|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: New – Open box Location: Gilroy, United States NEVER USED Miller TIG welder: Dynasty 200 DX with Coolmate, Cart, full argon bottle, torch, heavy-duty pedal control by SSC Controls (Ohio), HTP Pyrex ... morecups and welding accessories, original container of coolant (never installed). This has been sitting in my garage since new. Miller is the finest welder you can buy--and it's made in USA. This is far below retail. PICKUP ONLY!
Buy It Now
Free Shipping Condition: Used Location: Houston, United States Welder was tested to insure it is working properly. Sale is for the welder and power cable only, nothing more. Miller dynasty 200DX in working conditon. ... moreProduct integrity is our most important value with each of our products.
Buy It Now
$85.00 Shipping Condition: Used Location: United States This Miller Electric Maxstar 200 DX TIG welder is up for sale. It's a heavy-duty welding machine that supports both AC and DC polarity. The welding process ... moreused is TIG and it's suitable for industrial purposes.
Buy It Now
$400.00 Shipping Condition: Used Location: Mims, United States Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords ... morefor 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States A CK Worldwide tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig welders. This torch is MADE IN USA.This ... moreis a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States You are bidding on a replacement HTP USAWELD brand tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig ... morewelders. This torch is MADE IN USA. This is a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection. Some other models it will fit: Everlast 200DX. 250EX, 315LX, 255EXT, 280STH A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 9mm quick connect male fitting. If you need the torch in any other configuration(25 foot hose. Flex head, different size dinse or gas connection) send us an email for a quote. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. 1725FX-35D QD
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States A CK Worldwide tig torch that has been designed to be a plug and play torch to fit the Everlast 200DX and 200DV Tig welders. This torch is MADE IN USA.This ... moreis a 17 FLEX series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
Buy It Now
$395.00 Shipping Condition: Used Location: Cape Coral, United States This Miller Tig & Arc Welder Dynasty 200DX comes with a Coolmate Cart, Argon Bottle, and Regulator. It's perfect for heavy duty industrial use and ready ... moreto tackle any welding job that comes its way. The welder has been throughly tested and has been deemed to be in great working order. The Make of this welder is Miller, a company known for producing high quality welding equipment. This welder is ideal for those who require a reliable tool for professional welding. With its advanced technology and excellent performance, this welder is a great investment for anyone who is serious about welding.
$137.27 Shipping Condition: Used Location: Holbrook, United States Miller Dynasty 200 Dx Tig Welder, 200 Water Cooler Wireless Foot pedal Brand New. Condition is Used. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
Buy It Now
Free Shipping Condition: New Location: Daly City, United States This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This foot pedal ... moreis used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Miller Electric Part # 244025.
Buy It Now
$15.00 Shipping Condition: Used Location: Willoughby, United States Good used Miller welder circuit board 219817 for maxstar 200 DX. Ships to lower 48 only.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Royal Oak, United States COMPLETE KIT including water cooler, tig torch, ground clamp, 50ft power cable. and regulator. Totally turnkey. Points cleaned and adjusted. New NOVA ... moretig pedal.
Buy It Now
$28.16 Shipping Condition: Brand New Location: Warwick Farm, Australia Newest 17 Swivel head torch set.
Buy It Now
$10.80 Shipping Condition: New – Open box Location: Hutchinson, United States Miller IGBT(213179 kit p/n) (209272 p/n of the igbt) For Dynasty 200 SD/DX Arc New old stock.See pictures.Check out my store for more great deals.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States The torch includes a long back cap as pictured.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 17 seriesFLEX HEAD tig torch and will plug right in to the Miller Dynasty 200DX Tig welders and any other welder which has a 1/2" twist lock ... moreconnector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This torch is MADE IN USA! This is a 17 series tig torch and will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has ... morea 9mm quick connect gas connection. Based on inventory levels the hose could be black, blue, or red.
Buy It Now
Free Shipping Condition: New Location: Chattanooga, United States 2.4mm x 175mm. Miller Econotig, Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 225, 255 and 275 welders. Precision Tig ... more175, 185, 225, 255 and 275 welders HTP Invertig 201, 160DC, 130 DCHF, 130 DCL, Miller Dynasty 200SD and 200DX, and the Lincoln V205-T.
Buy It Now
$398.39 Shipping Condition: Used Location: La Marque, United States Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords ... morefor 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
Buy It Now
$250.00 Shipping Condition: Used Location: Atlanta, United States Processes: GMAW (MIG), FCAW (Flux-Core), SMAW (STICK), DC GTAW (DC TIG). Wire Feeder with Gun. Ground & Stinger Whip.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States Power plug not included. About KOOBEN Smart Weld.
