|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$3.50 Shipping Condition: New – Open box Location: Thompson, United States 4R GRADUATION. BROWN AND SHARPE. 12" TEMPERED STEEL. BLADE ONLY FOR.087" BLADE THICKNESS. COMBINATION SQUARES.
Buy It Now
Free Shipping Condition: New – Open box Location: South Hackensack, United States Solid Lathe (Dead) Half Center. High Speed Steel Tipped. Half Centers are relieved on one side to provide extra grinding wheel clearance.
Buy It Now
$4.55 Shipping Condition: Used Location: Rochester, United States This listing is for a Brown & Sharpe No. 540 Beveled-Edge Square ~ 4" with 2-1/2" Base. The bevel is on the top edge. See photos. Please email any questions.
Buy It Now
Free Shipping Condition: Used Location: Phelan, United States
$10.60 Shipping Condition: Used Location: Hillsboro, United States Brown & Sharpe 559 Toolmakers Surface Plate Square. This is from my personal tools. It's in great shape and very accurate.
Buy It Now
$6.95 Shipping Condition: Used Location: Farmington, United States Combination square is of course used and will show signs of wear from over the years as can be seen in photos. There is a faint owners mark etched into ... morethe rule. I will do my best to get a clear photo of it.
Buy It Now
$4.47 Shipping Condition: Used Location: Lititz, United States BROWN & SHARPE 12" COMBINATION SQUARE BLADE, TEMPERED NO. 4. HAS SOME AGING SPOTS, THE INCREMENTS ARE CLEAR.
Buy It Now
$5.99 Shipping Condition: Used Location: Riverside, United States Vintage 1938 BROWN& SHARPE No. 554 Adjustable Toolmakers Machinist Square With Factory Box Useful to toolmakers on small work. Blades may be adjusted ... moreto any point within their length and used where it would be impossible to use a fixed blade. Blades are held accurately in body and are readily reversible. Wide blade. 21/2" long is graduated on one side one edge in 32nds and the other in 64ths. Blade with beveled ends is extremely useful for establishing 60 and 45 degree angles, and for checking angles or thread tools. Narrow blade, 1/8" wide is graduated on one side in 32nds. All blades are tempered. Beam is hardended and ground. Good working condition. Factory box is in poor condition. Please see photos(BA48) 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-148d662b213-0x114-
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States BROWN& SHARPE COMBINATION SQUARE AND CENTER FINDER WITH 12& 24 RULE CONDITION: Used– Normal Wear& Tear– See Pictures BOTH RULERS ARE 8/16/32/64 ... moreGRADUATIONS Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a mistake in the AD the shipping difference will be immediately refund. Please e-mail with questions
Buy It Now
$11.60 Shipping Condition: Used Location: Mount Prospect, United States Cross listed - Check out the other Machinist Tools we have listed!
$8.70 Shipping Condition: Used Location: Holland, United States It is inscribed to Previous Owner.
Buy It Now
$6.25 Shipping Condition: Used Location: Bronx, United States The beam and blade are hardened, ground and lapped to ensure parallelism and straightness. The beam is grooved at the inner corner for clearance of burr ... moreor dirt. A picture is worth a thousand words.
Buy It Now
$17.80 Shipping Condition: Used Location: Saint Paris, United States | | | Brown& Sharpe 599-402-1204 Combination Square Set 12" 4R, Click to View Image Album DEALER OVERSTOCK SALE Brown& Sharpe 599-402-1204 ... more12" 4R Combination Square Set Combination squares are commonly used for layout. Set-up, checking heights and depths. And setting angles They are also often used as try squares. Center gauges, bevel protractors, and rules Blade Length: 12 in Graduation(s) 8ths. 16ths, 32nds, 64ths Includes: Blade. Square Head(Not Hardened) Center Head(Not Hardened) Square head features built-in level and scribe Manufacturer's Suggested Sell Price $115.00 This is inventory that has been in our warehouse for too long and now must be sold. They are new. Unused tools. Buyer pays UPS ground shipping or Priority Mail calculated at checkout. Multiple items will be combined for discounted shipping. COMBINED SHIPPING DISCOUNTS Back to Top IMPORTANT NOTE: FOR BEST COMBINED SHIPPING RATES ON MULTIPLE ITEMS. PLEASE REQUEST AN INVOICE TOTAL BEFORE YOU MAKE PAYMENT. Everything we sell is NEW. Not used or reconditioned unless otherwise noted. Most of our auctions are factory overstocks or liquidation items. Please see my OTHER AUCTIONS for more great deals or read ABOUT ME Be sure to visit my EBAY STORE. You can find hundreds of BRAND NAME tools and supplies at ridiculously low prices. With MORE arriving every week. Shop and compare. Abrasives. Saw blades Hand tools Rotary tools Precision tools. And more! Minnesota buyers add 7.125% sales tax. I will combine with other auctions to save on shipping costs. Payment, Our preferred payment method is Paypal. This is the only ONLINE payment method we offer. For non-paypal users. We do accept Visa, Mastercard or Discover Card by phone. At the end of our checkout process, you will be asked for the type of payment method you wish to use. If you select Paypal, you will be redirected to the Paypal website where you can log in and send payment. If you select Credit Card you will be requiered to call our toll free phone number in order to make your cr
Buy It Now
$6.75 Shipping Condition: Used Location: Greensburg, United States This vintage machinist square is a fantastic addition to any metalworking collection. Crafted by the renowned Brown & Sharpe Mfg. Co. in the USA, this ... moreNo. 540 steel square is made to withstand heavy use and provide precise measurements. See pictures for details.Excellent condition.
Buy It Now
Free Shipping Condition: Used Location: Phoenix, United States Precision Steel Toolmaker Square Brown& sharpe 540 4.5 Inch Please refer closely to all photos before purchasing. Used. Fair cosmetic condition. Precision ... moresteel toolmakers square by Brown& Sharpe. Model 540, 4.5" Long. Wooden case included. We are offering a 14 day NOT DOA guarantee(less shipping) on this listing. Thanks for looking- we appreciate your business! Please check out on eBay. Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description. The images show the ACTUAL or an ACCURATE REPRESENTATION of item that you are bidding on. All images are photographed by us and are the exclusive property of TELEVISIONARY Communications and/or The Reuseum. Use of any material in this advertising is prohibited without express permission. Unless otherwise stated above. This item is sold strictly"AS IS, with no warranty. We TRULY& HONESTLY try to represent our auction items to the best of our abilities. Please understand that we are sometimes unfamiliar with an item. That said. You might notice times that the description is very brief or nonexistent. To compensate for our lack of expertise we start prices very low, with the intent that you might be interested in the item for its parts and AS IS condition. Please take this in consideration when bidding on our auctions. We try to take weekends off in order to preserve our marriages. If this auction is scheduled to end during the weekend. We'll be in contact with you on Monday. If you have technical questions, or need shipping quote information about this or any of our other auctions, please try to ask them by Friday morning. Any technical or shipping questions received over the weekend most likely will not be answered before the close of the auction. Shipping Information: Bidders outside the Continental U.S. including bidders in Alaska. Hawaii, Puerto Rico& our friends in
Buy It Now
$9.50 Shipping Condition: Used Location: Rockwood, United States Nice Brown and Sharpe( 540) machinist toolmaker precision square in good condition. No case. Etching or engraving of original owner name(Morris" ... moreon the end of base on this square. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15 You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
Free Shipping Condition: Used Location: Elk Grove, United States See pics for condition.
Buy It Now
$5.95 Shipping Condition: Used Location: La Follette, United States This vintage Brown & Sharpe Model One dial test indicator with .001 grads is a reliable tool for any metalworking inspection and measurement needs. Made ... morein the USA, this dial indicator boasts a graduation style in inches and features a durable steel material. It is a great addition to any workshop, whether for personal or professional use. The item is in good working order, having been tested to ensure functionality. Used but still in great working condition we do Combine shipping I will put a tracking number on your order. Thanks
Buy It Now
Free Shipping Condition: New Location: Ogden, United States
1d 17h 51m 3s 0 bids
$40.00 Now
$6.00 Shipping Condition: Used Location: Pittsburgh, United States The Tool is in excellent condition for its age.
Buy It Now
$10.60 Shipping Condition: Used Location: East Falmouth, United States Nice Brown and Sharpe( 540) machinist toolmaker precision square in good condition. No case. Etching or engraving of original owner name(Morris" ... moreon the end of base on this square. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15 You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$5.25 Shipping Condition: Used Location: Bronx, United States The beam and blade are hardened, ground and lapped to ensure parallelism and straightness. The beam is grooved at the inner corner for clearance of burr ... moreor dirt. A picture is worth a thousand words.
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$6.99 Shipping Condition: New Location: Carrollton, United States 18” 4R SATIN CHROME TEMPERED COMBINATION SQUARE RULE. BROWN & SHARPE. USA MADE.
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$8.85 Shipping Condition: Used Location: Lindenhurst, United States Vintage Brown& Sharpe 6" Hardened Steel Precision Square No. 540 w/Wood Case Great condition Minor surface rust A little oil and polishing will ... morereturn this square to like new condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$10.95 Shipping Condition: Used Location: Clinton Township, United States The square looks very good for the age. Normal use, wear, and age shows such as spotting and stains as pictured.
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$23.83 Shipping Condition: Used Location: Dayton, United States We don't clean, repair or otherwise monkey around with anything, we push enough dust aside to note any flaws. Lot Number Shelf-1.
