|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States you get what you see except for the $1.used.clean.not engraved or damaged.nice scriber.base is 3 1/8 by 2 1/2 by 7/8 tall. Connecticut buyers to pay 6.35% ... moresales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Neoteck Magnetic Base Stand for Digital Dial Indicator Gauge 176lbs/80kg Max Pull - Black. Design: Flexible, sturdy, precise rotary joint, can adjust ... moreany direction and position, high stability. Flexible, sturdy, precise rotary joint, can adjust any direction and position, high stability.
Buy It Now
$9.00 Shipping Condition: Used Location: Peabody, United States Federal Pocket Surf Profilometer surface. Roughness gage which has only been used about a dozen times and is in perfect working condition. Model EMD-1500-311 ... moreComes with the case.9 volt battery already installed instruction manual. Foam lined carrying case. Riser Plate for calibrating the gage with the Reference Specimen is also included. Probe can be used in either 90 deg. 180deg. or 270deg. position. New this item is about $2600.00 at MSC Industial(Item# 66010034) Note see below for all specs. and instructions. Sorry but I can't seem to get all the pictures in the manual to print! 1 Instructions Portable Surface Roughness Gages Pocket Surf® MAHR GMBH. GERMANY • MAHR FEDERAL INC. USA 2 The Pocket Surf ® gage is a portable battery-powered instrument for checking surface roughness with the measured values displayed on a digital readout. The instrument can be used in the laboratory. An inspection area. In the shop, or wherever on-site surface roughness gaging is required. A Pocket Surf kit is furnished in a fitted case. And includes a Pocket Surf unit with a General Purpose Probe † and a 125m"3.2mm(nominal) Reference Specimen † plus: • EBY-1014 9-volt Alkaline Battery • EPL-1681 Riser Plate. For calibrating the gage with the Reference Specimen. † Part Numbers listed in “Models” table on next page. Description Even though this gage is designed and built to withstand the rigors of handling and use. It is a precision instrument and should be treated with care to assure measurement accuracy and reliable performance. Note: U.S. Patent No. 4.776,212 Product design and specifications subject to change without notice. Pocket Surf® is a registered trademark of Mahr Federal Inc. ®Mahr Federal Inc. 2000 3 Measuring Ranges. Ra — 1m" to 250m"0.03mm to 6,35mm Ry — 8m" to 999m"0.2mm to 25,3mm Rmax — 8m" to 999m"0.2mm to 25,3mm Rz — 8m" to 999m"0.2mm to 25,3mm Display R
$18.60 Shipping Condition: New Location: Clarks Summit, United States Introducing the Mitutoyo 547-252 Digital Depth Gage with a measuring range of 0-20mm. This precision instrument is perfect for accurately measuring the ... moredepth of any surface. The brand name Mitutoyo is synonymous with high-quality and reliability, which makes this depth gage an ideal addition to any professional or DIY tool kit. The gage type is specifically designed for depth and the digital display ensures that precise readings can be obtained with ease. This product is new and in excellent working condition, ready to be shipped to your doorstep. Don't miss out on the opportunity to add this impressive tool to your collection.Never used. It's the Metric version
Buy It Now
$5.87 Shipping Condition: Used Location: Oak Creek, United States The product is small in size and was made in the USA. Pic 9 Shows length of spindle/scriber.
Buy It Now
$9.49 Shipping Condition: Used Location: Sea Cliff, United States Works well! Condition: Nice overall shape! Works well.
Buy It Now
Free Shipping Condition: Used Location: Baldwin, United States This is a dial thickness gauge, designed to be used on a flat surface. It has no name on it or part numbers on it or the box. It appears new but I am ... morecalling it used. Works good. Max range .080, dial goes around twice. Shipping to lower 48 states only.
Buy It Now
$5.90 Shipping Condition: Used Location: Grand Bay, United States VINTAGE STARRETT NO 57S UNIVERSAL SURFACE GAGE SLEEVE. PLEASE E-MAIL ME WITH ANY QUESTIONS PRIOR TO BIDDING. ALL ITEMS ARE USED UNLESS OTHERWISE STATED ... moreAND WILL SHOW APPROPRIATE WEAR FOR THEIR AGE AND USE. ITEMS ARE SOLD IN AS IS AS FOUND CONDITION. SHIPPING TIMES STATED IN LISTING ARE APPROXIMATE AND CANNOT BE CONSTRUED AS DEFINITE SHIP BY DATES. ITEMS ARE SHIPPED USUALLY NEXT BUSINESS DAY AFTER RECEIPT OF PAYMENT. PAYMENT IS EXPECTED WITHIN 5 DAYS. BECAUSE ONE PERSONS VIEWS ON CONDITION VARY FROM ONE TO ANOTHER PLEASE VIEW PICTURES AND LISTING PRIOR TO BIDDING. PLEASE NOTE THAT LARGE AND OR HEAVY ITEMS WILL SHIP VIA UPS OR FED-EX. PLEASE E-MAIL ME PRIOR TO LEAVING FEEDBACK WITH ANY CONCERNS REGARDING MERCHANDISE. FEEDBACK DOESN'T SOLVE PROBLEMS BUT TALKING WILL. GOGOGO! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$15.70 Shipping Condition: Used Location: Lenhartsville, United States Patent 1896. Patent Mar 17, 1896.
Buy It Now
Free Shipping Condition: New Location: North Hollywood, United States And it is pocket size and lightweight, easy to use and carry. You can hang it on an inspection tool kit or other place to avoid losing it. 👷Thicken Design: ... moreMade of stainless steel, and through multiple processes, welding thickness gauge has thicken design, not easy to deform and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
$11.97 Shipping Condition: Used Location: Ashland, United States The Lufkin Rule Co. No.522 Scribing Block/Stand Surface Gage with Scribe This vintage tool is in very nice condition Check my feedback and bid/buy with ... moreconfidence
Buy It Now
$9.99 Shipping Condition: Used Location: Sea Cliff, United States This gage is in good condition. Made by LS Starrett USA #57S surface gage. Starrett 57S holder. 6", secondary extension is around 3".
Buy It Now
$8.95 Shipping Condition: New Location: Redford, United States 9-12" Square Base.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States MACHINIST UNIVERSAL SURFACE GAGE GAUGE 4 PINS 2 7/8 x 2 3/8*C Condition/I n fo: Good condition. Some rust stains. All my tool auctions come with satisfaction ... moreguarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 ... morefalse false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE In this auction is offered surface gauge from early machinist or toolmaker. This gauge has very nice. Sturdy design. It has 3" diameter base. Post is 8.5" long and 3/8" in dia. It comes with 2 heavy duty clamps. Weight is 2.6 pounds. There is no marking except letters AG on one clamp, and base has initials on it. Don't forget to check my other auctions. You may find something you like and I will gladly combine shipping. Thank you for stopping by. Normal 0 false false false EN-US X-NONE X-NONE- SHIPPING: All items are shipped via USPS. Priority mail comes with tracking information to check on the delivery status of your mailing. We ship next or not more than 2 business days after payment is cleared. International Shipping Policies Addendum: If not quoted at the end of auction. Bidder is to email me for exact shipping fee. Items will be shipped via USPS Priority Air Mail(this is the only service which comes with tracking information to follow the package) or economy priority flat rate and First class air mail(up to 4 pounds) All international sales are final, and no refunds, items sold as is. We will not be responsible for any international customs clearance. Duties, and taxes. Some countries are notoriously know for their slow or unreliable shipping service(Russia. Italy) We prefer to ship only registered priority to these countries. If you have any questions contact us. PAYMENT: Payment is to be received
$15.00 Shipping Condition: Used Location: Statesville, United States Item for sale is a Murkens Indicator Base. Surface Gage, Squareness Gage. Manufactured by Murkens Tool& Die in Meadville, PA for Herman Schmidt Item ... morewas purchased new and used by precision machinist who took very good care of his tools. Base: 3.5" x 2.5" x 1-3/8" Thick Height: 7.5" Extension: 10" Includes Indicator Arm which locks up tightly. The Indicator Clamp is in addition to the original tool purchased from Murkens. Policies Shipping: Shipping cost is dependent on the item and is based on weight. We ship to Worldwide via USPS(United States Postal Service) And usually ship within 1 business day of receiving your cleared payment. All items are shipped in packaging designed to protect your purchase. Free shipping to USA only. International customers pay for shipping. Payment: All Payments should be made thru PayPal. Returns: We accept returns for merchandise if the item is not as described in listing. If you are unsatisfied with any purchase please contact us“ before leaving feedback” within 14 days after receiving item. Every customer will receive prompt individual attention; and every effort will be made to make your purchase a pleasurable experience. International Buyers Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company; or when you pick the item up- do not confuse them with additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Thank you for shopping!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States High Quality: The bolt and nut Identifier gauge is crafted from CNC-machined 6061 aluminum alloy and 12.9 grade alloy steel thread, the anodized surface ... moremakes it stable and durable. The scales lines are laser-printed, easy to read markings with bright white on black design.
Buy It Now
Free Shipping Condition: Used Location: Hazel Park, United States you get what you see except for the $1.used.magnetic works.on off knob is stuck in the on position.has wear. I will combine shipping.$1 handling per auction ... moreon combined orders only.On combined orders I charge what it costs me to ship plus $1 handling per item) Connecticut buyers to pay 6.35% sales tax. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
Buy It Now
$10.95 Shipping Condition: Used Location: Clinton Township, United States STARRETT Surface Gage, Height Gauge with a 5/16" Arm and a snug with a. 150" hole. The tool is in very good condition. The corner pins move easily by ... morehand. The base snug is missing the little spring behind the knob.
5d 10h 56m 41s 0 bids
$100.00 Now
$8.51 Shipping Condition: Used Location: Allendale, United States This vintage Starrett Surface Gage is in the original 4 ½” x 2” x 1 ¾” deep card board box labeled“STARRETT(1 only) NO. 56-A TOOLMAKERS’ UNIVERSAL ... moreSURFACE GAGE with GUIDE THE L.S. STARRETT CO. ATHOL. MASS. U.S.A. on one end. The vintage surface gage has the original 4” long spindle loose in the box with a 7” spindle affixed to the gage. Because the longer spindle does not fit in the box, someone has cut notches on the end of the box and cover so the longer spindle sticks out! The bed of the gage is also marked“The Starrett Co. Athol, Mass. The metal has darkened with age and has a few small spots of surface corrosion. All the adjustable/movable parts turn freely. No instructions booklet in the box. See pic for design and condition of this Starrett No.56-A Surface Gage. To estimate shipping cost, please click on the shipping tab with this description. Please click on our other auctions for MORE TOOLS AND OTHER NEAT STUFF. We will be glad to combine shipping for multiple purchases. New York State residents add 8% sales tax. We ship the next day after receiving Paypal payments. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases!
$13.60 Shipping Condition: Used Location: Cloquet, United States This vintage Starrett Surface Gage is in the original 4 ½” x 2” x 1 ¾” deep card board box labeled“STARRETT(1 only) NO. 56-A TOOLMAKERS’ UNIVERSAL ... moreSURFACE GAGE with GUIDE THE L.S. STARRETT CO. ATHOL. MASS. U.S.A. on one end. The vintage surface gage has the original 4” long spindle loose in the box with a 7” spindle affixed to the gage. Because the longer spindle does not fit in the box, someone has cut notches on the end of the box and cover so the longer spindle sticks out! The bed of the gage is also marked“The Starrett Co. Athol, Mass. The metal has darkened with age and has a few small spots of surface corrosion. All the adjustable/movable parts turn freely. No instructions booklet in the box. See pic for design and condition of this Starrett No.56-A Surface Gage. To estimate shipping cost, please click on the shipping tab with this description. Please click on our other auctions for MORE TOOLS AND OTHER NEAT STUFF. We will be glad to combine shipping for multiple purchases. New York State residents add 8% sales tax. We ship the next day after receiving Paypal payments. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases!
Buy It Now
Free Shipping Condition: Used Location: Plymouth, United States Used General (USA) #397 Universal Surface Gauge / Magnetic Base / Indicator Clamp. The bigger sets of holes will hold a 5/16" & 3/8" shaft. The smaller ... moreones look to be for 1/8", 5/32", 3/16" & 1/4".
