|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
$150.00 Shipping Condition: New – Open box Location: China ※All faulty due to improper installation or improper use will NOT be covered by the warranty.
Buy It Now
$200.00 Shipping Condition: Used Location: China HP/ Agilent 4284A 20Hz-1MHz Precision LCR Meter. Option 001/006 The 4284A/001/006 is in excellent physical and working condition. Includes NIST Calibration ... moreCertificate. The unit is offered with a 14 day right of return and a 30 Day Warranty. Please contact us with any questions! The Agilent/ HP 4284A Precision LCR Meter is a cost effective solution for material and component measurement. The Agilent/ HP 4284A Meter has a wide frequency range and superior test signal performance. Which allows this meter to test components to the most commonly used test standards, such as IEC/MIL standards, and under conditions that simulate the intended application. Whether in research and development, production, quality assurance, or incoming inspection, the Agilent/ HP 4284A Meter is designed to meet your most rigorous LCR meter test and measurement requirements. Features and Specifications of the Agilent/ HP 4284A LCR Meter include: 20 Hz to 1 MHz. With over 8,600 test frequencies 0.05% basic accuracy. 6-digit resolution Constant V or I test signal level List sweep measurement capability Parameters Measured: |Z |-q. |Y |-q, R-X, G-B C-D, Q, ESR, G, Rp L-D, Q, ESR, G, Rp Deviation and% deviation Measurement Circuit Modes: Series and parallel Ranging: Auto and manual Trigger: Internal. External, manual, and bus(HP-IB) Delay Time: 0 to 60.000s in 1 ms steps Measurement Terminals: Four-terminal pair Test Cable Length: Standard: 0 and 1 m Integration Time: Short. Medium, and long Averaging: 1 to 256. Programmable Test Signal: 20 Hz to 1 MHz. 8610 selectable frequencies Test Signal Modes Normal: Programs selected voltage or current at the measurement terminals open or shorted. Respectively, and not at the device under test. Constant: Maintains selected voltage or current at the device under test independent of changes in the device's impedance. Test Signal Levels(rms) Normal: 5mV to 2V. 50µA to 20mA Constant: 10mV to 1V. 100µA to 10mA DC Bias: 0V. 1.5V and 2V This unit includes the following options: 001- Power Amp/ DC
Buy It Now
$230.00 Shipping Condition: Used Location: China In these bad economic times. Get more“bang” for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A ... moreWELL KNOWN SELLER AND BUYER OF ALL WORKING TEST EQUIPMENT.WE OUR ONE OF EBAYS TOP SELLERS OF TESTED. WORKING, AND CALIBRATED TEST EQUIPTMENT FOR OVER ELEVEN YEARS. I AM A MAN OF MY WORD. OUR GOAL IS TO EXCEED CUSTOMER’S EXPECTATIONS. YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, HP- AGILENT 4192A 5 Hz to 13 MHz LF IMPEDANCE ANALYZER WITH MANUAL! It was just calibrated. Date Due 05/07/14. The unit is in good to great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial# is 2045J00282. Will works with 120& 240 voltage. We always re-check the item before we ship it. This makes sure the item is working when it left my shop. No options are marked. WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE. WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE(3) DAYS. HP 4192A LF impedance analyzer performs both network analysis and impedance analysis on such devices such as telecommunication filters. Audio/video electronic circuits, and basic electronic components. Both floating and grounded devices can be tested. Features& Specifications* 5 Hz to 13 MHz variable frequency* Swept measurement capability* Gain-phase measurements: amplitude. Phase, group delay* Floating or grounded devices* Impedance measurement: |Z|, |Y|, Theta, R, X, G, B, L, C, D, Q, Delta, Delta% GPIB. For more information and Specs: I HAVE THE HP- AGILENT 4191A RF IMPEDANCE ANALYZER WITH THE HP- AGILENT 16093A BINDING POST FIXTURE AND MANUAL. HP- AGILENT 4195A 10 Hz to 500 MHz NETWORK/ SPECTRUM ANALYZER WITH CABLES AND MANUALS, HP- AGILENT 15709A 100 Hz- 25 MHz HIGH IMPEDANCE INTERFACE, AGILENT- HP 4395A 10 Hz- 500 MHz NE
Buy It Now
$230.00 Shipping Condition: Used Location: China In these bad economic times. Get more“bang” for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A ... moreWELL KNOWN SELLER AND BUYER OF ALL WORKING TEST EQUIPMENT.WE OUR ONE OF EBAYS TOP SELLERS OF TESTED. WORKING, AND CALIBRATED TEST EQUIPTMENT FOR OVER ELEVEN YEARS. I AM A MAN OF MY WORD. OUR GOAL IS TO EXCEED CUSTOMER’S EXPECTATIONS. YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, HP- AGILENT 4192A 5 Hz to 13 MHz LF IMPEDANCE ANALYZER WITH MANUAL! It was just calibrated. Date Due 05/07/14. The unit is in good to great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial# is 2045J00282. Will works with 120& 240 voltage. We always re-check the item before we ship it. This makes sure the item is working when it left my shop. No options are marked. WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE. WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE(3) DAYS. HP 4192A LF impedance analyzer performs both network analysis and impedance analysis on such devices such as telecommunication filters. Audio/video electronic circuits, and basic electronic components. Both floating and grounded devices can be tested. Features& Specifications* 5 Hz to 13 MHz variable frequency* Swept measurement capability* Gain-phase measurements: amplitude. Phase, group delay* Floating or grounded devices* Impedance measurement: |Z|, |Y|, Theta, R, X, G, B, L, C, D, Q, Delta, Delta% GPIB. For more information and Specs: I HAVE THE HP- AGILENT 4191A RF IMPEDANCE ANALYZER WITH THE HP- AGILENT 16093A BINDING POST FIXTURE AND MANUAL. HP- AGILENT 4195A 10 Hz to 500 MHz NETWORK/ SPECTRUM ANALYZER WITH CABLES AND MANUALS, HP- AGILENT 15709A 100 Hz- 25 MHz HIGH IMPEDANCE INTERFACE, AGILENT- HP 4395A 10 Hz- 500 MHz NE
Buy It Now
$120.00 Shipping Condition: Used Location: Hong Kong SAR China Transportation services.