Buy It Now
$15.00 Shipping Condition: Used Location: La Grange, United States
Buy It Now
$40.00 Shipping Condition: Used Location: Washougal, United States This precision square level from Brown & Sharpe is a must-have for any metalworking professional. With its precise measurements and durable construction, ... morethis tool is perfect for ensuring accurate angles and alignments. Its design allows for easy handling and provides consistent results, making it an essential addition to any workshop. The square level is ideal for use in the metalworking industry, particularly in CNC manufacturing, and is an excellent choice for those in need of a reliable measuring tool. Its durable construction ensures it will last for years to come, making it an excellent investment for any metalworking professional.
Buy It Now
$6.95 Shipping Condition: Used Location: Berlin, United States VTG. BROWN& SHARPE NO. 540. 1 1/2" SQUARE lightly inscribe initials
Buy It Now
$8.95 Shipping Condition: New Location: Carrollton, United States For sale is a Brown and Sharpe Combo Level#4. Level shows signs of normal usage for its age but is still in very nice condition. It is missing one of ... morethe two bubble levels. Fine Print(Read it Please) I am not a dealer so ask any questions. Payment should be received within 3 days. No international bidding– so please don’t ask! PayPal only. No returns accepted. Item will be sent when payment has cleared. Shipped to verified address only. Thanks for looking and good luck!
Buy It Now
$10.75 Shipping Condition: Used Location: New Palestine, United States Brown & Sharpe 24” tempered Steel Blade for Combination Squares, blade is 1” wide x 24” Long. Has No. 4 Graduations are 1/8” - 1/16” - 1/32” - 1/64” .has ... moreowners mark. Very good condition. See Pictures. BB
Buy It Now
$6.09 Shipping Condition: Used Location: Marietta, United States Vintage Brown& Sharpe No. 542 Precision Bevel Edge square Machinist Tool. Description: Up for auction is a Vintage Brown& Sharpe No. 542 Precision ... moreBevel Edge square Machinist Tool. Condition. Its got wear from professional use. tarnish spots used with marks! a previous owners name ENGRAVED AS SHOWN.please see pictures) I am no expert grading the condition so I have taken pictures so you can see the condition and make your own judgments. Please contact me with any questions that you may have. Thank you for viewing my listing and Good Luck! PLEASE NOTE THE PICTURES FOR THE CONDITION OF THE ITEMS AND FOR THE CONTENT OF THIS AUCTION. Please review all photos. As they are part of my description. PAYMENT: PayPal SHIPPING: Item will be shipped to your Confirmed Street Address on the PayPal Payment. Please have your paypal account confirmed prior to payment. I ship items out within 1- 2 business days of receiving cleared payment! I pack all items carefully and securely with appropriate packaging protection. I SHIP TO UNITED STATES ONLY! ABOUT ME: I sell preowned Items from storage auctions. I do my best to describe and photograph them as best as I can. OTHER: All auctions are for used merchandise. Sold as is, unless otherwise noted.
Buy It Now
$8.70 Shipping Condition: Used Location: Altoona, United States Very nice shape
Buy It Now
$6.23 Shipping Condition: Used Location: Henniker, United States Vintage Brown& Sharpe 12" Rule Combination Square. Tempered, USA. Older Brown& Sharpe 12" Combination Square. Hardened steel. It comes ... morewith the scribe in the bottom of the handle. Bubble level in great condition. Well used but works well. Conditioned depicted in photos! Lot 8 Listing a lot of my Father-in-laws tools in the next day. Check out the other items, Thanks. Note: Sale is for Lower 48 States Only. United States) Please don’t bid if this don’t have an address in the US. Paypal Only. Payment within days is required!
Buy It Now
$20.74 Shipping Condition: New – Open box Location: South Hackensack, United States Solid Lathe (Dead) Center.
Buy It Now
Free Shipping Condition: New – Open box Location: South Hackensack, United States Solid Lathe (Dead) Half Center. High Speed Steel Tipped. Half Centers are relieved on one side to provide extra grinding wheel clearance.
Buy It Now
$12.45 Shipping Condition: Used Location: Geneva, United States Nice old square from Brown & Sharpe. Made in Providence, RI. Slide moves and tightens well.
Buy It Now
$24.45 Shipping Condition: Used Location: Browns Mills, United States Vintage Brown & Sharpe Combination Square Head,protractor,center head,24" rule & scribe works great
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$12.49 Shipping Condition: Used Location: Browns Mills, United States Vintage BROWN & SHARPE # 554 Toolmaker s Square, Straight & starrett 6" rule & Bevel Blade works great good condition
Buy It Now
$5.95 Shipping Condition: Used Location: Findlay, United States VINTAGE BROWN & SHARPE MFG CO. 30MM TEMPERED STEEL RULER MADE IN USA (TL950)
Buy It Now
$15.45 Shipping Condition: Used Location: Montpelier, United States VINTAGE Brown & Sharpe Combination Square, Center Hardened Tempered no 4 Tool. Adjusts and slides well it has some rust but it is in great shape. One ... moreedge has measurements which have eighth of an inch and bottom has 1 /16 inch the other 32 measurement and the other edge has 64 th
Buy It Now
$9.05 Shipping Condition: Used Location: Jonesville, United States You are bidding on a vintage Brown& Sharpe No. 542 Old Logo 4 1/2" steel square with beveled edges. Square is used and has few marks on it. Previous ... moreowners name lightly engraved( see pics) Box is original but has seen better days. What you see is what you will get in pictures. No shipping outside Continental U.S. without prior arrangements. Please pay within 48hrs of auction end. Thanks for looking!
Buy It Now
$7.55 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
$6.75 Shipping Condition: Used Location: New Palestine, United States Brown & Sharpe 5.5”Steel Precision Square. Made in USA Very good condition. See pictures X
Buy It Now
$10.60 Shipping Condition: Used Location: New Bedford, United States This is an early example of a Brown & Sharpe Combination Square Center Finder for a 12" or larger blade. (Not removed.). Not sure why it was made this ... moreway.
Buy It Now
$5.95 Shipping Condition: Used Location: Saunderstown, United States For your Consideration is this BROWN & SHARPE Machinist / Toolmaker Square. No. 540 (4-1/2"). Made in USA. This item is in Good used Working Condition.
Buy It Now
$8.60 Shipping Condition: Used Location: Elgin, United States BROWN & SHARPE COMBINATION SQUARE 12" MACHINIST WOODWORKING USA. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$6.90 Shipping Condition: Used Location: Rochester, United States
Buy It Now
$9.99 Shipping Condition: Used Location: Lombard, United States Brown & Sharpe 3" Beveled Square No. 542 USA. Used but in very good condition. Has etchings.
Buy It Now
$12.45 Shipping Condition: New Location: Chicago, United States Carpenter Try Square has a 8" stainless steel blade and features graduations etched on each side of the blade.
Buy It Now
$13.55 Shipping Condition: New Location: Fort Calhoun, United States Brown & Sharpe 12" 4 Pc Combination Square + scribe 599-438-1204 brand new in box
Buy It Now
$15.00 Shipping Condition: New Location: Canada New OLD STOCK Brown & Sharpe USA made Precision Machinists or Toolmakers Combination Square Center Head HARD ( this means the head is hardened steel instead ... moreof the lower grade cast iron heads) #599-9400-2009 for use with 12" and 24" Blades. The unit has old packing grease on the machined surfaces that is easily cleaned off . We did not remove it for the photos. Premium USA Quality and worth a fortune. Center head helps easily locate center location of round and square objects Attaches to combination square set blade (not included) to quickly indicate accurate center lines Knurled locking knob for easy by-hand adjustment Hardened steel provides strength and durability Manufactured in the USA Please See additional Pictures Below the Description. Please See additional Pictures Below the Description.
Buy It Now
$5.95 Shipping Condition: Used Location: Saunderstown, United States For your Consideration is this Brown & Sharpe. 3" Beveled Edge Square. This tool is in good used working condition. Made in USA.
Buy It Now
$8.60 Shipping Condition: New – Open box Location: Chicago, United States
Buy It Now
Free Shipping Condition: New Location: Minooka, United States TESA BROWN & SHARPE 599-438-1204-1. Steel Rule, Square Head (Hardened), Center Head (Not Hardened), Protractor (Reversible). GRAINGER APPROVED 2JGN1 Barrel ... moreBolt,5/8"L,316SS,#6-32,PK5. This 4-pc. combination square set is designed for layout, setup, checking heights and depths, and setting angles.
|
|
|
|
VINTAGE MACHINIST CALIPERS COMBINATION SQUARE BROWN & SHARPE STARRETT TOOLS
Hey Guys. You are bidding on all the vintage tools pictured. Just as i purchased them. They came in a lot of Machinist tools i purchased. Please e-mail me with any questions at all before bidding. No other parts on the squares. Just as you see it. Buying everything pictured as is as seen. All dividers and calipers are Starrett. Good luck and onece again e-mail me with any questions before bidding. Shipped next day as usual. Bid with confidence from this quality e-bayer. thank you.
