|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
$11.30 Shipping Condition: For parts or not working Location: Greer, United States Rear Panel Complete with Fan and Circuit breaker assembly and Sanrex WK-4917 board. Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder ... morePN A-404. Need a circuit board or part for your machine?.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Need a circuit board or part for your machine?. May need repair and are ... moresold for parts or not working.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Need a circuit board or part for your machine?.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Need a circuit board or part for your machine?. May need repair and are ... moresold for parts or not working. All parts are sold as is and have not been tested.
Buy It Now
$300.00 Shipping Condition: Used Location: Brookpark, United States Processes: AC GTAW (TIG), DC GTAW (TIG), SMAW (STICK). Rated Output: 300A @ 32V, 60% Duty Cycle.
Buy It Now
$144.27 Shipping Condition: Used Location: Fairfield, United States Working welder in good condition. Comes with foot pedal. 230v plug.
Buy It Now
Condition: Used Location: Cedarburg, United States Miller 24V Constant Speed Wire Feeder. Miller Arc Welding Power Source. SPEC'S SUBJECT TO FINAL INSPECTION.
Buy It Now
Condition: Used Location: Middlebury, United States Duty Cycle: 60% @ 300A. Length of Power Cord: 17' No Plug. Prefer to pick it up yourself?. Warehouse Location: NA7011. Need it urgently?. Call us and ... morewe will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Lebanon, United States New Tig Torch. Foot Pedal. Grounding Clamp. Input 208/230/460 Single Phase.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Need a circuit board or part for your machine?. Burn marks on the front ... moreand back side. This board is know to be non-functional.
Buy It Now
Condition: Used Location: Clare, United States Model: TIG 300. Lincoln AC/DC welding power source. Power Source Input: 208/230/460v. Condition: Good working.
Buy It Now
Condition: For parts or not working Location: Williamsburg, United States For sale is a used Airco 300 Amp AC/DC HeliWelder V Square Wave Power Source. W e have no way to test it. We’ve priced it assuming it’s for parts or repair. ... moreStorage: Blue B 50.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. One of the bus bars may have a current sensor attached. All parts are ... moresold as is and have not been tested.
Buy It Now
Free Shipping Condition: Used Location: Clinton Township, United States Capacity: 10kg (22lbs) 18" Rods. Range: 150 Celsius / 300 Fahrenheit Max.
Buy It Now
Condition: Used Location: San Diego, United States Miller Arc Welding Power Source.
Buy It Now
Free Shipping Condition: New Location: Dallas, United States Fits Lincoln all 200D, 300D with Kubota engine only, SAE 300 & 300 HE. This is a current sensor, NOT an idler board.
Buy It Now
Free Shipping Condition: New Location: Somerset, United States ARC-300 Portable Mini Electric ARC Welding Machine IGBT Inverter Welder 110V. Advanced IGBT technology, ensures a stable and large power welding work. ... moreHigh frequency inverter, features quick arcing and less welding splash.
Buy It Now
Condition: Used Location: Glassboro, United States Model: Cyber-Wave 300S. MPN: Cyber-Wave 300S. Small orders are no problem. Your Best Work Starts Here™. Be sure to add us to yourfavorites list ! Lot# ... more13489 PILGRIM.
Buy It Now
Condition: Used Location: Middlebury, United States Model: Syncrowave 300. Wired: 230. Duty Cycle: 60%. Size: Length: 55 in. Width: 36 in. Height: 65 in. Prefer to pick it up yourself?. To get a freight ... morequote we will need to know the following.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States ARC-300 Portable Mini Electric ARC Welding Machine IGBT Inverter Welder 110V. Advanced IGBT technology, ensures a stable and large power welding work. ... moreHigh frequency inverter, features quick arcing and less welding splash.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Welding tongs. Grounding clip. Electrical phase: single phase 110V. Function type: manual welding machine. Electric welding machine. 5 welding rods. Rated ... moreoutput current: 110A. Color: Black AND YELLOW.
Buy It Now
Condition: Used Location: Glassboro, United States 856-881-3185 SKU: AGV200 Idealarc AC/DC Arc Welder 230/460V 0693 AC-307942 TM-300/300. Brand: Idealarc Condition: Used Model: TM-300/300 Lot# AGV200 w2 ... moreWe strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 7:30 AM- 4:30 PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:00 pm EST, to speak with a Customer Service representative who can help you with any questions regarding
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Advanced IGBT technology, ensures a stable and large power welding work. High frequency inverter, features quick arcing and less welding splash. Inverter ... moreenergy saving, first-class energy saving.
Buy It Now
Free Shipping Condition: New Location: Somerset, United States ARC-300 Portable Mini Electric ARC Welding Machine IGBT Inverter Welder 110V. Advanced IGBT technology, ensures a stable and large power welding work. ... moreHigh frequency inverter, features quick arcing and less welding splash.
Buy It Now
$140.00 Shipping Condition: Used Location: Bullard, United States The welder is used and shows it. The welder will not feed a wire machine, stick welds as it should.
Buy It Now
Condition: Used Location: Coffeyville, United States SUBARC WELDING. 1250A @ 44V. 300A @ 32V. POWER SOURCE. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. AC/DC 1000.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States This welding wire produces stable arc action, low spatter, less welding smoke, excellent welding process properties, no hole seam. Certification of TÜV ... more& CSA Witness Laboratory PATENTED DASH-ARC TECHNOLOGY: The unique DASH-ARC technology patent improve arc striking speed from 200ms to 40ms, 99.99% arc striking success rate, which improve welding efficiency and get better welding results.
Buy It Now
Free Shipping Condition: New Location: Somerset, United States Advanced IGBT technology, ensures a stable and large power welding work. High frequency inverter, features quick arcing and less welding splash. Inverter ... moreenergy saving, first-class energy saving. 1 × welding machine set.
Buy It Now
$11.30 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. All parts are sold as is and have not been tested. Need a circuit board ... moreor part for your machine?.
Buy It Now
$10.44 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Need a circuit board or part for your machine?.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when ... morein small welding current. DIGITAL IGBT INVERTER TECHNOLOGY.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
$75.47 Shipping Condition: New – Open box Location: Concord, United States 【Portable and Support】With a compact design and easy-carry handle, this welder is perfect for use anywhere you need it.
Buy It Now
Condition: Used Location: Buffalo, United States Input: 575VAC 26.7A 15.4KVA 8.9kW 1Ph 60Hz Output: 32VAC 300A 25VDC 200A. This item is used and in working condition. Check-Out Now!
Buy It Now
Free Shipping Condition: New Location: El Monte, United States [300A arc welding machine kit includes]: 1 x MMA welding machine, 1 x folding welding cap, 1 x welding brush, 1 x welding grounding wire, 1 x hex wrench, ... more1 x 10-25 quick plug assembly, and 1 x instructions to help you complete various DIY welding machine projects.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Condition: Used Location: New Ipswich, United States Idealarc Tig300 300 ACDC Welder with Bernard 3 gallon Cooler. Manufacturer Idealarc.
Buy It Now
Free Shipping Condition: New Location: Edison, United States Welding tongs. Grounding clip. Item TypeMini Welder (ARC welding). Welder Industrial ClassLight. Electrical phase: single phase 110V. Function type: manual ... morewelding machine. Electric welding machine. 5 welding rods.
Buy It Now
$11.30 Shipping Condition: For parts or not working Location: Greer, United States Argon Inert Gas fitting RH Argon x 1/4 Pipe Thread,MIG wire,TIG welder PN A-404. Argon Gas Solenoid assembly with front panel and rear panel fitting and ... moresnap rings, gas hose. May need repair and are sold for parts or not working.
Buy It Now
$8.00 Shipping Condition: New Location: Monroe Township, United States Specifications Model: Wrc-300a Color: Green Style: Modern Plug Type: Us Standard Assembly Required: Yes Mount Type: Free Standing Power Source: Corded ... moreElectric Motor Type: Single-phase Ac Motor Material: Carbon Steel, Brass, Aluminum Foil Protection Level: Ip21 Voltage: 110v / 60hz Motor Power: 370w Cooling Power: 1.5kw(1 L/35.19 Oz/Min) Maximum Pressure: 0.4mpa Water Tank Capacity: 18l/4.8gal Flow Rate: 7-9l/Min/1.8-2.4gal/Min Operating Temperature Range: -20~60 ℃/-4~140℉ Lift: 32m/105ft Power Cord Length: 3.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Free Shipping Condition: New Location: Portland, United States 300Amp Arc Welder, IGBT Inverter Welder. [300A arc welding machine kit includes]: 1 x MMA welding machine, 1 x folding welding cap, 1 x welding brush, ... more1 x welding grounding wire, 1 x hex wrench, 1 x 10-25 quick plug assembly, and 1 x instructions to help you complete various DIY welding machine projects.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The primary purpose of the Dynasty 300 with CV is so that the unit may be paired up with a Suitcase Feeder such as the ArcReach 8 or 12 and used for high-output ... morewire feeding (MIG). • Dynasty 300 Power Source.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Condition: Used Location: Eldred, United States Syncrowave 250. Miller Water-cooled TIG Welder AC/DC Power Source w/o Cooler. I have welded steel, stainless steel, cast aluminum, aluminum and Titanium ... morewith this welder. good working unit.
