|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$70.81 Shipping Condition: Brand New Location: Rozelle, Australia Grade: N45. Avoid use around people with pacemakers. Never use neodymium magnets near persons with these devices. Rare earth magnets are a special type ... moreof magnet. Types of magnets: There are 5 main types of magnets.
Condition: Used Location: Mount Vernon, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: For parts or not working Location: Clayton, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Post Falls, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: For parts or not working Location: Benicia, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. You only need to provide this ... moreinformation once. These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Post Falls, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Spartanburg, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: For parts or not working Location: Longwood, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Memphis, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Batavia, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Sulphur, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Broomfield, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. You only need to provide this ... moreinformation once. These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Durham, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
Condition: Used Location: Marissa, United States This JLG Ultra Boom 1200SJP Boom lift man lift is a powerful machine with a diesel power source and 2598 hours of use. This boom lift can be used for ... morea variety of tasks in the construction or industrial fields.
Buy It Now
Condition: Seller refurbished Location: Joliet, United States PLEASE DO NOT BID UNLESS YOU CAN PAY FOR THIS ITEM IN 4 DAYS. 2013 JLG 800AJ 4X4 DEUTZ DIESEL 80′ PLATFORM HEIGHT 86′ WORKING HEIGHT 51′ HORIZONTAL REACH ... more500 LB CAPACITY OSC AXLE SKYPOWER FOAM FILLED TIRES ARTICULATING NEW PREMIUM PAINT AND DECALS REAY TO WORK CONTACT US FOR COMPETITIVE FREIGHT RATES! YOU ARE VIEWING A 2013 JLG 800AJ. THE JLG 800AJ IS A 4X4 DIESEL ARTICULATING BOOM LIFT. THIS UNIT HAS A 80' PLATFORM HEIGHT, 86' WORKING HEIGHT AND A 51' HORIZONTAL REACH. THIS UNIT ALSO HAS SKYPOWER, OSC AXLE, FOAM FILLED TIRES AND NEW PREMIUM PAINT AND DECALS. THIS MACHINE IS 100% JOB READY CONDITION. THE UNIT HAS BEEN FULLY SERVICED AND INSPECTED. THIS UNIT RUNS AND OPERATES AS IT SHOULD. CONTROLS ARE SMOOTH AND RESPONSIVE WITH JLG'S BULLET PROOF CONTROLS.
Condition: Used Location: Decatur, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Albuquerque, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Phoenix, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Covington, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. You only need to provide this ... moreinformation once. These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Corpus Christi, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: New Orleans, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Covington, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Auburn, United States This item is located on Boeing property in Auburn, WA.
Condition: Used Location: Salt Lake City, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: West Valley City, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Medford, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Sicklerville, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Nazareth, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. You only need to provide this ... moreinformation once. These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Buy It Now
Condition: Used Location: Hollywood, United States The unit was part of our active rental fleet. The unit is being sold to make way for new 2024 models. Platform Height 63’7” (19.38 m). C Tailswing Zero. ... moreDiesel Engine 74 HP. Drive Speed (High speed) 4.5 mph (7.3 km/h).
Condition: Used Location: La Porte, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Alvarado, United States The photographs and any video shown are of the actual item (unless otherwise noted). We take pride in the products and services we provide.
Condition: For parts or not working Location: Knoxville, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Shreveport, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. You only need to provide this ... moreinformation once. These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Bedford, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: For parts or not working Location: Jacksonville, United States You only need to provide this information once. These costs include, but are not limited to, certificates and/or permits required to move the goods within ... moreor across state, province and/or country borders.
Condition: Used Location: Brunswick, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Suwanee, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: San Jose, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
Condition: Used Location: Miami, United States / 83.28 L -Engine Type - Diesel: Deutz D2.9L4 -Tier 4 Final -49 hp 36.4 kW -Drive Speed - 4WD 3.8 mph / 6.12 km/h -Platform Capacity - Restricted 750 ... morelb / 340.19 kg -Platform Capacity - Unrestricted: 550 lb / 249.48 kg -Swing: 360 Degrees -Turning Radius - Outside (2WS) 17 ft 7 in.
Condition: Used Location: Suwanee, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Buda, United States The photographs and any video shown are of the actual item (unless otherwise noted). We take pride in the products and services we provide.
