|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: New Location: Westerly, United States PMC Centering Racks are designed to facilitate the process of creating pallet stacks for conveyance on board airplanes and trucks. The flared uprights ... moreallow for the forklift operator to load multiple pallets at once and the tapered design centers the pallets, creating a stack that is ready for strapping and transfer.
Condition: Used Location: Kent, United States These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Buy It Now
Condition: New Location: Dayton, United States Made By Doosan. Year - 2023. Why The Policy Change?. 110,000.00 Lb. We Rent Forklifts Up To 25,000 lbs. Mast Lift Height: 189"( Top Of The Forks). Stop ... moreworrying about buying over the internet and start saving money now!
Buy It Now
Condition: New Location: Dayton, United States Made By Doosan. Year - 2023. 45439 1/4 Mile Off Of I-75 Exit 50A. Full Factory Warrany In Next Lift Territory. Mast Lift Height: 189"( Top Of The Forks). ... moreLift Capacity: 5000 lbs. Why The Policy Change?.
Buy It Now
Condition: New Location: Dayton, United States Made By Doosan. Year - 2023. Cushion Or Pneumatic Tires. 110,000.00 Lb. We Rent Forklifts Up To 25,000 lbs. Mast Lift Height: 189"( Top Of The Forks). ... moreWhy The Policy Change?. Our new and used inventory changes frequently.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO ZForce 950 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$15.86 Shipping Condition: Brand New Location: Bayswater, Australia 6589665 6534387 6562067. Fits Tilt Cylinder & Bobtach. Bobtach Tapered Pivot Pin : 6732012. IN THE BOBTACH THIS BUSH IS FOR THE. Bobcat ® Wear Bush. compatible ... moreto repace and fit Bobcat ® OEM Part Numbers.
Buy It Now
$65.47 Shipping Condition: Brand New Location: Bayswater, Australia 2 x 1.25" OD 5/8" thread Tapered Pivot Pin - 6732012. 2 x Pivot Pin Wear Bushing - 6589665. 1 x Tilt Cylinder Lower Pivot Pin - 6705223. 1 x Tilt Cylinder ... morePivot Pin Wear Bushing - 6589665. Bob-Tach wedge pin 6737191 pin pivot 7135590 Pivot pin 6707180 Pivot pin 6705223.
Buy It Now
$19.33 Shipping Condition: Brand New Location: Bayswater, Australia Bobcat ® Bob-tach ®. Replaces and fits Bobcat ® OEM Part Numbers. Fits Bobcat ® Models. fits Bobcat ® Skid Steer Loaders Models. S130 SN 524611001 & Above, ... morewith 5/8 " Bolt in the 1.25 " 31.8 mm OD Tapered Pivot Pin 524711001 & Above, with 5/8 " Bolt in the 1.25 " 31.8 mm OD Tapered Pivot Pin.
Buy It Now
$53.84 Shipping Condition: Brand New Location: Bayswater, Australia Bobcat ® Bobtach. Compatible fit for Bobcat ® Wear Bush OEM Part Numbers. Weld In Bush. Compatible to Replace and fit Bobcat ® OEM Part Numbers. Compatible ... morefit for Bobcat ® Tapered Pivot Pin OEM Part Numbers.
Buy It Now
Condition: New Location: Dayton, United States Made By Doosan. Year - 2023. 110,000.00 Lb. We Rent Forklifts Up To 25,000 lbs. Mast Lift Height: 189"( Top Of The Forks). Why The Policy Change?. Our ... morenew and used inventory changes frequently. Check back often for new products and new sales.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO Uforce 1000 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$65.47 Shipping Condition: Brand New Location: Bayswater, Australia 2 x 1.25" OD 5/8" thread Tapered Pivot Pin - 6732012. 2 x Pivot Pin Wear Bushing - 6589665. 1 x Tilt Cylinder Lower Pivot Pin - 6705223. 1 x Tilt Cylinder ... morePivot Pin Wear Bushing - 6589665. Bob-Tach wedge pin 6737191 pin pivot 7135590 Pivot pin 6707180 Pivot pin 6705223.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 600. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$65.47 Shipping Condition: Brand New Location: Bayswater, Australia 2 x 1.25" OD 5/8" thread Tapered Pivot Pin - 6732012. 2 x Pivot Pin Wear Bushing - 6589665. 1 x Tilt Cylinder Lower Pivot Pin - 6705223. 1 x Tilt Cylinder ... morePivot Pin Wear Bushing - 6589665. Bob-Tach wedge pin 6737191 pin pivot 7135590 Pivot pin 6707180 Pivot pin 6705223.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO ZForce 800 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO Uforce 800 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO Uforce 550 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 520. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 85. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 400. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 625. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CF 500. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. Designed ... moreand CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO ZForce 1000 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO X 550. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. Designed ... moreand CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO Uforce 600 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$66.10 Shipping Condition: Brand New Location: Rowville, Australia CFMOTO CForce 1000 . Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia. Made in AUS by Wheel Mod’s.
