|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: New Albany, United States Both Machines were purchased new and never used Will sell together or separately Description: 2013 S1 model Full power floor crane. 2.400 lb. Capacity ... more80 ft. Cable. Dry weight: 1500 lbs. Hoist meets ASME B30.5. CE marked for EU markets. Battery Powered Hydraulic Jack Pick& Carry Fits through Doors/Inside Elevators. Use indoors. Outdoors or on roof tops. Pull loads up the side of buildings. Compact for storage and transport. Counter weight tank system(fills with water. Drains) Rear steer wheels/w locks for turning/positioning, Brake on steer wheels, Eliminates need for large crane, Works where forklifts cannot, Can be used to tug or drag materials, Degree finder on side of boom Powdercoated for durability, Adjustable legs to position around obstacles, Increases safety& productivity, Decreases injuries, Certified Check on pick up must be cleared on account before machines can be released
Buy It Now
$150.00 Shipping Condition: New Location: United States JANSEN GTS 1500 E. It has a Pull and ELECTRIC STARTER. The battery is included. The Chipper has a strong and durable 15 hp OHV motor. GTS1500E Wood Chipper ... moreFAQs. Pull Starter AND ELECTRIC START. This machine will make it easy for you to clean up the dead brush and branches.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Pressure sleeve range:.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact and tough, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms or public ... morespaces. Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact, tough and efficient, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms ... moreor public spaces. Compact but Tough: Ourditch digger machine features a small but high-performance Kubota engine for smooth functionality and easy maintenance.
Condition: Used Location: Kent, United States These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Buy It Now
$10.75 Shipping Condition: New Location: Austin, United States Introducing the newest version of the Cat® Communication Adapter 3 Toolkit by Genuine OEM (538-5051). With a model year of 2018, this COMMUNICATION ADAPTER ... moreVERSION 3 is the latest and greatest in its class.
Condition: Used Location: Beaumont, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
$25.00 Shipping Condition: New Location: Tampa, United States CATERPILLAR COMMUNICATION ADAPTER 3 TOOLKIT. Caterpillar Communication Adapter 3 Toolkit is capable of NEWEST VERSION. Record and log performance data. ... more478-0235 (COMMUNICATION ADAPTER 3). NO SOFTWARE APPLICATION INCLUDED, THE CD IS THE WINDOWS DRIVER DISC FOR THE ADAPTER .
Condition: Used Location: Newman, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Condition: Used Location: Longwood, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
Condition: Used Location: Spokane, United States The photographs and any video shown are of the actual item (unless otherwise noted). We take pride in the products and services we provide.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact, tough and efficient, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms ... moreor public spaces. Compact but Tough: Ourditch digger machine features a small but high-performance Kubota engine for smooth functionality and easy maintenance.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact but Tough: Our ditch digger machine features a small but high-performance engine for smooth functionality and easy maintenance. We are always ... morewilling to work out any problems.
Buy It Now
Free Shipping Condition: New Location: Sooterkin Street S.O, India This part may fit various other JCB Models: 1400B, 1550B, 1600B, 1700B, 214, 215, 216, 217, 3C, 3CX, 3D. If no JCB Machine Serial Number is given before ... morepurchasing, we will dispatch this part as advertised with JCB Part Number listed in the title.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States SkidSteer Loaders. Compact but Tough : Ourfront loader machine features a small but high-performance 23hp engine for smooth functionality and easy maintenance. ... moreCompact but powerful, this skid steer can withstand intensive construction projects without sacrificing performance.
Condition: Used Location: Temple, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
Condition: Used Location: Parowan, United States The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Prescott, United States Sunnen AH-222E Horizontal Honing Machine. Condition is Used. Nice machine, great condition. We have a forklift for loading. The machine runs great, the ... morewiring was redone recently (see photo).
Buy It Now
Condition: New Location: Phenix City, United States This Rig Is Equipped With The "Bobcat" Standard Quick Hitch And The Flat Face Hydraulic Drip-Free Connections. Drilling Rig And Accessories Only, Bobcat ... moreNot Included. They Are Fully Hydraulic High Torque Top Head Drive Units With Forward And Reverse Rotation, Fast And Efficient, And Easily Operated, Everything Is Accessible And Convenient.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact, tough and efficient, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms ... moreor public spaces. Compact but Tough: Ourditch digger machine features a small but high-performance Kubota engine for smooth functionality and easy maintenance.
