|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: New Location: Lafayette, United States Model #: DBH0907V000001S. Mfg: DAIKIN. 2015 Federal Regional Standards for Heating and Cooling Products. COMPATIBLE HEAT KITS: EHB-7M15, EHB-7M30, EHB-7M45 ... more(NOT INCLUDED). IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
Buy It Now
Condition: New Location: Grapevine, United States YORK ZQG 7.5-Ton RTU. Brand new, includes economizer, disconnect switch, hail guards, convenience outlet, smoke detector, and programmable thermostat. ... moreSubmittals can be provided at the request of the potential Buyer. Unit is currently stored in Grapevine, TX and can be shipped across the continental U.S. Buyer to pay freight costs. Contact seller for freight quote.
Buy It Now
Condition: New Location: Lebanon, United States Model #: TPA090S4SN1Y. 7-1/2 TON SPLIT SYSTEM HEAT PUMP UNIT, 11 EER, 208/230-60-3, R410A. 7-1/2 TON SPLIT SYSTEM HEAT PUMP UNIT, EER:11, VOLTS:208/230, ... moreHERTZ:60, PHASE:3, REFRIGERANT:R410A, CFM:8300, CONNECTION SIZE:5/8" x 1-3/8", CONNECTION TYPE:SWEAT, OVERALL DIMS:48-3/4"H x 43-5/8"W x 60-1/8"D, WEIGHT:435LBS, ORIGIN:USA.
Buy It Now
Free Shipping Condition: Used Location: Little Rock, United States No matter what the application, Odyssey provides the solution. Coil Type: Plate Fin. Colored and numbered wiring and factory tested units make Odyssey ... morethe right choice. Collection: Odyssey™. Power Source: Electric.
Buy It Now
Free Shipping Condition: New Location: Little Rock, United States They must also be properly serviced maintained over the warranty's life, requiring a minimum of once-per year maintenance. Easy access handles provide ... morefast access to all normally serviced components.
Buy It Now
$161.54 Shipping Condition: Used Location: Glassboro, United States Lot# CS177 L2. Small orders are no problem. UPC: Does Not Apply. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Joseph Fazzio ... moreInc. MPN: IQ2500TXS. Weight: 53 lbs.
Buy It Now
Condition: New Location: Lebanon, United States 7-1/2 TON SPLIT SYSTEM HEAT PUMP UNIT, 11 EER 460/60/3 R-410A. 7-1/2 TON SPLIT SYSTEM HEAT PUMP, VOLT:460, HERTZ:60, PHASE:3, REFRIGERANT:R-410A, EER:11, ... moreCONNECTION SIZE:1-1/8" X 3/4" CONNECTION TYPE:SWEAT, TYPE:AIR SOURCE, DIMS:44-1/2"H X 31"W X 58"D, WEIGHT:415LBS, ORIGIN:USA.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: KGA092S4BS1M. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. Condition: Open Box. Most problems can be worked ... moreout if we just communicate. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
Buy It Now
Condition: Used Location: Tullahoma, United States Model: TSC060E4E0A18000000000000. Item was removed from a working facility. Sold as is. About CCR Industrial Sales.
Buy It Now
Condition: New Location: Lebanon, United States 7-1/2 TON SPLIT SYSTEM HEAT PUMP UNIT, 11 EER 460/60/3 R-410A. 7-1/2 TON SPLIT SYSTEM HEAT PUMP, VOLT:460, HERTZ:60, PHASE:3, REFRIGERANT:R-410A, EER:11, ... moreCONNECTION SIZE:1-1/8" X 3/4" CONNECTION TYPE:SWEAT, TYPE:AIR SOURCE, DIMS:44-1/2"H X 31"W X 58"D, WEIGHT:415LBS, ORIGIN:USA.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: RAS091L0AA0AAA. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING ... moreFREIGHT. Most problems can be worked out if we just communicate.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: ZGB060S4BM1G. Mfg: LENNOX. World’s Largest Distributor of Excess Air Conditioning. 2015 Federal Regional Standards for Heating and Cooling Products. ... moreIMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
Buy It Now
Condition: New – Open box Location: Lebanon, United States 7-1/2 TON SPLIT SYSTEM HEAT PUMP UNIT, 11 EER 208-230/60/3 R-410A. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ... moreITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
Buy It Now
Condition: New Location: Arlington Heights, United States Pricing does not include an economizer or curb adapter.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: ZCA060S4BN1G. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. MODEL NUMBER OF HEAT KIT:Z1EH0050AN1G(5 KW)/ Z1EH0075AN1G(7.5 ... moreKW)/ Z1EH0100AN1G(10 KW)/ Z1EH0150AN1G(15 KW)/ Z1EH0225AN1G(22.5 KW) NOT INCLUDED .
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: LCH036H4EN1G. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED ... moreAS GOING FREIGHT. Condition: Open Box.
Buy It Now
Condition: New – Open box Location: Fishers, United States Its compressor type is Scroll and its power source is gas.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: KCA048S4DN1G. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED ... moreAS GOING FREIGHT. Most problems can be worked out if we just communicate.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: LCH048H4EC1G. Mfg: LENNOX. Condition: Open Box. Most problems can be worked out if we just communicate. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM ... moreAND IS MARKED AS GOING FREIGHT. 2015 Federal Regional Standards for Heating and Cooling Products.
Buy It Now
Condition: New Location: Lebanon, United States Model #: LCH048H4EN1G. Mfg: LENNOX. Most problems can be worked out if we just communicate. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING ... moreFREIGHT. World’s Largest Distributor of Excess Air Conditioning.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: KCA036S4DN2Y. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. SIGNIFICANT DENT TO THE TOP OF UNIT, DENTS AND SCRATCHES ... moreALL AROUND UNIT HOLDING PRESSURE. Condition: Open Box.
Buy It Now
$201.78 Shipping Condition: New Location: Lebanon, United States SCL #: 35354. Mfg: RHEEM. 20 KW ELECTRIC HEAT KIT, VOLTS: 208/230, HERTZ:60, PHASE:3, FOR RHEEM RHGE/RHGF/RHGM/SHGM/ 7.5 TO 10 TON AIR HANDLERS, DIMS:24-1/2"H ... more21-1/2"W 25"D, WEIGHT:47 LBS, ORIGIN:USA.
Buy It Now
Condition: Used Location: Linden, United States 2009 7.5 TON PACKAGED ROOFTOP UNIT 208/230 V 3-PHASE COOLING WITH ELECTRIC HEAT. THIS UNIT IS A 2009 MODEL THAT STILL WORKS AND CAN BE INSTALLED RIGHT ... moreAWAY. LOCAL PICK UP ONLY OR SHIPPING ARRANGED BY THE BUYER.
Buy It Now
Condition: New Location: Fort Worth, United States Contact [phone removed by eBay] or [email removed by eBay].Model - DRG0904DL00001SHE 7.5T GE DD 130kComes with RTU curbs for installation and hail guards ... morefor condenser coil protection.Three units available
Buy It Now
Condition: Used Location: Paducah, United States
Buy It Now
Condition: Used Location: Daytona Beach, United States The unit’s compact footprint allows for easy installation where space is a concern. The 50PCH unit can be used in both traditional and geothermal applications ... moreand is also ideally suited for geothermal LEED® 1 certification driven projects.
Buy It Now
Condition: Used Location: Daytona Beach, United States HAVE SEVERAL MORE 480V UNITS RANGING FROM 3 AND 4 TON TO 7.5 AND 10 TON. USED 4 TON WATER COOLED 480V 3/PH HEAT PUMP. THE IS AN R22 UNIT.
Buy It Now
Condition: Used Location: Tyler, United States Electric Heat / max output KW: 7.5. This serves as a handshake that you picked up your item. We must have this to release the item. Last Inspection: 6/27/2022 ... more(Removed In Good Working Order). Weight (estimated): 1500 lbs.
Buy It Now
Condition: New Location: Arlington Heights, United States Pricing does not include an economizer or curb adapter.
Buy It Now
Condition: Used Location: Daytona Beach, United States HAVE SEVERAL MORE 480V UNITS RANGING FROM 3 AND 4 TON TO 7.5 AND 10 TON. USED 10 TON WATER COOLED 480V 3/PH HEAT PUMP.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: ZCA060S4BN1G. Mfg: LENNOX. 2015 Federal Regional Standards for Heating and Cooling Products. Condition: Open Box. Most problems can be worked ... moreout if we just communicate.
Buy It Now
Condition: New – Open box Location: Lebanon, United States Model #: ZCA060S4BN1G. 2015 Federal Regional Standards for Heating and Cooling Products. Condition: Open Box. Most problems can be worked out if we just ... morecommunicate. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
|
|
|
|
1950 Renault 5 & 7 Ton Truck Sales Brochure wg3062-9SIHR8
original non color folder. 9 x 6 folded, 18 x 6 unfolded, French text. This item is AutoLit Part#wg3062-9SIHR8. Original Automobile.Truck, and Motorcycle Literature, 1900 to Present. The world's largest selection of original automobile literature with over two million items in stock! phone: 315) 432-8282 fax: 315) 432-8256 Walter Miller 6710 Brooklawn Parkway Syracuse. New York 13211 USA phone: 315) 432-8282 fax: 315) 432-8256 PAYMENT INFORMATION: All items listed are factory originals and are in excellent condition unless otherwise specified. You may return anything for any reason within 10 days for a complete refund. SHIPPING& HANDLING CHARGES LIGHT ITEMS- U.S.A. ONLY: U.S.A. Only: For all types of"light items" sales literature. Owner's manuals, sales brochures, magazine ads, race programs, paint chips, photographs, ... moreetc. please add $4.95 per order for first class mail. This charge includes our careful packing, all packing materials and labor. PLEASE NOTE the $4.95 charge only applies to light items(as listed above) For heavier items, see below. Some auctions with smaller items are marked with less postage. For overnight delivery the cost is $19 for light items; contact us for heavier items. NOTE: If you had the winning bid on more than one auction and are sending in your payment for all of the items at once. Add $1 for each additional item. HEAVIER ITEMS- U.S.A. ONLY: U.S.A. Only: For all types of heavier items: All showroom albums. Books, shop manuals, parts books, larger sales catalogs, and other heavier items, add 6.95 per item for media mail. If ordering several heavy items at once, contact us and we will combine shipping and hopefully will be able to lower the price if possible. If items are extremely large, framed or bulky, contact us for a shipping quote. Assuming that correct payment has been made, most items will be shipped within one business day of receipt of payment. Personal checks must clear. FOREIGN AND CANADA SHIPPING: For foreign and Canada. The First Class International
|
|
|
Koehring All Terrain Crane 4x4 7.5 Ton Crane LRT110 Diesel 1990
1990 Koehring CRANE. WHEEL MOUNTED, HYDRAULIC. LIGHT, 7 1/2 TON(ROUGH TERRAIN CRANE) MODEL LRT 110 Cummins 4B 3.9 Diesel. 3-Way steering, Heated cab Just under 670 hours- Very clean unit in great running and operating condition.