Buy It Now
$65.47 Shipping Condition: Brand New Location: Bayswater, Australia 2 x 1.25" OD 5/8" thread Tapered Pivot Pin - 6732012. 2 x Pivot Pin Wear Bushing - 6589665. 1 x Tilt Cylinder Lower Pivot Pin - 6705223. 1 x Tilt Cylinder ... morePivot Pin Wear Bushing - 6589665. Bob-Tach wedge pin 6737191 pin pivot 7135590 Pivot pin 6707180 Pivot pin 6705223.
Buy It Now
$19.33 Shipping Condition: Brand New Location: Bayswater, Australia Bobcat ® Bob-tach ®. Replaces and fits Bobcat ® OEM Part Numbers. Fits Bobcat ® Models. fits Bobcat ® Skid Steer Loaders Models. S130 SN 524611001 & Above, ... morewith 5/8 " Bolt in the 1.25 " 31.8 mm OD Tapered Pivot Pin 524711001 & Above, with 5/8 " Bolt in the 1.25 " 31.8 mm OD Tapered Pivot Pin.
|
|
|
|
Johnford Vertical Machining Center. 22" x 51" Table, Fanuc O-M Control, 50 Taper
Johnford Vertical Machining Center with BT-50 Taper. And 20 HP Spindle Motor. 22" x 51" Table and 24 ATC Specification Description Table Working Surface, 51.2" x 22.4" Max Work Load of Table, 2750 lbs. X-Travel, 51.2" Y-Travel, 24" Z-Travel, 28" Table to Spindle, 6.9" 35" Spindle Taper, 50 Taper, Spindle Motor, 20 HP, Spindle Drive System, 2 Speed Gear Box, Spindle Range, 10- 3.600 RPM, Tool Changer, 24 ATC, Machine Weight, 26.000 Lbs. Equipped With: Fanuc O-M Control. Full Enclosure, Spindle Chiller, Spindle Air Blast NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day ... morereturn privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions should be above. Please contact Erik for help on getting Freight Rates(Serious Buyers only-Please don’t waste my time) at(847) 338-7139
|
|
|
50" x 25" KASUGA QUANTUM Q-1250V #50 Taper VMC (Made in Japan)
THIS IS A"SUPER NICE" HEAVY DUTY JAPANESE BUILT#50 TAPER BOX WAY MACHINING CENTER. IF YOU HAVE ANY QUESTIONS. PLEASE CALL RICH AT 760-633-4801 KASUGA QUANTUM Q-1250V VERTICAL MACHINING CENTER NEW 1999 CONTROL: FANUC 18M SPECIFICATIONS: TABLE DIMENSIONS. 63" x 23.6" TABLE LOAD CAPACITY. 3.300 lbs TRAVELS X- AXIS. 50" Y- AXIS. 25" Z- AXIS. 25.6" SPINDLE CENTER TO COLUMN.27.5" SPINDLE NOSE TO TABLE. 6.3" 31.9" SPINDLE SPEED. 6000 RPM SPINDLE MOTOR. 25 HP SPINDLE TAPER. CT50 RAPID TRAVERSE. 787 IPM(X.Y) 590 IPM Z CUTTING FEEDRATE. 393 IPM TOOL CHANGER CAPACITY. 30 ATC MAX. TOOL WEIGHT. 33 LBS. MAX. TOOL LENGTH. 11.8" MAX. TOOL DIAMETER. 4.9" BALL SCREW DIAMETER. 1.57" MACHINE WEIGHT. 21.000 LBS. MACHINE WIDTH. 190" MACHINE HEIGHT. 114" MACHINE LENGTH. 109" EQUIPPED ... moreWITH: FANUC 18M CNC CONTROL RIGID TAPPING CHIP CONVEYOR ALL AVAILABLE MANUALS CLICK ON BUTTON BELOW TO BE INCLUDED ON THE EMC LEASING COMPANY EMAIL LIST OF MACHINES TO BE LIQUIDATED SHORTLY. Join Email List
|
|
|
SANDVIK VARILOCK BORING HEAD 391.38A-1-024 50 124A.(+ 40 taper Holder)
EXCELLENT SANDVIK VARILOCK BORING HEAD 391.38A-1-024 50 124A.+ 40 taper Holder) Boring range of 25mm to 32mm. Adjustment is in 0.01mm increments.
|
|
|
50 mm Milling Cutter on Handmade Morse Taper 3 Adaptor - 99p No Reserve !!
