|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Woodruff, United States Davis Standard 3.5 inch 24:1 extruder with general purpose screw. 75 hp dc motor with digital controls model 35vt 1739:1 gear reduction operational
Buy It Now
Condition: Used Location: Woodruff, United States Used 2.5" Davis Standard Extruder. Model 25IN25, 24:1 L/D, Air Cooled, 4 Barrel Zones, 40HP DC Reliance Motor, DC Reliance VS Drive, EAS 301 Control ... moreSystem, Pressure Readout, 17.28: Gear Box Ratio, 75hp Gear Box Capacity with 1.25 Service Factor, 42" Center line Height, with Clamp. 480/240/60/3 Machine Dimensions: 57" x 120" x 80" Machine Weight 6.500lbs
Buy It Now
Condition: Used Location: West Boylston, United States Water cooled. 17.56 gearbox ratio / 100 RPM screw speed.UNIT IS MISSING SCREW. We can have one quoted if necessary. DSPW model. Includes strand die. We ... morecan help you obtain a truck if needed. We deal in all sorts of plastic machinery, twin and single screw extruders we have both new and used parts.
Buy It Now
Condition: Used Location: Berryville, United States Useful Links. AAAA+++++ ". Fast & hassle free. communication, pleasant and stress free ". " No problems, product as described, good. We are experts in ... moree-waste recycling, re-use, removal, and secure data destruction.
Buy It Now
Condition: Used Location: Woodruff, United States MODEL: 20IN20. PHASE: 3PH. VOLTS: 460V. SERIAL NO.: K8203. Orifice Size: 1".
Buy It Now
Condition: Used Location: Roanoke, United States
Buy It Now
Condition: Used Location: Woodruff, United States 1.5" EXTRUDER 15IN20E R-6.53 MODEL: 15IN20E. PHASE: 3PH. VOLTS: 460V. RATIO: 6.53 DATE: 3/88. SERIAL NO.: K5242.
Buy It Now
Condition: Used Location: Lake Zurich, United States Subject to Prior Sale. 5 Barrel Zones, 10 Die Zones, Belt Driven With 17.36:1 Gear Ratio (105 HP Capacity With 1.5 S.F.).
Buy It Now
Condition: Used Location: Woodruff, United States MODEL: 25IN25. PHASE: 3PH. VOLTS: 460V. SERIAL NO.: M3204. Orifice Size: 5/8".
Buy It Now
$2000.00 Shipping Condition: Used Location: Campbell, United States You are buying ONE Machinery Line. Three more are available, but not listed and not part of this sale.NRM 4.5" 20:1 screw and barrel replaced, very low ... morehours. Turn Key Set-up, this line is Plug & Play.
Buy It Now
Condition: Used Location: West Palm Beach, United States Motor STOP/START station, w/Screw RPM, Motor Amp Display and ten turn. New 40 HP AC Vector Motor. side of cross head dies. Cast Aluminum Barrel Heaters. ... morePanel to be rotated 90 Degrees to allow operator access downstream from exit.
Buy It Now
Condition: Seller refurbished Location: West Palm Beach, United States Partally Rebuilt 3.5” NRM 24 to 1 Extruder with Warranty! This is what a completed 3.5" Rebuilt Extruder by us will look like! Motor STOP/START station, ... morewith Screw RPM and Motor Amp Displays, and ten turn.
Buy It Now
Condition: Seller refurbished Location: West Palm Beach, United States New Gefran Pressure Monitor alarm audible 1st alarm, and second alarm, motor. 24 to 1 Screw rebuilt to fit barrel. QTY (3) HEAT/ONLY die zones, including ... moreCrydom 90 amp Solid State relays, circuit. 1”ID cost approx.
Buy It Now
Condition: Used Location: Rocky Face, United States
Buy It Now
Condition: Seller refurbished Location: West Palm Beach, United States New 24 to 1 Screw. Many New Electrical Parts! QTY (3) HEAT/COOL barrel zones, QTY (2) HEAT/ONLY die zones, including new: solid state relays, fuse protection, ... morewiring and thermocouples. New 5 HP AC Vector Motor.