Buy It Now
Free Shipping Condition: New Location: United States - **Power supply voltage:** AC110V - **Output current:** 20-250A - **No load loss:** 60W - **Rated input current:** 43A - **Frequency:** 50/60Hz - **No ... moreload voltage:** 62V - **Rated output voltage:** 28V - **Power factor:** 0.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Advanced IGBT technology, ensures a stable and large power welding work. High frequency inverter, features quick arcing and less welding splash. Inverter ... moreenergy saving, first-class energy saving.
Buy It Now
Free Shipping Condition: New Location: Oakland, United States Soldadora potente capaz de soldar acero dulce, acero para soldar, acero inoxidable y hierro fundido.
Buy It Now
Condition: Used Location: Sussex, United States Condition: This welder is used and in working condition. It shows wear from use and storage. Phone Number 8:30 am - 6:30 pm EST. Office Hours.
Buy It Now
Free Shipping Condition: New Location: Prudhoe Bay, United States [300A arc welding machine kit includes]: 1 x MMA welding machine, 1 x folding welding cap, 1 x welding brush, 1 x welding grounding wire, 1 x hex wrench, ... more1 x 10-25 quick plug assembly, and 1 x instructions to help you complete various DIY welding machine projects.
Buy It Now
Free Shipping Condition: New Location: Edison, United States Efficient and energy-saving: Adopting IGBT inverter technology, the welding machine has higher power utilization and energy efficiency ratio, while reducing ... moreenergy consumption. Welding tongs. Grounding clip.
Buy It Now
Free Shipping Condition: New Location: La Crescent, United States Series : FLQ. Type : Midget Fuse. Material : Spiral Wound Fiber.
Buy It Now
Free Shipping Condition: New Location: Hawthorne, United States Máquina de Soldar Inverter 110V: Soldadora Portátil MMA con Pantalla LCD Digital - Ideal para Principiantes, Entusiastas del DIY y Proyectos de Soldadura ... morePequeños. Descubre la potencia y versatilidad de nuestraMáquina de Soldar Inverter 110V, la herramienta perfecta para tus proyectos de soldadura.
Buy It Now
Condition: For parts or not working Location: Cincinnati, United States CONDITION: This Welder Does Not Work. It is for Parts Only. Model Dynasty 300 DX, S/N LF316706, New 2006. Rated Weld Output 250 A AC, 200 A DC. Current ... moreType AC / DC. Input Frequency 60 Hz.
Buy It Now
Free Shipping Condition: New Location: Edison, United States Efficient and energy-saving: Adopting IGBT inverter technology, the welding machine has higher power utilization and energy efficiency ratio, while reducing ... moreenergy consumption. Welding tongs. Grounding clip.
Buy It Now
Free Shipping Condition: New Location: Houston, United States · Advanced IGBT technology, ensures a stable and large power welding work. · High frequency inverter, features quick arcing and less welding splash. · ... moreInverter energy saving, first-class energy saving.
Buy It Now
Condition: Used Location: Clare, United States Model: TIG 300. Lincoln AC/DC welding power source. Power Source Input: 208/230/460v. Condition: Good working.
Buy It Now
Condition: New – Open box Location: Kaukauna, United States This is an ideal welder for aluminum, stainless, and nickel materials where arc performance is critical. This welder can be used on single or three phase ... morepower and carries a 100 percent duty cycle at 300 amp output.
|
|
lincoln idealarc Tig 300/300 variable Voltage AC/DC welder
Used Lincoln Idealarc Welder AC/DC TIG 300/300. Lincoln Cooling system included. No Tig Gun. Located at Attleboro. Ma Local Pick up or Shipping on Skid LTL or Additional Shipping Charges for delivery on our truck.
|
|
Miller Shopmaster 300 CC/CV AC/DC Welder Stick, MIG, TIG on Single Phase Power!
Are you looking for one machine that can Stick. MIG, and TIG AC/DC on Single Phase Power? If so. This Shopmaster 300 is the answer! Call us at 404-736-6494 with any questions or to get a shipping quote. Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) Complete with: Miller Shopmaster 300 AC/DC CC/CV Power Source Miller Wire Feeder MIG Gun Ground Lead Stick Lead TIG Torch Flowmeter Hose Features: Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Lift-Arc™ start provides TIG arc starting without the use of high frequency. LVC™ Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± ... more10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication Maintenance and Repair Light Manufacturing Heavy Manufacturing Aerospace Shipbuilding Tube and Pipe Vocational Specifications Input Power Requires 1-Phase Power Runs on 230 or 460 Volt Rated Output 250 A at 34 VAC. 40% Duty Cycle 200 A at 32 VAC. 60% Duty Cycle Welding Amperage Range 3- 310 Amps Net Weight 496 lb(225 kg)
|
|
LINCOLN IDEALARC TIG 300/300 VARIABLE VOLTAGE AC/DC ARC WELDER
USED Lincoln Idealarc variable voltage AC/DC welder TIG 300/300 Miller cooling system Includes TIG gun. See pictures for further details Please note this item is off site in Circleville OH Zip 43113. This item is local pick up only. If you send your own truck we can assist in loading. The item will be secured to a pallet- total weight is approx. 1100 lbs. Please contact us to arrange pickup time and the location address. Your feedback will be left after we receive feedback from you. This way we know you have received the items and that you are happy with them and the service that you received. Feel free to email any questions you may have. Please check out my other items. The Parts Room LLC specializes in new and used surplus industrial equipment and parts. The Parts Room LLC is not a representative of any manufacturer listed; all names. ... moreLogos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. The Parts Room is not liable for any products sold; the customer is responsible for proper testing. Installation and use of equipment purchased. We aim to give the best customer service possible. If you are unhappy with any purchase please contact us and we will make it right. All our items are covered under our no hassle 14 day return policy unless stated otherwise. Ohio residents add 7% sales tax. Loc:No. 2 warehouse
|
|
Lincoln Ideal Arc Welder Model TIG 300/300 AC /DC Arc Welder
Normal 0 false false false EN-US X-NONE X-NONE This is a used Ideal Arc Lincoln Welder Model Tig 300/300. Vintage but a good welder. Input single phase. Volts 220/440, Amps 10.4, cycle 60. Model 300/300. Code-No 5319-CH Model AC 200502. The welder is 40 ½ inches tall, 26 inches wide and the depth is 28 inches. Also comes with Argon tank. This welder was used in a one man machine shop. So it was not used all the time. PICK UP ON SITE ONLY. I have nothing here on site to help load. USED and SOLD AS IS US ONLY PAYPAL.
