|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$8.00 Shipping Condition: New – Open box Location: Bandon, United States
Buy It Now
$200.00 Shipping Condition: Used Location: Sacramento, United States (1) Topcon Dual MCi4 with 900mhz radio. -(2) Topcon Antennas. The MCi4 has a 900mhz radio as well as long Link. Local pick-up is fine. BANK CERTIFIED ... moreCASHIERS CHECK. LOCAL PICK UP IS ALWAYS AN OPTION.
Buy It Now
$350.00 Shipping Condition: Used Location: Sacramento, United States The MC-R3 Dual mag box has the MC2 boards and 900mhz internal radio. It includes 2 antennas. -(1) Topcon Dual MCR3 with MC2 enabled and 900mhz Radio. ... more-(2) Topcon Antennas. BANK CERTIFIED CASHIERS CHECK.
Buy It Now
$250.00 Shipping Condition: Used Location: Sacramento, United States This set up is in. mhz frequency internal radio. These receivers have many options enabled including L1, L2, L2c, Glonass. These receivers have everything ... moreneeded to get you back to work and making money!
Buy It Now
$37.99 Shipping Condition: Used Location: Southgate, United States Trimble SNR930 900 MHz Machine Radio. Trimble SNR 930 900 MHz Machine Radio w/ Antenna [ID- X3122-L/T ]. Trimble SNR 930 Receiver On-Machine Radios. Single-band ... more900 MHz.
Buy It Now
$69.40 Shipping Condition: New – Open box Location: San Diego, United States About Trimble GCS Flex SNM940 Connected Site Gateway ( S N# 5535500488 ). Kit (STS153 7 New ) Contains.
Buy It Now
$68.00 Shipping Condition: Used Location: Brush Prairie, United States Trimble R750 GNSS Base Station. This kit includes a Trimble R750 Base Station and a Trimble R780 Rover Receiver, which are primarily used in the Construction ... moreTrade. Trimble R780 GNSS Rover Receiver. 1 - Trimble Zephyr Geodetic Model 3 Antenna.
Buy It Now
$85.24 Shipping Condition: Used Location: Southgate, United States [Topcon GC-35 & P-32 System's Not Included]. A temperature bail compensates for rapid air temperature changes. In milling applications, always use a temperature ... morebail. - Field replaceable sonic transducers.
Buy It Now
$100.99 Shipping Condition: For parts or not working Location: China For more info you can search in internet. ITEM SUCH AS PHOTO.
Buy It Now
$63.51 Shipping Condition: Used Location: Southgate, United States Using two GNSS antennas, the exact position of the bucket, blade or drum is calculated along with very accurate cross slope and heading. Caterpillar MS992 ... moreSmart Antenna GNSS Receiver. - Enable GLONASS.
Buy It Now
$490.00 Shipping Condition: Used Location: Morocco 1 Trimble Battery (No warranty). Great shape, slightly used, very clean, 100% working condition! I am always happy to help. Serial Number : 71420155.
Buy It Now
$40.00 Shipping Condition: Used Location: Wesley Chapel, United States The system can be used with surveying. The radio inside the Explorer 600+ will connect to the base radio at the robotic. each other based on the serial ... morenumber of the base radio. The user simply has to choose.
Buy It Now
$63.51 Shipping Condition: Used Location: Southgate, United States GCS900 Software Version: 13.13. File transfer and archiving rules prevent operators from accidentally deleting or overwriting files on the CB460. Enhanced ... moreOperator Experience on all GCS900 Machine Types.
Buy It Now
$181.91 Shipping Condition: Used Location: Canada
Buy It Now
$200.00 Shipping Condition: Used Location: Sacramento, United States It includes a PG-S3 antenna. -(1) Topcon Single MCR3 with MC2 enabled. -(1) Topcon PG-S3 Antennas. BANK CERTIFIED CASHIERS CHECK. LOCAL PICK UP IS ALWAYS ... moreAN OPTION. THAT WAY YOU CAN SEE IT WORK IN PERSON.
Buy It Now
$114.92 Shipping Condition: New Location: Canada DESCRIPTION: Trimble Coil Cable PN 0395-9450 REV E Coil cable for Trimble GCS900 systems. MS990, MS992 10 pin male to 16 pin Female. Cable is not in original ... morepackaging but it is new. INCLUDES: Trimble Coil Cable* I am still building my eBay profile and while my feedback is low. I am very knowledgeable with Trimble products and very familiar with eBay Please read my entire listing and ask any and all questions prior to bidding All of my equipment is tested for proper working function and cleaned prior to shipping All payments must be made within 3 days of auction end or the item will be re-listed All Buy It Now listings require immediate payment My goal is to provide quality products. Excellent customer service and fast shipping. I will leave feedback once I know you are happy with your purchase and hope I have earned 5 Star 100% positive feedback from you. Check out my! I have lots of inventory right now. Happy Bidding! NOTES: None WARRANTY: None SHIPPING: I use UPS or FedEx for shipping I use USPS Priority Shipping for items under $150 I will ship within 2 business days once payment has cleared Tracking number provided once item is shipped I will combine shipping on items won within 24 hours of each other. Please contact me if you plan on bidding on multiple items and I will invoice you with an adjusted shipping rate International buyers please contact me prior to bidding PAYMENT: Paypal within 3 days of auction end or immediate with Buy It Now RETURNS: I do my best to make sure I have described my listings accurately. All of my items
Buy It Now
$125.00 Shipping Condition: Used Location: Sacramento, United States This set up is in good condition and ready to go to work. -Trimble CB460 w/ GCS900. SNR930 450mhz radio NEW. MS975 Receiver's. BANK CERTIFIED CASHIERS ... moreCHECK. LOCAL PICK UP IS ALWAYS AN OPTION. THAT WAY YOU CAN SEE IT WORK IN PERSON.
Buy It Now
$136.00 Shipping Condition: Used Location: Brush Prairie, United States This kit includes a Trimble R750 Base Station and a Trimble R780 Rover Receiver, which are primarily used in the Construction Trade. This kit also includes ... morea Trimble T7 Tablet with SCS900 and Siteworks Software.
Buy It Now
$111.40 Shipping Condition: Used Location: Hong Kong SAR China This listing included:1 x Trimble 0367-2000 Machine Control Interface Box CLS02942*No accessories included*Condition:Exactly as PhotoFunction Tested:Power ... moreon TestedLCD Tested*NO FURTHER TESTED**NO RETURN SOLD AS IS*
Buy It Now
Free Shipping Condition: Seller refurbished Location: Meridian, United States Trimble CB460 Option Keys (3) CAT ACCUGRADE GCS900 Quick Start Guide Booklets. Generic = 3D Indicate. Grader = 3D Indicate. Soil Compactor = 3D Indicate. ... moreRubbe Tire Dozer = 3D Indicate. Motor Scraper = 3D Indicate.
Buy It Now
$82.17 Shipping Condition: New Location: Eastpointe, United States The LL300N's self-leveling capability results in outstanding accuracy and ease of use. Since the LL300N levels itself when turned on, setting up is easy ... morewith just one button press. The automatic, self-leveling Spectra Precision Laser LL300N is the most rugged laser level in it's class.
Buy It Now
Free Shipping Condition: New Location: Eastpointe, United States Designed to be used on the toughest jobsites the GL612N and GL622N can withstand a 1m (3 feet). Spectra Laser GL612N Single Grade Laser HL760 Receiver. ... moreWireless communication between the receiver and the laser allows advanced functionality such as Automatic Grade Matching to be achieved.
Buy It Now
$17.98 Shipping Condition: Used Location: Plano, United States One antenna for the price only 2 available. Tested antenna is in Excellent working condition.
Buy It Now
$360.72 Shipping Condition: Used Location: West Swan, Australia Model: 4400LR. 3D SCANNING SURVEY LASER. Type: 3D Survey Scanner. The machine gives out a red sighting beam and the sighting lens focuses, however it ... morewill need cleaning. Accessories: Tribrach, Hard Case, Spare Remote.
Buy It Now
$85.24 Shipping Condition: Used Location: Southgate, United States It is the easiest base station on the market – just put it on the tripod, switch it on, and you’re ready to go. The Trimble Web UI™ eliminates the need ... moreto travel to the job site for routine monitoring of the established base station.
Buy It Now
$70.00 Shipping Condition: Used Location: Sacramento, United States It will integrate with your existing Topcon MC2 system. BANK CERTIFIED CASHIERS CHECK. LOCAL PICK UP IS ALWAYS AN OPTION. THAT WAY YOU CAN SEE IT WORK ... moreIN PERSON. We do my very best to describe item's to the best of our ability and send them out as quick as possible to minimize delay's.
Buy It Now
$136.00 Shipping Condition: Used Location: Brush Prairie, United States This kit also includes a Trimble T7 Tablet with SCS900 & Siteworks Software. - Siteworks Software. Trimble T7 Tablet. 1 - Trimble Transport Case. - Internal ... more900 MHz Tx Radio. 1 - 900 Mhz Radio Antenna.
Buy It Now
$250.00 Shipping Condition: Used Location: Sacramento, United States This set up is in. mhz frequency internal radio. These receivers have many options enabled including L1, L2, L2c, Glonass. These receivers have everything ... moreneeded to get you back to work and making money!
Buy It Now
$198.00 Shipping Condition: Used Location: Brush Prairie, United States The kit also includes a Trimble T7 Tablet with SCS900 and Siteworks Software. - Trimble SCS900 Software. 1 - Trimble Zephyr Geodetic Model 3 Antenna. ... moreTrimble T7 Tablet. 1 - Trimble Transport Case. - Trimble Siteworks Software.
Buy It Now
$75.47 Shipping Condition: Used Location: Spokane, United States THE EAGL 3 SERIES Spectra Precision Laserplane 1145-S single slope laser level was built from the ground up with long range and precise grade applications ... morein mind. From agricultural land leveling to large commercial sites. There isn't another laser available that can deliver slope this accurately or easily. Accurate. Stable and reliable, Laserplane 1145-S is ideal for longer range measurements across your entire site. Large electronic self-leveling range. Direct entry grades up to 9.9% and 2000 feet of working range makes the Laserplane 1145-S the optimum single slope laser level. Laserplane 1145-S internal mechanical systems(grade devices, self-leveling, optical and chassis) use the highest quality aluminum, brass and stainless steel that are precisely machined to exact specifications. Circuit boards utilize first class, top-of-the-line electronic components. The Laserplane 1145-S is designed to last… no fragile metal stampings, plastic mechanical internal parts or low quality electronic components are used. Spectra Precision 1145-S is built JOBSITE TOUGH! Slope control has never been this easy. In fact, the 1145-S is so easy to use that even a novice grade checker can operate it like a pro, increasing productivity. Whether you're working on flat pads or slopes, the Laserplane 1145-S provides an accurate elevation reference that's compatible with all laser receivers and grade checking sensors. Spectra's waterproof housing ensures maximum productivity anytime. Anywhere. Spectra Precision 1145-S laser level has a WORKING RANGE of 2000 FEET and ACCURACY of 3/32" 100 FEET with SLOPE RANGE UP TO 9.9% PREVIOUS OWNERS NAME IS ON THE LASER. TOP PART OF THE CARRYING CASE HAD A CRACK WHICH AHS BEEN FIXED. THIS LASER LEVEL HAS BEEN COMPLETELY SERVICED AND CALIBRATED FOR THIS SALE THIS SALE INCLUDES: Spectra Precision 1145-S slope laser Spectra Precision HR500 laser detector Detector bracket New rechargeable battery pack 12V power cable Battery charger Carrying case TRIPOD IS NOT INCLUDED BY PLACING A B
Buy It Now
$250.00 Shipping Condition: Seller refurbished Location: Poland Trimble TS battery, qty 2. Trimble 360 prism, qty 1. Trimble yellow transport case, qty 1. Trimble CU (TCU) + robotic holder (+500 USD). TSC7 2.4GHz (ask ... morefor price). TSC5 2.4GHz (ask for price).
Buy It Now
$52.27 Shipping Condition: New Location: Waipahu, United States Cat Field Installation Assembly, Product Link PL641 3G Cellular Radio. High quality accessories, installation kits, adaptors, and converters for Cat machine ... moreradios. Height (in): 3.2. Length (in): 6.5.
Buy It Now
$10.40 Shipping Condition: New Location: Waipahu, United States Heavy-Duty Magnet (p/n 8241316). Bolt Kit (p/n 8241774). Leica Heavy-Duty 1.4" Magnet with Bolt Kit. (4) M6 Split lock washer, zinc. (4) M6-1.00 Nylon ... morelock nut, zinc. (4) M6 Flat washer, zinc. Local Pickup (O'ahu, HI) No Extra Cost.