Buy It Now
Condition: Used Location: Gardner, United States ITEM NUMBER: 5277 PELLETIZER PARTS CUMBERLAND USED: Cumberland 6" Bolt on Rotors 8. 12& 16 knife Used Cumberland pelletizer rotors. Fits 6" ... morestandard. And quietizer pelletizer. Price is for one rotor. We carry a full line of replacement parts for Cumberland. Conair, and other pelletizers. We deal in all sorts of plastic machinery. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment listings. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner. MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer. We will help with getting a trucking company if needed. Most any type of collected funds payment is accepted. Thanks for looking& don’t forget to check out our other auctions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1456cbf530d-0x112-
Buy It Now
Condition: New Location: Gardner, United States Other sizes are availble, inquire for a quote.
Buy It Now
$39.00 Shipping Condition: New – Open box Location: Columbia, United States 1 3/4" I / O top connections.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : 3/4 Feedscrew. Thread Width 3.75mm. Screw Length: 21". Total Length: 25-3/4". If you do not have an account No Worries! SKU# SB-181990. Pitch: ... more3/4".
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : 3/4 Feedscrew. Thread Width: 3mm. Screw Length: 21". Total Length: 25-3/4". If you do not have an account No Worries! SKU# SB-182005. Pitch: ... more3/4".
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : 3/4 Feedscrew. Thread Width: 4mm. Screw Length: 21". Total Length: 25-3/4". If you do not have an account No Worries! SKU# SB-181994. Pitch: ... more3/4".
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : 3/4 Feedscrew. Mixing Threads: 4-3/4". Screw Length: 21". Total Length: 25-3/4". SKU# SB-181985. Pitch: 3/4".
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : 3/4 Feedscrew. Mixing Threads: 2". Screw Length: 21". Total Length: 25-3/4". SKU# SB-182002. Pitch: 3/4".
Buy It Now
Condition: Used Location: West Palm Beach, United States 2.0 Mark VI Extruder GearboxDavis StandardDate 10/94Serial P8996SO 5233917.5 gear ratio1.25 service factor 100 RPM output screw speed
Buy It Now
Condition: Used Location: West Palm Beach, United States 2.5” Davis Standard ExtruderHI-BoyAs IsNo Controls
Buy It Now
Condition: Used Location: Miami, United States Davis Standard 3.5 inch 24:1 extruder with general purpose screw. 75 hp dc motor with digital controls model 35vt 1739:1 gear reduction operational
Buy It Now
Condition: Used Location: Salt Lake City, United States Davis-Standard Gememi GC-5 Conical Twin Screw Extruder• 25 HP Baldor Motor & Drive• Direct Logic PLC with Touch Screen• Split Clamp Adapter• 4 Barrel ... moreZones• Serial # 8410• Model # 98626• Mfg Date 01/1986
Buy It Now
Condition: Used Location: Twinsburg, United States Extruder –. Model: E65. Screw: 65mm. Motor HP: 50. Overall Length: 16'. Width of Tank: 16". Length of Tank: 15'. Depth of Tank: 12".
|
|
|
|
75887 Used- Davis Standard Extruder Gearbox, Model 8''T. Ratio 25.6 to 1. HP rat
Used- Davis Standard Extruder Gearbox. Model 8'T. Ratio 25.6 to 1. HP rating 300, service factor 1.74, maximum screw speed 66 rpm. 64 gallon oil capacity. Last used with an 8' single screw extruder. ref# 75887 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Davis Standard 1 1/4 inch Extruder Gear Box
Davis Standard Extruder Gear box. Model DS12 HM, Gear rato 12.9:1, 150 rpm output, Excellent condition. Removed from our extruder to change to a 75 rpm screw speed.
