|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$400.00 Shipping Condition: Used Location: Bristol, United States WE CAN CONVERT TO SINGLE PHASE GOOD FUNCTIONING MACHINE.
Buy It Now
Condition: Used Location: Millersburg, United States Model H612. Lift Tables. Manual oiler. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving ... moremarketplace. Information and Support. Part Number 612.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Included 1 x Magnetic Chuck All Accessories for Use.
Buy It Now
Condition: Used Location: Central Falls, United States This is aSanford Model MG6x12 Compact Surface Grinder with 5x10 Brown & Sharpe Magnetic Chuck. in perfect running condition! 6x12 manual grinder. 5 x ... more10 Mag Chuck. Compact Size. They are subject to withdrawal, change and prior sale without notice.
Buy It Now
Condition: Used Location: Harrison, United States 12" Width 24" Length Okamoto ACC -12-24ST, 3X AUTO FEEDS, AUTO IDF SURFACE GRINDER, EMC, COOLANT. 12" X 24" OKAMOTO HIGH-PRECISION. HYDRAULIC SURFACE ... moreGRINDER. MACHINE WEIGHT. 3,900 LBS. HYDRAULIC CONTINUOUS..
Buy It Now
Condition: Used Location: Lebanon, United States To View under Power, Follow the Link Below. Grinding Pocket 6” x 12” x 12”. Inspect Under Power. 6” x 12” Walker Permanent Magnetic Chuck. Weight 900 ... moreLBS Approx.
Buy It Now
Condition: Used Location: Louisville, United States Digital Display For Vertical and Cross Feed Axis Position Display. Equivalent To. 00001". 0001" Or. 001", Power Rapid Wheel Positioning. Over the Wheel ... moreHydraulic Dresser with Sparkout and Dress Compensation.
Buy It Now
Condition: Used Location: Harrison, United States 6" X 12" BOYAR SCHULTZ HAND FEED SURFACE GRINDER. MODEL: 612 S/N: 9728. WITH DUST COLLECTOR IN THE BASE. - DUST COLLECTOR IN THE BASE. MADE BY "SD MACHINE ... moreTOOLS CO., LTD.". NICE CONDITION & APPEARANCE (ORIGINAL PAINT) .
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 12231350033. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, ... morestep deck, double drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
$600.00 Shipping Condition: Used Location: Bristol, United States
Buy It Now
Condition: Used Location: Holland, United States HYDRAULIC MOTOR 1-1/2 HORSEPOWER. AUTO CROSS FEED YES. ELECTRO-MAGNETIC CHUCK SIZE 12" X 24". GRINDING CAPACITY 12" X 24". TABLE SPEED (VARIABLE) 16 TO ... more82 FPM. GRINDING WHEEL SIZE 14" X 1-1/2" X 5". SPINDLE SPEED 1750 RPM.
Buy It Now
Condition: Used Location: Chatsworth, United States Make:B oyar Schultz. 1/2 HP spindle motor. 6" x 12" Magnetic chuck. Spindle Speed, Direct Drive. Standard wheel guard. Table Working Surface. Open-bed ... morefreight trucks allow the item to secured to the truck bed.
Buy It Now
Condition: Used Location: Lincolnshire, United States .0.02" - 0.8". Servo Driven Automatic Downfeed. - Automatic Continuous Feed. Fully Automatic: Surface, Bias, Plunge Grinding, Rough & Finish, Spark-Out, ... moreTable Park L-R. - Hydraulic Oil Pump Motor.
Buy It Now
$66.05 Shipping Condition: New Location: Grand Rapids, United States We ordered them and never used them.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4X7 5X10 6X12 6x6 6X18 Permanent Magnetic Chuck Fine Pole Magnetic Chuck. --Applicable to grinding machines, EDM EDM, line cutting, tapping machines, ... morebench drill and other processing. --Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is particularly evident.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and other processing. --Magnetic pole gap fine, uniform magnetic ... moreforce, small workpiece processing, the effect is particularly evident.
Buy It Now
Condition: Used Location: Brookpark, United States Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 5" W 12" L Taft Pierce No. 1 SURFACE GRINDER. ROLLER BEARING Tbl, TILT WHEELHEAD Ref# 150592 iammdna XHFSG 5" X 12" TAFT PEIRCE MODEL#1(MADE IN USA) HIGH-PRECISION" HAND FEED SURFACE GRINDER S/N: 1490 NEW: 1955* TILTING(30 DEGREES) WHEELHEAD DESIGN* WIDTH& LENGTH GROUND. 5" X 12" TABLE TO SPINDLE CENTER. 12" LONGITUDINAL TABLE TRAVEL. 13- 1/2" TABLE MOVEMENT PER REV. OF HANDWHEEL. 3.4" CROSS TRAVEL. 5- 1/2" GRINDING WHEEL CAPACITY. 7" X 1/2" X 1-1/4" CROSSFEED MOVEMENT PER REV. OF HANDWHEEL. 0.100" CROSSFEED HANDWHEEL GRAD. 0.001" CROSS FINE FEED KNOB GRAD. 0.000025" VERTICAL FEED PER REV. OF HANDWHEEL. 0.050" STD. HANDWHEEL GRAD. 0.0005" VERTICAL FINE FEED KNOB GRAD. 0.000025" APPROX. WEIGHT. 1.500 LBS. APPROX. DIMENSIONS. 61" X 45" X 66"H MACHINE FEATURES: CAST IRON. HEAVILY RIBBED CONTRUCTION W/SMALL FOOTPRINT BALL MOUNTED TABLE. ROLLER MOUNTED SADDLE& BALL TRACKED COLUMN. PLUS BALL BEARINGS THROUGHOUT, PROVIDE FOR EXTREMELY HIGH PRECISION CAPABILITY. REPLACEABLE LONGITUDINAL WAYS(VEE& FLAT WAY) CROSSFEED HAS ANTI-BACKLASH NUT ASSEMBLY SADDLE LOCK FOR CONVENIENCE IN FORM GRINDING OPERA
Buy It Now
Condition: Used Location: Lenapah, United States Have video of machine running. Can inspect under power at facility. All products are as is.
Buy It Now
Condition: Used Location: Holland, United States This is a USED Harig Super 612 manual surface grinder that has a Walker Ceramax 6"x12" permanent magnetic chuck mounted on it. Motor is 208/220/440-Volt, ... more3-phase and is 1 H.P., with RPM's of 3450/2850, depending on how it is wired.
Buy It Now
Condition: Used Location: Lenapah, United States INCLUDES TWO NEW IN THE BOX NORTON GRINDING WHEELS. 7.5 HP Spindle Motor. Hydraulic system and coolant system is all integrated into the machine. 65 Gallon ... moreHydraulic system capacity. 3 HP Hydraulic Motor.
Buy It Now
Condition: Used Location: Pomona, United States MACHINE WEIGHT: 5,500 LBS. MACHINE FEATURES COOLANT SYSTEM WITH PAPER FILTRATION. "ONE OWNER MACHINE". WHEEL SIZE: 12" x 1.5" x 5". EXTRA GRINDING WHEELS ... more& HUBS. -POWER RAPID WHEEL POSITIONING. WITH EACH GRAD.
Buy It Now
Condition: Used Location: Pomona, United States Wheel Guard. Working Surface: 6" x 12". Drive: Hand Operated. 6" x 12" Permanent Magnetic Chuck. Longitudinal Table Travel: 14". One Shot Lube. Pomona ... moreCA 91768.
Buy It Now
Condition: Used Location: Pomona, United States Table Load Capacity w/Chuck: 200 Lbs. Floor Space Required: 49” x 48” x 75”. Machine Weight: 1,800 lbs. Maximum Grinding Chuck Size: 6” x 12”. Maximum ... moreTable Travel: 15”. Walker 6" x 12" Permanent Magnetic Chuck.
Buy It Now
$67.49 Shipping Condition: Used Location: Middlebury, United States Removed From Mitsui Surface Grinder MSG-200MH 460V 60Hz 3480RPM. Size: Length: 16 in. Width: 10 in. Height: 6 in. We choose the carrier. Weight (lbs, ... moreoz): 45. Prefer to pick it up yourself?. LOCAL PICK-UP.
Buy It Now
Condition: Used Location: Warren, United States Hydraulic Longitudinal and Cross Feeds. Chuck Size 16" x 32". Coolant Tank With Paper Filtration. Main Motor 5 HP. Grinding Wheel Dia. Spindle (Horz/Vert) ... morehorizontal.
Buy It Now
Condition: Used Location: Pomona, United States ARTER Model A 12 Rotary Surface Grinder. machine weight 3500 lbs. degree of tilting table +/- 12 degrees. Financing Available / Se Habla Español.
Buy It Now
Condition: Used Location: Rochester, United States Make: Harig. Type: Surface Grinder. Model: 612. Includes installed Walker Ceramax 6" x 12" Magnetic Chuck. Motor HP: 1.5. Size: 6" x 12". Electric: 208-230/460V, ... more60/50 Hz, 3 Phase.
Buy It Now
$13.06 Shipping Condition: Used Location: Millstadt, United States Model - part number 3510A. Boyer Schultz Surface Grinder Handwheel. Specifications: 6" x 12" six twelve deluxe x handwheel. Machine it fits - bore is ... more0.582". Width - 11". Depth - 11". Height - 11". Approximate Weight - 8 lbs.
Buy It Now
Condition: Used Location: Hugo, United States Harig Super 612 Surface Grinder General Info: Stock# GS-131063 Condition: Used. Good Tested: Yes. Working Condition Brand: Harig Model: Super 612 Shipping ... moreWeight: 900 Lbs. Shipping Dimensions: 48" L x 40" W x 88" H Location: Stone Mountain. GA Specifications: Table Travel 15" Cross Travel 6.5" Head Height Adjustment 9" Motor 1HP/ 208-220/440V(Wired 220) 3 Ph. Additional Info: Currently. There is no wire attached to the handle to move the cross travel on the surface grinder so the cross travel does not work. Everything else on unit is good. The nut to lock down grinding wheel is missing. Manual and other miscellaneous accessories included. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1308-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
Buy It Now
Condition: New Location: Taiwan Standard Accessories (GSG). Precision Surface Grinder (Handfeed). Hand Feed Surface Grinders. Vertical feed handwheel per gra. Cross feed handwheel per ... moregra. Table drive slides on steel ball slide rails, super quick motion.
Buy It Now
Condition: Used Location: Coffeyville, United States 815 SURFACE GRINDER. 8" X 15" HAND FEED. 42" X 39" X 80" H. LONGITUDINAL TRAVEL 16". VERTICAL TRAVEL UNDER 12" WHEEL 12". GRINDING WHEEL SIZE 12" X 1" ... moreX 3". APPROXIMATE WEIGHT: 1100 LBS. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
Buy It Now
Condition: Used Location: Saint Charles, United States Working surface of table 6” x 13 1/2”. Excellent Condition. Approximate weight 1,500 lbs. Pictures are of the actual item for sale. Spindle speed 3400 ... morerpm. Grinding wheel capacity 8” x 3/4” x 1 1/4”.