Buy It Now
$136.00 Shipping Condition: Used Location: Brush Prairie, United States This kit includes a set of Topcon GR-5 Receivers which are primarily used in the Construction Trade. This kit also includes a Topcon FC-5000 Tablet with ... morePocket-3D Software. Topcon GR-5 Base/Rover Receiver Kit.
Buy It Now
Free Shipping Condition: New Location: China ADD TO FAVS. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality. The item in the actual ... moreuse of the process of quality problems.
Buy It Now
$120.80 Shipping Condition: New Location: Mountlake Terrace, United States
Buy It Now
$10.40 Shipping Condition: New Location: Waipahu, United States External WiFi Antenna (p/n 845196). Leica External WiFi Antenna. Local Pickup (O'ahu, HI) No Extra Cost. T erms of Sale.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Meridian, United States If there is any issue, reach out to us prior so that we can help. The unit is running on version V5.52. We take our own photos.
Buy It Now
$63.51 Shipping Condition: Used Location: Southgate, United States It is the easiest base station on the market – just put it on the tripod, switch it on, and you’re ready to go. The Trimble Web UI™ eliminates the need ... moreto travel to the job site for routine monitoring of the established base station.
Buy It Now
$216.40 Shipping Condition: Used Location: Hong Kong SAR China This listing included:1 x Trimble 0365-1140 Machine Control Interface Box CLS01422*No accessories included*Condition:Exactly as PhotoFunction Tested:*NO ... moreFURTHER TESTED**NO RETURN SOLD AS IS*
Buy It Now
$186.40 Shipping Condition: Used Location: Hong Kong SAR China This listing included:1 x Topcon 9901-0027 410-470Mhz 3D GPS Machine Control Box CLS03060*No accessories included*Condition:Exactly as PhotoFunction Tested:Power ... moreon TestedSatellite Well Detected*NO FURTHER TESTED**NO RETURN SOLD AS IS*
Buy It Now
$37.99 Shipping Condition: Used Location: Southgate, United States Caterpillar MS992 Smart Antenna GNSS Receiver. Using two GNSS antennas, the exact position of the bucket, blade or drum is calculated along with very ... moreaccurate cross slope and heading. - Enable GLONASS.
Buy It Now
$85.24 Shipping Condition: Used Location: Southgate, United States [Topcon GC-35 & P-32 System's Not Included]. A temperature bail compensates for rapid air temperature changes. In milling applications, always use a temperature ... morebail. - Field replaceable sonic transducers.
Buy It Now
$188.23 Shipping Condition: New Location: DEESIDE, United Kingdom TS Shield is Topcon’s patented security system is the ultimate tool for theft protection! In the event of theft, simply log on to TS shield and shut the ... moretotal station down! Sealand Survey Centre Limited.
Buy It Now
$14.25 Shipping Condition: New Location: Jonesboro, United States NEW Trimble Lightbar Cable Part Number 54438 for grade control systems. Has 3-pin grey connect or t hat splits to three 4-hole connectors. NEW# 2 4 Final ... moresale-item delivered a s described
Buy It Now
$200.00 Shipping Condition: Used Location: Sacramento, United States (1) Topcon Dual MCi4 with 900mhz radio. -(2) Topcon Antennas. The MCi4 has a 900mhz radio as well as long Link. Local pick-up is fine. BANK CERTIFIED ... moreCASHIERS CHECK. LOCAL PICK UP IS ALWAYS AN OPTION.
Buy It Now
$69.40 Shipping Condition: Used Location: San Diego, United States About Trimble GCS Flex SNM940 Connected Site Gateway ( S N# 5533500547 ). Kit (STS1536 Used) Contains.
Buy It Now
$98.00 Shipping Condition: Used Location: Brush Prairie, United States This kit includes a set of Topcon GR-5 Plus Receivers which are primarily used in the Construction Trade. The kit also includes a Topcon FC-5000 Tablet ... morewith Pocket-3D Software. Topcon Dual GR-5+ Base/Rover Receiver Kit.
Buy It Now
$85.24 Shipping Condition: Used Location: Southgate, United States SCS900 V2.42 Build 15. Trimble TSC2 2.4 GHz Data Collector w/ Case & Options. [ID- X2290-L/T ]. And your survey team only needs to know one interface. ... moreUsing an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office.
Buy It Now
$67.73 Shipping Condition: New Location: Eastpointe, United States Spectra Laser LL500-4 HL700 Receiver NiMH Batteries. NiMH Batteries. Spectra Laser Receiver Model No. View Our Complete Line of Spectra Construction Laser ... moreLevels.
Buy It Now
$244.70 Shipping Condition: Used Location: BIRMINGHAM, United Kingdom Spectra Precision LR30 laser dis The Spectra Precision Laser LR60 Laser Display Receiver is designed to be used as a stand-alone display receiver on grading ... moreand excavating equipment including: dozers. Excavators, backhoes, scrapers, and box blades. For excavators and backhoes, the LR60 laser receiver features patented Angle Compensation which automatically calculates and corrects the grade display for the angle of the dipper arm. The easy-to-use LR60 features versatile 360-degree laser reception and works with all types of rotating lasers on all types of machinery for fast, no-hassle setup. Rugged and waterproof, the LR60 receiver withstands all weather environments. Spectra Precision MM1 magnetic pole mount works with all machine control clamp receivers and quickly attaches to the dipper arms of excavators or backhoes. Strong dual magnet packs will not slip on the machine and are adjustable for quick installation and set up. Release lever aids in detaching from machine. Features Check grade with the dipper arm extended or retracted up to 30 degrees. Built-in plumb indicator for fast. Accurate grade checking for graders. Center On-grade provides an equal amount of grade information above and below on-grade. Use on dozers. Graders, scrapers and box blades. Offset on-grade for productive excavation provides additional above grade information for less undercuts. Up to eight channels of grade information plus directional out-of-beam indicators. Four selectable accuracies for each on-grade location. Use as standalone display receiver or with for an affordable blade control solution. Used with. Used on: Excavators, Dozers, Graders, Scrapers, Skid Steers, Box Blades, Levelers, Kilvers, THIS SALE INCLUDES: Spectra Precision LR60 receiver Spectra Precision MM1 mag mount. Users manual Tape measure. Carrying case BY PLACING A BID YOU AGREE TO THE TERMS OF SALE TERMS OF SALE: Winning an auction is Agreeing to purchase the item. PLEASE READ THE DESCRIPTION. LOOK AT PICTURES, RESEARCH THE ITEM THAT YOU ARE BIDDING ON
Buy It Now
$188.23 Shipping Condition: Seller refurbished Location: DEESIDE, United Kingdom TS Shield is Topcon’s patented security system is the ultimate tool for theft protection! In the event of theft, simply log on to TS shield and shut the ... moretotal station down! Sealand Survey Centre Limited.
Buy It Now
$120.80 Shipping Condition: New Location: Mountlake Terrace, United States
Buy It Now
$37.99 Shipping Condition: Used Location: Southgate, United States Trimble SNR920 900 MHz On Machine Radio [ID- X3950-L/T ]. Trimble SNR920 On Machine Radio. - This Unit Was Serviced By A Trimble Authorized Service Center. ... more- 902 - 928 MHz Internal Radio. Susceptibility: Compliant with CE, FCC Part 15.
Buy It Now
$98.00 Shipping Condition: Used Location: Brush Prairie, United States This kit also includes a Trimble T7 Tablet with Siteworks and SCS900 Software. - Trimble Siteworks Software V. 1.70. Condition: This kit is in great working ... morecondition! 1 - Trimble Zephyr Model 2 Antenna.
Buy It Now
$32.79 Shipping Condition: Brand New Location: Brighton East, Australia Both however are not currently listed.
Buy It Now
$75.47 Shipping Condition: Used Location: Spokane, United States THE EAGL 3 SERIES Spectra Precision Laserplane 1145-S single slope laser level was built from the ground up with long range and precise grade applications ... morein mind. From agricultural land leveling to large commercial sites. There isn't another laser available that can deliver slope this accurately or easily. Accurate. Stable and reliable, Laserplane 1145-S is ideal for longer range measurements across your entire site. Large electronic self-leveling range. Direct entry grades up to 9.9% and 2000 feet of working range makes the Laserplane 1145-S the optimum single slope laser level. Laserplane 1145-S internal mechanical systems(grade devices, self-leveling, optical and chassis) use the highest quality aluminum, brass and stainless steel that are precisely machined to exact specifications. Circuit boards utilize first class, top-of-the-line electronic components. The Laserplane 1145-S is designed to last… no fragile metal stampings, plastic mechanical internal parts or low quality electronic components are used. Spectra Precision 1145-S is built JOBSITE TOUGH! Slope control has never been this easy. In fact, the 1145-S is so easy to use that even a novice grade checker can operate it like a pro, increasing productivity. Whether you're working on flat pads or slopes, the Laserplane 1145-S provides an accurate elevation reference that's compatible with all laser receivers and grade checking sensors. Spectra's waterproof housing ensures maximum productivity anytime. Anywhere. Spectra Precision 1145-S laser level has a WORKING RANGE of 2000 FEET and ACCURACY of 3/32" 100 FEET with SLOPE RANGE UP TO 9.9% PREVIOUS OWNERS NAME IS ON THE LASER. TOP PART OF THE CARRYING CASE HAD A CRACK WHICH AHS BEEN FIXED. THIS LASER LEVEL HAS BEEN COMPLETELY SERVICED AND CALIBRATED FOR THIS SALE THIS SALE INCLUDES: Spectra Precision 1145-S slope laser Spectra Precision HR500 laser detector Detector bracket New rechargeable battery pack 12V power cable Battery charger Carrying case TRIPOD IS NOT INCLUDED BY PLACING A B
Buy It Now
$52.27 Shipping Condition: New Location: Waipahu, United States Cat Field Installation Assembly, Product Link PL601 Network Manager. High quality accessories, installation kits, adaptors, and converters for Cat machine ... moreradios. Length (in): 9.09. Wire Length (in): 27.95.
Buy It Now
$63.94 Shipping Condition: New Location: United Kingdom The Tersus GeoBee30 is a dedicated and cost-effective solution to transmit or receive Ntrip corrections. GeoBee30 can also work as GNSS Rover to receive ... moreRTK corrections from Tersus Ntrip Caster or any CORS service.
Buy It Now
$10.40 Shipping Condition: New Location: Waipahu, United States MMB1468 4G Antenna Kit (p/n 864404). Includes window mount and holder for docking station (antenna not included). Holder for Docking Station. Window Mount.
|
|
|
|
Lektro Vend Vending Machine Control Board Snack vs99c Series II Working
Lektro Vend Vending Machine Control Board Snack vs99c Series II Working. I pulled it from a working machine we parted out also have the led display and key pad available. I also have the metal cover with white buttons for the board not pictured. I have over 100 refurbished location ready vending machines please call(541)359-9316 with questions Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141d9a866a6-0x10b-
|
|
|
Vintage 1950s Working Hi-Low Speed Control Machine Weisberg Mfg USA Industrial
Up for auction. A Vintage, 1950s, Working, Hi-Low Speed Control Machine. Made in the U.S.A. by Weisberg Manufacturing Company, in Los Angeles, California, this well built, heavy duty, aluminum cased, machine measures 5¾ inches tall, 4 inches across, 2¾ inches wide, and comes with a Calrad meter, and 6 feet long cord. They don't build them like this anymore. Great Buy. Thanks for bidding.