|
|
|
Vintage Brown & Sharpe #4 Combination Square 2 of 24
You are Bidding on a Vintage Antique Brown& Sharpe Combination Square#4 12" blade Very Good Condition Please Look closely at the photos Made In USA See Pictures for other details Please read the descriptions carefully. If you have questions please ask as I do not take returns. Shipping Info: The cost of shipping is calculated by The United States Postal Service. I enter a weight and USPS calculates the cost by weight. Package size and the distance it has to travel. I do combine ship on multiple items purchased I ship USPS Priority. Please note: Once an item leaves my facility I have no control over how long it takes to be delivered to you. Note to overseas bidders: I do not decide the cost of shipping over seas the United State Postal Service Does. In some cases. Shipping items parcel post is not an option due to weight, Package ... moresize, or country of destination. So Please do not blame me for the high cost of over seas shipping. I can only communicate in english o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13d46748c07-0xf0-
|
|
|
Brown Sharpe 542 beveled 6" steel square tools tool machinist toolmaker
you get what you see except for the $1.either lightly used or unused.not engraved.no scriber marks on this.not damaged.in factory box.Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
Machinists (4) NICE NICE Brown & Sharpe Combination Square
This Is A Beauty Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small ... moretooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra items or similar scams! NOTE SHIPPING COST + COMPARE TO OTHERS-WHY GET BONED? COMBINE SHIPPING-ALL SHIPPING IS AT REAL COST-I DO NOT MAKE MONEY ON SHIPPING(AM I THE ONLY PERSON ON EBAY THAT DOESN'T? NO STUPID PRICE NO ABUSIVE SHIPPING COSTS! COMBINE SHIPPING! NOTE fair cheap non-profit shipping costs-how rare is that? BTW- USPS FLAT RATE BOXES ARE 11.00-WHY DO SO MANY SELLERS JACK UP THIS COST? THE TRACKING IS FREE! THE BOXES AND EVEN THE TAPE IS FREE! REAL COST NON ABUSIVE SHIPPING S
|
|
|
VINTAGE COMBINATION SQUARE - BROWN & SHARPE RULER - SQUARE STAMPED WITH AN "A"
This is a vintage COMBINATION SQUARE. The ruler is BROWN& SHARPE. The only mark stamped on the SQUARE is an"A" They are in good condition. This was acquired at a machinist's estate sale. I will be listing additional items. I accept Paypal. Payment must be received within 3 days of end of auction. Shipping is $6.50 first class mail. Please do not bid if you have negative or 0 feedback without contacting me first. Thanks for looking!
|
|
|
Brown & Sharpe 12" Square
Both levels work. Ready to use. 14 day money back guarantee less shipping.
|
|
|
Precision Steel Toolmaker Square Brown & sharpe 540 4.5 Inch
Precision Steel Toolmaker Square Brown& sharpe 540 4.5 Inch Please refer closely to all photos before purchasing. Used. Fair cosmetic condition. Precision steel toolmakers square by Brown& Sharpe. Model 540, 4.5" Long. Wooden case included. We are offering a 14 day NOT DOA guarantee(less shipping) on this listing. Thanks for looking- we appreciate your business! Please check out on eBay. Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description. The images show the ACTUAL or an ACCURATE REPRESENTATION of item that you are bidding on. All images are photographed by us and are the exclusive property of TELEVISIONARY Communications and/or The Reuseum. Use ... moreof any material in this advertising is prohibited without express permission. Unless otherwise stated above. This item is sold strictly"AS IS, with no warranty. We TRULY& HONESTLY try to represent our auction items to the best of our abilities. Please understand that we are sometimes unfamiliar with an item. That said. You might notice times that the description is very brief or nonexistent. To compensate for our lack of expertise we start prices very low, with the intent that you might be interested in the item for its parts and AS IS condition. Please take this in consideration when bidding on our auctions. We try to take weekends off in order to preserve our marriages. If this auction is scheduled to end during the weekend. We'll be in contact with you on Monday. If you have technical questions, or need shipping quote information about this or any of our other auctions, please try to ask them by Friday morning. Any technical or shipping questions received over the weekend most likely will not be answered before the close of the auction. Shipping Information: Bidders outside the Continental U.S. including bidders in Alaska. Hawaii, Puerto Rico& our friends in
|
|
|
BROWN & SHARPE 4 INCH BEVEL EDGE SQUARE WITH ORIGINAL WOOD BOX USED CONDITION
BROWN& SHARPE 4 INCH BEVEL EDGE SQUARE WITH ORIGINAL WOOD BOX USED CONDITION Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge BROWN& SHARPE 4 INCH SOLID BEVEL SQUARE IN ORIGINAL WOOD BOX. HAS NAME MARKED ON IT. HAS ETCHING ON THE TOOL. PLEASE SEE PICS UP CLOSE TO SEE CONDITION. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
BROWN AND SHARPE ANGLE FINDING LEVEL SQUARE RULER
BROWN AND SHARPE PROVIDENCE. R.I. U.S.A. TEMPERED NO.4 MACHINIST ANGLE FINDING LEVEL SQUARE 6" RULER. LEVEL WORKS. SHIPS TO U.S. ONLY AND WHEN PAYMENT IS IN PAYPAL. PLEASE LOOK AT MY OTHER MACHINEST TOOLS FOR SALE.
|
|
|
Brown & Sharpe 24-Inch Combination Square Set L@@K No Reserve Machinist Tool....
You are bidding on a 4 piece Brown& Sharpe 24-Inch Combination Square. This is in good condition but does have some personal markings on it. The scale reads 8ths and 16ths on one side and 32nds and 64ths on the other side. This is not a Mitutoyo or Starrett but a very good tool. Buyer is to pay $12.50 shipping and handling and I will combine items to save on shipping. Please look at the other items I have up for bid. Thank you.
|
|
|
LOT Hardinge & Brown & Sharpe No. 10 Collets SQUARE, HEX, ROUND
These are No. 10 collets all except 1 are Hardinge including a hardinge ES5C stop Round; 1) 9/32. 2) 5/16, 2) 3/8, 1) 7/16 Hex; 1) 1/4. 1) 5/16, 1) 7/16 Square; 1) 1/4
|
|
|
BROWN & SHARPE 540 MACHINIST SQUARE 7" VERY OLD VERY CLEAN CONDITION
BROWN& SHARPE 540 MACHINIST SQUARE 7" VERY OLD VERY GOOD CONDITION
|
|
|
Brown & Sharpe 542 6" Bevel Edge Square Good Condition!!!
OUR STORE ASK A QUESTION RETURN POLICY BOOKMARK US CHECK OUR FEEDBACK Brown& Sharpe 542 6" Bevel Edge Square Good Condition! Description 542 Brown Sharpe 6" Bevel Edge Square Slight wear on all sides Grease is present to prevent rust Includes wooden case Please see pictures for more details Please pay within 2 days. We will ship within 2 days. Thanks for looking! Regards, Get a Grip& More Posted with
|
|
|
Brown & Sharpe #542 4" Precision Square Beveled Edge With Wood Case
Brown& Sharpe#542 4" Precision Square Beveled Edge With Wood Case Box is old and has wear as can be seen in photos.
|
|
|
BROWN & SHARPE # 540 VINTAGE SQUARE MACHINIST TOOLMAKER INSPECTION 6"
Nice Brown and Sharpe( 540) machinist toolmaker precision square in good condition. No case. Etching or engraving of original owner name(Morris" on the end of base on this square. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $5.15 You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
|
|
|
VERTICAL SLIDE SQUARE BROWN & SHARPE 163-100 FOR AUTOMATIS & SCREW #8087
VERTICAL SLIDE SQURE TOOLHOLDER BROWN& SHARPE 163-100 TICS AND SCREW MACHINES WITH TOOL BIT THIS ITEM IS USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business ... moreday after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are
|
|
|
BROWN & SHARPE #20 BACK SQUARE TOOL HOLDER, FOR OG SCREW MACHINES
BROWN& SHARPE#20 BACK SQUARE TOOL HOLDER. FOR OG SCREW MACHINES. J101214 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
|
|
|
Precision Steel Toolmaker Square - Brown & Sharpe 540 6" USA w/ oak box
THIS IS A BROWNE& SHARPE PRECISION STEEL TOOLMAKERS SQUARE IT IS A 540 AND IS 6" AND COMES IN THE ORIGINAL WOODEN BOX PLEASE EMAIL ANY? THANKS FOR LOOKING!
|
|
|
BROWN&SHARPE # 542 MASTER SQUARE NEW LOGO CASE BEVELED EDGE MACHINIST TOOLMAKER!
