|
Cincinnati Gilbert CNC Horizontal Boring Mill 4" spindle 4' x 6' Table 48" y-axi
New in 2000. Machine was dissassembled in 2012 inspected. Painted, and reassembled. Currently not under power. Hardened Ways except for the coloum. Turcite and ways are in great shape. 4" spindle 1610 max RPM. 3 Speed W/ Servo Motor. 50 NMTB Taper Power Draw Bar. 200 IPM Rapid Travel. 72" X Axis. 48" Y Axis. 96" W Axis. 29" Z Axis. Table has 1 1/16" T-Slots(6) Table has 3 cross slots 1 1/16" Table has 2 outrigger supports. Teleoscoping Way Covers on Table and Saddle. Central Way Lube System. Hyd. Oil Chiller. AutoCon Dynapath 50 Control. Manual Operation at the Flip of a Switch. Set up to run cnc rotary axis. Machine was taken out of service and replaced with a larger Gilbert in our facility in 2010. Very well maintained machine. Great Machine Overall. Questions are welcome Dan Petry 616 405 3227.
|
|
|
30" x 168" CINCINNATI-MILACRON "HYDROTEL" VERTICAL MILL - #26825
30" x 168" CINCINNATI-MILACRON"HYDROTEL" VERTICAL MILL New 1966. Serial No 65424A233-1, EQUIPPED WITH: 3-Axis Digital Readouts Hand Controls 6" Raised Rear Base 4-Position Turret Depth Stops Power Feed To Vertical Head 25 HP Spindle Motor Large Quantity of Tooling CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 28" x 205" Table Working Surface. W x L. 28" x 191" Table Longitudinal Travel(X-Axis) 168" Cross-Slide Travel. Rated(Y-Axis) 30" Spindle-Head Vertical Travel(Z-Axis) 14" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. Table Longitudinal Feeds. Range. 1 to 12.5 IPM. Cross-Slide Cross Feeds. Range. 1 to 12.5 IPM. Spindle-Head Vertical Feeds. Range. 25 to 3.75 IPM. Power Rapid Spindle-Head Traverse. 20 IPM. Power Rapid Traverse. 25 IPM. Spindle Motor. ... moreHorsepower. 25 HP. Weight. Approximately. 50000 LBS. PRICE: F.O.B. ON WAY IN. $39.500.00. ALL MACHINERY/EQUIPMENT SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13e60c58c76-0xf8-
|
|
|
Cincinnati 750 sabre vmc
For Sale is a Cincinnati 750 sabre vmc 850mc control with fanuc drives. Cat 40. 20 atc tool changer SN: 7029-A01-88-0008. Last we ran prox switch went out on air cylinder for tool changer so we manual tool changed we now have another machine we bought This would be great for a small shop. Machine is used asis. Buyer will need to setup rigging and shipping approx 8080lbs. $500.00 down NON-Refundable balance due 7 days after. If not paid in 7 days I relist unless seller and buyer an agreement otherwise.
|
|
|
Cincinnati Horizontal Production Mill 1-18 (25871)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number:25871. Cincinnati. Horizontal Production Mill MODEL NUMBER: 1-18 SERIAL NUMBER: 31061P5U-23 Year 1968 GENERAL SPECIFICATIONS 10" x 41" Table Size 18" Table Travel 8" Knee Vertical Adjustment 10" Max. Distance Spindle Center to Table Top 2-3/8" Cross Quill Adjustments 50-1500 RPM Spindle Speeds 3/4" 30 In/Min Table Feeds No. 40 Spindle Taper EQUIPPED WITH 3 Hp 220/440/60/3 Motor Magnetic Push Button Controls Dynapoise Overarm 1-Over Arm Support Casting Coolant Pump Shipping Weight: 3000 Lbs. Shipping Dimensions: 47" x 68" x 67" Tall F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS ... moreSUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Hand
|
|
|
Cincinnati Universal, Horizontal, Milling Machine, Toolroom
Up for Auction is this Cincinnati 310-12 universal horizontal milling machine. This machine came from an Oldsmobile Automobile plant and still has the placards!This machine is in good condition with normal wear and tear for its age. The machine is ready to make chips.This machine features hardened box ways. Machine is currently under power and can be tested. Machine is hydraulically shifted for both speeds and feeds. It has a 10 horsepower motor and a 50 Taper Spindle. It is a workhorse and is good for a variety of machining operations! It has a 3 axis accurite digital readout. Arbor support, coolant pump, 230/460 volt(currently wired 230V) side controls, 3 way rapid traverse. Comes with tooling in picture which are 1 ETM drill chuck arbor with Rohm drill chuck(1/32-1/2" 1 Ozak 3/8" holder, 1 ETM 1/2" holder, 1 Bison 1/2" ... moreholder, 1 ETM 3/16" holder, 1 ETM 3/4" holder, 1 ETM 5/8" holder, 1 ETM 7/8" Holder, One 7" facemill with inserts and One 14"long x 1" milling arbor. Known problems are as follows, ways show some wear, there is an oil leak underneath knee and there are some tool marks on the table.The machine is being sold as is with no returns. Machine is also being sold locally so I reserve the right to end the auction early. Texas buyers will have to pay 8.25% sales tax.Buyer is responsible for shipping and rigging. Please be advised that I am not a machinery dealer and do not have shipping quote capability. Contact U-Ship it.com and freightpro.com for shipping quote. I do not have a forklift to lift the machine so if you want me to load it, it will require a forklift rental at your expense. This machine weighs about 9,000lbs and is about 118" deep x 118" wide x 72" tall. I can help with finding you a reasonable forklift rate and can assist with loading should you need it. Payment by Paypal, If you want to pay with cashiers check I will need the check to clear and funds expedited before machine ships. Thank you for considering this auction
|
|
|
CINCINNATI 315-16HP VERTICAL MILLING MACHINE 72"x16" TABLE
CINCINNATI 315-16HP VERTICAL MILLING MACHINE 72"x16" TABLE CINCINNATI 315-16HP VERTICAL MILLING MACHINE 72"x16" TABLE TABLE TRAVEL: 44" CROSS TRAVEL: 15" TABLE HEIGHT ADJUSTMENT: 10" HEAD HEIGHT ADJUSTMENT: 8" SONY DIGITAL READ OUT 16-1.600 RPM FEEDS: 3/8" 90 CHROMED WAYS 110 CONTROL VOLTS 440 VOLTS 3 PHASE 60 HZ 32.32 AMPS OVERALL MEASUREMENTS: 100" x 91" x 102" APPROXIMATE WEIGHT: 15.000 LBS LOADING FEE: $50 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping ... moreCarrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspect
|
|
|
Cincinnati #2ML 3 HP Universal Horizontal Milling Machine Used
For Sale is a 1950's version Cincinnati No 2ML Horizontal Universal Milling Machine. It is in very good condition and tables all move well but are snug with little backlash. It is a 3 HP, 220/ 440 Volt with a NMTB 50 Spindle, 25- 1500 RPM. 52" x 9.5" Table with internal coolant. This Machine is equipped with backlash eliminator on table for climb milling. I am not sure where to find the exact year of manufacture on the machine so if you know and are interested please let me know so I can publish. This Machine is not under power but can be quickly connected for inspection. CIN No2ML Check out my other items! Be sure to add me to your favorites list! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. This ... moreis located in a large manufacturing company with overhead cranes and indoor loading dock. We will palletize for the cost of the skid and can load on a truck arranged by you. At Red Earth Tool we photograph each item so what you see is what you get. Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to all items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that arises prior to leaving feedback. Thank you for your busi
|
|
|
Cincinnati-Milacron"Dual-Power" Dial Type Plain Horizontal Mill Quote# 26837
Quote# 26837. PLAIN HORIZONTAL MILL New 1952. Serial No 3J4P1Z-9, Model 4, Ltr OD. Series"DUAL-POWER" EQUIPPED WITH: Anilam Wizard 2-Axis Digital Readouts 30 HP Spindle Motor Front& Rear Controls Wide Knee Design(2) Arbor Supports- Extra Arbors Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 18" x 80" Table Working Surface. W x L. 18" x 80" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid ... moreTraverse. Vertical. 37.5 IPM. Spindle Motor. Horsepower. 30 HP. Floor Space Required. W x D. 15'3" x 11'10" Overall Height. 6'8" Weight. Approximately. 11000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $6.950.00. All machines/equipment subject to prior sell.
