|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 22" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The free floating design allows the curved blade to follow the contour of the ground on uneven surfaces. The blade, which angles 28 degrees in both directions, ... moreis supported by two(2) horizontal support braces that run the length of the blade.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The free floating design allows the curved blade to follow the contour of the ground on uneven surfaces. The blade, which angles 28 degrees in both directions, ... moreis supported by two(2) horizontal support braces that run the length of the blade.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States NEW 84" SNOW PLOW/ DOZER BLADE ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a NEW Extreme-Duty 84" Snow ... morePlow/ Dozer Blade combo attachment for skid steer loaders and compact tractors. This attachment can be used as both a snow plow or heavy-duty 4-way dozer blade for moving earth and/or various other materials. To use as a snow plow. Simply pull center blade locking pin to allow the blade to"trip" upon hitting obstruction or uneven surface. The powerful springs retract the blade back into position after clearing obstruction. This attachment comes fully assembled and is made of Heavy-Duty A36 grade steel throughout with a 6" tall x 1/2" thick AR400 high carbon steel bolt-on cutting edge. It features two(2) heavy-duty 3" bore x 6" stroke American made hydraulic cylinders. Four(4) large adjustable HD trip springs, two(2) large adjustable/ removable skid shoes, grease-able pivot points, Parker hoses and flat-faced couplers. The heavy-duty 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 3" center pivot/ angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors. Weight is 875 lbs. Optional 1" thick rubber and poly cutting edges are also offered. Available in 72" 84" 96" sizes. Compare& Save. Made in the USA! NOTE: Pictures show 96" model) SPECIFICATIONS: Constructed with A36& AR400 high carbon grade steel throughout Two(2) HD 3" bore x 6" stroke American made cylinders Two(2) large HD adjustable/ removable skid shoes HD 3" square tubular horizontal support brace 6" tall x 1/2" thick AR400 bolt-on cutting edge Nine(9) 1/4" thick vertical support braces Four(4) large HD adjustable trip springs HD 3" center pivot/ angle pin Greaseable pivot points Parker hoses and flat-faced couplers included Optional 1&
Buy It Now
Condition: New Location: Cleveland, United States NEW 84" SNOW PLOW/ DOZER BLADE ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a NEW Extreme-Duty 84" Snow ... morePlow/ Dozer Blade combo attachment for skid steer loaders and compact tractors. This attachment can be used as both a snow plow or heavy-duty 4-way dozer blade for moving earth and/or various other materials. To use as a snow plow. Simply pull center blade locking pin to allow the blade to"trip" upon hitting obstruction or uneven surface. The powerful springs retract the blade back into position after clearing obstruction. This attachment comes fully assembled and is made of Heavy-Duty A36 grade steel throughout with a 6" tall x 1/2" thick AR400 high carbon steel bolt-on cutting edge. It features two(2) heavy-duty 3" bore x 6" stroke American made hydraulic cylinders. Four(4) large adjustable HD trip springs, two(2) large adjustable/ removable skid shoes, grease-able pivot points, Parker hoses and flat-faced couplers. The heavy-duty 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 3" center pivot/ angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors. Weight is 875 lbs. Optional 1" thick rubber and poly cutting edges are also offered. Available in 72" 84" 96" sizes. Compare& Save. Made in the USA! NOTE: Pictures show 96" model) SPECIFICATIONS: Constructed with A36& AR400 high carbon grade steel throughout Two(2) HD 3" bore x 6" stroke American made cylinders Two(2) large HD adjustable/ removable skid shoes HD 3" square tubular horizontal support brace 6" tall x 1/2" thick AR400 bolt-on cutting edge Nine(9) 1/4" thick vertical support braces Four(4) large HD adjustable trip springs HD 3" center pivot/ angle pin Greaseable pivot points Parker hoses and flat-faced couplers included Optional 1&
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States ASV - BOBCAT - CASE - CATERPILLAR - DAEWOO - DOOSAN - FORD - GEHL - HYDRA MAC - HYUNDAI - JCB - JOHN DEERE - KIOTI - KOMATSU - KUBOTA - LIUGONG - MAHINDRA ... more- MONTANA - MUSTANG - NEW HOLLAND - POSI TRAC - SCAT TRAK - TAKEUCHI - TEREX - THOMAS - VOLVO - WACKER NUESON - YANMAR - & MANY OTHER MANUFACTURERS.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States ASV - BOBCAT - CASE - CATERPILLAR - DAEWOO - DOOSAN - FORD - GEHL - HYDRA MAC - HYUNDAI - JCB - JOHN DEERE - KIOTI - KOMATSU - KUBOTA - LIUGONG - MAHINDRA ... more- MONTANA - MUSTANG - NEW HOLLAND - POSI TRAC - SCAT TRAK - TAKEUCHI - TEREX - THOMAS - VOLVO - WACKER NUESON - YANMAR - & MANY OTHER MANUFACTURERS.
Buy It Now
Condition: New Location: Cleveland, United States ASV - BOBCAT - CASE - CATERPILLAR - DAEWOO - DOOSAN - FORD - GEHL - HYDRA MAC - HYUNDAI - JCB - JOHN DEERE - KIOTI - KOMATSU - KUBOTA - LIUGONG - MAHINDRA ... more- MONTANA - MUSTANG - NEW HOLLAND - POSI TRAC - SCAT TRAK - TAKEUCHI - TEREX - THOMAS - VOLVO - WACKER NUESON - YANMAR - & MANY OTHER MANUFACTURERS.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Free Shipping Condition: New Location: Amelia, United States Ohio Residents Only.
Buy It Now
Condition: New Location: Cleveland, United States The universal quick attach plate fits most makes and models of skid steer loaders and compact tractors. Weight is 1025 lbs. 4406276366 Compare & Save. ... moreHD 1" thick fully heat treated AR400 beveled shear blade.
Buy It Now
Condition: New Location: Cleveland, United States NEW HD TREE SHEAR ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a New Heavy-Duty(HD) Rotating Tree Shear attachment ... morefor skid steer loaders and compact tractors. Constructed of fully heat treated AR400 and A36 grade powder coated steel throughout. This HD tree shear features a powerful 5" bore x 12" stroke HD American made cylinder that produces up to 30 tons of shearing force. The heavy-duty 1" thick beveled shear blade is comprised of heat treated AR400 abrasion resistant high tensile steel capable of cutting 12" thick trees and logs with ease. This attachment features a 90 degree manual rotating head allowing you to cut and prune in both the vertical& horizontal positions. Other key features include a HD mesh brush guard preventing stump or debris from entering cab. HD push-bar, side steps(for entering and exiting machine safely) greaseable pivot points, Parker hoses and flat-faced couplers. The universal quick attach plate fits most makes and models of skid steer loaders and compact tractors. Weight is 1025 lbs. Optional hydraulic-rotating& non-rotating models available. This attachment is ideal for cutting. Splitting, trimming, moving and clearing trees without ever having to leave the cab of your machine. Compare& Save. Made in the USA! NOTE: Pictures show manual rotating model) SPECIFICATIONS: Constructed in the U.S.A. with AR400& A36 grade American made steel Manual rotating shear head allows for vertical and horizontal cutting Convenient 1 man operation from the cab of your machine HD 1" thick fully heat treated AR400 beveled shear blade HD 5" bore x 12" stroke American made angle cylinder Flow range of 10-30 GPM(gallons per minute) Optional hydraulic-rotating model available Optional fixed-position model available Universal quick-attach mounting plate Parker hoses and flat-faced couplers HD push bar and mesh brush guard Greaseable pivot points& bearings Solid HD construction and design One year limited factory warr
Buy It Now
Condition: New Location: Cleveland, United States The universal quick attach plate fits most makes and models of skid steer loaders and compact tractors. Weight is 1025 lbs. 4406276366 Compare & Save. ... moreDo your research! Manual rotating shear head allows for vertical and horizontal cutting.
Buy It Now
Condition: New Location: Cleveland, United States NEW HD TREE SHEAR ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a NEW Heavy-Duty Rotating Tree Shear attachment for ... moreskid steer loaders and compact tractors. Comes fully assembled and is constructed of heat treated AR400 abrasion resistant& A36 grade powder coated steel throughout. This tree shear boasts a powerful 5" bore x 12" stroke American made cylinder that produces up to 30 tons of shearing force. The heavy-duty 1" thick beveled shear blade is comprised of heat treated AR400 abrasion resistant high tensile steel capable of cutting 12" diameter trees and logs with ease. This attachment features a 90 degree rotating head allowing you to cut and prune in both the vertical and horizontal positions. Other key features include a HD mesh brush guard preventing stump or debris from entering cab. HD pushbar, side steps for entering and exiting machine cab safely, greaseable pivot points, Parker hoses and flat-faced couplers. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors. Weight is 1025 lbs. Optional fixed position and hydraulic rotation models also available. This attachment is ideal for cutting, splitting, trimming, moving and clearing logs and without ever having to leave the cab of your machine. Compare& Save. Made in the USA! SPECIFICATIONS: Constructed with HD AR400& A36 grade steel throughout Convenient 1 man operation from the cab of your machine Rotating head allows for vertical or horizontal cutting HD 1" thick heat treated AR400 beveled shear blade HD 5" bore x 12" stroke American made cylinder Parker hoses and flat-faced couplers included Flow range of 10-30 GPM(gallons per minute) HD pushbar& safety mesh brush guard Universal quick-attach mounting plate Side steps for entering& exiting cab HD 2" square tubular support bars Solid HD construction and design One year limited factory warranty Optional hydraulic rotating head Optional fixed position head HD 3&
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Enhanced Durability and Safety LoJok pallet forks incorporate a sealing design, upgraded thicker carbon steel bolts, and a thickened tube wall design. ... moreDesigned to seamlessly fit popular tractor models such asJohn Deere andKubota Tractors equipped with a 3-point hitch, our pallet forks transform your skid steer into a multifunctional workhorse.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Designed to seamlessly fit popular tractor models such asJohn Deere andKubota Tractors equipped with a 3-point hitch, our pallet forks transform your ... moreskid steer into a multifunctional workhorse. You can rely on our forks for the long haul, no matter the task at hand.
Buy It Now
Condition: New Location: Cleveland, United States The free floating design allows the curved blade to follow the contour of the ground on uneven surfaces. The blade, which angles 30 degrees in all directions, ... moreis supported by four(4) 1/4" thick vertical support braces and two(2) horizontal support braces that run the length of the blade.
Buy It Now
Condition: New Location: Cleveland, United States The free floating design allows the curved blade to follow the contour of the ground on uneven surfaces. The blade, which angles 30 degrees in all directions, ... moreis supported by six(6) 1/4" thick vertical support braces and two(2) horizontal support braces that run the length of the blade.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States NEW 96" SNOW PLOW/ DOZER BLADE ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a NEW Extreme-Duty 96" Snow ... morePlow/ Dozer Blade combo attachment for skid steer loaders and compact tractors. This attachment can be used as both a snow plow or heavy-duty 4-way dozer blade for moving earth and/or various other materials. To use as a snow plow. Simply pull center blade locking pin to allow the blade to"trip" upon hitting obstruction or uneven surface. The powerful springs retract the blade back into position after clearing obstruction. This attachment comes fully assembled and is made of Heavy-Duty A36 grade steel throughout with a 6" tall x 1/2" thick AR400 high carbon steel bolt-on cutting edge. It features two(2) heavy-duty 3" bore x 6" stroke American made hydraulic cylinders. Four(4) large adjustable HD trip springs, two(2) large adjustable/ removable skid shoes, grease-able pivot points, Parker hoses and flat-faced couplers. The heavy-duty 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 3" center pivot/ angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors. Weight is 925 lbs. Optional 1" thick rubber and poly cutting edges are also offered. Available in 72" 84" 96" sizes. Compare& Save. Made in the USA! NOTE: Pictures show 96" model) SPECIFICATIONS: Constructed with A36& AR400 high carbon grade steel throughout Two(2) HD 3" bore x 6" stroke American made cylinders Two(2) large HD adjustable/ removable skid shoes HD 3" square tubular horizontal support brace 6" tall x 1/2" thick AR400 bolt-on cutting edge Nine(9) 1/4" thick vertical support braces Four(4) large HD adjustable trip springs HD 3" center pivot/ angle pin Greaseable pivot points Parker hoses and flat-faced couplers included Optional 1&
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States Or light-duty 4-way dozer blade for moving various loose materials. To use as a snow plow, simply pull center blade locking pin to allow the blade to ... more"trip" upon hitting obstruction or uneven surface.