|
|
|
45119003 Used-Davis Standard 1.5" Single Screw Extruder, Model DS-15, Serial #K5
Used-Davis Standard 1.5" Single Screw Extruder. Model DS-15, Serial#K5422, SO#01045, Year Built 1988, Electrically Heated, Air Cooled ref# 45119003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13efc29ea39-0xf3-
|
|
|
45119002 Used-Davis Standard 2.5" Single Screw Extruder Model 25IN25F, Serial #M
Used-Davis Standard 2.5" Single Screw Extruder Model 25IN25F. Serial#M3908, SO#05568, Built 1991, 4 Zones, Electrically Heated Air Cooled ref# 45119002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
1" PLASTIC EXTRUDER by KILLION/DAVIS STANDARD
STANDARD BENCH MODEL 1" KILLION/DAVIS EXTRUDER ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 3 HP DC MOTOR. SCR DRIVE REDUCER RATIO: 1 5:1 MAX. SCREW RPM: 120 AMBIENT COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 3 BARREL. 1 ACCESSORY ZONE HOPPER SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; ... morecustomer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
|
|
|
2" PLASTIC EXTRUDER by STERLING/DAVIS STANDARD
2" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 20 HP VARIABLE SPEED U SVD BARREL: ELECTRICALLY HEATED. AMBIENT COOLING, VENTED, 24:1 LD RATIO REDUCER: 11:1 LIQUID COOLED FEED THROAT CONTROL PANEL: ANALOG TEMPERATURE CONTROLLERS. 4 BARREL. 2 ACCESSORY ZONES EIGHT HOLE STRAND DIE MOUNTED AND WIRED 2" SCREEN CHANGER MOUNTED AND WIRED WITH HYDRAULIC UNIT SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard ... moreskid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
|
|
|
2.5" PLASTIC EXTRUDER by STERLING/DAVIS STANDARD
2.5" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 30 HP VARIABLE SPEED U SVD WITH ELE CTRIC REMOTE SPEED CONTROL BARREL: ELECTRICALLY HEATED. VENTED, AIR COOLED, 30:1 LD RATIO LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 5 BARREL. 1 ACCESSORY ZONE EIGHT HOLE STRAND DIE MOUNTED AND WIRED REBUILT BY BERLYN SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; ... morebeyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
|
|
|
41592002 Used- Davis Standard 3-1/2'' Single Screw Extruder, Model 3.5MV-350. 30
Used- Davis Standard 3-1/2' Single Screw Extruder. Model 3.5MV-350. 30 to 1 L/D ratio. Electrically heated, air cooled, 5 zone barrel. Water cooled feed throat, no hopper. Driven by a 60 hp, 3/60/460 volt motor thru a gearbox, ratio 17.4 to 1. Includes a variable speed inverter, a C clamp, and a control panel with Eurotherm model 2208 digital temperature controls. Requires screw. Built 2000. ref# 41592002. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight ... morecarrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
86642 Used- NRM Davis Standard 3-1/2" Diameter Single Screw Extruder. 24 to 1 L/
Used- NRM Davis Standard 3-1/2" Diameter Single Screw Extruder. 24 to 1 L/D ratio. Electrically heated. Water cooled, jacketed barrel section. 24.89:1 gearbox ratio, 100 hp DC motor with SCR, control panel with 4 barrel, 5 die zones with temperature controllers, water circulation system with pump, serial#19364, SO#64696. ref# 86642. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping ... moreestimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
42133001 Used- NRM/Davis Standard 3-1/2" Single Screw Extruder, Model 3.5 PM III
Click To Enlarge- Used- NRM/Davis Standard 3-1/2" Single Screw Extruder. Model 3.5 PM III. Approximate 32 to 1 L/D ratio. Electrically heated, water cooled non-vented barrel, no screw. Includes a pump, tank, and heat exchanger. Water cooled feed throat, no hopper. Driven by a 50 hp, 300 volt, 850/1020 rpm motor thru a gearbox, ratio 24.89 to 1, approximate 42' centerline height. Includes a Key Filters hydraulic screen changer, model KTB 2.5, with a 2 hp hydraulic power pack, and a control panel with an Allen-Bradley Panelview 1200, and a Reliance VS power drive. Eurotherm 2208 controllers and a Reliance drive. Mounted on a common base. ref# 42133001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's ... morepayment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45009001 Used- Davis Standard Thermatic Extruder, Model 80IN4 5T, Serial #BJ692,
Click To Enlarge- Used- Davis Standard Thermatic Extruder. Model 80IN4 5T, Serial#BJ692, Manufactured 10/2006. Hinged die support, rod die assembly, and temperature controller; 200 hp, 1750 rpm AC variable frequency drive. ref# 45009001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for ... moreeach item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
3.5" Davis Standard Extruder, 24:1 LD, 100 hp
3.5" Davis Standard Extruder. 24:1 LD, 100 hp Description: Used Davis Standard Extruder. 24:1 L/D ratio, 100 HP DC Drive, 100HP Motor, with control panel. 5 Barrel, 8 Die Zones(Barber Coleman AT580, ATplus, 2 new Omron) water cooled barrel with closed loop system. Stock#5635. Subject to Prior Sale. Buyer is responsible for setting up shipping.
