|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Archbold, United States Manufacturer: Hurco.
Buy It Now
Condition: Used Location: Waukesha, United States MAKE. HURCO. TOOL CHANGER. 16 ATC. X AXIS TRAVEL. 26". Y AXIS TRAVEL. 14". Z AXIS TRAVEL. 18". TABLE SIZE. 26" X 16" X 14". SPINDLE MOTOR. 10 HP.
Buy It Now
$5.32 Shipping Condition: Used Location: Troy, United States OPERATION MANUAL. EVERYTHING NEEDED OPERATE A HURCO AUTOBEND
Buy It Now
$91.33 Shipping Condition: Used Location: Hopkins, United States HURCO 4 AXIS CHUCK. VICTOR 3 JAW KOBAYASI E191, TC165F. W/ CHUCK KEY.
Buy It Now
Condition: For parts or not working Location: Round Rock, United States Hurco VM1, not currently running. Tool Changer is currently stuck (see picture). Spindle Bearing is noisy, could be going out but we have been running ... moreslow for a couple years and it has been doing just fine.
Buy It Now
Condition: Used Location: Harrison, United States HURCO CNC MACHINING CENTER. RAPID TRAVERSE RATE (X&Y AXIS). X-AXIS TRAVEL. . 26". RAPID TRAVERSE RATE Z-AXIS. 500 IPM. AUTOMATIC TOOL CHANGER CAPACITY. ... more16. Z-AXIS TRAVEL. . 18".
Buy It Now
$9.95 Shipping Condition: Used Location: Houston, United States Conversational Programming Manuals for Hurco Machining Center
Buy It Now
$8.60 Shipping Condition: New Location: Lawrenceville, United States Replacement for HURCO Trackball on all Ultimax II. Ultimax 3& Max 4 controls. All electonic with no wearable parts like the trackball. This should ... morebe the last time you ever replace the trackball. Please note which control you have, Max2 or Max3 or Max4 as they are different Joysticks.
Buy It Now
Free Shipping Condition: New Location: Hudson, United States Drop the inlet into the tank, plug the pump in and its ready to wash. The pump is a self priming water pressure diaphragm pump. When you squeeze open ... morethe nozzle, the pump turns on. When the nozzle is closed the pump turns off.
Buy It Now
Free Shipping Condition: Used Location: North Charleston, United States It is designed to handle rigorous tasks and features a durable construction from quality materials.
Buy It Now
Condition: Used Location: San Diego, United States 2007 Hurco VMX30 CNC Mill. Could use new X-axis thrust bearings soon, but holds tolerances withing a few tenths and interpolates a circle within tenths ... moreas well.
Buy It Now
$11.75 Shipping Condition: New – Open box Location: Bosque Farms, United States We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. ... moreIf one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Copiague, United States This data is available to anyone using Hurco LiquiSmoke. Condition is Used. As the temperature rises, so does the pressure, and the combination results ... morein nearly a 100% burn of the LiquiSmoke, resulting in dense smoke.
Buy It Now
$22.58 Shipping Condition: Used Location: Independence, United States Hurco 415-0179-003 REV E with chassis and boards. Condition is Used. Shipped with UPS Ground.
Buy It Now
$23.27 Shipping Condition: Used Location: Rolla, United States Removed from a Hurco knee mill that was retrofit. ELECTRO CRAFT E703 USED PERMANENT MAGNET SERVO MOTOR E703 703-02-089 MODEL NO. CUSTOMER PART NO. E703 ... more401-4003-003 PART NO. 7-32701
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: Used Location: Watertown, United States Champion Machinery. Inc. Quote Charlotte. NC(803)548-8000 Chicago. IL(630)584-8885 2003 HURCO VM-1 Travel: X-Axis 26" Y-Axis 14" Z-Axis 18" ... moreTable Size 30" x 14" Spindle Speed 0- 8000 RPM Spindle Taper Cat 40 Spindle Nose to Table Top 4" 22" Spindle Motor 15/ 10 HP Spindle Torque 54.3 ft. lbs. Tools 16 Tool Change Time(T-T/C-C) 3/ 8 Seconds Table Load Capacity 750 lbs. Rapid Traverse Rates 750 IPM Max Tool Diameter 3.5" 5" Max Tool Length 9.8" Max Tool Weight 15.5 lbs. Machine Dimensions(L x W x H) 97.6" x 74.8" x 95.5" Machine Weight 6825 lbs. FEATURES: HURCO MAX CNC CONTROL Serial Number VM1-06017123BEA 12" Color LCD 3.5" Floppy Disc Drive Conversational& NC(G-Code) Programming Rigid Tapping Touch Screen Advanced Graphic Display Flood Coolant System 16 Position Side Mount Tool Changer Full Enclosure Mfg Date December 2003 Viewing this quote requires acceptance of our.
Buy It Now
$16.40 Shipping Condition: New Location: Portland, United States Hurco VM1 CD Documentation Manuals Parts and Wiring Diagrams ...NEW Thanks
Buy It Now
Condition: Used Location: Pomona, United States X, Y, Z Axis Travels: 50 x 20 x 20 in (1270 x 508 x 508 mm). Rapid Traverse X,Y,Z Axis: 1102 in/min (28 m/min). Does not include 4th Axis Rotary Table ... more. Table Size: 52 x 20 in (1,321 x 508 mm). Max Tool Weight: 15.4 lb (7 kg).
Buy It Now
Condition: Used Location: Fort Mill, United States Max Swing Over Bed / Carriage. Spindle Nose. Chuck Size. Sub Spindle Travel. Spindle Motor. Spindle Speed. Programmable Sub Spindle. Max Turning Length.
Buy It Now
$10.75 Shipping Condition: New Location: Lawrenceville, United States HURCO Suppressor Brd 415-0188-001, 414-0027-002. New Replacement. MB1, MB2, MB3, OLDER HURCO'S. This is a direct BOLT IN replacement with new wires, COMPLETE. ... moreBEWARE: Used boards have little to no life left. They explode due to age not malfunction of machine. Can cause fire and additional damage.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: VMX 64/40T. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining ... moreCenters. CNC Lathes. CNC Plasmas. Okuma MB-46VAE-R CNC Vertical Machining Center w/ 4th Axis.
Buy It Now
Condition: Used Location: Middlebury, United States Collet lock works good. Prefer to pick it up yourself?. Tested and works as it should. Manual operation everything works. implied or. Unless otherwise ... morespecifically agreed to in writing by. BULLSEYE INDUSTRIAL SALES, LLC.
Buy It Now
Condition: Used Location: Woodruff, United States MANUFACTURE: HURCO. MFG.NO: B30-0146.
Buy It Now
$15.00 Shipping Condition: New Location: Fullerton, United States Hurco& Webb Bando VS Vari/Variable Speed Drive Belt 975VC3830 100% Made in Taiwan Fits Hurco& Wilton Mills Total Length: 975mm Depth: 38mm Angle: ... more30 °(15° on each side. Top and bottom) Please verify your existing belt number before ordering. Please call us if you have any question at 714-632-9701. Info@aceronline.net You can pick up from Anaheim. California or Piscataway, New Jersey or we will ship via UPS Ground. Anaheim Office 1062 N. Kraemer Place Anaheim. CA 92806 Piscataway Office 244 N. Randolphville Road Piscataway. NJ 08854 www.aceronline.net Payment Supra Machine Tool accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. Please send payment to 1062 N. Kraemer Place, Anaheim, CA 92806) All payments must be received within 7 business days. Bidders can call 714-632-9701 or info@aceronline.net for further information. All buyers residing in California add 8.75% sales tax. Shipping and Handling Buyer pays the Shipping charge based on UPS Ground Shipping Charges. Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual shipping charge + $5.50-$7.50 handling fees. International shipments of 150 lbs or more can be made by Skyworld International. Buyers are responsible for payment of all Shipping and Handling charges on all items. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amoun
Buy It Now
Condition: Used Location: Warminster, United States F.O.B.: Ivyland, PA – Disconnected, Prepped for. Chip Conveyor. Weight: 14,980 LBS. Footprint: 182.4 x 147.1 in (4572 x 3680mm). Machine Hours: 38,000.
Buy It Now
Condition: Used Location: Watertown, United States Hurco BMC-30M CNC Vertical Machining Center– 1998 X-Axis.30" Y-Axis.18" Z-Axis.24" Table Size.40.1" x 15.7" Spindle Speed.0- ... more8.000 RPM Main Motor.10 HP Spindle Taper.CAT 40 Tools.24. Spindle Nose to Table Top.6" 30" Table Load Capacity.1.100 lbs. Rapid Traverse Rates(X&Y/Z)590/ 393 IPM Tool Change Time(T-T/C-C)7/ 11 Seconds Max Tool Diameter.3.9" Max Tool Length.12" Max Tool Weight.15 lbs. Power.240volts/60hz Full Load KVA.20 KVA Largest Motor KVA.7.5 Machine Dimensions(L x W x H)102" x 108" x 98" Machine Weight.8.200 lbs. Equipped With: Ultimax Dual Control Link to watch video: http:youtu.be/yrJl91nbX9A Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
Buy It Now
Free Shipping Condition: New Location: Windom, United States
Buy It Now
Condition: Used Location: Cincinnati, United States HURCO VM-1 CNC VERTICAL MACHINING CENTER. 2007 Hurco VM-1 Vertical Machining Center Demo. Z-Axis (Vertical Travel) 18". X-Axis (Longitudinal Travel) 26". ... moreSpindle Taper CAT 40. Table Size 30" x 14". Automatic Tool Changer Capacity (ATC) 16.
