|
Used Lagun Master 2600 CNC Combination Horizontal & Vertical Bed Mill
1) Used Lagun Master 2600 CNC Combination Horizontal& Vertical Bed Mill- New 1999 Specifications: Table dimensions. 102"x31.5" Travels- X axis. 98" Y axis. 39" Z axis. 39" Spindle motor. 25 HP Spindle speeds(2 ranges) 50- 3.000 RPM Spindle taper. 50 Max feed rate. 300"min Rapids feedrate. 400"min Approx foot print. 20' x 9'6" x 11'H Equipped with: Fagor 8055 CNC control Coolant guarding Included Mastercam Post Processor PLEASE CALL JEFF@ 888-998-4440 FOR MORE INFORMATION!
|
|
|
Miyano TSV-33 CNC Mill (PARTS ONLY) Toolchanger,Ballscews,Table,Linear Ways..
Miyano TSV-33 Drill&Tap center Had spindle drive problems so control was removed. ALL Mechanical Parts available. If you have one of these machine and you break a tool claw it will cost $900ea from Miyano. We will remove parts and ship to winning bidder or can be picked up whole.
|
|
|
Lagun FTV-2 Vertical Mill with Proto Trak AGE2 with MX2 Monitor
Fully functional Lagun FTV-2 with 4" Riser block and Kurt Power Drawbar with Prototrak AGE2 control with MX2 Monitor. All in great condition and fully operational. Lovingly restored by Veterans of the U.S. Armed Forces to support Workshops for Warriors and their mission to train. Certify, and place Veterans and Wounded Warriors into manufacturing careers. 100% of all profits go to support Workshops for Warriors Please visit them at www.workshopsforwarriors.org Machine Specifications: 50″ wide by 10″ deep(50" x 10" Table) Table Dimensions-3 HP. 220/440 v. 3 Phase-R-8 Spindle-Newall Scales X and Y axis-4" Riser block for machining extra tall stock-Air Powered Kurt Powered Drawbar-Integrated Coolant System(unknown working condition as it is missing the spout that goes from the column to the table and ... morewe have not tested it) Hardened Ways-Boxed Ways Normal 0 false false false EN-US X-NONE X-NONE Video of Machine in Operation Video of Digital Readout in Z in operation Video of Digital Readout in X in operation Video of Digital Readout in Z in operation Video of Digital Readout in Z in operation Local pickup is encouraged. But we will crate and ship anywhere in the world. The machine weighs roughly 2.500 pounds and measures(without a crate) 96" tall by 72" wide by 72" deep. Due to the number of requests for quotes, we cannot provide shipping quotes expect to the winning buyer. Locals are welcome to arrange for a viewing on Friday the 16th of August or Saturday the 17th of August. No questions asked 14 day return policy with shipping and crating charges paid for by the buyer. Machine must be returned in the same condition it was sent out. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hurco Three 3-Axis CNC BMC-40 Vertical Machining Center Manual
Our internal inventory number on this product is LHM12# MN65-B/3. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Hurco three axis CNC BMC-40 Vertical Machining Center Manual. Table of Contents: 1. General 2. Installation 3. Operating Instructions 4. Theory of Operation 5. Maintenance 6. Parts List Publication Number: 704-0001-370. Serial Number: BD-8003028A. Dimensions: 10" ... morex 11.5" x 1.75" Weight: app 3 Lbs. Copyright: 1987 It is(+/ 300 Pages. Seems complete and in generally FAIR used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If you aren't sure this will work for you. Please don't buy it. If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay $3.00 Handling charge + ACTUAL UPS COSTS from 49534! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 am delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. We can ship on your account. Note. There is still a handling fee even if we ship out on your account. see listing details) Your shipment will not get shipped until the handling fee is paid for. International Shipping Polices: We ship FedEx Int
|
|
|
FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE - #FVTM-1 1/2
aims FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE- FVTM-1 1/2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Frejoth Machinery. This is a used Multiple Speed Vertical Milling Machine in GREAT condition. Model# FVTM-1 1/2 Serial# JMT2360 Features: Enco Platinum Edge 2-Axis DRO(only has Y scale currently) Vector X-Axis Power Feed. Chrome Ways. 8 Speeds(belt/pulley) 2 Horsepower Spindle Motor. One Shot Lubrication System. Specifications: Table: Overall Size: 42" x 9" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47-1/4" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 12" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. ... more18.75" max. Table to Spindle Nose: 2.5" min. 18.25" max. Spindle Diameter: 1.875" Quill Diameter: 3.375" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: R8 Speeds(16) 90 to 2.780 rpm. Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 2 Horsepower. 220/ 440 Volt, 1,720 rpm, 6/ 3 Amp, 60 Hz Electrical: 220/ 440 Volt. Three Phase Overall Dimensions: 58" x 60" x 80" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE- FVTM-1 1/2 FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE- FVTM-1 1/2 FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE- FVTM-1 1/2 FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING MACHINE- FVTM-1 1/2 FREJOTH 9" x 42" MULTIPLE SPEED VERTICAL MILLING
|
|
|
1997 HAAS VF-3 CNC VERTICAL MILL 40"x20" VMC, 4th-Axis Ready
ebay template 1997 VF-3 CNC Vertical Mill I TEM S OLD A S P ICTURED The Haas VF-3 is a rugged. Medium-sized vertical machining center that yields full reliability and accuracy in a moderately sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 15 hp spindle drive. 40" x 20" x 25" 1016 x 508 x 635 mm) travels and is built utilizing vibration-damping cast-iron components. Like every Haas machine, the VF-3 represents years of ongoing refinement. Customer feedback, coupled with the relentless pursuit of perfection, sees advancements and design-enhancing changes incorporated directly into the production line every day. With a long list of standard features and high-productivity options, the Haas VF-3 is one of the best values available today. Table and ways are in very good condition despite cosmetic coloring as ... morea result of materials and parts made. To find out more about all the special things that make this Haas vertical machining center perhaps the most popular machine tool in the world today. Check out Features and Options below. Please call for further details and updates(818) 718-6734 Ask for Jerad STANDARD FEATURES Dual RS-232 Ports High Speed Brushless Servo Motors(710 ipm Rapids) Chip Auger System Coolant System Easy-Access Roll-Out Coolant Tank and Pump One Button Power-up Standard 256K Memory User Friendly Haas Control 3.5" Floppy Drive Made entirely in The U.S.A. Automatic Lubrication System Massive Cast-Iron Construction Heavy-Duty Sheet metal Enclosure 208/230-VAC 3-Phase Power Rdy 20-Station Ct-40 Carousel Automatic Tool Changer AC Brushless Direct-Coupled Servo Motors and Drives 7500-RPM Spindle Driven by a 15 Horsepower Intermittent Duty Gearbox Motor OPTIONS INSTALLED 4th Axis Ready SPECIFICATIONS TRAVELS TABLE SPINDLE FEEDRATES AXIS MOTORS TOOL CHANGER GENERAL 380-480VAC Door Open Width 48.5 1220mm Machine Height*Specifications based on catalog brochure and subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will requi
|
|
|
MORI SEIKI "MV-JUNIOR" CNC VERTICAL MACHINING CENTER MILLING FANUC 10M
discounted to help you with shipping. Clean Clean Clean as they ever come! great working condition. Original Paint. MORI SEIKI"MV-JUNIOR" CNC VERTICAL MACHINING CENTER S/N 1245. NEW 1987"FEATURING FANUC 10-M CNC MACHINE CONTROL" TABLE TRAVEL- X AXIS) 22" SADDLE TRAVEL- Y AXIS) 16" SPINDLE HEAD VERTICAL TRAVEL- Z AXIS) 18" PROGRAMMABLE SPINDLE SPEEDS- 6.000 RPM SPINDLE INTERNAL TAPER- CAT 40 SPINDLE DRIVE MOTOR- 7.5 HP WORK TABLE SURFACE AREA- 16" X 35-1/2" WORK TABLE LOADING CAPACITY- 660 LBS. AUTOMATIC TOOL CHANGER. RANDOM ACCESS- 16 TOOL STATIONS APPROXIMATE MACHINE WEIGHT- 8.000 LBS APPROXIMATE MACHINE DIMENSIONS- 84"LR) X 64"FB) X 99"H) EQUIPPED WITH- FANUC 10-M CNC MACHINE CONTROL WITH CRT DISPLAY RS-232 COMMUNICATION PORT FOR UP/DOWN LOADING OF MACHINING PROGRAMS HALF HEIGHT ... moreTABLE ENCLOSURE CHIP/SPLASH GUARDS AUTOMATIC LUBRICATION(10) MISCELLANEOUS TOOL HOLDERS COOLANT SYSTEM(1) KURT VISE WORK LIGHT Under power for inspection. PRICE- F.O.B. OUR WAREHOUSE. Middlesex, NJ 08846 Loaded on your truck. Or we can arrange shipping for you. Call Marc with any Q's(908) 236-9005
|
|
|
16mm CARBIDE INSERT THROUGH COOLANT MILLING CUTTER & 3 NEW INSERTS
16mm Carbide insert through coolant milling cutter and 3 new inserts Shank 15mm x 75mm overall length 100mm 3 New Sandvik inserts- R390-11T3 08M-PM 4040 RO8 Will post world wide Recycled packaging always used if possible After receiving payment i will post A.S.A.P. work permitting:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14060387e19-0xfe-
|
|
|
Milling machine/CNC cutters JOB LOT
Job lot of cutters.Some have been modded for special jobs.Some have rusted slightly Free postage in UK.May take upto 5 working days TNT is an extra £5 and is next day(if ordered before 9.30am) saturday delivery not included
|
|
|
Hand Chaser EXTERNAL 0.8MM METRIC .8MM
Hand Chaser. Good Used/ Slightly Used UK MADE ARCHIVE PICTURE SHOWN AS SAMPLE ONLY. ACTUAL TOOL MAY VARY ONE CHASER ONLY
|
|
|
Threaded shank woodruff cutter 12mm thread 37mm dia 5mm width shaved edge.....15
Threaded shank woodruff cutter 12mm thread 37mm dia 5mm width shaved edge and shaft has been skimmed. It is in excellent condition and is still very sharp. We have several hundred engineering items for sale. They came from a local company which has gone into liquidation. Most if not all the items were being used up until January this year. Please view our other listings and save on postage. We prefer PAY PAL- please pay within 48 hours- ALTERNATIVELY postal order- or cheques. Minimum £10. Dispatched normally within 1 to 3 working days. WE HAVE NO FACILITIES FOR COLLECTION If you have less than 5 feedbacks please contact us before bidding. Other wise your bid might be blocked automatically If you have any concerns about this item after purchase please mail us before leaving feedback so that we can resolve it. Thanks. COMBINED POSTAGE- ... moreSECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE- AFTER THE MOST EXPENSIVE POSTAGE RATE- WHERE IT IS POSSIBLE TO COMBINE ITEMS Please note P&P charges reflect not only postage but packing materails. Time to pack and take to post office or courier. All items are insured to cover loss or damage- some sellers will charge you extra for this. Courier charge for mainland England or mainland Europe- other areas please ask! Powered by
