|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Millersburg, United States Magnetic chuck. Part Number 612. Model Super 612. Lift Tables. Manual oiler unit. Our mission is to empower industries with the tools and solutions they ... moreneed to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Lebanon, United States To View under Power, Follow the Link Below. Grinding Pocket 6” x 12” x 12”. Inspect Under Power. 6” x 12” Walker Permanent Magnetic Chuck. Weight 900 ... moreLBS Approx.
Buy It Now
Condition: Used Location: Holland, United States This is a USED Harig Super 612 manual surface grinder that has a Walker Ceramax 6"x12" permanent magnetic chuck mounted on it. Motor is 208/220/440-Volt, ... more3-phase and is 1 H.P., with RPM's of 3450/2850, depending on how it is wired.
Buy It Now
Condition: Used Location: Hugo, United States Harig Super 612 Surface Grinder General Info: Stock# GS-131063 Condition: Used. Good Tested: Yes. Working Condition Brand: Harig Model: Super 612 Shipping ... moreWeight: 900 Lbs. Shipping Dimensions: 48" L x 40" W x 88" H Location: Stone Mountain. GA Specifications: Table Travel 15" Cross Travel 6.5" Head Height Adjustment 9" Motor 1HP/ 208-220/440V(Wired 220) 3 Ph. Additional Info: Currently. There is no wire attached to the handle to move the cross travel on the surface grinder so the cross travel does not work. Everything else on unit is good. The nut to lock down grinding wheel is missing. Manual and other miscellaneous accessories included. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1308-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
Buy It Now
Condition: Used Location: Clare, United States Harig manual surface grinder. Specifications: Model: Super 612 Chuck Size: 6" x 12" Bed Way: Roller Bearing Magnetic Chuck: Manual Phase: 3 HP: 1 Volts: ... more208-220/440 RPM: 3450 Condition: Good working SHIPPING OPTIONS: Standard Truck Freight (4 to 8 Days delivery time): Contact for Quote Local Pickup: FREE International Shipping: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website!.
Buy It Now
$10.50 Shipping Condition: Used Location: Dunedin, United States This Custom made stop fixture has worked on multiple Harig Grind All # 1 tools and should work on yours. of the Grind All # 1 from the handle end and ... moreyou Only Snug the screw on the end to push out the small bearing and hold it in place.
Buy It Now
Condition: Used Location: Rochester, United States Make: Harig. Type: Surface Grinder. Model: Super 612. Includes installed Walker Ceramax 6" x 12" Magnetic Chuck. Size: 6" x 12". make Supersized seem ... moresmall.
Buy It Now
Condition: Used Location: Bridgeport, United States Harig Super 612 Hand Feed Surface Grinder. Spindle sounds good. Set to run on 220 volts, 3 phase. Feel free to inspect under power.
Buy It Now
Condition: Used Location: Harrison, United States 6" Width 18" Length Harig 618 AUTOMATIC, 2X DRO, POWER TABLE & CROSSFEEDS SURFACE GRINDER, SPECIAL H. 6" X 18" HARIG HYDRAULIC FEED SURFACE GRINDER. - ... moreHARIG "FLO-CLEAN" AUTO LUBRICATION SYSTEM. 0 TO 3/32".
Buy It Now
Condition: Used Location: Harrison, United States 6" X 18" HARIG "E-Z SURF" CNC SURFACE GRINDER. MODEL: EZ-SURF S/N: 193-EZ NEW: 1996. VARIABLE TABLE SPEED, HYDRAULIC. 36" IPM TO 70' FPM. CAST IRON CONSTRUCTION ... moreINCLUDING BASE. CNC AXES ARE NICE & SMOOTH .
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. MODEL. . SUPER 618. 1,000s of industrial machine tools bought and sold every year. AREA OF CHUCK. . 18" X 6" X 3-1/2". Performs ... moreas expected.
Buy It Now
$20.00 Shipping Condition: Used Location: Sheffield, United States 5 - SMALL CLAMPING VEE'S OR PRISMS. I ALSO USE MY SET WHEN I HAVE A LOT OF INSERTS TO FIT. I PUT THE SMALL INSERT IN THE SUPER WEE AND CLAMP IT, THEN ... moreHOLD ONTO THE SUPER WEE. THIS SAVES MY FINGERS FROM CRAMPING UP.