Buy It Now
Condition: Used Location: Harrison, United States HURCO CNC MACHINING CENTER. X-AXIS TRAVEL. . 40". SPINDLE TAPER. . 40 CAT. TABLE SIZE. . 46" x 18". Y-AXIS TRAVEL. . 20".
Buy It Now
Condition: Used Location: Harrison, United States HURCO CNC MACHINING CENTER. RAPID TRAVERSE RATE (X&Y AXIS). X-AXIS TRAVEL. . 26". RAPID TRAVERSE RATE Z-AXIS. 500 IPM. AUTOMATIC TOOL CHANGER CAPACITY. ... more16. Z-AXIS TRAVEL. . 18".
Buy It Now
$5.35 Shipping Condition: New Location: Chesnee, United States Made from brass 15mm ball to 1/4 loc line coolant nozzle. A must have on long to hard to reach tools. A standard fit on okuma cnc lathes or any machine ... morethat except a 15 mm ball cooling nozzle. Will offer free shipping with purchase of 10 or more pieces. Loc line not included. Please request invoice for combine shipping.
Buy It Now
Condition: Used Location: Warminster, United States Used 2008 Hurco VM10. F.O.B.: Ivyland, PA – Disconnected, Prepped for.
Buy It Now
$36.09 Shipping Condition: Used Location: Ripley, United States Nice Take Out from decommissioned CNC Machine. 30 Day Guarantee!
Buy It Now
Free Shipping Condition: New Location: Chesnee, United States Free Shipping.........A lot of 10pcs Made from brass 15mm ball to 1/4 loc line coolant nozzle. A must have on long to hard to reach tools. A standard ... morefit on okuma cnc lathes or any machine that except a 15 mm ball cooling nozzle. Loc line not included.
Buy It Now
$6.65 Shipping Condition: Used Location: Longview, United States Y axis gib and adjustment screw for hurco km -1 CNC milling machine
Buy It Now
Condition: Used Location: Miamisburg, United States Just arrived and can now be seen under power at our Warehouse in Beautiful Downtown Miamisburg, Ohio is this Hurco Model VSX24 Vertical Machining Center, ... moreS/N S242-06005100AFA, Manufactured New in 1998.
Buy It Now
Condition: Used Location: Monroe, United States 40 X 20 travels. chip auger. 24 pocket side arm tool changer. 1K IPM rapids. rigid tapping. peck tapping. USB and RJ-45. LED lighting.
Buy It Now
$6.05 Shipping Condition: New Location: Vacaville, United States CNC lathe coolant nozzle Loc Line for Hwacheon Okuma, Hurco 16mm ball to 1/4 Loc-Line. LOC LINE NOT INCLUDED
Buy It Now
Condition: Used Location: Harrison, United States 40" X Axis 18" Y Axis Hurco VM2 VERTICAL MACHINING CENTER, Hurco Max Cntrl, 8,000 RPM,CT40,16 ATC,Au. MODEL: VM2, S/N: VM2-06006094AEA, NEW: 2005. HURCO ... moreVERTICAL MACHINING CENTER. HURCO CONVERSATIONAL AND G CODE PROGRAMMING.
Buy It Now
$100.00 Shipping Condition: Used Location: Scottsburg, United States Hurco CNC Controller U4S01021094B #636E7PR6. Condition is Used. Shipped with Flat Rate Freight.
Buy It Now
$6.05 Shipping Condition: New Location: Vacaville, United States CNC lathe coolant nozzle Loc Line for Okuma, Hurco, Hwachion, DMG Mori, and many more. 12mm ball to 1/4 Loc-Line. LOC LINE NOT INCLUDED. Our nozzle is ... moremade for tight bends and can get into areas that your old nozzles can't. See our other listings for 13mm, 14mm, 15mm and 16mm sizes for larger lathes.
Buy It Now
Condition: Used Location: Canada Model: HURCO VM1 (2004). 2004 Hurco VM1 Vertical CNC Machining Center, 4th Axis Rotary Table. Vertical Machining Centers. equipped with Positioning Accuracy ... more750 / 750 / 500 in/min. Rapids (X/Y/Z).
Buy It Now
Condition: Used Location: Cincinnati, United States BMC-40 HURCO 3-AXIS BED-TYPE CNC. VERTICAL MACHINING CENTER. Nose to Table, Minimum 6.2". Nose to Table, Maximum 28.2". Spindle-Head Vertical Travel, ... more(Z-Axis) 22". Cutting Feed Rate, Range 0.1 to 150 IPM.
$15.10 Shipping Condition: Used Location: Torrance, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： ANSI Standard Taper: CAT 40 C: 45° D1 Knob: 0.740" D2 Neck: 0.490" D3 Hole: 0.28" D4 Pilot: 0.636" L: 1.625" L1: 0.440" L2 Shou to End: ... more0.640" Knob Socket: RKW40 Condition:100% Brand New & High Quality Fitment For Hurco Mazak Okuma Fadal Package Including: 15x CAT 40 Pull Stud Brand findmall MPN 252928 Type Pull Stud UPC Does not apply Quantity 15 Custom Bundle No Bundle Description No Warranty 1 Year Warranty 1 Year.
Buy It Now
Condition: Used Location: Newton, United States 2002 Hurco VMX-42 VMC. - Chip Conveyor. Travels: 42" x 24" x 24". 24 Station Sidemount Tool Changer- Dual Arm. Note: Machine vises and tool holders are ... morenot included. - Data Smoothing.
Buy It Now
Condition: Used Location: Harrison, United States HURCO VERTICAL MACHINING CENTER. MODEL: VMX-64/40T, NEW: 2006. VERTICAL COLUMN TRAVEL (Z-AXIS). 30" / 762mm. SPINDLE CENTER TO COLUMN. . 38". TABLE TRAVEL, ... moreX-AXIS (LONGITUDINAL). 64" / 1,625mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： ANSI Standard Taper: CAT 40 C: 45° D1 Knob: 0.740" D2 Neck: 0.490" D3 Hole: 0.28" D4 Pilot: 0.636" L: 1.625" L1: 0.440" L2 Shou to End: ... more0.640" Knob Socket: RKW40 Condition:100% Brand New & High Quality Fitment For Hurco Mazak Okuma Fadal Package Including: 40x CAT 40 Pull Stud Brand findmall MPN 252928 Type Pull Stud UPC Does not apply Quantity 40 Custom Bundle No Bundle Description No Warranty 1 Year.
Buy It Now
$139.80 Shipping Condition: Used Location: San Diego, United States Hurco Z Axis Drive Assembly For CNC 3 Axis Mill. See pictures for assembly parts includedGear still rotates freely. Operated fine until disassembly.
Buy It Now
Condition: Used Location: Muskegon, United States We recently acquired and stripped a Mid 1990's Hurco BMC30-SSM Vertical Machining Center, S/NB3SM91008116AA. This is a piece off the Hurco VMC described ... moreabove. This is the Tool Changer Assembly. Basically what you see is what you get, and all wires were cut.
Buy It Now
Free Shipping Condition: Used Location: Howell, United States This was just removed from a working Hurco MD1 VMC that we are rebuilding and is in great used shape.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States Tegara 3/4" ER20 Floating Tap Holder Made in Taiwan. Collet Series: ER20. Uses standard ER20 collet. ER20 collet nut is balanced. Fully ground on all ... morecritical surface including a pilot (dia. Made from alloy steel 5155 with heat treat to RC 56-58. ).
Buy It Now
Condition: For parts or not working Location: Woodruff, United States MANUFACTURE: HURCO. It has a computer monitor with it.
Buy It Now
Condition: For parts or not working Location: Dayton, United States Hurco Model BMC-30 CNC Vertical Machining Center. Must be air ride suspensions truck.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Port Richey, United States Hurco Ultimax II. For CNC Mill. Programming Manual. We here, at Rebuilt Machinery understand you need your manual, NOW! You need your PDF ASAP and we ... moreunderstand it! Your order is our PRIORITY! Every manual is carefully reproduced using Adobe software to make sure we get it right!
$65.00 Shipping Condition: For parts or not working Location: Fremont, United States Machine MUST BE sold. Email us for video of machine under power! OR. You are bidding on a HURCO HAWK MODEL 5D/5M CNC VERTICAL MILL Ultimax 3 Control. ... moreMachine removed from service first week of November! Plant Closed! Email for more information or video! Machine must be moved quickly! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
Buy It Now
Free Shipping Condition: Used Location: Manning, United States
Buy It Now
Free Shipping Condition: Used Location: Rochester, United States We're here to help! We appreciate your understanding in this matter.
|
|
|
|
1996 Hurco BMC4020/SSX CNC Vertical Machining Center Ultimax 3 Control BMC 4020
PLEASE NOTE: Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on an Hurco BMC4020 CNC Vertical Machining Center. Manufactured 1994 with Ultimax III CNC Control. No Tooling included. Currently in plant and under power. Email for more information or video! Machine must be moved quickly! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. We are currently getting exact cost. But estimate is $700-$800 to load onto flatbed ... morecarrier. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
Westamp 3 Axis Servo Drive, 4 Axis Power Supply Unit CNC, Hurco, Bostomatic, Etc
The Listing is for a westamp 3 axis servo drive. 4 axis power supply unit model number A6513- 10E- its used in many cnc milling machines hurco. Bostomatic etc and maybe very useful to someone as a spare. Has not been tested. But its appears to be in very good clean condition as per the pictures and will be well packed carefully for shipping. I will send overseas if required please check with me for shipping costs. Posted with
|
|
|
2004 Hurco VM-2 with 4th Axis Rotary
We are selling this 2004 Hurco VM-2. It has a Side Mount tool changer and a Chip Auger The machine is in very condition. It comes with a 4th Axis Rotary Table. The Rotary Table alone cost $9.500 Buyer is respondsible for loading. If you have interest in buying the machine before the end of the auction, please contact me through my E-mail. It will sell fast. Here are 2 links to 2 other Hurco machines like mine. Only they are VM-1's and mine is a VM-2, plus their prices are $36,500 and $29,900. My cost $16,500 plus it has a $9500 Rotary Table. http:www.ebay.com/itm/26-X-14-X-18-Hurco-Model-VM1-3-Axis-Vertical-Machining-Center-111000806198?pt=LH_DefaultDomain_0&hash=item19d829e336 http:www.ebay.com/itm/10055-HURCO-VM1-CNC-VMC-8000rpm-26-x-14-Travels-16ATC-CT40-Max-CNC-2004-281093992224?pt=LH_DefaultDomain_0&hash=item417281ef20 E-mail ... moreme at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is being sold as is. Where is.