Buy It Now
Condition: Used Location: Parowan, United States 1809.5 Engine hrs. 267187 Miles. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment: 12000LBs for ATV UTV SUV Truck Boat suggest use with Hawse Fairlead Package Include： 1 x Synthetic Winch Line Cable Rope W/o Product Instruction ... moreSpecifications: Material: Ultra-high molecular weight polyethylene Protect sleeve design,Protecting the rope is not be damaged easily Color: Blue Length: 15m(50'). Thickness: 5/16"(8mm),5/16" x 50'.Breaking Strength: Average 12000 lbs Replace your old cableSafe and easy to handle DesignHeavy duty nylon eye guard Hook Attachment Perfect for all your PLOW winching needs Description： Highest after-sales guarantee.
Buy It Now
Condition: Used Location: Carbondale, United States 2007 Komatsu PC50MR-2 mini excavator, EROPS, heat, A/C, Yanmar diesel engine, PRE EMISSIONS, Werk-Brau manual quick coupler, GP bucket w/ teeth, hydraulic ... morethumb, swing boom, rubber tracks, hydraulic front push blade. GOOD RUNNING MACHINE, ONE OWNER UNIT, ALL THE GOOD OPTIONS AND NONE OF THE NONSENSE !
Buy It Now
Condition: Used Location: Watkins, United States The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 1976 Cat 613B Motor Scraper. Capacity is 11 cubic yards. Weighs in at 29395 lbs. Open Operator Station, 23.5-25 Tires No Brake. The remaining ... morebalance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Highland, United States For Sale! SUNNEN MODEL MBC 1803 HONING MACHINE/ OC21) Specifications: MODEL MCB 1801 SERIAL# 81633 I.D. RANGE- 030"3.75" POWER STROKING- 060"6.5" ... moreMANUAL STROKING LENGTH RANGE- 0-10" POWER OR MANUAL STROKE- 0-16" SPINDLE SPEEDS- 20-2500 RPM STROKING RATES- 80-110-160-220-310/SPM SET UP TIME- 10-20 MINUTES SPINDLE MOTOR- 1 HP STROKER MOTOR- 1/2 HP HONING OIL CAPACITY- 25 GAL. DIMENSIONS- 49" x 72" x 67" WEIGHT APPROX. 1.100 LBS. EQUIPPED WITH POWER STROKING AUTOMATIC CYCLE START AUTOMATIC SHUTOFF UNIT IS IN GREAT WORKING CONDITION. Machine can be previewed at our facility in Huntington Beach. CA We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a New RS12 8 Ft high x 10 Ft long x 8 ft. high Grizzly Rock Separator Stationary Kit. This is all in a lift-able palletized container. ... moreReady to be assembled. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Our ditch digger machine features a small yet high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance. Excellent solution ... morefor drilling, ditch-cleaning, trench digging, bull-dozing, grabbing, rock-breaking, and more.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance. ... moreExcellent solution for drilling, ditch-cleaning, trench digging, bull-dozing, grabbing, rock-breaking, and more.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Our front loader machine features a small but high-performance 23hp engine for smooth functionality and easy maintenance. Compact but powerful, this skid ... moresteer can withstand intensive construction projects without sacrificing performance.
Buy It Now
Condition: Used Location: Breckenridge, United States I have a copy of the operational manual for the 40 HZF Model I can send you. The HZF Series Horizontal Trim Scrap Grinder is a high-speed, high-production ... moregrinder designed specifically for processing longer lengths of wood scrap such as rippings, edging, and trim blocks.
Buy It Now
Condition: Used Location: Parowan, United States The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2016 Skyjack SJ3220 Electric Scissor Lift. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2011 GENIE GS-1930 Electric Scissorlift. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Watkins, United States Up for sale is a 1996 Gomaco GT-3600 Concrete Paver. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Two of these are available. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Free Shipping Condition: New Location: North Bergen, United States Compact but Tough: Our ditch digger machine features a small but high-performance engine for smooth functionality and easy maintenance. 1 Ton Trench Digger ... morewith Canopy, Wide Bucket. New Arrivals.
Buy It Now
Condition: Used Location: Accokeek, United States Located in Clinton, MD.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact and tough, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms or public ... morespaces. Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance.