|
|
|
Threaded shank woodruff cutter 24mm thread 38mm dia 15mm width ..............2
It is in excellent condition only a tiny chip on one edge. And is still very sharp. We have several hundred engineering items for sale. They came from a local company which has gone into liquidation. Most if not all the items were being used up until January this year. Please view our other listings and save on postage. We prefer PAY PAL- please pay within 48 hours- ALTERNATIVELY postal order- or cheques. Minimum £10. Dispatched normally within 1 to 3 working days. WE HAVE NO FACILITIES FOR COLLECTION If you have less than 5 feedbacks please contact us before bidding. Other wise your bid might be blocked automatically If you have any concerns about this item after purchase please mail us before leaving feedback so that we can resolve it. Thanks. COMBINED POSTAGE- SECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE- AFTER ... moreTHE MOST EXPENSIVE POSTAGE RATE- WHERE IT IS POSSIBLE TO COMBINE ITEMS Please note P&P charges reflect not only postage but packing materails. Time to pack and take to post office or courier. All items are insured to cover loss or damage- some sellers will charge you extra for this. Courier charge for mainland England or mainland Europe- other areas please ask! Powered by
|
|
|
Threaded shank woodruff cutter 24mm thread 30mm dia 15mm width CLARKSON 18mm ..4
It is in need of sharpening condition. We have several hundred engineering items for sale. They came from a local company which has gone into liquidation. Most if not all the items were being used up until January this year. Please view our other listings and save on postage. We prefer PAY PAL- please pay within 48 hours- ALTERNATIVELY postal order- or cheques. Minimum £10. Dispatched normally within 1 to 3 working days. WE HAVE NO FACILITIES FOR COLLECTION If you have less than 5 feedbacks please contact us before bidding. Other wise your bid might be blocked automatically If you have any concerns about this item after purchase please mail us before leaving feedback so that we can resolve it. Thanks. COMBINED POSTAGE- SECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE- AFTER THE MOST EXPENSIVE POSTAGE RATE- WHERE IT ... moreIS POSSIBLE TO COMBINE ITEMS Please note P&P charges reflect not only postage but packing materails. Time to pack and take to post office or courier. All items are insured to cover loss or damage- some sellers will charge you extra for this. Courier charge for mainland England or mainland Europe- other areas please ask! Powered by
|
|
|
Milltronics Manufacturing CNC milling machine
I do not know much about this machine I do know that the spindle motor smokes when it is plugged in and the controller will not come on it has an air chuck and i will send all the tooling that goes on it with it including a vice buyer has to pick up or arrange shipping
|
|
|
CNC Bed Mill/milling bridgeport head, 5HP/220V, XYZ 41"x19"x22" w/Centroid M400
Manufacturer Refurbish CNC Bed Mill. Brand new condition. New controller installed. One-year warranty gruantee Machine warranty: 3 months. Don't miss it.Just click! l Centroid M400 control with 15” LCD l 5 HP Spindle Motor. NST40/ NMTB 40 or CAT 40 Spindle Taper l 4, 200 rpm spindle speed with HI-LO gear l Hardened& Ground with turcite-B coating guide way l Double nut precision ball screws hardened& ground for high accuracy and long lasting l FC30 Meehanite Casting main frame with annealed& stress relieved for long term reliability l 100% Laser tested for positioning accuracy& repeatability l Box ways design on Y& Z axis to provide maximum rigidity& stability l Standard way covers on all three axes l Coolant System l Central lubrication system l Built-in Quartz work light l Tool box& Tools Specification of ... morethe machine: Table: 12” x 60” 305 x 1520 mm) Longitudinal travel(X-axis) 41” 1050 mm) Cross travel: 19.6” 50 0 mm) Vertical travel: 22” 56 0 mm) Spindle nose to table top(D) 4.3”~2 6.4” 110~ 670 mm) Load capacity: 1100 lb(500 Kg) Spindle taper: NMTB 40 or CAT 40 Spindle Speed(r.p.m. 80 to 4 200 rpm Transmission of spindle& motor: Belts Spindle center to column front surface: 20” 510 mm) Head swivel(Right/ Left) 90 degrees Feed Rate: Rapid feed rate: X/Y/Z: 240 ipm AC Cutting feed rate: 1- 120 ipm Motor: Spindle motor/max torque: 5 HP/ 3.7 KW Servo motors on XYZ: 1 KW AC servo Coolant pump: 1/8 Hp Lubrication pump: 150 W Power requirement: 10 KVA. Voltage3 Phase 208-230 Automatic Tool Changer No. of tools: N/A Max. tool diameter: 3. 5” 9 0 mm) Max. tool weight: 1 5 lb( 7 Kg) Length X Width X Height(LXWXH) 115.6” x 82.7” x 101' 2937mm x 21 00 mm x 2580mm) Net Weight: 5.500 lbs. 250 0 Kgs) Additional shipping instruction: All machine packed on wooden skid. Shipping Cost: Buyer will pay for all shipping costs. The Truck which deliver the machine must be a Flat bed or step deck truck. With Air Ride system. No Van or enclosed trucks are accepted. The Skid must be ab
|
|
|
Maxnc T10 Milling Machine And Maxnc Lathe.
maxnc 10CL mill mini cnc desktop milling machine is ideal for making custom rings and jewelry via wax models and investment casting. And for dentistry, model making, light machining, and Maker& hobby uses. Fast prototyping using subtractive methods. The machine was in storage for over a year come's on when plugged in. They are being sold as is because they have not been fully tested. They come with soft ware. And assessory. The machine's are fully supported by the manufacturer.XiMotion, so you can get all parts and service from them, the machine is still being sold by them and their distributors. The MAXNC T10 is a closed loop Servo system. Beware of non-closed loop machines.if they lose their stop counts. They will either trash the part you are making or your cutter, or even the mill itself. This controller runs up to 4 axes ... morefrom a single parallel port on a host PC upon which the Maxnc software runs. The control reads the encoders at a rate of over 60.000 times a second and the feed-back is analyzed by the CL motion system, which has encoders and has a resolution of 0.00025 inches. Spindle ON/OFF and speed control from the software Anti-backlash system provides zero backlash on all axes Light weight but durable frame and stages made from 6061-T^ aircraft aluminum. Hard anodizing provides exceptional wear resistance. Proven slide dovetail construction with adjustable gibbs for long lasting accuracy. Spindle supplied with ER-16 collets. It can accept optional drill chuck or tool holders. Collet range 1/16" to 3/8" Based on the position of the encoders. The outputs to the motors are advanced, retarded or modified as needed- this is the difference between a servo system and an open loop stepper system. which can slip and lose its position. As well as not necessarily tracking the commands being issued to it by the controller software's Gcode) which you'll find in almost all of the hobby and low cost machines. The servo motors used in the CL systems are of step configuration to obtain ver
|
|
|
Haas VF2 Control Simulation Module, Mint Condition
This Haas VF-2 CSM is used but in mint condition. This has seen very little use and has barely a scratch on it. This is large and heavy. It will weigh around 90 pounds packed. So shipping will not be cheap. It will ship via UPS Ground. If you will pay by check. I will ship it to you for free. PayPal is always welcome. But shipping will not be free with PayPal. This will carry a 14 day return warranty. Minus shipping, if you are unhappy with your purchase. Personal checks, certified funds and PayPal are all welcome. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14065021ad3-0xf4-
|
|
|
Smithy Granite Classic 3-in-1 Combo Mill Lathe Drill with Digital Readout
Lightly used and in excellent condition. Comes with lots of tooling. Collets, chuck, live center for tail stock, carbide inserts, vise, and other various components. Table is included if you want it. I installed digital readouts on all three axis which makes this machine so much more accurate then using the hand dials. MESSAGE ME WITH ANY QUESTIONS OR IF YOU WANT MORE PICTURES. WILL NOT SHIP. WEIGHS OVER 700 POUNDS. Precision Machine Shop- On your Bench Top. Most Machining involves one of three basic operations. You can do it all on a Granite 3-in-1 machine! With this machine you'll have all the controls you need to turn outside and inside diameters to precise dimensions. Do facing cuts. Taper turning, thread cutting operations with inch or metric threads, and bore larger, more precise holes then could be done with a drill or reamer. ... moreWith a lathe you'll create parts that would be difficult. If not impossible to do on any other type of metal working machine. That's why they're the most essential piece of equipment in ever machine shop. You can't do machine work without one. LATHE turns horizontally. Click image to play video) 1. LATHE TURNING. Use the Granite's lathe to cut round or cylindrical pieces from metals as hard as high carbon steel to materials as soft as plastic or wood. Turn outside and inside diameters to precise dimensions. Do facing cuts. Taper turning, cut inch and metric threads. With the lathe you'll create parts that would be difficult, if not impossible to do on any other type of metal working machine. With this machine you can create smooth flat surfaces at precise angles. Cut grooves. Shoulders, and pockets. Mill keyways in shafts. Do dovetail work. Cut gears, slot and a lot more. We designed the Granites with deep dovetail ways for added stability. And built the milling spindle to light industrial specifications for greater accuracy and long life. When you combine these features with the Granite's variable speed motor. And fully adjustable power feed system yo
|
|
|
NICHOLS 6.75" x 21" HORIZONTAL MILLING MACHINE