|
|
|
45076008 Used- Davis Standard 3” Single Screw Extruder, Model DS-30. Approximate
Click To Enlarge- Used- Davis Standard 3” Single Screw Extruder. Model DS-30. Approximate 24 to 1 L/D Ratio. Electrically heated, air cooled 4 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 40hp, 500 volt, 1150/2000 rpm DC motor thru a gear box, ratio 7.42 to 1. Approximate 26-1/2” centerline height. Includes a control panel with a Spectrum drive, Barber-Colman temperature controllers, and a transformer. Mounted on a common base. Serial# J-6473, SO# 97962, built 1985. ref# 45076008 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment ... moreinstructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45271007 Used- Davis Standard 1" Single Screw Extruder, Model DS-10-HM. No Screw
Click To Enlarge- Used- Davis Standard 1" Single Screw Extruder. Model DS-10-HM. No Screw. Approximate 24 to 1 L/D ratio, electrically heated, air cooled 3 zone non-vented barrel, 1) barrel blower missing. Water cooled feed throat no hopper. Approximate 44" center line height. Requires a motor, includes a gearbox, ratio 12. 8 to 1. No control panel. Serial# P6737, SO# 51767, built 1994. Mounted on common base with casters. ref# 45271007 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location ... moreunless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Davis Standard Extruder, 1.5", 7.5 hp. Model 15-T
INGALLS PROCESS EQUIPMENT COMPANY MORE THAN JUST INDUSTRIAL EQUIPMENT Davis Standard Extruder. 1.5" 7.5 hp. Model 15-T Stock# 1207 Specifications» one(1) used 1.5" dia. Davis Standard Extruder. Model 15-T. Serial no. E-1204, S.O. 16971-C. 1.5" dia. screw. 24:1 L/D, electrically heated barrel. 3 barrel zones, air cooled barrel. 2 die zones. 2 adaptor zones. With complete control panel. Driven by a 7.5 hp oilgear hydraulic drive. Equipped with a 7" wide sheet die. Equipped with stainless steel hopper, Payment and Shipping Terms We accept the following types of payment: PayPal. Bankwire Transfer, Company Check, Cashier's Check Items sold to vendors in Ohio are subject to Ohio Sales Tax Please be aware- we DO NOT accept personal checks or direct payments from all credit cards We MUST verify that all checks have cleared ... moreour bank prior to any merchandise being shipped All items are F.O.B. Painesville. OH All items offered are subject to prior sale or other disposition All payments must be received within 10 days of purchase or auction. Unless other arrangements have been made If we have not recevied payment within 10 days. Buyer will be reported to eBay and the item will be relisted. SHIPPING- Units will be loaded on a flat bed truck or banded to a standard pallet CRATING WILL BE CHARGED PER ITEM- not all items will require crating costs ALL ITEMS ARE SOLD AS IS We will run items prior to sale. When possible, at the request of the customer. Please ask us any questions you may have prior to sale. Always feel free to contact us direct at the contact information listed above. Ingalls Equipment WILL NOT pay shipping for any items listed. If you would like us to obtain a freight rate for you, please contact us and we would be happy to do so. If you would like any additional photos or description we can provide those at request. Ingalls Process Equipment Company is a buyer and seller of used process equipment for the plastic. Chemical and allied industries. We have been in business since 1995 an
|
|
|
45295002 Used- Davis Standard 2-1/2" Single Screw Extruder. Approximately 24 to
ref# 45295- Click To Enlarge- Used-2-1/2" Davis Standard Single Screw Extruder ref# 45295002 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please ... moreadvise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1415af1a392-0xf6-
|
|
|
45256001 Used- Davis Standard 6” Thermatic Single Screw Extruder, Model 600S. Ap
