|
|
Order by: Available to: eBay Affiliate Links
|
Free Shipping Condition: Used Location: Spring, United States A rare original South Bend rotary table. see photo. Restored to very nice condition, cleaned, lubed, adjusted. All features work exactly as original. ... moreHardened and ground indexed bed, swing-away worm gear for quick positioning of the table, one full handle turn is 5 degrees on the table. Unique collar locking mechanism works well. Nice SB logo.14 pounds. Rare and hard to find like this. Free US shipping. Catalog number CE9144.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 2.5" /65mm 3 jaw mini lathe chuck with MT1 and MT2 arbors.Perfect for small lathes with Morse Taper 1 or Morse Taper 2 spindles.Thru hole diameter: 9/16"TIR: ... more0.025mmArbor connection threads: M14x1mm3 jaws are reversible.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 2" /50mm 3 jaw mini lathe chuck with MT1 and MT2 arbors.Perfect for small lathes with Morse Taper 1 or Morse Taper 2 spindles.Thru hole diameter: 1/2"TIR: ... more0.025mmArbor connection threads: M14x1mm
Buy It Now
Free Shipping Condition: Used Location: Endicott, United States Up for auction is a pair of vintage Atlas vise jaws including a of shop-made movable jaw. These fit the Atlas/Craftsman cross slide x/y table used on ... moredrill presses. The table top from that is also used as a boring table on Atlas/Craftsman lathes. So these can be used to hold work for boring on the table. Note that the Atlas/Craftsman cross slide x/y table or boring table is NOT INCLUDED! The block and bolts have good threads. The original nuts that clamp in the t-slots are there. There are some minor dings. Paint chips and spots of rust, but overall they are in very good shape. There are no cracks or repairs. The vise includes a shop-made movable jaw. Most of these are missing the original jaws. The Fine Print Note that any terms and conditions specified above. Such as local pickup only, supercede conditions in the"fine print" Bidding When you bid on an item. Your bid is your contract. You are bidding to own it. All questions should be asked prior to bid placement. Do not bid if you are not sure. Questions will be answered as soon as possible. Monday through Saturday. Questions during the work day will be answered at lunchtime or after work. My employer is not paying me to eBay. Do not assume anything. I will try my best to describe items. However I do not know everything about everything(just ask my wife) If there is something you want to know, ask. I will be more than happy to answer to the best of my ability. Confirmation and payment Winning bidder must confirm bid by email within three days after auctions close. Payment must be made within seven days of the Auctions close. Payment must be made by Paypal(hey. It sucks, but it's their rules, not mine) Unless the exact ACTUAL shipping costs are specified in advance. PLEASE DO NOT SEND PAYMENT UNTIL YOU RECEIVE EMAIL FROM ME INDICATING THE ACTUAL TOTAL. Do not assume that ebay's shipping calculator is correct. Shipping Your ship to address must match your Paypal address. If you do not have a confirmed address I will not accept Paypal payments. S
Buy It Now
$115.45 Shipping Condition: Used Location: Oregon, United States South Bend Lathe Heavy Ten Taper attachment Well here is another South bend lathe part this is a taper attachment you will be getting what you see and ... moreas you can see it is not removed from the lathe yet. Thank you for your Business! Shipping will be 50.00! God Bless!
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Haas HA5C Spindle Cover. Protect the threads on your Haas HA5C rotary, or your Hardinge lathe with a 2-3/16"-10 thread. I also think the red just looks ... morenicer. also fits Hardinge. Compare to Haas part number 20-2072.
Buy It Now
Free Shipping Condition: New Location: New York, United States 70mm 4 Jaw Independent Chuck. 70mm 4 Jaw Independent Chuck:-. 4″ (100 mm) Rotary Table. Backplate is drilled and counterbored to fit a range of 3” and ... more4” rotary tables with 4 Slots. Vertical Center Height 2-1/16″ (Approx. ).
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States Front Mounting for rotary table. Back mounting recess dia: 130mm. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS.
Buy It Now
Free Shipping Condition: New Location: United States Center Height: 65mm. Stretch distance:50mm.
Buy It Now
$37.07 Shipping Condition: Used Location: Flourtown, United States Here is a Enco 84440 Co-Ordinate Table XY with Rotating Base. Lightly used. All knobs operate smoothly. Fairly clean. Ready to work with no issues. Base ... moreis 10" x 8-3/8". Table is about 9-1/4" x 6-1/2".
Buy It Now
Free Shipping Condition: New Location: United States Fourth Axis of Engraving Machine (A Axis, Rotary Axis, CNC Indexing Head). Center height: 65MM.
Buy It Now
$160.00 Shipping Condition: Used Location: Macedonia
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States 4" 100mm Rotary Table Tilting With 3 Jaw 65mm Mini Lathe Chuck Milling Machine. Rotary Tables Tilting 4″ (100 mm). Type : Tilting. 3 Jaw Self Centering ... moreChuck 65mm Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India HV 4" Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Back Plate. 70mm 4 Jaw Independent Chuck. 70mm 4 Jaw Independent Chuck:-. 4″ (100 mm) Rotary ... moreTable. Backplate is drilled and counterbored to fit a range of 3” and 4” rotary tables with 4 Slots.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Rotary Tables Tilting 4″ (100 mm). Type : Tilting. 3 Jaw Self Centering Chuck 65mm Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw. Body is made ... moreof graded cast iron. Table Dia 4″ (100 mm). The table is Graduated 0 – 360º in 5 min divisions.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States A great combo of Tilting Rotary table (3"in 75mm & 4"in 100mm) with 4 jaws self centering chuck ( 50 & 65mm) with back plates & T-nuts. 4 Jaws Self Centering ... moreChuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
Buy It Now
Free Shipping Condition: New Location: China The product contains a machine punch, 6mm thimble pin,1 plum thimble and 3 hex wrenches. Color: Silver.
Buy It Now
$173.47 Shipping Condition: Used Location: Lockport, United States Location: universal lathe parts, Gartland Gaylord.
Buy It Now
Free Shipping Condition: New Location: Sterling Heights, United States dear sir, we informing you that as a seller we are no responsible for any kind of fees , duties , charges .please confirm us so that we dispatch your ... morearticle thanks Sehr geehrter Herr, wir informieren Sie, dass wir als Verkäufer nicht für jegliche Art von Gebühren, Zöllen, Abgaben verantwortlich sind.bitte bestätigen Sie uns, damit wir Ihren Artikel versenden können Danke
Buy It Now
$60.00 Shipping Condition: Used Location: Ann Arbor, United States Of the Emco Maximat FB-2 mill and Emco Maximat Super 11 lathe cross slide table. This is a great addition for your Emco Maximat FB-2 Mill and Super 11 ... morelathe. The table includes mounting hardware for an Emco Maximat FB-2 milling table and.
Buy It Now
Free Shipping Condition: New Location: Bawana S.O, India Hand wheel is graduated in divisions of 10 min & can be set to zero. Provided with oil nipple for oiling of inside body. Setting grub screw to dial and ... moreadjust the table to horizontal flat @ 0 degree is being given along with a locking screw to lock the table at the desired position.