Buy It Now
$20.00 Shipping Condition: Used Location: Sheffield, United States I ALSO USE MY SET WHEN I HAVE A LOT OF INSERTS TO FIT. I PUT THE SMALL INSERT IN THE SUPER WEE AND CLAMP IT, THEN HOLD ONTO THE SUPER WEE. THIS SAVES ... moreMY FINGERS FROM CRAMPING UP. SUPER WEE BLOCK SET.
Buy It Now
$20.00 Shipping Condition: Used Location: Sheffield, United States 5 - SMALL CLAMPING VEE'S OR PRISMS. I ALSO USE MY SET WHEN I HAVE A LOT OF INSERTS TO FIT. I PUT THE SMALL INSERT IN THE SUPER WEE AND CLAMP IT, THEN ... moreHOLD ONTO THE SUPER WEE. THIS SAVES MY FINGERS FROM CRAMPING UP.
Buy It Now
Condition: Used Location: Holland, United States MODEL. . HARIG SUPER 618. YODER MACHINERY SALES. LONGITUDINAL. 20". Performs as expected. May inspect under power. MOTOR. . 1.5. STANDARD POLE. .
Buy It Now
Condition: Used Location: Sicklerville, United States Walker Ceramax 612 Close Pole Chuck.
Buy It Now
Condition: Used Location: Bridgewater, United States Click Photo(s) to Enlarge Stock Model Age 2490, Super 618 2-Axis Auto 1992, Specification Description Table Working Surface, 6" x 18" Max Chuck ... moreSize, 6" x 18" Max Table Movement(Manual) 19" Spindle Drive, 1 HP, Max Distance Wheel to Table, 12" Under 7" Wheel, Max Wheel Size 7" x 1/2" x 1.25" Hole, Wheel Speed, 3450 RPM, Equipped with: Vacu-Guard Wheel Guard. Wheel Hub and Nut, Harig 6"x18" Permanent Magnetic Cross Pole Chuck, 2-axis Hydraulic Automatic Feeds, hand Wheel Head Feed, 1 HP Spindle Drive Motor and Controls. 220/ 440 Volt. 3 Phase FOB Truck. Payment Methods Accepted: Wire Transfer. Cashiers Check, Or Money Order. Or Call us at 763-745-1166 Machinesused.com
Buy It Now
Condition: Used Location: United States NICE WELL KEPT MACHINE. HAS 6 X 18 ELECTRICAL FINE POLE CHUCK, COOLANT TANK, HAS SONY DRO SCALES BUT NO D.R.O. WE CAN LOAD ON TO YOUR TRUCK OR TRAILER, ... moreEAST DUNDEE, IL. 60118 847-494-2360
Buy It Now
Condition: Used Location: Alto, United States Asset #8718. Cross feed travel 6-1/4". Cross feed handwheel graduation. 001. Grinding wheel maximum capacity 8" x 1-1/4". Floor area cabinet 40" x 31". ... moreApproximate weight of machine 638 lbs. We are always looking to buy machinery – 1 piece or entire plants.
|
|
|
|
HARIG SUPER 612 SURFACE GRINDER + MAGNETIC MAGNA-LOCK CHUCK
HARIG SUPER 612 SURFACE GRINDER + MAGNETIC MAGNA-LOCK CHUCK Click Images to Enlarge HARIG SUPER 612 SURFACE GRINDER + MAGNETIC MAGNA-LOCK CHUCK ARBOR: 1-1/4" TABLE TRAVEL: 15" CROSS TRAVEL: 6.5" HEAD HEIGHT ADJUSTMENT: 9" 1 HP PHASE: 3 208-220/ 440 VOLTS 2.8 AMPS 50/60 HZ RPM: 3.450/ 2,850 LOADING FEE: $20 OVERALL MEASUREMENTS: 36" x 39" x 77" WEIGHT: 842 LBS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will ... morebe from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlo
|
|
|
Harig Super 618 2-Axis Automatic Surface Grinder
Click Photo(s) to Enlarge Stock Model Age 2490, Super 618 2-Axis Auto 1992, Specification Description Table Working Surface, 6" x 18" Max Chuck Size, 6" x 18" Max Table Movement(Manual) 19" Spindle Drive, 1 HP, Max Distance Wheel to Table, 12" Under 7" Wheel, Max Wheel Size 7" x 1/2" x 1.25" Hole, Wheel Speed, 3450 RPM, Equipped with: Vacu-Guard Wheel Guard. Wheel Hub and Nut, Harig 6"x18" Permanent Magnetic Cross Pole Chuck, 2-axis Hydraulic Automatic Feeds, hand Wheel Head Feed, 1 HP Spindle Drive Motor and Controls. 220/ 440 Volt. 3 Phase FOB Truck. Payment Methods Accepted: Wire Transfer. Cashiers Check, Or Money Order. Or Call us at 763-745-1166 Machinesused.com
|
|
|
Harig Super 618 Surface Grinder 6" x 18"
NICE WELL KEPT MACHINE. HAS 6 X 18 ELECTRICAL FINE POLE CHUCK, COOLANT TANK, HAS SONY DRO SCALES BUT NO D.R.O. WE CAN LOAD ON TO YOUR TRUCK OR TRAILER, EAST DUNDEE, IL. 60118 847-494-2360