|
|
|
330-18 CINCINNATI-MILACRON "VERCIPOWER" BED-TYPE HORIZONTAL MILL - #26675
Quote#26675#330-18 CINCINNATI-MILACRON"VERCIPOWER" BED-TYPE HORIZONTAL MILL w/VERTICAL-HEAD ATTACHMENT New 1970. S/N 311031H5W-2, Model 320-18, Ltr DK, EQUIPPED WITH: Heavy-Duty Vertical Spindle Head Attachment Front& Rear Controls Power Take-Off on Table Knee Motor CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 18" x 72" Table Working Surface. W x L. 18" x 72" Table Longitudinal Travel(X-Axis) 34" Saddle In-Out Cross Travel(Z-Axis) 12" Knee Vertical Travel(Y-Axis) 22" Spindle Taper. 50 NSTD(24) Main Spindle Speeds. Range. 16 to 1600 RPM Vertical Spindle Speeds. Range. 70 to 2240 RPM(32) Longitudinal and Cross Feeds. 3/8 to 90 IPM(32) Vertical Feeds. Range. 3/16 to 45 IPM Power Rapid Traverse. Long& Cross. 150 IPM Power Rapid Traverse. Vertical. 75 IPM Spindle Motor. Horsepower. ... more30 HP Vertical Spindle Motor. Horsepower. 10 HP Feed Motor. Horsepower. 7.5 HP Electrical System. 220-440/3/60 Floor Space Required. W x D. 11'4" x 10'9" Weight. Approximately. 17000 LBS PRICE: F.O.B. OUR WAREHOUSE. $14.500.00. Machinery/Equipment Subject to Prior Sale. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13fd03720bb-0xec-
|
|
|
Cincinnati Milacron CNC VMC, Sabre 750 Vertical Machining Center w/ chip convey
20" x 36" Cincinnati Milacron Sabre 750 VMC with Acramatic 850 CNC Control. Model-EAA. New in 1991. And only cut Brass Specification Description Control, Acramatic 850, Table Size, 20" x 36" X" Axis, 30" Y" Axis, 20" Z" Axis, 20" Spindle Motor, 15 HP, RPM, 8.000 RPM, ATC, 21 ATC Umbrella Type, Taper, Cat 40, X.Y, Z Feeds Range, 100 to 590 IPM, Approx. Dimension, 8' x 8' x 82"H, Shipping Dimensions, 8' x 11' L x 82" H, Approx. Weight, 9.500 LBS. Equipped With: Acramatic 850 CNC Control. 21-ATC, Manuals, and Jorgensen Chip Conveyor, Sub Plate NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error ... morecan be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions should be above. Please contact Erik for help on getting Freight Rates(Serious Buyers only-Please don’t waste my time) at(847) 338-7139
|
|
|
CINCINNATI-MILACRON "SABRE 750" 4-AXIS CNC VERTICAL MACHINING CENTER - #26556
QUOTE#26556. SABRE 750 CINCINNATI-MILACRON 4-AXIS CNC VERTICAL MACHINING CENTER New 1996. Serial No 7029-A01-96-1279, Model ERO EQUIPPED WITH: Acramatic# CNC Control 8" Chuck 4th Axis Automatic Tool Changer Coolant System- Tooling CATALOGUE SPECIFICATIONS: Table Working Surface. W X L. 20" X 34" Table Load Capacity. 1000 LBS. X-Axis Table Longitudinal Travel. 30" Y-Axis Saddle In/Out Cross Travel. 20" Z-Axis Spindle-Head Vertical Travel. 22" Spindle Taper. V-Flange. 40. Spindle Speeds. Infinite Range. 60 TO 8000 RPM. X& Y-Axis Feeds. Infinite Range. 100 TO 590 IPM. Z-Axis Feeds. Infinite Range. 100 TO 590 IPM. Spindle Motor. Horsepower Rating Floor Space Required. W X D. 7'10" X 8'1" Overall Height. 8'4" Weight. Approximately. 9240 LBS. NOTES: Can Be Seen Under Power. Machine Is ... moreIn Excellent Condition. PRICE: F.O.B. OUR WAREHOUSE. $24.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
42" x 120" CINCINNATI-MILACRON 5-AXIS CNC VERTICAL PROFILER - #26129
QUOTE#26129. 42" x 120" CINCINNATI-MILACRON 5-AXIS CNC VERTICAL PROFILER Retrofit 2008. Serial No 85-413Q672-1, Model 40, EQUIPPED WITH: Allen Bradley Series 9 CNC Control w/CRT Single Spindle A& B Axis 5-Axis Head(Tilt& Swivel) Full 5-Axis Profile& Countour Milling Capability Lubrication System- Coolant System CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 40" x 157" Table Working Surface. W x L. 40" x 143" Table Load Capacity. 25000 LBS. Table Longitudinal Travel(X-Axis) 120" Cross-Slide Travel(Y-Axis) 42" Spindle-Head Vertical Travel(Z-Axis) 14" Spindle Tilt(A-Axis) 20 to +30-DEGREES. Spindle Swivel(B-Axis) 30 to +20-DEGREES. Spindle-Nose to Table. Range. 14" to 32" Spindle Taper. 50 NSTD. Spindle Speeds. Inf. Var. Range. 20 to 3600 RPM. Feed Rates X. Y, Z Axis' ... moreInf Variable. 0 to 140 IPM. Feed Rates A& B Axis' 0 to 240 DEG/MIN. Power Rapid Traverse. 140 IPM. Spindle Motor Horsepower. 20 HP. NOTE: Machine Appears To Be In Very Good Condition As Taken From Service At Government Aerospace Facility. PRICE: F.O.B. OUR WAREHOUSE. $149.500.00. All machines/equipment subject to prior sell.
|
|
|
Milling Machine Universal Cincinnati Model 3U
Cincinnati Model 3U Universal Milling Machine Specifications Table Size: 53" x 12.25" Cross table travel: 32" Saddle travel: 10" Feeds(24) 24 5/16 to 60 IPM, Speeds.21) S18- 1300 RPM, Spindle Taper: 50, Equipped with: Motorized Overarm. Arbor Support, Arbor, Pendant Control, Universal Swiveling Table, Lube System, Coolant Pump and Piping, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
Cincinnati Arrow 2 1250 G VMC Acramatic 2100
ARROW 1250. Machining Centers Vertical, 3 Axis This machine was a good running machine when it was removed from production.We shipped the machine to our location and an Axis drive went bad.We ordered a new Axis drive installed it and we received the Alarm posted on the picture. So we give up.If there is a company that has good Cincinnati Technicain this would be a great buy. Questions Call Steve@ 866-803-5202 Brand: Cincinnati Model: ARROW 1250 Acramatic 2100 Year: 1999 MACHINING CENTERS VERTICAL- X: 50" Y: 20" Z: 22" Power: 15 HP- RPM: 8.000- ATC: 21- Taper: Cat 40- Table-W: 53.9" Table-L: 23.6"
|
|
|
NICE!! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE
aims NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cincinnati Milling Machine Company. This is a Toolmaster Variable Speed Vertical Milling Machine in working condition. Model# Toolmaster Serial# 6J4V5T-132 Features: NMTB 40 Spindle. Variable Speed. Bijur Lubrication System. X-Axis Power Feed. Heavy Duty Box Ways. Specifications: Table: Overall Size: 42" x 10" T-Slots: 3@ 2-1/4" centers T-Slot Size: 5/8" Travels: Table Travel(X-Axis) 22" Saddle Travel(Y-Axis) 10" Knee Travel(Z-Axis) 14" Quill Travel: 5" Ram Travel: 17" Spindle: Spindle Diameter: 3" Quill Diameter: 3-3/4" Taper: NMTB40 Spindle Speeds: 85 to 535 rpm(low) 615 ... moreto 3.800 rpm(high) Quill Feed: 0.0015/ 0.003/ 0.006 in.rev. Head Adjustments: Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 2 Horsepower. 230/460 Volt, 1,710 rpm, 5.8/2.9 Amp, 60 Hz, Three Phase Electrical: 230/460 Volt. Three Phase Overall Dimensions: 61" x 60" x 81" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOO
|
|
|
FNC 4 Controller Mother board - Cincinnati Arrow 750
FNC 4 Controller Motherboard- Cincinnati Arrow 750 Manufacture refurbished. Works and Operates Well.