|
|
|
Bridgeport Motor Control Variable 0-100 Vintage Machine Shop Used Tested 100%
Bridgeport Motor Control Variable 0-100 Vintage Machine Shop Used Tested 100% Click to Enlarge Click to Enlarge Click to Enlarge Bridgeport Motor Control. Bench tested the switch 100% It was sucessful to Variable,Off, Full power. In Fair Condition, missing ground prong. Store Policies: The majority of these items have been acquired through business liquidations and Police auctions. I will do my best to describe and photograph these items but please understand I'm not the original owner. I'm happy to answer questions please email me and I will respond in 24-48hrs. We do our best as sellers to describe these items accurately. Buy items from the Television Show on"Baggage Battles" Travel Channel in U S. OLN In Canada, Quest in the UK, A&E in Au stralia. The Nifty Thrifty Location has been closed and moved to an online ma ... morerketplace! Inquire on items even if you do not see them on eBay. NYS TAX Applicable to Sales in NEW YORK STATE. 8.625% It will be automatically added to your invoice. Feedback: We ask the buyers to leave 5 stars on all categories in feedback. If you feel that we did not meet your expectations please allow us the opportunity to make this right. Add us to your favorite seller lists! Follow me on Twitter: MarkMeyerHere Like us on Facebook: MarkMeyerBB I will ship to USA. Canada, PR, Japan, UK, Australia. International Shipping is more difficult to estimate prices, please email for a price quote. I'm a good seller and will work with my customers to ship my product around the world. The BUYER is responsible for your local customs taxes, duties,or fees of imports. Thank you. I will not ship to some parts of Europe, Asia, Central or South America. Payment is acceptable by Paypal or Cash for local pickup(Long Island NY) If you use a check through paypal. Please be patient as I wait till the check clears before shipment. Thank you. New York State Sales Tax applicable, Tax Rate 8.625% Returns are Accepted for 14 days. Return Shipping is paid for by the buyer. On Items that have VIN o
|
|
|
Pfaff 1425-900 Walking Foot Machine, Top Electronic Control Box, Needle Position
Pfaff 1425-900 Walking Foot Machine. Top Electronic Control Box, Large Hook, Needle Positioner Thread Trimmer, Self-oiler, Back Taker, Fully Loaded Air System, Latest Model Made in Germany 220V 3-PH on SALE for $3,000.00 Table and Motor Complete Shipping Included within the Continental USA
|
|
|
Topcon 3D GPS GNSS RTK Dozer Grader Machine Control System 9168
Topcon 3D GPS GNSS RTK Dozer Grader Machine Control System 9168 Up for sale is a Topcon 3D GPS. GNSS machine control system. This system has been fully tested and is operating correctly. The firmware is version 6.11.03. This is the current Topcon Machine control system, and does track GPS and Glonass satellites. The unit has a 900MHz spread spectrum radio installed. Here are the options enabled: Bulldozer. Motograder. Elevating Scraper. Single Tow Scraper. Generic Machine. GPS(Topcon RTK) LPS(Total Station Controlled) Laserzone(Millimeter GPS) Automatics Blade Control. Sensor Inputs. The components included are: Topcon 9168 display control box· Topcon 9902 MagBox Machine Control GPS/GNSS receiver· Topcon PG-A3 GPS/GNSS Machine Control Antenna· One antenna cable(Not shown. But is included) Two Topcon Carrying cases for Display ... moreand MagBox Here is a list of the options on the MagBox receiver: GPS– Yes· Glonass– Yes· L1/L2– Yes· Cinderella– Yes· Position Update Rate 10Hz· Raw Data Update Rate 10Hz· RTK Base– Yes· RTK Rover– 10Hz· Co-Op Tracking– Yes Should you need machine specific cables. I can have them ordered for you, or any Topcon dealer should be able to acquire them. Buy it now price is $16.429 with Free US shipping. International shipping is available for an additional $375 using UPS. I am able to ship to most countries, but not all are available. If you are outside the USA, please verify that I can ship to your country by sending me your postcode. Should you have any questions, please feel free to send over an email. Thank you for viewing and have a great day! Normal 0 false false false EN-US X-NONE X-NONE jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-141dd8c00a5-0x101-
|
|
|
Fanuc System 6M Model B, CNC Machine Control, Maintenance Manual Year (1980)
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false M
|
|
|
SCOTSMAN ICE MACHINE CONTROL BOX COVER P/N A34877-003 USED VERY GOOD CONDITION
This is a used part but still is in great condition. There is a little bit of wear around the label area.
|
|
|
R-K Electronics ATB-24D-2 Anti-Tiedown-Timer Relay machine control 24VDC 8 pin
Just pulled from a very clean and hardly used machine panel 24V DC ATB-24D-2 anti tiedown timer
|
|
|
ROWE CHANGER COUNT CONTROL COMPUTER FOR BILL CHANGE MACHINE 65095206 Vending AS
ROWE CHANGER CONTROL I have a complete change machine that I am parting out because is too heavy for me to ship. Please see the picture. The part number, make sure this is the item you are looking for. Check out my! Unknown Working Condition We do not have the proper equipment to test. This item may be in good working condition but we do not know. Sale is final. AS IS
|
|
|
CHAUVET HURRICANE 1100 SMOKE MACHINE (INCLUDES CABLE REMOTE CONTROL)
CHAUVET HURRICANE 1100 SMOKE MACHINE(INCLUDES CABLE REMOTE CONTROL)
|
|
|
NUOVA SIMONELLI CONTROL PANEL SWITCH 115 V FITS FROZEN DRINK MACHINE ON/OFF
Sale is for One(1) USED NUOVA SIMONELLI ELCO SWITCH/ CONTROL PANEL If you have a NUOVA SIMONELLI CRISTAL HORIZON frozen drink machine you know this is a very hard to find part this was removed from my own machine This has light scratches and a little dirt shown in the photo's This has been tested and works This is wired for 115 volt single phase right now but can be wired for 230 volt operation also This comes as shown The Panel in the photos is the one you will receive Specs; Manufacturer- NUOVA SIMONELLI ELCO Fits Model- NF 15097 Volts- 115/230 volts VAC Phase-Single phase Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 Location- A-5-1 We Combine Shipping Thanks Kurt;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141ea419c3e-0x105-
|
|
|
Dixie Narco glassfront vending machine main control board.
New Page 1 A Dixie Narco main control board for a glassfront soda beverage vending machine. DIX62603210003 machine board. Other part numbers 804.915,19X.X1& 42360373. Version 161.01 CGFV machine board. It has been tested and works fine. Please view photos below of this item.
|
|
|
2 Laser Alignment Cab 360 Laser Receiver Machine Control and One Cab Display
2 Two Laser Alignment Cab(Cab Constant Accuracy) 360 laser receiver. 1 One Cab Display. 2 Cable Sensor to Display. 1 Battery Cable. 2 yellow Hard Case for Carry. 1 bracket for Display in Cab(not pictured but include) Features: Larger working range. Selectable accuracy. 360° reception. Rugged and waterproof design. Heavy duty construction. Selectable Bright/ Dim Display. Hi. I sell This receiver is used but in Great shape and ready to go to work. Normal scratches from use. The best equipment for control machine for Moto-grader o Dual Scrapper in Agriculture. We used last week and works very fine.
|
|
|
TRIMBLE SITE VISION SV170 CONTROL MACHINE for PARTS ONLY or FIX
The Bid is for a TRIMBLE ACCUGRADE CONTROL SYSTEM SV170 FOR PARTS ONLY OR FIX. WHAT YOU SEE IS WHAT YOU GET winner pays for shipping and handle $25.00 to the lower 48 states. Must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good luck Posted with the Posted with
|
|
|
LOT OF ELECTRIC MACHINE CONTROL SWITCHES push button ALLEN BRADLEY USA 800T
used box and switches Allen Bradley 800T came in a lot from a sale- not tested- sold as is please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GPX JM250S Karaoke Party Machine 5.5" Monitor Echo Control Microphone Singing
Most orders ship in 24 hours: Home About us Feedback Payment Options Shipping Info Contact us Store search: Store categories. GPX JM250S Karaoke Party Machine 5.5" Monitor Echo Control Microphone. Click on above image to view full picture Click on above image to view full picture Click on above image to view full picture Click on above image to view full picture Click on above image to view full picture Click on above image to view full picture More views: New Page 2 Manufacturer GPX Model number JM250S SKU HEGP001 Package Condition Slightly used. Customer return item. excellent working condition, has some minor scratches. Contents Karaoke machine. Microphone, AC Adapter, Audio cable Warranty 30 days Features CD player: CD. CD-R/RW, CD+G 5.5” black and white monitor Echo control AVC control 2 Digit red LED display 2- 6.3mm microphone ... morejacks Audio/video RCA input Audio/video RCA output DC power input: requires an AC/DC power adapter(included) New Page 4 Compeve corporation accepts PayPal payments. Visa, MasterCard, American Express, Discover credit cards and E-checks through PayPal. Payments are accepted from confirmed PayPal addresses. Prepayment is also accepted by cashier or certified check. Company checks are accepted upon approval only and will be held for a minimum of 3 business days prior to shipping merchandise. All international buyers must contact us prior making a purchase. Regarding international payment options. Illinois residents please add 8% sales tax. New Page 5 All products are being shipped the same day or within 24 hours after payment is received. Monday through Friday. We do not ship on major Holidays. Most products are being shipped via FedEx. We also ship via UPS. USPS, DHL. Shipping is at buyers expense. Shipping will be calculated and billed at published rates. A handling charge and insurance is included in auction price. We do not offer local pick-ups. If your address at the time of purchase is not correct. Or if you have not updated it prior to making a payment, we are not responsibl
|
|
|
Antique Vtg Singer Bentwood Case Knee Control Wire blocks Sewing Machine Part
This is a guaranteed sale for an Original Antique Vintage Singer Bentwood Case part in used usable condition with some detail cleaning possibly needed. The item pictured is the one you will receive and shows the condition of the finish. I sell alot of Singer items and am confident you will be satisfied with your item. The item has been visually inspected. Is pretty clean and if you have any problem with it I will refund total amt paid no questions asked with no return neccessary. Please view all photos and Email with questions T hanks All I items I sell are 100% guaranteed as described. VISIT MY STORE FOR MORE ITEMS LIKE THIS Addtl Info: This sale is for an original Singer sewing machine item in good condition with some finish wear/use/age marks. As with all items of this nature some cleaning/work may be needed. Beyond what is noted there ... moremay be additional minor surface flaws. Shipping Policy: I guarantee all items to arrive in"as purchased" condition. I will combine/ flat rate as much as will safely fit.
|
|
|
AP 111, 112 113 main control board snack vending machine, P# 360165 Tested Good
New Page 1 Auotomatic Products main control board for models 111. 112 and 113( AP111. AP 112& AP113) The manuf. part no. is 360165. It has been tested and works fine. Please view photos below of this item.
|
|
|
Fog Lite F/X Fog Machine w/ Timer Control + One Gallon Fog Juice
Everything is tested to work perfectly and is in nice cosmetic shape. 700 watts usage. Model 1741. Fluid bottle is unopened. Posted with eBay Mobile.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141fab9233f-0xfb-
|
|
|
CNC Milling Machine - Machining Center, Anilam Control
Machine is in excellent condition. Regularly maintained and supported by HH Roberts Machinery in Mississauga. Machine has never been abused, mostly used on aluminum& plastic parts. Spindle fully re-built in 2011. Runout virtually unmeasurable ~0.0001" Axis Backlash 0.0001" Includes 3 Phase Isolation Transformer. Needs 208-230/460 or 600 VAC 3PH 60 Hz Fully configured for network file transfer- no drip feed- just copy the file from the server. Contact Seller for more information. Unit can be seen under power in Toronto. Frame& Bed made in Taiwan. Control made in Germany& USA Weight: 6,800 Lbs Also available for this machine. But not included in this auction are 2 Kurt Vices. 47 CAT40 Tool Holders in various sizes(most are for ER16& ER32 collets) 30,000 RPM Air Spindle, D'Andrea Boring Head, Carbide Tooling, Aluminum ... moreStock, etc. etc. Shipping cost NOT Included: dependent on location. Can recommend machinery mover. Ground level. No dock.
|
|
|
Ground Fogger Fog Machine remote control cord with manual switch Smoke Maker
We sold the fog machine previously then found this remote control unit- works great! It is very convenient to be able to turn it on and off remotely. Sorry. Don't recall the brand name of the machine but if you see the 3 prong plug adapter on your machine this should work great! =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- I ship fast and there is tracking/delivery confirmation included- pay before noon EST and it will likely go out same day! Check my ratings and buy with confidence! Check out my other eBay listings: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- General Info: If you have any questions. Please feel free to email or call me and I'll answer them to the best of my ability. My items come from a smoke-free. Pet-free ... morehome. All of my auctions are No Reserve unless specified otherwise! Shipping/Handling: If you buy this or pay for the auction before 10am ET. Chances are good I'll be able to ship it out the same day! If you want faster shipping than what is displayed or offered. Please ask and if I can do it I'll email you an invoice for the difference at cost! Da Rules: Please only buy/bid if you have an active PayPal account and can pay in full for your item and shipping within 3 days of purchase/auction end. Unpaid(within 3 days) purchases/auction wins will be forfeited and item will be relisted. Thank you for looking and Good Luck bidding! =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
|
|
|
Old Antique Vintage Singer Sewing Machine Foot Pedal Motor Control Part # 194588
Old Antique Vintage Singer Sewing Machine Foot Pedal Motor Control Part# 194588. Thanks for Looking and Happy Bidding. eBay is now gets a percentage of the cost of shipping. This means the sellers must charge more shipping fees to make up the difference or else it will end up costing us to ship items to you our customers.Please take this into consideration when buying.this is a really unfair practice, they make plenty of money off the product with-out making money off the shipping also, normally I make barely enough to pay shipping fees, paper, and ink to print postage now they charge additional fees, therefore, I have to charge my customers more.