Buy It Now
$40.00 Shipping Condition: New Location: Daly City, United States ACDC TIG Welders. ACDC Combo. 12 ft. Everlast 26 Series TIG torch with 35 series DINSE stle connectors and torch switch for 2T/4T operation. DC TIG Welders. ... moreEverlast regulator made from billet brass. Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States Excellent Quality Foot pedal Includes 25 ft (8 m) cord and 14 pin plug, Miller styleMiller RFCS-14This is a replacement for the Miller RFCS-14 (Miller ... moreP/N 043 554) and the Miller RFCS-14HD (Miller P/N 194 744). This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This Coplay Norstar foot pedal is used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector!Also used for the T200 Norstar welder!.
Buy It Now
Free Shipping Condition: New Location: Mentor, United States We have proven exceptional quality for the last 20+ years. Our model C810-1425 is 16-ga drawn steel with black powder coat paint unlike the plastic Miller. ... moreWe use a precise gearbox with a machined brass pinion, not a belt drive.We use only the highest grade electrical components and life test our designs to one million life cycles.
Buy It Now
Free Shipping Location: Mount Laurel, United States Brooks Circuit Specialists. We will receive the unit and repair. Our services are much more extensive than other options. All units are fully covered ... moreunder our warranty for any defect in our process or premature failure of any kind.
Buy It Now
$12.00 Shipping Condition: New Location: Iva, United States 20 ft Cord With 14-Pin Plug.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V 5200DX 3IN1. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. • Argon Regulator and Tank for TIG ... morewelding. 50 Amp Plasma Cutter / 200 Amp TIG/ARC/MMA Welder.
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Rear plug uses DINSE type cable adapter LDT-917-F with solid 0.5-in male pin and gas hose; compatible with Other TIG welders with Dinse 50-mm receptacle. ... moreWeldingCity® TIG Welding Torch 9 & 17 Cable 57Y03R 25-ft & Dinse Gas-thru Rear.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States With solid 0.5-in DINSE type male pin. WeldingCity® 5-pk Cable Adapter Dinse 35mm (195378) TIG Welding Torch 9/17 | USA. WeldingCity® 5-pk Gas Pass-Thru ... moreCable Adapter Dinse-35 TIG Welding Torch 9/17 US.
Buy It Now
$9.36 Shipping Condition: New Location: Elk Grove Village, United States A Tig Torch Adapter that will allow you to connect any 9 or 17 series Tig torch with a one piece cable assembly to a welder that has a 1/2" dinse connector ... moreand a 3/8-24 RH male gas connection. This tig torch adapter will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 17 series tig torch and will plug right in to the Miller Dynasty 200 series welders, Dynasty 300 series welders, Syncrowave 250 DX, Syncrowave ... more350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States A Tig Torch Adapter that will allow you to connect any 26 series Tig torch with a one piece cable assembly to a welder that has a 1/2" dinse connector ... moreand a 7/8-14 RH male gas connection. This tig torch adapter will plug right into the Everlast Tig Welder which has a 1/2" twist lock connector and has a 9mm quick connect gas connection.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Miller Electric Part # 250006.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States TIG Welding Torch WP-26 Set Power Cable 46V30R 25-ft w/ Adapter 45V62 for Miller. Premium quality 200A air-cooled WP-26 TIG welding torch set power cable ... more46V30R (25-ft) with rear plug cable adapter 45V62 for Miller welders.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States TIG Welding Torch 9 & 17 Power Cable 57Y03R 25' w/ Connector 105Z57 for Miller. Premium quality 125A/150A air-cooled WP-9/WP-17 TIG welding torch set ... morepower cable 57Y03R (25-ft) with rear plug cable adapter 105Z57 for Miller welders.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States Miller Dynasty 200DX. The CK Micro TIG Torch will handle your hard to reach welding jobs. With a low profile and clear pyrex nozzles, the Micro TIG Torch ... moreis the perfect tool for the operator to see their work, ensuring a high quality weld in normally hard to reach places.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This torch is MADE IN USA! This is a 26 series flex neck trim line tig torch will plug right into the Everlast Tig Welder which has a 1/2" twist lock ... moreconnector and has a 9mm quick connect gas connection.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
Buy It Now
Free Shipping Condition: New Location: Duluth, United States With solid 0.5-in DINSE type male pin. WeldingCity® Gas-Thru Cable Adapter Dinse-25 (Small) TIG Welding Torch 9/17 | US. TIG Torch Parts. TIG Torch Accessory ... moreKits. TIG Complete Torches. Welding Safety.
Buy It Now
$5.00 Shipping Condition: New Location: Elk Grove Village, United States
Buy It Now
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V SIMCT-5200DX. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. 50 Amp Plasma Cutter / 200 Amp ... moreTIG/ARC/MMA Welder. • TIG Torch with initial consumables.