|
|
|
CM Loadstar XL 7.5 Ton Electric Hoist 45' lift with Pendant controller & trolley
click to Enlarge click to Enlarge click to Enlarge You are viewing a CM Lodestar XL 7.5 Ton 15.000lbs Electric hoist with a trolley. This hoist is equipped with a 45' chain with a pendant control. In VERY GOOD condition so view all the pictures and bid with confidence. Internal: MF SE011613) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. Fair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or ... morecredit card over the phone) 4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKING#s I will email them to you and you can track using that number at or. Very rarely. Canada Post will LOSE or DAMAGE an item. I insure every shipment, but there is a process to getting the insurance money which can include direct contact and information from the receiver(which is you) I will definitely refu
|
|
|
Trane 7.5 Ton Split Heat Pump Condensing Units
Three Phase Power 208/230 Volts. Unit was replaced due to the High School Modernization. Unit is in good working condition.
|
|
|
Carrier Venstar 7.5 & 10.0 ton 3 phase units
2013 MFG date. Installed in 2013, removed in 2013 within 2 weeks of installation due to wrong units being installed, brand new condition with factory warranty, units were uncrated, fired off, then removed, bottom or side discharge for ducting, 7.5 ton gas pack 125K BTU 3 phase 208/230 VAC, 10.0 ton gas pack 180K BTU 3 phase 208/230 VAC, fully automated, low ambient, economizer fresh air, outdoor sensor, smoke detectors, S/A& R/A temp sensors, R410A refrigerant, $6,500.00 each or $12,000 for the pair. Free delivery within the state of Missouri. Can offer the following forms of payment: cash, credit card, or 0% for 12 months/interest applied longer term financing.
|
|
|
Taber 5 Ton Kenco Kompac Punch Press 5K-7-100
Taber 5 Ton Kenco Kompac Punch Press 5K-7-100 Serial 70-270 Weight: 269 lbs(ADM141 W1 Vidmar L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge ... moreto the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-318
|
|
|
ENERPAC RC-57 5 TON 10&7/8" LONG HYDRAULIC RAM CYLINDER NICE!!
ENERPAC RC-57 5 TON 10&7/8" LONG HYDRAULIC RAM CYLINDER This is in good used condition! Te sted and opened. Comes from a re tired electrician. NO ENGRAVINGS! FREE SHIPPING WITH BUY IT NOW! Please keep a eye on my auctions as I have just purchased a large amount of machinist tools and mechanic tools. I will be listing vintage collectible and like new tools along and other misc good items. PLEASE CHECK OUT MY OTHER AUCTIONS! $14.99 shipping and handling for the 48 continental states only. Payment to be made within SEVEN DAYS of auction closing. I COMBINE SHIPPING TO SAVE YOU MONEY!
|
|
|
R&M Spacemaster Overhead Hoist, 7.5 TON Hoist 10HP Overhead Crane
Used R&M SpaceMaster Overhead Hoist. 7.5 TON Hoist 10HP Overhead Crane This unit was pulled from a local Federal Dam maintenance building where it was no longer required. Model#SD-75-70. Serial# 1752279601, 3 Phase. Buyer responsible for all shipping costs. I will be placed and mounted on a Heavy Duty Pallet for $150 of fully crate for $275.00
|
|
|
Knuckleboom Crane Tico 1585HT With Winch 7.5 Ton Knuckle Boom Hoist Lift
LOW RESERVE* Tico 1585HT Knucklboom Crane With Winch. Boom Picks 15.210 Lbs. at 6'7" This is a very nice crane, it is tight and operates well. Auction is for the crane, as pictured, and the mounting brackets? The truck is not included. The flat bed is not included. Model year/ date of manufacture unknown. I noticed on the manufacturer's serial number plate attached to the boom that 1585 HT is listed as the Type, not the Model Number. I have described this unit as I see it. But recommend you come and make your own inspection prior to bidding, as all sales are final. This property is sold as is, where is, without guarantee or warranty, expressed or implied. Please call Randy at(304) 227-4600 with any questions you may have or to set up an appointment for inspection. This item is available for local pick up only. Transportation/ ... moreshipping will be the purchaser's responsibility. We will have a crane available to help you load the item(s) purchased, free of charge. A storage fee of $10.00 per day will be charged if item(s) has not been removed within 60 days of auction close. We require a deposit in the amount of $500 within 48 hours of purchase/auction close via Paypal. Wire Transfer, Money Order, Cashier's Check or Cash and the balance in full within 5 days of purchase/ auction close via Paypal, Wire Transfer, Money Order, Cashier's Check or Cash. We reserve the right to end this auction at any time. Please don't bid if you can't follow through with your purchase. We will collect WV Sales Tax(6% unless purchaser is exempt. Item belongs to our dealership. Henderson Truck& Equipment, Inc. and will be sold F.O.B. Haman,WV. Thank You!
|
|
|
Pettibone 15B1W 7.5 Ton 4x4x4 Rough Terrain Crane Outriggers Detroit Diesel RT
SKU: 639890 A: 0015000000TLI7F O: 0065000000MkADz PA: or View Photo Gallery. Request Freight Estimate. View Financing Options. Equipment Appraisal. Location: Tenino. WA 98589 Item Description. This is a no reserve auction for a 1976 Pettibone 15B1W Rough Terrain Crane in good op erating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. ... moreContainerizing and port-access available for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Pettibone Model: 15B1W Year: 1976 Hours: 997 showing on working meter- consignor reports hours are original Serial Number: B-581 Operating Weight: approx. 28.500 lbs Transport Dimensions: 332"L) x 96"W) x 115"H) Features: Current OSHA Exam Certificate Was Done on 4/10/2013 7.5 Ton Sheave Hook Block(4) Hydraulic Outriggers 4 wheel drive and 4 wheel steer Fully Enclosed Cab Rear Steer Specifications: Engine Make: Detroit Model: 453 Fuel: Diesel Transmission Speeds: 3F/3R Boom Max Capacity: 15.000 lbs Boom Length: 26' 10" Tire Size: 14.00-24 Inspection Report Overview Comments Overall Appearance Very good see photos Overall Operating Condition Good see video Engine Starter Operational Exhaust System Very good see photos and video Cooling System No problems or leaks noted at time of inspection Fuel System No problems or leaks noted Oil Leaks No leaks noted at time of inspection Fan/ Belts Good for age and hours Comments Engine started very easily and ran very well during function check Drivetrain Transmission Good Comme
|
|
|
7.5 Ton HVAC Units
Roof top units that are in excellent working condition building is being torn down. These units all work and vary in age. But the building was only 10 years old. Don't miss out on this golden opportunity. You are bidding for only one unit, I have a total of 6 units.
|
|
|
ORD 7 SNL G-744 Military Cargo 5 Ton 6x6 M41 & Dump Truck 5 Ton 6x6 M51
This is an unused copy. No marks. Highlighting, or other signs of use. If you have any questions please ask. Original publication. September 1951 85 Pages Check out my other items! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e69057b0a-0x101-
|
|
|
STRONG SCOTT 1 TON RIBBON MIXER 70 CU/FT 40" X 8' WITH 7.5 HP MOTOR & LOAD CELLS
Fully Refurbished STRONG SCOTT 1 TON RIBBON MIXER 70 CU/FT 40" X 8' WITH 7.5 HP MOTOR AND FALK GEAR REDUCER AND LOAD CELLS If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model has bee n st ored ins ide, and is ready to ship to y ou. Please ask about international shipp ing. This model includes a double ri bbon. And is rated at 1 TON. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? We use only the finest materials and parts in our ... moreequipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS
aims BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Benchmaster Manufacturing Co. of Los Angeles. CA. This is a used OBI Punch Press in working condition. Serial# 45125212 Specifications: Capacity: 7.5 Tons. Throat: 4" Shut Height(approx. 8" Die Bed: 11" x 8" Back Opening: 6" Motor: 1 Horsepower. 220/ 440 Volt, 3.5/ 1.75 Amps. Electrical: 220/ 440 Volt. Three Phase. Overall Dimensions: 20" x 28" x 62" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting ... moreour page for more Great Deals! Bidding starts at a dollar with no reserve. BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS BENCHMASTER 7.5-TON HEAVY DUTY OBI PUNCH PRESS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Minster #7 Gap Frame Press - 5" Stroke - 75 Ton
Item Information Item Name: Minster#7 Gap Frame Press- 5" Stroke- 75 Ton Item# 10227 Price/Each: $44.500.00 Year: 1993 Brand Name: Minster Model: 7 Serial# 27903 Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description MINSTER#7 GAP FRAME PRESS MODEL: 7 YEAR: 1993 75 TON Minster#7 Specifications Serial# 27903 Tonnage 75 Year 1993 Bolster Area 36" X 24' Speed 45 SPM Stroke 5" Slide Adjustment 3.5" Shutheight to Bolster 17" Shutheight to Bed 20.5 SDAU Press weight ARO 16.000 LBS Equipped with: Recirculation Lube System Air Clutch As is. Where is Terms: 50% with order. 50% prior to ship CALL OR EMAIL FOR ADDITIONAL PHOTOS OR INFO Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment ... moreDetails: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we
|
|
|
NICE!! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS - #18-E STYLUS