Buy It Now
Condition: New Location: Cleveland, United States NEW HD TREE SHEAR ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a New Heavy-Duty(HD) Rotating Tree Shear attachment ... morefor skid steer loaders and compact tractors. Constructed of fully heat treated AR400 and A36 grade powder coated steel throughout. This HD tree shear features a powerful 5" bore x 12" stroke HD American made cylinder that produces up to 30 tons of shearing force. The heavy-duty 1" thick beveled shear blade is comprised of heat treated AR400 abrasion resistant high tensile steel capable of cutting 12" thick trees and logs with ease. This attachment features a 90 degree manual rotating head allowing you to cut and prune in both the vertical& horizontal positions. Other key features include a HD mesh brush guard preventing stump or debris from entering cab. HD push-bar, side steps(for entering and exiting machine safely) greaseable pivot points, Parker hoses and flat-faced couplers. The universal quick attach plate fits most makes and models of skid steer loaders and compact tractors. Weight is 1025 lbs. Optional hydraulic-rotating& non-rotating models available. This attachment is ideal for cutting. Splitting, trimming, moving and clearing trees without ever having to leave the cab of your machine. Compare& Save. Made in the USA! NOTE: Pictures show manual rotating model) SPECIFICATIONS: Constructed in the U.S.A. with AR400& A36 grade American made steel Manual rotating shear head allows for vertical and horizontal cutting Convenient 1 man operation from the cab of your machine HD 1" thick fully heat treated AR400 beveled shear blade HD 5" bore x 12" stroke American made angle cylinder Flow range of 10-30 GPM(gallons per minute) Optional hydraulic-rotating model available Optional fixed-position model available Universal quick-attach mounting plate Parker hoses and flat-faced couplers HD push bar and mesh brush guard Greaseable pivot points& bearings Solid HD construction and design One year limited factory warr
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States NEW HD 72" SNOW PLOW ATTACHMENT Universal Quick Attach- Fits Most Makes& Models You are looking at a NEW Heavy-Duty 72" Snow Plow attachment ... morefor skid steer loaders and compact tractors. Comes fully assembled and is made of Heavy-Duty A36 grade steel throughout with a 10" tall x 1/2" thick AR400 high carbon steel bolt-on cutting edge. This snow plow features a heavy-duty 3" bore x 6" stroke American made hydraulic cylinder. Four(4) large HD trip springs, two(2) large 8" adjustable/ removable skid shoes, large roll top blade, grease-able pivot points, Parker hoses and flat-faced couplers. The HD roll top blade is supported by seven(7) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center pivot/ angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors. Weight is 690 lbs. Optional 1" thick rubber and poly cutting edges are also offered. Available in 72" 84" 96" sizes. Compare& Save. Made in the USA! NOTE: Pictures show 96" model) SPECIFICATIONS: Constructed with A36& AR400 high carbon grade steel Two(2) large HD adjustable/ removable skid shoes HD 3" bore x 6" stroke American made cylinder 10" tall x 1/2" thick AR400 bolt-on cutting edge Seven(7) 1/4" thick vertical support braces Large 3/16" thick roll-top design blade HD 3" square tubular support brace HD 2" center pivot/ angle pin Four(4) large HD trip springs Parker hoses and flat-faced couplers included Optional 1" thick rubber or poly edge available Universal quick-attach mounting plate Solid HD construction and design One year limited factory warranty Greaseable pivot points Overall Dimensions: 72" Wide x 34" Tall x 47" Deep 690 lbs 1 YEAR FACTORY WARRANTY! JOHN DEERE. GLOBAL/ EURO STYLE, X-LARGE& MINI UNIVERSAL ATTACH MOUNTS AVAILABLE! Our attachments fit the following brands of skid steer loader
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 22" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 22" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 22" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The universal quick attach plate fits most makes and models of skid steer loaders and compact tractors. Weight is 1025 lbs. 4406276366 Compare & Save. ... moreManual rotating shear head allows for vertical and horizontal cutting.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 30" tall curved blade is supported by six(6) vertical support braces, a 3" tubular support brace that runs the length of the blade, and a 2" center ... morepivot / angle pin. The universal quick attach mount fits most makes and models of skid steer loader and compact tractors.
Buy It Now
Condition: New Location: Cleveland, United States The 26.5" tall curved blade is supported by nine(9) 1/4" thick vertical support braces, a 3" tubular support brace that runs the length of the blade, ... moreand a 3" center pivot / angle pin. The universal quick attach plate fits most makes and models of skid steer loader and compact tractors.
|
|
|
|
Vintage Universal 3 Meat Grinder Fine Blade Lot 2 Cutting Wheel Disk Plate Disc
Vintage Universal 3 Meat Grinder Fine Blade Lot 2 Cutting Wheel Disk Plate Disc to start a new paragraph use- Here is a vintage meat grinder cutting blade it measures 2 5/8” in diameter and is contoured to fit the Universal 3 Meat Grinder. Most all of our Vintage and Used Items are bought from Estate Sales. Yard/Garage/Tag Sales, Flea Markets, Secondhand/Thrift Stores and Auctions. I often have no idea of what type of home environment these items came from preceding my purchase, if I obtain any information for an item I will always list with such information. All of my Vintage and Used Items are sold as is as seen in the photos. Please feel free to email us anytime. We want all your questions or concerns to be addressed to insure a smooth transaction, we will reply in a timely manner. Feedback If you are satisfied with your transaction with ... moreus. Please leave your 5-Star positive feedback for us and we will be sure to reciprocate when we do our feedback updates. If you have a problem with your purchase, please give us the courtesy of an email, BEFORE leaving an unpleasant feedback. Happy Bidding. Enjoy and Thank You! I'm PayPal Verified to start a paragraph- Paypal is our ONLY form of payment accepted; it is the safest online payment method; You can also pay with echecks. Visa, MasterCard, Discover, or American Express through the Paypal website without an account. We ship to the Continental US only. Because our distributors/suppliers reserve the right to limit shipments to within the Continental U.S. All orders must have a residential ship-to address, please be sure your address is correct on your eBay/Paypal payment invoice, as that is the address we must ship to. We are not able to ship to: P.O. Box, APO, FPO or any shipping addresses outside the Continental U.S. Combined shipping is not offered on most of the merchandise we are selling, as our distributors/suppliers are in different locations. Our shipping and handling charges are exactly what our distributors/suppliers charge to ship each item to y
|
|
|
3 Blade Fleam Medical Bleeding Knife (G-Gregory)(Cast Steel)
Up for auction is an antique 19th Century FLEAM(a veterinary or medical blood letting tool) All three steel blades are stamped with a maker's mark: G. GREGORY. Measures 3-3/8" long. Overall excellent condition as pictured.
|
|
|
FES Japan Made 3-1/4" 2 Blade Gent's World's Fair Knoxville 1982 Knife MINT
This FES Japan Made 3-1/4" 2 Blade Gent's World's Fair Knoxville 1982 Gentleman's knife has not been used and carried and is mint. Blade has good snap. Worlds fair etch one side. Check out my other items! Be sure to add me to your favorites list! Please email with any questions and check our other auctions. Pay me securely with any major credit card through PayPal! Any bone handles are bovine unless otherwise stated. International shipping is extra. Not responsible for non insured shipments. Combine wins up to 7 days(add $1.00 additional for each extra knife) for savings on shipping. Please include the closing date and item number with payment. Please email with any questions. We usually ship within one business day after receipt of payment. Items not paid for in 10 days are subject to being relisted.
|
|
|
VINTAGE WWII 3 BLADE PROPELLOR PENCIL. USED BY NAVIGATOR. REALLY NEAT. LOOK!
OUR MISSION BRING TO AUCTION UNIQUE ESTATE FINDS with LOW STARTING BIDS and ABSOLUTELY NO RESERVES! CONTINUE PROVIDING GREAT CUSTOMER SERVICE ON WHICH WE HAVE BUILT OUR UNPARALLELED REPUTATION LOADED WITH OUR SATISFIED CUSTOMERS POSITIVE FEEDBACK. AS IN THE PREVIOUS YEARS WE LOOK FORWARD TO SERVING YOU. NO RESERVE AUCTIONS. COMBINE SHIPPING TO SAVE YOU MONEY. LOW STARTING BID. I got this right out of a desk drawer at an estate sale recently and was told by the daughter that her father was a navigator on a B-17 during WWII and she believed this is one of the pencils he used on runs. She said he brought them back for the kids to use. Pencil paint is red. White and blue. The little brass eraser holder part has the 3-blade propellor image on it. Not much of a pencil left.the whole thing is only about 2 1/2 inches long. This is all I know but ... moreit does seem plausible. That is the story I got and I'm stickin' with it! Happy bidding!
|
|
|
VTG WW2 Bayonet Knife UC US M1 Flaming Bomb Sheath 9 3/4 Inch Blade
VTG WW2 Bayonet Knife UC US M1 Flaming Bomb Sheath 9 3/4 Inch Blade Up for auction is a vtg US WWII Flaming Bomb military knife. I know nothing about these knives, picked this up at an estate sale, measure's approx. 15 1/2" long, the blade measures approx. 9 3/4" Looks well used and is very sharpe. The tip of the sheath is a bit chewed up. Be sure to take a good look at all the pic's.Thanks! A few details you may need know. I am not a store. I do this on the side for extra income. I am not an expert on any item. Unless noted. All of my items are used, unless noted. Many are from estate sales or from my home. I will always do my best to describe items accurately and take many pictures. All items are sold as is.Always feel free to ask questions. U.S. Bidders only. Shipping costs always includes delivery confirmation and Handling. ... moreBe assured that all breakables are packed well and all items come from smoke free home. Thanks and Happy Bidding
|
|
|
PlayStation 3 15 Blade Fan for CECHA01 CECHB01 CECHE01 CECHG01
PlayStation 3(PS3) internal cooling fan is in great condition and works perfectly. Be sure to check out my other items for sale. Which include several other PS3 parts/accessories!
|
|
|
Vintage Wilson Staff Tour Blade FG-17 Golf Club Irons Set, 3-9, Stiff Shaft
Vintage Wilson Staff Tour Blade FG-17 Golf Club Irons Set. 3-9, Stiff Shaft The pictures do most of the work of describing the clubs. They do show some wear. And most of the original grips have been replaced. A small amount of corrosion is evident in the striking face of a few irons. But overall, I rate the clubs as good vintage condition and absolutely playable. Enjoy! We ship immediately upon your completion of the checkout process; In most cases. Your item is already professionally packaged and awaiting only an address label to begin its journey home to you. We care immensely about your complete satisfaction and always try to offer the lowest possible prices on an inventory consisting of only quality/ premium goods. In order to keep our prices below that of almost all our competitors worldwide. We only accept returns in the event of substantive ... moremisrepresentation of the product. In the case of electronic or mechanical items arriving in non-working condition, an insurance claim will be filed with the shipping carrier, the item will be remanded to that carrier, and a refund will be processed. Unless otherwise stated, we do test all our items to the best of our ability, search every garment for flaws, and only list things for sale that we would want and feel completely secure purchasing ourselves for use in our own homes. We cannot stress enough how much our customers complete satisfaction means to us. We look forward to building a longterm relationship with all our clients and encourage everyone to please contact us with any questions or concerns before purchasing. Thank you for your interest and for the opportunity to earn you business. Warmest Regards, The Grapevine Team
|
|
|
Berkel Meat Commercial 13 3/4" Blade Electric Meat/Deli Slicer Countertop
Search Description Berkel Meat Commercial 13 3/4" Blade. Slicer tray 9 1/2 inches wide. Electric Meat/Deli Slicer Countertop 19Junhjt. We accept payment through paypal. But we are also open to other forms of payment. We can accept credit cards through our physical business, allow cash payments on pickup and will accepts your checks if you would like( item held from shipment until payment clears) Please contact use if you would like to pay by another way and we will do our best to work with you. We ship as quickly as we can. We often reuse old boxes that are still in good shape to help save trees. Please be considerate of this if you get a box that is old. The faster you pay the quicker we can ship. We use caculated shipping using a stadardized shipping for. We do send items the quickest way that is payable by your shipping fees, we often ... moreupgrade to priority service on orders because the price is close to slower services. If there is a difference in cost we will pick this up for you. Be sure to read all terms in the listing. Surplus Equipment Supply. Hartsville(MAIN) Office: 122 Rogers St. Suite 3. Hartsville.Tn.37074 Hartsville Office:615) 374-9738 BUYERS& SELLERS OF GOOD USED EQUIPMENT $$$$ ACTIVELY BUYING YOUR SURPLUS/BONE YARD EQUIPMENT $$$$. I try to be as accurate as possible. But I am not familiar with every piece of equipment that I sell. I also have several people listing items that do not know anything about the items, so, please take time to look at all the photos, because what you see is what you get. We buy Truckloads of equipment at a time and sometimes do not have time to check all the machines out to see if they work or not. You are buying just like I am. And you must remember that you are buying a lot cheaper than the other guys are selling. If I have checked the machine out, I will list it as Working or Not Working. The majority of our items are as is and untested. We plug most machines in and if they come on we will let you know. Please be sure to read all the listing, check out the pic
|
|
|
Starrett Depth Micrometer, Non Rotating, Flat Blade, 0-3 N0. 449 SATIN
Starrett Depth Micrometer non rotating flat type of blade with SATIN Finish. This depth mic is used for checking narrow openings where a round rod type would not fit. This flat rod non rotating depth micrometer can also be used just like the round rod type. It comes with additional flat bars so you can measure from 0-3" It also has the original wood case. This micrometer has had the owners markings removed/ground off and there is some sign of this. But it does not affect the functionality of the tool. The lock also does not work. This depth mic works very smoothly! Thanks for looking! Ask questions if you have any. NO RESERVE!