Condition: Used Location: Taylor, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Kent, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Wichita Falls, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Midland, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Baton Rouge, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Altoona, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Athens, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Fresno, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Fresno, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Monroe, United States This machine was in a rental fleet. Make: Genie. Year: 2015. Drive Type: 4WD. Transport Weight: 12,600 lbs. Boom Wear Guides JJJ. Fuel Type: Diesel. Travel ... moreSpeed: 4.8 mph.
Condition: Used Location: Kent, United States Repairs are necessary for it to operate and run as intended. Can be started with a screwdriver but will not stay running. As of January 1, 2021 for vehicle ... moremodels 2011 or newer, the exemption is 20 years.
Condition: Used Location: Alvarado, United States The photographs and any video shown are of the actual item (unless otherwise noted). We take pride in the products and services we provide.
Condition: Used Location: Henderson, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: San Diego, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Oswego, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: For parts or not working Location: Colorado Springs, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. These costs include, but are ... morenot limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Buy It Now
Condition: Used Location: Georgetown, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Madison, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Port Allen, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
|
|
|
|
Boring Mill Table Type Horizontal 4" Union Model BFT90/3 (1990)
4" Union Model BFT90/3 Table Type Horizontal Boring Mill(1990) Specifications Spindle Diameter: 4" Taper in spindle: 40, Cross Travel(X-Axis) 63" Vertical Travel(Y-Axis) 49" Longitdunal Travel(Z-Axis) 63" Spindle Outfeed Travel(W-Axis) 28" Spindle Speeds: 1600 RPM, Table Size: Rotary: 55" X 49" Equipped With: 55" X 49" Built in Power Rotary Table Facing Head Full Pendant Control Hardened& Ground Ways Stainles Steel Way covers, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
Boring Mill Horizontal Table Type 4" Scharmann
4" Scharmann Table Type Horizontal Boring Mill Specifications Diameter of spindle bar: 4" Table area: 66" x 51" X-Axis Cross Travel: 72" Y-Axis Vertical Travel: 72" Equipped with: 66" x 51" Built in Rotary Table. Facing Head 30" Capacity, Machine being sold As Is. Buyer pays for loading. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
Hitachi Seiki Horizontal Mill Center Type MG 500
Fanuc 7M Control 50 Taper Table 20" X 20" Index 5 degree Spindel motor 12 HP speed 30-3150 RPM 220/440V X=27.5" Y=23.5" Z=23.5" Approximate Weight 15000lb
|
|
|
Cincinnati-Milacron"Dual-Power" Dial Type Plain Horizontal Mill Quote# 26837
Quote# 26837. PLAIN HORIZONTAL MILL New 1952. Serial No 3J4P1Z-9, Model 4, Ltr OD. Series"DUAL-POWER" EQUIPPED WITH: Anilam Wizard 2-Axis Digital Readouts 30 HP Spindle Motor Front& Rear Controls Wide Knee Design(2) Arbor Supports- Extra Arbors Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 18" x 80" Table Working Surface. W x L. 18" x 80" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid ... moreTraverse. Vertical. 37.5 IPM. Spindle Motor. Horsepower. 30 HP. Floor Space Required. W x D. 15'3" x 11'10" Overall Height. 6'8" Weight. Approximately. 11000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $6.950.00. All machines/equipment subject to prior sell.