Buy It Now
Free Shipping Condition: New Location: Fremont, United States And it is pocket size and lightweight, easy to use and carry. You can hang it on an inspection tool kit or other place to avoid losing it. Thicken Design: ... moreMade of stainless steel, and through multiple processes, welding thickness gauge has thicken design, not easy to deform and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
6d 18h 11m 16s 0 bids
$18.00 Now
$9.00 Shipping Condition: Used Location: Homestead, United States Vintage Brown& Sharpe 621 Surface Gauge Gage 11" Spindle. Not Hardened + extras Surface gauge. Brown& Sharpe. No. 621. 11" spindle. ... moreNot hardened. One of the gauge pins in the rear end is missing. I'm including a tool holder spindle/attachment. Though I'm not sure it belongs with this item. Free shipping in the USA! SHIPPING COSTS are actual amounts paid to the Post Office and are based on your location. No hidden handling fees. DISCOUNTS on shipping and handling when buying multiple items is offered. INTERNATIONAL bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. OVERSEAS BUYERS- please be aware that although I ship the day after receiving your payment(sometimes the same day) I cannot guarantee delivery times. Your item may be held up in your country's Custom's Office. I will accept returns if notified within 14 days. BUYERS- I work very hard to earn Positive Feedback and 5-Star ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! THANK YOU for visiting! Please let me know if you would like more INFO or PHOTOS. I will be happy to oblige!
$6.00 Shipping Condition: Used Location: New Haven, United States Starrett No S167C Radius Gage Set Stainless Steel- Set is in excellent condition! The only thing missing is the handle. 25 Radius from 1/64" to 1/2" ... moreNo cracks on case. Initials on front have been blacked out. Gages look hardly used. Gage on side in pics is the 1/64 that goes in very top pocket. Any questions. Please do not hesitate to ask:D PayPal Only Please. 14 Day Return Guarantee- So you can buy with confidence. Please take a good look at pics so you know exactly what you are purchasing. I'm not a machinist. But it looks to me that everything is in this set, but the handle. I price tools I don't need low. So you can get tools you need at a savings! The economy is rough so we all gotta help each other out:D Free Shipping! Mail every day the post office is open. Thanks for looking:D Check out my!
Buy It Now
$10.00 Shipping Condition: Used Location: Lake Zurich, United States Vintage Machinist Surface Height Gage Scribe. Maybe shop made.
4d 17h 27m 17s 0 bids
$35.00 Now
$8.00 Shipping Condition: Used Location: Cody, United States This is a vintage V-Block Universal Surface Gage. Check the photos carefully for condition/
Buy It Now
$14.20 Shipping Condition: Used Location: Falling Waters, United States THE MAST IS LOOSE IN THE CYLINDER. BEING SOLD FOR PARTS OR RESTORATION. PRE-OWNED IN AS FOUND CONDITION, UNCLEANED.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars 4" Precision Dial Indicator Depth Base New. You may ask for freight cost before buying tools. Product features.
Buy It Now
$10.99 Shipping Condition: Used Location: Athol, United States Nice condition, see photos. Top quality tool from Starrett. Made in USA.
Buy It Now
$10.80 Shipping Condition: Used Location: Grand Bay, United States Vintage surface gage with arms as shown in pictures.
Buy It Now
$6.16 Shipping Condition: Used Location: Fort Lauderdale, United States There is a “set to” number stamped on the back of each hole gage. The user just need to press the base of the chamfer gage up against any flat surface ... moreand make sure the needle is pointing to the “set to” number that is on the back of the dial.
Buy It Now
$15.00 Shipping Condition: New – Open box Location: Snohomish, United States This product is new and open box, ensuring that you receive a product in excellent condition.
Buy It Now
$13.53 Shipping Condition: Used Location: Lafayette, United States Tool has not been used much & kept in original wooden case !
Buy It Now
Free Shipping Condition: Used Location: Farmingdale, United States Vintage Brown& Sharpe 621 Surface Gauge Gage 11" Spindle. Not Hardened + extras Surface gauge. Brown& Sharpe. No. 621. 11" spindle. ... moreNot hardened. One of the gauge pins in the rear end is missing. I'm including a tool holder spindle/attachment. Though I'm not sure it belongs with this item. Free shipping in the USA! SHIPPING COSTS are actual amounts paid to the Post Office and are based on your location. No hidden handling fees. DISCOUNTS on shipping and handling when buying multiple items is offered. INTERNATIONAL bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. OVERSEAS BUYERS- please be aware that although I ship the day after receiving your payment(sometimes the same day) I cannot guarantee delivery times. Your item may be held up in your country's Custom's Office. I will accept returns if notified within 14 days. BUYERS- I work very hard to earn Positive Feedback and 5-Star ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! THANK YOU for visiting! Please let me know if you would like more INFO or PHOTOS. I will be happy to oblige!
Buy It Now
$10.60 Shipping Condition: Used Location: Hermitage, United States Scribe points are sharp and in great condition. Surface gage is in very good working condition. Bottom surface of base is in very good condition.
Buy It Now
$15.70 Shipping Condition: Used Location: Sea Cliff, United States Nice pair of surface gages! 2 different designs - one for dial test indicators, and one for drop indicators. Makes a great combo! Condition: Perfect working ... morecondition! See pics for details.
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 ... morefalse false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE In this auction is offered surface gauge from early machinist or toolmaker. This gauge has very nice. Sturdy design. It has 3" diameter base. Post is 8.5" long and 3/8" in dia. It comes with 2 heavy duty clamps. Weight is 2.6 pounds. There is no marking except letters AG on one clamp, and base has initials on it. Don't forget to check my other auctions. You may find something you like and I will gladly combine shipping. Thank you for stopping by. Normal 0 false false false EN-US X-NONE X-NONE- SHIPPING: All items are shipped via USPS. Priority mail comes with tracking information to check on the delivery status of your mailing. We ship next or not more than 2 business days after payment is cleared. International Shipping Policies Addendum: If not quoted at the end of auction. Bidder is to email me for exact shipping fee. Items will be shipped via USPS Priority Air Mail(this is the only service which comes with tracking information to follow the package) or economy priority flat rate and First class air mail(up to 4 pounds) All international sales are final, and no refunds, items sold as is. We will not be responsible for any international customs clearance. Duties, and taxes. Some countries are notoriously know for their slow or unreliable shipping service(Russia. Italy) We prefer to ship only registered priority to these countries. If you have any questions contact us. PAYMENT: Payment is to be received
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 ... morefalse false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE In this auction is offered surface gauge from early machinist or toolmaker. This gauge has very nice. Sturdy design. It has 3" diameter base. Post is 8.5" long and 3/8" in dia. It comes with 2 heavy duty clamps. Weight is 2.6 pounds. There is no marking except letters AG on one clamp, and base has initials on it. Don't forget to check my other auctions. You may find something you like and I will gladly combine shipping. Thank you for stopping by. Normal 0 false false false EN-US X-NONE X-NONE- SHIPPING: All items are shipped via USPS. Priority mail comes with tracking information to check on the delivery status of your mailing. We ship next or not more than 2 business days after payment is cleared. International Shipping Policies Addendum: If not quoted at the end of auction. Bidder is to email me for exact shipping fee. Items will be shipped via USPS Priority Air Mail(this is the only service which comes with tracking information to follow the package) or economy priority flat rate and First class air mail(up to 4 pounds) All international sales are final, and no refunds, items sold as is. We will not be responsible for any international customs clearance. Duties, and taxes. Some countries are notoriously know for their slow or unreliable shipping service(Russia. Italy) We prefer to ship only registered priority to these countries. If you have any questions contact us. PAYMENT: Payment is to be received
Buy It Now
$8.85 Shipping Condition: Used Location: Cambridge, United States Starrett (?) unmarked Small Surface Gage 2" x 1.5" Base, 4" Spindle. Everything about this gage looks like a Starrett No. 56, but I can't find a mark ... morewhere you would expect it.
Buy It Now
Free Shipping Condition: Used Location: Forked River, United States Mitutoyo Model 156-502 Surface Gauge. What is the history of the item?. We test each item thoroughly and picture their current condition. Shows wear from ... morenormal use (scratches/scuffs).
Buy It Now
$11.79 Shipping Condition: Used Location: Cape Neddick, United States Starrett 257D Full-sized Surface Gage Excellent condition in original box With 12" and 18" Spindles and 1 scribe. Both spindles are straight ... moreRetails for over $250 Surface Gage Base Size(In. 3-1/2 x 3-3/16 Upright Post Dia. In. 3/8" Construction Hardened Steel Base Finish Black Features 12" And 18" Spindle Lengths Includes Scriber
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States SHARS SMALL HOLE GAGE SET 4 PC FULL BALL TYPE NEW. Gauging ball surface is hardened, and full round with a flat bottom. Knurled knob at end of handle ... moreadjusts gauge to hole size. Gauge Ranges: 0.125-0.200,0.200-0.300,0.300-0.400,0.400-0.500".
Buy It Now
$12.99 Shipping Condition: Used Location: Bloomington, United States
Buy It Now
$5.50 Shipping Condition: Used Location: Streetsboro, United States Each gage opens and closes and locks well. Surface finish is in good condition. Quality Used Item - professionally inspected.
Buy It Now
$8.50 Shipping Condition: Used Location: Spokane, United States VTG Surface Gage& Scribe. 12" Rod.6" Scribe. Rod Marked L.S.Starrett Co. No Other Markes can be Found. Base 2 7/8" X 2 1/2" Great ... moreWorking Condition. Base Rust Free and Smooth Edges.
Buy It Now
$9.99 Shipping Condition: Used Location: Lebanon, United States Great early small gauge!Everything moves and adjusts as it shouldFaint owners mark on badgeBrown & Sharpe Surface Gauge. Bkhwbx
Buy It Now
Free Shipping Condition: New Location: Melville, United States SPI 2 Spindle, 4 and 7 Inch Spindle Length, Surface Gage 2-1/4 Inch Long x 1-5/8 Inch Wide Base, 7/8 Inch Overall Height
Buy It Now
$8.95 Shipping Condition: Used Location: Youngstown, United States Email any questions. Will combine shipping. a3
2d 17h 23m 12s 0 bids
$40.00 Now
$6.00 Shipping Condition: Used Location: New Haven, United States YOU WILL RECEIVE 1(ONE) Starrett No. S167M METRIC RADIUS GAGE SET. Starrett MM Set. 22 GAGES: 5 mm 1 mm 1.5 mm 2 mm 2.5mm 3 mm 3.5 mm 4 mm 4.5 mm 5 mm ... more5.5 mm 6 mm 6.5 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm Holder IMPORTANT NOTE: These have NEVER BEEN USED. But Starrett sold them to me as surplus to their needs and/or salesman's samples. YOU WILL BE PLEASED WITH YOUR PURCHASE. I GUARANTEE YOUR SATISFACTION. Details: No. S167MC Radius Gage Kit, 22 Metric(MM) Radius Gages, Holder, Stainless Steel, Plastic Case, I STILL GUARANTEE YOUR SATISFACTION. These are precision instruments and will be carefully shipped in a bubble envelope. Shipping and handling will be by First Class Mail with Delivery Confirmation. Shipping/Handling is FREE in the USA. Foreign Buyers: See the Shipping/Handling Calculator. Payment by PayPal is REQUIRED as per E-Bay policy. I ship Quickly once paid and I always reciprocate feedback. BE THE BIDDER AND BE THE WINNER. On Apr-05-13 at 06:26:05 PDT. Seller added the following information:
18h 21m 20s 0 bids
$89.95 Now
$5.55 Shipping Condition: Used Location: Newington, United States
Buy It Now
Free Shipping Condition: New Location: Ontario, United States High Material: This thread identifier gauge is made of CNC machined 6061 aluminum alloy and 12.9 grade hardness tool steel threads. The anodized surface ... moremakes it stable to use. The scale lines are printed and the markings are easy to read, which has bright black-on-white design.
Buy It Now
$10.60 Shipping Condition: Used Location: Avon, United States The Lufkin Rule Co. No.522 Scribing Block/Stand Surface Gage with Scribe This vintage tool is in very nice condition Check my feedback and bid/buy with ... moreconfidence
2d 11h 42m 20s 0 bids
$44.99 Now
$10.99 Shipping Condition: Used Location: Athol, United States Has etchings. This has a Starrett rod but I do not think the actual surface gage is Starrett. Still well made, heavy duty tool. 12" rod with snug. Nice ... morequality tool.
