ROCKWELL-DELTA 12" x 36" WOOD LATHE ~ SINGLE PHASE
ROCKWELL-DELTA 12" x 36" WOOD LATHE- ROCKWELL-DELTA 12" x 36" WOOD LATHE ~ SINGLE PHASE INVENTORY# 5707 MODEL: 46-525 S/N: EPS901 MADE IN THE USA SPECIFICATIONS: SWING OVER BED: 12" GAP IN BED: 1 1/2" DISTANCE BETWEEN CENTERS: 36" BED SIZE: 44" x 5 1/2" SPINDLE THREAD: 1" x 8 TPI HEADSTOCK TAPER: 2 MT TAILSTOCK TAPER: 2 MT TOOL REST DIAMETER: 1" SPEEDS(VARIABLE) 340- 3600 MOTOR: 3/4 HP/ 1725 RPM/ 115/230 V/ SINGLE PHASE EQUIPMENT INCLUDED: STAND WITH WOOD STORAGE CABINET* FACE PLATE* LIVE CENTER* 2) TOOL REST BED CLAMPS* DOUBLE TOOL REST* 6) VARIOUS TOOL RESTS* SANDING DRUM FOR HEADSTOCK LOCATED IN OUR BALTIMORE. MD WAREHOUSE SHOP MORE LATHES HERE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. ... more9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic.
|
|
DELTA ROCKWELL 11" WOOD LATHE INDEXING PIN - 9/16" DIAMETER WITH OFFSET END
PLEASE FEEL FREE TO CONTACT ME FOR A SHIPPING QUOTE IF YOU WANT TO BUY MULTIPLE ITEMS. I WILL GLADLY SHIP ITEMS TOGETHER AS LONG AS IT IS SAFE TO DO SO.
|
|
CAST IRON LEG SET from a vintage Delta Rockwell Milwaukee 460 wood lathe.
Shipping to USA 48 states only. This auction is for the two cast-iron legs from a vintage Delta Rockwell Milwaukee model 1460 12" wood lathe. Left outside for a while and covered with a thin coat of rust. Otherwise in excellent condition with no cracks. Chips, or other damage. And best of all, there are no holes drilled in them for mounting switches and things. Each leg weighs 36 pounds. This auction is for the two cast-iron legs only. Thanks for looking!
|
|
Delta Rockwell 3-JAW LATHE CHUCK - EXCELLENT!
ESTATE FIND You are bidding on a used but in very nice condition a 3- JAW METALWORKING LATHE CHUCK with the wrench and an extra set(new) inside Jaws. This chuck. I believe is for a 10 inch Delta Rockwell Lathe since all of the parts I've been listing has been Delta Rockwell parts. Please look at the measurement seen by the ruler as to the actual size of the chuck. This chuck has very slight oxidation on the metal surface which causes slight discoloring. As seen in the photographs the item looks almost new! Low starting bid as with all of my auctions! Bid with confidence. The items pictured are the items the winning bidder will receive. 100% Satisfaction Guaranteed! Ships USA ONLY! 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13edeee5380-0xfe-
|
|
1960's Delta Rockwell 12" wood lathe tailstock main casting
1960's Rockwell wood lathe tailstock main casting. No cracks. $13.50 shipping to 50 + states.
|
|
Delta Rockwell wood lathe tool rest 12" DDL12 Cat. No. 692
12" tool rest from an 11" Delta Rockwell lathe. Comes as pictured. Check my other auctions for other parts from this lathe. If you are looking for something specific. Feel free to let me know- I might have it! We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
Rockwell / Delta 46-525 12" x 36" Wood Lathe + NO RESERVE!
