|
TUMICO MACHINIST'S COMBINATION SQURE SET
UP FOR AUCTION IS THIS SLIGHTLY USED TUMICO COMBINATION SQUARE SET. TUMICO HAS BEEN AROUND FOR AT LEAST 70 YEARS. LOCATED IN ST. JAMES MINNESOTA, MAKING PRECISION MESASURING INSTRUMENTS OF HIGH QUALITY LIKE STARRETT, ETC. THIS SET IS COMPLETE: 12" RULE. PROTRACTOR 7IN, 45 DEGREE ANGLE SQUARE, COMBINATION SQUARE AND POINT SCRIBE. THESE PIECES ARE HARDENED. THE BLADE 3033-12 IS GRADUATED IN 64THS. 32NDS, 16THS, A ND 8THS. THERE IS SLIGHT DISCOLORATION ON PROTRACTOR UNFINISHED SURFACES. AND YOU CAN SEE BLUE FINISH IS OFF IN A FEW PLACES. OTHER THAN THESE FEW BLEMISHES THE SET IS IN GOOD CONDITION SHOWING VERY LITTLE WEAR, AND READY TO BE PUT TO WORK. WINNING BIDDER PAYS SHIPPING. LOOK CAREFULLY AT ALL 12 PHOTOS AS THERE ARE NO RETURNS.
|
|
|
TUMICO 18" Height Gauge Inch Vernier Inspection Caliper 0-18" GAGE W WOOD BOX
USED TUMICO 18" Height Gauge Inches Vernier Inspection Caliper 0-18" WITH WOODEN STORAGE BOX.THERE IS SLIGHT RUST AT BOTTOM THAT WILL CLEAN RIGHT OFF,ALSO THE LATCHES ARE BROKE ON BOX,PLEASE SEE MY OTHER AUCTIONS.
|
|
|
VINTAGE SCHERR TUMICO NO.16 0170-00 ENGLISH/METRIC VERNIER CALIPER USA "NICE"
THIS IS A RARE VINTAGE INSIDE/OUTSIDE CALIPER SCHERR TUMICO ENGLISH/METRIC NOS LENGTH OF JAW 1-1/2" NIBS CLOSED.250 VERNIERS SCALES READING 1/1000" 1/50MM HARDENED RECESSED BEAM MEANS LASTING ACCURACY. ADJUSTABLE BUFFER PLATE FOR UNIFORM TENSION OF ADJUSTABLE JAW. COMPLETELY ADJUSTABLE VERNIERS PLATES ARE SET ON BOTH SIDES FOR DIRECT READING. COMES WITH WOODEN CASE MADE IN THE USA OWNERS ENGRAVING MARKS ON TOOL AND THE INSIDE OF THE WOODEN CASE WE NEVER USE A STOCK PHOTO WHAT YOU SEE IN PICTURES IS WHAT YOU GET. SHIPS WITHIN 1 DAY OF PAYMENT SHIPS WITH TRACKING NUMBER AND INSURANCE ANY QUESTIONS PLEASE ASK? WE OFFER FULL MONEY BACK REFUNDS FOR ITEMS THAT ARE NOT AS DESCRIBED. RETURNS FOR OTHER REASONS ARE CONSIDERED ON A CASE BY CASE BASIS.
|
|
|
Scherr Tumico 22-1500-1 Optical Comparator
Scherr Tumico Optical Comparator Features: Surface Illumination- Right Angle Fixture Comes complete with: 10x lens- 20x lens- 30x lens Buyer is responsible for freight costs. It is a larger item. Pick-up is available if you're in the area.