You are bidding on a used VINTAGE AND NO LONGER MADE BROWN&SHARPE NO. 542 6" BEVELED EDGE MASTER SQUARE WITH CASE IN VERY GOOD USED CONDITION AS SHOWN. This item is typically used as a reliable 90° reference standard for SQUARENSS CHECKS IN PRECISION TOOLMAKING OR GRINDING OR OTHER MACHINING OPRERATIONS. Current list for a new starrett#20 of same 6" size and edge is $241.00 on page 1347 of the msc big book save some $$$ here! Brown&Sharpe no longer makes these squares but does sell their CHINESE line of squares. THIS SQUARE LOOKS TO BE IN VERY GOOD USED CONDITION. EVERYTHING WE CHECK WITH IT IS CORRECT TO OUR CURRENTLY CALIBRATED MASTER SQUARE BUT IT IS USED. THERE IS ENGRAVING ON BLADE AS SHOWN ON THIS VERY NICE HANDY EXPENSIVE INSPECTION SQUARE. CATALOG SAYS: The finest precision-checking squares~~~~ not graduated. ... moreSquareness accuracy to.0003" per 6" of length when new. 7-1/4" across top of blade and 6-1/8" under blade with a 4-3/4" beam on this beveled edge BROWN&SHARPE square no. 542. Blade measures 7-1/8" across the top of blade and 6-1/8" on bottom of blade. SQUARE IS A VERY NICE SIZE FOR MOST TOOL-ROOMS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your invoice before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. We are not liable for any lost and damaged packages when insured shipping is not paid for. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW. I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest lis
|
|
|
Brown & Sharpe 5 ½ inch No. 542 Beveled Edge Square
This Brown& Sharpe 5 ½ inch#542 precision bevel edge square has pitting on some surfaces. Although it is still very functional. The square measures 3 ¾ inches by 5 ½ inches in size. It is stamped“Brown& Sharpe Mfg Co. Providence, R.I. USA” and 542. There are no previous owner’s names or markings. See the photos for more details.
|
|
|
Brown and Sharpe 18" solid machinist square with wood sheath - good condition
Brown and Sharpe 18" machinist squ are with wood sheath Hardened 56-60 Rc Real good condition. Extreme accuracy. Not"shop grade" square. Hundreds of uses in a large die shop. Layout work, and inspection No edge dings Please enlarge all 12 images and inspect up close with the new Ebay image enhancer. We have checked this for squareness using the method shown in the video below Blade parallelism over length of 12" 0002 Stop to indicator. 180 degree reversal to indicator.001(out of square.0005 over 12" Returns accepted within 14 days if not as described or DOA Be sure to look over photographs closely Ask us anything International buyers are responsible for duty. Taxes, or any other charges added by their government. International buyers need to leave a contact phone number for UPS deliveries. PayPal payment is required ... moreimmediately We reserve the right to cancel any BUY NOW sale
|
|
|
Brown Sharpe #552 Die makers square
Model 552 Brown and Sharpe die makers square Machinist Toolmakers made in USA. some light surface rust otherwise great shape.
|
|
|
Precision Steel Toolmaker Square - Brown & Sharpe 3 Inch With Wooden Case
Precision Steel Toolmaker Square- Brown& Sharpe 3 Inch With Wooden Case Please refer closely to all photos before purchasing. Used. Fair cosmetic condition, light engraving, this does not effect operation. Precision steel toolmakers square by Brown& Sharpe. 3" Wooden case included. We are offering a 14 day NOT DOA guarantee(less shipping) on this listing. Thanks for looking- we appreciate your business! Please check out on eBay. Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description. The images show the ACTUAL or an ACCURATE REPRESENTATION of item that you are bidding on. All images are photographed by us and are the exclusive property of TELEVISIONARY ... moreCommunications and/or The Reuseum. Use of any material in this advertising is prohibited without express permission. Unless otherwise stated above. This item is sold strictly"AS IS, with no warranty. We TRULY& HONESTLY try to represent our auction items to the best of our abilities. Please understand that we are sometimes unfamiliar with an item. That said. You might notice times that the description is very brief or nonexistent. To compensate for our lack of expertise we start prices very low, with the intent that you might be interested in the item for its parts and AS IS condition. Please take this in consideration when bidding on our auctions. We try to take weekends off in order to preserve our marriages. If this auction is scheduled to end during the weekend. We'll be in contact with you on Monday. If you have technical questions, or need shipping quote information about this or any of our other auctions, please try to ask them by Friday morning. Any technical or shipping questions received over the weekend most likely will not be answered before the close of the auction. Shipping Information: Bidders outside the Continental U.S. including bidders in Alask
|
|
|
Brown & Sharpe 559 Toolmaker Square
Model 559 Brown& Sharpe Toolmaker Square excellent condition in original wooden box. Photos show grease. Not rust. Posted with
|
|
|
BROWN&SHARPE # 540 VINTAGE MASTER SQUARE MACHINIST TOOLMAKER INSPECTION LAY-OUT
You are bidding on a used VINTAGE NO LONGER MADE BROWN&SHARPE NO. 540 6" STRAIGHT EDGE MASTER SQUARE IN VERY GOOD USED CONDITION AS SHOWN AND WAS IN CURRENT CALIBRATION BY FORMER OWNER'S COMPANY WHEN PURCHASED BY US. This item is typically used as a reliable 90° reference standard for SQUARENSS CHECKS IN PRECISION TOOLMAKING OR GRINDING OR OTHER MACHINING OPRERATIONS. Current list for a new starrett#20 of same 6" size and edge is $241.00 on page 1347 of the msc big book save some $$$ here! Brown&Sharpe no longer makes these squares but does sell their CHINESE line of squares. THIS SQUARE LOOKS TO BE IN VERY GOOD USED CONDITION. EVERYTHING WE CHECK WITH IT IS CORRECT TO OUR CURRENTLY CALIBRATED MASTER SQUARE BUT IT IS USED. THERE IS NO ENGRAVING AS SHOWN ON THIS VERY NICE HANDY EXPENSIVE INSPECTION SQUARE. ... moreCATALOG SAYS: The finest precision-checking squares~~~~ not graduated. Squareness accuracy to.0003" per 6" of length when new. These hardened steel squares are used when extreme accuracy is required. The beams and blades are hardened. Ground, and lapped to insure parallelism and straightness. The beam is grooved at the inner corner for clearance of burr or dirt. Made of high quality tool steel, with the finest of craftsmanship throughout. SEE PICS. 6" blade and a 4-3/8" beam on this square no. 540. Blade measures 7-1/8" across the top of blade and 6-1/16" on bottom of blade. SQUARE IS A VERY NICE SIZE FOR MOST TOOL-ROOMS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your invoice before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. We are not liable for any lost and damaged packages
|
|
|
Brown & Sharpe (B.S.) .700" Square Gage Block
Brown& Sharpe(B.S. 700" Square Gage Block A Brown& Sharpe(B.S. 700" Square Gage Block. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used Return Policy: We are offering the buyer a ONE WEEK right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 8 ozs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS First Class Package California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay ... morevia. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item, we are willing to try and re-ship; this will require you to pay the applicable shipping co
|
|
|
BROWN & SHARPE SOLID STEEL SQUARE 6" INCH
FROM A CLOSED MACHINE SHOP.GOOD CONDITION LIGHT OWNER ENGRAVINGS ON TOOL. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
Brown Sharpe # 540 steel square square USA 6" machinist toolmaker
you get what you see except for the $1.used.clean.not engraved or damaged.in a great case.7 1/8 from the back of the handle to the end of the blade. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
Vintage Brown & Sharpe Mini 6 inch Machinist Square Adjustable w/ bubble level
Vintage small Brown& Sharpe Rule Mini 6 inch Machinist Square th at is all steel a nd very old school look about it. It has a nice com pact feel to it and is fu ll y adjust able and the s mall level works and complete. Made by Brown& Sharpe M fg Co. of Prov idence. RI. Comes in divisions of 64th. 32nd 16th and 8th of an inch.
|
|
|
Machinists 4/28 (11) WOW Mint Brown & Sharpe 4" Adjustable Square
MINT PERFECT Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS ... moreOF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra item
|
|
|
BROWN & SHARPE NO.541 36" MASTER PRECISION STEEL SQUARE
Inventory Number: 04131790128 Manufacturer: Description: BROWN& SHARPE NO.541 36" MASTER PRECISION STEEL SQUARE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical in appe
|
|
|
Starrett ?,union?,craftsman,sawyer ?,brown & sharpe ?,combination square head
No Name on combo square head bubble works.Screw cap on end scribe-nice specks of rust on knob lil bit of stains on polished edges 4.5 long paint 90+%
|
|
|
Lot of 15 Hardinge & Brown & Sharpe No. 10 Collets Square, Hex, Round
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Lot of 15 Hardinge& Brown& Sharpe No. 10 Collets Square. Hex and Round different sizes Used. Good condition. some may have a little wear All sales final! Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
VINTAGE BROWN & SHARPE COMBINATION SQUARE LEVEL
An old Brown& Sharpe level that is part of a combination square I believe. It is 7” long and 3” high. The screw that would have held the square is missing. In used condition but has no rust. The level is good. All items sold as is. Please email me with any questions prior to bidding. Payment must be received 10 days after close of auction or sale will be voided. Buyer to pay $5 for USPS First Class mailing with delivery confirmation.
|
|
|
18" brown and sharpe machinist square with sheathe - clean
18" brown and sharpe machinist square with sheathe- clean- Returns accepted within 14 days if not as described or DOA Be sure to look over photographs closely Ask us anything International buyers are responsible for duty. Taxes, or any other charges added by their government. International buyers need to leave a contact phone number for UPS deliveries. PayPal payment is required immediately We reserve the right to cancel any BUY NOW sale 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e66879758-0xfa-
|
|
|
24" BROWN AND SHARPE MACHINIST SQUARE WITH WOODEN SHEATHE
24" BROWN AND SHARPE MACHINIST SQUARE WITH WOODEN SHEATHE- Returns accepted within 14 days if not as described or DOA Be sure to look over photographs closely Ask us anything International buyers are responsible for duty. Taxes, or any other charges added by their government. International buyers need to leave a contact phone number for UPS deliveries. PayPal payment is required immediately We reserve the right to cancel any BUY NOW sale
|
|
|
BROWN & SHARPE #540 PRECISION MACHINISTS SQUARE 18 INCH
SETUP AND ALIGN PARTS AND TOOLING FOR INSPECTION AND MACHINING LAYOUT. PLEASE SEE OUR OTHER QUALITY PRODUCT LISTINGS.