Buy It Now
Condition: Used Location: Brookpark, United States QUOTE# 26964. 16" x 40" THOMPSON"C" HYDRAULIC-FEED HORIZONTAL-SPINDLE SURFACE GRINDER Serial No C514055. Model C, Series"C" ... moreEQUIPPED WITH: 16" x 40" Electro-Magnetic Chuck w/Neutrol Power Head Elevation Automatic Lubrication System Coolant System(Tank& Pump) CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 16" x 40" Grinding Width Capacity. Maximum. 16" Grinding Length Capacity. Maximum. 40" Height Under 20" Grinding Wheel. 16" Grinding Wheel Diameter. Standard. 20" Grinding Wheel Width. Standard. 3" Grinding Wheel Hole Diameter. 8" Grinding Wheel Surface-Feet-Minute. 6000 SFM. Table Longitudinal Feeds. Range. 10 to 100 FPM. Spindle Cross In-Feeds. Range. 04 to 1.25 IPR. Power Rapid Table Traverse. 240 IPM. Power Rapid Vertical Traverse. 15 IPM. Grinding Wheel Spindle Motor. 30 HP. Hydraulic System Motor. 5 HP/1170 RPM. Electrical System. 220-440/3/60. Floor Space Required. L x D. 10'9" x 6'3" Weight. Approximately. 12500 LBS. PRICE: F.O.B. OUR WAREHOUSE. $7.950.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Buy It Now
Condition: Used Location: Brookpark, United States Brown& Sharpe Model 510 Hand Operated Micromaster Surface Grinder-Inv.6999 You are bidding on a Brown& Sharpe Model 510 Hand Operated Micromaster ... moreSurface Grinder Inv.6999 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 523-510-2166 208V/3PH/60HZ Longitudinal table travel: 11" C
Buy It Now
Condition: Used Location: Harrison, United States 12" Width 24" Length Okamoto ACC-1224DX, 1996, 3X AUTO FEEDS, AUTO IDF SURFACE GRINDER, EMC, COOLANT. 12" X 24" OKAMOTO. 3-AXIS AUTOMATIC FEEDS SURFACE ... moreGRINDER. MODEL: ACC-1224-DX S/N: 63658 MFG: 1996.
Buy It Now
$52.18 Shipping Condition: Used Location: Elgin, United States Mitsui 250H-2AH Surface Grinder with Walker Electro-Magnetic Chuck 8" X 18" MITSUI"SUPER-PRECISION- MADE IN JAPAN" MODEL: MSG250H-2AH ... moreWORKING SURFACE OF TABLE. 8" X 19" MAXIMUM SURFACE GROUND. 9-1/2" X 20" MAXIMUM DISTANCE BETWEEN TABLE SURFACE AND SPINDLE CENTER. 22-1/2" RANGE: LONGITUDINAL. 20" CROSS(AUTOMATIC) 9-1/2" CROSS(MANUAL) 10" VERTICAL. 16" INF. VARIABLE LONGITUDINAL FEEDS. 5- 68 FPM AUTO CROSS FEED TO TABLE PER STROKE. 0.02" 0.05" IPM AUTO VERT. FEED INCREMENTS. TEN STEPS. 0001" 001" RAPID CROSS FEED RATE. 2- 17 IPM ELEVATING HANDWHEEL GRADUATIONS. 0.0001" CROSS FEED HANDWHEEL GRADUATION. 0.001" CROSS FEED VERNIER. 0.0001" OPTIONAL FINE FEED KNOB. GRADUATION. 0.00005" APPROX. MACHINE WEIGHT. 3.490 LBS These specifications are preliminary and are subject to verification This item is being sold"as is" All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Metric Services with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of Metric Services, be added to the quoted purchase price and invoiced by Metric Services to Purchaser. The failure of Metric Services to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by Metric Servic
Buy It Now
Condition: Used Location: Pomona, United States Chuck Size: 6" x 12". Longitudinal Table Travel: 13". 6" x 12" Walker Permanent Magnetic Chuck. Main Motor: 1 HP. Height Under Wheel: 11.5". Pomona CA ... more91768. Cross Saddle Travel: 7".
Buy It Now
Condition: Used Location: Rochester, United States Make: Harig. Type: Surface Grinder. Model: Super 612. Includes installed Walker Ceramax 6" x 12" Magnetic Chuck. Size: 6" x 12". make Supersized seem ... moresmall.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Packages: 1 x Magnetic Chuck[150*450mm(6”x18”)/150 * 150mm(6”x6”)/150 * 300mm(6”x12”)/100 * 175mm(4”x7”)/125*250mm(5”x10”)].
Buy It Now
Condition: Used Location: Stone Mountain, United States For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. 42" ... moreMATTISON, No. 24-42, 22" Wheel, 75 HP, External Coolant, Nice, Low Price Our stock number: 21947. MODEL: 24-42 SERIAL NUMBER: 24-413 GENERAL SPECIFICATIONS Magnetic Chuck and Table Diameter: 42" Maximum Swing Inside Guards: 48" Wheel Diameter. Segmental Type: 22" Work Height: 24" Table Speeds: 8. 11, 18, 32 RPM Wheel-Head Downfeed: 005 to.165 IPM EQUIPPED WITH 75 HP Wheel Motor External Coolant System: Hydromation Model HV-4. S/N: 4-4811 Pedestal Mounted Controls Electro-Matic Variable Hold Chuck Control Trabon Lubrication Swing-Arm Wheel Dresser Load Meter Approximate Weight: 22.000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not
Buy It Now
Condition: Used Location: Louisville, United States 6" X 12" HARIG AUTO STEP SURFACE GRINDER. 6" x 12" Walker Electromagnetic Chuck. Vertical Working Height Under 8" Wheel Over 2-5/8" High Chuck: 8-3/4". ... moreCross Feed Travel: 7" Maximum. Auto Step Down Feed Rate Settings.0001" to. 0099" Either Single End or.
Buy It Now
Condition: Used Location: Louisville, United States Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 6" W 18" L Brown& Sharpe 618 Micromaster SURFACE GRINDER. 0001" CROSS& VERT. Ref# 140572 iammdna XHFSG 6" x 18" BROWN& SHARPE#618 MICROMASTER"SERIES II" PRECISION HAND FEED SURFACE GRINDER S/N: 523-6185-7493 NEW: 1980 WIDTH& LENGTH GROUND. 6" X 18" HEIGHT OF WORK GROUND W/STD. 7" WHEEL. 15-1/2" MAXIMUM LONGITUDINAL TRAVEL. 22" MAXIMUM CROSS TRAVEL. 7" HANDWHEEL. HAS ADJUSTABLE DIAL GRADUATED TO READ TO. 0.0002" FINE-FEED KNOB. ADJACENT TO THE HANDWHEEL. 0.0001" VERTICAL TRAVEL OF SPINDLE. 15-3/4" HANDWHEEL HAS ADJUSTABLE DIAL GRADUATED TO READ TO. 0.0002" FINE-FEED KNOB. ADJACENT TO THE HANDWHEEL IS GRADUATED TO READ TO. 0.0001" APPROXIMATE MACHINE WEIGHT. 2.500 LBS APPROXIMATE FLOOR SPACE. 56"L X 62"D X 68" EQUIPPED WITH: SONY" MODEL#LF-200 2-AXIS DIGITAL READOUT DISPLAY 6" x 18" KANETSU" FINE-DIVISION PERMANENT MAGNETIC CHUCK 1.5 H.P. BROWN& SHARPE SUPER-PRECISION DIRECT DRIVE SUPER-PRECISION SPINDLE DRIVE FINE FEED KNOBS FOR VERTICAL& CROSS FEED HANDWHEELS(0001" GRADUATION) DUAL INCH/METRIC HANDWHEELS FOR CROSS& VERTICAL AXES PRESENTLY WIRED FOR 3/60/460 VOLTS/5 AMPS SPECIAL NOTE: THE MACHINE WAS USED IN AN APPRENTICE TRAINING SHOP OF A FORTUNE 500 COMPANY. THIS MACHINE HAS LOW HOUR
Buy It Now
Condition: Used Location: Louisville, United States VERTICAL RAPID FEED. 16 FPM. 0.00005" to 0.0015". TABLE CAPACITY. 20" x 36". CROSS FEED CONTINUOUS. 8 to 40 FPM. MODEL. ACC-2036DX. GRINDING WHEEL SIZE. ... more12" OD x 2"W x 5" bore.
Buy It Now
Condition: Used Location: Stone Mountain, United States (Scotchman Grit GNHD6DE 6" Tube and Pipe Belt Grinder / Notcher. Cause of Action?). Blohm HFS-512 48 x 20 Hydraulic Surface Grinder. Mattison Model 24 ... more42" Rotary Surface Grinder. 3D Printers Air Compressors Air Cooling & Heating Equip.
Buy It Now
Condition: Used Location: Cedarburg, United States Boyar-Schultz HR612 Roller Way Manual Surface Grinder with Optidress Optical Wheel Dresser. Model #: Challenger HR-612. 6" x 12" Walker Ceramax Fine-Lined ... morePermanent Magnet Chuck. Cabinet Base w/Door for storage.
Buy It Now
Condition: Used Location: Pomona, United States Wheel Guard with Suction Port. Spindle Center to Table: 18". Table Size: 6" x 12". Wheel Size: 8" x 1" x 1-1/4". Pomona CA 91768. Sony 2-Axis Digital ... moreRead Out.
Buy It Now
Condition: Used Location: Harrison, United States Tbl & CROSSFEED, POWER ELEV. SURFACE GRINDER, 12" W. TABLE & CROSSFEED, POWER ELEV. SURFACE GRINDER, 12" WHEEL, O.S. WHEELHEAD CROSSFEED RAPID TRAVERSE. ... more20' FPM. AUTOMATIC POWER CROSSFEED. MODEL: #2F S/N: NEW: 1980.
Buy It Now
Condition: Used Location: Hugo, United States Arter A3-12 Rotary Surface Grinder - 12". 12" Electro magnetic chuck. Also machines can be inspected under power here at our facility in Hugo, MN 55038. ... moreWe'll do our best to get you the lowest rate possible.
Buy It Now
Condition: Used Location: Chatsworth, United States Okamoto OMA-350 6” x 12” magnetic chuck. With built in dust collector. The machine operates nicely. Automatically lubricates nicely. Lightly used you ... morecan still see the flacking on the ways. Comes with a nice 4” travel dial for the spindle. Contact for shipping quote.
Buy It Now
Condition: Used Location: Harrison, United States 6" Width 12" Length CONCORD H612, NEW 1990 SURFACE GRINDER, PMC. 6" X 12" CONCORD HAND FEED SURFACE GRINDER. MACHINE WEIGHT. 975 LBS. WORKING SURFACE ... moreOF TABLE.. Machine Location:HARRISON, NJ.