Buy It Now
Condition: Used Location: Watkins, United States Up for sale is a Felco STD1020 Bedding Conveyor. It is a 20 ft long bedding conveyor with a 8x5 ft.Hopper attached. The remaining balance must be paid ... morein the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Watkins, United States Up for sale is a 2005 Reliance Transfer Dump Truck Pup Trailer. Features: Lunette Ring Hitch, Spring Suspension, Air Brakes, 15 ft Body, 11R24.5 Tires. ... moreThe remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Carbondale, United States 2011 Skytrak 8042 telehandler, EROPS (missing door,) heater, Cummins QSB 3.3 turbo diesel engine, NO AFTERTREATMENT, 5100 hours, 42' lift height, 48" ... moreforks, hydraulic tilting mast, manual quick coupler. EXCELLENT MACHINE, FORMER RENTAL UNIT. ALL BOOM HOSES JUST REPLACED WITH NEW, READY TO GO -- EXCELLENT TIRES -- VERY CLEAN APPEARANCE.
Buy It Now
Condition: Used Location: Cedar City, United States The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2014 International ProStar+ 122 6x4 T/A Sleeper Truck Tractor. Owners and Operational Manuals The remaining balance must be paid in the ... moreform of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Mileage 344,381 Miles Cummins 6 Cylinder Diesel Engine, Engine Coolant Heater, 35529 Engine hrs, Allison Automatic Transmission, 425/65R22.5 Front Tires, ... more11R22.5 Rear Tires, Rubber over Walking Beam Suspension, 210 in Wheelbase, PTO.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a UNUSED 2023 SUIHE VG Vibratory (Unused). 5 ft x 4 ft 5 in Double Deck Screen. Electric vibrator and 2 different screen sizes. The remaining ... morebalance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States The TYPHON Terror X2 is a 2. Compact and tough, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing ... moreparks, gardens, farms or public spaces. Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2015 JLG M4069LE Diesel Scissorlift. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States For sale ia a large selection of Gomaco GT3600 curb forms. We a 4 ft sidewalk form, tall curb forms and drive over curb forms. Larger curb forms have ... morevibrators installed. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Watkins, United States Up for sale is a Mancamp 60 ft x 13 ft Skid-Mounted Crew House Trailer. Has 2 bathrooms (Shower, Toilet, Sink) 2 kitchens, 2 beds, Office fully furnished ... morewith stove fridge, washer, dryer etc. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2015 GENIE GS2632 Electric Scissorlift. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Watkins, United States 12,138 Hours. The remaining balance must be paid in the form of cash, or wire transfer of funds.
Buy It Now
Condition: Used Location: Canada As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
Buy It Now
Condition: Used Location: Parowan, United States Up for sale is a 2017 Hyundai HL960 Wheel Loader. Enclosed Cab, Air Ride Seat, Hydraulic Coupler, 118 in Bucket, 23.5-25 Tires. Has a 4.3 Cubic Yard Bucket, ... moreheavy counterweight, 30,230 LB full turn tipping capacity 4-speed.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States The TYPHON Terror X2 is a 2. Compact and tough, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing ... moreparks, gardens, farms or public spaces. Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance.
Buy It Now
Condition: Used Location: Watkins, United States
Buy It Now
Condition: Used Location: Carbondale, United States 2008 Komatsu PC88MR-8 hydraulic midi excavators, EROPS, heat, A/C, radio, manual Q/C, WB hydraulic thumb, GP digging bucket w/ teeth, double auxiliary ... morehydraulic circuit, swing boom, rubber street pads over steel U/C, Komatsu SAA4D95 PRE EMISSIONS diesel engine, 8700 hours. ONE OWNER MACHINE -- GOOD CLEAN RUNNING UNIT HERE FOR CHEAP -- HAS ALL THE OPTIONS & ACCESSORIES -- DON'T MISS IT !
