|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States Up for sale is a good used ATI Quick Change Robot Tool Changer 1126H6Z019 / 1141CF0022. Part No.: 1126H6Z019. AT SCC MACHINERY, INC. WE WILL DESCRIBE ... moreANY FLAWS OR DEFECTS OF THE ITEM TO MAKE THE SALE A SUCCESS FOR BOTH PARTIES.
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States Part No.: QC040T. Up for sale is a good used ATI Industrial Automation Robot Tool Changer Part No. The item received may not be the exact item pictured ... morebut all are in like condition. AT SCC MACHINERY, INC.
Buy It Now
Free Shipping Condition: Used Location: Biddeford, United States
Buy It Now
$138.33 Shipping Condition: Used Location: Clinton Township, United States ATI 9121-310DT-DKP-AA2-0-0 TOOL CHANGER ASSEMBLY. MANUFACTURED BY: ATI. ATI 9121-310DT-DKP-AA2-0-0. TOOL CHANGER ASSEMBLY. Warehouse Pickup – We are able ... moreto accommodate pickup at our warehouse. You will need to provide the label and arrange for pickup.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Lafayette, United States The ATC has been refurbished by Stepcraft about 2 months ago.
Buy It Now
Free Shipping Condition: New – Open box Location: Madison, United States DIY tool changer intended for a Tormach 440 style mill. This is NOT a Tormach OEM part and is not factory supported. Sold for parts or repair only - this ... moreis a non-functional part that serves as a base to create your own tool changer.
Buy It Now
$10.75 Shipping Condition: Used Location: Lafayette, United States SKU:420220-7401 K4/593.
Buy It Now
$29.00 Shipping Condition: Used Location: Ann Arbor, United States "Emco FB2 Mill". Condition: Excellent working condition. It's kind of sad really, because I happened to know they were good people with a good product. ... more- This suggestion should not cause anyone to go off the rails!
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States Model number is BMC30DHT. This item was removed from a Hurco vertical machining center. This part was pulled from a working machine. This item was removed ... morefrom aWorking Machine, and is being. We have no way of testing it once it was removed.
Buy It Now
$94.60 Shipping Condition: Used Location: Sandusky, United States Hass tool changer arm 20-0239a 0027 10-7-11 25-0153A Rev A BMS
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Fixed cutter. Vibration Motor. Air Compressor. Handheld Inkjet Printer. 3D Printer. (4) The cutter head base is integrally processed and has high positioning ... moreaccuracy. Reduction ratio. Rosin Heat Press Machine.
Buy It Now
Condition: Used Location: Santa Ana, United States Knee Height on Column 19". Note: Coolant pump needs repair. EZ Systems Machine Reference Number: ez20564. Table Length on Saddle 30½". Machine Weight ... more5800 lbs. We can make you a copy of a very similar machine if needed that will work for you.
Buy It Now
Condition: Used Location: Muskegon, United States (This item was removed from a HURCO. Manufacturer: HURCO. This item was removed from aWorking Machine, and is being. DATE: AUG. 98. More Info NOTE . 5) ... moreLike New Condition. 1) Very Poor.
Buy It Now
$43.63 Shipping Condition: Used Location: Middlebury, United States Removed From A Mazak M-32 MTV414/22 Vertical Machining Center. Weight (lbs, oz): 23. Prefer to pick it up yourself?. Need it urgently?. Call us and we ... morewill do what we can to get it to you quickly. Size: Length: 25 in.
Buy It Now
Condition: Used Location: Lincolnshire, United States Tool Clamping Force. 40 Station (Chain Style) Automatic Tool Changer. High Speed Plus Drive Swivel Head (B-Axis). Swivel Vise (C-Axis) rotates to hold ... morebar, then part-off. Has 360 deg. Table Left to Right (V-Axis) runs parallel to X-Axis.
Buy It Now
Free Shipping Condition: Used Location: Louisville, United States Pulled off 1998 Haas VF-4 (see last picture).
Buy It Now
Condition: Used Location: North Prairie, United States Title: 10 Position Tool Changer for universal use with CAT40 tools. Complete Tool Changer Assembly w/ Motor. or arrange your own pick up. We have a forklift ... moreto load any truck. w/ 1 HP Gear Speed Reducer Motor Unit.
Buy It Now
$12.00 Shipping Condition: Used Location: Ann Arbor, United States Automatic Tool Changer R8 collet and drawbar assembly. with belleville spring washers and tightening nut. - This suggestion should not cause anyone to ... morego off the rails! "Emco FB2 Mill". used with Four Tool Unit Automatic Tool Changer.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States ATC,BT,32 TOOLS;6535 50T. This is a genuine, authentic OEM part. Part Application.
Buy It Now
Free Shipping Condition: Used Location: Valencia, United States 2001 KITAMURA HX400I PALLET 240202. is a machine tool and parts dealer located in Southern California. These parts have been dismantled by our own employees ... morefrom machines at our facility. cp 02-02-24 CP bob.
Buy It Now
Condition: Used Location: Bradenton, United States HAAS OM-2 CNC Vertical Machining Center 30K HSM 4th 2010 #GMT-3680 Reference #GMT-3680 Model # OM-2A Serial # 1077899 Year of manufacture- 4/2010’ Table ... moresize- 10” x 20” X axis travel- 12” Y axis travel- 10” Z axis travel- 12” Table capacity- 250 Lbs.
Buy It Now
Condition: Used Location: Millersburg, United States Part Number LNC8. Model LNC8. Removed from a Okuma LNC8 CNC. Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower ... moreindustries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Schenectady, United States (4) Fanuc Bis 0.5/6000 AC Servo Motors, located at X, Y, Z Axis and tool changer. (2) Fanuc BiSV 20 Servo Amplifier, A06B-6160-H002D, A06B-6160-H002E. ... moreFanuc BiSV 20/20 Servo Amplifier. Fanuc PLC Interface Module, A03B-0819-C011.
Buy It Now
Condition: Used Location: Middlebury, United States Model: HG400I. MPN: HG400I. Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will ... moredo what we can to get it to you quickly. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools and solutions they need to thrive ... morein a dynamic and ever-evolving marketplace. Local Pickup.
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States Machine was early 1990's, S/N SV4-9002032-B. It is a Hurco Automatic Tool Changer - Tool Grabber. This item was removed from a working machine. CAT 40 ... moretooling taper. We have no way of testing it once it is removed.
Buy It Now
Free Shipping Condition: Used Location: Baroda, United States ATI INDUSTRIAL AUTOMATION ROBOTIC TOOL CHANGER MODULE: QC-300 QM0018 This is a new ATI robotic tool changer master with T19 electrical module. 1000 lb ... morecapacity! See ATI Robot Changer Catalog link below:
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States M/N- SABRE 750 ER0. This item was removed from a Cincinnati Milacron Vertical Machining Center. Manufacturer: Cincinnati Milacron. This part was pulled ... morefrom a working machine. This item was removed from aWorking Machine, and is being.