|
|
|
C-- 6-3/16'' TURKEYTAIL BLADE FLINT KNAPPING ART ARROWHEAD CHERT ARROWHEADS
Check out my! YOU ARE LOOKING A NICE MADE TURKEYTAIL BLADE. MADE FROM PEORIA OKLAHOMA KIOKUK CHERT. IT IS THIN WITH NICE FLAKING PATTERN. ALSO IT HAS A SHARP CUTTING EDGE. COLOR IS WHITE WITH SOME SMOKE COLOR. NICE REPRODUCTION PLEASE PAY WITHIN 5 DAYS OR CONTACT ME. THANKS sorry no interenational buyers. COMBINE MULTIPLE WINS.SAVES $$$ MADE IN U.S.A. BY ME CHEROKEE INDIAN. PLEASE TAKE TIME TO VIEW ALL OF MY NICE REPRODUCTIONS THEY ARE VERY WELL FLAKED.SHAPED RIGHT,I USE MANY DIFFERENT TYPES AND COLORS OF HIGH GRADE FLINTS AND CHERTS.FROM OKLAHOMA,TEXAS,MISSOURI. AND THEY ALL COME WITH A 100% SATISFACTION GUARENTEE IF NOT E-MAIL ME BEFORE YOU SEND IT BACK IN THE SAME CONDITION YOU RECEIVED IT. I DO COMBINE MULTIPLE WINS. THANKS FOR STOPPING BY AND LOOKING CHECK OUT ALL MY AUCTIONS BEFORE YOU LEAVE AND THANK YOU AND HAVE A NICE DAY.
|
|
|
Vintage Walter Hagen The Haig Blade Irons 2-9 iron w/ CF-3 Steel Shafts -Nice!!
Please Scroll Down to view all photos. This is a vintage set of Walter Hagen"The Haig" Blade Irons. These irons all have a classic blade design and come with CF-3 Steel Shafts. They will be a nice vintage set of blade irons to own. Specs: Length of 5 iron- 37.5" Grips- Original Hagen Grips Shafts- Hagen CF-3 Steel Shafts(Reg Flex? These clubs are in very good used condition. The shafts on all of the clubs look great and the grips are original. But worn and probably need to be replaced. The clubheads on all of the irons have several light scratches and tiny dings on the bottom. A few of the clubs have some minor chrome wear around the edges and all of the clubs have nice grooves with light scratches on the face. I am asking $150 or best offer and Shipping is $14 for anywhere in the Continental USA Please see all photos below ... morefor details + Check out my other Auctions to Combine Shipping. Shipping Info& Additional Info: International Bidders please email me about shipping costs Fixed shipping charges are for ground shipping to the Continental United States. Either Fedex or USPS. Payment is only accepted through Paypal. Via Paypal.com I can take all major credit cards. If you don't have a paypal.com account it takes just a few moments to set one up at Paypal.com. Once payment clears Paypal. I will ship out in 24-36 hours Monday thru Friday. WI and IL residents are subject to sales tax Fixed shipping charges are for ground shipping to the Continental United States. I ship either Fedex or USPS. Payment is only accepted through Paypal. Via Paypal.com we can take all major credit cards. If you don't have a paypal.com account it takes just a few moments to set one up at Paypal.com. Orders are shipped 24 to 36 hours after payment clears paypal. gsrx_vers_473(GS 6.4.1(473)
|
|
|
Razer Blade RZ09-00710100-R1U1 17.3" Notebook - Customized R2
This is a second generation razer blade. It's fast. Thin and sexy. I've upgraded the original specs as such: Ram upgraded from 8gb to 16gb(corsair vengeance) The 64gb ssd cache has been replaced by a mushkin atlas 480gb ssd as the boot drive, and the 500gb hard drive has been replaced by a Samsung 830 series 512gb ssd. I've also upgraded to windows 8 pro and will include a key for the upgrade. It comes with the original razer box as well. Posted with
|
|
|
Vintage Remington 1866/71 USA 1873 Socket Bayonet Blade 17 3/4" Long
Vintage Remington 1866/71 USA 1873 Socket Bayonet Blade 17 3/4" Long Thanks for viewing my items, Low Starting bid with no reserve. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f8faa30ad-0xed-
|
|
|
Vintage US 1871 Socket Bayonet Marked 1873 A Marked Blade 18 3/8" Long
Vintage US 1871 Socket Bayonet Marked 1873 A Marked Blade 18 3/8" Long Made At Fayetteville and in Mississippi Only 10000 Made. Thanks for viewing my items. Low Starting bid with no reserve.
|
|
|
Kinson 1907 WW1 bayonet , overall length 21.3/4 inches/ blade length 17 inches
numbers appear to be 15/123 overall length 213/4. Blade length 17 inches also has numbers 11 901,
|
|
|
GERBER STOCKMAN 3-BLADE STAG FOLDING KNIFE
Please read item description thoroughly. Pictures are of the actual item(s) in the auction. Please see pictures for wear and additional information. Don't hesitate to contact us! We are available Monday- Friday. 9am- 7pm. Phone- 713-534-7296 This auction is for a Gerber Stockman 3-blade stag folding knife. This knife is in very good used condition with light scratches and wear. There are no additional items included. Overall Length: 6.13" Blade Length: 2.75" Closed Length: 3.5" Weight: 2.6 oz. Blade Style: Clip Point Handle Material: Genuine Stag*Payment must be received within 2 weeks of auction ending. We only accept payments through PayPal. PayPal address needs to be confirmed. Shipping quote for continental US. Hawaii. Alaska please ask for quote! Will combine shipping; just ask for invoice. We no longer ship internationally. ... moreIncluding anywhere outside the USA. If there is a problem with your purchase. Item was not as described, not functioning, or you changed your mind, please notify us! 3 days to notify. No refunds on shipping. Please let us know if you have any problems at all. Local pickup available if paid through PayPal prior to pick-up(no shipping charge) Address- 2131 S Richey Rd- Pasadena. TX 77502 We are located at the corner of Richey Rd and Allen Genoa Rd. Across from Walgreens. Powered by f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f8fd519a5-0x105-
|
|
|
GOLF CLUB SET vintage forged HAGEN 770 muscle back blade Iron Set 3-PW
Complete all original classic Hagen 770 Iron Set 3-PW in quite good condition. No significant face wear. Deep grooves. Nice original stiff shafts. All the shaft bands are intact. Grips are actually okay.but of course you will want to change them. The 7 has some heavy nicks to the leading edge, the PW has some light edge nicks.I used flash on the club bottom photos which is pretty harsh, you can see what I'm describing easily, in person I think they look better. Look to be standard length and lie, RH. I believe these are fairly scarce and were manufactured in the best club factory for forged irons. Shipping to the lower 48 included. Elsewhere inquire.
|
|
|
Excel LH Vintage Wilson Staff FG-17 Blade 3-PW Rifle 5.5 Stiff Look!
THIS AUCTION IS FOR AN EXCELLENT SET OF VINTAGE LEFT HANDED WILSON FORGED FG-17 IRONS. THIS IS A FULL SET 3-PW AND THEY ARE EQUIPPED WITH RIFLE 5.5 STIFF FLEX SHAFTS AND GOLF PRIDE GRIPS IN EXCELLENT SHAPE. THIS SET IS STANDARD LENGTH AND LIE. THEY ARE AMAZING IRONS. IF YOUR LOOKING FOR VINTAGE SET OF STICKS THESE ARE THE ONES YOUR LOOKING FOR. A PLAYERS IRON. I SHIP INTERNATIONAL SO PLEASE CALCULATE COST BELOW.
|
|
|
FLINT KNAPPING ART TALLAHATTA QUARTZITE BLADE 4 3/4!!!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! AWESOME 4 3/4 INCH TALLAHATTA QUARTZITE BLADE! IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO ASK AND THANKS FOR LOOKING! COMBINED SHIPPING AVAILABLE!
|
|
|
Tourstage X-Blade iron set / 3-PW / RH / NSPRO 950GH Stiff / VGC !!
Tourstage X-Blade iron set. 3i-PW(8 irons total) Right handed. NSPRO 950GH stiff flex shafts. This rare iron set is in very good condition with just some light bag chatter and very light surface marks from no more than 1 seasons use.