|
|
|
6" X 12" HARIG "SUPER" HAND-FEED HORIZONTAL SPINDLE SURFACE GRINDER - #25833
QUOTE# 25833. 6" x 12" HARIG"SUPER" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER New 1979. Serial No 11807, Model 612, Series"SUPER" EQUIPPED WITH: 6" x 12" Walker Electro-Magnetic Chuck CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 6" x 12" Grinding Width Capacity. Maximum. 6" Grinding Length Capacity. Maximum. 12" Height Under 7" Grinding Wheel. 12" Table Longitudinal Travel. 12.75" Table Cross Travel. 6.75" Grinding Wheel Diameter. Standard. 8" Grinding Wheel Width. Standard. 1.25" Elevating Handwheel Graduations. 0005" Crossfeed Handwheel Graduations. 001" Grinding Wheel Spindle Motor. 1 HP/3450 RPM Electrical System. 208-220-440/3/60 Weight. Approximately. 1000 LBS CONDITION: Appears to be in Very Good Condition. PRICE: F.O.B. ... moreOUR WAREHOUSE. $1.950.00. All machines/equipment subject to prior sale.
|
|
|
Harig Super 612 Hand Feed Surface Grinder
Harig Super 612 Hand Feed Surface Grinder Search Harig Super 612 Hand Feed Surface Grinder ARBOR: 1-1/4" TABLE TRAVEL: 15" CROSS TRAVEL: 6.5" HEAD HEIGHT ADJUSTMENT: 9" 1 HP PHASE: 3 208-220/ 440 VOLTS 2.8 AMPS 50/60 HZ RPM: 3.450/ 2,850 LOADING FEE: $20 OVERALL MEASUREMENTS: 36" x 39" x 77" WEIGHT: 842 LBS We are a liquidator. And as such what you see in the photographs is what comes with the machine. No other accessories are available or implied. This machine is sold as is/where is. This listing is for local pickup only. We can load onto a truck at no additional charge. We can palletize this unit for shipping for an additional fee. Please contact us for alternative shipping methods. We are able to assist you with domestic or international shipping. We can process VISA/MASTERCARD/ DISCOVER/AMERICAN EXPRESS ... morepayments. Please ask for details. Thank you for your interest. We hope to serve you soon. Please feel free to contact us anytime. Questions will be answered within 1 business day. Hablamos español Somos una empresa profesional de transporte y exportacion de maquinaria. Si desea exportar o mudar una maquina que encuentre en ebay, que este en los E.E.U.U. Incluso los de otro vendedor, podemos ayudarle. Proveemos varios servicios de cargamento, incluyendo colocación en un contenedor. Transporte, y descarga. Estamos disponibles para servirle con el envío de su mercancía. Thank you for your interest. We hope to serve you soon. Please feel free to contact us anytime. Questions will be answered within 1 business day. For customer service assistance. Please call: 626-797-3685 For all your machinery moving needs California Machinery Movers info@californiamachinerymovers.com www.californiamachinerymovers.com
|
|
|
Harig 618 Super 6 X 18 Inch Surface Grinder
Item Name: Harig 618 Super 6 X 18 Inch Surface Grinder Item# 8034 Price/Each: $2.695.00 Year: Brand Name: Hairg Model: 618 Serial# Asset Tag: Item Location City: Thomaston State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Harig 618 Super 6 X 18 Inch Surface Grinder. Harig Surface Grinder. New in 1977 LONGITUDINAL TRAVEL 19" CROSS FEED TRAVEL 6-3/4" VERTICAL WORKING( UNDER 7" WHEEL) 12" TABLE WORK AREA 6" X 18" STANDARD GRINDING WHEEL 7" X 1/2" X 1-1/4" ELEVATING HAND WHEEL GRADUATIONS.0005" CROSS FEED HAND WHEEL GRADUATIONS.001" SPINDLE ... moreTYPE DIRECT DRIVE MAIN DRIVE MOTOR 1 HP 208/220/440/3/60 APPROX WEIGHT: 930 LBS. APPROX DIMENSIONS: 48 X 45" Above information is from the internet and should be checked prior to sale. Contact Us About This Machine Should you have questions. Please contact Frank Carbone(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your in