|
|
|
2001 Hurco VMX-30 w/Hurco 4th axis
2001 Hurco VMX-30 VMC Equipped With: Hurco Ultimax/ Winmax CNC Control. Equipped with: Dual 12" Color Touch-Screens, Stylus, G Code, Conversational, DXF Transfer 24 Position Side-Mount Tool Changer CAT-40 Taper Spindle.Chip Auger Specification Description Table Size: 40.0" x 20.0" Max Table Weight: 3.000 lbs, Travels: 30" x 20" x 24" Rapid Traverse(X& Y/ Z) 1378 ipm/ 1181 ipm on Z axis, Spindle Speed: 10.000 rpm, Spindle Taper: CAT-40, Spindle Motor: 18 hp, Spindle Drive: Dual Wound Motor. Direct Drive, ATC Positions: 24, ATC Type: Side-mount. Dual Arm, Machine Weight: 10450 lbs.
|
|
|
HURCO VERTICAL MACHINING CENTER BMC30 30"X, 20"Y, 20"Z,15HP ULTIMAX CONTROL
OFFERED BY JAMESTOWN MACHINERY. INC. THIS IS IN OUR WAREHOUSE LOCATED IN MEADVILLE, PENNSYLVANIA. IT IS UNDER POWER AND AVAILABLE FOR INSPECTION. A VIDEO CAN BE FOUND ON YOUTUBE SHOWING THAT IT WORKS. NO LINKS ALLOWED ON EBAY SO SEARCH"HURCO BMC30 89" 3 DIFFERENT VIDEOS AVAILABLE. HURCO VERTICAL MACHINING CENTER MODEL BMC30 INSTALLATION DATE: 6-14-1989 SERIAL NUMBER BC-8007059-J SPECIFICATIONS: ULTIMAX CONTROL 24 POCKET UMBRELLA STYLE TOOL CHANGER SPINDLE: TRAVELS: 6000 R.P.M. X AXIS- 30” 15/12 HP Y AXIS- 20” CT#40 TAPER Z AXIS- 20 TABLE 25” x 47” MAX TABLE LOAD 1100 lbs weight 10.500 lbs DIMENSIONS 93” x 115.5” x 103” Equipped With: FLOPPY DISK DRIVE CONVERSATIONAL PROGRAMMING CONDITION: Normal 0 false false false EN-US X-NONE X-NONE This machine is in good running condition. It was traded in on a newer machine. This machine was ... moretaken out of service in 2008 and just recently installed. It is under power and available for inspection. Shipping and rigging is the buyer's responsibility. Rigging will be no more than $350. I can help find a truck to ship this. The machine will be prepared for shipment at not extra charge. CHECK MY EBAY STORE AND OTHER AUCTIONS FOR MORE ITEMS. INCLUDING: SURPLUS TOOLING AND INSERTS FROM A TECHNICAL SCHOOL. ALL EITHER USA MADE OR TOP NAME IMPORTS(SANDVIK. ISCAR, ETC. BORING BARS– We've reduced prices to move them and get you a great deal. See listing in left hand column under"Store categories" LATHE TOOL HOLDERS– $10.00 each! CARBIDE INSERTS– Price drop from half new cost to $1.50. $2, $4 or at most $6 per insert. Pay shipping on just the first item. CERAMIC INSERTS- $8.50 or less. WE ALSO HAVE ITEMS FROM A SHOP THAT SHUT DOWN INCLUDING: HSS MILLS REAMERS THREAD GAGES& RING GAGES TAPS HOLE MICS WORKHOLDING ITEMS THREAD CHASERS FOR GEOMETRIC DIES MONARCH VMC TOOL HOLDERS AND MUCH MORE. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
2008 Hurco VMX 84 50 taper, tooling, Coolant thru, optioned out, no reserve
This is a Hurco VMX 84/50 taper that was Hurco's IMTS 2008 machine. Machine shipped to our customer after IMTS 2008. Machine is equipped with 300 psi coolant through spindle. And nearly every software option Hurco sells. Comes with 29 pieces of CT 50 tooling and a handful of pull studs. Company is changing directions and doesn't need the machine anymore. Machine is running and under power ready to inspect. Machine is listed"as is" and customer is responsible for loading. Machine is in central Kentucky and ready for immediate delivery. Questions can be sent to mark@acimachine.com.
|
|
|
Hurco Three 3-Axis CNC BMC-40 Vertical Machining Center Manual
Our internal inventory number on this product is LHM12# MN65-B/3. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Hurco three axis CNC BMC-40 Vertical Machining Center Manual. Table of Contents: 1. General 2. Installation 3. Operating Instructions 4. Theory of Operation 5. Maintenance 6. Parts List Publication Number: 704-0001-370. Serial Number: BD-8003028A. Dimensions: 10" ... morex 11.5" x 1.75" Weight: app 3 Lbs. Copyright: 1987 It is(+/ 300 Pages. Seems complete and in generally FAIR used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay $3.00 Handling charge + ACTUAL UPS COSTS from 49534! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 am delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. We can ship on your account. Note. There is still a handling fee even if we ship out on your account. see listing details) Your shipment will not get shipped until the handling fee is paid for. International Shipping Polices: We ship FedEx Int
|
|
|
Hurco CNC Mill KMB-I KMB-1, For Parts or Retrofit RELISTING
This is a re-listing due to an ignorant. Out-of-country bidder who didn't realize it would be expensive to put this thing on a ship and transport it across an ocean. Really? The previous listing(item# 181211736401) had 10 watchers and 250 views. Hopefully this time someone who can use the machine will bid it and complete the deal. I have reduced the price further to make it very attractive to own. THIS AUCTION IS ONLY FOR BIDDERS IN THE CONTNENTAL US. I WILL NOT SHIP OUTSIDE THE US. NOTE: This is a 5 DAY LISTING and will end Wednesday. September 25. I will kill the auction to sell to the FIRST bidder at the starting price, so there is no reason to wait to bid. If it takes no bids and the auction ends, I'll pull the parts I can use. And scrap the rest. I really just want to make space in my shop. This is the only time I will re-list ... moreit. IF you have ANY questions please call me! =============== This is a used Hurco CNC-KMB-I vertical CNC mill. I believe from the 1980's. A little heavier than a standard Bridgeport with flat ways. It is not working. I got it several years ago on trade for another machine. In non-functional condition. At that time, I was able to get the software drivers for PC, and got the machine up and running. It had a limit control error at which point I could go no farther with it. I had intended to get it fully functional to use. But never got around to it. I had pulled all the boards. And shipped them off to get checked out and RAM upgraded. But, as you see in the photos, I never got to put them back in properly and reconnect all the cables. In the meantime. I got a newer machine, so this one has just sat for about 5 years. Its time to get it out of the shop and make some space. ============================================ This will make a great. Extremely low cost CNC machine for a fellow who has some time to spend putting it back together. It is also a wonderful candidate for a retrofit/conversion to a more modern control. For the guy needing parts. Then here's all of them in
|
|
|
HURCO BMC-3017 CNC VERTICAL MACHINING CENTER
The machine has a rebuilt spindle and works to factory new specifications. It has a thru the spindle coolant option. This is rare. Ultimax conversational control is very easy to use. It has an optional port to allow downloading from all major CAM programs. It uses Cat 40 tool holders and has several included. Tool changer has 24 tool capacity. Ridgid Tap Capability Max table load is 1,100 pounds. Pre-wired for a 4th axis. This is a very good older machine that has years of service left. If your local, you can see it run
|
|
|
Hurco CNC BMC 50 Machining Center 1998
HURCO BMC 50 20 HP VERTICAL BED-TYPE CNC MACHINING CENTER WITH EXTRA LARGE WORK CUBE Year of Mfg. 1998. Serial Number ZF-90020XXR This machine when purchased new. The owner paid $157,211.00 This machine features High Accuracy Machining Rigid Cast-Iron Construction Reliable. Long-Term Performance Easy Operation& Programming Complete Factory Support Ultimax II CNC Control. Standard Features include. Conversational and NC Programming, Concurrent Programming, Dual RS-232C Ports, AC Servo Motors w/Ballscrew-Mounted Encoders, Estimated Run Time, Ninety-nine Tool Offsets, Calculator-Style Keypad, Unlimited Program Storage, Automatic Lubrication, Flood Coolant, Halogen Worklight, Automatic Speed and Feed Calculation, Feed and Speed Optimization, Spindle& Axis Load Indicator, Spindle Oil Cooler, Programmable Safety Zones, Axis Jog Handwheel, ... moreAxis Feedrate Override, Spindle Speed Override, w/Chip Conveyor& Coolant Enclosure. BMC 50 Specifications Table Overall Size 78.7 x 34.2" Working Surface 66.9" x 27.6" Table T-Slots 5 x 7.1" on 4.92" Centers Table Load w/Uniform dist. 3300 lbs. Table Center to Col. Ways 5.5" Min. and 35.5" Max. Spindle Motor Horsepower(30 min. 20 hp(continuous) 15 hp Type 3 Phase AC. Variable Frequency Spindle Type Cartridge#50 V-Flange(Caterpillar) Spindle Nose to Table 7.9" min. and 31.5" max. Spindle Center to Col. Ways 23.6" Spindle Speeds 30-4000 rpm Spindle Orient Electronic Spindle Torque 213 lbf.ft(continuous) at 333 rpm Spindle Torque 283 lbf.ft at 333 rpm Automatic Tool Changer Tool Holder#50 V-Flange(Caterpillar) Tool Selection Bi-directional random Number of Stations 20 Tool Weight(max. 33 lbs. Tool Length(max. 12" Carousel Weight(max. 450 lbs. ATC Time Tool-to-Tool 8 seconds Axis Travel Longitudinal(X) 52" Cross Table(Y) 30" Vertical Head(Z) 23.6" Lubrication Auto lube on sideways and ball screw Milling Capacity(mild steel) 22 cu in/min. Drilling Capacity(mild steel) 2" Tapping Capacity 2" System R