|
|
|
3 5/8" Missouri Blade / Arrowhead
3 5/8" Missouri Blade/ Arrowhead Description: Here is a blade from Missouri that measures 3 5/8" in length. It is made of Burlington chert and shows heavy iron. Deposit, and patination throughout. I just had an unexpected surgery on my right ankle and am in a cast. And it may delay me being able to get things out quite as quick as normal since I am unable to stand on it or drive, but there should not be any lengthy delays at all, and still expect under most circumstances to be able to get things out quickly and in my normal time frame. Please feel free to combine multiple auctions for up to two weeks to save on shipping charges as long as a single payment is made for all purchases. If you plan to try an add more items to a purchase for one shipment. Please just let me know so I am aware of it. I will always work with someone as ... moremuch as I can for payment arrangements, so if more time may be needed, just contact me through an eBay message to see what we can work out. For multiple purchases please wait for me to send an accurate invoice, as the auto calculations sometimes may not be accurate due to weight. At times it may actually cost less than what it calculates when several items are purchased or if there are heavier items, and I do not intend to make any money off of shipping. As always. There is No Reserve. Check out my other auctions for more items. We are members of the following: AACA/ CSAS/ GIRS Payment: Please make payments through PayPal. Payments are expected within 2 weeks of an items end. If someone wishes to wait for other items to end and try to combine more items together in one shipment. That is perfectly fine. Please just communicate that to me so I am aware of it. Please do not let more than a two week(14 day) period go by without making payment unless other arrangements are made with me in advance. If combining items in one shipment to save on shipping, please ensure one payment is also made for all the items and not individually. If individual payments are made, then I must ship them
|
|
|
Ping I3 Blade 2 Iron Blue Dot Excellent Eye 3 Club Head Only
Ping I3 Blade 2 Iron Blue Dot Excellent Eye 3 Club Head Only
|
|
|
KOMURA SANKYO KOHKI Lens 3.5 135mm M42 Screw Mount (Pentax) 16 blade Iris
This is a 135mm 3.5 lens with it's original hood and case. Pretty rare to find and extremely sharp lens. Optically- there's no fungus. Haze and deep scratches, there are however few cleaning marks visible under strong light on the front element. mechanically- excellent. Freshly regreased focusing ring is buttery smooth and the aperture rings are snappy and smooth cosmetically- very good. Some paint rubbed out from the edges but no dings. Comes with a case. Hood and rear cap. Shipping to us is 10, international first class mail is 20 $ f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f918068a1-0x100-
|
|
|
DELL Blade PowerEdge 1855 2x Xeon 3,2Ghz/4GB/146GB
in Artikelbezeichnung und Beschreibung. DELL Blade PowerEdge 1855 2x Xeon 3.2Ghz/4GB/146GB. 10002025. Artikelbeschreibung. TECHNISCHE DATEN. Technische Spezifiaktionen, Model, PowerEdge 1855, Type, PowerEdge 1855, Anzahl der CPUs, 2, Anzahl der CPU-Steckplätze, 2, Prozessor, Intel Xeon, Prozessortyp, Xeon DP, Prozessortakt(MHz) 3200, Front Side Bus- FSB(MHz) 800, Anzahl der Kerne pro CPU, 1, Arbeitsspeicher(GB) 4, Speichertyp, DDR2-RAM, Festplattentyp, SCSI, Grafikkarte, onBoard, Sound, nein, Festplatten, 72 GB SCSI, 2, Gesamtkapazität(GB) 146, max. Festplatten, 2, PCI-Devices onboard, Brocadcom NetXtreme Gigabit Ethernet, 2, DELL RAID-Controller PERC 4, 1, Erweiterungssteckplätze, I/O Mezzanine Slot, 1, RAID, RAID, ja, RAID-Level, 1, Hinweis, Nur zur Verwendung mit einem Blade Enclosure, ja, KOMPATIBILITÄTEN. ZUSTAND. ... moreEs handelt sich um Gebrauchtware. Welche von unserem Technikerteam getestet wurde. Sie ist technisch und optisch in einem einwandfreien Zustand. KORRESPONDIERENDE P/Ns. PowerEdge 1855. LIEFERUMFANG. Blade Server wie beschrieben ohne Handbuch ohne Software/ Treiber. Versandkosten. UPS Standard 0.00 €, 9.95 €, 24.95 € 9.95 €, 24.95 € 9.95 €, 9.95 €, 24.95 €, 24.95 €, 14.95 €, 24.95 €, 24.95 €, 9.95 €, 9.95 €, 29.95 €, 9.95 €, 14.95 €, 24.95 € 24.95 €, 9.95 € 29.95 €, 14.95 €, 14.95 €, 24.95 €, 9.95 €, 24.95 €, 9.95 € UPS Express 24.95 €, 58.00 €, 129.00 € 58.00 €, 129.00 € 96.00 €, 88.00 €, 96.00 €, 96.00 €, 88.00 €, 129.00 €, 129.00 €, 58.00 €, 58.00 €, 88.00 €, 58.00 €, 126.00 €, 96.00 € 129.00 €, 96.00 € 88.00 €, 126.00 €, 126.00 €, 96.00 €, 129.00 €, 129.00 €, 88.00 € item discription DELL Blade PowerEdge 1855 2x Xeon 3.2Ghz/4GB/146GB. 10002025. ITEM DESCRIPTION. SPECIFICATIONS. Technische Spezifiaktionen, Model, PowerEdge 1855, Type, PowerEdge 1855, Anzahl der CPUs, 2, Anzahl der CPU-Steckplätze, 2, Prozessor, Intel Xeon, Prozessortyp, Xeon DP, Prozessortakt(MHz) 3200, Front Side Bus- FSB(MHz) 800, Anzahl der Kerne pro CPU, 1, Arbeitsspeicher(GB) 4, Speichertyp, DDR2-RAM
|
|
|
DELL IDAC SCALAR I500 ML6000 WJ129 3-01989-11 2-00216-05 LIBRARY CONTROL BLADE
DELL IDAC SCALAR I500 ML6000 WJ129 3-01989-11 2-00216-05 LIBRARY CONTROL BLADE'Most items ship within 24 hours after confirmed payment is received! SearchBy30- 52155 | Location: Z15 | Lister: Andy | Tester: Andy | Tech: | Quan: 1 | List: 1 | Duplicate: False | Plan: Q2 2 pound w/Free Shipping | Amazon: Size: 0x0x0 Weight: 3 | Start: $149.99 | BIN: $0.00 | Type: Auction | $hippingBump: $10 | Date: 6/26/2013 | Condition: Used | CONSIGNOR VIDE O | RESEARCH LINK | Created: 6/26/2013 | Computers/Tablets& Networking Drives. Storage& Blank Media Blank Media& Accessories Tapes& Data Cartridges Photos are of THE ACTUAL item and all of the components for sale. CLICK HERE FOR ADDITIONAL PHOTOS PRODUCT DETAILS TESTING& FUNCTIONAL NOTES: This item was pulled from a working environment. The items for sale are Guaranteed Working! ... moreBid with confidence! REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot. It should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. COMPONENTS INCLUDED IN THIS AUCTION: 1- DELL IDAC SCALAR I500 ML6000 WJ129 3-01989-11 2-00216-05 LIBRARY CONTROL BLADE• 1- 256MB FLASH CARD Unless stated otherwise. Accessories such as Power Cords, Software, AC Adapters, and/or other Cables are not included. COSMETIC NOTES: This listing is for used item in acceptable cosmetic condition with scuffs and scratches associated with normal use. The items for sale are Guaranteed Working! Bid with confidence! Please refer to the product manufacturer for compatibility issues(e.g. we do not test computer peripherals with Windows 8) The Environmentally-Friendly packing materials that we purchase are more costly. We buy and salvage used packing material for Reuse because it's better than simple recycling. We buy Carbon Offsets to mitigate the environmental im
|
|
|
AWESOME!! INDIAN ARTIFACT COLLECTION!! 4 3/4 THIN BLADE!!!
HERE IS A NICE COLLECTION OF ARTIFACTS FROM WI. TN, TX& AL. THE BLADE WITH THE STRIPE AT THE BASE OF IT WAS FOUND IN TX& MEASURES IN AT 4 3/4 INCHES IN LENGTH& IT IS ALSO BEVELED ON ONE SIDE. THE SECOND BIG BLADE WAS FOUND HERE IN TN AND MEASURES 4 1/2. THE GREY BLADE MEASURES 3 INCHES IN LENGTH, TN. THE UNI-FACE BLADE/SCRAPER MEASURES 3 1/2 INCHES, TN. THE THREE SMALLER QUARTZ/QUARTZITE POINTS MEASURE 1 1/2 EACH, TN. THE QUARTZITE POINT MIGHT BE A DALTON, AL. THE NICE SQUARE ADZE MEASURES 2 3/4 INCHES IN LENGTH& 1 3/4 INCHES IN WIDTH& IS SEMI UNI-FACIAL, TN. THE BIGGER ADZE IS 3 3/4 INCHES, TN. THE SLATE CHISEL MEASURES 3 3/4 INCHES, TN. THE TWO SLATE CELTS WERE FOUND IN TN& HAVE A LOT OF RIVER WEAR, THE LONGEST MEASURES 8 1/2& THE SHORTEST 6 INCHES IN LENGTH. A COUPLE GRINDING/PECKING STONES, OLD BEAT UP NET ... moreWEIGHT, A COUPLE BROKEN SLATE TOOLS ALL TN. THE POTTERY SHARDS SOUTH DAKOTA. ARIKARA/MANDAN 600-800 YEARS OLD.FOUND ON A LARGE VILLAGE SITE, EXCAVATED BY UW, WISCONSIN BELOIT 1938. NEARVERMILION RIVER. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE OT ASK AND THANKS FOR LOOKING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13f92f1e837-0xe4-
|
|
|
HORNSTONE CACHE BLADE 3 1/4" KENTUCKY Indian Artifacts
Here's a Bullseye Hornstone 3 1/4" CACHE BLADE found in McLean Co in western KENTUCKY. Width 1 3/4" and thickness 1/4" Thin and well made. The bullseye fills both sides. FREE U.S. SHIPPING THANKS FOR LOOKING! Powered by The free listing tool. List your items fast and easy and manage your active items. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f934540be-0xf9-
|
|
|
YMZ BT 50 TAPER BT50-EMA 7/8-3.75 + 8" x 3/8" CUTTING BLADE
YMZ BT 50 TAPER BT50-EMA 7/8-3.75 + 8" x 3/8" CUTTING BLADE Click Images to Enlarge YMZ BT 50 TAPER BT50-EMA 7/8-3.75 + 8" x 3/8" CUTTING BLADE COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 20 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing ... moreA $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater sele
|
|
|
2 3/4" %100 AUTHENTIC HARDIN KNIFE/ SPEAR/ ARROWHEAD/ POINT/ BLADE/ ARTIFACT !!
OFFERING FOR YOUR BIDDING PLEASURE} 2 3/4" HARDIN BARB KNIFE. PURCHASED AT AUCTION IN PIKE CO. ILLINOIS. NO INFO WAS GIVEN. IT IS%100 AUTHENTIC. GUARANTEED! WILL BE LISTING A COUPLE HUNDRED POINTS IN THE COMING DAYS. CONDITION: SEE PHOTO. SOLD IN AS FOUND CONDITION. ALL CLEANING AND OR RESTORATION ETC.IS THE SOLE RESPONSIBILITY OF NEW OWNER. IF YOU ARE SATISFIED WITH YOUR PURCHASE. PLEASE TAKE TIME TO FILL OUT THE 5 STAR SECTION OF YOUR FEEDBACK, AS MY GOAL IS TO BE A 5 STAR SELLER. IF NOT SATISFIED PLEASE CONTACT ME. I WILL TRY TO RESOLVE ANY PROBLEM.PLEASE KEEP IN MIND THAT I HAVE NO CONTROL OVER USPS, UPS OR FEDEX SHIPPING CHARGES. I CHARGE NO HANDLING FEE, EVEN THOUGH I INCUR EXPENSES SUCH AS, BUBBLE WRAP,SHIPPING ENVELOPES,SHIPPING PEANUTS, AND OTHER PACKING MATERIALS, BOXES, TAPE ETC.NOT TO MENTION THE TIME SPENT CAREFULLY PREPARING ... moreYOUR ITEM FOR SHIPMENT. NONE OF THESE EXPENSES ARE PASSED ON TO THE CUSTOMER.
|
|
|
Mercury 3 Blade Stainless Steel Turbo Prop 13 1/4 X 17pitch
Like new condition with no dings. Scratches, marks etc. bought new and had on boat for about two hours. Wasn't the right pitch for my boat so on the shelf it sat. Will work on any 15 spline mercury 65-150 hp.
|
|
|
ESKIMO BOX FAN RARE PUSH BUTTON 2 SPEED 3 BLADE 21" X 21" X 6" WORKS model 20137
ESKIMO RARE BOX FAN PUSH BUTTON 2 SPEED 3 BLADE 21" X 21" X 6" WORKS model 20139 MCGRAW-EDISON This fan is good condition. It still has the tag on it. It is used and i have not cleaned it, i want you to see the kind of shape it's in without being all doctored up for the photo's There is alittle su rface rust on the screen part of the fan and maybe just alittle bit on the bottum of the inside. Most of what you see on the bottum is little clumps of dust/dirt. This is a go od old fan that is sol id and has many of years left in it. Look at the pictures as this is what your getting.thanks for looking and good luck Please ask any questions you may have. On Jun-29-13 at 19:28:32 PDT. Seller added the following information:
|
|
|
Playstation 3 15-Blade Fan CECHA, CECHB, CECHC, CECHE, CHCHG
This is an original 15-Blade fan for the original(fat) Playstation 3 models. Please feel free to ask any questions! Thanks!
|
|
|
3/8" Diameter Slitting Saw Arbor w/ 1-1/4" Diameter Blade
This is a slitting saw arbor with a slitting saw blade. Arbor diameter: 3/8" Saw blade diameter: 1-1/4" Arbor length: 2-1/2" We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder ... morewithin 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact: Gil Freight Quote at 888-595-6298 x1250. Contact: Bob All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Fine Print: Winning bidder assumes all risks and liabilities with respect to each item purchased. Each item is sold“as is” in used condition with no express o
|
|
|
BUCK POCKET KNIFE 319 ( U.S.A ) MADE 3 BLADE
THIS BUCK POCKET KNIFE IS IN GREAT USED CONDITION AS YOU CAN TELL FROM PICKS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f97156121-0x107-
|
|
|
DELL ML6000 LCB 0WJ129 (library control blade) 3-01989-10
This is a working LCB for the DELL ML6000 tape loaders(ML6010. ML6020, ML6030) 1GB compact flash card. Firmware level is the latest from DELL 630G.GS003. Supports drives LTO-1 through LTO-6. Factory default settings.
|
|
|
Mint WW2 Navy Pal RH-36 Bright Blade Stacked Leather Handle 10 3/4" OA Excellent
Knife is in Mint unused or sharpened condition. The 6" long bright blade has no scratches or pitting. And has all its original finish and grind marks. The 4 3/4" long stacked leather handle is in perfect shape with no dings or scuffs on it. The steel full guard and the pommel along with the handle are all tight with no movement. The leather sheath is in great shape not dried out with all its stitches and good snap on the keeper. Very nice example of the Navy Pal RH-36 from WW2. If you have any questions or comments please drop me a line, and ill answer you as soon as I can. Thank you for your time, and good luck with the auction.
|
|
|
Fan Blade Metal 18-3/4"
Shaft hole 1/2" Check our other auctions for liquidation items. Brand new items, and good quality used items. We offer refunds if item is not as we represented. No exchanges. Please bid accordingly and with knowledge! We will not offer refunds on items for any reason. Other than misrepresentation. Original shipping charges are not refundable. Buyer pays return shipping. Buyer must notify me within 7 days to receive authorization to return an item. Please read the description carefully before you bid and ask questions! Payment is expected within 7 days. Paypal preferred. US currency only. I will not sell items that I would not be happy with as a buyer! Feel free to email me with questions and check out my feedback.