|
|
|
HARIG SUPER 612 SURFACE GRINDER,MODEL 67214HB811 ELECTRO MAGNETIC STAGE
HARIG SUPER 612 SURFACE GRINDER. MODEL 67214HB811 DESIGN B 1HP 3450/2850RPM 3PH, 6" X 12" ELECTRO MAGNETIC STAGE, 12" THROUGH, HP 1WALKER CONTROL MODEL DXM-9139, SEE PICS FOR MORE INFORMATION MCID 54137 Check out my! Any Questions Call or email or Stop In We accept Paypal and Wire Transfers Have a Blessed Day! Paul Open Monday- Friday 8-5 Paul Sullivan METRO CAD. INC. 2277 49th Avenue North Minneapolis. Minnesota 55430 USA 612-302-8056 612-302-7672 fax Used Equipment Sales New Equipment Sales KILOTECH Scales EZ Maintenance PM& Calibration Software Job Master Manufacturing Software Rigging. Moving, Storage and Archival Sold"as is. Where is" Cost for Packaging and shipping are the buyers responsibility. Shipping Please call or Email S&H and Crating Fees will apply Additional fees for outside the US shipment. ... moreNotice: Some items offered for sale are restricted from shipment to an ultimate destination outside of the United States. By U.S. Law. All sales of these"Restricted Technology" items are intended for ultimate destination only within the U.S. and it is the sole responsibility of the buyer to obtain proper licenses, where required, and if allowed, by U.S. law. Warranties While descriptions are believed to be accurate. The sellers make no warranties or guarantees, expressed or implied, as to the genuineness, authenticity of, or defect of any item(s) being sold and will not be held responsible for any advertising discrepancies or inaccuracies, including without limitation any pictures, descriptions or other information relating to the assets as contained on the website metro-cad or other communications electronic or otherwise. All items are sold on an"AS-IS" WHERE IS" AND"WITH ALL FAULTS" basis. THE SELLER MAKES NO WARRANTIES OF ANY KIND. EXPRESS OR IMPLIED AS TO THE NATURE, QUALITY, and VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR F
|
|
|
HARIG SUPER 618 SURFACE GRINDER W/ AUTOSTEP CONTROL
HARIG SUPER 618 SURFACE GRINDER with AUTOSTEP CONTROL. This unit has been set up to dice. It is under power. Autostep works.
|
|
|
harig surface grinder super 612 parts motor local pickup only auto step 3
HARIG SUPER 610 WITH AUTO STEP 3, THIS ITEM IS FOR LOCAL PICKUP ONLY AND I MAY LIST ELSEWHARE AND RESERVE THE RIGHT TO PULL THIS LISTING AT ANY TIME. IT THIS DOES NOT SELL I MAY BE WILLING TO PART IT OUT AND BE ABLE TO SHIP SEPERATE PARTS. MAKE ME AN OFFER ON A SPECIFIC PART OR PARTS OR ENTIRE MACHINE. EVERYTHING RELATED TO THIS MACHINE PICTURED IS INCLUDED. CAN DELIVER WITHIN A SMALL RADIUS. FOR A FEE AND WOULD ALSO NEED HELP UNLOADING. I COULD PROVIDE HELP BUT THAT WOULD ALSO BE AN ADDITIONAL FEE WHICH WOULD BE REQUIRED PRIOR TO MOVING AND WOULD INCLUDE A VERY LIMITED INSURANCE OF MOVING DAMAGE. IT WAS LOADED WITH A FORK LIFT AND THAT WOULD BE THE EASIEST WAY TO UNLOAD, BUT I DO NOT HAVE ONE, BUT I OR YOU MAY HAVE ACCESS TO ONE AT A NEARBY FACTORY TO TRANSFER TO YOUR VEHICLE, AGAIN FOR ADDITIONAL FEE FOR LIFT? MACHINE IS WELL USED. MAY ... moreNEED WORK ON GIBS AND/ OR WAYS FOR HIGH PRECISION GRINDING? RECOMMENDED) THIS WAS USED PRIMARILY FOR SHARPENING TOOLS SO IT WASN NOT USED IN ITS FULL RANGES AS THESE MACHINES SHOULD BE TO KEEP THEM ACCURATE, TRUE AND CLEAN. AUTO STEP FEATURE MAY OR MAY NOT BE OPERATIONAL, IT WAS NOT USED FOR A LONG TIME. THERE IS ALSO AN ELICTRICAL MAGNET CONTROL WHICH MAY OR MAY NOT BE WORKING, A QUICK ELECTRICAL TEST MAY BE ALL THAT IS NEEDED TO DETERMINE IF IT IS USABLE. I THINK IT WOULD HAVE TO BE WELL TESTED BEFORE USE TO