aims NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Di Acro- Houdaille of Lake City. Minnesota. This is a 18-Station Turret Punch Press in GREAT condition. Model# 18-E Stylus Serial# 0660875150 Specifications: Number of Stations: 18. Maximum Material Capacity: 1/8" Punching Capacity: 2" in 16-gauge mild steel. Throat Depth: 19" Punching Speed: Up to 140 holes per ... moreminute. Crankshaft Speed: 245 strokes per minute. Overall Table Size: 60" x 36" Carriage Travel: 19" x 24" Work Piece Size: 19" x 24" Punch Motor: 1/2 Horsepower. 115/230 Volt, 1,725 rpm, 9/4.5 Amp, 60 Hz, Single Phase. Turret Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 4.4 Amp, 60 Hz, Single Phase. Overall Dimensions: 62" x 66" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH P
|
|
|
CROSBY 1018525 CROSBY SHACKLE 7/8"" SCREW PIN ANCHOR SHACKLE 6.5 TON LOT OF 2
CROSBY 1018525 CROSBY SHACKLE 7/8" SCREW PIN ANCHOR SHACKLE 6.5 TON LOT OF 2 Click Images to Enlarge Item Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 CROSBY 6.5 TON SHACKLES Model: 1018525 QTY: 2 7/8" 6.5 ton WLL. Quick-Chek, Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored This item appears to be in good used condition. Refer to pictures for details. Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Check out our Other Crosby Products! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements ... moreand configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We list new item daily so check back often We Appreciate Your Business! Shipping&
|
|
|
CM Columbus MCkinnon Shackle 8 1/2 Ton 8.5 Anchor Rigging 7/8"
Hello You are bidding on a CM Columbus MCKinnon 8.5. 8 1/2 TON Shackle. 7/8" Diameter. Screw Pin Anchor Type. Item is Used but in excellent Operating Condition. Fast Shipping Happy Bidding. Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e91e76fde-0xfa-
|
|
|
Crane Tractor Drive by SATURN ENGINEERING 7.5 Ton 55 FPM 3ph 460 Volt
This is a used but in good working condition Saturn Engineering drive tractor. It has a 15.000lb weight capacity, moves at 55 Feet Per Minute, is 3 phase 460 volt 60 hz. It was made in 1997 It does not have the hoist with it. It has a remote control wired in with'UP' DOWN' buttons. But I'm not sure if it's meant to control the hoist or move the trolley. The inside lid of the electronics box has burn marks from a previous bad transformer. But it has been replaced and repaired. I'll give discounts if anyone is interested in more than one unit. I'm also open to trades. I also have the following for sale; 2 additional- 15000lb 55fpm 3phase Saturn Engineering tractor made in 1997& 1995 1- 6000lb 35fpm 3phase Saturn Engineering tractor made in 1995 3- 4000lb 35fpm 3phase Saturn Engineering tractor made in 1997. 1994, ... more1994. One has a wired remote. 1- 4000lb 70fpm 3phase Saturn Engineering tractor made in 2000.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ebbfc50ae-0xff-
|
|
|
CARRIER AC UNIT MODEL # 50BRN0086 -- 7.5 TON - USED
CARRIER AC UNIT MODEL# 50BRN0086 7.5 TON USED S/N- 1196B32314 MFG- 8/3/96 WE BOUGHT THIS AT AN AUCTION. NOT TESTED. AS SHOWN IN PHOTO(S) LOC- 1161. Posted with
|
|
|
Ackon 327 - 3 Jaw 5 Ton Capacity Bearing & Gear Puller 5.5" max reach, 7" Spread
Ackon 327. 5 ton puller! This is the only one of the lot that isn't sealed in plastic, see the photos, and ask questions as needed! No reserve! Thank you for looking! I strive to keep all of my customers happy and satisfied. I will combine shipping where possible. And will work out any issues as necessary. Please email me with any concerns or questions! Most of my items are auction box lot purchases, the items I was not bidding to win! This is how I offer them cheap and continue to do so! All items are described and photographed to the best of my ability and knowledge! Please Note: Although I do not advertise a return policy. I will work with any buyer who is not satisfied with their purchase. Refunds have been issued and returns have been arranged! Simply communicating with me starts the action! I leave positive feedback after it has ... morebeen received from a happy buyer! Thanks again and happy bidding!
|
|
|
7.5 Ton 6" Strk Auto-Sert AS-7.5 HARDWARE INSERTION PRESS, Misc. Tooling, J-Bar
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 7.5 Ton 6" Strk Auto-Sert AS-7.5 HARDWARE INSERTION PRESS. Misc. Tooling, J-Bar Ref# 150658 iammdna XPEMSR AUTOSERT 7.5 TON HYDRAULIC INSERTION PRESS MODEL AS-7.5(X-7) S/N 00238 TONNAGE. 7.5 THROAT ... moreDEPTH. 20 RAM STROKE. 6 HYDRAULIC PRESSURE. 250-3.000 PSI RESERVOIS CAPACITY. 12 Gallons DIMENSIONS. 76 H X 36 W X 45 D WEIGHT. 1.900 Lbs Equipped With: SAFETY SYSTEM MONITORED BY A GE FANUC MICRO-CONTROLLER- TWO DIGITAL COUNTERS(PARTS AND FESTENERS) BOWL FEEDER- FOOT PEDAL- J-BAR. EXTRA ANVILS AND A NICE ASSORTMENT OF VARIOUS TOOLING- OPERATOR'S MANUAL Machine Location: HARRISON. NJ Click Here For More Auto-Sert Machines Click Here For More Fabricating Machine- HARDWARE INSERTION PRESSES FOR SHEETMETAL(s) Click Here For More Presses& Pressroom- HARDWARE INSERTION PRESSES FOR SHEETMETAL(s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machiner
|
|
|
1989 Koehring All Terrain Crane Truck 7.5 Ton Crane No Reserve
Koehring All Terrain Crane Truck. 7.5 Ton AT Crane with 40' Stick. Cummins diesel engine only 300 hours on engine. Legal Disclaimer This item is being sold"AS IS. AS SEEN" without recourse. All repairs and inspections are the responsibility of the buyer. No representation, promise or warranty, expressed or implied, has been made regarding the vehicle's condition, merchantability, suitability or fitness for a particular purpose. All sales are final. Read this before you bid! Bidders with negative or zero rated feedback must get bid approval first or your bids will be removed from all my auctions. A nonrefundable deposit of $1000.00 is due within 48 hours to secure vehicle. Balance due within 7 days of auction close. Seller reserves the right to end the auction early without any liability to the seller. All bidders must be ... moreable to pay for the vehicle. Financing must be secured prior to bidding. Payment must be made by cash in person. Certified check. Buyer is responsible for all shipping costs. Remember that your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. The time to decide if you want vehicle is BEFORE you place your bid. We are located only 120 miles north of Boston, and 240 miles south of Montreal in tax free New Hampshire. On Apr-19-11 at 16:38:53 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES: On Jan-16-12 at 07:23:08 PST. Seller added the following information: On Jan-16-12 at 07:34:39 PST. Seller added the following information:
|
|
|
Item: York 7.5 Ton Heat Pump Packaged Unit 2 of 2 - ZH090N1N0N4AAA4B
Item: York 7.5 Ton Heat Pump Packaged Unit 2 of 2 Model# ZH090N1N0N4AAA4B Serial# N0M9404318 Year: 2008 Type: 13 Seer Price: $2.100.00(Or Best Offer) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In our picture. The bottom two units are our 7.5 ton units.
|
|
|
2012 Conair 7.5 ton ( 8 ton) Air Cooled Chiller, 230 volt, Perfect, 0 Hours!
2012 Conair 7.5 ton( 8 ton) Air Cooled Chiller. 230 volt, Perfect, 0 Hours! KIG. Inc. buys and sells and refurbishes industrial chillers. Let us know what you need, or what you have for sale. search for us on the web at"kigsales" Save over new with this 1 year old never used 8 ton chiller. 230 volt. Has pump and tank. Call 978-514-3800 or email info at kigsales dot com for more information. Thanks for your consideration! supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasicFree.swf.
|
|
|
7.5 Ton Condensor, 208V, 3phase
Heil Model#CA5090VHA2 Split unit BTUh are dependent on indoor unit and may be lower as such. R-22 Refrigerant We are an Electrical/Mechanical Contracting Company. And the unit was in good condition when taken out of service and replaced for a customer. It has been inside of our shop since.
|
|
|
Coffing Model # A-7 3/4 +1-1/2 Ton chain Hoist/Winch 5' Chain single line
this is a Coffing 3/4 or 1 1/2 ton hoist. these hoist are some of the best hand winches made at any price and they are made rite here in America. this unit works great. look closely at the photos and judge the condition for yourself. ask questions if you have them and please check out our other items we have some great deals this week.
|
|
|
CM Masterlink 1" 10 Ton 7" X 3.5" I.D.
Used CM Oblong Masterlink Marked"Herc-Alloy HA100" 20.800 LBS Working Load Proof Tested Grade 80.
|
|
|
LITTLE GIANT 7.5 TON 15,000 LBS TRUCK CRANE CUMMINS DIESEL GRAPPLE
LITTLE GIANT CRANE MODEL 7.5MT 2327 HOURS CUMMINS DIESEL ENGINE 7.5 METRIC TONS 15.000 LBS LIFT CRANE RUNS AND WORKS GREAT ALL ITEMS ARE LOCATED AT OUR BUSSINESS LOCATION 307 CROFT RD PEMBROKE VA 24136. DUE TO RECENT PROBLEMS WE NO LONGER ACCEPT PAYPAL AS A FORM OF PAYMENT PLEASE CONTACT JOSH AT 540-320-8606 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE WE DO REQUEST CASHIERS CHECK OR WIRE TRANSFER FOR ANY TRANSACTIONS OVER 1500 DOLLARS, ALL CREDIT CARDS WILL BE CHARGED A ADDITIONAL 3% FEE THANKS
|
|
|
CROSBY HOIST HOOK SWIVEL 7.5 TON (FREE SHIPPING)
CROSBY HOIST HOOK SWIVEL 7.5 TON USED. LOOKS NEW! AS IS. NO WARRANTY Normal 0 false false false EN-US X-NONE X-NONE Item is available FOR FREE SHIPPING. Contact Number: 915-408-9904 Or Via EMAIL: www.montacargas@sbcglobal.net Email2: ocabral4@gmail.com Texas buyers pay 8.25% Sales Tax. Unless Texas Resale certificate is provided prior to purchase.