|
|
|
Scherr Tumico .0001 Dial Indicator With Attachments
Scherr Tumico.0001 Dial Indicator With Attachments
|
|
|
Scherr-Tumico Caliper OD Micrometer 2"-3" WOOD BOX - used
Scherr Turmico 2-3" OD Micrometer& Case. Have a used mic here for the workshop or just to keep in the toolbox for future needs. Mic is lightly used. Turns freely and smooth. I do notice a few pits on the side of both anvils. Like if it was left in storage with it being closed. But that can't happen because its 2-3" unless it had a calibration bar installed and left that way in storage. There small and I don't think they will cause a problem. I tried to photo them but can't do with my equipment going down to that small size. The rest is excellent. If you can't use it just send it back. Give you a free week of inspection after receiving it. I think you will like it. Its light to one side. Not bad at all. Happy Bidding
|
|
|
SCHERR-TUMICO MASTER VERNIER CALIPER-(0-42"RANGE)-.001"
SCHERR-TUMICO MASTER VERNIER CALIPER-0-42"RANGE)001" CALIPER IS IN GOOD CONDITION WE HAVE A LARGE SELECTION OF INPECTION AND CALIBRATION EQUIPMENT PLEASE CALL 860-242-4953
|
|
|
Scherr-Tumico Micrometter 1-2"
Up for auction is a Scherr-Tumico 1-2" micrometer. This tool appears to be pretty old as the serial number looks to be handwritten on it. The serial number reads"s/n 41638" and there's also what appears to be"cs 26-2" etched into it. Please ask any questions or concerns before bidding. Check out my! PAYMENT METHODS Paypal is the preferred method of payment! SHIPPING Domestic shipping and insurance for this item by UPS Ground will be AS STATED. ALL UPS shipments over $50 are shipped with a signature required unless otherwise informed not to. NO ITEMS WILL BE SHIPPED OUTSIDE THE LOWER 48 STATES. We DO NOT ship internationally. THIS INCLUDES ALL U.S. TERRITORIES AND PROTECTORATES. We are sorry for the inconvenience. TERMS OF SALE All items are sold as presented with no warranties implied or granted. Please read all ... moreinformation in the shipping portion of our policies found in both our ad listings and our store policy pages. Please ask questions. Do not assume anything. We respond to all questions as quickly as possible and to the best of our ability and knowledge. RETURNS We do the research during the listing process to insure that what we are selling is described to the best of our ability and that the item was tested. Because of this policy. If items are returned, we will not be responsible for the shipping charges! If you bid on an item, you will be responsible for all eBay fees for the interruption of the auction process and shipping costs! CUSTOMER SERVICE You can reach us by telephone Monday through Friday. 9:00 A.M. to 6:00 P.M. est. at(706)322-0561. AUCTION DISCLAIMER WE DO NOT SHIP INTERNATIONALLY OR OUTSIDE OF THE LOWER 48 STATES. Please take this into consideration before bidding on the item for sale.
|
|
|
SCHERR TUMICO VERNIER INSIDE MICROMETER INTERCHANGEABLE ROD 1.5"-12.5" RANGE
IN GREAT CONDITION IT DOES HAVE OWNERS ENGRAVING MARKINGS ON THE INSIDE OF WOODEN CASE AND ON THE MICROMETER HEAD. BUT NO WHERE ELSE. APPEARS IN LIKE NEW CONDITION, I PURCHASED THIS AT AN ESTATE SALE. SCHERR TUMICO VERNIER INSIDE MICROMETER INTERCHANGEABLE ROD'S 1.5"12.5" Range 0.001 Graduation. +/0.0005" Accuracy. Micrometer head measuring capacity = 0.5" Analog display type Interchangeable rod 1.5" x 12.5" measuring size 0.001" Graduation Spacing collar length 0.5" Micrometer head measuring capacity 0.5" WE NEVER USE A STOCK PHOTO. WHAT YOU SEE IN PICTURES IS WHAT YOU GET. WE OFFER FULL MONEY BACK REFUNDS FOR ITEMS THAT ARE NOT AS DESCRIBED. RETURNS FOR OTHER REASONS ARE CONSIDERED ON A CASE BY CASE BASIS. ANY QUESTIONS PLEASE ASK?