|
|
|
Oceanic Stainless Knife. Blade 3.25" Total Length 5"
For auction is 1 Oceanic Stainless Knife. Blade 3.25" Total Length 5" This unit is in used condition. As with all used scuba life support equipment this should be serviced by a qualified technician before use. I have 1 day handling on the shipping to appease e-bay and get their selling discount. On rare occasion I get called out of town and it may not ship the next day. If that happens I will make sure to communicate when to expect it to ship. Shipping to US addresses outside the 50 states may incur additional shipping charges. If you are not a certified diver you should not bid on this item. Posted with
|
|
|
Nicely Made 3 1/4" Missouri Blade / Arrowhead
Nicely Made 3 1/4" Missouri Blade/ Arrowhead Description: Here is a nicely made point from Missouri that measures 3 1/4" in length. Nicely made point showing good edge work with some nice deep flaking. Point is made from heat treated Burlington chert where the material now has a pink hue to it. Piece is well patinated with a lot of deposit. Especially on one side where there is a lot of deposit on it. Piece does has two small spots of glue residue left on the piece from when it was previously glued to some felt on a board and I have never bothered removing it, as it just didn't matter much to me and is more insignificant. Nice well made point or blade with good overall quality workmanship and flaking. As always. There is No Reserve on my auctions and a low starting bid. Shipping is a low flat rate within the Continental United ... moreStates for most items. Add more items to your package for just.50 extra per item in the Continental United States and save on shipping. Combine multiple purchases for up to two weeks. If more time is desired to add more items. Or extra time may be needed for payment, please do not hesitate to let me know as I will work with you all that I can. I did just have an unexpected surgery on my right ankle for some things torn and am casted. And am unable to put weight on it or drive for over a month. There is the chance of there being minor delays in shipping due to this depending on when I can get to the post office, but normally under most circumstances I expect things to fall in my normal time frames as posted, but just wanted to give an FYI just in case so everyone is informed beforehand. Check out my other auctions for more items. We are members of the following: AACA/ CSAS/ GIRS Payment: Please make payments through PayPal. Payments are expected within 2 weeks of an items end. If someone wishes to wait for other items to end and try to combine more items together in one shipment. That is perfectly fine. Please just communicate that to me so I am aware of it. Please do not let m
|
|
|
Lot of 3 General Operating HOLCO Germany Sauerbruch Retractors 2-7/8" blade 3/4"
| | Lot of 3 General Operating HOLCO Germany Sauerbruch Retractors 2-7/8" blade 3/4" Click to View Image Album Click to View Image Album NSN: 6515-00-360-9750. Marked: HOLCO. Germany. 2-3/4" Blade Length. 3/4" Blade Width. Pictures are of the actual 3 retractors that you will receive. Free shipping via USPS 1st Class Mail. Shipping via USPS Priority Mail is 2.50. Payment, I accept the following forms of payment: PayPal Shipping& Handling, FREE) USPS First-Class Mail® $2.50 USPS Priority Mail® Additional Information, FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Vintage General Operating SKLAR Sauerbruch Retractor 2-7/8" blade by 3/4" width
| | Vintage General Operating SKLAR Sauerbruch Retractor 2-7/8" blade by 3/4" width, Click to View Image Album Click to View Image Album Click to View Image Album NSN: 6515-00-360-9750. The retractor is marked SKLAR. Stainless. 2-3/4" Blade Length. 3/4" Blade Width. Military purchased the retractor in 1975 and it has been in storage ever since then. Free shipping via USPS 1st Class Mail. Shipping via USPS Priority Mail is 2.50. Payment, I accept the following forms of payment: PayPal Shipping& Handling, FREE) USPS First-Class Mail® $2.50 USPS Priority Mail® Additional Information, FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Lot of 2 General Operating Sauerbruch Retractors 2-7/8" blade by 3/4" width
| | Lot of 2 General Operating Sauerbruch Retractors 2-7/8" blade by 3/4" width, Click to View Image Album Click to View Image Album NSN: 6515-00-360-9750. There are no markings on the retractors to indicate the manufacturer. 2-7/8" Blade Length. 3/4" Blade Width. Pictures are of the actual 2 retractors that you will receive. Free shipping via USPS 1st Class Mail. Shipping via USPS Priority Mail is 2.50. Payment, I accept the following forms of payment: PayPal Shipping& Handling, FREE) USPS First-Class Mail® $2.50 USPS Priority Mail® Additional Information, FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Vintage small Master Mechanic MM108 USA 3 blade folding pocket knife
Up for auction is a Vintage Master Mechanic 3 blade small folding pocket knife(MM 108) Made in USA. The knife is used and is in fair condition with excessive wear. I am listing more knives from our personal collection this week. So be sure to check our other auctions. We are starting them all out at.99 with no reserve! We will combine shipping. We accept paypal only. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f9d92cba9-0xfe-
|
|
|
HP ProLiant BL20p G3 Dual Xeon 3.2GHz/72GB HDD Server Blade 347956-B21 NO RAM
Search our eBay Store! HP ProLiant BL20p G3 Dual Xeon 3.2GHz/72GB HDD Server Blade 347956-B21 NO RAM SKU: JV-THE-A-ARTKRTRY5E Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 HP ProLiant BL20p G3 Dual Xeon 3.2GHz/72GB HDD Server Blade 347956-B21*FOR PARTS&OR REPAIR* PLEASE NOTE: UNIT DOES NOT INCLUDE ANY RAM. PLEASE NOTE: UNIT INCLUDES ONLY ONE HARD DRIVE. Model: BL20p G3. Listing Includes: 1x HP ProLiant BL20p G3 Server Blade 347956-B21 with Main Board 1x HP BD07285A25 72.8GB/10000 RPM/Wide Ultra320 SCSI 2x Intel Xeon SL7PF 3.2GHz/1MB/800MHz/64-Bit Physical ... moreCondition: Good- Scuffs/scratches and other cosmetic signs of damage. Front plastic panel is loose on left side. The inner left hard drive bracket is bent; hard drive is extremely tough to insert. The pins on one of the back connector is bent and its housing has broken off. Push-able button. LED lights, micro ports, hard drive is in good condition with no major signs of damage. Internal components of the server blades show no noticeable signs of damage. Functionality/Degree of Testing: Unit is untested and assumed to be in working condition. We do not have the necessary resources to test this unit. Power cable adapter is not included. Dimensions(L" x W" x H" 28 x 10 3/8 x 1 7/8 BEING SOLD AS-IS FOR PARTS OR REPAIR. THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the
|
|
|
PING i3+ BLADE RED DOT IRONS 3-PW GOLF SET +0.50" CS LITE STEEL STIFF
PING i3+ RED DOT RIGHT-HANDED GRAPHITE SHAFT 3-PW IRON SET We Sell Top Quality Merchandise. We make it available to have the Name Brand Merchandise that you have always wanted! If you have been looking for a Ping Irons. This auction is for you! Product Features: Brand: Ping Model: Ping i3+ Red Dot Condition: Used in good condition with normal wear and bag chatter. Previous owners name is stamped on the flange throughout the set.Please see photos Dexterity: Men's Right-Handed Makeup: 3-PW Shaft: CS Lite No Cushin Steel.Shaft bands have been removed Flex: Stiff Grips: Ping in good condition Length: +0.50"7-Iron.37.5" Lie: Red Dot 553070 Progressively offset faces from the short to long irons assist squaring at impact for increased accuracy• Modified leading edge glides through the turf and contacts the ball more consistently• ... moreLarger Custom Tuning Port(CTP) than the i3 for maximum perimeter weighting International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. SAME OR NEXT DAY SHIPPING! GOOD LUCK BIDDING! PLEASE VISIT OUR STORE. THE BACK ROOM II" YOU NEVER KNOW WHAT YOU MAY SEE! PAYMENT IS EXPECTED WITHIN 5 DAYS OF PURCHASE. PAYPAL ACCEPTED. SHIPPING IN THE U.S. ONLY VIA USPS WITH DELIVERY CONFIRMATION. WE SHIP TO ADDRESS LISTED IN PAYPAL UNLESS NOTIFIED OTHERWISE. PURCHASING MULTIPLE ITEM. PLEASE EMAIL ANY QUESTIONS PRIOR TO BIDDING. WE STRIVE TO MAKE OUR CUSTOMERS HAPPY.IF THERE IS A PROBLEM PLEASE LET US KNOW AND WE WILL WORK WITH YOU TO RESOLVE IT. W E TRULY APPRECIATE YOUR BUSINESS
|
|
|
Tourstage Bridgestone X-Blade Gr Forged Irons 3-Pw "Mint"
You are looking at a"MINT" set of Tourstage Bridgestone X-Blade GR irons in 3- PW. I have has the for 6 months as a backup set. When I originally bought them. I had Golf Pride V-55 Full Cord Grips, but switched the 5-PW to Multi Compound. I have Tourstage iron covers for every iron that I will include. The best part, is they are in the US, boxes and ready to ship. Look at the other sets that are out of the country and the shape. My are by far better quality and aren't listed for over a grand in 5- PW. The auction starts low. Please look at the pictures, my feedback and rating on all items sold. You won't be disappointed. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f9f411485-0xf7-
|
|
|
U.S.A!! 3 ARMSTRONG QUICK CHANGE (BORING BAR & CUT-OFF BLADE) TOOL HOLDERS
aims U.S.A! 3 ARMSTRONG QUICK CHANGE(BORING BAR& CUT-OFF BLADE) TOOL HOLDERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Armstrong. These are 3 Quick Change Tool Holders in good condition. Lot consists of 2 Cut-Off Blade Holders& 1 Boring Bar Holder. Model#s: 9. 21& 31L Specifications: Capacities: 725" Cut-Off Blade) 750" Cut-Off Blade) 3/4" Boring Bar) Shanks: 425" x 1.065" 489" x 1.135" 525" x 1.125" Overall Lengths: 2) 6" 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! ... moreBidding starts at a dollar with no reserve. U.S.A! 3 ARMSTRONG QUICK CHANGE(BORING BAR& CUT-OFF BLADE) TOOL HOLDERS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Comair Rotron MU2B1 Muffin Vent Fan 4-1/4 In 3 Blade 115V 14W Used
Mara Industrial Supply ID: 64069-66701 PN: MU2B1 Muffin Vent Fan 4-1/4" 3 Blade 115V 14W 50/60Hz Plastic Housing: 4-11/16" x 4-11/16" x 1-1/2" Obsolete FREE SHIPPING DISCLAIMER: In order to offer Free Shipping. As well as faster delivery options, eBay's technical requirements force us to select a carrier. We reserve the right to change carriers in order to get the best price and options(Applies to free shipping only, if you select another option we will ship with that option! If you have trouble receiving packages from a particular carrier due to location or some other circumstance, please notify us in your order note. For questions. Alternate payment or shipping methods Call: 1.810.387.0562, Mon-Fri: 9AM to 5PM EST
|
|
|
Leitz No.58062 Carbide Tips Saw blade 450 x 3.8/2.8 x 80mm, 68T
For sales is 1 pcs excellent working condition Leitz No.58062 Carbide Tips Saw blade. Size: 450mm x 4.4/3.0 x 80mm. 68T Welcomed to ebay shop- toolingstation. Combined postage provided.
|
|
|
C10 Slicing blade 1 Knife 3/8” Electrolux/Dito Dean Processors TRS Series GOOD
INSURANCE& DELIVERY CONFIRMATION INCLUDED! TERMS& DESCRIPTION I can USUALLY ship the same day if payment is made M-F by 12 NOON CST but if I can't do same day. I will ALWAYS ship by the next business day. Buy with confidence. EBay member since 1997. C10 Slicing blade 1 Knife 3/8” Electrolux/Dito Dean Processors TRS Series GOOD The included pictures are an important part of this listing. Please use them to verify the description. These retail NEW for $241 each. I found information on them from Electroluxusa.com website under Electrolux TRS Series Vegetable Cutter Blades professional.electroluxusa.com/files/USA/ElectroluxPriceList2012dynprepweb.pdf C10 $241 Slicing blades 3/8” 1 knife blade) 10 mm) The blade has some nicks. This has signs of usage but is in GOOD condition overall. It needs to be cleaned and the blade may need to ... morebe replaced but the plate has many years of use left. I WANT TO SELL THIS ITEM! Go ahead and send me your best offers but I can't accept or respond to unreasonable offers. I research what others are selling similar items for to get an idea of what my items might be worth. If you've done YOUR research then you know I've listed this item at a fair price. Asking for a 40-50% discount from the listed price is not reasonable. But. If you want to send a low offer anyway, here's my reply so you don't have wait around for it. Thanks but I can't sell at that price. eBay can AUTOMATICALLY combine shipping on almost every item you purchase from me without you having to email or wait for a combined shipping invoice! Just click the blue Add to Cart button at the top of this page. Continue shopping, then checkout when you are finished. Most of my items are from Auctions. Estate Sales or Storage Auctions. I'm not an expert or dealer, any information I have listed is what I can find online and in some cases my opinion. If your own research shows that I have mistakenly described this item, please let me know PRIOR to purchase. Don't miss a sale! Be the first to fi
|
|
|
Egenera Switch Blade 3 4x Xeon 2GHz/2GB BladeFrame sBlade 2U 950-000037
Search our eBay Store! Egenera Switch Blade 3 4x Xeon 2GHz/2GB BladeFrame sBlade 2U 950-000037 SKU: JV-JIM-B-SBLADEGEN Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Egenera Switch Blade 3 4x Xeon 2GHz/2GB BladeFrame sBlade 2U 950-000037 P/N: 950-000037 Physical Condition: Good; some scratches and scuffs on case. Unit powers on. Front indicator light flashes orange. Exhaust fans appear to operate normally. We do not have the necessary resources to further test this unit. Does not include any cables or adapters. Does not include any software or licensing. Dimensions(L"W"H" 27 1/4* ... more21 1/8* 3 1/2 THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the
|
|
|
19 x19 1 1/2 nibral 3 blade props used twice!!