|
|
|
MIKROFYN MIKROLASER ML4 DUAL SLOPE GRADE LASER LEVEL MACHINE CONTROL TOPCON
MIKROFYN MIKROLASER ML4 DUAL SLOPE GRADER LASER LEVEL MACHINE CONTROL Up for sale is a used but in great working condition Mikrolaser ML4 dual grade laser level. These are pictures of the actual item up for sale. It has been tested and is fully functional. Comes with case. 2 batteries, charger, owners manual, remote control and laser receiver. Free shipping to anywhere in the lower 48 states only. Alaska and Hawaii please email me for shipping cost. I will only ship to a Paypal confirmed address. Please review me feedback and bid with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup ... moreavailable. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Add me to your Favorite Sellers View My Other Items For Sale Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund.
|
|
|
manitowoc ice machine, control board,,hoshizaki,scottsman,refrigeration
This control board and pump came off a q 1800 machine due to evaporator plate bad. When unit was running. Control board is good. Control board can fit any j or q models.
|
|
|
Cohu 4982-2001 Camera Control Unit Machine Vision/ Microscope 12V / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Cohu 4982-2001 Camera Control Unit Machine Vision/ Microscope 12V/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Cohu 4982-2001 Camera Control Unit Machine Vision/ Microscope 12V/ Warranty Used Condition Cohu Camera Control Unit Machine Vision. Microscope Camera Controller P/N: 4982-2001 Voltage: 12V AC/DC Inventory Number: 2O81257-10-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) ... morePayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS for all domestic and international orders. However we may
|
|
|
Southwestern SWI TRAK-TRM Knee Mill CNC Milling Machine w/ProtoTRAK MX2 Control
SKU: 2479072 A: 0013000000CXCfg O: 0065000000OyDiJ PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Southwestern Industries/SWI TRAK-TRM Knee Mill CNC Milling Machine w/ProtoTRAK Control. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Southwestern Industries/SWI Model: TRAK-TRM Type: Vertical CNC Knee Mill Serial ... moreNo: 95-604 Features/Specifications: Control: ProtoTRAK MX2 w/pendant switch Travels: X-Axis: 31" Y-Axis: 17" Knee/Vertical: 23-1/2" Quill: 5" Table Size: 10" x 50" Servo Turbo Drive rapid traverse on knee axis JinShin Motor: 3 HP- 220/440V- 8.5/4.25A 1720 RPM- 60 Hz- 3 PH Variable Speed: Low: 70-500 RPM High: 600-4200 RPM Taper Size: No. 40 Kurt Power Lock auto drawbar Oiler/lubrication system Adjustable light Power cabinet Dimensions& Weight: Machine Dimensions: L 68" x W 71" x H 80" Shipping Weight: 4.250 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in a working industrial environment Regular. Thorough maintenance performed by previous owner since new Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Si
|
|
|
CNC Milling Machine YCM-60 with Bandit 1 Control
YCM-60 CNC Milling Machine with Tool Changer. Bandit 1 CNC control. 6000 rpm AC spindle. 40 taper. Travel 35" x 18" x 6.5" Vertical knee travel 17" Ram travel 18" Table size 38" x 15" Weight 7400 lbs. Tight machine. Use as is or good for retrofit of newer control. Tool holders available. Under power. Buyer responsible for rigging and transportation. Selling to US only. Machine located in Wilmington Ma 01887 Payment via PayPal. Wire Transfer or Certified Check
|
|
|
Acme 1000 VA Machine Tool Control Transformer TA-81171
Acme 1000 VA Machine Tool Control Transformer TA-81171 THIS TRANSFORMER IS USED. THIS TRANSFORMER WAS TAKEN OUT OF A MACHINE AND HAS SOME COSMETIC WEAR. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# TA-81171 APPROX. PRODUCT DIMENSIONS: WIDTH: 10" LENGTH: 5.5" HEIGHT: 4.5" SHIPPING WEIGHT 40 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US
|
|
|
Trimble MS992 Receiver for Trimble/Cat Machine Control GPS GNSS GCS900 Cable
Trimble MS992 Receiver This Includes: 1- Trimble MS992 Receiver 1- Coil Cable 1- Mast Mount 30 Day Warranty Includes Quick Connect Ratchet and Carrying Handle This is for Trimble GCS900 and Cat Machine Control. And is the current model being sold. This receives GNSS and GPS Satellites and has a faster refresh rate than the MS990. Condition: This is in good used tested condition. It has a few scuffs. This includes a 30 day warranty. Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Cashier's checks and wire transfers. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns ... morefor 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 75.4.
|
|
|
USI 3037-7 soda pop vending machine main control board
For sale is one main control board removed from a USI 3037 7 select soda pop vending machine. This board was in perfect working condition when removed; the machine had other damage to it. This item will work in other machines. But make sure it will work in YOURS before ordering.
|
|
|
Trimble MS860 ll GPS Receiver For Sitevision GPS Machine Control 2
Trimble MS860 ll GPS Receiver For Sitevision Machine Control Condition: This is in excellent used condition. And has been tested working on our machine. Please email or contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Cashier's and Company Checks, and Wire Transfers. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. ... moreWarranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 8350.
|
|
|
1997! BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE - EZ-TRAK DX CONTROL
aims 1997! BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE- EZ-TRAK DX CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a used EZ-TRAK 2-Axis CNC Milling Machine in GREAT condition. We will have a video of this machine running in the following days. A url link will be added to the first photo. Model# EZ-TRAK Serial# BR276217E Date of Manufacture: 1997 Here is some information from Bridgeport: This is the EZ-TRAK CNC Milling Machine. Combine the Series I with an easy-to-use control. And you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its three-axis control has a fully adjustable, flat screen Monitor that prompts for all machining ... moredata and signals the operator when an action is required. The control can store up to 1.000 operations. The EZ TRAK also features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways with covers and a centralized, one shot lubrication system ensure a long machine life. Features: Rigid. One-Piece Column and Base Integrally Cast with Added Ribs. Hard Chrome-Plated Quill. Proven resale value! High demand caused many used Series I standards to sell for more than their original purchase price. Versatile-totally interchangeable parts. You choice of a full line of high productivity accessories and heads. Full support. Bridgeport stands behind every machine with nationwide parts and service. And application engineering support. Patented flow-through air cooling on 2J head prolongs bearing life and prevents expansion caused by heat build-up. Secure tools from 1/8" to 3/4" in a R8 collet. A quick adjustment micrometer nut allows rapid adjustment of the quill for long moves and can also be adjusted for fine positioning of.001" Sturdy. Coreless cast table, heavily ribbed for str
|
|
|
Vintage White Sewing Machine Motor, Light, Knee Control, Parts Antique 1920's
Vintage 1927 Dressmaster White Sewing machine parts. Includes the working motor. Light, and knee control.
|
|
|
COBE / GAMBRO PRISMA 018080 101 CONTROL UNIT / HEMODIALYSIS DIALYSIS MACHINE *
think green. Another quality listing from your trusted medical equipment source. Tekyard medical. Overview Cobe/ Gambro Prisma 018080 101 Control Unit/ Hemodialysis Dialysis Machine Item Location: tekyard NC Warehouse The item is as seen in pictures. Please refer to the pictures and text on this page for details. If you still have any questions please feel free to contact us. For Assistance Contact: Jonathan Sprinkle Direct Line# Skype Pictures: Look at the pictures these are of the actual item that you will be getting. Click on the pictures to super size them. Condition: Overall Condition Good Cosmetics Please view all pictures Completeness As seen in pictures You should have this item completely checked out prior to use in conjunction with patient care. We will stand by our equipment but will not take any responsibility for its use on patient. ... moreRefer to. Please note most of the medical equipment pieces need some maintenance and recertification. It is normal and legal requirement. We strongly recommend that you get proper certification prior to use and get the unit completely checked out. Rubber tubing's. Seals and such items often need to be replaced on a routinely bases for preventive maintenance on a lot of different types of equipment, It is recommended that they be replaced as per need basis. We remarket new and used equipment from hospitals and all our equipment comes directly from hospitals. All the equipment we post on eBay is either in our possession or has been thoroughly inspected by us. We don't list any items that are in bad shape or are not desirable. We don't fix or repair any items to make them usable. If we list any parts only items we specifically mention that in the listing. Accessories/ Cables: Comes with everything you see in pictures nothing more nothing less. Please look at pictures to see exactly what you will be getting. If it isn't in the pictures and is not specified here don't assume you will be getting it. If you still have questions please contact us. Shipping: Pl
|
|
|
EARLY CAST IRON SEWING MACHINE REOSTAT ELECTRIC FOOT SPEED CONTROL
EARLY CAST IRON SEWING MACHINE REOSTAT ELECTRIC FOOT SPEED CONTROL NO MANUFACTURER NAME. THE ONLY MARKING IS A SMALL"115 V" THE FRAME AND PEDAL ITSELF ARE HEAVY CAST IRON. THIS UNDOUBTEDLY DATES TO THE EARLY 20TH CENTURY AS SEWING MACHINES WERE BEING ELECTRIFIED. NO REPRESENTATION OF USABILITY QUITE THE CONTRARY I THINK THIS IS JUST A RELIC OF THE EARLIEST POWER MACHINES. 5 STARS DSRs(DETAILED SELLER RATINGS) ARE VERY IMPORTANT TO US, FIRSTLY IT IS OUR GOAL TO MAKE YOUR EXPERIENCE SHOPPING WITH US AS POSITIVE AS WE CAN. PLEASE GIVE US 5 STARS IN ALL CATEGORIES AND IF YOU FEEL YOU CANNOT PLEASE GIVE US THE OPPORTUNITY TO SATISFY YOUR CONCERNS BEFORE YOU LEAVE YOUR RATING. WE WANT YOU TO BE HAPPY WITH ALL ASPECTS OF YOUR PURCHASE AND HAVE OUR RATINGS REFLECT OUR COMMITMENT TO HIGH CUSTOMER SERVICE. Greetings Ebay shoppers, we are ... moreMike& Jean Waters, ebay dealers since 1998, we strive to bring unique items in a variety of categories to you, fresh from homes and estates we visit here in central Florida and our travels elsewhere. Our goal is to be as accurate as possible with descriptions, respond quickly and professionally to every inquiry and give superlative service after the sale. If you would like to speak to us directly you can reach us at(386) 871-7704. God bless and thanks for looking at our auction My Policies: Our shipping fee includes insurance for your item. sales taxes are collected for any item delivered within the state of Florida. Another auction from Mike& Jean Fine Antiques. Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14272db9d12-0xf1-
|
|
|
Fog Machine V-930T with Romote Timer Control, DJ, Disco club.
