|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$15.46 Shipping Condition: New Location: Rowland Heights, United States Quite and stable Running: Low noise level ≤45dB, Max up to 7000rpm. Safe, endurable and robust rotor with clamp locking design. Accelerates and Brakes ... morein seconds: Auto braking on door opening and stop quickly when the lid is opened or powered off.
Buy It Now
$32.42 Shipping Condition: Used Location: Walnut, United States ONiLAB DM0506 low-speed centrifuge, supplied with built in fixed angle rotor A6-15P with adaptors which can hold up to 15mL/10mL/7mL/1.5-5mL×6 tubes. ... moreIt is widely used for separation routine practice.
Buy It Now
$15.46 Shipping Condition: Used Location: Walnut, United States Quite and stable Running: Low noise level ≤45dB, Max up to 7000rpm. Safe, endurable and robust rotor with clamp locking design. Accelerates and Brakes ... morein seconds: Auto braking on door opening and stop quickly when the lid is opened or powered off.
Buy It Now
$25.98 Shipping Condition: Used Location: Berkeley, United States THERMO IEC CENTRA CL-2 CENTRIFUGE. Units are untested, but power on. All include CAT-809 rotors and tubes.
Buy It Now
$20.00 Shipping Condition: Used Location: Williamsburg, United States UP FOR SALE ..... 12 PLACE ROTOR FOR DUPONT CELLWASHER 2 CENTRIFUGE . 20.00 S/H to lower 48 THANKS FOR LOOKING !
Buy It Now
Free Shipping Condition: Used Location: Madison, United States Recently retired. Dr Beck (the manager) has a Ph.D. in cellular an molecular pathology.
$75.24 Shipping Condition: Used Location: Kenosha, United States This Eppendorf microplate rotor is suitable for use with 5804/R and 5810/R centrifuges. It has a swing bucket rotor type and is specifically designed ... morefor use with microplates. The brand is well-known for producing high-quality scientific equipment. The model number of this product is A-2-DWP.
Buy It Now
$40.00 Shipping Condition: Used Location: Quincy, United States EPPENDORF A-2-MTP WINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR Description-RP Inventory Location: MF 12-3 This auction is for an EPPENDORF A-2-MTP ... moreWINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR THIS AUCTION IS FOR THE LID ONLY Unfortunately the Ebay shipping calculator can often overcharge for shipping especially on smaller items. Please feel free to contact us for an accurate shipping quote or request an alternate shipping method. We ship FedEx and USPS as well as UPS. We will also be glad to ship against your UPS or Fedex account. We combine shipping costs wherever possible. Ready to be shipped: For the most accurate information please look at the pictures provided. All items that have been listed. Have not been tested. We try to the best of our ability to describe the physical appearance and to provide an accurate description of each item that is being sold, but please refer to the picture or attached PDF if there is one available for a better description. The item you receive may be different from the actual item in the photo because some lots are multiple quantities of the same item. All measurements(lengths, widths, diameters) may not be exact so contact us if you want to ensure an exact measurement. A ll items are sold as is. Untested, with absolutely no warranty or return. If you do not agree to the sale under these conditions please do not purchase the items. If you have any questions please contact us for more information. Our goal is to provide the purchaser with as much information as possible. Payment We accept the following forms of payment: Pay Pal. Credit Cards, or E-check through pay pal. We do not ship C.O.D. and items will only be shipped when an E-Check has been confirmed and not pending. A Credit Card Purchase is only shipped when the money is transferred from the Credit Card Processing Company to our banking account. Shipment Payment is mandatory within 5 business days of auction close. Packages will be shipped UPS Ground and or FED EX economy class. If special shipping
Buy It Now
Free Shipping Condition: Used Location: Cass City, United States Beckman Coulter JA-14 Fixed-Angle Aluminum Rotor, Biosafety Lid 6 x 250 mL, 14,000 rpm, 30,100 x g Lid included (gasket in good condition) Also includes ... morea set of Sorvall 50ml insert adapters (03072) Product No: 339247 JA-14 Fixed-Angle Rotor, Aluminum; Major applications: General-purpose, large-volume and multi-tube processing. Adapters permit use of up to 30 each 15-mL tubes and up to 72 each 3-mL tubes. For use in Avanti reg; J Series J6 and J2 Series centrifuges. Product Specifications Platform: Avanti Rotor Type: Fixed-Angle (High Performance) Maximum RPM: 14,000 rpm k-Factor: 1,764 Nominal Capacity: 1500 mL rMAX: 137 rMIN: 35 rAV: 86 mm.
Buy It Now
$10.00 Shipping Condition: Used Location: Killeen, United States Lot of 21 pieces.Aluminum Buckets for CENTRIFUGE SWING ROTORMeasurements: approx 2” diameter by 2-1/4” heightCondition is Used.Bin 34
Buy It Now
$80.34 Shipping Condition: Used Location: Endicott, United States Used DuPont Sorvall HL-2B Centrifuge Rotor w/ Baskets.
Buy It Now
Free Shipping Condition: Used Location: Spring, United States If it is not pictured that it is not included. - have scratches - see pics.
Buy It Now
$65.00 Shipping Condition: For parts or not working Location: Williamsburg, United States UP FOR SALE : SORVALL GSA 6 POSITION FIXED ANGLE. CENTRIFUGE ROTOR. SUPPOSED TO WORK ON RC-2 RC-5 RC2-B RC-5B CENTRIFUGE. SOLD AS IS. NO RETURNS.WINNER ... morePAYS 65.00 S/H ..TO LOWER 48 STATES OR EBAY GLOBAL. VERY HEAVY. THANKS FOR LOOKING.
Buy It Now
Free Shipping Condition: Used Location: San Diego, United States Refurbished Eppendorf 5810R 5810 R Refrigerated Centrifuge w/ A-4-62 Rotor* Click on Images for larger view* Here we have a Factory Refurbished Eppendorf ... moreModel 5810 R Refrigerated Benchtop Centrifuge. This sale includes a Model A-4-62 Rotor with four matched weight 5810 Swing Buckets. This centrifuge has had less than 200 operating hours since it was purchased new. It is in Excellent Condition and comes fully serviced and refurbished by Eppendorf's West Coast maintenance facility on May 31. 2013. This included adding the latest firmware, with a brand new lid spring installed as well. This machine is as close to a new machine as they come! The centrifuge operates on 115VAC. The Eppendorf 5810 R Centrifuge is a workhorse for medium to high-throughput laboratories. It combines extraordinary versatility and capacity for both tubes and plates with an extraordinary compact footprint. With the new rotor generation the capacity of the 5810 R is the most compact 3 liter centrifuge currently available in the market. Specifications- Max. speed: 200-14.000 rpm(in 10 rpm increments) Maximum capacity: 4 x 750 ml Rotor options: 18 Accel.Braking ramps: 10/10 Programs: 35 user programs Timer: 1 min. to 99 min. With continuous mode, short spin Temperature control range: 9 °C to 40 °C Power supply: 115VAC/60Hz Power requirement: Max. 1.650 W Please CLICK HERE for an Operating Guide. Shipping Weight: 280 lbs Thanks The Right Stuff Online. Inc. WINNING BIDDERS WELCOME TO PICKUP. Click HERE for directions. We Ship Worldwide! Simply email us for a shipping quote* This item Must Ship Freight. IT CAN NOT SHIP UPS. We search through a broker(CaseStack) for the best rates and delivery time to get your purchase to your door. Unfortunately they do not allow for Dock or Terminal Pick up. Before we can get you a quote. We will need to know a few things. 1. The Ebay item number. 2. Your address with zip code and phone number. 3. If your Address is a Business or Residence. 4. If a Business. Do you have a loading dock or forkl
Buy It Now
Free Shipping Condition: New Location: United States 800-1 4000r/min 20ml× 6 1790×g. 80-2 4000r/min 20ml×12 2380×g. When you are going to operate the machine, you should make the rotor is not corroded/hurt. ... moreDo not open the cover of the machine and touch the rotor when the rotor when the rotor is in moving.
Buy It Now
Condition: Used Location: San Diego, United States Sigma 4-16 Centrifuge 10497. Qiagen Sigma 09100 Swing Bucket Rotor. 2x 09366 Microplate Swing Buckets. - There is an issue with the insulation around ... morethe power cord connection to the machine, we do not see exposed conductors so you can tape it or replace it if needed.
Buy It Now
$49.95 Shipping Condition: Used Location: Windsor, United States IEC CENTRA CL2 CL-2 Benchtop Centrifuge 215 Rotor with 4 Vessels. Sourced from a Professional Working Laboratory. The sale of this item may be subject ... moreto regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: New Location: United States 800-1 4000r/min 20ml× 6 1790×g. 80-2 4000r/min 20ml×12 2380×g. Intended as a worktop centrifuge. Maximum relative. When you are going to operate the machine, ... moreyou should make the rotor is not corroded/hurt.
Buy It Now
$19.99 Shipping Condition: Used Location: Jackson, United States THE GLASS PIECE IS INCLUDED WITH THE BUCKETS AS SHOWN IN PICTURES. ITEM WAS PULLED FROM A WORKING CENTRIFUGE.
Buy It Now
Free Shipping Condition: Used Location: Dawsonville, United States Home Lab Equipment Analytical Equipment Centrifuges Controllers Detectors Generators Mixers/Grinders/Homogenization Sample Preparation Dryers Heaters. ... moreBaths& Circulators Lab Suplies Power Supplies Pumps Scales Test Equipment Other Microscopes Medical Equipment Item Information. Beckman Coulter Allegra X-22R Refrigerating Benchtop Centrifuge w/ SX4250 Rotor SKU: 0721294772 Condition: Used Warranty: 30-Day Warranty Description. Condition: Previously-owned. But in excellent cosmetic and working condition. It includes the SX4250 Swing Bucket rotor and a variety of bucket inserts, however it is missing two buckets. Includes everything pictured. Unit was tested and is fully-operational. Buyer is responsible for determining the suitability of this product for their application. Electrical Requirements: 120V. 60Hz, 10.5A Temperature Range: 2 to 40°C Speed Range(without rotor) 0 to 15.500 rpm Overall Dimensions: Approximately 18.25W x 28D x 14.75H(32H with door open) inches Warranty. If you are unsatisfied with your purchase or buying experience in any way. Please contact us first so we can rectify the situation before submitting feedback. We'll do whatever it takes to make things right! M-F. 8am to 6pm EST Toll Free: 1-419-645-5463 Many online sellers are there to"sell and forget. At Industrial Merchants. Customer cervice is central. Not just something we do on the side if we have to. And although in many cases we are not experts on the equipment we are selling, we are more than willing to help you work through any technical difficulties you encounter with one of our products, if we can. 30-Day Warranty All our products carry a 30-Day Warranty. If the product does not work you may return it for a replacement or refund within 30 days of our ship date. Customer is responsible for return shipping and item's safe arrival at our facility. If you receive a non-functional product. Please contact us to hold a replacement or return the item with your order number. All items must be returned in exact conditio
Buy It Now
$20.10 Shipping Condition: Used Location: Andover, United States IEC 221 & 211 Centrifuge Rotor with six 303 shields, two 320 shields, two 325 trunnions, cushions, and crown nut. Inquire about individual pieces.
Buy It Now
Free Shipping Condition: Used Location: Naperville, United States Sorvall HS-4 Swinging Bucket Centrifuge Rotor 7,500 rpm w 2x 00480 Swing Buckets and 6 Test Tube Inserts 473 for Sorvall RC5, RC5B, RC5B Plus, RC5C, RC5C ... morePlus, and RC26 Plus. Type Swinging Bucket Rotor.
Buy It Now
Free Shipping Condition: Used Location: Saint Louis, United States You are purchasing a Eppendorf Rotor A-2 MTP. Great used condition, genuine OEM Rotor. See photos for condition details.
Buy It Now
Free Shipping Condition: Used Location: Columbia, United States FITS 1.5/2mL, NO COVER. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED, IT IS NOT INCLUDED. UP FOR SALE IS.