Manufacturer: Oliver Model: 46-525 12" x 36" Wood Lathe Serial: 1752615 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th AND ANYTHING LEFT ... moreIN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. 12" x 36" Speeds: 340- 3600 Swing Over Bed: 12" Gap In Bed: 1 1/2" Distance Between Centers: 36" Bed Size: 44" x 5 1/2" Spindle Thread: 1" x 8 TPI Headstock Taper: 2 MT Tailstock Taper: 2 MT Toorl Rest Diameter: 1" Speeds(variable) 340- 3600 Electrical: 115 V 1 PH*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold for Holland Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. Powere
|
|
ROCKWELL-DELTA 12" x 36" WOOD LATHE ~ SINGLE PHASE.price Drop I Need Room!
delta/rockwell variable speed lathe 12" swing very good shape.new grizzly motor 1hp single phase 110v or 220 volt misc. tooling Posted with
|
|
VINTAGE ROCKWELL DELTA MILWAUKEE TABLE SAW UNISAW MOTOR 1 HP 1 PHASE 115/230 V
WarnerSales Warner See all my listings: WarnerSales VINTAGE ROCKWELL DELTA MILWAUKEE TABLE SAW UNISAW MOTOR 1 HP 1 PHASE 115/230 V Offered is a VINTAGE Delta Unisaw Bullet Motor. Model: PM-85C010-CCW. Description: H.P. 1. Volts: 115/230. RPM: 1725. Cycle: 60. Single Phase. Type: SR. Amps: 11.8/5.9. This item is in good USED working condition. It is missing the wiring box cover and one of the screw tabs for the cover is broken off. The aluminum pulley that was connected to the motor shaft cracked which made it wobble so it widened the key way on one side.see photos) FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as ... morewe can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an
|
|
VINTAGE DELTA ROCKWELL MILWAULKEE LATHE TAILSTOCK / BANJO WRENCH - NR - (125)
UP FOR AUCTION IS A VINTAGE DELTA ROCKWELL MILWAULKEE TAILSTOCK/ BANJO WRENCH.IT FITS A 3/4" NUT.CAT. 942 IS STAMPED ON THE BACK OF THE HANDLE.THERE IS PAINT MISSING. SCRATCHES, RUST, ETC. THAT IS TYPICAL OF A WRENCH THIS AGE.PLEASE SEE PICS. SOLD AS IS. THIS IS A NO RESERVE AUCTION… I WILL ALWAYS COMBINE SHIPPING ON MULTIPLE PURCHASES WHERE POSSIBLE…PLEASE EMAIL FOR SHIPPING QUOTE… ALSO. PLEASE DON`T PUNISH ME BY LEAVING LOW DSR`s FOR SHIPPING COSTS AND SHIPPING TIME…I CHARGE WHAT THE EBAY CALCULATOR CALCULATES FOR CANADA POST…I USUALLY SHIP WITHIN 24 HRS OF RECEIVING CLEARED PAYMENT(EXCLUDING HOLIDAYS)AFTER THE PACKAGE LEAVES MY HANDS AT THE POST OFFICE, IT IS OUT OF MY CONTROL ON HOW LONG IT TAKES TO ARRIVE AT IT`S DESTINATION… PLEASE ASK ALL QUESTIONS BEFORE BIDDING AS ALL SALES ARE FINAL.NO RETURNS.NO REFUNDS… PLEASE DO NOT BID ... moreIF YOU HAVE NO INTENTION OF PAYING! IF YOU HAVE LESS THAN 5 FEEDBACK. PLEASE EMAIL ME FOR PERMISSION TO BID, OTHERWISE, BID WILL BE CANCELLED… I WILL SEND AN INVOICE AFTER THE AUCTION ENDS INCLUDING CORRECT SHIPPING CHARGE… PAYPAL PAYMENT APPRECIATED WITHIN 48 HRS AFTER AUCTION END.SHIPPING WITHIN 24 HRS OF CLEARED PAYMENT.IF YOU CANNOT PAY WITHIN 48 HRS. PLEASE EMAIL THROUGH EBAY MESSAGING SYSTEM TO ARRANGE PAYMENT PLAN… WILL SHIP WORLDWIDE EXCEPT TO ITALY AND TO P.O. BOXES. ALL DUTIES. IMPORT FEES, CUSTOMS CHARGES, TAXES, LEVIES, ETC. ARE THE RESPONSIBILITY OF THE BUYER, NOT THE SELLER. THANKS FOR LOOKING! HAPPY BIDDING! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f46676658-0x101-
|
|
MOTOR from a vintage Delta Milwaukee Rockwell 12" wood lathe ½HP, 115/230V, 1Ø
I will not be able to ship this until June 24th on account of I will be AWOL until then. SHIPPING to USA 48 states only. No charge for pick up in Vista CA 92083 This auction is for the ½HP. 115/230V, 1Ø, 1725 RPM motor pictured below. Four step pulley included. Thanks for looking!
