|
MP40- Trunion- original WWII
ORIGINAL GERMAN TRUNION FOR MP40 ERA:WWII GOOD CONDITION WITH STAMPS
|
|
|
DELTA ROCKWELL 10" UNISAW FRONT TRUNION LTA-406
Up for sale is a Delta Rockwell 10" tilting arbor saw front trunion. Item is in good usable condition. LTA-406. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping ... morewhen I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amount can be much higher
|
|
|
Delta homecraft/Trunion lock handle for delta homecraft bandsaw
Original lock handle for delta homecraft Bandsaw.item is in good shape.used to lock the Bandsaw table at desired angle.part is identical to crank handle for 10" tilting table saw Posted with di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e3a2ec87b-0xfa-
|
|
|
CRAFTSMAN 10" TABLE SAW TRUNION ARBOR ASSEMBLY & BLADE FOR MODEL #113.299315,
TO SKYNON'S TOOLS! THIS IS A USED ARBOR ASSEMBLY BY CRAFTSMAN ARBOR BEARING WITH BLADE AND WARDWARE FOR 10" TAB SAW CRAFTSMAN MODEL 113.299315 10" TABLE SAW GOOD USED CONDITION! WE ARE PARTING OUT THIS ENTIRE SAW PLEASE SEE ARE OTHER LISTINGS FOR MORE PARTS NO RESERVE! WE ALWAYS HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS.CHECK THEM OUT! ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e4fb19051-0xf2-
|
|
|
1995 TSUDAKOMA MODEL TRNC-301 12 INCH 4TH AND 5TH AXIS CNC ROTARY TRUNION TABLE
HIGH PRECISION TILTING ROTARY TABLES TRNC-Series tables feature a ±110° tilt range due to a unique differential gear system. The motor section does not move allowing for simplified cable management. Model TRNC-151S TRNC-201S TRNC-301S Tilt Range-110° ~ +110° Table diameter 160 225 320 Table height at 0° position 260 315 345 Center height at 90° position 190 235 255 Center bore Nose Diameter 35H7 40H7 40H7 Thru Diameter 35 32 40 Table T-slot width 12H7 12H7 14H7 Guide block width 14h7 18h7 18h7 Servo motor(Fanuc) Rotary Tilt Rotary Tilt Rotary Tilt Alpha 4i Alpha 4i Alpha 4i Alpha 4i Alpha 8i Alpha 8i Maximum motor speed rpm 4.000 4,000 4,000 4,000 3,000 3,000 Speed reduction ratio 1/180 1/180 1/360 1/360 1/360 1/360 Maximum table speed rpm 22.2 22.2 11.1 11.1 8.3 8.3 Inertia converted into motor shaft x 10-3kg.m2.08.3.33.59.38.63 ... moreClamp system Pneumatic Pneumatic Hydraulic* Hydraulic* Hydraulic* Hydraulic* Clamp torque@72psi[500 psi] Nm(ft. lbs. 225(166) 225(166) 490] 361) 490] 361) 833] 614) 980] 722) Indexing accuracy arc sec. ±10- ±7.5- ±7.5- Indexing repeatability arc sec. ±2- ±2- ±2- Tilting accuracy(0° ~ +90°) arc sec. ±22.5- ±22.5- ±22.5 Tilting accuracy(90° ~ +90°) arc sec. ±30 ±30 ±30 Tilting repeatability arc sec. ±2- ±2- ±2 Net Weight kg(lbs. 145(319) 280(616) 350(770) Allowable wheel torque- rotary Nm(ft. lbs. 147(108) 470(346) 764(563) Allowable work inertia kg.m2.15.63 1.91 Allowable work weight kg(lbs) 0° tilt angle 50(110) 100(220) 150(330) 0° ~ 90° tilt angle 35(77) 50(110) 100(220) Allowable work moment Nm(ft. lbs. 78.4(57.8) 156.8(115.6) 254.8(187.8) Allowable load when table clamped N(lbf) 6.860(1.537) 9.800(2.195) 14.700(3.293) Nm(ft. lbs. 225(166) 490(361) 980(722) Nm(ft. lbs. 225(166) 490(361) 980(722)
|
|
|
Terex Scraper Steering Trunion
Used but good workhorse condition Steering Trunion for Terex Scraper. TS-14 or TS-18. heavy duty, in used but good working condition. No cracks, re-welds, etc. New sells for $3000.00. Only one left. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e8319c7e3-0xf4-
|
|
|
M2HB 50 CAL. MA DEUCE M3 BROWNING TRUNION ADAPTER TOOL RARE
this is a 50 CAL M2HB TRUNION ADAPTER ore what ever you want to call this THESE ARE VERY HARD TO FIND, MOST BIGGER DEALERS DONT EVEN HAVE THESE ON STOCK! still in good condition FOR MESSUR MENTS WE HAVE PUT IT NEXT TO A CENTIMETERS LINE. CHECK IT OUT as far as we can see it.S complete nice MARKINGS. AND ALSO THE WHOLE TREATHED SECTION LOOKS PERFECT, NO DAMAGE! See pic. Etc. etc. please look at the picture this comes from original old stock. Good condition only markings that could bee seen are from storage some grease sligth use. But item looks very good! keep in mind that packing& shipping wil be 42 US dollar these are getting almost impossible to find these days. Get yours now! good luck bidd ing
|
|
|
WWII German MP40 Trunion Cut Receiver Part
This auction is for a original MP40 receiver cut trunion. This makes for a interesting paper weight for the history collector. Sold with no reserve!
|
|
|
HOT POINT COUNTER TOP ELECTRIC TRUNION SOUP KETTLE
PLEASE DON'T BID IF YOU DON'T WANT TO PAY AFTER YOU WIN. You are bidding on USED CONDITION" HOT POINT" COUNTER TOP ELECTRIC TRUNION SOUP KETTLE. MODEL# CS50 197-219V. 5.0AMPS MADE IN USA. NSF 16"L x 14"W x 26"H It worked when removed from closing down business.AS SEEN IN PIC SELLING AS IS. Welcome to Bargainsfoodequipment where you can get the restaurant. Food service equipment at cheap price. We have 25000 sq ft ware house located in Battle Creek, Michigan. We are one of the biggest used restaurant equipment reseller in South west Michigan specializing in Restaurant, Bakery, Pizza, Ice cream and Grocery Deli Supermarket equipment. We work closely with repo company and bank so we are able to get the equipment at low prices which we are able to pass on to you. Why buy new? Save BIG $$$$ here. Thank you for ... morevisiting our store and May you all have The Happy Life. We ship to your paypal shipping address or make sure you individually email for different shipping address. Why pay $ more for brand new one? Here is used condition with the cheaper price. Please call 616-638-2465 for more information and faster service. Also click this link to save big $$$$$ for restaurant equipments. Indoor, outdoor lightings, household goods, tools and more. For our store inventory. Please visit our pro store Bargainsfoodequipment.COM e and save money here. Thank you very much for visiting our store. Bargains-R-Ours offers the following Policy: PAYMENT OF ITEMS We accept PayPal and other payment methods. Payment must be completed within 5 days of sale end We will send you final notice if we don't receive the payment 7 days after of the sale and report to eBay team to dispute your account then re list it If you are not so sure to pay. Please don't waste your or our time. You agree to pay 15% restock fee if you don't pay after you purchasing whether you or someone make mistake or have no funds available. If you live in Michigan we have to charge a sales tax of 6.00% SHIPPING AND CLAIMS Please ch
|
|
|
Rock Shox Super Ti Deluxe from a GT LTS /STS TRUNION ,may fit Schwinn 4-Banger