Buy It Now
Free Shipping Condition: Used Location: Waterford, United States EPPENDORF A-2-MTP WINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR Description-RP Inventory Location: MF 12-3 This auction is for an EPPENDORF A-2-MTP ... moreWINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR THIS AUCTION IS FOR THE LID ONLY Unfortunately the Ebay shipping calculator can often overcharge for shipping especially on smaller items. Please feel free to contact us for an accurate shipping quote or request an alternate shipping method. We ship FedEx and USPS as well as UPS. We will also be glad to ship against your UPS or Fedex account. We combine shipping costs wherever possible. Ready to be shipped: For the most accurate information please look at the pictures provided. All items that have been listed. Have not been tested. We try to the best of our ability to describe the physical appearance and to provide an accurate description of each item that is being sold, but please refer to the picture or attached PDF if there is one available for a better description. The item you receive may be different from the actual item in the photo because some lots are multiple quantities of the same item. All measurements(lengths, widths, diameters) may not be exact so contact us if you want to ensure an exact measurement. A ll items are sold as is. Untested, with absolutely no warranty or return. If you do not agree to the sale under these conditions please do not purchase the items. If you have any questions please contact us for more information. Our goal is to provide the purchaser with as much information as possible. Payment We accept the following forms of payment: Pay Pal. Credit Cards, or E-check through pay pal. We do not ship C.O.D. and items will only be shipped when an E-Check has been confirmed and not pending. A Credit Card Purchase is only shipped when the money is transferred from the Credit Card Processing Company to our banking account. Shipment Payment is mandatory within 5 business days of auction close. Packages will be shipped UPS Ground and or FED EX economy class. If special shipping
Buy It Now
Free Shipping Condition: Used Location: Willits, United States Thermo Scientific IEC Centra CL2 Benchtop Centrifuge w/ 236 Rotor& Buckets CL 2 Move mouse over images to see larger version Click to view supersized ... moreimage IEC Centra CL2 Benchtop Centrifuge w/ 236 Rotor& Buckets DESCRIPTION: Thermo Scientific IEC Centra CL2 Benchtop Centrifuge w/ 236 Swinging Bucket Rotor& 4 Two-Hole Buckets. MODEL: Centra CL2 ROTOR# 236 Max 3900 RPM CONDITION/FUNCTIONALITY: Pulled from a working environment. Centrifuge powers on and rotor spins. Only one test cycle was performed at 3000 RPM for 10 minutes and the cycle completed without any issues. We don't have the knowledge to perform any further testing. Cosmetically. The plastic piece on the front is cracked but otherwise in overall great condition(see pictures) DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection sensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in active use, Envelope mode peak detect for glitch capture, Averaging for smoothing of last four waveform acquisitions, Continuous envelope mode for monitoring signal changes, Four front-panel setup save memories, Four waveform save memories, Fully configurable front panel and waveform transfers via the RS-232 communications port- See more at: http:www.testequipmentconnection.com/4022/Tektronix_222.php#sthash.mvfQ9Vh5.dpuf DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection sensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in acti
Buy It Now
$19.99 Shipping Condition: Used Location: Waukee, United States This item comes as pictured above in used working condition I will ship this item within 1-2 business days from completion of payment If you have any ... morequestions or concerns, please message me. Thank you
Buy It Now
$21.85 Shipping Condition: Used Location: Conroe, United States Centrifuge Rotor 4 space head - Swing Bucket max 4750 RPM/min Max Load 6.8kgCondition: UsedUnknown model or brandMeasures approx 13” x 13” x 2”
Buy It Now
Free Shipping Condition: Used Location: Marietta, United States Good - Working condition.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Speed: 4000rpm. Centrifuge 1. Palm centrifuge. 2 The centrifuge tube must be tightly covered to prevent the liquid in the tube from corroding the centrifuge. ... morePCR centrifuge tube: capacity 0.2ml 8 2.
Buy It Now
$172.39 Shipping Condition: Used Location: Logan, United States Lightly used Eppendorf Centrifuge model 5702 made in 2002 for use with interchangeable rotors(single rotor included) and site window. See below for manufacturer's ... morespecs: All 5702 models can be used in a range of settings. From the clinical lab to the cell culture lab. With various fixed-angle and swing-bucket rotors available, they can accommodate almost any kind of tube. The economical centrifuge for the clinical lab. With various fixed-angle and swing-bucket rotors and an extensive range of adapters. Nearly all types of tubes can be used. Another advantage is that we have designed all rotors within the 5702 line to be interchangeable. Product feature Parameter locking, Very silent, At Set" function starts timer when set speed is reached for reproducible results. Sight glass for quick calibration check, 6 Rotor options, Description, Centrifuge 5702, Dimensions(W x D x H) 32 x 40 x 24 cm, Weight, 20 kg, Power supply, 230 V/50 Hz, Max. power requirement, 200 W. Starts and spins but we have not fully tested it. Warranty is for DOA(dead on arrival) only. PLEASE NOTE: THIS ITEM SHIPS VIA FEDEX OR UPS GROUND. Check out my! OUR RETURN POLICY: IN THE EVENT YOU DETERMINE THIS ITEM WILL NOT WORK AS YOU THOUGHT OR YOU’VE CHANGED YOUR MIND. WE WILL GLADLY REFUND THE ORIGINAL PURCHASE PRICE OF THE ITEM(ORIGINAL SHIPPING WILL NOT BE REFUNDED AND BUYER PAYS RETURN SHIPPING) YOU CAN RETURN THE ITEM BY: CONTACTING US AS SOON AS POSSIBLE(UP TO THE 14 DAYS ALLOWED IN THE LISTING) EXPLAINING YOUR DESIRE TO RETURN THE ITEM. SHIP WITHIN 3 DAYS OF YOUR NOTICE TO US REGARDING INTENT TO RETURN THE ITEM. PLEASE EMAIL THE TRACKING DATE AND NUMBER IMMEDIATELY(AGAIN. WITHIN THE 3 DAYS OF NOTIFICATION) ITEM SHOULD BE PACKED AND SHIPPED IN THE SAME MANNER IT WAS RECEIVED. WE WILL REFUND YOUR PURCHASE PRICE UPON RECEIPT OF ITEM& CONFIRMATION THAT IT IS IIN THE SAME CONDITION AS WHEN IT WAS SHIPPED.
Buy It Now
$24.76 Shipping Condition: Used Location: Logan, United States Thermo IEC Centra CL2 Centrifuge. Centra CL2 Centrifuge. Centra CL2. with 215 Rotor, Thermo Bucket Adapters, Buckets. Thermo IEC. Markings on Centrifuge ... moreAttached IEC 215 Rotor. What you see is what you will receive - nothing more or less.
Buy It Now
$9.99 Shipping Condition: Used Location: Jackson, United States International Centrifuge Rotor Buckets.
Buy It Now
Free Shipping Condition: Used Location: Dawsonville, United States You are looking at a Set of 4 Beckman Coulter Centrifuge Rotor Buckets, model 392252. This model is a 250 mL bucket with a max RPM of 4500 RPMs. Beckman ... moreCoulter. Buckets Only. Everything included in this ad is shown in the pictures unless otherwise stated.
Buy It Now
$21.97 Shipping Condition: New – Open box Location: Los Angeles, United States Condition Note: Includes everything pictured (buckets in 4th picture, rotor underneath in photos 5-7). Surplussed from a lab setting. Item is new, open ... morebox. Condition: New, Open Box.
Buy It Now
Free Shipping Condition: Used Location: Spring, United States If it is not pictured that it is not included. - ready to be put to great use. What you will receive - have scratches - see pics.
Buy It Now
$10.60 Shipping Condition: Used Location: Endicott, United States
Buy It Now
Condition: For parts or not working Location: Gilroy, United States Search our eBay Store! Beckman J2-21 Refrigerated High Speed Floor Centrifuge 18000RPM JA 18.1 Rotor SKU: JV-MAT-C-BECKMANJ221 Condition: For parts or ... morenot working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Beckman J2-21 Refrigerated Floor Centrifuge 18000RPM with JA 18.1 Rotor Model: J2-21 w/ JA 18.1 Rotor Physical Condition: Good. Unit has some minor scuffs. Scratches and signs of use. We are unsure that the unit powers on because we could not find a socket to match the plug type. Power cable is included. We do not have the necessary resources in our facilities to properly test this unit. BEING SOLD AS-IS FOR PARTS OR REPAIR. Dimensions(L"W"H" 36*28*51 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combi
Buy It Now
Free Shipping Condition: Used Location: Columbus, United States THIS IS A NICE GOOD WORKING IEC CENTRA CL2 CENTRIFUGE WITH 236 ROTOR. Shipping on this item is 45.00 to the lower 48 states. If you are from overseas ... moreor Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item30.
Free Shipping Condition: Used Location: Dawsonville, United States This model is only for the 22R Refrigerated Microcentrifuge. It has a max RPM of 14,000. Beckman Coulter. 6 Swing buckets, Lid. Everything included in ... morethis ad is shown in the pictures unless otherwise stated.
Buy It Now
Free Shipping Condition: Used Location: Madison, United States Please read full item description.
Free Shipping Condition: Used Location: Campbell, United States Eppendorf 5418 Centrifuge w/ Rotor FA-45-18-11 & Aerosol-Tight Lid. Capacity of 18 x 1.5/2.0 ml tubes with speeds up to 14,000 RPM. The sale of this item ... moremay be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: New Location: San Diego, United States Our team will open a support ticket and assist you every step of the way. Top Quality Products. After the expiration of the warranty period, MFI is available ... moreto assist with technical support. MFI is now lead by a highly skilled and experienced team which includes the founders, Arnold and Annette Wiesel, their son, Augustus Wiesel, and their daughter, Alex Wiesel.
Buy It Now
$50.00 Shipping Condition: Used Location: Miami, United States This Beckman Coulter JA-10 centrifuge is the perfect tool for medical and laboratory purposes. Its 6x500ml capacity and 10,000rpm fixed rotor make it ... moreideal for use with J2, J6, and Avanti J centrifuges. The homogenizer is designed to ensure that your samples are mixed evenly and efficiently, making it an essential tool for any laboratory or clinic. With its reliable performance and high-quality construction, this centrifuge is sure to meet all your needs.
Buy It Now
Free Shipping Condition: Used Location: Pelham, United States To open, simply press the lid release (blue button) located on the front of the centrifuge. Ordering information: The VWR® Mini Centrifuge is supplied ... morewith a rotor for eight 1.5 mL or 2.0 mL tubes. The unit features a quick-release rotor adapter (no tools required) that accommodates either an 8-Place tube or 4x8 PCR strip rotor.
Buy It Now
$10.00 Shipping Condition: Used Location: Killeen, United States
Buy It Now
Condition: Used Location: Las Vegas, United States 770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, ... moreOn these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. SORVALL T6000B BENCHTOP CENTRIFUGE T6000 WITH H1000B SWINGING BUCKET ROTOR This auction is for one Sorvall T6000B Benchtop Centrifuge. The RT6000B combines the features of the tabletop centrifuge and those of the larger refrigerated centrifuge in a compact tabletop instrument. It is similar to other SORVALL® Tabletop Centrifuges. With an added refrigeration system that consists of an evaporator/ rotor chamber and a low-temperature condensing unit. The system is designed to maintain temperature within 1°C, while in the operating range of–5°C to +25°C. The T6000B is a non-refrigerated tabletop centrifuge. This auction includes the following: One(1)Sorvall T6000 Benchtop Centrifuge, One(1) Sorvall H1000B Centrifuge Rotor, Four(4) DuPont Instruments Buckets, Two(2) 10 Sample Holders Model# 00884 Max 750 g, Two(2) 20 Sample Holders Model# 00833 Max 750 g, For more detailed information go to: http:mcdonald.ucdavis.edu/uploads/1/8/5/3/1853874/centrifugert6000b.pdf Please note that this unit has a crack in the plexiglass lid that measure(Photo 4) There is some denting in the rear metal case above the power supply(Photo 18) Neither affects the functionality of the system. This unit is in excellent physical condition and will arrive in the condition shown. It co
Buy It Now
Free Shipping Condition: Used Location: San Diego, United States ELMI Sky Line Centrifuge CM-6MT. Swing Bucket Rotor for Microplates. Power Cord. "F3: Key Functions Working". "C4: Used Good". - Good used condition. ... moreYou Will Receive You Will Not Receive.
Buy It Now
$9.88 Shipping Condition: Used Location: Mason, United States Cat No: 75005719. Trouble-free rotor installation and removal No complicated rotor changing procedures. Clear chamber access for cleaning convenience.
Buy It Now
Free Shipping Condition: Used Location: Rocklin, United States
Buy It Now
Condition: For parts or not working Location: Indianapolis, United States It depends on the country. the seal on the lid looks rot and may need new one. This is from a public surplus sale. Sold as is, as described and as seen ... morein the pictures. New, used and/or parts. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: Used Location: Sanford, United States Dupont Sorvall CW-2 Cell Washer Centrifuge &12 pl Swinging Vial Rotor 3600 rpm
Buy It Now
Free Shipping Condition: Used Location: Indianapolis, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Centrifuge 1. Palm centrifuge. Serum separation, fat separation. 2 The centrifuge tube must be tightly covered to prevent the liquid in the tube from ... morecorroding the centrifuge. PCR centrifuge tube: capacity 0.2ml 8 2.
Buy It Now
Free Shipping Condition: Used Location: Gainesville, United States Includes the pictured rotor (part number 75003624) and 2 swing buckets (part number 41338305).
Buy It Now
Free Shipping Condition: New Location: Methuen, United States The warranty does not cover any faults caused by operator error and modifications of any kind. The carrier will not pick up from us without that information.
Buy It Now
Free Shipping Condition: Used Location: Dawsonville, United States You are looking at a used Eppendorf F 45-30-11 Centrifuge Rotor, Tested Working. Tested for Key Functions, Ready for Resale. Everything included in this ... moread is shown in the pictures unless otherwise stated.