Buy It Now
$117.20 Shipping Condition: Used Location: Clinton Township, United States MANUFACTURER PART NUMBER: QC210T. ATI INDUSTRIAL AUTOMATION QC210T. MANUFACTURED BY: ATI INDUSTRIAL AUTOMATION. TOOL CHANGER. Warehouse Pickup – We are ... moreable to accommodate pickup at our warehouse. You will need to provide the label and arrange for pickup.
Buy It Now
Free Shipping Condition: New Location: Cypress, United States Ratio 1:10. Shaft D:22mm Width 6mm Keyway.
Buy It Now
$77.89 Shipping Condition: New – Open box Location: Clinton Township, United States MANUFACTURED BY: ATI INDUSTRIAL AUTOMATION. THE ITEM MAY HAVE BEEN OPENED BUT HAS NOT BEEN USED. MAY SHOW SIGNS OF STORAGE WEAR. Warehouse Pickup – We ... moreare able to accommodate pickup at our warehouse.
Buy It Now
Free Shipping Condition: New Location: Peoria, United States TOOL:CHANGER;ROBOTIC.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Spindle Motor. CNC Machine Parts. Fixed cutter. Automation Switches. 3D Printer. (4) The cutter head base is integrally processed and has high positioning ... moreaccuracy. Reduction ratio. (2) Adopt high quality limit device and reducer, Longer service life.
Buy It Now
$12.00 Shipping Condition: Used Location: Ann Arbor, United States For Four Tool Unit Tool Changer. "Emco FB2 Mill". It's kind of sad really, because I happened to know they were good people with a good product. - This ... moresuggestion should not cause anyone to go off the rails!
Buy It Now
$10.40 Shipping Condition: New Location: Schaumburg, United States This is a pocket up and down solenoid for a Haas ® Vertical Mill. As Compared to Haas ®PN# 32-5660 / 93-32-5660 / 93-30-11079 / 93-30-0389. All our parts ... morehave been tested for fit and are functional on Haas Machining Centers ®.
Buy It Now
$10.40 Shipping Condition: New Location: Schaumburg, United States This seal is for the bottom of the cambox. Tool Changer Cambox Seal as Compared to Haas® PN# 57-0059 VF-Series. We have parts specialists standing by ... moreto assist you! All our parts have been tested for fit and are functional on Haas Machining Centers ®.
Buy It Now
Condition: Used Location: Sarasota, United States This 2019 UMC-750SS, is pristine. Professionally installed by HFO Tampa and ball bar tested/no issues whatsoever. There is very easy access to the machine.Nothing ... moreneeds to be moved. Specs: X Axis Travel: 30".
Buy It Now
$10.00 Shipping Condition: New Location: Trumbull, United States Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts". FOR THE FOLLOWING MACHINES.
Buy It Now
Free Shipping Condition: New Location: Hidalgo, United States
Buy It Now
Free Shipping Condition: New Location: Malaysia IFS:BOX 9C.
Buy It Now
Condition: Used Location: Novi, United States Tool Changer Capacity 30.
Buy It Now
$45.00 Shipping Condition: New Location: Trumbull, United States NEW BRIDGEPORT CAT40 COMPLETE (22 PC) CAROUSEL BP 22386400. Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts". FOR THE FOLLOWING MACHINES.
Buy It Now
$51.47 Shipping Condition: New Location: Clarklake, United States We have found our carousel disk to retain that tool holder even after a rigorously long cycle. Well it demonstrates 1. Our product will not stop future ... morecrashes from happening. If you want the OEM's carousel tool changer instead of ours, that's fine.
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools and solutions they need to thrive ... morein a dynamic and ever-evolving marketplace. Local Pickup.
Buy It Now
$25.00 Shipping Condition: Used Location: Ann Arbor, United States It's kind of sad really, because I happened to know they were good people with a good product. "Emco FB2 Mill". - This suggestion should not cause anyone ... moreto go off the rails! Emco Compact 10. Emco Compact 5 (or Sears Craftsman).
Buy It Now
Condition: Used Location: Muskegon, United States This item was removed from a SODICK EDM. Manufacturer: SODICK. This item was removed from aWorking Machine, and is being sold in good condition unless ... moreotherwise stated! Weight: 350 Lbs. NOTE .
Buy It Now
Condition: Used Location: Middlebury, United States Removed From A 1999 Takumi V10A Vertical Machining Center Serial No. Unless otherwise specifically agreed to in writing by. Tested and works as it should. ... morePrefer to pick it up yourself?. Need it urgently?.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. . TRM3016. Retention Knob. MAS 60. Tool Capacity / Type. 16 / Carousel. AUTOMATIC TOOL CHANGER. Tool Shank. . CT40. Tool Length. 11". Tool Weight. ... more10 lbs.
$38.58 Shipping Condition: Used Location: Middle Village, United States
Buy It Now
$52.65 Shipping Condition: Used Location: El Paso, United States
Buy It Now
Condition: Used Location: Canada 1994 Matsuura MC-800 VF VERY CLEAN! Table Size…20" x 45.3" X Travel…31.5" Y Travel…17.7" Z Travel…19" Spindle Speed…8000 RPM ... moreTaper…BT-40 Tool Changer…30 Dimensions…156" x 139" x 113" Weight…15.000 lbs Equipped With: Yasnac I80 Control. High Pressure Coolant, Chip Conveyor. If you have any question. Please contact sales at 253-830-4722 or email CapitalEquipmentInc@hotmail.com Shipping: Buyer is responsible for freight and rigging; arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final Small items are shipped via UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any questions. Please contact me. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144ae6065c1-0x10b-
Buy It Now
Condition: Used Location: Middlebury, United States Removed From A Victor CNC Lathe Model TNS-3H Serial No. FA-1404 Year 1989. Size: Length: 26 in. Width: 33 in. Height: 23 in. Unless otherwise specifically ... moreagreed to in writing by. Prefer to pick it up yourself?.
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States These are for CAT40 Holders! Removed from a Fair Friend / Feeler vertical machining center. This part was pulled from a working machine. This item was ... moreremoved from aWorking Machine, and is being. We have no way of testing it once it was removed.
Buy It Now
Free Shipping Condition: Used Location: Valencia, United States 2001 FANUC ROBODRILL ALPHA A-T14IA PALLET 240202. is a machine tool and parts dealer located in Southern California. These parts have been dismantled ... moreby our own employees from machines at our facility.
Buy It Now
Condition: Used Location: Muskegon, United States This item was removed from a Sharnoa Vertical Machining Center. Manufacturer: Sharnoa. Model Number: SDC 30. Model #: SDC 30. This item was removed from ... morea working machine, and is being. Weight: 660 Lbs.
Buy It Now
Condition: Used Location: Bradenton, United States Model: HAAS VF-2D (2004). HAAS VF-2D CNC Vertical Machining Center 20 H.P. 2005’ Prewired 4th # GMT-3668 Reference # GMT-3668 Model # VF-2D Serial # 39093 ... moreYear of manufacture- 12/2004’ Table working surface- 14” x 36” Table travel, X-axis (longitudinal)- 30” Table travel, Y-axis (cross)- 16’’ Vertical column travel (Z-axis)- 20’’ Minimum/Maximum distance, spindle nose to table- 4’’/24’’ Spindle taper- CAT-40 Spindle speeds- 0 – 7500 R.P.M. Maximum weight on table- 3,000 Lbs.