Buy It Now
$17.21 Shipping Condition: New Location: HEBDEN BRIDGE, United Kingdom The Backplate has a 95mm recess to locate your chuck, This can be simply reduced or removed by facing in your lathe. ROTARY TABLE BACKPLATE 2MT. 125mm ... moreRotary Table Backplate.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Pratt 7-1/2” on a 10” flat back plate for mounting on a rotary table. This is not a rotary table, it is a chuck to be mounted on your rotary table. Actual ... moreitem pictured.Be sure to view our other items for more great tooling finds.
Buy It Now
$5.00 Shipping Condition: New Location: United States Store Categories. Click to close full size. For warranty information. ADVANTAGE PLUS 15501 Carbide Lathe Tool Set.3/8 In. ADVANTAGE PLUS. Item Specifics. ... moreItem. Lathe Tool Bit Set. Type. Single Point Brazed Carbide Tipped. Type. Single Point Brazed Carbide Tipped. For Use With. Lathes. Number of Pieces. 11. Shank Dia. In. 3/8. Application. Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face. Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off. Dia. 3/8. Capacity. 3/8" Shanks. Item. Lathe Tool Bit Set. Includes. 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $25 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $25 or more before tax. Not all products qualify for the above Shipping Policy. Additionally. Standard shipping rates will apply for all orders to Alaska and Hawaii. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer services hours are Monday through Friday from 7am to 7pm(central) Include a copy of the original order confirmation or packing slip with your RA paperwork as proof of purchase. Returns received at Zoro without a RA number may be assessed a 15% restocking(processing) fee that will be deducted from any
Buy It Now
Free Shipping Condition: New – Open box Location: United States
Buy It Now
$36.25 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 8" base adapter plate is ideal to use on 8" rotary tables of either 3 or 4 slots to mount either 6" 3-jaw ,6-jaw or 4-jaw self-centering lathe chucks.This ... morebase adapter plate can also be used on milling, drilling machines if you remove the MT3 stub on the center of the plate.Morse taper 3 stub on the center of plate to fit 8" rotary tables and guarantee proper TIR accuracy. 4pcs 3/4" table slots T-nuts and 10mm bolts included for mounting the plate.Recess diameter: 130mm3 chuck mounting holes circle diameter: 142mmMade of tough and strong illuminum alloy.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Buy It Now
$55.43 Shipping Condition: Used Location: Lockport, United States Gold International Machinery Corporation | 5C Indexing Spin Jig Our Inventory Number: 1376-700 Technical Specifications: Accepts 5C collets up to 1-1/16" ... moreIndexing plate has 36 holes in 10 degree increments, Vernier on back calibrated every 1 degree, Collet locks in position for retained accuracy under load, 2-5/16" spindle travel for flute grinding, Usages: milling machines. Grinders, layout work, Estimated weight: 30 lbs. Equipped With: Set of(17) 5C round collets 1/16" to 1" By 16ths, This item is in very good condition! Please inquire for a rate via UPS Ground to your location. Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommen
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States A great combo of Tilting Rotary table (3"in 75mm & 4"in 100mm) with 3 jaws self centering chuck ( 50 & 65mm) with back plates & T-nuts. 3 Jaws Self Centering ... moreChuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India 70mm 4 Jaw Independent Chuck. Backplate is drilled and counterbored to fit a range of 3” and 4” rotary tables with 4 Slots. 70mm 4 Jaw Independent Chuck:-. ... more4″ (100 mm) Rotary Table. Supplied complete with a key as well as set of tee nuts and studs to secure it into place.
Buy It Now
Free Shipping Condition: New Location: New York, United States This set includes 65 mm Self Centering Chuck with Backplate and mounting T-Nuts and Bolts. Rotary Table has 4 Tee Slots. M6 Clamp Kit. Situated at the ... moreindustrial hub of India we specialize in providing complete tooling solutions.
Buy It Now
$160.20 Shipping Condition: Used Location: Yorktown, United States Condition is "Used".
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Backplate is drilled and counterbored to fit a range of 3” and 4” rotary tables with 3 Slots or a 4 Slots. Backplate Size: 80 mm. Backplate Threaded: ... more14 x 1.
Buy It Now
$173.47 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
Condition: New Location: Madison Heights, United States BS-2 Precision Dividing Head. Headstock adjustable from 10 downward to 90 degree upward from the horizontal position. Including headstock. 8" 3-jaw ... morelathe chuck, tailstock, center&driving dog, threaded back plate& 3 dividing plates. 1:40 ratio. Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12& 24. Accessory plates provide indirect dividing in any number from 2 to 50 and from 52 to 380 except prime numbers and certain other numbers. Swing: 9-1/4" Center Height: 5-1/4" Headstock Taper: 10 B&S. Weight: 200 bls.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 6" base adapter plate is ideal to use on 6" rotary tables of either 3 or 4 slots to mount either 4" , 5" 3-jaw ,6-jaw or 4-jaw self-centering lathe chucks.This ... morebase adapter plate can also be used on milling, drilling machines if you remove the MT2 stub on the center of the plate.Morse taper 2 stub on the center of plate to fit 6" rotary tables and guarantee proper TIR accuracy. 4pcs 5/8" table slots T-nuts and bolts included for mounting the plate.Made of tough and strong illuminum alloy.4” chuck recess diameter: 72mm5” chuck recess diameter: 95mm
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Buy It Now
Free Shipping Condition: New Location: Zakhira S.O, India ROTARY TABLE. -Backplate is drilled and counterbored to fit a range of 3” and 4” rotary tables with 4 Slots. Supplied complete with a key as well as set ... moreof tee nuts and studs to secure it into place.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India Type: Tilting. Gear Ration 36 : 1. This comprises a good quality 65 mm dia Slim Body 3 jaw chuck with reversible jaws and adjusting bars mounted on a ... moreslotted backplate. 3 Jaws Chucks (65 MM) on Backplate for 3″ & 4″ Rotary Tables.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States TILTING ROTARY TABLE WITH 4-JAW INDPENDENT LATHE CHUCK DIA. 2-1/4" (70mm) & BACK PLATE + FIXING T-NUTS BOLTS. Quality Low Profile Rotary Table. A great ... morecombo of Rotary table with independent lathe chuck with back plates & T-nuts.
Buy It Now
Condition: New Location: Saint Charles, United States SHARS 10" 3 jaw Front Mounting Self Centering Scroll Lathe Chucks 2 Piece Jaw Code:202-6190 SHARS 10" H/V Rotary Table w/ 10" 3 jaw Front Mounting Self ... moreCentering Scroll Chuck. SHARS 10" Dividing Plate For 8-14" Horizontal and Vertical Rotary Table NEW.