Buy It Now
$45.92 Shipping Condition: Used Location: San Diego, United States Thermo Scientific IEC Centra CL2 Benchtop Centrifuge w/ 236 Rotor& Buckets CL 2 Move mouse over images to see larger version Click to view supersized ... moreimage IEC Centra CL2 Benchtop Centrifuge w/ 236 Rotor& Buckets DESCRIPTION: Thermo Scientific IEC Centra CL2 Benchtop Centrifuge w/ 236 Swinging Bucket Rotor& 4 Two-Hole Buckets. MODEL: Centra CL2 ROTOR# 236 Max 3900 RPM CONDITION/FUNCTIONALITY: Pulled from a working environment. Centrifuge powers on and rotor spins. Only one test cycle was performed at 3000 RPM for 10 minutes and the cycle completed without any issues. We don't have the knowledge to perform any further testing. Cosmetically. The plastic piece on the front is cracked but otherwise in overall great condition(see pictures) DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection sensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in active use, Envelope mode peak detect for glitch capture, Averaging for smoothing of last four waveform acquisitions, Continuous envelope mode for monitoring signal changes, Four front-panel setup save memories, Four waveform save memories, Fully configurable front panel and waveform transfers via the RS-232 communications port- See more at: http:www.testequipmentconnection.com/4022/Tektronix_222.php#sthash.mvfQ9Vh5.dpuf DC to 10 MHz bandwidth, 1 MHz single-shot storage bandwidth, 10 MHz repetitive storage bandwidth, Fully isolated dual vertical channels, 5 mV to 50 V per division vertical deflection sensitivity, 50 ns to 20 sec per division time base, On-screen readouts, Auto setup and auto level triggering, Minimum three hour operating time with a fully charged battery, Four hour recharge time with instrument off, Auto time out when not in acti
Buy It Now
$14.99 Shipping Condition: Used Location: Brockport, United States Hardware required for key functions to be tested may have been removed after testing (e.g. hard drive). F3 - Key Functions Working. May be missing components ... moreor parts not essential to key functions. May not include focus materials that are not working or not tested.
Buy It Now
$399.99 Shipping Condition: Used Location: Ridgefield, United States This Beckman Coulter J2-21 centrifuge is a reliable piece of medical and lab equipment that runs on 208V power. It has been tested and found to be in ... moregood working condition. This refrigerated centrifuge is perfect for use in healthcare, lab, and dental environments. With a speed type of 21k and features like refrigeration, it is a versatile machine that can handle a range of centrifugation needs. The brand is known for quality and durability, making this a great investment for any lab or medical facility.
|
|
|
|
TOMY MC-150 CENTRIFUGE ROTOR # TMA-2 FIXED ANGLE 15000 RPM
TOMY MC-150 CENTRIFUGE ROTOR PART# TMA-2 FIXED ANGLE RELATIVE CENTRIFUGAL FORCE 15000 RPM CAPACITY: 1.5 ML X 12 0.4 ML X 12 0.6 ML X 12 VERY CLEAN ROTOR. NO CHIPS, DINGS OR DENTS ITEM# 400 SHIPPING TO U.S.A.
|
|
|
Beckman Centrifuge Type 50.2 Ti Rotor Fixed-Angle Titanium 12x39mL 50,000 rpms
Beckman Centrifuge Type 50.2 Ti Rotor. Fixed-Angle, Titanium, 12 x 39 mL, 50,000 rpm, 302,000 x g Returns: Accepted within 60 Days* 365 Day Warranty* Used. Good Functional Condition, Clean, Good Physical Condition, Paint is Rubbed off in Several Areas Beckman Centrifuge Type 50.2 UNSPSC: 41103909 Rotor Type: Ultra- Fixed Angle Maximum Speed: 50.000 rpm Maximum RCF at r max(g) 302.000 x g k-Factor: 69 Rotor Material: Titanium r min: 54.4 mm r av: 81.2 mm r max: 107.9 mm Nominal Rotor Capacity: 468 mL Number of Rotor Cavities x Nominal Largest Load Capacity: 12 x 39 mL Nominal Largest Container/Bucket/Carrier/Canister Dimensions: 25 x 89 mm Visit My Store for a full list of items available. everything-Ships-for-free Returns: Accepted within 60 Days* 365 Day Warranty* 60 Day Money Back Guaranty. Less Shipping& Return Service if Buyer is ... moreNot Fully Satisfied as long as all of the items are returned in the same condition as received* 365 Day Warranty. I Will Guaranty All Items Included in this Listing to Work as intended by OEM Specifications for No Less Than 365 Days from the Date your shipment arrives When Installed by a Licensed Professional in Accordance to Manufacturer Directions. INK/ PRINTHEADS/ FUSERS/ TONERS& OTHER CONSUMABLES ARE NOT COVERED UNDER WARRANTY* We Will Not be responsible for labor. Improper installations, consequential or incidental damages in nature whether direct or indirect at any time including but not limited to any of the above guaranties or otherwise; any liability shall not exceed a full refund of the auction price. Shipping/ Handling Charges: Shipping: Free* Lower 48 States. Via Economy Post) We always combine shipping whether you choose Free Shipping or Elect to Upgrade. Combined Shipping will be Calculated as Follows: Base Price Size/Weight of Largest Item. Plus Weight of Additional Items. I cover the first $10 of each additional item when you choose to upgrade shipping. As shipping is estimated any overpayments from shipping are notified
|
|
|
SORVALL GLC-2 CENTRIFUGE WORKS & SPINS GREAT COMES WITH SWING ROTOR
Sorvall GLC-2B Centrifuge with HL4 rotor and 598 baskets. $60 flat rate delivery within continental States. Please use eBay contact seller message format for quote to other zones.
|
|
|
Quality Lot IEC Centrifuge Rotor Insert Buckets 2-7230 2-7231
Quality Lot IEC Centrifuge Rotor Insert Buckets 2-7230 2-7231 Pulled as working unit! Great Shape! Lot of 4! 2-7230 50 mL 2-7231 15 mL E-Bay Store# IN-17 Our Items Have No Reserve Price! SHIPPING USA calculations are based on Continental USA destination only. ANY VARIATION OR SPECIAL SHIPPING INSTRUCTIONS MUST BE REQUESTED AND CONFIRMED BY SEPARATE EMAIL. No local pick up offered for items under $100.00 No Credit Cards accepted over the telephone. Accepted thru PAYPAL only. Shipping method is at the discretion of Industrialsuperstore. INTERNATIONAL BUYERS. PLEASE CONTACT INDUSTRIALSUPERSTORE FOR SHIPPING CHARGES. BUYER CHECKOUT IS NOT PERMITTED. WE SPECIALIZE IN INTERNATIONAL SHIPPING! We will ship to your confirmed PayPal address. If incorrect information is provided. Buyer will pay for re-shipment of items. Combine multiple orders to save ... moreon shipping: If you purchase multiple items. You simply pay the highest shipping price, plus take off $5.00 off each additional item. Example: If you won 4 auctions with item shipping $9.99. The total for shipping would be $39.96. However the automatic combined shipping with our shipping discount would be $24.96. A savings of $15.00. The combined total should be figured automatically when you hit the pay now button. If not, simply e-mail us for total. You must make one payment for all of your auctions. Several payments will result in no discount. We are more than happy to ship International Mail by using your UPS account for $20 handling charge. Q.How do I pay you if I don't have a PayPal account? A: You can still pay me without having a Pay Pal account. If you don't have a PayPal account. You'll be automatically redirected to a secure page in eBay checkout where you can enter your credit card information. When you're done, you'll have the option of saving your credit card details with PayPal by creating a PayPal account. Q. I don't want to create a PayPal account. Do I have to pay you with Pay Pal? A. You can pay using your credit card with out creatin
|
|
|
Dupont Instruments Sorvall SW 25.2 Centrifuge Rotor & Buckets w stand 25000 rpm
Dupot Instruments SORVALL model SW-25.2 centrifuge rotor& set of three swinging buckets. With stand. Max 25000 rpm. All components are used and have been maintained in excellent condition. You are bidding on what you see in the picture. The rotor is in mint condition with its stand. Reasonable offers will be considered. All items are warranted for 30 days. Item will be replaced, or money refunded excluding shipping costs. International Buyers Please Note: Shipping will be actual cost. Please contact me prior to purchase to get shipping quote. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 4ffc.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ece4dd392-0xee-
|
|
|
Beckman TH-4 Centrifuge Rotor W/ 2 Carriers, 60 Days Warranty
Beckman TH-4 Rotor and Carriers are in excellent working condition. You will get 60 days warranty when you purchase the items. Please see photos for more details.
|
|
|
2 IEC Solid Brass Centrifuge Rotor Swing Buckets LOOK!!
Up for auction are these used but very nice solid brass IEC centrifuge rotor buckets. Both are 373. 809 grams, 2000 rpm max and measures 2 7/8" wide and 4 3/4" tall. Big pieces of solid brass. Removed from service working great but the centrifuge didn't make it. Please check out my other items because I do combine shipping. Thanks for looking.
|
|
|
Beckman Ultra Centrifuge Rotor TLA-100.2
In near perfect condition. Scientific Information: Payments: out preferred method of payment is PayPal. However. We will accept PO's(purchase orders) from American Universities. Wire transfers are preferred for international customers. Included Items: if it is not pictured. It is likely not included. Please do not assume something is included and ask all questions prior to bidding. Guarantee: our eBay items are guaranteed non-DOA only. Items may need calibration(temperature. Speed, precision, etc. upon entry into the lab. Extended warranties and calibration are availble at additional pricing. Software: buyers are responsible for all license transfers and registrations. If applicable. Contact Information: Powered by
|
|
|
SORVALL INSTRUMENTS 2 ROTOR BUCKET CENTRIFUGE SWINGING SWING BUCKETS
SORVALL INSTRUMENTS 2 ROTOR BUCKET CENTRIFUGE SWINGING SWING BUCKETS GUARANTEED WORKING OR YOUR MONEY BACK! FREE USA SHIPPING! INTERNATIONAL BUYERS. PLEASE CONTACT US FOR SHIPPING QUOTE! SIMPLY ANOTHER ITEM BY You are bidding on a GREAT USED CONDITION: SORVALL INSTRUMENTS 2 ROTOR BUCKET SWINGING CENTRIFUGE BUCKETS as can be seen in the pictures. This listing is for SORVALL INSTRUMENTS 2 ROTOR SWING SWINGING BUCKET CENTRIFUGE BUCKETS. Used. Very good condition. It's in used cosmetic condition with some scratches/scrapes from use. Tested and working PERFECTLY! Photo shown here is the actual item listed. Please examine well the picture carefully before bidding. 100% AUTHENTIC In EXCELLENT OPERATIONAL condition. All ready for your use! MADE IN THE USA! Please review all photos before you purchase this product or contact us with any questions ... moreyou may have. Comes with everything show in the pictures. If you don't see it, then it is not included! Buying Terms: •Do not assume anything. If the description is not clear enough. Please let us know. •Please ask any questions you may have BEFORE buying it. Comes with everything show in the pictures. If you don't see it, then it is not included! This Unit is in EXCELLENT OPERATIONAL CONDITION Item may be returned within 14 days for full credit. FREE SHIPPING TO CONTINENTAL USA! INTERNATIONAL BUYERS. PLEASE CONTACT US FOR SHIPPING QUOTE! International Buyers Shipping Fees: Please Note: We welcome international trade. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up – do not confuse them for additional shipping charges. Esta unidad se enciende y está en buenas condiciones. En definitiva se trata de
|
|
|
SS-34 rotor for Sorvall RC-2 RC-5 Centrifuge Great Condition
Sorvall SS-34 Rotor Clean and Working condition. 8 positions 2000 rpm. Fits for sorvall RC-2. RC-5 centrifuge
|
|
|
Beckman GS-6KR Centrifuge Rotor w/ 2 Buckets GH-3.8
THIS IS A NICE BECKMAN 24006 ROTOR WITH 2 GH-3.8 BUCKETS GOOD CONDITION# Shipping on this item is 21.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of ... morepurchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item10.
|
|
|
IEC 848, Micromax Centrifuge Rotor with Lid - 22 Fixed Place - 2.0 ml
Good IEC Model 848. 22 Fixed Place(2.0 ml) Micromax Centrifuge Rotor with Lid. Free Shipping!