|
|
|
2004 Hurco VMX-24S 'Video"
Description: VIDEO. Hurco vertical machining center VMX 24S. Built 2004. Hurco Ultimax control. Specifications: XYZ axis travel mm 610/510/610 Rapid XYZ axis m/ min 35/35/30 table Table size 760 x 510 mm table load capacity of 1350 kg distance between Tischoberf. Spindle nose mm 150 760. Main Spindle Speed min-1 15000. Main motor power kW 9. Automatic Tool Changer(ATC) Number of places/ Spindle taper 24/ SK 40 tool diameter mm 80 Max tool length mm 300 Max tool weight kg 7. Accessories: Options; 3D Mold. Utility Pockets. Probing. DXF. Rigid Tap. Part Probing. Tool Probing. Ramp/Helical Entry. Adaptive Surface Finishing. Wired 4th Axis. Runs Excellent! Questions Call Steve@ 866-803-5202 Freight Quotes Contact
|
|
|
Hurco Hawk 5D with Dynapath CNC Control Heavy Duty Ways
Hurco Hawk 5D Dynapath CNC Control Heavy Duty Ways• Max. table load 800 lbs• X-axis travel 31” Y-Axis travel 14” Z-axis spindle stroke 6” Spindle nose to table 4 ½” x 19 ½” Manual vertical adjustment of knee 15” 3500 RPM For More Info Please Call Maury Cohn 1 800 888 4312
|
|
|
Hurco Hawk 5D with Dynapath Delta CNC Control Heavy Duty Ways
Hurco Hawk 5D Dynapath Delta CNC Control Heavy Duty Ways• Max. table load 800 lbs• X-axis travel 31” Y-Axis travel 14” Z-axis spindle stroke 6” Spindle nose to table 4 ½” x 19 ½” Manual vertical adjustment of knee 15” 3500 RPM For More Info Please Call Maury Cohn 1 800 888 4312
|
|
|
Hurco KMBx1 CNC Mill, video demo, upgraded control, manuals, tooling, Koolmist™
Please watch this video: youtube.com/watch?v=36Myr_i6vt0 If you cannot figure out how to view the video please message me with your email address and i will forward you a working link. Ebay will not allow a direct link in the listing. The video includes a quick look. Homing the table, and milling an 8" dia circle pocket at 100ipm and 900 rpm. This machine has NOT been repainted. It is completely original. As you can see in the pictures and video. This is a nice clean machine in fully operational condition. You can hear my footsteps in the video while the machine is running, thats how quiet it is. The control system has been upgraded with an aftermarket 4 layer mpu board that runs the original hurco conversational as well as g-code and can accept program via rs232 as well. There is program storage on the board and no tapes of any kind ... moreare used to operate the machine. Service and support for this machine and the aftermarket board are excellent. There are multiple companies in the U.S. that can offer anything you may need. The spindle drive has been updated as well. A Yaskawa EMS drive with dynamic braking resistor has been installed in place of the antique spindle drive system that was OEM. It can be replaced at a moments notice with any off the shelf comparable drive should the drive ever fail. No need to lay your house on the table for high-priced oem gouging. The machine has standard coolant through nozzle and a Koolmist™ system. Programmed accordingly. Uses Kwik-switch™ 200 toolholders Runs on 230v 3ph Please feel free to contact me for a personal demo if you're local to WNY. Rigging/loading has been quoted at $400 and is the burden of the buyer. It will be added to your ebay invoice. This machine weighs 5.000lbs and requires approx 5'x 7' of space to ship. Again. Feel free to contact me anytime if you need information. I have two manuals covering this machine that will be included. I will also include a few toolholders to get you started. Finally.this is a very solid. Fully functional mill in
|
|
|
HURCO HAWK MODEL 5D/5M CNC VERTICAL MILL Ultimax 3 Control
Machine MUST BE sold. Email us for video of machine under power! OR. You are bidding on a HURCO HAWK MODEL 5D/5M CNC VERTICAL MILL Ultimax 3 Control. Machine removed from service first week of November! Plant Closed! Email for more information or video! Machine must be moved quickly! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
2007 Hurco VM-1 "Video"
2007 HURCO VM-1 Hurco MAX Control. Version 2.37.01E"X"26" Y"14" Z"18" Max. R.P.M.s.8.000 A.T.C.20 OPTIONS: 3D MOLD VH Pockets DXF Individual Standard NC Rigid Tap Ultinet Advanced Velocity Control Ramp Helical Entry Floppy Drive Graphics Extended HDD Extended Memory Video: Questions: Please call Mike@ 714-892-9800
|
|
|
1998 Hurco BMC 3017/SSM Vertical Machining Center Mill CT40 24 Station ATC
1998 Hurco BMC 3017/SSM Vertical Machining Center. Machine is in mint condition. Specifications: Control. Ultimax SSM. Table Size. 40" x 16" Max Table Load. 1.100 lbs. X Axis Travel. 30" Y Axis Travel. 18" Z Axis Travel. 24" Spindle Nose to Table. 7.8" 28.6" Spindle Speed. 6.000 RPM. Spindle Motor. 15 HP. Spindle Taper. CAT40. Rapid Traverse Rate. 945 IPM. Tool Stations. 24 ATC Carousel. Equipped With: Hurco Ultimax SSM Conversational Contro Rigid Tap Ethernet Port RS-232 Port Coolant System With Washdown Nozzles Full Enclosure Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual ... moreshipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to p
|
|
|
2004 Hurco VM-1 Vertical Machining Center Mill CT40 16 ATC Max control BT40
2004 Hurco VM1 CNC Vertical Machining Center. Machine is in very good condition. Specifications: Table Size: 30” X 14” Max Table Weight: 750 LBS. X Axis Travel: 26” Y Axis Travel: 14” Z Axis Travel: 18” Spindle Horsepower:15 HP Spindle Speed: 8.000 RPM Spindle Taper: BT40 Tool Changer: 16 ATC Machine Weight: 8.000 Lbs Machine Voltage: 208-240 VAC Equipped With: Max Control 16 ATC Pre-owned Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose ... moreof obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY INFORMATION 520 Machinery Sales is a new and pre-owned equipment full service. St
|
|
|
2007 HURCO VM1 VERTICAL MACHINING CENTER
Specification Description X-Axis Travel, 26" Y-Axis Travel, 14" Z-Axis Travel, 18" Table-W, 14" Table- L, 29" Spindle Motor, 10 HP, Spindle, 8.000 RPM, ATC, 20 Station, Taper, CAT40, Dimensions, 90" x 77" x 95" Weight, 6.825 LBS, Equipped With: HURCO WINMAX CONTROL USB Port RS232 PORT WORK LIGHT Rigid Tap Coolant Tank DXF Transfer 2011 Winmax Software upgrade Advanced Verification Graphics NC Production Package Industry Standard NC Select Surface Finish Quality PRICE: $46.450.00"AS IS, LOADED ON YOUR TRUCK" or BEST OFFER WE ACCEPT PAYMENT: WE ACCEPT FULL PAYMENT VIA BANK WIRE TRANSFERS. CASHIERS CHECKS, OR MONEY ORDERS ONLY WITHIN 48 HOURS OF PURCHASE. CONTACT OUR OFFICE FOR PAYMENT DETAILS. ALL TAXES. FREIGHT AND RIGGING AT CUSTOMER SITE ARE THE RESPONSIBILITY OF THE BUYER. THIS MACHINE IS ... moreALSO BEING ADVERTISED AND LISTED LOCALLY THROUGH OTHER SOURCES AND MAY BE SOLD AT ANY TIME. WE RESERVE THE RIGHT TO SELL THIS ITEM AND PULL THIS LISTING AT ANY TIME WITHOUT ADVANCE NOTICE. MACHINERY SOURCE. LLC 6530 Revlon Dr. Belvidere. IL 61008 PH: 815-547-0990 FX: 815-547-1631 sales@machinerysource.com Caleb Anderson Bryan Banzhaf
|
|
|
1996 HURCO BMC-30SSM VERTICAL MACHINING CENTER
Specification Description TABLE SIZE, 44" x 19.5" X-AXIS TRAVEL, 30" Y-AXIS TRAVEL, 18" Z-AXIS TRAVEL, 24" MAX TABLE LOAD, 1.500 LBS, SPINDLE NOSE TO TABLE DISTANCE. 4" 24" SPINDLE CENTER TO COLUMN, 20" SPINDLE SPEED, 8.000 RPM, SPINDLE MOTOR, 10 HP AC, SPINDLE TAPER, CAT-40, FLOOR TO TABLE SURFACE, 32" RAPID TRAVERSE RATES X/Y/Z, 600 IPM, FEED RATE X/Y/Z, 600 IPM, APPROX MACHINE DIMENSIONS, 84" x 112" x 94" APPROX MACHINE WEIGHT, 10.500 LBS, Equipped With: HURCO ULTIMAX SSM CNC CONTROL 24-TOOL AUTOMATIC TOOL CHANGER RIGID TAP GRAPHICS PACKAGE 8.000 RPM SPINDLE w/ CHILLER ALL AVAILABLE MANUALS. PRICE: $17.550.00"AS IS, LOADED ON YOUR TRUCK" or BEST OFFER WE ACCEPT PAYMENT: WE ACCEPT FULL PAYMENT VIA BANK WIRE TRANSFERS. CASHIERS CHECKS, OR MONEY ORDERS ONLY WITHIN 48 HOURS ... moreOF PURCHASE. CONTACT OUR OFFICE FOR PAYMENT DETAILS. ALL TAXES. FREIGHT AND RIGGING AT CUSTOMER SITE ARE THE RESPONSIBILITY OF THE BUYER. THIS MACHINE IS ALSO BEING ADVERTISED AND LISTED LOCALLY THROUGH OTHER SOURCES AND MAY BE SOLD AT ANY TIME. WE RESERVE THE RIGHT TO SELL THIS ITEM AND PULL THIS LISTING AT ANY TIME WITHOUT ADVANCE NOTICE. MACHINERY SOURCE. LLC 6530 Revlon Dr. Belvidere. IL 61008 PH: 815-547-0990 FX: 815-547-1631 sales@machinerysource.com Caleb Anderson Bryan Banzhaf
|
|
|
1990 HURCO BMC-20 Three Axis CNC Vertical Machining Center
Under Power and running great. TRAVEL(X) 22" TRAVEL(Y) 14" TRAVEL(Z) 14" SPINDLE TAPER#40 AUTOMATIC TOOL CHANGER 16 SPINDLE SPEEDS(VARIABLE) 60 TO 6000 RPM WEIGHT- APPROX. 5750 LBS. APPROX OVERALL DIMENSIONS 110" W) X 135" D) X 95" H) HURCO ULTIMAX DUAL SCREEN CONTROL SPINDLE DRIVE MOTOR 7-1/2 HP 3 PH. 240 V COOLANT TANK AND PUMP GIVE MA A REASONABLE OFFER Local pick up is free. You can arrange Freight with Machines Mover yourself.