Buy It Now
$6.05 Shipping Condition: Used Location: Huntingdon Valley, United States A used L. S. STARRETT No. 474 machinist Screw Pitch Thread Gage 4-80 TPI 28 Leaves in good condition. Ask questions and check out the photos carefully ... moreas I don't offer refunds except when I make a huge error in the listing. Shipping is $3. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
$8.25 Shipping Condition: Seller refurbished Location: Madison, United States VINTAGE REFURBISHED SURFACE GAGE 10" HEIGHT(B16-128)
Buy It Now
$12.50 Shipping Condition: Seller refurbished Location: Madison, United States 🗽 EXCELLENT CONDITION WAS A REAL NICE PIECE TO WORK ON .BROWN AND SHARPE 621 HARDENED SURFACE GAGE, REFURBISHED IN ORIGINAL BOX 10"& 12" POSTS,SCRIBE ... more& INDICATOR POST(B101-304)
Buy It Now
$6.55 Shipping Condition: New Location: Dallas, United States Resolution: 0.001 mils (0.1 micron);. High dust, gas pollution, changes in humidity and temperature will not stop the operation of this device. Thickness ... moregauge of model CM-208Z. Digital LCD display for clear reading;.
Buy It Now
$15.10 Shipping Condition: New – Open box Location: Cockeysville, United States PENN TOOL CO SURFACE GAGE 9" AND 12” Spindles New W Box.
|
|
|
|
Federal (Mahr) Pocket Surf EMD-1500-311 Profilometer surface roughness gage
Federal Pocket Surf Profilometer surface. Roughness gage which has only been used about a dozen times and is in perfect working condition. Model EMD-1500-311 Comes with the case.9 volt battery already installed instruction manual. Foam lined carrying case. Riser Plate for calibrating the gage with the Reference Specimen is also included. Probe can be used in either 90 deg. 180deg. or 270deg. position. New this item is about $2600.00 at MSC Industial(Item# 66010034) Note see below for all specs. and instructions. Sorry but I can't seem to get all the pictures in the manual to print! 1 Instructions Portable Surface Roughness Gages Pocket Surf® MAHR GMBH. GERMANY • MAHR FEDERAL INC. USA 2 The Pocket Surf ® gage is a portable battery-powered instrument for checking surface roughness with the measured values displayed ... moreon a digital readout. The instrument can be used in the laboratory. An inspection area. In the shop, or wherever on-site surface roughness gaging is required. A Pocket Surf kit is furnished in a fitted case. And includes a Pocket Surf unit with a General Purpose Probe † and a 125m"3.2mm(nominal) Reference Specimen † plus: • EBY-1014 9-volt Alkaline Battery • EPL-1681 Riser Plate. For calibrating the gage with the Reference Specimen. † Part Numbers listed in “Models” table on next page. Description Even though this gage is designed and built to withstand the rigors of handling and use. It is a precision instrument and should be treated with care to assure measurement accuracy and reliable performance. Note: U.S. Patent No. 4.776,212 Product design and specifications subject to change without notice. Pocket Surf® is a registered trademark of Mahr Federal Inc. ®Mahr Federal Inc. 2000 3 Measuring Ranges. Ra — 1m" to 250m"0.03mm to 6,35mm Ry — 8m" to 999m"0.2mm to 25,3mm Rmax — 8m" to 999m"0.2mm to 25,3mm Rz — 8m" to 999m"0.2mm to 25,3mm Display R
|
|
|
Nice Looking Surface Inspection Gage with No Makers Name
Combined Shipping On Multiple Purchases Whenever Possible! Trader Mike Tools Buys. Sells& Trades almost anything that is legal. We seek out working and non working antique old tools, tooling and attachments along with old garden tractors, walk behind tractors and attachments for them that are no longer available to purchase in todays market. Wood or Metal Working Equipment& Accessories we love everything about them. We dabble in alot of stuff and you just never know what we will horse trade for next. We are located in the state of Michigan and do not normaly travel outside the state. We love to Dicker, Deal, Haggle and just have a good ole time doing it. Contact us if you have any questions about this or any other item we have up for bid. Description: Here's a Nice Looking Surface Inspection Gage with no makers name. The base ... moreis 3 1/4" x 2 1/2" Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were ma
|
|
|
STARRETT No.56-A TOOLMAKER'S UNIVERSAL SURFACE GAGE with 2 SPINDLES in BOX
This vintage Starrett Surface Gage is in the original 4 ½” x 2” x 1 ¾” deep card board box labeled“STARRETT(1 only) NO. 56-A TOOLMAKERS’ UNIVERSAL SURFACE GAGE with GUIDE THE L.S. STARRETT CO. ATHOL. MASS. U.S.A. on one end. The vintage surface gage has the original 4” long spindle loose in the box with a 7” spindle affixed to the gage. Because the longer spindle does not fit in the box, someone has cut notches on the end of the box and cover so the longer spindle sticks out! The bed of the gage is also marked“The Starrett Co. Athol, Mass. The metal has darkened with age and has a few small spots of surface corrosion. All the adjustable/movable parts turn freely. No instructions booklet in the box. See pic for design and condition of this Starrett No.56-A Surface Gage. To estimate shipping cost, please click on the shipping tab ... morewith this description. Please click on our other auctions for MORE TOOLS AND OTHER NEAT STUFF. We will be glad to combine shipping for multiple purchases. New York State residents add 8% sales tax. We ship the next day after receiving Paypal payments. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases!
|
|
|
Vintage Antique Starrett Surface Gage "Pat. March 17, 1897." Machinist Tool
Vintage Starrett Machinist/ Toolmaker/ Inspection Surface Gage L.S. Starrett Co. Athol, Mass. USA Pat. March 17. 1897 Used in overall very good condition with some small dings. And use marks as shown. Thumbscrew on base is slightly bent, Works perfectly! Used in a shop. Typical wear but no defects. All items are as shown and sold as-is.
|
|
|
Vintage STARRETT No.257A Universal Surface Gage Nice! Vntg Machinist Tool in Box
Up for your bids is this Vintage STARRETT No.257A Universal Surface Gage. Machinist Tool in its original box. It is in very good condition, as far as I can see with no etching. The screws turn freely and the tool adjusts freely. Good luck bidding. I combine shipping. Posted with 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13ddc523ffa-0x105-
|
|
|
L.S. STARRETT SURFACE GAGE, MACHINIST & WOODWORKING TOOLS
Normal 0 L.S. STARRETT SURFACE GAGE. IN VERY NICE WORKING CONDITION. BASE IS 2-7/8” X 2-1/2” THE MAST IS 7-1/2” LONG AND 5/16” DIA. INCLUDES INDICATOR OR SCRIBE SWIVEL CLAMP. MADE IN ATHOL, MASS. U.S.A. PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment.
|
|
|
KANETSU? TOOLMAKER'S MAGNETIC SURFACE GAGE STAND #2
KANETSU? TOOLMAKER'S MAGNETIC SURFACE GAGE STAND#2 I SEE NO MARKING ON THIS TOOL BUT IT LOOKS LIKE A KANETSU BUT I'M NOT SURE IN VERY NICE USED WORKING CONDITION ITEM WILL BE SHIPPED PROMPTLY USING PRIORITY MAIL W ITH TRACKING& INSURANCE Please look at the pictures and judge the condition of this item for yourself as our photos are a large portion of our description and what you see is what you get! If you have any questions please ask before you purchase this item and i will answer them promptly(usually within an hour) We are human and sometimes make mistakes so if there is a difference between the descriptive text and the photos. The photos will be considered the correct information I do combine shipping on everything I sell. SHIPS FROM CHICAGO THE SAME DAY AS PAYMENT! CHECK OUT MY GREAT FEEDBACK IMPORTANT- YOUR SATISFACTION ... moreIS OUR NUMBER ONE GOAL. IF YOU FEEL WE DON'T DESERVE POSTIVE 5 STAR FEEDBACK IN ALL CATEGORIES FOR ANY REASON PLEASE CONTACT US BEFORE YOU LEAVE YOUR FEEDBACK SO WE CAN(AND WE WILL) RESOLVE ANY ISSUES YOU MIGHT HAVE. IMPORTANT FEEDBACK INFO- EBAY HEAVILY WEIGHTS LOW 1 OR 2 STAR DSR RATINGS(DETAILED SELLER RATINGS) AGAINST SELLERS AND IN SOME INSTANCES IT CAN BE EQUIVALENT TO LEAVING AROUND 8 NEGATIVE FEEDBACKS PER 1 LOW DSR. A 3 STAR RATINGS(OUT OF 5 STARS) IS NOT WEIGHTED BY EBAY IN THE SAME WAY. WITHOUT THIS INFORMATION WE FEEL BUYERS CAN'T HONESTLY AND KNOWLEDGEABLY RATE SELLERS. WE FEEL BUYERS MIGHT INAVERTANTLY LEAVE HARSHER POSITIVE OR NEGATIVE FEEDBACK THAN THEY REALIZED BY NOT KNOWING THE RATING SCALE THAT EBAY APPLIES TO THESE RATINGS. Please bear in mind that shipping charges encompass more than just postage. We have to pay for the packing materials. Boxes& mailers, paper& ink for the printer, gas, etc. Shipping charges increase a great deal when a package exceeds 13 ounces domestic and over 4 pounds internationally. You can see the shipping charge before you buy and i always try only to charge actual shipping costs.If you do not feel that you cannot gi
|
|
|
MURKENS MG-1 SURFACE GAGE OLD VINTAGE PRECISION INSPECTION TOOL GRINDER MILL!!
MURKENS SURFACE GAGE INDICATOR STAND(TRANSFER/ SQUARENESS GAGE) MURKENS MAKES THESE SURFACE GAGES FOR(HERMANN SCHMIDT#MG1) AND(BROWN& SHARPE#599-585-1 HITE-CHEK) BASE DIMENSIONS: 3 1/2" LONG x 2 1/2"WIDE x 1 3/8 THICK 9" HIGH TO TOP OF UPRIGHT POST 13" HIGH WITH INDICATOR MOUNTING ROD IN VERTICAL POSTION INDICATOR MOUNTING ROD IS.312 IN DIAMETER AND 4 3/4" LONG WITH THREE DIFFERENT MOUNTING DIAMETERS: 217. 220 AND.250 DIAMETERS UPRIGHT POST DIAMETER: 562 DIAMETER BOTH THE INDICATOR MOUNTING ROD& THE UPRIGHT POST HAVE A HARD CHROME FINISH TO PREVENT WEAR HARDENED FINE PITCH SCREW 40 T.P.I. WITH LARGE ADJUSTMENT KNOB FOR PRECISE CONTROL BASE IS HARDENED AND LAPPED BACK OF BASE IS GROUND FOR CHECKING SQUARENESS THIS INDICATOR STAND IS IN EXCELLENT CONDITION WITH THE EXCEPTION OF A NAME THAT HAS BEEN LIGHTLY ENGRAVED ... moreON THE SIDE. IT APPEARS TO HAVE BEEN USED VERY LITTLE IF AT ALL. EVERYTHING MOVES SMOOTHLY& FREELY& THE INDICATOR ARM LOCKS UP TIGHTLY. JUDGING FROM THE LARGER DIAMETER UPRIGHT POST(562 AS OPPOSED TO.500) AND THE LONGER INDICATOR MOUNTING ROD THIS GAGE APPEARS TO BE A NEWER VERSION BROWN& SHARPE MODEL. WHICH IS PRICED IN THE MSC CATALOG AT OVER $500. 00 The Design. The innovative design of the Murkens Gage makes it one of the most rigid bases you will ever use. This rigidity greatly increases the repeatability of your indicator while decreasing the number of adjustments necessary during use. The simplicity of the mechanism results in fewer moving parts to repair or gnt replace. The overall performance of this gage is most impressive. The Features. Spring steel front for rigidity. Hardened-40 screw with extra-long brass bushing. Blackened for appearance and rust resistance. Built-in bar for checking squareness. Hardened bottom with dirt grooves. Large diameter adjusting knob for sensitivity. Wrench hole in end of chromed rod for tightening/loosening. Spring-loaded indicator rod prevents nose-diving. 10" chromed rod for tall work pieces. Product Specificati
|
|
|
BROWN & SHARPE MAGNETIC SURFACE GAGE No. 743, MACHINIST & WOODWORKING TOOLS
Normal 0 VINTAGE BROWN& SHARPE MAGNETIC SURFACE GAGE No. 743. IN VERY NICE WORKING CONDITION. THE BASE IS 3-3/16” LONG X 2-7/16” WIDE X 1-3/8” THICK. THE MAST IS 12” LONG X 5/16” DIA. THE EXTRA EXTENSION ROD IS 11” LONG X 5/16” DIA. INCLUDES A WORKING.001 JEWELED FEDERAL INDICATOR AND TWO INDICATOR CLAMPS. PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment. Insurance is included,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13e151a4fb6-0xef-
|
|
|
COLLINS MICROFLAT 24" x 18" x 3" THICK GRANITE SURFACE INSPECTION GAGE PLATE
COLLINS MICROFLAT SURFACE PLATE* 24" x 18" x 3" THICK* NEEDS CALIBRATION* MADE IN U.S.A CONTACT FOR WEIGHT CALIFORNIA RESIDENTS PAY 7.75% SALES TAX NO FREE SHIPPING! PLEASE EMAIL FOR LOCAL PICK UP TIMES AND FREIGHT CHARGES. BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE
|
|
|
SURFACE GAGE LUFKIN 521B OLD VINTAGE PRECISION TOOL INSPECTION GRINDER LAYOUT!!