|
|
|
330-18 CINCINNATI-MILACRON "VERCIPOWER" BED-TYPE HORIZONTAL MILL - #26675
Quote#26675#330-18 CINCINNATI-MILACRON"VERCIPOWER" BED-TYPE HORIZONTAL MILL w/VERTICAL-HEAD ATTACHMENT New 1970. S/N 311031H5W-2, Model 320-18, Ltr DK, EQUIPPED WITH: Heavy-Duty Vertical Spindle Head Attachment Front& Rear Controls Power Take-Off on Table Knee Motor CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 18" x 72" Table Working Surface. W x L. 18" x 72" Table Longitudinal Travel(X-Axis) 34" Saddle In-Out Cross Travel(Z-Axis) 12" Knee Vertical Travel(Y-Axis) 22" Spindle Taper. 50 NSTD(24) Main Spindle Speeds. Range. 16 to 1600 RPM Vertical Spindle Speeds. Range. 70 to 2240 RPM(32) Longitudinal and Cross Feeds. 3/8 to 90 IPM(32) Vertical Feeds. Range. 3/16 to 45 IPM Power Rapid Traverse. Long& Cross. 150 IPM Power Rapid Traverse. Vertical. 75 IPM Spindle Motor. Horsepower. ... more30 HP Vertical Spindle Motor. Horsepower. 10 HP Feed Motor. Horsepower. 7.5 HP Electrical System. 220-440/3/60 Floor Space Required. W x D. 11'4" x 10'9" Weight. Approximately. 17000 LBS PRICE: F.O.B. OUR WAREHOUSE. $14.500.00. Machinery/Equipment Subject to Prior Sale. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13fd03720bb-0xec-
|
|
|
5.9" MITSUBISHI "MAF-RS 150B NC" 4-AXIS FLOOR-TYPE HORIZONTAL BORING MILL-#26610
QUOTE 26610. 5.9" MITSUBISHI CNC 4-AXIS FLOOR-TYPE HORIZONTAL BORING MILL New 1987/2002. Serial No G546500, Model MAF-RS 150B NC TO VIEW VIDEO: EQUIPPED WITH: Fanuc 12M CNC Control Tool Life Management- Tool Life Measurement Mitsubishi Auto Pallet Changer With(2) 118" x 83" Contouring Rotary Tables 80-Station Automatic Tool Changer For Spindle Right Angle Head. Auto Indexing RH15M Right Angle Head. Auto Indexing RH15LS Universal Angle Head 3-Station Automatic Attachment Changer 60-Station Automatic Tool Changer For Attachments Automatic Attachment 90 Degree Indexing Thru Spindle Coolant& Flood Coolant System Spindle Air Blower System- Spindle Orientation Power Operators Platform- RS232 Port Ball Screws& DC Servo Drives- Hardened& Ground Ways Steel Sliding Way Covers- Full Length Chip Conveyor CATALOGUE SPECIFICATIONS: ... moreSpindle Diameter. Main Spindle. 5.9" Spindle Diameter. Milling. 8.26" Spindle Taper. 50 Cat Boring Spindle Thrust. Max. 6,600 LBS. Spindle Travel. W-Axis) 35.43" Headstock Travel Horizontal. Z-Axis) 27.56" Column Longitudinal Travel(X-Axis) 236" Spindle-Head Vertical Travel(Y-Axis) 118" Headstock& Spindle Travels(Z-Axis) 62.99" NEW PAGE- Spindle Speeds(Main) Range. 8 to 1800 RPM Milling Feeds. Range. 0.04 to 157.48 IPM Rapid Feeds. Range. 393.70 IPM Pallet Load Capacity. 44.000 LBS. Pallet Cross Travel. V) 59" Spindle Motor. Horsepower. 40/50 HP Floor Space. 614" L-R x 364" F-B Overall Height. 249.21" Weight. 90.390 LBS. Note: This Machine Had A Complete Maintenance Overhaul In 2002 Which Included A New AC Spindle Drive PRICE: F.O.B. OUR WAREHOUSE. $395.000.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
5.12" TOSHIBA/SHIBAURA "BFT13CW2" TABLE-TYPE HORIZONTAL BORING MILL - #27037