|
|
Wood Lathe Banjo and Clamp Rockwell, Delta, Craftsman Vintage Woodworking
Wood Lathe Banjo and Clamp Rockwell. Delta, Craftsman Vintage Woodworking. I DO NOT KNOW THE BRAND OR MODEL NUMBER FOR THE LATHE IT CAME OFF OF. 5/8" TOOL REST HOLE- 2 1/4" BED GAP.
|
|
Milling attachment for 10 inch Rockwell, Delta or Atlas metal lathe
This is an Atlas milling attachment for their 10- 12-inch lathes that has been adapted to fit a 10-inch Rockwell/Delta lathe. I adapted this attachment when I replaced my Atlas lathe with a Rockwell and discovered that Rockwell didn't make a milling attachment for their 10-inch lathe. Photos 8 and 9 show it attached to my 10-inch Rockwell. Note that there are no degree marks on the adapter plate- you'll need to do the Y-axis setup with an indicator or angle blocks. I used it for years(until I got a milling machine) and it works very well. It is in good condition except for the vice portion which has suffered at the hand of an unskilled/uncaring previous owner(see photos) The damage doesn't affect the operation. It is missing one nut for a gib screw but is otherwise complete. It may be returned to use on an Atlas lathe by removing ... morethe adapter plate- included are the Atlas clamping bolts and pins. Photo 10 shows a standard Atlas base for comparison. While I have been a buyer on ebay for years. This is my first attempt at selling. Please look at the photos carefully and ask questions before bidding. Shipping to U.S. only.
|
|
Rockwell Delta variable speed wood lathe ( pair )
Delta Rockwell wood lathes Have 2 variable speed wood lathes for sale. Both have 3ph motors. The first lathe( photos 1-4) is a complete machine. The second machine is missing some parts. Have a full shield to go with the units. No tool rest or tooling. Only what is pictured.
|
|
CAST IRON LEG SET from a vintage Delta Rockwell Milwaukee 1460 wood lathe.
Shipping to USA 48 states only for the stated price. This auction is for the two cast-iron legs from a vintage Delta Rockwell Milwaukee model 1460 12" wood lathe. This pair is in excellent condition with no cracks. Chips, or other damage. And best of all, there are no holes drilled in them for mounting switches and things. Each leg weighs 36 pounds. This auction is for the two cast-iron legs only. Thanks for looking!
|
|
BROKEN BANJO from a vintage Delta Milwaukee Rockwell wood lathe
SHIPPING to USA 48 states only. No charge for pick up in Vista CA 92083 This auction is for the broken tool rest holder pictured below. Could be an easy repair for someone with the right skills. Thanks for looking!
|
|
*Delta*Rockwell* Wood Lathe~Counter Shaft~Great Working Condition!! Countershaft
Here's a Great Used DELTA ROCKWELL CounterShaft for a Wood Lathe This one's from a 46-111 Lathe, but this same unit has been used by Delta& Rockwell for decades on many models. This unit is in Great Condition! I took it all apart, removed a small amount of rust, and smoothed some minor burrs/ scratches left behind by set screws. Then lubed. And re-assembled it. The pulleys(s: 932 and 720) are in Great shape. All the parts move freely, fit together well, and spin smoothly. Nice Unit! Let me know. If you need more photos, or have questions. 14-Day Return, and Free Shipping! in the lower 48 states) Thanxx!