|
|
|
LOT OF 4 BSI OPTICAL PRECISION X TRAVEL STAGES w/ SCHERR-TUMICO MICROMETER
LOT OF 4 BSI OPTICAL PRECISION X TRAVEL STAGES w/ SCHERR-TUMICO MICROMETER Comes as shown in photos(E)
|
|
|
SCHERR -TUMICO USA made 0-1" Outside Micrometer; Vernier Scale
SCHERR-TUMICO USA made 0-1" Outside Micrometer; Vernier Scale Range: 0-1 inch Read out gradations: 0.001 inch(not including the vernier scale) Measurements detailed as 0.0001(1/10.000th) inch On one side of the micrometer are decimal equivalents for 32nds and the other side has decimal equivalents for 64ths. There are some minor oxidation marks on the U-frame and micrometer rod. See pictures. Opening and closing rotation is very smooth. This is my micrometer and it got very little use as I was in quality management and not on the job measuring daily. . Good luck bidding! I only accept PAYPAL and ship using the eBay Global Shipping Program as needed. TERMS& CONDITIONS: Items are sold"As Is" with"No Warranty" and with No Returns! I only accept PayPa l. Every item will be shipped with a delivery tracking ... morenumber and using the terms of the eBay Global Shipping Program as needed. I check over the items I sell before listing them. The y are safely and securely packed. Please review the photos closely.I do list any significant flaws but not every minor detail. Payment is expected within 3 business days of the auction's end. G uaranteed shipment within 3 business days of receipt of payment. Please only bid if you intend to pay. All email answered ASAP. Buyer to pay shipping. Thank you for reading my ad.
|
|
|
Vintage Scherr Tumico 12 inch No. 4 Grid RULER & SQUARE for Machinist Protractor
This a sale of one Scherr Tumico 12 inch Lufkin No. 16 Grad Ruler with a Square(and level inside the square) This is a 12 inch tempered steel ruler with grooves for use with a protractor or center finder that is the appropriate size. It has hardened steel heads. It's seen better days. But with a solution soak and a steel wool cleaning it might get better. Please See the photos and judge the condition for yourself. SHIPPING: Shipping is by USPS first class or priority mail within one business day of payment. Normal 0 false false false MicrosoftInternetExplorer4 ABOUT SHIPPING CHARGES: I can no longer charge just actual shipping cost. Ebay has decided to start charging all sellers a 13% fee on what we charge for shipping. So. If I charge actual cost, I lose money on shipping. I can't do that& keep selling all this hard to find stuff.
|
|
|
Nice Tumico 0-1 blade micrometer.. accurate. Light frame
Nice Tumico 0-1 blade micrometer. accurate. Good condition Smooth operation#UJ03 We accept all major credit cards and PayPal. You do not have to have a PayPal account to use their credit card portal. Just use your Visa or MC as normal at their site. Payment is required within 12 hours or the sale could be canceled and the item re-listed We ship very fast and usually free. Almost all items go out the same day with a USPS tracking number which will be posted in your"Items Purchased" page. Expected delivery is two or three business days but most often sooner. Larger items are shipped UPS ground with two to five business days delivery and the buyer pays for that shipping International buyers are responsible for all duties. Tariffs, or other surcharges invoked by their government or their delivery company UPS international buyers must ... morehave a telephone number listed on the freight bill Our policies are aligned with Ebay best practices. Returns are accepted within 14 days if not as described or DOA. Please look carefully at our exceptional imaging(beware of sellers who show just a few dark out of focus images) Ask us questions Some items cannot be returned unless returned in exactly the same packaging as sent. This will be noted in their description.