Buy It Now
Condition: Used Location: Millersburg, United States Removed from a Okuma LC20-25C CNC. Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools ... moreand solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
$73.37 Shipping Condition: Used Location: Lockport, United States This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the ... moresale. This item is to be used for its intended purpose.
Buy It Now
$30.00 Shipping Condition: For parts or not working Location: Lawton, United States This is a partial setup for an industrial tool changer from a government facility. ATI model QC021T and K12T. Message us with any questions.
Buy It Now
$85.00 Shipping Condition: Used Location: Plattsburgh, United States RES10M ATI INDUSTRIAL quick tool changer REP7-M.
|
|
|
|
BENCHMAN CNC MILLING MACHINE with 4th axis+ TOOL CHANGER
I offer a nice Benchman XT cnc milling machine/ machining center. It comes with 4th axis indexer. Tool changer(20 tools I believe) a good selection of toolholders. Also encludes the origional computer and control software windows based. I also have the Cam software sold for it but you will need to buy licence as it on another computer. I have a origional manual and some documents. I am a watch and clock maker we have other(small) cncs I bought this but never learned to use it or learned the software to br honest its way to much machine for me and takes up room I badly need. To the best of my knowledge it works fine it was running when I bought it. I can demo it jogging, computer works fine but selling it as is no returns as I I dont know how to run a program or provide tech support. I offer it with a low reserve. The catch- its in a commercial ... morebuilding I cannot ship it period! I have a small lift that will take it off the table and wheel it to a door you will have to pick it up or send rigger that will help and load it. It took 6 men to carry it in. We have no loading dock. Once again cant ship will need help to get it to your vehicle. Located in N/W Ohio Lima 45805.
|
|
|
2004 Haas VF2 Side Mounted Tool Changer Low Hours CNC VF 2 No Auger
2004 Haas VF2 Equipped With 4958 Spindle Hours Side Mount 24 ATC 10.000RPM 1000 IPM Rapids Prog Coolant Nozzle TRAVELS X Axis, 30" Y Axis, 16" Z Axis, 20" Spindle Nose to Table(~ min) 4" Spindle Nose to Table(~ max) 24" TABLE Length, 36" Width, 14" T-Slot Width, 5/8" T-Slot Center Distance, 4.92" Number of Std T-Slots, 3 Max Weight on Table(evenly distributed) 3000 lb SPINDLE Max Rating, 30 hp Max Speed, 8100 rpm Max Torque, 90 ft-lb@ 2000 rpm Drive System, Inline Direct-Drive Max Torque w/opt Gearbox, 250 ft-lb@ 450 rpm Taper, CT or BT 40 Bearing Lubrication, Air/Oil Injection Cooling, Liquid Cooled FEEDRATES Rapids on X 1000 in/min Rapids on Y, 1000 in/min Rapids on Z, 1000 in/min Max Cutting, 650 in/min AXIS MOTORS Max Thrust X, 2550 lb Max Thrust Y, 2550 lb Max Thrust Z, 4200 lb TOOL CHANGER ... moreType, Carousel(SMTC Optional) Capacity, 20 Max Tool Diameter(full) 3.5" Max Tool Weight, 12 lb Tool-to-Tool(avg) 4.2 sec Chip-to-Chip(avg) 4.5 sec GENERAL Air Required, 4 scfm. 100 psi Coolant Capacity, 55 gal 7300 lbs Machine Weight Call Now For More Info Maury Cohn 1 800 888 4312
|
|
|
Fadal VMC 15-XT CNC Vertical Machining Center 20 Position Tool Changer
` QUALITY NEW AND USED CNC AND MANUAL MACHINERY INCLUDING MILLS AND LATHES. CENTROID, ANILAM, FANUC, CHECK US OUT FOR TOOLS AND SUPPLIES CHARNEY MACHINE& TOOL. INC 160 84th STREET SW BYRON CENTER. MI 49315 616-455-3800 Fadalm VMC 15-XT Vertical Machining Center Extended X Travel 30" x 16" X 20" Travels 20 POSITION TOOL CHANGER. Fadal 88HS CNC Control Our Stock Number 1320-050813 Machine Description Fadal VMC15XT Vertical Machining Center w/ CNC 88HS Control with Graphics Year: 1999 Serial: 9911405 Specifications: are accurate to the best of our knowledge) CONTROL FADAL 88HS w/Graphics TABLE SIZE 34″ X 16″ MAX TABLE LOAD 2.000 LBS X-AXIS TRAVEL 30″ Y-AXIS TRAVEL 16″ Z-AXIS TRAVEL 20″ SPINDLE TAPER CAT 40 SPINDLE SPEED 7.500 RPM SPINDLE MOTOR 10 HP CUTTING FEED RATE 0.01 to 375IPM RAPID TRAVEL RATE(X.Y,Z) 400 IPM TOOL CHANGER ... more21 POSITION MACHINE WEIGHT 5.500 LBS MACHINE DIMENSIONS 77″L X 95″W X 104″H This machine is in very good working order. You may inspect under power. in Byron Center. MI 49315 Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the au
|
|
|
EAGLE 500 3 AXIS CNC VERTICAL KNEE MILL ANILAM 1400 CONTROLS TOOL CHANGER
THIS AUCTION IS FOR A USED EAGLE 500 VERTICAL KNEE MACHINING CENTER WITH ANILAM SERIES 1400 CONTROLS. $$$$ PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. $$$$ YOU CAN SEE IT UNDER POWER IN MY WAREHOUSE IN LOUISVILLE.KY. MILL IS IN GOOD USED WORKING CONDITION. SPECIFICATIONS: TABLE: 16" x 51" X-AXIS TRAVEL: 33" Y-AXIS TRAVEL: 16" Z-AXIS TRAVEL: 6" POWER KNEE TRAVEL: 16" SPINDLE: 40(STANDARD) SPINDLE SPEEDS(VARIABLE) LOW- HIGH RANGE: 80- 3800 RPM MOTOR: 5 HP/ 3 PH/ 220/440 V EQUIPMENT INCLUDED: ANILAM SERIES 1400 3-AXIS CNC CONTROL COOLANT SYSTEM. TOOL CHANGER. MACHINE WEIGHT APROX. 6500LBS. PLEASE GIVE US A CALL AT 1-812-968-5230. FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? WITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT ... moreTERMINAL. I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HAAS CNC VERTICAL MILLING MILL MACHINE VF2 VF-2 - TOOL CHANGER - VIDEO
HAAS VF-2 CNC VERTICAL MILL- LOW RESERVE! MFG NEW 1992 This machine is in decent overall shape considering its age. We have this machine under power and can be inspected anytime. Auction does not include any tooling or vise seen in pictures or video. Machine spindle only runs in higher gear so over 1000 RPM. Spindle bearings are a bit rough so they may need some attention soon. All motors. Tool changer, coolant pump, etc working. New windows being put on doors currently which is why the video does not show any doors. Please feel free to ask any questions you might have. Specifications: Travels 30" x 16" x 20" Table Size 36" X 14" Spindle Nose to Table 4" 24" Max. Table Weight 3.000lbs. Spindle Speed 7.500rpm, Spindle Taper CT-40, Tool Changer 16 Station. Umbrella Style, Power 208/230V-60H-3P, Machine Weight ... more7.000lbs. Features: Coolant Pump& Tank, Terms: Wire transfer or check must clear prior to the machine being released for loading. Florida sales tax of 6.5% will be applied to all purchases residing in Florida. Payment must be made within 48 hours of completed listing. Machine is being sold as is with no returns however we encourage the buyer to come and inspect the machine so they can be fully confident in purchase. Loading Fees: A $600 rigging fee will be charged if the buyer would like us to load the machine on their truck. This includes preparing and locking the machine head as well as loading the machine on a truck. Trucking is responsibility of the buyer. I can provide a quote for complete transport cost including rigging and trucking if I am provided with the zip code where this will be going. Please feel free to email or call me with any questions you might have. This machine is under power and can be fully inspected at any time. Please check out this quick video I have uploaded to YouTube so you can see the machine working: Feel free to Email me with any questions at: mpunlimitedusa@gmail.com
|
|
|
Deckel Maho DMU60T CNC Vertical Milling Machine with automatic tool changer.