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact, tough and efficient, this trench digger machine is ideal for small construction projects, digging, grabbing, or bull-dozing parks, gardens, farms ... moreor public spaces. Compact but Tough: Ourditch digger machine features a small but high-performance Kubota engine for smooth functionality and easy maintenance.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Compact but Tough: Our ditch digger machine features a small but high-performance Perkins 403j-11 engine for smooth functionality and easy maintenance. ... more• Excellent solution for drilling, ditch-cleaning, trench digging, bull-dozing, grabbing, rock-breaking, and more.
|
|
|
|
Cincinnati CIM-Xchanger Machining Service/Parts Manual
Cincinnati CIM-Xchanger Machining Service/Parts Manual Up for sale is a Cincinnati Milacron original Service Manual and Parts List Catalog for the Cincinnati CIM-Xchanger NC Machining Center with Servo Drive Index Table. Good condition with some dirtiness. All of my items are originals. I do not deal in reproductions. I am happy to ship overseas, but prefer Paypal from international buyer's. Payment is expected within 7 days from end of auction. Paypal is the easiest but feel free to contact me. ~I will combine shipping when possible and usually state combined shipping and handling costs in the description. ~I am very good about shipping within 3 business days after payment is received. ~I will not be responsible for loss or damage during shipping so please buy insurance if you have concerns. ~Once item is received please leave positive ... morefeedback and I will do the same. On Sep-26-08 at 08:18:34 PDT. Seller added the following information:
|
|
|
Cincinnati Milacron 850SX Machining Center Control Programming Manual
Cincinnati Milacron Acramatic 850SX Machining Center Control Programming Manual August 1991 Release 2.2 Publication 7-000-0731PM Manual is in good physical shape
|
|
|
Cincinnati Milacron 10V and 10VC NC Machining Center Parts Manual
Cincinnati Milacron 10V and 10VC 1000/1250/2000 NC Machining Center Parts Manual Publication 2-CM-7746 Manual is in good physical shape
|
|
|
Fundimentals of Band Machining - A Treatise on the Bandsaw - Bandsaw Manual
This"Band Machinining" manual is the most complete and in-depth manual I have ever seen related to the bandsaw. Included are all the fundimentals and not so fundimental. As well as almost 100 pages of blade speed and pitch charts for metal and wood. Copyright 1964 If this book saves one blade. Speeds production or turns out a superior job, it's worth the money. The condition is good. The covers a somewhat soiled.The text is good with a minimum of marks on the inside. For the pro or avid hobbyist- you will not be dissappointed in the completeness of this manual.
|
|
|
Makino Instruction Manual Machining Center MC 86a Fanuc Sysem 11M
This item was bought at auction and has a few signs of wear but is still in really good condition.We also have many more different manuals available. Look at our store or contact us if there is another one that you are looking for. Stock Number: 1118
|
|
|
1938 Starrett Machining Machinist Metalworking Catalog Book Manual EJ Driver NR
Up for auction is a 1938 antique Starrett machinist machining metalworker manual or catalog of products. This is a good catalog of the early Starrett products that a machinist or collector should have. It is stamped on the front and back EJ Driver Hardware-Tools Germantown. PA. The front cover edge is showing some wear and there is some writing on some of the pages. Otherswise good shape for its age. Feel free to message me with any questions. This is a NO RESERVE auction. Thanks and happy bidding!
|
|
|
UNiMAT Miniaure Machining Techniques Operator's Manual
Description This is a company printed instruction and guide book for th Unimat-SL lathe. includes numerous black and white photographs. Contents include: Operating Instructions, Setting up you Unimat, Turning work between centers, Other ways to Mount Work, Special operations, Vertical-spindle machining, Milling Techniques, Using Unimat Accessories, Lath Accessories, Drilling. Milling and Grinding Accessories, WW Watchmaker's' draw bar lathe spindle, Woodworking Accessories, Saddlestiched book with holes to insert into a three ring binder. 8.5 x 11 inches. 43 pages. Some of the pages of the book have some edge wear but most are in good condition. Front cover shows its use. with creases and some of the black has worn of( see Picture)