|
|
|
Brown & Sharpe 5.5" Bevel Edge Square
Brown& Sharpe 542 5.5" Bevel Edge Square In Wooden Case Good Condition Posted with
|
|
|
Brown & Sharpe 12" Combination Square with Protractor, 3 pcs. Machinist Tool, NR
FOUND IN AN OLD ESTATE TOOL BOX. ONLY HAVE WHAT YOU SEE. THE HEAD WORKS FINE. NOTE THE RUST SPOTS ON THE RULER& ALL NEEDS A GOOD CLEANUP. NO RESERVE
|
|
|
BROWN & SHARPE #4 RULE & HARDEN COMBINATION SQUARE MACHINIST TOOLS *D
BROWN& SHARPE#4 RULE& HARDEN COMBINATION SQUARE MACHINIST TOOLS*D Condition/I n fo: The rule is marked B&S and the handle is marked"hardened" I am not sure who make the handle. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be ... morehappy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
Hardinge Feed Finger 22H 3/4" Square Brown Sharpe
USED. GOOD 22H 3/4" SQUARE FEED FINGER. BUYER PAYS $4.80 FOR USPS PRIORITY MAIL USA SHIPPING FROM 30527 2008-25 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ... moreITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject to local sale while listed. If you need further produ
|
|
|
BROWN & SHARPE MACHINIST SQUARE 2-5/8" x 4-1/2" JEWELERS TOOL VINTAGE USA
BROWN& SHARPE MACHINIST SQUARE JEWELERS TOOL VINTAGE STEEL SQUARE MARKED: B. S. Mfg. Co" Prov. R. I. U.S.A. PLEASE MOUSE OVER IMAGES PROVIDED TO VIEW DETAILS ABOUT OUR ANTIQUES& COLLECTIBLES ITEMS ARE PREVIOUSLY OWNED. MOST ARE WITHOUT KNOWN HISTORY UNLESS SPECIFICALLY STATED OTHERWISE. ANY QUESTIONS? AFTER OUR BASIC RESEARCH AN HONEST ATTEMPT WAS MADE TO PRESENT THIS ITEM AS SEEN AND BELIEVED. PLEASE FEEL FREE TO ASK ANY QUESTIONS BEFORE BUYING AND/OR BIDDING. CLICK ON"ASK A QUESTION" AT THE VERY BOTTOM OF THIS PAGE. CONTACT US THROUGH EBAY MESSAGES OUR TERMS OF SALE PAYMENT: PAYPAL PAYMENT IS DUE WITHIN 3 DAYS. SHIPPING: WE WILL INSURE THIS PACKAGE AND SHIP BY USPS. WE OFFER COMBINED SHIPPING DISCOUNTS IF IT SAVES YOU MONEY& DOESNT DELAY HANDLING TIME. GUARANTEE: THIS ITEM IS GUARANTEED TO BE AS DESCRIBED. PLEASE ... moreCONTACT US(WITHIN 3 DAYS) FOR REFUND AND/OR RETURN INSTRUCTIONS. IF YOU FEEL THIS ITEM IS NOT AS DESCRIBED. RETURNS: AUTHORIZED RETURNS ONLY. MUST BE MADE WITHIN 14 DAYS. On Apr-19-13 at 05:58:50 PDT. Seller added the following information:
|
|
|
Brown and Sharpe 14" solid machinist square with wood sheath - good condition
Up for sale is a Wonderful Machinist square Brown and Sharpe with it's original Wooden Sheath. The square measures approx. 14 inches long and looks like it was well used. The square reads Brown and Sharpe Mfg. Co. Providence RI USA#540. The wood sheath measures15 1/2 inches long and approx. 8 1/2 inches wide. There is a name on the sheath. It reads"Brown and Sharpe Mfg. Co. Providence RI USA. There is a piece broke off the sheath but it looks like an old break. Great patina.
|
|
|
BROWN & SHARPE COMBINATION SQUARE WITH CENTER HEAD-PROTRACTOR-12" & 18" RULES
BROWN& SHARPE COMBINATION SQUARE WITH SQUARE HEAD. CENTER HEAD-PROTRACTOR HEAD AND 12" 18" RULES: This item is a nice Brown and Sharpe Combination Square Set which includes the square head. Protractor head, center head, 12 inch rule and an 18 inch rule. It is the hardened model. The blades both say Tempered No. 4. It is in good condition. There is the name BUD neatly etched in small letters on the edge of the center head and square head and face of the 12 inch rule. The 18 inch rule has Bud Johnson lightly etched on it. The square head has the scriber in the handle. SALES WITH HEAVY OR MULTIPLE ITEMS PLEASE WAIT UNTIL WE CONTACT YOU WITH EXACT SHIPPING CHARGES. I WILL BE GLAD TO COMBINE SHIPPING. WHICH MAY MAKE THE TOTAL LOWER. LARGE OR HEAVY ITEMS OR ONES THAT ARE SHIPPED FARTHER MAY MAKE SHIPPING HIGHER. NEW HIGHER U.S.P.S. ... morePOSTAL RATES FORCE AN INCREASE IN POSTAGE FEES. I AM SORRY. I HAVE BEEN LOSING MONEY ON EVERY ITEM LATELY BECAUSE OF SHIPPING CHARGES. INSURANCE IS INCLUDED IN SHIPPING. UNLESS YOU STATE THAT YOU DO NOT WANT IT, AND AGREE TO ACCEPT THE RISK. In the next few weeks I will be selling precision toolmaker's tools that belonged to a good friend who started in the trade in the 60s and was a top notch toolmaker/modelmaker for many years. He made many of the tools and some were bought when American made precision tools were readily available. A few are not American made. Since I am a retired toolmaker/modelmaker I will try to describe the items that I am familiar with. If I am not familiar with an item I will try to research it and give the best description I can. I will be glad to combine shipping on multiple items. If you would like additional photos or information please email me. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Brown and Sharpe 12 inch square protractor and centering head
Offered is a nice used Brown and Sharpe 12 inch square with centering head and protractor. Item comes as shown.
|
|
|
BROWN&SHARPE 542 4 1/2" MASTER SQUARE VINTAGE OLD LOGO TOOLMAKER MACHINIST
You are bidding on a vintage Brown& Sharpe No. 542 Old Logo 4 1/2" steel square with beveled edges. Square is used and has few marks on it. Previous owners name lightly engraved( see pics) Box is original but has seen better days. What you see is what you will get in pictures. No shipping outside Continental U.S. without prior arrangements. Please pay within 48hrs of auction end. Thanks for looking!
|
|
|
Combination Square, Vintage Brown & Sharpe (# 4) 12" Square, Machinist USA Tool
For your Consideration is this Vintage Combination Square. Brown& Sharpe. Providence, R.I. U.S.A. Ni ce vintage Patina(as pictured) T his tool is in good used working condition and will be a nice addition to your collection. Please see pictures and email with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB5-4729-4 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people ... moreresulting from the use, abuse or misuse of this item. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e9434de9d-0xfa-
|
|
|
Brown & Sharpe Machinist Square Model #540 Hardened Steel 4"
THE ITEM PICTURED IS WHAT YOU ARE BIDDING ON-SOLD AS IS-PLEASE ASK QUESTIONS LS Starrett Last Word Universal Test Indicator in the original case! THIS ITEM IS IN GOOD OLD USED CONDITION. NO DAMAGE-PLEASE REFER TO THE PHOTOS& ASK QUESTIONS BEFORE BIDDING& YOU WON'T BE DISAPPOINTED INTERNATIONAL BUYERS PAY ACTUAL SHIPPING COSTS SHIPPING INCLUDES PACKING. SHIPPING& INSURANCE ON ITEMS OVER $25 OUR GOAL IS TO PROVIDE YOU WITH A POSITIVE 5 STAR BUYING EXPERIENCE ON EBAY! 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13e9bb303ad-0xff-
|
|
|
BROWN&SHARPE # 542 3" MASTER SQUARE VINTAGE OLD LOGO TOOLMAKER MACHINIST LEATHER
You are bidding on a used BROWN&SHARPE NO. 542 4" X 3-1/8" INSIDE. BEVEL EDGE MASTER SQUARE IN VERY GOOD CONDITION AS SHOWN. GENTLY USED AS SHOWN. STORED IN A CUSTOM MADE LEATHER CASE FOR IT! MAYBE SOME LIGHT STAINS ON BLADE. This item is typically used as a reliable 90° reference standard for SQUARENSS CHECKS IN PRECISION TOOLMAKING OR GRINDING OR OTHER MACHINING OPRERATIONS. Current list for a new starrett# 55 of same 3" size and beveled edge is $210.00 on page 1347 of the msc big book save some $$$ here! Brown&Sharpe no longer makes these squares but does sell their CHINESE line of squares. THIS SQUARE LOOKS TO BE IN VERY GOOD USED CONDITION. EVERYTHING WE CHECK WITH IT IS CORRECT TO OUR CURRENTLY CALIBRATED MASTER SQUARE BUT IT IS USED. THERE IS NO ENGRAVING AS SHOWN ON THIS VERY NICE HANDY EXPENSIVE ... moreINSPECTION SQUARE. CATALOG SAYS: The finest precision-checking squares~~~~ not graduated. Squareness accuracy to.0003" per 6" of length when new. These hardened steel squares are used when extreme accuracy is required. The beams and blades are hardened. Ground, and lapped to insure parallelism and straightness. The beam is grooved at the inner corner for clearance of burr or dirt. Made of high quality tool steel, with the finest of craftsmanship throughout. SEE PICS. 4" blade and a 2-1/2" beam on this square no. 542. Blade measures 3-7/8" across the top of blade and 3-1/8" on bottom of blade. SQUARE IS A VERY NICE SIZE FOR MOST TOOL-ROOMS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your invoice before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. We are not liable for any lost and
|
|
|
BROWN&SHARPE VINTAGE #552 DIE-MAKERS SQUARE TOOLMAKER MACHINIST INSPECTION QA!!!