50 mm Milling Cutter on a Handmade Morse Taper 3 Adaptor 50 mm Believed to be on a handmade Morse Taper 3 Adaptor Used Sold as Seen- No Returns No Reserve VAT is included in the price 2866 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 ... morehours must be given, as not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited
|
|
|
2007 Haas VF10 / 50 Taper CNC Machining Center TSC Low Hours Only 3800 Spindle
2007 VF-10/50 Spindle time: 3860 Equipped with: Chip Auger P-Cool Remote Jog Handle 300psi TSC Auxiliary Coolant Filter Probing system Price $159.870.00 Machine Looks New. Haas Will Go Through Machine Picture is Sample VF-10/50- New Price $241.995.00 TRAVELS S.A.E. METRIC X Axis, 120" 3048 mm, Y Axis, 32" 813 mm, Z Axis, 30" 762 mm, Spindle Nose to Table(~ min) 5" 127 mm, Spindle Nose to Table(~ max) 35" 889 mm, TABLE S.A.E. METRIC Length, 120" 3048 mm, Width, 28" 711 mm, T-Slot Width, 5/8" 16 mm, T-Slot Center Distance, 4.92" 125.0 mm, Number of Std T-Slots, 5 5 Max Weight on Table(evenly distributed) 4000 lb 1814 kg, SPINDLE S.A.E. METRIC Max Rating, 30 hp 22.4 kW, Max Speed, 7500 rpm 7500 rpm, Max Torque, 450 ft-lb@ 500 rpm 610 Nm@ 500 rpm, Drive System, 2-Speed Geared Head 2-Speed Geared Head ... moreTaper, CT or BT 50 CT or BT 50 Bearing Lubrication, Air/Oil Injection Air/Oil Injection Cooling, Liquid Cooled Liquid Cooled FEEDRATES S.A.E. METRIC Rapids on X 360 in/min 9.1 m/min, Rapids on Y, 600 in/min 15.2 m/min, Rapids on Z, 600 in/min 15.2 m/min, Max Cutting, 360 in/min 9.1 m/min, AXIS MOTORS S.A.E. METRIC Max Thrust X, 3400 lb 15124 N, Max Thrust Y, 5600 lb 24910 N, Max Thrust Z, 5600 lb 24910 N, TOOL CHANGER S.A.E. METRIC Type, SMTC SMTC Capacity, 30+1 30+1 Max Tool Diameter(adjacent empty) 10" 254 mm, Max Tool Diameter(full) 4" 102 mm, Max Tool Length(from gage line) 16" 406 mm, Max Tool Weight, 30 lb 13.6 kg, Tool-to-Tool(avg) 4.2 sec 4.2 sec, Chip-to-Chip(avg) 6.3 sec 6.3 sec, GENERAL S.A.E. METRIC Air Required, 4 scfm. 100 psi 113 L/min. 6.9 bar, Coolant Capacity, 95 gal 360 L, Machine Weight, 29500 lb 13381 kg, For More Information or To Set Up An Inspection Please Call Maury Cohn 1 800 888 4312
|
|
|
2008 Hurco VMX 84 50 taper, tooling, Coolant thru, optioned out, no reserve
This is a Hurco VMX 84/50 taper that was Hurco's IMTS 2008 machine. Machine shipped to our customer after IMTS 2008. Machine is equipped with 300 psi coolant through spindle. And nearly every software option Hurco sells. Comes with 29 pieces of CT 50 tooling and a handful of pull studs. Company is changing directions and doesn't need the machine anymore. Machine is running and under power ready to inspect. Machine is listed"as is" and customer is responsible for loading. Machine is in central Kentucky and ready for immediate delivery. Questions can be sent to mark@acimachine.com.
|
|
|
2006 Haas VF7/50 CNC Vertical 50 Taper Thru Spindle Coolant Low Hour Machine
2007 Haas VF7 50 CNC Machining Center 2980 Spindle Hours Machine Looks New The Price Includes Prep And Loading Onto Truck Specifications: Control. Haas. Table Size. 28" x 84" Max Table Load. 4.000 lbs. X-Axis Travel. 84" Y-Axis Travel. 32" Z-Axis Travel. 30" Spindle Nose to Table Top. 4" 34" Spindle Taper. CT 50 Spindle Speed. 7500 RPM. Spindle Motor. 30 HP. Rapid Traverse Rates. 600 IPM. Cutting Feed Rates. 500 IPM. Tool Changer. 30 Station Drum. Machine Weight. 25.600 lbs. Equipped With: Remote Jog Handle. Chip Auger. Rigid Tap Ethernet 300 PSI Through Spindle Coolant Programmable Coolant Auxiliary Coolant Filter 16 MB 4 th Axis Pre-wire Renishaw Work& Part Probe Machine Completely Gone Through At Haas Top To Bottom For More Information Please Call Maury Cohn 1-800-888-4312 Haas Okuma Mori Seiki Maza
|
|
|
MAZAK POWER CENTER V20 CNC MACHINING CENTER CNC MILL 50 TAPER M2 CONTROL
SUPER HEAVY DUTY MAZAK MACHINING CENTER. POWERCENTER V20. FULLY CONVERSATIONAL, EASY TO PROGRAM MAZATROL M2 CNC CONTROL. MACHINE TRAVEL 68 X 36 X 36 THIS MACHINE IS NO TOY! ONE BRUTE OF A HEAVY DUTY METAL MOVER! WELL MAINTAINED AND COMING OUT OF TIER-2 MANUFACTURING FACILITY IN NORTHERN MI. 15HP, BOX WAYS, 40 TOOL SIDE ARM ATC, 50 TAPER SPINDLE. HARD TO FIND BIG VMC, REPLACEMENT VALUE IN THE 100'S OF THOUSANDS. IF YOU HAVE THE WORK FOR THIS BEAST ONE JOB WILL PAY FOR ITS COST. ITS DEFINITELY A TYPE OF CNC MACHINE TOOL THAT DOES NOT COME AROUND OFTEN OFFERED AT THIS PRICE. WE WILL LOAD ON YOUR TRUCK, FREIGHT CARRIER AND CHARGES BUYERS RESPONSIBILITY. IF NEED WE CAN PROVIDE YOU WITH COMPETITIVE FREIGHT QUOTES AS WE GET SOME OF THE BEST PRICES IN THE BUSINESS. EMAIL ANY QUESTIONS, NO RESERVE, GOOD LUCK.