|
|
|
IEC Centra CL2 Benchtop Centrifuge 236 ROTOR w/ 2 129.0 and 2 104.0 GMS Cups !K
IEC Centra CL2 Benchtop Centrifuge 236 ROTOR w/ 2 129.0 and 2 104.0 GMS Cups!K IEC Centra CL2 Benchtop Centrifuge 236 Rotor w/ 2 129.0 and 2 104.0 GMS Cups The Centra IEC CL2 Centrifuge Rotor came from a local lab going through upgrades. This rotor is in good physical and cosmetic condition with minimal signs of wear and tear consistent with normal use. Comes With: Centra CL2 236 Rotor 2 Centra CL2 129.0 GMS Cups 2 Centra CL2 104.0 GMS Cups Comes Only With What Is Pictured Or Described We Have more Medical/Lab/Test Equipment Available Contact Us Soon To Find Out More! Please Read Description Carefully and Ask All Questions Prior To Purchasing! For any questions please contact us at(443) 393-3370 and ask for Aleksandr. DISCLAIMERS Regardless of the origin of the equipment. Documentation provided or identification appearing upon the equipment, ... morethe equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices. You should consult with the FDA's Center for Devices and Radiological Health: http:www.fda.gov/cdrh/devadvice/ or l We Ship or USPS We Accept Paypal Please make payment arrangements within 4 days of the end of the auction. If payment is not received within 5 days of the end of auction. An Unpaid Item Dispute will be filed, and
|
|
|
$15,300 Value Beckman VTi65.2 Titanium Centrifuge Rotor
$15.300 Value Beckman VTi 65.2 Titanium Centrifuge Rotor This Beckman VTi 65.2 titanium ultracentrifuge vertical-tube rotor is used. But it has been maintained in absolutely perfect condition. The rotor accepts up to sixteen 13 mm diameter tubes. Full details on the recommended polyallomer tubes are available from Beckman. The rotor is rated to 65.000 r.p.m.and 416,000 g. According to Beckman, major applications for this rotor are isopycnic and rate-zonal centrifugation of small particles. Accompanying the rotor is a selection of tube adapters/spacers. Lubricant, and a torque wrench. Full details on this rotor are available direct from Beckman. SAVE OVER $10.000 COMPARED TO PURCHASE OF THE SAME ROTOR, NEW! ANTICIPATE SPENDING US$15.300 FOR A NEW ROTOR OF THE SAME SPECIFICATION! CHECK THE PRICE WITH THE MANUFACTURER MADE IN THE USA ANTICIPATE ... morePAYING OVER $130 FOR A CONDENSER OF THE SAME SPECIFICATION! CHECK THE PRICE WITH- Guaranteed positive feedback for a successful transaction Satisfaction 100% Guaranteed! No need to wait for the auction to finish More XXXXXXXXXXX are available at the Createc Liquidation Store- ADDITIONAL ITEM INFORMATION The rotor is used. Purchases from international sources are welcome. Additional items of this type are available. And details have been posted to eBay. AB GENERAL INFORMATION We will always describe the item as accurately as possible. We are not responsible for any injury or damage caused through use of the item(s) We cannot be held responsible for any misuse of the item(s) We are anxious to maintain our reputation as a trusted seller. And customer satisfaction is our number one priority. We will be happy to leave positive feedback once we know the item(s) has/have been received, and we know that you are happy with your purchase. Contacting Us If you would like further details regarding the above described lot. Send e-mail, and someone will reply as soon as possible. Payment Mailing& Shipping Generally. We do not mail or ship items based on a flat rate charge. This sa
|
|
|
Beckman F1802B 18/36-place Fixed 18x1.5/2.0 ml Lab Microfuge Centrifuge Rotor
Reference No. 61894 Please use this number in any correspondence. Click For More And Larger Pictures Beckman F1802B 13000rpm 18/36-place Fixed-Angle Centrifuge Rotor, Links- Quantity, This auction is for one centrifuge rotor. Description, We have no specifications or other data. See pictures for additional information. Tests, It is untested but it was removed from working equipment. Condition, It is in good physical condition. Shipping, Local pick-up is allowed. Otherwise the buyer must pay actual shipping& handling. The eBay calculator above uses actual rates from the carrier, based on ZIP code. We will ship this item USPS Priority Mail or UPS Ground. Please contact us for expedited shipping. It weighs 2 lbs before packaging. Returns, It is being sold with a 14 day return option. It can be returned for a refund less shipping if we are ... morenotified within 14 days of delivery. Payment, Payment must be received within 7 DAYS or item may be resold. Items must be picked up within 14 days after the end of the auction or the item will be considered abandoned. California residents and pick-up customers must pay sales tax. We accept Paypal only. Anything not in the pictures or description is not included. DEF. Terms We respond to all eBay messages within 24 hours. Excluding weekends and holidays. If you don’t receive a response, there is a problem. If you won one of our items, our contact email and phone# are available via eBay. If you are the winning bidder/buyer on any of our items. ALL messages and emails that we send will go to the email address you have registered with eBay. If your email address is not working or has changed, please make sure it is correct BEFORE bidding. Per eBay rules, it is the buyer’s responsibility to ensure that the email address, shipping address, and phone# with eBay are correct, since that is what eBay sends to the seller as soon as the listing ends. We are a surplus dealer. And not experts on anything we sell. We do our best to honestly describe the items we sell, and never deliber
|
|
|
SORVALL CELLWASHER 2 BLOOD CELL WASHER CENTRIFUGE W/ ROTOR - TESTED FUNCTIONAL!
Hello. Thank you for visiting our store. Please read everything before placing bid or making purchase. Feel free to e-mail us with any questions. Good Luck! ITEM BEING OFFERED: SORVALL CELL WASHER. MODEL: CELLWASHER 2 The Cellwasher 2 is designed to perform the washing phase of the Comb's Procedure automatically. In normal AUTO mode operation. After placing two or three drops of a pre-prepared 2 to 5% red blood cell/saline suspension* into each tube, the Cellwasher 2 will automatically add saline, spin at high speed to concentrate the cells, decant the saline, and agitate to re-suspend the washed cells for the addition of Comb's reagent. The Cellwasher 2 is also capable of being used manually as a low speed centrifuge, spinning at either of two preset speed ranges(LOW speed or HIGH speed mode. See Cellwasher 2 Specifications on next ... morepage) The Cellwasher 2 combines a peristaltic saline pump and a wet chamber centrifuge in one cabinet. The centrifuge portion uses a dedicated DA-12 Rotor. Which is a unique dual-angle swinging bucket rotor that is designed to accommodate up to 12 each of either 3 ml or 5 ml tubes. The Cellwasher 2 is microprocessor controlled, featuring a front control panel with sensor-touch keys and a digital timer for the wash cycle. Other features include a saline-detect system with an audible low-saline warning, and an agitate cycle that ensures complete resuspension of cells and eliminates manual agitation. Specifications: Depth. 35.6 cm(14.0 inches) Width. 31.8 cm(12.5 inches) Height: Lid closed. 36.8 cm(14.5 inches) Mass(Weight) 16.4 kg(36.0 lbs) Motor Type: 3-speed induction Electrical Supply. 120 V ± 10% 60 Hz. 5 A INCLUDE
|
|
|
30,000 RPM Centrifuge Rotor 1535 30.2 ser 307
Product Description 30.000 RPM Centrifuge Rotor 1535 30.2 ser 307 This centrifuge rotor takes up to 20 vials each 14mm in diameter. The rotor's overall diameter is 20 cm. How the unit was tested: This unit has not been tested. This auction includes the following items only: One 30.000 rpm centrifuge rotor 1535 30.2 ser. 307 No Other Testing has Been DONE On this item Item Is Sold AS IS Auction Information Auction Sales Policy: PLEASE DO NOT BID IF YOU DO NOT INTEND TO PAY. Make US an Offer On Any Of Our Listed Auctions. We are a consignment seller and all items on auction are consignment items. By placing your bid on any of our items/auctions you must have fully read and agreed with all our terms and conditions on our ABOUT ME PAGE. Items cannot be combined with our other items. Exceptions can be made if emailed before items is purchased. ... moreW e will not be responsible for any misdirected mail. we recommend insured registered shipping on all items(Extra charges will be apply for insured shipping) When using UPS please include phone number with Paypal payment. Shipping Details: Shipping& Handling Charges for this item Country Service Available Shipping and Handling Costs For This Item Canada Canada Post Expedited Parcel See Shipping Tab USA Canada Post Expedited Parcel See Shipping Tab International UPS Shipping ONLY Please email us for Rates before purchase Payment Details: We will accept Paypal(confirmed paypal mailing address only. No local pickup) At the end of an auction we will email you within 48 hours. You must then reply with confirmation within the same period. Purchaser is responsible for all Customs. Cross Border, Duties and Brokerage Fees. Payment is expected to be received within 5 days after close of auction. If there is a problem. Please contact me before bidding. Canadian Resident must Add GST 5% on final cost* F inal cost includes total amount + Shipping/Handling and other charges News Letter: Sign up for our news letter and receive special offers and exclusive discounts. Returns: Please con
|
|
|
Sorvall Cellwasher Centrifuge Rotor (#04100), Blood, Cell Washer 2, D6-MH@063
This listing is for a Sorvall Cellwasher Centrifuge Rotor(04100) for Cellwasher and Cellwasher 2 systems. If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Beckman VTI-65.2 65,000 RPM Centrifuge Rotor
Beckman VTI-65.2 65.000 RPM Centrifuge Rotor This auction is for a USED Beckman VTI-65.2 65.000 RPM Centrifuge Rotor. We have no way of fully testing this rotor so it has to be sold"as is" with a no return policy. It arrived to us with other working centrifuges but we do not have one to test this rotor with. Overall it is in good physical condition with a few minor scratch and scuff markings. The various pictures provided will give a better detailed view of the rotor. No other parts or accessories will be included in this auction. Only what is pictured. Bid accordingly. This Auction is one of many items we have coming out of our asset recovery department everyday. If you happen to have an issue with an item. Such as missing parts or pieces that are mentioned as being present or shown in the pictures as being present and that are ... morenot included in your order please contact us direct. Please do not assume something to be included in this auction. Such as something that is not shown in the pictures or something that is not mentioned to be included. About Us/ Policies: We do our best to give an honest and fair presentation of all items that are listed. We are an asset recovery and re-marketing company and most of this equipment has just come from corporate leases. As a result. Most items that are being sold are not things we have owned for any considerable amount of time or used thoroughly. We have no technical experience in this field of equipment. We are only capable of plugging an item in to see whether it power's or not. Thus, we may not always know the exact condition of a piece of equipment or be able to attest to its complete operational status beyond this point. Please bid accordingly. No cables. Powering cables, or manuals will be shipping with this equipment unless otherwise stated above. Shipping/ Packaging/ Handling/ Insurance Charges: A $27.00 Flat fee will cover the shipping/ handling/ packaging fee of this Beckman VTI-65.2 65.000 RPM Centrifuge Rotor to any location within the mainland of t
|
|
|
2 Centrifuge Rotor Adapters 1 X 16mL for Round Bottom Tubes
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE For sale is a used pair of centrifuge rotor adapters. Each accommodates one 16ml round bottom tube. OD is 38mm. Overall length is approx. 100mm. There are no identifying manufacturing marks…possibly Highconic? Each adapter has a manufactured thin“slot” on the outer diameter that runs the length of the tube. In good used condition. Normal 0 false false false EN-US X-NONE X-NONE We make every attempt to describe the item correctly and provide pictures for your review. If you have any questions. ... morePlease email us before you buy. We are happy to combine shipping when feasible; click on the“Red Door” icon to enter our ebay store for more great deals! We are using the eBay shipping calculator to offer a fair shipping cost to this item. To make sure you are getting an accurate quote via the eBay shipping calculator. Make sure your zip code is the default zip code when calculating the shipping cost for this item. We accept Paypal. For your security, we reserve the right, but are not obligated, to ship only to your PayPal Confirmed Address. Changes to payment methods. Expected payment dates, shipping method or price of shipping and handling cannot be negotiated after you have bought this item. Loc3)3116 We welcome international trade. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark m
|
|
|
R101793 Lot (2) Eppendorf 5415C Benchtop Centrifuge w/ Rotor
R101793 Lot(2) Eppendorf 5415C Benchtop Centrifuge w/ Rotor(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R101793 This Lot(2) Eppendorf 5415C Benchtop Centrifuge w/ Rotor appears to be in fair cosmetic condition with signs of previous use and wear. I was able to power them on. Get them to spin and change speeds. I also tested the timer and they appear to be functioning properly. The top of one centrifuge is missing and also a knob on one. However, I lack the knowledge or equipment to test ithem further, so due to little testing, they are being sold as-is. Please see photos for more detail. they do not come with a power cord. Power cords shown are for testing only. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it ... morein the photos. It is not included. The approx. unpacked size of the system is 16"x12"x11" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $33.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 28.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales a
|
|
|
Lot of 2 Sorvall Instruments PN 11725 Centrifuge Rotor Bucket Cover
1-888-9WEC2IT(993-2248) Problem? Lot of 2 Sorvall Instruments PN 11725 Centrifuge Rotor Bucket Cover. Item Description. Manufacturer Sorvall Instruments, Model Number PN 11725, Category Lab Equipment Centrifuge Parts/Accessories, Cosmetic Wear Light wear from routine lab use. Functional Condition Items are in good working condition. Items Included In Listing Two(2) rotor bucket covers. As shown. RNF113. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
Eppendorf 5416 Microplate BUCKETS for 16M 2/MT Rotor - Centrifuge, nice, clean.