|
|
|
FNC 4 Controller Drives - Cincinnati Arrow 750
Control Techniques MAXAX100, 12 month Warranty, Fully functionally tested. Cleaned and factory reset Professionally refurbished, Refurbished items may feature minor cosmetic blemishes and are not supplied with original packaging or accessories.
|
|
|
Cincinnati Milacron CNC Mill Vertical Machining Center
Working Condition. Running condition. Will help load. S/N 7042C00950373. 20 1/2 x 27 1/2 Table. 21 tool changer. 9000 lbs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14114a39cac-0xf4-
|
|
|
Cincinnati Arrow 1000 Cincinna VERTICAL MACHINING CENTER 40" x 20" x 22" Travels
Cincinnati Arrow 1000 Vertical Machining Center Conversational Programming.Windows Based Control Our Stock Number 1333-080713 Machine Description Cincinnati Arrow 1000 Year: 1998 Specifications: are accurate to the best of our knowledge) Table Size: 44" x 22" X-Axis Travel: 40" Y-Axis Travel: 20" Z-Axis Travel: 22" Spindle Speeds: 60-6000 RPM Spindle Taper: CAT-40 Tool Changer: 21 ATC Equipped With Acramatic 2100 CNC Control 15HP Spindle Motor(21) Position Automatic Tool Changer Full Enclosure Dimensions and Weight 120"x 95"x 96" 10.000 lbs This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations ... morewithin the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is not made within 10 days of the auction end. Wire transfer is preferred. Warranty and Terms 14 Day Return Warranty. Batteries are not covered by warranty. If item does not perform to intended description in ad. Charney Machine& Tool. Inc. reserves the right to repair or service item before excepting the return. All shipping costs are paid by the buyer. As per industry standard. Customers are respo
|
|
|
Seimens Cincinnati Milacron Arrow 500 ERO CNC VMC ~1999 cat-40 tool holder
Auction is for one tool holder with-out retention knob(retention knob is not included) and with-out the Collet(collet is NOT included. The cat-40 tools is seller's choice; The picture is not of the actual tool. But a reference picture. I reservetheright toend this auctionshould the cncmachinethese cat-40 tools fit into is sold earlier than expected. Good chance to get a cat-40 tool holder for very little money. The tool in question is from a very nice and working ~1998 used Cincinatti Milacron Arrow 500 ERO which is 3-axis VMC with a new LCD upgraded video screen and automatic spindle oiler. Network card attached; Thus. Gcode can be copied to the machine directly, or via floppy or rs-232 cable. Nice upgraded VMC CNC Mill milling machine in Temecula area for immediate inspection and pick-up. Machine is under power and can be observed working. ... moreComes with power distribution and cut-off switch. Cincinatti Milacron Arrow 500 with paper full manual set and digital app notes. Etc. LCD Screen Kurt Vice Angle Vice other upgrades and 20+ tool holders including er-32 and cat-40 dill holders and large variety of common cat-40 holders Coolant tank upgrades Automatic Spindle Oiler Coolant and air to operator. Network-connected and floppy and RS-232 Exceptional condition works great Installed and under power 22.500.00 OBO will consider reasonable. Willing to split out tools holders, etc. High-end air compressor is also available for five hundred which includes hose. Near Winchester Road and I-15 near Temecula I-15/I-215 On I-15 30 miles south of Corona; About 35 miles north of Escondido in San Diego County. 951 Telephone530 number 9585 or call cell direct at(909) telephone 529 number 2559} I am happy to answer any questions regarding this tool holder. Located in California. PST; Inspection is highly recommended. 951 Telephone530 number 9585 or call cell direct at(909) telephone 529 number 2559 Or send ebay message
|
|
|
CINCINNATI-MILACRON "DIAL-TYPE" VERTICAL MILL MDL# 315-15 QUOTE # 26977
QUOTE# 26977. 315-15 CINCINNATI-MILACRON"DIAL-TYPE" VERTICAL MILL Serial No 4A3V5K-6. Model 315-15, Ltr LL, Series"DIAL TYPE" EQUIPPED WITH: Knee Motor Power Down-Feed to Head Vertical Turret Stops(4-Position) w/Starret Gauging CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 15.25" x 68.5" Table Working Surface. W x L. 15.25" x 68.5" Table Longitudinal Travel(X-Axis) 34" Saddle Cross Travel(Y-Axis) 16" Knee Vertical Travel(Z-Axis) 16" Spindle-Head Vertical Travel(Z-Axis) 6" Spindle-Center to Column. 18" Spindle-Nose to Table. Minimum. 0" Spindle-Nose to Table. Maximum. 22.125" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Head Feeds. Range. 3/16 to 45 IPM. 32) Vertical Knee ... moreFeeds. Range. 3/16 to 45 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 75 IPM. Spindle Motor. Horsepower. 15 HP. Feed Motor. Horsepower. 3 HP. Floor Space Required. W x D. 11'6" x 10' Weight. Approximately. 11500 LBS. PRICE: F.O.B. OUR WAREHOUSE. $8.950.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
330-18 CINCINNATI-MILACRON "VERCIPOWER" "DH" VERTICAL MILL - #26938
QUOTE# 26938. 320-18 CINCINNATI-MILACRON"VERCIPOWER" VERTICAL MILL Serial No 9J31V5Z-0001. Model 330-18, Ltr DH, Series"VERCIPOWER" EQUIPPED WITH: Newall 3-Axis Digital Readouts Power Draw Bar- One Shot Lubrication 20 Horsepower Spindle Drive Coolant System(Built-In) Kurt Vise(Model D100. S/N 000835) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 18" x 72" Table Working Surface. W x L. 18" x 72" Table Longitudinal Travel(X-Axis) 34" Saddle Cross Travel(Y-Axis) 16" Spindle-Head Vertical Travel(Z-Axis) 24" 2"26" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 375 to 90 IPM. 32) Vertical Head Feeds. Range. 190 to 45 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 75 IPM. Spindle ... moreMotor. Horsepower. 20 HP. Feed Motor. Horsepower/RPM. 5 HP. Overall Dimensions. W x D. 13'11" x 12'3" Weight. Approximately. 21380 LBS. PRICE: F.O.B. OUR WAREHOUSE. $19.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL. A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-142066acc7f-0x100-
|
|
|
CINCINNATI-MILACRON"DUAL-TYPE" PLAIN HORIZONTAL MILL MDL 420-16 QUOTE #26914
QUOTE#26914. 420-16 CINCINNATI-MILACRON"DIAL-TYPE" PLAIN HORIZONTAL MILL Serial No 4A4P5S-3. Model 420-16, Ltr LL, Series"DIAL-TYPE" EQUIPPED WITH: Front and Rear Controls Motor On Knee Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 16.25" x 79.25" Table Working Surface. W x L. 16.25" x 79.25" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Knee Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 37.5 IPM. Spindle ... moreMotor. Horsepower. 20 HP. Feed Motor. Horsepower. 5 HP. Floor Space Required. W x D. 9'8" x 11'10" Weight. Approximately. 10300 LBS. PRICE: F.O.B. OUR WAREHOUSE. $7.950.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
CINCINNATI TOOLMASTER 48" x 12" VARIABLE SPEED VERTICAL MILLING MACHINE