Buy It Now
$15.46 Shipping Condition: New – Open box Location: Columbus, United States TokinArc DX-0201187 Insulator. You are buying one new TokinArc DX-0201187 Insulatoras shown in the pictures. New surplus from a large manufacturers spare ... moreparts inventory. Location 4-1.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 9 series air cooled tig torch and will plug right in to the Miller Dynasty 200 and 210 series welders, Dynasty 300 series welders, Syncrowave ... more250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder.Based on inventory levels the hose could be black, blue, or red.
Buy It Now
Free Shipping Condition: New Location: Corydon, United States Miller 250006 DPST Toggle Switch has voltage rating of 600 VAC, current rating of 40 A and is designed to use with Shopmate 300 DX, Syncrowave 200. Package ... moreof 1
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States Suitable for SIMADRE® DC 5200D/DX, 520D/DP, 5020D, DC TIG200DP, TIG200P WELDING MACHINES. Not for ACDC TIG machines.
Buy It Now
$4.00 Shipping Condition: New Location: Elk Grove Village, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 10 brand new pieces of 2% Ceriated Tungsten. This tungsten is 3/32” diameter and 7” long. It has a grey tip and meets ANSI/AWS spec A5.12 EWCe-2. It is color coded orange 2% Certification is available on request. This is first quality tungsten and is an excellent substitute for 2% thoriated tungsten. 2% Ceriated Tungsten is generally used with transformer based square wave or sine wave TIG welding machines in the DC mode for welding steel. Stainless steel and 4130 tubing. HTP’s part number is TC2-7332. This tungsten is suitable for use in all tig welders. A few examples are the Miller Econotig. Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 255 and 275 welders. This tungsten is also excellent for use in Inverter machines for welding both AC and DC. Some examples are the HTP Invertig 201. 160DC, 130 DCHF, 130 DCL, Miller Dynasty 200SD and 200DX, and the Lincoln V205-T. These are just a few examples. But this tungsten will work in all tig welders. Save time. Money and gas- this tungsten ships anywhere in the US for only $5.95 by Priority Mail. Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the wire. S
Buy It Now
$4.00 Shipping Condition: New Location: Elk Grove Village, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on 10 brand new pieces of 2% Ceriated Tungsten. This tungsten is 1/16” diameter and 7” long. It has a grey tip and meets ANSI/AWS spec A5.12 EWCe-2. It is identical to orange 2% Ceritated Tungsten except for the color of the tip. Certification is available on request. This is first quality tungsten and is an excellent substitute for 2% thoriated tungsten. 2% Ceriated Tungsten is generally used with transformer based square wave or sine wave TIG welding machines in the DC mode for welding steel. Stainless steel and 4130 tubing. HTP’s part number is TC2-7332. This tungsten is suitable for use in all tig welders. A few examples are the Miller Econotig. Syncrowave 180, 200 and 250, Hobart Tigmate and Lincoln Precision Tig 175, 185, 255 and 275 welders. This tungsten is also excellent for use in Inverter machines for welding both AC and DC. Some examples are the HTP Invertig 201. 160DC, 130 DCHF, 130 DCL, Miller Dynasty 200SD and 200DX, and the Lincoln V205-T. These are just a few examples. But this tungsten will work in all tig welders. This tungsten ships anywhere in the US for only $5.95 by Priority Mail. Save time. Money and gas! Save even more– Mig. Tig and Plasma parts ship FREE with Tig Filler Rod or MIG welding wire. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Withsolid 0.5-in DINSE type male pin. TIG Torch Parts. TIG Torch Accessory Kits. TIG Complete Torches. Welding Safety. Welding Cables & Connectors. For ... moreLincoln welders, this torch hose/cable plug may work with: Lincoln Invertec® V250-S/V275-S/V300-Pro/V350-Pro series, Lincoln PowerWave ® 355 and Lincoln ALT 304, as well as all other welders using LDT-26-R rear (Exception may occur. ).
Buy It Now
Free Shipping Condition: New Location: United States MILLER ELECTRIC. Electrical Boxes. Electrical Outlets. Light Industrial. & Recepticles. and Enclosures. General Purpose. & Industrial.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States This is a 17 seriesFLEX HEAD tig torch and will plug right in to the Miller Dynasty 200DX and 210DX Tig welders and any other welder which has a 1/2" ... moretwist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder.
Free Shipping Condition: New Location: Goleta, United States Simadre 110V/220V 5200DX 3IN1. • Simadre brings you the latest in plasma cutter technology with the new SIMCT-5200DX. • Argon Regulator and Tank for TIG ... morewelding. 50 Amp Plasma Cutter / 200 Amp TIG/ARC/MMA Welder.
Buy It Now
Condition: Used Location: Pico Rivera, United States Model #: Syncrowave 250 DX. This is a CC-AC/DC Square Wave Power Source w/ Tig Runner Cooling System in working condition. Equipped With - Miller Tig ... moreRunner Cooling System. Lift-Arc - Simply touch the tungsten to the work piece.lift.and the arc is initiated instantly and automatically without the use of high frequency.