BE SURE IT IS IN SAFE WORKING ORDER. I THINK THE MAGNET WAS SWITCHED TO ANOTHER MACHINE. THE HANDLE ON THE MANUAL MAGNET INCLUDED HAS LONG AGO COME OFF BUT I AM SURE EVEN A FAIR SKILLED TOOLMAKER COULD RE-CONNECT OR MAKE ONE. IT DOES STILL WORK. I DO HAVE THE MISSING HANDLE FOR IT AS WELL AS THE HANDLE FOR HOROZONTAL MOVEMENT OF THE BED. ALL HANDLES AND SLIDES WORKED AND MOVED FAIRLY SMOOTH. NO ROUGHNESS OR BINDING, BEFORE I GOT IT. MY METHOD OF SECURING THE MACHINE TO THE TRAILER MAY NOT HAVE BEEN THE BEST WAY SO I AM NOT SURE IF I MAY HAVE CAUSED PROBLEMS. IT WASNT MOVED FAR AND IT IS NOT OVERLY BOUND DOWN ON ANYTHING WITH MOVEMENT, HEAD IS TIGHT TO BED BUT WITHOUT ACT
|
|
|
Boyar-Schultz Harig 6/18 Super Fine Vertical Adjuster Surface Grinder 3in
Boyer Schultz/ Harig Vertical Super Fine Adjuster 6/18 3in opening
|
|
|
HARIG SUPER WEE BLOCKS MACHINIST TOOLMAKER ORIGINAL CASE LIGHTLY USED CONDITION
Very nice lightly used if at all complete set of Wee Blocks. Reads on Wee Blocks: Faith Tool Inc. Pat. No. 4.153,239 Super Wee Block Slight discoloration on larger Wee Block. Case is very nice as is foam padding. $8.00 shipping in lower 48 states. Good luck. Lightnin.
|
|
|
Harig Super 612 Surface Grinder Hand Feed Precision Nice!
Description Inventory ID: F-859. Description: Harig Super 612 Precision Surface Grinder. 3 phase. 208-220/440; 2.8/1.4A. Grinder powers on and operates. Does not have grinding wheel or nut. Dust collector does not power on. Hand feed controls move freely. Minor corrosion on stage from sitting. Otherwise in fair/good condition. Payment Please make sure you have the ability to pay for your item within 5 days of purchasing the item. If you require additional time please contact us to make special arrangements. Shipping We do our best to combine shipping and offer different ways to ship an item to save you money! When we receive your payment and begin the process of making arrangements for shipping we will contact you if you have paid too much in shipping. We will then issue you the refund for the overage. Generally we can ship items same day ... moredepending on when payment is made, but please figure at least a 1 day handling time to get the item out the door. Terms of Sale All items are sold as-is where-is with no warranties expressed or implied unless otherwise noted. If in the event you feel that there was a mistake in the listing or that you are not satisfied after purchasing your item. Please feel free to call us and we will make it right! We stand by all items we sell! About Us CGHITEK is a buyer and reseller or quality surplus industrial equipment. From semiconductor equipment to test equipment to general industrial machinery and supplies we got you covered! Contact Us In the event that you need additional questions answered please feel to contact us by clicking on"Ask A Question" below. Just below the listing. If you prefer to speak with us by phone, just send us your phone number and tell us the item you are wanting to discuss and we will get back to you as soon as possible.
|
|
|
Harig Super 612 Surface Grinder With Mag Chuck & Base
Harig surface grinder. What you see in the pictures is everything I have for it& sold as is. 110 v single phase. Runs good& strong. 6 x 12 mag chuck is strong. The oiler has a couple of broken fitting& will need to be replaced. The grinder height adjustment works good as well as the table adjustment. It has a Harig cabinet with some odd& end wheels. Local pick up only in south central KY. Contact me first before you purchase to make arrangements. I can be flexible. Otherwise it needs to be paid for& picked up within 5 days after purchase.