aims NICHOLS 6.75" x 21" HORIZONTAL MILLING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by W.H. Nichols Co. This is a used Horizontal Milling Machine in working condition. Features: Hardened/ Ground 40 Taper Spindle. 3/4 Horsepower Motor. This"small foot print" Horizontal Miller would make an excellent addition to your to your home shop or machine shop. Especially were space is limited. Manufactured by W. H. Nichols& Sons of Waltham. Massachusetts, the Nichols"Hand Milling Machine" as it was termed in their advertising literature, was a very robust, well-built tool intended for"volume production of small parts at low cost" The main spindle was ruggedly constructed and accurately built with a hardened nose(ground ... moreinside and out) a 1" bore and a 40 MMS taper- the assembly was guaranteed to run within 0.00015" of true. Although the stand. Main body, knee and table were of conventional design, the Nichols employed(for a horizontal miller) an unusual arrangement whereby the entire head assembly, counterbalanced by the weight of the motor and complete with main spindle and overarm, could be moved up and down over a distance of 4-1/2" The movement, on hand-scraped dovetail slides, was under the sensitive control of a long lever acting through rack-and-pinion gearing whilst a cleverly-engineered sliding pivot between motor and head allowed the belt to remain at a constant tension no matter what the position of the head. The pulleys fitted to both the motor and spindle was manufactured in cast iron and were, claimed the makers, heavy enough to produce something of a flywheel effect and so smooth out the drive. Specifications: Table: Table Size: 21" x 6-3/4" T-Slot Size: 5/8" wide. Travels: Longitudinal(X-Axis) 10" Cross(Y-Axis) 7" Knee(Z-Axis) 14" Rise and Fall of Spindle Head: 4-1/2" Spindle: Taper: NST-40 Spindle Diameter: 3" Motor: 3/4 Ho
|
|
|
Top Well, 3 Axes CNC Knee Type Vertical Milling Machine, Analam 1100M Control
This Machine was Built New in 1996. Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" Top Well Vertical Knee Type. CNC Milling Machine complete with an Analam Model 1100M. 3 Axes CNC Controller S/N 856027. You just can't go wrong with this machine. This machine tool was built in Tiawan by one of that countries premier machine tool builders and imported by Mitek Machine Tools of Chino. CA. The 3 Axes CNC controller is the very desirable Analam 1100M. Specifications for this machine are as follows: Spindle Drive Motor: 5 HP Spindle Speeds: 70 RPM to 3.800 RPM, Infinately Variable Table Size: 10" X 50" Longitudinal Travel(X axis) 31" 660 mm) Cross Travel(Y axis) 15" 330 mm) Knee Vertical Travel(Z axis) 6" 406 mm) + 15" Knee Travel ... morewith Power Elevation Ways: Box Ways. Hard Chromed and Ground Spindle Taper: 40(Power Draw Bar) Quill Power Feeds: 0015" 003" 006" 038 mm, 076 mm, 15 mm) Quill Travel: 6" 127 mm) Maximum Table Load: 880# Maximum Throat Depth: 24 1/2" 571 mm) Weight of Machine: 3.820# Accessaries include: Coolant with chip pan. Chip and coolant guard, power draw bar. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, frei
|
|
|
NICE!! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE
aims NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cincinnati Milling Machine Company. This is a Toolmaster Variable Speed Vertical Milling Machine in working condition. Model# Toolmaster Serial# 6J4V5T-132 Features: NMTB 40 Spindle. Variable Speed. Bijur Lubrication System. X-Axis Power Feed. Heavy Duty Box Ways. Specifications: Table: Overall Size: 42" x 10" T-Slots: 3@ 2-1/4" centers T-Slot Size: 5/8" Travels: Table Travel(X-Axis) 22" Saddle Travel(Y-Axis) 10" Knee Travel(Z-Axis) 14" Quill Travel: 5" Ram Travel: 17" Spindle: Spindle Diameter: 3" Quill Diameter: 3-3/4" Taper: NMTB40 Spindle Speeds: 85 to 535 rpm(low) 615 ... moreto 3.800 rpm(high) Quill Feed: 0.0015/ 0.003/ 0.006 in.rev. Head Adjustments: Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 2 Horsepower. 230/460 Volt, 1,710 rpm, 5.8/2.9 Amp, 60 Hz, Three Phase Electrical: 230/460 Volt. Three Phase Overall Dimensions: 61" x 60" x 81" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOOLMASTER 10" x 42" VARIABLE SPEED VERTICAL MILLING MACHINE NICE! CINCINNATI TOO
|
|
|
OKK PCV 55 VMC 50TP,Heavy Cutter,40" x 22" x 20"
OKK PCV 55 Vertical Machining centers Specifications YEAR NEW. 1997 TABLE SIZE.48" x 22" MAXIMUM TABLE LOAD.1540 LBS SPINDLE NOSE TO TABLE TOP.5.9" 26.3" X AXIS TRAVEL. 40" Y AXIS TRAVEL.22" Z AXIS TRAVEL.20.4" RAPID TRAVERSE RATE X. Y AXES. 787 IPM RAPID TRAVERSE RATE Z AXIS. 629 IPM CUTTING FEED RATE. 0.1- 393 IPM SPINDLE TAPER.CAT 50 SPINDLE SPEEDS(2 SPEED GEARED) 100- 10.000 RPM SPINDLE MOTOR.30/25 HP TOOL CHANGER CAPACITY. 20 STATIONS MAXIMUM TOOL WEIGHT. 44 LBS MACHINE WEIGHT.15.501 LBS APPROXIMATE DIMENSIONS. 165" x 127" x 121" If you have any questions please contact us at 866-803-5202 or 714-892-9800 If you need a shipping quote please contact Tim at Abba Freight 866-779-9350 or tims@abbafreight.net
|
|
|
Quantity of Carbide Milling Cutters & Lathe Tips CARBIDE
Quantity of Lightly used Carbide Milling Cutters& Lathe Tips They are all Carbide Heavy lot to Post
|
|
|
SANDVIK R390-032A32-11H 32MM DIAMETER MILLING CUTTER USED ENGINEERING CNC
SANDVIK R390-032A32-11H USED MILLING CUTTER IN VERY GOOD COND COOLANT THRO DIAMETER 32MM 10 X INSERTS INCLUDED R390-11 T3 08E-ML 2030 I WILL SHIP ABROAD
|
|
|
Lot of 19 Used Milling Cutter Discs 1" Arbour
Industrial milling cutters for 1" arbour. These are all straight edged cuts for square profile and 8 TPI. Barely used with no missing teeth and in excellent condition. A sample from a larger collection and sold as seen. But if local pick up is chosen you can select your own. Any questions please ask. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1406f568d65-0xf8-
|
|
|
3/4" cut 5/8th thread 4 flutes milling cutter slotting drill
4 flutes milling cutter slotting drill 3/4" cut 5/8" thread ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1406f568d83-0x104-
|
|
|
Lot of 6 Large Hand Reamers. 1 1/8" 15/16" 7/8" 45/64" 21/32" 1/2"
Used and the odd small corrosion spot on the cutters but still serviceable.
|
|
|
10 SECO TNMM 110308-37 TP15
10 SECO TNMM 110308-37 TP15(NEW) On 30-Jan-11 at 00:12:47 GMT. Seller added the following information:
|
|
|
10 SANDVIK 151.2-3G10 (235)
10 SANDVIK 151.2-3G10(235) NEW On 30-Jan-11 at 00:05:44 GMT. Seller added the following information:
|
|
|
Milling Cutter 4" dia 3/8" width
Square HSS milling cutter. With 1" arbour for horizontal milling machine. Used once and still in exellent condition with no chips. Other sizes available. Listed separately. Discount on postage for multiple items.
|
|
|
Pair of Milling Cutter 3" dia
Square HSS milling cutter.By Moore with 1" arbour for horizontal milling machine. Size 1/8" 3/32" Used once(possibly) and still in exellent clean condition with no chips. Other sizes available. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140747d17f2-0x106-
|
|
|
4" x 3/8" x 1.25 bore Side & Face Mill Milling Cutter
ø4" x 3/8" x 1.25" bore High Speed Steel Milling Cutter Some light tarnish but otherwise in very good condition ~ sharp edge& corners Despatch is usually the same day or ONE WORKING DAY at the latest and I also post Saturday morning(last collection noon) PayPal Only ~ No Cheques or Postal Orders Postage(UK) FREE Postage(Overseas) at LESS than cost: Europe £3.50/ US& Can £6.22/ Australia £6.61 Will post to your PayPal confirmed/ gift address only NO EXCEPTIONS
|
|
|
8mm rippa end mill milling cutter coated
k-2 8mm rippa end mill milling cutter coated used once.Happy bidding
|
|
|
BRIDGEPORT SERIES 1 CNC R2E4 GREAT CNC MILL GREAT CONDITION
This is a 1985 Bridgeport SERIES 1 CNC R2E4 this machine came out of Long Beach College. CA this mill is like new. It has never been in production shop it came stright from the college to me, It comes with the computer the run your programs and download into the machine, Tooling and tooling cart come with the machine. It has a power air draw bar for easy in and out tool change the machine travels 18in X 12inY 5in Z the table is 34 x 12 this machne is so clean the ways are perfect the spindle is quiteit runs realy nice and smooth. Machine is sold as is no warranty buyer to pay for all shipping cost and rigging cost PH# 602-622-0784 Glen. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14074a982ce-0xf5-
|
|
|
Rothley Slotting/Keyway machine Slotter, Keyway, Key way, Keysetter,Broach
ROTHLEY SLOTTER Inclinable head: 30deg either side of square Stroke: 6”stroke position is variable) Front tool holder takes 1” x 1¼” tools Rotary Table: 15”360º marked at 5min intervals Movement: X’left/right) approx 265mm‘Y’in/out) approx 230mm Slotting head can be inclined to +/ 30º Strokes per min: 29– 124 On/off& Inch buttons Motor 3 phase x approx 3hp Any inspection is welcome. Please call oremail to make arrangements Loaded FOC with OTC on to your transport Curtain side& container trailers wouldneed to be/have removable/open tops Packing/securing/top removal. Labour,materials& costs to be met by purchaser Unused for the last 12 years(always keptinside) For sale else where so maybe removed at any time Cheque. Bank transfer or cash Any questions please call 01384 636683.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1407a01a7f3-0x100-
|
|
|
Mowhawk 2" Core Drill, Morse Taper 4
Mowhawk 2" Core Drill. Morse Taper 4 Code- 7D2 2000 1325 Used. Some surface Rust Sold as seen- No Returns No Reserve VAT is included in the price V279 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, as not all ... moregoods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
Fanuc A1F01A Interface Module A03B-0807-C011 - 99p No Reserve!
Fanuc A1F01A Interface Module A1F01A Type- A03B-0807-C011 No. N4408 1995 11 USED Sold as seen- No Returns No Reserve VAT is included in the price V273 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, as not all goods ... moreadvertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1407a01a9b2-0xf8-
|
|
|
RS 11 Pin Multifunction Timer 6Sec-6 Hr 110v - 99p No Reserve!!
RS 11 Pin Multifunction Timer 6Sec- 6 Hr 110V 11 Pin 6 sec- 6 hr. 110v 50HZ RS Number- 348- 453 Grubby Due To Storage Sold as seen- No Returns No Reserve VAT is included in the price V268 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 ... morehours must be given, as not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
Telemecanique 25-40 A Manual Motor Starter GV3-M40 -99p No Reserve!!
Telemecanique 25-40A Manual Motor Starter GV3-M40 GV3-M40 25-40A Used Sold as seen- No Returns No Reserve VAT is included in the price V266 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, as not all goods advertised ... moreare on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
Endecotts Laboratory Test Sieve B5410/1986 - 99p No Reserve!