Buy It Now
Condition: Used Location: Ravenna, United States This is a great working HARIG 6x12 Surface grinder with readout. It is as it was on the machine shop floor. Little use. Very Tight. I can load for free ... moreon your truck or carrier. Please email with any questions. Thanks in advance, Troy
Buy It Now
Condition: Used Location: Dayton, United States Harig Model 612 6" x 12" Hand Feed Surface Grinder With Digital Readout-Inv#8212-420 You are bidding on a Harig Model 612 6" x 12" ... moreHand Feed Surface Grinder With Digital Readout-Inv#8212-420 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider our machinery and/ or equipment. We have done our best to provide as much information and as many details as possible so you will able to consider with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We are always willing and happy to answer any and every question a customer might have to the best of our ability, so don't hesitate to ask. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 15328 Built 1984 Voltage: 220. 3 phase, 60 cycle Longitudinal travel: 12-1/2" Cross feed travel: 7-1/4" Vertical working height: 12-1/2" Plat
Buy It Now
Condition: Used Location: Cincinnati, United States 12" x 24" SUPERTEC 3-AXIS AUTOMATIC SADDLE-TYPE. HYDRAULIC-FEED HORIZONTAL-SPINDLE SURFACE GRINDER. Spindle Horsepower 5 HP. Hydraulic Motor Horsepower ... more2 HP. Rapid Traverse, Vertical 9.4 IPM. Automatic Lubrication System.
Buy It Now
Condition: Used Location: Detroit, United States 32-60 BLANCHARD ROTARY SURFACE GRINDER. Feed : Vertical down feed by hand or power. Power feed variable from. 004" to. 080" per minute. 12" Vertical range. ... moreFloor Space : 186" x 84" x 134" maximum height, plus electric panel 63’ wide x 78" high x 21" deep.
Buy It Now
Condition: Used Location: Dayton, United States Automatic Crossfeed of Saddle – 0” to 0.35”. Working Table Surface – 10.2” x 29.5”. Max Grinding Surface – 12” x 30”. Net Weight, Approx - 4300 Lbs. Equipped ... morewith Vertical Handwheel (1 rev) - 0.1”.
Buy It Now
$20.10 Shipping Condition: New Location: Merritt Island, United States NEW OLD STOCK WHITE SURFACE GRINDING GRINDER WHEEL 12x1x5 60I A/O.
Buy It Now
Condition: Used Location: Clare, United States Harig manual surface grinder. Specifications: Model: Super 612 Chuck Size: 6" x 12" Bed Way: Roller Bearing Magnetic Chuck: Manual Phase: 3 HP: 1 Volts: ... more208-220/440 RPM: 3450 Condition: Good working SHIPPING OPTIONS: Standard Truck Freight (4 to 8 Days delivery time): Contact for Quote Local Pickup: FREE International Shipping: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website!.
Buy It Now
Condition: Used Location: Roanoke, United States When you buy from Select Machine you are not only buying from a reputable dealer but also a sales and service staff with well over two hundred years of ... morecombined experience. We want you to be happy and we also want to help you in any way possible.
Buy It Now
Free Shipping Condition: New Location: United States Wide application ---- This permanent magnetic chucks can be used for processing various magnetic conduction workpieces. For surface grinder, tool grinder, ... moreEDM, and other applications. Thin and lightweight workpiece are ideally suitable because of fine-pitched magnetic poles.
Buy It Now
Condition: Used Location: Los Angeles, United States
|
|
|
|
6" x 12" Sharp Ball Roller Hand Feed Surface Grinder. Model SG 6614, 1989
6" x 12" Sharp Ball Roller Hand Feed Surface Grinder. Model SG 6614. S/N 78C 385, New 1989 Machine Specs: Grinding Pocket 6" x 14" Spindle to Table 15" Grinding Wheel 8" HP 1.5 HP 220 Volt 3 Phase. Graduations Cross.001. Down.0001. Weight 1250 LBS Equipped With: 6" x 12" walker Permant Magnetic Chuck. Auto Lube. Ball Roller Table. Full Cast machine. Please Note we have the wheel Guard Cover Very Good Condition Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
HARIG 612 SURFACE GRINDER 6" X 12" --- GREAT SHAPE
HARIG 612 SURFACE GRINDER 6" X 12" HARIG 612 SURFACE GRINDER 6" X 12" SERIAL 16021. NO MAGNETIC CHUCK. 230/460V 3 PHASE THIS GRINDER IS VERY GOOD CONDITION. COMES WITH ALL SEEN IN THE PICTURES. PLEASE CALL OR EMAIL WITH ANY QUESTIONS 718-698-8400. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR ... morePURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
6 X 12 CHEVILAIR SURFACE GRINDER,MODEL FSG-612,ROLLER BEARING TABLE,MAGNET CHUCK
This is a 6 X 12 CHEVILAR SURFACE GRINDER WITH MAGNETIC CHUCK AND ROLLER BEARING TABLE IN GOOD WORKING CONDITION. TABLE IS VERY SMOOTH. IT IS WIRED 230 3 PHASE PHASE AND EVERYTHING IS WORKING THE WAY IT SHOULD. 40 X 36 X 72 AND 1300 LBS. Any questions e-mail or call Gerry@ 727-547-0616. Please include item number in all correspondence. CALL TINA FOR SHIPPING QUOTES& CREDIT CARD PAYMENTS No charge for packing. Skidding or loading. Buyer Pays Shipping. We combine multiple items for shipping when possible. Indicate if delivery is to a business or a residence. Buyers PLEASE include phone number in case we have a question. On Jun-02-12 at 11:16:05 PDT. Seller added the following information:
|
|
|
Okamoto Acc-12" x 24" Z Auto Downfeed Surface Grinder
Okamoto ACC 24" x 24"Z Auto Down feed Surface Grinder Specifications: Grinding Capacity 12" x 24" x 13.7" under 13.7" wheel) Max Table Travel 29.5" Max Cross Travel 13.6" Longitudinal Travel Rates 1.0 to 100 FPM Cross Travel Increments 0.5 to 2.0mm Auto Down feed per table stroke 0.002 to 0.03mm Auto Down feed per saddle reversal 0.002 to 0.03mm Grinding Wheel 12" x 5" x 1.5" Wheel Speed 1800 rpm's Grinding Wheel Motor 5 hp Spark out plunge Electrics- 220/440/360 AC set for 440V Floor Space 103" x 74" x 73" high Serial number 7816 Equipped with: 1. Magnetic Chuck 12" x 24" with Neutrofier II control 2. Coolant 3. Work Light 4. Hydraulics 5. Rapid Travel 6. Dust Suction 7. 230/460V 3 ph approx. year of mfg. 1988 Machine available for inspection under power ... moreby appointment ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3601 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST shipping dimensions: 8' x 5' x 7' approx. 6.000 lbs
|
|
|
ENCO 6" x 12" Bench Surface Grinder 3/4 Hp 115 Volts 3450 RPM
ENCO 6" x 12" Bench Surface Grinder. 3/4 Hp/ 115 Volts 3450 RPM Spindle Speed. 12-5/8" Longitudinal Travel. 7" Cross Feed Travel. 3.5" 11" Spindle to wheel min/max. 7" x 1/2" x 1-1/4" Grinding Wheel. Model# 619-2879. MSRP New: $2900. This is a USED item in good working condition. Inspected and tested. All of the functions appear to operate fine. Missing a handle knob for the cross feed and missing 2 of the 3 handles for the longitudinal feed. Has some minor paint scuffs and scratches. Has moderate signs of use. Please refer to our video. This Item Will Ship LTL Freight or Local Pickup Is Welcome. Our Buyers know we get FANTASTIC Freight rates and that keeps them coming back. We cannot obtain any freight rates for prospective buyers. But we are happy to extend our shipping discounts to our customers ... moreafter the sale. Also Please note if you set up your own freight, you will need to have the carrier or yourself send us the completed BOL prior to pickup. Thank you. Shipping Weight: 575 Lbs. Shipping Pallet Dimensions: 42" L x 40" W x 36" H Our address is: INDUSTRY RECYCLES. 1200 Ogden Rd. Unit#4. Venice. Fl. 34285. NB/ 051613/ P25A/ 44245. InkFrog Analytics.
|
|
|
BROWN & SHARPE 612 SURFACE GRINDER WITH 6" X 12" MAGNETIC CHUCK AND BIJUR PUMP
SquareTrade © AP6.0 BROWN& SHARPE 612 SURFACE GRINDER WITH 6" X 12" MAGNETIC CHUCK AND BIJUR PUMP Prev Stop Play Next You are bidding on a Brown& Sharpe Surface Grinder. Model: 612. This is a very nice grinder in excellent condition and it is fully guaranteed. 6" X 12" Magnetic Chuck 3 Phase. 220 Volts, 60 Hz Bijur Lubrication Pump We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
|
|
|
ELB 12" X 20" FULLY AUTOMATIC SURFACE GRINDER
ELB 12" X 20" FULLY AUTOMATIC SURFACE GRINDER. MODEL SW6VAIZ SPECIFICATIONS TABLE WORKING AREA- 12" X 20" X TRAVEL- 23.62" Y TRAVEL- 13.78" MAX. HEIGHT OF WORK PIECE- 18" GRINDING-SPINDLE-SLIDE(VERTICAL MOVEMENT)18" HORIZONTAL MOVEMENT)12.8" SLEWABILITY)1 DEGREE TABLE TO SPINDLE CENTER LINE- 23.6" SPINDLE MOTOR- 8/9.5 HP SPEED(2) 1730/3470 RPM GRINDING WHEEL- 2" X 12" WHEEL BORE- 5" TABLE FEED RATE- 3-98 FPM WEIGHT- 5000 LBS EQUIPPED WITH-NEUTROFIER MAGNETIC CHUCK-COOLANT SYSTEM FEATURES
|
|
|
Harig Model 612 6" x 12" Hand Feed Surface Grinder With Digital Readout
Harig Model 612 6" x 12" Hand Feed Surface Grinder With Digital Readout-Inv#8212-420 You are bidding on a Harig Model 612 6" x 12" Hand Feed Surface Grinder With Digital Readout-Inv#8212-420 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider our machinery and/ or equipment. We have done our best to provide as much information and as many details as possible so you will able to consider with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery ... moreand equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We are always willing and happy to answer any and every question a customer might have to the best of our ability, so don't hesitate to ask. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 15328 Built 1984 Voltage: 220. 3 phase, 60 cycle Longitudinal travel: 12-1/2" Cross feed travel: 7-1/4" Vertical working height: 12-1/2" Plat
|
|
|
No. 1 TAFT PIERCE 5" x 12" Hand Feed Surface Grinder '60
Preowned 5" x 12" TAFT PIERCE Hand Feed Surface Grinder. Model: No. 1, S/N 1856(New 1960) Overall size of table Working surface of table Range: longtiudinal cross vertical Size of grinding wheel Cross feed handwheel graduated to Wheelhead handwheel graduated to 8" x 33-1/4" 5" x 12" 13-1/2" 5-1/2" 12" 7" diameter x 1/2" width x 1-1/4" bore.001" 0005" Equipped With. Hardened and ground steel ways with steel balls for table. Saddle and column feeds ACU-RITE II two-axis digital readout(0.0001" resolution) ALLEN BRADLEY adjustable frequency AC motor drive with Forward/Reverse directional control and rheastat for infinitely variable control of spindle speed(0 to 3.600 R.P.M. 5" x 12" electromagnetic chuck with O.S. Walker control Fine feeds graduated to 0.000025" ... moreadjacent to vertical and cross feed handwheels Chrome plated slip rings on cross feed and vertical feed handwheels Leveling pads Manually operated BIJUR one-shot lubrication system Safety guard and lighting panel 1 H.P. direct drive spindle motor and electrical controls Machine is wired solely for 440 volt(high voltage only) operation. Approximate Weight: 1.500 Lbs. Approximate Dimensions: 54" L-R x 45" F-B x 60" H, Condition: Very Good, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
6" X 12" HARIG "SUPER" HAND-FEED HORIZONTAL SPINDLE SURFACE GRINDER - #25833
QUOTE# 25833. 6" x 12" HARIG"SUPER" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER New 1979. Serial No 11807, Model 612, Series"SUPER" EQUIPPED WITH: 6" x 12" Walker Electro-Magnetic Chuck CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 6" x 12" Grinding Width Capacity. Maximum. 6" Grinding Length Capacity. Maximum. 12" Height Under 7" Grinding Wheel. 12" Table Longitudinal Travel. 12.75" Table Cross Travel. 6.75" Grinding Wheel Diameter. Standard. 8" Grinding Wheel Width. Standard. 1.25" Elevating Handwheel Graduations. 0005" Crossfeed Handwheel Graduations. 001" Grinding Wheel Spindle Motor. 1 HP/3450 RPM Electrical System. 208-220-440/3/60 Weight. Approximately. 1000 LBS CONDITION: Appears to be in Very Good Condition. PRICE: F.O.B. ... moreOUR WAREHOUSE. $1.950.00. All machines/equipment subject to prior sale.