|
|
|
Auerbach FBE-1500 CNC Horizontal Production Mill /Machining Center,50 Taper 2001
Please see info below and photos on a very nice Heavy Duty Auerbach FBE 1500 CNC Production Mill. This Machine is a Very High Quality. Heavy Duty, German Built CNC Production Mill w/ a Replacement Price Exceeding $350,000. This is an extremely rare machine that is seldom seen on the used market. This machine can be seen under power in Cincinnati, OH and is in great running condition! I do have the ability to load this machine on your truck. I can shop and get you a freight rate if you want me to. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. AUERBACH FBE 1500 CNC HORIZONTAL PRODUCTION MILL Model FBE 1500. S/N 0063, New 2001 EQUIPPED WITH: Heidenhain TNC-426 CNC Control w/ Color CRT. 16" Programmable CNC Indexer, Overarm w/ Arbor Supports, Centralized Lubrication, Chip Conveyor, ... moreCoolant System. Note: This Machine is a Quality. German Built CNC Production Mill w/ a Replacement Price Exceeding $350,000. CATALOGUE SPECIFICATIONS: Longitudinal Travel(X Axis) 60" Vertical Travel(Y Axis) 40" Cross Travel(Z Axis) 24" Table Working Surface(T-Slotted) 32" x 64" Table Load Capacity. 9.000 LBS. Rotary Table Size. 16" Feed Rate. All Axes. 03 to 236 IPM. Rapid Traverse. All Axes. 590 IPM. Spindle Horsepower. 40 HP. Spindle Speed. Range. 30- 800 RPM. Spindle Taper. 50. Electrics. 460/3/60. Approximate Machine Dimensions. 290" x 191" Approximate Machine Height. 125" Approximate Machine Weight. 30.000 LBS. CONDITION: This Machine Appears to be in Excellent Condit
|
|
|
4" WOTAN B-100 Tbl TYPE HORIZONTAL BORING MILL, w/50 TAPER, PDB, ROTARY Tbl
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 4" WOTAN B-100 Tbl TYPE HORIZONTAL BORING MILL. W/50 TAPER, PDB, ROTARY Tbl Ref# 151716 iammdna XHBMTT 4" WOTAN TABLE TYPE HORIZONTAL BORING MILL MODEL: B100. S/N: 52294, NEW 1965 SPECIFICATIONS: ... moreSPINDLE DIAMETER. 4" SPINDLE TAPER. 50. SPINDLE TRAVEL. 28" SPINDLE SPEED RANGE(21) 14- 1600 RPM. FEED RANGE(9) 010" 064" THREAD PITCHES. 16. 24, 32, 48, 64& 96 TPI. ROTARY TABLE SIZE. 43-1/2" x 49-1/4" VERTICAL TRAVEL OF HEADSTOCK. 48" TABLE CROSS TRAVEL. 54" LONGITUDINAL TABLE TRAVEL. 72" TABLE LOAD CAPACITY. 32.000 LBS EQUIPPED WITH: 50 POWER DRAW BAR. ROTARY TABLE. SIMPLE PENDANT. SOUTHWESTERN INDUSTRIES TRAK 3-AXIS DIGITAL READOUT. RAPID TRAVERSE ALL DIRECTIONS. COOLANT PUMP. 15 HORSE POWER MAIN MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Wotan Machines Click Here For More Boring Mills- TABLE TYPE HORIZONTAL BORING MILLS(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest mach
|
|
|
Mitsui Seiki HR7A CNC Horizontal Boring Mill, 50 Taper, Fanuc Control
Mitsui Seiki Model HR7A 5-Axis CNC Horizontal Boring Mill. S/N 121, New Approx 1986. Stock# 30559 Preliminary Specifications: Quill Diameter- 4.5" Spindle Taper- 50 Spindle Speeds- 2400 RPM max Table Size- 51" x 51" Max Weight on Pallet- 6.615 Lbs. B-Axis Rotary Table Indexing- Full 360º X-Axis Travel- 70" Y-Axis Travel- 59" Z-Axis Travel- 39" Quill Travel- 21" Max Feed Rate- 167 IPM ATC Capacity- 60 Tools Weight. Approx- 40,000 Lbs. Equipped with: Fanuc 9 CNC Control Recently Rebuilt B-Axis Table Recently Rebuilt X-Axis Ballscrew Capable of adding 6th Axis on top of Rotary Table Recently Replaced Scales Chip Conveyor Arm Style Tool Changer Table Enclosure Coolant System Some Manuals/ Wiring Diagrams PRICE: $99.000.00 USD FOB TRUCK DAYTON OH. Note- recently removed from Aerospace Mfg Facility. Machine ... morehas only had one operator and has been well maintained. It is offered as removed from service. Specializations subject to verification by the buyer. Machine has been disassembled for transport and is not available for inspection under power but we offer the following videos taken just prior to disconnect. View video: Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. Local sales tax is 7% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information.