aims CINCINNATI TOOLMASTER 48" x 12" VARIABLE SPEED VERTICAL MILLING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cincinnati Milling Machine Company. This is a Toolmaster Variable Speed Vertical Milling Machine. Includes 3 Cincinnati collets but not the vise on the table. Item will ship or can be picked up from location in Hayward. CA and not at our Irwindale, CA facility. Mill weighs approximately 3,000 lbs. There is a $200 Fee for Loading onto truck. If you would like to make shipping arrangements please contact a machinery mover directly for quote. Please inspect. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please ... morecheck out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CINCINNATI TOOLMASTER 48" x 12" VARIABLE SPEED VERTICAL MILLING MACHINE CINCINNATI TOOLMASTER 48" x 12" VARIABLE SPEED VERTICAL MILLING MACHINE Reliable Tool Inc. c 2011 | Powered by
|
|
|
Hitachi Seiki same as Cincinnati Vertical Mill
This is a nice vertical mill I bought it used 17 years ago. We are all CNC machines now and never use this machine anymore. I can send more pictures or make a video if you need. Or you can come see it run. The vise and cutter are not part of the sale. All feed work it has coolant on the machine I have the operators manual. Looks like the machine was made around 1966. It is a 50 taper machine. Book says she weighs 10.800 LBS It has hooks cast into the base for lifting. Pick up only. Rigging available
|
|
|
Cincinnati Milacron Arrow 500 CNC VMC, 1997, see "VIDEO"
1997 CINCINNATI MILACRON ARROW 500 VIDEO MACHINE SPECS: TABLE SIZE. 27.5"x 20.5" CROSS TRAVEL(X) 20" LONGITUDINAL TRAVEL(Y) 20" VERTICAL TRAVEL(Z) 20" SPINDLE SPEEDS. 8000 RPM MAX SPINDLE DRIVE. 10 HP SPINDLE TAPER. 40 CONTROL TYPE. ACRAMATIC EQUIPPED WITH: ACRAMATIC CNC CONTROL W/ COLOR CRT(P.C. BASED) HAND HELD PENDENT RIGID TAPPING 21 STATION AUTOMATIC TOOL CHANGER FULL COOLANT ENCLOSURE SPINDLE LOAD METER COOLANT SYSTEM SPECIAL FEATURES: NEW CONTROL SCREEN NEW POWER SUPPLY CONTROLLER COMES WITH ASSORTED TOOL HOLDERS TRANSFORMER INCLUDED Special note: This machine does not come with the Haas 4th axis unit shown in photo. CONTACT ROBBY@ 714-892-9800
|
|
|
Cincinnati Milacron Arrow 750 CNC Machining Center
Good working condition 2100 control with online Gibbs Posted with
|
|
|
Cincinnati 100 Hypowermatic Horizontal Production Mill Milling Machine
This mill taken from service one month ago in good operating condition! Email us for more pics/ info! OR. You are bidding on a Cincinnati 100 Hypowermatic Hor Production Mill! Good condition. Removed from service! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges of $300.00. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
420-16 CINCINNATI-MILACRON "DIAL TYPE" "LL" PLAIN HORIZONTAL MILL - #26914
QUOTE# 26914. 420-16 CINCINNATI-MILACRON"DIAL-TYPE" PLAIN HORIZONTAL MILL Serial No 4A4P5S-3. Model 420-16, Ltr LL, Series"DIAL-TYPE" EQUIPPED WITH: Front and Rear Controls Motor On Knee Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 16.25" x 79.25" Table Working Surface. W x L. 16.25" x 79.25" Table Longitudinal Travel(X-Axis) 42" Saddle In-Out Cross Travel(Z-Axis) 14" Knee Vertical Travel(Y-Axis) 20" Spindle-Center to Table-Top. Minimum. 0" Spindle-Center to Table-Top. Maximum. 20" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 16 to 1600 RPM. 32) Longitudinal and Cross Feeds. 3/8 to 90 IPM. 32) Vertical Knee Feeds. Range. 3/32 to 22.5 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 37.5 IPM. Spindle ... moreMotor. Horsepower. 20 HP. Feed Motor. Horsepower. 5 HP. Floor Space Required. W x D. 9'8" x 11'10" Weight. Approximately. 10300 LBS. PRICE: F.O.B. OUR WAREHOUSE. $7.950.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144c5e62dfa-0x109-
|
|
|
Cincinnati Horizontal Mill For Sale-$25,000
Cincinnati Horizontal Mill for sale with pallet changer and pallets
|
|
|
Cincinnati Arrow 1250-C CNC Vertical Machining Center 50x20 Mill Acramatic CT
2000 Cincinnati Arrow 1250 CNC Vertical Machining Center 50x20x22 Specifications: Control. Acramatic 2100 PC Based Control Table Size. 53.92" x 23.6" X" Axis Travel. 50" Y" Axis Travel. 20" Z" Axis Travel. 22" Spindle Speed. 8.000 RPM Spindle Motor. 15 HP Spindle Taper. CAT40 Tool Stations.21 ATC Carousel Machine Weight. 10.000 Lbs Equipped With: Acramatic 2100 PC Based Control Remote Jog Handle Chip Conveyor Video: http:www.youtube.com/watch?v=FKL94GKkOTo&feature=youtube_gdata Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. ... morePlease verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra cos
|
|
|
Cincinnati Arrow 2000 CNC Vertical Machining Center 2001
Table Size 30" x 90" Max. Weight on Table 5500 lbs. Travels X-Axis 80" Y-Axis 30" Z-Axis 30.31" Spindle Speeds 60- 10.000 RPM Spindle Motor 12 HP Spindle Taper#40. Tool Changer 21 ATC x 2 Tool Selection Random. Auto Tool Change Time 7 Sec. Feed Rates(X.Y,Z) 0.1- 590 IPM. Rapid Rates(X.Y,Z) 945 IPM Approx. Dimensions 213" x 150" x 142"H. Approx. Weight 25.000 Lbs. Equipped With: Fanuc 18iM Control. 2) Chip Conveyor’s Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees ... moreregarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
|
|
|
Cincinnati Milacron Sabre 1250 Vertical Milling Machine
This Cincinnati Milacron Sabre 1250 CNC vertical milling machine is just retrofitted with brand new MS-Tech CNC control. It is under power for inspection and ready to go for work immediately. A video can be seen at- Brand new MS-Tech CNC control; Fanuc G-code compatible. Installed two new servo motors for X and Y axes. Installed two pairs of new thrust bearings on X axis leadscrew. Comes with chip conveyor. Newly painted. The machine is in a good condition. And spindle makes no extra noise. The CNC control comes with one year limited warranty. The machine has no automatic tool changer(ATC) and it was removed by its previous owner. Great buy for die making or machining job with no frequent tool change need. For questions, please call 1-800-349-6224. Machine Features: Brand new CNC control Two new motors New bearings on X-axis leadsrew Coolant ... moresystem Splash Guard Machine Specifiction: X-axis travel 50" Y-axis travel 25.9" Z-axis travel 25.9" Table Width 53.9" Table Length 26" Spindle Taper CAT40 Power 15HP RPM 8000RPM Dimensions 143" x 132" x 125" Machine Weight 20000 Lb Buyer is responsible for the cost of shipping 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-145db79625b-0x111-
|
|
|
CINCINNATI MILACRON 650-20 MILLING MACHINE
CINCINNATI MILACRON 650-20 MILLING THE MACHINE IN GOOD WORKING CONDITION.460 VOLT 650 RPM VERTICAL HEAD 325 P.S.I TOTAL MACHINE WEIGHT 29000 LB FOR MORE INFO PLEASE CALL US 904-996-8888 EQUIPMENT TRADING LLC 6141 ARLINGTON EXPRESS WAY JACKSONVILLE FL 32211
|
|
|
Cincinnati No. 3 Universal Horizonal Milling Machine
Good. Used Cincinnati horizontal milling machine. 220 3 PH power. For more information, call 706-278-8130 and ask for Gordon.