|
|
|
Cincinnati 10H 10HC Machining/Acramatic Ctr Part Manual
Cincinnati 10H 10HC Machining/Acramatic Ctr Part Manual Up for sale is a Cincinnati Milacron original Parts Manual for the 10H. 10HC-1000/1500/2500 Precision Machining Centers with Cincinnati Milacron Acramatic Controls. Very good clean condition. All of my items are originals. I do not deal in reproductions. I am happy to ship overseas, but prefer Paypal from international buyer's. Payment is expected within 7 days from end of auction. Paypal is the easiest but feel free to contact me. ~I will combine shipping when possible and usually state combined shipping and handling costs in the description. ~I am very good about shipping within 3 business days after payment is received. ~I will not be responsible for loss or damage during shipping so please buy insurance if you have concerns. ~Once item is received please leave positive feedback ... moreand I will do the same. On Sep-26-08 at 08:18:30 PDT. Seller added the following information:
|
|
|
Cincinnati CIM-Xchanger NC Machining Operator Manual
Cincinnati CIM-Xchanger NC Machining Operator Manual Up for auction is a vintage Operator's Instruction Book for Cincinnati CIM-Xchanger NC Machining Center from The Cincinnati Milling Machine Co. 1968. Everything you need to know. Over 100 pages. Very good condition with some dirtiness here and there. Check out my store for more machinist related manuals, brochures and catalogs. Please supersize the photos to see details and content. I generally ship these items via first-class in a manila envelope with a full sheet of corrugated cardboard for protection. All of my items are originals. I do not deal in reproductions. I am happy to ship internationally but I do prefer Paypal payments. Payment is expected within 7 days from end of auction. Paypal is the easiest but feel free to contact me. ~I will combine shipping when possible and usually ... morestate combined shipping and handling costs in the description. ~I am very good about shipping within 3 business days after payment is received. ~I will not be responsible for loss or damage during shipping so please buy insurance if you have concerns. ~Once item is received please leave positive feedback and I will do the same. On Mar-02-08 at 21:48:16 PST. Seller added the following information:
|
|
|
YASNAC MX3 CNC for Machining Centers Instruction Manual TOE-C843-9.30E [PZD]
ITEM DESCRIPTION. Description: YASNAC MX3 CNC System for Machining Centers Instruction Manual Jan. 1993, YASNAC MX3 CNC System for Machining Centers Instruction Manual Jan. 1993 TOE-C843-9.30E. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired ... moredrives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Servi
|
|
|
YASKAWA YASNAC J300M CNC for Machining Programming Manual TOE-C843-13.31B [PZD]
ITEM DESCRIPTION. YASKAWA YASNAC J300M CNC System for Machining Centers Programming Manual Aug. 1996 TOE-C843-13.31B. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. ... moreOur main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items a
|
|
|
GE Fanuc Automation Operator's Manual, GFZ-63014EN/01, Machining Center Model A
Title: GE Fanuc Automation Operator's Manual Description: Our Internal Stock# FC3-6(4/9/13 dan) You are about to purchase the following item: Catalog# GFZ-63014EN/01 Approx 1.000 Pages March 1997 Series 16i/ 18i/ 160i/ 180i- Model A for Machining Center Some Slight Wear and Staining From Normal Use Good Shape Is Being Sold in FAIR to GOOD Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping ... morecost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item.
|
|
|
Makino Operation Manual for Machining Center MPC2
Makino Operation Manual for Machining Center MPC2. MC86, MC65, MC108(Fanuc Series 15M) Inv.23138) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject ... moreto a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13ec68c70e8-0xfb-
|
|
|
LUG ALL CO. COME ALONG MANUAL WINCH LINCOLN PRECISION MACHINING COMPANY 5000 LBS