Endecotts Laboratory Test Sieve Frame- Brass B5410/1986 Mesh Material- Stainless Steel Serial Number- 363397 Aperature 75um Used- Grubby from storage There is a number 5 marked on the frame in marker pen from previous owener Sold as seen- No Returns No Reserve VAT is included in the price V253 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call ... morethe office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must be given, as not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
Antique ALFRED HERBERT VERTICAL MILLING MACHINE PILLAR DRILL No.14 / Pat.165956
THIS IS A VERY RARE AND ANTIQUE EARLY EXAMPLE OF ALFRED HERBERTS TOOLING WHICH IS STILL RESPECTED AND RENOWNED TODAY- AS ANY HERBERT FAN WILL KNOW HE IS HARD TO FIND AT THE BEST OF TIMES ONLINE(AS IVE FOUND OUT LOOKING FOR THIS TODAY) SO IT WILL BE NO SURPRISE TO TELL YOU THAT I COULDNT FIND ONE LIKE THIS ANYWHERE ONLINE EITHER. IT SEEMS A VERY RARE PIECE. THIS IS STILL IN WORKING ORDER WITH ORIGINAL DRILL CHUCK AND BOLT SPANNER! c1900-1930 HAND PILLAR DRILL/VERTICAL MILLING MACHINE/HAND OPERATED DRILL TOOL GREEN AND RED WITH A LOVELY RED. YELLOW AND GREEN SPINDLE WHEEL PATENT NUMBER- 165956 MODEL NUMBER 14 HEIGHT 26" GENERAL WEAR AND TEAR AS TO BE EXPECTED- SEE PICS FOR EXACT CONDITION POST IS HIGH AS THIS IS A VERY VERY HEAVY PIECE AND I WILL ONLY SEND MY ITEMS VIA RECORDED AND INSURED DELIVERY- I WOULD RECOMMEND AND PREFER YOU ARRANGE ... moreYOUR OWN COLLECTION IF POSSIBLE(DOESNT HAVE TO BE IN PERSON) THIS WAY I CANNOT BE LIABLE FOR ANY LOSS OR DAMAGE ONCE IT LEAVES MY PREMISES AND IT WILL ALSO BE ALOT CHEAPER FOR YOU. PLEASE CONTACT ME FOR AN EXACT POSTAGE QUOTE IF YOU LIVE IN IRELAND AND SCOTLAND AS SOME AREAS DO DIFFER FROM THE SPECIFIED POSTAGE I HAVE STATED ON MY LISTING.
|
|
|
1 5/16" Slot Drill (EXCELLENT USED CONDITION) HSS Slotdrill 1 1/4" SHANK
1 5/16" Slot Drill. 1" 1/4 threaded shank HSS. Many other Shapes/Sizes Available From Stock Please Ask Powered by
|
|
|
Bridgeport (1993) VMC 760
DESCRIPTION Pre-Owned 1993 Bridgeport VMC 760 Serial Number: 20209 Mill being sold as is. Purchaser to pay for shipping. We can crate& load the machine on the truck for you. Maintenance& Operating Manuals Included GENERAL SPECIFICATIONS Table Size 39” X 19” Table Travels 30” X 20” X 20” Rapids X& Y Axis 1259” Min Z Axis 787” Min Spindle Taper#BT40 Spindle Speed Range 40- 6000 RPM Spindle Motor Power 11 KVA Tool Stations 16 Max Table Load 1323 Lbs Spindle Nose to Table Top 4” to 24” EQUIPPED WITH Heidenhain TNC 145 CNC Control 16 Station ATC Coolant Electrical Requirements 440/3/60 Approximate Overall Weight 8000 Lbs
|
|
|
SANDVIK HIGH SPEED CAPTO BORING HEAD C5-391.37B-12 070A (list over £1500)
EXCELLENT USED SANDVIK HIGH SPEED CAPTO BORING HEAD C5-391.37B-12 070A(list over £1500) WITH ADJUSTABLE COUNTERWEIGHT. CAPTO C5 COUPLING, BORING RANGE 3-26MM(WITH THE CORRECT BORING BAR) DIAMETER ADJUSTMENT 0.002MM, THROUGH TOOL COOLANT MAX ROTATION SPEED 20000 REV/MIN INCLUDES A SANDVIK BT40 C5 HOLDER C5-390.55-40 030(list over £200) + BORING BAR.
|
|
|
KEARNEY & TRECKER "S12" PLAIN HORIZONTAL MILL MDL#205S12 QUOTE # 26932
QUOTED 26932. 205S12 KEARNEY& TRECKER"S12" PLAIN HORIZONTAL MILL New 1973. Serial No 5373033, Model 205S12, Series S12 EQUIPPED WITH: Dual Round Overarm Lubrication System(2) Arbor Supports Plus Some Arbors Coolant System CATALOGUE SPECIFICATIONS: Table Dimensions(Overall) W x L. 12" x 56" Table Working Surface. W x L. 12" x 56" Table Longitudinal Travel(X-Axis) 28" Saddle In-Out Cross Travel(Z-Axis) 10" Knee Vertical Travel(Y-Axis) 18" Spindle Taper. 50 NSTD. 24) Spindle Speeds. Range. 25 to 2000 RPM. 16) Longitudinal and Cross Feeds. 1/4 to 32 IPM. 16) Vertical Feeds. Range. 1/8 to 16 IPM. Power Rapid Traverse. Long& Cross. 150 IPM. Power Rapid Traverse. Vertical. 75 IPM. Spindle Motor. Horsepower. 5 HP. Feed Motor. Horsepower. 1.5 HP. Weight. Approximately. 5600 LBS. PRICE: F.O.B. OUR ... moreWAREHOUSE. $5.950.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-140876f6ca2-0xf6-
|
|
|
Schaublin E25 Collet Chuck, MT 2 with 10mm Drawbar Thread. For Lathe or Miller.
Schaublin E25 Collet Chuck. MT 2 with 10mm Drawbar Thread. Nice Condition E25 Collet Chuck with a single 16mm Collet. With the addition of an ER25 Standard Nut this becomes an ER25 Collet Holder. Schaublin Quality still obvious after 20 years. This is a nice tool. Postage UK- £3.50 2nd Class. EU £6.00 Airmail the Rest of the World please ask. Happy for pick up but Cash on Collection Please if you do.
|
|
|
Hand Chasers Thread Chaser INTERNAL 7tpi / 7 tpi
Hand Chasers/ Machine Chasers/ Chaser 7tpi pitch good used condition one chaser only
|
|
|
Paxton / Patterson CNC Lathe Training Center, Check It Out -No Key AH*
On eBay for 16 years! We are a trusted seller with 100% feedback approval& high star ratings in all categories. We are honest in our listings. We ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Paxton/ Patterson CNC Lathe Training Center. This is in good used cosmetic condition. We received this from a school surplus. With out the key. It does not power on. It may be due to not having the master key but I am not sure. All of the manual turn cranks work just fine and move the axis smoothly. The ... morelid and mechanics all look to be in great used condition. There are ports for a pc and robotics in the back. We are not able to test this system. Item is sold as is. I am selling this unit as I have described it. Shipping cost is by freight truck. Please email for a quote. Include zipcode& if you have a forklift or loading dock or not. This unit is big and will need to be truck shipped on a pallet. You can pickup this equipment in Springfield. MO at no charge. Email me for accurate shipping quote. When you email please include your zipcode. Commercial or residential address(home businesses do not qualify as commercial address) and if you have a loading dock or forklift. I do some travel in the Midwest for possible delivery for a fee. Contact me to find out where I will be traveling over the next few weeks. I get discounts thru several different trucklines and will pass that onto you. There is a $25 packing charge for materials and time to pack this on a pallet(I pad, box, shrinkwrap and band to a pallet) I pack the item(s) well. Insurance is included. Buyer pays shipping. Items are insured for their purchase price. Payment due within 3 business days of auction end. Unpaid i
|
|
|
Tree VMC 1260, 32 TOOL ATC, 2100 control, runs $19,500 no reserve, CTS, chiller
This is a Tree 1260 32 tool automatic tool changer equipped vertical machning center. Specs below are from another machine that is similar. Please confirm specs for yourself. It has a chip conveyor. A coolant through the spindle unit and all the leveling hardware and manuals. It has a bad place in the table where a T nut pulled out. You can come to see it before the auction closes(central KY) Item is listed"as is" I will answer any questions I can. We're not real familiar with the control so contact with questions. It runs and is under power. I have a video of the spindle running and tool changes and movement. It was a trade in machine. TREE Model VMC-1260 E Serial number VMC 1260/32E2 Vertical Machining Center Control Acramatic 2100- PC Based- Table Size 57" x 23.2" Maximum Table Load 3.000 lbs. X" axis Travel ... more50" Y" Axis Travel 24" Z" Axis Travel 30" Spindle Taper Cat. 50- Spindle Motor 30 HP- Spindle RPM 5.000- Tool Changer 32 Position twin Carosel- Machine Dimensions 126" x 85" 130" high- Machine weight 19.000 lbs- Coolant Capacity 100 gals Equipped With: Twin Carosel Tool Changer = 32 tools- 50 taper- G-code and conversational programming- Coolant system
|
|
|
Atlas horizontal milling machine gear cover/door with speed chart
Atlas horizontal milling machine gear cover/door with speed chart.Good condition.