|
|
Delta Rockwell Milwaukee Switch Rod and Support Bracket Guide
DELTA ROCKWELL MILWAUKEE SWITCH ROD AND SUPPORT BRACKET. FROM A MODEL 1460(46-305) 12" WOOD LATHE. THE SWITCH ROD IS 18 1/2" LONG THIS LISTING IS FOR THE SWITCH ROD AND SUPPORT BRACKET THAT GOES INTO THE WOOD SHELF ONLY. THIS PART IS IN EXCELLENT CONDITION. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
Delta Rockwell Milwaukee 7 3/4" Wood Lathe Tool Rest w/ 1" Post
7 3/4" TOOL REST. CAME WITH A 1952 DELTA ROCKWELL MILWAUKEE MODEL 1460(46-305) 12" WOOD LATHE. HAS 1" POST. THIS PART IS IN EXCELLENT CONDITION. I AM GUESSING THAT IT WAS CUT DOWN FROM A 12" TOOL REST. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
Cast Iron Legs for Stand Delta Rockwell Milwaukee 12" Wood Lathe Model 1460
SET OF CAST IRON LEGS FROM A DELTA ROCKWELL MILWAUKEE MODEL 1460(46-305) 12" WOOD LATHE. LEGS ARE PART NUMBER DDL-187. CAT. NO. 945 THIS LISTING IS FOR THE TWO LEGS ONLY. THESE LEGS HAVE NO DAMAGE. CRACKS OR REPAIRS. THESE LEGS SHIP FREE TO THE LOWER 48 STATES ONLY. IF THE BUYER PICKS THEM UP IN AKRON. OHIO I WILL REFUND $50.00 AND THE BUYER CAN HAVE. FREE, THE TWO WOOD SHELF PIECES SHOWN IN THE PHOTOS. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
Delta Rockwell wood lathe step pully
Step Pully 3/4 bore I think this is from wood lathe It is Delta. Rockwell, Milwaukee
|
|
Delta Rockwell wood lathe tail stock wrench
Delta Rockwell Lathe tail stock wrench
|
|
Rockwell 46-111 Wood Lathe 3-Tool Rests, Support Base (Banjo), Bed Clamp DELTA
Some items from a Rockwell 46-111 Wood Lathe 4" Tool Rest 12" Tool Rest Offset Tool Rest Support Holder with Bed Clamp All in Great Working Condition!
|
|
ORIGINAL DRIVE BELT from a vintage Delta Milwaukee Rockwell 12" wood lathe
SHIPPING to USA only for the stated charge. No charge for pick up in Vista CA 92083 This auction is for the Delta lathe drive belt pictured below. The belt is 1/2" wide and 66 inches long. It's in very good condition with no apparent flaws. Thanks for looking!
|
|
Vintage Delta Rockwell Milwaukee model L 5" wood lathe tailstock
THIS AUCTION IS FOR A VINTAGE DELTA LATHE TAILSTOCK L 5
|
|
Delta Rockwell 46-200 Wood Lathe Headstock
Used headstock from a vintage Delta 46-200 12" wood lathe. Well used condition. The bearings feel good and smooth, see pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell 46-200 Wood Lathe Tailstock
Used tailstock from a vintage Delta 46-200 wood lathe. Well used condition. It does have a small crack on the tail end, see pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
Rockwell Delta 12" wood lathe compound cross slide, metal turning kit
Excellent condition metal turning package for Rockwell/Delta 12" wood lathes. This kit has been stored in a box high up on a shelf for decades. The pictures speak for themselves. This item is in amazing condition with only light chips to the original paint. This set up appears to have been used only very minimally. The machined surfaces and chrome knobs are immaculate. The only negative I have found is that the lantern tool post is missing its rocker shim. This package comes with the following items: Compound cross slide Tool post. Tool holder with boring bar( Williams no.81 boring) Three jaw chuck with two sets of jaws and wrench with the original box.
|
|
Vintage Delta Milwaukee Rockwell Lathe Banjo 1" Post
Used banjo from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
Rockwell Delta REEVES DRIVE MOUNTING BRACKET
MOUNTING BRACKET FOR REEVES DRIVE. FROM 12" WOOD LATHE.
|
|
Cast Iron Base for Delta Rockwell Unisaw or Heavy Duty Shaper
This auction is for a Cast Iron Base for Delta Rockwell Milwaukee Unisaw or Shaper. Part Number LSR 49. No extra holes. No cracks and very little rust.
|
|
Rockwell Delta variable speed REEVES DRIVE
VARIABLE SPEED REEVES DRIVE/PULLEY FROM 12" DELTA ROCKWELL WOOD LATHE.