|
|
Miller Syncrowave 300 (S) AC/DC Arc Welding Power Source, Z-539
You are bidding on a Miller Syncrowave 300(S) AC/DC Arc Welding Power Source Specifications Input Power 1-Phase Power Rated Output 350 A at 34 VAC. 40% Duty Cycle 300 A at 32 VAC. 60% Duty Cycle Welding Amperage Range 3- 400 Amps No Accessories We believe this unit is in good working condition but since we are unable to test it directly we are selling it"as is" Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked ... moreup by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that it is damaged, take pictures and notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible da
|
|
Hobart G310 gas powered welder generator ac/dc 300 amp
You are looking at a Hobart G310 welder generator. This welder has a 4 cylinder jeep gas engine. It also has a 10.000 watt generator. It starts and runs good. It welds good as well. It comes with the leads shown. The tires are almost nex! I bought this welder at a auction to resell. It is a ac/dc machine. A competitor to the Lincoln sa 200. This is for sale on my lot as well. I reserve the right to end at anytime. I will NOT take Pay pal for payment. Any questions or to stop and look at Call 419-258-0293 I will load for shipping If buyer pays and arranges all shipping cost. Pick up almost any day except saturday. Payment is due within 7 days of auction end. Ohio residents must pay 7% sales tax. Unless excemption forms are signed. I am offering a 7 day walkaway guarantee.meaning- If you come within 7 days of auction end and find its not as ... moredescribed.You dont have to take it. Once it leaves my property it then becomes an as is sale. Payment at pick up or cashiers.Company check is preferred. I will not take pay pal for the full amount. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
EXCELLENT COND MILLER SYNCROWAVE 300 PACKAGE AC/DC WELDER w/COOLER AND FOOT CONT
MILLER SYNCROWAVE 300 PACKAGE AC/DC ARC WELDING POWER SOURCE w/ MILLER 1A COOLING SYSTEM AND FOOT CONTROL MANY PROGRAM OPTIONS INSTALLED INCLUDING PULSER BOARD MSRP$941 ALONE THIS UNIT JUST CAME IN FROM LAS VEGAS IT IS THE CLEANEST 300 I HAVE SEEN. THE INSIDES ARE IMMACULATE AND UNIT SEEMS TO HAVE BEEN BARELY USED IT HAS ALL THE BELLS AND WHISTLES INCLUDING THE PULSER BOARD AND SPOT TIMER UNIT HAS PROPERTY OF U.S. GOVERNMENT ON IT.WHICH USUALLY MEANS IT WAS USED ONCE AND STORED IF YOU LIKE SYNCROWAVES THIS PACKAGE IS IN GREAT CONDITION AND HAS THE EXTRAS, GREAT SHOP ADDITION WILL WELD ANY METAL OR METAL ALLOY FERROUS OR NON FERROUS call or text Jeremiah 310 293 0615 Description DO YOUR FORUM RESEARCH THIS IS A HIGHLY PRIZED AND SMOOTH AC/DC TIG MACHINE THAT IS UP THERE WITH AND IN MOST AREAS SURPASSES ANY OF THE INVERTER IT FEATURES SQUARE ... moreWAVE TECHNOLOGY FOR CLEAN STACKED ALUMINUM WELDS UNIT IS IN GREAT WORKING CONDITION SINGLE PHASE UNIT THAT WILL PROVIDE YEARS OF SERVICE AS IT IS TRANSFORMER TYPE MACHINE AND EASIER TO MAINTAIN Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in working condition. Model# Syncrowave 300 Features: Master Craftsman's Choice- Syncrowave 300 provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands. MILLER COOLANT System. Miller Foot Pedal. TORCH STAND TEXT FOR PHOTOS I HAVE LARGE GAS BOTTLES AVAILABLE FOR SALE $200 EMPTY $290 FULL I HAVE OTHER WELDERS AND WELDING EQUIPMENT CALL OR TEXT applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dim
|
|
Miller 300 amp Shopmaster AC/DC CC/CV welding Machine
This is a true Multi process power unit and can perform TIG-Heli-arc)Mig-wire)ARC-stick) welding since it has the CC/CV power source. It is currently set up for Tig and would need electrode holder to perform ARC welding and a wire feeder/gun to perform MIG welding. It is on a very heavy duty rolling cart that holds 2 full size cylinders. It comes with a 25' long TIG torch that has leather protective covering for full length. It has a 14' Ground cable with new solid brass ground clamp, it has a 28' power cord to allow for tremendous flexibility in moving around a shop area or project. It has the Miller CoolMate coolant recirculator/chiller, and the Miller High Frequency Unit, it comes with thumb control on torch as well as foot control. Everything works on this machine it is single phase and I have been using it with 60 amp breaker ... morewith no problems. You can weld pretty much any type of metal made with proper welding rods. This is not some foreign made piece of junk, this is true commercial quality made in America. I have ability to load machine on truck or trailer but shipping and or palleting is not included in price. If you need assistance on shipping I will gladly assist for additional $, and would consider delivery to reasonable radius of Guntersville, Ala. There are no known problems with welder and or accessories. I have three welders and need to open up some shop space and generate money for new project. Posted with
|
|
LINDE HDA 300 AC DC WELDER WITH LEADS COOLANT TANK
this linde hda 300 welder where I got it was unhooked the man was moving to FL and I was told this is working 100% I don't have a way to test this where it's at so it's being sold as is as found,it's in very nice shape well used he took care of his tools,you are getting all the leads and coolant tank,if you are looking at this you know what this work horse can do,this is a pick up only,if you need this to come to you please ask before bidding for cost,and no more then 80 miles from zip 13036 Central Square NY,also ask anything you need to know before bidding,thank you sold as found, ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f3ae75264-0x103-
|
|
LINCOLN IDEALARC TIG 300/300 AC/DC TIG / STICK WELDING WELDER
LINCOLN IDEALARC TIG 300/300 AC/DC TIG/ STICK WELDING WELDER Includes New 400 Amp TIG Torch. New Foot Pedal, Ground Cable& Clamp, Flowmeter& Hose, and Running Gear. Ready to Weld; Just add gas! Guaranteed in good working condition! Loaded to manufacturer specs. Bid a bunch! Specifications: Serial: AC-865986 Code: 9902C Input: 208/230/460V; 91/82/41A; 60Hz Output: 300A@ 32V. 60% Duty Cycle; 80 Max OCV Features: 5 Setting Current Range Selector Afterflow Timer Weld Mode Switch(Inert Gas Mode or Stick Mode) Soft Start On/Off Switch Spark On/Off Switch
|
|
LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM
aims LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by the Lincoln Electric Co. of Cleveland. Ohio. This is a used Idealarc Variable Voltage AC/DC Arc Welding Power Source with Bernard Cooling System in working condition. Model# TIG-300/300 Serial# AC-635451 Code# 9104-C Retails for over $6.500.00! Specifications: Input: Voltage: 208/ 230/ 460 Volts Amperes: 91/ 82/ 41 Amps Hertz: 60 Phase: Single. Output: Amperes: 300 Amps AC/DC Volts: 32 Volts Duty Cycle: 60% Maximum O.C.V. 80. General: Overall Dimensions: 33" x 60" x 45" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable ... moreTool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM Reliable Tool Inc. c 2011 | Powered by
|
|
Miller Syncrowave 300 Package AC/DC Welder w/Cooler & Foot Control
Miller Syncrowave 300 Package AC/DC Welder w/Cooler& Foot Control- SOLD AS SEEN IN PICTURES! Unit is very clean! Looks new! The insides are immaculate and it seems to have barely used. Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in. Model# Syncrowave 300 applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dimensions: 58" x 27" x 67" tall ubidonline Item Number: ... more0 613-48 AR You are bidding on( 1) Miller Syncrowave 300. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER PICK
|
|
airco 300 amperes ac/dc tig welding machine . USED
This posting is for a AIRCO- 300 AMPERES AC/DC TIG WELDING MACHINE. THIS MACHINE COMES WITH THE HELIUM TANK. THE MACHINE IS IN GOOD WORKING CONDITION. For any questions please call at 347-499-6660 Price can be negotiable! This is final sales. Sold as is, what you see is what you get! WE ALSO ACCEPT LOCAL PICKUPS! please be free to contact me at anytime at 347-499-6660 or e-mail me. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13fb89a0431-0xff-
|
|
A94488 Miller Syncrowave 300 AC/DC Arc Welding Power Source, 13.6 kW, 26.5 kVA
A94488 Miller Syncrowave 300 AC/DC Arc Welding Power Source. 13.6 kW, 26.5 kVA(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# A94488 This Miller Syncrowave 300 AC/DC Arc Welding Power Source. 13.6 kW, 26.5 kVA looks to be in decent cosmetic condition with signs of wear and previous use. The current control knob seems loose, and needs adjusting or replacing. I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 32*23*47. See pictures for more details. You will receive as shown. No other accessories are included. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item ... moredescription. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 742.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to
|
|
Welder Lincoln TM 300/300 AC/DC
As you can see. It was used very little. It comes just as you see it, everything works good and shows little wear. I don`t think you will find one like this in this good condition.Good Luck Bidding! I will ship to you using a freight company(Pilot freight gives me the best deal) or you can pick it up or for a fee I can bring it up to 300 miles. Thanks ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13fd381c681-0xf9-
|
|
Miller Syncrowave 300 AC/DC Gas Tungsten-Arc/Shielded Inv.26696
Miller Syncrowave 300 AC/DC Tungsten Arc Welder Serial Number JF855631 Tungsten Arc or Shielded Metal Arc Welder Dual Welding Range 5-70 and 15-375 Amps AC/DC Primary: 200(208)230/460 Volt Single Phasse 106/96/48 Amp. 60 Hz. 13.8 KW 23.6 KVA Secondary: 32 Volts 300 Amp 60% Duty Cycle 50 Max O.C.V. Comes with gun. Ground cable and chiller as shown Chiller is a Bernard 2500SS 115Volt Single Phase 2 Gallon Capacity(Inv.18602) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $50; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. ... moreThis is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sa
|
|
THERMAL ARC 300 GTSW TIG & Arc AC/DC Welder, For parts or not working
THERMAL ARC 300 GTSW#1 aluminum welding only weight 50 LBS 300 amperes For parts or not working.