You are bidding on a used VINTAGE BROWN&SHARPE NO. 552 DIE-MAKERS SQUARE IN VERY GOOD CONDITION AS SHOWN. COMES WITH ORIGINAL BOX AND BOTH NARROW GRADUATED AND NARROW OFFSET BLADE AS SHOWN! Current list for a new starrett#457C of same size and beveled edge is $248.00 save some $$$ here! Brown&Sharpe no longer makes these squares but does sell their CHINESE line of squares. THIS SQUARE LOOKS TO BE IN VERY GOOD USED CONDITION BUT IT IS USED. THERE IS NO ENGRAVING BUT MINOR MARKS AS SHOWN ON THIS VERY NICE HANDY EXPENSIVE INSPECTION SQUARE. SQUARE IS A VERY NICE SIZE FOR MOST TOOL-ROOMS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! ... moreTHANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your invoice before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. We are not liable for any lost and damaged packages when insured shipping is not paid for. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW. I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are re
|
|
|
B&S solid steel 4" square Brown & Sharpe machinist mechanic tool accurate USA
B&S solid steel 4" square Brown& Sharpe machinist mechanic tool accurate USA Here is a 4” solid steel square. Made by Brown& Sharpe Co. Providence, RI, USA. This tool is a piece of Americana, made probably about 1938. For its age it is in good shape: a few tiny nicks but there is no indication that it is out of square. The beam is 2 3/8” long. This is a useful tool that will help in set-up and inspection without being cumbersome to handle. Please view all photos as they are part of the description. Feel free to ask questions. Thank you. If you have any questions regarding payment please e-mail us through ebay. Payment must be received within 3 days after auction closes. We will not ship until funds are cleared. All payment's are fully secure. CLICK HERE TO VISIT MY STORE U.S. BUYERS All shipments will be shipped UPS or ... moreUSPS. INTERNATIONAL BUYERS Orders taken outside the UNITED STATES may be subject to port duties and/or taxes. Once a shipment is received these additional charges for custom clearance will be your responsibility. We cannot predict them. We will ship USPS or UPS. CLICK HERE TO VISIT MY STORE All of our treasures are thoroughly researched to best describe with accuracy and detail. Please do not bid if you do not agree to the shipping and handling price. There is no negotiating as we take great care in our shipping. CLICK HERE TO VISIT MY STORE We have bought and sold antiques our whole lives. As antique dealers. We strive to find valuable treasures for all to enjoy. Our merchandise is clean and fresh unless otherwise stated. All sales are final unless damaged. Please ask all questions before bidding. We answer our emails daily and will definitely get back to you. I'm PayPal Verified CLICK HERE TO VISIT MY STORE Items will be shipped as described. Please ask all questions before bidding. If upon receipt item is damaged. We will send you the necessary paperwork to file a claim if insurance was purchased to receive your money back. CLICK HERE TO VISIT MY STORE
|
|
|
BROWN & SHARPE # 552 Die Maker's Square - Machinist's tool - Free Ship!
BROWN& SHARPE# 552 Die Maker's Square- Machinist's tool- Free Ship! Mouse over images to see larger version Click to view supersize image This handy. Versatile tool is in really good shape and ready to be put to work. Please refer to the photos. They are an important part of the description. I have tried to include many views so you can get an accurate understanding of the age and condition of this item. I have no room left to collect more"things" so. I am left with no choice but to significantly reduce the volume of tools. Antiques and collectibles that have added up over the past 30 years. Please email if you have questions or require additional photos. T hanks for looking and good luck! My Guarantees to You: Guaranteed Prompt Shipping: Your item will normally be shipped within 1 business day of your payment. I will ... moreemail you if. For any reason, there is a delay. Guaranteed Authentic: Your item will be delivered to you as it has been shown and described in this listing. I personally photograph ad describe all of my items so what you see is what you get. Guaranteed Quality Packaging: I make every effort to carefully package your item in a way that ensures that you'll receive it in the same condition as described. Guaranteed Delivery: Your item will normally be shipped to you using traceable delivery methods. All US shipments are through the US Postal Service by USPS First Class or Priority Mail. European shipments are through the Dutch or German post. Sometimes purchases will be insured for you at my expense and subsequently will require a signature upon delivery. Have Questions? Feel free to e-mail me any questions you may have. Please allow up to 12 hours for a reply due to my work schedule. Thanks for your interest in DDWH Antique Tools& More*
|
|
|
Vintage 12" Brown and Sharpe Machinist Combination Square Tempered # 4
Old Square is in good condition.Free Shipping in U.S.A.
|
|
|
Vintage Brown & Sharpe #540 Machinist Toolmaker 6" Inspection Square w. Wd. Case
This is a n good working/ operating condition. Brown and Sharpe# 540 Vintage Machinist Toolmaker 6" Inspection Square. This Inspetion"square" was last calibrated in 2002 as noted on the blade.The Blade is 9- 1/4" on inside,10-5/8" outside with a 5-1/2" Beam and comes with a wooden case.This square was made in the USA. See scans. Thanks for your interest. Shipping is $10.00 US Priority Mail w. tracking. International bidders shipping is determined by location. On May-09-13 at 22:07:43 PDT. Seller added the following information:
|
|
|
Vintage SMALL BROWN & SHARPE Mfg Co #554 ADJUSTABLE MACHINIST'S SQUARE 2-1/2"
A VERY GOOD SMALL BROWN& SHARPE No. 554 ADJUSTABLE 2-1/2" SQUARE. 32nds AND 64ths. FULLY FUNCTIONAL.
|
|
|
BROWN & SHARPE PUNCH AND DIE SQUARE PUNCH 2" SQ X 2-15/16 OD X 7/8 X 2-1/4 #9253
Description: BROWN& SHARPE PUNCH AND DIE SQUARE PUNCH: 2" SQ. X 2-15/16" OD X 7/8" OD X 2-1/4" THICK DIE: 2.016 SQ. X 4-15/16 X 3/4" THICK SED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. ... moreReturns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sa
|
|
|
HUGE 39" # 541 BROWN & SHARPE PRECISION MACHINIST SQUARE WITH CASE TK 73
Matchlessantiques is offering smiths and collectors this Huge# 541 Precision Machinist Brown& Sharpe Square. The square come with a wooden case. It is marked"BROWN& SHARPE MFG CO. PROVIDENCE R.I. U.S.A. 541" and"TEXTILE MACHINE WORKS" Some of the markings are worn off. Please take a close look at the pictures. NOTE: This auction is for the Brown& Sharpe Machinist Square and Case ONLY. The stakeplate it is displayed on and tools displayed in the background are NOT INCLUDED in this auction. Measurements are: length 39" Width 20" case 42" x 22" x 4" and actual weight 24 lb. Box actual weight 8 lb. Total actual weight 32 lb. The item in this auction comes from the Tim Kris Collection of Blacksmith Anvils. Tools, and Equipment that was housed and displayed at The Anvil Museum in Brasstown, ... moreNC. To learn more about the collection, visit the museum website at www.anvilmuseum.com. Michigan Residents Only: 6% MI Sales Tax will be calculated on the Total Price(Final Value Price and Shipping charges) Don't forget to buy a good supply of POCAHONTAS Blacksmith Coal! Only $17.50 per 50-lb. bag! Click Here Money-back Guarantee: You have 14 days from the date you receive your item to contact us and ship back the item you have purchased. We will refund your full purchase price after we receive the returned item. Original shipping cost will not be refunded. Buyer pays for the return shipping fees. Trade-in Policy: We offer all our buyers the option to trade in a previously purchased item for credit towards a new auction purchase. The price of the new item should be higher than the price of the item being traded in. The remaining balance after credit has been applied can be paid for via PayPal. Or the buyer can email us to make other arrangements. We must receive the item to be traded in before we can issue an account credit, and ship the new item won. Buyer is responsible for all shipping costs related to the trade in and new purchase. Normal wear on the item to be traded
|
|
|
Antique VTG Brown & Sharpe Combination Square No. 4 Ruler w/ Level Hardened USA
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Antique VTG Brown& Sharpe Combination Square No. 4 Ruler w/ Level Hardened USA Presented for your consideration we are offering this vintage Brown& Sharpe hardened combination square with 12” graduated No. 4 ruler and level. Made in Providence, Rhode Island. USA. In good vintage condition. As It moves beautifully up and down ruler. With some discoloration and a spot of surface oxidation on ruler between 10 and 11" and knobs Should clean up nicely with a good cleaning- we NEVER clean out antique or vintage tools Graduations. Brown& Sharpe, No. 4, and other writings are readable– a cleaning would bring out the luster and discoloration some more, should you desire Please look at all photos as they are an integral part of description This is a welcome addition to ... moreany vintage tool or machinist collection. And we are thrilled to offer it to market for your pleasure. WE GO TO GREAT LENGTHS TO BRING A VAST ARRAY OF THE FINEST AND UNIQUE COLLECTIBLES TO MARKET FOR YOUR ENJOYMENT AND PLEASURE. PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS. IF YOU NEED ANY ADDITIONAL PICTURES. PLEASE LET US KNOW. PLEASE VISIT OUR STORE formula1monacocollectibles TO SEE OUR MAGNIFICENT INVENTORY http:stores.ebay.com/formula1monaco-collectibles WHENEVER WE SELL HIGH-END ELECTRONICS OR FRAGILE COLLECTIBLES. WE TAKE GREAT CARE IN THEIR PACKAGING, AND INSURE THEM FOR THEIR VALUE, SO IF THE ITEM YOU ARE BIDDING ON FALLS INTO THIS CATEGORY, THAT IS THE REASON FOR THE MODEST HANDLING FEE. WE ARE CONFIDENT THAT IS HOW YOU WOULD PREFER IT. 100% FEEDBACK IS OUR GOAL. PLEASE. IF YOU CANNOT LEAVE US(5) STARS ON ALL FEEDBACK RATINGS, INCLUDING: ITEM AS DESCRIBED· COMMUNICATION· SHIPPING TIME· SHIPPING AND HANDLING CHARGES PLEASE CONTACT US SO WE MAY HAVE THE OPPORTUNITY TO RESOLVE ANY ISSUES. PROBLEMS, OR DISCREPANCIES. IF YOU HAVE ANY QUESTIONS. PLEASE DON’T HESITATE TO CALL US AT(267) 241-7074. PLEASE CHECK OUT OUR OTHER ITEMS IN OUR EBAY STORE AS WELL. W
|
|
|
Vintage 12" BROWN & SHARPE #4 Combo Square w/Protractor and Center Finder
For sale is a Brown and Sharpe Combo Level#4. Level shows signs of normal usage for its age but is still in very nice condition. It is missing one of the two bubble levels. Fine Print(Read it Please) I am not a dealer so ask any questions. Payment should be received within 3 days. No international bidding– so please don’t ask! PayPal only. No returns accepted. Item will be sent when payment has cleared. Shipped to verified address only. Thanks for looking and good luck!