LUFKIN RULE CO. No. 521B HARDENED BASE SURFACE GAGE. ORIGINAL BOX AND PAPER WORK SHOWN ARE INCLUDED. LOOKS LIKE IT IS BRAND NEW AND NEVER USED BUT I WILL SELL IT AS USED. BASE IN EXCELLENT LIKE NEW CONDITION WITH A 4" 7" SPINDLE ROD IN IT! VERY NICELY MADE AND SILKY SMOOTH. BASE HAS NO ENGRAVING ANYHWERE I CAN SEE AS SHOWN. COMES AS SHOWN IN PICTURES. BASE MEASURES USING CALIPERS 1-15/32" WIDE X 2-1/8LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED. GAGE ALSO HAS THE(2) ALIGNMENT PINS IN BASE FOR LINEAR WORK. CURRENT LIST AT MSC IS $215.00 FOR A NEW GAGE ON PAGE 1343! SAVE SOME$$ HERE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! THANKS FOR LOOKING! PLEASE LOOK AT OUR MACHINIST ITEMS. WE HAVE MANY VERY HARD TO FIND ITEMS! ... moreI will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I USE A HERMANN SCHMIDT SQUARING BLOCK OR VISE AND A HERMANN SCHMIDT MAGNETIC SINE CHUCK FOR ACCURACY AND THEY DO VERY WELL BOTH PICTURED IN MANY AUCTIONS! I DO NOT JUST CLAIM TO HAVE AND USE THEM I DO USE THEM AND SHOW THEM IN MANY AUCTIONS! I HAVE MANY MANY MORE PARALLELS. PARALLEL SETS, BLOCKS,1-2-3 BLOCKS AND MATCHED SETS OF 2 AND 4 PLUS V-BLOCKS, AND SETS OF V-BLOCKS TO LIST KEEP WATCHING! ALL TOOLS ARE IN GREAT SHAPE DUE TO STORAGE IN A GE
|
|
|
Starrett 257C Surface Gage
Just recently retired from my position as a machinist. I am listing most of my tooling. Great Condition! Starrett 257c The stable steel base is fully hardened. Ground and nicely finished. There are four gage pins, frictionally held, that add versatility for referencing the tool. These are selling for$175 and up new. I have a very low reserve on this item and I will throw in the indicator holder seen in the picture. Spindle Length(in) 12 Spindle Length(mm) 300mm Base Size(in) 3-1/2 x 3-3/16 Base Size(mm) 90 x 80mm
|
|
|
Machinists 4/15A Buy Now (3) Starrett 5/16 x 9" Beam For Surface Gage
Absolutely Straight Cheap Shipping on all smalls + no bs combining.bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship ... moreno problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra items or similar scams! NOTE SHIPPING COST + COMPARE TO OTHERS-WHY GET BONED? COMBINE SHIPPING-ALL SHIPPING IS AT REAL COST-I DO NOT MAKE MONEY ON SHIPPING(AM I THE ONLY PERSON ON EBAY THAT DOESN'T?
|
|
|
Brown & Sharpe 9" Universal Surface Gage 621 Good Condition - In original box
9" spindles- in original box and have original instructions Barely used- hardly any wear or use
|
|
|
SurfAnalyzer 7100 Clevite Brush 21-0100-00 21-1420-00 Machinist Gage Surface
This auction is for a Used SurfAnalyzer 7100 System. Being sold for parts or repair only. Clevite Brush Model Numbers are 21-0100-00 and 21-1420-00. 1st unit turns on but Battery indicates low. 2nd unit has broken cover on end. Comes as shown so Please look at pictures closely to be sure this will work for your application. Selling as is No Returns. Shipping will be Calculated which includes Insurance& Delivery Confirmation. PAYPAL ONLY. Please visit my EBAY store to see if there is anything else you might be interested in. Currently have some other probes. Machinist tools, EDM Wire, Tig Welder parts, micrometers, dial gages, Copper wire, resisters, small tools, and I have many used parts for engines and other items If you do not see what you need in any of my other auctions please e-mail me thru EBAY. If I have it I'll list it. I ... morewill be listing more items daily so check my store often for more bargains. Thanks for looking. Happy Bidding! International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. On Jan-14-12 at 08:44:06 PST. Seller added the following information:
|
|
|
Hommelwerke T2000 Surface Profile Gage (profilometer)
Hommelwerke T2000 Surface Profile Gage(profilometer) The gage powers up. It comes from a recently closed lab in Michigan. Included in the sale: Hommelwerke T2000 surface gage 2 probes Fowler bench center Instruction manual Surface texture analysis handbook Please feel free to give us a call at 860-242-4953 if you have any questions on the unit. Or would like to dicuss payment options. We do accept Personal. Company and Bank Checks, as well as Bank Wire Transfers, and Money Orders. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction ... moreand want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. The buyer of this item is responsible for all duties and customs fees on the shipping of this item. RETURN POLICY: All units are being sold"as is. Where is" The auction description is written as a guide, we strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e42e496ef-0xf2-
|
|
|
Starrett 257D +A Surface Gage set
Shipping will be with the USPS. If you have any specific shipping needs. Please contact me. Shipping is free. Starrett 257D + A Surface Gage set" I used this for a few years. And it is in great condition. USED This item is used and will have wear showing this. All items are in good working order unless otherwise stated. I ship Every auction USPS within 2 business days of receiving payment. If you want tracking it will cost $1.00 extra. I ship Monday through Sunday except holidays. International orders will cost $10.50 extra. This will include tracking. Please keep in mind that International orders tend to take longer to get threw customs. International buyers; Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs ... moreoffice to determine what these additional costs will be, prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We accept ONLY! Please feel free to contact me through Ebay.
|
|
|
Vintage Brown & Sharpe 621 Surface Gauge Gage 11" Spindle + Tool Holder
Vintage Brown& Sharpe 621 Surface Gauge Gage 11" Spindle. Not Hardened + extras Surface gauge. Brown& Sharpe. No. 621. 11" spindle. Not hardened. One of the gauge pins in the rear end is missing. I'm including a tool holder spindle/attachment. Though I'm not sure it belongs with this item. Free shipping in the USA! SHIPPING COSTS are actual amounts paid to the Post Office and are based on your location. No hidden handling fees. DISCOUNTS on shipping and handling when buying multiple items is offered. INTERNATIONAL bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. OVERSEAS BUYERS- please be aware that although I ship the day after receiving your payment(sometimes the same day) I cannot guarantee delivery times. Your item may be held up in your country's ... moreCustom's Office. I will accept returns if notified within 14 days. BUYERS- I work very hard to earn Positive Feedback and 5-Star ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! THANK YOU for visiting! Please let me know if you would like more INFO or PHOTOS. I will be happy to oblige!
|
|
|
Vintage Machinist Surface Gage / Guage Tool - Toolmaker
Right from a local estate sale you are bidding on a machinist surface gage guage Sorry I don't know anything about it. Bought as is. Looks like it was never used. Stands about 9" high with a double type instrument in it. Check out the pictures. They are a large part of the description and show actual items that are for sale in this listing. Any questions. Please ask and have a blessed day. Thanks for looking. We try to ship daily and are always glad to combine shipping when possible We try our best to give an accurate description of each item. Please note that many of the items we sell are vintage or used and may not be in perfect condition. With as much items as we work with we can miss a small flaw. Chip, etc. and would appreciate your understanding if this should happen. If you should find a discrepancy between the item description ... moreand the item condition. Please contact us immediately so that a mutually agreeable solution can be reached without delay. Our goal is not to deceive anyone- our goal is satisfied customers. Check out my other items! Be sure to add me to your favorites list
|
|
|
Vintage Starrett Surface Gage Indicator with Scribe
Gage is in excellent working condition. Knobs turn smoothly. Mast and scribe parts turn and slide as they should. The LS Starrett Co, Athol Mass USA' is clearly stamped on the mast(my lack of photography skill make it look blurry)
|
|
|
Surface Gage Indicator Holder
Larger Surface Gage Indicator Holder. Excellent Shape. With a long arm.
|
|
|
machinest magnetic base surface gage post clamp snug 3/8-3/8
Machinist magnetic base surface gage post clamp snug, two 3/8 holes good condition. $20.00 not included, L ower 48 only.
|
|
|
portable surface roughness gage
This is an older but working roughness gage. All is there I believe comes with everything you see including the instruction manual. The item is used no return policy will ship as soon as payment clears thank you for looking. Posted with
|
|
|
ENCO TOOLMAKER'S MAGNETIC SURFACE GAGE DIAL INDICATOR STAND Made in USA #2
ENCO TOOLMAKER'S MAGNETIC SURFACE GAGE DIAL INDICATOR STAND Made in USA#2 IN VERY NICE USED WORKING CONDITION ITEM WILL BE SHIPPED PROMPTLY USING PRIORITY MAIL W ITH TRACKING& INSURANCE Please look at the pictures and judge the condition of this item for yourself as our photos are a large portion of our description and what you see is what you get! If you have any questions please ask before you purchase this item and i will answer them promptly(usually within an hour) We are human and sometimes make mistakes so if there is a difference between the descriptive text and the photos. The photos will be considered the correct information I do combine shipping on everything I sell. SHIPS FROM CHICAGO THE SAME DAY AS PAYMENT! CHECK OUT MY GREAT FEEDBACK IMPORTANT- YOUR SATISFACTION IS OUR NUMBER ONE GOAL. IF YOU FEEL WE DON'T DESERVE ... morePOSTIVE 5 STAR FEEDBACK IN ALL CATEGORIES FOR ANY REASON PLEASE CONTACT US BEFORE YOU LEAVE YOUR FEEDBACK SO WE CAN(AND WE WILL) RESOLVE ANY ISSUES YOU MIGHT HAVE. IMPORTANT FEEDBACK INFO- EBAY HEAVILY WEIGHTS LOW 1 OR 2 STAR DSR RATINGS(DETAILED SELLER RATINGS) AGAINST SELLERS AND IN SOME INSTANCES IT CAN BE EQUIVALENT TO LEAVING AROUND 8 NEGATIVE FEEDBACKS PER 1 LOW DSR. A 3 STAR RATINGS(OUT OF 5 STARS) IS NOT WEIGHTED BY EBAY IN THE SAME WAY. WITHOUT THIS INFORMATION WE FEEL BUYERS CAN'T HONESTLY AND KNOWLEDGEABLY RATE SELLERS. WE FEEL BUYERS MIGHT INAVERTANTLY LEAVE HARSHER POSITIVE OR NEGATIVE FEEDBACK THAN THEY REALIZED BY NOT KNOWING THE RATING SCALE THAT EBAY APPLIES TO THESE RATINGS. Please bear in mind that shipping charges encompass more than just postage. We have to pay for the packing materials. Boxes& mailers, paper& ink for the printer, gas, etc. Shipping charges increase a great deal when a package exceeds 13 ounces domestic and over 4 pounds internationally. You can see the shipping charge before you buy and i always try only to charge actual shipping costs.If you do not feel that you cannot give me a five star rating on shipping charges please cont
|
|
|
Machinists (1) Lufkin Case Hardened V Base Surface Gage
2 1/2 x 3 1/4 Base 8" Beam Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" ... moreI BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handl
|
|
|
VINTAGE GOODELL PRATT TOOLMAKERS 9" UNIVERSAL SURFACE GAGE MACHINIST TOOL USA
VINTAGE GOODELL PRATT SURFACE GAGE BASE IS 2 1/2" X 3" MAIN POST IS 9" TALL SCRIBER IS 7" LONG BASE WORKS ON FLAT OR CYLINDRICAL SURFACES ALSO WORKS AS A HEIGHT GAGE OR DEPTH GA GE. SOME SCRATCHES ON PAINTED SURFACE. REAL NICE OLD MACHINIST TOOL WHAT YA SEE IN THE PICTURES IS WHAT YA GET! PLEASE LOOK AT PICTURES FOR COMPLETE DESCRIPTION AND ASK QUESTIONS BEFORE BIDDING! OVER THE NEXT FEW WEEKS I WILL BE LISTING LOTS OF MACHINIST TOOLS-TONS OF STARRETT TOOLS AND OTHER ITEMS FOR SALE-SO ADD ME TO YOUR FAVORITE SELLERS AND CHECK BACK O FTEN FOR NEW LISTINGS.