Normal 0 false false false EN-US X-NONE X-NONE Rock Shox Super Ti Deluxe from a GT LTS.STS,may fit Schwinn 4-Banger,TRUNION FLASH 5 day auction ~ No Reserve! Vintage 1999 Rock Shox Super Ti Deluxe from a GT LTS May fit Schwinn 4-Banger and GT STS turnion From a 1999 GT LTS that was mostly bike path ridden Was in great working condition when removed from the bike Measures eye to eye 4.50 inches/11.43 cm No Reserve FAST WORLDWIDE SHIPPIN G AUTHENTICITY& Satisfaction IS GUARANTEED As with all of my auctions I offer a 14 day satisfaction guarantee; if for any reason you are unhappy just send it back! Please see instructions in the returns section. Its simple and hassle free. BUY WITH CONFIDENCE from a top rated eBay seller. Smoke Free Environment. 99% of all orders are shipped out within 24 hours. I ship out every day so your item will be ... moresent out quickly. I pack as I would like to receive. Strong, safe& sturdy. USA insured shipping via Fed EX/or USPS ground you will receive an email with confirmation and tracking number upon shipping. International Buyers insured shipping via USPS.Fed EX, DHL If you do not see your country. Send me a email with your postal code for your shipping fee Free local pick up PLEASE SEND OVER YOUR PHONE NUMBER WITH YOUR PayPal PAYMENT AS IT IS NEEDED FOR THE SHIPPER. I cannot ship without a phone number An email with confirmation and tracking number upon shipping will be sent out Recent Feedback Reviews“ My BEST deal ever! TKS to this seller! bike box nuke proof AA+God bless U S A Canada buyer” Phenomenal. Bought this bike for my uncle and it was so nice I wanted to keep it” Amassing seller knows how to package a bike Add was clear and accurate thanks” Great seller Item just as described” Very accurate description. Easy to deal with, well packaged& expedient shipping” great oversea seller high problem solving attitude grazie from Italy” Excellent! Love this KLEIN Pulse! it rides like a new bike! thank you thank you! Super nice bike and Sal was excellent to deal with. B
|
|
|
VINTAGE HUBBELL MAGNULITER-INDUSTRIAL FLOODLIGHT WITH TRUNION MOUNT
UP FOR SALE ONE VINTAGE HUBBELL MAGNULITER FLOOD LIGHT WITH TRUNNION MOUNT AND BULB. THIS FLOOD LIGHT WORKS GREAT. HAS A NEW INDUSTRIAL YELLOW THREE PRONG PLUG, PLEASE SEE PICTURES. IF THIS WAS A NEW HUBBELL MAGNULITER IT WOULD BE COMPARED TO A MVM-0400P-268 IN THE HUBBELL CATALOG. IT IS A 400 WATT. PULSE METAL HALIDE AND RUNS 120/208/240/277 VOLTS. SIGNS OF WEAR AND TEAR TO BLACK PAINT WITH SOME SCRATCHES AND SCUFFING. PLEASE REFER TO PICTURES. I AM NOT AN EXPERT SO PLEASE ASK QUESTIONS BEFORE BUYING. THANKS FOR LOOKING!
|
|
|
Vintage Walker Turner 12" Bandsaw Tilting Table Support Trunion
Parting out old Walker Turner 12" bandsaw. This is tilting table support trunion See photos for condition. See other auctions will combine shipping. Please check out my other auctions. Outside the USA Please ask about shipping
|
|
|
ROT-0472 Spindle Drive w/gear trunion for Fadal TR65 Rotary Table
Fadal Part is like New(no wear at all) and is used in the Fadal TR65 rotary table
|
|
|
Meccano Part 126 Trunion Green Pack of 15
MECCANO PART NUMBER 126 Trunion Green Pack of 15 THANKS FOR LOOKING PLEASE SEE MY OTHER MECCANO ITEMS I HAVE ON EBAY
|
|
|
Meccano Part 126 Trunion French Yellow Post 1980 Pack of 9
MECCANO PART NUMBER 126 Trunion French Yellow Pack of 9 Post 1980 THANKS FOR LOOKING PLEASE SEE MY OTHER MECCANO ITEMS I HAVE ON EBAY lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f3dc521a4-0xf2-
|
|
|
80172 USED: Lee super jacketed trunion mounted kettle, model 10CD. 316 stainless
Click To Enlarge- USED: Lee super jacketed trunion mounted kettle. Model 10CD. 316 stainless steel, 10 gallon, 17" diameter x 14" deep, open top with pour lip, hemispherical bottom, 2/3 bottom jacket rated 40 psi@ 287 deg F, manual tilt. Mounted on 3 legs to a cart on casters. ref# 80172. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We ... moreaccept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Lot Of 2 IEC 1024 Cytobuckets Trunion Carriers
Welcome to Labb Surplus! We carry all types of Hi- Tech. Medical and Laboratory Surplus at bargain prices. Our Business is one of the largest and most diverse in Houston. Our stock is comprised of gently used items from State Universities. Hospitals and Government Institutions. Up For Auction 1 Used Lot Of 2 IEC 1024 Cytobuckets Trunion Carriers For use with 71-8050 rotor in Centra-HN-SII and Centra-CL3/CL3R centrifuges and 71-8055 rotor in MP4/MP4R. Centra-CL2, Centra-CL3/CL3R and Centra-HN-SII centrifuges. Designed for centrifugation of dillute cell suspensions to produce a monolayer on 3 x 1 inch and 75 x 25mm microscope slides. Cells can be treated with fixative directly in the carrier. Ideal for dilute suspensions such as spinal fluids. Consists of polypropylene sample block in an anodized aluminum support base. Slide is placed on gasket ... morein base and is covered with sample block which is secured by means of a clamping device. Unit Powers Up& Appears Function Properly Came from working environment Only what is pictured/in description is included This unit is surplus from a local university hospital 30 Day No DOA Guarantee limited to item powering up. Does not include calibration, or other maintence type issues ~ Guarantee is void if security features are removed or tampered with ~ Please call us for any questions and information regarding this item. Debby Mario(530) 383-0671(281) 300-6104 SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. Labb Surplus recommends shipping LARGE ITEMS( Over 120 Lbs. to a commercial location with unloading capabilities to get the best possible rate. If this item must be shipped to a residential address we can do so. However, the freight company charges more for this do to the fact a lift gate truck is required. When needing a quote for shipping please include the following. Commercial or Residential address Ebay item number Zip code of where the item is to be shipped Phone number Shipping Instructions: Shipping and handling included in shipping calculator when using Ebay's Shi
|
|
|
70950001 Used- Accraply 9000VF Vertical Fixture Trunion Style Labeler. Capable o
Click To Enlarge- Used- Accraply 9000VF Vertical Fixture Trunion Style Labeler. Capable of speeds up to 600 bottles per minute(depending on size and application) Container size range: Diam) 1/2" 2" or 13mm- 51mm(Height) 1" 4-1/2" or 25mm-114mm. Labels Rolls: 16" on 3" O.D. Core. Has +/ 1/64" label accuracy. Has Hoffman HMI on movable pendent. Vision system, Pneumatic air blow reject, Allen Bradley 1305, and SP20 Servo Push/Pull label applicator. Last used in pharmaceutical packaging operation. 480V/3PH/60HZ. ref# 70950001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items ... moreoffered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Appleton AREAMASTER 100W HPS W/TRUNION
Got a lot of these from a house we were remodeling. Please ask any questions you have or send a valid offer Mfr. Part# GAM371LMT Overview FLOODLIGHT- MOGUL BASE HIGH PRESSURE SODIUM LAMP; LAMP WATTAGE 100 W; LAMP/BALLAST VOLTAGE 55 V(LAMP) 120/208/240/277 V(BALLAST) LAMP NOT INCLUDED; HX AUTO, MULTI TAP BALLAST; DISTRIBUTION/BEAM SPREAD WIDE; 5-1/2 INCH X 2 INCH YOKE MOUNTING; COPPER FREE CAST ALUMINUM HOUSING; ARCHITECTURAL BRONZE POLYESTER; SIZE 11 INCH W X 5-5/16 INCH D X 19-1/2 INCH H; APPROVAL UL 595, UL 844, UL 1572; AREAMASTER[T] BRAND; G-AM MODEL; ALZAK[R] ALUMINUM PARABOLIC REFLECTOR; APPLICATION GENERAL DUTY; GASKET MATERIAL SILICONE RUBBER; LENS MATERIAL THERMAL SHOCK AND IMPACT RESISTANT GLASS; SOCKET MATERIAL PORCELAIN WITH NICKEL PLATED HEAVY GAUGE BRASS CONTACT; TEMPERATURE RANGE 216 TO 230 DEG C[TS] Manufactured by APPLETON. ... moreAREAMASTER 100W HPS W/TRUNION. Weight: 3 lbs. Estimated Retail Price- $694.00. Jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13fc007c072-0xfe-
|
|
|
civil war artillery cannon trunion plate
