|
Vintage Craftsman wood lathe main frame or bed or "ways"
SHIPPING to USA 48 states only. No charge for pick up in Vista CA 92083 This auction is for the vintage Craftsman wood lathe bed pictured. The following photo is for reference only to show the type of lathe this bed came from. Thanks for looking!
|
|
|
113228162 Craftsman 12" wood-turning lathe w/ tools table mounted
P.O. Box 215 55 Oriskany Blvd Yorkville. NY 13495 113228162 Craftsman 12" wood-turning lathe w/ tools table mounted, CRAFTSMAN WOOD LATHE Model# 113228162 Description: 113228162 Craftsman 12" wood-turning lathe w/ tools table mounted. Manual available for download Condition: Used but ready to go. Please see all photos. Shipping: This is a PICK UP ONLY listing located in Clinton. New York 13323. Do NOT lose out! Payment: We accept PayPal. Payment must be received within 3 days of the end of the auction[unless prior arrangements have been made] If not. We will file a dispute against the bidder and re-list the item on eBay. For an eBay Motors sale. We require a $500 deposit within 48 Hours and the balance paid within 7 days[unless prior arrangements have been made] We do not collect sales tax on eBay motor sales vehicles. That is done ... moreby the state it is registered in. What's it Worth? 55 Oriskany Blvd P.O. Box 215 Yorkville. New York 13413 315-768-2777 Hours M-F 10-5[est] CLOSED Saturday& Sunday All items shipped or picked up within New York State will be charged your NYS local sales tax rate at the time of checkout. Our local rate is 8.75% If the buyer can provide us with a completed sales tax-exempt form. Then sales tax will not be charged Shipping: Your item(s) will be shipped within 2 business days of receiving payment. A confirmation e-mail. With tracking information. Will be sent to you when the item has been shipped. If you do not receive one, please contact us. see above) Any flat rate shipping is for the lower 48 states only. If your"ship to" address is in other US States or Provinces. Please contact us for alternative shipping options. All International Bidders Please Read Prior to Bidding. Please be aware that you are responsible for any taxes/tariffs/customs fees your government may levy on your purchase. We declare the amount the item sold for as its value on all customs forms and we will not say it is a gift. We will only ship using USPS Priority Mail International. We have
|
|
|
Craftsman Lathe - # L2-5 Tail Stock 9 1/2" Swing - Vintage / AP39
Hello folks. Craftsman 9 1/2"swing, marked L2-5, comes with bed- clamp parts; nice tool no damages. Fits rails spaced 1 3/4" apart. Check out our Ebay store for other great bargains. I will gladly combine shipping on multiple purchases to save you on shipping costs. As always. Don't hesitate to email us with questions. Please know that if you have not emailed us, and payment has not been made in seven days then we do turn over all unpaid items to Ebay for collection, and for credit of all fees charged to us by Ebay. Note To Buyers: Our shipping Department will be closed From September 5th- September 17th for Vacation. Only items bought and paid for on or before September 4th will be processed and mailed by Wednesday September 5th; all other items purchased and paid for after September 4th will not be mailed until the shipping ... moredepartment reopens on September 18th. We will still have access to our Ebay Messages. So if you have questions we will do our best to answer them during this time.
|
|
|
Antique Industrial Cast Iron Wood Working Craftsman Turning LATHE Machine
ANTIQUE WOOD TURNING LATHE MACHINE We are offering for sale an antique cast iron wood working lathe machine/ piece. Wheel turns free and smooth. Came from an old abandoned farm here in Central Pa. Exact age and origin unknown but believe to be from the mid to late 1800s. INDUSTRIAL MACHINE AGE CAST IRON CRAFTSMAN LATHE TOOL Please check out our other antique lathe pieces from the same estate. Thanks for looking. SIZE: Approx weight 43 pounds CONDITION: Overall good used condition. Selling as found. See photos for condition and details. SHIPPING: Buyer to pay $35 shipping/handling/insurance in the continental U.S. Be sure to add me to your! SHIPPING PLEASE BE SURE TO CHECK ON SHIPPING PRICES BEFORE YOU BID OR BUY SHIPPING IS NOT FREE WE WELCOME PICKUPS! Item is located in Duncannon Pennsylvania 17020 Storage is FREE up to 6 months and longer ... morewith prior approval Buyer responsible for paying the shippers directly for all shipping costs incurred. Delivery time will vary depending on shipper. Please be patient. We would be happy to work with a shipping company of buyer's choice. We work with multiple furniture shipping companies to obtain the most reasonable shipping quotes for the buyer. We can offer guaranteed shipping quote to most areas in the continental US. Email your zip code for a shipping quote All shipping options are only suggestions. And you are more than welcome to use any shipper of your choice or pick up from our location for FREE. We offer shipping arrangement quotes as a convenience to our buyers and are happy to work with a shipping company of buyer's choice. Shipping ultimately is the buyers responsibility to arrange. Buyer responsible for paying the shippers directly for all shipping costs incurred. Please understand that all shipping is third party and we cannot be responsible for delays and things beyond our control. We do everything possible to ensure prompt delivery but certain circumstances such as weather. Scheduling and traffic can delay the shippers schedule.
|
|
|
Vintage Craftsman wood lathe 7/8" chisel or gouge made in USA
UP FOR SALE IS A Vintage Craftsman wood lathe 7/8" chisel or gouge made in USA SEE PHOTOS FOR CONDITION THANKS& GOD BLESS
|
|
|
VERY GOOD CONDITION VINTAGE CRAFTSMAN (101.06242) BENCH TOP LATHE V
CRAFTSMAN 101.06242 BENCH TOP LATHE Bench Top Model 2 HP Motor 3 Speed via step pulley system 36" Between Centers 8" Max. diameter of part Includes: Tail Stock and Steady Rest Machine Dimensions: 45" length x 8" wide x 12" Height Machine with base: 57" x 24" x 50" Region: Southeast Voltage: 110/60/1 phase Condition: Cleaned and Checked This machine is an extremely rare find especially in this condition. A perfect addition to any small shop or for the garage woodworking hobbyist. Email dan@globalmachineryco.com for a freight quote. Any additional questions contact Dan at 704-771-0479. We offer no warranty on the sale of used machinery. Goods are sold as is, where is, but we do guarantee all of our equipment to be operational an functional upon delivery.
|
|
|
Craftsman 4-in Wood lathe Wood Turning Faceplate
THIS AUCTION OFFERS A CRAFTSMAN 4-in. WOOD TURNING FACE PLATE FOR A WOOD LATHE. IT IS FOR USE WITH CRAFTSMAN MORSE TAPER No. 2(MT#2) WOOD LATHES. IT FITS ALL 1 X 8 TPI THREADED SPINDLES IT HAS 4 SCREW SLOTS. 5/16-in. WIDE X 3/4-in. LONG IT IS MACHINED CAST IRON PLEASE CONTACT US WITH ANY QUESTIONS. THANKS FOR LOOKING. GOOD LUCK BIDDING.