Eppendorf 5416 Microplate BUCKETS for 16M 2/MT Rotor- Used once. Nice, clean. Shipping charge to 48 US contiguous states only.
|
|
|
BECKMAN VTI 65.2 CLASS H 65,000 RPM CENTRIFUGE ROTOR
THIS IS A BECKMAN VTI 65.2 CLASS H 65.000 RPM ROTOR SERIAL NUMBER 543. Shipping on this item is 32.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item17. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13ff1bd59bd-0xfb-
|
|
|
Beckman SW 25.2 Centrifuge Rotor 25K RPM - no buckets
SquareTrade © AP6.0 Beckman SW 25.2 Swing Bucket Centrifuge Rotor. 25.000 max RPM. Good condition. NO BUCKETS INCLUDED. BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! NO PO BOXES Please Note: This item can not be shipped to PO Boxes so if your Paypal address is a PO Box then we can NOT ship to you. We will only ship to the address that you have on file with Payal which cannot be a PO Box. We will NOT ship to alternate addresses that are put in the"notes" section of a payment. We Ship Fast! All items are shipped withing 48hr.s of receiving payment. Excluding weekends. Most items are shipped within 24hrs! BY PURCHASING. YOU ACKNOWLEDGE THAT YOU HAVE READ, UNDERSTOOD, AND AGREE TO THE TERMS OUTLINED BELOW We ship to the 48 Contiguous U.S. States Only TERMS OF SALE: Ships to the Continental U.S. only. Shipping. Handling and Insurance ... moreis FREE. Items paid via Paypal are sent to the shipping address that is provided to us by Paypal. NO EXCEPTIONS! Guaranteed to power on. Otherwise sold as is(unless it is stated in listing above that it is offered as is, untested and as is, non working or for parts or repair) No other warranties expressed or implied. Consumable items such as bulbs and batteries are NEVER guaranteed. In the unlikely event a return is necessary, return shipment is the buyers responsibility. Shipping charges are not refundable. All items are used unless otherwise stated in listing. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Beckman VTI 65.2 Centrifuge Rotor, Nice!
Beckman VTI 65.2 Centrifuge Rotor For sale- a Beckman VTI 65.2 Centrifuge Rotor. I believe this series is made of titanium to withstand higher speeds. In this case a max of 65,000 RPM. I’m afraid I don’t know the application of this rotor. Either in terms of the Beckman centrifuges it fits or the size of the tube it will spin. Obviously it will handle 16 of them and I see another seller assert the capacity to be 5.1ml. Which sounds about right. It isn’t a very large hole. This thing is in excellent physical condition. I wiped it down and I didn’t discover any nicks or dings worth mentioning. There are some minor cosmetic imperfections. But as far as I could tell all were confined to the surface finish, and didn’t penetrate into the metal itself. So all things considered a very nice rotor that should have a lot of life left in it. Class H.R. ... moreWhatever that means. Serial number 1498 if that tells you anything. Please check out my for more interesting lab. Test, and optical equipment, including a variety of centrifuges and rotors. Check back often! Sold as is. As described, as pictured. Potential buyers are asked to please make sure you have read the listing carefully. And understand what you are buying. Ebay’s condition codes for used items. Which I am now required to select from, might imply a degree of functionality that my limited time, knowledge, and facilities do not allow me to ascertain. If the functional condition of the item is known it will be stated as such in the listing. Unless a warranty is specifically offered returns are not accepted regardless of any implied functionality. You are also encouraged to visit my“ ME” page. Where my terms, conditions, and philosophy of doing business are outlined. I don’t think anything there is outside the bounds of normal e-commerce. But they are binding on the transaction. Payment is expected within 7 days of the close of the sale and I need to hear from you within 3 days to confirm the transaction. Please add $18.99 for shipping anywhere in the continental US. In
|
|
|
Beckman SW 25.2 Swing Bucket Centrifuge Rotor. 25,000 max RPM. FREE US SHIPPING
Beckman SW 25.2 Swing Bucket Centrifuge Rotor. 25.000 max RPM. Good condition. NO BUCKETS INCLUDED
|
|
|
EPPENDORF A-2-MTP WINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR
EPPENDORF A-2-MTP WINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR Description-RP Inventory Location: MF 12-3 This auction is for an EPPENDORF A-2-MTP WINDSHIELD DROP ON LID FOR 5430/5430R CENTRIFUGE ROTOR THIS AUCTION IS FOR THE LID ONLY Unfortunately the Ebay shipping calculator can often overcharge for shipping especially on smaller items. Please feel free to contact us for an accurate shipping quote or request an alternate shipping method. We ship FedEx and USPS as well as UPS. We will also be glad to ship against your UPS or Fedex account. We combine shipping costs wherever possible. Ready to be shipped: For the most accurate information please look at the pictures provided. All items that have been listed. Have not been tested. We try to the best of our ability to describe the physical appearance and to provide an accurate description ... moreof each item that is being sold, but please refer to the picture or attached PDF if there is one available for a better description. The item you receive may be different from the actual item in the photo because some lots are multiple quantities of the same item. All measurements(lengths, widths, diameters) may not be exact so contact us if you want to ensure an exact measurement. A ll items are sold as is. Untested, with absolutely no warranty or return. If you do not agree to the sale under these conditions please do not purchase the items. If you have any questions please contact us for more information. Our goal is to provide the purchaser with as much information as possible. Payment We accept the following forms of payment: Pay Pal. Credit Cards, or E-check through pay pal. We do not ship C.O.D. and items will only be shipped when an E-Check has been confirmed and not pending. A Credit Card Purchase is only shipped when the money is transferred from the Credit Card Processing Company to our banking account. Shipment Payment is mandatory within 5 business days of auction close. Packages will be shipped UPS Ground and or FED EX economy class. If special shipping
|
|
|
IEC Centrifuge 921 Rotor Trunnions 2 / 89 Shields 10 - 90 EG
IEC Centrifuge 921 Rotor. Trunnion- 2/89 | 95.5 grams. Shields- 10-90 Cat. 302. Free Pickup Delivery available for 200 mile radius Freight quote available within 48 hours. All items are sold as is/ for parts. Units are not tested for working condition. Buyer must ask all questions before bidding and/or buying. Item has been cleaned and handled in accordance with the manufacturer's instructions. Buyer is responsible for all shipping. Packaging and/or freight charges. Large items will require a freight quote request. Requests will be processed within 48 business hours. Items are located in Holly. Michigan. Items may be picked up for no charge. Delivery is available for most items within 200 mile radius of Grand Blanc, Michigan for a fee. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state ... moreand local regulatory agencies. You must be an authorized purchaser. If the item is subject to FDA regulation. I will verify your status as an authorized purchaser of this item before shipping of the item. Regardless of the origin of the equipment. Photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyer’s responsibility to have this item professionally tested and certified by an authorized technician prior to use. Amy's Bubbling Boutique Grand Blanc. MI 48439 48439 810-584-5772 On Jan-16-13 at 17:43:29 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
2 IEC trunnions for Centrifuge Rotor Adapters, Trunnion Ring, Carrier ss@213
This listing is for 2 1 place IEC trunnions for thermo IEC centrifuge rotor adapters. The pins are 9.5 mm in dia. Openings for the holders each measure 19.6 mm ID Appear used. Excellent condition. If not satisfied for ANY reason. Send it back within 60 days for a refund. Please see our other listings since we combine shipping. Thank you for your interest!
|
|
|
Beckman Centrifuge Rotor 50.2 TI 50000 RPM
For sale is a used Beckman twelve(12) Position 50.000 RPM fixed angle centrifuge rotor, model 50.2 TI. This item is in very good condition except for some outer surface scratches and a few small dings. This rotor is designed for the F-G-H classes only. If you have any questions feel free to contact me. Thank you for looking.
|
|
|
HERAEUS HFA 22.2 Fixed Angle Centrifuge Rotor for Sepatech/Contifuge Centriffuge
H eraeus HFA 22.2 Fixed Angle Centrifuge Rotor Features: 18 Place. 22,000 rpm, Model# 3042. For use in Heraeus Centrifuges. USA Customers Items are shipped within three business days after payment is received. Items are shipped through USPS.UPS or freight. Freight shipment maybe up to five business days. Shipping price includes shipping and handling fees unless otherwise stated. Shipping rate provided is for all 48 contiguous states. Unless stated otherwise. There is a shipping surcharge to items shipped to Alaska. Hawaii and Puerto Rico. Combined Shipping discount is available. Which is based on number of items purchased and shipping weight. International Customers Items are shipped within four business days after payment is received Customers/Buyers are responsible for any customs duties. Taxes, tariffs or any other charges as such on items ... morebeing shipped from a foreign country. I determine which shipping company ships the merchandise by cost and location. Unless customer requests otherwise. In such case, customer/buyer would be responsible for any additional cost and requirement by courier service. Shipping price includes shipping and handling fees unless otherwise stated. Once an item is shipped I would provide tracking number or custom form number. I would not be responsible for any lost or damage item. Once item leaves the US, courier doesn’t have control over your local customs or shipping companies. Combined Shipping discount is available. Which is based of number of items purchased and shipping weight Shipping and Return Policies Expedited Shipping is available if you need it. You are responsible for the extra charges(shipping and handling) All items are packaged and shipped in a professional manner. All returned items must be returned in original conditions as was received. No returns will be accepted without prior authorization. The customer assumes responsibility for the package until it is delivered to us. The buyer is responsible for all shipping charges i.e. cost of shipping the merchandise to y
|
|
|
Centrifuge Rotor bucket Heraeus 2-green single tube & 2-white 4 tube! #1544-9b
Centrifuge Rotor buckets Heraeus 2-green single tube& 2-white 4 tube! 1544-4c On Nov-28-12 at 23:05:18 PST. Seller added the following information: Your own return desk 24/7 Powered By PhiConnect.com
|
|
|
Lot of 2 Beckman Rotor Insert Swing Bucket Adapters Centrifuge 60 Tube Capacity
Here is a Lot of 2 Beckman Rotor Insert Swing Bucket Adapters Centrifuge with 60 Tube Capacity. It measures approx 3 3/4" x 4" Not cracks or abnormal wear noticed. What you see is what you will get. Feedback is a huge issue for sellers. The new rules of ebay make the detailed feedback(the stars) as important as whether the feedback is positive or not. By giving a seller 1 or 2 stars in any area you may cause him/her additional expenses on ebay fees of hundreds of dollars a month for a long period of time. I try my best to describe items accurately. Answer all questions timely, pack and ship your item safely and quickly with the least cost to you. So PLEASE contact me before leaving a less than perfect feedback to discuss any problem. We try to be perfect but sometimes fall short but we want to make it right. COMBINED SHIPPING: We ... moreoffer a shipping discount for multiple purchases by one buyer. Please wait for a combined invoice with a shipping discount on it before paying. Ignore the first invoice that Ebay sends automatically) The shipping discount is located at the bottom of the invoice. NOTE: Most items I list are from local estates and often I have limited(or virtually no) expertise in that area but I try my best to describe them. Please email with helpful info anytime. I strive to be a fair and honest seller and appreciate buyers that are the same. Any letters you see at the start of the title with( is for internal bookkeeping purpose so please ignore. You will receive a positive feedback as soon as you pay for item. Please allow me the opportunity to fix any problem and avoid a negative feedback. Errors happen. It is what you do about it that makes the difference. Happy customers are good for business so my goal is to make sure that you are happy. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Beckman centrifuge rotor with 4 buckets 2 tube holders
View my Other Auctions EMAILS answered M-F 8-5 MST SHIPPING TERMS: We use UPS ground service for delivery in the lower 48 states. International customers We use USPS Priority for international delivery. International customers click here for shipping guidelines Shipping fees listed on all auctions via cost calculator for international and domestic. All packaged items include 2" of bubblewrap and/or foam if applicable. Freight Delivery: In Most cases. We will palletize for free. Any crating would be subcontracted. We have forklift loading. We also have local pick up. For larger, heavier items customer is required to make arrangements. We can also get a freight quote for you, and/or ship on your account. If you have any questions about our freight shipment guidelines. Or to get a quote don't hesitate to contact us. Returns Policy: ... moreitems sold"as is" have no return. No warranty& no guarantee. AS IS items are not covered by return policy. These sales are final. Southwest Liquidators does not warranty the item in AS-IS auction/store in any way. No refunds. These statements maybe used as an evidence for PayPal dispute or chargeback. DOA means dead on arrival For items with a guarantee. no guarantee unless stated otherwise) items must be returned within 15 days Item must be in original shipped condition(not modified. Not missing parts) Contact us before returning any items Items that are returned more than 15 days after delivery will receive No refund. Buyer is responsible for return shipping charges if applicable. Shipping charges are directly quoted from the shipping company. Please consider these costs when intending to purchase an item. We sell mostly USED Industrial Equipment. Please email us with any questions or if the description is unclear to you. This rotor came out of a Beckman centrifuge. I believe it is a TH-4 but I do not see it marked TH-4 anywhere on the rotor. It does have a serial number 16420 made in U.S.A. The 4 buckets are marked 545g 7-98. The tube holder has 18 places. The un
|
|
|
BECKMAN VTI 65.2 CLASS HR 65,000RPM CENTRIFUGE ROTOR NICE
THIS IS A NICE BECKMAN VTI65.2 CLASS HR 65.000RPM ROTOR SERIAL NUMBER IS 90E2212. Shipping on this item is 35.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item20.