|
|
|
WHITNEY 5-TON PORTABLE MANUAL PUNCH - #7
aims WHITNEY 5-TON PORTABLE MANUAL PUNCH- 7 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Whitney Metal Tool Co. This is a Portable Manual Punch in good condition. Model# 7 Features: Medium Duty Portable Punch is for medium punching power(up to 5 tons) Highly portable and of a size that will fit any tool chest or truck locker. The leverage design of these tools assures easy linear operation. Will punch and strip inside a 90 deg arc movement of the lever. And. The upper handle will not disengage when moved to either extreme. Specifications: Maximum Capacity: 5 Tons. Throat Depth: 1-5/8" Overall Length: 18" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection ... moreof products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WHITNEY 5-TON PORTABLE MANUAL PUNCH- 7 Reliable Tool Inc. c 2011 | Powered by
|
|
|
Vtg. Grove Model 36 Industrial Yard 6-7.5 Ton Crane Brochure - NICE
Vtg. Grove Model 36 Industrial Yard 6-7.5 Ton Crane Brochure- NICE This listing is for one 5 page brochure full of lift charts. Working diagram, features, photos and specifications. Catalog# 559474-10m. I accept Paypal as the only form of payment. Please make payment within 7 days of winning the bid or the item will be relisted and ebay will be notified of non-payment. Thank you! I use United States Postal Service Priority Mail. I will occasionally use other methods in special circumstances; such as a small item that will fit into an envelope. I ship within the Continental US primarily; If you are outside of that area and interested in one of my items please contact me and I will let you know the specifics on shipping to you. I care very much about having happy customers. I will post all information on the items I list in an honest and ethical ... moreway. Seeing as how there is such a broad range of items I list I cannot possibly have expertise in all areas; so please check the photos. Read the details and if there is anything you have a question or comment on PLEASE contact me before bidding. I am learning as I am going and love receiving input. If there is an error in my listing- if I have misrepresented the item- I will gladly accept returns.
|
|
|
DUFF-NORTON MODEL 514-MT 5 TON RATCHET JACK 7-1/2" RAISE 14" CLOSED
DUFF-NORTON MODEL 514-MT 5 TON RATCHET JACK 7-1/2" RAISE 14" CLOSED YOU ARE BIDDING ON THIS ALL ORGINAL DUFF NORTON 514-MT 5 TONS RACHITING JACK. IT IS IN GREAT SHAPE& READY TO GO. IT HAS NO BREAKS CRACK OR REPAIRS. IT WORKS AS IT SHOULD IT RACHETS UP& DOWN NO SUDDEN DROPS. IT RACHETS UP TO 20 INCHES TALL ON THE TOP SUPPORT& 9 INCHES ON THE LOWER SUPPORT IT IS 14 1/2 INCHES TALL WHEN ALL THE WAY DOWN. SEE PICTURES FOR DETAIL. Paypal or Pay at pickup other pay options contact me. Payment must be made withen 3 days of auctions end.Thankyou I ship Prioirty mail on glass& pottery parcel post on everything else.insurance is INCLUDED IN THE SHIPPING ON ALL POTTERY& GLASS& FRAGIL ITEMS. International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These ... morecharges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Other information a seller may wish to include: These charges are normally collected by the delivering freight(shipping) company or when you pick the item up? do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Shipping fees are the responsibility of the buyer I DO COMBINE SHIPPING ON MULPITAL ITEMS shipping is based on location and item weight when boxed.All pottery& glass items are shipped priority mail I use parcel post& ups on the rest.UPS IS USED ONLY WHEN IT IS TO BIG FOR USPS I SHIP FREIGHT THRU YELLOW TRUCKING TERMINIAL TO TERMINIAL.I RESERVE THE RIGHT TO CHANGE SHIPPING PROVIDERS ALL international sales are for the EXACT selling price, no exceptions, to do otherwise violates the laws of the United States and your country! PLEASE REVIEW ALL PHOTOGRAPHS FOR ADDITIONAL INFORMATION* THEY ARE SUPPLIED TO PROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBA
|
|
|
Screw Pin Lifting Shackle 7/8" - 6.5 Ton - HIGH QUALITY Anchor Rigging Crane
Up for auction is 1.GENTLY USED 7/8- 6 1/2 TON SHACKLE. This shackle is very lightly used but in excellent working condition. Measures aprox 5" from top to bottom. I accept paypal only. I ship to the lower 48 states only. I'm starting this with a low start price with no reserve. Check my feedback and bid with confidence. GOOD LUCK BIDDING THANKS NORM Posted with
|
|
|
ENERPAC RRH-1508 150 TON 8" STROKE HOLLOW DOUBLE ACTING CYLINDER NICE UNIT 7/3 5
ENERPAC RRH-1508 150 TON 8" STROKE HOLLOW DOUBLE ACTING CYLINDER NICE UNIT 7/3 5 ENERPAC RRH-1508 150 TON 8" STROKE HOLLOW DOUBLE ACTING CYLINDER WORKS GREAT THIS CYLINDER SELLS FOR OVER $6200 NEW. IT IS IN GREAT WORKING CONDITION. HAS SEEN VERY LITTLE USE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE ... moreCONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
Vintage 1925 ad for Federal Trucks - Big 5 & 7 ton models w/Performance & Speed
This listing is for a vintage magazine advertising page featuring Federal Trucks. This large(14 inch by 10 inch) magazine ad is from the Saturday Evening Post. Dated August 8, 1925. Nice graphics of a Federal Motor Truck! This magazine ad page is in Fine condition. See large photo for the page. Buyer to pay $2.50 for 1st class postage or $6.00 for Priority Mail shipping. Save on postage by bidding on the other advertising pages that we are listing on eBay this week. I combine items to save on shipping cost. Each additional page would only cost 25¢ to ship! Check out my! This vintage magazine ad is fresh from an estate in Maine. There were over 1.000 pages in this collection and we will be listing all of them in the coming months. Keep checking back to see what new advertising pages we have listed.
|
|
|
Screw Pin Lifting Shackle 7/8" - 6.5 Ton - Rigging Crane Tow truck Flatbed
Up for auction is 1. 7/8- 6 1/2 TON SHACKLE. This shackle looks to be new and in excellent working condition. Measures aprox 5" from top to bottom. I accept paypal only. I ship to the lower 48 states only. I'm starting this with a low start price with no reserve. Check my feedback and bid with confidence. GOOD LUCK BIDDING THANKS NORM Posted with
|
|
|
7.5 Ton Koolant Kooler Chiller and Heat Exchanger, HCV-7500, XCV-10000
Koolant Koolers Model HCV-7500-4PR-3CLX Chiller Serial No. 8907 7-1/2 Ton 7-1/2 HP 460/3/60 Koolant Koolers Model XCV-10.000-4PP-5CL Heat Exchanger Serial No. 9669 Loading Charge: FREE These items are being sold as-is. As taken from service. There are no warranties or guarantees either expressed or implied. Posted with
|
|
|
Matchbox Lesney No. 3b BEDFORD TIPPER 7.5 TON Gray/Maroon Dump
The Bedford Tipper. A 7.5(7 1/2) Ton Tipper, No. 3 Made in England by Lesney, a Matchbox dump truck/ service vehicle/ toy for your collection, diorama, model railroad layout, vignette/gift for your office buddy. Vintage, 1960s. Gray cab with maroon dump, the dump lifts freely and the gate opens and closes with ease, black plastic tires, I think the wheels are black plastic.the tire descriptions and variations are mind-boggling to me, please look at the photos(I posted 12) to allow you to make your own determination of tires and condition of item. This vehicle does have a few paint nicks and/or scratches or marks from bumping other Matchbox toys I stored it with, but it is in sturdy condition with general play wear and signs of improper storage. I do not have the box for this trailer. I am not an expert on these toys, nor a collector per se, ... morejust selling what's left of my childhood collection(more to post soon) as we prepare to move to smaller quarters. I will gladly combine items for reduced shipping.
|
|
|
Campbell 6.5 ton 7/8 clevis shackle screw pin hoist rigging lifting galvanized
Nice pair of 7/8 inch Campbell 6.5 ton shackles made in the USA. Galvanized and hardly used.
|
|
|
Harrington, Budgit, Jet, Electric chain hoists, 1ton - 5 ton, lot of 7
I have a lot consisting of 7 used chain hoists ranging from 1 ton to a 5 ton unit. 1- 1 ton JET unit 2- 2 ton Budgit units 3- 3 ton Budgit units 1-5 ton Harrington unit. The 1 ton- 3 ton units all have trollies. I do not have a trolly for the 5 ton Harrington. These units all came out of a working environment. I have not tested any as to their being operational. I am selling them as a package to save time and money. Some parts may either be missing or not connected.Like chain cans. This would be a great deal for someone who would like to sell them individually. If I took the time to test and clean all of these before the sale they would demand far more than my reserve price. I would prefer them be picked up here locally. But for an additional charge of $150.00 I will palletize and drop off at the nearest RL Carriers for purchaser. The rest ... moreof the freight from there to where you want them shipped will be between you and the carrier. Your arrangements will have to be made with carrier prior to my dropping them off. I will have to be paid in full also. This includes the additional $150.00. You are buying them AS- IS absolutely no returns accepted on these items. Buyer must provide a $300.00 deposit within 48 hrs. of winning this lot. Balance to be paid within 7 days. All funds must clear my bank before any pick up or shipping arrangements are to be made.
|
|
|
7.5 ton-Trane Packaged Cooling Unit with Electric Heat- 2006
14.00 Trane Chiller- Packaged Cooling w/ Heat rooftop unit Model: TSC092A Serial: 652100008L Tons: 7.5 Year: 2006 Volts: 460/3/60 Designed For Refrigerant: R-22 Type: Air Cooled Electric Heat Normal 0 false false false EN-US X-NONE X-NONE Price is loaded on buyer's truck. Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE All Equipment sold as is and where is. No warranties implied or expressed. No pumps available with the unit advertised.
|
|
|
TRANE VAL-2969 WW51X0180 EXPANSION VALVE 7.5 TON 1/2" FLARE TXV new
DESCRIPTION NEW USE THE ZOOM FEATURE TO FURTHER INSPECT THE ITEMS IN THE PICTURES WE STRIVE TO BE 5-STAR SELLERS. IF THERE ARE ANY PROBLEMS WITH YOUR ORDER PLEASE LET US KNOW IMMEDIATELY SO WE CAN MAKE THINGS RIGHT AND EARN YOUR 5-STAR FEEDBACK RATING. RETURN POLICY RETURNS ACCEPTED WITHIN 30 DAYS OF RECEIVING ITEM IF: The item(s) must be in its original condition. And also must be the same exact items with the same serial numbers as shipped to you. We use serial numbers and/or security markings to help prevent fraudulent returns. Any item(s) marked AS-IS. PARTS/REPAIR, or NO RETURN are not elgible for refunds. Please contact us for return authorization and address PAYMENT Payment expected within 7 days of purchasing item(s) Please try to make payment through paypal. If needed contact us for an alternative method SHIPPING We offer combined ... moreshipping Orders are usually shipped within 1 business day of cleared payment International customers feel free to contact us for a better shipping quote. Prices are not necessarily set Orders are usually shipped via USPS Our products come from various sources. We claim no affiliation with the manufacturers of our products. Safety and any other technical or general questions should be taken up with them. We are resellers of these items. And generaly not experts in the field these items pertain to. 071813mwT78 gb2666 Powered by
|
|
|
7.5 Ton Carrier Condenser Unit with Coil
This is a used unit. 208/230 3 phase. Model# 38AK008. In working condition when put into stock. A" coil included. This item is sold"as-is" Buyer needs to arrange shipping. We can place the item on a pallet and load it in a truck. But securing to the pallet and any stretch or shrink wrap would need to be by others. The item will require pick up at our location in Middletown, KY, 40223. We reserve the right to terminate this auction early. As we also have this item for sale locally.