|
|
|
KIA KH-40B HORIZONTAL MACHINING CENTER
USED KIA KH-40B HORIZONTAL MACHINING CENTER Year 1994. Serial#KHB40030_ This is an auction for a used KIA KH-40B Horizontal CNC machine. It is complete with a full Fanuc system. The machine is in working condition but does have a pallet change issue. SPECIFICATIONS: Pallet Size: 15.7 Travel: X Axis: 21.65 Z Axis: 19" Y Axis: 19" Pallet Index: 1 Degree Spindle Speed: 30-6000 RPM Spindle Taper: cat 40 Spindle Motor: 10 HP Spindle Center to Table Top: 1.4" 20.2" Spindle Nose to Table Center: 6.7" 25.6" ATC: 50 Tools Rapid Traverse Rate: 630 IPM Tool Change Time: 6- 9 Seconds Pallet Change: 18.5 Seconds Pallet Load Cap: 880 LBS Max Tool Diameter: 6.3" Max Tool Length: 12" Max Tool Weight: 22 LBS COMPLETE WITH: FANUC 15M CNC CONTROL 9" MONOCHROME CRT 50 TOOL MAGAZINE CHIP AUGER HEAVY DUTY BOX WAY CONSTRUCTION ... moreBUYER MUST PAY FOR SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-140a232bd2b-0x106-
|
|
|
Grizzly G0704 Milling Machine with Tooling
I have a Grizzly G0704 that I purchased in May of 2012. I have barely used it at all since I went off to college the following August and haven't returned since. I have put less than 10 hours on this machine. I was planning on converting it to a CNC mill, but I simply don't have enough money to justify owning this machine anymore. It is in perfect working condition, the axis lock handles are not adjusted and therefore do not work, but some simple adjusting should fix that. I used lapping compound to lap the ways, helping to improve the accuracy. It has been stored in a climate-controlled garage for the last year. Most of the dirt in the pictures is from a piece of wood that I milled, the wood stuck to the oil on the vise and the machine making it looks much dirtier than it actually is. I also built an enclosure to keep chips from ... moreflying behind the machine, it worked extremely well and the mill can come with or without the enclosure. I had planned on painting the wood with outdoor paint and using coolant in the machine, that was another reason I built the enclosure. The mill specifications are Motor: 1 HP. 110V, 3.2A, single-phase, Spindle taper: R-8, Spindle travel: 2" T-slots: 3@ 2-1/2" centers. 1/2" wide, Head travel: 11" Head tilt: 90° L/R, Max. distance spindle to table: 13" Swing: 15" Table travel(longitudinal) 18-7/8" Table travel(cross) 6-7/8" Table size: 7-1/16" x 26-5/8" Spindle Speed: 50–2250 RPM, And features Dovetail column, Safety shut off switch, DRO on spindle, Fine feed head control, 2-Speed gearbox, Clear guard on spindle, Rubber chip guards on ways, Zero setting dials, Dials read inches, Forward/Reverse switch, Stand with chip tray and cabinet measures 16" L x 16" W x 31" H, The machine comes with the basic tools needed to assemble and disassemble it. Including a 8, 10, 12, and 14mm wrench, a drawbar tool to release the collet from the spindle, two extra t-slot clamps, an extra axis lock handle, an extra handwheel hand
|
|
|
NICE!! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE - #CH-10M
aims NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Chung Hsiwh Industrial Co. Ltd. This is a Variable Speed Mini Vertical Milling Machine in GREAT condition. Model# CH-10M Serial# 2203 Specifications: Table: Surface Area: 15-1/4" x 3-3/4" T-Slots: 3@ 1-1/8" centers T-Slot Sizes: 15/32" Travels: X-Axis: 9" Y-Axis: 4" Z-Axis: 8" Spindle: Quill Diameter: 1.56" Spindle Taper: 3 Morse Taper Spindle Center to Back Column: 6" Spindle/ Column Tilt: 45- 0- 45 degrees Spindle Nose to Table: 1/2" minimum/ 11" maximum Spindle Speed Range: 200- 3.000 rpm. Capacities: Drilling Capacity: 1/2" End Mill Capacity: 1/2" Face Mill Capacity: 3/4" General: Motor: ... more500 Watt. 90 VDC, 4,000 rpm, 7.5 Amp, 50/ 60 Hz, Single Phase Electrical: 110 Volt. Single Phase Overall Dimensions: 18" x 17" x 33" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M NICE! CHUNG HSIWH VARIABLE SPEED MINI VERTICAL MILLING MACHINE- CH-10M Reliable Tool I
|
|
|
Lagun Vertical Multiaxis CNC Mill machine with Proto Trak AGE2 and MX2 Monitor
Fully functional Lagun FTV-2 CNC Mill with 4" Riser block and Kurt Power Drawbar with Prototrak AGE2 control with MX2 Monitor. All in great condition and fully operational. We ahve new Haas and Prototrak CNC mills and lathes. Flow International CNC waterjet, Betenbender shears and brakes, Scotchman ironworkers and coldsaws, and HE&M saws and just do not have the room for this machine. Lovingly restored by Veterans of the U.S. Armed Forces to support Workshops for Warriors and their mission to train. Certify, and place Veterans and Wounded Warriors into manufacturing careers. 100% of all profits go to support Workshops for Warriors. Please visit them at Video of Machine in Operation Video of Digital Readout in Z in operation Video of Digital Readout in X in operation Video of Digital Readout in Y in operation If paying by AMEX. A ... more3% handling fee will be charged. Forklift available onsite and we will load for $100 onto your flatbed or trailer(up to 1 hour) Local pickup is encouraged. But we will crate and ship anywhere in the world. The machine weighs roughly 2.500 pounds and measures(without a crate) 96" tall by 72" wide by 72" deep. Due to the number of requests for quotes, we cannot provide shipping quotes expect to the winning buyer. Locals are welcome to arrange for a viewing on Friday the 30th of August or Saturday the 31th of August. No questions asked 14 day return policy with shipping and crating charges paid for by the buyer. Machine must be returned in the same condition it was sent out. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Brown and Sharpe dynamaster 203 horizontal mill milling machine
1960's Brown and Sharpe Dynamaster 203 horizontal milling machine. Looks better in person. Works flawlessly, travels with feed in all axis. Purchased 2 years ago to produce custom H Pitch Pulley stock for prototyping. Has been oiled every so often in a climate controlled shop, but not used in the last 6 months. The machine is still set up for for cutting H pitch pulley stock and will sell it"as pictured" for an extra cost. Recently rebuilt Indexing table with like new Buck Chuck(purchased new for this application) can be left on since it is dial indicated for precision along with the dead center for the extra cost(along with a new cutter. If the buy it now is used, Machine will come as Pictured. Coolant pump was just rebuilt, so this machine is ready to produce for years in its new home. If buy it now is not used, Item will ... moresell with everything except what is mounted to the table and the cutter. 1 1/4" arbor included. Item can be seen under power at my shop in Joliet, IL. Please call Mike at 708 932 6636 to set up an appointment.
|
|
|
ENSHU 650 VX CNC VERTICAL MACHINING CENTER
ENSHU 650VX/ YAZNAC. TOMATO CONVERSATIONAL CONTROL, EQUIPPED WITH RENISHAW PROBE, CAT50 6000 RPM SPINDLE, 20 HP GEARED HEAD, BOXED WAYS, 30 ATC, CURRENTLY UNDER POWER AND IN USE- THIS MACHINE IS IN GOOD CONDITION AND HOLDS CLOSE TOLERANCE. MACHINE IS SOLD AS IS, WE OFFER NO WARRANTY OR RETURNS. PAYMENT MUST BE RECEIVED WITHIN 5 DAYS OF PURCHASE. MACHINE WILL NOT SHIP UNTIL FULL PAYMENT IS RECEIVED. NOTE: SHIPPING. PACKAGING, RIGGING IS THE RESPONSIBILITY OF THE BUYER. BUYER MUST REMOVE MACHINE FROM PREMISES WITHIN 3 DAYS OF CLEARED PAYMENT. MACHINE IS LOCATED IN YORKTOWN, VIRGINIA. SELLER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE INCURRED DURING REMOVAL OR TRANSIT.
|
|
|
USED COLD PLANER ( CONEQTEC UNIVERSAL AP III 1000 HIGH FLOW )
USED CONEQTEC UNIVERSAL AP III 1000* Still in work order* Open-drum design. Front access door, High pic count outside drum plates* Center-pivot design. Front down design, High torque direct-drive design* AP 1000: Cutting width 40' Cutting depth 6' Tilt capability right or left 7 1/2 deg Side shift travel 24' Minimum HYD. HP 70, Maximum HYD. HP permissible Flow Hi. Teeth 108* Applications: Large milling projects. Parking lot repair, Asphalt overlay projects, Municipal projects* LOCAL PICKUP ONLY( CAN HELP LOAD) 8709 Fingerboard Road Frederick. MD 21704( But if you use GPS house# is 8635* Price $ 12.000.00 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-140a5763c35-0xfc-
|
|
|
Wells Index CNC Vertical - CENTROID 4-axis CNC Control
Wells index knee mill. Recent Centroid CNC retrofit with all new motors and electrics. Comes with Hoffman rotary table with full 4th axis. Also 12 tool holders from Universal 200 featuring quick change. Centroid control features ease of use and has a remote jog handle. This well done retrofit was done by Machines in Motion here in OC California and features a fully programmable spindle drive with a low and high gear. Inspection recommended. We can load on flat bed truck for no charge. Posted with Posted with
|
|
|
2005 EMCO CONCEPT MILL 55 CNC VERTICAL MILL WITH BASE CABINET
2005 EMCO CONCEPT 55 VERTICAL CNC MILL S/N F1FV00; F1FT4903"IMPORTANT" Do not know running condition. Selling AS-IS, Came out of a Technical School that was hit by a Tornado and we bought this machine from the insurance company. See Description Below For Information. Please feel free to come and inspect in person. Call for appointment and directions to our warehouse. Contact: Don Lewis 805-427-4287 See Specs Below. Reasonable offers considered! To go to the EMCO Website: See the descriptions and features below PRELIMINARY SPECIFICATIONS- SUBJECT TO VERIFICATION: X-AXIS: 190mm Y-AXIS: 140mm Z-AXIS: 190mm TABLE SIZE: 16" x 5" TABLE CLAMPING SURFACE: 420mm X 125mm MAXIMUM TABLE LOAD CAPACITY: 10kg TOOL HOLDER: SK30 SPINDLE SPEEDS: 150-3500 RPM SPINDLE MOTOR: 0.75kw CONTROL: GE FANUC 21 EQUIPPED WITH: BASE CABINET MISCELLANEOUS ... moreTOOLING DIMENSIONS(APPROXIMATE) L-R 70" x F-B 69" X 70" HIGH APPROXIMATE WEIGHT: 500 LBS. INSPECTIONS: Please feel free to call me to inspect and/or discuss anything you cannot see in the photos. Ask for Don 805-427-4287 Also we encourage you to come and inspect this machine in person. Please call for appointment. KEEP SCROLLING DOWN TO SEE ALL(15) PHOTOS! To get a better idea of what the item really looks like please CLICK on the photos at the right to get a LARGER. Clearer view Shipping Arrangements: Let us know if you need a freight quote and we can put you in contact with a company that can quote a freight rate. If you plan to export we can provide you information for ocean freight services. If you pick the item up at our warehouse location in Ventura. CA We will load for FREE(Open Deck Trailers Only) You can use the listed dimensions and weights to figure your own shipping arrangements as well. And we will be very accommodating to the best of our ability to keep your shipping costs to a minimum. TERMS: Item sold Subject to Prior Sale. As-Is F.O.B. Ventura, CA. Sales Tax will apply to items sold to buyers who take delivery in California. additional charge
|
|
|
1995 SuperMax, 2 Axes CNC Knee Type Vert. Milling Machine, CNC-20 Control
This Machine was Built New in 1995. It Runs as Good as it Looks. Can be used as a(2) axes CNC vertical milling machine or as a conventional vertical milling machine. Now for sale and available for your inspection at our warehouse in beautiful downtown Miamisburg. Ohio is this"EXCELLENT" SuperMax Model YCM-40, Vertical Knee Type. CNC Milling Machine complete with a SuperMax. 2 Axes Conversational or G-Code CNC Controller S/N 503678. You just can't go wrong with this machine. This machine tool was built in Tiawan by one of that countries premier machine tool builders. The 2 Axes CNC controller is the very desirable SuperMax CNC-20 with Conversational or G-Code. The table does have a half a dozen operator errors. Other than that. The condition is SUPER. Specifications for this machine are as follows: Spindle Drive Motor: 3HP Spindle ... moreSpeeds: 60 RPM to 4.200 RPM, Infinately Variable Table Size: 9" X 49" Longitudinal Travel(X axis) 37" Cross Travel(Y axis) 16" Knee Vertical Travel(Z axis) 5" + 16" Knee Travel Ways: Box Ways. Hard Chromed and Ground Spindle Taper: R-8 Quill Power Feeds: 0015" 003" 006" Quill Travel: 5" Maximum Table Load: 580# Overarm Travel: 19" Weight of Machine: 2.400# Accessaries include: Manuals. Auto Oiler* We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for long
|
|
|
1999 Okuma Cadet Mate 4020 w/ OSP 700M Control
OKUMA CADET MATE VERTICAL MACHINING CENTER NEW: 1999/ MODEL: CADET-MATE SPECIFICATIONS TRAVELS X-AXIS: 40” Y-AXIS: 20” Z-AXIS: 20” SPINDLE END TO TABLE SURFACE: 7.8” 27.8” SPINDLE CENTER TO COLUMN FRONT SURFACE: 20” TABLE SIZE: 47.24” X 20.08” EFFECTIVE SIZE: 40” X 20” LOAD CAPACITY: 1.500 LBS SPINDLE TAPER HOLE: NT#40 DIAMETER(FRONT BEARING) 2.76” OD TORQUE(MAXIMUM) 51.3 LBS/FT SPEED RANGE: 40– 8.000 RPM FEEDRATES RAPID TRAVERSE X/Y& Z AXES: 787 IPM FEEDRATE X/Y/Z AXES: 01– 314 IPM MOTORS MAIN MOTOR: 15/7.5 HP(10 MIN/ CONT) X& Y AXIS BRUSHLESS DRIVE MOTOR: 2.72 HP Z AXIS BRUSHLESS DRIVE MOTOR: 5.45 HP THRUST X. Y: 1.360 LBS THRUST Z: 2.700 LBS ATC TOOL CHANGE SPEED(TOOL TO TOOL) 6 SECONDS TOOL MAGAZINE CAPACITY: 20 TOOLS TOOL SHANK: CAT 40 PULL STUD: CAT STD MAXIMUM TOOL DIAMETER W/ADJACENT TOOLS: 3.54” MAXIMUM TOOL DIAMETER W/O ... moreADJACENT TOOLS: 6.29” MAXIMUM TOOL LENGTH: 11.8” MAXIMUM TOOL WEIGHT: 17.6 LBS. GENERAL MACHINE HEIGHT: 113.6” FLOOR SPACE REQUIRED: 162” X 135” MACHINE WEIGHT: 10.000 LBS. ELECTRICS: 220 VOLTS. 3 PH, 60 CYC EQUIPPED WITH OKUMA OSP700M CNC CONTROL COLOR DISPLAY. FLOPPY DRIVE, GRAPHICS, ANIMATION, HELICAL, RIGID TAPPING BOX WAYS If you have any questions please contact us at 866-803-5202 or 714-892-9800 If you need a shipping quote please contact Tim at Abba Freight 866-779-9350 or tims@abbafreight.net
|
|
|
LEADWELL CNC MILL M50 MITSUBISHI CONTROL FOR EDM, LATH, BRIDGPORT MILL SHOPS !!!