Buy It Now
$143.25 Shipping Condition: Used Location: Lockport, United States 9” Lufkin Rule Co. How cool is this item! Let me know if you have any questions& thanks for looking. due toproblems in the past, no international ... moreshipping) LET ME KNOW if you win more than one of my listings so I cancombine shipping for you. INV#28.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Rotary Tables 3″ (Tilting). Type: Tilting. 4" / 100mm Rotary Table Tilting 4 Slots 3 T Slots for fixing work to easily clamp chucks. Gear Ration 36 : ... more1. 4" / 100mm Rotary Table Horizontal Vertical 4 Slots.
Buy It Now
$160.20 Shipping Condition: Used Location: Yorktown, United States Condition is "Used".
Buy It Now
Free Shipping Condition: New – Open box Location: United States
Buy It Now
$24.75 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States This Vertical Milling Slide is a direct fit on your Myford 7 or Super 7 and can be fitted to many other popular machines. Bluefox Tools comprises of a ... morededicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards.
Buy It Now
$65.50 Shipping Condition: New Location: Madison Heights, United States Front Mounting for rotary table. Back mounting recess dia: 130mm. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom reversible JAWS.
Buy It Now
Free Shipping Condition: For parts or not working Location: Stuart, United States Digital photographs are taken.
Buy It Now
$35.00 Shipping Condition: Used Location: Ann Arbor, United States I picked this up recently with an Emco Maximat lathe. Contraindications: This is not an Emco production item so there are no instructions. Currently the ... morerotary table has a Microkinetics 175 ounce NEMA 23 stepper motor.
Buy It Now
$208.46 Shipping Condition: New Location: Madison Heights, United States BS-1 Precision Dividing Head. Headstock adjustable from 10 downward to 90 degree upward from the horizontal position. Including headstock. 6" 3-jaw ... morelathe chuck, tailstock, center&driving dog, threaded back plate& 3 dividing plates. 1:40 ratio. Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12& 24. Accessory plates provide indirect dividing in any number from 2 to 50 and from 52 to 380 except prime numbers and certain other numbers. Swing: 9" Center Height: 5-3/64" Headstock Taper: 9 B&S. Weight: 110 bls.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Rotary Tables Tilting 4″ (100 mm). Type : Tilting. 3 Jaw Self Centering Chuck 65mm Dia M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw. Body is made of ... moregraded cast iron. Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards.
Buy It Now
$199.30 Shipping Condition: New Location: China Clamping principle: Air source (5-8 kg air pressure) is used to push the inclined part of the chuck from bottom to top to realize the pneumatic clamping ... morefunction. Can improve work efficiency by about 50%.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Rotary Tables Tilting 4″ (100 mm). 4 Jaw 70mm Independent Lathe Chuck. ROUND VISE 3"(80 MM) SPECIFICATION. · Jaw Width : 54 mm Jaw Depth: 20 mm Jaw Opening ... more: 32 mm Height : 29 mm. Chuck Dia.2-3/4" (70mm).
Buy It Now
$143.25 Shipping Condition: Used Location: Lockport, United States VINTAGE ATLAS-CRAFTSMAN 12" METAL LATHE FOLLOW REST L4-398 EARLY 1950s This rest by number goes back at least to 1951 for an ATLAS-CRAFTSMAN 12" ... morelathe. Comes as shown. Ships at 3 lbs. Please email with any questions BEFORE you bid or order. We try to describe each item as accurately as possible. And want the bidder to be confident that the item is what they want. Our feedback record proves that we are trusted. We treat folks right. WE USUALLY SHIP WHICHEVER WAY IT WILL BE MOST AFFORDABLE TO YOU. IF YOU HAVE ANY PREFERRENCE OF SHIPPING THAT DIFFERS FROM OUR METHOD. PLEASE STATE IT IN ADVANCE. WE WILL BE HAPPY TO SHIP IT YOUR WAY, BUT YOU MUST LET US KNOW IN ADVANCE! If you are close to Beaver Falls. PA(Western PA 40 miles north of Pittsburgh and close to Ohio and West Virginia) you can certainly drop by and pick up your purchase during our store hours. You are invited. Just plan on staying a while. It is a* TRUE TOOL EXPERIENCE* If you have a problem with the transaction or the item received please call us or write us before you go negative with feedback. We will work it out. If you bid and buy something that does not fit YOUR needs. But is not our fault we will have to charge a 10% restocking fee. Any returned item must be in the same condition as when you received and in salable condition. If it has been altered or marred or pulled apart return privilege is voided. So be sure that the item you bid on or buy is what you need. Check your own specs first. Saves us all a lot of hassle and everyone is happy. And that's how we like it. Happy-Happy-Happy. We never charge handling charges. When we ship via UPS. We use* RECYCLED BOXES& PACKING* and charge only what UPS charges us. When applicable(if it is the best price for the buyer) we will ship U S P S. We get you the absolute best prices for truck freight shipment on larger
Buy It Now
$73.37 Shipping Condition: Used Location: Lockport, United States Description Tool is in good condition as pictured. It has not been painted or engraved. Shank measures approx 0.35" wide and 0.75" tall. Please ... morefeel free to ask any questions. Thanks for looking. for more great items! Payment We accept PAYPAL payments. Please make payments within 36 hours of purchase. Shipping We ship within 48 business hours of cleared payment. We will combine shipping whenever possible with no handling charges. Thanks for looking. Have a great day! txzj pxzj229 txzj-4 txzj1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*1667b7%3E-13def1ce90e-0xf6-
Buy It Now
$112.74 Shipping Condition: New Location: Saint Charles, United States SHARS 8" HIGH QUALITYHORZ VERT ROTARY TABLE WITH 8" 3 JAW SELF CENTERING Scroll CHUCK NEW. Located by chuck's jaws, high TIR. The tools's TIR reaches ... moreChuck's TIR 0.003" and rotary table's TIR when you turn the handle to divide degree, because the center of tools and the center of chuck are coincide.