|
|
Rockwell Delta Wood Lathe 3-Tool Rests, Banjo, Wrench 4" 12" Offset DDL-515
Up for auction is a lot of 3 tool rests a banjo and the wrench from a Rockwell lathe. The part numbers are DDL515. DDL12, DDL4, DDL310, DDL504. All of the items are in good used condition. If you have any questions feel free to ask. Thank you for looking and happy bidding. Posted with
|
|
2MT CENTER SET for vintage Delta Rockwell Milwaukee wood lathe
Shipping to USA only. No charge for pick up in Vista CA 92083 This auction is for the Delta Rockwell Milwaukee wood lathe centers as shown in the photos below. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-140a5a4a1a0-0xfd-
|
|
(2) Rockwell Delta variable speed wood lathe ( pair ) 46-450 12" x 36"
Delta Rockwell wood lathes 46-450 Have 2 variable speed wood lathes for sale. Both have 3ph motors. The first lathe( photos 1-4) is a complete machine. The second machine is missing some parts. Have a full shield to go with the units. Capacity 12" 36" between centers. No tool rest or tooling. Only what is pictured.
|
|
Vintage Delta Rockwell Milwaukee live center 2mt
SHIPPING to USA only. No charge for pick up in Vista CA 92083 This auction is for the Delta Rockwell Milwaukee live center shown below. It is a 2MT center. Bearing is smooth and tight, works great. It has a little bit of rust that would be easily removed. Thanks for looking!
|
|
Delta Rockwell Milwaukee (or maybe Walker Turner?) wood lathe 4" tool rest
Not sure about the brand. Does not look a lot like other Delta tool rests. Maybe Walker Turner. Number cast into the back is 3056-5. The shank is 1" diameter by 3¼" long.
|
|
Delta Rockwell Milwaukee Wood Lathe Outboard Inboard Faceplate 1" LH RH Threads
6" FACEPLATE FROM VINTAGE DELTA ROCKWELL LATHE. HAS BOTH LEFT HAND(LH) and RIGHT HAND(RH) 1" X 8 TPI THREADS. CAN BE USED IN BOTH THE OUT BOARD AND IN BOARD POSITIONS. THIS FACE PLATE IS IN EXCELLENT CONDITION.
|
|
BANJO TOOL REST HOLDER 46-111 Delta Rockwell Homecraft 14/11" Wood Lathe
TOOL REST HOLDER"BANJO" FROM A DELTA ROCKWELL HOMECRAFT MODEL 46-111 14/11" WOOD LATHE. FITS LATHES WITH 1 1/4" GAP BETWEEN WAYS. ACCEPTS 1" POSTS. THIS PART APPEARS TO HAVE ALL ORIGINAL PARTS WITH NO CRACKS OR REPAIRS. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 14/11" Wood Lathe Model Number 46-111 If you need any parts please message me. Using the"ask a question" function. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14143f8a549-0xfe-
|
|
Vintage Delta Rockwell Milwaukee machine WORK LAMP bandsaw, jigsaw, drill press.
The cord has a frayed spot or two and will need patching or replacement.
|
|
Outboard Tool Rest Stand for Delta Rockwell Milwaukee Homecraft Wood Lathe
VINTAGE DELTA ROCKWELL OUT BOARD TOOL REST. HEIGTH IS ADJUSTABLE SO THAT IT CAN BE USED ON MOST LATHES. EXCEPT FOR THE MINOR REPAIR TO THE TOP(SEE LAST TWO PHOTOS FOR UP CLOSE PHOTOS OF THE REPAIR) IT IS FREE OF DAMAGE. MAY BE PARTIALLY TAKEN APART FOR SHIPPING. SHIPS FREE TO LOWER 48 STATES ONLY. I DO HAVE AND WILL INCLUDE THE ORIGINAL T-BOLT THAT TIGHTENS THE TOOL POST INTO THE TOOL REST(IT IS NOT IN THE PICTURES)
|
|
Delta Rockwell Metal Lathe Main Apron Hand Wheel / Lathe Wheel - MCL 71
This auction is for a Delta Rockwell Metal Lathe Main Apron Hand Wheel/ Lathe Wheel- MCL 71. It is in fair used condition. Scratches throughout and coating lose. No cracks to metal. Handle cover is loose. Measures approx 5" Inside section is approx 1/4" This is AS IS! What you see is what you get! I aquired this from a local sale along with other woodworking machine parts that I will be listing over the next couple weeks. I require payment within 4 days of end of auction. I also require insurance to be paid by buyer on all standard post mail items reguardless of item cost. And all priority mail items over $50.00, or item will not be shipped. I ship to address provided by paypal, so if address differs, shipping cost will be affected. Please view my other auctions for more woodworking machine parts, and items. Feel free to email with ... morequestions or for more pics. Happy Bidding!