|
|
|
7.5 TON COPELAND AIR CONDITIONING A/C COMPRESSOR ZR94KCTF5 3 PHASE
This is a USED. Sealed Copeland brand scroll compressor, Model#ZR94KCTF5 This is a 230 volt/ 3 phase/ R-22/ 7.5ton A/C compressor that works on most commercial applications. Commercial 3 phase power FOR COMMERCIAL LOCATION THAT USE 208-230 VOLT UNITS USED COMPRESSOR- WAS RECOVERED FROM A COPPER THEFT OIL FLUSHED AND REFILLED WITH DRY. CLEAN OIL. SEALED AND NITROGEN FILLED TESTED AND WORKING GOOD This can replace many 3 ton models. The compressor uses a rotary scroll. Instead of old-fashioned reed valves, for a more reliable compressor. These compressors have a 1 year warranty Comes with a matching capacitor for a complete replacement PLEASE CALL ME AT 214-557-4906 TO PURCHASE THIS COMPRESSOR WITH YOUR CREDIT/DEBIT CARD VISA/MASTERCARD/DISCOVER PAYPAL ALSO GLADLY ACCEPTED SHOULD I BUY FROM A SURPLUS SELLER. OR HERE WITH AC MIKE? Surplus seller: ... moreThem) Doesnt have any tech support No phone# to contact and ask questionns Good luck after sale- item is usually as is Not really sure what they are selling? Here with AC Mike Full tech support for items we sell phone# listed in our eBay store. Call anytime with questions New items have full warranties with warranty support We have full expert knowledge or our items
|
|
|
up to (3) NEW TRANE WSC909A 7.5 Ton Gas Electric Rooftop Heating Cooling AC HVAC
TRANE 7.5 Ton Gas Electric Rooftop Heating Cooling AC HVAC Unit Model WSC909A4R0A04TT 2B(3) Units(New in Crates) available at the start of the listing Call Rob@ 702.595.9491 for Details Units are crated and will ship from Zip Code 89011 Approx weight 950lbs. Visa. MC, Amex, Discover accepted.
|
|
|
1946 Roustabout Huges Keenan 7.5 Ton Tractor Crane Ad wl4519-NQ9HNP
original ad. 5.5 x 12. Produced by Huges Keenan Company, Mansfield, Ohio. This item is AutoLit Part#wl4519-NQ9HNP. Original Automobile.Truck, and Motorcycle Literature, 1900 to Present. The world's largest selection of original automobile literature with over two million items in stock! phone: 315) 432-8282 fax: 315) 432-8256 Walter Miller 6710 Brooklawn Parkway Syracuse. New York 13211 USA phone: 315) 432-8282 fax: 315) 432-8256 PAYMENT INFORMATION: All items listed are factory originals and are in excellent condition unless otherwise specified. You may return anything for any reason within 10 days for a complete refund. SHIPPING& HANDLING CHARGES LIGHT ITEMS- U.S.A. ONLY: U.S.A. Only: For all types of"light items" sales literature. Owner's manuals, sales brochures, magazine ads, race programs, paint chips, photographs, ... moreetc. please add $4.95 per order for first class mail. This charge includes our careful packing, all packing materials and labor. PLEASE NOTE the $4.95 charge only applies to light items(as listed above) For heavier items, see below. Some auctions with smaller items are marked with less postage. For overnight delivery the cost is $19 for light items; contact us for heavier items. NOTE: If you had the winning bid on more than one auction and are sending in your payment for all of the items at once. Add $1 for each additional item. HEAVIER ITEMS- U.S.A. ONLY: U.S.A. Only: For all types of heavier items: All showroom albums. Books, shop manuals, parts books, larger sales catalogs, and other heavier items, add 6.95 per item for media mail. If ordering several heavy items at once, contact us and we will combine shipping and hopefully will be able to lower the price if possible. If items are extremely large, framed or bulky, contact us for a shipping quote. Assuming that correct payment has been made, most items will be shipped within one business day of receipt of payment. Personal checks must clear. FOREIGN AND CANADA SHIPPING: For foreign and Canada. The First Class Internatio
|
|
|
1964 Vietnam 7.5 Ton Blockbuster Bomb Firebase 6 Central Highlands Telephoto
201201-25-1830-NKY Northern Kentucky Photos is eBay's largest seller of historical photos and postcards! Visit my Ebay Store for over 20.000 listings! Item Description Grading Standard: News Agency 1st Generation AKA Original Telephoto Size: 8.5x11 inches(paper size) with some minor variation, Blacklight Test: No. Other Notes: Nice original press telephoto. Do not expect perfect photos. Often old photos have small creases and tears around the edges. Special Note: Additional Information International Purchasers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as"gifts" ... moreUS and International government regulations prohibit such behavior. The"value" on the customs form is the purchase price. Canadian Purchasers: Ebay tends to over charge my Canadian customers in shipping. Canadian customers may want to wait on an invoice before paying. Dispute Limitation No claims or disputes will be accepted after 45 days after the purchase. Photo Grading Standards and Terms Used News Agency Photos: Wire Photos or News Agency Photos were extensively used in print media during the first half of the 1900's. Issued by news agencies(such as Acme. NEA, International News, Associated Press, UPI, Fotogram, Keystone, only to the press, these Gorgeous pieces capture a historical moment, frozen in time, as they were issued on the day the event happened. Unfortunately they were issued in extremely limited quantities solely for print media industry usage(it is estimated that there were approximately 25- 50 of EACH particular photograph made) Over the years, many were destroyed or lost, and in some cases, there are only 1 or 2 specimens known to exist today of a particular photograph making these Original! First Generation Vintage Photographic re
|
|
|
YORK 90k BTU 7.5 TON FURNACE PARTS - BURNER 4 PORT
NEW. SURPLUS& REFURBISHED AUTOMATION COMPONENTS& CONTROLS Telephone: 519-622-4073 Fax: 519-622-8803 E-Mail: sales@aesurplus.com NOTICE: You MUST before bidding BY BIDDING YOU CONFIRM THAT YOU HAVE READ. UNDERSTAND, AND AGREE TO OUR SALES TERMS Do not bid if you do not agree. ITEM DESCRIPTION LISTING IS FOR ONE ITEM AT A TIME ONLY THE PHOTO SHOWN MAY BE REPRESENTATIONAL ONLY YORK 90k BTU 7.5 TON FURNACE PARTS- FOUR PORT BURNER with 6SE01 VALVE E03 9304 025-25437 1/2psi 24VAC.3A REG 3.5 WC DOES NOT INCLUDE THERMOCOUPLE SHOWN Good condition. Pulled from a working application, sold as is. Any questions. Please feel free to email us! Again, Please read the terms and conditions before bidding/buying! LISTING IS FOR ONE ITEM AT A TIME ONLY THE PHOTO SHOWN MAY BE REPRESENTATIONAL ONLY BAC Visit our which is only a fraction of our stock. Listings ... moreare changing daily! We combine shipping and handling costs on m ultiple buys. EBAY FEEDBACK We value our customers, Leave us positive feedback and we will do the same for you. Powered by
|
|
|
7.5 Ton Carrier Air Conditioner Condenser Unit , 208/230, 3 phase with Coil
LOWERED PRICE TO HELP WITH SHIPPING! This is a used unit. R-22, 208/230 3 phase. Model# 38AK008. In working condition when put into stock. A" coil included. This item is sold"as-is" Buyer needs to arrange shipping. We can place the item on a pallet and load it in a truck. But securing to the pallet and any stretch or shrink wrap would need to be by others. The item will require pick up at our location in Middletown, KY, 40223. We reserve the right to terminate this auction early. As we also have this item for sale locally.
|
|
|
Bishamon 2500 lb 1.5 Ton 3PH Electric Pallet Scissor Lift Table 7-43 in 24x48 in
Bullseye Catalog# 31869 Bishamon 2500 lb 1.5 Ton 3PH Electric Pallet Scissor Lift Table 7-43 in 24x48 in SPECIFICATIONS Table Type: Lift only Table Size: Length: 48" Width: 24" Minimum Height: 7" Maximum Height: 43-1/2" Table Power Source: Electric over hydraulic(Electric powered hydraulic pump powers a hydraulic cylinder for smooth operation and precise control) HP: 1.5 Volts: 208-230/460 Phase: 3 Control Type: Hand held pendant control Electric lift table tested and is in good working condition 13' Pendant cord 12' 6" power cord Dimensions: Length 52" x Width 25" x Height 12" Weight: 669 lb 0 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN ... more46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same bu
|
|
|
Roller, Dynapac CC15, 7.5 ton 66" Smooth Drum in good operating condition.