For auction is an original civil war cannon trunion plate. This piece would actually hold the barrel of the cannon onto the carriage. Locking it down on the trunions, which are the pivot points sticking out along the sides of the barrel. There were 2 of these for each cannon, of course. I bought this from a very reputable dealer of CW relics, and he said it was for a 6 lb'er gun. Super rare original piece of a Civil War cannon! Us bidders only please. This is part of a large collection of CW artillery I am selling, please check out my other auctions. Thanks! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-14029d27901-0xfa-
|
|
|
Meccano Vintage Part 126 Trunion and 126a Flat Trunion WHITE Pack of 9
MECCANO PART NUMBER 126 and 126a Flat Trunion White 7 x Trunion 126 2 x Flat Trunion 126a See Picture for Condition THANKS FOR LOOKING Please see my other MECCANO Items I have Listed Posted with
|
|
|
FADAL MODEL TR 165 5TH AXIS CNC TRUNION FOR VMC 30 K REPLACEMENT COST
TR 165 5th Axis. 7-3/8" DIAMETER BASE MEASURES: 22" x 12" TORQUE: 368 IN OZ 2400 RPM MAX
|
|
|
FADAL MODEL TR 165 5TH AXIS CNC TRUNION ROTARY TABLE FOR VMC 6 1/2" PLATE
For Sale! FADAL MODEL TR 165 5TH AXIS CNC TRUNION ROTARY TABLE FOR VMC 6 1/2" PLATE(OC164) 6 1/2" PLATE MODEL# TR 165 MOTOR( GLENTEK INC. MODEL GM4020FE SN# 60731 MAX RPM 2400 General Information: You can preview this unit at our warehouse in Huntington Beach. California-Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Ph# Fax#
|
|
|
DELTA RADIAL ARM SAW MOTOR,TRUNION
FIT'S DELTA RADIAL ARM SAW MODEL#RAS-2C/2F AND MORE
|
|
|
Tsudakoma TRNC-301 12" 4th 5th Axis Tilting Rotary Trunion Table
Rotary Tables: Tsudakoma TRNC-301 12" 4th 5th Axis Tilting Rotary Trunion Table Specification Description Tilt Range, ±110º, Table diameter, 320mm/ 12.5" Table height at 0º position, 345mm/ 13.58" Center height at 90º position, 255mm/ 10.03" Center bore, Nose diameter, 40H7, Thru diameter, 40mm/ 1.57" maximum motor speed, 3000 RPM, Speed reduction ratio, 1/360, Maximum table speed, 8.3 RPM, Indexing accuracy arc sec, ±7.5, Indexing repeatability arc sec, ±2, Tilting accuracy(0º- +90º) ± 22.5, Tilting accuracy(90º +90º) ±30, Tilting repeatability arc sec, ±2, Net weight, 350kg/ 770 lbs, Allowable wheel torque- rotary, 764 Nm/ 563 Ft. lbs. Allowable work inertia, 15.63 1.91 kg.m2, Allowable work weight, 150kg/ 330 lbs, 0º- 90º tilt angle, 100(220) ... moreAllowable work moment, 254.8Nm/ 187.8 ft.lbs, Allowable work load when clamped, 14.700N/ 3,293lbf, 980Nm/ 722 ft. lbs, Equipped With: Features A ±110º Tilt Range Due To A Unique Differential Gear System. The Motor Section Does Not Move Allowing For Simplified Cable Management.
|
|
|
Mack trunion
Mack Trunion out of late 70's- early 80's. Buyer pays shipping/pick up All Sales Final
|
|
|
Davis and wells 12" vintage bandsaw table/trunion
Rare davis and wells 12" Bandsaw table
|
|
|
Motorola MCS2000 High Power Mounting Bracket Trunion Tray VHF UHF *HARD TO FIND*
1) Motorola MCS2000 High Power 1505946X03 TRAY MOUNTING ASSEMBLY. No hardware is included. Bracket only. In excellent physical condition. Unit is sold"AS-IS" Exactly what you see is what you will get. Please be sure to look at my other auctions. Thanks! THIS IS A HARD TO FIND BRACKET
|
|
|
Used 146731-01 TRUNION FOR DEWALT DW705 T7 MITRE -ENTIRE PICTURE NOT FOR SALE
Used 146731-01 TRUNION FOR DEWALT DW705 TYPE 7 MITRE-ENTIRE PICTURE NOT FOR SALE You are not buying everything in the picture. Only what is described in the listing. Please make sure the item number is what you want. We have been an authorized service center for most major brands for over 30 years After you buy a used part we inspect it one more time before we ship it. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14433f24f7b-0xef-
|
|
|
2001 Cannondale Jekyll 500 Shock Trunion collar first gen
2001 Cannondale Jekyll 500 shock trunion/ collar. First gen. undamaged and ready to mount. includes collar and bolts. Please ask before you bid or buy. I will answer as quickly, simply and as best I can. Shipping to PayPal address only, depending on weight, size and destination, you may get priority shipping. Frames and wheels take longer to ship so please make note of this and be patient. Please leave feedback as the same will be done for you, if you can't leave positive feedback contact me and we'll work it out. Payment is due within 2 days after auction's end, buy it now payment is due immediately. Thank You and Good Luck! Check out my other items!
|
|
|
Craftsman/Dunlap Table Saw -Complete Front Trunion Assembly- 13030 for 103.02041
Recently Recovered Craftsman/ Dunlap. Model#103.02041. A 1940s era Tilting Table- Table Saw. Made by King-Seeley for Sears- Craftsman. I am parting out this 103.02041 machine. Please check my other auctions for more pieces. Machine had gone into neglect. But from the looks of parts it does not appear to have had a very hard life. No abuse or bad corrosion and only minimal wear from ordinary use. Last photo is of whole saw. For reference only. Parts& components have all been cleaned and inspected for any problems. If none are reported here. Then they are good-to-go. Ready for reinstall and get back to work. This 103.02041 is not the only model number to use many of the same parts. As other saws from King-Seeley. Please refer to exact part numbers of your machine for possible compatibility. Parts catalog will list about a dozen different ... morenumbers for this complete trunnion setup. Those that have a casting number are as follows. Protractor(trunnion) 13030-103 Protractor guide; 13037-103 Clamp Nut Wrench; 103 10511 Auction is for the entire assembly as pictured above. Yes I combine shipping. Please request an updated invoice prior to check out. Any questions please feel free to ask. Thanks for viewing my item. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1445ad4e8a1-0x102-
|
|
|
ROCKWELL UNISAW FRONT TRUNION AND BRACKET SET 422-04-014 AND 422-04-095-5001
ROCKWELL UNISAW FRONT TRUNION AND BRACKET SET 422-04-014 AND 422-04-095-5001 MATCHED SET EXCELLENT BEAUTIFUL TEETH ON TRUNION SOME DRIED SAWDUST A BARGAIN FOR THAT ROCKWELL UNISAW
|
|
|
ROCKWELL UNISAW REAR TRUNION AND BRACKET LTA-406 AND LTA-404 SET
ROCKWELL UNISAW REAR TRUNION AND BRACKET LTA-406 AND LTA-404 SET MATCHED SET EXCELLENT SOME DRIED SAWDUST A BARGAIN FOR THAT ROCKWELL UNISAW
|
|
|
Craftsman 2-Stage Snow Blower Parts - Trunion Bearing 85501
Craftsman 2-Stage Snow Blower Parts- Trunion Bearing These parts are from a 2-Stage Craftsman snow blower Model No. 536.886141 with a 5 HP Model No. 143.995001 Tecumseh Snow King engine. Snow blower was in good running condition when parted out except for Auger Transmission. Parts are used. See pictures for description and condition of parts. Please ask any questions you may have before placing your bid. Buyer is responsible for determining fit for his/her application. You can return the parts if they are not right for you. But please note that return shipping is to be paid by buyer and refund will be total price paid less amount paid for original shipping. Thanks for looking and good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1447e3581e0-0xed-
|
|
|
Walker Turner CB970 8" table saw front and rear trunion parts
Parts in very good condition. No cracks.Breaks or chips. Throwing in angle scale if you purchase trunion parts.