LINCOLN PRECISION MACHINING COMPANY 5000 LB MANUAL WINCH/ LUG ALL THAT'S IN GREAT WORKING CONDITION. VERY USEFUL TOOL TO HAVE HANDY IN YOUR GARAGE. VEHICLE OR ON YOUR ATV
|
|
|
HAAS VF SERIES VMC (VERTICAL MACHINING CENTER) PROGRAMMING AND OPERATORS MANUAL
HAAS VF SERIES VMC(VERTICAL MACHINING CENTER) PROGRAMMING AND OPERATORS MANUAL. INCLUDES 4TH AND 5TH AXIS CONTROLS. EVERYTHING NEEDED TO UNDERSTAND PROGRAMMING. MAINTENANCE, OPERATION, CONNECTIONS, SET UP, TROUBLESHOOTING, CIRCUIT TESTING, ERROR MESSAGES, SPECIFICATIONS, ETC. INCLUDES WIRING DIAGRAMS AND MECHANICAL ASSEMBLY DIAGRAMS. SOME PAGES LOOSE BUT IT IS ALL THERE. 453 PAGES Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 SHIP ONLY TO AREAS SERVED BY USPO PRIORITY MAIL PAYPAL ONLY PLEASE NO RETURNS ON MANUALS
|
|
|
Makino Maintenance Manual for Machining Center MC 86
Makino Maintenance Manual for Machining Center MC 86(Inv.23145) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to ... morenormal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
Makino Instruction Manual for Machining Center MC 86
Makino Instruction Manual for Machining Center MC 86(Fanuc series 15M) Inv.23139) 23140) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 ... moresurcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
OKUMA Machining Centers Purchased Units MC-H Instruction Manual 3454-E-R2 [PZD]
ITEM DESCRIPTION. Description: OKUMA Machining Centers Purchased Units MC-H Instruction Manual(4th Edition) February 1992, OKUMA Machining Centers Purchased Units MC-H Instruction Manual(4th Edition) February 1992 3454-E-R2 ME21-058-R4 9206-02-100. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced ... moretechnology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and
|
|
|
FANUC SERIES 15-MODEL B FOR MACHINING CENTER PROGRAMMING MANUAL GFZ-62564E/01
FANUC SERIES 15-MODEL B FOR MACHINING CENTER PROGRAMMING MANUAL GFZ-62564E/01 Search FANUC SERIES 15-MODEL B FOR MACHINING CENTER PROGRAMMING MANUAL USED CONDITION GFZ-62564E/01 ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA QZ 291 SW 4 MMH 9/17/12 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and ... moreyou will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within
|
|
|
FANUC SERIES 16... CAP FUNCTION I FOR MACHINING OPERATORS MANUAL GFZ-61874E-1/03
FANUC SERIES 16. CAP FUNCTION I FOR MACHINING OPERATORS MANUAL GFZ-61874E-1/03 Search FANUC SERIES 16/18-MA/16.18,21-MB CAP FUNCTION I FOR MACHINING OPERATORS MANUAL USED CONDITION GFZ-61874E-1/03 SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA QZ 52 SW 4 MMH 9/27/12 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for ... moreany inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item.
|
|
|
Edelstaal Unimat Miniature Machining Handbook and Operations Manual
In excellent condition from 1969. Plus a 5 in 1 Precision Machine. Accessories and Attachments Catalog.
|
|
|
SYSTEM 3R 3R-460, 31-5. EDM Manual Combination Machining Block.
This Buy it Now is for a SYSTEM 3R 3R-460. 31-5. EDM Manual Combination Machining Block. Used. We are not experts on machine tools so we will not be able to answer technical questions. Please refer to the photos and research online before bidding. This item will be sold"AS IS" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f80ce32f7-0x104-
|
|
|
OKUMA electrical manual for MA-40HA machining center with U10M U100M controls
Up for sale is 1 Okuma electrical manual for MA-40HA machining center with U100M or U10M control. It's used. But in the good shape and all the pages are there. You get all what you see on the picture. Please, feel free to call me with any questions you may have(248)705-6712. Thanks. I will not accept returns on this item. I am a professional Okuma service man. I owned and operated my own CNC Service company since 1999 and my reputation is my business. I have lots of Okuma parts in stock at any time. Most parts are new. Some are used. Electrical parts: servo motors, drives, control panels, power supplies, boards, encoders, pulse handles, limit and prox. switches, motor starters etc. Mechanical parts: pulleys, belts, ballscrew/motor shaft couplings etc. If you have any questions about this auction or need any other Okuma parts, please e-mail ... moreme or call(248)705-6712. Please check my other eBay auctions and my store inventory. Thank you.