|
|
|
HARIG SUPER-WEE BLOCKS GRINDING INSPECTION TOOLMAKING USA
Retiring and selling my personal Harig super we block set.Part#065-100 It is quite accurate and EUC. To be honest possibly one of the small clamping vee may be missing. there is a very nice diamond stick in that hole now. Please note the clamps are steel material. We ship 50 States Priority Mail ONLY after Pay Pal payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14505df8302-0x106-
|
|
|
Harig Super 618 Industrial Surface Grinder 6" X 18"
Click to verify PesaMember Click to verifyify Buy& Sell with confidence from Consider It Sold. Inc- Colorado's largest online eBay Consignment seller. We can help you sell your items on eBay! Just give us a call at TOLL FREE at(877)264-3233 for more information! Harig Super 618 Industrial Surface Grinder 6" X 18" HARIG SUPER 618 SURFACE GRINDER. This item is in good working condition from a Colorado Machine shop. It shows signs of normal extensive machine shop usage. Max Grinding Wheel: 7" Wheel Speed: 3.400 rpm Motor: 1 HP X Axis: 19" Y Axis: 7" Z Axis: 9" 208-220/440 Volts 1.4 Amps 60/50 Hz 3 phase Overall Dimensions: 49" x 34" x 78"H Weighs approximately 1200 Lbs. Good Working Condition This unit exceeds limitations by FEDEX and UPS and must be palletized for freight shipment. Local ... morePickup is always FREE. If you do not intend to pick the item up locally. Then it will require freight shipping. The freight shipping cost for this item will vary depending on your zip code. We have included sample rate quotes to various cities above and the sample quotes do include a $50 charge to cover the cost of securing your item to a pallet to ensure safe arrival to you. Once the auction completes, Please contact us for an exact quote to your zip code. Serious bidders my feel free to contact us for a rate quote before bidding. The rates above reflect shipping to a business with a dock. If you are a business and need a lift gate there is an additional charge of $50. If you would like residential delivery with a lift gate there is an additional charge of $75. If you want to pick the item up at the USF Freight Terminal Nearest you you can save the $75 residential delivery fee. Click on Image Below for full size view! Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Click on Image to enlarge Payme
|
|
|
Harig Super 618 Surface Grinder With Autostep lll 6" x 18"
Used in great condition. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. local delivery within 50 miles of Chicago is FREE. If you have any questions please call 847-644-2004. LONGITUDINAL TRAVEL 18-3/4 CROSS FEED TRAVEL 6-3/4" VERTICAL WORKING( UNDER 7" WHEEL) 12" TABLE WORK AREA 6" X 18" STANDARD GRINDING WHEEL 7" X 1/2" X 1-1/4" ELEVATING HAND WHEEL GRADUATIONS.0005" CROSS FEED HAND WHEEL GRADUATIONS.001" SPINDLE TYPE DIRECT DRIVE MAIN DRIVE MOTOR 1 HP 208/220/440/3/60 APPROX WEIGHT: 1000 LBS. APPROX DIMENSIONS: 48 X 45" all specifications are from online and may not be exact
|
|
|
Harig Super 612 Surface Grinder- Quick Sell
Item Specs: Model: Super 612, Priced for quick sell, Magnetic Chuck, Operational, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually ... moregoes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questions but please be aware that the equipment may no longer be located within the original facility and historical information and photos may be limited. Please contact us for return details as they change from listing to listing. For more information. Please call at 860-484-4449. Or email him at bradym@globalmachinebrokers.com
|
|
|
HARIG Super 612 Grinder Machine (#2) 1 HP 3 Phase 50/60Hz RPM 3450/2850 Rise 55
ACT\Coleman Machinery Presents: USED: HARIG Super 612 Grinder Machine#2 1 HP 3 Phase 50/60Hz RPM 3450/2850 Rise 55 Location: Paramount CA. 90723 HARIG Super 612 Grinder Machine#2 1 HP 3 Phase 50/60Hz RPM 3450/2850 Rise 55 Shipping Information. Ships to: Worldwide Shipping Weight: Approx 850 lbs. Location: Paramount. CA 90723, United States Product is sold as is and no warranty is implied; UNLESS EXPLICITLY EXPRESSED BY ACT/COLEMAN MACHINERY Contact seller for details and payment instructions at(562) 602-1207. Ask for Ramiro. ACT Coleman Inc. 16200 South Garfield Avenue. Paramount Ca. 90723