|
|
|
Surface gage Starrett 56A universal gauge + 4" spindle toolmaker machinist tool
as is in pictures Greetings AGAIN AND AGAIN to all my customers. Please keep in mind that eveything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
|
|
|
Hommelwerke Hommel Tester T1000 Profilometer Surface Roughness Gage DT14
Hommelwerke Hommel Tester T1000 Profilometer Surface Roughness Gage DT14 T1000 Hommel Tester Controller LV15 Profilometer Drive, Hommelwerke Profilometer Tip/Probe/Skid, Includes 2 surface Roughness Standards, Assorted Accessories as pictured, As pictured the roughness standard is 239 and the unit read 246.8. These units can be adjusted to bring within calibration. Please email if you have any questions or would like to speak with someone in person. Call 860-242-4953 to discuss the machine or payment options. We do accept Personal. Company and Bank Checks, as well as Bank Wire Transfers, and MO. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up ... moreto 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: All units are being sold with a 14 day right of return(return shipping the cost of buyer) The auction description is written as a guide. We strongly recommend that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
Starrett Surface Gage 257A & Indicator Holder - Near Mint - Machinist Tool
Starrett Surface Gage 257A& Indicator Holder- Near Mint- Machinist Tool Up for purchase is a Starrett Surface Gage 257A& Indicator Holder Excellent near Mint condition. No previous owner's markings or rust. Case hardened finish is all intact. Please view the pictures. Measurements: 9" Spindle Length. Base: 2-7/8" Length, 2-3/8" Width Description: The Starrett 257A full-sized surface gauge has a 9” 225 mm) spindle mounted onto a hardened steel base. With a 6” 150 mm) scriber for accurately scribing lines, transferring measurements, and probing surfaces in inspection work. The included scriber is 6” 150 mm) in length and 9/64” 3.6 mm) in diameter. And is held to the spindle by a sliding snug with a knurled, ring-type lock nut for secure positioning. The 9” spindle is 5/16” in diameter. The steel base is hardened, ... moreground, and lapped for a smooth, flat surface, and measures 2-7/8” 72 mm) by 2-3/8” 60 mm) Four frictionally held gauge pins in the base can be pushed down and referenced against the edge of a surface plate or T-slot for linear work. The satin chrome finish resists rust and is glare-free. Surface gauges. Sometimes referred to as gages, are a tool for machinists and toolmakers to mark lines on a workpiece, transfer measurements from one workpiece to another, and for probing surfaces in inspection work. The scriber is held by a snug that travels on a vertical column(also called the spindle) and may be locked into position by a screw clamp. Surface gauges are typically used in manufacturing, machining, and mechanical engineering. Please view the pictures for complete details
|
|
|
BROWN & SHARPE No. 625 PLANER SURFACE GAGE GAUGE MACHINIST TOOLS *11
BROWN& SHARPE No. 625 PLANER SURFACE GAGE GAUGE MACHINIST TOOLS C ondition/I n fo: Good condition. Some stains(see photos) I am also including a screw gage. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. PAYMENT DUE WITHIN 3 DAYS OF AUCTION CLOSE. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will ... morebe happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
MACHINIST UNIVERSAL SURFACE GAGE GAUGE 4 PINS 2 7/8 x 2 3/8 *C
MACHINIST UNIVERSAL SURFACE GAGE GAUGE 4 PINS 2 7/8 x 2 3/8*C Condition/I n fo: Good condition. Some rust stains. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be ... moresure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
Taylor Hobson Surtronic 3 Surface Measuring Profilometer Gauge/Gage 112/500
Taylor Hobson Surtronic 3 Surface Measuring Profilometer Gauge/Gage 112/500-850992 THIS ITEM IS USED AND HAS LIGHT COSMETIC WEAR. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 112/500-850992 OVERALL DIMENSIONS: WIDTH: 5" LENGTH: 10" HEIGHT: 5" SHIPPING WEIGHT: 7 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS ... morePACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER&#
|
|
|
1966 Surface Checking Roughness Gage Quality Control Inspection Tool Machining
Vintage 1966 Surface Checking Roughness Gage Very Good Condition. No Found Writing. Pages are Clean and Bright. Should be happy with the quality of this tool Fun Vintage Tool that is Very Usable today* I have one more of these very same books. But no box- Please inquire if you would like both* Shipping is for the US 48(Additional Elsewhere) Priority Mail is an option too No Delay with Shipping. Will Ship Immediately- Same day if possible. Following Day Latest Thank You- Rj(661) 607-9140
|
|
|
PILE OF MACHINIST TOOLING INDICATOR BASES SURFACE GAGE GAUGE
DESCRIPTION: USED. MACHINIST STANDS. THERE IS A MITI MIGHT AND ERICK INDICATOR STANDS AND A NO NAME SURFACE GAGE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE ... moreMAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALK
|
|
|
Microfinish Comparator S-22 Surface Roughness Gage w Sleeve Machinist BAPTIST
UP FOR YOUR CONSIDERATION IS: Microfinish Comparator S-22 Surface Roughness Gage w Sleeve Machinist BAPTIST. FREE SHIPPING" PURCHASED AT AN ESTATE SALE. BAPTIST MACHINE CO MFG. 5 X 2-1/9" NO ID ENGRAVING ON GAGE. NICE CLEAN. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Milling machine, Machinist Vintage Surface Gage Gauge for mill milling lathe
This Sale is for a: Vintage Milling Machine. Machinist Surface Gage. Please check my other items/ auctions because I will be selling more machinist tools. Bits, calipers, etc. California residents but sales tax of 8% will be applied at time of check out. Sorry. Please note that I am not a machinist so unfortunately. I can't answer any questions regarding this auction. Please check our Feedback. We STRIVE for 100% feedback. That is why we always take the extra time and care to make sure YOUR item is packaged safely then shipped quickly! Sorry. NO International sales. We only ship within The USA. Buyer shall be responsible to add APPROPRIATE insurance fees to payment if so desired. Payment shall be done only through PayPal. Payment shall be done immediately after auction has ended. Some boxes may have inked out markings, wrinkl es. Flaps ... moremissing, etc, if so, it is reflected in our very low prices. We always ship your item promptly after your payment has been confirmed by PayPal.
|
|
|
LARGE VINTAGE STARRETT UNIVERSAL SURFACE GAGE 11-1/2" SPINDLE 9" SCRIBER
International Bidders will be responsible for all fees for your country. All Bidders PLEASE NOTE: Due to my shipping schedule Ebay automatically opens an unpaid bidder case for items that are not paid within 4 days so please do not place a bid if you cannot complete the payment via Paypal within 4 days. Up for bids is a Vintage Large size Starrett Universal Surface Gage. The approximate sizes: Spindle 11-1/2" Scriber 9" Base 3-1/2" x 3" Marked on Spindle: THE L.S. STARRETT CO. ATHOL, MASS USA" There is a name of a previous owner etched on the base. I've not cleaned this as I don't have the proper material for cleaning metal. Please view the other machinist tools that I've acquired from an estate sale. Please use the zoom feature to view all other details. I will be glad to combine shipping if you wait ... moreuntil I send my invoice rather than pay from the invoice that Ebay sends. Please use the zoom feature to view condition and email me with any questions you may have before placing a bid. This will ship to USA via Parcel Select or International via USPS Priority. Thanks and good luck. Check out my other items! Be sure to add me to your favorites list!
|
|
|
VTG LS Starrett Surface Gage Gauge 257 Machinist Tool Made USA
VTG LS Starrett Surface Gage Gauge 257 Machinist Tool Made USA Vintage LS Starrett Surface Gage 257 Machinist Tool Very good condition. 9" Tall_gsrx_vers_486(GS 6.5.1(486)
|
|
|
Taylor Hobson Surtronic 3P Profilometer Surface Measuring Gage DS9
Taylor Hbston Surtronic 3P Surface Measuring Gage The Federal Calibration standard is not included and is only for reference. The unit read 126 versus a nominal of 122. The unit can be easily adjusted with a screwdriver. Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support ... moreyou throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
VTG RUPERT SURFACE ROUGHNESS GAGE (ADVERTISING FOWLER PRECISION TOOLS)
FOR YOUR CONSIDERATION IS A VINTAGE ROUGHNESS GAGE SET MADE BY RUPERT CO. LTD. CHESHIRE, ENGLAND. THIS HIGH QUALITY SET INCLUDES 30 COMPARISON SAMPLES OF MACHINING ROUGHNESS AS FOLLOWS: FLAT LAPPING REAMING GRINDING HORIZONTAL MILLING VERTICAL MILLING TURNING THIS SET COMES IN A LEATHER FOLDER WITH ALL OF THE PERTINENT INFORMATION ON A SEPARATE SHEET. THIS IS AN ADVERTISING SAMPLE FROM FOWLER PRECISION TOOLS
|
|
|
LUFKIN SURFACE GAGE No. 520, MACHINIST & WOODWORKING TOOLS
Normal 0 VINTAGE LUFKIN SURFACE GAGE No. 520. IN EXCELLENT WORKING CONDITION. THE BASE IS 3-1/4” LONG X 2-1/2” WIDE X 1” THICK. THE MAST IS 12-1/2” LONG X 5/16” DIA. THE SCRIBE IS 6” LONG. THERE ARE NO ETCHINGS. THIS TOOL IS IN NEXT TO NEW CONDITION. PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment. Insurance is included.
