settings are programmable. Extended AC Balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz)controls the width of the arc cone and the force of the arc. Advanced AC Waveforms DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018
|
|
Miller Syncrowave 250 DX 903276 STICK/TIG Welder
This Miller Syncrowave 250 air cooled TIG/STICK welder comes with: 32 ft. stick welding cable. 15 ft.ground cable 16 ft. power source cable 20 ft.TIG foot control 25 ft. TIG GUN I have a welder cart with room for cutting torch and hose and gas bottle available that I will list separately if desired. It is not included in this sale. This item weighs around 500 lbs as listed so I cannot put a shipping quote on here. It will depend on where you are located. I will ship motor freight and I can give an approximate quote when contacted. This can be a local pickup and you can test run the machine at that time. I have had this welder about 5 years and I doubt that has been used as much as 10 hours total. Very nice condition. Never been abused. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147ccc831c8-0x112-
|
|
Miller Dynasty 200 DX Tig Welder 907099-01 / Foot Pedal / Regulator & Flow Meter
Like New Miller Dynasty 200 DX Tig/Stick Welder Serial Number: LF229994 Stock/Model Number 907099-01 Not Included In Sale: No tig torch OR attachement/Plug included(Better finding one to your applcation) No power plug included 115v/230v/400v/460v applicable(Better finding one for your application) No cooler included[some sell with cooler for a"Complete set" Check my listing. Have coolmate 3 115v for sale aswell can sell both together. Send TEXT offers to(716)997-5968 Included In Sale: Unit Itself Miller Dynasty 200 DX Prestine Cosmetic/Mechanical Condition[Model: 907099-01] Ground cable with connector to unit and clasp for your metal- Miller Foot Pedal[Model: RFXS-14HD] Oxweld Type R 6007 661 Regulator and[flowmeter Linde L32] Airco Gauge# 8410091- Unit free shipping NO Warranty. Bid with confidence. you're not getting anymore ... moreor any less all sales are final. PLEASE VEIW PICTURES CAREFULLY AND ASK A QUESTION IF YOU HAVE ONE. Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. Extended AC balance(30-99% controls the amount of oxide cleaning(amperage
|
|
Miller Dynasty 300 DX Tig Runner Welder 300DX 200DX Tigrunner Coolmate Cooler
Miller Dynasty 300DX TigRunner Welder with Cool Mate Cooler This is a used welding machine in working condition. It was just calibrated in January of this year. This welder was used at a local fabrication business that recently closed their doors. This is the Tig Runner package and includes the Miller CoolMate TIG torch cooler. The leads and water-cooled torch are included(torch has no collets installed) The Miller cart is welded to a larger cart. Everything seen in the pictures are included in the sale. This machine can be used as a"stick" welder or TIG welder. It can be connected to 3 phase or single phase power which is great for small shops. It has adjustable AC and DC current with high frequency AC available. It is very versatile machine that can be used to stick weld steel. TIG weld anodized aluminum, and everything in between. ... moreThis machine is the standard for welding boat T-tops. Towers, leaning posts, and other anodized aluminum piping. The high amperage and high frequency AC is critical for this type of welding. If you have any questions. Call me at(910) 547-7302 We will offer a 14-day warranty to insure this welder meets your expectations. We have a 100% satisfaction rating. So buy with confidence! Thanks! PS- Check out our eBay Store for the other items up for sale: http:stores.ebay.com/LiquidAddictionMarine
|
|
Miller Syncrowave 250 DX 903765 TIG Welder FREE SHIPPING
FREE CRATING AND SHIPPING! INCLUDES WELDER FOOT PEDAL TIG TORCH TORCH COOLANT CHILLER REGULATOR ADD YOUR GAS BOTTLE AND ITS READY TO GO. CAN BE CONFIGURED FOR 230V OR 460V CAME FROM OUR PROTOTYPE DEPARTMENT. WE DON'T NEED A TIG ANYMORE. SELLING TO PURCHASE AN ALUMINUM MIG.