|
|
|
Hurco VM1G CNC Mill
SOME INFORMATION FROM HURCO REGARDING THIS MACHINE! Hurco VM1 Graphite VMC It's time someone looked differently at machining graphite. That's exactly what Hurco did. And it's what led to the remarkable VM1 Graphite. This mill is identical to the standard VM1. But with key differences that make it ideal for graphite work. It has an exceptionally high-speed spindle ensuring quality performance. The standard version is 20.000 rpm. An option is available capable of 30,000 rpm. The machine is tightly enclosed and has positive air flow to remove the dust. Hurco can provide a vacuum system or use your own. Table Size 30" x 14" Maximum Weight on Table 750 LBS X-Axis Travel 26" Y-Axis Travel 14" Z-Axis Travel 18" Rapid Traverse Rates(X&Y/ Z) 750/ 500 IPM Spindle Taper CAT 40 Spindle Speeds 30.000 RPM Spindle ... moreDrive Motor 15/10 HP Spindle Torque 54 ft. lbs. 1450 RPM Automatic Tool Changer Capacity 16(Sidemount/Swing Arm) Maximum Tool Diameter 3.5" 5" Maximum Tool Length 9.8" Maximum Tool Weight 15.5 LBS Approximate Machine Dimensions 91" x 78" x 96" Approximate Machine Weight 7000 LBS Equipped With: Hurco MAX CNC Control 12" Color LCD Conversational& NC(G-Code) Programming Fourth Axis Interface Rigid Tapping DXF File Transfer Flood Coolant System 16 ATC Full Enclosure Two Color Tower Light We purchased this machine in 2009 to use for high speed. Precision machining of graphite materials for EDM and other complicated geometries. The machine worked great for us but we no longer need this since we changed to focus of our business. We can load this machine on a truck for you at no extra charge. If required, we can put power to the machine and it can be run at our location. Please contact us through ebay with any questions! It's a great deal for a great machine. On Mar-18-14 at 12:15:00 PDT. Seller added the following information: NOTE: The Spindle on our machine is BT30 not Cat40.
|
|
|
Hurco KMB1M CNC Knee Mill with Tooling, aluminum stock, manuals, and upgrades
You are viewing a listing for a used Hurco KMB1M 3hp 3phase 240v CNC Knee Mill. to see a video of this machine operating visit youtube This machine is equipped with snubber filters. Overtime they get old and go bad. 2 of them went out. They are all mounted to a board and the fix is to pull the board and rewire the replacements in. I have too many projects and have not gotten to this project. I have the parts and they are included. I am including the tooling and aluminum stock that I have on hand. I am selling this machine because I am moving and will not have 3 phase in my next home/workshop. Before you offer me a low offer- you are bidding against scrap value. I hate to scrap this machine. But it weighs just over 2 tons and that pays pretty good these days. I have set the buy-it-now at a fair price. I paid much more for this a few years ... moreago. The tooling alone is worth quite a bit. It's equipped with Kwik Change#200 tool holders. A box of collets is included. This machine is HEAVY. Plan your move before you bid. It weighs 5000 pounds for moving/planning purposes. It is equipped with lifting eyes for tie-downs. But I don't recommend lifting it with them. I have a pallet jack that can move the machine out of my shop. Your rigger is responsible for any damage to my property and must show proof of insurance before loading. i.e. gouges to the driveway or flipping the machine and crushing something or cracking the driveway. My driveway is 6 inch thick reinforced concrete so it can handle the weight. My forklift is not capable of picking up this machine. A forklift could be rented for the day and I would be happy to pull the Hurco out of the shop to where you can get to it. I will not allow anyone else to drive a lift in my building. My recommendation is a roll back and to winch the machine onto the flat bed and secure it. Then use a forklift or crane on the destination to unload. That is how it got here. Machine History: original owner Polaroid. previous owner Machinist for a local tractor company. This was hi
|
|
|
Hurco BMC-40 CNC Vertical Machining Center, NO RESERVE, FREE LOADING, 1992
PLEASE CONSIDER THIS MACHINE FOR A RETROFIT OR PARTS ONLY IT DOES NOT RUN. This machine has an issue with the control and I can't power it up. Here is what I do know about it. There are one possibly two encoders bad for the servo motors. The control is not coming up all the way right now, one of the CRTs is bad, pendant is bad, and all the buttons are missing from the control. As for the servo drives, spindle drives, etc, I do not know the status of them. This is strictly an as-is where is auction with no reserve. Please advise if you would like any additional information. I can shop a freight rate for you if you would like me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. Please feel free to call or email anytime. Hurco BMC-40. 27" x 51" Table, X=40, Y=30" ... moreZ=20" 30 ATC, 40 Taper, 3300 LB Table Load capacity, 1992
|
|
|
Hurco Hawk 30
3-axis CNC mill in excellent condition. Upgraded Ultimax software version 2.15 with extra options added. 208V 3-phase electrical. Everything on machine is functional( i.e.coolant. No weird alarms, servo drives, spindle) Dual touch screen. 3-D graphing option. Can use conversational programming or standard G-code. CAT40 tool holders will be included with the machine in addition to KURT vise, collets, and collet nuts. Carbide tooling package also available at no extra cost. This is a nice machine that will hold +/ 0002 at least. Shipping can be discussed at time of sale over e-mail or phone. Weight: 5.000 lbs Dimensions: 5' W 6'L 10'H PH(574) 440-0495 e-mail: mou.khatthavong@yahoo.com
|
|
|
HURCO KM5P CNC Vertical Mill 1992 5HP Ultimax 2 Control
We are a OEM vertical grinder manufacturer with a good sized machine shop in our building. Due to an influx in orders for our machinery we are looking to update several pieces of our shop equipment. We have used this machine every day since 1992 with very little down time. The only thing wrong with this machine is the ride side monitor is not working. We have used this machine with out this monitor for several years without any problems. This machine was connected to a pc to upload and download to our server 2008. That was the typical connection but we know the diskette drive still works and we verified it. This is priced to move. Help us help you. We also have another one of these KM5P machines that the electronics is malfunctioning and will sell for very reasonable. Local pickup is good but we can ship anywhere in the world. But at your ... morecost. Table is 13" x 42" Quill travel(Z) is 6" X is 31" Y is 14"
|
|
|
Hurco KMB1M (X) Motherboard upgrade (modern board) BX-MPU
HURCO KMB1M(X) motherboard. BX-MPU(REV. C) Made by Accurate Machine Tool. This board replaces motherboard and the 3 memory boards. It has a modern RS232 socket x 2. It holds master system in memory(I think it can hold two systems and switch between them) It holds memory with power removed. You'll transfer part programs via RS232 from laptop(communication program download from Accurate machine tool but I'm sure other comms can be used) You can load master by various means(I loaded from the tape. Only need to do it once) It's from my KMB1M. It looks brand new but is about 4 years old with almost no use. Good working order. Accurate Machine Tool website tells you about it. amtsinc.com) All parts available from my Hurco thru Ebay. ask. including good ball screws, good spindle, mist coolant tank and system, lifting eye, apron, bed ... moreguard, spindle tooling) My phone number 07891799218. Bank transfer also good.