|
|
|
Delta 9" Bandsaw tilt table trunion Shopmaster BS100 #900240
This sale is for 1 Used Delta band saw tilt table trunion. Bench top Shopmaster Model BS100. Type 1. S/N180659W5021 Good condition#900240 Thanks for looking and please visit my Ebay store. Affordable 3D Signs Where you will find a great and growing selection of unique signs for all occasions. Check out my!
|
|
|
Used 827467 BUSHING TRUNION FOR RIDGID TABLE SAW -ENTIRE PICTURE NOT FOR SALE
Used 827467 BUSHING TRUNION FOR RIDGID TABLE SAW-ENTIRE PICTURE NOT FOR SALE SHIPPED FAST! We have been in the Tool& Nailer business for over 30 years! We Have Many Tool Parts Available We Are an Authorized Warranty& Service Center for most major Brands Be sure to add me to your! YOU ARE ONLY BUYING THE PART THAT IS LISTED IN THE DESCRIPTION. NOT THE ENTIRE PICTURE. WE ARE GOING TO UNBOLT YOUR PURCHASED PART THAT YOU NEED. LET US KNOW IF YOU NEED ANOTHER PART. THIS TOOL HAD A MOTOR THAT WAS GETTING WEAK! EVERYTHING ELSE IS GOOD.
|
|
|
Shopsmith 10E/10ER Trunion Wrench Assembly
Shopsmith Trunion Wrench Assembly is in good used condition. Paypal payment only. Please ask questions prior to bidding, check out my other Shopsmith auctions, we will combine shipping. Thanks for looking. We will ship to Canada and Australia all duties. Taxes and extra shipping cost will be buyers responsibility. If an item is marked free shipping a shipping discount will be given.
|
|
|
USED Craftsman 8/26 Trac Friction drive Wheel- trunion bearing-traction pulley
USED BIDDING ON CRAFTSMAN TRUNION BEARING- DRIVE DISK AND TRACTION PULLEY-FRICTION DRIVE WHEEL. ALSO INCLUDES WASHERS(3)AND SET SCREW came off a craftsman II snowblower 8/26 trac drive. Model no 536885910. The picture of the snowblower is just to show what machine the part came off of. Part is used in GOOD CONDITION. You can go to searspartsdirect.com to get part numbers from your machine and this machine and match them up shipping for this item will be $4.99. Any questions ask before you bid. Thank you and happy bidding.
|
|
|
sears murray snowblower 583163-853 traction disc trunion bearing 85501 plate
disc and trunion bearing assembly in good condition. from craftsman model 536.886350. may fit murray. all in phto included
|
|
|
14" Bandsaw Table Trunion Jet Delta Powermatic Grizzly Central Machinery Ridgid
Here we have the cast aluminum table trunion off of a Central Machinery 14" Bandsaw. She's in excellent condition. As the bandsaw was only used for a few test cuts. Will fit many 14" bandsaws from Jet, Delta, Powermatic, Ridgid, Grizzly, and likely a few other clones. I've included shots of the exploded views of some of these other bandsaws. Max domestic USPS shipping for this item is $12.80. If your quote is for more. It will be adjusted upon invoice. Posted with a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144e2d27d9b-0x103-
|
|
|
Shopsmith Mark V Main Table With Fence & Trunion Assembly
The Following Item is for sale 1- Shopsmith Mark V Main Table/ Rip Fence/ Trunion Assebly. Item is in good working order and good condition unless otherwise noted. Please email any questions before bidding. Will call is available. Thanks for your interest in this item and Good Luck Bidding! All International Items Require Priority Mail no acceptions for International buyers due to insurance requirements. Powered by SixBit's eCommerce Solution
|
|
|
Craftsman II 5/23 Trac Drive Snow Blower 536.884810 - Trunion Bearing 9005383...
Craftsman II 5/23 Trac Drive Snow Blower 536.884810- Trunion Bearing 9005383 This part is from a Craftsman II 5/23 Trac Drive Snow Blower Model No. 536.884810 with a 5 HP Tecumseh engine. Part is used in serviceable condition. Buyer is responsible for determining if this item will fit his/her application. We accept returns if the part does not work out for you. Buyer to pay return shipping. Refund will be total price paid less cost paid by me for original shipping. Please ask any questions you may have before placing your bid. Thanks for looking& good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1450ba5aa45-0x106-
|
|
|
Delta 14" Bandsaw Trunion Table Support LBS-10
This is a support bracket from a Delta 14" wood-cutting bandsaw manufactured in the 1940s. It's in very good usable condition and includes the 2 mounting screws shown. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
14" Bandsaw, Upper and Lower blade guides with trunion cradle
14" bandsaw upper and lower blade guides and trunion cradle. General Woodworking" 14" bandsaw. Many parts available. Will combine shipping when possible. Most of the parts on this saw are compatible with Delta and other Asian made 14" bandsaws. Foreign bidders contact me for shipping quote.
|
|
|
14" Bandsaw Parts, Table trunion bolts
Trunion bolts with blocks. Washers, springs and faucet style handles. These are Delta and Chinese saw compatible. Very good condition. See my other auctions for more items from same band saw. I will combine shipping when possible.
|
|
|
DELTA ROCKWELL 10" UNISAW FRONT TRUNION LTA-406 LOT OF 4
Up for sale is a lot of 4 Delta Rockwell 10" tilting arbor saw front trunion. Items are in good usable condition. LTA-406. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return ... moreshipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amount can be
|
|
|
1953-55 Willys Spindle Trunion Piece
Categories Other Tractors Electrical Components Vintage Cars Rims& Hub Caps Computers& Accessories Willys Parts Honda Parts Cadillac Parts Toyota Parts Ford Parts Misc Car Parts Chicago Diecast Pulleys Hydraulic Tools& Equipment Briggs& Stratton Parts Tecumseh Parts Carbide Cutting Inserts Milling Tools and Cutters Drill Bits Indexable Tool Holders& Bars End MIlls& Taps Tool Boxes& Cabinets Specialty Pumps& Motors Electronics GM Parts Brock Equipment Parts 1953-55 Willys Spindle Trunion Piece Willys Spindel Trunion Piece As Is. Where Is, No Returns. Item(s) may be withdrawn if sold locally. Buyer must pay within 48 hours of purchase. Shipping Information: The shipping cost that you see is an estimate provided by E-bay. The actual shipping cost will vary by buyer location and calculated at the end of sale. SEE ... moreOUR STORE FOR MORE HIGH QUALITY PRODUCTS AT VERY REASONABLE RATES! gsrx_vers_526(GS 6.6.6(526)
|
|
|
Delta 9" Bandsaw tilt table trunion w/knobs Shopmaster BS100
Delta 9" Bandsaw tilt table trunion w/knobs Shopmaster BS100. In great shape. Ship to lower 48 states only. Please pay within 3 days. Thank you
|
|
|
Sears Craftsman KING SEELEY Front Trunion Trunnion Table Saw 103 Series PART
Sears Craftsman KING SEELEY Front Trunion Trunnion Table Saw 103 Series PART Please look at photos carefully. Thanks
|
|
|
Shopsmith Greenie Table Saw Table Trunion Assembly & Insert VTG Magna Parts Tool
Nice vintage part taken off a working greenie shopsmith. Item will ship the next business day after Pay-pal payment has been received. We are American owned and operated. We take pride in everything we do.