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$20.00 Shipping Condition: New Location: China We send the products randomly. We will do our best and help you provide the solution.
Buy It Now
$450.00 Shipping Condition: Used Location: Taiwan Option 010, (4396B-010/706/800). I hope the item is able to comply with your test engineering and applications.
Buy It Now
Free Shipping Condition: Used Location: Hong Kong SAR China Brand Agilent Model 4288A MPN 4288A UPC Does not apply.
Buy It Now
$20.00 Shipping Condition: New Location: China We send the products randomly.
Buy It Now
$150.00 Shipping Condition: Used Location: China The PM6306 function is good.
Buy It Now
$170.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$200.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$230.00 Shipping Condition: Used Location: 罗湖区, China In these bad economic times. Get more“bang” for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A ... moreWELL KNOWN SELLER AND BUYER OF ALL WORKING TEST EQUIPMENT.WE OUR ONE OF EBAYS TOP SELLERS OF TESTED. WORKING, AND CALIBRATED TEST EQUIPTMENT FOR OVER ELEVEN YEARS. I AM A MAN OF MY WORD. OUR GOAL IS TO EXCEED CUSTOMER’S EXPECTATIONS. YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, HP- AGILENT 4192A 5 Hz to 13 MHz LF IMPEDANCE ANALYZER WITH MANUAL! It was just calibrated. Date Due 05/07/14. The unit is in good to great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial# is 2045J00282. Will works with 120& 240 voltage. We always re-check the item before we ship it. This makes sure the item is working when it left my shop. No options are marked. WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE. WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE(3) DAYS. HP 4192A LF impedance analyzer performs both network analysis and impedance analysis on such devices such as telecommunication filters. Audio/video electronic circuits, and basic electronic components. Both floating and grounded devices can be tested. Features& Specifications* 5 Hz to 13 MHz variable frequency* Swept measurement capability* Gain-phase measurements: amplitude. Phase, group delay* Floating or grounded devices* Impedance measurement: |Z|, |Y|, Theta, R, X, G, B, L, C, D, Q, Delta, Delta% GPIB. For more information and Specs: I HAVE THE HP- AGILENT 4191A RF IMPEDANCE ANALYZER WITH THE HP- AGILENT 16093A BINDING POST FIXTURE AND MANUAL. HP- AGILENT 4195A 10 Hz to 500 MHz NETWORK/ SPECTRUM ANALYZER WITH CABLES AND MANUALS, HP- AGILENT 15709A 100 Hz- 25 MHz HIGH IMPEDANCE INTERFACE, AGILENT- HP 4395A 10 Hz- 500 MHz NE
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$160.00 Shipping Condition: New – Open box Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$170.00 Shipping Condition: Used Location: China
Buy It Now
$237.76 Shipping Condition: Used Location: Cupertino, United States Option : 1D5/1D6/1DN/1DR/! DS/A4H/B72/BAA.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$200.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$135.00 Shipping Condition: Used Location: Culver City, United States Not a problem. If you don't see it in the pictures, it is not included. 10 Adc with the Agilent 42841A.
Buy It Now
$10.00 Shipping Condition: New Location: China We send the products randomly.
Buy It Now
$300.00 Shipping Condition: Used Location: South Korea Agilent E4991A Impedance/ Material Analyzer. 1MHz to 3GHz, without test fixture.
Buy It Now
$160.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$220.00 Shipping Condition: Used Location: South Korea With option 001.