Up for sale is a Deckel Maho DMU 60T CNC Vertical Milling Machine with automatic tool changer. This machine is a ridged machine with the ability to make high precision parts. Currently machine is under power; however. Machine needs a servo drive power supply and servo drive card to have it back up and running. Machine comes with Coolant tank, chip conveyer, electrical diagrams, and user manuals. Buyer is responsible for rigging and shipment. Machine sold as is, where is. Please feel free to ask questions or stop buy to check it out. Machine is located in Campobello SC. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1437df124a9-0xfd-
|
|
|
Mori Seiki MV-40 B Vertical Machining Center CNC ATC VMC Tool Changer Fanuc
Mori Seiki MV-40 B Vertical Machining Center Specifications: Travels: X.31.5" Y.16.1" Z.20.1" Table Size.43.3" x 17.7" Max Table Load.1540 Lbs Table Top to Spindle.5.9" 26" Rapid Traverse: X.787 IPM Y.787 IPM Z.591 IPM Cutting Feed Rate.0.1- 197 IPM Automatic Tool Changer.20 Positions Spindle Taper.Cat 40 Spindle Speed.8000 RPM Spindle Power.10 HP Dimenisons.108" x 90" x 105" 14,200 LBS Equipped With: MF-M4(Fanuc) CNC Control 20 Station Automatic Tool Changer Coolant For More Information Please Call Maury Cohn 1 800 888 4312
|
|
|
FADAL VMC 15 VERTICAL MACHINING CENTER 21 POSITION TOOL CHANGER RIGID TAP
Fadal VMC 15 Vertical Machining Center 88HS CNC Control Our Stock Number 1372-021714 Machine Description Fadal VMC15RT Vertical Machining Center Year:1995 Serial: 9508637 Specifications: are accurate to the best of our knowledge) Control. Fadal CNC 88HS Table Size. 29.5" X 16" Travels: X-Axis. 20" Y-Axis. 16" Z-Axis. 20" Spindle Speed. 0- 7500 rpm Spindle Motor. 15 HP Spindle Taper. CAT 40 Tools. 21 ATC Rigid Tapp 21 Position Tool Change Upgrade Fadal CNC88HS Control Machine Weight(approx. 5.800 LBS Machine Dimensions: 75" W x 77" D x 106" H CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) ... moreGround to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty. Batteries are not covered by warranty. If item does not perform to intended description in ad. Charney Machine& Tool. Inc. reserv
|
|
|
FADAL VMC4020 VERTICAL MACHINING CENTER 20 POSITION TOOL CHANGER
Fadal VMC 4020A Vertical Machining Center Rigid Tapping. High Speed Multi Processor Control Our Stock N umber 1373-022014 Machine Description Fadal VMC 4020A CNC Vertical Machining Center With CNC88HS Multi Processor Control Year: 2000 Specifications: are accurate to the best of our knowledge) CATALOGUE SPECIFICATIONS: Table Working Surface. 48" x 20" Table Load Capacity. 1.500 LBS Longitudinal Travel(X-Axis) 40" Cross Travel(Y-Axis) 20" Vertical Travel(Z-Axis) 20" Spindle Nose to Table. 4" 24" Rapid Traverse Rate(X& Y-Axes)700 IPM Rapid Traverse Rate(Z-Axis) 600 IPM Tool Storage Capacity. 21 Spindle Horsepower. 15 HP Spindle Speeds Range.75- 7.500 RPM Spindle Taper. 40 Cat Electrics.460/3/60 Approximate Machine Dimensions. 87" x 116" Approximate Machine Height.95" Approximate Machine ... moreWeight.10.500 LBS EQUIPPED WITH: Fadal CNC88HS CNC Multi Processor CNC Control. RS-232 Port, Multiple Part Program Storage. Self Diagnostics. 21 Station Automatic Tool Changer. Manual Pulse Generator. Axis Error Compensation. Rigged taping Cutter Compensation. Full Enclosure. Coolant No Tooling included. CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 co
|
|
|
2006 MILLTRONICS VM16 VERTICAL MACHINING CENTER SIDE MOUNT TOOL CHANGER
2006 Milltronics VM16 Centurion 7 Control. Side Mount Tool Changer Vertical Machining Center Rigid Tapping. High Speed Control Stock# 1364-111913 Machine Description Milltronics VM-16 Centurion 7 16 Position Side Mount Tool Changer Year:2006 Specifications: are accurate to the best of our knowledge) Travel. X Axis-30” Y Axis-16” Z Axis-20” Rapid Rate-1.000/800 IPM Table Size—16” x 45” Table Load-1.500 lb. Max. Spindle Taper-Cat 40 Spindle Speed-8.000 RPM Spindle Motor-18/12 HP Auto.Tool Changer-16 Station Electrics-230V/3ph/60hz Weight. Approx-9,000 lbs Equipped with; Centurion 7 Control with Conversational Programming· 16 Tool Automatic Tool Changer· Coolant· Chip Augar· Rigid Tapping· Full Enclosure No Tooling included. CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. ... moreAny questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty. Batteries are not covere
|
|
|
2006 FADAL VMC 4020 10,000rpm Horizontal 24 Tool Changer
FADAL VMC 2040 10.000 rpm Multi processor cnc machining Never been crashed Everything works Year 2006 Posted with eBay Mobile
|
|
|
Bostomatic 312 4 axis CNC Tool Changer Hi Speed Spindle w/Tooling
I apologize for the long description. This is a used Bostomatic model 312 CNC machine. Recently excessed by a major local organization. It was used in a research facility and never for production. It has every bell and whistle. And every option that was available. The tooling is all for fairly small diameter tools. So the machine apparently was never run very hard. Used for prototyping small parts. It is exceptionally clean.table. Inside cabinets, etc. There is some minor surface rust on the indexer-probably from water soluble oil that didn't get wiped down. No cut wires, and all the sheet metal, wire chases, pumps, chiller, etc. are included. Some parts are not shown in the photos as I can only show 12 pictures. I combined a bunch of photos to show most aspects of the machine.sorry for long load times. As far as I can tell after going ... moreall over it. It is complete. I was told it was functional before being decommissioned. I am not capable of(resonably easily) putting this machine back in to running order. And the hard drive was pulled. So, I've listed the machine for parts/repair. It is up to you to put humpty dumpty back together. This would also be an excllent candidate for a controller upgrade. As the cast iron is high quality, and the ATC and 4th axis, along with the vast tooling included would make it a(relatively) inexpensive full-blown CNC center. ================ Bostomatic 312 CNC. Model 300-3. Serial number MM-590. Manufacture date 1990. The machine consists of 3 major parts: The Mill The SPC control cabinet The Electrics cabinet ================ MILL Bed mill with 7000 rpm spindle. 2Hp belt drive spindle. Motor is 208/240v. 3 phase Quill is"Boston Digital 40-Taper" with 5/8-11 pull-stud/ retention-knob thread and is is compatible with a Erickson Quick-Change 40 Taper(NST 40? Hydraulically operated power drawbar Flat ways. Nearly perfect-a little residual gunk on them. Table is 12" x 42" Not a single drill or cut mark on it. Travels. 18" x 12" x 12" Flood coolan
|
|
|
Bostomatic 312 4 axis CNC Tool Changer HS Spindle+Tooling+Renishaw TP1s Probe!