|
|
|
Taylor Hobson Surtronic 3P Surface Measuring Gage Profilometer DS10
Taylor Hobson Surtronic 3P Surface Measuring Gage Profilometer DS10 This unit is for parts or repair. It does not include a"chisel" or pickup. When the unit powers on it reads"E" Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout ... morethe transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
LUFKIN MITI - MITE MAGNETIC BASE INDICATOR HOLDER & SURFACE GAGE COMBINATION
HANDY LUFKIN MITI- MITE MAGNETIC BASE INDICATOR HOLDER& SURFACE GAGE COMBINATION: This item is a handy Lufkin Miti-Mite magnetic base indicator holder and surface gage combination tool. These are no longer made and I think they are one of the handiest multi use tools ever. There is a removable hardened and ground metal base which is slotted on one side and smooth on the other side which enables you to use it as a surface gage on a bench plate or surface plate. When you turn the release handle you can remove this plate and use the strong magnet base for attaching the tool to a machine. Engine, etc. for checking runout, parallelism, looseness, etc. There are a few dings on the plastic cover, but otherwise it is in good condition. The magnet is very strong. The small attachments included with it are all I found when going through my friend's ... moretools. They are not complete. But it is a start. The clamp and rod that attach to it are correct and make it completely usable. SALES WITH HEAVY OR MULTIPLE ITEMS PLEASE WAIT UNTIL WE CONTACT YOU WITH EXACT SHIPPING CHARGES. I WILL BE GLAD TO COMBINE SHIPPING. WHICH MAY MAKE THE TOTAL LOWER. LARGE OR HEAVY ITEMS OR ONES THAT ARE SHIPPED FARTHER MAY MAKE SHIPPING HIGHER. NEW HIGHER U.S.P.S. POSTAL RATES FORCE AN INCREASE IN POSTAGE FEES. I AM SORRY. I HAVE BEEN LOSING MONEY ON EVERY ITEM LATELY BECAUSE OF SHIPPING CHARGES. INSURANCE IS INCLUDED IN SHIPPING. UNLESS YOU STATE THAT YOU DO NOT WANT IT, AND AGREE TO ACCEPT THE RISK. In the next few weeks I will be selling precision toolmaker's tools that belonged to a good friend who started in the trade in the 60s and was a top notch toolmaker/modelmaker for many years. He made many of the tools and some were bought when American made precision tools were readily available. A few are not American made. Since I am a retired toolmaker/modelmaker I will try to describe the items that I am familiar with. If I am not familiar with an item I will try to research it and give the best description I can. I will be glad to combine
|
|
|
Machinist Toolmakers Surface Gage Spindle - Starrett 257B 12" Parts
Machinist Toolmakers Surface Gage Spindle- Starrett 257B 12" Parts Please refer closely to all photos before purchasing. Parts. Good cosmetic condition, incomplete set. Surface gage spindle by Starrett. 12" Length. This is an incomplete set sold AS IS. Thanks for looking- we appreciate your business! Please check out on eBay. Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description. The images show the ACTUAL or an ACCURATE REPRESENTATION of item that you are bidding on. All images are photographed by us and are the exclusive property of TELEVISIONARY Communications and/or The Reuseum. Use of any material in this advertising is prohibited without express ... morepermission. Unless otherwise stated above. This item is sold strictly"AS IS, with no warranty. We TRULY& HONESTLY try to represent our auction items to the best of our abilities. Please understand that we are sometimes unfamiliar with an item. That said. You might notice times that the description is very brief or nonexistent. To compensate for our lack of expertise we start prices very low, with the intent that you might be interested in the item for its parts and AS IS condition. Please take this in consideration when bidding on our auctions. We try to take weekends off in order to preserve our marriages. If this auction is scheduled to end during the weekend. We'll be in contact with you on Monday. If you have technical questions, or need shipping quote information about this or any of our other auctions, please try to ask them by Friday morning. Any technical or shipping questions received over the weekend most likely will not be answered before the close of the auction. Shipping Information: Bidders outside the Continental U.S. including bidders in Alaska. Hawaii, Puerto Rico& our friends in Canada) MUST contact us to determine(non-freight) shiping costs!
|
|
|
ECLIPSE Universal Surface Gage with 9-1/2" spindle (made in England)
Case-hardened base with smooth painted finish. Base has two retractable gauge pins to set against an edge to permit uniform motion. Bottom of the base is grooved for cylindrical work. Front of the base recessed for depressing spindle below base level. Spring-loaded spindle support bracket and fine-pitch adjustment screw allows for fine tilt adjustment. Clamp that can be locked in place at any point along the 9-1/2" spindle. Hardened scriber that can be set to any position. At any angle along spindle. Spring-loaded scriber holder can be used to attach any standard-sized dial test indicator. Please note: This surface gauge does NOT come with a dial test indicator. See my other ad to buy the Fowler XTest dial test indicator with another surface gauge)
|
|
|
Vintage Starrett Surface Gage Gauge No. 257C Machinist Tool Original Box
Vintage Starrett Surface Gage Gauge No. 257C Machinist Tool Original Box Weight 3 pounds 13 oz. 3-1/2" base with 12" Spindle stamped Starrett-scribe is about 9-1/2" in length Very nice complete Gage-No etching on tool Lid of the box is taped in one corner and shows signs of wear. Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
|
|
|
Machinists 5/10spec *BUY NOW* PERFECT Brown Sharpe Large Surface Gage
The real deal None better==this is the finiset surface gage you will ever find. Period. See all my great gages + combine) Cheap real cost and impossibly fast shipping HONEST Shipping Costs Starrett S154LZ 1-3/4" 5-1/16"L x 9/32"Thk Adjustable Parallels Set BTW- The most honest person here when it comes to shipping" Shipping and handling. Very reasonable,not like alot of other sellers" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ... more^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra items or similar scams! NOTE SHIPPING COST + COMPARE TO OTHERS-WHY GET BONED? COMBINE SHIPPING-ALL SHIPPING IS AT REAL COST-I DO NOT MAKE MONEY ON SHIPPING(AM I THE ONLY PERSON ON EBAY THAT DOESN'T? NO STUPID PRICE NO ABUSIVE SHIPPING COSTS! COMBINE SHIPPING! NOTE fair cheap non-profit
|
|
|
Brown And Sharpe 9" Universal Surface Gage Small Stamped 621 USA Good Shape!
I have for sale a used brown and sharpe surface gage model 621 it is in good shape as you can see in the pictures some of the paint on the top is coming off does not affect the functionality at all. the base looks to be re ground and in great shape. it does have the initials GAS etched lightly on the back as seen in pictures. this is just for the base and the post nothing else is included. this item is being sold as is with no returns or refunds.
|
|
|
Starrett - Machinist - Inspection Surface Gage w/ Scribe - Toolmaker
L. S. Starrett. Machinist Inspection Spindle Surface Gage with Scribe. 12 inch Mast. Toolmaker Tool. Remains in Very Good Condition. Made by The L.S. Starrett Co. Athol. Mass. in the U.S.A. Reasonable Offers Will Always Be Considered! SEE PICTURES) Any Question's. Please Feel Free To Email Me. Or call(217) 529-7314 Free Local pick-up is always available(south-side of Springfield.IL. I combine shipping to save YOU $$$$! Please View Other Item. I have Listed! Shipping Charges are for the Lower 48 States. I Will Ship Worldwide. Please Email for Shipping Quote. In the unlikely event that you are not completely satisfied with your purchase. Please email me prior to leaving any negative feedback and allow me the opportunity to correct the problem, if necessary. I will offer a full refund if any error was made on my part. Your satisfaction is ... moremy priority and I want to make sure that we both have a pleasant eBay experience. We package fragile item to withstand the Careless shipping policies of most carriers. We would prefer to have your item arrive safely. So we can avoid dealing with insurance companies.
|
|
|
Brown & Sharpe universal surface gage 599-622-222 EDP 45497
Rare CPUs Brown& Sharpe universal surface gage 599-622-222 EDP 45497 Condition: Light Used. In Great Condition What's Included: just the universal surface gage Item Condition- Product condition is exactly as stated in the listing. Please check the item description and condition details prior to making a purchase. Payment- Please if you don’t intend to pay shortly following the purchase. We encourage you to postpone your purchase until you’re able to make the payment. Winning bidders must pay via PayPal using a CONFIRMED address. As we WILL NOT ship to any other address that’s not listed on the PayPal transaction. Shipping- Shipping time and cost are always listed in the item description. So please make sure you check those details. We’ll inform you. In the rare event and due to unforeseen circumstances beyond our control, if shipping ... moregets delayed. We use FEDEX. UPS and USPS, but we reserve the right to select which carrier we use depending on the delivery address. We do not ship on Saturdays. Sundays and Holidays, so if payment is made on Friday, the package won’t be shipped till Monday. We will not ship to a P.O.Box address If a signature is required. Returns- Any claims made after the 14 day return period will be denied. If your package arrives damaged. You must notify us and the shipping company at the time of delivery, All damage claims must be reported to us within 24 hours of receipt. So any claims submitted afterwards will be denied
|
|
|
STARRETT MACHINIST TOOL #257D HARDENED STEEL SURFACE GAGE AND SCRIBE 12/18" RODS
STARRETT SURFACE GAGE WITH SCRIBER#257D CAST IRON BASE SIZE 3.5 0 0 X 3.187 COMES WITH 12" AND 18" RODS 9" SCRIBE THIS BASE IS IN NICE CONDITION NO RUST. SMOOTH EDGES PLEASE LOOK AT THE PHOTOS AND ASK A QUESTION IF YOU HAVE ONE I DO MY BEST TO ACCURATELY DESCRIBE ITEMS WOULD BE A GREAT ADDITION TO YOUR TOOL BOX All items come from smoke free home. WE ACCEPT PAY PAL FOR PAYMENT Payment should be made within 3 days of auction end unless you are bidding on another of our items. WE WILL COMBINE SHIPPING ON OUR ITEMS See my feedback and bid with confidence. Thank you! CONTINENTAL USA SALES ONLY NO RETURNS
|
|
|
Excellent! CRAFTSMAN Surface Gauge Gage No. 4055 Made in USA - Free Ship!
Excellent! CRAFTSMAN Surface Gauge Gage No. 4055 Made in USA- Free Ship! Move mouse over images to see larger version Click to view supersized image Please refer to the photos. They are an important part of the description. I have tried to include many views so you can get an accurate understanding of the age and condition of this item. I have no room left to collect more"things" so. I am left with no choice but to significantly reduce the volume of tools. Antiques and collectibles that have added up over the past 30 years. Please email if you have questions or require additional photos. T hanks for looking and good luck! My Guarantees to You: Guaranteed Prompt Shipping: Your item will normally be shipped within 1 business day of your payment. I will email you if. For any reason, there is a delay. Guaranteed Authentic: Your item ... morewill be delivered to you as it has been shown and described in this listing. I personally photograph ad describe all of my items so what you see is what you get. Guaranteed Quality Packaging: I make every effort to carefully package your item in a way that ensures that you'll receive it in the same condition as described. Guaranteed Delivery: Your item will normally be shipped to you using traceable delivery methods. All US shipments are through the US Postal Service by USPS First Class or Priority Mail. European shipments are through the Dutch or German post. Sometimes purchases will be insured for you at my expense and subsequently will require a signature upon delivery. Have Questions? Feel free to e-mail me any questions you may have. Please allow up to 12 hours for a reply due to my work schedule. Thanks for your interest in DDWH Antique Tools& More*
|
|
|
STARRETT 257B SURFACE GAGE OLD VINTAGE PRECISION INSPECTION TOOL GRINDER MILL!!
STARRETT 257B SURFACE GAGE WITH HARDENED STEEL BASE IN EXCELLENT USED CONDITION WITH BOTH RODS INCLUDING A 12" X 3/8" STARRETT ROD IN IT! VERY NICELY MADE AND SILKY SMOOTH. BASE HAS NO ENGRAVING AS SHOWN. BASE MEASURES BY CALIPERS 2-3/8" 2.353" WIDE) X 1-1/8"1.122" TALL X 2-13/16"2.8158" LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED. GAGE ALSO HAS THE(4) 3/16" PINS IN BASE. CURRENT LIST AT MSC IS $213.00 FOR A NEW GAGE ON PAGE 1343! SAVE SOME$$ HERE! GAGE WEIGHS 4 LBS 1 OZ SO WITH THE 12" ROD AND WEIGHT IT WILL HAVE TO GO FLAT RATE ESP IF TO CA. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! THANKS FOR LOOKING! PLEASE LOOK AT OUR MACHINIST ITEMS. WE HAVE MANY VERY HARD TO FIND ITEMS! ... moreI will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I USE A HERMANN SCHMIDT SQUARING BLOCK OR VISE AND A HERMANN SCHMIDT MAGNETIC SINE CHUCK FOR ACCURACY AND THEY DO VERY WELL BOTH PICTURED IN MANY AUCTIONS! I DO NOT JUST CLAIM TO HAVE AND USE THEM I DO USE THEM AND SHOW THEM IN MANY AUCTIONS! I HAVE MANY MANY MORE PARALLELS. PARALLEL SETS, BLOCKS,1-2-3 BLOCKS AND MATCHED SETS OF 2 AND 4 PLUS V-BLOCKS, AND SETS OF V-BLOCKS TO LIST KEEP WATCHING! ALL TOOLS ARE IN GREAT SHAPE DUE TO STORAGE IN A GERSTNER
|
|
|
Vintage Starrett Surface Gage Toolmaker Machinist Precision Inspection Layot
Made by the L.S. Starrett Co. Athol, Mass. USA. Pat. March 17. 1897. The Base is 1-27/54" Wide x 2-1/8" Long x 11/16" High. The Mast is 4-1/16" Long. The Scriber is 3-1/8" Long. This tool is in good used working condition and will be a nice addition to your collection. FEATURES: Ground base for an accurate reference surface. V” groove in the base for cylindrical work. A very positive fine adjustment through a rocker arm that provides smooth and accurate settings. Grooves on the side of the base for a sure and easy grip. Nicely tapered scribers. So that you can see what you are doing. Scriber and spindle holes are in permanent alignment. Please have a close look at the photos and email me with any questions.