|
|
(5886-FC) MAGNA-TRAN 300 amp AC/DC inert arc welder
Recent tech school excess. 300 amp, I have 2- one has cables as shown please email a request as to the cables before purchaase, good casters. I have no way to test230/460. 3 phase. 500 lb. freight collect. For freight shipments, email ZIP for shipping quote, UPS/USPS shipping cost is shown above. If you are not entirely satisfied, you may return the item prepaid within 14 days for a refund of purchase price, less any shipping. NO HANDLING CHARGE. We appreciate the business, please CHECK OUR OTHER AUCTIONS, we try to add 20 per day. Method of payment: Paypal. I’ll be happy to answer any questions, my cell is 770-307-6221(Doug) call anytime up to 11:00 PM, EST. If you get a recording, please leave a message and I WILL call you back. If you have any questions about pricing, please call instead of email. Now please, be prepared to pay immediately ... morethru Paypal if bidding. We try to ship at least twice a week and pack well, but you know UPS. If it arrives damaged, do not accept it and notify the driver immediately. We will file claim when they notify us. Freight claims will be between the buyer and their carrier. If you have a problem with your purchase, please contact us immediately before flying into feedback and Ebay claims. We have yet to have a dissatisfied customer when we were contacted first and the problem was in any way our liability. WE have a 7 day no question ask return policy(except as-is items) and sometimes adjustments are made in the field at our option. RETURNS: Eligible items must be returned prepaid within 7 days, in original condition for refund of original purchase price, exclud FREIGHT:Freight items are considered customer pick. If you choose to have a truck line, please have your carrier FAX a Bill of Laden to 770-867-4990 and give us 24 hrs. notice of pickup at 770-867-6804. The unit(s)will be shrink wrapped and strapped to a pallet(no charge) the estimated weight is given in the description, unless stated otherwise. Call if you have any questions We have loading facilities and our addres
|
|
Miller Syncrowave 300 Package TIG AC/DC Welder w/Cooler & Foot Control
Miller Syncrowave 300 Package TIG AC/DC Welder w/Cooler& Foot Control- SOLD AS SEEN IN PICTURES! Unit is very clean! Looks new! The insides are immaculate and it seems to have barely used. Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in. Model# Syncrowave 300 applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dimensions: 58" x 27" x 67" tall ubidonline Item Number: ... more0 613-48 AR You are bidding on( 1) Miller Syncrowave 300. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER
|
|
Lincoln Arc Welder Idealarc TIG-300/300 Variable Voltage AC/DC Power Source
Lincoln Arc Welder Idealarc TIG-300/300 Variable Voltage AC/DC Power Source Good Working Condition Sold as shown in the pictures. Nothing else is included except what is shown. ONLY WELDER One of the knobs is missing as shown in the pictures. Shipping weight is 719 lbs with pallet. Please email for shipping quote prior to bidding. LOCAL PICK UP IS WELCOME- CASH PAYMENT ONLY FOR PICK UP WE ACCEPT CERTIFIED CHECK or U.S. PAYPAL. PAYPAL: We only accept Paypal payments from U.S. verified accounts with confirmed addresses. NO EXCEPTIONS P.O. BOXES: FedEx and our trucking companies WILL NOT deliver to PO Boxes. The shipping price shown in the auction is for FedEx shipments to a physical address. If your“confirmed” Paypal address is a PO Box. You will need to contact us for a shipping quote VIA USPS delivery. If you are picking up an item you cannot ... moremake payment with Paypal. These items are sensitive electronic components. We use the utmost care during packaging. PICK UP FEES: We welcome scheduled pick ups at our location. There is a $7 per item fee. You have 10 days from the end of the auction to pickup an item. Items remaining in our possession after 10 days will be assessed a warehousing fee of $2.00 per day. Whether or not the item is paid for. DAMAGE CLAIMS: Damage to merchandise during shipping MUST be reported to us immediately upon discovery. ALL ORIGINAL PACKAGING MATERIALS MUST BE SAVED and submitted at time of pickup or inspection. We require a signature as proof of delivery on all FedEx shipments. If you are NOT going to be available to sign for the parcel. It will be your responsibility to arrange receipt of the item. Any item returned to us as“non-deliverable” Will require additional money for re-shipment. We do NOT bill shipments to recipients or third party account. PLEASE NOTE: We are auctions by: gilco4020. Gilco4030, gilco4040, gilco4050, gilco4070. We are an ebay auction company specializing in computers. Laptops, network components, printers and other high end electronics. We strive to maintai
|
|
MILLER DYNASTY DX-300 AC/DC TIG WELDER (COMPLETE SET)
Miller Dynasty DX-300 AC/DC TIG WELDER This item is a complete set. Ready to weld when received. The only thing that doesn't come with it. Is the gas and electrical power source. Miller Dynasty Comes with the following: Flow meter(NEW) Gas Hose( New) Ground cable and clamp(NEW) 17/12ftR Tig Torch(NEW) AK-2 TIG Torch kit(NEW) Foot control(NEW) Specifications Rated Output AC DC Volts 30 28 Amperes 250 200 D uty Cycle 40% 40% Max OCV 90 90 Input Volts 230/460 Hertz60 Phase KW Amperes 1 10.4 62.6/32.2 3 10.5 26.3/17.9. Amperage Range(5-300) Serial Number# KJ096837. Stock Number# 903519-01-1. ANY QUESTIONS ABOUT THE MILLER DYNASTY CALL GARY 216-905-9353)
|
|
Miller Shopmaster 300 Multi-process Stick, MIG, AC/DC TIG Welder
This machine will do Stick. MIG, and AC/DC TIG on Singe Phase Power. Email for shipping rates. We can palletize and load from a commercial location. Includes wire feeder& gun. Stick and TIG Leads! Single-phase AC/DC multiprocess power source that provides versatility and outstanding arc performance in CV mode(MIG) and CC mode(Stick and TIG) Weld MIG. TIG and Stick with one versatile machine. The price of a Shopmate 300 DX is roughly half the cost of buying individual MIG. TIG and Stick welding equipment. Single Process Selector Switch is"operator-friendly" Eliminates confusion caused by several switch combinations; making setup and operation easy. Large. Analogue digital meters enable the operator to preset weld voltage in CV mode and amperage in CC mode before striking an arc. Arc control adjusts inductance to optimize MIG ... morearc performance. Or Dig control for Stick. Stackable design can save valuable classroom or workshop space. Line voltage compensation keeps output power constant even if input power varies plus or minus 10% Built-in 14-pin connector provides quick. Direct connection for 14-pin 24 VAC Miller wire feeders and accessories. operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Input Power Requires 1- phase power(primary power cord not included) Rated Output 250 Amps at 30 VDC. 60% duty cycle, 300 Amps at 32 VDC. 40% duty cycle, Voltage Range(CV Mode) 10-35 VDC/AC, Amperage Range(CC Mode) 5-400 A, Max. Open-Circuit Voltage 80 VDC Net Weight 477 lb(80.3 kg) 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141a9b12ece-0xff-
|
|
OFFER&WIN - DAIHEN AVP-300 AC DC WELDING INVERTER
OFFER& WIN WE GUARANTEE THE LOWEST PRICES If You Find This Item At Lower Prices Than Ours, We Promise To Sell It Cheaper Than That Which You Have Found. ITEM FOR SALE: DAIHEN AVP-300 AC DC WELDING INVERTER USED Item pictures- Please be assured that when you buy more than one item they might not look the same as the one in the picture above. Warranty- You have 7 days warranty from time you receive the device to check if it is fully functional. If it's not we'll send you another unit or make a full refund. Delivery time- Using UPS it takes about 2-7 working days but sometimes it might be longer. It depends where we should send your item. If the device doesn't arrive on time please check if your order is already on your post office otherwise please inform us. Shipping price- We can send this item worldwide with UPS. The prices ... moreare following: Items to North America will be shipped by registered priority airmail: 300 $ Customers from Europe. South and Middle America, Asia, Africa, Australia and Oceania: Please send me Your zip code so I could tell You the price of the shipment. Return policy- If device doesn't work please inform us about it. There is always a positive way to finishing transaction before you leave a negative or neutral feedback. You may choose full refund or faulty item exchange(we pay for shipments) If you don't accept the package from the carrier we'll have to charge you for shipping. Our policy- Please do not ask us to low-down the value of the invoice. It's against our policy. Broker fee- If you're from outside the UE. It may happen that you'll have to pay a broker fee. It depends on the item and it's cost. Important! Please open package in the presence of the carrier/transporter to make sure that the item is ok and it's not crushed. Other way we'll not pay for any damages! All customers from EU who are not owners of European VAT number and are willing to make an offer should be aware that their offer will be countered with additional 23% of their
|
|
MILLER SHOPMASTER 300 AC/DC CC/CV WELDING POWER SOURCE
SERIAL: KB048471 INPUT: 200/230/460 VOLTS. SINGLE-PHASE, AMPS: 107/93/46, SET FOR 460 INPUT OUTPUT: DC/ 300A AT 32V. 50% DUTY CYCLE CC OR CV AC/ 200A AT 28V. 40% DUTY CYCLE WEIGHT: 370 POUNDS DIMENSIONS: 20 X 28 X 31 INCHES- DOES NOT HAVE PLUG ON PRIMARY CABLE. CUSTOMIZE FOR YOUR SHOP VOLTAGE AND RECEPTACLE Seller is an authorized repair and warranty service center for all major welding brands. All machines have been thoroughly checked out and/or repaired and are in good working order. Please see other welding equipment by the same seller! tag 470A.
|
|
Miller Shopmaster 300 AC/DC 230v Stick welder *Works Great*
This is a Miller 300 Shopmaster Stick MIG/TIG welder. It is 240 v single phase and it works great. The lead cords are 25 feet long. The power cord is almost 26 feet long. If you have any questions about this welder please feel fee to email or message me and I will get back to you thanks
|
|
MILLER SYNCROWAVE 300 AC/DC TIG WELDER (Machine Only)
This welder has been tested by a Miller Shop and is ready to weld. If you have any questions or need a shipping quote call 678-986-3318. We will palletize and load free of charge. Email for a shipping quote. Miller Syncrowave® 300 Complete The Syncrowave® 300 TIG welder is an exceptional single-phase. TIG/Stick power source designed for the master welding craftsman. When the work demands the arc control of Squarewave technology, premium performance and the highest levels of efficiency and functionality, the Syncrowave® 300 meets the challenge. At 300 A, 34 V, 40% duty cycle, you can control your level of productivity. Processes AC/DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Heavy Industrial Applications Precision Metal Fabrication Maintenance and Repair Light Manufacturing Heavy Manufacturing Aerospace Shipbuilding ... moreTube and Pipe Vocational Features: Syncro Start for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys. And helps eliminate tungsten spitting and arc rectification. Dual digital meters allows for quick and easy viewing of actual and preset values of amperage and voltage. Built-in preflow and postflow provides 0- 10 seconds of preflow and 0- 50 seconds of postflow. Built-in cable hangers on both sides conveniently fold out of power supply to allow all weld cables to be neatly stored. To prevent torch or cable damage. NEMA Class 1 Rating Fan-On-Demand- Internal power source cooling system that only works when needed. Keeping internal components cleaner. LVC Line Voltage Compensation- Keeps output of the power source constant regardless of fluctuation in input power ± 10% Hot Start- Used on some Stick(SMAW) machines to make it easier to start difficult-to-start electrodes. Used for arc starting only.