QUOTE# 27037. 5.12" TOSHIBA/SHIBAURA TABLE-TYPE HORIZONTAL BORING MILL New 1974. Serial No 2672, Model BFT13CW2 EQUIPPED WITH: Full Pendant Control 3-Axis Anilam Wizard Digital Readouts Steel Sliding Way Covers 4-Way Bed Construction Hardened Ways 25 HP Spindle Motor CATALOGUE SPECIFICATIONS: Spindle Diameter. Main. 5.12" Spindle Diameter. Milling. 8.86" Spindle Taper. 50. Spindle Travel. Main(Z-Axis) 35.4" Table Cross Travel(X-Axis) 98.42" Spindle-Head Vertical Travel(Y-Axis) 59.1" Saddle In/Out Travel(W-Axis) 51.2" Table Dimensions. W x L. 47.2" x 98.4" 27) Spindle Speeds. Range. 20 to 1500 RPM. 54) Spindle Feeds. Range. 0001 to 1.73 IPR. Spindle Motor. Horsepower/RPM. 25 HP/1765 RPM. Floor Space Required. W x D. 21'9" x 20' Overall Height. 13'9" Weight. Approximately. 60280 ... moreLBS. NOTE: Rotary Table Is Available At Extra Cost. See Our Quote Number#27038. PRICE: F.O.B. ON WAY IN. $79.500.00. ALL ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
CINCINNATI-MILACRON"DUAL-TYPE" PLAIN HORIZONTAL MILL MDL 420-16 QUOTE #26914
QUOTE#26914. 420-16 CINCINNATI-MILACRON"DIAL-TYPE" PLAIN HORIZONTAL MILL Serial No 4A4P5S-3. Model 420-16, Ltr LL, Series"DIAL-TYPE" EQUIPPED WITH: Front and Rear Controls Motor On Knee Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 16.25" x 79.25" Table Working Surface. W x L. 16.25" x 79.25" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Knee Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 37.5 IPM. Spindle ... moreMotor. Horsepower. 20 HP. Feed Motor. Horsepower. 5 HP. Floor Space Required. W x D. 9'8" x 11'10" Weight. Approximately. 10300 LBS. PRICE: F.O.B. OUR WAREHOUSE. $7.950.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
B100L 4" WOTAN TABLE-TYPE HORIZONTAL BORING MILL #27094
27094. 4" WOTAN TABLE-TYPE HORIZONTAL BORING MILL Serial No 52-341. Model B100L EQUIPPED WITH: Outrigger Runway Supports for Table& Saddle Main Spindle Support Rapid Traverse Pendant Control CATALOGUE SPECIFICATIONS: Spindle Diameter. Main. 4" Spindle Taper. 50 Spindle Travel. Main(W-Axis) 28" Table Cross Travel(X-Axis) 60" Spindle-Head Vertical Travel(Y-Axis) 47" Saddle In/Out Travel(Z-Axis) 57" Table Dimensions(Overall) W x L. 40" x 68" Spindle Speeds. Range. 14 to 1600 RPM Spindle Feeds. Range. 0013 to.500 IPR Main Motor Horsepower. 25 HP Weight Approximately. 25000 LBS PRICE: F.O.B. ON WAY IN. $29.500.00. ALL MACHINE/EQUIPMENT SWUBJECT TO PRIOR SELL.
|
|
|
Scharmann CNC Floor Type Horizontal Boring Mill
1 Used 6” Scharmann Floor Mill. Model: Ecocut. S/N: 225002. Reconditioned; 2008 Refitted w/New Heidenhain Controls 2010. In Plant; Under-Power in Windsor. Ontario operation, producing Quality Parts. TRAVELS: X– 236” Y– 78” Z– 36” Column) W– 36” Spindle) Rotary Table: Size 78” x 78” Programed. Infinitely adjustable full 360 degree. Automatic. Load Capacity– 25.000kg(55,115 lbs. Spindle: RPM: 0– 2000. 50 Taper. Head: Universal Adjustable Angle. RPM: 0- 2000. Control: Heidenhain I TNC 530. New 2010. Machine is under power and in excellent condition. Payment in full before removal.
|
|
|
GIDDINGS & LEWIS MODEL 70-H6-T 6" CNC TABLE TYPE HORIZONTAL BORING MILL
GIDDINGS& LEWIS MODEL 70-H6-T 6" CNC TABLE TYPE HORIZONTAL BORING MILL GE FANUC 18mi-a 5-AXIS CNC CONTROL- RETROFIT 1999. INTERFACE FOR B-AXIS ROTARY TABLE CONTINUOUS 360.000 DEGREE FANUC HIGH TORQUE RED CAP AC DRIVE SERVO MOTORS w/ NEW BALLSCREWS(3-AXIS) SPINDLE DIAMTER: 6" SPINDLE TAPER: 50 TABLE SIZE: 60" x 120" HEAD TRAVEL: 84" TABLE CROSS TRAVEL: 108" SADDLE TRAVEL: 60" SPINDLE TRAVEL: 38" SPINDLE SPEEDS: 5- 1020 RPM POWER DRAW BAR COOLANT SYSTEM CHIP CONVEYOR HARDENED REPLACEABLE WAYS ON ALL 3-AXIS OPERATION AND PROGRAMMING MANUALS FOR MORE INFORMATION CONTACT GARY@ 949-246-2978 or email:
|
|
|
5" LUCAS "542B60" TABLE-TYPE HORIZONTAL BORING MILL - #27095