|
|
|
Harig 6-12 surface grinder, chuck, new motor, extremely low hours, oiling works
Harig 6-12 surface grinder with extremely low hours and a new motor. This grinder has essentially been unused for about 20 years. Started the shop 15 years ago and this grinder had a cutoff wheel on it for a couple of years. Then was moved out and replaced with a Gardener 6-18 grinder with roller ways on both axes. Really a cadillc. Before that. It was owned by one of my customers who never even hooked it up. Teflon ways are in great condition. The automatic oiler works like it is supposed to Sale will include a Walker 6-12 manual magnetic chuck. Pics available if you need them Sadly. I have no way of loading this, but a low cost rigger is available in the area. No international bidders
|
|
|
#D-12 SUNDSTRAND 13" Ram-Type Horizontal Spindle Rotary Surface Grinder '67
Preowned 13" SUNDSTRAND Ram-Type Horizontal Spindle Rotary Surface Grinder. Model: D-12 S/N: 8247(New 1967) Magnetic chuck-nominal diameter Magnetic chuck-actual face diameter Swing-max. in water pan Wheelhead slide travel. Max. Wheel size. Standard Angular tilt-convex Angular tilt-concave Chuck speed 12" 13" 24" 10" 16" diameter x 2" face 10 degrees 10 degrees 60-250 R.P.M. Equipped With Hydraulically actuated feed of ram slide Mechanically actuated feed of table 13" Diameter electro-magnetic chuck with Neutrofier controls Mechanically actuated U.S. Varidrive to 2 H.P. table feed motor 2 H.P. external hydraulic pump motor and tank 10 H.P. wheelhead drive motor TRABON lubrication system External coolant pump and tank Machine is wired for 3/60/480 volt operation. Approximate Weight: 7.500 Lbs. Approximate ... moreDimensions(Machine Only) 96" F-B x 51" L-R x 68" High, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY) 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ef1a767a2-0xf7-
|
|
|
TAFT-PEIRCE MANUAL SURFACE GRINDER 5" X 12" CHUCK
TAFT-PEIRCE MANUAL SURFACE GRINDER. 5" X 12" CHUCK. $3.400. IN WORKING CONDITION. BUYER PICK-UP ONLY.
|
|
|
Yuasa 550-001 12" Radius & Angle Surface Grinder Dresser
Yuasa 550-001 12" Radius& Angle Surface Grinder Dresser Used but in perfect working condition Please email me with any questions. Posted with
|
|
|
HARIG MODEL 612 SURFACE GRINDER WITH 6" X 12" MAGNETIC CHUCK MODEL HR-612C
ONE PREOWNED 6" X12" HARIG SURFACE GRINDER MODEL 612 PLATEN WORKING AREA: 6" FB X 12" LR LONGITUDINAL TRAVEL; 12.75" CROSSFEED TRAVEL: 6.75" VERTICAL WORK HEIGHT: 12" UNDER 7" WHEEL) GRINDING WHEEL: 8" X 1.25" X 1.25" BORE ELEV. HANDWHEELGRADUATIONS: 0005" CROSSFEED HANDWHEELGRADUATIONS: 001" SPINDLE MOTOR: 1.5HP. 3425/2800 RPM, 208-230/460V-3 APPROX DIMENSIONS: 3' LR X 3.5' FB X 6' H APPROX WEIGHT: 950LBS EQUIPPED WITH: MAGNA LOCK MAGNETIC CHUCK MODEL HR-612C CONDITION: VERYGOOD AS IS. NO RETURNS. FOB YOUR TRUCK.COLUMBIA, TN. MACHINE#4506
|
|
|
Harig 6" x 12" Hand Feed Surface Grinder - 1984
Harig 6" x 12" Hand Feed Surface Grinder- INV#8212- NEW 1984 You are bidding on a Harig 6" x 12" Hand Feed Surface Grinder- 1984- INV#8212-420 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken direct ... morefrom service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: Item#8212-420 Model#612 Serial number: 15328 Buil;t: 1984 Operating voltage: 220. 3 p
|
|
|
Gallmeyer & Livingston Surface Grinder 12" x 28" No. 70
SquareTrade © AP6.0 Gallmeyer& Livingston Surface Grinder 12" x 28" No. 70 12" x 28" Swing 220/440v 3PH We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an orde
|
|
|
5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder. Model No 1
5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder. Model No 1 Grinding Pocket 5" x 12" Table To Spindle Center 12" 7" x 1/2" x 1-1/4" Grinding Wheel. Equipped With" 6" x 12" Walker Chuck. Model no 54 Torit Dust Collector- 1/4 HP. Dresser. Wrench. 2) Wheel Hubs. Runs Well Inspect Under Power in Our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133
|
|
|
6" x 12" KO Lee Hand Feed Surface Grinder, Model S 714
6" x 12" KO Lee Hand Feed Surface Grinder. Model S 714 S/N 20612 Machine Specs: Table Size 6" x 12" Travels Long 14" Cross 7" Vertical 12" Wheel Size 8" x 3/4" x 1-1/4" Motor 1 HP. Equipped With 6" x 12" Walker Cermax Chuck. Cast Base. One Shot Lube. Work Light. Dresser and Wrench. Good Running Machine Inspect Under Power in Our Branchburg NJ warehouse Questions Call dave@ 908-399-8133
|
|
|
6" X 12" BROWN & SHARPE "VALUEMASTER" HORIZONTAL SURFACE GRINDER - #25829
QUOTE#25829 6" x 12" BROWN& SHARPE"VALUEMASTER" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER Serial No 523-612-3657. Model"Valuemaster" EQUIPPED WITH: Fine Cross Feed Knob Fine Vertical Feed Knob Automatic Lubrication System CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 6" x 12" Grinding Width Capacity. Maximum. 6" Grinding Length Capacity. Maximum. 12" Height Table to Spindle Center. Maximum. 16" Height Table to Spindle Center. Minimum. 3.5" Work Height With 7" Wheel. Maximum. 12.5" Work Height With 8" Wheel. Maximum. 12" Table Longitudinal. Manual. 14" Vertical Feed Per Rev of Hand Wheel. 05" Vertical Graduations Of Hand Wheel. 001" Cross Feed Per Rev of Hand Wheel. 1" Cross Graduations Of Hand Wheel. 001" Grinding Wheel ... moreDiameter. Standard. 8" Grinding Wheel Width. Standard. 0.5" Grinding Wheel Hole Diameter. 1.25" Grinding Spindle Speed. 3600 RPM Weight. Approximately. 1650 LBS NOTE: This Machine Does Not Have A Spindle Or Chuck. PRICE: F.O.B. OUR WAREHOUSE. $1.450.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
|
|
|
12" x 48" THOMPSON "C" HYDRAULIC-FEED HORIZ SPINDLE SURFACE GRINDER - #18655
QUOTE#18655 12" x 48" THOMPSON HYDRAULIC-FEED HORIZONTAL-SPINDLE SURFACE GRINDER New 1951. Serial No 4C514021, Model C, EQUIPPED WITH: Power Head Elevation CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 12" x 48" Grinding Width Capacity. Maximum. 12" Grinding Length Capacity. Maximum. 48" Table Longitudinal Travel. 56" Grinding Wheel Hole Diameter. 8" Grinding Wheel Surface-Feet-Minute. 6000 SFM Table Longitudinal Feeds. Range. 10 to 100 FPM Power Down Feeds. Range. 00025 to.004 IPR Power Rapid Table Traverse. 240 IPM Power Rapid Vertical Traverse. 15 IPM Hydraulic System Motor. 5 HP/1175 RPM Motor. Horsepower. 15 HP Electrical System. 220-440/3/60 Floor Space Required. L x D. 13'3" x 7'4" Overall Height. 8'7" Weight. Approximately. 17300 LBS CONDITION: As Taken Directly ... morefrom Government Stand-By Storage. PRICE: F.O.B. OUR WAREHOUSE. $4.950.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
|
|
|
12" x 26" ACER "SUPRA-1428AHD" HYDRAULIC HORIZONTAL SURFACE GRINDER - #26544
QUOTE#26544 12" x 26" ACER HYDRAULIC-FEED HORIZONTAL-SPINDLE SURFACE GRINDER New 1997. Serial No 97060533, Model SUPRA-1428AHD, EQUIPPED WITH: 12" X 24" Electro-Magnetic Chuck Incremental Power Down Feed Coolant System(Tank& Pump) CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 12" x 26" Grinding Width Capacity. Maximum. 14" Grinding Length Capacity. Maximum. 28" Height Spindle Center to Table. Maximum 28-5/16" Table Longitudinal. Power. 28" Table Cross Travel. 13-3/4" Grinding Wheel Diameter. Standard. 14" Grinding Wheel Width. Standard. 2" Grinding Wheel Hole Diameter. 5" Grinding Spindle Speed. 1750 RPM Table Longitudinal Feeds. Range. 16 to 80 FPM Spindle Auto Downfeed. Range. 00005 to.002 IPR Spindle Horsepower. 10 HP Electrical Requirements. 220/440/3/60 ... moreFloor Space Required. 110" x 78" x 81" Weight. Approximately. 6525 LBS PRICE: F.O.B. OUR WAREHOUSE. $8.950.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
|
|
|
6" x 12" BROWN & SHARPE "VALUEMASTER" HORIZONTAL SURFACE GRINDER - #25815
QUOTE#25815 6" x 12" BROWN& SHARPE"VALUEMASTER" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER Serial No 523-612-8647. Model"Valuemaster" EQUIPPED WITH: Teledyne Gurley"Pathfinder 1000" Digital Readouts Fine Cross Feed Knob Fine Vertical Feed Knob Automatic Lubrication System CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 6" x 12" Grinding Width Capacity. Maximum. 6" Grinding Length Capacity. Maximum. 12" Height Table to Spindle Center. Maximum. 16" Height Table to Spindle Center. Minimum. 3.5" Work Height With 7" Wheel. Maximum. 12.5" Work Height With 8" Wheel. Maximum. 12" Table Longitudinal. Manual. 14" Vertical Feed Per Rev of Hand Wheel. 05" Vertical Graduations Of Hand Wheel. 001" Cross Feed Per Rev of Hand Wheel. 1" ... moreCross Graduations Of Hand Wheel. 001" Grinding Wheel Diameter. Standard. 8" Grinding Wheel Width. Standard. 0.5" Grinding Wheel Hole Diameter. 1.25" Grinding Spindle Speed. 3600 RPM Weight. Approximately. 1650 LBS PRICE: F.O.B. OUR WAREHOUSE. $1.950.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
|
|
|
BOYAR SCHULTZ 6" x 12" MANUAL SURFACE GRINDER + DUST COLLECTOR - #H612