Buy It Now
$124.65 Shipping Condition: New – Open box Location: Salisbury, United States Norstar Mig spool gun. There are 2 different types of guns one is for the Lincoln style and the other fits the miller style. Please just let me know which ... moremachine you have and I will send you the right one. This is a light spool gun. Its rated at 135 amps@ 30% duty cycle. IF YOUR MACHINE IS SPOOL GUN READY then this is a plug and play. We do sell wire harness adaptor kits if you machine is not spool gun ready. Those are $15.99 extra. Please feel free to ask me any questions! Thanks for looking! Here are the select welders that the spool gun works on besides norstars m200! Lincoln Miller POWER MIG® 216 Millermatic 140/180/211 POWER MIG® 140C POWER MIG® 180C POWER MIG® 180 Dual SP-140T SP-180T
Buy It Now
Free Shipping Condition: New Location: China Ligature&Mouthpieces. Luthier Tools. - Power: 200W. This Sparkle Welder can be used to weld - Welder Size: 300 X 180 X 140mm. - 1 X Spot Welder Machine. ... moreThis product is 110V type on sale, don’t accept change order information.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Rear plug uses DINSE type cable adapter LDT-917-F with solid 0.5-in male pin and gas hose; compatible with Other TIG welders with Dinse 50-mm receptacle. ... moreWeldingCity® Gas-thru Dinse-rear TIG Welding Torch WP-9FV Flex-Valve 125A 25-ft.
|
|
|
|
Miller Dynasty 200 DX TIG Welder with Stand Pedal Torch Leads and Tank
This is my pride and joy here. Very well kept. I'm sure you all are aware and how cool all the features are on the Dynasty 200DX. That's why you're looking at this. I'm just going to give you a list of what is included, and a description of the condition. The condition on the unit is a 9.9 out of 10. The condition on the torch and pedal are a 7 or 8 out of 10. The pedal cord has a splice in it that does not affect the functionality at all. I forgot to get pictures of the contractor kit and case. That will be included. Everything that is in the contractors kit that you don't see in the pictures is still in the case and is in brand new condition. And will be included as well. Beside that. The tank and custom made stainless steel cart and welding wire that you see in the pictures will all be included. I also have a bunch ... moreof cases of tungsten which will be included. Local Pickup or Buyer to arrange shipping. California Buyers will be charged 8% sales tax.
|
|
|
Miller Maxstar 200 DX P/N 903701-01-1 TIG & Stick Welder Unit
Miller Maxstar 200 DX. P/N 903701-01-1, TIG& Stick Welding Unit Condition: Good. Missing front door, Clean but has scratches Does not include any accessories. Just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Miller Maxstar 200 DX With Weld-craft Torch and Foot Pedal 903701011 200DX
Miller Maxstar 200DX WeldCraft Tig Torch. With Hand Control Foot Pedal. Regulator Looking for a Dynasty 200DX Call me at 702 249 7572 We can calculate shipping or use your shipping Co. Please contact us for shipping Reserve is set at 1700.00 if the auction does not meet the Reserve the price might be up for discussion Maxstar DX- When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amps, initial amps, initial slope time, final slope time, and final amperage control. The Maxstar® 200 DX TIG welder features Auto-Line technology. The most advanced inverter power management circuitry in the welding industry, allowing the end user to automatically connect to any input power, 120-460 volt, single- or three-phase. Built-in gas solenoid and HF means there are no additional accessories ... morerequired. With 1-200 amps of welding output the Maxstar 200 Series provides the operator with superior low-end DC TIG or high-end DC Stick performance. Weighing in at 37 lb(16.8 kg) The Maxstar 200 is built to function dependably under the most demanding conditions. Processes DC TIG(GTAW) Pulsed DC TIG(GTAW-P) Stick(SMAW) Applications Manufacturing Industrial Aerospace Petro/Chem Fabrication Mechanical Contractors Food/Beverage Industry Dairy Industry Shipboard Installation/Repair Features: DX Model: When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amps, initial amps, initial slope time, final slope time, and final amperage control. Blue Lightning™- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenace on solid state components. Preset parameters for tungsten sizes from.020- 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications. Custom settings are programmable. Lift-Arc™ start provides TIG arc starting without use of high frequency. Portable in t
|
|
|
Miller Maxstar 200 DX 125 Volt TIG Stick Welder 903701-01-1 Fabrication MIG
Up for your consideration is a Miller Maxstar 200 DX 125 volt TIG/Stick welder. Catalog#903701-01-1, Serial#LE 370539. It functions as it should.and has scratches. It can work on 110, 220, 208, 480, and 460 volt(single or three phase) Included are: tig torch, stinger, ground, gauges, and hoses. There is no foot pedal, and the connector on the tig torch will need to be changed if you just want to plug it in like the stinger and ground leads. The tig torch is included, but not pictured. The foot pedals are easy to find. They also make a remote that you can connect to your tig torch and you run it with your thumb. I have one on mine and I love it. These are excellent machines and you can google it to find out what exactly they can do. Also the little plastic panel door has a broken hinge pin(not an issue when closed) and there are various scratches. ... morePlease ask any questions you might have. Make sure to look at the other welders that I currently have listed. I mainly use Fed Ex even though the calculator shows it as UPS. The price will remain the same. I get far better service from them than UPS.