High Quality Thermostat. High pressure piston pump, 5,000 cubic ft. per minute fog output, 1000 watts, removable tank. Great for Halloween, or Dance floors. V-930T D.J. FOGGER 1. Carries ETL and TUV/GS safety approval. As well as conforms to E.E.C product safety standard of"EN-60335" 2. High quality thermostat. 3. High pressure piston pump. 4. Applications: Rentals for auditoriums. School Parties, Social Events, Small Clubs, Mobile D.J.s
|
|
|
Trimble 600 ATS Robotic Total Station Kit Calibrated with Machine Control
Trimble 600 ATS Robotic Total Station Calibrated Kit This Includes: Trimble 600 ATS Robotic Total Station 2.4 GHz Internal Radio 12V Hirose Power Cable Machine Control Enabled Fresh Calibration and Service By Trimble Technician New Internal Batteries Battery Adaptor Trimble Hard Case With Keys and Wrenches Trimble Power Pack 3 Trimble Batteries Trimble Multi Battery Adaptor 2- Trimble Multi Battery Chargers With 12V and 120V Plugs Multiple Trimble Hirose Cables Trimble Power Supply Remote Target Trimble Hard Case Trimble RPU Kit 2.4 GHz External Georadio with Antenna 571204312 2MM Target With Soft Case 2 More Batteries Multiple Hirose Cables Multiple Hirose- DVI Cables Battery Adaptor Trimble Hard Case Accessories Trimble Carbon Fiber Prism Rod Trimble Powerstick Rechargeable Battery With Charger Bipod Condition: This is all in excellent ... moreworking condition. There is very minor visible wear. And comes with a 14 Day Warranty. There is a 14 Day Return Policy Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground Insured within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Company and certified check, wire transfers and credit cards. We do offer a discount if paid with a check or wire transfer. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in
|
|
|
VECTRAX CNC Milling Machine with FANUC OM Control
This Machine has very low hours. New Touch Pad Controls. New Coolant Pump. Equipped with Red Cap AC Drives. Original Way Covers. This Machine is in Excellent Condition. Machine is located in central Ohio. Special delivery/shipping can be arranged. Wiring and Operating assistance available. Programming System also available. Email with any questions. X 31.5 Y 16.5 Z17.0 4.5 Z QUILL. You can see this machine run in my shop.
|
|
|
VINTAGE SINGER SEWING MACHINE NO 99-13 W/ ATTACHMENT BENTWOOD CASE KNEE CONTROL
HURRY! HURRY! STEP RIGHT-UP VINTAGE 20'S SINGER PORTABLE SEWING MACHINE W/KNEE CONTROL.W/BENTWOOD CARRY CASE AA-553960 LOOKS TO BE A MODEL 99 BUT I WON'T SAY FOR SURE CAUSE I DON'T REALLY KNOW.WHAT I DO KNOW IS THAT THIS MACHINE WAS REPAIRED IN 1996 AND IT SEEMS TO RUN VERY SMOOTH. LOTS OF SPARE BOBBINS.NEEDLES,OIL, TOOLS. SPARE FEET COMES WITH IT AS THE PIC WILL SHOW,IT'S IN THE BOX THAT'S IN THE LID ALONG WITH THE KNEE CONTROL ARM. DIDN'T ACTUALLY SEW WITH IT BUT I PLUGGED IT IN AND THE LIGHT AND THE MOTOR SEEM TO WORK VERY WELL SO I HAVE NO REASON TO THINK THAT IT WOULD NOT SEW WELL. I THINK THIS WAS A GOOD FIND IN I THINK IT WILL BE A GREAT ADDITION TO ANY COLLECTION. PLEASE WAIT UNTIL I PACK IT IF YOU WIN SO THAT I MAY GET THE WEIGHT/ AN SIZE RIGHT. TO INSURE THAT THE ITEM ARRIVES SAFELY AND IN THE COND THAT IT ... moreLEAVES HERE IN I WILL PACK IT AS BEST I CAN. THIS IS A VERY NICE ITEM AND I WOULD HATE TO SEE IT SCREWED UP IN TRANSPORT. IF YOU LIVE OUTSIDE OF THE USA PLEASE BE PREPARED FOR THE COST OF SHIPPING THEY TELL ME IT'S EXSPENSIVE. NOW WITH ALL THAT SAID FEEL FREE TO BID AND ASK ANY QUESTIONS THAT YOU MAY HAVE AND IF I CAN I WILL ANSWER THEM. GOOD LUCK
|
|
|
VINTAGE SEWING MACHINE REMOTE FOOT PEDAL SPEED CONTROL
This foot pedal came from my grandmothers house. I have never used it. Thank you for your interest! SHIPPING INSTRUCTIONS: Ships via USPS to the lower 48 states only. Shipping; packing; handling and insurance is $7.00. PAYMENT INSTRUCTIONS: Payment in full via Paypal is due in 3 days from winning bid. This item is sold as is. There are no returns or layaways- please be sure you know what you are buying as all sales are final(estate liquidation)
|
|
|
Vintage Singer Foot Control For Featherweight 221 Sewing Machine SIMANCO
Vintage Singer Featherweight 221 Sewing Machine Foot Controller- P/N 194564(Sellers tracking# G467) I have many original Singer Featherweight parts listed this week. All were removed from an operational Featherweight 221 Sewing Machine and all of the parts are in good used condition. Please see all of my Featherweight part listings. Up for auction is a genuine Singer Bakelite machine foot control for a Singer Featherweight 221 sewing machine case. Electric cord and rubber cushions are in good condition. Cleaned and tested.good working condition. Very good working condition! Please look at all of the pictures for cosmetics. The pictures are of the exact item you are buying and they are considered part of the description. Please see the pictures and ask any questions before bidding Please agree/accept the item price before bidding on the item ... moreWe combine shipping with multiple orders We buy most of our items from estate sales and antique auctions. It should be expected that vintage and antique items are not always perfect. I try to be as accurate as possible in my descriptions and I'm very particular about disclosing a ny flaws or damage. I include numerous photos with every listing. These photos can be enlarged for more careful viewing. If you are uncertain about the condition or age of any item. Please ask questions before bidding. If you are not fully satisfied with your purchase. Please contact me before leaving feedback so I have the opportunity to address your concern. I accept PayPal only. Payment must be made within 2 days of auction close. Items will be shipped within 2 business days after receipt of payment. All items are sold as is. E-mail with questions before you bid. Not after the auction ends. If I have made a listing error and that is possible, I will offer a full refund on the item. Buyer must notify seller of any listing discrepancy upon receipt. Posted with
|
|
|
Electronic Sewing Machine Foot Control Pedal, Germany
AUCTION IS FOR A SEWING MACHINE FOOT PEDAL IN EXCELLENT CONDITION. please look at the pictures. and please email me with any questions. And Thanks For Looking. Have A great day
|
|
|
HUSQVARNA VIKING SEWING MACHINE SPEED CONTROL FOOT PEDAL FR 510 #7425 - WORKS
PayPal Only SHIPPING TO USA ADDRESSES ONLY! HUSQUARNA VIKING SEWING MACHINE SPEED CONTROL FOOT PEDAL MODEL: FR 510#7425- WORKS Good Condition. Tested and Working. Conector is two pins. Like a standard electrical outlet but slanted. Please see images for details. Check out my other items! If you are interested in this and have any questions please ask early in the auction. We are available Monday through Friday 11am to 6 pm Pacific time. We are currently only shipping within the US. An 8.25% sales tax will be charged for items shipped to a California address. Free local Pick-up is available at our store in Berkeley CA. Payment should be made within three days of the auctions end. Purchased items will not be shipped until payment is completed. We are currently only accepting payment through PayPal. Shipping within the US only. Once a package ... moreis left with UPS or the USPS our responsibility ends. So please request insurance for your shipment if you are concerned about loss or damage due to shipping. We do all our packaging in house with care and consideration. We use primarily recycled packing supplies. Items sold as-is are sold as-is. Do not make assumptions about an item sold for parts or repair. You are welcome to ask questions. Thank you for taking time to look at Urban Ore's auctions on Ebay. Urban Ore has been salvaging and reselling items for over 20 years in the San Francisco Bay Area. Most problems can be resolved with communication. So before leaving anything other than positive feedback please contact us. PayPal Only SHIPPING TO USA ADDRESSES ONLY! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Singer Sewing Machine Foot Pedal,OnOff Switch,Rheostat,OLD motor control
Vintage Singer Sewing Machine Foot Pedal.On Off Switch,Rheostat,OLD motor control. 95-145 volts. 0,7 ampere. Part no.192887. Simanco, USA. Good, used condition. Some use wear& corrosion. Works fine. Has been rewired, new HD cord. Older type foot pedal. A real beauty! The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment ... moreInformation: Within U.S.A. Buyer to pay Ebay Bid Price + USPS Priority Mail or Parcel Post. Delivery Confirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
|
|
|
Sewing Machine Foot Control Pedal Model YC- 50 3-Pin Serger
Singer Serger/ Sewing Machine Foot Control Pedal Model# YC-50 This control pedal has a 3 pin plug. Please look at the pics to make sure it is the one you need. In average used condition. Works fine. Please email with questions. Kindly submit payment with 2 days of auction end. Thanks*
|
|
|
Sewing Machine Foot Control Pedal 3-Pin Model YC-50 ((SUPER FASTSHIP!))
Sewing Machine Foot Control Pedal 3-Pin Model YC-50
|
|
|
Northwestern gumball machine parts bulk candy wheel, brushes and portion control
NORTHWESTERN BULK CANDY WHEEL. BRUSHES, PORTION CONTROL ADJUSTER. Any questions please email before bidding. I will do my best to answer your questions. FEEDBACK POLICY. After you receive your shipment. If you are happy with the item and the service, please leave appropriate feedback. Once feedback has been left, you will automatically receive feedback in return. If there is a problem, please contact me before leaving negative feedback. DELIVERY CONFIRMATION. All orders. If service is available, will include a delivery confirmation when shipped. The confirmation number will be available on the Order Detail page. COMBINED SHIPPING.At any time. Should you win multiple auctions, we will combine shipping and try to keep the cost of shipping and handling as low as possible. Check out my! Be sure to add me to your!
|
|
|
20 M2 Machine Gun Browning 50 Caliber control sight manual ww2
supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasic.swf. User manual of using the control sight for M2 Machine Gun Browning.50 Caliber Machine Gun The M2 Machine Gun or Browning.50 Caliber Machine Gun. Is a designed towards the end of by. It is very similar in design to Browning's earlier. Which was chambered for the cartridge. The M2 uses the much larger and much more powerful cartridge. Which was developed alongside and takes its name from the gun itself(BMG standing for Browning Machine Gun) The M2 has been referred to as"Ma Deuce" 5] as a GI phonetic slang or"the fifty" in reference to its caliber. The design has had many specific designations; the official designation for the current infantry type is Browning Machine Gun. Cal. 50, M2, HB, Flexible. It is effective against infantry. Unarmored or lightly ... morearmored vehicles and boats, light fortifications and low-flying aircraft. The M2 has had the longest continuous service for a machine gun in the world. supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasic.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf.
|
|
|
Brother Sewing Machine FOOT CONTROL Pedal & Cord, 3 Prong Receptacle
Brother Sewing Machine FOOT CONTROL Pedal& Cord. 3 Prong Receptacle, This foot control pedal came off a Brother Sewing Machine Model VX707. There is rust and missing paint but it works great. The cord is good.The pedal can be painted to make it look better. Please look at the pictures as they are part of the description. This controller is compatible with many models. Please take time to check out my other items. Thanks. Compatible with Babylock Sewing Machine Models: B15. B17, B21, BL200, BL702, BL712, BL713, BL722, BL1500, BL1550, BL1556, BL2100, BL2150, BL2160, BL2200, BL2400, BL2600, BL6000, BL6150, BL6200& BL6300. Compatible with Bernette Sewing Machine Models: 50& 60. Compatible with Bernina Sewing Machine Models: 800. Compatible with Husqvarna Viking Machine Models: 234D. S234, 430, 431, 435, 440, 444, 535D, 600, 650ED, ... more700, 800& M530. Compatible with Riccar Sewing Machine Models: R3100. R2050, R1934& R1950. Compatible with Simplicity Sewing Machine Models: SL6220. SL8020, SL9130, SL9150, SL9240& SL8220. Compatible with So-Fro Sewing Machine Models: 4581. Foot Pedal Alternative Part Numbers Include XE5369001. XC7359-022, XC7359022, XC7359021, 14133104821, 184881051, J01780051, J02089021, J02089051, J00360051, X54143051, X57319021, X57319051, XC7359-021, X75806001, X57319-051, XC5458021, XC6659051, XC6665021, XC6666021, XC6666121& XC7359021. Compatible with Brother Machine Models: 268. 350, 360, 451, 461, 523N, 524N, 525N, 526, 526D, 546, 546D, 626D, 634D, 640D, 661, 681, 730DE, 741, 751, 760DE, 834DP, 920D, 925D, 929D, 934D, 935D, 1034D, 1681, 1781, 2340CV, 3034D, 7029, BM2600, BM3500, L25, L35, LS25, LS30, LS35, LS-590, LS1217, LS1520, LS1717, LS2000, LS2020, LS2125, LS2135, LS-2220, LS2720, LS2725, LS2820, LS2825, LS2920, LS3125, LX3125, NX200, NX400, NX600, PL1050, PS1000, PS1200, PS1250, PS1700, PS1750, PS1800, PS2200, PS3700, PX100, PX150, PX200, PX300, RS15, RS25, RS35, VX1010, VX1020, VX1100, VX1120, VX1125, VX1140, VX1200, VX1400, VX520, VX540, VX560, VX620, VX640, VX660
|
|
|
VINTAGE SEWING MACHINE FOOT CONTROL PEDAL CORD Model G Controller
VINTAGE SEWING MACHINE FOOT CONTROL PEDAL CORD Model G Controller
|
|
|
Vintage Singer Sewing Machine Control Pedal Used By David Bowie In a Dream I Had
This auction is for a vintage speed control foot pedal for Singer sewing machines. It is grey in color and seems to work as it should. It also is in nice shape cosmetically. It fits machines that have the 4-prong plug and was used numerous times by David Bowie in a dream I had. He was dressed as Aladdin Sane and was sewing Marc Bolan a flashy gold sequence codpiece with the number 5 on it and a lightning bolt that hung down the inner thigh. Needless to say. I woke up from this dream in a cold sweat and immediately listed this item on eBay. I have listed this item at the fair buy-it-now price of $3,000 but would gladly take more if someone offers anything higher, and I would also be happy to charge extra shipping and handling if requested! Please see the photos and email me with any questions. Because this is a vintage item. It will be sold ... moreas is. All sales are final. Thank you for looking and Happy Holidays! s Posted with eBay Mobile
|
|
|
Mercury Electric 229D Speed Control Sewing machine foot pedal 704 foot 705 knee
Welcome to my Store This is a nice presser foot It was on a singer 4 plug Questions are welcome
|
|
|
Mercury Electric Speed Control Foot Pedal 229D Sewing Machine Jeweler Flex Shaft
This auction is for a vintage Mercury Electric speed control foot pedal in excellent condition- very clean. It has been tested and works. Please see photos and email me with any questions. Because this is a vintage item. It will be sold as is. All sales are final. Thank you for looking and Happy Holidays! Posted with
|
|
|
Singer Sewing Machine Foot Motor Control Part 196131 Pedal
Singer sewing machine motor foot control pedal. Part number 196131. The controller was removed in working condition. Appears to be in good condition with signs of normal wear from use. On Nov-04-13 at 12:12:10 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Victrola crank windup phonograph talking machine brake stop & speed control part
Up for auction is ONE brake AND SPEED CONTROL PART for antique Victrola phonographs. THE BRAKE PART: Measures: 2 3/4 TALL x 3 3/8" wide. Please see pictures. This brake may work on numerous tabletop. Console and upright Victrola' s. THIS IS DIRTY FROM BEING STORED FOR MANY YEARS- NEEDS TO BE RESTORED. CLEANED& POLISHED. NOT SURE WHICH MACHINE I AM NO EXPERT- YOU THE EXPERTS KNOW- SO PLEASE LOOK AT THE PICTURES! Needs to be RESTORED- cleaned& polished. Sold as found; look closely at pictures; all-and only- what you see is what you get! Please ask all the questions you want BEFORE you purchase! We'll be happy to answer you. Usually within a few of hours. GOOD LUCK BIDDING& YES. WE COMBINE SHIPPING PLEASE WATCH FOR MORE ITEMS( TALKING MACHINES. RECORDS, CASES, AIRPLANES& BOOKS) WE WILL BE LISTING AS TIME PERMITS. ... moreTHANK YOU FOR CHECKING OUT OUR AUCTIONS& GOD BLESS!