|
|
|
CINCINNATI MILACRON ARROW 750 CNC VERTICAL MACHINING CENTER
CINCINNATI MILACRON ARROW 750 CNC VERTICAL MACHINING CENTER Serial No. 7043-C00-94-0022 New 1994 Equipped With Arrow CT-FNC CNC Control(M-Code& G-Code) Rigid Tapping Coolant Tank and Pump Assorted Misc. 40 Taper Tool Holders. Approx. 3) Specifications Table Size 36" x 20" Table Load Capacity 1000 Lbs Travels Longitudinal(X-Axis) 30" Cross(Y-Axis) 20" Vertical(Z-Axis) 20" Range- Spindle Line To Work Surface 5" 25" Spindle Taper 40 Spindle Range 60-6.000 RPM No. Tool Stations 21 Automatic Tool Change Time 9 Sec(Metal To Metal) Tool Selection, Random Rapid Feed Rate 472 IPM Cutting Feed Rate 0.118- 472 IPM Motor 7.5 HP Electrics, 3 Phase. 60 Cycle, AC Voltage, Approx. Dimensions 110" x 90" x 98"H Approx. Weight 7.300 Lbs, This machine is being sold as-is. There are no warranties or guarantees ... moreeither expressed or implied. Loading Charge: $200.00(We will load the machine onto your flat bed truck. We recommend air-ride and full tarps) On Jun-12-14 at 08:20:18 PDT. Seller added the following information: See this machine under power VIDEO LINK https:www.youtube.com/watch?v=V4UdSawK-40
|
|
|
Cincinnati Milacron T-35 5-Axis CNC Horizontal Machining Center HMC LOW HOURS!!!
We recently purchased this machine for a contract that has since been cancelled. We no longer need the machine. It ONLY HAS 10.000 spindle hours and was a one shift machine. Spindle and taper are excellent. No rust, ways look perfect, screws are nice, it will make someone a great machine for the money. We are NOT a machine tool dealer. We are a machine shop that owns this machine. NOTE: This is an AC servo machine from the factory and 4x faster than the older DC models. Machine is listed locally and may be removed for local sale. New replacement cost is approx $2M. Shipping is extra. These machines typically sell for about $160K-$200K. We have discounted the machine for quick sale. Cincinnati Milacron T-35 1994 year model One owner machine. Government The Spindle is 20 to 4000 rpm 3 speed gear box chip conveyor Simultanious 5 axis motion ... morecontrol Torque Controlled Machining Tool Length Measuring Probe Renishaw spindle mounted surface sensing probe Through Spindle Coolant Linear scales in X/Y/Z Storage for 130 tools- 50 Taper. Dual chains 460 Volt 3ph 60 cycle electrics 2 pallet work changer with rail work station turn table In cycle. Power on, Spindle Run Time Meters 75.000 feet of Tape Program Storage(9 MEGs) Travels X/Y/Z 60/60/62" Acramatic 950. Color CRT with touch screen AC servos in all axis and spindle BCL direct binary code exchange feature(no post processor required) IF YOU ARE INTERESTED IN THIS MACHINE. PLEASE CONTACT US FOR MORE INFORMATION
|
|
|
Cincinnati Sabre 500 CNC Vertical Machining Center Acramatic 850 SX Control
CINCINNATI SABRE 500 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 1992 TABLE SIZE 25.6 X 20" MAX. TABLE LOAD(EVENLY DISTRIB. 770 LBS SPINDLE NOSE TO TABLE TOP 27- 5" X AXIS TRAVEL 20" Y AXIS TRAVEL 20" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE X.Y/Z 787/708 IPM CUTTING FEED RATE ALL AXES 0.1- 344 IPM SPINDLE SPEEDS 0- 6000 RPM SPINDLE TAPER CAT 40 SPINDLE MOTOR(PEAK RATING) 15 HP PEAK TOOL CHANGER CAPACITY 21 STATIONS MAX. TOOL WEIGHT 15 LBS APPROX. DIMENSIONS 97 X 97 X 99" APPROX. WEIGHT 9.300 LBS EQUIPPED WITH: ACRAMATIC 850 SX CNC CONTROL WITH 10" CRT RS-232C PORT INTERFACE FOR DNC OPERATION TROYKE NC-10-B 4TH AXIS ROTARY TABLE MANAUL PULSE GENERATOR(HAND WHEEL) STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUALS*NO TOO LING OR VISES INCLUDED* ... moreON OUR WAREHOUSE FLOOR. WE ARE LOCATED JUST OFF I-94 IN KENOSHA. WI. A HALF HOUR SOUTH OF MILWAUKEE& AN HOUR OR SO NORTH OF CHICAGO. YOU ARE WELCOME TO SEE THIS MACHINE UNDER POWER ON OUR FLOOR. Purchase Conditions-Y ou are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. AS THIS MACHINE IS LISTED ON SEVERAL OTHER SITE. IT IS SUBJECT TO PRIOR SALE PAYMENT IN FULL BY US BANK WIRE PRIOR TO SHIPPING. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. BUYER PAYS FOR RIGGING AND SHIPPING TO END DESTINATION. SEE OUR EBAY STORE FOR MORE CNC MACHINES. TOOLING, CHUCKS, MANUALS AND OTHER METAL WORKING EQUIPMENT. THANKS FOR LOOKING! If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions
|
|
|
Cincinnati Arrow 1000 CNC Vertical Machining Center Vickers 2100 CNC Control
CINCINNATI ARROW 1000 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 1998 TABLE SIZE 44" x 20" MAX. TABLE LOAD(EVENLY DISTRIB. 1.540 LBS SPINDLE NOSE TO TABLE TOP 5" 27" X AXIS TRAVEL 40" Y AXIS TRAVEL 20" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE ALL AXES 787 IPM CUTTING FEED RATE ALL AXES 0.1- 472 IPM SPINDLE SPEEDS 60- 8.000 RPM SPINDLE TAPER CAT 40 SPINDLE MOTOR(PEAK RATING) 15 HP TOOL CHANGER CAPACITY 21 STATIONS MAX. TOOL WEIGHT 15 LBS FLOOR SPACE(PER SPECIFICATION) 137 x 118" x 108" APPROX. WEIGHT 10.000 LBS EQUIPPED WITH: VICKERS 2100 PC-BASED CNC CONTROL WITH 14" CRT RS-232C PORT INTERFACE& 3.5" FLOPPY DISK DRIVE RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) TOOL LENGHT PROBING& PART PROBING SYSTEMS FULL FEATURED HAND HELD PENDANT CONTROL STANDARD ... moreCOOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUALS*NO TOO LING OR VISES INCLUDED* ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WISCONSIN. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. Purchase Conditions-Y ou are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. AS THIS MACHINE IS LISTED ON SEVERAL OTHER SITE. IT IS SUBJECT TO PRIOR SALE PAYMENT IN FULL BY US BANK WIRE PRIOR TO SHIPPING. BUYER PAYS FOR RIGGING AND SHIPPING TO END DESTINATION. SEE OUR EBAY STORE FOR MORE CNC MACHINES. TOOLING, CHUCKS, MANUALS AND OTHER METAL WORKING EQUIPMENT. THANKS FOR LOOKING! If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com an
|
|
|
Cincinnati Sabre 750 CNC Vertical Machining Center Vickers 2100 CNC Control