|
|
|
Craftsman 113 Series Table Saw Front And Rear Trunion Brackets 2735-1 & 2
I will ship to the United States only. Not sure why these are two different suffixes. Because they appear to be identical. Good condition. No cracks. Free Shipping. Please check my other auctions. I prefer Paypal. But If you'd rather pay by postal M.O. that's OK too. I will no longer accept bids from outside the US. PayPal is NOT accepted from Unconfirmed addresses. When PayPal is used. I will only ship to the address listed w/ PayPal, NO EXCEPTIONS. A signature will be required when the PayPal amount exceeds 250.00. All items are thoroughly inspected and any defects will be clearly noted. If I am not familiar w/ the operation of an item. I will say so. Occasionally. I will sell items for other people, so I must reserve the right to end an auction early, if there are no bids. I will not end an auction early if it has bidding activity. ... morePayment is expected w/in 10 days. If payment is not received w/in 10 days. The item will be re listed. Items are usually shipped w/in 1 business day and occasionally on Saturday. If you’d like clarification on anything. Or additional pics please contact me BEFORE bidding. Additional pics can't be sent through the message system. Please include your email address. Thanks! Craig
|
|
|
FADAL / TROYKE MODEL CTL 10C 4TH AND 5TH AXIS ROTARY CNC TRUNION TABLE
Troyke 5th axis rotary table Troyke CTL Series indexing rotary and 5th axis trunion tilting rotary tables range in size from 6.5" to 10" diameters. The CTL Series range in use from manual. Tilting rotary applications to complex 5 axis machining applications. These heavy-duty tilting rotary tables are interfaced to the machine control as rotary indexers or full 4th and 5th axis, and offer a variety of tooling and workholding options. SPECIFICATIONS: Rotary Axis Specifications: Turntable Diameter(MM) 10.00(254) Standard Thru Hole Dia(MM) 1.1968(50.0) Oversize Thru Hole Dia(MM) 3.000(7.62) Maximum Load Capacity(KG) 150(68) Faceplate T-Slot Width(MM) 47(12) x 4, Standard Total Gear Ratio, 90:1, Max. Speed Range(STD Ratio) N/A, Continuous Torque LBS-FT(NM) N/A, Brake Method, Pneumatic, Brake Torque LBS-FT(NM) 300(407) Programmable Resolution, ... moreN/A, STD. Total Angular Accuracy, +/30 sec. STD. Repeatability, +/10 sec. Unit Weight lbs. KG) 300(136) Ship Weight lbs. KG) 375(170) Tilt Axis Specifications: Standard Total Gear Ratio, 180:1, Max. Speed Range(STD Ratio) N/A, Brake Method, Manual, Brake Torque@ 100 PSI LBS-FT(NM) 200(270) Maximum Tilt Axis Travel, 5/ +110 DEG. Center Height@ 90 Deg Position, 7.00(177.8) Turntable Height@ 0 Deg Position, 10.06(256) STD. Total Angular Accuracy, +/60 sec. STD. Repeatability, +/10 sec.
|
|
|
sears snowblower murray 337029 313883 trunion bearing friction disc
trunion bearing and friction disc in ggod condition.from craftsman model 536.886350. may fit murray. all in phto included
|
|
|
Saw Table With Legs, Insert, And Trunion For Shopsmith Mark V
This is the main saw table in complete condition. All parts move freely. I will ship this ups ground as soon as payment is received. I can also combine shipping on multiple items. Please email me with questions.
|
|
|
Table Saw Table With Legs, Trunion, And Insert From Shopsmith 10er
This is a table and insert for shopsmith 10er. Everything works. It has some light surface rust on the steel parts. I will ship ups ground as soon as payment is received. Email me with any questions.
|
|
|
HAAS TR160 ROTARY TRUNION TABLE. 2009 (APPROX)
OFFERED BY JAMESTOWN MACHINERY. INC. THIS IS IN OUR WAREHOUSE LOCATED IN MEADVILLE, PENNSYLVANIA. IT IS UNDER POWER AND AVAILABLE FOR INSPECTION. THERE IS A SHORT VIDEOS SHOWING THIS FUNCTIONING. EBAY DOES NOT ALLOW LINKS SO YOU'LL HAVE TO DO A LITTLE WORK TO SEE THEM. GO TO YOUTUBE AND SEARCH FOR"JAMESTOWNMACHINERY" Or search for the title of the video. Which is"HAAS TR160 offered by Jamestown Machinery" HAAS ROTARY TABLE Model TR160H SN 902357 MANUFACTURED 2009(Approximately) BRUSHLESS TYPE MOTOR UNIT SPECIFICATIONS FROM WEBSITE FOR A NEW TR160: NOTE: accuracy specs are those of a new unit. As with any used product. Use may affect these specs. PLATTER Diameter 6.3" Max Weight on Platter 80 lb Part Swing Max 17.5" Number of Std T-Slots 6@ 60° SPINDLE A(TILT) Max Speed 0.001 to 80 °/sec Max Torque ... more150 ft-lb Runout Max 0.0005" Backlash 30 arc-sec Gear Ratio 63:1 Timing 2:1 Brake Torque@ 100 psi/6.9 bar 200 ft-lb SPINDLE B(ROTARY) Max Speed 0.001 to 80 °/sec Max Torque 100 ft-lb Runout Max 0.0005" Backlash 30 arc-sec Pilot Bore Dia. through) 1.500(+0.0005. 0) Gear Ratio 63:1 Timing 2:1 Brake Torque@ 100 psi/6.9 bar 100 ft-lb INDEXING A(TILT) Max Rotation/Step 120 ° Resolution 0.001 ° Accuracy(±) 15 arc-sec Repeatability 10 arc-sec INDEXING B(ROTARY) Max Rotation/Step 999.999 ° Resolution 0.001 ° Accuracy(±) 15 arc-sec Repeatability 10 arc-sec GENERAL Power Requirement– 1-Axis Control 115 VAC ± 10% 15 A Air Pressure Max 120 psi Operating Temp(max ambient) 100 °F Duty Cycle(w/o tailstock) 50/100% WEIGHT Table 425 lb CONDITION: THIS TABLE IS IN VERY GOOD CONDITION. IT HAS BEEN TESTED AND FUNCTIONS PROPERLY. IT IS A BRUSHLESS TYPE UNIT. Normal 0 false false false EN-US X-NONE X-NONE CHECK MY EBAY STORE AND OTHER AUCTIONS FOR MORE ITEMS. INCLUDING: SURPLUS TOOLING AND INSERTS FROM A TECHNICAL SCHOOL. ALL EITHER USA MADE OR TOP NAME IMPORTS(SANDVIK. ISCAR, ETC. BORING BARS– We've reduced prices to move them and get you
|
|
|
Shopsmith Mark VII Trunion Lock and Bracket Assemblies -- Pair of Two (2)
Shopsmith Mark VII Trunion Lock and Bracket Assemblies– Pair of Two(2) You are bidding on a used pair(2) of trunion lock and bracket assemblies for a Shopsmith Mark VII. These parts came from a fully functioning unit and they have received a general cleaning. They are in good shape– no breaks or cracks. There are some worn spots in the paint and a touch of surface oxidation on the brackets. This is a complete assembly including the mounting hardware. Check out my other Shopsmith items. Please Read PRIOR To Bidding: I ship only to the 48 contiguous States. Item must be paid for within 48 hours of purchase via PayPal. I’ve provided the best description and photos that I can but feel free to ask any questions before you bid. Regarding my shipping rates. They include mandatory Seller fees taken by eBay(10% and PayPal(3% and a very minimal fee ... morefor my shipping expenses. Many Buyers don’t realize that Sellers are required to pay these fees on the shipping costs as well as the item cost. I’ll do my best to work with you if you purchase multiple items and they can be safely packed together. I do strive for a five star rating and a positive transaction with all customers. My shipping rates are clearly stated with no hidden fees. But please, if you have issues with my rates, you may want to re-think your bid. Thanks for looking and Happy Bidding!