|
|
|
early Victor Talking Machine phonograph speed control knob w/plate & screws
Original Victor early style speed adjustment. Complete with plate and original screws.
|
|
|
GROUND FOGGER MACHINE 400 WATT WITH TIMER CONTROL AND REMOTE AND FOG JUICE
GROUND FOGGER MACHINE 400 WATT WITH TIMER CONTROL AND REMOTE AND FOG JUICE
|
|
|
LASER ALIGHNMENT 386 MACHINE CONTROL LASER RECEIVER ,GRADER,BACKHOE,APACHE,360
The Trimble Grade Control Receiver Laser Alignment 360 degree machine control receiver is a versatile 360 degree laser-based control system that can significantly improve the productivity and accuracy of grading equipment by as much as 50% over conventional methods. Laser Alignment receiver is the most durable. Simple and easy-to use receiver available combining proven photocell technology. It provides an immediate return on investment by enabling any operator with minimal training to get to grade fast, with outstanding accuracy. With Laser Alignment receiver, an independent grade-checker is not required, cutting costs by eliminating communication errors, re-work, and idle machine time. THIS RECEIVER HAS BEEN COMPLETELY SERVICED FOR THIS SALE AND IS IN EXCELLENT CONDITION. THIS SALE INCLUDES: Laser Alignment 360 receiver. Coiled cable. Carrying ... morecase. BY PLACING A BID YOU AGREE TO THE TERMS OF SALE TERMS OF SALE: Winning an auction is Agreeing to purchase the item. PLEASE READ THE DESCRIPTION. LOOK AT PICTURES, RESEARCH THE ITEM THAT YOU ARE BIDDING ON, AND ASK ALL QUESTIONS PRIOR TO BIDDING. If you change your mind(for any reason) after bidding and winning, there will be a 15% restocking fee in order to a non paying bidder alerts from being filed. For quickest processing time please use PayPal(not PayPal e-check as it takes up to 7 days to clear) All checks take up to 10 days to clear OUR bank, items will not be shipped until the payment clears OUR bank. By bidding, you are agreeing to the bidding price, shipping price, applicable taxes and all of the terms on this item page; PLEASE ONLY BID IF YOU AGREE TO OUR TERMS AND CONDITIONS. All items are packed to the requirements of the carrier. If an item is damaged or lost in shipment. Please contact the shipping carrier directly to file a claim. All items are insured up to the purchase price of the item. We do not issue any type of refunds on lost or items damaged in shipping. INTERNATIONAL BIDDERS: PLEASE NOTE that you are responsible for all import tariffs. Du
|
|
|
TOPCON LS-B4 MACHINE CONTROL LASER RECEIVER ,GRADER,BACKHOE,TRIMBLE,APACHE,360
The easy to use Topcon LS-B4 is The easy to use Topcon LS-B4 is designed to boost machine production so your business always maintains a leading edge over the competition. The LS-B4 can't be beat for accurate. One-person control. Using a laser as it's reference, the LS-B4 visually provides the machine operator the grade information needed for continuous, accurate work. And fewer passes are required to reach final grade so operators benefit from the LS-B4's timesaving simplicity. The receiver is portable and easily moved from machine to machine for greater operator and machine efficiency. THIS RECEIVER HAS BEEN SERVICED AND TESTED FOR THIS SALE AND IS IT EXCELLENT CONDITION THIS SALE INCLUDES: Topcon LS-B4 receiver Clamp mount Alkaline batteries Carrying case BY PLACING A BID YOU AGREE TO THE TERMS OF SALE TERMS OF SALE: Winning ... morean auction is Agreeing to purchase the item. PLEASE READ THE DESCRIPTION. LOOK AT PICTURES, RESEARCH THE ITEM THAT YOU ARE BIDDING ON, AND ASK ALL QUESTIONS PRIOR TO BIDDING. If you change your mind(for any reason) after bidding and winning, there will be a 15% restocking fee in order to a non paying bidder alerts from being filed. For quickest processing time please use PayPal(not PayPal e-check as it takes up to 7 days to clear) All checks take up to 10 days to clear OUR bank, items will not be shipped until the payment clears OUR bank. By bidding, you are agreeing to the bidding price, shipping price, applicable taxes and all of the terms on this item page; PLEASE ONLY BID IF YOU AGREE TO OUR TERMS AND CONDITIONS. All items are packed to the requirements of the carrier. If an item is damaged or lost in shipment. Please contact the shipping carrier directly to file a claim. All items are insured up to the purchase price of the item. We do not issue any type of refunds on lost or items damaged in shipping. INTERNATIONAL BIDDERS: PLEASE NOTE that you are responsible for all import tariffs. Duties and you country’s taxes(if applicable) IF YOU HAVE ANY QUESTIONS OR HAVE A PROBLEM
|
|
|
LEICA RUGBY 300SG SINGLE SLOPE LASER LEVEL & CST DS-180 MACHINE CONTROL TOPCON
LEICA RUGBY 300SG SINGLE SLOPE LASER LEVEL& CST DS-180 MACHINE CONTROL RECEIVER Up for sale is a used but in great working condition Leica Rugby 300SG Single Slope Laser Level with a CST Berger DS-180 Machine control laser receiver. These are pictures of the actual item up for sale. It has been tested and both items work perfectly. The laser level uses regular alkaline batteries and the laser receiver has rechargeable batteries with charger. Free shipping to anywhere in the lower 48 states only. Alaska and Hawaii please email me for shipping cost. I will only ship to a Paypal confirmed address. Please review me feedback and bid with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below ... moreto view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup available. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Add me to your Favorite Sellers View My Other Items For Sale Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund.
|
|
|
Leica Javelin Machine Control Dual Slope Laser - End of Year BLOW OUT SALE!
SquareTrade © AP6.0 Leica Javelin Dual Slope Machine Control Laser Transmitter in good working order. Comes professionally calibrated in the case with charger. 13223030 Please view our other items and store inventory for great values in Interior and Exterior Laser Equipment. Surveying and Machine Control Items from Spectra, Topcon, AGL, Laser Alignment, Leica and others. Buyer agrees to contact seller within 48 hours Payment must be received within 10 DAYS Shipping quoted is for US 48 states only Confirmed Address PayPal- Money Orders- Checks Accepted and items ship upon clearance
|
|
|
Trimble MS980 Receiver for Trimble/Cat Machine Control GPS With GCS900 Cable
Trimble MS980 GPS Receiver This Includes: 1- Trimble MS980 Receiver 1- Coil Cable 1- Mast Mount 30 Day Warranty Includes Quick Connect Ratchet and Carrying Handle This is for Trimble GCS900 and Cat Machine Control. Condition: This is in good used tested condition. It has a few scuffs. This includes a 30 day warranty. Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Cashier's checks and wire transfers. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is ... moreshipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business!