Buy It Now
$220.00 Shipping Condition: Used Location: South Korea With option 001.
Buy It Now
$220.00 Shipping Condition: Used Location: South Korea With option 001.
Buy It Now
$150.00 Shipping Condition: New – Open box Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$150.00 Shipping Condition: Used Location: China
Buy It Now
$150.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$300.00 Shipping Condition: Used Location: China We have 4 units Used WAYNE KERR WK 6500B ,Seven models of 20Hz~5MHz, 10MHz, 15MHz, 20MHz, 30MHz, 50MHz and 120MHz. The default is the price of 30MHz with ... morea fixture. We will do our best and help you provide the solution.
Buy It Now
$166.11 Shipping Condition: Used Location: Farmingdale, United States Model: 4285A. Options: 001, 700.
Buy It Now
$70.00 Shipping Condition: Used Location: Singapore 20,000 counts resolution with dual display. We look forward to receive your supports. Relative mode and Data Hold function.
Buy It Now
$300.00 Shipping Condition: Used Location: Singapore Option 001: Internal DC Bias. We look forward to receive your supports.
Buy It Now
$113.42 Shipping Condition: Used Location: Farmingdale, United States The wide 20 Hz to 1 MHz test frequency range and superior test-signal performance allow the 4284A to test components to the most commonly-used test standards, ... moresuch as IEC/MIL standards, and under conditions that simulate the intended application.
Buy It Now
$184.28 Shipping Condition: Used Location: Farmingdale, United States Model: 4286A. Options: 001, 002, 021.
Buy It Now
$66.12 Shipping Condition: Used Location: Farmingdale, United States Model: 4263B. AC Test signal level: 20 mV to 1 mVrms in 5 mV step. DC and six frequencies (100/120/1 k/10 k/20 k/100 kHz). 0.1% basic accuracy. Wide fixture ... moreavailability. Up to 4 m cable extension. OPEN/SHORT/LOAD correction.
Buy It Now
$300.00 Shipping Condition: Used Location: Singapore HP/ Agilent 4284A 20Hz- 1MHz Precision LCR Meter with Options 001& 006- CALIBRATED! You are bidding on an HP/ Agilent 4284A 20Hz- 1MHz Precision LCR ... moreMeter with Options 001(High Power(20V. 200mA, 0-40V DC Bias) and 006(2m/4m Cable Length Operation) This unit was just calibrated in February 2014 and will come with a fresh certificate of calibration. The 4284A precision LCR meter is a cost-effective solution for component and material measurement. The wide 20 Hz to 1 MHz test frequency range and superior test-signal performance allow the Agilent 4284A to test components to the most commonly-used test standards, such as IEC/MIL standards, and under conditions that simulate the intended application. Whether in research and development, production, quality assurance, or incoming inspection, the Agilent 4284A will meet all of your LCR meter test and measurement requirements. Features: Wide Range DC Current Biased Inductance Measurement-List sweep measurement capability You can view the specs for this unit here: This unit is in excellent condition. Has been fully tested and is guaranteed functional. It comes w/ a 5 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by company check. Cashiers check and wire transfer only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are
Buy It Now
$40.37 Shipping Condition: Used Location: Farmingdale, United States Test Station accessory for 4291A or 4291B. This is the test station accessory for the 4291A & 4291B impedance analyzers. Model: 4291A/B Test Station. ... moreMake: Agilent/Keysight.
Buy It Now
$124.33 Shipping Condition: Used Location: Farmingdale, United States It makes the 4279A ideal for the precise characterization and testing of varactor diodes, MOS diodes, etc. Model: 4279A. Item Specifics/Condition.
Buy It Now
$120.00 Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$100.00 Shipping Condition: Used Location: China We send the products randomly. We will do our best and help you provide the solution.
Buy It Now
$120.00 Shipping Condition: Used Location: China
Buy It Now
$140.00 Shipping Condition: Used Location: China We will do our best and help you provide the solution. Price reduction is not acceptable.
Buy It Now
$100.00 Shipping Condition: Used Location: China
Buy It Now
Free Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
$120.00 Shipping Condition: Used Location: China
Buy It Now
$140.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$120.00 Shipping Condition: Used Location: China
Buy It Now
$100.00 Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
$130.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$120.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$220.00 Shipping Condition: Used Location: South Korea With option 001 710 710.
Buy It Now
$220.00 Shipping Condition: Used Location: South Korea With option 001 710 710.
Buy It Now
Free Shipping Condition: Used Location: Hong Kong SAR China We will indicate the new and old condition of the product on the product title. Hope to understand. As long as you want, we will reply to you as soon ... moreas possible. Your praise can make us work harder, hope to leave a good review for us.
Buy It Now
$150.00 Shipping Condition: Used Location: China
Buy It Now
$120.00 Shipping Condition: Used Location: China
|
|
|