|
|
|
VINTAGE MCDONNELL DOUGLAS OPTICS TELESCOPE MIL SPEC W/ TRUNION AS IS BIN#39
VINTAGE MCDONNELL DOUGLAS OPTICS TELESCOPE MIL SPEC W/ TRUNION AS IS BIN#39 Sold as is. Thanks. TERMS OF USE Welcome to our SILO Ebay store. Please. Review our terms and conditions, which has the purpose to clarify and help for a better business relationship with our customers. If you do not agree with any part of our company policies, please do not do any bidding in our items. IF YOU PLACE A BID IN OUR ITEMS We’ll consider that you have agreed to all the following Term of Use. ITEM CONDITIONS: Please. Make a thoroughly inspection of the photos, description and conditions of each item you are interested, before placing your biding. SILO attempts to be as accurate as possible. However. SILO does not warrant that product descriptions or other content is accurate, complete, reliable, current, or error-free. If a product offered in our store ... moreis not as described, your sole remedy is to return it in unused condition. DISCLAIMER: Many of our items are previously USED products or REFURSBISHED. Therefore they are sold“with all faults” or“AS IS” unless otherwise specify in writing. The condition of the item is provided in the“ description” RETURN POLICY: Our goal is to provide our customer with the best option for their needs. If you need to return item this rules will apply: We offer the buyer a two weeks(14 days) right to return the item. The buyer will be responsible for the cost of packing and shipping the item. Items MUST BE returned for any Refund. We do not offer partial refunds. Refunds will be given as money back. WARRANTIES OR RETURNS: NO WARRANTIES ARE EXPRESS OR IMPLIED. Items that are supposed to be operational according to the description in the listing can be returned if they are D.O.D. Items that are untested or are sold‘AS IS’ can not be returned. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: All ITEMS OR PRODUCTS LISTED IN OUR EBAY STORE ARE PROVIDED BY SILO ON AN"AS IS" AND"AS AVAILABLE" BASIS. UNLESS OTHERWISE SPECIFIED IN WRITING. OUR SILO STORE MAKES NO REPRESENTATIONS OR W
|
|
|
Vintage Delta Rockwell 12" Disc Sander DS-12 Table Trunion Clamp
Original Delta Rockwell DS-12 table trunion clamp for a 12" disc sander in excellent condition. Can be used on either side of the disc sander table. Flat rate 3.95 shipping to lower 48 states only.
|
|
|
Craftsman GT5000 deck lift trunion bracket
Deck lift trunion mechanism from a 2004 Craftsman GT5000 riding mower
|
|
|
J.D. WALLACE NO.16 BANDSAW TABLE TRUNION ASSM. NO RESERVE
jd wallace no.16 16" bandsaw table trunion assembly.has been media blasted& painted.castings are in great shape.No cracks or repairs.brass tag is in great shape it was removed for blasting& painting.serial no. 516497.this is a heavy casting but will fit in a large flat rate box to save on shipping.if you win other parts that i can combine in with it i will.if you have any questins or concerns please dont hesitate to ask.as always no reserve.thanks for looking& happy bidding!
|
|
|
Craftsman King Seeley Table Saw Front Trunion with Scale 103 0214 VINTAGE
Craftsman King Seeley Table Saw Front Trunion with Scale 103 0214 VINTAGE In good shape. Please view photo to see condition. Thank you!
|
|
|
Vintage Sears Craftsman Table Trunion Only~Parts #1
Table trunion. Pulled from a working vintage Craftsman table saw. This insert came from a model 113.27520. But may fit other models. This part is marked T-2735-1 No cracks or breaks anywhere. There some grime build up. This is a very nice part. I SHIP FAST! I SHIP FAST! I SHIP FAST! THANK YOU! Posted with
|
|
|
Browning M2HB Parts BMG 50 - Sear and Trunion Shims
Browning BMG parts as shown from an aircraft 50 cal. Sear and 2 Trunion Shims- good condition.
|
|
|
EMA IO TRUNION BASE UPLIFT 207111-USED
EMA IO TRUNION BASE UPLIFT 207111-USED Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Carr Lane CL-1TR Revolving Trunion
1-888-9WEC2IT(993-2248) Problem? Carr Lane CL-1TR Revolving Trunion. Item Description. Manufacturer Carr Lane, Model Number CL-1TR, Category Business& Industrial Manufacturing& Metalworking Metalworking Tooling Equipment Specific Tooling Fabrication, Cosmetic Wear Item is used and has slight paint chipping on the unit. Functional Condition Functional, Items Included In Listing Carr Lane CL-1TR Revolving Trunion- as shown, madams001. Shipping charges seem too high? Please contact us through"ask a question" on the bottom of this ad with the item number and your postal code and we will investigate shipping charges.if you are an international buyer please provide city. Country, and postal code. Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick ... moreup an item to save on shipping? Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note. Virginia sales tax of 5.3% will be charged for all items locally picked up. We only accept Cash or Credit card payments for all local pick up purchases. Orders not picked up within 2 weeks from the date of purchase will incur a $10 per day storage fee. We have recently moved! Our new address is: C2 Management 351 Station Rd. Suite 8, Berryville, VA 22611. 540-955-5740. Buying more items from us? We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
VINTAGE DELTA ROCKWELL CONTRACTORS SAW FRONT TRUNION AND TILT AND ELEVATION
VINTAGE DELTA ROCKWELL CONTRACTORS SAW FRONT TRUNION AND TILT AND ELEVATION NOTE* TILT AND ELEVATION SHAFTS WILL NEED CLEANED-FOR PARTS PN# 422-02-014-2002 VERY NICE PARTS WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
VINTAGE DELTA ROCKWELL CONTRACTORS SAW TRUNION BRACKET AND BEZEL PULLY GUARD
VINTAGE DELTA ROCKWELL CONTRACTORS SAW TRUNION BRACKET AND BEZEL AND PULLY GUARD PN# 422-02-014-2003 VERY NICE PARTS WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147421d0da1-0x111-
|
|
|
VINTAGE DELTA ROCKWELL CONTRACTORS SAW TRUNION BRACKET BLADE GUARD MOUNTS
VINTAGE DELTA ROCKWELL CONTRACTORS SAW- TRUNION- BRACKET- BLADE GUARD MOUNTS PN# 422-19-095-2002 VERY NICE PARTS WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
VINTAGE DELTA ROCKWELL UNISAW TRUNION YOKE ASSEMBLY LTA -407 NICE
VINTAGE DELTA ROCKWELL UNISAW TRUNION YOKE ASSEMBLY LTA-407 NICE EXCELLENT CONDITION TAKE ALL OR PART-WILL ADJUST SHIPPING FOR PARTIAL TAKE OR COMBINE WITH OTHER WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
VINTAGE DELTA ROCKWELL UNISAW TRUNION 422-04-095-5001 EXCELLENT
VINTAGE DELTA ROCKWELL UNISAW TRUNION 422-04-095-5001* EXCELLENT DISCONTINUED PART# OFF SAW# 34-461 AND THIS WILL FIT OTHERS WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
Rock Shox Deluxe Rear Shock/Damper for GT LTS / STS frame (without trunion)
Up for auction is a shock for GT LTS/STS frames. It came on a GT LTS-1 ~1998. I believe they called this model a Coupe Deluxe. Spring is 750 x 1.4. It has been used and shows moderate signs of cosmetic wear(as seen in the photos) Without the GT trunnion. But it does come with the metal bushings for the upper mount. It still functions but I didn't get to ride test it lately.