|
|
|
Fryer MB-8 CNC Milling Machine Anilam 3300 MK Control Speed-rite torque-rite A+
FRYER MB-8 CNC MILLING MACHINE 3 AXIS 3300 ANILAM MK CONTROL IT HAS THE OPTIONAL STEEL WAY COVERS ON THE FRONT ON THE Y AXIS THIS IS ONE NICE. PIECE OF EQUIPMENT. I'VE BEEN AROUND THIS MACHINE PRACTICALLY ITS' WHOLE LIFE. IT WAS SOLD TO AN OUTFIT HERE IN THE CLEVELAND AREA THAT MADE PRIMARILY PLASTIC PARTS. THEY WERE BABIED! I ACTUALLY HAD ANOTHER MACHINE SIMILAR TO THIS ONE WITH THE SAME CONTROL THAT CAME FROM THE SAME PLACE. I ALSO HAVE ANOTHER MILL SIMILAR IN SIZE TO THIS WITH THE SAME CONTROL THAT CAME FROM A DIFFERENT SHOP(ALL ARE AVAILABLE) ANYWAYS BACK TO THIS ONE-YOU CAN SEE IN THE VIDEO THAT THE BALLSCREWS AND MOTORS SOUND AWSOME! I ACTUALLY INSTALLED THE SPEED-RITE AC VARIABLE DRIVE(5HP) ON THIS MACHINE AS WELL AS THE TORQUE-RITE POWER DRAW BAR. WE ARE SELLING IT WITH THE 6" VISE SHOWN IN THE PICS AND VIDEO. LINK TO ... moreVIDEO VIDEO PROMO OF LEE'S MACHINERY http:www.youtube.com/watch?v=8OUwb_edcqA WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 22+ YEARS, MEL 7 YEARS AND DENVER(MY SON) WHO BEEN HERE FOR ALMOST 3 YEARS NOW. WE HAVE OVER 30 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. THIS MACHINE WILL WEIGH4500LBS CRATED AND THE SIZE IS 72"LENGTH X 80"WIDTH X 100" TALL. WE WILL CHARGE $100 FOR A CUSTOM MADE SKID OR $300 FOR A CUSTOM MADE CRATE. WE USE ALL NEW LUMBER AND WE USE 2X4'S FOR THE FRAME. MOST VAN LINES REQUIRE A CRATE FOR TRUCKING. WE JUST SHIPPED A MACHINE OF SIMILAR SIZE TO NEW ZEALAND AND HE JUST LEFT FEEDBACK SAYING IT GOT THERE SAFELY AND WITHOUT PROBLEMS AT THE PORTS. WE MIGHT HAVE TO TAKE TO Z AXIS MOTOR OFF TO GET IT INSIDE OF A TRAILER. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIPCODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRU
|
|
|
Trimble CB420 Dual Control Box for GCS Machine Control System - 13272043
SquareTrade © AP6.0 Trimble CB420 Dual Control Panel in nice condition and good working order. No cord or other accessories just the panel. Has the RAM Ball Mount on the back and 6-pin/ 6-socket connections. 13272043 Information from the manufacturer: Trimble CB420 Dual Control Box Cab-mounted. Dual control user interface General Description The Trimble CB420 is a rugged. CAN-based operator interface for conventional machine control systems that provides all the information today’s operators need to consistently grade at higher accuracy and faster speeds. This device is designed to be mounted in the cab while in operation, and be quickly removed for storage when not in use. Simple operation with toggle and push-button switches gets you to grade fast and accurately. Dual. Ultra-bright LED grade displays relay the blade position to grade ... morein day or night lighting condition to maximize productivity. The grade display automatically compensates for varying light conditions to ensure comfortable viewing. A graphical. High-contrast backlit LCD provides numeric elevation and system configuration information with easy-to-read graphics. The backlight LCD is temperature-compensated to maintain sharp contrast regardless of the weather. A built-in beeper provides audible tones for grade errors. Switch activation, and system health. Standard Features Dual elevation control provides greater accuracy. As both the lift and tilt of the blade are independently automatically controlled. Backlit graphic display shows status and connectivity of input sensors. Reference elevation and operation mode. Easy operation combines ideally positioned toggle and easy-to-locate push-button switches with mirror left/right functionality and exceptional tactile feedback. Software upgradeable through RS232 port supports future enhancements with quick laptop operating downloads. Portrait layout provides unobtrusive operator view. Controller Area Network supports future sensor inputs without hardware changes. International shipments M
|
|
|
Leica GPS GNSS GLONASS RTK Power Antenna MNA950 GG Base & Rover Machine Control
INTERNATIONAL BUYERS AND BIDDERS WITH LESS THAN 5 FEEDBACKS CONTACT ME PRIOR TO BUYING OR I WILL CANCEL THE TRANSACTION! The Tripods. Rover rod and bi pod will only be available to customers in the USA. They are way to expensive to ship internationally. Make sure you read the entire description. I am selling a Leica MNA950GG Power Antenna GNSS RTK set. This set up is in Good condition shop tested and ready to go to work. This is a really versitile system. The Power Antenna is the world’s first system that uses the same components for on- and off-machine applications. This set up is GLONASS ENABLED! That means it has full time glonass with no expiration. The radios allow for about 2-3 mile range. This is a Complete RTK set. These unit's have some scrapes from use but this obviously does not hinder performance. The most wear is on the screen ... moreof the data collector. Here is a link to Leica site for more info and configuations options. This sale includes: ROVER- Leica MNA950 GG Full time GLONASS Base- Leica MNA950 GG Full time GLONASS Data Collector-Leica MCP950c with color screen. Carlson Site Foreman(GPS enabled) GPS900, GPS1200 software, Radios-2) Intuicom 1200 Data Link-4) Batteries-2) Leica single chargers-Leica GHT56-Leica Tribrach and Adapter-Leica Height Tape-Radio Antenna Y Cable-External battery(Holds charge but may need recell) Only for USA Customers- Tripod-Rover Rod-Crain Bi-pod This set up retails for about $30.000 here is your chance to save some money! INSURANCE IS MANDATORY NO BITCHIN ABOUT IT! Payment: I WILL NOT ACCEPT PAYPAL FOR THE FULL AMOUNT. I WILL SEND YOU AN INVOICE FOR A $500 DEPOSIT. LOCAL PICK UP IS THE PREFERED METHOD. THAT WAY YOU CAN SEE IT WORK IN PERSON I CAN HAVE A TECH DEMO THE EQUIPMENT FOR YOU. YOU CAN PICK UP AND PAY CASH IN PERSON OR VIA BANK CERTIFIED CASHIERS CHECK. I WILL ONLY ACCEPT BANK WIRE TRANSFERS OR PICK UP AND PAY CASH FROM INTERNATIONAL BUYER NO EXCEPTIONS! Shipping: I only ship to CONFIRMED addresses NO P.O. BOXES NO EXCEPTIO
|
|
|
Trimble SV170 Control Box For GCS900 GPS Machine Control PN 36589-22 Ver. 6.11
Trimble SV170 GPS Control Box Ver. 6.11 for GCS900 Machine Control Condition: This is in good working tested condition with some minor scuffs from use. It does not have automatics enabled. We do have a similar model with automatics if needed. Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And ... morehas full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 8380.
|
|
|
Trimble SNR900 Radio For Trimble/Cat GPS GCS900 and Sitevision Machine Control
Trimble SNR900 900MHz Radio This Includes: Trimble SNR900 900MHz Radio Mounting Bracket This Radio Works With Trimble/Cat Machine Control It Works With GCS900( MS980. MS990, CB430) It Also Works With Sitevision( SV170. MS860, Antenna Planes) It Works With 12 And 24 Volt Systems Condition: This radio is in good tested used condition. Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. ... moreLiens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 9203.
|
|
|
Indigo 830e LS83E Surgical Laser Machine nice clean unit with foot control
Indigo 830e LS83E Surgical Laser Machine nice clean unit with foot control and SONY Power Adapter. Machine power on but i lost the key to operate with that key So i am selling that machine witout key. You will get the exact Actual item or items as Pictured All items are Factory Sealed Pack Never Opened. Maybe NoN-Sterial Due to Expiration Date. FDA Regulation: THE SALE OF THIS ITEM MAY BE SUBJECT TO REGULATION BY THE U.S. FOOD AND DRUG ADMINISTRATION AND STATE AND LOCAL REGULATORY AGENCIES. IF SO. DO NOT BID ON THIS ITEM UNLESS YOU ARE AN AUTHORIZED PURCHASER. IF THE ITEM IS SUBJECT TO FDA REGULATION, I WILL VERIFY YOUR STATUS AS AN AUTHORIZED PURCHASER OF THIS ITEM BEFORE SHIPPING OF THE ITEM. DISCLAIMER: Regardless of the origin of the equipment. Documentation provided or identification appearing upon the equipment, the equipment described ... moreand offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. THIS PARAGRAPH IS REQUIRED BY eBay" The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. To comply with eBay's listing policy for the Healthcare category. I am providing my complete business name, address, type of business and FDA Regulatory Statement: USE Surgical Instruments Inc Exporters and Re-Seller of Disposables and Medical Equipment PO BOX 3558 Jersey City. NJ-07302. Phone: 201-432-9700 Fax: 201-432-9701 Cell: 201-981-8505 Location Z
|
|
|
VINTAGE IBM 3505 CARD READER MACHINE SWITCHES CONTROL PANEL COMPUTER MAINFRAME
Vintage IBM 3505 Card Reader Machine Control Panel. Excellent 100% original condition. 9.25" x 5" heavy metal and plastic, switches work. Thanks.
|
|
|
Trimble VM410 Valve Module For Machine Control GPS
Trimble VM410 Valve Module This works with Trimble and Cat GCS900 Install Kits Condition: Excellent tested working condition. Please contact us at 360-798-7268 with any questions. Shipping: We ship Fedex ground within 1 day on most items. Some smaller items we ship USPS Priority Mail. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes ... moreall liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 73.20.
|
|
|
Taylor control board # X51169 for FCB machine model 355 very lightly used
Taylor control board# X51169 for FCB machine model 355 very lightly used and in like new condition guaranteed to work. Shipping is 8.99 including insurance. Any problems just email me and I will take care of it. Thanks.Chip
|
|
|
CATERPILLAR TC900C GPS Machine Control Radio - Same as Trimble SNR900
SquareTrade © AP6.0 Caterpillar TC900C Machine Control GPS Radio. Part number 54323-10 in excellent condition and good working order. Same as the Trimble SNR900. Used#13272046 Please view our other items and store inventory for great values in Laser Equipment. Surveying and Machine Control Items from Trimble, Spectra Physics, Spectra Precision, Nikon, Sokkia, Topcon, AGL, Laser Alignment, Leica and others. QUESTIONS? Call BOB at 574-551-0026 Buyer agrees to contact seller within 48 hours Payment must be received within 10 DAYS Shipping quoted is for US 48 states only- AK. PR, HI will be 5.00 more Confirmed Address PayPal- Money Orders- Checks Accepted and items ship upon clearance
|
|
|
Topcon LS-B2 and RD-2 Machine Control Laser Reciever and Hard Case
This is a Topcon LS-B2 and RD-2 machine control laser receiver. They are in original hard case. Both are in good condition. Comes with charger. They do work. What you see is what you get in the case. Was previously used with a D4H dozer.
|
|
|
Topcon RL-H2Sa Dual Slope Rotary Laser w/ LS-70B Receiver for Machine Control
Topcon RL-H2Sa Dual Slope Laser Kit This Includes: Topcon RL-H2Sa Rotary Laser Topcon LS-70B Receiver CST/Berger Tripod Topcon BT-51Q Rechargeable Battery Battery Charger Instruction Manual Topcon Carrying Case Specifications: Accuracy: +/ 10" arc seconds. 1/16" 100' Range: 2300' Rotation Speed: 300. 600, 900 RPM Self Leveling Range: +/ 5 Degrees Slope Range: 8% to +8% Operating Temperature: 4 degrees F to 122 degrees F Condition: In tested working Condition. Shipping: We ship FedEx ground within 2 days on most items. Please specify if you nee expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be ... morecharged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your b usiness! 8120.
|
|
|
Topcon LS-B2 Machine Control Laser Reciever Sensor
In working condition Posted with
|
|
|
BRIDGEPORT SERIES 1 CNC MACHINE SOLD AS IS FOR PARTS WITH BOSS CONTROL
BRIDGEPORT SERIES 1 CNC MACHINE SOLD AS IS FOR PARTS WITH BOSS CONTROL Prev Stop Play Next You are bidding on a Bridgeport CNC Machine. Model: Series 1. This machine is being SOLD AS IS and would be great for parts or to fix and make a reliable work piece. 34" X 12-1/2" Work Table 2 HP Motor 3 Phase 208 Volts We will b e happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. SquareTrade © AP6.0
|
|
|
RX System Honing Machine Sharpening System w/ Foot Control Model V Used
RX System Honing Machine Sharpening System w/ Foot Control Model V Used Description: PLEASE READ BEFORE PURCHASING ASK ALL QUESTIONS THROUGH EBAY MESSAGES BEFORE PURCHASING TO AVOID ANY CONFUSION. EXACTLY what is pictured is included. If it is not pictured. Assume it is not included. IF YOU RECEIVE YOUR ITEM AND IT IS NOT TO YOUR 100 PERCENT SATISFACTION. CONTACT US BEFORE LEAVING FEEDBACK! We strive to make sure every transaction a positive one! CONDITION OF ITEM IN THIS LISTING IS:2 Unit is in good working condition. The item condition numbers and their definitions are below: 1. NEW 2. I guarantee this item to fully work or I will send you a full refund within seven days of you receiving the item. 3. I guarantee this item to power on. I have not tested the functionality of this item. If it does not power up. I will send you a full refund. ... moreBeyond that, no refunds will be offered. 4. Unable to test due to lack of knowledge or inappropriate power source. This item is sold AS-IS with no guarantees or refunds offered. 5. Failed to power up or testing and is being sold for parts. This item is sold AS-IS with no guarantees or refunds offered"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We Sell Your Anything 4467 E 50th St Suite 600 Des Moines. IA 50317
|
|
|
Trimble CAT CB410 GCS Machine Control Box Laser for Excavator Good Condition
Trimble/ Cat CB410 Machine Control GCS Excavator This CB410 has been tested and is in great working condition. The Control Box was pulled off an excavator grade control system which was fully functional in a working environment. Still has mounting bracket on it. Includes: 1) CB410(1) Mounting Bracket SITECH Office: 855-417-0290 Brad: 412.709.7374 If you have any questions about this listing feel free to call us at 1-855-417-0290. SITECH Allegheny is an authorized dealer of Trimble® and Caterpillar® Connected Site® solutions—GPS construction site positioning systems. Construction asset management services, software and powerful wireless and Internet-based site communications infrastructure, and advanced machine control systems. All equipment for sale by SITECH Allegheny has been inspected by our service personnel to ensure it ... morematches the description and is value-priced to account for any previous wear and tear. If used. We accept only used equipment that are in good condition and will operate effectively for our customers, unless deemed as a for parts only item. Terms of Sale Sales Tax: SITECH Allegheny is required by law to charge sales tax to residents and buyers from the following states. Unless an exemption is provided: Georgia(4% Kentucky(6% Maryland(6% New Jersey(7% New York(4% Ohio(5.5% Pennsylvania(6% Vermont(6% Virginia(5% and West Virginia(6% An additional county tax may apply to residents of Georgia, New York, Ohio, Pennsylvania, and Virginia, if applicable. If equipment or parts other than New Products(Used Products" Are being quoted herein, such Used Products are sold on an AS-IS basis, without any warranty whatsoever, except as may be expressly stated on the face hereof. Buyers are responsible for all shipping arrangements. Item must be paid in full prior to shipping. Item is for sale locally. SITECH Allegheny reserves the right to end this auction at any time. Payment arrangements must be setup within 3 business days at auction end- PayPal is preferred Contac
|
|
|
Fleco CDG-19B Single CD and Cassette Karaoke Machine Mono w/ Pitch Control
Manufacture: Fleco Model: CDG-19B Description: Fleco CDG-19B Single CD and Cassette Karaoke Machine Mono w/ Pitch Control Missing Cassette Cover One foot on bottom is loose. Condition: used tested good Details: rob717/av/32 Extra Info: 32lbs Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive to do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products unless it is stated as such in the auction(DOA. ... moreFor repair or parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases, all information that we have available to us is included in the text of the auction. Any other questions email us or call! Thanks! Payment and Shipping We accept credit cards over the phone or through eB
|
|
|
Royal Vendors vending machine control board Merlin 2000
This board was repaired by" Vendors repair Service" is working and in good conditions. Posted with
|
|
|
Cabinet Mount 18" LCD Touchscreen Slot Machine/Kiosk/Control Panel $0 SHIP'N!