|
|
|
Compound Rest & Swivel 5"Lg from 7" Sears Craftsman Metal Lathe Model #109-20630
This auction is for the rest or tool post holder as pictured.It is from a Vintage model 109-20630 Sears Craftsman 7" Metal Lathe. Overall a bit over 5" Long. Has some wear but good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical.
|
|
|
2 Calipers @ 7" and 6" rule from 7" Sears Craftsman Metal Lathe Model #109-20630
This auction is for the 2 unmarked calipers and the General 6" rule as pictured. Local Pick-up available. I will combine shipping on multiple purchases when practical.
|
|
|
Atlas Craftsman Dunlop 6" 109 Metal Lathe
This is a fully restored Craftsman 6" 109 metal lathe. Model# 106-2063. This lathe comes with a new 4 jaw scroll chuck, drill chuck, live center and a dayton 1/3 hp.1725 rpm motor, a custom 1/4" aluminum tool holder and bits. Several HS and carbide bits, I forgot to add in the pictures, sorry. Note: No returns Thanks for looking!
|
|
|
Craftsman Sears Model 109 6" Metal Lathe Forward / Reverse Tumbler Lever Atlas
The following auction is for a Craftsman Sears Model 109 6" Metal Lathe Forward/ Reverse Tumbler Lever Atlas 109.21270 It is in nice used condition. Works great. It does not include any gears. It is o ff of a Craftsman Model 109. 21270 Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6. 8 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
|
|
|
DELTA CRAFTSMAN OTHERS WOOD LATHE TOOL REST
NO KNOWN MFT. QUITE OLD(BABBIT SPINDLE) SPECS. TOOL REST 10" LONG 13/16" DIA. PIN X 2 3/8 LONG MOUNT BAR"YELLOW" TAPE 3 1/2 TALL 9" LONG"TEE" SLOT FOR BOLT + PLATE WAS DESIGNED TO FIT THRU BED.+ BOLT NUT DRAWN UP WITH TAPERED"WEDGE SLIDE" FOR LOCKING TOP PLATE"VEES" FOR BEDWAYS ON LATHE IT WAS USED ON. NICE CLEVER SET-UP MODIFY TO SUIT. 4 1/2 CAPACITY BED THICKNESS WITH PRESENT SET-UP. NEEDS CLEAN NO DAMAGE WILL SHIP ANY OR ALL PARTS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13ee95f9124-0xee-
|
|
|
5 3/8" FACEPLATE 1" X 10 TPI 6" ATLAS CRAFTSMAN SOUTH BEND MK 2 LATHE
5 3/8" FACEPLATE 1" X 10 TPI ATLAS CRAFTSMAN SOUTH BEND MK 2 LATHE EXCELLENT CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. PLEASE VISIT MY NEW EBAY STORE IF YOU DON'T SEE WHAT YOUR LOOKING FOR LISTED PLEASE ASK IF I HAVE IT. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID ... moreWITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW E BAY STORE FOR OTHER LISTINGS
|
|
|
Sears Craftsman 12" Wood Lathe Headstock Casting
Welcome All* Up for auction is a nice used condition 12" Sears Craftsman wood lathe headstock casting. It has a 57mm hole with a 1/2" keyway to mount to the tube. It has a 47mm hole for the spindle bearings. It is a part number 804188. I charge actual shipping charges. But Ebay doesn't have that option on their listing page. To avoid problems with Ebay's system, please wait for me to email you. I will email the high bidder within 24 hours after auction ends. I pack well and I ship priority mail, or USPS Parcel Post. I answer all emails.
|
|
|
Wood Lathe Banjo and Clamp Rockwell, Delta, Craftsman Vintage Woodworking
Wood Lathe Banjo and Clamp Rockwell. Delta, Craftsman Vintage Woodworking. I DO NOT KNOW THE BRAND OR MODEL NUMBER FOR THE LATHE IT CAME OFF OF. 5/8" TOOL REST HOLE- 2 1/4" BED GAP.
|
|
|
Vintage Craftsman 12 Inch Wood Lathe with 1/2 HP Motor, Tools and Manual
Ready to used vintage Craftsman 12 inch wood lathe. Includes 1/2 HP motor. Tools, manual and mounting hardware. The bench is not included. Lathe was tested and is in good working condition with light rust. Same day shipping using recycled packing materials. If you have any questions contact me. Thanks for looking.
|
|
|
Sears Craftsman Wood Lathe Face Plate # 92489, 4" Diameter, Cast Iron, 3/4" Thd
Sears Craftsman Wood Lathe Face Plate# 92489. It is 4" Diameter. And Cast iron. It is new from what we can tell and was part of my father in laws estate. The original box a manual is included and fits 3/4" threaded spindles. We are also including what looks like a dead center for a tailstock. Not sure on this one. Count it as a bonus. Please note we are not"newbie’s" to eBay. This account was started to get our personal listings out of our business eBay account. Which has over 5000 positive feedback. bluewaterareaauctions) Please be assured this listing is by eBay professionals with many years of satisfied customers. Shipping and handling costs for this listing will be $6.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. We will ship ... morepromptly and will do all we can to make sure you are satisfied with your purchase. Thank you! 0613GTC)
|
|
|
Vintage Sears Craftsman or Dunlap wood lathe tailstock
SHIPPING to USA states only. No charge for pick up in Vista CA 92083 This auction is for the vintage Craftsman wood lathe tailstock pictured. The following photo is for reference only to show the type of lathe this tailstock came from. Thanks for looking!