NICE! LEADWELL CNC MACHINE with MELDAS M50 MITSUBISHI control and Mitsubishi closed loop AC servo motors and Drives. Machine is in great condition and is a heavy duty BOX WAY Machine. Travel(X Y Z) 31 x 14 x 6 inch Max dis from table to spindle nose: 17.5" RS-232 port DNC 99 tool offset High& low gear 5 HP Spindle motor FANUC compatible G-codes optional stop skip line work offset coolant pump and tank MPG hand wheel power Drawbar CAT 40 Spindle other features.
|
|
|
4 X ITC End Mills - 4 off 20mm 2 flute (USED)
4 X ITC End Mills- 4 off 20mm 2 flute(USED) Up for auction are these 4 off ITC End Mills There are 4 off 20mm dia x 2 flute These have been used and have chips on the cutting edges But a good regrind would bring these back to life The picture shows 6 but there is only 4 an old picture used
|
|
|
41mm Sandvik Coromant U Drill 880-D4100L40-02 880 U Drill Used 2D 40mm
40mm U Drill Sandvik Coromant 880-D4000L40-02 2D Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
25mm Sandvik Coromant U Drill 880-D2500L25-02 880 U Drill Used 2D 25mm
25mm U Drill Sandvik Coromant 880-D2500L25-02 2D Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
Milling Vice. 6" wide X 6" holding. Quick Release
Quick Release Milling Vice. 6" 150 mm) over jaws. Opens to 6" work capacity. Some usual marks on jaws but in overall good condition. Comes with handle and two bolt on flats(see pic) two clamping holes for quick location on Milling machine/Drill bed. Collection from Taunton or courier to Mainland UK as priced.
|
|
|
Emcomat 7 - 4 Speed Geared Milling Head & Collumn - 3 Phase 1/3 HP Motor
Emcomat 7- 4 Speed Geared Milling Head& Collumn- 3 Phase 1/3 HP Motor Emco milling Head as fitted to all Emco machines from the Emcomat 7 to the V10P and a lot more information can be gained from a visit to lathes.co.uk. This Head has been in use fitted to the overarm of my Astra Horizontal Mill as the Vertical Milling element and has given great service for several years but now time to move on so it has been re-united with its collumn. Although the Quill Drilling Lever is missing( the correct size offset ring spanner was used) it is in good order except for two cracks in the motor casing. These were there when I bought the machine and have not caused any problems at all. The previous owner couldn't remember when they appeared, shown in the last 4 photos. All Gears work and there are no broken internal Gear Change Levers although ... moreone of the external gear paddles had to be replaced. The motor is the 1/3 HP 3 Phase Type and has proved a very capable machine. Postage may be a problem as the unit weighs over 30 Kg but splitting into two parcels may be the way. The postage quoted will take this into account. Postage UK- £30.00 2nd Class. EU £75.00 Airmail the Rest of the World please ask. Happy for pick up but Cash on Collection Please if you do. On 17-Aug-13 at 13:39:02 BST. Seller added the following information: Click to view supersize image On 17-Aug-13 at 13:53:39 BST. Seller added the following information: I have added an old picture of the head in place on the Astra Milling machine. With the spanner drilling lever replacement as mentioned, all that was needed was a mounting ring bolted to the end face, this was copied from the mount on the collumn. This set up vastly improved the use of the machine and proved a fine replacement for the Astra Vertical Quill Head which are impossible to find.
|
|
|
Bridgeport Vertical Milling Machine Great Condition W/Graymills Pumping System
BRIDGEPORT VERTICAL MILL GREAT CONDITION For most late-model machines the Model 2J2 was the"Standard" head offered for the Series 1. It had a 2 hp. 1.5 kW) motor driving an expanding and contracting pulley system. Incorporating a lathe-like"backgear" to give infinitely variable speeds from 50 to 3750 rpm. Like all Bridgeport heads the quill was hard-chrome plated. Ground and then lapped to fit the honed bore in the main casing. The handles of both the quick-action drilling(sensitive" and wheel operated fine-feed were detachable and three rates of power down(and up) feed provided. The spindle was fitted with a brake- to slow it rapidly from high speeds- that could also be positively locked to aid tool changes; a clutch. Designed to slip in overload conditions, protected the spindle from damage. As a point of interest ... more3 different lengths of drawbar were used on the 2J2 head: 19.5" 23.5" and 26.5" so, if the one with your newly-acquired machine doesn't fit, now you'll know you know FOR MORE INFO CALL 214-943-5583
|
|
|
SECODEX 16mm BALL NOSE CARBIDE INSERT MILLING CUTTER
Secodex 16mm ball nose carbide insert milling cutter No R218.19-2016.4-17 Shank 20mm x 65mm overall length 100mm Will post world wide Recycled packaging always used if possible After receiving payment i will post A.S.A.P. work permitting.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140a5947598-0xfc-
|
|
|
20mm U Drill 4D USED, In Very Good Condition
20mm U Drill 4D.200.R.03 Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
21mm U Drill 4D USED, In Very Good Condition
21mm U Drill 4D.210.R.03 Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
25mm U Drill 4D USED, In Very Good Condition
25mm U Drill 4D.250.R.05 Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
20mm U Drill 3D USED, In Very Good Condition
20mm U Drill TDC 20030R 3D THIS U DRILL TAKES WCMX 030208 INSERTS. Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
20mm U Drill 3D 200.R.03 Used
20mm U Drill 3D.200.R.03 Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
19mm Iscar U Drill DR190-035-25-06-2D-N Used U Drill
19mm U Drill 38mm Flute Length Iscar DR190-038-25-06-2D-N Used Got various sizes available in used condition some Sandvik. Iscar, Korea Technics etc! Message me if you require different sizes will list them on eBay for you. If you require anymore sizes or any questions please don't hesitate to contact us on m.a.tooling@hotmail.co.uk or 07789790100 Check out my other items. We also buy surplus engineering tools and equipment. Large quantities or Small! Posted with
|
|
|
1992 MAZAK MT-V-414 VMC CNC - Needs Repair - NO RESERVE
1992 Mazak MT-V-414 Serial Number: 104801 M32 Control X 22" Y 16" Z 18" Cat 40 Spindle 22 Tool ATC For Parts or Repair. Machine worked fine. Then got an alarm, 310- Tool Holder Sol. All off Malf. We do not have time to fix and need shop floor space as we just bought two NEW Haas VF-1's. This is the only Mazak we have in a Haas shop. Includes all manuals. Parameters are in the manual as well as Hard Loaded in the machines EPROM. EPROM does match serial number. Buyer is responsible for rigging. I recommed Beyel Bros, They will give a good price. Buyer is also responsible for transport. 110" L x 84" W x 96" H 11.550 Pounds NO RESERVE- Please ask all questions before bidding- SOLD AS IS. NO WARRANTY OR RETURNS. Must be removed within 12 days of winning auction. On Aug-20-13 at 07:44:30 PDT. Seller added the following ... moreinformation: Ships from West Palm Beach. Fl 33407
|
|
|
Supermax YCM-40 3 axis CNC knee mill with tool holders and spare drives
Supermax YCM-40 3 axis 9"x49" CNC knee mill with power draw bar.Tool holders,spare servo drives, Allen Bradley Bandit IV control, Kurt D-675 vise(nearly new)original Supermax machine and programing manual, Allen Bradley manual and wiring info and two spare servo drives, assorted tool holders(no cutting tools pictured are included)Box ways replaced upper pulley bearing on 8/22/13 axis travels x-28" y-15.5 z-5.5" control has a 99 tool and fixture library g-code and m-code programming with canned cycles. Program dry run teach and digitizing and more motor and variable speed are smooth and quiet and axis' are smooth and accurate This machine is under power and ready for inspection This is has been a personal machine for the last 5 years and as such has not seen any production work in that time I had the PLC boards shipped ... moreto the original machine builder and verified in working condition installed new power supply 5yrs ago and a new servo drive If you prefer you may call john at 262-620-3166 anytime machine is located in Kenosha Wi 53140 and can be shown by appointment only machine weight is approx. 3000lbs I am not a professional machine dealer this is my personal machine. And is sold as is where is(shipping could be arranged anywhere between 53140 and Texas at additional cost) Machine is for sale locally and may be withdrawn at any time any accepted offers will require an immediate deposit of 500.00 and be picked up or the balance paid within 3 business days or the balance due in full before shipping within 5 days by certified check. Wire transfer,or as always cash. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-140adadf42c-0x107-