QUOTE 27095. 5" LUCAS TABLE-TYPE HORIZONTAL BORING MILL New 1970. Serial No 42B4303, Model 542B60 EQUIPPED WITH: SWI"Trak 103" 3-Axis Digital Readout Power Tool Ejector- Spindle Support 4-Way Bed Design Flame Hardened Bed& Saddle Ways Pendant Control w/Preselect Feed& Speed Changes Power Rapid Traverse- Horsepower Load Meter CATALOGUE SPECIFICATIONS: Spindle Diameter. 5" Spindle Taper. 50. Spindle Travel. Main(W-Axis) 36" Table Cross Travel(X-Axis) 60" Spindle-Head Vertical Travel(Y-Axis) 60" Saddle In/Out Travel(Z-Axis) 77" Spindle-Face to Outboard Support. 96" Table Dimensions(Overall) W x L. 48" x 74" 26) Spindle Speeds. Range. 10 to 1220 RPM. 42) Spindle Feeds. Range. 0001 to 1.038 IPR. Power Rapid Traverse. 112 IPM. Main Motor. Horsepower/RPM. 25 HP/1750 RPM. Bed Width. Across ... moreWays. 60" Bed Length. 12' Overall Dimensions. L x D. 18'4" x 8'2" Overall Height. 10'10" Weight. Approximately. 47500 LBS. PRICE: F.O.B. OUR WAREHOUSE. $44.500.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1440c44ce96-0x102-
|
|
|
4.33" WOTAN "RAPID O" CNC TABLE -TYPE HORIZONTAL BORING MILL - #27117
QUOTE# 27117. 4.33" WOTAN CNC TABLE-TYPE HORIZONTAL BORING MILL New 1990. Serial No 135792, Model Rapid O EQUIPPED WITH: Fanuc#OM-A CNC Control Built-In 31.5" x 31.5" Rotary Milling Table Right Angle Milling Head Attachment Hydro-Mechanical Power Draw Bar Telescopic Way Covers Jorgensen Chip Conveyor CATALOGUE SPECIFICATIONS: Spindle Diameter. 4.33" Spindle Taper. 50 ISO Fixed Spindle Extension. 7.87" Column Longitudinal Travel(W-Axis) 31.5" Table Cross Travel(X-Axis) 49.21" Spindle-Head Vertical Travel(Y-Axis) 39.37" Rotary Table Working Surface. W x L. 31.5" x 31.5" Table Load. Maximum. 3304 LBS Spindle Speeds. Range. 12.5 to 3200 RPM Feeds Range Variable(W.X,Y-Axis' 04 to 196.9 IPM Feed Range Rotary Table(B-Axis) 1 to 770 DEG/MIN Rapid Traverse(W.X,Y-Axis' 393.7 IPM Rotary Table ... moreRapid Traverse(B-Axis) 3 RPM Column Bed Width. 37" Table Bed Width. 28" Spindle Motor. Horsepower. 32 KW Overall Dimensions. L x W. 143.5" x 153.5" Overall Height. 128" PRICE: F.O.B. OUR WAREHOUSE. $34.500.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
CNC Horizontal Boring Mill 5" Giddings & Lewis Model 65-H5-T Table Type
You are bidding on our VERY VERY NICE 5" Giddings& Lewis Model 65-H5-T Table Type CNC Horizontal Boring Mill Call or email us with any questions or to receive our video. 773-866-9600 Mark. Gregg, Scott, Steven or Manny or simply email: sales@assetexchangeinc.com 5" Giddings& Lewis Model 65-H5-T Table Type CNC Horizontal Boring Mill 5" Diameter Spindle. 84" Cross, 72" Vertical, Camsoft CNC Control Specifications(Preliminary) Spindle Diameter: 5" X Axis Cross Travel of Table: 84" Y-Axis Travel Vertical Head: 72" W Axis Table Longitudinal Travel" 48" Z-Axis Travel Spindle Out feed: 36" Spindle Speeds: 5.6- 1200 RPM, Main Motor Drive: 50 HP, Equipped with: Camsoft PC Based 3D CNC Control(G CODE) Built in Conversational Programming System. CAM CAD Programming/ Master CAM and Auto CAD, ... moremQuick Change Sandvik Coromant"CAPTO" System Installed in 2012, Misc Tool Holders Included, 60" x 60" Rotary Table(Manual) 2) Angle Plates(1) 60" x 24" 1) 44" x 24" Contact Us Call for more information: 773-866-9600. Ask for Mark. Scott, Steven or Manny, Click for video: Contact us at 773-866-9600 or sales@assetexchangeinc.com to receive more information!