Click To Enlarge- Used- Davis Standard 6” Thermatic Single Screw Extruder. Model 600S. Approximate 24 to 1 L/D ratio. Electrically heated, water cooled 5 zone non-vented barrel, no cooling system. Water cooled feed throat, no hopper. Approximate 42” centerline height. Includes a gearbox, ratio 17.21 to 1, and a die clamp. No motor, or controls. Serial# D7376, SO# 44302C. ref# 45256001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior ... moresale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45256023 Used- Davis Standard 2" Single Screw Extruder, Model KND250. Approximat
Click To Enlarge- Used- Davis Standard 2" Single Screw Extruder. Model KND250. Approximate 30 to 1 L/D ratio. Electrically heated, air cooled 5 zone non-vented barrel. Water cooled feed throat, no hopper. Driven by a 40hp, 3/60/230/460 volt, 1770/2642 rpm motor thru a gearbox, ratio 17.26 to 1. Approximate 76" centerline height. Includes a Dynisco hydraulic screen changer, model EH-25, serial# EH-25533, 1) 2hp power pack, and an extruder control panel with Eurotherm controllers, and an Allen-Bradley Impact drive. Mounted on a common frame. Serial# AX454, SO# 79288, built 2004. ref# 45256023 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item ... moredescription or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Extruder / Davis Standard Single Screw 3 1/2' 24/1 LD Ratio
Davis Standard 3.5" Single Screw Extruder, 75 H.P. AC Motor with drive Air Cooled 24/1 LD Ratio Contact C.J. 813-719-8134
|
|
|
TWIN SCREW CO-ROTATING PLASTIC EXTRUDER by Betol/Davis Standard
BETOL/DAVIS STANDARD TWIN SCREW CO-ROTATING PLASTIC EXTRUDER 45MM SCREWS CO-ROTATING 41:1 LD RATIO 25 HP DC MOTOR and SCR VENTED ELECTRICALLY HEATED. LIQUID COOLING FULL CONTROL PANEL with SIX(6) BARREL ZONES and FOUR(4) ACCESSORY ZONES APPROX 400 RPM MAX. SCREW SPEED FOURTEEN(14) HOLE STRAND DIE MOUNTED and WIRED BARREL and SCREWS IN GOOD CONDITION GEARBOX MAKING NOISE SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage ... morefee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
|
|
|
Plastic Extruder / Davis Standard, Single Screw, 2 1/2", 24/1 LD Ratio.
Davis Standard 2 1/2" Extruder 24/1 LD Ratio Air cooled. 4 heat zones. 30 HP AC Motor with drive Has partial heat control cabinet. controllers missing) Screw wear condition unknown. Contact C.J. 813-719-8134 Prefer no pay-pal FOB/ local pick up Used equipment. Sold in as is condition.
|
|
|
Davis Standard 3.5 inch 24:1 Extruder model 35vt
Davis Standard 3.5 inch 24:1 extruder with general purpose screw. 75 hp dc motor with digital controls model 35vt 1739:1 gear reduction operational
|
|
|
3.5" PLASTIC EXTRUDER by DAVIS STANDARD
3.5" DAVIS STANDARD HEAVY DUTY PLASTIC EXTRUDER MODEL: 35IN35H 150 HP AC VECTOR MOTOR and DRIVE ELECTRICALLY HEATED and VENTED with VACUUM PUMP 30:1 LD BARREL RATIO REDUCER RATIO: 17:1 MAX. SCREW RPM: 115 AIR COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: EUROTHERM 2208 TEMPERATURE CONTROLLERS. 4 BARREL, 3 ACCESSORY ZONES, PRESSURE, STOCK TEMP XALOY 3.5" SLIDE PLATE HYDRAULIC SCREEN CHANGER. WIRED and MOUNTED with HYDRAULIC PAK 8 HOLE STRAND DIE MOUNTED and WIRED NEW: 2000 MAX RATE: APPROX. 550 LBS.HOUR SHUT-DOWN IN VERY GOOD RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any ... moreparticular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
|
|
|
Extruder / Davis Standard Single Screw 2 1/2' 32/1 LD Ratio used no panel
Davis Standard 2 ½” 32 to 1 Plastic Extruder This is a used machine taken from closed factory. Said to have been running when taken down. There is a 40 HP DC motor but no panel or DC drive. This should be considered a core Priced to sell quick. Sold as is where is I have no way to test. Shipping Your Truck Will/Call I can load with forklift. We take Pay-Pal Please Please see our store thank you cimsales