CINCINNATI SABRE 750 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 1996 TABLE SIZE 34" x 20" MAX. TABLE LOAD(EVENLY DISTRIB. 1.000 LBS SPINDLE NOSE TO TABLE TOP 5" 27" X AXIS TRAVEL 30" Y AXIS TRAVEL 20" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE ALL AXES 945 IPM CUTTING FEED RATE ALL AXES 0.1- 590 IPM SPINDLE SPEEDS 0- 8.000 RPM SPINDLE TAPER CAT 40 SPINDLE MOTOR(PEAK RATING) 15 HP PEAK TOOL CHANGER CAPACITY 21 STATIONS MAX. TOOL WEIGHT 15 LBS APPROX. DIMENSIONS 110" x 82" x 110" APPROX. WEIGHT 9.300 LBS EQUIPPED WITH: VICKERS 2100 PC-BASED CNC CONTROL WITH 14" CRT RS-232C PORT INTERFACE& 3.5" FLOPPY DISK DRIVE FULL FEATURED PENDANT CONTROL WITH E-STOP STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUALS*NO TOO LING ... moreOR VISES INCLUDED* ON OUR WAREHOUSE FLOOR. WE ARE LOCATED JUST OFF I-94 IN KENOSHA. WI. A HALF HOUR SOUTH OF MILWAUKEE& AN HOUR OR SO NORTH OF CHICAGO. YOU ARE WELCOME TO SEE THIS MACHINE UNDER POWER ON OUR FLOOR. Purchase Conditions-Y ou are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. AS THIS MACHINE IS LISTED ON SEVERAL OTHER SITE. IT IS SUBJECT TO PRIOR SALE PAYMENT IN FULL BY US BANK WIRE PRIOR TO SHIPPING. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. BUYER PAYS FOR RIGGING AND SHIPPING TO END DESTINATION. SEE OUR EBAY STORE FOR MORE CNC MACHINES. TOOLING, CHUCKS, MANUALS AND OTHER METAL WORKING EQUIPMENT. THANKS FOR LOOKING! If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can ema
|
|
|
Cincinnati Sabre 500 CNC Vertical Machining Center 10,000 RPM Spindle CT 40 1996
1996 Cincinnati Sabre 500 CNC Vertical Machining Center Specifications: Control. Siemens 2100 Table Size. 25.6" x 20" Max Table Load. 770 LBS X-Axis Travel. 20" Y-Axis Travel. 20" Z-Axis Travel. 22" Spindle Taper. CAT 40 Spindle Speed. 10.000 RPM Spindle Motor. 15 HP Rapid Traverse Rates(XY/Z) 787/708 IPM Tool Changer. 21 Positions Machine Weight. 8.900 lbs Machine Dimensions. 102" x 100" x 108" Equipped With: Siemens 2100 Control Die and Mold Package 10.000 RPM Spindle Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from
|
|
|
CINCINNATI V-CNC-500 MACHINING CENTER W/ 4th AXIS (VIDEO)
HERE IS A VERY NICE 2005 CINCINNATI CNC WITH ONLY 3800 CUTTING HOURS INCLUDES A 4TH AXIS ROTARY TABLE. TRAVEL IS 20"X20" FOOT PRINT APPROX. 95"X88"X100" ANY QUESTIONS CALL BILL 317 638-4100 EMAIL: MACHINERYMARTINC@AOL.COM FOB INDIANAPOLIS, IN 46241 VIDEO LINK FOR CINCINNATI V-CNC-500 MILL
|
|
|
Cincinnati Milacron Arrow 500 VMC with New Control
This Cincinnati Milacron Arrow 500 CNC vertical Machining Center is just retrofitted with brand new MS-Tech CNC control. It is under power for inspection and ready to go for work immediately. A video can be seen at https:www.youtube.com/watch?v=g3-2wDL1Bog&feature=youtu.be- Brand new MS-Tech CNC control; Fanuc G-code compatible. Installed new over-sized servo motor& drive on Z axis for increased performance. The machine runs quietly. Tool changer works reliably. The machine is in a good condition. The CNC control comes with one year limited warranty. For questions. Please call 1-800-349-6224. Machine Features: Brand new CNC control New motor& drive on Z-axis Coolant system Splash Guard Machine Specifiction: X-axis travel 20" Y-axis travel 20" Z-axis travel 25" Table Width 30" Table Length 26" Spindle Taper ... moreCAT40 Power 10HP RPM 60- 6000RPM Tool Changer 21 ATC Machine Weight 8000 Lb Buyer is responsible for the cost of shipping
|
|
|
Cincinnati Retrofitted CNC Vertical Mill Milling Macihne, not Bridgeport
I have a 20 inch by 40 inch vertical Cincinnati Cintimatic milling machine that was retrofitted with an Ah-Ha stepper motor control about 15 years ago. New heavy duty stepper motors were added at the same time. The machine served me very well and was running with no problems when taken out of service about 10 years ago. It has a manual tool changer. If I can find them. All of my tooling is included in the price. Probably a dozen pieces IF I CAN FIND THEM. Also the machine had a new spindle motor when rebuilt with a new speed control. It can be run on 220V single phase. This is very handy. For a number of reasons this machine is not under power and can NOT be seen prior to purchase. It is in locked dry storage near Pine Bush. NY and I don't live in that area at this time. This is a great deal. It is a very heavy, rigid machine with a large ... morex-y travel. You just don't find machinery like this. You can load the whole top surface with parts to machine and walk away. Or CNC machine some large pieces. all three axis x,y,z are CNC controlled. If you look closely at the photos you will see the large ball slide x-y ways on this machine. It is very well made. Also the z axis has a manual option if I remember correctly. The machine is sold as is where is with NO WARRANTY. You must pay in full prior to picking up the machine. ALSO you must hire an experienced rigger with a STEEL DECK rollback truck. Please do not show up with an aluminum deck car carrier or a car trailer. It is a heavy machine. Probably around 8,000 lbs. I have skates and can move the machine to the door. No loading dock. You will have to winch it onto your vehicle. not a bridgeport or haas or clausing mill or machining center. it is a cnc vertical toolroom tool room machinist machine shop milling mill machine. Note that just the 3 stepper motors and the scrap value of the rest of the machine is worth $1000 or more. THIS IS A GOOD DEAL. I have retired and a friend of mine has stored the machine for me for 10 years. It has to be moved. My loss, your ga
|
|
|
Cincinnati Milacron Lancer 1000 VMC milling machine
Cincinnati Milacron Lancer 1000 VMC. I have owned this machine for the past 7 years and it has performed well. The guy that ran it since I bought it retired last month and the other machinists in my shop don't know the control very well. Plain and simple. It's not being used so I'm selling it. I have all the machine manuals and electrical prints for it. It's has a 10,000 rpm 40 taper spindle. X axis travel is 40 inches& Y axis travel is 20 inches& Z axis travel is 22 inches. The tool changer needs a new cam or gearbox. We've been changing tools manually. I encourage you to come see it for yourself if interested. The dump hopper and vise shown in the pictures are not included. This listing is for the machine proper. I'll be happy to answer whatever questions you have. Just ask. This machine is advertised locally, ... moreI will end the auction if sold. Buyer is responsible for all shipping and rigging expenses. We will disconnect the incoming power and drain the coolant.