|
|
Airco TIG 300 amp AC/DC Welder 1 Phase 208 / 230 / 460V
This was our laboratory welder for many years. It is best used when you have to create top quality welds. This unit also comes with an arc head and an arc gouger head. The tig tip is water cooled and I have the pedal. I have the cover gas manifold for it as well. This unit can be shipped but I am listing it as pick up only since I haven't a clue on how much shipping will cost. The cart that it is sitting on is not for sale. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14366390eb3-0x101-
|
|
Miller Shopmaster 300 AC/DC Welder low hours one owner, tig,mig,welder 200/230
what i have for sale is ONE miller 300 shopmaster welder with a miller 22A 24v wire feeder and leads it tigs and wire welds this is a low hour and a one owner unit. This unit was in a vocational school welding class and was well then care of, school changed welders over to lincoln welders i was told buy the director that the welder was 3 years old.it any questions call 502 817 5495 we have more welders but have sold some locally. we have the right to end this auction at anytime for this unit is for sale locally too. I WILL SKID AND DROP AT A SHIPPERS DOCK WITHIN THE 40299 ZIP FREE OR YOU CAN PICK UP thanks again
|
|
CHEMETRON AC/DC 300 HF WELDER TIG WELDER POWER SUPPLY
Can be picked up locally or be loaded on your truck.
|
|
LINCOLN IDEALARC TIG 300/300 AC/DC ARC WELDER with Water cooler
Dont like the price MAKE ME AN OFFER For larger picture click above SHIPPING CLAIMS ARE NOT A REASON TO LEAVE NEGATIVE FEEDBACK! LINCOLN IDEALARC TIG 300/300 AC/DC ARC WELDER with Water cooler WILL SHIP WITHOUT ISSUE Lincoln idealarc tig. Big 300 amp output AC/DC output high frequency start Was completely checked. Cleaned, brand new amptrol plug was installed, used maybe 6 times since then, was a backup machine Very nice machine. Just sits covered up. Fully factory optioned with power correction capacitors Single Phase aka will work on big amp 220v house power. As well as single phase commercial power up to 460v Volts: 208 230 460 At 300 AMP. 32 VOLT DC OUTPUT Comes the factory metal foot pedal. Not the cheap tin or plastic like the recent tigs Water cooler. Dyna flux style i believe 3 gallon cooler, uprated motor and newer procon pump, needs ... morea through cleaning from sitting. Also come with water cooled tig torch. Well used Also added on remote tig switch. Just simple on off push button mounted to torch. Spare just not used enough to keep. Clearing out some of my stock as i go through it. Will be sold along with many other parts and extras more items in other auctions. Click to see my other auctions Shipping is available or Local Pickup APPROX freight shipping quotes based on that APPROX weight a few terminal to terminal. Use for APPROX costs $200 Kansas City. St Louis, Wichita $275 Denver. Dallas, Detroit, Houston, OKC, Chicago $350 LAX. New Orleans, San Antonio, Salt Lake City Items shipped out once a week only. MAY take up to 10 days to get out. Cash upon pickup. Paypal NO personal checks please. I only take payments in US dollars, USD only. BASIC item Packaging and Handling includes box fees. NONE FREIGHT shipments. FREE: total with shipping end up UNDER $100 $5.00: total with shipping end up over $100 $15.00: total with shipping end up over $250 $25.00: total with shipping end up over $500 $40.00: total with shipping end up over $1000 Winning bidder to make contact with me within 3 days of auction w
|
|
Airco 300 AC – DC Square Wave Welder
Airco 300 AC– DC Square Wave Welder Airco 300 AC– DC Square Wave Welder. Model# 300, Code# 0806, Serial# MH208086, Stock# 13410290: This is a pre- owned Airco 300 AC– DC Square Wave Welder that is in below average physical condition. This Airco 300 AC– DC Square Wave Welder is manufactured as a large. Rectangular Airco 300 AC– DC Square Wave Welder which has a vertical type of appearance. This Airco 300 AC– DC Square Wave Welder is mounted to a couple of sets of industrial wheels. These bottom wheels allow the Welder to be moved around from place to place. There is an informational label on this Airco 300 AC– DC Square Wave Welder which provides some information. The information provided on this label is as follows: Input Info: Volts = 208/230/460. Amps = 110/100/50, KVA = 23.0, KW = 14.0, Freq = 60 Hz, Single Phase. Output Info: Amps = 300/ ... more300. Volts = 32/32, Duty Cycle% = 60/60, Max OCV = 80/80, Welding Range = 5-375/ 5-375. All of The Features. Controls, Connections, Other Components Contained on this Airco 300 AC– DC Square Wave Welder appear to be in average to below average physical shape. The seller has provided several photos of this Airco 300 AC– DC Square Wave Welder(from several different positions& angles) which displays the majority of the Airco Square Wave Welder’s external features, controls, connections, devices, mechanisms, other components which are contained on it. Please view all of this auction listing’s included photos in order to view all of the features. Controls, connections, mechanisms, devices, other components contained on this Airco 300 AC– DC Square Wave Welder. This Airco 300 AC– DC Square Wave Welder is being sold exactly how it is displayed in the provided photographs. This Airco 300 AC– DC Square Wave Welder has a hard wired FC-IV Foot Control/ Pedal– see photos. This Airco 300 AC– DC Square Wave Welder one very thick cable extending out from its back side– see photos. This Airco 300 AC– DC Square Wave Welder has several hard wired
|
|
Airco 300 AC-DC Square Wave Single Phase Industrial Welder w/ Rolling Base
Search our eBay Store! Airco 300 AC-DC Square Wave Single Phase Industrial Welder w/ Rolling Base SKU: JV-MAT-A-AIRCO300ACDC Condition: Used Packaging: Pallet/Skid Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Airco 300 AC-DC Square Wave Single Phase Industrial Welder w/ Rolling Base Model: 300 AC-DC Square Wave Dimensions(L”xW”xH” 58.5*30*59.5(including base) As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple ... morequantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC
|
|
Miller Aerowave 300 CC-AC/DC Hybrid Arc Welding TIG Welder - Parts/Repair
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 1719538 A: 0013000000CXCfg O: 0065000000PTQyF PA: View Photo Gallery. Calculate Shipping. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Miller Aerowave 300 CC-AC/DC Hybrid Arc Welding Power Supply TIG Welder- Parts/Repair. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Miller Model: Aerowave 300 ... moreType: CC-AC/DC Hybrid Arc Welding Power Supply Serial No: KE647307 Hours: 12199 hours shown on working meter Features/Specifications: Processes: TIG Input: 200/230/460V- 60 Hz(1PH) 12.8KW- 72/62/31A(3PH) 12.8KW- 41/36/18A Rated Output: NEMA Class I: 30V- 250A- 60% Duty Cycle- 90 Max. OCV NEMA Class II: 32V- 300A- 40% Duty Cycle- 90 Max. OCV GFS Inc. power control switch Includes cables& clamp. As shown(no other accessories are included) Dimensions: Machine: L 33" x W 22" x H 43" Shipping Weight: 450 lbs Condition: Not functional- this machine was dropped on it's side and is now not working. We do not know the nature of the problems it may have Otherwise. Unit shows normal to light wear for age& from previous use in working industrial environment(one leg is bent- still stands) Note: The"Pulses Per Second" knob is missing from the front panel(see photos) When bidding. Please consider this machine to be for parts or repair only Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(includin
|
|
Lincoln Idealarc Welder Tig-300/300 Ac/dc Arc Welder Water Cooled Torch Tip
Lincoln Idealarc Welder Tig-300/300 Ac/dc Arc Welder Water Cooled Torch Tip Metal cover for front included(not pictured) Water cooled*brand new water cooled torch set-up- torch stays extremely cooled! Local pickup from corona. Ca or Santa Ana, ca. Any question please call 951 4448065 Posted with
|
|
hobart ac-dc arc-tig 300 amp w/hi-freq single phase model # adi-364
Hobart AC-Dc Arc-Tig 300 Amp w/Hi-freq single Phase Model# ADI-364 foot pedal included Argon Tank.Tig torch and leads for arc welding
|
|
Airco Pulser attachment for 300 AC DC tig
I bought this welder from a friends dad. I am selling the pulser because I do not need it or even know how to use it. I listed it as pick up only but will ship it. I did not pull it off the welder yet but will do so and get a weight for shipping. I have seen a couple of these go for near $300 so I listed it for $250 bin. If you want to estimate shipping. I would guess it to be 70 to 80 lbs. It is probably lighter. It is 24 x 8 x 6. Auction is for the pulser only. I would like to keep the welder.