19 x19 1 1/2 nibral 3 blade props used twice! These are basically brand new. I only used them for testing on a re-power project. They are 19x19 with a medium cup and a 1 1/2 shaft size Nibral. The brand is Federal They have zero dings or issues. I even have the print out from the prop shop after they were removed confirming size and condition. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fa2a7c40b-0x104-
|
|
|
LOT OF 2 SCHRADE OLD TIMER 340T 3 BLADE FOLDING POCKET KNIVES #4645
LOT OF 2 SCHRADE OLD TIMER 340T 3 BLADE FOLDING POCKET KNIVES PLEASE ZOOM PHOTOS FOR CONDITION
|
|
|
HP BLC3000 437502-B22 2x Xeon 3.0Ghz E5450 Quad Core 2x 146GB 4GB BL480C Blade
HP BLC3000 437502-B22 Single-Phase Enclosure W/4 Power Supplies and 6 Fans Shipping Can Be Via Freight Or Local Pickup Includes 2x HP 146GB 10K Hard Drives 375863-010 1x HP ProLiant BL480C Blade 2x Intel XEON 3.0Ghz E5450 Quad Core Processors 455274-101 4x 1GB Memory Sticks 398706-051 1x DVD-Rom CD-RW Drive 1x 10GB Ethernet 16-Port Pass-Thru 406738-001 6x Fans 451785-002 4x Power Supplies 438202-001 1x 4-Port Enc INTERLINK Module Board 441357-001 1x Rail Kit 4x Power Cords Payment must be made within 7 days after the close of the auction. Payment may be made via PayPal and all major credit cards including Visa. MasterCard, Discover and American Express We Ship UPS Ground Same Day as Payments Are Received Item must be returned within 30 Days upon receipt of item Will Exchange or Refund if Replacement is Not in Stock No returns on products ... moresold in"as is" condition. Any Questions Please Feel Free To Email Me Please Leave Positive Feedback Contact Me With Any Concerns or Problems We also buy what we sell: Cisco. Adtran, Avaya, Nortel, Toshiba, Comdial, Intertel, 3COM, Dell, HP Send me your lists for a quote Thanks For Looking Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Carbide 10" Solid Dado Blade 3/4" Wide Cutters #3
Carbide 10" Solid Dado Blade 3/4" Wide Cutters#3 Item: Carbide 10" Solid Dado Blade 3/4" Wide Cutters#3 Manufacturer: Unknown Description: Blade measures 10"x3/4" 1" bore Condition: In good used condition. As always if your not satisfied with your purchase contact me. Satisfaction is Very Important to us as is Detailed Seller Ratings I accept Pay-Pal and payment on local pick ups can be arranged. Please pay with-in 7 days of sent invoice. Local pick ups are encouraged on lager items. Packing slips are available upon request. I do ship World wide and I ship every business day including Saturdays. I do offer Combined shipping. I have provided a shipping calculator for your convenience. Feel free to contact us if you need assistance. We do appreciate any ones packing instructions for specialty items. All items ... moreare digitally weighed and placed in a larger container. Professional packing material is provided for their safe journey. Shipping is calculated by weight of packaged item, size of item and distance. Shipping labels are printed and a message is sent to provide you with a tracking number. I do offer 2 to 3 carriers if your interested in a different one contact us. Your item is usually shipped with in 24hrs of received payment. PLEASE ADVISE ME OF AN ADDRESS CHANGE IF THIS APPLIES TO YOU. INTERNATIONAL BUYERS: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. Please provide me with your telephone number to prevent any delays or lost shipments. A tracking number is provided for First Class Mail International. Please check with your customs for further details and fees. INSURANCE: Insurance claims are handled through your carrier. We will work diligently with you on this process. It does take time for the process. Be patient. Insurance covers the item you purchased and not th
|
|
|
VINTAGE ** H ** BROADHEAD 3 BLADE GLUE ON ( L6 )
VINTAGE BROADHEAD* h* GLUE ON
|
|
|
Vintage HYWINCO (3) 5" blade Bronze Nautical, Boat Propeller.
Vintage Hywinco Bronze Propeller 11" DIAMETER(3) 5" BLADE Marked by the maker"8- 33" 12H7DE82Z4962RH" Some minor chipping to the blade rims. Nice patina to the bronze. Great Nautical Decr Insurance is included in the shipping& Handling Fees. Everything gets insured. Returns: Please contact me asap. If you would like to return the item. It needs to be returned within 14 days, in the condition it was received for a refund. It is not my intention to mislead any buyer. I am not an expert in any particular field and I describe these items as best as I can with pictures and verbiage. Please ask questions and I will do my best to give you a answer.
|
|
|
3COM 122-01700-010 LMM +3 MAC Blade - Blade only!
3COM 122-01700-010 LMM +3 MAC Blade- Blade only! Dear customer. When there might be a difference between the automatic generated specifications by the Ebay system. And the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description. Specifications above might be slightly different. Thanks for your understanding. 3COM 122-01700-010 LMM +3 MAC Blade- Blade only! Ports: 2x Serial ports 1x Ethernet 3A 1x Opt BYP. A/M B/M If something is not on the picture it's no t included unless stated otherwise. Erstellt durch Das kostenlose Einstell-Tool. Stellen Sie Ihre Artikel schnell und bequem ein und verwalten Sie Ihre aktiven Angebote.
|
|
|
Vintage Farmland Grain Advertising 3-Blade Pocket Knife Multi Purpose Tool
This is a Vintage Farmland Grain Advertising 3-Blade Pocket Knife Multi Purpose Tool. It measures 2-1/4" when closed and 3-7/8" when fully extended. Please see pictures for details. Please visit our store for additional items. New merchandise is added regularly. So be sure to check back often and subscribe to our newsletter for monthly updates! AUCTION TERMS: Description- Please read and understand. If you do not understand. Please ask questions for clarification. Picture(s) The actual item that you will receive. If something is not in the picture then it’s not included. Condition- All items are sold"AS IS" Items are purchased from estates to be resold. Questions– Please ask before auction ending. Do not make assumptions. Bidding– You bid. You win, you are expected to pay for your item. Payment– Full payment due within ... moreThree(3) days after auction end date via Pay Pal. The faster you pay. The faster you will receive your item(s) Shipping– Shipping costs are not negotiable and are not refundable. No international shipping. Multiple Items– I will combine shipping and send a revised invoice with updated shipping charges. Shipping handling time– Within three(3) business days following payment. Again. The faster you pay, the faster you will receive your item. Large/Heavy items– Are expensive to ship due to size/weight. Issues/Problems– Please contact seller prior to leaving any feedback. Feedback– I leave feedback for all buyers only after I have received my feedback. Liability– Seller assumes no past. Present or future liability for any item sold. No product support– Know exactly what you are buying. The application and how to use the item as intended by the original manufacturer. Partial refunds– No discounting as this is unfair to other bidders that were bidding on the item. Warranty– New old stock(NOS) Used, antique, vintage, and"as is" items do not have a warranty. Returns– Returns accepted if I am notified within 14-days of you receiving your item. Buyer pays both the initial shippin
|
|
|
3 1/2 " AUTENTIC GIBSON/ KNIFE BLADE/ POINT/ ARROWHEAD/ TOOL/ ARTIFACT!
OFFERING FOR YOUR BIDDING PLEASURE} GIBSON POINT. FROM AN AUCTION IN PIKE CO. IL. CONDITION: SEE PHOTO. SOLD IN AS FOUND CONDITION. ALL CLEANING AND OR RESTORATION ETC.IS THE SOLE RESPONSIBILITY OF NEW OWNER. IF YOU ARE SATISFIED WITH YOUR PURCHASE. PLEASE TAKE TIME TO FILL OUT THE 5 STAR SECTION OF YOUR FEEDBACK, AS MY GOAL IS TO BE A 5 STAR SELLER. IF NOT SATISFIED PLEASE CONTACT ME. I WILL TRY TO RESOLVE ANY PROBLEM.PLEASE KEEP IN MIND THAT I HAVE NO CONTROL OVER USPS, UPS OR FEDEX SHIPPING CHARGES. I CHARGE NO HANDLING FEE, EVEN THOUGH I INCUR EXPENSES SUCH AS, BUBBLE WRAP,SHIPPING ENVELOPES,SHIPPING PEANUTS, AND OTHER PACKING MATERIALS, BOXES, TAPE ETC.NOT TO MENTION THE TIME SPENT CAREFULLY PREPARING YOUR ITEM FOR SHIPMENT. NONE OF THESE EXPENSES ARE PASSED ON TO THE CUSTOMER.
|
|
|
2 3/4 " AUTENTIC SMITH/ KNIFE BLADE/ POINT/ ARROWHEAD/ TOOL/ ARTIFACT!
OFFERING FOR YOUR BIDDING PLEASURE} SMITH POINT. FROM AN AUCTION IN PIKE CO. IL. CONDITION: SEE PHOTO. SOLD IN AS FOUND CONDITION. ALL CLEANING AND OR RESTORATION ETC.IS THE SOLE RESPONSIBILITY OF NEW OWNER. IF YOU ARE SATISFIED WITH YOUR PURCHASE. PLEASE TAKE TIME TO FILL OUT THE 5 STAR SECTION OF YOUR FEEDBACK, AS MY GOAL IS TO BE A 5 STAR SELLER. IF NOT SATISFIED PLEASE CONTACT ME. I WILL TRY TO RESOLVE ANY PROBLEM.PLEASE KEEP IN MIND THAT I HAVE NO CONTROL OVER USPS, UPS OR FEDEX SHIPPING CHARGES. I CHARGE NO HANDLING FEE, EVEN THOUGH I INCUR EXPENSES SUCH AS, BUBBLE WRAP,SHIPPING ENVELOPES,SHIPPING PEANUTS, AND OTHER PACKING MATERIALS, BOXES, TAPE ETC.NOT TO MENTION THE TIME SPENT CAREFULLY PREPARING YOUR ITEM FOR SHIPMENT. NONE OF THESE EXPENSES ARE PASSED ON TO THE CUSTOMER.
|
|
|
2 Vintage PFLEUGER "SCAMPER" #1 3 1/4" BLADES/1 WILLIAMS "WARBLER"44"BLADE
VINTAGE PFLEUGER"SCAMPER"2 LURES 3 1/4" GOLD BLADES/ONE HAS A FEW WATER STAINS. FAIR CONDITION. THE OTHER IS IN GOOD CONDITION. NO OUTSTANDING FLAWS TO NOTE) THE WILLIAMS"WARBLER" PATENTED 4" GOLD BLADE. RIB DOWN THE CENTER IS RAISED ON THE TOP, INDENTED ON THE BOTTOM, HAS SOME WATER STAINS. SHOWS WEAR. F AIR CONDITION. MADE IN USA
|
|
|
2 3/8" Archaic Leaf Blade, Colorful Alibates, Texas / New Mexico, x Crabtree
254-2010) Archaic Blade made of a purple. Maroon, red, yellow, white, pink, and orange colored Alibates. Measures approx 2 3/8" x 1 3/16" x 1/4" This specimen has highly controlled random percussion followed by perimeter edge pressure flaking resulting in a nice thin lenticular cross section. It appears that the basal area may have served double duty as use as a hide scraper while the blade edges have alternate left hand shallow angle bevels. Beautiful patina with a touch of creek or river polish and scattered mineral deposits. Quality is G7+. Finder and exact location is unknown, but likely Texas or New Mexico, x Roger Crabtree collection. Comes with a NWAC SOP.