|
|
|
EXCEL #510-COLT CNC VERTICAL MACHINING CENTER
aims EXCEL#510-COLT CNC VERTICAL MACHINING CENTER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Excel Machine Tools. This is a used CNC Vertical Machining Center in GREAT condition. Model# 510-COLT Serial# ES789130 Date of Manufacture: believed to be 1990 Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Features: Fanuc Series O-M Control. 16-Position Automatic Tool Changer. Coolant System. RS-232 Port. CAT40. 6,000 RPM spindle. Specifications: Table: Table Working Surface Area: 27.56" x 16.54" T-Slots: 3@ 5" centers. Travels: X-Axis: 20.08" Y-Axis: 16.14" Z-Axis: 18.11" Spindle: Distance Between Table Top Surface and Spindle Nose(minimum/ maximum) 5.31" 23.43" Distance ... moreBetween Column Ways and Spindle Center: 16.14" Spindle Taper: CAT40 Spindle Speed Command: 1 RPM(directly programmable by 5-digit S code) Spindle Speeds Range: 150 to 6.000 RPM. Movement Rates: X and Y Axes Rapid Traverse Rate: 708.66 ipm Z-Axis Rapid Traverse Rate: 551.18 ipm Cutting Feed Rate: 0.004 to 157 ipm. Automatic Tool Changer: Tool Selection System: Random Bi-Directional Number of Tool Positions: 16 Maximum Tool Diameter: 3.74" 5.91" when the next position is empty) Maximum Tool Length: 9.65" Maximum Tool Weight: 13.2 lbs. 123.5 lbs total) General: Electrical: 220 Volt. Three Phase Overall Dimensions: 77" x 98" x 105" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. EXCEL#510-COLT CNC VERTICAL MACHINING CENTER EXCEL#510-COLT CNC VERTICAL MACHINING CENTER EXCEL#510-COLT CNC VERTICAL MACHINING CENTER EXCEL#510-COLT CNC VERTICAL MACHINING CENTER EXCEL#510-COLT CNC VERTIC
|
|
|
1995! BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE - EZ-TRAK DX CONTROL
aims 1995! BRIDGEPORT EZ-TRAK 2-AXIS CNC MILLING MACHINE- EZ-TRAK DX CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Bridgeport Machines Inc. of Bridgeport. Connecticut. This is a used EZ-TRAK 2-Axis CNC Milling Machine in GREAT condition. Model# EZ-TRAK Serial# BR268124E Date of Manufacture: 1995 Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Here is some information from Bridgeport: This is the EZ-TRAK CNC Milling Machine. Combine the Series I with an easy-to-use control. And you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its three-axis control has a fully adjustable, flat screen Monitor that prompts for all machining data and signals the operator ... morewhen an action is required. The control can store up to 1.000 operations. The EZ TRAK also features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways with covers and a centralized, one shot lubrication system ensure a long machine life. Features: Rigid. One-Piece Column and Base Integrally Cast with Added Ribs. Hard Chrome-Plated Quill. Proven resale value! High demand caused many used Series I standards to sell for more than their original purchase price. Versatile-totally interchangeable parts. You choice of a full line of high productivity accessories and heads. Full support. Bridgeport stands behind every machine with nationwide parts and service. And application engineering support. Patented flow-through air cooling on 2J head prolongs bearing life and prevents expansion caused by heat build-up. Secure tools from 1/8" to 3/4" in a R8 collet. A quick adjustment micrometer nut allows rapid adjustment of the quill for long moves and can also be adjusted for fine positioning of.001" Sturdy. Coreless cast table, heavily ribbed for strength. Precision ways on c
|
|
|
USED HAAS VF-0B CNC VERTICAL MACHINING CENTER
1) USED HAAS VF-0B CNC VERTICAL MACHINING CENTER NEW 2001 SPECIFICATIONS: TABLE SIZE.26" x 14" MAX. TABLE LOAD(EVENLY DIST.3000 LBS SPINDLE NOSE TO TABLE TOP.4" 24" X AXIS TRAVEL.20" Y AXIS TRAVEL.16" Z AXIS TRAVEL.20" RAPID TRAVERSE RATE ALL AXES.710 IPM CUTTING FEED RATE ALL AXES.0.1- 300 IPM SPINDLE SPEEDS.7.500 RPM SPINDLE TAPER.CAT 40 SPINDLE MOTOR.15 HP TOOL CHANGER CAPACITY.20 STATIONS MAX. TOOL WEIGHT.12 LBS APPROX. DIMENSIONS.88" x 93" x 106"H APPROX. WEIGHT.8500 LBS EQUIPPED WITH: HAAS CNC CONTROL For more information call Dean at 888-998-4440!
|
|
|
COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel
aims COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Comet Model# VMC-2100 CNC Vertical Machining Center with large 4th Axis Rotary Table and Right Angle Attachment. Large Capacity machine at a shop in the Orange County area. Good machine but just doesn't meet the need for owners's current jobs. Can be inspected under power by appointment. Please email richard@reliabletools.com. Running parts and can be demonstrated under power. Sold As Is. Buyer responsible for all moving. Loading and transportation. Specifications are to the best of our knowledge. Please inspect first hand. Specifications: Table size: 93" x 40" Travels: 81" x 41" 35.5" Taper: 50. Spindle speed: 5000 rpm. Main motor: ... more25 hp. Atc position: 22. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel COMET VMC 2100 CNC VERTICAL MACHINING CENTER 81" X Travel Reliable Tool Inc. c 2011 | Powered by 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-140e4de6dc2-0xf1-
|
|
|
Milling/Drilling Machine ZAY 7032G
Milling/Drilling Machine ZAY 7032G. The Manufacturer's Description. Variable speed Milling. Drilling, tapping, boring and reaming Head swivels ±90° vertically Drilling Capacity===================32mm Max. boring dia.====================50mm Max face Mill capacity==============63mm End Mill capacity===================20mm Max distance spindle nose to table==400mm Min distance spindle axis to column=260mm NOTE: This machine is in very good condition. Unfortunately while unloading this our w/h staff broke the front rotary handle NOTE:STAND NOT INCLUDED Asset# 110796/BA. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. ... moreWe will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140e6380c9d-0xfc-
|
|
|
Bobcad/Cam V.21 with bridgeport floppy drive
Bobcad version 21 with all discs and training manual.Also have a bridgeport Floppy drive with cord and(2) power transformers.
|
|
|
OOYA RE-0M CNC VERTICAL MACHINING CENTER - YASNAC 3000G CONTROL
aims OOYA RE-0M CNC VERTICAL MACHINING CENTER- YASNAC 3000G CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Ooya Machinery Works CO. This is a used CNC Vertical Machining Center. The control has an alarm. And for this reason we are selling this machine AS-IS. We have not tested the machine further than this. This could be a very easy fix for someone with the time and knowledge of Yasnac controls. Model# RE-0M Serial# N81H-5709 Features: Yasnac 3000G CNC Control. 20-Station Automatic Tool Changer. 5.000 RPM Maximum Spindle Speed. BT40 Taper Spindle. 7.5 Horsepower Spindle Motor. RS-232 Port. Lube-Matic Lubrication System. Kanto Seiki Oilmatic Automatic Oil Temperature Regulator. Specifications: Table: Working Surface Area: 43.31" x 18.875" Overall Table Size: 37.75" ... morex 15" Maximum Table Load: 1.210 lbs. Travels: X-Axis: 31.5" Y-Axis: 15.75" Z-Axis: 16.75" Spindle: Spindle Taper: BT40 Spindle Speed Range: 50 to 5.000 rpm Distance from Spindle Center to Column Face: 18.5" Distance from Spindle Nose to Table Top: 4" minimum/ 20.625" maximum Motor: 7.5 Horsepower. Feedrates: Cutting Feedrate: 01 to 360 ipm Rapid Traverse(X& Y) 550 ipm Rapid Traverse(Z) 275 ipm. Tool Changer: Number of Tool Stations: 20. General: Electrical: 200/ 220 Volt. Three Phase Overall Dimensions of Pump: 28" x 17" x 29" tall Overall Dimensions of Oil Regulator: 16" x 23" x 24" tall Overall Dimensions: 100" x 90" x 115" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. OOYA RE-0M CNC VERTICAL MACHINING CENTER- YASNAC 3000G CONTROL OOYA RE-0M CNC VERTICAL MACHINING CENTER- YASNAC 3000G CONTROL OOYA RE-0M CNC VERTICAL
|
|
|
WELLS-INDEX 3 AXIS CNC MILL WITH CENTROID CONTROL
UP FOR BID IS A WELLS-INDEX 3 AXIS CNC MILL. MODEL# 520/CEN 5 WITH CENTROID CONTROL. SERIAL# 22788 240 VOLT PC CONSOLE MODEL# M400 PC CONSOLE SERIAL# 6309 THIS WAS A GOVERNMENT SURPLUS. IT LOOKS LIKE IT SAT IN A WAREHOUSE AND WAS USED VERY LITTLE. MAYBE JUST TESTING. WHEN IT WAS PACKED TO BE SHIPPED THE 3 TRAVEL MOTORS DID NOT MAKE IT ON THE PALLET WITH THE MACHINE. THIS SAME MACHINE IS CURRENTLY BEING MANUFACTURED AND THE MOTORS CAN BE BOUGHT FOR AROUND $2000-$2500 TOTAL. TABLE IS 10" X 48" MACHINE IS IN EXCELLENT CONDITION ORIGINAL AMOUNT PAID WAS $85956.00 BIDDING WILL START AT $3500 AND THERE IS NO RESERVE. THE MILL IS SECURED TO A PALLET AND CAN BE LOADED AT NO EXTRA CHARGE. SHIPPING WILL BE ARRANGED AFTER AUCTION IS COMPLETE. WE ALSO EXCEPT VISA/MASTERCARD.