|
|
|
CRAFTSMAN WOOD METAL LATHE OTHERS FACEPLATE DRIVER 3/4-16 1-8
ORIGINALLY FROM CRAFTSMAN WOOD LATHE OR METAL THREAD PER 3/4-16 THREAD 5 3/8 OUTSIDE DIA. BOSS DIA. ON BACK IS 1 7/16- COULD BE OPENED UP 1"8 OR? TO SUIT THE 3/4-16 THREAD IS DECENT MINOR DIA. GOES TO.695 BUT SPINS ON + FACE RUNS TRUE. CAST IRON O/A THREAD THICK 15/16" f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-14038c1fe31-0x100-
|
|
|
VINTAGE SEARS CRAFTSMAN ATLAS 109 20630 LATHE METAL WOOD MINIATURE MINI NO RES
VINTAGE SEARS CRAFTSMAN ATLAS 109 20630 LATHE METAL WOOD MINIATURE MINI NO RES UP FOR AUCTION IS A VINTAGE SEARS LATHE. FROM WHAT WE ARE TOLD THEY MAY HAVE BEEN MADE BY ATLAS. PLEASE NOTE I DO NOT HAVE ANY EXPERIENCE WITH THIS TYPE OF FEILD. SO, ITS BEING SOLD AS IT. HERES WHAT I DO KNOW. EVERYTHING LOOKS GOOD ON THE UNIT. ALL THE GEARS ECT TURN AND EVERYTHING SEEMS TO BE AS IT SHOULD. THE ONLY THING I NOTICED IS THAT THE TURNING WHEEL HANDLE NEEDS TO BE REPLACED. BUT OTHER THAN THAT EVERYTHING LOOKS GOOD. ITS ACTUALLY REALLY GOOD COSMETICS FOR IT AGE TOO. PLEASE ASK QUESTIONS IF YOU HAVE ANY, I WILL TRY AND ANSWER AS BEST AS I CAN. WE TOOK SEVERAL PHOTOS FOR YOUR CONSIDERATION. SINCE WE DONT KNOW MUCH ABOUT IT WE ARE GIVING EVERYONE A CHANCE TO OWN AND OFFERING IT AS A NO RESERVE AUCTION BIDDING STARTS@ $9.99 Have Fun and Happy Bidding WE ... moreARE A NO NON SENSE AUCTION HOUSE WHAT YOU SEE IS WHAT YOU GET WITH FAST SHIPPING! ~ no hidden chargers no hidden fees ~ ~ NEW TO EBAY ~ BIDDERS WITH 10 OR LESS FEEDBACK! MUST CONTACT US FIRST BEFORE YOU BID! BIDDERS WITH FEEDBACK OF 10 OR LESS YOU MUST CONTACT US FIRST BEFORE YOU PLACE A BID OR YOUR BID WILL BE CANCLED. WE HAVE HAD A HUGE INCREASE IN BIDDERS WITH LOW FEEDBACK NOT PAYING OR COMMUNICATING! REMEMBER WE DO FILE NBPS FOR ALL NON-PAYMENT BIDDERS.A FEW BAD APPLES HAS NOW MADE THIS STANDARD. PAYMENT DETAILS: We prefer Paypal Its Fast and Easy to Use Other payment options are available please contact us for more options. SHIPPING DETAILS: Super Fast Shipping! All items usually ship within 24 hrs of auction end. Mon-Fri) We use FedEx/UPS and USPS as our carriers. For Freight items please email for shipping quotes. We never charge for packaging labor or materials. Please be aware that we do not ship on weekends or holidays. LARGER ITEMS CAN BE EXPECTED TO TAKE MORE TIME! INTERNATIONAL SHIPPING DETIALS: We do our best to accommodate our international bidders. NO MATTER WHAT THE SHIPPING CALCUALTOR SAYS CONTACT US FOR A SHIPPING QUOTE TO BE SURE! YOU
|
|
|
Vintage Craftsman wood lathe chisel Parting lathe tool 9-28524 USA
Vintage Craftsman 9 28524 wood lathe chisel. This tool I believe is called a parting tool(I am not a wood worker. So I apologize if I do not have the correct name, so be sure to check out the photos& feel free to ask if you need more info) Chisel measures 15" in total length and is marked Craftsman Made in USA High Speed Steel 9 28524. Be sure to check out my other listings as I am always willing to combine items when possible.
|
|
|
Vintage Craftsman wood lathe chisel Diamond Parting lathe tool 9-28526 USA
Vintage Craftsman 9 28526 wood lathe chisel. This tool I believe is called a diamond parting tool(I am not a wood worker. So I apologize if I do not have the correct name, so be sure to check out the photos& feel free to ask if you need more info) Chisel measures 14 1/2" in total length and is marked Craftsman Made in USA High Speed Steel 9 28526. Be sure to check out my other listings as I am always willing to combine items when possible.
|
|
|
Vintage Craftsman wood lathe chisel lathe round tip tool 9-285225 USA
Vintage Craftsman 9 28525 wood lathe chisel. This tool I believe is called a round tip tool(I am not a wood worker. So I apologize if I do not have the correct name, so be sure to check out the photos& feel free to ask if you need more info) Chisel measures 14 3/4" in total length and is marked Craftsman Made in USA High Speed Steel 9 28525. Be sure to check out my other listings as I am always willing to combine items when possible.
|
|
|
Vintage Craftsman wood lathe chisel Beveled Edge 1/2" lathe tool 9-28527 USA
Vintage Craftsman 9 28527 wood lathe chisel. This tool I believe is called a 1/2" parting beveled edge tool(I am not a wood worker. So I apologize if I do not have the correct name, so be sure to check out the photos& feel free to ask if you need more info) Chisel measures 14 1/2" in total length and is marked Craftsman Made in USA High Speed Steel 9 28527. Please note last photo shows slight knick in blade edge, probably could be sharpend out. Be sure to check out my other listings as I am always willing to combine items when possible.
|
|
|
Vintage Craftsman wood lathe chisel 3/8" gouge lathe tool 9-28521 USA
Vintage Craftsman 9 28521 wood lathe chisel. This tool I believe is called a 3/8" gouge tool(I am not a wood worker. So I apologize if I do not have the correct name, so be sure to check out the photos& feel free to ask if you need more info) Chisel measures 14 1/4" in total length and is marked Craftsman Made in USA High Speed Steel 9 28521. Be sure to check out my other listings as I am always willing to combine items when possible. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-140a5a4a1c5-0x102-
|
|
|
Craftsman Wood Lathe Live & Screw Centers
Used live. And screw centers from a vintage Craftsman wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
Craftsman Wood Lathe Faceplate 3" W/Screw Center
Used 3" face plate from a vintage Craftsman wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
Craftsman Wood Lathe Motor Mount & Pulleys.