|
|
|
2003 Okuma MC-V4020 50 Taper Vertical Machining Center OSP-E100M Thru Spindle CT
2003 Okuma MC-V4020 50 Taper Vertical Machining Center. Machine is in excellent running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358 with any questions. Specifications: Control. OSP-E100M. X Axis Travel. 40” Y Axis Travel. 20” Z Axis Travel. 17.7” Table Size. 48"x20” Max. Weight on Table… 1.500 Lbs. Spindle Motor. 20 HP Spindle Speeds. 6.000 RPM. Spindle Taper. CT 50. ATC. 32. Approximate Dimensions… 130”x107”x104” Approximate Weight… 15.900 LBS. Equipped With: OSP-E100M CNC Control High Pressure Through Spindle Coolant Heilical Interpolation Hi-Cut Hi G Syncronized Tapping 50 Taper!FINANCING AVAILABLE! Please contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid ... moreby the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For t
|
|
|
CNC ENSHU 50 TAPER MILL LOTS OF TOOLING REAL NICE CONDITION
LARGE CNC 50 TAPER MILL Nice Machine any questions call 603-521-5241 X-Axis 63.0" Y-Axis 24.8" Z-Axis 24.8" Spindle Taper 50. FANUC 15 TM Control. Tooling Includes. Assorted 50 Taper Tool Holders. 10.0" Vice. 6.0" Vice. 50 Taper Right Angle Head and collets 18.0: Troyke Horizontal. Vertical Index head HASS CONTROL We have owned this machine since 1997 always well cared for and maintained. We will load onto your truck and help make shipping arrangements.
|
|
|
Mori Seiki MH 50 Horizontal Machining Center CNC Cat 50 Taper True 5th Axis
Mori Seiki MH 50 Horizontal Machining Center X: 27.953" Y: 24.016" Z: 23.622" RPM: 6000 rpm# ATC: 120 Taper: CAT 50 Control: FANUC 15M 16" Rotary Table Our Tech Can Train You On The Control and Machine in Southern California For Inspection Please Call Maury Cohn 1 800 888 4312 haas. Fadal,makino,miyano,mazak,okuma,leadwell,bridgeport
|
|
|
2007 Haas VF 10 50 Taper Vertical Machining Center CNC
Haas VF10 Vertical Machining Center 2006 Installed 2007 X 120" Y 32" x Z-30" Approx 4500 Spindle Hours 50- taper geared-head. 30 hp(22.4 kW) vector drive, 7500 rpm. 30+1 side- mount tool changer, 360 ipm(9.1 m/min) X rapids. 600 ipm(15.2 m/min) Y& Z rapids, Automatic chip auger, Programmable coolant nozzle. Remote jog handle. 15" color LCD monitor, USB port. 1 MB program memory, Rigid tapping 80-gallon flood coolant system. Outriggers standard. VISUAL QUICK CODE PROBING SYSTEM. INCLUDES TOOL SETTING PROBE& WORK OFFSET PROBE TSC Through-Spindle Coolant, 300 psi(21 bar)1 0.00 0.00T ACF Auxiliary Coolant Filter System. 25-micron filter1 0.00 0.00T HIL External High-Voltage Isolation Transformer; 420-510:240V. 60 Hz only, 40/30 hp(30/22 kW) 45 KVA(AVAILABLE IF NECESSARY* SERIAL NUMBER* 1052771 Price $158.000.00 FOB ... moreSeattle Washington For More Information or To Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
Haas VF-5 50 Taper CNC Vertical Machining Center Mill Thru Spindle Coolant 30hp
1998 Haas VF-5 50 Taper Vertical Machining Center Specifications: Control. Haas Table Size. 23" x 52" Max Table Load. 4.000 lbs X-Axis Travel. 50" Y-Axis Travel. 25" Z-Axis Travel. 25" Spindle Nose to Table Top. 7" 32" Spindle Taper. CT 50 Spindle Speed. 5000 RPM Spindle Motor. 30 HP Rapid Traverse Rates. 710 IPM Cutting Feed Rates. 500 IPM Tool Changer. 20 Station Drum Machine Weight. 14.600 lbs Machine Dimensions. 114"L x 148"W x 126.5"H Equipped With: Programmable Coolant Nozzle Rigid Tap Chip Auger 4th Axis Pre-wire Remote Jog Handle Through Spindle Coolant 3.5" Floppy Disk Drive 2 Speed Gear Box 1 MB of Memory Custom Macros Quick Code Coordinate Rotation& Scaling Please contact Jason Stob 708-790-3358 with any additional questions. Jason@520machinery.co
|
|
|
1998 Haas VF-6 50 Taper CNC Vertical Machining Center VMC Mill CT50 Rigid Tap
1998 Haas VF-6 50 Taper CNC Vertical Machining Center Specifications: Control. Haas Table Size. 64"x 28" Max Table Load. 4.000 lbs X-Axis Travel. 64" Y-Axis Travel. 32" Z-Axis Travel. 30" Spindle Taper. CT 50 Spindle Speed. 5.000 RPM Spindle Motor. 30 HP Tool Changer. 20 Equipped With: Linear Scales Rigid Tap 4th Axis Pre-wire Chip Auger Programmable Coolant Nozzle Quick Code Coordinate Rotation& Scaling Custom Macros Brushless Servos 3.5" Floppy Drive 2-Speed Gear Box 4 MB of Memory Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please ... moreverify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is