|
|
Vintage Delta Rockwell Milwaukee wood lathe motor, pulley, cord, plug, no switch
SHIPPING TO USA 48 STATES ONLY FOR THE STATED PRICE. Motor from a Delta lathe in great original condition. J-box tweaked but EZ fix. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14162fb4b67-0xfc-
|
|
Vintage Delta Rockwell Milwaukee wood lathe 3" faceplate with original wrench.
Delta 3" faceplate with original Delta wrench. 1" X 8 threads-per-inch mounting. Right-hand threads for inboard turning. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1416a2aa2c4-0xfb-
|
|
Vintage 24" TOOL REST #694 DDL 57 for Delta Rockwell Wood Lathe
Vintage Delta Model 694 DDL-57 24" Lathe Rest with 1" posts Very Good No Reserve You are bidding on the Vintage Delta Rockwell Lathe Rest shown in the photos. No other items are included. This is the extra long Model 694(part number DDL 57) Rest with two posts. It fits many Delta Rockwell lathes. Please do your own research before bidding. I think this is an older version becaue it has the model number cast in along with the part number. It has some surface rust on the unpainted areas and the paint could use some refreshing. No deep pitting, No cast iron cracks, No major gunk or grime. This lathe rest can be cleaned up and painted in short order if you have a wire wheel on your drill or grinder. Or skotch-brite pads. I'm saving my time and your bid money by selling it without that effort. GUARANTEE- This item is guaranteed to ... morebe in the condition stated above on arrival. IF that is not found to be the case. You may return the complete item, shipped within 14 calendar days of receipt, for a full refund of the bid price. NO partial returns. NO refund of two way shipping costs. No refund if returned after 14 days. Your bid price will be promptly refunded after it arrives back with no shipping damage. Shipping damage(in either direction) will be handled through an insurance claim. You are responsible for return-shipping insurance if you choose to return the item. The Fine Print- Read BEFORE bidding. By placing a bid. You agree with all written below: The winning U.S. bidder pays the bid price + $ 16.00 shipping cost. Your payment must arrive within 7 Calendar days of auction end and must be made by PayPal. Ebay no longer allows other payment methods for items that will be shipped. Sorry. This item may also be picked up locally with no shipping or handling charge by the winning bidder at a mutually convenient time, but in that case payment cannot be by PayPal because of their online delivery confirmation requirement. You must ask for payment terms before bidding if you plan on picking up locally. Items th
|
|
Delta Rockwell 6" Jointer Motor Pulley 3 1/2"
Used motor pulley from a vintage Delta Rockwell 6" jointer. 3/4" bore. 3 1/2" dia. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
Vintage Delta Rockwell Milwaukee lathe wrench #942 for banjo or tailstock
Delta tailstock or banjo wrench. Number cast into the back is CAT.942.
|
|
Delta Rockwell Stand Flared Foot 50-329 band table saw drill sander
Delta Steel Stand flared foot bolt together construction 29" legs- top is 12 1/2" x 7" 15 proper bugle bolts nuts and star washers catalog# 50-329 or# 329 proper stand for Delta band saw 10" and table saw 8" may fit others no cracks chips repairs or damage mounting holes in legs feet and tables added by previous owners buyer may wish to clean and/ or repaint to taste shipping is for lower USA CONUS only other locations please ask- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders ... morewill do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever honest answers I can. Purchase price refunds/ returns are accepted in the event I have expre
|
|
BANJO TOOL REST HOLDER Delta Rockwell Homecraft Wood Lathe DDL 171
Banjo tool rest holder handle moves easily good cond.