aims BOYAR SCHULTZ 6" x 12" MANUAL SURFACE GRINDER + DUST COLLECTOR- H612 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Boyar Schultz Corporation of Chicago. Illinois. This is a used Manual Surface Grinder in GREAT condition. Model# H612 Challenger Boyar Schultz Surface grinders are manufactured to the highest degree of precision. Table and carriage are hardened and heat treated. The spindle. Supported by super-precision ball bearings, and preloaded to take up end thrust, is directly coupled to the dynamically balanced drive motor. Features: Spindle- The spindle. Supported by super-precision ball bearings, permanently lubricated and pre-loaded to take up end thrust, is directly coupled to a dynamically balanced drive motor. Table- The grinder table is ... moremanufactured from a rugged casting. Controlled in hardness and scientifically heat treated to remove all stress. Driven through a rack and pinion system, the table tracks on one vee way; precision ground and grooved to permit proper lubricating oil distribution. The table working surface is final ground on the grinder and checked with an electronic gage to insure specified flatness and squareness tolerances. Table Carriage- The table carriage is manufactured from a rugged casting. Controlled in hardness and scientifically heat treated to remove all stress. Topside, one flat way and one vee way, precision ground and hand spotted, provide the longitudinal track for the table. Two precision ground bottom ways travel on the precision ground and hand spotted bed ways. The table carriage is motivated by a precision ground Acme threaded screw, housed in a bracket attached to a precision ground rectangular key, which is fixture positioned to insure alignment within specified tolerances and tracks between a stationary gib and a set of adjustable tapered gibs which have been properly adjusted at the factory. 1 Horsepwer Spindle Motor. Lubrication System. O.S. Walker 6" x 12" Magn
|
|
|
6" x 12" BOYAR-SCHULTZ "612" HAND-FEED HORIZONTAL SURFACE GRINDER WALKER CHUCK
6" x 12" BOYAR-SCHULTZ"612" HAND-FEED HORIZONTAL SURFACE GRINDER WALKER CHUCK Machine is under power and can be ran. Motor- 1/2 HP Single Phase Comes with Walker 6x12 Magnetic Chuck. Will load onto customers truck locally at no charge. Buyer is responsible for pickup or freight. Machine is sold as is as shown. Please check our other machines out in our store or by going to
|
|
|
Brown & Sharpe Micromaster 6" x 12" Hand Operated Surface Grinder
Brown& Sharpe Micromaster 6" x 12" Hand Operated Surface Grinder-Inv#8358 You are bidding on a Brown& Sharpe Micromaster 6" x 12" Hand Operated Surface Grinder-Inv#8358 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery ... moreand equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 523-612-460 Voltage: 230. 3 phase. 60 cycle Gr
|
|
|
6” x 12” Doall Hand Feed Surface Grinder, Model VS612, 1980
6” x 12” Doall Hand Feed Surface Grinder. Model VS612, S/N 355-80573 New 1980 Machine Specs: 6 x 12 x 12 Grinding Area Pocket 7” Wheel 1 HP Direct Dive Super Precision Dive Spindle Weight approx. 1450 LBS Equipped With: ViBraSorb Base 5” x 10” Magna-Lock Electro Magnetic Control W/ Electro-Matic Control Bijur Auto Lube Inspect Under Power In Our Branchburg New Jersey Warehouse Questions call Dave@ 908-399-8133 Very Good Condition
|
|
|
Jet Model JSG-612 6" x 12" Hand Operated Surface Grinder
Jet Model JSG-612 6" x 12" Hand Operated Surface Grinder-Inv.8136 You are bidding on a Jet Model JSG-612 6" x 12" Hand Operated Surface Grinder-Inv.8136 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken ... moredirect from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 73470 220V/3PH/60HZ Longitudinal table feed: 12" Cross table feed
|
|
|
Taft Peirce 6 x 12 Model 100 Surface Grinder (Inv.20325)
Taft Peirce 6 x 12 Model 100 Surface Grinder. One of the most accurate grinders made. This one features a DoAll Selectron Electro-magnetic chuck control on a Walker 6 x 12 inch TTP Fine-line chuck. Tilting head Coolant system Ultra fine feeds on both the infeed and downfeed Resolution of infeed fine feed/grad: 000020 Resolution of downfeed fin feed/grad: 000010. Inv.20325-MFSYYY) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the ... moreauction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f845a12d7-0x10
|
|
|
1979 GRAND RAPIDS 480 Surface Grinder, 12" x 30" W/ Electro Magnetic Chuck
ebay template Chucking Length: 48" Width: 16" Wheel to Table: 26" Wheel Dia. 14" 220v/ 3 Phase, Over the wheel dresser Electromagnetic Chuck Autofeed XYZ This machine weights about 8.000Lbs and requires a $400.00 Palatizing fee if you want to go enclosed. SPECS SUBJECT TO VERIFICATION Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards ... moreto payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please
|
|
|
Kikinda Automatic 3 Axis 12 x 22 Surface Grinder with Magnetic Chuck
Purchased New 1992;One Owner Fully Automatic with 10 x 20 Walker magnetic Chuck. Fine Pole 208 3-phase power; In Good Working Condition Digital Readout on the Z Axis Table Surface: 12 x 35 Inches Max Grinding Length: 22 Inches Max Grinding Width: 14 Inches Max Vertical Height of Wheel Axis: 20 Inches Freight Quote Estimated. Buyer chooses and pays for freight. Approximate Weight: 7500 Lbs. No returns
|
|
|
CONCORD 6" x 12" MANUAL SURFACE GRINDER
aims CONCORD 6" x 12" MANUAL SURFACE GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Spain by Concord Machine Tool Co. This is a used Manual Surface Grinder in GREAT condition. Features: Selter 12" x 6" Magnetic Chuck. Specifications: Table: Table Size: 12" x 6" Magnetic Chuck Size: 12" x 6" Travels: Longitudinal Travel(X-Axis) 13" Cross Feed Travel(Y-Axis) 7" Vertical Wheelhead Travel(Z-Axis) 10" approx. Wheelhead: Grinding Wheel: 7" max. Maximum Vertical Working Height(under 7" wheel) 7" General: Motor: 1 Horsepower. 220/ 440 Volt, 3,600 rpm, 2.8/ 1.4 Amps, 60 Hz Electrical: 220/ 440 Volt. Three Phase Overall Dimensions: 37" x 39" x 69" tall. Comes as shown in pictures. Check out the ... morephotos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CONCORD 6" x 12" MANUAL SURFACE GRINDER CONCORD 6" x 12" MANUAL SURFACE GRINDER CONCORD 6" x 12" MANUAL SURFACE GRINDER CONCORD 6" x 12" MANUAL SURFACE GRINDER CONCORD 6" x 12" MANUAL SURFACE GRINDER CONCORD 6" x 12" MANUAL SURFACE GRINDER Reliable Tool Inc. c 2011 | Powered by
|
|
|
Boyer Schultz Model H612 manual surface grinder machine 6" x 12" magnetic chuck
The title is not a complete description so please read the ad description. please scroll down and view all the photos. Bidders please read the ad. Welcome to an listing by Best Bay Machinery sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following S/N: 26576. Table size: 18" x 5-5/8" Table longitudinal travel 19" cross 6-13/16" grinding wheel max dia 7" hole size: 1.25, 9-1/2 max distance, handwheel graduations.0005" cross.001, mounted work light, 3 phase, 230-460 volts, 3450 rpm, boyar schultz dust collector, magna-lock electric chuck with clamps, Walker Ceramax permanent mag chuck 220V 3 Phase Description, Boyer Schultz surface grinder MODEL H612 220 v 3 PHASE WT IS 9 50# ON A PALLET specifications ... morefrom Manufacturer FYI only! SPECIFICATIONS: Item ships from Chicago 60628 Questions email or call Bob 773-392-5055 Please check our store for the best deals on machinery and tooling at our store! Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item
|
|
|
YUASA 550-001 RADIUS AND ANGLE DRESSER 12" WHEEL SURFACE GRINDER
WarnerSales Warner See all my listings: WarnerSales YUASA 550-001 RADIUS AND ANGLE DRESSER 12" WHEEL SURFACE GRINDER Offered is a USED Yuasa Radius and Angle Dresser. Model# 550-001. Description: An extremely accurate and versatile unit for use on all O.D. I.D. surface grinding operations. Adjustable gibs. Gage block setting for grinding precise radii. Easy. Fast, accurate radius setting. Radius is set on the grinder by measuring over the two pins or by inserting a gage block for direct reading. Inside or outside radius is determined by using either the left or the right hand pins. Convex Radius Dressing Capacity: 1-5/8" Concave Radius Dressing Capacity: 1-5/8" Wheel Capacity: 12" Included: Set of wrenchs. Extra arbor. Extra tooling(new) RT125 and two RT32. This item is in good USED working condition. FREE SHIPPING TO ... moreTHE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International cu
|
|
|
1993 Freeport Model SGS-1230AHD, 12" X 30" Automatic Surface Grinder, Auto Dn Fd