|
|
|
Haas VF-6 50 Taper CNC Mill Vertical Machining Center 4th Axis Prewired 1999
1999 Haas VF-6 50 Taper Mill Specifications: Control. Haas Table Size. 64"x 28" Max Table Load. 4.000 lbs X-Axis Travel. 64" Y-Axis Travel. 32" Z-Axis Travel. 30" Spindle Taper. CT 50 Spindle Speed. 5.000 RPM Spindle Motor. 30 HP Tool Changer. 20 Equipped With: 1 MB of Memory 4th Axis Pre-wire Chip Auger 3.5" Floppy Auxiliary Home Button Internal Transformer Custom Macros Programmable Coolant Nozzle Quick Code Programming Remote Jog Handle Rigid Tap Please contact Jason Stob 708 790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip ... moreCode here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/
|
|
|
Haas VF11 / 50 Taper CNC Vertical Machining Center 2008 4th Axis Rotary Table
2008 Haas VF11/50 Vertical Machining Center Low Hours Machine Has Been Thoroughly Inspected By Haas Specifications X 120" Y 40" Z 30" 50- Taper Geared-Head. 30 hp Vector Drive. 7500 rpm. 30+1 side- mount tool changer. 360 Ipm X rapids, 600 Ipm Y& Z rapids. Automatic Chip Auger, Programmable Coolant Nozzle. Jog Handle. 15" Color LCD Monitor. USB Port. 1 MB Program Memory. Rigid Tapping and 95-gallon(360 liter) flood coolant system. Outriggers Standard. Anchor kit highly recommended for installation. Options Equipped: HIL High-Intensity Lighting; dual halogen external lights TSC Through-Spindle Coolant. 300 psi(21 bar) WIPS-R-EC Wireless Intuitive Probing System; Renishaw wireless tool-setting probe and Renishaw wireless work offset probe; includes macros, spindle orientation and coordinate rotation and scaling 4AXBL ... more4th-Axis Drive and Wiring only. For brushless-type rotary tables MCL Mobile Chip Lift; conveys chips from auger chute on machine into 55- gallon drum or hopper. Ideal for high-volume chip production, APC machines or for cleanup. HRT450 450 mm(17.7" Servo Rotary Table. 7.5" Thru-Hole CK-16 16" 3-Jaw Scroll Chuck with 8-5/8" Bore. Adapter plate. Mounting bolts/T-Nuts. And(1) Set of Hard Jaws HTS11.5 Manual Tailstock. 11.5" For More Information Or To Inspect Please Call Maury Cohn 1 800 888 4312 fadal.Okuma,mori seiki, makino,cnc,
|
|
|
Mori Seiki SV 50 40 Taper CNC Vertical Machining Center, Rigid Tapping
Mori Seiki SV-50/40 Vertical Machining Center Model# SV-50/40 Mfg: 1998 Specifications: Table Size… 43.3” x 23.6” X-Axis… 31.5” Y-Axis… 20.1” Z-Axis… 20.1” Table Load… 2.200 lbs Spindle Speed… 10.000 RPM Spindle Taper… 40 Taper– CT 40 Rapid Rate… 1259 IPM Horse Power… 30 HP Automatic Tool Changer… 20 Position ATC Machine Weight… 17.10 0 lbs Equipped With: Mori MSC-518 CNC Control- High Pressure Coolant System- 2) Chip Conveyors- Rigid Tapping- MistBuster For More Info or To Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
HAAS VF11 / 50 Taper 2008 4th Axis VERTICAL MACHINING CENTER 30 POS TOOL CHNGR
Haas VF11/50 2008 Vertical Machining Center 1391-071114 Year: 2008 Machine Description VF-11/50 Vertical Machining Center; 120" x 40" x 30" 3048 x 1016 x 762mm) 50- taper geared-head. 30 hp(22.4 kW) vector drive, 7500rpm. 30+1 side- mount tool changer. 360 ipm(9.1 m/min) X rapids, 600 ipm(15.2 m/min) Y& Z rapids. Automatic chip auger, programmable coolant nozzle. Color remote jog handle. 15" color LCD monitor, USB port. 1 MB program memory, rigid tapping and 95-gallon(360 liter) flood coolant system. Outriggers standard. Anchor kit highly recommended for installation. HIL High-Intensity Lighting; dual halogen external lights TSC Through-Spindle Coolant. 300 psi(21 bar) WIPS-R-EC Wireless Intuitive Probing System; Renishaw wireless tool-setting probe and Renishaw wireless work offset probe; includes macros, spindle ... moreorientation and coordinate rotation and scaling 4AXBL 4th-Axis Drive and Wiring only. For brushless-type rotary tables 5AXBL 5th-Axis Drive and Wiring only. For AC brushless-type rotary tables HRT450 450 mm(17.7" Servo Rotary Table. 7.5" Thru-Hole CK-16 16" 3-Jaw Scroll Chuck with 8-5/8" Bore. Adapter plate, Mounting bolts/T-Nuts. And(1) Set of Hard Jaws HTS11.5 Manual Tailstock. 11.5" 292 mm) center height CONDITION: VERY GOOD We can coordinate shipping This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid ac