I apologize for the long description. Note-this listing has been up for a few days. I just revised it. As i forgot to mention the Renishaw 5 axis probe system that's included! ============================================== This is a used Bostomatic model 312 CNC machine. Recently excessed by a major local organization. It was used in a research facility and never for production. It has every bell and whistle. And every option that was available. The tooling is all for fairly small diameter tools. So the machine apparently was never run very hard. Used for prototyping small parts. It is exceptionally clean.table. Inside cabinets, etc. There is some minor surface rust on the indexer-probably from water soluble oil that didn't get wiped down. No cut wires, and all the sheet metal, wire chases, pumps, chiller, etc. are included. Some ... moreparts are not shown in the photos as I can only show 12 pictures. I combined a bunch of photos to show most aspects of the machine.sorry for long load times. As far as I can tell after going all over it. It is complete. I was told it was functional before being decommissioned. I am not capable of(resonably easily) putting this machine back in to running order. And the hard drive was pulled. So, I've listed the machine for parts/repair. It is up to you to put humpty dumpty back together. This would also be an excllent candidate for a controller upgrade. As the cast iron is high quality, and the ATC and 4th axis, along with the vast tooling included would make it a(relatively) inexpensive full-blown CNC center. ================ Bostomatic 312 CNC. Model 300-3. Serial number MM-590. Manufacture date 1990. The machine consists of 3 major parts: The Mill The SPC control cabinet The Electrics cabinet ================ MILL Bed mill with 7000 rpm spindle. 2Hp belt drive spindle. Motor is 208/240v. 3 phase Quill is"Boston Digital 40-Taper" with 5/8-11 pull-stud/ retention-knob thread and is is compatible with a Erickson Quick-Change 40 Taper(NST 40? Hydraulically operated po
|
|
|
FADAL VMC3016HT VERTICAL MACHINING CENTER 20 POSITION TOOL CHANGER
Fadal VMC 3016HT Vertical Machining Center High Speed Control. Graphics Our Stock Number 1343-091113 Machine Description Fadal VMC 3016HT CNC Vertical Machining Center Year: 1995 Serial# 9502115 Specifications: are accurate to the best of our knowledge) X Axis 30" Y Axis 16" Z Axis 20" RPM 7500 RPM Rapid Rate X/ Y 900 IPM Rapid Rate Z 700 IPM Weight 10.500 lbs ATC Capacity 21 HP 15 TABLE SIZE 39" X 16" Tool Taper Cat 40 Electrical 208/230/480 V 3PH DIMENSIONS(W x L x H) 98" x 77" x 90" Equipped With: High Speed CPU 32 MP Control 1000 Blocks per second Ethernet Graphics 4 th Axis Pre-wire Floppy Disk RS-232 Brand New Baldor Spindle Drive New Spindle Belts CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power.
|
|
|
MILLTRONICS VM24 VERTICAL MACHINING CENTER 24" Y TRAVEL 20 pos Tool Changer
Milltronics VM24 Vertical Machining Center Rigid Tapping. Conversational Programming, Nice 24" Y Travel. 20 Pos Tool Changer Our Stock Number 1383-042414 Machine Description MILLTRONICS VM24 CNC VERTICAL MACHINING Centurion 6 CNC Control Year: 1999 Serial# 5720 Specifications: are accurate to the best of our knowledge) TABLE SIZE 24” X 45” TRAVELS– XYZ 40” X 24” X 24” THROAD DIST SPINDLE TO COLUMN 24” SPINDLE TO TABLE TOP 4 ¼” TO 28 ¼” SPINDLE MOTOR 15 HP SPINDLE TAPER CT-40 SPINDLE SPEEDS 6000 RPM RAPIDS– X. Y& Z 800 IPM FEEDRATE RANGE.1 TO 300 IPM ATC# OF POCKETS 20 ELECTRICS 3/60/220 V WEIGHT. APPROX 11.000 LBS EQUIPPED WITH: CENTURION 6 CNC CONTROL CONVERSATIONAL PROGRAMMING LCD DISPLAY COLOR 3-D GRAPHICS RS232 PORT AND 3 ½” FLOPPY DRIVE CHIP AUGER FLOOD COOLANT FULL ENCLOSURE AUTOMATIC LUBRICATION No Tooling included. ... moreCONDITION: GOOD This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty.
|
|
|
2002 Haas Toolroom Mill with 10 tool changer
2002 Haas Tool Room Mill X- Axis: 30" Y- Axis: 12" Z-Axis: 16" Table: 47.75" x 10.5" Spindle Speed: 4,000 RPM, 7.5 Horse power Bought new by me. Excellent Condition. Single Phase. 10 CAT 40 station tool holder. Includes tool cart and all cat 40 tool holders. 5 Kurt vices. 2 match 6" and 2-8" one Kurt Air vice. Large Knee blocks. High speed(24,000 RPM) spindle. Will load on your transport.
|
|
|
HAAS VM2 CNC Mill Machine 41 tool changer ethernet cat 40 new in 2-2012
We are the original owner and machine cost $96.000 new. Used for aluminum and plastic most of the time. There is nothing wrong with this mill. We are just upgrading to a bigger mill. The machine has about 1200 cutting hours and is like new. The 2 machining vices and all tooling in the pictures is not included. Machine only however it comes with a wireless work tool setter and wireless probe by Renishaw that goes with machine. Shown in the pictures. If you would like to come by and see it.Still in everyday operation. Just contact us by email, if you would like to contact us by phone please send us your number. We do have good contacts on rigging. We are asking for $72.000 or the best offer. All shipping and rigging responsibility of buyer. Thank you, Peter.