|
|
|
Shopsmith Greenie Table Saw Table Trunion Pivoting Assembly & Insert Mark V
PARTING OUT A MARK V GREENIE. JUST GETTING STARTED LOTS OF PARTS STILL IF YOU DONT SEE THE PART YOU NEED JUST ASK.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14755420397-0x10c-
|
|
|
MP44 STG44 TRUNION
Hello. Today for sale I have trunion from famous MP44/STG44. Condition is shown in pictures. Barrel pin is still present, barrel itself is cut and ready to be pulled out. Ps. I don't have any other parts, sorry. Any questions.please ask. Good luck
|
|
|
VINTAGE DELTA ROCKWELL UNISAW TRUNION LTA 406 EXCELLENT
VINTAGE DELTA ROCKWELL UNISAW TRUNION LTA 406 EXCELLENT# OFF SAW# 34-461 AND THIS WILL FIT OTHERS WILL NEED SOME CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
Risse Genesis Damper for GT LTS or STS frame 1997-2000 (Trunion Mount)
Lightly used Risse Racing Genesis damper to fit GT LTS frames: 1997-2000 GT STS/ LTS(Trunion Mount) Oil damped air shock. Genesis damper has internal compression and rebound damping. External air pressure adjustment. It's a lightweight and well performing shock. p/n 50278 285 grams. I got this as an upgrade but my frame broke shortly afterward. So someone can get a good deal on this. They are $198 new. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1477bb89488-0x11c-
|
|
|
Excellent Trunion M2hb m2 browning ma deuce
M2hb trunion in excellent condition. Is covered in grease but doesn't have any issues to hide. This was going to be my last build but other things have gotten in the way.
|
|
|
2014 Haas VF-3SS 5 Axis CNC Vertical Machining Center / Mill + TR-160 Trunion
For sale is a fully loaded VF-3SS + 5 Axis Trunion that was manufactured at the end of May. 2014 and was placed into service with us at the end of June. Price from Haas was $149,500($162,000 after tax) and there is a 2 month waiting list to get these right now. Unfortunately when we ordered this we were busy, but 2 months later when they finally delivered it to us we no longer have enough work to keep it busy. This listing is for a combination of both the VF3-SS and TR-160 5 Axis Trunion. We may consider selling them separately but prefer not to. This machine is in perfect condition. And under factory warranty until June, 2016. If you have any questions feel free to call 714-657-88 thirty-three. It's powered up and in service in Santa Ana, CA. No dealer inquiries. We are not desperate to sell this so please don't lowball. Again, NO ... moreDEALERS! eBay requries us to list PayPal as an option for payment but obviously we can't accept paypal for this type of transaction. On a side note. If you are cross shopping this with the VF-2SS TR, don't get the VF2. The VF-2 does not have enough Z axis travel to let you do much of anything with the 5 axis trunion on the table, which is why we use the VF-3 which has an extra 5 inches of clearance. We have two other identically configured VF-3s that work great. Machine is a VF-3SS with the following options: TR-160 160 mm(6.3" Tilting 2-Axis Trunnion Rotary Table. With scale feedback on the A(tilting) axis. Requires Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis operation. Scale feedback functional only on Haas mills with software version 18.xx or later. Scale feedback does not function with rotary control box. $ 32.595 TSC: This high-pressure coolant system provides up to 300 psi(21 bar) of coolant to the cutting edge for heavy cuts. Higher feedrates, deep hole drilling and better surface finishes. $5.995.00 ACF: This 25-micron. 2 bag-type filter system removes contamination and minute particles from the coolant before they can be recirculated
|
|
|
2001 HAAS VF-6 w/5axis Trunion
2001 HAAS VF-6 VERTICAL MACHINING CENTER CNC CONTROL: HAAS General Specifications: Travels: X Axis: 64" Y Axis: 32" Z Axis: 30" Spindle: Taper Size: CAT 40 Speed(RPM) 7.500 Spindle Motor Max Rating: 20 Horsepower Tool Changer: Capacity Standard: 24 Side Mount Miscellaneous: Voltage: 220 Options: Control Haas P-Cool MACHINE FEATURES: Chip Auger Rigid Tapping INCLUDES HAAS TR-210 TILTING 2-AXIS. 210mm/8.27" TRUNNION TABLE View YouTube Video https:www.youtube.com/watch?feature=player_embedded&v=MTRfw11j3vc QUESTIONS: PLEASE CONTACT MIKE@ 714-892-9800 SHIPPING QUOTES: PLEASE CONTACT tims@abbafreight.net
|
|
|
Table Trunion from Craftsman Contractors Table Saw 113.XXXX
One Table trunion from Craftsman 113.299410 table saw. The part number is 62833. All 4 are in excellent shape. I don't like how dark the last picture is. They are more like the color in the third picture. Will combine. Both will fit in a small flat rate box. Shipping outside the lower 48 may be higher.
|
|
|
Fadal 4th Axis CNC Rotary Table with Heavy Duty Trunion Table
For sale is a Fadal VH65 4th Axis CNC Rotary Table. It is used but in good working order. Included is a Heavy-Duty Trunion Table with a working area of 24" x 8" Model# VH65. Serial# 052007052988. Ratio- 90:1. Brake On- M60. Brake Off- M61. This item is Local Pick-up ONLY. We are located in Willoughby. OH(ZIP Code 44094) We are starting with an opening bid of only $100- with NO RESERVE! Also. Be sure to check out our other auction(Cleveland Horizontal Milling Machine)
|
|
|
Vintage Delta 34-500 Table Saw Front Trunion Bracket Tab 102 plus screws
Front trunnion bracket from a Delta Rockwell Homecraft 34-500 Table saw. Might fit several saws of the 34- series. The nice thing about Delta at the time was that there was only one Tab 104. No wondering if you were looking at the right part. And the small parts. SP-608 2X LTA 520 2X According to the article on the Vintage Machinery web site. It was manufactured in Tupelo Miss in 1952. ser AC-320) Anyway. It clean and dry and ready for spray paint if your refurbishment is going that far. Unless you need to color match. This part doesn't need it. Will combine. and if you are buying several parts. Worth it) This thing is like 4lb 2oz packed. That's 14oz waiting to be filled. Just give me some warning by leaving a note or using shopping cart. Shipping outside the lower 48 may be higher.
|
|
|
Vintage Delta 34-500 Table Saw Front Trunion Tab 104 plus screws
Front trunnion from a Delta Rockwell Homecraft 34-500 Table saw. Might fit several saws of the 34- series. The nice thing about Delta at the time was that there was only one Tab 104. No wondering if you were looking at the right part. And the small parts. TAB 159 SP 612 SP 108 SP 1029 SP 301 SP 1029(2ND) DDL 256 SP 2372 According to the article on the Vintage Machinery web site. It was manufactured in Tupelo Miss in 1952. ser AC-320) Anyway. It clean and dry and ready for spray paint if your refurbishment is going that far. Unless you need to color match, this part doesn't need it. There was some persistant dirt visible in the third picture. But a toothbrush got it. The first two teeth on the gear were factory removed to provide clearance. Will combine. and if you are buying several parts. Worth it) Just give me some warning by leaving ... morea note or using shopping cart. Shipping outside the lower 48 may be higher.