|
|
|
extruder davis standard mark vi 2.5 24 :1 l/d ratio
this is a used extruder in very good conditionwith a 40 hp motor.4 barrels zone,air cooled,3 dies zone,amp meter,rpm gauge,belt driven.weight 5500 lbs
|
|
|
Item 6093 - Extruder Cold Feed Davis Standard 4 1/2" 90mm 4.5" Cold Feed 20:1
Item Extruder Cold Feed Davis Standard 4 1/2" 90mm 4.5" Cold Feed 20:1. One(1) Used Davis Standard 4.5” 120mm 4 1/2" Cold Feed Rubber Extruder. 20:1 L/D, 150hp 1750/2000rpm 500v motor, 17.36:1 gearbox ratio, date 11/88, Serial No. K7439, Order No. 01718 Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
|
|
|
Used Davis-Standard 6" Thermatic 60T Extruder with 250HP Motor
Used Davis-Standard 6" Extruder Model: Thermatic 60T Extruder Dims: 195" x 42" x 67" Appx. 15k lbs. Generator Dims: 118" x 40" x 45" Appx. 6k lbs. 250HP. 1780 RPM, 440V motor 8" x 8" inlet 6"Dia outlet Last running at a plastic recycling plant Pressure lubrication on gearbox Unit includes 15-day right of return This extruder was last running recycled plastics. Freedom Equipment has helped hundreds of customers with their pelleting applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers, Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems. Hammermills. Hogs/Chippers/Grinders, Crumblers. Flakers and Roller Mills. Packaging. ... moreProcessing and Plant Machinery. Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, Onsite Repair Service, Installation Services, Consulting Services, as well as quality New, Used, and Reconditioned Machinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. 2093C
|
|
|
Used 4.5" 32 to 1 L/D NRM/Davis Standard PM III Extruder
Used NRM/Davis Standard PM III Extruder 4.5" 32 to 1 L/D Water cooled Vented Eurotherm 2208 Controllers-8 Heating Zones. Flange, Adapter and 2 Die Zones 100 HP DC Motor Vary Speed Power Module 25.14 to 1 Gear Ratio 1999 vintage Rigging is needed to load Extruder
|
|
|
Davis Standard 130 mm Plastic Extruder Assembly
DAVIS STANDARD 130 mm EXTRUDER ASSEMBLY Model 130 MM 45HT. SPECIFICATIONS 130 mm diameter 30:1 L/D 1989 year of manufacture Accepts 200 HP DC drive Comes with 130 mm HDPE screw Barrel heaters are not included PAYMENT We accept pay pal wire transfers and cashier's checks as forms of payment. Once payment is received and clears the item purchased will be ready for shipment. If paid by check. The check must clear JMI's bank before shipment. SHIPPING F.O.B. Port Washington. WI 53074. The buyer is responsible for arranging pick-up. JMI will load the truck. WARRANTY All items offered"Used-As-Is" Anyone is welcome to come and inspect an item in person during regular business hours. Monday thru Friday, 8:00 AM to 4:00 PM. If you are unable to come and see the item, let us know what additional information or photos you require for ... moreyour decision making process. We will do our best to comply to your request. We reserve the right to cancel this auction at any time. CONTACT US If you have any questions. Please call Bob Jackson at 262-284-1066 or e-mail us to We can also be reached via fax at 262-284-5466. FEEDBACK We pride ourselves in providing you with the best customer service. Please contact us by phone or by e-mail. We will work with you to resolve any issues as quickly as possible.
|
|
|
Item 6061 - Extruder: Davis Standard 4.5 120mm Cold Feed
Item 6061- Extruder: Davis Standard 4.5 120mm Cold Feed One(1) NRM 4.5" 120mm Cold Feed Extruder. 10:1 L/D, 17.36:1 G/B ratio, 75HP DC motor, clamp style head, roller feed, designed for silicone Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts www.soberaysons.com Inventory on Website Phone: 216-334-2003 Fax: 216-334-2005 5500 Walworth Ave. Cleveland. Ohio 44102 United States
|
|
|
4.5" DAVIS STANDARD EXTRUDER, 30:1 L/D, 200 HP,...