|
|
|
Starrett No. 56A Toolmakers Universal Surface Gage New In Original Box
A nice old A-56 Has Jakes scratched On the bottom very lightly see my photo. Posted with
|
|
|
FEDERAL SURFACE INDICATOR GAGE MODEL XLI 10000
Check out my! FEDERAL SURFACE INDICATOR GAGE MODEL XLI 10000 Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $200 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 CONTINENTAL STATES ... moreAND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US VIA E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive
|
|
|
Brown and Sharpe V Block Surface Height Gage 620
Up for auction is a Brown and Sharpe Gage No. 620. It's in great shape. Posted with ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13ea1997442-0xf5-
|
|
|
2 Mitutoyo Surface Gage Toolmaker CNC Machinist Precision Inspection (TI)
2 Surface plate tools. I know noting about these except 1 is a Mitutoyo and the other maybe CNC? Machinist will know. Thank you.
|
|
|
VINTAGE SURFACE GAGE, BROWN & SHARP, NO 622 PRECISION TOOL, REPAIR OR PARTS
YOU ARE BIDDING ON A VINTAGE SURFACE GAGE. BROWN& SHARP MFG CO. PROVIDENCE, RI. NO 622. TO BE"SOLD AS IS" IT CAN POSSIBLY BE REPAIRED OR FOR PARTS. GAGE IS IN GOOD USE CONDITION WITH NO CHIPS, CRACKS, BREAKS, OR REPAIRS. IT MEASURES APPROXIMATELY 4" LONG, 3 1/4" WIDE AND 2 1/4" HIGH. IT READS: HARDENED, 622, BROWN& SHARP MFG CO. PRIVIDENCE, RI U.S.A. LOGO WITH TRADE MARK, SEE PICTURES
|
|
|
NICE TOOLMAKER MADE SMALL SURFACE GAGE FOR CONFINED WORK AREAS
NICE TOOLMAKER MADE SMALL SURFACE GAGE FOR CONFINED WORK AREAS: This toolmaker made small surface gage would be useful in small work areas inside of castings or other confined places. It measures.953 X 1.486 X 3.023. It has a serrated base to gather up any chips or dust on the surface plate or work surface. It is in very good condition. It has the original makers name in the slot on the back top surface. SALES WITH HEAVY OR MULTIPLE ITEMS PLEASE WAIT UNTIL WE CONTACT YOU WITH EXACT SHIPPING CHARGES. I WILL BE GLAD TO COMBINE SHIPPING. WHICH MAY MAKE THE TOTAL LOWER. LARGE OR HEAVY ITEMS OR ONES THAT ARE SHIPPED FARTHER MAY MAKE SHIPPING HIGHER. NEW HIGHER U.S.P.S. POSTAL RATES FORCE AN INCREASE IN POSTAGE FEES. I AM SORRY. I HAVE BEEN LOSING MONEY ON EVERY ITEM LATELY BECAUSE OF SHIPPING CHARGES. INSURANCE IS INCLUDED IN SHIPPING. UNLESS ... moreYOU STATE THAT YOU DO NOT WANT IT, AND AGREE TO ACCEPT THE RISK. In the next few weeks I will be selling precision toolmaker's tools that belonged to a good friend who started in the trade in the 60s and was a top notch toolmaker/modelmaker for many years. He made many of the tools and some were bought when American made precision tools were readily available. A few are not American made. Since I am a retired toolmaker/modelmaker I will try to describe the items that I am familiar with. If I am not familiar with an item I will try to research it and give the best description I can. I will be glad to combine shipping on multiple items. If you would like additional photos or information please email me. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hermann Schmidt MG-1 SURFACE GAGE VINTAGE PRECISION INSPECTION TOOL GRINDER MILL
Hermann Schmidt MG-1 SURFACE GAGE INDICATOR STAND(TRANSFER/ SQUARENESS GAGE) comes as shown with a B&S 599-7035-3(000050" test indicator as shown. MG-1 currently lists for $335. 00 and B&S indicator lists for $295.00. This set-up is a $630.00 value! BASE DIMENSIONS: 3 1/2" LONG x 2 1/2"WIDE x 1 3/8 THICK 9" HIGH TO TOP OF UPRIGHT POST 13" HIGH WITH INDICATOR MOUNTING ROD IN VERTICAL POSTION INDICATOR MOUNTING ROD IS.312 IN DIAMETER AND 4 3/4" LONG WITH THREE DIFFERENT MOUNTING DIAMETERS: 217. 220 AND.250 DIAMETERS UPRIGHT POST DIAMETER: 562 DIAMETER BOTH THE INDICATOR MOUNTING ROD& THE UPRIGHT POST HAVE A HARD CHROME FINISH TO PREVENT WEAR HARDENED FINE PITCH SCREW 40 T.P.I. WITH LARGE ADJUSTMENT KNOB FOR PRECISE CONTROL BASE IS HARDENED AND LAPPED BACK OF BASE IS GROUND FOR CHECKING SQUARENESS THIS ... moreINDICATOR STAND IS IN EXCELLENT CONDITION WITH THE EXCEPTION OF A NAME THAT HAS BEEN LIGHTLY ENGRAVED ON THE SIDE. IT APPEARS TO HAVE BEEN USED VERY LITTLE IF AT ALL. EVERYTHING MOVES SMOOTHLY& FREELY& THE INDICATOR ARM LOCKS UP TIGHTLY. JUDGING FROM THE LARGER DIAMETER UPRIGHT POST(562 AS OPPOSED TO.500) AND THE LONGER INDICATOR MOUNTING ROD THIS GAGE APPEARS TO BE A NEWER VERSION BROWN& SHARPE MODEL. WHICH IS PRICED IN THE MSC CATALOG AT OVER $500. 00 The Design. The innovative design of the Murkens Gage makes it one of the most rigid bases you will ever use. This rigidity greatly increases the repeatability of your indicator while decreasing the number of adjustments necessary during use. The simplicity of the mechanism results in fewer moving parts to repair or gnt replace. The overall performance of this gage is most impressive. The Features. Spring steel front for rigidity. Hardened-40 screw with extra-long brass bushing. Blackened for appearance and rust resistance. Built-in bar for checking squareness. Hardened bottom with dirt grooves. Large diameter adjusting knob for sensitivity. Wrench hole in end of chromed rod for tightening/loosening. Spring-loaded i
|
|
|
MACHINIST TOOLS LATHE MILL Mini Surface Gage & Starrett Last Word for Sherline
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
|
Brown & Sharpe 622-C 12" Universal Surface Gage - EXC
Brown& Sharpe 622-C 12" Universal Surface Gage- EXC Item Description Shipping and Payment Spuds will combine shipping on multiple items when possible. Please feel free to e-mail me if you have any questions. Alaska. Hawaii along with US Territories and APO's shipped via USPS Priority Mail may require additional shipping charges. INTERNATIONAL BIDDERS. WE WILL ACCEPT ONLY U.S. FUNDS. Please check out Spuds' other auctions. New items added every day. inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
STARRETT NO 257 B UNIVERSAL SURFACE GAGE GAUGE 2 SPINDLES SCRIBE
VERY NICE STARRETT FULL SIZE SURFACE GAGE WITH SCRIBE AND A 10 AND 17 INCH SPINDLE BOTH MARKED STARRETT.THE LONGER SPINDLE ACTUALL HAS A REMOVABLE TOP PIECE SO IT ACTUALLY HAS A 3RD THREADED ROD EXTENSION THAT CAN BE USED.VERY NICE TOOL WORKS GREAT. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
STARRETT SURFACE GAGE #56 SERIES 7" USED
P lease use the zoom feature and review any and all of the photos. The photo/photos are provided so that you can examine the item/items more closely and should be considered as a part of my description. Please if you should have a question. Email me. PLEASE DO NOT PAY FOR MULTIPLE ITEMS UNTIL I ISSUE AN INVOICE THAT REFLECT YOUR SHIPPING DISCOUNT. Your shipping cost is based on the packed weight only. There is never a handling fee. I will ship by priority or parcel.your choice.I DO NOT SHIP OUTSIDE THE U.S.PLEASE NO EXCEPTIONS. TAKE A MOMENT AND SEE OUR FEEDBACK PROFILE AND BE SURE TO READ MY POLICY BEFORE BIDDING. I do not take returns and all sales are final. BUT.please before leaving negative or even neutral feedback. at least email me so that if possible. I can resolve your concern. I WANT YOU TO BE HAPPY WITH YOUR PURCHASE.RETURN CUSTOMERS ... moreARE VERY IMPORTANT TO US.
|
|
|
Gage Gauge Stand Height surface
You are bidding on a Gage stand with Gage. I am unsure what type of measuring this is for. Item measures variable from 13 inches to 24 inches high. Not sure of the accuracy of the Gage but most any should fit the stand. Sold as is. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Set Mitutoyo Metal Surface Gage Code No. 7030 Wooden Box
Set Mitutoyo Metal Surface Gage Code No. 7030 Wooden Box WARNING: Due to the overwhelming losses shipping First Class International we will no longer offer this service. We ship priority only now- sorry. We buy at a wide range of places including garage sales. Basements, estate sales, barns, dusty, musty, smoked-in homes and so on. With that said most items you buy from us need cleaning. We try to take enough pictures to help in the description because we are no experts in the things we sell. you are) so look at the pictures. We offer a money back guarantee if you are unhappy for any reason. 100% SATISFIED or your money back! We do our best to describe the items but if you have questions please ask before you bid. With that all out of the way here is the next item. This is a used set of 4 pieces. Mitutoyo Surface Gage Code No. 7030 measuring ... more9 1/2" long, 2 3/8" wide, 2 1/2" tall. I am no expert and not know the names of pieces included, please see images. Set comes in wooden box which is dirty, scratched, marker writing on end. Check out my store for other Tool listings. Please view images closely and carefully; any questions. Let us know. Thanks for looking!
|
|
|
BROWN & SHARPE No. 620 HARDENED UNIVERSAL SURFACE GAGE GAUGE 2 1/4 X 1 1/2" *A3
BROWN& SHARPE No. 620 HARDENED UNIVERSAL SURFACE GAGE GAUGE 2 1/4 X 1 1/2" Condition/I n fo: Very good condition Welcome to my Friday night auctions. Last weeks auctions auction close one minute apart and new ones go up. Action starts at 9:00PM Eastern time. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do ... moreNOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
(#0345) Collectors! STARRETT No.52B Surface Gage Patented 1882 - Free Shipping
STARRETT No.52B 12" Surface Gage Patented 1882. Uncleaned. In"as found" condition. Scriber clamp is marked" PAT. MAR. 21. 1882" Condition: Overall very good. With an old repair to base clamp. It's done nicely and only adds to the history. No personal engravings. Looked great in my tool collection. Free Priority Mail shipping. I do feedback after buyer acknowledges receipt of the item by contacting me or be doing feedback. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Brown and Sharp Surface Gage - Heavy Duty Spindle, Scribe Machinist Toolmaker
For sale is a Brown and Sharp Surface Gage. In good condition. Shows signs of wear and discoloration. Minor some rust. There may be a name etched on the suface.
|
|
|
Starrett Surface Gage # 56, 4" and 7" Rods - Spindle, Scribe Machinist Toolmaker
For sale is a#56 Starrett Surface Gage 4" and 7" Rods. In very good condition. Shows only normal signs of wear. Name scribed on surface. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ec275ee16-0x105-
|
|
|
BROWN & SHARPE NO 620 SURFACE GAGE GAUGE INDICATOR HOLDER SMALL SIZE
VERY NICE CONDITION NICE TOOL. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
Vintage #57C Starrett Universal Surface Gage w/ 12" spindle, Good Cond.