|
|
|
MILLER WELDER MAXSTAR 200 DX PORTABLE TIG / SMAW / CAC-A / GTAW-P WELDER stick
Good welding machine for stick and tig lightly used with low hours. SMAW AND GTAW Can put any output you want.
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG Foot Control Contractor Package (air cooled)
I am selling my Miller Dynasty 200 DX AC/DC TIG welder with the Foot Control Contractor Kit Pkg(air cooled) I purchased this welder roughly 6 years ago new at Atlas welding supply in Berkeley CA. The Serial No. LH011462L indicates it was made before 2008 and they have made a couple of changes to the model. I have only used it a couple of times at home totaling 1 hour and 26 minutes with 234 arc strikes. These are recorded in the machines hour meter. It worked perfectly when last used. The machine looks as new and most components are in nearly new condition. Includes all that is in the photos- I believe everything in the miller kit is there but will not promise anything other than what is in the photos. I may amend this but I do not currently have the manuals to send with it. I moved and they are filed somewhere. The manuals are readily available ... moreto download from Miller This is a very nice welder. This Please contact me with any questions before buying.
|
|
|
MILLER TIG Welder Syncrowave 250 DX 250DX (200/230/460) Complete Package 951117
You are bidding on ONE(1) MILLER Electric Mfg. TIG Runner Welder Syncrowave 250 DX 250DX(200/230/460v) Complete Package 951117 These units are in good cosmetic and working condition. You get the item as shown in pictures. Please reference pictures for detailed view. Free Freight Shipping on item! Thanks for looking. Product Overview: Specification: Input Power: 208/230/460 Volts; Single Phase; 50/60 Hz Rated Output: 200 Amps; 28 VDC; 60% Duty Cycle: 250 Amps; 30 VDC; 40% Duty Cycle Output Range: 3- 310 Amps Dimensions(H X W X D) 46" X 28 1/2" X 40 1/2" Net Weight: 478 lbs. FYI- Our products are acquired from bankrupt. Downsized or defunct companies. Most items are pulled from their working environment and operation. Items are usually sold in the same condition that we receive them. If there are any known issues regarding the ... moreitem, we will certainly let you know. We do our best to take pictures of the actual item and anything included with the auction. If you don't see it in the picture or it is not listed in the description, it s probably not included. Never assume that it is included. If you have any questions, please feel free to email us at PLEASE CHECK OUR FEEDBACK RATING AND BID WITH CONFIDENCE. Thanks for Bidding and Good Luck! AUCTION TERMS: DUE TO EBAY’S NEW POLICIES. ALL INTERNATIONAL BUYERS OUTSIDE OF THE U.S.A. MUST GET PRE-APPROVAL TO BID. BIDS WITHOUT PRE-APPROVAL WILL BE CANCELLED. PAYMENT OPTIONS: We accept PAYPAL for all shipped purchases and Cash or Cashiers Checks for local pick ups from our San Francisco office. Payments must be received within 5 days. California residents pay 8.5% Sales Tax for San Francisco County. SHIPPING: Shipping and handling charges listed. Including auctions listed with free shipping are shipped via ground service within the contiguous 48 states in the US. Shipments to Alaska. Hawaii. And US Territories are higher so email us prior to bidding to get correct shipping costs. Oversized, heavy and delicate items are shipped on a pallet via a freight compa
|
|
|
Miller Syncrowave 250 DX Complete Pkg, AC/DC TIG and Stick, 200/230/460V 951117
Miller Syncrowave 250DX Complete Package. 200/230/460V Part# 951117 This listing is for a factory reconditioned unit with a full factory warranty Machine Overview: A light industrial machine great for precision metal fabrication. Maintenance and repair, and automotive fabrication. Processes include Stick. TIG, Pulsed TIG, and Air Carbon Arc(3/16 capable) Squarewave technology, Synco Start that allows Soft. Standard, or HOT TIG starts based on your application, and Digital Welding Meters for accuracy and repeatability. 3-310A range. 200A at 28 VAC, 60% Duty Cycle, 250A at 30 VAC 40% Duty Cycle. Complete Package includes Syncrowave 250 DX power source. Coolmate 3.5, and No. 37 running gear We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available at time of delivery. We are a welding ... moresupply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over 40 years. If you have any questions on this or any other welder. Just give us a call. Jodi 602 252-0341 or 602-396-1178 John 602 206-0571
|
|
|
MILLER MAXSTAR 200 DX DC TIG STICK WELDER MODEL 903701011 *FREE SHIPPING*
Up for auction is a MILLER MAXSTAR 200 DX DC TIG STICK WELDER MODEL 903701011 with free shipping in the lower 48 states! This is NOT a repair or refurb! It is in great working order. Ready for instant use. Comes as shown. If you have any questions about this auction please ask and good luck bidding.