|
|
Delta Rockwell Milwaukee Industrial Leg Lathe Base - Nice
The item featured is the item you are bidding on and will receive. Bidding will begin at $ 300.00. This item is for pick up only in Southbury. CT. All items shipped exclusively to the C ontinental United States ONLY PAYPAL IS ACCEPTED You are bidding on: ONE(1) ANTIQUE DELTA ROCKWELL MILWAUKEE INDUSTRIAL LEG LATHE BASE SEE PHOTOS FOR DETAILS Up for auction is an antique Delta Rockwell Milwaukee Industrial leg lathe base. It appears to be in nice condition. It is approximately 32" high and about 56" long. It is for pick up only at my consignor's in Southbury. Connecticut. This auction item was brought to me by my consignor. I do not know all the details about the items he brings me. But I do my best based on the information he tells me and what I can research on my own. If you have any questions, please ask BEFORE YOU BID and ... moreI will be more than happy to contact my consignor for the answer- so bear with me. ONLY SERIOUS BIDDERS PLEASE. Thank you. If you have any questions. Please feel free to ask and I will do my best to answer them. Thank you. Good luck and happy bidding! Sold as is. You determine the value from the pictures. Payment expected within 5 days from the end of the auction unless prior arrangements are made before the auction ends. I discount shipping for multiple items won. This item does not ship outside the United States. Paypal is the only acceptable form of payment.
|
|
(2) ROCKWELL-DELTA 46-525 12" x 36" WOOD LATHE WITH GUARDS! ~ THREE PHASE
USED(2) ROCKWELL-DELTA 46-525 12" x 36" WOOD LATHE WITH GUARDS! ~ THREE PHASE These lathes came out of a local wood shop education center that was shut down. Both units were working well when removed. The hinge on one of the cabinet doors is broken. These units have been in storage and may need tightening or miscellaneous nut and bolt hardware replacement. They come exactly as shown. Items are sold AS-IS NO WARRANTY. Free pickup or Buyer is responsible for all shipping costs. Shipping Dimensions: ~ 48x58x52" Tall/ 700#
|
|
Delta-Rockwell 12" x 36" Wood Lathe - With Gap - Variable Speed - Single Phase
We are offering a Used Delta Rockwell 12" x 36" Wood Lathe. With removable gap, Single phase variable speed drive, tool rest, small face plate, As per photos. No charge to load, Reasonable shipping may be available into parts of Nevada and California. Please email your questions. Thanks for Looking!
|
|
Rockwell Delta International 4 Speed Wood Lathe Model 46-111 Cabinet Tail Stock!
Rockwell Delta International 4 Speed Wood Lathe Model 46-111 Cabinet Tail Stock! Today we are offering this ROCKWELL International 4 Speed Wood Lathe. 42 1/2" tall(with equipment) 30" table alone. 55 1/2" side to side by 16 3/4" front to back. Working condition! Model 46-111, Serial L08502. Add this to your shop today! Did not plug in to see if works! View more auctions from Wehavituneedit! A buyer is strongly encouraged to fully review the item details and ask questions before you bid or buy. Please contact us through eBay or call at 217-779-3992. We do our very best to describe the item being sold. Our store is located 10 minutes south of Quincy. Illinois. Freight items are shipped with FedEx freight. So please send us your zip code and type of location(home, business, loading dock, etc. and we will send you a quote. ... moreYou may also make your own freight arrangements, but we will charge a fee to box or palletize if necessary. We do not ship freight items outside the continental United States. Payment Please send your Paypal payment within twenty-four hours of being invoiced. Tax Illinois state sales tax is 6.25% and will be charged if a buyer picks up and pays for an item at our location. Contact us]View other listings] Another auction from WehaveitUneedit! Powered by
|
|
Rockwell 3" Lathe Face Plate DDL 180 Delta Wood Lathe 46-450 1970's Vintage Tool
Vintage 1970's era Rockwell 3" Lathe Face Plate Marked DDL 180. From Delta Wood lathe 46-450 Three holes for mounting. See photos. Original finish. Barely used. Posted with
|
|
DELTA ROCKWELL Wood Lathe # 5792
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! DELTA ROCKWELL Wood Lathe# 5792 Item Description: This is a DELTA ROCKWELL Wood Lathe. Serial# 5792. Bed approx 46" Approximate dimensions: 58"W x 47"H x 10"D The items in this auction were ... moreremoved from a working environment prior to storage. But were not tested at inspection. NOTE: No loading dock. Forklift or District Personnel available for assistance at this school location. All Buyers must remove their items and be off of School premises by 1:50 p.m. on pick up days. No exceptions. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Ojai. CA, 93023 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 37655) nbsp, nbsp, Model: 5792, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Size: 58"W x 47"H x 10"D, nbsp, nbsp, Condition: This item is used and sold as-is. This item w
|
|
Delta Rockwell 12" Wood Lathe, Stand Planks.