Good smoth drum vibratory roller. On job installing gravel base hydrostatic controls, 66' drum in good condition. Will assist buyer with shipping.
|
|
|
Denison 8-Ton 3-Ph 7.5-Hp Hydroilics Multipress Press FG8C09C23C37A46
Questions? Call us: 1-877-328-9236. Denison 8-Ton 3-Ph 7.5-Hp Hydroilics Multipress Press FG8C09C23C37A46. Manufacturer: Denison Engineering Model: FG8C09C23C37A46 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Denison Engineering Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: When powered up we could get the ram to strike down once or continuously with no problems. NOTE: We could not get the base to rotate. We are not sure what the problem is. We tried adjusting a few things but still have the same issue. No further testing was done. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Denison 8-Ton Hydroilics Multipress Press, Specifications: Manufacturer: Denison Engineering, Model: FG8C09C23C37A46, ... moreSN: 6695, Capacity: 8 Ton, Base Diameter: ~21" Stroke: ~4-1/2" Throat: ~8" 7.5 Hp, 3 Phase, SKU: N31L020 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. This cost includes professional packing& insurance. Handling time is two to three business days after
|
|
|
CAMPBELL 7 TON SNATCH BLOCK WIRE ROPE PULLEY 5/8" Rope
Campbell Snatch Block WLL 7 Ton Bearing GB Pulley 6" Rope Size 5/8" WR Total Length 20" Hook 7" Wide x 7 1/2" Tall#4091V Weighs 31 1/2 lbs 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-1409c380e42-0xf5-
|
|
|
Crosby 7/8" 6.5 Ton Clevis Screw Pin Shackle and Crosby, 3/4" Master Link
Here is a USED Crosby 7/8" 6.5 Ton Clevis Screw Pin Shackle and Crosby. 3/4" 5.25 ton Master Link. Threads are good screws in and out easily. Pictures of the actual item PLEASE ASK ANY QUESTION
|
|
|
5 Ton 1" Strk Kenco 5K-7-100 Punch Press
Untitled Document You are biding on a: 5 Ton 1" Strk Kenco 5K-7-100 Punch Press(No Table) Kenco Taber Industries Model Num. 5K-7-100 S/N: 95-2288 115W 5Tons Item is in good working condition. Boxes may show some signs of shelf wear. These Items were recently acquired from an industry that closed and auctioned their entire inventory. If you need more information please don't hesitate to ask. This would be great for maintenance purposes or a spare. Pictures are of the actual products. We will do our best to disclose this information in the auction. Some items are New Old Stock and some are Used Inventory. None of the items being sold have factory warranties. We generally do not have expertise in a lot of the items we sell and it is strongly recommended that when in doubt an expert in the field be consulted. The items for sale might ... morebe new or used but should be considered used. I browsed for individual pricing on-line. And basically cut the cost to ½ or less of the suggested price. Please check back often to see what has been added– We have a huge inventory of Industrial Control items that will be sorted and sold. Thank you for your interest in Otay Metal Mart. A leading provider of used and reconditioned heavy machinery and surplus metal. For more than 50 years. Otay Metal Mart have supplied the small machine shop industry with quality, new, used and reconditioned equipment and asset metal services. Please feel free to ask questions we are always happy to answer. Karlo Turner Metals Tools and Machines Company Name Otay Metal Mart 195 Mace St. Chula Vista. CA. 91911. All auctions must be paid for within 5 business days. Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 5 business days of the end of the auction. Item may be offered to the next highest bidder or re listed. We accept PayPal. Or Ca
|
|
|
Uni-Hydro 70 Ton Model 70-24 Hydraulic Ironworker 4"x 4"x 3/8" Angle 7.5 HP 3Ph
We are pleased to offer the following Pre-owned Machinery for your inspection: 70 Ton 3 Working Stations Click to view larger photo Specification Description Punch Tons, 70, Punch Capacity, 1-3/4 in 1/2" 1-1/8 in 3/4" 2-1/4 in 3/8" Shear Capacity, 1" x 6" 3/4" x 10" 1/2" x 20" 1/4" x 24" Angle Cutting, 4" x 4" x 3/8" Bar Cut, 1-1/4" Round/Square, Motor, 7-1/2 HP 208/230/460/3, Throat, 9" Dimensions, 46" x 35" x 65" H, Weight, 3000 LB, Equipped With: Punch Station Severing Type Angle Shear(power cavity) Plate Shear(built in) V Notcher Attachment 4" x 4" x 3/8(punch station ot power cavity) 4 Side Shear Blades Magnetic Starter Shipping via Flatbed or Freight at buyers expense. See complete terms below. Offers made on Friday afternoons and ... moreevenings may not be seen as they expire before we return to work on Mondays Maryland Buyers will be invoiced for 6% sales tax. Sales tax will be re-imbursed if buyer provides Centra with a valid Maryland State Manufacturers Exemption Certificate. Please- DO NOT contact Centra for Parts or Service. We DO NOT service or carry parts for any equipment- We recommend contacting the manufacturer Terms& Conditions of Sale for Ebay Items: DELIVERY: BUYER IS RESPONSIBLE FOR SHIPPING. Machine will be loaded free onto Flatbed Trucks. Any other loading type is subject to charges. INVOICES: Your eBay invoice may say that shipping is"Free" this is partially correct because YOU are responsible for the shipment. eBay currently doesn't have a box to put in"Not Applicable" so entering"0" into Shipping triggers its system to mark it as"Free" this is beyond our control, but in no way changes our terms. FREIGHT: We will not crate for freight shipments. If Buyer insists on using a frieght or enclosed van company to pick up machinery, Centra charges a fee to band machine to pallet, cover in cardboard and shrinkwrap(contact us as the fee differs depending
|
|
|
CROSBY IP IPTK 2 TON BEAM CLAMP 3" - 7.5" BEAM WIDTH CAPACITY JAW
CROSBY IP IPTK 2 TON BEAM CLAMP 3" 7.5" BEAM WIDTH CAPACITY JAW Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: IP 2 TON BEAM CLAMP Model# IPTK Jaw 3-7.5" Beam Width Capacity This item appears to be in good used condition. Refer to pictures for details. Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing ... morewhat we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011
|
|
|
SHUTTLE LIFT 3330C CARRY DECK CRANE 7.5 TON CUMMINS 4 CYL ENGINE
SHUTTLE LIFT 3330C CARRY DECK CRANE 7.5 TON CUMMINS 4 CYL ENGINE Equipment. Condition: Used Make: SHUTTLE LIFT Model: 3330C Hours: 5332 Serial Number: 1007/1288 Contact information. Aaron Deplazes 192 INDUSTRIAL PARK DRIVE PEARISBURG. VA 24134 Phone: 540) 599-0592 Email: adeplaze@gmail.com Description. SHUTTLE LIFT CARRY DECK CRANE MODEL: 3330C SERIAL: 1007/1288 CAPCITY: 7.5 TONS 5' 33' BOOM 3 SECTION BOOM WITH 8' JIB HOURS: 5332 CUMMINS 4 CYLINDER DIESEL ENGINE 4 SLIDE OUT OUTRIGGERS SEMI-ENCLOSED CAB PLEASE GIVE US A CALL AT(540)921-2999 MON-FRI BETWEEN THE HOURS OF 8AM- 5PM EST OR GIVE AARON A CALL AT(540)599-0592 WITH ANY QUESTIONS THAT YOU MAY HAVE OR IF YOU NEED A SHIPPING QUOTE. DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDERS. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR ... moreDEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. IF YOU HAVE QUESTIONS ABOUT THIS ITEM, PLEASE CONTACT US BEFORE BIDDING OR BUYING. Photos. About Us. We are a Truck and Equipment Dealer that sells all types of trucks and heavy equipment.We are located in the Industrial Park in Pearisburg Va on us route 100. We are located at 192 Industrial Park Drive Pearisburg. Va 24134. We are aprox 30 miles off of Interstate 81 at exit 118b in VA and 25 miles off of Interstate 77 at exit 9 in WV.We have been in Bussiness over 20 years. We can arrange shipping on anything to anywhere in the world at very reasonable rates.We can and will help out any way we can on every sale! www.Worldwidequipment.com General Terms& Conditions. General Terms& Conditions: Deposit: Deposit of $500 must be paid within 24 hours of auction close. Payment: Items will not be available for pickup or shipping until full payment is received and cleared by our local bank. Buyer has 5 days to pay. Return Policy: If you are not satisfied with your equipment upon delivery. Please notify us immediately. Returns accepted within 5 days of purchase. You will be responsible for return shipping. Financing: We offer
|
|
|
American Standard Trane TWA090A300FA Split System 7.5 Ton Heat Pump
American Standard Trane TWA090A300FA Split System 7.5 Ton Heat Pump THIS HEAT PUMP/COMPRESSOR IS USED. BUT IN GOOD CONDITION. ITEM WAS REMOVED FROM FORMER LOCATION IN WORKING CONDITION. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: Model# TWA090A300FA APPROXIMATE PRODUCT DIMENSIONS: WIDTH: 41" LENGTH: 34" HEIGHT: 39" SHIPPING WEIGHT: 400 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. ... moreTHE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS W
|
|
|
LIFT TECH SHAW BOX 7.5 TON/15K LB OVERHEAD CABLE HOIST w TROLLEY MOTOR
LIFT TECH SHAW BOX 7.5 TON/15K LB OVERHEAD CABLE HOIST w TROLLEY MOTOR MODEL-72D07039D142202 SERIAL-K4-79973 CAPACITY-7.5 TON THIS IS A NICE OVERHEAD HOIST WITH TROLEY SYSTEM. UNIT HAS CABLE. COMES AS PICTURED. I HAVE ANOTHER OF THESE UNITS. BUT IS 5 TON CAPACITY.SEE MY STORE UNDER"INDUSTRIAL EQUIPMENT" THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION. THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this ... morepage are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing th
|
|
|
FASTORQ AS105 HYDRAULIC NUT SPLITTER 25 TON NUT CAPACITY 5/8" TO 1 7/16"