|
|
|
Miller Dynasty 200 DX TIG/STICK Welder, 120-460V Machine (907099011)
Miller Dynasty 200 DX 120-460 VAC TIG/STICK Welder Part# 907099011 Serial#MA460772L This listing is for a USED machine with no factory warranty. Machine has been tested by our Certified Miller service technician and operates to factory specification. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard Features include: Auto-Line Technology(any input voltage 115-460V with no manual linking) Extended AC Balance(30-99% AC Frequency Control(TIG and STICK AC Waveforms Variations(Advace Squarewave. Soft Squarewave, Sine, Triangular) Lift Arc Capabilities Smooth DC Welds Hot Start Stick capability Fan On Demand Excellent Portability Welding Amperage Range: TIG 115V = 5-150A AC. 1-150A DC/TIG 200-460V = 5-200A AC, 1-200A DC Includes: Power source. Primary power cable(no plug) and 2-50mm dinse ... moreconnectors. Shipping includes UPS Ground shipment to the Continental Unites States. Alaska and Hawaii available at an additional charge. No international shipping available at this time. Expedited shipping is available. Please call for details! We are a Welding Supply company that has been selling new/ used welders and welding supplies for over 40 years. If you have any questions. Just give us a call. Jodi 602 252-0341 or 602-908-7132 John 602 206-0571
|
|
|
Miller dynasty 200 DX heli arc
Miller dynasty 200 heli arc welder A/C D/C used but in good condition. Comes with miller cool mate water cooler. Weldtec wp20 torch, ground cable, regulator everything you need. Power was 208 three phase, but I believe it works on all single phase or three phase?
|
|
|
miller dynsty 200 dx
Aprox. 200 hrs on.
|
|
|
Miller Maxstar 200 LX Tig Stick (DX)
Miller Maxstar 200 LX. Item is used in great shape. Shows 77 hours on the Arc timer. A few scratches but well taken care of. Has all the features of the DX plus the Automation Interface. Maxstar 200 LX LX Model: With the Automation Interface Connector. The integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs, valid arc, pulse lock out, and end of weld sequence outputs. Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC. Single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit ... morevoltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters than traditional knobs and switches. HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination. Lift-Arc™ start provides TIG arc starting without use of high frequency. Programmable HF start parameters allows the operator to independently set HF starting conditions based upon electrode diameter and material thickness for each application. Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt. Dust, and debris, greatly improving reliability. LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amp
|
|
|
Miller Maxstar 200 DX AC/DC TIG Welder W/Cables and gun
Miller Maxstar 200 DX AC/DC TIG Welder W/Cables and gun YOU ARE BIDDING ON A Miller 200 DX IN EXCELLENT CONDITIONS"it comes as shown in the pictures" There is a 100% Money back guarantee if item is not as listed! FREE Shipping and handle just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE IN PICTURES ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL MY POLICES: P LEAS E SERIOUS& HONEST BUYERS ONLY! ALL ITEM MUST BE RETURN S WITHIN 4-5 days after received. If there any dissatisfaction with it. P lease contact us before any negative feedback, so that we can resolve the issue. MY GOAL IS TO HAVE A SATISFY CUSTOMER AT ALL TIMES. THANK YOU AND HAPPY BIDDING. The Maxstar‚® 200 Series features Auto-Line™ ... moretechnology. The most advanced inverter power management circuitry in the welding industry, allowing the end user to automatically connect to any input power, 120-460 volt, single- or three-phase. Built-in gas solenoid and HF means there are no additional accessories required. With 1-200 amps of welding output the Maxstar 200 Series provides the operator with superior low-end DC TIG or high-end DC Stick performance. Weighing in at 37 lb(16.8 kg) The Maxstar 200 is built to function dependably under the most demanding conditions. Features: SD- Basic features for TIG/Stick. DX- Provides full-function pulsing and sequence control. LX- Automation made simple. With the Automation Interface Control. The integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs; valid arc, pulse lock out, and end of weld sequence outputs. HF start provides non-contact arc starting. Adaptive Hot Start™ for Stick- Automatically increases output amerage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Lift-Arc™- Simply touch the tungsten to the work piece.lift.and the arc is initiated
|
|
|
Miller Dynasty 200 DX AC/DC TIG Welder Package w/Wireless Foot Control 951397