Used motor mount and pulleys from a vintage Craftsman wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
Craftsman Wood Lathe Faceplate 5 3/8"
Used 5 3/8" face plate from a vintage Craftsman lathe. Bore is 3/4" 16tpi. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please. Posted with
|
|
|
Craftsman Wood Lathe Toolrest 12"
Used 12" toolrest from a vintage Craftsman wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140ef946d99-0x106-
|
|
|
Vintage Craftsman wood lathe tool rest holder or banjo
Vintage Craftsman wood lathe tool rest holder or banjo. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141233d9523-0x106-
|
|
|
MT2 SPUR CENTER WOOD TURNING TOOL FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Very Nice- Spur center with removable center point. Face diameter is 1 1/8" MT2 shank is 3 1/16" long. Set screw is present and in good order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1419c78b1ab-0xf6-
|
|
|
Operator’s Manual Craftsman Variable Speed Wood Lathe model 351.217170
This is the operator’s manual for a Craftsman Variable Speed Wood Lathe. Model 351.217170. It is in good condition with a date written in pencil on front and a few age spots. On the bottom of the front cover is a date 11/30/98. The instructions are in both English and Spanish. Please read the item description and email any questions you might have. We do not accept returns unless we have inaccurately described the item. We are not experts in everything but do our best to describe the item and make note of any flaw we might find. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CRAFTSMAN 12" x 37" WOODWORKING LATHE - #113.228360
aims CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST � Made by Craftsman. This is a used Woodworking Lathe in working condition. Model# 113.228360 Serial# 88056P0856 Specifications: Swing: Swing Over Bed: 12" Capacities: Distance from Floor to Center: 40-1/2" Distance Between Centers: 37" Spindle: Spindle Speeds(4) 875/ 1.350/ 2,250/ 3,450 rpm Spindle Thread: 3/4"16 tpi. Tailstock: Spindle Diameter: 3/4" Spindle Travel: 1" Bed: Bed Width: 2-1/4" Bed Length: 41-1/4" General: Electrical: 120 Volt. Single Phase, 7.2 Amps, 60 Hz Overall Dimensions: 52" x 33" x 43" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other ... morequestions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 CRAFTSMAN 12" x 37" WOODWORKING LATHE- 113.228360 Reliable Tool Inc. c 2011 | Powered by
|
|
|
CRAFTSMAN WOOD LATHE 103.21600 WITH MOTOR LOCAL PICKUP ONLY MIDDLEPORT NY
CRAFTSMAN SEARS AND ROEBUCK LATHE MODEL 103.21600 WITH SUNLIGHT MOTORS MOTOR S-3258 1/4HP 110VOLT 5AMP 1750RPM WORKS GREAT MOTOR IS REAL QUIET HAS SWITCH HOOKED TO POWER CORD COULD PROBABLY USE A NEW BELT. SET IT ON YOUR BENCH SCREW IT DOWN AND YOUR READY TO WORK. LOCAL PICKUP ONLY MIDDLEPORT NY 20 MIN FROM LOCKPORT.
|
|
|
Craftsman - 22560 - 6 1/2" Wood Lathe 4 Jaw Chuck - Nice!
As shown in very good condition. Thanks for looking! Posted with
|
|
|
Vintage Craftsman High Speed wood Lathe chisels 28528 set of 7 USED
This is a set of 7 Vintage Craftsman High Speed wood Lathe chisels Gouges Turning They have been used for many years so they are not knew good as new perfect or pristine. They are used. They are all from the same set but only 4 of them still have some of the manufacturer information left on them. 1 of them is missing the steel collar a couple of them have cracks/chips in the in the handles. Please see pictures for a better description of condition than I could write. Measuring devices are not included in this sale. I have an ebay store with many vintage Items please feel free to take look to see what else I have avalible and I will combine shipping you can contact me for a shipping quote or purchase you items at the same time and I will reimburse you any overpayment on shipping threw Pay-pall promptly. I do use USPS flat rate box’s when possible. ... morePlease note that eBay and pay-pall charge commission on shipping charges. Local pickup in Sacramento CA is free. Items must be picked up within three days of purchase. Please pay for item and contact me to arrange to pickup after item is picked up within three days you will receive a refund on shipping. If Item is not picked up within three days it will be shipped to you and you will not get a refund on shipping. I ship quickly within 24 hrs of payment excluding Saturday afternoon. Sundays and Holidays. I only except Pay-Pall for payment items must be paid for within two(2) days of close of auction/Sale. Buy it now items normally require payment at time of purchase. I am signed up for ebay unpaid item assistance which starts automatically if items are not paid for with in time allotted.
|
|
|
Craftsman Wood Lathe No. 149.23871 Tool Rest Banjo
Craftsman Wood Lathe No. 149.23871 Tool Rest Banjo Includes a Hold Down Aluminum Post Tightener could be home made Shipping& Handling: FREE(within lower U.S. 48) If you have a preference for shipping. Please contact. Thanks for Looking. International Buyers: Please Note that Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
|
|
|
Craftsman Wood Lathe No. 149.23871 Head Stock
Craftsman Wood Lathe No. 149.23871 Head Stock Needs Cleaning Overall Good Condition 2 Hold downs– One needs bolt Shipping& Handling: FREE(within lower U.S. 48) If you have a preference for shipping. Please contact. Thanks for Looking. International Buyers: Please Note that Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
|
|
|
Craftsman Wood Lathe No. 149.23871 Tail Stock
Craftsman Wood Lathe No. 149.23871 Tail Stock Aluminum tightening knob could be homemade Could use Cleaning Good Condition Shipping& Handling: FREE(within lower U.S. 48) If you have a preference for shipping. Please contact. Thanks for Looking. International Buyers: Please Note that Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
|
|
|
12" Wood Craftsman Lathe with working motor / Model#113-228160 / 113-249070
12" Craftsman Wood Lathe Dimension of the board that the lathe is on: 5' long x 2' wide There are 2 model#s: 113-228160/ 113-249070 There are 2 serial#s: 3314.P1104/ 3312.P0813 The motor works! Mfg# 11837. Model# 113-1289, HP 1/2B, RPM 1725, HZ 60 Please see all of the pictures for more information. Pick up only! Midway Industrial Sales. Inc. 401 St. Joseph Street Sturgis. MI 49091
|
|
|
SEARS CRAFTSMAN 12" X 38" POWER WOOD TURNING LATHE
THIS IS A USED SERAS CRAFTSMAN 12" X 38" WOOD TURNING LATHE. IT IS IN GOOD WORKING CONDITION. IT HAS A 2-1/4" STEEL TUBE. A 10 PIECE TOOL SET. MOTOR, EXTRA TOOL REST, A FACE PLATE AND CALIPERS ARE INCLUDED. THIS ITEM IS FOR LOCAL PICK UP IN LOVES PARK. ILLINOIS ONLY.