|
|
|
420-16 CINCINNATI-MILACRON "DIAL TYPE" "LL" PLAIN HORIZONTAL MILL - #26914
QUOTE# 26914. 420-16 CINCINNATI-MILACRON"DIAL-TYPE" PLAIN HORIZONTAL MILL Serial No 4A4P5S-3. Model 420-16, Ltr LL, Series"DIAL-TYPE" EQUIPPED WITH: Front and Rear Controls Motor On Knee Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 16.25" x 79.25" Table Working Surface. W x L. 16.25" x 79.25" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Knee Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 37.5 IPM. Spindle ... moreMotor. Horsepower. 20 HP. Feed Motor. Horsepower. 5 HP. Floor Space Required. W x D. 9'8" x 11'10" Weight. Approximately. 10300 LBS. PRICE: F.O.B. OUR WAREHOUSE. $7.950.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144c5e62dfa-0x109-
|
|
|
NICHOLS SEMI AUTOMATIC PRECISION KNEE TYPE HORIZONTAL PRODUCTION MILL
12SA. Semi Automatic Precision Knee Type Horizontal Production Mill, Max. 2875 Rpm Brand: Nichols/Dehoff Model: 12SA Year: 1984 Wiring: Wired for 220V can be wired for 460V SEMI AUTOMATIC PRECISION KNEE TYPE HORIZONTAL PRODUCTION MILL• Working Surface of Table- 8-13/16" x 36" 20" Horizontal Table Travel• 4-1/2" Rise& Fall of Spindle• Spindle Speeds(16)60 to 2875 RPM• 40 Taper• Table Rapid Traverse to 400"Min• Gould Variable Speed DC Motor Driven Ball Screw Table Feed• Gould Microprogrammer for Table Cycle• Arbor Support& Overarm• Pushbutton Controls• 3HPMachine
|
|
|
4.3" FEMCO BMC-110R2 CNC Tbl TYPE HORIZONTAL BORING MILL, w/FANUC 18MC, LOW HR
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 4.3" FEMCO BMC-110R2 CNC Tbl TYPE HORIZONTAL BORING MILL. W/FANUC 18MC, LOW HR Ref# 152877 iammdna XHBMNC 4.3" FEMCO CNC TABLE TYPE HORIZONTAL BORING MILL MODEL: BMC-110R2. S/N: B730992 SOLD ... moreNEW AND INSTALLED AUGUST 2004 SPECIFICATIONS: SPINDLE DIAMETER. 4.3" SPINDLE TAPER. CAT 50 SPINDLE MOTOR. 35 HP SPINDLE SPEEDS(2 GEAR RANGES) 5 TO 2.500 RPM X-AXIS TRAVEL(TABLE CROSS TRAVEL) 79" Y-AXIS TRAVEL( HEADSTOCK TRAVEL) 71" Z-AXIS TRAVEL(TABLE SADDLE TRAVEL) 67" W-AXIS TRAVEL(SPINDLE IN AND OUT) 21.6" TABLE SIZE(BUILT IN B-AXIS ROTARY) 56.7" X 63" MAXIMUM TABLE LOAD. 13.889 LBS TABLE INDEXING(B-AXIS) 360.000 DEGREES AUTOMATIC TOOL CHANGER CAPACITY. 32 TOOLS CONTROL AXIS/SIMULTANEOUS CONTROL AXIS. 5/4 MACHINE DIMENSIONS. 257" X 216" X 146.6" TALL MACHINE WEIGHT. 42.000 LBS. EQUIPPED WITH: FANUC 18-MC CNC CONTROL. BOX WAYS. LINEAR SCALES ON X.Y& Z AXIS. CHIP CONVEYOR. BUILT IN B-AXIS ROTARY TABLE WITH ROTARY SCALE. REMOTE PULSE GENERATOR. VIDEO: LOW HOURS: ONLY 3.137 CUTTING HOURS MACHINE IS COMMING OUT OF A MACHINE TOOL BUILDER AND WILL BE MOVED 7/8/14. CALL FOR PRE-REMOVAL PRICING Machine Location: HARRISON. NJ Click Here For More Femco Machines Click Here For More Boring Mills- CNC TABLE TYPE HORIZONTAL BORING M
|
|
|
Wotan Iberico W75 3" Table Type Horizontal Boring Mill, www.assetexchangeinc.com
Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com for more information and quotation on this impressive Horizontal Boring Mill with built in rotary. 3" Wotan Iberico W75 Table Type Horizontal Boring Mill 3" Spindle. 40 Taper,m Way Covers, Mitutoyo 3 axis digital readout Specifications(Preliminary) Diameter of Spindle Bar: 2.95" Table Area: 31.5" x 39.5" built in rotary) X Axis Travel: 31" Y-Axis Travel: 55" Z-Axis Travel: 55" Taper: 40, Spindle Speeds: 12- 1000 RPM, Equipped with: Pendant Control. Mitutoyo Digital Readout, Way covers, di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-147701e4cf9-0x109-