|
|
|
NICE HARIG SUPER 612 HAND FEED SURFACE GRINDER WITH WALKER FINE POLE CHUCK
BEAUTIFUL RUNNING CONDITION. THE SPINDLE IS A-1. THIS IS A HARIG HAND FEED SURFACE GRINDER. MODEL SUPER 612. ITS GOT A STRONG WALKER FINE POLE 6" X 12" PERMANENT MAGNETIC CHUCK. THIS GRINDER HAS TEFLON WAYS. THE SPINDLE IS DIRECT DRIVE A-1 CONDITION 1 HP 220-440 3 PHASE WIRED 220. COMES WITH A WORK LITE. THE TOP ELEVATING SCREW COVER NEEDS REPLACING IF THE NEW OWNER NEEDS IT BUT WORKS FINE LIKE IT IS. BUYER PAYS SHIPPING OR COME PICK IT UP HERE. NEVER A CHARGE FOR LOADING. A CUSTOM SKID WILL COST AN EXTRA $150.00 FOR SAFE TRANSPORTATION. EMAIL WITH QUESTIONS. THANKS KENNY. RUMFORD SUPPLY& MACHINERY COMPANY. 263 PINE STREET. SEEKONK. MA. 02771. TEL 1-508-639-5199. SERVING THE MACHINE TOOL INDUSTRY FOR 55 YEARS
|
|
|
6" x 18", HARIG SUPER 612 SURFACE GRINDER
Welcome to retrofittocnc Inc. EBay Sales Listings. Today we are pleased to offer the following item for your consideration.You are welcome and encouraged to view items in person. We describe items to the best of our ability. We try to provide good pictures for your consideration. We are not an expert on all of our items so please ask questions before bidding or purchasing. SORRY WE WILL NOT EXCEPT PAYMENT FROM PAYPAL FOR OVER $1.000.00, IF YOU DO WE WILL SEND YOUR MONEY BACK! Specifications are as the following: STOCK#3343 MAKE: HARIG MDL: SUPER 618 LONGITUDINAL TRAVEL: 19" CROSS FEED TRAVEL: 6-3/4" VERTICAL WORKING(UNDER 7" WHEEL) 12" TABLE WORK AREA: 6" X 18" STANDARD GRINDING WHEEL: 7" X 1/2" X 1-1/4" ELEVATING HAND WHEEL GRADUATIONS: 001" SPINDLE TYPE DIRECT DRIVE MAIN DRIVE MOTOR: 1HP ... more208/220/440/3/60 APPROX. WEIGHT: 1000 LBS APPROX. DIMENSIONS: 48" X 45" SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMERS RESPONSIBILITY TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING. WE WILL NOT BE RESPONSIBLE FOR ERROR OR OMISSIONS. WE ARE ONLY SET UP TO LOAD ONTO FLAT BED TRUCKS* BUYERS PAYS ALL SHIPPING COSTS(In other words you are responsible for each shipment) Which are based on the item's size, weight and your location. We charge extra if an item needs to be put on a pallet. Out of the state purchasers shipping by common carrier are tax exempt. We collect all local taxes in CA@ 7.50% and in TX@ 8.25% unless they have the appropriate resale certificate. Goods shipping to California and Texas residents by common carrier will be charge the Correct tax for their local tax district. Any Questions? Please feel free to contact us BEFORE bidding by either email@rosa@retrofittocnc.com or by phone at 805-933-8111 or fax us at 805-525-5683 Please make check. Money order or cashier check payable to Retrofit to cnc inc. 109 N. Olive St. Santa Paula, CA 93060. Once we receive your check, we will wait 5 business days for it to clear the bank be
|
|
|
TML by Harig 6" x 12" Surface Grinder Machine Super 612 WORKS GREAT
Up for Bid is a TML by Harig 6" x 12" Surface Grinder Machine Super 612 It is an older machine and I cannot find a model number on it. But I am assuming that it is a"Super 612" I can't say for sure though, so don't mark my words on that. Please note: one of the"feet" for the stand is missing. So currently, it may wobble a bit. In the pictures, I had a piece of wood where the missing foot would be. It is in fair physical condition with a lot of signs of use. But it is in great working order and I'm only selling it for a friend because he moved and couldn't fit it at his new place. I will provide a 14-day money back guarantee. This will ship via freight. I can estimate that it will ship for around $200 to a Commercial address. But please contact me for a Freight Quote.