|
|
|
Late Model Craftsman Wood Turning Lathe w Extras & Manual & Bench #113.12540
Late Model Craftsman Wood Turning Lathe w Extras& Manual& Bench#113.12540 Fresh from an estate. This lathe was always properly maintained and only lightly used. It will provide many years of service. Sears Craftsman 12-inch Wood-Turning Lathe Model No. 113.23800. Pick up in Wilmington Delaware 19804
|
|
|
MT1 SPUR CENTER WOOD TURNING TOOL ATLAS CRAFTSMAN SOUTH BEND LATHE
MT1 SPUR CENTER WOOD TURNING TOOL APPEARS UNUSED. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ORIGINAL 12" Atlas Craftsman lathe CAST IRON LEGS AND WOOD
This listing is for an original 12" Atlas Craftsman lathe stand. The wood is original and in great shape. It measures 57' long to accept the long beds. Local pick up only. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Craftsman 929844 Lathe Headstock MT2 Spur Center
Craftsman 929844 Lathe Headstock MT2 Spur Center For use with Craftsman Morse Taper No. 2 Possibly Unused– In Box Very Light Rust Staining in a couple of spots Shipping& Handling: FREE(within lower U.S. 48) If you have a preference for shipping. Please contact. Thanks for Looking. International Buyers: Please Note that Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
|
|
|
Late Model 12" Craftsman Wood Turning Lathe w Extras Manual & Bench 113.12540
Late Model 12" Craftsman Wood Turning Lathe w Extras& Manual& Bench#113.12540 Fresh from an estate. This lathe was always properly maintained and only lightly used. It will provide many years of service. Sears Craftsman 12-inch Wood-Turning Lathe Model No. 113.23800. Pick up in Wilmington Delaware 19804
|
|
|
Lot of 2 - One Craftsman 12" Wood Lathe On Table & One SEGALOCK Key Cutter 1895
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Lot of 2- One Craftsman 12" Wood Lathe On Table& One SEGALOCK Key Cutter 1895 Item Description: This is a Lot of 2 Craftsman 12" Wood Lathe On Table& SEGALOCK Key Cutter 1895 to view our current ... moreofferings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 38766) nbsp, nbsp, Model: EAGALOCK Key Cutter 1895, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Features: clean, nbsp, nbsp, Date of Manufacture: unknown, nbsp, nbsp, Size: Craftsman 57 28 45 , nbsp, Color: gray, nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. We can not verify operational status. May need service and/or parts to make fully operational. nbsp, nbsp, Pickup Logistics and Handling: Forklift may be available on site to assist in loading on pickup day. However. NO loading dock is available at this location. Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please contact us for additional information before bidding. nbsp, nbsp, Sales Tax: PLEASE NOTE: I
|
|
|
SEARS CRAFTSMAN 12" WOOD TURNING LATHE COPY CRAFTER 1/2 HP MOTOR 10 CHISEL SET
You are looking at a Craftsman 12" wood lathe model 113.238160 with copy crafter model 113.249070. This lathe has a 1/2 HP motor. This item includes 10 wood chisels and owner's manuals. This lathe is very clean and works great. Please look closely at the photos and ask any questions before bidding. Thank you for looking and please take time to check out our other auctions! SHIPPING Our US shipping and handling charges are stated individually in each auction and are determined by weight. Size, and packing material. Please check our feedback from our satisfied customers. Payment is expected within 5 days of auction closing and feedback is given accordingly. Normally purchases will be mailed within 1-4 days after receipt of payment. RETURN POLICY Your satisfaction is very important to us. If we have made an error in our listing or have ... moremistakenly misrepresented an item. Please contact us within 3 days of receiving the item& we will work with you to reach a satisfactory resolution. Returns will be accepted under these conditions only. Buyer pays all return shipping fees. A full refund of the item's purchase price, minus the shipping costs, will be issued after the item has been returned, exactly as originally shipped, as per eBay policy. A 10% restocking fee may apply. INTERNATIONAL BUYERS-PLEASE NOTE: Import duties and taxes are NOT included in the item price or shipping costs. These charges are the buyers responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying* Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas Craftsman 12" Lathe Tailstock EXC Machinist
Atlas Craftsman 12" Lathe Tailstock EXC Machinist Very crisp true condition Everything runs right and is complete. This is in clean. Original, no signs of breaks or repair. I will combine shipping on multiple purchase- and will invoice at end of auction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144f4d23cec-0x10e-
|
|
|
ORIGINAL ATLAS CRAFTSMAN 10-12 INCH LATHE 10-450 TOOL POST GRINDER IN WOOD CASE
ORIGINAL ATLAS CRAFTSMAN 10-12 INCH LATHE 10-450 TOOL POST GRINDER IN WOOD CASE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge FINE RUNNING ORIGINAL ATLAS 10-450 TOOL POST GRINDER. FITS 10-12 INCH LATHES. COMES IN WOOD CASE. HAS EXTRA WHEELS AND SPANNER. FINE CORD AND SWITCH. VERY SMOOTH RUNNING. HAS REPLACEMENT 3450 RPM MOTOR. GREAT BELT. HEAVY AT 48 POUNDS. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
VINTAGE 1952 CRAFTSMAN WOOD LATHE OWNERS HANDBOOK MANUAL
This is a nice 1952 Craftsman lathe manual in good condition. Almost all the items we sell are USED unless otherwise stated. That means they are not going to look brand new. It is your responsibility to read the description and ask questions before bidding. Shipping charges are listed below and are for lower 48 states. Alaska and Hawaii will be figured at the end of auction. We will combine shipping. As long as the items can be shipped together without causing damage. We usually ship by UPS(unless otherwise stated) and require a street address for shipping. Almost all items are shipped with insurance. Unless otherwise stated. We ship only to a U.S. address. Thanks for looking and check out our other auctions. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Craftsman Variable Speed 15" Wood Lathe #351.217170 Local Delivery Available
Craftsman Variable Speed 15" Wood Lathe#351.217170 Local Delivery Available Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image This Lathe was manufactured by Craftsman. When powered on the motor starts up and runs. I am selling it with the lathe cabinet. The wheels are not attached. The model#is 351.217170. Local curbside delivery is available with a 150 mile radius of 33905 for $1.25 a mile. Payment is due within 5 days of winning the auction. If payment is not received I reserve the right to relist the item. Please do not bid if you do not intend to complete the transaction. There are others that would like to purchase ... morethe item. Shipping is expensive. I do my best to keep the cost down but I will not ship without insurance so please don't ask. In most cases your item will be shipped within 5 business days after payment. Life happens so if there is a delay I will notify you. All items I sell are antique or vintage. Therefore these items will have normal issues and imperfections due to age. Small imperfections are what makes the character of these items. I will mention and photograph any significant issues. Please check all photos and ask questions prior to bidding. All items are sold"AS IS" Please bid with confidence. I have been selling on ebay for many years. I strive to bring my customers unique items. From antiques to automobiles. I do my best to accurately describe the items I sell. We all see things differently so I include detailed photos in my listings. Please take the time to view them so you know what you are purchasing. Thank you for viewing my auction. If you have any questions please contact me prior to bidding.