YOUR SOURCE. for Pharmaceutical. Chemical, Plastics and Related Process Equipment. For more than 50 years. Federal Equipment Company has been a trusted name in the used pharmaceutical, chemical, plastics and related process equipment industry. As one of the world’s top equipment suppliers, Federal Equipment is dedicated to providing quality used equipment, outstanding service and competitive prices to meet the needs of the used pharmaceutical, chemical, plastics and related process equipment industries. | | | | | |(216) 441-9056 Mouse over image to view One(1) used 4.5" Davis Standard extruder model 45IN45. Electrically heated, air cooled, 30:1 L/D ratio, Vented barrel, 17.96:1 gearbox ratio, 200 HP DC motor with SCR controller, Serial# L5038, SO# 04182. Shipping Details: Since each item's and each customer's shipping needs are ... moreunique. Shipping costs and methods will vary by item and customer. Shipping details will be configured by our experienced team at time of purchase and verified with the customer before delivery. More Info Item Number: 41507. Size: 4.500 IN. Manufacturer: DAVIS-STANDARD. Location: CLEVELAND. OH. All items are F.O.B. Location and are sold AS IS. Please contact Joanne Parente at joanne@fedequip.com or call 216-441-9056 for more information. All descriptions are a reflection of the item to the best of our knowledge and are subject to change. © 2014 Federal Equipment Company 8200 Bessemer Avenue. Cleveland, OH 44127 Phone(216) 441-9056 | Fax 216.271.5210 | Email(Joanne Parente) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-147225be18a-0x120-
|
|
|
DAVIS-STANDARD MESA PACK PRO EXTRUDER CONTROL SYSTEM
ALL ITEMS START AT $3.99. CHECK OUT OUR OTHER AUCTIONS Inventory Number: 07141990029 Manufacturer: Description: DAVIS-STANDARD MESA PACK PRO EXTRUDER CONTROL SYSTEM Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full
|
|
|
1998 davis standard extruder, single screw, 75hp
1998 davis standard. Single screw, 75hp We have for sale a 1998 Davis Standard 100mm single screw extruder with a 75hp 460V motor. Model number 35MV350. Electrically heated. Air cooled. Screw is included. Serial number W0395. Eurotherm(2208) thermocouples are not included for more information call 819-469-096seven Shipping Details: Since each item's and each customer's shipping needs are unique. Shipping costs and methods will vary by item and customer. Shipping details will be configured by our experienced team at time of purchase and verified with the customer before delivery.
|
|
|
2.5" Davis Standard Extruder, Model 25IN25, 24:1 L/D, Air Cooled, 40 HP
Used 2.5" Davis Standard Extruder. Model 25IN25, 24:1 L/D, Air Cooled, 4 Barrel Zones, 40HP DC Reliance Motor, DC Reliance VS Drive, EAS 301 Control System, Pressure Readout, 17.28: Gear Box Ratio, 75hp Gear Box Capacity with 1.25 Service Factor, 42" Center line Height, with Clamp. 480/240/60/3 Machine Dimensions: 57" x 120" x 80" Machine Weight 6.500lbs
|
|
|
1.5" Davis Standard Plastic Extruder, Co Extruder 32:1
A utomated M anufacturing S ystems www.ams-plasticextrusions.com 5700 Columbia Circle West Palm Beach Florida. 33407 Davis Standard 1.5" Co Extruder 230V Machine. Also has 575V transformer on-board. 1. QTY(5) HEAT/COOL barrel zones. QTY(1) HEAT/ONLY die zones, including mercury relays, fuse protection and associated wiring and thermocouples 2. Motor STOP/START station. With Screw RPM and Motor Amp Displays and ten turn potentiometer. 3. 10 HP DC Motor 4. 10 HP DC Motor Control. 5. QTY(4) Barrel Blowers for Cooling. 6. High Temperature Barrel heaters 7. Digital Pressure display optional for additional charge. Mechanical Specifications and Hardware include the Following: 1. Approx 32 to 1 Bi-metallic Barrel 2. Flanged end or bolt on end will confirm. 3. New Screw. 4. Hopper Approximately 50 LBS. 5. Heavy Duty Double Reduction Gear Box. ... more6. Machine to be geared 0-120 Screw RPM. 7. 10000 PSI Rupture Disc. 8. Frame Mounted Control Panel. 9. Insulation and Barrel Cover. 10. Machine has new temperature controllers. Terms: Before shipment Terms. Ready for shipment. Payment in full prior to shipment. No paypal. Call for more specifications. 561 833 9898 Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