|
|
Miller 330A/BP C.C. 300 Amp AC/DC Tig Stick Welder Aluminum or Steel INV=14008
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Miller Model 330A/BP Constant Current Arc Welder. Niller stock No.901041, Serial No.JH228571. Comes with foot pedal, ground clamp, tig torch and the cable and wire shown in the photographs. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability ... moreto comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no
|
|
lincoln idealarc AC/DC 300 /300 tig and arc welder single phase
Lincoln 300/300 TIG welder single phase came from a school has plug and pedal no torch or leads pick up or shipping from Spur Tx 79370 Thanks and check out my other auctions
|
|
Miller shopmaster 300 stick mig ac/dc tig welder, HF-251D-1 arc starter, cooler,
Miller Shopmaster 300 arc. Mig, ac/dc tig welder. It also comes with a HF-251D-1 Arc starter, S-21E wire feeder with a Tregaskiss gun with a brand new liner, Bernard water cooler with a freshly rebuilt procon pump, water cooled 25' tig torch with a thumb slide control, and a non water cooled tig torch, and all the cables and hoses needed to make this a complet unit. The welder turns on and will weld but doesn’t seem to weld properly. A welding friend looked at it and seems to think it is putting out ac volts when welding in dc with the wire feeder. This welder is sold AS IS NO MONEY BACK. I was needing to do a project and another friend sold me his welder before I had time to fix this one. Now I have the other welder I no longer need this one. I will palletize and deliver up to 30 miles to a freight company or you can pick up locally. ... moreRcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-145510e919a-0x11a-
|
|
P&H AC/DC water cooled Arc Welder 300 HF with cart, foot control pedal and guns!
This is a nice welder that has low hours. It has been in storage for 25 years and belonged to a family member that owned a machine shop. It has not been overhauled or messed with in any way. Just a good dusting to show the condition. I will help load it on a truck for free and help you arrange shipping but it will be at your cost. Happy bidding!
|
|
Miller Shopmaster 300 AC/DC Multi Purpose Welder on Rolling Cart - Low Hrs- Used
The City of Appleton. Wisconsin is offering this item for sale and the item is being sold in as-is condition. The City of Appleton will not assume any liability on the equipment after the sale. The successful bidder should be prepared to arrange for pick up of this item. As shipping is not offered. Pickup times are 8:00 a.m. 3:30 p.m. Mon-Fri. Payment must be made in full by cash or cashiers check at time of pick up. Or Paypal in advance. The successful bidder must also pay 5% Wisconsin sales tax on items picked up at our location or produce a valid tax-exempt certificate. ADDITIONAL DESCRIPTION: Miller Shopmaster 300 AC/DC Welder on a rolling cart Capable of MIG. TIG(Heli Arc) and Stick welding Miller S-22P12 Wire Feeder HF-251D-1 high frequency starter for the Heli Arc Single phase 200/230/460 volt 60 hertz 105/91.2/45.6 amps All hoses ... moreand cables are in place for the MIG and TIG welder Gas bottle platform holds two cylinders(not incl. Manuals are included Welder is in good working condition with low hours of use KNOWN DEFECTS: No holder for the stick welder If you have any questions about this item feel free to contact us via e-mail or you can call 920.832.1559. Questions will be answered Monday– Friday during normal business hours. Thank you for your interest. In accordance with current eBay policies regarding shill bidding. Employees of the City of Appleton are prohibited from bidding on this item.
|
|
CHEMETRON AC/DC 300 HF WELDER TIG / STICK WELDER
Used Chemtron Tig/ Stick Welder on cart. This was our shop welder, works good but we got a new MIG and use it now, so don't need this one anymore. 300 Amp Used Chemtron Tig/ Stick Welder. Model AC/DC 300 HF, High Frequency Variable Control, Low-Medium-High Settings, Cart With Casters Prefer local pick up. Will ship LTL, but contact me with zip code for freight quote rob@wabashvalleymotor.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-145963557cc-0x102-
|
|
Hobart Cyber-Wave CW-300-S AC/DC TIG Stick Welder Welding Machine with 100A &
Up for Bid is a Hobart Cyber-Wave CW-300-S AC/DC TIG Stick Welder Welding Machine with 100A Programmer! I don't have a torch or gun for this. So you will need to find your own. Foot Control is included. Input Voltage: 200/230/460/575(3-Phase) As you can see. The previous owner cut the end of the power cord, so you will need to wire on your own plug, when you receive it. This was removed from Government Surplus. It appears to be in good physical condition. Please refer to pictures for more details. I do not have the ability to test it. So I am selling it AS-IS. I can ship this to a Commercial location(with forklift or loading dock) for $250. If you need lift-gate delivery at your Commercial location. There may be an extra charge. If you want it shipped to a Residential address. Please contact me for a personal Freight Quote.
|
|
Lincoln TIG-300/300 Welder 1980's AC/DC Welder Excellent Condition! Works Great
Listed here is a 1980's Lincoln TIG-300/300 welder. This machine has worked well in our shop for a few years. We upgraded to a newer machine and this is now this welding machine is extra. The welding machine is very clean. It was purchased new by a school and used just a few days a year. I got it from the school in 2010. And we have used it very little since then. There in NO TIG torch with this welder! All hoses are there. This is a very soild machine that has not given us any problems. This welding machine will stick weld. Although there are no welding leads included with the machine. Manual is included. This item is LOCAL PICKUP ONLY. No shipping! Zip code is 46342(Hobart. IN) Thanks for looking and or bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1462351c8fd-0x115-
|
|
MILLER SYNCROWAVE 300 AC/DC TIG WELDER COMPLETE PACKAGE WATER COOLED
This Miller Syncrowave 300 AC/DC TIG Welder is ready to weld and includes everything listed below. All you need to add is gas and tungsten! Call us at 404-736-6494 with any questions or to get a freightquote. Syncrowave 300 Complete Syncrowave 300 power source Water Cooler Cart RFC-14 Remote foot control 25 ft(7.6 m) Air-cooled TIG torch 25 ft(4.6 m) work lead w/clamp Gas hose Regulator/flowmeter Cable cover, Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) HF Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. features adjustable penetration and cleaning action while increasing arc stability on various ... morealuminum alloys. And helps eliminate tungsten spitting and arc rectification. Digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage. operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. start provides TIG arc starting without the use of high frequency. keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication, Maintenance and Repair, Light Manufacturing, Heavy Manufacturing, Aerospace, Shipbuilding, Tube and Pipe, Vocational, Specifications Input Power Requires 1-Phase Power, Runs on 230 or 460 Volt, Rated Output 300 A at 34 VAC. 40% Duty Cycle, 250 A at 32 VAC. 60% Duty Cycle, Welding Amperage Range 3- 330 Amps, Net Weight 496 lb(225 kg)
|
|
Westinghouse TIG 300 AC/DC ARC Weld
Great working condition with Miller Coolmate with foot pedal and torch.
|
|
Miller Dynasty 300 DX AC/DC TIG, Stick Welder
Lightly used. Well kept Miller Dynasty 300DX AC/DC TIG and Stick welder. Allows welding of a wide range of materials(including aluminum) and thicknesses. Includes owner's manual, regulator, ground clamp, stick lead, air cooled TIG torch, both a torch mounted hand control and a foot control(you can only use one or the other at a time, it is just a matter of preference, so you can try out each type and sell the one you do not like) This machine has not been used much and has only been used at low amps, usually around 10-100A, mostly 70-90A. I bought this machine new and have not used all the features of the machine, but the features I have used worked when I used them. I have used it in both single and three phase power modes. I have never used the 460V mode. The case still looks almost brand new. The only known issue with it is the LED ... moredisplay, which has the very top right segment of the left display missing(in the picture showing the left display with a number in it, the number should read 3.0 and you can see that one segment on the zero is missing) You probably will primarily be using the right display anyway most of the time. Shipping weight is 160lb and I will put on a skid and load on your truck freight carrier, or I can provide a quote for shipment by FedEx Freight. It will take a few days to prep for shipping.