|
|
|
Vtg CRAFTSMAN BENCH TOP WOOD LATHE # 103.23870
Vtg CRAFTSMAN BENCH TOP WOOD LATHE# 103.23870 In great vintage condition. Light surface rust Total length 46 inches. 30 inches between centers Belt driven with 4 speed pulley. Motor not included Pulleys show no wear. I don't think this was ever used? My father in law purchased this NEW at Sears in the late 1950's or early 1960's Has been collecting dust in his garage ever since. We are now liquidating his estate SEE PHOTOS- You will receive the lathe shown in the photos LOCAL PICK UP IN SANTEE CALIF. San Diego Area) If interested please feel free to CALL 619-994-8187
|
|
|
Sears Craftsman Spindle Speed 12" Wood Turning Lathe PICKUP ONLY
Normal 0 0 1 416 2375 19 4 2916 11.515 0 0 0 Sears Craftsman Spindle Speed 12" Wood Turning Lathe PICKUP ONLY You are bidding on the item in the title. Item tested and works fine. Mounted on MDF to ease use. Includes tool rest and chuck. Please click on the images at the bottom of the listing to see large pictures of this item. THIS ITEM IS PICKUP ONLY- NO SHIPPING. I accept Paypal- please contact me about other methods of payment. I can sell your collection! I will travel a day's drive from my home(Ann Arbor. Michigan) to pick up toys and other collectibles. I sell old toy cars, American toy trucks, Japanese tin toys, coins, comic books, baseball cards, and more. I take the time to include complete descriptions and nice photos with your listings. My care makes a difference! Contact me at 734-474-5023- message or text. If you have ... moreany issue with a transaction. Please contact me before you leave feedback. Thank you. Please save me in your favorites. My seller ID is Jacobmaxdad! Please visit my store:
|
|
|
Copy Crafter 113.249070 Sears Craftsman 12" Wood turning lathe
This is a Vintage/Antique Sears Copy Crafter for a Sears Craftsman 12" Wood-turning lathe. Model No. 113.249070. It comes with all of its parts I inventoried them with the copy of the manual provided as part of the package. The cutting edge is in great condition. The body has some surface rust that is cosmetic and could be removed and painted over.
|
|
|
4" Face plate Sears Craftsman wood turning lathe 22489 cast iron
This is a 4" Face plate Sears Craftsman wood turning lathe 22489. Cast iron. Fits any lathe with 3/4 16 right hand threaded spindle. Used for bowl turning. Great condition. Face plate comes with original box, screws and manual! Ready to use!
|
|
|
Vtg 9 inch CRAFTSMAN BENCH TOP WOOD LATHE 46 Bed , 36 inch Between centers
Vtg 9 inch CRAFTSMAN BENCH TOP WOOD LATHE# 103.23870 In great vintage condition. Everything moves& turns freely Total length 46 inches. 32 inches between centers Belt driven with 4 speed pulley. Motor not included Pulleys show no wear. I don't think this was ever used? My father in law purchased this NEW at Sears in the late 1950's or early 1960's Has been collecting dust in his garage ever since. We are now liquidating his estate SEE PHOTOS- You will receive the lathe shown in the photos LOCAL PICK UP IN SANTEE CALIF. San Diego Area) If interested please feel free to CALL 619-994-8187
|
|
|
Set of eight Craftsman high-speed steel wood lathe chisels in a fitted case
If I didn't already have an identical set. I would keep these for my own shop. I have been using mine for over 40 years and I love them. These were made in the USA in the glory days of American manufacturing when things were made to last forever.
|
|
|
Craftsman wood lathe tooling... 2 chucks & a 1MT work arbor with wrench
FREE SHIPPING TO USA ONLY! Both of the chucks and the 1MT arbor have the Craftsman name on them. The chucks both have I/2" X 20tpi threads and fit onto the work arbor of the same threads.
|
|
|
Atlas craftsman lathe wood turning tool rest tool makers lathe Chisel holder
Received this with my atlas tooling. Holds chisel handles up to 1" 1& 1/2" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146a446adae-0x127-
|
|
|
CRAFTSMAN SEARS WOOD LATHE TOOL PARTS LOT,FACE PLATE,LIVE,DEAD CENTERS TOOL REST
CRAFTSMAN SEARS WOOD LATHE TOOL PARTS LOT.ALL YOU LOOK IN PICTURES IS INCLUDED,ALL IN GOOD CONDITION,TURN SMOOTH THREADS OK,QUESTIONS WELCOME,THANKS.
|
|
|
CRAFTSMAN SEARS WOOD LATHE HEADSTOCK & TAILSTOCK
CRAFTSMAN SEARS WOOD LATHE headstock& tailstock.Nice condition,ALL IN GOOD CONDITION,TURN SMOOTH THREADS OK,center of spindle to bed aprox 4.5 in,QUESTIONS WELCOME,THANKS.
|
|
|
Vintage Sears Craftsman Dunlap wood lathe bed
$40 shipping to USA 48 states only. All others. Please ask. Here's a used Sears Craftsman Dunlap wood lathe bed for your consideration. This auction is for the bed only and does not include the headstock. It needs a little clean-up and cosmetic makeover but it's sound. Has no damage, and has a lot of potential. Thanks for looking!
|
|
|
Vintage Sears Craftsman Dunlap wood lathe headstock
Here's a used Sears Craftsman Dunlap wood lathe headstock for your consideration. It needs a little clean-up and cosmetic makeover but it's sound. Has good bearings, and has a lot of potential. Thanks for looking!
|
|
|
Craftsman Wood lathe and associated tools
Please read the entire listing prior to bidding. By placing a bid on this item. You agree to the terms stated in the listing. If you are the winning bidder for the item, please wait until you receive a total from the seller before sending payment. A 5% processing and handling fee will be added to the total cost(bidding total plus shipping) for each item. Up for sale is a used Craftsman wood lathe and associated vintage woodworking tools. I cannot find a number on the lathe. But I do have#2852, 2858, and 2863 on 3 of the tools. There are a total of 6 tools included with the lathe. The lathe and tools are in fair condition(SEE ATTACHED PICTURES) I do not know if the lathe works, but it appears to be in complete condition. See attached pics and contact seller with any questions prior to bidding. Thanks for looking and check out my other items. ... moreNO INTERNATIONAL SHIPPING*
|
|
|
SEARS CRAFTSMAN 12" WOOD LATHE SWITCH NAMEPLATE
SEARS CRAFTSMAN 12" WOOD LATHE SWITCH NAMEPLATE. MEASURES 3-5/8" X 5" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14767b79e61-0x112-
|
|
|
Vintage Craftsman wood lathe 4-jaw 4-inch chuck with original key. ¾ -16 mount
There's a lot of these around but you almost never see one with the original T-wrench because an Allen wrench will do it. If you like things proper(like I do) this one is for you. This is a four-inch diameter chuck with ¾" by 16 threads-per-inch mounting.