FASTORQ AS105 HYDRAULIC NUT SPLITTER 25 TON NUT CAPACITY 5/8" TO 1 7/16" FASTORQ AS105 HYDRAULIC NUT SPLITTER 25 TON NUT CAPACITY 5/8" TO 1 7/16" PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
7.5 TON 18.5' ECONOLINE BACKHOE EQUIPMENT TRAILER BULL DOZER TAG DUMP TRUCK
UNIT WILL SELL TO THE HIGHEST BIDDER SO ONLY BID IF YOU WANT TO OWN IT THIS AUCTION IS FOR A 1986 BUTLER TRAILER GVWR IS AROUND 15.000 LBS OR 7.5 TONS OR A LITTLE MORE THEY ARE EITHER 5,000 OR 6,000 LB AXLES JUST NOT SURE JUST BOUGHT TO RESELL BUT DID USE IT TO HAUL HOME A LOAD FOR 150 MILES BEHIND A 3/4 TON PICKUP TRUCK AND IT PULLED GREAT TIRES HAVE GOOD TREAD BUT MOST HAVE WEATHER CHECKING COMES WITH 3 SPARE TIRES ON RIMS GREAT FOR SMALLER BACKHOE OR DOZER GUESSING TRAILER IS AROUND 4000 EMPTY DECK IS 8' WIDE 14.5' LONG WITH 4' DOVER FOR A TOTAL OF 18.5' FRAME IS IN GOOD CONDITION WITH NO RUST OUT JUST SURFACE RUST I DO NOT KNOW IF THE LIGHTS OR ELECTRIC BRAKES WORK HAS NO PLUG ON IT SO I USED MY TEMPORARY LIGHTS ON IT. WOULD SAY IT NEEDS SOME WIRING WORK. HAS NO INFO TAG ON TRAILER SO GUESSING AT WEIGHT AND GVWR BUT WOULD ... moreSAY AXLES ARE AT LEAST 5.000 LBS EACH WILL NEED SOME DECK BOARDS REPLACED BEING SOLD AS IS WITH NO WARRANTY FEEL FREE TO EMAIL AND SET UP A TIME TO CHECK HER OUT I CAN DELIVER TO YOU FOR $2.50 A LOADED MILE EMAIL ME WITH ANY QUESTIONS OR FOR MY NUMBER SO WE CAN TALK I AM AN OHIO TITLE VEHICLE DEALER SO IF YOU ARE FROM OHIO AN SOME OTHER STATES YOU WILL PAY ME THE SALES TAX AND I WILL TURN INTO THE STATE. YOU WILL RECEIVE TITLE IN 5 DAYS. YOU WILL FILL OUT TITLE AT TIME OF PAYING FOR TRAILER AND RECEIVE A BILL OF SALE. I GUARANTEE YOUR SATISFACTION! PLEASE READ ALL OF THE AUCTION TERMS LISTED BELOW.YOU AGREE TO THEM BY BIDDING. IF IT IS NOT LIKE I SAY IT IS YOU DO NOT HAVE TO BUY WHEN YOU COME TO PICK IT UP. AND I WILL HAVE NO HARD FEELINGS: MUST BE PAID FOR WITH IN 7 DAYS FROM END OF AUCTION! WINNER MUST CONTACT ME WITH IN 24 HOURS AFTER THE END OF AUCTION OR I WILL RELIST ITEM. YOU CAN PAY AT TIME OF PICK UP IF WITH IN THE 7 DAYS The long term storage of paid for items is causing all of us more and more problems. I can store paid items for up to 30 days and then the item will be disposed of without compensation. If you need more time. Contact me prior to the 30th day. Each a
|
|
|
LARGE CROSBY 319N 7.5 Ton Hoist Chain Fall Puller KC Shank Hook & Latch Assembly
LARGE CROSBY 319N 7.5 Ton Hoist Chain Fall Puller KC Shank Hook& Latch Assembly LARGE CROSBY 7.5 TON HOIST CHAIN FALL PULLER HOOK ASSEMBLY! REFURBISHED EXCELLENT CONDITION! APPEARS TO NEVER BEEN USED. COMES WITH THE FOLLOWING: MODEL 319N HAS A KC Y5L 45 MARKED ON IT THE HOOK MEASURES AROUND 13" TALL X 7.5" WIDE INCHES IN OVERALL SIZE! HAS AROUND 2.5" THROAT WIDTH! HAS A SAFTEY LATCH INCLUDED! THE SHANK IS THREADED. MEASURES 1-3/8" IN DIAMETER! COMES WITH A CASTLE AND THRUST BEARING. SHANK MEASURES AROUND 4-1/4" IN LENGTH! CROSBY IS ONE OF THE BEST IN THE BUSINESS! WELL TRUSTED FOR THE DURABILITY AND STRENGTH OF THERE HOOKS! WE HAVE SOLD MANY OF THEM AND NO COMPLAINTS! UNBEATABLE PRICE! WE MADE SURE THAT NO ONE ONLINE WILL BE ABLE TO BEAT THE PRICE OF THIS HOOK. YOU WILL NOT FIND THIS HOOK CHEAPER ANYWHERE! EMAIL ... moreUS WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS!
|
|
|
A.C. UNITS; 3 phase- 10/7/5 ton=self contained;DEAL!
used. Dont know the specs, im a chic. have no use for them now. need the cash. 512-605-9061 call leave VM or text. Will deliever.great for start up biz, they are 3 phase, but work good. my buddy is an AC guy, he upgraded a restaurant. u come get them within 48 hours and ill sell for 3500. 512-605-9061
|
|
|
yale wire rope electric hoist 5 ton lift chain lifting 10,000lb capacity 7.5 hp
Up for sale is a used yale 5 ton electric wire rope hoist. Model ld5d35s20/7. 440volt, 3phase, 2 speed, 7.5 hp, 22 amps. In good condition overall and ready to put to work. Buyer is responsible for arranging and paying for freight. Includes everything shown in the picture. Wire rope is in nice shape with no fraying. I will palletize and load free of charge. Please see pics and email with questions.
|
|
|
Koolant Koolers 7.5 Ton Chiller, 98,000 BTU/Hr HCV7500PR-NF-FILT-M
Heat Exchanger. Water to Air Cooler, Condenser, Thermal Care, Accu Chiller, Riedel, Rittal, AEC Lydallm Polyscience. PHOTO IS NOT ACTUAL UNIT. 575 Volts. 3HP Main Pump, Main Recirculating Pump Flow/PSI 24/72. Looking for other Rofin parts not listed here? Please call 734-456-3100 option 2. Items shipped to the following states will be charged applicable sales tax: Arizona California Georgia Illinois Michigan Minnesota New Mexico New York Ohio South Carolina Texas Utah Washington Wisconsin
|
|
|
3-TON HEAVY DUTY CHAIN HOIST HOOK 10" x 5" weight approx. 7 lbs
3-TON HEAVY DUTY CHAIN HOIST HOOK
|
|
|
Proto 5 Ton 3 Jaw Reversible Gear Puller 7"
Proto 5 Ton 3 Jaw Reversible Gear Pull 7" Its practical new. It lists for $98.53 on Tacoma Screw page 600. Item#491-101. Model#J4046. weighs 2.97 lbs. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143880fba33-0xf9-
|
|
|
Crosby 7.5 ton swivel crane hook with safty latch
7.5 ton Crosby swivel hook with safty latch.
|
|
|
Enerpac RC57 5 Ton 7" Hydraulic Cylinder AF
Enerpac RC57 5 Ton 7" Hydraulic Cylinder AF We have for sale an Enerpac RC57 5 Ton 7" Hydraulic Cylinder. This is a lightly used item. In great condition, it works very well, and shows only very light wear from being previously owned. We accept PayPal. And we require payment within 24 hours of the purchase. If we do not receieve payment within 24 hours of the purchase, the item will be relisted this is due to consistant non-payment, sorry. If you contact us we are more than happy to work with you. We do not ship on weekends or holidays. Sorry. All items 13oz or less are shipped first class. USPS. All other items will be shipped with Economy Shipping, either USPS or FedEx. All items are generally shipped within 24 hours of purchase. We accept returns on all of our items within 14 days of receipt of the item. If the reason for your ... morereturn is because of a shipping or listing error on our behalf. We will pay the return shipping. We are a company dedicated to providing fine products at an affordable price. We pride ourselves on our customer service. And satisfaction, and we want to ensure that you recieve the best we can offer. We take great care to make your experience with us a pleasent one. If you have any questions please feel free to contact us. You can call our store at(810) 391-2359. Our hours are Monday through Friday 9am- 8pm Eastern Standard Time. We ship everything from our store location at G-3085 S. Dort Hwy. Burton. MI 48529 USA. Feel free to contact us if you have any comments or concerns.
|
|
|
Trane 7.5 Ton Air Handler
Trane 7.5 Ton Air Handler Seller is selling the assets set forth on an“as is. Where is” basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability. Merchantability or fitness for any particular purpose. Loading. Shipping, and special handling(palletizing or crating) will be an additional cost. If payment is not received within 10 days of sale. We reserve the right to resell the item. Purchased items that are not shipped or picked up within 14 days of sale date are subject to a monthly storage charge of $1.00/sq. ft. min $75.00/mos) All sales are final. No return will be accepted unless the item is not as described. Sales made to California buyers will have sales tax added unless a valid tax resale number is provided.
|
|
|
Airedale PAH-900 Portatemp 7.5-ton Air-cooled Chilled Water System + air handler
Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Airedale PAH-900 Portatemp 7.5-ton Air-cooled Chilled Water System and Matching Fan Coil Unit FEATURES: Manufactured by Airedale North America in the United States, Excellent for portable or emergency cooling applications, Includes controller. Fan unit, hoses and cables, 7.5 tons of cooling Serial# 07189601 2609, Manufactured 7/18/96, Input 120V 60Hz 15A indoor unit, 220 volt 3 phase 50 amp service needed for outdoor chiller unit. r22 refrigerant 11# Controller is 370 lbs. 36" x 22" x 77" Fan unit is 840 lbs. 32" x 34" x 61" Hoses and cables are 706 lbs. 48" x 42" x 32" 1920 lbs approximate total weight on 3 pallets, CONDITION: Condition looks good. Functional but not ... moretested. Will test good before shipping if you pay the BIN price. New cost over $20K. These were used by the phone company to provide temporary cooling of remote switch gear buildings while built in HVAC was being repaired. Would work good for portable event trailers or small surgical unit backup. Or additional server room cooling, etc. is located in Racine. Wisconsin. CA Inventory# 5586 NOTES: packing& shipping is very costly. used& parts, understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase response time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, li
|
|
|
Crosby 7.5 Ton Crane Hook w/ Safety Latch on Bulldog Lift Choke
Used Crosby 7 1/2 Ton Hook in good functional used condition. Hook has safety latch option. No rust. Only a little worn paint. Hook is on a 7 foot 8" long Bulldog Lift Choke. Choke has some wear in ring at top and as seen in pictures. The wear on the choke hasn't compromised the integrity of its strength though(minimal rubbing wear) Choke has Bulldog lift stamped multiple times down it. Weights around 20 pounds and overall is a very good looking hook. If you have any questions please feel free to ask. Thanks for Looking!