|
|
|
HAAS VF-1 vertical machining center--excellent 2002 1/2
This auction is for one used 2002 HAAS VF-1 with 20HP Vector Dual Drive. It has rigid tapping. A 24 station side mount tool changer, and 4th axis capability. It also comes with 45+ tools consisting of the toolholders and collet chucks shown in the pictures.Also supplied with the machine are 2 6" kurt vices shown in the pictures. Cutting tools and collets do not come with it. It is used and in very good working condition. Machine is still very tight and will hold tight tolerances. Buyer pays for freight for machine, toolholders, and 2 kurt vices.FOR THOSE OF YOU WHO ARE E MAILING MY AS TO WHY WE ARE SELLING WITH 2 KURT VISES AND 40 TOOL HOLDERS,COLLET HOLDERS ETC-WE HAVE JUST BOUGHT 3 MORE HAAS MACHINES ALL WITH VISES AND ALL FULLY TOOLED-THIS MACHINE IS QUIET IN ALL AXIS AND SPINDLE IS QUIET-CUT MOSTLY ALUMINUN-NEVER CAST IRON OR GRAPHITE-OR ... moreANYTHING NASTY LIKE CAST IRON OR GRAPHITE-TAKE THE PRICE OF THE KURT VISES AND 40+TOOL HOLDERS AND SUBTRACT THAT FROM THE PRICE AND YOU WILL SEE THIS IS THE BEST DEAL ON EBAY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140f2104d27-0xf6-
|
|
|
Revolution Minuteman III Vertical Milling Machine CNC Mill - 7.5 HP/460V
SKU: 2359936 A: 0013000000CXCfg O: 0065000000NM48t PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Revolution Minuteman III Vertical Milling Machine CNC Mill- 7.5 HP/460V. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Revolution Model: Minuteman III Type: Vertical CNC Milling Machine Serial No: 972042 Mfg. Year: ... more1997 Features/Specifications: CNC control(type unknown) Travels: X-Axis: 39" Y-Axis: 18" Z-Axis: 20" Table Size: 54" x 12" 16" extension wings included(not installed) Marathon Electric Motor: 7.5 HP- 460V- 10.5A 1762 RPM- 60 Hz- 3 PH Spindle Taper: 40 Spindle Speed: 60-4200 RPM Figures are for 5 HP motor& are likely higher performance w/7.5 HP motor Floppy disk/tape input EMS P5U-45P5 drive control KURT Power Lock unit Coolant pump Way oiler Dimensions& Weight: Machine: L 55" x W 75" x H 87" Shipping: L 70" x W 84" x H 95" as shown) Shipping Weight: 4.400 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular. Thorough maintenance performed by previous owner Note: Z-Axis servo motor has been disconnected by consignor for easier transport(see photo) Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-
|
|
|
HITACHI SEIKI VM40II CNC VERTICAL MACHINING CENTER - SEICOS MIII CONTROL
aims HITACHI SEIKI VM40II CNC VERTICAL MACHINING CENTER- SEICOS MIII CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by in Japan by Hitachi Seiki. This is a used CNC Vertical Machining Center. We had a technician come out. And go through the machine. He has told us that there is a fail alarm on the SPHC Board. The board needs to be either replaced or repaired. Hitachi Seiki does currently have this part in stock. You will need to reload the parameters after this board is changed. Also we have a PDF version of the Maintenance Manual for the Seicos MIII Control that will be given to the winning bidder. Model# VM40II Serial# 42838 To the best of my knowledge. The specifications I've provided are correct but please verify or inspect machine first hand. The machine can be inspected ... moreby appointment. Unit is being sold as is and our normal return policy does not apply. Features: Seicos MIII CNC Control. 20-Station Automatic Tool Changer. 8.000 RPM Maximum Spindle Speed. CAT40 Taper Spindle. 7.5 Horsepower Spindle Motor. RS-232 Port. Chip Auger. Coolant Pump. Pallet Changing System. Specifications: Palles: Working Surface Area: 30" x 15.75" Number of Pallets: 2. Travels: X-Axis: 22" Y-Axis: 16" Z-Axis: 18" Spindle: Spindle Taper: CAT40 Maximum Spindle Speed: 8.000 rpm Distance from Spindle Center to Column Face: 21.5" Motor: 7.5 Horsepower. Tool Changer: Number of Tool Stations: 20. General: Electrical: 200/ 220 Volt. Three Phase Overall Dimensions of Pallet Changer: 54" x 48" x 32" tall Overall Dimensions of VMC: 78" x 80" x 90" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HITACHI SEIKI VM40II CNC VERTICAL MACHINING CENTER
|
|
|
Bridgeport Series 1 2hp mill w/Anilam 2 axis dro
Bridgeport Series 1 2HP Mill Anilam 2 Axis dro Excellent Condition! Questions Call Steve@ 866-803-5202 Shipping Quotes Contact Table travel(X-Axis) 32" 914 mm) Saddle Travel(Y-Axis) 12" 305 mm) Quill Travel: 5" 127 mm) Knee Travel(Z-Axis) 16" 406 mm) Ram Travel: 12" 305 mm) Throat Distance(Min. 18.75" 476 mm) Throat Distance(Max. 6.75" 171 mm) WORKTABLE Standard: 42" x 9" 1245 x 299 mm) T Slot center distance: 3@ 2.5" 64 mm) centers T-Slot Size: 0.625" 16 mm) Height Above Floor(Max. 47.25" 1200 mm) Weight of Workpiece(Max. 750 lb(340 kg) Spindle(2J Head) Power Rating 30 min. Duty Cycle: 2 hp(2.2 kW) Power Rating Continuous: 2 hp(1.5 kW) Tooling: R-8 Collets Drilling Capacity Power Quill Feed 3: 3/4" Dia. 19 mm) Manual Drilling Capacity: 3/4" 19 mm) Mild Steel Boring Range: ... more6" 152 mm) Mild Steel Spindle Diameter: 1.875 in(48 mm) Quill Diameter: 3.375" 86 mm) Speed Range High(Infinitely Variable) 500-4200 rpm Low: 60- 500 rpm Power Quill Feed: 0.0015"rev(0.038 mm) Manual Adjust: 0.003"rev(0.076 mm) 0.006"rev(0.152 mm) MACHINE SIZE Floor Space: 8.2 x 5.3 ft(2.5 x 1.6 m) Machine height: 7.04 ft(2.15 m) Mass of Machine: 1950 lb(885 kg) 2095 lb(950 kg) Shipping)
|
|
|
ITALIAN MADE!! SAIMP 10" x 44" VERTICAL MILLING MACHINE - 8-SPEED
aims ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Italy by Saimp. This is a used Multiple Speed Vertical Milling Machine in GREAT condition. Model# FVO Serial# 0646 Features: Knee Power Feed. 8 Speeds(belt/pulley) 1/ 0.5 Horsepower Spindle Motor. Swivel Table. NMTB30 Spindle Taper. Coolant System. Specifications: Table: Overall Size: 44" x 10" T-slots: 3@ 2.5" centers T-slot Size: 9/16" Swivel Adjustment: 40 degrees L/R. Travels: Table Travel(X-Axis) 28" Saddle Travel(Y-Axis) 14" Knee Travel(Z-Axis) 18" Quill Travel: 5" Ram Travel: 12" approx. Spindle: Spindle Diameter: 2-3/4" Quill Diameter: 3-3/8" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: NMTB30 ... moreSpeeds(8)110 to 2.720 rpm. Head Adjustments: Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees. General: Motor: 1/ 0.5 Horsepower. 1,720/ 865 rpm, 220 Volt, 3/ 2.7 Amps Electrical: 220 Volt. Three Phase Overall Dimensions: 63" x 62" x 88" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITALIAN MADE! SAIMP 10" x 44" VERTICAL MILLING MACHINE- 8-SPEED ITAL
|
|
|
PRECISION MILLING MACHINE, DRO ON X, Y & QUILL, VISE, SWING-N-STOR X,Z FEEDS
PRECISION BRIDGEPORT TYPE MILLING MACHINE. MEISNER DRO ON THE X AND Y AXIS. MITUTOYO QUILL DRO. POWER FEEDS ON X AND Z AXIS. THE VISE IS INCLUDED, ALONG WITH A SWING-N-STORE TO STORE THE VISE TO ONE SIDE OF THE MACHINE AT TABLE HEIGHT(NO MORE LIFTING THAT VISE! THIS MILL WAS REMOVED IN GOOD RUNNING CONDITION BECAUSE IT WAS REPLACED WITH A LARGER MACHINE. WE WILL PALLETIZE AND LOAD THIS MACHINE AT NO ADDITIONAL CHARGE.
|
|
|
Good - 1" BSP - Pipe Tap - 11 TPI - looks to be unused!!!!
Good- 1" BSP- Pipe Tap- 11 TPI- this item is in Excellent Condition& looks to be unused!
|
|
|
TREE KIRA VMC-1 CNC VERTICAL MACHINING CENTER - FANUC SYSTEM 3M CONTROL
aims TREE KIRA VMC-1 CNC VERTICAL MACHINING CENTER- FANUC SYSTEM 3M CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Tree Kira. This is a used CNC Vertical Machining Center in GREAT condition. Model# VMC-1 Serial# 3M081 This VMC is currently coming out of a one-man shop whose owner has decided to retire. All of his equipment has been well maintained. And this machine is no exception. This is an older machine, but we are very impressed with the overall condition of this unit. As well as how it runs. It powers up and runs like a beast. Ready to be put right back to work. We here at Reliable Tools strive to provide you with quality equipment, at a fraction of the cost. So act fast because a deal like this won't last long. Features: Fanuc ... moreSystem 3M CNC Control. RS-232 Port. 16-Station Automatic Tool Changer. 8.000 RPM Maximum Spindle Speed. BT35 Taper Spindle. Showa Lubrication System. Oilcon AKS33K Oil Temperature Regulator. Coolant System. Specifications: Table: Working Surface Area: 28" x 15" T-Slots: 3@ 4" centers(0.675" Maximum Table Load: 550 lbs. Travels: X-Axis: 20" Y-Axis: 15" Z-Axis: 18" Spindle: Spindle Taper: BT35 Maximum Spindle Speed: 8.000 rpm Distance from Spindle Center to Column Face: 13.5" Tool Changer: Number of Tool Stations: 16. General: Electrical: 220 Volt. Three Phase Overall Dimensions: 72" x 88" x 100" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TREE KIRA VMC-1 CNC VERTICAL MACHINING CENTER- FANUC SYSTEM 3M CONTROL TREE KIRA VMC-1 CNC VERTICAL MACHINING CENTER- FANUC SYSTEM 3M CONTROL TREE KIRA VMC-1 CNC VERTICAL MACHINING CENTER- FANUC SYSTEM 3M CONTROL TREE KIR
|
|
|
Good - 3/8" BSP - Pipe Tap - 19 TPI - looks to be unused!!!!
Good- 3/8" BSP- Pipe Tap- 19 TPI- this item is in Excellent Condition& looks to be unused!
|
|
|
OPERATOR'S HANDBOOK FOR BOXFORD 8" SHAPING MACHINE
Operator's handbook for the Boxford 8" shaping machine A5 size. 16 pages Will post world wide Recycled packaging always used if possible After receiving payment i will post A.S.A.P. work permitting.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14101a18f93-0xf7-
|
|
|
PAIR OF ENGINEER`S VEE BLOCKS - LATHE - MILLING.
SIZE IS 3" BY 1 1/4" AND 2 1/2" HIGH.
|
|
|
10mm hss c08 end mill milling cutter 4fl long series
osg 10mm hss c08 end mill milling cutter 4fl long series 9.9mm diameter after refurb 4fl.Happy bidding o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-14101a18f7e-0xf6-
|
|
|
12mm solid carbide end mill milling cutter 2fl
itc 12mm solid carbide end mill milling cutter 11.65 diameter after refurb.5mm chamfer on cutting edge 2fl.Happy bidding
|
|
|
1993 Okuma Cadet Mate 4020 CNC Vertical Mill Machining With SMW Indexer
1993 Okuma Cadet Mate 4020 CNC Vertical Mill Machining With SMW Indexer Local pick up available at Orange. CA. Please contact us@ 714.639.9295 for any questions.
|
|
|
1994 Mazak FH-480
Mazak FH-480 MAZATROL M-32 CONTROL. 2) PALLET CHANGER RAPID TRAVERSE OF 1260 IPM 30 HP 12.000 RPM SPINDLE THROUGH THE SPINDLE COOLANT TRAVEL: X = 22.04" Y + 22.04" Z = 20.07" CAT 40 TAPER MAGAZINE CAPACITY 30 Manufacture Date 1994 FOB, Coffeyville. KS, Warranty, As Is. Where Is, No Warranty Implied, Condition, Used, VIDEO LINKS Specifications are Estimates and Subject to Change. Machine is fully operational and in service and can be viewed by appointment only. All prices are quoted FOB: seller's floor unless specified otherwise. STANDARD TERMS AND CONDITIONS OF SALE Machines are subject to seller’s terms& conditions below and notes: The goods sold are second hand goods and seller therefore makes no warranty of any kind. And sells goods“As is, As inspected, And“With all faults. And makes no warranty of any kind whatsoever, ... morespecifically any warranty of merchantability or fitness for a particular purpose. Seller disclaims any reliance by buyer on seller’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. Buyer acknowledges that specifications show are those provided by OEM and may have been altered or modified since original purchase. TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in OK are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale, will be re-listed. Payments by check will be held for 10 business days until check clears. Seller accepts money orders, bank checks, or wire transfers. SHIPPING; Customer Is Responsible For All Packaging.
|
|