Buy It Now
$150.00 Shipping Condition: New Location: Weslaco, United States IN THIS AUCTION YOU ARE GETTING A Kitagawa B210 Three Jaw Power Chuck This Chuck RETAIL’s/ LIST PRICE IS $6000.00 DON’T PAY THAT HERE& WE ALSO ACCEPT ... more$$$BEST OFFER$$$ AND YES! WE LOOK AT ALL OFFERS AGAIN THIS ITEM IS USED AND IS IN GREAT WORKING ORDER( CHUCK WAS ONLY USED A FEW TIMES) PLEASE LOOK AT PIC Features and Benefits Key Features Chuck Diameter(mm) 254.00 Chuck Diameter(Inch) 10 Number of Jaws_3 Mount_Plain Back Through-Hole Diameter(mm) 75.00 Through-Hole Diameter(Decimal Inch) 2.9528 Chuck Actuation Style_Drawbar Operation Type_Hydraulic Jaw Interface Type_1.5mm x 60 Serrated Minimum Jaw Capacity(mm) 31.00 Maximum Jaw Capacity(mm) 254.00 Jaw Stroke Diameter(mm) 8.80 Piston Stroke Length(Decimal Inch) 0.9840 Maximum Drawbar Pulling Force(kN) 43.00 Maximum Static Gripping Force(kN)111.00 Force Per Jaw(Lb. 24449.00 Moment of Inertia(kgf/m) 0.3150 Maximum RPM_4200 Body Material_High Speed Steel Power Cylinder Compatibility_S1875 Kitagawa's leading power chuck can be used with both hard and soft jaws Three-jaw and two-jaw wedge style power chucks deliver up to 20% more speed. Gripping force, and bore size when compared to conventional chucks. The B200 Series Chucks have the largest bores of any wedge style power chuck. These deliver consistent accuracy and repetitive chucking. B200 series chucks are manufactured from high grade alloy steel. All sliding surfaces are hardened and ground to assure consistent accuracy and performance. Special Features: Large Thru-Hole• Strong Clamping Force• High Speed• Compact and Lightweight• Direct Mount a
Buy It Now
Free Shipping Condition: New Location: El Monte, United States Rigid Caste Iron construction. -- 3" /75 mm & 4" /100 mm & 5" /125 mm 3 Slots Regular Rotary Table graduated 360 degrees & designed for smaller milling ... moremachines, pick up the size from drop downs.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States A great combo of Tilting Rotary table (4"in 100mm) with 4 jaws self centering chuck (65mm) with back plates & T-nuts. 4 Jaws Self Centering Chuck M14 ... morex 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
|
|
|
|
Jacobs Spindle Nose Lathe Chuck Model 91-T1
Jacobs Spindle Nose Lathe Chuck Model 91-T1 Questions? Call Robert at 607-259-5615 Very Good Condition 1 Flex collet 34-B
|
|
|
Bridgeport Southbend Lathe Milling Machine Saddle Gib Tapered Knee 11.5" #19
Condition: Good used condition. Surface rust, sharp edges, Please ask any and all questions prior to auction close as this item is sold a s is with no warranty or returns. Feedback. WE WANT POSITIVE FEEDBACK- Feedback left after feedback received! Did you know? On eBay. A NEUTRAL feedback rating is treated exactly the same as a NEGATIVE feedback? Please do not leave a negative or neutral feedback without contact from us to help resolve any issue! We are committed to satisfaction of your purchase. If you are not satisfied with your purchase in anyway please give us an opportunity to make it right before leaving feedback. You may ask a question through ebay's contact a seller section. CUSTOMER SERVICE all out of country bidders please ask about the cost of shipping to your country
|
|
|
Nikko Precision 3 Jaw Chuck For Tsugami Lathe: (Inv.13178)
Nikko Precision 3 Jaw Chuck For Tsugami Lathe: 6.5 inch diameter power chuck with internal/external jaws. No Drawbar(LocV7ADD) Inv.13178) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to ... morea $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Craftsman 8” X-Y Slide Axis Rotary Table 4 Lathe Mill Drill EXCellent Condition
Coast to Coast Industrial C2Cindustrial.com rgnoll@comcast EST. 1998 Offered is a vintage Craftsman 8” X-Y Axis Rotary Table. Very clean. Without damage and in excellent condition. Cleaning out some excess tooling from the toolroom. It has sat on the shelf for quite some time collecting dust. So its time for it to go. Thank you in advance for your consideration& Bids on our offering. We are always striving to offer something aside from the standard fare for the needs/ interests of the Business and Private Folk. TERMS Notice* Bid Placement Indicates: You have agreed to the following terms: Packed shipping weigh of about 35lbs. Buyer pays shipping costs of $35 to Lower 48 US States. Includes insurance. Local pickup can be arranged. As well as delivery for a reasonable fee(up to 50mi) Pickup and deliveries can be scheduled Monday through ... moreFriday. Saturday pickups require scheduling. Notice* Our Business Hours: 9am- 6pm Monday thru Friday(some Saturdays) Notice* We are Not available on Sundays. Washington State Sales Tax is required and added to all Washington Sales. Unless a resale or manufactures certificate is provided. Payment is expected/ required within 3 days via Paypal& 5 days if via Postal Mail. We do not offer COD. Items are paid in full before shipping. Payments can be made thru Paypal. Shipping to a confirmed address may be required at our discretion. We also accept both business and personal checks as well as certified checks. Wired funding may be accommodated. We do Not take Credit Cards directly. Personal Checks Clear Before Shipping. As do Cashiers Checks(we verify authenticity) We welcome International buyers on many items. Please check with us prior to bidding. A Suggestion for Bidders/ Buyers with Email Filters. Spam Blockers, etc. If you are a bidder&or buyer of one of our items. It will be in your best interest to add our email address to your"Approved" list, otherwise you may not receive our emails. If you don't hear from us within 24hrs.it is most likely our emai
|
|
|
8" TOYO SEIKI" Precision CNC Lathe haas fadal Multi-Axis Indexing Rotary Table!
A" No Reserve" Auction with Very Low opening Bid for: 1- Toyo Seiki Rotary Indexing Table Very Nice Unit Photographs say the rest! Model: 8" Buyer will recieve exact unit shown in photographs Condition(As Shown) Excellent- Used- Working Buyer will recieve the unit shown in the photographs Package Weight(Approx) 135 lbs. SHIPPING: US Only) $95.00 International Shipping: $Inquire Click Here to view our other auctions! Powered by On Aug-18-12 at 13:28:42 PDT. Seller added the following information: Sellebrity Analytics.