|
|
|
RARE ORIGINAL CRAFTSMAN WOOD TURNING 4 & 8 REST KIT ATLAS CRAFTSMAN 6" 618 LATHE
Rare- Original Craftsman wood turning tool kit for a 6" Atlas 618 or 6" Craftsman lathe. This accessory allows you to turn wood on your 618 lathe. The base mount slides right into your compound top. Then you have the option of mounting either tool rest into the base mount. Includes both the 8" and 4" wood rests and"T" block with hardware. Original wood turning tool kit in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1478aa72e08-0x113-
|
|
|
Lot of 4 Vintage Craftsman Wood Handled Lathe Tools *
Nice! Lot of 4 Wood Handled Lathe Craftsman Tools" Lot of 4 CONDITION: Tools are in good used condition. Some light rust to the metal however the wooden handles are in excellent condition! From a Smoke Free Home! Thank you- WE APPRECIATE YOUR CONSIDERATION OF OUR ITEM! ONLY CONFIRMED PAY PAL ACCOUNT PAYMENTS ARE ACCEPTED. FEEDBACK: We strive for nothing but FIVE star feedback. Please contact us if you have any concerns or problems. We will do our best to answer all questions. We have been on ebay for nearly 15 years. We have very few problems with our items because we give accurate descriptions. However. On occasion there can be questions. Please email your concerns prior to leaving feedback. We want everyone to be happy with their purchase! Please do not bid if you are unwilling to work through issues. We are not perfect. But as you ... morecan see from our feedback we work hard and take pride in giving honest accurate descriptions. We are not experts in any collecting field. We just enjoy finding things and getting them to people across America who can use them. SHIPPING: Shipping charges quoted include DELIVERY CONFIRMATION. We will combine shipping on multiple purchases(please wait for invoice) We ship using primarily USPS. On occasion we will use UPS if shipping charges can be saved. A small shipping and handling fee of.75 is charged to all packages. CALIFORNIA BUYERS must pay sales tax. NO INTERNATIONAL SHIPPING On Nov-27-07 at 02:32:04 PST. Seller added the following information: Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE 1950 CRAFTSMAN WOOD LATHE OWNERS HANDBOOK
I am selling one VINTAGE 1950 CRAFTSMAN WOOD LATHE OWNERS HANDBOOK MANUAL. Purchased from an inside workshop where it spent all of its time in a suitcase. Please look at pictures carefully. You probably know much more about this item than I do. Let me know if you have any questions, thanks for looking. I am open for additional shipping options, please ask before bidding. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-147ebc1a3ba-0x115-
|
|
|
ATLAS, DUNLAP, or CRAFTSMAN lathe face plat
5 1/4 wide with a 1" threaded hole.
|
|
|
Vintage Craftsman wood lathe 4-jaw 4-inch chuck. ¾ -16 threads for mounting
Shipping to USA only for the stated price. The chuck key is not included because it got lost. An Allen wrench will do it. This is a four-inch diameter chuck with ¾" by 16 threads-per-inch mounting. Each of the four jaws is operated independently. The jaws are reversible for chucking larger objects.
|
|
|
Antique workbench for Delta, Craftsman, other wood lathe.W/motor & electrics.
Here's a used wood lathe workbench for your consideration. It includes the motor that runs the lathe. It includes the cords and plug. I tested the motor and it runs strong. Smooth, and quiet. The cords may need to be replaced as they are very old. Has wheels on one end for easy mobility. Angle iron construction with plywood top& shelf. It needs a little clean-up and cosmetic makeover but it's sound and has a lot of potential. Everything works well. Thanks for looking!
|
|
|
Vintage Sears Craftsman wood lathe tool rest holder or banjo
Here's a used Sears Craftsman wood lathe banjo for your consideration. It's from a 101.06242 lathe. It needs a little clean-up and cosmetic makeover but it's sound and has a lot of potential. Thanks for looking!
|
|
|
4 JAW MANUAL CENTERING 4 INCH LATHE CHUCK 3/4"Threaded end Craftsman 111.21560
This is a U.S.A. CRAFTSMAN. Four Jawed Chuck. I Doubt it was ever Used. No. 111.21560. Measures Four Inch by Three and a Quarter From tip of jaw to Rear center Hole. 5lb. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1491c9ca691-0x10a-
|
|
|
Sears/Craftsman Wood Lathe Accessories, Arbor,Step Pulley,Chucks And Face Plate
Craftsman/ Sears Wood Lathe Accessories all in used condition. Arbor with tapered end and 1/2" threaded screw end including washers and two nuts, 4 Step Head Stock Pulley 3/4" bore#2441-103( Some Nicks On One Edge) Face Plate 3/4" threaded bore 3" across# 20912, Keyless Chuck 1/2" threaded bore# 22562 1/2" capacity and Craftsman Chuck 1/2 threaded bore# 29801 1/2' capacity including chuck key. All items are sold"AS IS" in used condition, Free Shipping" to the lower 48 only, NO INTERNATIONAL SHIPPING" The nicks on the step pulley should not impact the performance of this part)
|
|
|
sears craftsman wood lathe 10" S shaped tool rest
sears craftsman 10" S shaped tool rest. Looks like it was never used.
|
|
|
4 Wood Lathe Centers MT2 Spur Cup Screw Live Fits Delta Rockwell Craftsman
This is for the 4 wood lathe centers pictured. These were used on a delta wood lathe but might also fit other brands such as craftsman. These shows age. Use, and wear. Normally I don't sell the centers but I felt that someone might be able to use them. The spur has some small chips on the teeth and the cup is bent around some of the edges as though it had been hit with a hammer plus the tip is worn down from use. All four have some surface rust on them. Please check out the pics for any other details and feel free to ask questions. Thanks for looking. We accept paypal only and ship to the United states only. No international shipping including APO/FPO/DPO zip codes. Payment required within 3 days or contact us for an extension. After you receive your item leave feedback and we will do the same.
|
|
|
Craftsman Midi Lathe Wood Working Shop Iron Tool LOCAL PICKUP ONLY
Item works. Whats shown in picture is whats available, no extra parts
|
|
|
DUNLAP VINTAGE 6" WOOD LATHE FACE PLATE - 5/8" ARBOR - CRAFTSMAN ATLAS
This auction is for a vintage DUNLAP 6" Faceplate with a 5/8" arbor hole. I did not clean this one up too much as it's original and looks like it's in good low mileage shape with original paint and logo and no signs of heavy usage. Please see pictures for condition. VERY FAST FREE PRIORITY SHIPPING INCLUDED! Items usually ship out the same day!
|
|
|
Craftsman Wood Lathe 4-Step Spindle Pulley
This item is a 4-step pulley for Craftsman wood lathes. The bore is 3/4" in diameter without key way. The index marks are 10 degrees apart. The diameters of the pulley are from 2" to 4" The length of the pulley is about 2-1/2"
|
|
|
Craftsman 9" Iron Bench Top Wood Lathe 30" Between Centers
Up for sale here is a: Craftsman 9" Iron Bench Top Wood Lathe*30" Between Centers Feel free to ask any questions. SCT141126-09
|
|
|
UNKNOWN LATHE #2 MORSE CENTER CRAFTSMAN ATLAS MINI LATHE WOOD ?