|
|
|
brown and sharpe diemakers square
Brown and shape die makers square in the box it is used but looks to be in very good condition i really don't know much about these tools but if you have questions i will be happy to help you thanks for looking
|
|
|
LARGE BROWN & SHARPE SOLID SQUARE 27" W/WOOD CASE B & S
LARGE BROWN& SHARPE SOLID SQUARE 27" W/WOOD CASE B& S, BROWN& SHARPE SOLID SQUARE 27" BLADE 13-3/4" BEAM. GOOD CONDITION AS SHOWN WITH WOOD CASE. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
BROWN SHARPE NO 160-322 TOOL POST FOR SQUARE TOOLS 2, 2G AUTOMATIC & 3 MACHINES
GOOD USED CONDITION FROM A CLOSED SHOP GOOD WORKING ORDER.These tool posts have a rigid wedge support. Are compact and easily adjusted. They are furnished either for use on the front cross slied. A raising block is included with each tool so theat it can be used with the spindle running in either direciton. Also incuded is Part no 241-122 Left-hand Guide used when the forming tool in the front tool post is set to cut with the spindle running backward.Additional info available at brown sharpe.com. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
7 BROWN & SHARPE #22 STUB COLLETS HEX SQUARE & ROUND RARE L@@K
BROWN& SHARPE#22 FLEX COLLETS 7 PIECES IN ALL HEX SHAPE 5/8& 7/8. SQUARE 13/16, 1/4, 7/8 ROUND 1-1/8& 1-1/4 ALL IN GOOD TO NEW COND. MOST IN BOXES. THANKS FOR LOOKING.
|
|
|
MACHINIST TOOL LATHE MILL CLEAN Brown & Sharpe Protractor Square in Wood Caser
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL On May-08-13 at 17:06:41 PDT. Seller added the following information: THE BASE IS INCLUDED IN THE AUCTION. PLEASE DISREGARD THAT THE BASE IS NOT INCLUDED*
|
|
|
2-Clean BROWN & SHARPE 162-100 Universal Tool Post for Square Tools 711-162-100
Fresh from a closed plant. Being used. Ready to Go. Brown& Sharpe 162-100 part# 711-162-100 These tool posts have a rigid wedge support. Are compact and easily adjusted. They are furnished either for use on the front cross slied. A raising block is included with each tool so theat it can be used with the spindle running in either direciton. They are furnished with one hardened blade. Tool Support. Backing Block, 1) Riser, Hold Down Hardware included. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are ... morebidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
BROWN & SHARPE NO.540 18" MASTER PRECISION STEEL SQUARE
BROWNE& SHARPE 18 INCH SQUARE W/ WOOD SHEATH PLEASE SEE PICS. ASK ANY? VERY GOOD CONDITION I DO NOT SHIP TO PR. HI, OR ALASKA SORRY THANKS FOR LOOKING
|
|
|
brown and sharpe 6" square in wooden case machinist tools
Up for auction is a large 6" square by brown and sharpe. The tool is much wider than most standard squares. Nearly an inch and half wide. Immaculate condition for the tool and case. Posted with
|
|
|
Vintage BROWN & SHARPE Mfg Co #555 ADJUSTABLE MACHINIST'S SQUARE 4"
Vintage BROWN& SHARPE Mfg Co#555 ADJUSTABLE MACHINIST'S 4" SQUARE Made in USA: PLEASE LOOK AT THE PICTURES FOR MORE DETAILS( FEEL FREE TO CONTACT ME IF YOU HAVE ANY QUESTIONS IF YOU BUY MORE THAN ONE ITEM ON MY AUCTION PLEASE WAIT FOR COMBINED INVOICE Once your item has arrived. Please post positive feedback and I will know your item has arrived safely Once receiving feedback. I will post a positive for you also. I await these feedbacks so I know this transaction is complete and you are a satisfied buyer IF YOU ARE NOT SATISFIED. PLEASE EMAIL ME FIRST BEFORE LEAVING FEEDBACK! I always try and work with everyone to make sure you have a pleasant experience with my auctions THANK YOU
|
|
|
BROWN SHARPE Square 26 X 13 20" No 20
HI UP FOR SALE THIS BROWN SHARPE Square 26 X 13 20" No 20 STARRETT 3 THE STARRETT CO AT HOLMASS MADE USA THIS ITEM WAS TESTED AND IS IN GOOD WORKING CONDITION.IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Check out my! Be sure to add me to your!
|
|
|
Vintage Machinists Tools, Lathe Mill - Brown & Sharpe # 559 Tool Maker's Square
Lathe Mill- Brown& Sharpe# 559 Tool Maker's Square. Please see the pictures as they are part of the description. We are not experts in this area and are doing our best to describe the items so any additional knowledge will be appreciated. Owned By Jerry G. Lackey. Nuclear Engineer. Scientist and Inventor during his career at EG&G. One of the Inventors of two patents held by EG&G. Team member of NEST(Nuclear Emergency Support Team) Responded to Three Mile Island Accident in 1979. This Estate Sale is made directly by the Family.
|
|
|
Brown & Sharpe #4 Rule Protractor Head / Level with ruler for Combination Square
UP FOR AUCTION IS A BROWN& SHARPE TEMPERED#4 PROTRACTOR HEAD/LEVEL WITH 12" RULER. NICE VINTAGE PIECE. ALL MOVEMENTS SMOOTH. PLEASE E-MAIL ME WITH ANY QUESTIONS. THANK YOU& HAPPY BIDDING!
|
|
|
Brown & Sharpe Machinist Square Model 540 Hardened Steel 4 1/2"
Brown& Sharpe 4 1/2" square. In good condition, The blade on the tip is knocked off or removed, see photos, but doesn't effect to the tool
|
|
|
BROWN & SHARPE COMBINATION SQUARE W/ STARRETT CENTER HEAD PROTRACTOR
HERE IS A NICE BROWN& SHARPE SQUARE WITH A STARRETT CENTER HEAD AND STARRETT PROTRACTOR NO 490
|
|
|
BROWN & SHARPE COMBINATION SET SQUARE PROTRACTOR CENTER GAGE MACHINIST TOOLS *8
BROWN& SHARPE COMBINATION SET SQUARE PROTRACTOR CENTER GAGE MACHINIST TOOLS Condition/I n fo: No engraving. There is a couple of paint spots on one side of the square. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Click here to get notifications of future auctions favorites ... morelist! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
MACHINIST TOOLS LATHE MILL **BROWN & SHARPE STEEL SQUARE W/ BEVELED EDGES #542
UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS· BROWN& SHARPE- STEEL SQUARE with BEVELED EDGES· 4 ½” 542· IN ORIGINAL PACKIAGING& BOX– NICE CONDITION· Made in the USA- PROVIDENCE. RI* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Very well maintained and cared for by a seasoned professional machinist. PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY ... moreOTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer.
|
|
|
Brown And Sharpe No. 540 5 1/2" Solid Square
lite engraving pictured. 5-1/2 x3-13/16, nice over all condition
|
|
|
11C COLLET BROWN & SHARPE SQUARE FOR AUTOMATICS AND SCREW MACHINES #5646
SOUTHEASTERN TOOLING IS PROUD TO OFFER FOR YOUR CONSIDERATION: 11C COLLET SQUARE HOLDING FOR AUTOMATICS AND SCREW MACHINES 1/2" BROWN& SHARPE 1.186" BACK BEARING DIAMETER 2.875" OVERALL LENGTH 1.490" COLLET HEAD DIAMETER NO THREADS USED BUT APPEAR TO BE IN GREAT SHAPE. Inventory Item#5646 Please browse our store and other listings if you have any questions feel free send me a message.New items arriving daily; so if you don't see what you want. Check back. WE GLADLY COMBINE SHIP; Except Auction Items. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. Please wait for an invoice prior to making a payment. We try to describe every item the best that we can. Although we do have experience ... morein the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do combine shipping on everything; Except Auction Items. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired.