|
|
|
HAAS VF11 / 50 2008 VERTICAL MACHINING CENTER 20 POSITION TOOL CHANGER
Haas VF11/50 2008 Vertical Machining Center 1391-071114 Year: 2008 Machine Description VF-11/50 Vertical Machining Center; 120" x 40" x 30" 3048 x 1016 x 762mm) 50- taper geared-head. 30 hp(22.4 kW) vector drive, 7500rpm. 30+1 side- mount tool changer. 360 ipm(9.1 m/min) X rapids, 600 ipm(15.2 m/min) Y& Z rapids. Automatic chip auger, programmable coolant nozzle. Color remote jog handle. 15" color LCD monitor, USB port. 1 MB program memory, rigid tapping and 95-gallon(360 liter) flood coolant system. Outriggers standard. Anchor kit highly recommended for installation. HIL High-Intensity Lighting; dual halogen external lights TSC Through-Spindle Coolant. 300 psi(21 bar) WIPS-R-EC Wireless Intuitive Probing System; Renishaw wireless tool-setting probe and Renishaw wireless work offset probe; includes macros, spindle ... moreorientation and coordinate rotation and scaling 4AXBL 4th-Axis Drive and Wiring only. For brushless-type rotary tables 5AXBL 5th-Axis Drive and Wiring only. For AC brushless-type rotary tables HRT450 450 mm(17.7" Servo Rotary Table. 7.5" Thru-Hole CK-16 16" 3-Jaw Scroll Chuck with 8-5/8" Bore. Adapter plate, Mounting bolts/T-Nuts. And(1) Set of Hard Jaws HTS11.5 Manual Tailstock. 11.5" 292 mm) center height CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts wil
|
|
|
HAAS CNC MINI MILL VF VERTICAL MACHINING CENTER 4TH AXIS 10 PSTION TOOL CHANGER
2004 Haas Mini Mill Vertical Machining Center Rigid Tapping. 4th Axis Drive Our Stock Number 1392-071414 Machine Description Haas Mini Mill CNC Machining Center w/4 th Axis Drive Year: 2004 Serial# 36346 Specifications: Control. Haas Table Size. 36” X 12” Table Capacity. 500 Lbs. X Axis Travel. 16” Y Axis Travel. 12” Z Axis Travel. 10” Spindle Horsepower. 7.5 HP Spindle Speed. 6.000 RPM Spindle Taper. CT40 ATC. 10 Tools Tool Change Time(Tool/Tool) 3.6 Secs. Rapid Traverse. 600 IPM Max. Cutting Feedrate. 500 IPM Max. Tool Weight. 12 Lbs. Machine Weight: 3.400 Lbs Equipped With: 4 th Axis Drive and Pre-Wire High Flow Coolant Pump Kit Work Light 3.5" Floppy Drive Rigid Tapping This machine looks and runs like new. We can help coordinate shipping. CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. ... moreAny questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground t
|
|
|
2005 HAAS CNC MINI MILL VF VERTICAL MACHINING CENTER 10 PSTION TOOL CHANGER
2005 Haas Mini Mill Vertical Machining Center Rigid Tapping. Programmable Coolant Servo Time: 16516 Motion Time: 4604 Spindle Time: 4785 Our Stock Number 1393-072814 Machine Description Haas Mini Mill CNC Machining Center Programmable Coolant Year: 2005 Serial# 41657 Specifications: Control. Haas Table Size. 36” X 12” Table Capacity. 500 Lbs. X Axis Travel. 16” Y Axis Travel. 12” Z Axis Travel. 10” Spindle Horsepower. 7.5 HP Spindle Speed. 6.000 RPM Spindle Taper. CT40 ATC. 10 Tools Tool Change Time(Tool/Tool) 3.6 Secs. Rapid Traverse. 600 IPM Max. Cutting Feedrate. 500 IPM Max. Tool Weight. 12 Lbs. Machine Weight: 3.400 Lbs Equipped With: Programmable Coolant High Flow Coolant Pump Kit Work Light 3.5" Floppy Drive Rigid Tapping This machine looks and runs like new. We can help coordinate shipping. CONDITION: VERY GOOD This machine is ... morein very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All ord
|
|
|
Milwaukee-Matic 1015 Horizontal MFG Center with 6 Pallets, 60 Tool Changer, etc.
Milwaukee-Matic 1015 Horizontal Manufacturing Center offering 6 Pallets. 60 Tool Changer, Chip Conveyor System, Hydraulic APU, 1 Collet& All Manuals. My plans were to make the ultimate CNC machining center by converting the fully functional logic over into the latest USB Centroid/ Gecko servo controllers. It was owned by Raytheon at no expense spared; highly maintained when fully operational. And will be again once all hooked back up professionally. A complete and operational horizontal machining center with full documentation; including interesting. Possibly classified component tapes. Worked great under power prior to move. Plant was decommissioned. It just needs to be hooked back up professionally. Now I have decided to serve other business pursuits; plus I wish to donate proceeds to a great cause. Unbolts& Breaks down into smaller ... moremanageable units. Sold as is. Where is. Any Q's? Call or Text: Tyson. Serious Inquiries Only. 559-560-7032. Serious Inquiries Only. Specs: KEARNEY& TRECKER HORIZONTAL CNC MACHINING CENTER S/N-8286199_ MODEL MM 1015 CONTROLLER KEARNEY& TRECKER TABLE SIZE 18" x 18" TABLE TRAVEL X 24" TRAVEL Y 24" TRAVEL Z 20" RAPID TRAVERSE X Y Z 500 IPM PROGRAMMABLE FEEDRATES.1-500 IPM SPINDLE SPEEDS 4- 4000 RPM SPINDLE MOTOR 15 HP SPINDLE TAPER CAT 50 ELECTRICAL REQUIREMENTS 230/460V. 3PH ACCESSORIES INCLUDED 4TH AXIS PALLET SYSTEM RS- 232 PORT This is a really nice CNC machining center with full 4th axis and pallet system. This machine came out of a major electronic manufacturer and has been extremely well maintained. If you are looking for a nice CNC machining center at a low price. This is the one! This machine is in Excellent condition and was seen producing parts with no problems! This is an opportunity to own a High Production Machine at a very low cost!