New in 1993.Compare with Acer and Kent Now available for your inspection under power and/or purchase is this"Just Reconditioned" Absolutely Excellent" Freeport Model SGS-1230AHD, Heavy Duty. 12" X 30" Automatic Surface Grinder, S/N 306552, Manufactured New in 1993. It came from a Mold Shop that purchased it new in 1993 and took very good care of it. It is equipped with Automatic Incremental Down Feed, Automatic Lubrication System, and a Electro-Magnetic Chuck. Specifications: FREEPORT SGS 1230 AHD 28 1/2" Table length 720 mm 11 7/8" Table width 300 mm 27 5/8" Grinding length 700 mm 11 7/8" Grinding width 300 mm 19 3/4" Grinding height 500 mm Hydraulic with Automatic Cycle 29 5/8" Longitudinal travel(X-axis) 750 mm 13 7/8" Transversal travel(Y-axis) 350 mm 23 3/4" Vertical travel(Z-axis) ... more600 mm Automatic cross-feed: Automatic vertical feed: Automatic down feed 14" Diameter of grinding wheel 355 mm 2" Width of the grinding wheel 50 mm 5" Wheel int. diameter 127 mm Grinding wheel speeds 1450 RPM Voltage 220V/440V/3PH/60CYC presently on 220V 5.280 lbs. Machine's weight about 2400 kg Overall dimensions machine: 91" Length 2300 mm 71" Width 1800 mm 91" Height 2300 mm Various accessories: Coolant system Electrical magnetic chuck 27 5/8" Length 700 mm 11 7/8" Width 300 mm Automatic Incremental Down Feed Automatic Lubrication System This Machine is a Great Buy We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically state
|
|
|
Harig 612 Surface Grinder- 6" x 12" Magnetic Plate - Vac-U-Guard Wheel Cover
Item Information Item Name: Harig 612 Surface Grinder- 6" x 12" Magnetic Plate Item# 10274 Price/Each: $2.500.00 Year: Brand Name: Harig Model: 612 Serial# Asset Tag: 5617 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description HARIG 612 SURFACE GRINDER 6" x 12" WALKER CERAMAX MAGNETIC PLATE VAC-U-GUARD WHEEL COVER WORK LIGHT Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments ... moreare to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damag
|
|
|
Taft Peirce 6 x 12 Model 200 Surface Grinder (Inv.20325)
Taft Peirce 6 x 12 Model 200 Surface Grinder. One of the most accurate grinders made. This one features a DoAll Selectron Electro-magnetic chuck control on a Walker 6 x 12 inch TTP Fine-line chuck. Tilting head Coolant system Ultra fine feeds on both the infeed and downfeed Resolution of infeed fine feed/grad: 000020 Resolution of downfeed fin feed/grad: 000010. Inv.20325-MFSYYY) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. ... moreAll items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Boyar Schultz 6'' x 12'' Surface Grinder with Built in Dust Collection System
Boyar Shultz 612 Surface Grinder with built in dust collection system please call 203-592-8402 with any questions before you bid. Buyer is responsible for all shipping and handling charges but we will assist in any way we can. Free loading on your truck or trailer from our Watertown Ct facility.We encourage you to inspect before you buy.Payment is in the form of cash or bank check unless otherwise agreed upon in advance.
|
|
|
Delta Toolmaker 6 x 12 Surface Grinder with Magnetic Chuck
Milwaukee Delta Toolmaker surface grinder. Includes original motor. 5 x 10 Brown and Sharpe magnetic chuck, 1/2 x 7 grinding wheel, and two dressing diamonds. This machine has all original covers and shrouds. Appears to be a 1953 model based on the serial number. Machine was reworked in 1999 including local rescraping and grinding. Includes original product brochure. Motor is 1/2 horsepower. Dual voltage, single phase with extra long cord. Perfect for garage or basement shop. Machine grinding envelope: 13.5 long by 6 cross. Six inches from bottom of 7 inch max. diameter wheel to top of mag. chuck. 9 1/2 inches to top of t-slot table. Mounts up to a 7" wheel x 1/2 with a 1.25 center hole. Rough and fine head adjustment. Capable of grinding to.00025 with widely spaced.0005 downfeed graduations. Micrometer cross feed for accurate step and ... moregroove grinding. OD grinding possible with Spindex(not included) Comes mounted on original cast iron leg set. A small. Heavy duty caster set is mounted on the legs. Approximate weight is 700 lbs. I will disassemble. Skid, band, and load no charge onto your truck or freight carrier. Crating is extra, and freight charges are the responsibility of the buyer.
|
|
|
BOYAR SHULTZ CHALLENGER 6" X 12" HAND FEED SURFACE GRINDER W/ RADIUS DRESSER
I BOUGHT THIS OUT OF A TOOL AND DIE SHOP THAT CLOSED HERE IN MY AREA. WORKS GREAT. ITS A BOYAR SHULTZ CHALLENGER HAND FEED SURFACE GRINDER. MODEL H-612 SERIAL# 25879 FROM THE SERIAL NUMBER BOOK I HAVE IT WAS BUILT IN 1979. COMES WITH A FINE POLE WALKER MAGNETIC CHUCK. ITS ALSO GOT A RADIUS ANGLE TANGENT WHEEL DRESSER WITH IT. THE SPINDLE IS 1 HP 220-440 3PHASE WIRED 220. THIS IS THE DIRECT DRIVE SPINDLE. IT USES 7 X 1/2 X 1 1/4 WHEELS. THERE IS A DUST COLLECTOR BUILT INTO THE BASE BUT IT WAS NEVER CONNECTED BY THE PREVIOUS OWNER. COMES WITH WAY COVERS AND ONE SHOT LUBE SYSTEM. THE SPINDLE IS QUIET AS A MOUSE. WE REPAINTED IT. EMAIL WITH QUESTIONS. BUYER PAYS SHIPPING OR COME PICK IT UP HERE AND NEVER A CHARGE FOR LOADING. BOXING OR A CUSTOM SKID IS EXTRA. THANKS KENNY
|
|
|
Okamoto Surface Grinder 12"x 24" Hydraulic No. ACC-124N IDF Elect Chuck (27141)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our Stock Number: 27141. OKAMOTO HYDRAULIC SURFACE GRINDER MODEL: ACC-124N SERIAL NUMBER: 7063 Year: GENERAL SPECIFICATIONS CAPACITY Maximum Grinding Length: 24" Maximum Grinding Width: 12" Max. Distance Under 12" Dia. Wheel: 13.5" TABLE Surface Length: 23.75" Surface Width: 11.80" Maximum Longitudinal Movement: 29.50" Maximum Cross Movement: 13.6" FEEDS Longitudinal Movement of Table Hydraulic Feed Up To: 100 FPM Hand Feed Per Revolution: 1.85" Cross Movement of Saddle Hydraulic Intermittent Feed: 0.4" Hydraulic Continuous Feed: 4-40 IPM Hand Feed Per Revolution: 25" Graduation of Handwheel: 001" Vertical Movement Of Wheelhead Automatic Feed ... morePer Table Stroke: 0001" 00015" Hand Feed Per Revolution: 05" Graduation Of Handwheel: 0001" Vertical Rapid Feed: 19"min. Grinding Wheel Diameter: 12" Width: 1-1/2" Bore: 5" Spindle Revolution: 1800 RPM EQUIPPED WITH 5 HP Spindle Motor Incremental Down Feed 12" x 24" Electromagnetic Chuck w/Variable Chuck Control Coolant System Approximate Floor Space: 103" x 74" x 73"H Approximate Weight: 5000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: If we set up shipping item will ship freight collect via FreightQuote.com. Echo Global Logistics, ICCI or any other company we are using at the time. Buyer is welcome to look for a cheaper freight rate and set u
|
|
|
1998 CHEVALIER 12" X 24" CNC SURFACE GRINDER - MODEL: FSG-1224TXII -
12" X 24" CHEVALIER CNC SURFACE GRINDER MODEL: FSG-1224TXII/ YEAR: 1998* 2 AXIS CNC CONTOLLED Z.Y(X) LONGITUDINAL HYDRAULIC INCLUDES CRISS CROSS. STEP& PLUNGE FUNCTIONS SPECIFICATIONS: MAX. GRINDING CAPACITY. 12" X 24" DIST. FROM SPINDLE CENTER TO TABLE. 23- 1/2" LONGITUDINAL TABLE TRAVEL. 25- 5/8" VARIABLE TABLE SPEED. HYDRAULIC. 16' TO 82' FPM CROSS TRAVEL SERVO DRIVEN. 12" AUTO CROSSFEED INCREMENT. 1/8" TO 2” CROSSFEED. RAPID TRAVEL. 0 TO 118” IPM CROSSFEED. MICROFEED PER GRAD. 0.0001" AUTO DOWNFEED. RAPID TRAVERSE SERVO DRIVEN. 1.6 FPM VERTICAL. MICROFEED. 0.0001" SPINDLE MOTOR. 5 H.P. STANDARD GRINDING WHEEL. 14"D X 2" X 5” EQUIPPED WITH: BALL SCREWS FOR VERTICAL& CROSS FEEDS WITH AC SERVO MOTORS CHEVALIER"CNC" AUTOMATIC CYCLE CONTROL. W/CRT DISPLAY-SELECT ... moreTHE REQUIRED GRINDING MODE. THEN ALL THE REQUIRED PARAMETERS WILL BE SHOWN ON THE"CRT" INDIVIDUAL DATA IS RAPIDLY ACCESSED THROUGH"SOFTKEYS" ON THE OPERATOR'S CONTROL PANEL. OPERATIONS SUCH AS ROUGH GRINDING. AUTOMATIC DRESSING, W/ COMPENSATION. FINE GRINDING, SPARKOUT PASSES, HEAD RETRACTION TO PRESET POINT WILL BE DONE AUTOMATICALLY. FINAL ERROR COMPENSATING GRINDING AFTER MEASUREMENT CAN BE INCORPORATED INTO ENTIRE GRINDING CYCLE AUTOMATICALLY. GRINDING HEAD WILL MOVE DOWNWARD TO START GRINDING POINT FOR THE NEXT RAPIDLY AFTER PUSHING CYCLE WITHOUT STOPPING THE CYCLE. AUTO WHEEL DRESSING WITH AUTO WHEEL COMPENSATION SPARKOUT W/AUTO WHEEL RETRACTION POWER RAPID WHEELHEAD POSITIONING HYDRAULICALLY POWERED TABLE TRAVERSE AC SERVO MOTORS WITH BALLSCREWS FOR CROSS& VERTICAL AXES 12" X 24" WALKER FINE-DIVISION ELECTRO-MAGNETIC CHUCK VARIABLE HOLD NEUTROFIER CONTROL W/VOLT METER DISPLAY BUILT ONTO THE MACHINE CONTROL FUNCTIONS COOLANT SYSTEM W/SEPERATOR HARDENED& GROUND STEEL GUIDE RAILS UTILIZING ROLLER WAY GUIDE DESIGN FOR ALL(3) AXIS DIMS. APPRO
|
|
|
One 6"x 12" HARIG Manual SURFACE GRINDER
You are bidding for ONE, USED 1970's. 6" x 12" HARIG Manual SURFACE GRINDER. It has been OVERHAULED& repainted. It is equipped with NEW WALKER CERAMAX. FINE PITCH PERMANENT Magnetic CHUCK& NEW ELECTRIC CONTROLS. Manual TRAVELS. LONGITUDINAL( Left to Right) 12" CROSS( Front to Back) 6" MOTOR: 3/4 HP. 220/ 440v, 3 Phase. WHEEL: 7" Diameter. Dimensions: 21" x 25" x 75" Weight: about) 650 lbs We bought that machine& never used it since we merged with another company who has that size machines. It is sill on the shipping skip& ready to be loaded in the outgoing truck. For more info call ALBERT at 732-687-003