|
|
|
Hurco VM1 (ALI #403043)
This Hurco VM1 is in good condition. The Hurco VM1 is another fantastic offering of ALI's CNC machine tools and used machine tools for sale. ALI#403043 Price: $39.500 Specifications: Year: 2007, Model: VM1, X: 26 in, Y: 14 in, Z: 18 in, Power: 10 hp, RPM: 8000 rpm, ATC: 16, Table-W: 14 in, Table-L: 29 in, Taper: CAT-40, Weight: 8400(LBS) Control: HURCO MAX, ALL BUYERS PLEASE READ ABOUT US: Asset Liquidity International. Inc. has specialized in Asset remarketing of Repossessed and End-of-Lease Bank-Owned equipment in North America. PAYMENT: PAYPAL accepted only on purchases under $500. All sales over $500 are strictly paid via certified bank check or Bank Wire Transfer. Any fees not charged by the seller but related to the sale are the buyer's responsibility. Customs fees. Duty, bank wire fee, exchange fees, local taxes, etc. Payment ... moreshall be made within 3 days of agreed upon selling price. ALL PAYMENTS MUST CLEAR PRIOR TO PICK UP OR DELIVERY OF ANY ITEM. SHIPPING: Unless expressly outlined in the sale listing. All sales are pick up only, all rigging and freight is an extra cost and is the buyer’s responsibility. TERMS: This item(s) is available for inspection and is sold As-Is. Where-Is. All sales are final. All information stated is to the best of our knowledge. These may be inconclusive or incomplete and not guaranteed. Buyer is responsible for confirming all stated descriptions, condition statements, operability, inventory and specifications. Please, read the description carefully and if some info is missing or unclear, please, contact me with any questions prior to making an offer. All sales are final; no refunds, no warranty is expressed or implied. CONTACT: Please contact me at your convenience with any questions before the sale.
|
|
|
2004 Hurco VM1,8000rpm, 15hp, Loaded Software
Hurco VM1- CNC Vertical Machining Center We are a small manufacturing company looking to sell due to lack of use. Any questions about this item reguarding payment or pickup please email me at: Software Control: Slim Line Touch Screen LCD Control MAX control(conversational) 3.5 floppy RS232 Serial Ports Specs: Table Size 30” x 14” Max Weight on Table 750 lbs Spindle Nose to Table 4” X-axis Travel 26” Y-axis Travel 14” Z-axis Travel 18” Rapid Traverse Rates XYZ 750 IPM Spindle Taper CAT 40 Spindle Speed 8.000 RPM Spindle Drive Motor 15 HP Spindle Torque 54 ft lbs@ 1450 RPM ATC Capacity 16 Tools(Sidemount/ Swing Arm) Max Tool Diameter 3.5” 5” Adjacent Max Tool Length 9.8” Max Tool Weight 15 lbs Machine Dimensions 91” x 78” x 96” Machine Weight 7.000 lbs Options: Ulti-Pockets Advanced Velocity Control Ramp/ Helical Entry 3.5" Floppy Drive ... more1GB Hard Drive and 8 MB of RAM Advanced Verification Graphincs Select Surface Finish
|
|
|
Hurco BMC-30M CNC Vertical Machining Center – 1998
Hurco BMC-30M CNC Vertical Machining Center– 1998 X-Axis.30" Y-Axis.18" Z-Axis.24" Table Size.40.1" x 15.7" Spindle Speed.0- 8.000 RPM Main Motor.10 HP Spindle Taper.CAT 40 Tools.24. Spindle Nose to Table Top.6" 30" Table Load Capacity.1.100 lbs. Rapid Traverse Rates(X&Y/Z)590/ 393 IPM Tool Change Time(T-T/C-C)7/ 11 Seconds Max Tool Diameter.3.9" Max Tool Length.12" Max Tool Weight.15 lbs. Power.240volts/60hz Full Load KVA.20 KVA Largest Motor KVA.7.5 Machine Dimensions(L x W x H)102" x 108" x 98" Machine Weight.8.200 lbs. Equipped With: Ultimax Dual Control Link to watch video: http:youtu.be/yrJl91nbX9A Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" ... moreand with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
|
|
|
Hurco Hawk 5M CNC Vertical Mill w/ Yuasa 4th Axis Ultimax Control CAT-40 5 HP 97
1997 Hurco Hawk 5M CNC Vertical Mill video: http:youtu.be/JRFmmXgEpio Specifications: Control. Ultimax 3/486 Dual Screen X-Axis Travel. 31" Y-Axis Travel. 14" Z-Axis Travel. 6" Knee(Manual) 15” Axis Thrust. Max(x)y) 1700 lbs Axis Thrust. z) 2200 Lbs Rapid Fee Rate. x)y) 400 IPM Spindle Type. CAT 40 Spindle Drive. 2 Speed Back Geared Vari Drive Speed Programmable. 70-480 550/3800 RPM Nose to Table. Min/Max: 4.5”19.5” Center to Column Ways. 14” Quill Diameter. 4.3” Bearings. ABEC Class 7 Angular Motor. 5 HP Power. 3 Phase 220 Volt Equipped With: Yuasa 4th Axis Yuasa Control Box Precision Ground Ball Screws Programmable Spindle Speeds Chip/Coolant tray All Manuals Included Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or ... moreemail at celeste@520financegroup.com Purchasing Information: There is a strong chance that thi
|
|
|
Hurco BMC 2416 Vertical Machining Center w/ 4th Axis 30x16 Mill SMW Indexer 24
1989 Hurco BMC 2416 with 4th Axis Rotary Table Specifications: Table Size. 30" x 16" Maximum Table Load. 760 Lbs. X-Axis Travel. 24" Y-Axis Travel. 16" Z-Axis Travel. 20" Spindle Nose To Table Top. 6" to 26" Spindle Speeds Min/Max. 8.000 RPM Spindle Taper. 40 Taper Main Motor(30 Min) 10 HP Tool Changer Positions(Side Mount) 24 ATC Rapid Traverse(X. Y) 945 IPM Approximate Floor Space. 79" L x 104" W x 81" H Approximate Weight. 8.000 Lbs. Equipped With: Ultimax SSX Control 24 Position Side Mount Tool Changer SMW RT-160 4th Axis Indexer Please contact Jason Stob at 708 790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 ... moredays of the auction. All items are subject to prior sale. For the purpose of obtaining shipp
|
|
|
Hurco BMC 25 CNC Machine Center
Hurco BMC 25 No longer need machine and need it out of the way. It is operational but needs software. Can be used as a parts machine. $3000 OBO Parts are no long made for this machine so if you have one in use this machine can become extremely valuable to you. This machine is also being listed locally. Shipping is buyer responsibility.
|
|
|
2003 HURCO VERTICAL MACHINING CENTER w/HURCO MAX CONTROL 2
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2003 HURCO VERTICAL MACHINING CENTER w/HURCO MAX CONTROL 2 Ref# 152845 iammdna XVMCTR HURCO VERTICAL MACHINING CENTER MODEL: VM1 S/N: VM1-06026083BEA. MFG: 2003 SPECIFICATIONS: X-AXIS TRAVEL. 26" ... moreY-AXIS TRAVEL. 14" Z-AXIS TRAVEL. 18" TABLE WORKING SURFACE. 30" X 14" MAX TABLE LOAD. 750 lbs. SPINDLE TAPER. ANSI#40(CAT40) SPINDLE SPEED. 8.000 RPM. SPINDLE NOSE TO TABLE. 4" TO 22" X-AXIS RAPID FEED RATE. 750 IPM. Y-AXIS RAPID FEED RATE. 750 IPM. Z-AXIS RAPID FEED RATE. 500 IPM. CUTTING FEED RATE. 0.04- 300 IPM. AUTOMATIC TOOL CHANGER: NUMBER OF STATIONS. 16. MAX TOOL DIAMETER. 3.5" WITH ADJACENT EMPTY POCKET) 5" MAX TOOL LENGTH. 9.8" MAX TOOL WEIGHT. 15.5 LBS. ADAPTER. ANSI#40(CAT40) FLOOR SPACE REQUIRED. 71" x 63" x 96" SHIPPING WEIGHT. 7.490 LBS. SHIPPING DIMENSIONS. 78" x 91" x 96" EQUIPPED WITH: HURCO MAX CONTROL(CONVERSATIONAL PROGRAMMING. TOUCHSCREEN, G-CODE. 12" LCD MONITOR) 16-STATION AUTOMATIC TOOL CHANGER. COOLANT SYSTEM. RIGID TAPPING. CHIP AUGER. AC MOTORS& DRIVES.
|
|
|
1997 HURCO HAWK 5SSM w/ ULTIMAX SSM Control
The Winzeler Stamping Company is looking to sell the following item: 1997 Hurco Hawk 5SSM Vertical CNC Mill The Hurco 5SSM Mill has a Ultimax SSM Control Single Screen and Programmable Spindle Speed. The Hurco has a 4th Axis Rotary Head and DxF Option. We have included all materials associated with this machine that we currently have including: Manuals& spare/old parts(See pictures for more details) It is to be noted that this Hurco does not currently work. We keep receiving a Y-Axis Motion Control Error& Y-Axis Following Error. Also the machine will not calibrate and may have undetermined damaged from attempting to calibrate. I am unable to say whether or not this machine will work again and leave it to the perspective buyer to determine such status. Please note that this is pick-up only unless the shipper would like to organize ... moreshipping after the fact. If you have any questions. Feel free to contact me and I will get back with you as soon as possible. Thank you for your interest and Happy Bidding!