|
|
|
Harig Super 618 Bearing Surface Grinder
Clean Harig bearing way surface grinder with 3 axis readout and Walker magnet. Currently under power and in use with no issues. Making room for new machine. Can load at no cost if auction winner has a truck or trailer. Will not ship.
|
|
|
HARIG SUPER 618 SURFACE GRINDER SUPERFINE VERTICAL ADJUSTER
Harig 618 Surface Grinder-Super Fine Vertical Adjuster-This is only the rigging for the Super Fine Vertical Adjuster Used but in great condition please see photos. Everything in the photo is included. Please ask questions!
|
|
|
Harig Super 618 6" x 18" Hydraulic Surface Grinder, Powered Cross Feed
General Info: Stock# JG-141097 Location: Stone Mountain. GA Brand: Harig Model: 618 SN: N/A Year: N/A Specifications: Table Work Area: 6" x 18" Longitudinal Table Speed: 3 FPM- 70 FPM Longitudinal Travel: 19" Cross Feed Travel: 6-3/4" Vertical Working Height: 11-3/4"Under 7" Wheel) Grinding Wheel Maximum Capacity: 8" x 1-1/4" x 1-1/4" I.D. Elevating Handwheel Graduation: 0005" Cross Feed Handwheel Graduation: 001" Spindle Motor: 1 HP Spindle Speed: 3450 RPM Voltage: 220/440(wired 220) Volts Phases: 3 Ph Approximate Weight: 1400 LBS. Length: 42" Width: 54" Height: 80" Equipped With: Hydraulic Driven Longitudinal Table Travel. One Speed Powered Cross Feed Travel, Walker 6" x 18" Electromagnetic Chuck and one shot lube. Additional Info: Machine has been tested and ... moreis in good working condition. We are glad to show the machine under power. We ship out next day after payment has been received. Seller Contact Info: Mark Davis 404-272-1285 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
|
|
|
Harig Model Super 612 Handfeed Surface Grinder
Harig Hand Feed Surface Grinder Model Super 612 6 x 12 Magnetic Chuck Can load onto your truck at no extra charge We can assist with freight quotes within US and Mexico. Including exporting needs Please call if you have any questions Tel(956) 459-6259 See our other times for sale
|
|
|
Harig Super 612 Surface Grinder (Green)
Description Of Item: WILL NOT BE SHIPPED! MUST BE PICKED UP! UNLESS OTHER ARRANGEMENTS HAVE BEEN MADE. THIS ITEM MUST BE REMOVED FROM OUR PROPERTY NO LATER THAN 15 DAYS AFTER THE BIDDING ENDS! SELLER RESERVES THE RIGHT TO ISSUE A REFUND AND DISPOSE OF ITEM AFTER THIS TIME! Harig Super 612 Surface Grinder(Green) Runs. But likely needs some refurbishing to make it right. Unit is sold AS IS. WILL NOT BE SHIPPED! MUST BE PICKED UP! By bidding on this item. You agree to the following terms and conditions: All property listed in the Invitation to Bid is offered for sale"AS-IS" The Southeast Community College makes no warranty. Expressed or implied, as to kind, character or quality of any of the property, or its fitness for any use or purpose. Items picked up or shipped to a Nebraska address will be charged 6.5% sales tax on the final ... moreamount. DO NOT BID unless you have read. Understood and agree to all the Terms and Conditions of this sale. FAILURE to abide by these Terms and Conditions could result in fines. Penalties and/or forfeiture of sale property. Pick up by appointment only at: Southeast Community College 600 State St Milford NE 68405 Hours are 8:30 am– 3:30 pm weekdays– excluding holidays. For directions and appointment times call 402/761-8260 Additional Shipping. Payment& Pickup Instructions: Item(s) picked up by buyer or authorized agent: If you are picking up the item(s) or making your own arrangements for pickup. Full payment must be received by the College prior to removal or property. If payment has been mailed, allow 3 to 5 days for processing. Receipt of payment can be verified by calling(402)761-8260. If the buyer elects to have another person pick up property, a letter of authorization must be furnished. Feedback Policy: Feedback will be made after you receive your item and leave us feedback. Please contact us with any problems; we want all buyers to be satisfied. Please give us time to respond. Especially over weekends and holidays. Powered by The free listing tool. List you
|
|
 |