|
|
|
SYSTEM 3R-460, 24-1 EDM Manual Combination Machining Block
3R-460.24-1 System for your manual Chuck High Percision desine on five ground sides for vertical or horizontal mounting on machine table
|
|
|
DUMORE VERSA-MIL Manual Series 31 & 32 Machining Mill Drill Bore Grind Gear Cutt
PLEASE READ THE ENTIRE DESCRIPTION& TERMS. BY BIDDING YOU ACKNOWLEDGE THAT YOU AGREE TO ALL THE TERMS STATED: From an estate. This 128 page softcover manual is for the Dumore Versa-Mil Series 31 and Series 32. From the Table of Contents page: Section 1 Operation of VERSA-MIL and parts lists Basic Unit Arbors HI-SPEED Cutting Head Universal Head VERSA-SHAPER VERSA-GRINDER Internal Grinder Feed Tables Section 2 Machining Instructions Milling Drilling Boring Thread Milling Gear Cutting Grinding External Internal Surface Tool& Cutter Graduating(Indexing) Layout Shaper Work Index Instructions for Ordering Parts This is a used copy and has wear. A tear on the front cover(taped) smudges, black specks on the cover, turned up page edges. See photos. Payment is expected within 3 days of end of auction. We only ship to Confirmed Addresses. We ... moreusually ship within 1 Business day of receiving(cleared) payment. Insurance and Delivery Confirmation are INCLUDED in the quoted shipping cost. Media Mail is usually the cheapest for books. However, it also takes the longest to arrive(up to 2 weeks) If you need it faster, please let us know before bidding and we can ship it Priority Mail for an additional charge. Most of our Media Mail items are shipped in padded envelopes. Unless they are too big, then they are shipped in a box. NO International Shipping FEEDBACK: We reply to feedback received. Check out our other auctions for more GREAT collectibles! Please read: If you have any questions or special requests concerning packing. Please email BEFORE bidding. Winning bidder pays for all shipping costs and Signature Confirmation for items over $250.00. We are not experts. However we do our best to describe each item. Most of our items come from Estates and as such are vintage, antique, used and are sold"AS-IS" We cannot guarantee an item comes from a smoke-free or pet-free home(we do not smoke, however we do have a dog) Please look at our other auctions. Combine shipping(when possible) and save $$$. Powered by On Ju
|
|
|
Cellular Concepts H-15 CNC VMC Machining Center Manual
Our internal inventory number is 8# MN18-G PLEASE NOTE: OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! Click here To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! OR. CLICK HERE to Email Nu Tek Sales! DESCRIPTION: You are bidding on a Cellular Concepts H15 Series 05 Machining Centers Operators Manual Serial Number: R-05C-011-98 Sections Include: General Handling and Installation of Machine Preparation of machine for Operation Operation Maintenance. Inspection and Adjustment Appended Diagrams Electrical ... moreSchematics Wing Electrical Safety Features. It is(+/ 59 Pages. Seems complete and in generally FAIR used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay $12.00 S&H charge if shipped in the lower 48 states. International shipments or Alaska& Hawaii to pay actual costs + $4.00 Handling! A $2.00 handling charge would also apply to pick up orders. We only accept Paypal or USPS Postal Checks on Payment of under $250.00! For payments over $250.00 we prefer Paypal or other forms of certified funds and company checks(non certified checks held for 10 business days for clearance) Good Luck& Good Bidding! Email Nu Tek Sales! OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us im
|
|
|
11 Hitachi Seiki 500 cnc Horizontal Machining Center Manual Parts nopl INV=10062
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Set of 11 Hitachi Seiki 500 Horizontal Machining Center Manuals. Parts Lists, Books. These are all for Hitachi Seiki 500 Horizontal Machining Center. There are instructions, diagrams, schematics, and more. These are all sold AS-IS. I don't know what is or is not in these books. There may be pages or sections tattered, ripped, or completely missing. NOTHING IS GUARANTEED to be in these books. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. ... moreLocal pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Makino Operation Manual Fanuc System 11M Machining Center MPC2, MC65, MC86 MC108
Operation Manual from the Makino Milling Machine Co. for the Fanuc System Machining Center version MPC2. MC65, MC86, and MC108. We have many other Manuals. If there are any others that you need that we do not have listed yet. Please contact us to see if we have it in our inventory. Stock Number: 1121
|
|
|
Cincinnati Milacron Programming Manual Sabre (ERT) Vertical Machining Centres
Cincinnati Milacron Programming Manual Sabre(ERT) Vertical Machining Centres with Acramatic 850 SX CNC Control Publication Number: 91202117A We have many other Manuals. If there are any others that you need that we do not have listed yet. Please contact us to see if we have it in our inventory. Stock Number: 1151
|
|
|