|
|
|
Clausing Storm VMC-1020SF w/ 10K RPM & Side Mounted Tool Changer - ID#103612
2005 CLAUSING STORM VMC-1020SF FANUC Oi-MC ID# 103612 INSPECT UNDER POWER AT OUR DUNDEE. FL FACILITY SPECIFICATIONS Table Size- 47.24" x 19.68" Table Load Capacity- 2.200 Lbs Table Top to Spindle Nose- 5.7" to 27.76" X-Axis Travel- 40.15" Y Axis Travel- 20" Z Axis Travel- 22" Spindle Taper- CAT#40 Spindle Speed- 80 to 10.000 RPM Spindle Motor- 20 HP Tool Magazine Capacity- 24 Station Side Mount Maximum Tool Diameter/ Length/ Weight- 7.08" x 11.81" x 17.6 Lbs Rapid Traverse Rates- 945 IPM Cutting Feed Rates- 393 IPM Machine Dimension(LxWxH) 117" x 105" x 96" Machine Weight(Approx. 11.464 Lbs EQUIPPED WITH Side Mounted Tool Changer w/ Swing Arm 10K RPM Spindle Spindle Chiller Unit Rigid Tapping Chip Auger Conveyor(3) Color Status Condition Lights Remote Jog Handle PCMCIA Card Interface ... moreUser Macro Graphic Function Flood Coolant System RS-232 Port Interface All Boxed Way Design All Available Manuals PAYMENTS ACCEPTED Paypal. For other payment options please contact Christina Ferguson at(863) 353 2693 or Toll Free at(855) 827 1387. We have the right to resell the item if it is not paid in full within(10) days. SHIPPING This machine is sold FOB"Buyer's Truck" All machines MUST ship on an Air-Ride Equipped Trailer(completely covered with tarps) We are more than happy to assist you in making arrangements to pick up your item. Please contact us for shipping& rigging quotes at(863) 353 2693 or Toll Free at(855) 827 1387. Shipping Dimensions Machine- 117" x 105" x 96" 1) Chip Conveyor- 125" x 58" x 40" Item will ship from Dundee. FL 33838 WARRANTY This machine is sold with a"START-UP GUARANTEE" In order to qualify it must be shipped on an Air-Ride Equipped Trailer and covered 100% with tarps. It MUST be put to power by a"qualified technician" within(5) Days of delivery. If these stipulations are not met then warranty is null and void. All costs involved to return the item is the"Buyer's&qu
|
|
|
LeBlond Makino 3 Axis CNC Milling Machine FNC74 Fanuc 6M Model B 20 tool changer
LeBlond Makino FNC74 CNC Mill Table Size = 43.5” x 22” Load capacity = 2200 pounds. X travel = 28” Y travel = 18” Z travel = 18” Spindle taper = CAT40. Feed rates = 0-160 IPM. Tool Capacity = 20 DOM = 07-1983. This 3 axis CNC mill has Fanuc 6M Model B control installed. It is in good condition and proper working order. The screen is bright and easy to see. Some of the button covers are in poor condition but all buttons do work. Manuals for the control and the machine are included. Also included is a unit for downloading programs from PC to machine called Secure DNC which enables you to transfer programs from PC to machine via USB thumb drive. It makes the programs very easy to load. All axis' move properly and smoothly. The spindle runs smooth in both high and low gear while cutting materials with ease leaving a beautiful finish. It accepts ... moreCAT40 tooling which is easily obtainable through places such as ebay for reasonable prices. The lube system was replaced in the past with an aftermarket unit and is working properly. The hydraulics function properly. The guards which go around the table are missing. I do have what appears to be the lower portion of this that I will include with the machine that could be reconstructed. The automatic tool changer can hold 20 tools and is in proper working order. Vice seen in pictures is not included. This machine is ready to start making parts! It is connected to power and ready for demonstration/testing. Contact me to test it out. You will like how well it operates. It is heavy and will require some machine skates to get it in front of my bay door and then a large forklift to move it out of the building and onto your truck/trailer. I do not have the skates or a forklift big enough to move it so the wi nning bidder must provide insured rigging and moving services.
|
|
|
hurco cnc milling machine knee mill kmc-3p atc 3 axis tool changer coolant
The Mighty Hurco. Hurco machines are known for their rigidity and durability. The iron on this machine is like a new machine. This machine is equipped with a 24 pot ATC. ATC carousel motor works great. I haven't been able to get it to the point to be able to test the air cylinder for the tool changer. Also. It may be missing some apparatus that actually grabs the tool on the end of the mechanism. Power draw bar motor works great. Automatic spindle speed motor works great. Spindle motor works great. I removed the front cover to move the Z before I had it under power. And the ball screw and all look new. The ways look perfect. Table is super smooth with no drill damage or other. Knee travels super smooth. And again, ways show no wear. Machine is equipped with a coolant flow system that is in unknown condition. Machine powers on except for ... morescreen. It had a few wires that were chewed by a mouse. Repaired some of the wires and had some of the control lighting up. But still no screen. Machine is under power. All motors can be tested via the contactors. All motors have tested good. NMTB30 tool holders available in another auction. We will include 1 tool holder that is used and came with the machine. It is a collet holder that I think is ER40. This machine very likely just had a minor electrical issue. If someone is familiar with these machines. It could be a quick fix. Alternatively, this is a great candidate for a retrofit to a new control; which is what I will do if it does not sell. Table Working Surface. 12" x 42" Table Load Capacity. 500 LBS. Longitudinal Travel(X-Axis) 24" Cross Travel(Y-Axis) 13.7" Vertical Travel(Z-Axis) 5" Knee Travel(Manual) 15.5" Ram Travel. 14" Maximum Clearance Table Top to Spindle Nose. 19" Maximum Feed Rate. All Axes. 150
|
|
|
2010 Haas VF2SS CNC Side Mount Tool Changer Low Hours
2010 Haas VF-2 Super Speed Call or Email For Video Very Quiet Spindle and Drives Haas VF-2 Super Speed 2010 Specification Description Machine Control, Haas CNC with Coldfire, Table Size, 36" x 14" Machine Travels(X/Y/Z) 30" x 16" x 20" Spindle To Table Distance, 4" 24" Table Capacity, 1.500 Lbs. Spindle Taper, Cat 40, Spindle Speeds, 0- 12.000 RPM, Transmission, Direct In-line Spindle Drive, Rapid Traverse Rate(X/Y/Z) 1.400 IPM, Tool Changer Style, Side-Mount. Twin Arm, Tool Changer Capacity, 24 + 1 Tools, Tool Change Time, 1.6 seconds, Max Tool weight, 12 Lbs. Spindle Drive, 20 HP Vector Drive, Equipped with: Haas Coldfire CNC Control. Brushless 4th Axis Drive and Wiring. 300 PSI Through Spindle Coolant. 24 Station Side Mount Tool Changer. 1400 IPM Rapids. Remote Jog Handle. Programmable Coolant Nozzle. ... moreUSB Port. Chip Auger. Cat-40 Spindle Taper. Coolant System and Tank. Manuals. Rotary Table and Fixtures in Photos NOT INCLUDED* Price $59.900.00 For More Info or to Inspect Please Call Maury Cohn 1 800 888 4312 FADAL.OKUMA,MORI SEIKI,BRIDGEPORT,FANUC,ROTARY,4TH AXIS Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center Haas VF-2SS CNC Vertical Machining Center
|
|
|
Total of 7 HAAS MINI MILL CNC VF VERTICAL MACHINING CENTER 10 PSTIN TOOL CHANGER