|
|
|
HILMAN ROLLER 7.5 TON RIGGERS SKATE --- L@@K
HILMAN ROLLER 7.5 TON RIGGERS SKATE HILMAN ROLLER 7.5 TON RIGGERS SKATE All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
7.5 (7-1/2) Ton Capacity Shawbox Hand Push Trolley
7.5(7-1/2) Ton Capacity Shawbox Hand Push Trolley. It's the Blue unit in the picture. The yellow unit is a 10 Ton Acco Motorized trolley that's in another auction. If you need further info email me. Unit sell for over $1.500.00 New. stacker 19A*Store Policy* I DO NOT ACCEPT PAYPAL Please do not ask about shipping. All emails regarding shipping will not be answered. The reason for this is because my day is filled with freight inquiries, I deal mostly with Industrial items that are too large to accommodate the request at the time. I package the item once the auction is over, weigh it and get the shipping charges based on your zip code and I will send a total amount due in an email to you. I only ship by UPS. I will not ship any other way. All other items that can't be shipped via UPS because they are over the limit will be shipped ... moreby a common freight carrier. If you want to pick the unit up, please indicate that at then end of the auction. Credit card customers: there is a 5% convenience fee. Items are listed in their known condition at the time the ad is placed. Items are sold“as is” and we are not liable for items that are DOA. Take a look at my store for other interesting items. You’ll never know what you’ll find here. The owner is a pack rat and it’ll take me the rest of my life to get everything on ebay. We have Industrial equipment to personal items for sale. If you don’t see what you are looking for please feel free to drop me an email and ask if I have it. I just might. Thanks for looking. INDUSTRIAL LIFTING STORE AND MORE
|
|
|
ENERPAC RC-57 HYDRAULIC CYLINDER 5 Ton, 7 In Stroke W/ ENERPAC FITTING 7" inch
ENERPAC RC-57 HYDRAULIC CYLINDER 5 Ton. 7 In Stroke W/ ENERPAC FITTING 7" inch This cylinder was taken from a working machine shop. As you can see. It has significant signs of wear. It has not been tested and is being sold strictly as-is. The label is missing, but based on its dimensions, but I believe this is a model RC-57. MAKE AN OFFER– DON’T MISS THIS ONE! Buyer pays shipping as calculated in the shipping calculator at the bottom of this page. Local bidders(near Philadelphia. PA) are welcome to pick it up and save on shipping. No personal checks. Please. Thank you and good luck! We accept Paypal. Please make payments within 5 days of auction close. All items will ship within 1-2 business days of receipt of payment. For any special shipping instructions. Please send an email through eBay. inkfrog terapeak. I000000. Analyzing"Smart ... moreCounters" only at inkFrog inkFrog Analytics.
|
|
|
7.5 Ton - INGERSOLL-RAND 7 1/2 Ton Electric 230-460v 3 Phase, 40 ft Chain Hoist
7.5 Ton- INGERSOLL-RAND 7 1/2 Ton Electric 230-460 volt 3 Phase. 40 ft Chain Hoist This is a very heavy-duty hoist. Pendant Control shows signs of wearing/cracking. But does function properly. Needs new home. On Pallet ready to be picked up or shipped via freight hauler of your choosing. Model: Single Speed LE Series Capacity: 7.5 Ton Standard Lift: 40 ft. Voltage: 220-240 or 440-480 volt 3-phase Suspension: Rigid Hook Designed specifically for general commercial applications. Way expensive when it was new. Free Pick-Up in Riverside. Iowa, 52327. Shipping weight on pallet Is 680 lbs. I put this information in to eBay for an estimate. Buyer will find carrier. Make payment to them for carrier services, and dispatch them to my location for pick-up. Thanks We can ship heavy items via freight. But ask the buyer to make the arrangements with the ... morehauler directly. We do NOT have a dock here at our location. Our zip code is 52327. I recommend the outstanding pricing and services of Spee-Dee shipping company for shipments to Minnesota. Wisconsin. Illinois. Iowa and Nebraska.
|
|
|
Dawson Steel Plate Lifter Shackle 7.5 Ton
This is a Dawson ground release shackle. Steel Plate or beam lifter. Serial# ET35T1 SWI 7.5 Ton. You can go on there website and see catalog still. It would be on world wide web dcpuk.com.
|
|
|
LENNOX 7.5 TON A/C UNIT 208-230volt/3phase model LCA088H
THIS IS A GREAT WAREHOUSE FIND. IT IS A LENNOX 7.5 TON COOLING PACKAGE UNIT. HIGH EFFICIENCY. 208-230 VOLT/3PHASE. 2HP STD BLOWER MOTOR, ELECTRIC HEAT 22.5KW. I HAVE ALL OF THE ORIGINAL PAPERWORK. I DO NOT HAVE ANY HISTORY ON THIS UNIT, IT HAS BEEN STORED INSIDE OF A WAREHOUSE. IF YOU ARE INTERESTED IN SEEING THE ITEM IN PERSON I CAN GLADLY SHOW IT TO YOU. IT IS THE BUYERS RESPONSIBILITY TO MOVE THE ITEM, I HAVE NO WAY TO MOVE THIS. SELLING AS IS. NO WARRANTIES.
|
|
|
AIR COOLED 7.5 TON STERLING STERL COOL CHILLER PLASTIC INJECTION MOLDING
Just in Sterling 7.5 Ton Air Cooled Chiller. This chiller is a working unit. We tested for a day and works great. 1 Hp pump motor. 460 Volts 3 phase. Freight or personal pickup is accepted. Buyer pays freight. Chiller will be skidded banded and stretched rapped for free. Will crate for a small fee.
|
|
|
ENERPAC RC-57, Cylinder, Steel, 5 Ton, 7.00 In Stroke Rebuilt Nice!
ENERPAC RC-57. Cylinder, Steel, 5 Ton, 7.00 In Stroke.Rebuilt with genuine Enerpac parts.Old school Enerpac purple! Posted with
|
|
|
IP (now Crosby) Plate Clamp, 4.5 ton, 7" capacity, 9 IPPE, for stacked plates
12.00 IP(Crosby) Plate Bundle clamp IP(now Crosby) Plate clamp. 4 Available) Model: 9 IPPE Capacity: 0” to 7-1/8” thick Weight Capacity: 4500 KG.9000 lbs) Each clamp(Designed to use in pairs: 9 Tons(18.000 lbs. per pair) These clamps are designed to be used in pairs(or more) and pick-up a stack of steel plates(laying flat) at one time(up to 7” thick) Can also be used to pick up one thick plate up to 7" We Recomend buying as a pair or all four together. Very good condition with little wear. Minor rust and paint damage due to industrial use. Recently oiled. Please see the Crosby Group Catalog for more information: http:www.thecrosbygroup.com/html/default.htm#en-US/410 Please call or email with any questions: Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE SHIPPING: Call or email. Currently ... morestored at our warehouse in Oregon 97424. For further information CONTACT: BHC Inc. Ben Howell(541) 942-1277 benh.bhc@gmail.com Thank you
|
|
|
NO RESERVE! CASE DROTT CARRYDECK CRANE 7.5 TON-LOW HOURS-NEW PAINT!!
CASE/DROTT 3330B 15.000#CPY. 7.5 TON 3 PART SHEAVE/BLOCK LPG/PROPANE 4 CYLINDER ENGINE- FIRES RIGHT UP. RUNS& OPERATES AS IT SHOULD 2WD MAXIMUM CAPACITY- 15.000# 7.5 TONS HOUR METER- 1.240 LO-HI RANGE HYDROSTATIC DRIVE HYDRAULIC POWERED OUTRIGGERS SCOPE IN/OUT& UP/DOWN 20'6" HOOK REACH 2-SECTION BOOM CROWD 360 ° SWING RADIUS SOLID/CUSHION TIRES REAR STEERING MACHINE DIMENSIONS- 11'10"L x 6'5"W x 95"H TERMS& CONDITIONS: If you have any questions. Please call John at 412-823-8890. All questions and/or offers will be responded to during regular business hours Monday-Friday 7:00 A.M.3:30 P.M EST. Payment in FULL must be received within 7 business days of auction closing, unless prior arrangements have been made. By bidding on an item, you accept the terms noted above. Return Policy ALL SALES ARE ... moreFINAL and ALL ITEMS ARE SOLD AS IS. We sell USED equipment. In most cases, we are unable to test the equipment for its specific application. So PLEASE know what you are buying before you bid. We are happy to share any information we have on any product to help you make an informed decision. Please carefully review each item description and photos. If you have questions about what is included or its condition, please ask before you bid! E-BAY user PAEQUIPMENTRENTAL makes no warranties, express or implied, and Pa Equipment Rental, Inc. expressly excludes and disclaims any warranty of merchantability, non-infringement or fitness for a particular purpose. Pa Equipment Rental, Inc. assumes no responsibility for any inaccuracies, including without limitation any pictures, descriptions or other information relating to the assets as contained on the this website, or other communications, electronic or otherwise. Payment Options We accept the following payments: Checks, Cashier's Checks, Bank to Bank Wire Transfer. For purchases over $10,000, wire transfer is preferred. PayPal is accepted for deposit only. We also accept credit cards. Please contact seller for more information.
|
|
|
Texaco 1930 2.5 Ton Tanker Truck Bank Ertl Co. 1990 Edition #7
This Texaco Tanker Truck bank measures 8" long and 2.5" wide. It does have the key to the bank. Great collectible. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144a169187b-0x105-
|
|
|
1933 North Carolina License Plate X 7 483 5 1/2 TON
1933 North Carolina License Plate X 7 483 5 1/2 TON in original condition as shown in pictures. VERY RARE. Small area under 33 is rusted out. NO RETURNS SO ASK ANY QUESTIONS BEFORE BIDDING. SHIP TO USA LOWER 48 STATES ONLY! I COMBINE SHIPPING ON ITEMS SOLD ON THE SAME DAY!
|
|
|
McKissick Shackle Clevis 8.5 Ton WLL 22mm 7/8" USA FEB148
McKissick Shackle WLL 8.5 Ton 22mm 7/8" Made in the USA
|
|
|
Krack CFDS1G-2010-4-7.5, 10.65 ton, Ammonia Centrifugal Cooler Evaporator
Krack CFDS1G-2010-4-7.5. 10.65 ton, Ammonia Centrifugal Cooler Evaporator 230/460 Volt. 3-Ph Unit includes 1centrifugal fan. 4 fins per inch. 7.5 HP fan motor(belt drive) and hot-gas coil. Unit designed for recirculated bottom feed operation. Approximate weight: 3.700 lbs. Approximate Dimensions: 81"x93"x52" 127.900 BTUH@ 10 degree TD Questions about this unit?
|
|
|
Robbins & Myers R&M 7.5 Ton Electric Trolley Hoist 460 Volts 3 Phase Wire Rope
Description You are bidding on one(1) Robbins& Myers Electric Hoist. Type: F5M. Capacity: 7 1/2 Ton. 460 Volts. 3 Phase. Reuland Motor. Model: 9259-BA6405A. Type: A00D. 15 HP. 3 Phase. 60 Hz. 1200 RPM. 230/460 Volts. 36/18 Amps. Condition Item is used; For parts only. Shipping& Handling Buyer will need to pay for and make freight shipping arrangements. If you need assistance with shipping quote. Please provide us with: Physical address(Commercial/Residence) Access to a fork lift? We will put your item on a pallet at no extra cost. The overall dimension is 51" x 48" x 40" Shipping weight is approximately 2384# Ships from Baton Rouge LA 70815. This is a business location with a fork lift. We will ship within 48 United States ONLY. Tax Louisiana residents will be charged a 4% sales tax.
|
|
 |