|
|
|
CENTRIFUGE ROTOR 50,000 RPM TYPE 30.2 TI
THIS ITEM IS USED. THIS ITEM IS SOLD AS IS. 50. 000 RPM Type 30.7 TI Item has some wear and tear but in good condition. Cover has a little more cosmetic wear and tear than anything. If you have any other questions or you would like some additional pictures please message me and I will help you the best I can! Thanks
|
|
|
BECKMAN 50.2 TI 12 POSITION 50,000 RPM FIXED ANGLE CENTRIFUGE ROTOR
BECKMAN 50.2 TI 12 POSITION 50.000 RPM FIXED ANGLE CENTRIFUGE ROTOR Description-RP Inventory Location:UF1 12-2 This auction is for a BECKMAN 50.2 TI 12 POSITION 50.000 RPM FIXED ANGLE CENTRIFUGE ROTOR Ready to be shipped: For the most accurate information please look at the pictures provided. All items that have been listed. Have not been tested. We try to the best of our ability to describe the physical appearance and to provide an accurate description of each item that is being sold, but please refer to the picture or attached PDF if there is one available for a better description. The item you receive may be different from the actual item in the photo because some lots are multiple quantities of the same item. All measurements(lengths, widths, diameters) may not be exact so contact us if you want to ensure an exact measurement. A ll items ... moreare sold as is. Untested, with absolutely no warranty or return. If you do not agree to the sale under these conditions please do not purchase the items. If you have any questions please contact us for more information. Our goal is to provide the purchaser with as much information as possible. Payment We accept the following forms of payment: Pay Pal. Credit Cards, or E-check through pay pal. We do not ship C.O.D. and items will only be shipped when an E-Check has been confirmed and not pending. A Credit Card Purchase is only shipped when the money is transferred from the Credit Card Processing Company to our banking account. Shipment Payment is mandatory within 5 business days of auction close. Packages will be shipped UPS Ground and or FED EX economy class. If special shipping requirements are needed this will be done on a case by case basis. It is not our standard practice to ship outside of North America. But special arrangements can be made. We can also ship packages using purchasers shipping account through FED EX or UPS the Purchaser has to supply the account information and a handling fee will apply. Buyer will pay actual shipping& handling costs which will be fig
|
|
|
DuPont Sorvall GSA Centrifuge Rotor 6 Position Fixed Angle Rotor 13000rpm Max #2
Used Lab Equipment Tested Working 30 Day Warranty for More Information Please Visit Our Web Store or Call Us at 734-855-4890 or 734-564-5952(cell) PRODUCT INFO Title DuPont Sorvall GSA Centrifuge Rotor 6 Position Fixed Angle Rotor#2 Stock# A2259007A Asset# 368295-2 Manufacturer Sorval Model GSA Serial# 931131 Warranty 30 day warranty Service or Questions Contact Sales@RenewedEquipment.com 734-564-5952 Price $899.00 CONDITION Working Condition Working Cosmetic Condition Some wear DIMENSIONS Outside Dimensions 12.5" Diameter x H 8" Inside Dimensions 6 positions@ 61.5mm SHIPPING Item Weight 33 lbs Shipping Weight 38 lbs Shipping Size 16 x 16 x 12 Shipping USA $49.00 Shipping Canada $99.00 Shipping International $249.00 The above used Lab equipment includes only what is pictured and has been described honestly. Please review all photos ... morebefore your purchase or contact us with any questions you may have about this listing. For technical support. Questions, or issues please email: sales@renewedequipment.com or Call Dave: 734-855-4890 Cell: 734-564-5952 Item located in our 20.000 Sq. Ft. Facility Renewed Equipment 11730 Globe Street Livonia. MI 48150 734-855-4890.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14061553baa-0x108-
|
|
|
BECKMAN NVT 65.2 65,000 RPM CENTRIFUGE ROTOR 16 X 5.1 mL
Thanks for Choosing MoliMedic! Equipment condition: All of our equipment is used unless otherwise noted. Expect the equipment to have standard wear due to use. We include pictures of each equipment individually to better display cosmetic condition. Please review the pictures carefully as to avoid any confusion or dissatisfaction with your purchase. However. Knowing that the equipment is used GETS YOU THE BEST POSSIBLE DEAL! Take advantage and place your purchase now! Our Worry-Free Warranty: Should you not be happy with the equipment purchased. Please let us know within 14 days of the equipment’s arrival to you. We will offer a full refund(customer-provided shipping) Every part on this item has its own authentication label. If authentication label is removed or damaged refund will not be issue. What is included with the Purchase? BECKMAN ... moreNVT 65.2 65.000 RPM CENTRIFUGE ROTOR 16 X 5.1 mL!SOLD AS-IS! Shipping: We usually ship items within 24-48 hours of payment. However, please allow for 3 business days for items to be processed and shipped. We kindly ask that payment be made within 48 hours of auction ending. Thank you! Customer Service: We answer all emails and eBay messages Monday-Friday 9:00AM- 6:00PM. Please be patient until we can respond. We try to respond within 3 hours. But please allow up to 24 hours. Feedback: Customer satisfaction is our top priority! We strive to offer you the best value and service possible. Our goal is for you to be completely satisfied with this transaction. If this is not the case. We would appreciate it if you would first contact us via"contact seller" to give us a chance to address your concerns before leaving negative or neutral feedback; we promise to resolve any issues you may have with the purchase. If you've had a pleasant buying experience, we would be grateful if you could take a moment to leave us a positive feedback and 5 star rating. We typically leave positive feedback the same day item is shipped. Returns: Returns are accepted on defective equipment which
|
|
|
2 Beckman Centrifuge Rotor JS-5.2 microplate carrier JS-4.0 micro plate
A gently used set of two Beckman centrifuge microplate carriers for JS-4.0 or JS-5.2. Rubber pad on the bottom. Up to 3 standard microplates per carrier to run Please look at the other items featured in the store. I will combine shipping on the total order. Lot ulstfrbot
|
|
|
Sorvall HL-4 Rotor w/ 2 Sorvall 50mL Tube Collars Cat No 513 (Centrifuge HL4)
Welcome to Labb Surplus! We carry all types of Hi- Tech. Medical and Laboratory Surplus at bargain prices. Our Business is one of the largest and most diverse in Houston. Our stock is comprised of gently used items from State Universities. Hospitals and Government Institutions. 1-USED Sorvall HL-4 Rotor w/ 2 Sorvall 50mL Tube Collars Cat No 513(Centrifuge HL4) Rotor Came From Sorvall General Laboratory Centrifuge(GLC-2) Unit Powers Up& Appears to Function Properly Came from working environment Only what is pictured/in description is included This unit is surplus from a local university hospital 30 Day No DOA Guarantee limited to item powering up. Does not include calibration, or other maintence type issues ~ Guarantee is void if security features are removed or tampered with ~ Please contact us for any questions or information! Debby ... moreMario(530) 383-0671(281) 300-6104 SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. SHIPPING INFORMATION SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. ALL ITEMS SOLD AS-IS. SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. Labb Surplus recommends shipping LARGE ITEMS( Over 120 Lbs. to a commercial location with unloading capabilities to get the best possible rate. If this item must be shipped to a residential address we can do so. However, the freight company charges more for this do to the fact a lift gate truck is required. When needing a quote for shipping please include the following. Commercial or Residential address Ebay item number Zip code of where the item is to be shipped Phone number Shipping Instructions: Shipping and handling included in shipping calculator when using Ebay's Shipping tool. Due to the fragile nature of scientific and laboratory items. We use a professional packing service to insure the highest quality packing available. Do not try to negotiate shipping rate after the end of the auction as emails requesting a change after the end of the auction will NOT be answered. Shipping of items over 100 Lbs: Labb Surplus will determine which items should be shipped fr
|
|
|
2 Sorvall/ Dupont Tabletop Centrifuge Rotor Bucket Adapters, 35 place ss@231
This listing is for 2 Sorvall/ Du Pont Centrifuge Rotor Buckets 35 place adapters. Used. Good condition. Very good cosmetic condition! 2 Sorvall Rotor adapters: Holds up to 35 tubes, If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Beckman Ultracentrifuges Rotor TYPE 42.2 Ti ROTOR Centrifuge 72 x 230 µL
Beckman Centrifuge Rotor TYPE 42.2 Ti ROTOR Used In Beckman Coulter Class G. H, R, and S Preparative Ultracentrifuges SPECIFICATIONS Maximum speed. 42 000 rpm Density rating at maximum speed. 1.2 g/mL Relative Centrifugal Field* at maximum speed At r max(113 mm) 223 000 × g At r meniscus(106 mm. 175 μL) 209 000 × g At r meniscus(104 mm. 230 μL) 205 000 × g k factor at maximum speed. 12 Conditions requiring speed reductions. see RUN SPEEDS Number of tube cavities. 72 Available tubes. see Table 1 Nominal tube dimensions. 7 × 20 mm Nominal tube capacity(largest tube) 230 μL Nominal rotor capacity. 16.5 mL Approximate acceleration time to maximum speed(fully loaded) 15 min Approximate deceleration time from maximum speed(fully loaded) 15 min Weight of fully loaded rotor. 7.2 kg(15 lb) Rotor material. titanium Reasonable offers ... morewill be considered. All items are warranted for 30 days. Item will be replaced, or money refunded excluding shipping costs. International Buyers Please Note: Shipping will be actual cost. Please contact me prior to purchase to get s
|
|
|
Beckman TH-4 Centrifuge Rotor W/ 2 Microplate Carriers, 60 Days Warranty
Beckman TH-4 Rotor and Microplate Carriers are in excellent working condition. You will get 60 days warranty when you purchase the items. Please see photos for more details. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-140f823af57-0xf2-
|
|
|
Set of 2 Beckman Centrifuge Rotor Swing Bucket Adapters Orange
beckman_orange_set_of_2_centrifuge_swing_bucket_adaptors Set of 2 Beckman centrifuge swing bucket adapters for the Beckman 7-89 swing bucket. With 24 slots per insert. NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 311226, Manufacturer: Beckman, Model Number: Orange, Description: Set of 2 Centrifuge Swing Bucket Adaptors, Made in: United States, Weight: 5Lbs, Condition: In use when removed, Cosmetic: Very Good, Have questions regarding this product? Contact us: ebay@biostad.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves the ... moreright to open an unpaid auction request.Unless otherwise notified) All Items are subject to a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Sorry. We will not ship post mail. USA: A Minimum shipping charge of $25.00usd will be applied to all auctions. Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping ter
|
|
|
Heraeus Sepatech 1378 Centrifuge Rotor for 24 x 1.5 & 2.0 ml Tubes
Heraeus Sepatech 1378 Centrifuge Rotor for 24 x 1.5& 2.0 ml Tubes. The rotor comes as pictured. And does not include a lid.
|
|
|
BECKMAN COULTER JA-10 CENTRIFUGE ROTOR 6X 500ML 10,000 RP FOR J2/J6 +AVANTI J #2
BECKMAN COULTER JA-10 CENTRIFUGE ROTOR 6X 500ML 10.000 RP FOR J2/J6 +AVANTI J#2 Description: PLEASE READ BEFORE PURCHASING ASK ALL QUESTIONS THROUGH EBAY MESSAGES BEFORE PURCHASING TO AVOID ANY CONFUSION. EXACTLY what is pictured is included. If it is not pictured. Assume it is not included. IF YOU RECEIVE YOUR ITEM AND IT IS NOT TO YOUR 100 PERCENT SATISFACTION. CONTACT US BEFORE LEAVING FEEDBACK! We strive to make sure every transaction a positive one! CONDITION OF ITEM IN THIS LISTING IS:2 This is a used rotor in good condition. It is a 6 position high speed rotor for Beckman Coulter J2. J6 and Avanti J series Centrifuges. With the correct adapter this can also use 250mL or 50 mL tubes as well. The item condition numbers and their definitions are below: 1. NEW 2. I guarantee this item to fully work or I will send you a full refund within ... moreseven days of you receiving the item. 3. I guarantee this item to power on. I have not tested the functionality of this item. If it does not power up. I will send you a full refund. Beyond that, no refunds will be offered. 4. Unable to test due to lack of knowledge or inappropriate power source. This item is sold AS-IS with no guarantees or refunds offered. 5. Failed to power up or testing and is being sold for parts. This item is sold AS-IS with no guarantees or refunds offered"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We Sell Your Anything 4467 E 50th St Suite 600 Des Moines. IA 50317
|
|
|
Beckman Rotor 50,000 rpm 50.2 TI Centrifuge Rotor. Solid Titanium.