Up for bid is a Vintage#57C Starrett Universal Surface Gage that is in Good Condition. It has no etchings. The base measures 3 3/8" x 3 3/4" the spindle is 3/8" in diameter and is 12" in height. Please check my feedback and bid with confidence. My goal is to make every sale a positive experience. Please notify me if you win an auction and are interested in other items that do not end within 48 hrs of the auction you won. Please check out my other machinist tools. I will combine shipping if possible. Feel free to ask questions. And thanks for looking.
|
|
|
Starrett No. 56-B Surface Gage in Original Box with Extra Items
Starrett No. 56-B Surface Gage in Original Box with Extra Items Well cared for item! Please view actual photos Being listed for the estate of the original owner. We gladly combine items to save on shipping cost. Please wait for a combined invoice if you have won multiple items.
|
|
|
SURFACE GAGE BROWN&SHARPE 621 VINTAGE PRECISION TOOL INSPECTION GRINDER LAYOUT!!
BROWN&SHARPE No. 621 HARDENED BASE SURFACE GAGE. LOOKS LIKE IT IS BRAND BEW AND NEVER USED BUT I WILL SELL IT AS USED. BASE IN EXCELLENT LIKE NEW CONDITION WITH A 12" X 5/16" ROD IN IT! VERY NICELY MADE AND SILKY SMOOTH. BASE HAS NO ENGRAVING ANYHWERE I CAN SEE AS SHOWN. COMES AS SHOWN IN PICTURES. BASE MEASURES USING CALIPERS 2-1/2" 2.509" WIDE) X 1" 984" TALL X 3-1/8" 3.112" LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED. GAGE ALSO HAS THE(2) 3/16" PINS IN BASE. CURRENT LIST AT MSC IS $215.00 FOR A NEW GAGE ON PAGE 1343! SAVE SOME$$ HERE! GAGE WEIGHS 2 LBS 4 OZ SO WITH THE 12" ROD AND WEIGHT IT WILL HAVE TO GO MEDIUM FLAT RATE ESP IF TO CA. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR ... moreLOOKING! THANKS FOR LOOKING! PLEASE LOOK AT OUR MACHINIST ITEMS. WE HAVE MANY VERY HARD TO FIND ITEMS! I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I USE A HERMANN SCHMIDT SQUARING BLOCK OR VISE AND A HERMANN SCHMIDT MAGNETIC SINE CHUCK FOR ACCURACY AND THEY DO VERY WELL BOTH PICTURED IN MANY AUCTIONS! I DO NOT JUST CLAIM TO HAVE AND USE THEM I DO USE THEM AND SHOW THEM IN MANY AUCTIONS! I HAVE MANY MANY MORE PARALLELS. PARALLEL SETS, BLOCKS,1-2-3 BLOCKS AND MATCHED SETS OF 2 AND 4 PLUS V-BLOCKS,
|
|
|
Antique Patent 1896 Starrett Surface Gage 257 57 NICE Old Machinist Tool FreeS&H
Excellent and Rare Early Antique and/or Vintage L.S. Starrett Large Surface Gage with 11" mast in terrific preowned condition. Especially for it's age This fantastic and great old tool was formerly used by a master metal worker and machinist in Massachusetts. And I attained it during the liquidation of his estate. It has been part of my personal collection for several years and now it is time to move it along. The base itself measures approximately 3 5/8" by 3 5/16" weighs right at 3 1/2 pounds total, the mast is right at 11 1/2" with the ball top, and the scribe is right at 8 1/4" long. A great old tool for machinists, machine shops, collectors and resellers too! The mast is marked Starrett with the great early patent date yet the base is unmarked. The only marking I can find of any kind are the tiniest, apparently ... moreprevious owners markings, that I have ever seen. The 3 letter, W.C.C. marking measures only approximately 1/8" 3/16" total for all 3 letters, it's tiny and virtually entirely unnoticeable. Also easily removable or modified by machinists! OVerall the condition is phenomenal, and it is exactly at it was found, it has not even been cleaned yet in any way! A great tool to add to rare tool collections or to throw in your tool box ready to go Please check the pictures carefully for the exact overall condition Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A.
|
|
|
Surface Gage and set up Angle Plate
Nice Set. 1) Surface Gage and(1) Small Angle Plate. Great for Inspection or Shop Tools.
|
|
|
Vintage Lufkin Model 520 Surface Inspection Gage
Up for auction is this vintage Lufkin#520 Surface Gage. Gage is used but in fully operational condition. Great condition. Payment Payment is due within 3 days by PayPal. After 3 days. EBay will automatically initiate a case to resolve. If there is a problem, please let me know as soon as possible. Shipping I ship packages within one working day after receiving your PayPal payment Mon-Fri. I do not ship on Saturday. Shipping to USA only. Problems/Returns I accept returns within 14 days after receiving your item. Return postage is paid by the buyer. Please look closely at the pictures and listing to be sure of what you are buying. If you have any questions or problems after receiving your item. Please contact me. No returns on International items. Feedback I leave feedback when your transaction is complete. If you are considering leaving anything ... morebut positive feedback please contact me and let me know first so I can try to make it right. THANK YOU FOR LOOKING AND HAPPY BIDDING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13edbf77a4b-0xff-
|
|
|
Vintage Brown & Sharpe Model 622 Surface Inspection Gage
Up for auction is this vintage Brown& Sharpe#622 Surface Gage. Gage is used but in fully operational condition. Great condition. Payment Payment is due within 3 days by PayPal. After 3 days. EBay will automatically initiate a case to resolve. If there is a problem, please let me know as soon as possible. Shipping I ship packages within one working day after receiving your PayPal payment Mon-Fri. I do not ship on Saturday. Shipping to USA only. Problems/Returns I accept returns within 14 days after receiving your item. Return postage is paid by the buyer. Please look closely at the pictures and listing to be sure of what you are buying. If you have any questions or problems after receiving your item. Please contact me. No returns on International items. Feedback I leave feedback when your transaction is complete. If you are considering ... moreleaving anything but positive feedback please contact me and let me know first so I can try to make it right. THANK YOU FOR LOOKING AND HAPPY BIDDING
|
|
|
VINTAGE The Lufkin Rule 522 Scribing Block/Stand Surface Gage Tool Gauge Scribe
The Lufkin Rule Co. No.522 Scribing Block/Stand Surface Gage with Scribe This vintage tool is in very nice condition Check my feedback and bid/buy with confidence
|
|
|
Mitutoyo indicator gage stand granite surface plate Graphlate
Up for sale is a Mitutoyo Graplate 6" x 6" surface plate. Indicator stand, surface gage. Its 2 1/4 inch thick and the indicator base rod(7 1/2 inches tall) screws into the base, includes swivel clamp. The arm is 7 inches long and has fine adjustment and is in very good condition. Accuracy.00005 Grade BC-1 Size 6 x 6.
|
|
|
Vintage LUFKIN Universal Surface Gage 520C With ORIGINAL Box
Up for bid is a Lufkin Universal Surface Gauge Model 520 C In Very Good Condition. Comes a 12" spindle and original box in fair condition. Winning bid pays actual shipping. Good Luck!
|
|
|
Granite indicator base surface gage stand 15" travel 6" x 8" base
Up for sale is a used indicator stand/surface plate/ gage stand. It has a 15" tall post and the mount has fine adjustment. The post has some staining but is in excellent working condition and the surface plate is smooth without major imperfections. I will remove the post for shipping.
|
|
|
GE Surface Roughness Gage, Microfinish Surface Finish Scale - 2 Gages & Case
GE surface roughness scale- microfinish surface finish scale Cat no: 342x60" 342x61 2 Gage's in 1 double sided pouch Looks like great condition! Will always combine shipping! Posted with
|
|
|
Machinists 5/27B (7) Craftsman (Made By Brown & Sharpe) Beam For Surface Gage
See Pic 5/16 x 12" Absolutely Straight- Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping ... moreby combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABU
|
|
|
STARRETT No.257B UNIVERSAL SURFACE GAGE with 9" & 12" RODS
YOU ARE LOOKING AT A STARRETT No.257B UNIVERSAL SURFACE GAGE WITH 9" 12" RODS IT IS IN GOOD WORKING CONDITION.
|
|
|
Machinists 5/29 PERFECT Case Hardened Starrett Surface Gage
Mint-never used? Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY ... moreLOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY
|
|
|
VINTAGE LUFKIN 522 522A SURFACE GAGE GAUGE Machinist Tools Lathe Mill Machinist
Vintage Lufkin Rule Co. 522/ 522A Surface Gage Includes Box as Shown Up for offer is a nice Vintage Lufkin Rule Co. Model 522 or 522A Surface Gage. This model is getting hard to find. Condition is overall nice as shown in photos. Box is marked 522A and base of surface gage is marked 522 as seen in photos. Item has been used and shows some wear including scratches. Marring and some discoloration from use and storage as seen in photos. Not abused. Has original owners name on base as shown. Not abused. Seems to work well. Box shows wear from use and storage as shown. Includes only what is shown in photos. Sold as-is. Please use ZOOM feature to view all photo's before bidding or buying. Overall. This looks to be a great vintage Lufkin for your vintage machine shop set-up. Great for your lathe, mill or anywhere else this would be used. Would ... morealso make a great display piece for your office, etc. Get this one while you can. Please Read Before Bidding or Buying I have represented this item to the best of my limited ability. Buyers responsibility to examine all photos wih care and read description fully. Please ask any questions before bidding or buying. Buyers responsibility to determine condition. Fitment, use, useability,function and collectability. As this is a pre-owned item it may have imperfections both mechanical and/or physical that were either not noticed or deemed insignificant due to it's vintage status. Please ask any questions before bidding or buying. USA SALES ONLY NO EXCEPTIONS NO FOREIGN SALES PAYPAL ONLY NO EXCEPTIONS PAYMENT DUE WITHIN 2 BUSINESS DAYS ITEM GENERALLY SHIPS WITHIN 1 BUSINESS DAY OF PAYMENT ITEM SHIPS VIA USPS WITH DELIVERY CONFIRMATION SHIPPING FEE REFLECTS POSTAGE. DELIVERY CONFIRMATION, INSURANCE IF INCLUDED AND PACKAGING SUPPLIES 14 DAY RETURN POLICY(SEE DETAILS BELOW) RETURN POLICY PLEASE REVIEW THE EBAY RETURN POLICY FOR BUYERS TO DETERMINE IF YOUR ITEM MEETS THE REQUIREMENTS FOR RETURN STATUS. ANY BUYER TRYING TO MANIPULATE THE EBAY RETURN SYSTEM OR DEEMED TO BE USING
|
|
|
Squareness Gauge Kit (like Squarol type of surface gage)
Toolmaker made. Hardened 55-60 RC. Used but in excellent condition. Designed to be used on a surface plate to measure squareness, set to zero with a master square. Includes Mitutoyo.0001" indicator. A very consistent and accurate instrument. The contact at the bottom has adjustments for height. The pointed base sometimes chatters a bit but I don't know why. The only engraving is on the indicator.
|
|
|
Surface Gage, Vintage Brown & Sharpe Machinist / Toolmaker / Inspection Gauge
For your Consideration is this Vintage i s this Brown& Sharpe Surface Gage. Brown& Sharpe Mfg. Co. Providence, R.I. USA) Model No 621. The Base measures 2-7/16" Wide x 3-3/16" long x 1-13/16" High. The Mast is 9-1/2" Long.The Scribe is 9-1/8" Long. T his tool is in good used working condition and will be a nice addition to your collection. Please see the pictures and email with any questions. Features common to all Surface Gages/ Gauges: Ground bases for accurate reference surfaces*V groove in the base for cylindrical work* A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings* Grooves on the side of the base for a sure and easy grip* Nicely tapered scribers. So that you can see what you are doing* Scriber and spindle holes are in permanent alignment" Please ... moretake a look at my other Ebay Stores. I have a lot of nice items listed there. MB3-4458-10 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
Starrett Surface Gage 257B Excellent Condition In Original Box 9" & 12" Spindles
UP FOR AUCTION IS: STARRETT SURFACE GAGE No. 257B* Comes in Original Box Base Measures 2 7/8" x 2 3/8" 9" and 12" Spindles and Scriber Included. Surface Gage is in Excellent Condition with little to no signs of use Please view photos for more details and if you have questions please feel free to ask. Posted with
|
|
|
Brown Sharpe England Magnetic surface gage tool machinist toolmaker
you get what you see except for the $1.used.magnetic works.on off knob is stuck in the on position.has wear. I will combine shipping.$1 handling per auction on combined orders only.On combined orders I charge what it costs me to ship plus $1 handling per item) Connecticut buyers to pay 6.35% sales tax. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
 |