|
|
|
Lucas 4" 42B-60 Horizontal Boring Mill Table Type Digital Read Out
Lucas 42B-60 Horizontal Boring Mill This Machine is in beautiful condition. Still under power in facility. It is possibly one of the nicest machines of this era around. Specifications SPINDLE DIAMETER 4" TABLE SIZE 74" x 40" TABLE CROSS TRAVEL 60" SADDLE TRAVEL 76" SPINDLE HEAD TRAVEL 48" SPINDLE QUILL STROKE 36" SPINDLE TAPER MT#6 SPINDLE MOTOR 20 HP SPINDLE SPEEDS(26) 9- 1200 RPM FEEDS(81) 0.0001- 1.038 IPR APPROX DIMENSIONS 216" x 110" x 116" MACHINE WEIGHT 35.000 LBS Equipped With: DIGITAL READOUT PENDANT CONTROL FACING HEAD For More Info Or To Inspect Under Power Please Call Maury Cohn 1 800 888 4312 Press. Minter, Clearing Nigara, bridgeport, Haas, Makino, Cincinnati, CNC.Vertical,Mazak,Giddings,
|
|
|
4.3" TOSHIBA/SHIBAURA BFT-11BW TABLE-TYPE HORIZONTAL BORING MILL - #27279
4.3" TOSHIBA/SHIBAURA TABLE-TYPE HORIZONTAL#27279 BORING MILL Serial No 2234. Model BFT-11BW EQUIPPED WITH: Pendant Control Power Rapid Traverse CATALOGUE SPECIFICATIONS: Spindle Diameter. Main. 4.3" Spindle Taper. 6 MT Milling Spindle Diameter. 8.8" Spindle Travel(W-Axis) 35.4" Table Cross Travel(X-Axis) 78" Spindle-Head Vertical Travel(Y-Axis) 47.25" Table Dimensions. W x L. 47.25" x 84.75" 27) Spindle Speeds. Range. 9 to 1200 RPM Spindle Feeds. Range. 0001 to.8889 IPR Table Load Capacity. 22000 LBS Motor Horsepower. 20 HP Weight Approximately. 45000 LBS PRICE: F.O.B. OUR WAREHOUSE. $24.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
|
Hitachi Seiki Horizontal mill Type 3ML-P 13" x 63" table 50 taper
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is this Hitachi Seiki Horizontal mill Type 3ML-P 13" x 63" table 50 taper. Item needs an on/off safety switch. Item powers up. Spec: sn/ N-6862. 200/220/440v, 3ph. Buyer is responsible for all shipping costs. Item weight is approx, 10000 lbs. Local pick up or delivery is available,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1494287072c-0x112-
|
|
|
Toshiba BTD-110.R16 4.33" CNC Table Type Horizontal Boring Mill
Specification Description Spindle Diameter, 4.33" Taper in Spindle, 50, Milling Spindle Diameter, 8.86" Vertical Travel of Headstock. Y-Axis, 70.86" Table Cross Tavel. X-Axis, 98.42" Spindle Travel. Z-Axis, 19.68" Saddle Travel. W-Axis, 57.08" Spindle Speeds, 5-3000 RPM, Spindle Motor, 40/30/ HP, Table Size. Built-In Rotary, 55.12" x 62.99" Table Index, 0.001 Degree, Table Capacity, 13.860 lbs. Feed Rates, 0.04"236.2" Rapid Traverse, 472 IPM, Floor Space. L x W, 248.4" x 201.9" Overall Height, 157.5" Machine Weight, 61.600 lbs. Equipped With: Tosnuc 888 CNC Control*Helical Interpolation& Synchronous Tapping*60 Station Automatic Tool Changer*55.12" x 6299" B-Axis Rotary Table*4-Way Bed Construction*Way Covers*Coolant System*Thru-Spindle Coolant*Flood Coolant*Extended ... moreTravels On X& Y Axes*Chip Conveyor*40 HP/30 HP Spindle Drive Motor
|
|
 |