|
|
|
hurco cnc milling machine knee mill kmc-3p atc 3 axis tool changer coolant
The Mighty Hurco. Hurco machines are known for their rigidity and durability. The iron on this machine is like a new machine. This machine is equipped with a 24 pot ATC. ATC carousel motor works great. I haven't been able to get it to the point to be able to test the air cylinder for the tool changer. Also. It may be missing some apparatus that actually grabs the tool on the end of the mechanism. Power draw bar motor works great. Automatic spindle speed motor works great. Spindle motor works great. I removed the front cover to move the Z before I had it under power. And the ball screw and all look new. The ways look perfect. Table is super smooth with no drill damage or other. Knee travels super smooth. And again, ways show no wear. Machine is equipped with a coolant flow system that is in unknown condition. Machine powers on except for ... morescreen. It had a few wires that were chewed by a mouse. Repaired some of the wires and had some of the control lighting up. But still no screen. Machine is under power. All motors can be tested via the contactors. All motors have tested good. NMTB30 tool holders available in another auction. We will include 1 tool holder that is used and came with the machine. It is a collet holder that I think is ER40. This machine very likely just had a minor electrical issue. If someone is familiar with these machines. It could be a quick fix. Alternatively, this is a great candidate for a retrofit to a new control; which is what I will do if it does not sell. Table Working Surface. 12" x 42" Table Load Capacity. 500 LBS. Longitudinal Travel(X-Axis) 24" Cross Travel(Y-Axis) 13.7" Vertical Travel(Z-Axis) 5" Knee Travel(Manual) 15.5" Ram Travel. 14" Maximum Clearance Table Top to Spindle Nose. 19" Maximum Feed Rate. All Axes. 150
|
|
|
#HTX500 HURCO 4-AXIS CNC HORIZONTAL MACHINING CENTER #SS024
HTX500 HURCO 4-AXIS CNC HORIZONTAL#SS024 MACHINING CENTER w/2-PALLET-SHUTTLE New 2007. Serial No MH46-01001086AGA, Model HTX500, EQUIPPED WITH: Hurco Ultimax 4 Dual Screen CNC Control w/Cutter Inserts Option. 3D Part Programming Option, WC Productivity Package Option. Ultipocket Option. Rotary Option, Probing Option, Ultitran DFX Option. Ultinet Option, Helical Plunge Option(2) 19.68" x 19.68" Pallets On Dual Pallet-Shuttle 60-Position Automatic Tool Changer Rigid Tapping Thru The Spindle Coolant System(2) Tombstones- 2) Boxes Of Tooling CATALOGUE SPECIFICATIONS: Pallet Shuttle Dimensions. W x L. 19.68" x 19.68" Pallet Load Capacity(each) 1100 LBS X-Axis Table Longitudinal Travel. 28" Y-Axis Head Vertical Travel. 24" Z-Axis Column In-Out Travel. 24" Spindle Taper. 40 CAT Spindle Speeds. Range. to 12000 RPM ... moreFeed Rate. Range. to 600 IPM Rapid Traverse Rate. X, Y& Z-Axis' 1380 IPM Spindle Motor. 15-Minute Rating. 20 HP Weight. Approximately. 28650 LBS PRICE: F.O.B. OUR WAREHOUSE. $79.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
|
1998 Hurco BMC 3017 Vertical Machining Center Mill CT40 24 Station ATC Rigid
1998 Hurco BMC 3016 Vertical Machining Center Specifications: Control. Ultimax Dual Table Size. 40" x 16" Max Table Load. 1.100 lbs X Axis Travel. 30" Y Axis Travel. 18" Z Axis Travel. 24" Spindle Nose to Table. 7.8" 28.6" Spindle Speed. 6.000 RPM Spindle Motor. 15 HP Spindle Taper. CAT40 Rapid Traverse Rate. 945 IPM Tool Stations.24 ATC Carousel Equipped With: Hurco Ultimax Dual Control Rigid Tap 3D Mold DXF Transfer Conversational Programming Industry Standard NC Programming Ultipro Ulti-Pockets RS-232 Port 10 Base T Port Full Enclosure Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally ... moreat our facility before we take it
|
|
|
2006 Hurco VM1 Vertical Milling & Machining Center. LOW Hours! Great Cond!
Offered for sale is a 2006 Hurco VM1 vertical machining center. This machine is in great condition with very low hours(under 2000) and has been well taken care of. New processor and hard drive just installed due to power surge in the building. Tooling and vise pictured are not included. Call or email with questions. 712-944-4900. Hurco Vertical Machining Center Control: Hurco MAX touchscreen Coolant system Work light Rigid tapping X Axis Travel: 26" Y Axis Travel: 14" Z Axis Travel: 18" Table Size: 30" x 14" Max Table Load: 750 LBS Spindle Taper: CAT 40 Spindle Speed: 8.000 RPM Spindle Motor: 15 HP Tool Capacity: 16 ATC Machine Dimensions: 96"L x 62"W x 72"H Machine Weight: 6.250 LBS 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14895158f21-0x10f-
|
|
|
1998 Hurco BMC 4020 CNC Vertical Machining Center
1998 Hurco BMC 4020 CNC Verticle Maching Center M# BMC4020/SSM Mfg# Q6236 S# B42SM910011270C Condition: Used Table Size: 48"x20" X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 24" Spindle Horsepower: 20HP Spindle Speed: 8000 RPM Spindle Taper: CT40 Tool Changer: 24 ATC Machine Weight: 13.000 lbs. Machine Dimensions: 136" x 96" x 100" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-148d20f18cf-0x113-
|
|
|
HURCO CNC Three Axis Milling Machine Model 6051 K8023091
Machine has not been ran for the last 7 years. But has been in a climate control storage area. Selling machine as a whole, or for parts or computer broad. This machine was retrofitted by Midwest CNC. Original Hour are 3,922. All manuals available.
|
|
|
2000 Hurco VMX-50 Vertical Machining Center Ultimax Conrtrol 50x26 VMC Mill 10K
2000 Hurco VMX-50 CNC Vertical Machining Center Specifications: Control. Ultimax Table Size. 59"x 26" Max Table Load. 3.000 lbs"X" Axis Travel. 50" Y" Axis Travel. 26" Z" Axis Travel. 24" Rapid Traverse Rate(XY/Z) 1.181/787 IPM Spindle Speed. 10.000 RPM Spindle Motor. 24 HP Spindle Taper. CT 40 Tool Stations. 24 Sidemount Machine Weight. 19.200 lbs Equipped With: Ultimax CNC Control Chip Conveyor 10.000 RPM Spindle Rigid Tap Linear Ways Remote Jog Handle All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. ... morePlease verify it’s availability before purchasing! Sp
|
|
|
Hurco KM3P Vertical CNC Mill
For Sale: a fully functional HURCO Model KM3P(1985? with Hurco Ultimax conversational dual screen control. The winner of this sale will also receive a second KM3P that is in storage and used for parts for this machine. All the tool holders are included. We purchased both of these machines new from Hurco in 1984 and 1985. The machine is shown with the head rotated to one side but can be run from any position. The large v block shown on the table is NOT included in the sale. We are taking delivery of new equipment and no longer have floor space for this one. I also have a video of the machine running its warm up cycle. the 3 HSP spindle runs smooth for a machine of this vintage. The ball screws are functional but could use some adjustment or'tramming in' This machine was maintained by Hurco service and has been in service since installed. ... moreThe second machine is in less desirable condition but has many parts that can be used to service this machine for many years to come. Thanks for looking and good luck. The buyer will need to arrange shipping we can provide"lift and load" service.
|
|
|
HURCO CNC MD1 Ultimax
Hurco CNC MD1 ulitmax with some category 40 tooling. This machine was owned by Lentz automotive. And has been in our building under power for the last year. This machine has 21,208 hours on it. The machine is functional. Comes with the full owner's manual. Uses category 40 tooling, features an automatic tool changer.
|
|
|
Hurco Hawk 40 CNC Bed Mill
Hurco Hawk 40 1998 Bed Mill Ultimax Control with 3D. Ultipockets and DXF reader. Power Drawbar Trico Spray Mister Halogen Light Aluminum waster plate. Drill and tapped 1/2-13 with 1/4 dowel holes every 2 inches YouTube of Hurco: Start-up. Warm-up, simple part and shut down. This Hurco operates as intended with no issues. I'm moving and it does not fit the new garage. Hurco is being listed locally. So I reserve the right to end the auction early. Hurco is being sold as is where is. Any questions please contact me. Winner responsible for loading onto truck or trailer using insured rigger. I can help set-up rigger for loading. Purchasing Information: Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer or certified check
|
|
|
Hurco CNC Mill Model KM-3P S/N KDB8013059E
Nice used mill with new LCD monitors 14" x 49" table Spindle Universal Quick Change 60- 4000 RPM Spare board set in rack. Just taken out of service. Will load onto your truck.