|
|
|
Jacobs Spindle Nose metal lathe chuck model no 91-A6
Jacobs spindle nose lathe chuck model no. 91-A6 needs to be cleaned Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If ... moreyou change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. I only add insurance to orders over $100 which is already included in the shipping cost. If your item is under $100 and you want to insure it at your cost please contact me before payment is made. Florida Residents I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. Please give at least 10 business days before expecting delivery. Please do not ask me to mark items with a lower value or mark as a gift. US and international government r
|
|
|
Legacy CNC Router Model ARTY 36, 18”x36” Working Area, 4th Axis Rotary Lathe,
Like New Legacy CNC Router Model ARTY 36 New in 2012 Never Used In Production! 2.25HP Router 18”x36” Working Envelope 9” Z Axis Travels 4 th Axis Rotary Lathe Laptop Computer with Mach 3 Control Software ArtCAM Express Software Single Phase Power This machine has never been put into production. It has only been run on install for testing. The nature of the business changed and the owner no longer has need for the equipment. http:youtu.be/1aRCy4Jyaos
|
|
|
Atlas Craftsman Lathe Drill Milling Machine Cross Slide Compound Table Vise Jaws
Up for auction is a pair of vintage Atlas vise jaws including a of shop-made movable jaw. These fit the Atlas/Craftsman cross slide x/y table used on drill presses. The table top from that is also used as a boring table on Atlas/Craftsman lathes. So these can be used to hold work for boring on the table. Note that the Atlas/Craftsman cross slide x/y table or boring table is NOT INCLUDED! The block and bolts have good threads. The original nuts that clamp in the t-slots are there. There are some minor dings. Paint chips and spots of rust, but overall they are in very good shape. There are no cracks or repairs. The vise includes a shop-made movable jaw. Most of these are missing the original jaws. The Fine Print Note that any terms and conditions specified above. Such as local pickup only, supercede conditions in the"fine print" Bidding ... moreWhen you bid on an item. Your bid is your contract. You are bidding to own it. All questions should be asked prior to bid placement. Do not bid if you are not sure. Questions will be answered as soon as possible. Monday through Saturday. Questions during the work day will be answered at lunchtime or after work. My employer is not paying me to eBay. Do not assume anything. I will try my best to describe items. However I do not know everything about everything(just ask my wife) If there is something you want to know, ask. I will be more than happy to answer to the best of my ability. Confirmation and payment Winning bidder must confirm bid by email within three days after auctions close. Payment must be made within seven days of the Auctions close. Payment must be made by Paypal(hey. It sucks, but it's their rules, not mine) Unless the exact ACTUAL shipping costs are specified in advance. PLEASE DO NOT SEND PAYMENT UNTIL YOU RECEIVE EMAIL FROM ME INDICATING THE ACTUAL TOTAL. Do not assume that ebay's shipping calculator is correct. Shipping Your ship to address must match your Paypal address. If you do not have a confirmed address I will not accept Paypal payments. S
|
|
|
YUASA T SLOT X Y CROSS SLIDE TABLE EXC CONDITION - DRILL PRESS - MILL - LATHE
YUASA XY SLIDE TABLE WITH ROTATING TOP. TOP IS 7.5" X 7.5" WITH 5/8" T SLOTS. APPROXIMATELY 6" OF TRAVEL ON BOTH X AND Y AXIS. MOUNTING STUD ON BOTTOM IS REMOVABLE AND IS 5/8" OD AND 1.324" LONG. EXCELLENT CONDITION AND DOES NOT APPEAR TO HAVE HAD MUCH USE. CAN BE USED ON DRILL PRESSES. MILLS, OR LATHES. FREE SHIPPING TO LOWER 48.
|
|
|
5'' Index plate 33 - 31 - 29 - 27 - 23 - 21 South Bend lathe Mill indexer
5' indexer plate. 1 1/8' center hole. 1 5/8' 3 hole countersunk pattern. 3/16 thick.
|
|
|
5'' Index plate 49 - 47 - 43 - 41 - 39 - 37 South Bend lathe mill indexer
5' Index plate. 1-1/8' center hole. 1-5/8' 3 hole countersunk pattern. 3/16 thick.
|
|
|
Lathe Tailstock 8 inch center 7 "x 5 " clean CNC machinist tool maker #2 morse
Lathe Tailstock 8 inch center approx 7" x 5" base#2 morse taper all measurements are in photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f7a8d6bf7-0xf9-
|
|
|
MAg Instruments Model 2700 Lathe Turrett Air Assist Mill Turret Machinist Tool
Up for AUCTION is the following item 1- Mag Instruments Model 2700 Lathe Turrett Machinist Tool. In good working order unless otherwise noted. I'm currently listing over 100 Machinist Tools& Will be listing many others in the next couple weeks. Will Call is available on these items. Please Email me any questions you have I will answer you ASAP! Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13fb921d386-0xff-
|
|
|
Jacobs Rubber Flex Spindle Nose Lathe Chuck 91-T0, LO Taper Key Drive Mount
Jacobs Rubber Flex Spindle Nose Lathe Chuck 91-T0. LO Taper Key Drive Mount Jacobs Rubber-Flex Spindle Nose Lathe Chuck Model No. 91-T0 Capacity(with proper Collets) 1/16" 1-3/8" Collet Type: Jacobs Series 900 Rubber Flex Handwheel Diameter: 9" Spindle Mount: LO Taper Key Drive Overall Dimensions: 10" x 10" x 6" NOTE: No Collets are included with this Chuck
|
|
|
ALLENAIR CORP PNUEMATIC AIR ROTARY INDEXING TABLE 725-EC MACHINIST LATHE CNC
You are bidding on A NICE USED ALLENAIR MODEL 725-EC. PNUEMATIC INDEXING ROTARY TABLE. THE TABLE LOOKS TO BE ABOUT 8 1/2" ACROSS. BUT NOT FOR SURE. THE UNIT HAS BEEN TESTED AND WORKS GREAT. READY TO USE. MAY NEED A LIGHT CLEANING FROM AGE AND FROM NOT BEING USED IN A WHILE. PLEASE SEE ALL PICTURES AND BID AS YOU SEE FIT. I WILL BE LISTING A LARGE AMOUNT OF MACHINIST TOOLS FROM A NICE MACHINIST ESTATE OVER THE NEXT WEEK AND CAN COMBINE SHIPPING. IF YOU BUY MORE THAN ONE HAPPY BIDDING. Any questions. Please ask. Weight is 34 POUNDS SHIPPED. PLE ASE NOTE INTERNATIONAL FIRST RATE SHIPPING BELOW. I insure all items that the post office offers insurance in that country. I do not set the cost of shipping. So please don't give me bad marks because the shipping was too high. I do combine purchases to save on shipping. So please wait for my ... moreinvoice. I ship most items the day after payment is received-other than Sundays& holidays. The post office does not insure First Class International Mail. The post office no longer insures items to Great Britian. Ireland and some other countries. Please check with USPS.com to see if the post office insures to your country. For other countries, if you want your item insured, you have to select USPS International Priority Mail. Most international items have an extra charge added at customs. I can not change an item to gift or lower the cost. Insurance only covers the cost of the item on the custom's form. If you want to chance First Class with no insurance, please let me know before paying so I can add it as a shipping option. My shipping address is 609 Norway Street. Grayling, MI 49738. Please use USPS.com to calculate your shipping costs. Please use the eBay message system to contact us. I do not check PayPal. So please do not include notes when you pay. On Jun-01-13 at 16:00:00 PDT. Seller added the following information:
|
|
|
Lathe, rotary table, face plate, 15 inch
Item measures 7.070" on the back recess. Lathe. Rotary table, face plate, 15 inch
|
|
|
MACHINIST TOOL LATHE MILL ALFRED A TROYKE 9" ROTARY TABLE BH9
PRECISION MACHINIST TOOL ALFRED A TROYKE 9" ROTARY TABLE*PLEASE REFER TO ALL PICTURES TO SEE NICE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS PIECE CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP.
|
|
|
South Bend Lathe Rotary Milling Table 4-1/2" dia Excellent Machinist
Southbend 4-1/2" Rotary table for milling No marks in the surface- gear train runs smoothly This is excellent uncleaned. Undoctored condition- Good serviceable tool. it is missing its little plastic ball end on the locking lever- I will combine shipping on multiple purchase- and will invoice at end of auction.