1-2004. 5-2005's and 1- 2006 Haas Mini Mill Vertical Machining Center Rigid Tapping. Programmable Coolant All have similar hours and features Very Nice. Only cut Plastic. Servo Time: 16516 Motion Time: 4604 Spindle Time: 4785 Our Stock Number 1393-072814 Machine Description Haas Mini Mill CNC Machining Center Programmable Coolant Year: 2005 Serial# 41657 Specifications: Control. Haas Table Size. 36” X 12” Table Capacity. 500 Lbs. X Axis Travel. 16” Y Axis Travel. 12” Z Axis Travel. 10” Spindle Horsepower. 7.5 HP Spindle Speed. 6.000 RPM Spindle Taper. CT40 ATC. 10 Tools Tool Change Time(Tool/Tool) 3.6 Secs. Rapid Traverse. 600 IPM Max. Cutting Feedrate. 500 IPM Max. Tool Weight. 12 Lbs. Machine Weight: 3.400 Lbs Equipped With: Programmable Coolant High Flow Coolant Pump Kit Work Light 3.5" Floppy Drive Rigid Tapping This machine ... morelooks and runs like new. We can help coordinate shipping. CONDITION: VERY GOOD This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-380
|
|
|
TAKISAWA MAC-V3 CNC MACHINING CENTER W/FANUC & TOOL CHANGER, MILLING MACHINE
NOTE ADDED 6/01/13.E-STOP JUST CAME UP ON MONITOR.NOT SURE HOW TO RESET.NEEDS TO BE RESET BEFORE CAN OPERATE: TAKISAWA MAC-V3 W/FANUC 11M CONTROLS. Bought machine in 2004 and used machine for 3 years on a limited basis. Machined handles for a Murphy Bed manufacturer until the company moved the work in-house. Machine and tool changer performed well. The BT40 toll changer holds 20 tools. I have about 60-80 BT40 tools I will be selling in another auction at a later date.This is a well built Japanese Machine designed for production machining. It is very rigid and weights around 8500#s. It is still wired up in my friends shop and fell free to come in and test run for yourself. I recommed you never buy a machine unless it is under power. I have a complete 3 volume set of maintaince manuals that go with the machine. I anticipate loading to run about ... more$400-500.00 extra. SEARCH EBAY AUCTION.251191643012($13.900)OR.121016657247($18500) FOR COMPARIABLE MACHINES. THEY DONT INCLUDE TOOLING OR MANUALS EITHER. SPECIAL*PRICE REDUCED FROM $8595.BUY IT NOW RECIEVES OVER $1500.00 OF FREE TOOLING AND $300.00 OF MANUALS.LIMITED TIME OFFER. Try the Video of it running on You Tube Below. Its Basically a walk around of the machine. Shot of tool holders that are available(Finisher not included) Control startup and running of a program which we use to machine a handle for a customer. The machining fixture is not included with the machine. The loud noise in the background has nothing to do with this machine. 2/22/2013.I HAVE REDUCED MY PRICE ANOTHER $500.00(ORIGINALLY $8595.00) I NEED TO MOVE THIS MACHINE. MAKE ME A FAIR OFFER AND WE WILL TALK. ITS IN VERY GOOD OPERATING CONDITION AND HAS LOTS OF TOOLING. HUBERT 336-816-5604*6/01/2013.E-STOP JUST CAME UP ON MONITOR WHEN TRYING TO POWER UP. NOT SURE HOW TO RESET BEFORE MACHINE WILL OPERATE AGAIN. PRICE HAS BEEN REDUCED ANOTHER $1000.
|
|
|
Roland MDX-650A CNC mill, Tool Changer, Rotary Axis, Extras -- Ex+, Works Great!
Up for auction is a Roland MDX-650A Modela Pro CNC Mill in great shape. Includes the ZAT-650 4 position automatic tool changer. And the ZCL-650A rotary axis unit. Everything is in excellent cosmetic, physical and functional condition. The spindle has only about 2000 hours from new, with a recommended maintenance interval of 8000 hours. Speeds range from 3000 to 12,000 RPM. The keypad and display are excellent as well, with no wear or holes. The aluminum T-slot table is in excellent condition, with no damage. Cost over $35,000 new. There are several major advantages of this machine for"Subtractive Rapid Prototyping(SRP as Roland calls it) The first is the enormous work envelope. 25 9/16" X x 17 11/16" Y x 6 1/16" Z. This is much larger than a typical prototyping mill. Can cut industrial plastic, modeling polyurethane foam, ... morewood, and aluminum. Having both the tool changer and rotary axis unit make it easy to mill complex models with minimal intervention. Finally, is the very simple to use included software. Open your model in Modela Player 4 to set the tool paths and cutting parameters. Automatically sets cutting parameters for different tools and materials(which can be changed by advanced users) remembers tools in the changer, and automatically uses the rotary unit when attached. Really easy for an engineer or non-professional to use. Or, advanced users can run standard G-code generated by a separate CAM program. Several have suitable post processors for this machine. Includes many extras. Which are often missing from other similar machines. Includes 6 manuals, tool holder alignment jigs, 4 tool holders(also in excellent condition) 6 collets of various sizes, tool changing stand and wrench, automatic tool hight setter, mounting block which mounts next to the tool holder, a couple dozen brand new never used carbide flat and ball end mills from 1/16" to 3/8" 4 T-slot clamps, all software on USB stick, all cables, and finally lots of info gathered from around the web on setup and usage.
|
|
|
Mazak Ultra 650 Horizontal Machining Center with 120 position tool changer
Quantity one available. Mazak Ultra 650 horizontal machining center. 1996 model year. 40" X x 31.5" Y x 31" Z travels. Please see the picture of the workspace diagram. 360 degree Rotary table with pallet changer and dual pallets. Mazatrol M Plus CNC control with remote hand pendant. Cat 50 taper 7000 rpm spindle with 120 position tool changer. Flood coolant and chip conveyor. Full enclosure. Removed from working service. Weight approx 47,000 lbs. 230/ 480 Volt 50/ 60 Hz 3 phase power input required. Inspect on site at our warehouse in Farmington Hills MI. Will ship worldwide. We can help with packing and shipping, please ask. Returns not accepted. This machine is also being advertised locally and we reserve the right to end the auction early. Machine availability subject to prior sale. Please ask if any questions or further ... morespecifications desired. Anthony.248-514-0567.
|
|
|
2012 HAAS VF3 CNC VERTICAL MACHINING CENTER SIDE MOUNT TOOL CHANGER VERY NICE
Haas VF3 2012 Vertical Machining Center 36 Pos Tool Changer Very Nice Our Stock Number 1155-012715 Year: 2012 Machine Description HAAS VF-3 Vertical Machining Center 36 Tool Side mount ATC 710 Cutting Hours Specifications: are accurate to the best of our knowledge) Travels X. Y and Z: 40” x 20” x 25” Spindle nose to table: 4” min/ 29” max Table size: 18” x 48” Max table weight: 3500 lbs. Spindle HP: 30 HP Spindle speed max: 8200 rpm Spindle taper: CT40 ATC– side mounted: 36 Tools Tool–to-tool(Avg. 4.2 Seconds EQUIPPED WITH: 4 TH Axis drive and wiring Programmable coolant nozzle Side Mount 36 POS ATC Chip Auger This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel ... moreService(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty. Batteries are not covered by warranty. If item does not perform to intended description in ad. Charney Machine& Tool. Inc. reserves the right to repair or service item before excepting the return. All shipping costs are paid by the buyer. As per indust
|
|
 |