|
|
MILLER SHOPMASTER 300 Multi-process Stick, MIG, AC/DC TIG Welder LOW HOURS
Here I have a nice gently used Miller Shopmaster 300 up for auction. PLEASE CLEARLY READ THIS ENTIRE DESCRIPTION Please ask any questionS. I will be travelING from 7/11 thru 7/20. However I will try to respond to any and all questions in a timely manner. If you use Buy It Now we will have to arrange for pickup after I get back from traveling. I purchased this item through a silent auction when the company i worked for went out of business. This machine was purchased new and was used in a plastic R&D molding shop. This was only used for minor repairs to small pieces of equipment. The TIG was only used because the guy in charge of it tried to learn how to TIG weld with it. Other than that the TIG equipment and accessories have not been used. The ARC welding portion and accessories were used maybe 6 times and that is it. The main use of ... morethe machine was the MIG portion and accessories, but very little. The unit still has the original spool of wire on it that it came with. I wanted this item to put in my garage/ workshop at home. I have limited space and have decided to sell this unit and purchase a smaller Miller 110 TIG welder. I will help with the loading of this welder to the best of my ability. I will not ship this item. If you want to have a trucking company pic it up at your expense I am OK with that and I will help were/when needed. The item must be paid for before I will put this welder in anyone's possession. I am honest and fair and I expect that the highest bidder will be/do the same. There are no returns on this item so please look at the pics and know what your are bidding on. This package comes with everything in the pics. There are extra extensions for almost everything. The purpose of this was to allow the welder to reach across the entire shop. Also included is a oxygen/acetylene cart with Harris valves and a cut off torch with long hoses. I am not sure what the technical names for all the pieces are therefore please only bid on this item if you are fully aware of what this machine is and wha
|
|
Miller Welding Machine Shopmaster 300 AC/DC Power Source
Miller Shopmaster 300 AC/DC Welding Machine Weld MIG. TIG and Stick with one versatile machine. The price of a Shopmaster 300 AC/DC is roughly half the cost of buying individual MIG, TIG and Stick welding equipment. Single Process Selector Switch is"operator-friendly" Eliminates confusion caused by several switch combinations; making setup and operation easy. Square Wave TIG™ allows AC/DC TIG for steel and aluminum. Large. Dual meters enable the operator to preset weld voltage in CV mode and amperage in CC mode before striking an arc. optional) Arc control adjusts inductance to optimize MIG arc performance. Or Dig control for Stick. Stackable design can save valuable classroom or workshop space. Line voltage compensation keeps output power constant even if input power varies plus or minus 10% Built-in 10-pin connector for direct ... morehookup of Spoolmatic® 15A or 30A spool guns. Built-in 14-pin connector provides quick. Direct connection for 14-pin 24 VAC Miller wire feeders and accessories. Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine Specifications Input Power Requires 1- phase power Rated Output 250 Amps at 30 VDC. 60% duty cycle 300 Amps at 32 VDC. 40% duty cycle Voltage Range(CV Mode) 10-35 VDC Amperage Range(CC Mode) 5-400 A Max. Open-Circuit Voltage 80 VDC Net Weight 177 lb(80.3 kg) Local pick up only. New Iberia. Louisiana
|
|
NICE! Miller Shopmaster 300 Welder -AC/DC Welding Power Source CC/CV SHOP MASTER
INTERNATIONAL SHIPPING WELCOME! DESCRIPTION PRICED TO SELL! DON'T MISS THIS DEAL! NICE! Miller Shopmaster 300 Welder- AC/DC Welding Power Source CC/CV Here's a nice Miller Shopmaster 300 Welder. It's in full working condition! It hasn't been abused and hasn't been used much either. I just sold my other one on eBay. See my sales history for more information. When paying retail price. This item will cost you $4500.00-$5000.00 including all taxes and shipping costs. They're available on eBay from $2000- $3500.00 USED- check for yourself! Mine is available for less than half price. And is the cheapest on the website! It was NEVER part of a rental business. THIS DEAL WILL GO FAST! DON'T MISS THIS DEAL! THIS ITEM IS HIGHLY DISCOUNTED AND PRICED TO SELL! CLICK BUY IT NOW& GET IT NOW BEFORE IT'S GONE! If you ever ... morehave an issue or are unhappy with your order please contact me so that I can help. SHIPPING DETAILS INTERNATIONAL SHIPPING WELCOME! Free Local Pickup in Fort Lauderdale. FL Shipping cost is marked below Please contact me for exact international shipping quote I usually ship daily- However. In some situations- item can be shipped within 72 hours of payment time(business days) Payment Details Winning bidder must pay within 48 hours of auction end time(unless you contact me in advance for an extension) PAYPAL. Wire Transfer& CASH are ACCEPTED- RETURNS Returns are accepted within 14 days! All items are sold as pictured in as is condition. ADDITIONAL INFORMATION What you see in the pics is exactly
|
|
LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER WITH TWECO COOLING SYSTEM
THIS AUCTION IS FOR A USED LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER. SINGLE PHASE VOLTAGE! $$$PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS OR SHIPPING QUOTE$$$$ EQUIPPED: TWECO COOLING SYSTEMS TIG TORCH WITH 25FT HOSES WITH LEATHERS. FOOT CONTROL. F EEL FREE TO ASK ANY QUESTIONS! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Lincoln Idealarc AC/DC Arc Welder TM-300/300
This was my grandfather's welder. Its in good shape and works well. The cables are useable but could be better. Shipping is on the buyer but will assist in crating when sold.
|
|
Lincoln Idealarc TIG 300/300 AC DC Welder Tig Heliarc Welder 300 Amp
Lincoln Idealarc TIG 300/300 AC/DC Welder. Complete water cooled system. I've had this for over ten years. And welded aluminum, stainless steel. Carbon steel, monel, pipe, structural, etc. weld stick or tig. Smooth arc and very user friendly controls. Tig torch.Tweco stinger, leads, hoses, ground clamp, foot pedal, flow meter, Dynaflux water cooler. I can load the whole unit onto your truck or trailer. No shipping.Local pick-up only Thanks for looking.
|
|
MIller shopmaster 300 AC/DC CC/CV True multiprocess welder Tig, Mig, ALUMINUM
Up for auction is my miller shopmaster multiprocess welding power source. This machine is capable of mig. Tig and stick welding. This is a single phase unit and will run on 208/230 460/575 volts. This welder is a multiprocess machine that produces AC(YES. THIS TIG WELDS ALUMINUM) and DC(EVERYTHING ELSE) current as well as Constant Current(STICK AND TIG) and Constant Voltage(MIG/WIREFEED WELDING) This machine is an Industrial welder and has been used as such by me. They don't make these anymore and now it takes 2 machines to have all the processes of this ONE MACHINE. This welder is 100% functional and well maintained by me for the last several years. It comes complete with a custom cart that I built several years ago. Featuring a dual cylinder rack and racks for your tig welding wire tubes(holds 3 tubes) as well as 2 levels for your attachments(both ... moreremovable) ATTACHMENTS REQUIRED FOR THE PROCESS YOU DESIRE OTHER THAN STICK WELDING. I WILL INCLUDE A 25FT GROUND LEAD AND A 25FT LEAD WITH STINGER FOR STICK WELDING IN THIS SALE At just $1.500 this is a steal! Get it now before they are all gone! for more info give me a call Chris(603)486-8275 CASH TALKS! PICK UP IN PERSON IS BEST. BUT IF DESIRED I CAN STRAP THIS TO A PALLET AND SHIP IT AT YOUR EXPENSE. YOU ARE RESPONSIBLE FOR FREIGHT ARRANGEMENTS. I WILL PROVIDE STRAPPING IT TO A PALLET AND FORKLIFT SERVICE ON MY END MUST BE PAID IN FULL.PAYPAL ACCEPTED FOR FULL PAYMENT
|
|
Miller Shopmaster 300 Multi-Process Stick, MIG, AC/DC Welder Wire Feed Power Set
Up for sale is a Miller Shopmaster 300 welder. This machine will do Stick. MIG, TIG on Single Phase power so you only need one machine to do it all. This is a serious welding machine that is clean, has very new stick and ground leads, extra long power cord, functions good and is ready to go tank and all. Unit Comes Complete as Pictured: Shopmaster 300 AC/DC Power Source Shop Cart with bottle rack Miller S-22A Wire Feeder& Tweco Mig Gun Ground Lead Stick Lead Tank(empty) Flowmeter& Shielding Gas Hose Shopmaster 300 AC/DC Single-phase AC/DC multi-process power source that provides versatility and outstanding arc performance in CV mode(MIG) and CC mode(Stick and TIG) Weld MIG. TIG and Stick with one versatile machine. The price of a Shopmaster 300 AC/DC is roughly half the cost of buying individual MIG. TIG and Stick welding equipment. ... moreSingle Process Selector Switch is"operator-friendly" Eliminates confusion caused by several switch combinations; making setup and operation easy. Square Wave TIG ™ allows AC/DC TIG for steel and aluminum. Large. Dual meters enable the operator to preset weld voltage in CV mode and amperage in CC mode before striking an arc. optional) Arc control adjusts inductance to optimize MIG arc performance. Or Dig control for Stick. Stackable design can save valuable classroom or workshop space. Line voltage compensation keeps output power constant even if input power varies plus or minus 10% Built-in 10-pin connector for direct hookup of Spoolmatic® 15A or 30A spool guns. Built-in 14-pin connector provides quick. Direct connection for 14-pin 24 VAC Miller wire feeders and accessories. operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Specifications Input Power Requires 1- phase power(primary power cord not included) Rated Output 250 Amps at 30 VDC. 60% duty cycle, 300 Amps at 32 VDC. 40% duty cycle, Voltage Range(CV Mode) 10-35 VDC Amperage Range(CC Mode) 5-400 A, Max. Open-Circuit Voltage 80 V
|
|
Thermal Arc Arcmaster 300 AC/DC Tig welder , 3 phase 415v
View my other items for more Top Quality Welding equipment Specialist Machine Parts Ltd 01299 878965 The approved and accredited Miller warranty and non-warranty repair centre for the UK Experts in the repair and service of all other makes. We also supply Top Quality used welding equipment. All the equipment we supply is fully overhauled and tested in all functions and comes with a 6 month warranty. For auction- a top quality Japanese Built( Sanrex) Thermal Arc Arcmaster 300 AC/DC. The unit is very lightweight but very powerful making it ideal for site work as well as in-house work. The welder is in excellent condition 9/10 and comes with a 6 month warranty. Functions include- Pulsing functions. Sloping functions, mini log controls, meters, AC balance and many more including memory settings to store specific job parameters. The package comes ... morecomplete with a foot control. WP 26 tig torch, earth lead, gas hose and 6 month return to base warranty. Carriage to England and Wales is £30 + VAT = £36.00- elsewhere please contact us for a quote- stating post code. Area code or Zip code. You are more than welcome to come and try the machine here at Stourport. If you have any questions please email or call us on– 01299 878965 S.M.P Ltd is a specialist dealer in Arc Welding Equipment. We have over 35 years experience in the design. Repair and servicing of MMA, Mig, Tig welders, Plasma cutting equipment and Welder Generators. All the equipment we offer is fully overhauled. Tested for electrical safety and offered with a 6 month Return to base guarantee. conditions of RTB guarantee = SMP Ltd will repair the machine free of parts and labour costs for six months from date despatched from our works. The purchaser is responsible for shipping charges to us, SMP Ltd will pay shipping charge return to the customer, guarantee does not cover faults or damage caused by purchaser or no fault found situations. We offer only high quality. Industrial equipment to the highest standard so bid with confidence and
|
|
AIRCO 300 AMPERES AC/DC STICK HELIWELDER IV WELDING MACHINE
UP FOR SALE IS MY AIRCO 300 AMPERES AC/DC STICK HELIWELDER IV WELDING MACHINE. WELD WITH AC, DC OR STICK, SHE IS SITTING ON AN HEAVY DUTY SELF CONTAINED WATER CART, SHE IS EQUIPPED WITH THE PULSE ATTACHMENT FOR WELDING BEER CANS TOGETHER, WELDER HAS EXTENDED TIG LEADS TO REACH WAY OUT THERE, USED VERY LIGHTLY IN AN AUTOMOTIVE REPAIR SHOP(NOT WORKED TO DEATH IN A WELDING SHOP)THE WELDER COULD STAND A GOOD CLEANING. CAN'T PICK IT UP I WILL DELIVER IT WITHIN A 150 MILE FOR $100.00 OR YOU CAN CALL ME AT 916-838-6855
|
|
P&H AC/DC Arc Welder 300 Amp DAR-300 HFGW Spec. 2100H 792 W/ Stand
H&W AC/DC ARC WELDER DAR-300 HFGW SPECIFICATIONS 2100H 792 300AMP THIS ITEM WAS TAKEN FROM A WAREHOUSE AND IS BELIEVED TO BE IN WORKING CONDITION. ITEM IS SOLD"AS-IS" PICTURES ARE OF ITEM YOU ARE PURCHASING. FEEL FREE TO ASK ANY QUESTIONS AND I WILL DO MY BEST TO ANSWER THEM. HAPPY SHOPPING AND PLEASE CHECK OUT OUR OTHER LISTINGS ON OUR STORE. AGAPE EXCHANGE.