|
|
|
BRIGEPORT RIGHT ANGLE BRACKET MILLING MACHINE LATHE ROTARY TABLE VERTICAL
BRIGEPORT RIGHT ANGLE BRACKET MILLING MACHINE LATHE ROTARY TABLE VERTICAL Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Right angle bracket. No name or markings on the unit but I believe it is for Bridgeport. In excellent shape original paint with few paint chips form moving and handling. Due to the spam blockers by various ISPs some of our emails get returned. If no emails are received from us or from Ebay at the end of auction. Please check your email settings and verify that you can receive emails and make sure that Your Ebay contact info. is current. Also our Ebay Contact info is current and can be optained by auction winner ... morethrough the Ebay web site. SHIPPING We try to ship in a day or two upon receipt of payment. Please email if item is not received within ten days after receipt of payment. 1)All items will be shipped with UPS ground unless otherwise indicated in item description. Our zip code is 90501. for. AFTER THE AUCTION An automated end of auction email will be sent that includes all relevant auction informations. Our information and a link to a form to be filled up by the winning bidder including method of payment chosen. Response to this email is requested to facilitate processing of sale. 9.75% California sales tax applies to all California residents and must be included with payment Payments Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Additional Information FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
MARVIN USA 6" INDEXING ROTARY TABLE ATLAS CRAFTSMAN LATHE MILLING MACHINE SHAPER
MARVIN USA 6" INDEXING ROTARY TABLE ATLAS CRAFTSMAN LATHE MILLING MACHINE SHAPER Brand Marvin Packaging None Condition Very Good Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1436871acbb-0xdf-
|
|
|
yukiwa 4th Axis Rotary Table 5-1/2" 5.5" (140mm) Chuck Metal Lathe CNC 7"W 12"L
yukiwa 4th Axis Rotary Table yukiwa 4th Axis Rotary Table 7" wide x 12" Long 5-1/2" 5.5" 140mm) Lathe CNC 1 x 19 prong plug 1 x 14 prong plug 1 x air hook up as shown From a working environment please see all photos double click photos above for larger image this Item Weighs 78Lbs Packed and will be send via UPS GROUND Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive all items are sent same day if bought and payed for before 12.00 noon Monday- Friday Before 10Am Sat if not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Thank You For Viewing
|
|
|
Jacobs Spindle Nose Lathe Chuck L0 Mount Model No.91-T0
Jacobs Spindle Nose Lathe Chuck L0 Mount Model No.91-T0 Made by The Jacobs Manufacturing Co. in USA L0 mount(4-1/2" X 6 thread) Uses Jacobs Rubber Flex Collets J910- J920 Used but in excellent condition Pictures are of the actual item
|
|
|
Vintage Atlas X/Y Milling & Drilling Table for drill press / lathe boring table
This is the Atlas X/Y table for use on a drill press. handles will be removed for secure.Fast priority mail shipping in a large flat rate box(domestic) This is not some cheap import x/y table; this is a quality piece of equipment that will allow you to position your work on the drill press to the thousanths of an inch. Works with any drill press that has slots in the table. Such as Atlas, Craftsman, South Bend, Delta, Clausing, Rockwell, Walker Turner or others. It is used and in very good condition. The height to the top of the flat surface is 4-3/4" These were made from Atlas lathe parts. So many of the parts are interchangeable with Atlas lathes. The table top is 7" square and has four t-slots. The table top can be used as a boring table on a 12" or 10" Atlas/ Craftsman lathe. The lower feed travels more than 3" ... moreWhile the upper one travels 4-1/2" that is the travel if you keep the entire slide in contact with the base- you can get more travel if you overhang) The base is 6"x7-1/4" and has 4 long slots for 3/8" bolts or mounting to your drill press table. Both screws are in excellent condition. The handles are in good shape. The graduations on both dials and on the base are in good condition but slightly rusty need careful cleaning. PLENTY OF PICURES. THANKS FOR LOOKING.CALL ME ON ANY QUESTIONS OR EMAIL,KEN 541-538-8219.
|
|
|
MACHINIST TOOLS PAIR OF ROTARY TABLE X Y HOLD DOWN CLAMPS 4 LATHE MILL GRINDING
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS PAIR OF ROTARY TABLE X Y HOLD DOWN CLAMPS USED WITH SIGNS OF WEAR ALL PARTS MOVABLE ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE& THICKNESS. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. ... moreI ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
ATLAS CRAFTSMAN 5 1/2" Dia. ROTARY TABLE LATHE MILL SHAPER DRILL PRESS MILLING
ATLAS CRAFTSMAN 5 1/2" Dia. ROTARY TABLE LATHE MILL SHAPER DRILL PRESS MILLING Brand Atlas Packaging None Condition Very Good Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
ATLAS CRAFTSMAN COMPOUND CROSS SLIDE TABLE JAWS LATHE MILL DRILL PRESS VISE
ATLAS CRAFTSMAN COMPOUND CROSS SLIDE TABLE JAWS LATHE MILL DRILL PRESS VISE Brand Atlas Packaging None Condition Good Quantity 1 Set I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
6 x 18 Craftsman Model 21200 Lathe,3 & 4 jaw,Milling Attachment,Tool Holders,etc
YOU ARE BUYING A LATE MODEL 21200 CRAFTSMAN 6 X 18 LATHE WITH 1/2 HP REVERSING SINGLE PHASE MOTOR.3& 4 JAW CHUCKS,DRILL CHUCK,2 DEAD CENTERS,MILLING ATTACHMENT,AMERICAN STYLE TOOL HOLDER AND PARTS MANUAL,EVERYTHING YOU SEE IN PICTURES. MOST OF THESE FLAT BED LATHES ARE USUALLY WORN OUT AND YOU CAN SEE THE WEAR MARKS EASILY, THIS ONE HAS NO WEAR MARKS. ALL IN VERY GOOD OPERATING CONDITION. ACTUAL weight 125 lbs, SHIPPING 140. Call Tina for shipping quotes at 727-362-8318, all other questions e mail gerry or call 727-547-0616 local inspections and pick-ups are welcome. LATHE IS BOLTED TO PLYWOOD,I WILL ENCLOSE IN PLYWOOD AND SHIP AT NO EXTRA CHARGE.
|
|
|
JVDW Straddle Cutting Tool for Brake Rotors, CNC Lathe
JWVD Brake Rotor STRADDLE CUTTING TOOL- These Straddle cutting units are made for turning brake rotors on a CNC Lathe. They fit Okuma Howa V3. V35, V40 Lathes but can be adapted to fit Doosan, Daewoo, Mori Seiki, and many other lathes. Thes e units are HYDRAULIC ACCUTATED. The cost today is $8500 each. Johan van de Weerd Company. Inc Please text with any questions. cell: 937-545-9932 International buyers to Pay actual freight cost.