|
|
|
2.5" Davis Standard Model 25IN25 Single Screw Extruder, 24:1, Air Cooled, 40 HP
Used 2.5" Davis Standard Model 25IN25 Single Screw Extruder. 24:1, Air Cooled, 40 HP, Reliance Motor, With SSD DC Drive, 17.28 Gear Box Ratio, 5 Barrel Zones, 3 Die Zones, Screw RPM Gauge, Dynisco Pressure Transducer, With Clamp Barrel Measured To.001" S/N M0317 1991 Vintage 48" Width 100" Length 80" Height Weight 5.000 LBS Stock#8358
|
|
|
4.5" NRM Davis Standard Extruder PM III 32:1 / 4 1/2" plastic extrusion machine
FOR SALE WE HAVE A USED 4.5" NRM/ DAVIS STANDARD PACEMAKER PM III PLASTIC EXTRUDER. 32:1 L/D, 100 HP D/C MOTOR DIRECTLY COUPLED TO A 25.14 GEARBOX, WATER COOLED, 8 ZONE& VENTED BARREL, UNITIZED CONTROL PANEL WITH EUROTHERM 2208 ZONE CONTROLS- 12 ZONES TOTAL, PANEL INPUT IS 460V/3/60, 1999 MODEL YEAR. Sold as is Price includes loading onto a open flatbed truck from the Midwest. Used Plastics Equipment Sales Contact: Chris 847.778.5517 chris@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are ... morerequired prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007.
|
|
|
1996 Davis Standard 150 DS-20 EXTRUDER, PLASTICS
General Specifications: Screw Size: 1.5" L/D Ratio: 24:1 Screw Type: GP Cooled: Air Cooled Non-Vented Horsepower: 15 Reliance DM Motor Gear Box Ratio: 6.53:1 Equipped with: HES System 3-1 Material Ran: Turcite. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular ... morepurpose of any item
|
|
|
2" Davis Standard Extruder '85
2" Davis Standard Extruder Model: MARK V Year: 1985 Screw Diameter: 2" L/D Ratio: 24:1 Air Cooled Condition: Incomplete Missing: Screw* Motor* 3 Zones Controller With Clamp End Includes Manual
|
|
|
3 1/2" Davis Standard Extruder '00
3.5" Davis Standard Extruder Year: 2000 Model: 35IN35*Several Available Screw Diameter: 3.5" L/D Ratio: 24:1 Motor: 60 HP Voltage: 230/460 Air Cooled Missing: Screw* Drive Controller* 9 Zones Controller* Pressure Controller
|
|
|
2 1/2" Davis Standard Extruder '02
2.5" Davis Standard Extruder Year: 2002 Model: MV-25IN25*Several Available Screw Diameter: 2.5" L/D Ratio: 24:1 Motor: 40 HP Air Cooled Condition: Good*Missing Drive Control Location: Miami.FL
|
|
|
3 1/2" Davis Standard Extruder With Screen Changer
We are selling a Davis Standard 3 1/2" thermatic single screw extruder. It has seven heat zones. There are four heat and cool zones on the barrel. The barrel is air cooled and the throat is water cooled. The other three zones are heat only. There is one zone for the Xaloy screen changer. One for the adapter and one for the die head. All seven of the zones are electric heat. It has a ten hole strand die. The L/D ratio is approximately 30/1. The machine also does have a vent on the side of the barrel.When we bought the machine it did not have a screw. We had one made by American Screw and Barrel and it is a custom design. The machine also comes with an Xaloy hydraulic screen changer. It has the option to run breaker plates or not, however we do have two breaker plates that will come with the machine.The machine will come with the electrical ... morecabinet, screen changer, hydraulic tank and the barrel and screw assembly. It will NOT come with the platform, feeder or anything else in the pictures. The gearbox ratio is 17.39 at 100 RPMS. Transportation of the machine will be the responsibility of the buyer. We will disconnect the power to the machine as well as the control cabinet from the extruder control panel. We are looking to replace this machine with a twin screw.Buyer is responsible for all shipping.We may be able to help load if necessary.Any Questions you can Call Primary Colors inc at 508-887-8789 and ask for Tim. Thanks for looking
|
|
 |