Beckman 50.2 TI Rotor This Rotor is in the ball park of $5K new. Selling this used one dirt cheap. Here bidder bidder! 12 Position 50K rpm max Titanium Made in USA No defects Beckman Centrifuge Type 50.2 UNSPSC: 41103909 Rotor Type: Ultra- Fixed Angle Maximum Speed: 50.000 rpm Maximum RCF at r max(g) 302.000 x g k-Factor: 69 Rotor Material: Titanium r min: 54.4 mm r av: 81.2 mm r max: 107.9 mm Nominal Rotor Capacity: 468 mL Number of Rotor Cavities x Nominal Largest Load Capacity: 12 x 39 mL Nominal Largest Container/Bucket/Carrier/Canister Dimensions: 25 x 89 mm Thanks for viewing! Check out my other items.
|
|
|
IEC # 822 12 Place Centrifuge Rotor + 1/2'' Reducer Collet & Wrench
IEC# 822 12 place rotor with step down collet that converts it from 3/4' tapered shaft application to 1/2' straight shaft. Was mounted in Damon UV centrifuge. No damage noted-just a few stains. We do not ship UPS or USPS for Lower 48 US-only Fedex Ground. So if we have listed this with Ebay’s Shipping Calculator please note that it will Fedex Ground. Welcome to Warenhandler’s sales. Please read all of our policies before bidding. Bidding on this item is open to US Canadian.And other International bidders. All international bidders MUST contact us for estimate BEFORE bidding. See international terms below. Policies: ~ please read all before bidding. All items are used and sold strictly AS IS with no warranties expressed or implied unless stated in description. There are no returns unless we send you the wrong item or have put a warranty ... moreon it. We are not the original owners of items so have little knowledge of previous history. We have only run very basic testing.If any at all, so refer to description for details of what we have checked. We are not experts concerning anything we sell. But will gladly try to run further tests with your expert instructions if possible. Please know what you are bidding on. Look over pictures. And ask questions. Most items are for sale at our warehouse so we reserve the right to cancel auctions at anytime to sell locally. We will not cancel once a bid has been placed though. Payment: Payment is expected within 4 days of invoice unless you are doing local pick-up or discuss with us otherwise. We accept Paypal. Or Cash(if you are doing local pickup)or other forms of payment in the certain categories that ebay will allow them. Sorry but Ebay rules do not allow us to list alternative payment methods for all categories. Communication: We try to answer all emails and send invoices within 24 hours. If you do not receive a reply-check your spam filter first and then email us again if needed. Tracking numbers for Fedex or international shipments will be posted in your MY EBAY. Becau
|
|
|
Beckman Centrifuge Rotor Type 30 TY30 30,000 RPM F1010 26,000 RPM *Lot of 2*
Beckman Centrifuge Rotor Type 30 TY30 30.000 RPM F1010 26,000 RPM*Lot of 2* Lot Includes: 1) Beckman Type 30 12 well Fixed Angle 30.000 RPM Centrifuge Rotor w/ lid and stem lock, 1) Beckman Type F1010 10 well fixed angle 26.000 RPM centrifuge rotor w/out lid or stem lock, You are bidding on a lot of 2 used Beckman Fixed Angle Centrifuge Rotors. As you can see the F1010 rotor is missing the lid as well as the stem lock. Both of these are in pretty good condition with only minor scuffs and scratches from normal use. Please bid with confidence. 100% Satisfaction Guaranteed! Winning Bidder is to pay the Bid amount plus $19.99 for packing and shipping for the lower 48 States. International packages will be handled by the eBay Global Shipping Program. All buyers located in Georgia will pay 7.0% sales tax. Buyer can Pay with: Paypal. I cannot ship ... moreto a P.O. Box. Thanks. C3) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sorvall 402 Centrifuge Rotor Adaptors, lot of 2, 50 ml to 15 ml pc@263
This listing is for a lot of 2 Sorvall centrifuge rotor adaptors. Catalogue number 402. These hard rubber inserts adapt a 50 ml rotor to 5/8" 1.5 cm) inside diameter which will then hold a 15 ml conical centrifuge tube. These two are in fine condition save a little rust staining on one. If not satisfied for any reason return the item within 60 days for a refund. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Corning 8446 Centrifuge rotor tube liners, lot of 2. pc@263
This listing is for a lot of two Corning flexible rubber 50 ml centrifuge tube rotor liners. Catalogue number 8446. These are in fine condition, save a little dusty/dirty. If not satisfied for any reason return the item within 60 days for a refund. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
50 ml Centrifuge Tube Rotor Liners, lot of 2 pc@@263
This listing is for a lot of two flexible rubber 50 ml centrifuge tube rotor liners. These are in fine condition. Save a little dusty/dirty. If not satisfied for any reason return the item within 60 days for a refund. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of (12) Rotor Insert Swing Bucket Adapters Centrifuge 2, 16, & 22 Position
This listing is for a lot of 12 centrifuge bucket adapters. 4) 2-Position ~29mm Diameter(4) 16-Position ~14mm Diameter(4) 22-Position ~12mm Diameter Complete dimensions and more photos are available upon request. Don't hesitate if you have any questions. Thanks for looking: Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DuPont Sorvall Brass Rotor / Swing Arm & Tubes for GLC-2 Table Top Centrifuge
DuPont Sorvall Brass Rotor/ Swing Arm& Tubes for GLC-2 Table Top Centrifuge Description: DuPont Sorvall Brass Rotor/ Swing Arm. Tubes& Rings for GLC-2 Table Top.Comes with Brass Center Rotor 4 Brass Rings& 4 Tubes.Used. Very Good Condition.US Buyer Pays $12.00 Shipping.I also have another set of Tubes& Brass Rings for this on ebay.Will combine Shipping.
|
|
|
Beckman VT165.2 Class H.R. 65k rpm 16 place Centrifuge Rotor
1-888-9WEC2IT(993-2248) Problem? Beckman VT165.2 Class H.R. 65k rpm 16 place Centrifuge Rotor. Item Description. Beckman VT165.2 Class H.R. 65k rpm 16 place Rotor. In good cosmetic condition with no dings or dents. Includes stand as shown. Shipping charges seem too high? Please contact us through"ask a question" on the bottom of this ad with the item number and your postal code and we will investigate shipping charges.if you are an international buyer please provide city. Country, and postal code. Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping? Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note Virginia sales tax of 5.3% will be charged for all items locally ... morepicked up. Our address is C2 Management 3 Cattlemans Ln Berryville. VA 22611. 540-955-5740. Buying more items from us? We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1435ce477ec-0xd6-
|
|
|
Set of 6 Beckman 115.2 Centrifuge Rotor Buckets
1-888-9WEC2IT(993-2248) Problem? Set of 6 Beckman 115.2 Centrifuge Rotor Buckets. Item Description. Manufacturer Beckman, Model Number 115.2, Category Business& Industrial Healthcare. Lab& Life Science Lab Equipment Centrifuges& Parts Rotors& Parts, Cosmetic Wear Items are used but in decent condition. Functional Condition Functional, Testing Procedure Items were pulled from a working environment. Items Included In Listing Set of 6 Beckman 115.2 Centrifuge Rotor Buckets& Stand- as shown. Not Included Centrifuge, LMC012. Shipping charges seem too high? Please contact us through"ask a question" on the bottom of this ad with the item number and your postal code and we will investigate shipping charges.if you are an international buyer please provide city. Country, and postal code. Sorry, we do not use customer shipping ... moreaccounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping? Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note Virginia sales tax of 5.3% will be charged for all items locally picked up. Our address is C2 Management 3 Cattlemans Ln Berryville. VA 22611. 540-955-5740. Buying more items from us? We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1435ce4784b-0xfb-
|
|
|
Heraeus Sepatech Centrifuge Rotor # 8175 & 4-Cups as follows: 2-8172; 306; 301
Heraeus Sepatech Centrifuge Rotor# 8175& 4-Cups as follows: 2-8172; 1-306;1-301
|
|
|
Rotor Shandon Cytospin 2 II 3 III Cytocentrifuge Scientific Digital Centrifuge
You are bidding on one Rotor for Shandon Cytospin centrifuge. Looks like hardly used condition. It came from Cytospin II and should fit III as well. Please look at the pics for details. Sold as is in a pictured described condition. Free S&H to lower 48 states only. We'll combine shipping for multiple purchase. Please E-mail me if you have any questions. It is FREE. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
|
|
|
Set of 2 IEC 5707 Centrifuge Rotor Bucket Tube Adapters 40ml 50ml Thermo Centra
Untitled Document Set of 2 IEC CAT. 5707 Centrifuge Rotor Tube Adapters(Inserts) Each with 7 Place Holders for 40ml- 50ml tubes Each set consists of two(2) CAT. 5707 Adapters + Base CAT. 47454 + Metal Clamp Hanger Compatible with IEC/Damon/Thermo Centra 7. Centra 8, GP8 and many other centrifuge models with 750ml swinging buckets Compatible with the following IEC rotors: 216. 218A, 228 and the following IEC swinging buckets: 378. 316, 316S, 3218, 377S Manufacturer: IEC, Model Number: 5707, Description: Set of 2 Centrifuge Rotor Inserts, Made in: United States, Weight: 2Lbs, Condition: Fully functional Cosmetic: Excellent,
|
|
|
Beckman 337901 Type 50.2 Ti 50,000RPM 468ml Titanium Fixed Centrifuge Rotor+Lid
Questions? Call us: 1-877-328-9236. Beckman 337901 Type 50.2 Ti 50.000RPM 468ml Titanium Fixed Centrifuge Rotor+Lid. Manufacturer: Beckman Model: 50.2 Ti Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Beckman Condition: Used. Comes in non-original packaging. This rotor is in Good cosmetic condition with only minor blemishes from prior use. Mostly marks on top of the lid. Notes: This rotor is in Good working condition. It came to us in an ultracentrifuge and we spun it to 50.000 RPM for several minutes with no problems. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Beckman 337901 Rotor, 1) Lid, 1) Handle, Specifications: Manufacturer: Beckman, Type: 50.2 Ti, Part number: 337901, Fixed-angle centrifuge rotor, Maximum ... morespeed: 50 000 rpm, For use in instruments classified F. G, H, Density rating at maximum speed: 1.2 g/mL, Relative Centrifugal Field* at maximum speed At rmax(107.9 mm) 302 000×g, At rav(81.2 mm) 227 000×g, At rmin(54.4 mm) 152 000×g, k factor at maximum speed: 69, Number of tube cavities: 12, Nominal tube dimensions: 25×89mm, Nominal tube capacity: 39 mL, Nominal rotor capacity: 468 mL, Rotor material: titanium. Black polyeurethane finish, Aluminum lid, O-rings under lid maintain atmospheric pressure inside, Rotor drive pins are not required due to rotor weight, Overspeed disk is included, SKU: N52D006 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Masterca
|
|
|
Set of 2 IEC 5719 Centrifuge Rotor Bucket Tube Adapters 10 - 20ml Thermo Centra
Untitled Document Set of 2 IEC CAT. 5719 Centrifuge Rotor Tube Adapters(Inserts) Each has 19 Place Holders for 10ml- 20ml tubes Each unit consists of: two(2) CAT. 5719 Adapters + Top Retainer CAT. 3816 + Metal Clamp Hanger CAT. 47069 Compatible with IEC/Damon/Thermo Centra 7. Centra 8, GP8 and many other centrifuge models with 750ml swinging buckets Compatible with the following IEC rotors: 216. 218A, 228 and the following IEC swinging buckets: 378. 316, 316S, 3218, 377S Manufacturer: IEC, Model Number: 5719, Description: Set of 2 Centrifuge Rotor Inserts, Made in: United States, Weight: 2Lbs, Condition: Fully functional Cosmetic: Excellent, 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143ba19f78f-0xd2-
|
|
|
Set of 2 IEC 5827 Centrifuge Rotor Bucket Tube Adapters 7ml - 10ml Thermo Centra
Untitled Document Set of 2 IEC CAT. 5827 Centrifuge Rotor Tube Adapters(Inserts) Each has 27 Place Holders for 7ml- 10ml tubes Each unit consists of: two(2) CAT. 5827 Adapters + Base CAT. 47454 + Black Top Retainer CAT. 3862 + Metal Clamp Hanger CAT. 47069 Price is for two(2) units. There are six(6) available. Purchase 2 to receive 4 units or 3 to receive 6 units total. Compatible with IEC/Damon/Thermo Centra 7. Centra 8, GP8 and many other centrifuge models with 750ml swinging buckets Compatible with the following IEC rotors: 216. 218A, 228 and the following IEC swinging buckets: 378. 316, 316S, 3218, 377S Manufacturer: IEC, Model Number: 5827, Description: Set of 2 Centrifuge Rotor Inserts, Made in: United States, Weight: 2Lbs, Condition: Fully functional Cosmetic: Excellent,
|
|
|
Beckman Rotor 50,000 rpm 50.2 TI Centrifuge Rotor. Solid Titanium.Ser. No.1475