|
|
|
cross slide table,base,W-68 series, craftsman,atlas,lathe,mill
Cross slide table and base for parts. Craftsman Atlas style. W-68 series. Table is W-68-2 with screws and gibbs, has 3 holes drilled in it. Base is W-68-5, has a dink in the ways(see pics with finger) needs to be removed for use. No cracks, welds, or brazing repairs on these. Only what is in the pics is availible. Normal 0 MicrosoftInternetExplorer4 General terms and conditions below. See detailed auction listing above for specifics which take priority over the general terms: Please check out my other listings for more stuff. You never know what it will be. Varies quite a bit. IMPORTANT: I am wiling to combine shipping on multiple auctions ending in the same week if it can reasonably be done on my end of it. BUT to get this you must follow these steps: 1. Wait to pay until all the auctions you are bidding on are over. 2. Please request an ... moreinvoice. Either through the listing or through eBay’s email system. 3. Pay the combined total of the invoice ONE TIME only. If you don’t request an invoice it becomes next to impossible to offer you. The valued customer, a combined shipping discount. I want to be able to save you as much $$$ as possible on shipping in this rough time we are living in BECAUSE I WANT AND VALUE YOUR BUSINESS. Additional note on shipping: Apparently it is the NEW GOUGE/RIPOFF. UPS is still charging a fuel surcharge. There is nothing I can do about that except try to work with you on alternative shipping: I will quote you a parcel post rate from the post office IF(and this is a big IF) it fits parcel post limitations of size and weight. And IF you are willing to wait the extra time in shipment for the lower cost. Please email me your shipping address for an accurate quote BEFORE the auction ends and before you bid on anything. Also. Sometimes the parcel post thing will work for combined shipping and sometimes it won’t. Depends. Additional additional note on shipping: ebay now charges 9% on the shipping costs also. I do not like this and you do not like it either. I have no choice but to mark up th
|
|
|
3 1/4 rotary table sherline Taig mini lathe mini mill watchmaker live steam
I bought from an auction sale with some tools. So this is your sunday project again. The gear has a 72 teeth and the table is not rotating, the foot print is 3 3/4 x 5 7/8 and higth is 2 1/2. gear teeth has no chips or dent. thanks( so here again. Always use eye protection and LOVE YOUR FINGERS! SORRY CAN NOT FIT IN A SMALL FLAT RATE BOX THE TABLE HAS A 3/4-16 THEARD FOR SHERLINE AND TAIG SPINDLE. THIS IS FOR PARTS OR FOR REPAIR" Garage made rotary table'
|
|
|
BRM 210 Series 4 Station Horizontal Electric Turret For Lathe
BRM 210 Series 4 Station Horizontal Electric Turret For Lathe SPECIFICATION Bullseye Catalog# 49972 Brand: BRM, Model: 210 Series, Removed From a Colchester CNC 500 Lathe, Unit Is In Good Working Condition, Weight: 177 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse ... moreby appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and
|
|
|
MACHINIST MILL Lathe Milling Drill Press Slot Cross Slide Table
MACHINIST MILL Lathe Milling Drill Press Slot Cross Slide Table 18" by 6" top table.all working ready to use very clean,
|
|
|
MACHINIST LATHE MILLING MACHINE DRILL PRESS COMPOUND TABLE & VISE ATLAS
MACHINIST COMPOUND TABLE& VISE BRAND UNKOWN. ME THINKS ITS AN ATLAS TABLE MEASURES 7 BY 7 INCHES. VISE 3 INCH JAW MISSING A SLIDE BAR THAT THAT WOULD TAKE UP THE SLACK ON THE SLIDE SEE LAST PHOTO I do not prize the word"cheap. It is not a badge of honor.it is a symbol of despair. Cheap prices make for cheap goods; cheap goods make for cheap men; and cheap men make for a cheap country. ~ William McKinley PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING ... moreINSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
ENCO steady rest for 12x36 lathe
Up for Auction is a Enco steady rest for the 12x36 lathe. it comes complete as shown and works well. I just simply dont use it.
|
|
|
4" Rotary table, tail stock and dividing plates,cnc,machining,lathe,mill
This is a very nice addition to your machining tools. I have a 4" vertical or horizontal rotary table. A tail stock. Dividing plate and holding kit. I used the table very few times. Never used the tail stock and dividing plate. The Tail stock is number 1811 from little machine shop The dividing plate is number 1812 from little machine shop The rotary table. Tail stock and diving plate runs for about $434 The holding kit is about $24 you can go to little machine shop.com to check prices. good luck.
|
|
|
PALMGREN ROTARY TABLE VISE JAWS CRAFTSMAN ATLAS ETC. FOR LATHE MILL WORK
PALMGREN ROTARY TABLE VISE JAWS CRAFTSMAN ATLAS ETC. FOR LATHE MILL WORK Brand Palmgren Packaging None Condition Excellent Quantity 1 Set I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-147872b228d-0x112-
|
|
|
Unimat style mini lathe 3" rotary table. Excellent
Up for bid is a 3" rotary table for your mini lathe. Excellent condition. Comes with two hold downs. 15.00 shipping to the lower 48 states
|
|
|
Lehmann Rotary Table Lathe Center EA-407.1B w/ Swiss Made Module PL 2943
Lehmann Rotary Table Lathe Center EA-407.1B w/ Swiss Made Module PL 2943 THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. MAY NOT BE AN ACTUAL LATHE CENTER. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: APPROX. PRODUCT DIMENSIONS: WIDTH: 27" LENGTH: 17" HEIGHT: 9" SHIPPING WEIGHT: 195 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS ... moreTO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY O
|
|
|
jewelers, model making dividing/indexing head, used with Myford ML7 lathe
Miniature precision index/dividing head model making or jewellery. Comes with 4 dividing wheels and 3 blank wheels to create your own. Shaft is tappered to accept a small chuck( size unknown but is about the size of a jacobs taper) one end and straight to take a face plate. Turns ratio 60;1. plate holes 32.34,38,45,49,77,91-29,31,37,41,42,43,46,47. I have c ut my own gears with it. I am selling my Myford ML7 lathe. So item is no longer required,
|
|
|
Jet NO 190 Persision Rotary Table for Mill machinist lathe gunsmith A8
See Photos for additional Details. Check out our other machinist Items! Thanks for Bidding.