Kearney Trecker MM-II CNC Machining Center Parts Manual
We Have Thousands Of Machine Manuals. Instruction Manuals. Machinery Maintenance Manuals. Parts list. Service Manuals. Machinery Brochures And Schematics For Sale. We Are Proud To Provide Service To The Metalworking. Chip Making and Fabricating Machine Tool Manual Needs. We Take Great Pride In Getting You The Correct Manual For Your Machine. Let Us know Your Serial Number. And Model Number. We Guarantee That We Will Get You a Correct Manual or Your Money Back! Each Manual Is Comb Bound For Easy Reading On A Flat Surface Such As a Table or Workbench. We Have Collected These Manuals Over Many Years And Continue To Look For More Every Day. Our Customers Have Been Pleased With Our Manuals. Schematics, Parts List, Service Manuals, Maintenance Manuals, Instructions Manuals And Brochures. They Are Filled With Invaluable Information, Sometimes Not ... moreEven Available Direct From The Manufacturer. We Are Often The Last Resort. We Take Pride In This Fact. We Are Here To Fulfill Your Industrial Machinery Manual Needs Today. Email Us Today! Industrial Machinery Manuals Is Proud To Offer 1 Digitally Enhanced Quality Bound Copy Of A: Kearney& Trecker Milwaukee-Matic Model II Machining Center. General Electric or Bendix Control Replacement Parts List Manual(1970 This Manual Covers Models: Milwaukee-Matic II This Manual Includes: General Electric or Bendix Integrated Circuit Control(3 and 4 Axis) Publication No. 291 Parts Lists Visual Indexing and Exploded Views First Edition This Manual Has 113 Printed Pages. Year October 1970-We Ship Domestically via USPS First Class or Priority Mail ABSOLUTELY FREE! Delivery Time Usually 1-5 Days. If You Need a Product Faster. Please View The Shipping Calculator Below For Options. Other Options: UPS Overnight Next Day Air. UPS 2 nd Day Air. We Ship Internationally Only To Canada And Mexico. $8.00 S& H Fee Applies To International Shipping. All other international shipping must be done via Email PDF. I ACCEPT PAYPAL. CASHIERS CHECK, WIRE TRANSFER, OR PERSONAL CHECK. PLEASE DO NOT
|
|
|
Sodick Co, LTD Instruction Machining Manual for EP0C-3W Vol 1 _ 002850705-2SP
Our internal inventory number on this product is LHM5# MN59-X. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Sodick Co. Ltd Instruction Manul- Machining Manual for EP0C-3W, Volume 1, This manual has a Water Stain. Table of Contents: 1. Foreword 2. Specificaitons of Machine 3. Installation. Piping and Wiring of Machine Proper and Electric Supply Tank 4. Name of Each Part ... more5. Dielectric Supply Tank 6. Operating Method 7. Maintenance and Inspection 8. Consumable Parts List Publication Number: 002850705-2SP. Copyright: None Listed Dimensions: 8.5" x 12" x.25" App. Weight: 1 lb. It is(+/ 132 Pages. Seems complete and in generally FAIR used condition! Water Damage* These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Others Domestic Shipments pay $3.00 boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $5.00 boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipme
|
|
|
3 flute finish endmill Lot 65 endmills CNC or Manual Machining work
Description: CTG Finish endmill Lot 65 endmills CNC or Manual Machining work Condition is USED: This is a resharpened item that we did at our shop. This has been sitting around for while so it may not be perfect. Sizes are: 1.5 dia x 1.25 shank x 8.0 flute length x 10.5 overall length Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutter 2 x .250 Lot 109 CNC or Manual Machining work
Description: Keyway Cutter 2 x.250 Lot 109 CNC or Manual Machining work Condition is Resharpened: This has been sitting around for while so it may not be perfect. Sizes are: 2.0 dia x.250 width Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutter 2.250 x .500 Lot 112 CNC or Manual Machining work
Description: Keyway Cutter 2.250 x.250 CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14119f47309-0xff-
|
|
|
Keyway Cutter 2.250 x .250 Lot 111 CNC or Manual Machining work
Description: Keyway Cutter 2.250 x.250 Lot 111 CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutter 1.625 x .625 Lot 114 CNC or Manual Machining work
Description: Keyway Cutter1.625 x.625 CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutter 1.500 x .750 Lot 113 CNC or Manual Machining work
Description: Keyway Cutter1.500 x.750 CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutter 1.250 x .250 x .125 radius Lot 115 CNC or Manual Machining work
Description: Keyway Cutter1.250 x.250 x.125 radius CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Keyway Cutters misc. Lot 154 CNC or Manual Machining work
Description: Keyway Cutters CNC or Manual Machining work This is a misc. lot of used cutters. Some are for chamfering or keyway cutting. Some have radius's on them others dont. Sold as is as shown. Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-141287877e1-0x101-
|
|
|
Keyway Cutter 1/4 x 1/8 Lot 152 CNC or Manual Machining work
Description: Keyway Cutter CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
 |