Beckman Rotor 50.000 rpm 50.2 TI Centrifuge Rotor. Solid Titanium.Ser. No.1475 12 Position 50K rpm max Titanium Made in USA No defects Beckman Centrifuge Type 50.2 ti Ultra- Fixed Angle Maximum Speed: 50.000 rpm Maximum RCF at r max(g) 302.000 x g k-Factor: 69 Rotor Material: Titanium r min: 54.4 mm r av: 81.2 mm r max: 107.9 mm Nominal Rotor Capacity: 468 mL Number of Rotor Cavities x Nominal Largest Load Capacity: 12 x 39 mL Nominal Largest Container/Bucket/Carrier/Canister Dimensions: 25 x 89 mm
|
|
|
Eppendorf Centrifuge Rotor RPM A-462 MAX 4000 rpm Max 4x1,1 Kg / 2 extra Buckets
Eppendorf Centrifuge Rotor RPM A-462 MAX 4000 rpm Max 4x1.1 Kg including extras 2 Buckets Posted with
|
|
|
(2) Eppendorf Centrifuge 5415C both power on both spin comes with (1) ROTOR
Technology Recovery Service We welcome all new customers and all returning customers to our site. We encourage all new customers to read our policies before casting your bid. Also please read the last paragraph for other details. 2) Eppendorf Centrifuge 5415C both power on both spin comes with(1) ROTOR both shipping together both spin with no hesitations. We have only one rotor between the two Please do not assume something to be included in this auction. Such as something that has not shown in the pictures or something that is not mentioned to be included. About U s/ Policies W e do our best to give an honest and fair presentation of all items that are listed. We are a asset recovery and re-marketing company and most of this equipment has just come from corporate leases. As a result. Most items that are being sold are not things we have ... moreowned for any considerable amount of time or used thoroughly. We have no technical experience in this field of equipment. We are only capable of plugging an item in to see whether it power's or not. Thus, we may not always know the exact condition of a piece of equipment or be able to attest to its complete operational status beyond this point. Please bid accordingly. No cables. Powering cables or manuals will be shipping with this equipment unless otherwise stated above. Shipping and local pick up terms: We only ship to address located in the address section on all Paypal invoices. We will not and do not ship to add on address. We do not drop ship deliveries(no exception) We ship by the means of"FedEx Ground" only. no P.O boxes and no APO's) U.S. Shipments And Canada only No other international shipments. No exceptions. All items will ship in the order that they are received. Shipping turn around usually takes up to 7- 10 working days in which your item or items should arrive. If high bidder wishes that His or Her item ship sooner. FedEx express shipping is available upon request( express charges will apply) Since we do use all new packaging materials. There
|
|
|
Lot of 2 IEC 250 mL Rotor Insert Bucket Adapters Cat 7236 217.5 gms Centrifuge
Function: This item is used. It was tested. And found to be fully functional. Cosmetic Condition: This item is in good shape cosmetically. There are a few minor scratches. Scuffs, and/or markings here and there from normal use. Please see pictures for more details. Sale Includes: This sale includes unit and original box. Return Policy: Returns Accepted, Item ID: 100106JKS- PD38- L0503153 0003, What you see is what you get. Payment is expected within 3 days. Unless other arrangements are made. We accept payments through PayPal only. We accept credit cards through PayPal. We scan the serial numbers of all outgoing items for verification if a return is accepted. Double check your shipping address before checkout. We do not re-ship items for free. We are not responsible for finding lost packages due to incorrect shipping information. Thank you ... morefor viewing the item featured on this page. We are careful to be as accurate with our item descriptions as possible. And we appreciate you taking the time to read what they say. Please be certain you understand the condition of the item, and what is included. Please be certain you are able and willing to pay for the item before placing your bid, or buying. If you are uncertain for any reason that we can help with, please send us a message prior to bidding, buying, or making an offer. We ship most packages VIA FEDEX Ground. If you select UPS. Most likely your packages will be delivered FEDEX* We understand the importance of Professional and Prompt delivery. Every item we sell is packaged and ready for delivery Within 48-Hours of receiving payment. We take pride in our full time shipping and receiving department. And we insure that every item that leaves our doors is packaged very well, including bubble wrap. Sturdy boxes, and extra padding. We will also combine shipping. Just send us a message with your terms. And we will be happy to work with you. Let's face it. Things happen. We take every necessary precaution to yield the best possible outcome with each transac
|
|
|
Lot of 6 IEC Centrifuge Rotor Tubes Shields Buckets Cat. 320 74.2 g grams 50ml
Untitled Document Lot of 6 IEC CAT. 320 Centrifuge Tubes(Shields. Buckets) 50ml Each tube is stamped 74.2 gms Stainless Steel made in USA Compatible with IEC/Damon/Thermo Centra 7. Centra 8, GP8 and other centrifuge models. For use with IEC rotors such as 269 swinging bucket rotor and CAT. 325 Trunnions(See my other listings for Trunnions) Manufacturer: IEC, Model Number: 320, Description: Lot of 6 Stainless Steel Centrifuge Tubes(Shields) Made in: United States, Weight: 2Lbs, Condition: Fully functional Cosmetic: Very Good. Signs of use
|
|
|
Beckman 50.2 Ti Rotor 50,000 rpm 12x50 ml Centrifuge 12 place fixed Laboratory
Beckman 50.2 Ti Rotor 50.000 RPM Beckman 50.2 Ti 50.000 rpm Rotor. 12 x 50 ml. 12 place Fixed S.N. 97u3278 REF: wood shelf. Room 203 All items are sold as is/ for parts. Units are not tested for working condition. Buyer must ask all questions before bidding and/or buying. Item has been cleaned and handled in accordance with the manufacturer's instructions. Buyer is responsible for all shipping. Packaging and/or freight charges. Large items will require a freight quote request. Requests will be processed within 48 business hours. Items are located in Holly. Michigan. Items may be picked up for no charge. Delivery is available for most items within 250 mile radius of Grand Blanc, Michigan for a fee. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. You must ... morebe an authorized purchaser. If the item is subject to FDA regulation. I will verify your status as an authorized purchaser of this item before shipping of the item. Regardless of the origin of the equipment. Photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyer’s responsibility to have this item professionally tested and certified by an authorized technician prior to use. Amy's Bubbling Boutique Grand Blanc. MI 48439 810-584-5772 On Jan-16-13 at 17:43:31 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
2 Rotor Plugs and 2 Tube Spacers for Beckman VTi 50 Titanium Centrifuge Rotor
2 Rotor Plugs and 2 Tube Spacers for Beckman VTi 50 Titanium Centrifuge Rotor There are signs of usage. The tubes spacers are for 25x89 mm dome-shaped tubes.
|
|
|
2 buckets/holders for H1000B & RT-H250 Sorvall centrifuge rotor ss@226
This listing is for a pair of Sorvall(P/N 11106) Tabletop Centrifuge Horizontal 250 ml swing buckets. Used. Very good condition. Some cosmetic wear from use. If not satisfied for ANY reason. Send it back within 60 days for a refund. Please see our other listings since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
G107078 Lot (2) Beckman GH-3.8 681g Centrifuge Rotor Buckets
Click to Enlarge) Product ID# G107078 This lot of Two(2) Beckman GH-3.8 681g Centrifuge Rotor Buckets appears to be in good cosmetic condition. Although there are a few dings, scratches, signs of previous use. The buckets could use a good cleaning. Please see the photographs. Since I am unable to formally test or verify calibration, I am obligated to list this lot as“Not Working” Items come exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test these items so they are being sold as is. The unpacked dimensions of this lot are approximately 11“L x 6“W x 5“H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without ... morewarranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 16 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 4 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypa
|
|
|
Beckman / Sorvall Rotor 50,000 rpm Type 50.2 TI Centrifuge Rotor. Titanium. #2
Great Working Rotor! Location =#2
|
|
|
Beckman / Sorvall Rotor 50,000 rpm Type 50.2 TI Centrifuge Rotor.Solid Titanium.
Great Working Rotor!
|
|
|
LOT OF 2 BECKMAN TH-4 CENTRIFUGE ROTOR HOLDERS BUCKETS 270-341980
Units are in good condition. Ready to be put to great use. Please email me if you have any questions.
|
|
|
Eppendorf F45-24-11 24 Place Centrifuge Rotor 1.5 & 2 ml 5415R & 5415D Warranty
EPPENDORF 24 PLACE FIXED ANGLE CENTRIFUGE ROTOR FOR 5415R OR 5415D MODEL: F45-24-11 WE WILL GUARANTEE THE UNIT TO BE FUNCTIONAL. UNIT IS USED BUT IN PRISTINE CONDITION(LOOKS BRAND NEW) 30 DAY WARRANTY INTERNATIONAL SHIPPING AVAILABLE(PLEASE CONTACT US FOR A SHIPPING QUOTE) ROTOR WILL BE SHIPPED WITHIN ONE BUSINESS DAY Fixed-angle rotor with maximum relative centrifugal force(rcf) of 16.110 x g, Polypropylene snap-on lid included, 24-place tube array holds 1.5 mL or 2.0 mL tubes, Adapters available for 0.2 mL PCR tubes. 0.4 mL microcentrifuge tubes, 0.5 mL microcentrifuge tubes, and 0.6 mL microtainers(sold separately) For use with Eppendorf microcentrifuge models 5415 D or 5415 R(sold separately) dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1449ff9d1b4-0x106-
|
|
|
Hermle Z233 MK-2 Labnet Centrifuge Rotor
Hermle Z233 MK-2 Labnet Centrifuge Rotor Please read our policies below including those on shipping BEFORE bidding! Please inquire about additional payment methods. For Local Orders that are picked up at our facility we can accept Visa. Mastercard, Checks, and Wire Transfers, Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! For more info about our company feel free to visit the‘about me” page. Click the icon next to our Ebay username. There you will find a link to our website and more. 30 Day Warranty! Beautiful Condition· Works and Looks Great Dealer Priced to sell! Buy with confidence from#1 rated seller online! No Reserve! Any questions about this item. Please contact Dylan Redd At 770-939-5971 or Cell# ... more404-403-1125 We offer dealer prices to the general public! Click the Icon next to our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please. Please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your consideration. Sincerely. Dylan C. Redd Return Policy and Guarantee: THIS EQUIPMENT IS OFFERED WITH OUR AS-REPRESENTED GUARANTEE: For U.S. sh
|
|
|
Eppendorf Fixed Angle F-45-18-11 18 x 1.5/2.0ml Centrifuge Rotor 5402 5415
This item is in the cosmetic condition shown. It is in good working order. The auction includes ONLY what is shown. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BECKMAN TY JR-3.2 RACK ROTOR SWINGING BUCKET MICROPLATE CENTRIFUGE ROTOR
This Sale Is For A Laboratory Surplus Beckman Model TY JR-3.2 Swinging Bucket Microplate Centrifuge Rotor. It is rated at 3200 RPM and has a capacity of 4 wells. It is in excellent operational and good cosmetic condition. Buyer to pay calculated shipping via UPS Ground. Local Pick-Up here in Folsom. CA is welcome. Feel free to call me if you have any questions. Mark 916-761-6310.
|
|
|
Lot of 2 Beckman GH-3.8 Centrifuge Rotor Buckets 3750 RPM 685g GH 3.8
2)Beckman GH-3.8 Centrifuge Buckets PLEASE READ THE FULL DESCRIPTION By bidding on this item you accept the terms stated below. Up for auction is a lot of 2 used Beckman GH-3.8 685g centrifuge buckets. These buckets are in excellent cosmetic condition and look to be very well taken care of. This sale will include all that you see below 2 Beckman GH-3.8 buckets and 2 14 tube adapters. Please refer to the pictures provided below for more details on the condition of the item. ATTENTION INTERNATIONAL BIDDERS: Import duties. Taxes, and Customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. It is illegal to falsify customs documentation by changing the value ... moreor marking items sold as"gift" We will not accommodate any such requests. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011- 26308. Powered by
|
|
|
Jouan AB 2.14 Centrifuge Rotor Fixed Angle 24-Place AB2.14
Jouan AB 2.14 Centrifuge Rotor Fixed Angle 24-Place AB2.14. 20.000 max rpm, Max load 0.096 kg. Used rotor, pulled from a Jouan centrifuge that recently quit working. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 4 Variuos Beckman Centrifuge Rotor Inserts, 2 Orange, 2 Green
Lot of 4 Variuos Beckman Centrifuge Rotor Inserts. 2 Orange, 2 Green Previously owned in excellent condition!
|
|
 |