These were pulled from a de-comissioned casino slot machine. They were tested with a 12v DC 3.3 Amp LCD power supply and Elo touch screen serial port drivers. We set the resolution to 1280x1024 and tested the screen. The screens and touch area are in very good shape. There is no gouges. Cracks, or dead areas on either the sreens or touch area. These were in a smokey environment and have residual traces of cigarette use: smoker smell and yellowing of chasis. These have ten mounting brackets but one is bent(can be easily straightened out. Includes 9 pin M-F VGA cable. Does not include power supply, software, or documentation. 18" Cabinet Ready LCD Touch Screen NOP-181. NOP-181DNES-DC. 1x M-F VGA cable. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14325fd4750-0xe6-
|
|
|
Lot of (4) NC-8000 Control Cards for Nissei Injection Molding Machine
Equipment Details Summary Specifications Category: Injection Molding Machine Sub-Category: Parts Description: Lot of(4) Control Cards for Nissei Injection Molding Machine Manufacturer: Nissei, Model: FS360S100ASE Year: 1982, Features: Lot of(4) NC-8000 Control Cards from a 400 Ton Nissei Injection Molding Machine(S/N: S36D053) POS-02 | TP-1B107 | no. 63981, A0P-50D | TP-1C204 | no. AD3561, D02-01 | TP-1A104 | no. 47068, CPU-02 | TP-1C101 | no. 280082, Our Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales ... moreand is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are included
|
|
|
SUNSTRAND MACHINE TOOL VELOCITY CONTROL RAMP GENERATOR CIRCUIT BOARD MODEL G5
SUNSTRAND MACHINE TOOL VELOCITY CONTROL RAMP GENERATOR CIRCUIT BOARD MODEL G5 You are Purchasing a Sundstrand Machine Tool Velocity Control Ramp Generator. Model: G5 This Ramp Generator is in Great Condition and Fully Guaranteed. REV. G Shipping and handling is $7.90 within the Continenta l USA. ~ International bidders are always welcome ~- We always combine shipping to give you the lowest cost- Contact us with any questions at 1-800-826-3433(9-5pm Est) Please visit our other listings on eBay!
|
|
|
METEOR M20 200 COIL WINDING MACHINE W/ MCS4 CONTROL (#01)
METEOR M20 200 COIL WINDING MACHINE W/ MCS4 CONTROL(01) Description: Thank you for your interest! We are auctioning off this METEOR M20 200 COIL WINDING MACHINE W/ MCS4 CONTROL(01) Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Cosmetic wear and banged up. I believe this is a coil winder. Has a Mitsuni 54x max drive. Hoffman Enclosure. The stand is broken for the monitor. A couple of keyboard keys are missing. Side door bent. Square D breaker box. 240 volt. Approx 575lbs. High cost unit. USA CUSTOMERS- NO MEANS TO TEST. Sold as is for parts or repair! INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. SOLD AS IS WITH NO GUARANTEES. ITEM IS TOO LARGE FOR COMMON CARRIERS. SO MUST ... moreBE SHIPPED VIA FREIGHT. $25 CHARGE FOR PALLETIZING/PREP FOR SHIPMENT. We can arrange shipping or you can arrange your own. For us to check rates, we need the following info: 1. complete address& phone# 2. commercial or residential location, 3. do you have a dock or forklift for delivery or need a tailgate delivery 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's
|
|
|
Cohu 4995-2000 Camera Control Unit Machine Vision 12V Control Unit
Up for sale is a Cohu 4995-2000 Camera Control Unit Machine Vision 12V Control Unit. Please do not hesitate to contact me if you have any questions. Tel(781) 285-6757 or by clicking"Ask a Question" at the bottom of this page. Powered by
|
|
|
Acme 500 VA Machine Tool Control Transformer TA-1-81215
Acme 500 VA Machine Tool Control Transformer TA-1-81215 THIS TRANSFORMER IS USED. THIS TRANSFORMER WAS TAKEN OUT OF A MACHINE AND HAS SOME COSMETIC WEAR. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# TA-1-81215 APPROX. PRODUCT DIMENSIONS: WIDTH: 5" LENGTH: 7.5" HEIGHT: 4.5" SHIPPING WEIGHT 20 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND U
|
|
|
SHARP/FIRST VARI-SPEED MILLING MACHINE WITH ANILAM CRUSADER M 3-AXIS CNC CONTROL
FIRST VARI-SPEED MILLING MACHINE WITH ANILAM CRUSADER M 3-AXIS CNC CONTROL. 9X42" TABLE. R8 TAPER SPINDLE. 2HP MOTOR. 220V. CHROME WAYS WITH ADVANCED CANNED CYCLES. MACHINE IS IN GREAT WORKING CONDITION. SINGLE OWNER. BALL SCREWS ON ALL 3-AXIS WITH MINIMAL WEAR. CHROME WAYS GOOD CONDITION. READY TO PLUG IN AND RUN! SELLING FOR ONLY $4.500.00! PLEASE CONTACT TODD AT WEBB MACHINERY FOR ADDITIONAL DETAILS. 951-277-8885.
|
|
|
Trimble CAT GCS900 MS992 CB 460 3D AUTOMATICS MACHINE CONTROL KIT GLONASS GNSS
Trimble CAT GCS900 MS992 CB 460 3D AUTOMATICS MACHINE CONTROL KIT GLONASS GNSS WESELLEM recycles quality high end products which is good for your pocket and our environment. SHIPS WORLDWIDE NEW UNITS ARE VERY EXPENSIVE Condition: Tested and guaranteed fully operational. INCLUDES CB460 with 3D Automatics. GCS900 V 12.20. 2X MS 992's RTK& GLONASS UNLOCKED(Newest Firmwares) GPS CABLES. CASE. CALL US 281-829-8 6 96 PayPal, Visa, Master Card, Discover INTERNATIONAL BIDDERS: PLEASE NOTE THAT WE WILL ONLY SHIP VIA FEDEX OR USPS EXPRESS MAIL OR MAIL SERVICE THAT PROVIDES TRACKING. INTERNATIONAL BUYERS COULD BE SUBJECTED TO ADDITIONAL FEES& TARIFFS BY CUSTOMS WHICH THE BUYER IS FULLY RESPONSIBLE FOR. WESELLEM is in no way affiliated with any of the company or brand that may be presented in the listing. The brand and copyrights belong to ... morethe respective company& owners. Payment Methods:WE ACCEPT CREDIT CARDS DIRECTLY ALSO + PAYPAL + BANK TRANSFER WE ARE NOT AUTHORIZED TRIMBLE DEALERS NOR ARE WE AFFILIATED WITH TRIMBLE:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-143365a8823-0xe5-
|
|
|
Trimble MS992 MS 992 Machine Control Receiver Glonass GNSS Smart Antenna
Trimble MS992 MS 992 Machine Control Receiver Glonass GNSS Smart Antenna WESELLEM recycles quality high end products which is good for your pocket and our environment. SHIPS WORLDWIDE 3-5 DAYS DELIVERY NEW UNITS ARE VERY EXPENSIVE Condition: Tested and guaranteed fully operational. This Sale includes: Excellent Trimble MS 992 Machine Control Receiver. RTK and GLONASS. Trimble GNSS MS992 SMART ANTENNA- The MS992 contains an integrated GPS+GNSS receiver. Antenna, and isolation system all in a single, durable housing. It uses the advanced Trimble RTK engine for faster initialization times when satellite lock is lost and enhanced performance near obstructions. CALL US 281-829-8 6 96 PayPal, Visa, Master Card, Discover INTERNATIONAL BIDDERS: PLEASE NOTE THAT WE WILL ONLY SHIP VIA FEDEX OR USPS EXPRESS MAIL OR MAIL SERVICE THAT PROVIDES TRACKING. ... moreINTERNATIONAL BUYERS COULD BE SUBJECTED TO ADDITIONAL FEES& TARIFFS BY CUSTOMS WHICH THE BUYER IS FULLY RESPONSIBLE FOR. WESELLEM is in no way affiliated with any of the company or brand that may be presented in the listing. The brand and copyrights belong to the respective company& owners. Payment Methods:WE ACCEPT CREDIT CARDS DIRECTLY ALSO + PAYPAL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14336f202d9-0xf0-
|
|
|
Bridgeport Southbend Lathe Milling Machine Overload Control Lever Spring #4
Condition: In good used condition. No springs Please ask any and all questions prior to auction close as this item is sold a s is with no warranty or returns. Feedback. WE WANT POSITIVE FEEDBACK- Feedback left after feedback received! Did you know? On eBay. A NEUTRAL feedback rating is treated exactly the same as a NEGATIVE feedback? Please do not leave a negative or neutral feedback without contact from us to help resolve any issue! We are committed to satisfaction of your purchase. If you are not satisfied with your purchase in anyway please give us an opportunity to make it right before leaving feedback. You may ask a question through ebay's contact a seller section. CUSTOMER SERVI all out of country bidders please ask about the cost of shipping to your country
|
|
|
HD COMMERCIAL "HOBART" CONVEYOR FAST PAK MEAT WRAPPING MACHINE W/DIGITAL CONTROL
You are bidding on A USED CONDITION HD COMMERCIAL"HOBART" CONVEYOR FAST PAK MEAT WRAPPING MACHINE W/DIGITAL CONTROL MAKE: HOBART Model# NSW S/N: 31-1033-71B 120/208-24OV. 2133 WATT, 10Amps, 1 PH, 60Hz, 3 WIRE NSF. UL AND CSA CERTIFIED MADE IN USA 51"H x 32"W x 62"D(OVERALL) NOTE: ONE S.S. SIDE PANEL IS MISSING* This is a very expensive unit that we are happy to sell for quite less in light of the of one missing panel. Bid with confidence this item will not last long. This item may or may not need minor parts for complete operation. We are unable to test this item due to inadequate electrical needs. THIS UNIT WAS IN OPERATION WHEN REMOVED FROM A CLOSING BUSINESS. THE PHYSICAL CONDITION. AND ALL ACCESSORIES INCLUDED WITH THIS ITEM, IS AS REPRESENTED IN THESE PHOTOS, SELLING AS SHOWN. ID# 15-0196M LOC. BB2B Welcome to“Bargains“R” ... moreOurs Food Equipment” where you can get Restaurant and Food Service equipment at a bargain! Our 35.000 sq. ft. warehouse, with over 4000 items, is located in Battle Creek, Michigan. We are one of the largest used restaurant equipment re-seller in South West Michigan specializing in Restaurant; Bakery; Pizza; Ice Cream Shop; Grocery Store; Deli; and Supermarket equipment. We work closely with Repossessing Companies and Banks, so we are able to get these equipment at low prices which we are able to pass on the saving to you. Why buy new? Save BIG $$$$ here! Thank you for visiting our store, and may you all have The Happy Life. We ship to your PAYPAL shipping address. UNLESS you contact us and tell us otherwise. Please call(269)963-3333 for more information and faster service. If no answer, you may call(616)638-2465. Also click this link http:stores.ebay.com/BARGAINS-R-OURS to save big $$$$$ for restaurant equipment. Indoor, outdoor lightings, household goods, tools and much more! For our store inventory. Please visit our“pro-store” www.Bargainsfoodequipment.com and save money here! Thank you very much for visiting our store. Bargains-R-Ours offers the fo
|
|
|
IL-7015 ATM KLusendorf 9 lables from machine 011 all with control Nrs.
IL-7015 ATM Klusendorf 9 lables machine 011 all with control Nrs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1433a276672-0xf5-
|
|
|
IL-7014 ATM KLusendorf 12 lables from machine 008 all with control Nrs.
IL-7014 ATM Klusendorf 12 lables machine 008 all w control Nrs.
|
|
|
IL-7013 ATM KLusenndorf 13 lables machine 008 all with control Nrs.
IL-7013 ATM Klusendorf 13 lables machine 008 all w control Nrs.
|
|
 |