Used vintage original stand planks from a vintage Delta 12" wood lathe. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell 12" Wood Lathe, Cast Iron Leg Set. DDL 187
Used cast iron leg set from a vintage Delta 12" wood lathe. Great condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell Wood Lathe, Drill Chuck 5/8" Jacobs
Used Jacob 5/8" drill chuck from a vintage Delta 12" wood lathe. M-2 Taper. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell Wood Lathe, Centers Spur & Live
Used spur drive. live tail centers from a vintage Delta 12" wood lathe. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell 12" Wood Lathe, Tailstock CBL 402 & CBL 403
Used tailstock from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell Wood Lathe, Toolrest 4" DDL 4
Used 4" tool rest from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
Delta Rockwell 12" Wood Lathe Headstock Cover
Used headstock cover from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143bb668805-0x106-
|
|
Delta Rockwell 46-140 46-146 16" woodworking lathe center bed extension assembl
16 inch lathe bed extension for a Rockwell Delta 46-140 woodworking lathe. Stamped 425-99-006-0003 I believe is also known as center bed section 46-146. May fit other models but that is what it came from. A hard to find accessory for the 46-140 lathe. Is used with signs of prior rust and grime/use. Overall in decent shape. There is a Beaver lathe that is apparently the same but I'm unsure of model. Comes with connecting bolts for one end which I assume are original. Nice addition for your lathe. See my other auctions for related part. Also have the 46-140 this came from for local pickup if interested. Please e-mail with questions or for additional photos. Winning bidder pays $16 shipping.
|
|
Three inch faceplate for Delta Rockwell Milwaukee wood lathe
Shipping to USA 48 states only. No charge for pick up in Vista CA 92083 This auction is for the Delta Rockwell Milwaukee Three inch faceplate shown in the photos below. Thanks for looking!
|
|
Delta-Rockwell Wood Lathe - Guard - Variable Speed - 3 Phase - 1HP
USED Delta-Rockwell Wood Lathe- Guard- Variable Speed- 3 Phase- 1HP I believe that this is a Model 46-400. ID Tag states Serial#121-7108 I will place on a Pallet. Buyer responsible for free pickup or all freight related charges. Shipping dimensions are approx. 24x60x52" Tall and approx. 450#
|
|
DELTA ROCKWELL HOMECRAFT WOOD / METAL LATHE 46-230
Delta Rockwell Homecraft Wood/ Metal Lathe 11 inch lathe part number 46-230 Manufactured Sept. 1954 in Missippi Single phase 1/4 hp motor@ 1725 RPM w/ a four speed pully system In Great shape/ In working condition Many Accessories. 2 original manuals This was used by a home hobbiest not a shop Look at pictures for they are part of my description Ask questions at or 815-735-9125 This is a PICK-UP ONLY no shipping located in north central Illinois(50 miles s/w of chicago) a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14419ca2522-0xf5-
|
|
Delta Rockwell Wood Lathe Cabinet, Door Latch Handle
Used latch handle from a vintage Delta wood lathe cabinet. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1442ed9a8a5-0xfd-
|
|
DELTA ROCKWELL WOOD LATHE ACCESSORY CLAMP - FITS A 1 1/2" GAP
I will gladly ship multiple items together as long as it is safe to do so.
|
|