Miller Dynasty 200 DX Complete Package with Wireless Foot Control Miller Stock#951397. Serial no. ME180125L This listing is for a unit that was previously demonstrated by a Miller representative. It holds a full manufacturer warranty and is complete. Other than torch coolant. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard. Processes include: AC/DC Tig. Pulsed TIG, Stick, and Air Carbon Arc(5/32 inch maximum) Specifications: AC TIG Features Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. These models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. AC Waveforms: Advanced squarewave. Fast freezing puddle, deep penetration and fast travel speeds. ... moreSoft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. AC/DC Stick Features DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer. More penetrating electrodes like E6010. Hot Start™ adaptive control provides positive arc starts without sticking. Frequency control adds additional stability when Stick welding in AC for smoother welds. Other Features: Auto-line ™ allows for any input voltage hookup(115–460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Fan-On-Demand™ power source cooling system operates only when needed. Reducing noise, energy use and the amount of contaminants pulled through the machine. Lift-Arc™ start provides AC or DC arc initiation without the use of high f
|
|
|
Miller Maxstar 200 DX w/Fingertip Complete Package 951138
When the job demands greater control. Pick the Miller MaxStar 200 DX TIG Welder with Fingertip Control and Water-Cooled Contractor Kit. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control. Wireless Remote Control Compatible Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Stick Features(DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. ... moreHot Start Adaptive control provides positive arc starts without sticking. Low OCV Stick Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Blue Lightning High Frequency Arc Starter For more consistent non-contact starts and greater reliability compared to traditional HF arc starters. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. DC TIG Features DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Comes complete with: Maxstar 200 DX power source 8 ft(2.4 m) primary cord 2-Wheel trolley cart(300480) Coolmate 1 cooler 120 VAC(300360) 1 Gallon coolant(043810) RCCS-14 Finger tip control(043688) 25 ft(7.6 m) Weldcraft WP20 water cooled torch(300185) 15 ft(4.6 m) Work lead with clamp and Dinse connector Gas hose Smith Regulator/flowmeter Torch cable cover Setup DVD Adjustable shoulder strap
|
|
|
MILLER MAXSTAR 200 DX TIG STICK WELDER FOOT PEDAL TORCH AND MORE EXTRAS BUNDLE.
UP FOR BID IS A MILLER MAXSTAR 200 TIG WELDER. THIS CAN BE USED AS TIG OR STICK. THIS WELDER HAS SOME SCRATCHES BUT OVER ALL IN GOOD SHAPE. I HAVE A RESALE SHOP AND I BOUGHT THIS FROM A GUY WHO HAD A SHOP BUT HE IS HAVING BACK SURGERY AND HE NEEDED THE MONEY. HE DID SHOW ME THIS UNIT WORKING AND IT WORKS GREAT. THIS ALSO COMES WITH A FOOT PEDAL AND A TORCH AND A COUPLE GROUND CABLES AND SOME DIFFERENT TIPS AND EVERYTHING U SEE IN THE PICS. IM STARTING THIS AUCTION LOW BUT I KNOW IT WILL BRING GOOD MONEY SO PLEASE DONT ASK ME TO TAKE A BUY IT NOW.THANKS AND GOOD LUCK.
|
|
|
Dynasty 200 DX AC/DC TIG CONT Air-Cooled Package Foot Pedal 951174
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Comes with everything that is in the listing. Cart is also included. Untitled Document Dynasty® 200 DX Air-Cooled Package(Foot Pedal) 951174 Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line™ technology. Offering the most flexible AC/DC TIG/Stick power supply in the welding industry. The Dynasty® 200 DX combines size, weight and Autoline automatic input voltage sensing with world class arc performance. The Miller Dynasty® 200 DX TIG welder provides pulsed TIG welding along with the basic features that are required for most AC/DC TIG or STICK welding applications. Processes AC/DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications: Industrial to Heavy Industrial Apps, Petro/Chem Fabrication, Aerospace, Food/Beverage Industry, ... moreMechanical Contractors, Shipboard Installation/Repair, Dairy Industry Features DX- When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. AC TIG Features Blue Lightning™- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from.020- 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications. Custom settings are programmable. Extended AC Balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz)controls the width of the arc cone and the force of the arc. Advanced AC Waveforms DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018
|
|
|
Miller Dynasty 200 DX Tig Welder 907099-01 / Foot Pedal / Regulator & Flow Meter