|
|
|
Vintage Delta 34-500 Table Saw Rear Trunion Tab 105
Rear trunion from a 34-500 ser number ac-320 Table saw. According to the article on the Vintage Machinery web site. It was manufactured in Tupelo Miss in 1952. The nice thing about Delta at the time was that there was only one Tab 105. No wondering if you were looking at the right part. The dark area under the curved portion of the part in the second picture is plain cast iron. Not corrosion or pitting. Looks like oil dripped down and damaged the paint. Anyway. It clean and dry and ready for spray paint if your refurbishment is going that far. Will combine. and if you are buying several parts. Worth it) Just give me some warning by leaving a note or using shopping cart. Shipping outside the lower 48 may be higher. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-147c80af939-0x107-
|
|
|
Vintage Delta 34-500 Table Saw Rear Trunion Bracket Tab 103
Rear trunion from a Delta Rockwell Homecraft 34-500 Table saw. Will fit several saws of the 34- series. The nice thing about Delta at the time was that there was only one Tab 105. No wondering if you were looking at the right part. Oh. And a couple of screws. They would be SP 608 and washers LTA 520. isn't the internet great) According to the article on the Vintage Machinery web site. It was manufactured in Tupelo Miss in 1952. ser AC-320) Anyway. It clean and dry and ready for spray paint if your refurbishment is going that far. Unless you need to color match, this part doesn't need it. Will combine. and if you are buying several parts. Worth it) Just give me some warning by leaving a note or using shopping cart. Shipping outside the lower 48 may be higher.
|
|
|
Lot of 6 Motorola Mid Power Trunion Key Lock Mount Model HLN6372A
I am offering a lot of SIX(6) locks! Retired after company upgrades. Kept in storage as backups but never used! Thanks for looking and good luck bidding! NOTE: Shipping quote is for the CONTINENTAL U.S. only- Alaska. Hawaii and Puerto Rico need to contact us for a shipping quote. TERMS AND CONDITIONS NO SHIPPING OUT SIDE THE UNITED STATES Please Do Not Ask For Exceptions Payment must be received within 7 days. Florida residents must pay 7% sales tax. We combine shipping cost on multiple items won depending on size and weight. If using Paypal to make payment. Your address must be confirmed with PAYPAL or I will return the payment. No returns on AS-IS items. DOA warranty items must be returned within 7 days of receipt. Upon S/N verification a credit or exchange will be made based on our inventory. Please be certain you can use what you are ... morebidding on as incompatibility is not a valid reason for return. Powered by SixBit's eCommerce Solution
|
|
|
GROEN BRAISING PAN TRUNION RACE CASTING 12951 New one $434.00
up for auction is a used GROEN BRAISING PAN TRUNION RACE CASTING 12951 New one $434.00 Please check online price New one over $434.00 ACTUATOR. 51 CFPC/CHFP GROEN BRAISING PAN: FPC, FPC/1, FPC/1-2, FPC/1-3, FPC/1-4, HFP/2, HFP/2E, HFP/2E-2, HFP/2E-3, HFP/2E-4, MW/FPC, MW/FPC/1, NHFP/2E all GROEN BRAISING PAN SERIES: HFP. New one over $147.65 + shipping cost. Please read item description and sales terms and condition before bidding. By bidding. You are agreeing to all the terms and conditions of this auction. Please click photos for item details. What you see in the pictures is what you get. Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. Payment All payment must be made within 3 days after auction ... moreends. Payment method: Money Order. Personal or Business Check, Cashier's Check, Paypal Shipping Item Location:Pensacola. FL winning bidder pays actual UPS shipping cost. shipping weight is Lbs.+/ with packing. There is a handling fee of $0.00. Local pick ups are always welcome after full payment is made. Local pick ups always No Handling cost. We Will NOT Be Responsible For Freight Damages After Merchandise Leaves Our Warehouse. Item(s) Should Be Inspected At Time Of Delivery. For Any Damages That May(although rare) Have Occurred During Shipping. Driver Should Be Made Aware Of Damages Before Leaving Your Location. Bill Of Lading Should Be Noted and Signed(all copies) By You and The Driver. Freight Claim Should Then Be Filed Promptly. Used Items may not be returned because they do not meet the buyers needs. This means that if you buy a piece of equipment to perform a task that may not be it's original purpose. We would be unable to exchange the item. We urge you to ask as many questions as you feel needed before making your purchase. Return We offer a 7-day money back guarantee only on the items which are not same as item descriptions. With the following conditions:
|
|
|
2009 Haas TM-3P 5-Axis VMC Vertical Machining Center w/ TR-110 Trunion Table
Haas TM-3P 5-Axis Vertical Machining Center w/ Trunion TR-110 Table Haas Tool Room Mill 40" x 20" x 16" Includes: 7.5 H.P. 6,000 RPM, Visual Quickcode Programming. 1 Megabyte Memory, Full Enclosure, USB Port, 15" Monitor, 10 Position ATC Chip Auger High Flow Coolant Pump Kit for Tool Room Mill Programmable Coolant Nozzle Spindle Orientation Rigid Tapping 16 Megabytes Expanded Memory Wireless Probing System. Includes: Renishaw Tool Offset& Spindle Probes 4th Axis Brushless Drive 5th Axis Brushless Drive Work Light CT-40 Haas 110mm True 4th& 5th Axis Trunion Rotary Table, We reserve the right to cancel the auction of this item at any time due to Private Sale Payment Policy We accept payment by wire transfer. Must pay by wire transfer within 48 business hours from auction end. If payment is not received by our bank ... morewithin 72 hours of auction end. Item will be re-listed without notice. An Unpaid Item Dispute will be filed for any and all unpaid items. Additional bank and wire transfer surcharges may apply. Shipping Information Additional Fees(i.e. Skidding. Loading or Special Packaging) may apply to item if required, according to size and type. Item will be shipped 5-7 business days after payment is received. Buyer is responsible for all Rigging and Trucking cost. Winner notifications will be sent to Ebay registered email address. Email us for shipping quotes Email us questions. Or to get a phone number to speak with us about a machine New. This machine with these options would cost $88,930! This is an awesome deal!
|
|
|
*LARGE* Haas 4 Axis Table 4th Axis Rotary Trunion Indexer
Machine MUST BE sold. Email us for more photos- Video- info! CLICK HERE to Email Nu Tek Sales! You are bidding on a Haas 4th Axis Table as shown! This unit was on a machine taken from manufacturing floor a few months ago. Currently in storage. The machine was not ran at the facility for almost one year before it was removed. We are not sure if there were any known problems with this unit, but we do not believe so! Email for more information or photos by clicking here: Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual prep/ skidding/ loading charges of $50.00. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
Craftsman Table Saw Trunion Guides and Hardware fits 315.228390
This auction if for the trunion guides. Hardware, and lock handle off of a Craftsman table saw. The model number of the table saw is 315.228390 but it will fit other models, as well as some Ryobi models.
|
|
|
DoALL MOD: M L TABLE, TRUNION, SAW PARTS
DoALL. MODEL M L VERTICAL BAND SAW TABLE, 24" X 24" COMPLETE W/ALL MOUNTING HARDWARE AND A REPAIRED, TRUNION ASSEMBLY. NOTE; the repaired trunion assembly was used for years w/no problems and appears to be accurate. asking $185.00 for the table the trunion assembly is free w/purchase. thanks rick
|
|
|
Wascomat TD3030 Dryer Trunion 487231969
Wascomat TD3030 Dryer Trunion 487231969
|
|
|
Table Trunion 62833 for 113298761 Sears Craftsman 10" Table Saw FREE SHIPPING
Used. Good condition. FREE Shipping and handling in the US. Will ship after payment clears. 5-16-12 bin44 Michigan residents add 6% sales tax. Please be sure of application. A 30% restocking fee applies if returned. Thanks.
|
|
|
VINTAGE DELTA ROCKWELL UNISAW GEARED TRUNION 422-04-095-5001---LTA-405 EXCELLENT
VINTAGE DELTA ROCKWELL UNISAW GEARED TRUNION 422-04-095-5001-LTA-405* EXCELLENT DISCONTINUED PART# OFF SAW# 34-461 AND THIS WILL FIT OTHERS WILL NEED SOME LIGHT CLEAN UP AS FOUND WE COMBINE SO SEE OTHER AUCTIONS AND PLEASE ASK QUESTIONS IF NEED BE
|
|
|
Vintage Walker Turner BN730 12" Band Saw Complete Geared Table Trunion
Complete geared tilting table trunion for a BN730 12" band saw. Complete with locking handle. The teeth on the knob and the trunion are very good. No missing teeth. Includes mounting plate and bolts.
|
|