|
|
|
Milltronics VM30XP 50 Taper CNC Vertical Machining Center 2005 CTS
MILLTRONICS VM30XP 3-Axis 50 Taper CNC Vertical Machining Center. S/N 8560, New 2005. Stock# 30834 Specifications: Table Size- 56" x 24" Travels(XYZ) 60" x 30" x 24" Throat Distance. Spindle to Column- 30" Maximum Table Load- 5000 Lbs. Spindle Taper- CT50 Spindle Motor- Belted Spindle 35/25 HP Spindle Speeds- 50 to 8000 RPM Coolant Thru Spindle- 300 psi Double Arm ATC- 32 Pockets Tool Change Time- 7.5 Sec Tool to Tool Servo Type- Digital. AC Brushless Rapid Traverse Rate- 1000 ipm Max Feedrate(Part Dependent) 500 ipm Floor Space Required- 187" x 116" Machine Weight. Approx 22,000 Lbs. Equipped with: Milltronics 7200 CNC Control Marposs Part Probe System CTS Inferface and 300 PSI Pump Chip Auger Full Enclosure PRICE: $59.500.00 USD FOB TRUCK DAYTON OH. Offered locall y an d subject to prior sale. Also ... moresu bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
50 ISO INT TAPER HORIZONTAL MILLING ARBOR 40 MM X 600 MM LONG SPACERS AND NUT
ISO 50 INTERNATIONAL TAPER HORIZONTAL MILLING ARBOR ISO 50 TAPER X 40MM X 600 MM WORKING LENGTH COMPLETE WITH SPACERS AND NUTS FULL WORKING ORDER. SEE PHOTOS. MORE AVAILABLE ON REQUEST FAST. FREE DELIVERY. UK di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1487b4a5352-0x10d-
|
|
|
50 ISO TAPER INT HORIZONTAL MILLING ARBOR 1 1/2" / 38.1MM X 24" LONG SPACERS NUT
ISO 50 INT TAPER HORIZONTAL MILLING ARBOR ISO 50 X 1 1/2" X 24" WORKING LENGTH 38.1MM X 600MM COMPLETE WITH SPACERS AND NUTS FULL WORKING ORDER. FAST. FREE DELIVERY. UK
|
|
|
Shizouka Vertical Milling Machine,11" x 43" Table, Power Knee & Feed, 50 Taper
Miller. Vertical, Heavy duty vertical mill, 2 size mill Specification Description Table Size, 43.25" x 11" Long. Travel of Table, 29-1/2" Cross Travel of Table, 10.25" Vertical Travel Of Knee, 17.75" Long. Power Feed, 60" 29" P.M. Long. Rapid Traverse, 41.25" Vertical Rapid Traverse, 124-3/8" Spindle Speeds(9) 78- 1.200 RPM, Spindle Nose, N.T. 50, Distance. Spindle Nose to Table, 0- 17.7" Distance. Spindle Center to Column, 11.8" Head Swivel Angle, 45 Degree, Quill Travel, 3.5" Main Motor, 5 HP, Weight. Approx, 4.620 Lbs. Dimensions. Approx, Equipped With: Power Feed. Power Knee, 50 Taper, Coolant, Rapid Traverse, Swiveling Spindle Head, Manuals, 6 Assorted Tool Holders NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete ... moreand accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. Dimensions and Weight should be above. Contact E-Bay Sales@ 847-290-0167 Ext. 135 or 133 if you have any questions on the machine. NOTE: This machine can be picked up in Elk Grove Village. IL( near O'Hare) All Machines are loaded for Free unless unusual circumstances NEED HELP OR HAVE ADDITIONAL QUESTIONS! Feel Free to call us direct at 847-290-0167… ask for Ebay Sales. Don't see what you want on E-bay? Give us a call… less than half our Inventory is on e-bay, and we have new machines coming in every week! Check out more machines online at Myers Technology Co!
|
|
|
Mazak 515 50 taper (1994) CNC - Includes 4Th Axis and Renishaw Probe System
Mazak 515 50 taper(1994) CNC- Includes 4Th Axis and Renishaw Probe System Specifications: TABLE SIZE:51.2 X 21.7" X-AXIS TRAVEL:40" Y-AXIS TRAVEL:20" Z-AXIS TRAVEL:22" SPINDLE TAPER:50 SPINDLE SPEED:6000 RPM Equipped With: MAZATROL M-32 CONTROL Includes 4th AXIS CHIP CONVEYOR RENISHAW PROBE TOOL SETTER SIDE MOUNT TOOL CHANGER MACHINE DIMENSIONS: APPROX. 144"x126"X120" NET WEIGHT: APPROX. 20.000 LBS. Specifications subject to buyer verification Machine will manufacture tight tolerance parts to under.001" tolerances. Machine can be inspected under power. To view please call Graham to make an appointment at 604-525-1774.