|
|
HOBART CYBER TIG 120 WELDER 300 AMP STICK TIG AC/DC HF NO RESERVE
GOOD. CLEAN RUNNING MACHINE. MFG- EARLY 1980's HOBART CYBER TIG-120 300 AMP AC/DC TIG/STICK WELDER. HIGH FREQUENCY, NEWER STAINLESS BERNARD WATER COOLER INCLUDED ON ROLLING CART. 2-STINGERS, CART WILL HOLD 3-BOTTLES, ROD HOLDERS AND TIG RODS INCLUDED. SINGLE PHASE, 100-AMP, 60% DUTY CYCLE. LOCAL PICKUP, OR WILL STRAP TO PALLET FOR SHIPPING, YOU PROVIDE THE CARRIER. EMAIL ANY QUESTIONS. NO RESERVE, SUPER DEAL FOR SOMEONE NEEDING A"REAL" WELDER FOR STEEL, STAINLESS OR ALUMN. WELDING. FOR SALE LOCALLY FOR SO WE RESERVE THE RIGHT TO END LISTING EARLY.
|
|
miller shopmaster 300 cccv ac/dc
This is a great unit used by my father before he passed away in his fab-shop building utility tailer. the miller F-22 wire feeder on top comes with 40 feet of remote hose and power lines. Allowing you to move with the whole cart. if bought new this hole setup could set you back somewhere near $3200.00 This is a heavy unit and can not provide info on shipping cost.
|
|
MILLER SYNCROWAVE 300 AC/DC ARC WELDING POWER SOURCE + WATERMATE 1A & CART
Call Us Today! 626.330.4647| MILLER SYNCROWAVE 300 AC/DC ARC WELDING POWER SOURCE + WATERMATE 1A& CART, Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in working condition. Model# Syncrowave 300 Serial# JJ404678 Features: Master Craftsman's Choice- Syncrowave 300 provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands. Miller Watermate-1A Cooling System. Applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 200/ 230/ 460 Volts Amperes: 138/ 120/ 60 Amps Kilowatts: 12.8 kW Hz: 60 Phase: 1 Output: Voltage: ... more32 Volts Amperes: 300 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps. Overall Dimensions: 58" x 28" x 55" tall. Comes as shown in pictures. Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please read descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume items come with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payment item will be relisted and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. STORAGE We offer storage services from small items to full containers. W
|
|
LINCOLN IDEALARC TIG-300 AC/ DC ARC WELDER WITH BERNARD COOLER
LINCOLN TIG-300 WELDER Up for auction is Lincoln Tig-300 welder. This machine is in good used condition and ready to go to work! It is powered by 1 phase 230/460 volt power. It comes with Bernard cooler and cart. It is a model# TIG300/300 Code 7499. Serial# AC-375777. P lease visit the manufacturers website at for complete specs. This machine is expensive new. Here's your chance to save! The machine can be shipped via Big Red Brokerage or World wide express. Just give me your zip code and I will run a quote for you. All of my shipping quotes are to a business with unloading capabilities. If this is to be shipped to a residence or you need a lift gate truck please indicate. Please contact us for available Payment Methods. Payment is due within 3 days of the end of auction. If shipping out of the country. Buyer is responsible for any fees ... moreor taxes there country may impose. Colorado residents will pay a 7.1% tax. After payment is received I will coordinate shipping within 1-3 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable. Please keep in mind you are buying used equipment. Not new or refurbished unless stated in the description. Used equipment will have dings, dents, scratches in the paint, minor cracks and chips. Equipmentstop reserves the right to end an auction early. Not all items sold by Equipmentstop are weighable by Equipmentstop, therefore some items shipping weights are a best estimate. Feedback will be left after feedback has been received. If you have a question or concern. Please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers and repeat buyers. Thank you for your bid! On Feb-01-12 at 17:37:59 PST. Seller added the following information:
|
|
AC/DC WELDER CONVERTER MODEL 131-20 MAX 300 AMPS INPUT 240 AMPS OUTPUT
Used. Inspected and tested AC/DC Universal DC Welder Converter. Model: 131-20 Maximum AC input 300 amps at 80 volts Maximum DC output 240 amps. Unit dimension: 18"L x 7-1/2"D x 8"H Can by attached to any 300 amps AC welder or smaller. Require 115 volts for cooling fan. Shipping weight: 40 lbs.
|
|
Miller syncrowave 300 tig welder AC/DC high freq, torch, cooler, thumb switch
Hi. Thanks for looking. IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO GIVE US A CALL AT 717-926-3975 AT ANY TIME. ANOTHER QUALITY ITEM FOR SALE FROM CENTRAL PENN MACHINERY OPEN MONDAY THROUGH FRIDAY 8AM TO 5PM AND ALL WEEKEND LONG BY APPOINTMENT Selling a nice Miller Syncrowave 300 tig welder. Machine has a full range from 5 to 375 amp welding output. Machine is absolutely loaded with features including AC/DC. Straight and reverse polarity, high frequency, pre and post flow timer capabilities, syncrowave technology, factory miller cart, factory miller cooler, water cooled tig torch, remote thumb style amp control, ground clamp, argon regulator, power cord, etc. It is a full package, all you have to do is add gas and you are ready to weld. The whole thing runs off of 220 volt single phase house current. PLEASE FEEL FREE TO SET UP AN APPOINTMENT ... moreTO COME BY AND SEE THE MACHINERY UNDER POWER. THE SHIPPING PRICE SHOWN ABOVE IS TO A COMMERCIAL LOCATION. RESIDENTIAL WILL BE AN ADDITIONAL HUNDRED DOLLAR CHARGE g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14ba66fa160-0x10f-
|
|
Airco 300 Amp AC DC Heliwelder Tig Welder with Coolant Pump, Tig Gun,Miller foot
Airco 300 Amp AC DC Heliwelder Tig Welder with Coolant Pump. Tig Gun, Miller foot pedal Up for sale we have an Airco 300 Amp AC DC Heliwelder Tig Welder in good working condition. All controls function properly. This unit comes with a tig gun with 23 feet of hose/cable(connected) Ground clamp with 23 feet of cable, and a foot pedal controller. It also comes with a coolant pump and a gas line. There is also an extra gas line pigtail. But there is no tanks or regulators included. The welder is set up to run on 230V. Single phase. Airco AC/DC Heliwelder. Stock 1341-0165, serial no. HG008356. Great offer on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The shipping ... moreweight 865 lbs and the dimensions are 48" L x 40" W x 55" H. Unit will be strapped to a pallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.5% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now
|
|
|