Thanks for shopping Midnight Auto To view our complete inventory please visit our We sell a wide verity of items new and used and are not experts on everything we sell. We do our best to accurately identify the item and supply clear pictures for inspection. Please see pictures for condition and feel free to ask questions. Although our items do not come with a warranty. We guarantee a accurate description of the condition according to ebay. If your item is sold as"New" or"Used" and is defective we will refund the purchase price of the item less shipping. We do not accept returns on electrical items or items sold"For parts or Not working" Defective items must be returned for inspection prior to credit. Buyer pays return shipping. Our feedback is automatic and will post positive once feedback is left for us. cafe ... morePowered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DUNLAP CRAFTSMAN 109 CNC LATHE ATLAS SHERLINE TAIG MINI EMCO UNIMAT SEARS MILL
DUNLAP/ CRAFTSMAN 109.0702 LATHE 6 X 18 COMPLETE DISASSEMBLY. PROFESSIONALLY STRIPPED& RECOATED TIGHT BEARINGS& SOME NEW PARTS BRAND NEW CHUCK WITH NEW REPLACEMENT CHUCK JAWS. SCROLL BACK& TOMMY BARS INCLUDES MILL TABLE THAT BOLTS TO CROSS SLIDE NEW THRUST BRONZE BEARINGS. LOCK COLLAR AND BALL BEARINGS ON Z AXIS FULL SET OF ADDITIONAL BRASS FOR NEW BRASS GIBBS- CARRIAGE ALREADY DRILLED& TAPPED! MAIN BED WAY OILERS/WIPERS INSTALLED SPECIAL ACME NUT FOR LEAD SCREW/CARRIAGE, CNC PARTS& CONTROLLER NEW TB 6600 PROFESSIONAL 3 AXIS STEPPER MOTOR DRIVE UP TO 5 AMPS POWER(ADJUSTABLE) UP TO 40 VOLTS INPUT REMOTE KEYPAD AND DISPLAY IN CUSTOM FABRICATED ENCLOSURE 2 SETS OF RIBBON CABLE(LONG& SHORT) TO CONNECT KEYPAD/DISPLAY BUILT IN MEMORY ALLOWS PROGRAMMING WITHOUT A COMPUTER OR MACH 3 MACH 3 DEMO IS INCLUDED ALONG WITH FULL ... moreMANUAL FOR CONTROLLER, INCLUDES NEMA 17 MOTOR MOUNT FOR"X" AXIS INCLUDES NEMA 23 MOTOR MOUNT FOR"Z" AXIS(2) LIMIT SWITCHES& MAIN POWER TOGGLE SWITCH(2) FIVE FEET LONG MOTOR WIRE- 4 CONDUCTOR. 18 GA. ADDITIONAL WIRE FOR OTHER CONNECTIONS& LIMIT SWITCHES 2& 4 WIRE SOME W/ SHIELD PARALLEL CABLE& POWER CORD COOLING FAN& SOME ALUMINUM STOCK FOR BRACKET FABRICATION, ADDITIONAL TOOLS/PARTS(2) DRILL GAGES RUBBER ACCORDIAN BED WAY PROTECTOR ASSORTED SET OF HIGH SPEED STEEL(AMERICAN) LATHE TOOLS MODIFIED DIGITAL CALIPERS(WAS GOING TO BE USED FOR TAILSTOCK SPINDLE DEPTH GAUGE) HALF NUT STUD 3/8" WIDE MOTOR V-BELT, MINIMUM TO FINISH THIS PROJECT YOU NEED: 36V POWER SUPPLY 5-7 AMPS. NEMA 17& 23 STEPPER MOTORS W/ COUPLERS, FABRICATE BRACKETS TO ATTACH MOTOR MOUNTS& BRACKET FOR ACME NUT TO ATTACH CARRIAGE(OR PURCHASE A USED HALF NUT FEED LEVER. INSTALL& CONNECT ALL WIRING. LIMITS SWITCHES ETC. A THRUST WASHER/LOCK COLLAR FOR CROSS SLIDE FEED SCREW. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE AMERICAN 8-1/2" LATHE WOOD FACE PLATE 1-1/2" x 8 MOUNT - CRAFTSMAN
This auction is for a vintage American made lathe faceplate with a 1-1/2" x 8 tpi mount. I think this one was intended for Metal or wood. I can't see a brand name but there are some casting numbers(see pics) I'm pretty sure this was an original accessory for a vintage American lathe. NOTE: It's in good shape except it has had two pieces cut out of the face(please see pictures) Selling it cheap because of the holes! VERY FAST FREE PRIORITY SHIPPING INCLUDED! Items usually ship out the same day!
|
|
|
VINTAGE 3.5" WOOD LATHE FACE PLATE - 5/8" ARBOR - CRAFTSMAN ATLAS
This auction is for a vintage 3.5" wood lathe faceplate or backplate with a 5/8" arbor hole. It's in good shape with a little surface rust on the face but no signs of heavy usage. There are casting numbers on the rear. Please see pictures for condition& details. VERY FAST FREE PRIORITY SHIPPING INCLUDED! Items usually ship out the same day!
|
|
|
Vintage SEARS CRAFTSMAN DUNLAP Wood Lathe We'll ship
Up for auction is a very nice SEARS CRAFTSMAN DUNLAP wood lathe All parts turn freely and feel tight just add a motor and you're ready to go 45 inches long and about 40 pounds Money back if not completely satisfied Auction for lathe only stand will be sold later I have more online right now Thank you
|
|
|
sears craftsman wood lathe Head stock assembly.
sears craftsman wood lathe head stock assembly.
|
|
|
Sears 149 Craftsman 149.23860 Wood Lathe Tool Rest 273-11
Sears 149 Craftsman 149.23860 Wood Lathe Tool Rest 273-11, Click to View Image Album Click to View Image Album The item we are offering here is a. Sears 149 Craftsman 149.23860 Wood Lathe Tool Rest 273-11 You will receive the item as pictured. Items measures around 9-1/2" and 1-1/2"wide. Has a part# of 273-11 in the casting. The shipping will be FREE within the main 48 of the USA. Please send a request for a shipping quote when shipping to other locations. The Purchaser of this unit will be buying this on a were is- as is contract. There is no warranty. The item is available for your viewing with a appointment at anytime. The location is Laurel. Delaware 19956. You can reach me(302) 228-0907 to make the arrangements and or ask Questions. Feel free to view my other auctions of other items that may be of interest to you. Thanx. Tools4yourbid ... moreInformation regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by the Seller to determine it's fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose Payment I accept the following forms of payment: PayPal Shipping& Handling $0.00 USPS First-Class Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|