|
|
|
1997 Hurco BMC 30 Vertical Machining Center Mill CT40 24 Station ATC Utimax Cnt
1997 Hurco BMC-30 Vertical Machining Center Specifications: Control. Ultimax Dual Table Size. 40" x 16" Max Table Load. 1.100 lbs X Axis Travel. 30" Y Axis Travel. 17" Z Axis Travel. 24" Spindle Nose to Table. 7.8" 28.6" Spindle Speed. 8.000 RPM Spindle Motor. 10 HP Spindle Taper. CAT40 Rapid Traverse Rate. 945 IPM Tool Stations.24 ATC Carousel Equipped With: Hurco Ultimax Dual Control Rigid Tap 24 Position Tool Changer Full Enclosure Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! ... moreSpecifications and features are subject
|
|
|
HURCO BMC-30 VERTICAL MACHINING CENTER W/ CAT40 10 HP SPINDLE
Call Us Today! 626.330.4647| HURCO BMC-30 VERTICAL MACHINING CENTER W/ CAT40 10 HP SPINDLE, Made in USA by Hurco Manufacturing Co. of Indianapolis. Indiana. This is a Hurco Vertical Machining Center in working condition. This machine comes from an injection molding facility that's making space for newer machines. Machining center is fully working. Model# BMC-30 Serial# BC80020690. Features: Hurco Ultimax Control. 2 CRT Screens. RS 232 Port. Two 3.5 Floppy Drives. Graphics. 24 Position Automatic Tool Changer. 10 HP Cat 40 Spindle. Coolant System. Specifications: Table: Work Area: 39.5" x 19.7" Table Size: 47.2" x 25.2" Table Height: 30.5" Max. Table Load: 1100 lbs. Travels: X Axis: 30" Y Axis: 20" Z Axis: 20" Spindle Nose to Table: Minimum: 5.9" Maximum: 26" Spindle: Spindle Speeds: 60 ... moreto 4000 rpm. Spindle Taper: CAT 40 Spindle Motor: 10 HP. Feed Rates: Max Cutting Feedrate: 1 to 150 ipm. Rapid Feedrate: 400 ipm Automatic Tool Changer: Number of Tools: 24 Max. Tool Diameter: 3.2" Max. Tool Length: 10" Max. Tool Weight: 15 lbs. Max. Work Height with 10" Tool: 6" General: Hours: 23.608. Voltage: 208 volts. 3 phase Overall Dimensions: 124" x 152" x 107" tall as shown. Weight: 10.000 lbs. Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please read descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume items come with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payme
|
|
|
Hurco Hawk 5 Vertical Milling Machine
Hawk 5M. Vertical, Max. 3800 rpm Brand: Hurco Model: Hawk 5M Year: 1996 Vertical Machining Center Specifications: TABLE SIZE: 42" X 13" X-AXIS: 31" Y-AXIS: 14" Z-AXIS: 6" KNEE: 15.3" SPINDLE SPEEDS. VARIABLE THROUGH HI/LOW GEAR: 80 TO 3800 RPM SPINDLE TAPER: CAT#40 OVERALL SIZE: 86" L-R) X 80" F-B) X 105" H) WEIGHT: 5.000 LBS ELECTRICS: 240V. 3 PH, 60 CYCLE, 5 HP EQUIPPED WITH: ULTIMAX 3 HURCO SINGLE SCREEN CONTROL G-CODE OR CONVERSATIONAL PROGRAMMING 3-1/2 FLOPPY DRIVE. RS232 PORT HARD WAYS IN GOOD CONDITION AND T-SLOTS ON TABLE FEEL SMOOTH AUTO LUBRICATION SYSTEM POWER DRAWBAR WORK LIGHT MANUALS
|
|
|
HURCO VERTICAL MACHINING CENTER BMC-20 ULTIMAX CONTROL
1989 Hurco bmc-20 in good running condition. Machine has no rust at all and vary well maintained oiled daily new Y axis servo motor and encoder. Main drive motor refurbished.
|
|
|
2003 Hurco VMX-50-40 taper Ultimax 4, 50x26 10K $39,000 no reserve, under power
This item is a used Hurco VMX 50-40 taper machine we are listing for a customer/friend. Our company sold the machine new and have serviced it since 2003. Machine was installed in April of 2004. It is very well equipped. If you are interested you need to come to central KY to see it. It is listed and sold AS IS. It is under power. Since we are listing this for someone else. An inspection can be performed for a fee. This can include overall inspection, Ball bar, and Renishaw Laser. Equipped with: Coolant through spindle. Troyke Indexer and control(never been used) Renishaw NC tool setting Laser probe, 10,000 RPM spindle, Software list: Ultipocket, Probing, DXF, Rigid Tap, Advanced velocity control, Part Probing, Tool Probing, and helical ramp/entry. Although the machine is not in our facility we can provide some history. It ran single shift ... morejob shop style work most of it's life. It did do some production work on aluminum armor during the Iraq war. It comes with a very nice selection of tooling. These are not"picked over" junk holders. But the balance of the tooling the customer kept for themselves. It has a newly refurbished X axis ball screw, and we will install or repair the right screen which has a glitch. KY residents will be required to pay sales tax. Customer is responsible for rigging.
|
|
|
1999 Hurco Hawk 40, 3 Axes CNC Vertical Bed Type Milling Machine, w/ Ultimax SSM
This Machine and Control was Built New in 1999. It is in Excellent Operating Condition. Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" Hurco Model Hawk 40 Vertical Bed Type. Three(3) Axes CNC Milling Machine complete with a Ultimax SSM. 3 Axes CNC Controller S/N 40S-95029019A. You just can't go wrong with this machine. This machine tool was built in the USA by one of that countries premier machine tool builders. The 3 Axes CNC controller is the very desirable Hurco Ultimax 40(Conversational and G-Code) It comes complete with a Power Draw Bar. It's ready to go to work. Specifications for this machine are as follows: Year New: 1999 Serial# 40S-95029019A Location: Ohio Country: USA Machine Condition: Used Excellent Short Description: Hurco Hawk 40/SSM. ... more3-axis CNC Bed Mill. Category: Milling Machines. CNC Vertical, Bed Type Machine Type: Vertical Bed Type. CNC Brand Name: HURCO Voltage: 230 Machine Hours: Unknown Horse Power: 5 Number of Axis: 3 Tooling Included: One Cat 40 Mill Cutter Holder Only Under Power or Operable: Yes Electric Foot Switch: No Coolant System: Yes Maint Record: No Digital Read Out: Yes RPM: 3800 Controls: Hurco Ultimax SSM Machine Size(LxWxH) 65"x60"x88" Machine Weight: 5500 Size of Worktable: 58 x 13 Max Weight of Work Piece: 990* We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load, free of charge. You always buy with confidence at Machine Tools of America. First of all, our descrip
|
|
|
Hurco Hawk 40 3 Axis CNC Vertical Knee Mill Ultimax Control CAT-40 5 HP 2001
2001 Hurco Hawk 40 CNC Vertical Mill Specifications: Control. Ultimax Dual Screen CNC With Conversational Programming Work Table. 58" x 13" Max Table Load. 990 Lbs. X-Axis Travel. 40" Y-Axis Travel. 20" Z-Axis Travel. 20" Spindle Quill Travel. 6" Spindle Quill Diameter. 4.33" Spindle Nose To Table Top. 3.54"23.6" Spindle Center To Face Of Column. 20" Rapid Traverse(X/Y/Z Axis) 400"400"250" IPM Spindle Taper. CAT40 Spindle Motor. 5 H.P. Spindle Speed Max. 80-3.800 RPM Electrical.
|
|
|
Used Hurco KM-3P 3 Axis CNC Knee Mill Vertical Machining Center Manual Ultimax
1988 Hurco KM-P CNC 3 Axis Vertical Mill Specifications: Control. Ultimax With Conversational Programming Work Table. 49" x 14" X-Axis Travel. 24" Y-Axis Travel. 14" Z-Axis Travel. 5" Spindle Speed. 0-4.000 RPM Spindle Taper. Universal Kwik Switch Collet Spindle Motor. 3 H.P. Electrical. 480V. 60Hz, 3-Phase Approximate Dimensions. 5' x 5' x 7'H Equipped With: Ultimax CNC Controller With Conversational Programming Hurco Drive Amplifiers Universal Kwik Change Chuck/Collet/Tool Holder Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a good chance that this item may sell by other means before we take it down from ebay. Please verify ... moreit’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra c
|
|
|
1997 Hurco BMC 4020 "VIDEO"
CONTROL: ULTIMAX TAPER: 40 EQUIPPED WITH INDEXER OR ROTARY TABLE: NO EQUIPPED WITH 5-AXIS CAPABILITY: NO Table size: 48” x 20” Table Travels(X) 40” Y) 20” Z) 22” Table Load Capacity: 1100 lbs Spindle Nose to Table: 5” 30” Spindle speed range: 60-8000rpm Spindle Taper: CAT 40 Spindle Motor: 10HP Rapid Feature: X& Y: 787ipm Z: 59 ipm Max Tool weight: 15 lbs Electric: 220/3/60. QUESTIONS CONTACT STEVE OR MIKE@ 714 892-9800 VIDEO
|
|
|
2007 Hurco VM-1 CNC Vertical Maching Center Mill Ulti-Max 3d Mold Option CT40
2007 Hurco VM-1 Vertical Machining Center Specifications: Control: Ulti-Max Table Size: 30” X 14” Max Table Weight: 750 LBS. X Axis Travel: 26” Y Axis Travel: 14” Z Axis Travel: 18” Spindle Horsepower: 15 HP Spindle Speed: 8.000 RPM Spindle Taper: CT40 Tool Changer: 20 ATC Max Rapid Taverse Rate: 945 IPM Max Contouring Rate: 300 IPM Machine Weight: 8.000 Lbs Machine Voltage: 208-240 VAC Equipped With: Ulti-Max Control 2.37.03e System Software 3D Mold Option DXF Advanced Velocity Control Floppy Drive Graphics Extended NDD Extended Memory 20 Station Side Mount Tool Changer Coolant System*5.430 Hours* Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance ... morethat this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check
|
|
 |