|
|
|
Cincinnati Hydro-Tel Mills CNC (28-120 and 28-80)
Cincinnati Hydro-Tel Mills CNC(28-120 and 28-80) Description- We have two Cincinnati Hydro-Tel Mills. 28-120 and 28-80. Both in excellent condition. Both Machines were rebuilt and retrofitted by Cincinnati Milacron with Ball Screws and INCON CNC Controls. Both machine were used very lightly by a government contractor and were taken out of service and stored to be put back in service at a different location. However. Their was a shortage of room and now they need a new place to fabricate chips. For more information please send a message or call Nathan 817 994 4864. 0000(NRN) 08/18/2014 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will ... moreanswer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Freight Shipping: Freight Shipping is highly variable in costs over time. Please contact us before paying for your item so we can get you the best rate available at the time and send you an invoice reflecting the savings. We get very good shipping rates and are normally much cheaper than eBay’s freight calculator. Freight Shipping Requiremen
|
|
|
#ERT CINCINNATI-MILACRON 3-AXIS CNC VERTICAL MACHINING CENTER #26820
CNC VERTICAL MACHINING CENTER#26820 New 1993. Serial No 7037-A00-92-0180, Model ERT, EQUIPPED WITH: Acramatic#850SX CNC Control 21-Position Automatic Tool Changer Coolant System(Tank& Pump) Chip Conveyor CATALOGUE SPECIFICATIONS: Table Working Surface. W X L. 26" X 53.9" Table Load Capacity. 2000 LBS X-Axis Table Longitudinal Travel. 49.2" Y-Axis Saddle In/Out Cross Travel. 25.6" Z-Axis Spindle-Head Vertical Travel. 25.6" Spindle Taper. V-Flange. 40 ANSI Spindle Speeds. Infinite Range. 60 TO 8000 RPM X& Y-Axis Feeds. Infinite Range. 100 TO 590 IPM Z-Axis Feeds. Infinite Range. 100 TO 590 IPM Power Rapid Traverse. All Axis' 590 IPM Spindle Motor. Horsepower Cont. 12 HP Spindle Motor. Horsepower MTDR. 15 HP Floor Space Required. W X D. 11'8" X 9'5" Overall Height. 10'10" Weight. ... moreApproximately. 17500 LBS NOTE: There Is A Broken Tool Holder Finger In Tool Changer Between 4th and 5th Tool Pocket. All Other Tool Changer Positions Work. Price Was $14.500.00. PRICE: F.O.B. OUR WAREHOUSE. $9.950.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
|
SABRE-1250 CINCINNATI-MILACRON "ERT" CNC VERTICAL MACHINING CENTER - #26820
SABRE 1250 CINCINNATI-MILACRON CNC VERTICAL MACHINING CENTER#26820 New 1993. Serial No 7037-A00-92-0180, Model ERT, EQUIPPED WITH: Acramatic#850SX CNC Control 21-Position Automatic Tool Changer Coolant System(Tank& Pump) Chip Conveyor CATALOGUE SPECIFICATIONS: Table Working Surface. W X L. 26" X 53.9" Table Load Capacity. 2000 LBS X-Axis Table Longitudinal Travel. 49.2" Y-Axis Saddle In/Out Cross Travel. 25.6" Z-Axis Spindle-Head Vertical Travel. 25.6" Spindle Taper. V-Flange. 40 ANSI Spindle Speeds. Infinite Range. 60 TO 8000 RPM X& Y-Axis Feeds. Infinite Range. 100 TO 590 IPM Z-Axis Feeds. Infinite Range. 100 TO 590 IPM Power Rapid Traverse. All Axis' 590 IPM Spindle Motor. Horsepower Cont. 12 HP Spindle Motor. Horsepower MTDR. 15 HP Floor Space Required. W X D. 11'8" X 9'5" Overall ... moreHeight. 10'10" Weight. Approximately. 17500 LBS NOTE: There Is A Broken Tool Holder Finger In Tool Changer Between 4th and 5th Tool Pocket. All Other Tool Changer Positions Work. Price Was $14.500.00. PRICE: F.O.B. OUR WAREHOUSE. $9.950.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
|
Cincinnati Arrow 500E CNC Vertical Machining Center 20x20 Mill Seimens 2100 VMC
1998 Cincinnati Arrow 500-E CNC Vertical Machining Center Specifications: Control. Siemens 2100. Table Size. 27" x 20" Max Table Load. 770 LBS. X-Axis Travel. 20" Y-Axis Travel. 20" Z-Axis Travel. 20" Spindle Taper. CT 40. Spindle Speed. 6.000 RPM. Spindle Motor. 15 HP. Tool Changer. 21 Positions. Machine Weight. 8.900 lbs. Machine Dimensions. 79"x 79" x 106" Equipped With: Acramatic 2100 Control. Remote Jog Handle. Rigid Tap. Coolant Tank& Pump. Machine was only used at a tech school and is in Excellent condition" Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our ... morefacility before we take it down from eba
|
|
|
Cincinnati 3-Axis Vertical Machining Center 10VC-1000 Mill CNC Milling Machine
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2519160 A: 0013000000CXCfg O: 0065000000SxHbD PA: View Photo Gallery. Request Freight Estimate. Location: Seattle. WA 98108 Item Description. This is a no reserve auction for a Cincinnati 3-Axis Vertical Machining Center 10VC-1000 Mill CNC Milling Machine. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property in ... moreSeattle. WA. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Cincinnati Milacron Model: 10VC-1000 C Type: CNC Vertical Machining Center Serial No: 9507D0384-0144 Features/Specifications: Control: Acramatic 900(900 MC V2 10V) Travels: X-Axis: 40" Y-Axis: 20" Z-Axis: 20" Table Size: 44" x 20" Added Top: 47" x 18" Table Load Capacity: 3.000 lbs Automatic Tool Changer: 24-tool capacity(tools not included) Taper Type: No. 45 Max. Spindle Speed: 4.000 RPM Spindle Horsepower: 15 HP max. 30 min. 10 HP continuous Traverse Rate: Rapid: 400 ipm Feed: 0.1 to 150 ipm Power: 460V- 60Hz- 3 PH Oil skimmer Coolant& lubricating systems Dimensions& Weight: Machine Dimensions(as shown) L 145" x W 114" x H 112" Machine Weight: 15.000 lbs(estimated) Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular. Thorough maintenance performed by consignor since new Note: Machine does not include any tooling or documentation Rigging& Removal: This equipment is sold"as shown" at a production facility owned by The Boein
|
|
|
CINCINNATI ARROW 500 VMC (1998) NO RESERVE
Specification Description TABLE SIZE, 30" x 26" TABLE LOAD CAPACITY, 1500 LBS, TRAVELS( X x Y x Z) 20" x 20" x 25" SPINDLE TAPER, CAT 40, SPINDLE SPEED, 6000 RPM, SPINDLE MOTOR, 10 HP, TOOL CHANGER, 21 ATC, RAPID FEED RATE, 787 IPM, CUTTING FEED RATE, 787 IPM, MACHINE DIMENSIONS, 110" x 90" x 98" MACHINE WEIGHT, 7.300 LBS, Equipped With: ACRAMATIC 2100 CNC CONTROL HAND PENDANT COOLANT TANK ALL AVAILABLE MANUALS PAYMENT: WE ACCEPT FULL PAYMENT VIA BANK WIRE TRANSFERS. CASHIERS CHECKS, OR MONEY ORDERS ONLY WITHIN 48 HOURS OF PURCHASE. CONTACT OUR OFFICE FOR PAYMENT DETAILS. ALL STATE. LOCAL, AND FEDERAL TAXES, FREIGHT AND RIGGING AT CUSTOMER SITE ARE THE RESPONSIBILITY OF THE BUYER TO PAY. THIS MACHINE IS ALSO BEING ADVERTISED AND LISTED LOCALLY THROUGH OTHER SOURCES AND MAY BE SOLD AT ANY TIME. WE RESERVE ... moreTHE RIGHT TO SELL THIS ITEM AND PULL THIS LISTING AT ANY TIME WITHOUT ADVANCE NOTICE. MACHINERY SOURCE. LLC 6530 Revlon Dr. Belvidere. IL 61008 PH: 815-547-0990 FX: 815-547-1631 sales@machinerysource.com Caleb Anderson On Oct-20-14 at 07:13:14 PDT. Seller added the following information: CORRECTED SPECIFICATIONS* TABLE SIZE: 27.56" x 20.47" TABLE LOAD CAPACITY: 770 LBS. TRAVELS: 20" x 20" x 20" NET MACHINE WEIGHT: 6.710 LBS. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-149332361d9-0x109-
|
|
|
Cincinnati Hydro-Tel 28" x 97" Table w/ Areotrace Tracing head model AT3D
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for you this week is this Cincinnati Hydro-Tel 28" x 97" Table w/ Areotrace Tracing head model AT3D. Item spec: Sn/ 1H3V5LE-3. Table size is 28" x 97" OD, 440v, 3 Ph. The tracing head is a Areotrace Model AT3D, Sn/ 285. Buyer is responsible for all shipping costs. If you need a shipping quote we can help.Local delivery is available. Item is sold as is. Inspection by appointment only. Not under power 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-1494287083f-0x10e-
|
|
|
1999 Cincinnati Milacron Arrow 1000 CNC Vertical Mill *CRT Monitor Out*
1999 Cincinnati Milacron Arrow 1000 Vertical Machine Center*Please note- CRT Monitor Is NON-FUNCTIONAL and in need of repair Machine otherwise functions well Machine sold"as is. Where is" No Warranty Control: Acramatic 2100 X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 22" Table Size: 44" x 23.5" Table Load: 2.200 LBS Spindle Taper: CAT 40 Spindle Speed: 8.000 Spindle Motor: 15 HP Tool Capacity: 21 ATC Machine Weight: 9.600 LBS We reserve the right to cancel the auction of this item at any time due to Private Sale Payment Policy We accept payment by wire transfer. Must pay by wire transfer within 48 business hours from auction end. If payment is not received by our bank within 72 hours of auction end. Item will be re-listed without notice. An Unpaid Item Dispute will be filed for any and all unpaid ... moreitems. Additional bank and wire transfer surcharges may apply. Shipping Information Additional Fees(i.e. Skidding. Loading or Special Packaging) may apply to item if required, according to size and type. Item will be shipped 5-7 business days after payment is received. Buyer is responsible for all Rigging and Trucking cost. Winner notifications will be sent to Ebay registered email address. Call or Email us for Shipping Quotes
|
|
|
USED CINCINNATI ARROW 1000 CNC VERTICAL MACHINING CENTER NEW 1998
1) USED CINCINNATI ARROW 1000 CNC VERTICAL MACHINING CENTER NEW 1998 SPECIFICATIONS TABLE SIZE: 44" X 22" X-AXIS TRAVEL: 40" Y-AXIS TRAVEL: 20" Z-AXIS TRAVEL: 22" SPINDLE SPEEDS: 8000 RPM SPINDLE TAPER: CAT-40 TOOL CHANGER: 21 ATC SPINDLE MOTOR: 15 HP DIMENSIONS: 120"X 95"X 96" WEIGHT: 10000 LBS EQUIPPED WITH: ACRAMATIC 2100 CNC CONTROL FULL ENCLOSURE EXTERNAL COOLANT PUMP WITH HOSE TO CLEAN MOUSE- KEYBOARD BOOKS/MANUALS DESCRIPTION VICKERS 2100 PC-BASED CNC CONTROL WITH 14" CRT RS-232C PORT INTERFACE& 3.5" FLOPPY DISK DRIVE TOOL LENGHT PROBING& PART PROBING SYSTEMS FULL FEATURED HAND HELD PENDANT CONTROL STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUALS FOR MORE INFORMATION PLEASE CALL GARY AT 888-998-4440!