|
|
MILLER DYNASTY 200 DX AC/DC TIG w/ Foot Control contractors Kit excellent shap
This miller dx 200 dynasty was used for 1 project which was a aluminum sports wheelchair and have not used it since. This unit works flawlessly and is the top of the line unit. Everything you see in photos is what comes with the unit. The Miller Dynasty 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- ... moreHigh Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG)
|
|
Miller Syncrowave 250 DX Tig Welder with Tig Runner Cooling System
Miller Syncrowave 250 DX Tig Welder with tigrunner cooling system for sale. Located in Rincon. GA. Works good! We had a professional senior welder test the welder and it performed very well. Asking $3.000 with no accessories. We have a couple more in our warehouse if you need more than one. Please contact us if you have any questions or if you would like to see the welder. Compare to $6.000 for a new one from Miller! Cash only. Can deliver locally. No trades. NO WARRANTY- SOLD AS IS
|
|
Miller Dynasty 300 DX Tig Runner Welder & Coolmate Cooler 043007
I'm selling it AS-IS. The welder does not work. I don't know what wrong with it. The coolmate is in working condition. If you want it shipped hire your owner shipping company and I'll have it pallet ready for pick up. Contact me if you have any questions.
|
|
Miller Syncrowave 250 DX Tigrunner W/Pulser COMPLETE PACKAGE TIG 200/230/460V
The Syncrowave® 250DX welder is an exceptional single-phase. TIG/Stick power source designed for the master welding craftsman. When the work demands the arc control of Squarewave technology, premium performance and the highest levels of efficiency and functionality, the Syncrowave® 250DX meets the challenge. At 250 A, 34 V, 40% duty cycle, you can control your level of productivity. This machine is used and offered for sale by the original owner because we have upgraded it to a Dynasty 350. This unit works great and recently had the coolant pump replaced. This auction includes: Syncrowave 250 DX Tigrunner 903765-01-1 on factory running gear with integral cooler and optional Pulser upgrade. Input power cable(appx 25 ft) Outer casing damaged and wrapped with tape about 4 ft. out from machine but wires are intact. Foot Pedal WP-17 ... moreWater-cooled torch with cable cover. 25 ft, less than 100 hours on torch. 15 ft. Ground Cable With Heavy Duty Ground Clamp Regulator and gas hose Owner's Manual Willing to sell without some/all accessories at a discount. Inquire if interested. Local pickup welcome. Machine can be viewed under power in Roseville, MI if desired. $50 handling fee to palletize and load on common carrier freight. We are able to set up common carrier freight and include it in your purchase price. But the buyer is responsible for the additional fees imposed by eBay on the cost of the freight(we would still give you a quote for approval) No international shipping. Machine Specs: Processes: AC/DC TIG(GTAW) Stick(SMAW) Pulsed AC/DC TIG(GTAW) Input Power: 220v Single Phase Rated Output: 250A@ 30 VAC. 40% Duty Cycle/ 200A@ 28 VAC, 60% Duty Cycle Welding Amperage: 3-310 Amps Features: Syncro Start for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on vario
|
|
MILLER DYNASTY 200 DX AC/DC TIG-STICK Arc WELDER 110/120V -208/240V
Purchased used on Ebay. Up for sale for upgraded model. No issues with this unit. Welds on AC with perfect beads on.25 aluminum. Welds perfect on DC. No cables or plug with unit.
|
|
Miller Dynasty 200 DX Stick & Tig Welder 110/120V and 208/240 Electric
Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords for 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
|
|
MILLER DYNASTY 200 DX AC/DC TIG / STICK W/FOOT Contractor KIT
This is A Miller Dynasty 200 DX it is used. I have welded with this machine about 8 times I am not a welder. I wanted to learn so I purchase this machine, and a new welding helmet, Arc one auto darkaning top of the line very nice! I also have the Contractor Kit with foot peddle, everything like new see photos
|
|
|