|
|
|
Clausing Equiptop 12"X 24" Surface Grinder CSG-1224ASD II Automatic Mag Chuck
Lightly used Clausing Equiptop CSG-1224 ASD II surface grinder automatic hydraulic with 12"X24" electromagnetic chuck. Spindle motor is 5HP. Splash guards, coolant tanks, hydraulic tank with one spare hub and 5 spare 14" X 1.25" grinding wheels. It also has a hub with 12" wheel currently mounted on the machine. This is a 2004 model that has barely been used, it has never even had coolant in it. Machine runs fine, with minor scratches. The squaring guide on the chuck is dinged. Currenty wired for 480v 3ph. Call 314-750-1403 with questions. Payment for this machine: $500 down via paypal balance by check or wire transfer. Book Specs: Table Size 11 13/16 x 23 5/8" Max. Grinding Length 23 5/8" Max. Grinding Width 11 13/16" Max. Distance From Table Surface to Spindle Center Line 23" Standard magnetic ... morechuck size 11 13/16 x 23 5/8" Longitudinal movement of Table: Max. travel Hyd. 25 9/16" Max. travel Man. 28 3/4" Table Speed Infinitely Variable 60Hz 196-984 in/min Cross Traverse travel: Auto Traverse Increment 0.04- 0.75" Auto constant feeding speed 0.75-12.6 in/min Max. Auto traverse travel 12 3/16" Max. Manual traverse travel 13 3/8" Handwheel per revolution 0.2" Handwheel per graduation 0.001" Wheelhead vertical downfeed Automatic infeed 0.00005"0.0025" Step Feed(Jog) 0.00005" Rapid Travel. Approx. 6 in/min Slow Travel. Approx. 0.236 in/min Handwheel per revolution 0.05" Handwheel per graduation 0.0005" Grinding spindle drive Speed 60 Hz 1750 RPM Power Rating 5 HP Standard grinding Wheel Diameter 12" Width 1 1/4" Bore 3" Hydraulic Motor Power Rating 2 Hp x 6P Crossfeed Motor Power Rating 80w x 6P Elevating Motor Power Rating 80W x 6P Floor Space 106 1/2 x 63 x 73" Weights Gross weight 5038 LBS. Rated Power. Approx. 8 1/4 HP This piece can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri in Illinois or buyer to pay actual freight shipping cost, ema
|
|
|
5" x 12" Taft Pierce Model 100 Hand Feed Surface Grinder
Liberty Machinery Company You are looking at: Used- 5" x 12" Taft Pierce Model 100 Hand Feed Surface Grinder* Serial No.2853 New- 1980 LMC#33528 SPECIFICATIONS: Chuck 5" x 12" Table Travel 13-1/2" x 5-1/2" Work Height- Maximum 12" Table Movement Per Revolution of Handwheel 3.4" Crossfeed Movement Per Revolution of Handwheel.100" Crossfeed Standard Handwheel Graduations.001" Crossfeed Fine Feed Handwheel Graduations.000025" Wheelhead Movement Per Revolution of Handwheel.050" Wheelhead Standard Handwheel Graduations.0005" Wheelhead Fine Feed Handwheel Graduations.000025" Wheel Size 7" x 1/2" x 1-1/4" Hole Motor 1 HP 3.450 RPM Direct Drive Approximate Dimensions 61" x 45" x 66" Approximate Weight 1.550 Lbs. EQUIPPED WITH: 5" x 12" Permanent ... moreMagnetic Chuck One Shot Lubrication*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com
|
|
|
Sanford Model MG 6" x 12" Hand Operated Surface Grinder
Sanford Model MG 6" x 12" Hand Operated Surface Grinder General Info: Stock# 523432MD-131004 Condition: Used Brand: Sanford Model: MG Serial: 1561371 M Shipping Weight: 800 lbs. Shipping Dimensions: 48" L x 40" W x 72" H Location: Stone Mountain. GA Specifications: 6" x 12" Walker Chuck. 1/2 HP Motor, 115/230V(Currently Wired 115V) 1 Ph, Longitudinal Travel 13" Cross Travel 8-1/2" Vertical Travel 12" Allen Bradley Control Switch. Additional Info: Everything on unit works. It is in fair condition. The light is banged up. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to ... moreview this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
SPAIN!! CONCORD 6" x 12" MANUAL SURFACE GRINDER
aims SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Spain by Concord Machine Tool Co. This is a Manual Surface Grinder with Fowler Magnetic Chuck in good condition. Features: Fowler 12" x 6" Magnetic Chuck. Specifications: Table: Table Size: 12" x 6" Magnetic Chuck Size: 12" x 6" Travels: Longitudinal Travel(X-Axis) 13" Cross Feed Travel(Y-Axis) 7" Vertical Wheelhead Travel(Z-Axis) 10" approx. Wheelhead: Grinding Wheel: 7" max. Maximum Vertical Working Height(under 7" wheel) 7" General: Motor: 1 Horsepower. 220/ 440 Volt, 3,600 rpm, 2.8/ 1.4 Amps, 60 Hz Electrical: 220/ 440 Volt. Three Phase Overall Dimensions: 37" x 39" x 69" tall. Comes as shown ... morein pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER SPAIN! CONCORD 6" x 12" MANUAL SURFACE GRINDER Reliable Tool Inc. c 2011 | Powered by
|
|
|
#612H REID 6" x 12" Hand Feed Surface Grinder (Reconditioned/Rebuilt 1990)
Preowned 6" x 12" REID FAYSCOTT Hand Feed Surface Grinder. Model: 612H, S/N 14467(New 1959. Rebuilt/Reconditioned Approximately 1990) Table travel: longitudinal cross Maximum distance. Bottom of 7" diameter wheel to top of table Size of grinding wheel Spindle speed Elevation handwheel dial graduated to Cross feed handwheel dial graduated to 14" 7" 12-1/2" 7" diameter x 1/2" face x 1-1/4" bore 3440 R.P.M. 0005" 001" Equipped With Cast iron base Dual timing belts to effect table movement 6" x 12" O.S. WALKER permanent magnetic chuck Manually operated BIJUR one-shot lubrication system 1 H.P. 3/60/220-440 volt POPE direct drive spindle motor with updated electrical controls Machine is wired for 440 volt operation. Approximate Weight: 1.425 Lbs. Approximate Dimensions: 48" L-R ... morex 48" F-B x 66" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Abrasive 12" x 24" 2-Axis Hydraulic Surface Grinder Model No. 1224 Hydrabrasive
Abrasive 12" x 24" 2-Axis Hydraulic Surface Grinder Model No. 1224 Hydrabrasive Abrasive 2-Axis Hydraulic Surface Grinder Ref.46-571 Model No. 1224 Hydrabrasive Serial No. 1224-50H0 Grinding Capacity: 12" x 24" Maximum Distance Spindle Center to Table Top: 24" Maximum Distance Under New Wheel to Chuck: 13-1/2" Maximum Grinding Wheel Size: 12" x 1" Overall Dimensions: 74" x 72" x 102" High Equipped With: 12" x 24" Permanent Magnetic Chuck Coolant Pump& Tank Splash Guards 3 HP Direct Drive Spindle Motor 220/440/3/60 All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin ... moreat 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
OKAMOTO "6-12/14 LINEAR" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER Q# 25687
QUOTE#25687. 6" x 12" OKAMOTO"6-12/14 LINEAR" HAND-FEED HORIZONTAL-SPINDLE SURFACE GRINDER Serial No 923. Model PFG612, EQUIPPED WITH: 6" x 12" Walker Electro-Magnetic Chuck w/Controls One Shot Lubrication System CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 6.2" x 14" Grinding Width Capacity. Maximum. 7.5" Grinding Length Capacity. Maximum. 14" Height Table to Standard Wheel. 14" Table Load Capacity. 108 LBS. Table Longitudinal. Manual. 15" Table Cross Travel. 8" Grinding Wheel Diameter. Standard. 8" Grinding Wheel Width. Standard. 0.75" Grinding Wheel Hole Diameter. 1.25" Grinding Spindle Speed. 8000 SFPM. Grinding Wheel Spindle Motor. 2 HP. Weight. Approximately. 1650 LBS. PRICE: F.O.B. OUR WAREHOUSE. $3.950.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR ... moreSELL. Ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1420a70ffc5-0xf1-
|
|
|
12" W 24" L Okamoto ACC12.24 DX3 SURFACE GRINDER, auto idf, 3x auto feeds, emc,
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 12" W 24" L Okamoto ACC12.24 DX3 SURFACE GRINDER. Auto idf, 3x auto feeds, emc, Ref# 151699 iammdna XGRDSU 12" X 24" OKAMOTO"HIGH-PRECISION" SURFACE GRINDER WITH"DX" ... moreSERIES PROGRAMMABLE AUTO INCREMENTAL DOWNFEED MODEL: ACC-1224DX S/N: 63999 MFG: 1995 NOMINAL GRINDING CAPACITY. 12" x 24" MAXIMUM HEIGHT UNDER 12" WHEEL. 13.7" TABLE SPEED. INFINITELY VARIABLE. UP TO 82' FPM MAX. LONGITUDINAL TABLE MOVEMENT. MANUAL. 30" AUTO CROSS FEED INCREMENT. 0.002" TO.80" AUTO CONINOUS CROSSFEED. 4' TO 40' FPM CROSSFEED. MANUAL, HAND FEED PER REV. 0.25" GRAD. OF HANDWHEEL. 0.001" OPTIONAL CROSS FEED KNOB. GRADUATED TO. 0.0001" MAX. CROSSFEED. MANUAL. 14" AUTO INCREMENTAL DOWNFEED INCREMENTS. 0.00005" TO.0015" POWER RAPID WHEEL POSITIONING RATE. 16" IPM SPINDLE MOTOR. 5 H.P. WHEEL SIZE. 12" X 1.5" X 5" APPROX. DIMS. FOR OPERATION. 108" x 76"D x 70"H APPROX. MACHINE WEIGHT. 5.280 LBS. EQUIPPED WITH: DX" PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED: SERVO DRIVEN DOWNFEED-AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE& PLUNGE OPERATIONS-DUAL RATE AUTO DOWNFEED W/COARSE& FINE SELECTIONS-DIGITAL DISPLAY FOR VERTICAL AXIS-SPARKOUT PAS
|
|
|
12” x 24” Kent 3 Axis Automatic Surface Grinder, Model SGS 1224 AHD, 1994