|
|
|
Indian Artifact 3-1/2" Illinois Blade / tool
| | | And up for bids is a 3-3/8" Illinois Blade/ tool. Made from burlington chert. super thin. Good size and heavy patina. a nice artifact! Found in Pike county. Illinois. GUARANTEED AUTHENTIC ARTIFACT. AACA MEMBER. QUESTIONS? PLEASE ASK BEFORE BIDDING. Check out my to see more great deals! PLEASE ASK QUESTIONS BEFORE BIDDING. PAYMENT APPRECIATED WITHIN 6 DAYS OF AUCTION END DATE. SHIPPING is $3.50 and.50 for each additional item for UNITED STATES ONLY. To receive the shipping discount. All items must be paid for together in one transaction. I will combine shipping for 3 CONSECUTIVE DAYS. If the combined s hipping is not automatically calculated please request a total and I will send an invoice right away. PLEASE DELAY PAYMENT UNTIL YOU ARE COMPLETELY FINISHED BIDDING AND WANT YOUR ITEMS SHIPPED Delivery confirmation is included free ... moreof charge. Be sure to add me to your to see more point listings daily! N2 7-4
|
|
|
RESHARPENED WAUKESHA HSS SPADE BLADE DRILL INSERT 2-3/16" Series "D" 2.187"
LISTING IS FOR A RESHARPENED HSS SPADE BLADE DRILL INSERT BRAND- WAUKESHA SIZE- 2-3/16" SERIES"D" THICKNESS- 3750" LENGTH- 1.830" CONDITION- VERY GOOD USED SPADE BLADE HAS BEEN RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ... moreACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOT
|
|
|
Native American Indian Authentic Lerma Blade 3 3/8"x 1 5/8"
This Native American Indian Authentic"Lerma" Blade is made of Dover Chert and has a whole lot of mineral Deposits great flaking and some of the pictures show the lines in the flint. It is a rounded base great edges all the way around and it has no major chips just very complete blade with a lot of history to tell us I am going to set a great starting price on this blade for good opportunity to everybody. Posted with
|
|
|
Antique Pflueger Tandem Spinner Lure 3/0 Blade Fly Rod Sized Old Display Tackle
Antique Pflueger Tandem Spinner in a smaller fly rod/ UL size. Bait has marked blade. Nice collectible bait.good example for a collector. Actual item is in pics, so what you see is what you get. USA shipping and I combine shipping on my other items, Thank you for looking, and Good Luck Bidding! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13fad404376-0xff-
|
|
|
USED EMPIRE TOOL No.5 TAPERED STYLE HSS PARTING BLADE 3/16" x 7/8" x 5.25"
LISTING IS FOR A USED HSS PARTING BLADE BR AND- EMPIRE TOOL CO. No. 5 WIDTH- 3/16" HEIGHT- 875" OAL- 5.250" TAPER ED STYLE CONDI TION- GOOD USED MAY NEED RESHARPENED A FEW NICKS AND DINGS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. ... moreAS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER
|
|
|
Delta 56 1/8" X 3/8 " 6 TPI BAND SAW BLADE wood cutting
Delta 56 1/8" X 3/8" 6 TPI BAND SAW BLADE wood cutting
|
|
|
SAIT CONCRETE SAW BLADE 14" x 1/8" x 1", Type 1 - BF, BIG M.A.C., LOT OF 3
Sait Concrete saw blade 14" X 1/8" X 1" Big M.A.C. 23460 TYPE 1-BF LOT of 3. Big M.A.C. Very long life. Special silicon carbide grain. Superior cutting action. 40% longer life than general purpose concrete wheels. Masonry. Asphalt, Concrete. Specifications: Max RPM- 6300. Tech Info: External fiberglass reinforcement withstands offhand lateral pressure for added safety and controlled performance. Special silicon carbide grain formula provides excellent cutting action on masonry, concrete, stone and aggregate. Condition: These blades are preowned so do show some signs of wear. Please look over all photos and judge the condition. Thank you. If you have any questions please contact me thanks. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Roller Blade 3 pack Protective Gear Pads Knee Elbow Wrist SMALL
You are bidding on a lightly used RollerBlade Tri Pack Bladegear LX in size SMALL. It includes the carrying bag. The wrist pads, elbow pads, and knee pads all in EXCELLENT condition. My son got them for Christmas and used them with his rollerblades a couple times before moving on to skateboarding. As you can tell from my feedback I want everyone to be satisfied with what they get from me so please ask questions before bidding. I will answer in a timely manner and ship within 24 hours of receiving payment. I will be happy to combine shipping so please check out my other items for sale. Everything I sell is from a smoke free home. Thanks for looking.
|
|
|
HIBBS RETRACTOR - 3/4" blade width
ITEM DESCRIPTION. CONDITION and DISCLAIMER Codman HIBBS RETRACTOR. Model 50-2558 SPECIFICS INCLUDE- 9" 22.9cm) arm length- 3/4" 1.9cm) blade width- 2-1/8" 5.4cm) blade depth CONDITION- USED. Proper operation lmx DISCLAIMER- The purchaser agrees that the seller. Amdamom- DA Medical, shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with this item. Once the buyer purchases this equipment, it indicates one's acknowledgment of, and agreement to the terms of this disclaimer. PAYMENT We accept Paypal from verified locations and other certified forms of payment. DOMESTIC CONTINENTAL USA SHIPPING We use USPS for packages. FedEx insured, ground for large packages. Each ebay item has a custom weight. The ebay system will automatically calcluate shipment ... moreweight for multiple purchases. Use the Add to Cart icon to confirm shipping costs. INTERNATIONAL SHIPPING We use USPS Express Mail for international shipments. Each ebay item has a custom weight. The ebay system will automatically calcluate shipment weight for multiple purchases. Use the Add to Cart icon to confirm shipping costs for your specific country. FDA REGULATION AND CERTIFICATION The sale of this item may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. amdamom- DA Medical- amdamom- DA Medical- amdamom- DA Medical- amdamom- amdamom is the eBay seller name for DA Medical DA Medical has sold unused and surplus medical items since 1992. DA Medical is located at 14
|
|
|
Vintage Ram, Dave Hill, Tournament, Spade Blade Irons with 3 Wood Right Hand
Vintage Ram. Dave Hill, Tournament, Spade Blade Irons with 3 Wood Right Hand CONSIGNED ITEM USED Right Hand Swing Vintage Ram. Dave Hill, Tournament, Spade Blade Irons with 3 Wood This set of irons is not complete it has 5 irons to include 2.4,5,6 and 7 irons with Dave Hill 3 wood. They are standard lie and loft. Shaft on 5 iron measures 37" Shafts are True Temper Lightning action. Shafts and irons do show pithing and some rust spots. Grips are shot. 3 Wood goes with set and does show fair amount of grooving on bottom. Shaft ring on 3 wood is gone but I assume it is the same shaft as the rest. Shaft length is 41" Our goal is your complete satisfaction. If there is a problem it will be resolved to your satisfaction. All of our listings are genuine and authentic. Your Items 2 Cash Shipping. All items ship with insurance included in ... moreshipping price. If purchasing multiple items please request a combined shipping invoice before making payment. We ship to U.S.A. Only. We do combine shipping costs for multiple sales within a four day period from purchase of first sale unless otherwise stated in description of auction. Combined shipping on 4 days only. No exceptions please. Shipping Rates Shipping rates are as follows: Highest shipping cost of multiple items purchased. Then add $3.00 for each additional item purchased. All sales shipped to the state of South Carolina are subject to a 7% sales tax. Another auction from Your Items 2 Cash Powered by
|
|
|
LARGE 5 3/4'' MISSOURI BURLINGTON DICKSON BLADE ARROWHEAD
TYPE: DICKSON MATERIAL: BURLINGTON CHERT SIZE: 5 3/4' LONG BY 1 5/8' WIDE REGION OF ORIGIN: MISSOURI DESCRIPTION: THIS IS A HIGHLY COLLECTABLE DICKSON BLADE. THIS BLADE SHOWS OUTSTANDING OVERALL WORKMANSHIP. SUPERB FLAKING. SHOWS RESHARPENING ALONG THE BLADE EDGES, AND VERY THIN FOR THE LENGTH. MADE OF HEAT TREATED BURLINGTON CHERT. SHOWS SIGNS OF WEAR FROM USE AND TIME, WITH PATINA CONSISTENT WITH BEING EXSPOSED FOR VERY LONG PERIODS OF TIME TO WATER, SOIL,AND MINERALS. I WILL BE SELLING A LARGE GROUP OF POINTS THIS WEEK AND THE WEEKS TO COME FOR A FRIEND WHO HAS OVER THE YEARS PUT A LARGE COLLECTION TOGETHER. MAINLY BUYING THEM AT SHOWS, AUCTIONS, FLEA MARKETS,AND EBAY. ALL KNOWN HISTORY ON THESE POINTS IS LIMITED TO WHAT IS STATED ABOVE. I DID NOT FIND THESE POINTS MYSELF. TO FOREGO ANY DISPUTES OF AUTHENTICITY I AM LISTING ALL ... moreFLINT ITEMS IN THE NON-NATIVE AMERICAN ARTS AND CRAFTS CATAGORY. S/H IS $5.00. ALL ITEMS WILL BE MAILED FLAT RATE PRIORITY WITH TRACKING WITHIN ONE BUSINESS DAY OF OUR RECIEVING PAYMENT. WE DO COMBINE S/H ON MULTIPLE PURCHASES. WE OFFER 30 DAY RETURN POLICY. ANY POSSIBLE RETURNS WILL BE HANDLED ON A ITEM BY ITEM BASIS. PLEASE BE SURE AND TAKE A LOOK AT THE OTHER NICE AUCTIONS WE HAVE LISTED THIS WEEK. Thanks for looking and have a great day.
|
|
|
Lot #42 Nice 2 3/4" KY Hopewell Blade Indian Arrowhead Native American Artifacts
Lot#42 Nice 2 3/4" KY Hopewell Blade. Low starting bid with no reserve. Guaranteed ancient and authentic. Returns accepted with documentation from reputable authenticator. I combine shipping on everything except Flat Rate boxes. Please visit my other auctions and thank you for your business.
|
|
|
Flexifoil Blade 3 Blue
Flexifoil Blade 3 Blue Canopy is in perfect condition. Needs new bridle. PayPal only. Please pay for auction within 3 days of auction close to avoid a relist. Questions welcome Posted with 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13fb2dc1042-0xf0-
|
|
|
WIKUS HEAVY DUTY BANDSAW BLADE 12'-3-1/2" X 1/2" X .035", 4 TPI
aims WIKUS HEAVY DUTY BANDSAW BLADE 12'3-1/2" X 1/2" X.035" 4 TPI read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Wikus This is A Band Saw Blade in Great condition. Specifications: Length: 12'3-1/2" Width: 1/2" Thickness: 035" Teeth Per Inch: 4. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WIKUS HEAVY DUTY BANDSAW BLADE 12'3-1/2" X 1/2" X.035" 4 TPI WIKUS HEAVY DUTY BANDSAW BLADE 12'3-1/2" X 1/2" X.035" 4 TPI Reliable Tool Inc. ... morec 2011 | Powered by
|
|
|
WIKUS HEAVY DUTY BANDSAW BLADE 15' X 1-3/8" X .042", 1.4 -2 TPI
aims WIKUS HEAVY DUTY BANDSAW BLADE 15' X 1-3/8" X.042" 1.4-2 TPI read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Wikus This is A Band Saw Blade in Great condition. Specifications: Length: 15' Width: 1-3/8" Thickness: 042" Teeth Per Inch: 1.4- 2. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WIKUS HEAVY DUTY BANDSAW BLADE 15' X 1-3/8" X.042" 1.4-2 TPI WIKUS HEAVY DUTY BANDSAW BLADE 15' X 1-3/8" X.042" 1.4-2 TPI Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
LENOX BANDSAW BLADE - 9' X 3/4" X .035" X 8-12 TPI
aims LENOX BANDSAW BLADE- 9' X 3/4" X.035" X 8-12 TPI read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Lenox This is a Precision Band Saw Blade in good condition. Specifications: Length: 9' Width: 3/4" Thickness: 035" Teeth Per Inch: 8-12 tpi. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LENOX BANDSAW BLADE- 9' X 3/4" X.035" X 8-12 TPI Reliable Tool Inc. c 2011 | Powered by
|
|
|
Genji: Days of the Blade PS 3
Like Brand New. Lovely game, additional postage rates will apply depending on your country
|
|
|
Vintage Hopalong Cassidy 3 Blade Hammer Brand Knife 3 DAY AUCTION.
RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fb72a1309-0x100-
|
|
|
JAPANESE WWII BAYONET - 15 3/4" BLADE - COMPLETE - EXC. COND. UNUSUAL MARKING
NO RESERVE BID- Here is a really interesting vintage WWII Era Japanese Bayonet with its original sheath just as found in an old attic trunk. The blade measures approximately 15 3/4" long and is in excellent condition. It has traces of the original preservative grease. There are no dings. Nicks signs of sharpening. The markings on the ricasso appear to be somewhat unusual. The handle and scabbard are also in great shape but have seen wear from handling and storage. The do have some areas of very light surface rust but should clean up somewhat. Certainly a great old WWII Souvenir Piece for a very low starting bid. TERMS: Buyer pays actual shipping costs.
|
|
|
3.75" Authentic Ohio Knife Blade Arrowhead Arrtifact-AACA
This is a very nice authentic Knife Blade arrowhead found in Ohio. It is made from black Coshocton flint and is approximately 3.75" long. Point has excellent patina. Nice form, and is very nicely made. Full history will be given to winning bidder. A full history. As I have it, will either be listed with the artifact or sent with the artifact when shipped. All artifacts listed are 100% guaranteed authentic unless clearly identified otherwise. I am a proud member of the Aunthentic Artifact Collectors Association(AACA) so all of its rules and regulations apply here. I give a 30 day refund period so you have time to inspect the artifact or send it for authentication to the expert of your choice. I will refund your original purchase price(you pay return shipping) if you are not happy with your purchase, and it is in its original condition ... moreas sent. My collection has gotten too large. And needs to be thinned out. So, be watching over the next several months as I will be having alot of quality artifacts to sell. If you have any questions or need more pictures, just let me know. Artifacts are a finite resource that only decreases in availability, but increases in value over time. This is your chance to add some quality artifacts to your collection at a reasonable price. Payment is expected within 3 days from the end of auction. Or item will be re-listed.unless other arrangements are made) Pay Pal only for payment. I will combine shipping for multiple items won within the 3 day buying period. Posted with
|
|
|
Authentic Indian Archaic Knife Blade 3" Beautiful Color - TN Guaranteed AACA
Authentic Indian Archaic Knife Blade 3" Beautiful Color- TN Guaranteed AACA You are bidding upon an Archaic Knife Blade that I think is from Berlington Chert. It is approximately 3" Long and 1 1/2" wide. Please look closely at the photos as they describe it better than I can. I am a member in good standing of the AACA(Authentic Artifact Collectors Association) All of my items are 100% genuine and original and carry a 14 day unconditional money back return policy. The photos describe the item better than I so please look closely. I will be more than happy to provide additional photos on request. I will be listing many other items from this collection over the next several weeks. Here is my Feedback for some other Ancient American items I have sold: Authentic Colorful Chert Paleo SCRAPER 2 1/2" x 2" Hardin County. TN ... moreAACA“Thanks AAAAAAAAAAAAAA+++++++++++++++” 64040hm Jun-21-13 Authentic Indian Flint Celt 2 1/2" Archaic- Shelby Co. TN- Guaranteed AACA“Thanks Fast Shipping AAAAAAAAA++++++++” 64040hm Jun– 20-13 Authentic Indian Artifact Archaic 3/4 Groove Black Granite Axe 7" x 4" AACA“ Nice Axe. Fast and smooth Transaction, great sale” railside 65 Authentic Large 6" unusual Quartz CELT- Hardin County. TN AACA“Great piece. Recommended seller” meadowdave Mar-06-13 AACA Indian Artifact PALEO Knife/Scraper/Tool 3 1/2" Hardin County. TN“Very fast. Good seller” chuck0357 Mar-03-13 Authentic Indian Artifact Paleo Knife 3 1/2" x 1 3/4" Hardin County. TN– AACA“Nice” mdup1809 Authentic Archaic Indian Jasper 2 3/4" long- Found in 1950's early'60's AACA“As advertised. Pleased” et.2965 Jan-30-13 PRE-COLUMBIAN OLMEC 2 3/4"JADE CELT FROM GUATAMALA"Very Nice& Rare Item. Well Packed. Quick& Safe Post. Very Pleased. THANK YOU! eamk PRE-COLUMBIAN"MAYAN JAGUAR KNIGHT- DUG IN 1958 ORIG"super" herberta36 PRE-COLUMBIAN TOLTEC MONKEY HEAD EFFIGY CIRCA 500AD: Super Seller. Great Communication. Super Fast Shipping. A real pleasure. 5*
|
|
|
Authentic Indian Paleo Knife Blade 3" Beautiful Color - TN Guaranteed AACA
Authentic Indian Paleo Knife Blade 3" Beautiful Color- TN Guaranteed AACA You are bidding upon a very colorful Paleo Knife that was found in Kentucky. It is approximately 3 1/8" Long and 1 1/8" wide. Please look closely at the photos. I am a member in good standing of the AACA(Authentic Artifact Collectors Association) All of my items are 100% genuine and original and carry a 14 day unconditional money back return policy. The photos describe the item better than I so please look closely. I will be more than happy to provide additional photos on request. I will be listing many other items from this collection over the next several weeks. Here is my Feedback for some other Ancient American items I have sold: Authentic Colorful Chert Paleo SCRAPER 2 1/2" x 2" Hardin County. TN AACA“Thanks AAAAAAAAAAAAAA+++++++++++++++” ... more64040hm Jun-21-13 Authentic Indian Flint Celt 2 1/2" Archaic- Shelby Co. TN- Guaranteed AACA“Thanks Fast Shipping AAAAAAAAA++++++++” 64040hm Jun– 20-13 Authentic Indian Artifact Archaic 3/4 Groove Black Granite Axe 7" x 4" AACA“ Nice Axe. Fast and smooth Transaction, great sale” railside 65 Authentic Large 6" unusual Quartz CELT- Hardin County. TN AACA“Great piece. Recommended seller” meadowdave Mar-06-13 AACA Indian Artifact PALEO Knife/Scraper/Tool 3 1/2" Hardin County. TN“Very fast. Good seller” chuck0357 Mar-03-13 Authentic Indian Artifact Paleo Knife 3 1/2" x 1 3/4" Hardin County. TN– AACA“Nice” mdup1809 Authentic Archaic Indian Jasper 2 3/4" long- Found in 1950's early'60's AACA“As advertised. Pleased” et.2965 Jan-30-13 PRE-COLUMBIAN OLMEC 2 3/4"JADE CELT FROM GUATAMALA"Very Nice& Rare Item. Well Packed. Quick& Safe Post. Very Pleased. THANK YOU! eamk PRE-COLUMBIAN"MAYAN JAGUAR KNIGHT- DUG IN 1958 ORIG"super" herberta36 PRE-COLUMBIAN TOLTEC MONKEY HEAD EFFIGY CIRCA 500AD: Super Seller. Great Communication. Super Fast Shipping. A real pleasure. 5*s! id vickiaug7 May-24-10 PRE-COLUMBIAN 10
|
|
|
Beverly Metal Throatless Hand Shear B-3 Cutting Tool B3 5 3/8 Blade
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Beverly Metal Throatless Hand Shear ... moreB-3 Cutting Tool B3 5 3/8 Blade DESCRIPTION: ~ Up for bid is a good working Beverly metal throatless hand shear B3 cutting tool with a 5 3/8 blade. gsrx_vers_522(GS 6.6.2(522)
|
|
|
Wasp 3-Blade Hi-Tech 115 Grain Broadhead 2 Packages 12 Total 1 ¼ Cut
Description Two older packages of broad heads never used. They have 1 ¼ inch cutting diameter. Stainless steel, 020 thick, 115 grains. Model number 130355. I Do Combine Shipping Items Paid For Ship Same Or Next Day Priority Mail No International Shipping a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13fb9ee82c9-0xfb-
|
|
|
Nemco 55450-3 Easy Kutter Polymer Handle 1/4" French Fry Cutter Blade Included
As a motivated seller I do accept reasonable offers. I can deal on multiple purchases or shipping on most items. But some do have special conditions ~ Be sure to ask before paying invoices ~ Please let me know before paying. So I can adjust invoice accordingly. You could be too late if you wait til the last minute to bid& the auction ends with an offer or a buy it now option. Packaging& Mailing I send packing photos before sending delicate items. Precise tracking has changed a lot this year. Sometimes stalling long periods Please watch when items stall close by. So a surprise delivery doesn't send it back to post for further chance of loss or damage My aim is your effortless transaction Please don't forget feedback It is so important Shipping. Tracking, Packaging All included in price& shipping Shipping is packaged weight ... moreaveraged from cheapest to highest zips& is seldom to far off I'll send your tracking# ASAP so you can watch for the delivery I provide insurance on high end& most delicate items 5 star feedback is important so please give me opportunity to resolve any complications Important Auction Notables: I acquire a great many collectables from Estate Sales these re auction items are'NO RESERVE' I add the same ID stamping. Sticker, COA, or estate description provided from my purchase to my listings With no real education. Knowledge or history on these items I do try to do supporting research But I am beginning to find new homes for so many displaced items that time is sometimes limited So much in an area makes it hard to tell where an odor is from. When perfume is usually the overpowering odor ALSO. In recognizing& handling collectables, buyers are happiest with unaltered items, so I sell all items“ as found” Sometimes described needing cleaned/ polished& sometimes not. You can assume it was NOT cleaned by me So please don't leave harmful feedback about being'dirty' or having an' odor' Shipping price is best guess scenario. As the winner co
|
|
|
3 3/8" Authentic Mo. Archaic Knife Blade Artifact-AACA
This is a very nice authentic Archaic Knife Blade arrowhead found in Southwest Mo. It is made from grey?tan chert and is approximately 3 3/8" long. Point has no brainer patina.Great form, and is very nicely made. The point has a couple of dings, but still very nice. Full history will be given to winning bidder. A full history. As I have it, will either be listed with the artifact or sent with the artifact when shipped. All artifacts listed are 100% guaranteed authentic unless clearly identified otherwise. I am a proud member of the Aunthentic Artifact Collectors Association(AACA) so all of its rules and regulations apply here. I give a 30 day refund period so you have time to inspect the artifact or send it for authentication to the expert of your choice. I will refund your original purchase price(you pay return shipping) if you are ... morenot happy with your purchase, and it is in its original condition as sent. My collection has gotten too large. And needs to be thinned out. So, be watching over the next several months as I will be having alot of quality artifacts to sell. If you have any questions or need more pictures, just let me know. Artifacts are a finite resource that only decreases in availability, but increases in value over time. This is your chance to add some quality artifacts to your collection at a reasonable price. Payment is expected within 3 days from the end of auction. Or item will be re-listed.unless other arrangements are made) Pay Pal only for payment. I will combine shipping for multiple items won within the 3 day buying period. Posted with ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13fbc73b04f-0xee-
|
|
|
Wenoka Stainless Steel Scuba Diving Knife 3" blade, "Blackie Collins"
For your consideration is this Stainless Steel Wenoka Scuba Diving K ni fe. Blackie Collins" with a 3" Blade. 7" tot al. Great for your collection. Thanks so much for your interest. International buyers email me for a shipping quote.
|
|
|
Survival Wyoming Game Saw 3 Blade Camo Case Hunting Butchering Camping Militaria
What a cool find! Great Wyoming folding lightweight saw for harvesting game. Survival tool, prepping, camping and more! Camo case includes 3 saw blades, about 11" saw handle and blade holder. Nice condition. Be prepared! Thanks for looking! Buyer pays with paypal within 5 days of auction close. Buyer pays your choice economy or priority shipping, thanks for looking!
|
|
|
316 Stainless Steel 3-Blade Propeller, 5.9" dia x 5/8" bore dia, Used
316 Stainless Steel 3-Blade Propeller. 5.9" dia x 5/8" bore dia, Used This was obtained from a laboratory that went out of business. This is in good. Used condition, shows some wear and use. Buyer pays for shipping according to the ebay calculator. And I will combine shipping for items purchased within a day of each other. THANKS FOR LOOKING!
|
|
|
Aesculap Richardson Retractor 9-1/2" Length 3/4" Blade BT475R Stainless Steel
One(1) Aesc ul ap Richardson Retractor. 9-1/2" total length, 3/4" blade width, 3/4" blade depth. Blade face is relatively flat with lateral edges curved upwards. Distal edge straight across and turned downward. Stainless Steel Surgical Instruments. Good condition. Not for human consumption. Not an implantable device.
|
|
 |