|
|
|
2004 Haas VF6 50 Taper TSC CNC Vertical Machining Center
2004 Haas VF-5 50 Taper CNC Vertical Machining Center Specifications: Machine Control Haas 32bit CNC Control Table Sie 64" x 28" Machine Travels(X/Y/Z) 64" x 32" x 20" Spindle To Table Distance 4" 34" Table Capacity 4.000 lbs Spindle Taper 50 Taper Spindle Speeds 7.500 Max RPM Transmission 2- Speed Gearbox Rapid Traverse Rate(X/Y/Z) 540 IPM on X. 600 IPM Y and Z Maximum Cutting Feed Rate 500 IPM Tool Changer Style Side Mount Tool Changer. Twin Arm Tool Changer Capacity 30 Station Tool Change Time 2.8 Sec. Tool to Tool Max Tool weight 12 Lbs. Spindle Drive 30 HP Equipped With: Haas 32-Bit CNC Control. 7500 RPM Spindle, 30 HP 2-Speed Gearbox. 30 Station Side Mount Tool Changer. Remote Jog Handle. Floppy Drive. Renishaw Touch Probe. Chip Auger. Through Spindle Coolant. RS-232 Port. Coolant Pumps and Tank. Manuals. ... moreElectrics: 208-230Volt 3 Phase Approximate Machine Dimensions: 184"l x 123"w x 124"h Approximate Weight: 24000 lbs. Location: MN FOB Price: $79.500.00 For More Info Or To Inspect Please Call Maury Cohn 1 800 888 4312 Haas VF-6/50 CNC Vertical Machining Center Haas VF-6/50 CNC Vertical Machining Center Haas VF-6/50 CNC Vertical Machining Center Haas VF-6/50 CNC Vertical Machining Center Haas VF-6/50 CNC Vertical Machining Center Haas VF-6/50 CNC Vertical Machining Center
|
|
|
Hitachi Seiki Horizontal mill Type 3ML-P 13" x 63" table 50 taper
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is this Hitachi Seiki Horizontal mill Type 3ML-P 13" x 63" table 50 taper. Item needs an on/off safety switch. Item powers up. Spec: sn/ N-6862. 200/220/440v, 3ph. Buyer is responsible for all shipping costs. Item weight is approx, 10000 lbs. Local pick up or delivery is available,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1494287072c-0x112-
|
|
|
LEBLOND MAKINO HEAVY DUTY 50 TAPER CNC VMC MACHINING CENTER FANUC NO RESERVE
Leblond Makino Model FNC106A CNC Vertical Machining Center with#50 Taper Spindle Speeds to 3500 RPM. 20 HP, 55' x 23' Worktable, 41' X-Axis, 23' Y-Axis, 22' Z-Axis Travels, Fanuc OM/11M CNC Pendant Control with Remote Pulse Generator, RUNS GREAT. LOW HRS, WELL MAINTINED. THIS MACHINE WILL REMOVE SOME MATERIAL! HD-BOX WAYS, CAT-50. WE WILL LOAD ON YOUR TRUCK FREE OF CHARGE. DON'T MISS THIS ONE, IF YOU NEED A GREAT RUNNING BIG VMC AT THE FRACTION OF COST FROM DEALERS. EMAIL ANY QUESTIONS. MACHINE MUST BE PAID FOR BY NO LATER THAN 48 HRS AFTER AUCTION END. ABSOLUTELY NO PLAY PAY. CERTIFIED FUNDS, OR WIRE TRANSFER ONLY.
|
|
|
2003 Hurco VMX-50-40 taper Ultimax 4, 50x26 10K $39,000 no reserve, under power
This item is a used Hurco VMX 50-40 taper machine we are listing for a customer/friend. Our company sold the machine new and have serviced it since 2003. Machine was installed in April of 2004. It is very well equipped. If you are interested you need to come to central KY to see it. It is listed and sold AS IS. It is under power. Since we are listing this for someone else. An inspection can be performed for a fee. This can include overall inspection, Ball bar, and Renishaw Laser. Equipped with: Coolant through spindle. Troyke Indexer and control(never been used) Renishaw NC tool setting Laser probe, 10,000 RPM spindle, Software list: Ultipocket, Probing, DXF, Rigid Tap, Advanced velocity control, Part Probing, Tool Probing, and helical ramp/entry. Although the machine is not in our facility we can provide some history. It ran single shift ... morejob shop style work most of it's life. It did do some production work on aluminum armor during the Iraq war. It comes with a very nice selection of tooling. These are not"picked over" junk holders. But the balance of the tooling the customer kept for themselves. It has a newly refurbished X axis ball screw, and we will install or repair the right screen which has a glitch. KY residents will be required to pay sales tax. Customer is responsible for rigging.
|
|
 |