Like New Miller Dynasty 200 DX Tig/Stick Welder Serial Number: LF229994 Stock/Model Number 907099-01 Not Included In Sale: No tig torch OR attachement/Plug included(Better finding one to your applcation) No power plug included 115v/230v/400v/460v applicable(Better finding one for your application) No cooler included[some sell with cooler for a"Complete set" Check my listing. Have coolmate 3 115v for sale aswell can sell both together. Send TEXT offers to(716)997-5968 Included In Sale: Unit Itself Miller Dynasty 200 DX Prestine Cosmetic/Mechanical Condition[Model: 907099-01] Ground cable with connector to unit and clasp for your metal- Miller Foot Pedal[Model: RFXS-14HD] Oxweld Type R 6007 661 Regulator and[flowmeter Linde L32] Airco Gauge# 8410091- Unit free shipping NO Warranty. Bid with confidence. you're not getting anymore ... moreor any less all sales are final. PLEASE VEIW PICTURES CAREFULLY AND ASK A QUESTION IF YOU HAVE ONE. Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. Extended AC balance(30-99% controls the amount of oxide cleaning(amperage
|
|
|
Dynasty 200 DX /Water Cooling and Wired Foot Control
The Miller Dynasty 200 DX TIG Welder and Water-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- High Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management ... moreTechnology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start adaptive control provides positive arc starts without sticking. AC frequency
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG w/ Foot Control contractors Kit excellent shap
This miller dx 200 dynasty was used for 1 project which was a aluminum sports wheelchair and have not used it since. This unit works flawlessly and is the top of the line unit. Everything you see in photos is what comes with the unit. The Miller Dynasty 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- ... moreHigh Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG)
|
|
|
Miller 200Dx Maxstar 200 Dx Package
Lightly used Miller Maxstar 200 DX with finger tip torch remote. Weldcraft WP17 GTAW torch, 200A SMAW electrode holder and ground clamp. Currently set up for 220V input power with single phase 3 prong twist lock connector. Has ability to operate on 110v, 220v and 480v power, single phase or 3 phase. Comes as pictured with items listed. Shipped in two separate packages using UPS Ground Service. Auction includes the following: Maxstar® 200 DX power source Adjustable shoulder strap 10 ft(3 m) AC input primary cord(2) international(Dinse 50 mm) connectors RCCS-14 remote finger tip control Protective carrying case Weldcraft® 25 ft(7.6 m) WP17 TIG torch with adapter Smith® flow gauge regulator 200 amp. 15 ft(4.6 m) stick electrode holder Work clamp with 15 ft(4.6 m) 4 cable 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b4f7441de-0x103-
|
|
|
Miller Syncrowave 250 DX Tigrunner W/Pulser COMPLETE PACKAGE TIG 200/230/460V
The Syncrowave® 250DX welder is an exceptional single-phase. TIG/Stick power source designed for the master welding craftsman. When the work demands the arc control of Squarewave technology, premium performance and the highest levels of efficiency and functionality, the Syncrowave® 250DX meets the challenge. At 250 A, 34 V, 40% duty cycle, you can control your level of productivity. This machine is used and offered for sale by the original owner because we have upgraded it to a Dynasty 350. This unit works great and recently had the coolant pump replaced. This auction includes: Syncrowave 250 DX Tigrunner 903765-01-1 on factory running gear with integral cooler and optional Pulser upgrade. Input power cable(appx 25 ft) Outer casing damaged and wrapped with tape about 4 ft. out from machine but wires are intact. Foot Pedal WP-17 ... moreWater-cooled torch with cable cover. 25 ft, less than 100 hours on torch. 15 ft. Ground Cable With Heavy Duty Ground Clamp Regulator and gas hose Owner's Manual Willing to sell without some/all accessories at a discount. Inquire if interested. Local pickup welcome. Machine can be viewed under power in Roseville, MI if desired. $50 handling fee to palletize and load on common carrier freight. We are able to set up common carrier freight and include it in your purchase price. But the buyer is responsible for the additional fees imposed by eBay on the cost of the freight(we would still give you a quote for approval) No international shipping. Machine Specs: Processes: AC/DC TIG(GTAW) Stick(SMAW) Pulsed AC/DC TIG(GTAW) Input Power: 220v Single Phase Rated Output: 250A@ 30 VAC. 40% Duty Cycle/ 200A@ 28 VAC, 60% Duty Cycle Welding Amperage: 3-310 Amps Features: Syncro Start for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on vario
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG-STICK Arc WELDER 110/120V -208/240V
Purchased used on Ebay. Up for sale for upgraded model. No issues with this unit. Welds on AC with perfect beads on.25 aluminum. Welds perfect on DC. No cables or plug with unit.
|
|
|
Miller Dynasty 200 DX Stick & Tig Welder 110/120V and 208/240 Electric
Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords for 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG / STICK W/FOOT Contractor KIT
This is A Miller Dynasty 200 DX it is used. I have welded with this machine about 8 times I am not a welder. I wanted to learn so I purchase this machine, and a new welding helmet, Arc one auto darkaning top of the line very nice! I also have the Contractor Kit with foot peddle, everything like new see photos
|
|
 |