|
|
|
Brown & Sharpe EDP 27060 4 piece Machinist Square Set 2" 3" 4" 6" Lot Set
Excellent condition hardly used Brown and Sharpe Squares. In hard case.
|
|
|
RARE DARLING BROWN & SHARPE 4 Inch GRADUATED STEEL SQUARE plus DB&S 3 Inch SCALE
Up for sale is a" RARE DARLING BROWN& SHARPE 4 Inch GRADUATED STEEL SQUARE plus DB&S 3 Inch SCALE" in as found but good used condition. Both have the makers mark, nice old used tools.as shown in picture) NOTE: once the item is paid/ shipped, all of the LABEL/ TRACKING information will always be under PURCHASES in your my eBay with the item you purchased also eBay will send a message to your email address stating your item is shipped. Please take a minute to look at our other items! NO INTERNATIONAL SHIPMENTS! NO PICKUPS OR DELIVERIES! We also sell used tools, some may need recalibrating, some may or may not have etchings, repainting on them from the previous owners, if something isn't in our description or pictured, you can assume it is not included! Method of payments: PAYPAL. Massachusetts residents pay 6.250% sales ... moretax. Good Luck& Happy Buying! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
vintage brown & sharpe 6 inch combination square with center finder.
TEMPERED NO. 4
|
|
|
BROWN&SHARPE # 558 DIRECT READING CYLINDRICAL SQUARE MACHINIST TOOLMAKER INSPECT
You are bidding on a used Brown& Sharpe 558 Cylindrical Square. Direct purchase from a gage lab and kept in XTRA cabinet! IT LOOKS NEVER TO HAVE BEEN USED! MINOR SCRATCHES ON CASE FROM STORAGE IN A CABINET WITH OTHER NEW INSPECTION TOOLING! I BOUGHT ALL OF IT! DIAL BORE GAGES. GAGE BLOCKS ANGLE GAGE BLOCKS, CERAMIC GAGE BLOCKS AND MUCH MUCH MORE! KEEP WATCHING! This item is typically used as a reliable 90° reference standard for CNC or CMM automated manufacturing. THIS SQUARE LOOKS LIKE A NEW ONE AND EVERYTHING WE CHECK WITH IT IS CORRECT TO OUR CURRENTLY CALIBRATED MASTER SQUARE BUT IT IS LISTED AS USED. CASE HAS MINOR SCRATCHES FROM STORAGE. BOTH ENDS ARE CLEARLY MARKED AND SIDE DOTS ARE EASY TO SEE VERY NICE HANDY EXPENSIVE ITEM NO LONGER AVAILABLE FROM BROWN&SHARPE. OUR 1997 CATALOG HAS THEM AT OVER $800 EACH. THE BROWN&SHARPE ... moreCATALOG SAYS: INDICATES"OUT OF SQUARNESS" OF WORK IN UNITS OF.0002" WITHOUT USE OF TRANSFER TOOLS. A TRUE CYLINDER WITH ONE END LAPPED PERFECTLY SQUARE AND THE OTHER END LAPPED TO A FIXED ANGULAR RELATION WITH THE SIDES. WITH THE ANGULAR END DOWN AND THE BASE OF THE CYLINDER IN CONTACT WITH THE PART TO BE CHECKED.THE SQUARE IS ROATATED UNTIL LIGHT IS SHUT OUT. READING THE TOP MOST DOTTED CURVE IN CONTACT WITH THE PART TO THE NUMBER AT THE TOP OF THE SQUARE SHOWS THE"OUT-OF-SQUARNESS" OF THE PART IN 2. 4. 6, TO 12 TEN-THOUSANDTHS OF AN INCH.0001" THE SAME READING MAY BE OBTAINED FROM TWO PLACES ON THE CIRCUMFERENCE OF THE SQUARE.THUS THE INSTRUMENT IS SELF-CHECKING. WITH THE SQUARE END DOWN.IT MAY BE USED AS A MASTER SQUARE WITH ONE OF ITS PERPENDICULAR LINES USED FOR REFERENCE. SQUARE IS APPROXIMATELY 2-1/2" IN DIAMETER AND 6-1/4" HIGH. HARDENED WITH A MINIMUM OF 6RMS SURFACE FINISH. ACCURACY IS WITHIN.0001" SUPPLIED WITH FITTED CASE. SEE PICS. 6-1/4" long x 2-1/2" DIRECT READING SQUARE OTHER END MASTER SQUARE. SQUARE IS A VERY NICE SIZE FOR MOST TOOL-ROOMS. PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES AL
|
|
|
Brown and Sharpe Machinist Tool No 540 Precision Steel Square
Brown& Sharpe MFG Co. Steel Square Tool manufactured in Providence. Rhode Island, USA Model No. 540 Dimensions measure 5.5" x 4" x 0.5" Great Condition with Minimum Scratching
|
|
|
Brown & Sharpe Combination Square-12"Rule,Protractor,Center Head,Square,Hard
FREE PRIORITY SHIPPING Brown& Sharpe Combination Square-12"Rule.Protractor, Center Head and Square Head Hardened.Very High Quality Wide Protractor base Both Level Bubbles Work Used Excellent Condition.Very light engraving on rule See Pictures, Please see my other items Posted with
|
|
|
Vintage 3 pc. Brown & Sharpe 6" Combination Square and Center Head Set
Here is a vintage Brown& Sharpe MFG Co. Machinist 6" Combination Square and Center Head Set. Rule is a No. 4 Tempered. Glass is intact in level and it works. It could use a cleaning. There are initials engraved on one side. Browne& Sharpe Mfg. Co Providence. RI. USA. Please email any questions prior to bidding. Take a look at the other inspection and measuring items we will have up for auction. We will combine multiples purchases when possible. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f22ac2931-0xfa-
|
|
|
Starrett Brown Sharpe ? Indicator square wiggler parts for Machinist Gunsmith
One lot of miscellaneous parts for wiggler. Square head, indicator or? Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f2518c774-0x101-
|
|
|
BROWN & SHARPE COMBINATION SET SQUARE PROTRACTOR CENTER GAGE 12" RULER MACHINIST
VINTAGE BROWN& SHARPE COMBINATION SQUARE PROTRACTOR CENTER GAGE WITH 12" BROWN& SHARPE RULER. IT IS IN GOOD USED WORKING CONDITION& EVERYTHING FUNCTIONS SOOTHLY. IT DOES HAVE THE INITIAL KLIS LIGHTLY INSCRIBED TWICE ON RULER& ONCE ON SQUARE. I TOOK LOTS OF PICTURES SO BE SURE TO CHECK THEM OUT& USE THE ZOOM FEATURE FOR A GOOD CLOSE-UP. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT ME WITH THEM. $9.95 SHIPPING TO THE LOWER 48 U.S. STATES. I WILL BE LISTING A LOT OF OTHER MACHINIST TOOLS OVER THE NEXT FEW DAYS SO BE SURE TO CHECK THEM OUT. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS PURCHASED. PLEASE WAIT FOR INVOICE BEFORE PAYING IF YOU PURCHASE MORE THAN ONE ITEM. THANK YOU FOR LOOKING!
|
|
|
BROWN & SHARPE No. 540 HARDENED PRECISION STEEL MACHINIST SQUARE w BOX TOOLS *A4
BROWN& SHARPE No. 540 HARDENED STEEL MACHINIST SQUARE IN BOX TOOLS*A4 Condition/I n fo: Excellent condition. No engraving, this one is a beauty! The scale/rule in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! ... moreClick here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f34b6765d-0x104-
|
|
|
Antique BROWN & SHARPE 6 IN. NO.4 MACHINIST SQUARE 64th measurement
Antique BROWN& SHARPE 6 IN. NO.4 MACHINIST SQUARE 64th measurement Shows some age. Notched as pictured. One scratch in ruler. Nice usable condition.
|
|
|
Vintage 21" x 11" Brown & Sharpe Machinist Right Angle Square with Case #2
Call Brett At 309-261-5695 for questions. g1 21" x 11" Vintage B& S. Brown& Sharpe Machinist Right Angle Square with Case View all photos carefully. Check out my! Payment due within 7 days of auctions
|
|
|
Brown&Sharpe rule scale starrett square
Up for auction is a 6" tempered#4 rule for brown&sharp square. Has no personal engravings but has some minor pitting on both sides. Posted with the
|
|
|
BROWN & SHARPE Vintage 4 PC Comb. Square Grad: 4R-8ths, 16ths,32nds and 64ths
Pictured is Brown& Sharpe Vintage 4 piece Square Set. 8ths. 16s, 32s, 64s readings. 12& 18 inch rulers blade length. Used. Shipping is by Priority Mail with Delivery Confirmation. Thank you for looking.
|
|
|
Brown & Sharpe 24" Rule and Starrett 12 Rule and Square Head Hardened 4R
The 12 rule and head are marked Starrett and the 24 rule is Brown and Sharpe. Items Must be paid for in 5 days. I accept paypal only and no ECHECKS from paypal EVER! No international shipping ever! Most of my items were not owned by me and although I make every effort to test and describe each item I must sell all my items as is as thats the way I bought them. PA residents will be charged 6% sales tax at check out. Insurance is included in my shipping fees.
|
|
 |