12” x 24” 3 Axis Automatic Surface Grinder, Model SGS 1224 AHD. S/N 459014, New 1994 Machine Specs: Working Surface 12” x 24” Height Under Wheel 12” Travels Long 24.5” Cross 13.5” Spindle HP 5 HP 220/440 Volt 3 Phase Wheel Size 12” x 1.5” x 5” Weight 4500 LBS Equipped With: Incremental Down Feed 12” x 24” Kanetsu Electro Magnetic Chuck with Control Dust Suction Coolant Unit Over the Wheel Dresser Fagor 2 Axis DRO Auto Lube Power Elevation Very Good Condition Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
6 X 12 HARIG HYDRAULIC SURFACE GRINDER,MAGNETIC CHUCK,COOLANT TANK
THIS IS A VERY NICE HARIG 6 X 12 SURFACE GRINDER.SER#3236-3, WITH NEW CROSS SLIDE SCREW& NUT,REBUILT HYDRAULIC CYCLINDE,VALVE AND PUMP. HAS HYDRAULIC ON X AXIS ONLY. CONTROLL FOR THE Y AXIS IS THER, BUT HAS NO ELECTRIC MOTOR TO RUN IT,SEE PICTURES. ALL IN GOOD OPERATING CONDITION. THIS SPINDLE IS QUIET AND IS VERY SMOOTH.WIRED 230 VOLT/3/60, FLOOR SPACE 46 X 46 X 72 AND WEIGHS 1300 LBS. HAS COOLANT TANK BUT NO COOLANT PUMP. IF NEEDED.ASK. FOR CC AND SHIPPING QUOTES, CALL TINA AT 727-362-8318, FOR ALL OTHER QUESTIONS CALL GERRY AT 727-547-0616 OR E MAIL. LOCAL INSPECTIONS AND PICK-UPS ARE WELCOME. NEVER A LOADING CHARGE On Jul-12-13 at 09:21:37 PDT. Seller added the following information:
|
|
|
6" x 12" CHEVALIER Super 612 Hand Feed Surface Grinder (New 1989)
Preowned 6" x 12" CHEVALIER Hand Feed Surface Grinder. Model: Super 612, S/N: C1785002(New 1989) Maximum grinding length Maximum grinding width Maximum table travel: longitudinal cross Maximum distance from table working surface to spindle center Cross feed handwheel graduated in increments of Cross feed travel per revolution of handwheel Micro cross feed knob graduated in increments of Cross feed travel per revolution of micro feed knob Wheelhead travel per revolution of handwheel Wheelhead handwheel graduated in increments of Micro wheelhead knob graduated in increments of Wheelhead travel per revolution of micro feed knob Spindle speed Wheel size 12" 6" 16" 7-1/2" 18" 001" 2" 00005" 004" 05" 0005" 00005" 005" 3.450 R.P.M. 8" diameter x 1/2" width x 1-1/4" ... morebore Equipped With All meehanite cast iron construction Roller bearing sides for all axes with zero backlash between guideways and roller bearings Hardened and replaceable ways Fine feed knobs for cross and vertical feeds graduated to.000050" 6" x 12" O.S. WALKER fine division electromagnetic chuck and control Leveling pads Work light 2 H.P. 3/60/230-460 volt spindle motor and electrical controls Machine is wired for 230 volt operation. Approximate Weight: 2.425 Lbs. Approximate Dimensions(Machine Only) 54" L-R x 50" F-B x 72" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
6" x 12" BROWN & SHARPE Valumaster Hand Feed Surface Grinder (New 1984)
Preowned 6" x 12" BROWN& SHARPE Hand Feed Surface Grinder. Model: 612 Valumaster, S/N: 523-612-3624(New 1985) Working surface of table Grinds work to- length width height(using 8" diameter wheel) Maximum longitudinal table travel Cross feed travel by handwheel Minimum/Maximum distance from wheel spindle to top of table Spindle speed(no load) Standard handwheel dials for cross and vertical feeds read to Wheel size 6" x 12" 12" 6" 12" 14" 7" 3-1/4" 16" 2.860 R.P.M. 0002" 8" diameter x 1/2" width x 1-1/4" bore Equipped With Table moves on precision ground and lapped steel rollers 6" x 12" O.S. WALKER fine-division permanent magnetic chuck Fine feed knobs graduated to.0001" for both cross and down feed handwheels Over-the-wheel parallel dresser ... moreOriflex spindle drive Work light BIJUR manual lubrication system 2 H.P. spindle drive motor and electrical controls Machine is wired for 3/60/208 volt operation. Approximate Weight: 1.425 Lbs. Approximate Dimensions: 36" L-R x 36" F-B x 70" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
Wet/Dry Grinder Surface Sander Polish 12" Round Aluminum Wheel
Wet/Dry Grinder Surface Sander Polish 12" Round Aluminum Wheel ITEM DESCRIPTION: Used. Good condition. I am not sure what equipment it goes with but believe it is a wet/dry grinder or sander part. The wheel is 12" in diameter, made of aluminum. This one has sand paper attached to the top. My Policies: TAX: New Mexico and Florida residents pay 7% Gross Receipts Tax SHIPPING& HANDLING SHIPPING TERMS: The buyer is to pay all shipping charges. Most items will be listed with the ebay shipping calculator so that you can calculate your shipping cost prior to bidding. PLEASE NOTE: You will be charged the USPS or UPS retail shipping rate as given by the ebay shipping calculator. These are the actual rates as computed by the calculator based on the weight and dimensions of the package and the distance it is to be shipped. INTERNATIONAL ... moreSHIPMENT CUSTOMS DECLARATION: International customs fees and customs brokerage fees(if applicable) will be charged to the buyer. The customs declaration form will be filled out truthfully with the actual bid amount given as the value of the package. I will not mark items as gifts or claim a value less than what has been paid for the item. Powered by SixBit's eCommerce Solution
|
|
|
6” x 12” Boyar Schultz Hand Feed Surface Grinder, Model H612, Really Nice
6” x 12” Boyar Schultz Hand Feed Surface Grinder, Model H612. S/N 27000 Machine Specs: Grinding Area 6” x 12” Travels Long 14” Cross 7” Wheel 7” Machine Weight 750 LBS Equipped With: 6” x 12” walker Chuck Over the Wheel dresser Power Elevation Dust Collector Base Lube System Very Good Condition Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
BOYAR SCHULTZ SURFACE GRINDER 6" x 12" 612 DeLuxe
Used Boyar-Schultz surface grinding machine model 612 DeLuxe. Wired for 3phase 220V. Machine is fully operational! Walker magnetic chuck included. Buyer is responsible for arranging freight and all shipping and handling charges but we will assist in any way we can. Free loading on your truck or trailer from our Aurora. Illinois facility. We encourage you to inspect item before you buy. Please call 630-375-6248 with any questions before you bid.
|
|
|
DoAll 8" x 24" Hydraulic Surface Grinder D824-12
Call 203-592-8402
|
|
|
#612 HARIG 6" x 12" Hand Feed Surface Grinder (New 1983, Rebuilt by S.T.K.)
Preowned 6" x 12" HARIG Hand Feed Surface Grinder. Model: 612, S/N: 14633(Originally Built 1983. Rebuilt by S.T.K. Machine Rebuilders) Working surface of table Table travel: longitudinal cross Grinding wheel: maximum diameter maximum width hole size Maximum work height under 7" diameter wheel Elevating handwheel graduation Cross feed handwheel graduation 6" x 12" 12-3/4" 6-3/4" 8" 1-1/4" 1/2" 12" 0005" 001" Equipped With Teflon coated longitudinal ways Cable-drive system for table movement ACU-RITE Qwikcount two-axis digital readout 6" x 12" O.S. WALKER fine division permanent magnetic chuck Vac-U-Guard wheel guard with 2-3/4" diameter dust collection outlet#A-72 ACE external dust collector with 1 H.P. 1/60/115-230 volt suction motor Work light 2 H.P. 3/60/208-220-440 ... morevolt direct motorized spindle and electrical controls with machine mounted electrical disconnect box Machine is wired for 208 volt operation. Approximate Weight: 850 Lbs. Approximate Dimensions: 36" L-R x 53" F-B x 77" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
12" X 24" Okamoto Mod# 124N Accugar Precision Hydraulic Surface Grinder, 1990
Title: 12" X 24" Okamoto Mod# 124N Accugar Precision Hydraulic Surface Grinder. 1990 Description: Our Internal Stock# 2-18-14 dale) You are about to purchase the following item: 1- 12" X 24" Okamoto Mod# 124N Accugar Precision Hydraulic Surface Grinder. 1990 SPECIAL PURCHASE! DON'T MISS THIS RARE OPPORTUNITY! I CAN SEND YOU ACTUAL PICTURES OF THE MACHINE IF INTERESTED. COULD NOT UPLOAD ONTO EBAY. Model# 124N Year of Mfg: 1990 SN: 7734, Mfg'd: 1990 12" x 24" Walker Magnetic Chuck, Incremental(Automatic) Down Feed, Hydraulic Power Feeds, Power Elevation, Cross Feed Table Speed& Step Feed Control, Coolant Pump& Tank Working Surface 12" X 24" T-Slot(No. x Width) 3 x.669" GRINDING WHEEL(Standard) OD x Width x ID 12" X 1.5" X 5" Spindle Revolution(60Hz) 1800, 5 HP Motor, ... more3-Phase, 60 cycle, 230/460 Volt 2 HP Hydaulic Power Suppy Unit, AC Motor for Downfeed Lubrication, Floor Space 78" X 72" X 68" Approximate Weight 4.900 Lbs. THIS MACHINE IS COMING FROM WORKING SERVICE. BEING SOLD IN GOOD WORKING CONDITION. WE CAN ALSO GET YOU GREAT SHIPPING RATES VIA UPS GROUND LTL SHIPMENT TO A BUSINESS LOCATION WITH A LOADING DOCK/ LIFT TRUCK IN THE CONTINENTAL USA. LOCATED IN HOUSTON. TEXAS AREA. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Buyer to pay for all shipping to their location. We will pay to have loaded on truck of your choice. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email addr
|
|
 |