|
|
|
MACHINIST LATHE TOOL 6 1/4" INDEXING ROTARY TABLE SMALL WATCHMAKERS JEWELERS
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 PRECISION MACHINIST TOOLS& PARTS 6 1/4" INDEXING ROTARY TABLE SMALL WATCHMAKERS JEWELERS TOOL MAKERS*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS PIECE CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. ... moreLOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148aa0684fb-0x108-
|
|
|
Adjustable Tail Stock Mill Lathe Machining Rotary Table Dividing Head LOOK
Adjustable Tail Stock Mill Lathe Machining Rotary Table Dividing Head Up for auction today is an adjustable tail stock. The tool is in good shape. Showing some wear from use/storage. There is no markings on it that I can see. It measures 6 x 4 ¼” across the bottom. And stands about 5” tall. Please see photos to determine condition and ask questions as needed. Winning bidder agrees to pay $13.50 for shipping and handling. Which includes tracking but not insurance. NEVER A RESERVE Please read information below before bidding. I thank you for viewing my item and good luck with your bid. My aim is to always fairly represent the item’s condition and what the item is. I will do this by providing a description and pictures to the best of my ability. The pictures are an important part of the description so please look carefully. If you have ... moreinformation about this item in contrary to what I stated please let me know and I will correct it. If I have one. I will state the history of the item as conveyed to me. Since all the items I sell were purchased used and may have had many owners, I will never know all the history as far as the environment they were kept in. The items I sell are vintage or older and normal wear is to be expected. And will often enhance its beauty and value. Communication and understanding is essential to ensure a mutually satisfying transaction. So please e-mail me for any clarification of description needed or more photos. All items are sold as is with no returns. Please be certain of what you are bidding on before you bid. Please look at my feedback and know you can bid with confidence. Payment is expected with PayPal within 5 days of auction close. If payment is not received within this period. You will forfeit the item to the backup bidder unless we make other arrangements. All items will be shipped within 3 business days of receipt of payment. Unless other arrangements are made(I sometimes need an out of town vacation) Shipping will be USPO or UPS. Shipping Rates include a nominal charge of $
|
|
|
Good Machinist Lathe Mill 10" Universal Rotary Milling Table Horizontal Vertical
Good Machinist Lathe Mill 10" Universal Rotary Milling Table Horizontal Vertical Selling With No Reserve! Hi! I have for Auction here a good 10" Rotary Milling Table. It has some surface rust but it is in good working condition. It weighs 82 lbs. See Pictures. Get yourself a great deal here. I will ship anywhere in the lower 48 states for free. Local pick-up is always welcome. But I require cash payment or there will be a $25 fee or 10% whichever is greater! I will combine shipping if you buy multiple items. But I can't send the combined invoice until Monday afternoon. Do not pay for the items before you recieve the combined invoice because I will not refund any money after items are paid. For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and ... moreHappy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash is required for pick-up items or a $25 fee.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items
|
|
|
Mead 12" Horizontal Vertical Rotory Machinist Table for Bridgeport Mill / Lathe
Great rotory table. awesome to have in the arsenal of tools. this one is hardly used. No Shipping. Come check it out and Make me an offer I cannot refuse. Let's Make a Deal! Local pick up only. Please ask any questions.
|
|
|
DIVIDING HEAD INDEXING HEAD DIVIDING ATTACHMENT EMCO UNIMATE LATHE 1260/48 AUST.
NO RESERVE! FLAT-RATE SHIPPING WITH TRACKING NUMBER AND INSURANCE TO THE LOWER 48-STATES; NO INTERNATIONAL BIDDERS! Please consider bidding on this great dividing head. Indexing head or dividing attachment, reference number 1260/48, made in Austria; probably for an Emco or Unimat lathe. The base of the tool measured 2.362 inches wide(60MM) by.835 wide(21MM) distance between bottom of base and center of thru hole is 1.417 inches(36MM) and the thru hole is.473 of an inch(12MM) The head’s condition is very good to excellent; looks like it was never used. PHOTOS DO A GOOD JOB OF SHOWING CONDITION. NO WARRANTY or GUARANTEE IS EXPRESSED OR IMPLIED; A RETURNS OPTION IS NOT OFFERED. WE BELIEVE OUR DESCRIPTIONS ALONG WITH THE IMAGES; PROVIDE OUR POTENTIAL CUSTOMERS WITH AN ACCURATE REPRESENTATION OF THE ITEM OFFERED FOR SALE. PAYMENT MUST BE RECEIVED ... moreWITHIN 5 DAYS OF AUCTION END.
|
|
|
9" 3-JAW LATHE CHUCK w/ CUSTOM MOUNT FOR BRIDGEPORT 12" ROTARY TABLE KH314 KEY
9" 3-JAW CHUCK w/ CUSTOM MOUNT FOR BRIDGEPORT 12" ROTARY TABLE KH314 w/KEY Mounting spud is 1" in Dia. X 0.91" tall Outside diameter of plate mount is 12" Plate thickness is 1/2" Has 4 machined notches to mount plate to rotary table Comes with key 2-1/2" Hole- Hole does NOT go through the plate This unit has been tested and fitted to a 12" BRIDGEPORT rotary table. We guarantee it fits. OWN A PIECE OF HISTORY! THIS ITEM WAS ORIGINALLY OWNED AND USED BY MASTER CRAFTSMAN CAL WILLIAMSON OF EL CAJON. CALIFORNIA. MR.WILLIAMSON WAS RESPONSIBLE FOR THE ORIGINAL SRAM BICYCLE GRIPSHIFT PROTOTYPE DESIGN THAT HAS BECOME THE STANDARD ON TODAYS BICYCLES. MR.WILLIAMSON CONTRIBUTED HIS EXPERTISE TO MANY EXCITING PROJECTS OVER THE YEARS INCLUDING FABRICATING ENGINES. BOATS, CARS, BICYCLES, AIR PLANES, AND MUCH MORE! ... moreIF YOU HAVE QUESTIONS ON THIS ITEM OR HAVE A SPECIFIC NEED FOR A MACHINE OR MACHINE TOOL ACCESSORY. PLEASE CALL US AT 858-754-8321. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b7e8b0605-0x115-
|
|
|
MACHINIST LATHE MILL NICE 8" Craftsman 3 Axis Rotary Table for Milling Machine
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. The wheels appear to have been painted. I think it is either Palmgren or Craftsman. Turns ok. May need some oiling. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will ... morecombine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
Palmgren Machinist 8" Rotary Mill Lathe Tilting Milling
You're bidding on this Palmgren Machinist Lathe Mill 8” Tilting Milling Machine. It looks like the Model number is 6284-1 or it could be 8284-1. I can’t really see it clearly. The top table does have some scarring(see pictures) I do not ship to Alaska. Hawaii, any US Protectorates, APO/FPO, PO Boxes or outside the United States. Shipping is an additional $45.00 Please add to purchase price. Ships ground. Payment is due upon close of bidding through PayPal. I try to list any/all flaws I am aware of when listing items. I do not make any guarantees on any items so please ask any questions PRIOR to bidding. Thank you
|
|
|
MACHINIST TOOLS LATHE MILL 15" Bridgeport Rotary Table for Milling Machine
SINCE THIS ITEM IS TOO LARGE. SHIPPING ARRANGEMENTS ARE TO BE MADE BY THE BUYER. THE LATHE CAN ALSO BE PICKED UP. PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, Some pitting but turns smoothly. Sold as is, no returns. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO ... moreNOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.BBBB
|
|
|
7" MILLING XY COMPOUND TABLE CRAFTSMAN ATLAS SOUTH BEND LOGAN LATHE FREE SHIP
This item is a X-Y milling drilling table in fine condition. 7"X7"The table is in excellent condition. The adjustment is smooth and there is no damage some surface rust. FREE SHIPPING!
|
|
|
Jacobs Spindle Nose Lathe Chuck Model 91-T1 AND 2 box of collets. Excellent cond
Excellent condition Jacobs spindle 91-T1 chuck and 2 boxes of collets size 1/16" to 1 3/8" Collets look like they have never been out of the boxes.
|
|
 |