|
|
|
Cincinnati #2MI Horizontal Toolroom Milling Machine
Cincinnati#2MI toolroom milling machine. Serial No 2J2P1T-28. 10" x 53" Table with 28" of travel 5HP motor Call or email for more complete specifications Under power video available Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cincinnati Milacron T-35 5-Axis CNC Horizontal Machining Center Mori Okuma HMC
VERY LOW HOURS! You will not find another T series with lower hours. Used one shift as a job shop machine. Not full production. This one is a FULL 5-axis machine. Machine is listed locally and may be removed for local sale. New replacement cost is approx $2M. Shipping is extra. These machines typically sell for about $160K-$200K. Cincinnati Milacron T-35 1994 year model One owner machine The Spindle is 20 to 4000 rpm 3 speed gear box chip conveyor Simultanious 5 axis motion control Torque Controlled Machining Tool Length Measuring Probe Renishaw spindle mounted surface sensing probe Through Spindle Coolant Linear scales in X/Y/Z Storage for 130 tools- 50 Taper. Dual chains 460 Volt 3ph 60 cycle electrics 2 pallet work changer with rail work station turn table In cycle. Power on, Spindle Run Time Meters 75.000 feet of Tape Program Storage(9 ... moreMEGs) Travels X/Y/Z 60/60/62" Acramatic 950. Color CRT with touch screen AC servos in all axis and spindle BCL direct binary code exchange feature(no post processor required) IF YOU ARE INTERESTED IN THIS MACHINE. PLEASE CONTACT US FOR MORE INFORMATION
|
|
|
Cincinnati Versi-Mill
Clutches for table feed are bad.The rest of mill was working when we took it out of service.We didn't use it enough to justify repairs.
|
|
|
Cincinnati Vertical Milling Machine, w / Bridgeport J Series Variable Speed Mill
419-445-1111 SKU: DIS3420 Cincinnati Vertical Milling Machine. W/ Bridgeport J Series Variable Speed Mill. In Stock: 1 Brand: Cincinnati/ Bridgeport Head Condition: Used Country of Manufacture: United States Manufacturer: Cincinnati/ Bridgeport head Horsepower(HP) 1 1/2 Model Year: Unknown Listed By: Glenda Cincinnati Vertical Milling Machine. W/ Bridgeport J Series Variable Speed Milling Head 60- 4200 RPMS, 1 1/2 HP Specs: Travel of Table X Axis: 16" Y Axis: 19" Z Axis: 5" Power Feed Table: 10"x36" Spindle Speeds: 60- 4200 RPMS Quill Travel: 5" Knew Travel: 15" T-Slots: Top: 3/4" Bottom: 1-1/4" Head: 2J Jacobs Chuck Size: 3A 1/8"5/6" Bridgeport Head US Electrical Motor Mod: F-5-09-522 BF 14016 HP: 1-1/2 Phase: 3 Cycle 50 60 Frame: 145TY-4 Type: TVY RPMS: 1430 1730 Design: B Code: K Volts ... more220 230 440 460 Amps 4.5 2.4 Fairbank Morse Motor HP: 1/4 PH: 5 CY: 60 RPM: 1720 Volts: 208 270 440 Amps: 1.241.160.58 Type: QZA Frame: 3555Z All measurements are approximate. The knobs are missing on the power feed control- see last photo) Item unit is in used condition. Background items are not included in this listing. At Dave's Industrial Surplus we strive to make every transaction as smooth as possible. This begins before items are listed. We go through every item with a fine tooth comb to make sure all items are both clean. And complete. We have over 10 years combined experience in Industrial Surplus. We know what we sell so feel assured that you are going to be dealt with in a professional manor from the beginning to the end of your transaction with us. Don't hesitate to contact us with any questions you may have. We love to hear from you. Payment must be received within 4 days of items end. If more time is required please contact us PRIOR to your purchase of any of our items. We prefer Paypal. Please contact us for other payment types accepted. We will not ship any items paid for with a echeck until the check clears our bank. This could take as many as 10 day
|
|
|
CINCINNATI TOOLMASTER VERTICAL MILLING MACHINE - 42" x 10" - MILL
If you have any questions regarding this machine. Please contact Michael@ 909) 652-1400. Make: Cincinnati Model# Toolmaster Serial# 6J1V5D-450 Country of Origin: USA Condition: Great Features: X& Y Axes Power Feeds. Box Bed Ways. Specifications: Work Table: Surface Area: 42" x 10" T-Slot Center Distance: 3@ 2-3/8" centers T-Slot Sizes: 11/16" Travels: X-Axis Table Travel: 22" Y-Axis Table Travel: 10" Z-Axis Table Travel(knee) 17" Quill Travel: 3" Ram Travel: 17" Spindle: Spindle Taper: Monoset Collets Quill Diameter: 2-7/8" Speeds: 140-240-375-630-860-1500-2270-3800 RPM Motor: 1 Horsepower. 220/ 440 Volt, 1,125 RPM, 3.6/ 1.8 Amps, 60 Hz. Head Adjustments: Head Swivel: 90 degrees Head Tilt: 90 degrees. General: Electrical: 220/ 440 Volt. Three Phase Overall Dimensions: 60" x 66" ... morex 78" tall. Comes as shown in pictures. GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically. The Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold“as is” or“subject to inspection” This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege. WARRANTY: Seller makes no warranties of any kind whatever. Expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement. MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller. Nor has the Seller knowledge of, or control over,
|
|
|
CINCINNATI NO. 0-8 VERTICAL MILL LOWER QUILL BEARING OILER (NEEDLE) VALVE
I'M PARTING OUT A CINCINNATI 0-8 VERTICAL MILL. UP FOR AUCTION IS THE NEEDLE VALVE. IT IS IN GOOD CONDITION WITH SOME DINGS IN THE LOWER NEEDLE(SEE PICTURE)
|
|