|
|
|
ANTIQUE MAUSER VERNIER 6” SLIDE CALIPER SCHERR TUMICO CO. GERMAN
Nice 6" vernier calipers in original plastic case. Made for Scherr-Tumico by Mauser. Made in Germany. Looks well kept and clean. Also says"Stainless. Hardened throughout" on it. Good condition! Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $5. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
|
|
|
Scherr Tumico 14"Optical Comparator,Surface/Contour Illum. INV=13665
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Scherr-Tumico 14" Optical Comparator. Serial No.8422. Surface illumination and contour illumination. 10X Lens. Micro- adjustable longitudinal and cross travel. 6-Position barrel dead- stop for longitudinal travel. Chart with 0.004" per line resolution using 10X magnification. Please review the photographs to see the comparator turned-on with a sample part positioned for viewing. As always, do not hesitate to ask me any relevant questions about this item. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer ... morehas three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further und
|
|
|
TUMICO CHROME 13''-14'' OUTSIDE MICROMETERS W/STANDARD & BOX
NICE INSPECTION MICROMETERS. I WILL BE SELLING CONTENTS OF FAMILY RUN MACHINE SHOP. I WILL BE LISTING SEVERAL ITEMS SUCH AS INSPECTION EQUIPMENT, LATH& MILL TOOLING, AS WELL AS MACHINERY OF ALL KINDS. THIS IS ALL HIGH QUALITY TOP OF THE LINE EQUIPMENT. 703-898-4064
|
|
|
4 Outside Micrometers USA Made Scheer Tumico
Welcome, Up for sale at a low buy it now price are 4 outside micrometers made in the USA by Scheer Tumico. You get a 0-1 inch. 1-2 inch, 2-3 inch and a 4-5 inch. These precision measuring tools are government surplus. They are used. They work properly. The 0-1 mic and the 4-5 mic come with their wooden case. Free Shipping! Machinist. Toolmaker, quality control, Gunsmith, Moldmaker, Posted with
|
|
|
Vintage Tumico Micrometer No 814 Gauge Gage - Used
VINTAGE TUMICO MICROMETER NO 814 GAUGE* This auction is for a used vintage Tumico Micrometer No 814 gauge. This piece has some facial rust and pitting to the finish. All items are as pictured. All items may need to be cleaned. Please see the picture(s) for further details. Please feel free to ask questions; be sure to include your ebay email address since I do not use my ebay to answer emails. If I am sending your package via USPS. I will email your delivery confirmation and shipping date to your paypal email address. I do offer combined shipping on multiple won auctions. Please email me when you have finished bidding so I can send you a combined invoice. Please allow me time to package your items together. SHIPPING: Please use the shipping calculator to determine your shipping costs. Local pick-ups in Zuni. VA, are welcome. INTERNATIONAL ... moreBIDDERS, please see terms for international sales below. Please check out my terms and policies listed below. For additional information about me and my policies. Please check out my"about me" page(click on"me" behind my name) By bidding, you are agreeing to all terms listed in this auction, including s&h, and have read my"about me" page. NO RESERVE. TERMS: Buyer pre-pays all shipping and handling charges. Insurance is included in the shipping cost. Payment must be received within 5 days from auction close. ALL ITEMS ARE SOLD AS IS; NO GUARANTEES. ALL SALES ARE FINAL. No refunds or returns. We NEVER offer partial refunds. By bidding. You are agreeing to all terms of sale listed in the auction. I only ship Monday-Friday. Packages are normally shipped out the next business day if payment is received by 8pm Eastern Time. Payments received after Thursday. 8pm through Sunday, 8pm, will be mailed out the following Monday. US BIDDERS: ONLY payment accepted is paypal. Payment MUST be received 5 days from close of auction. Please email me with questions prior to bidding. All sales are FINAL. All items sold as is. Please check out my other auctions. ALL S
|
|
|
Sherr Tumico Height Gage Machinist Set Up / Inspection Tool Metal Lathe Milling
24" scherr tumico height gage 395-24. See pics of actual item you will receive. Do not forget to check out my other items for more great tooling finds. Posted with
|
|
|
Small Sherr-Tumico 150-0-150 Gram Tension/Compression Spring Scale (dynamometer)
Small Sherr-Tumico 150-0-150 Gram Tension/Compression Spring Scale(dynamometer) Click to View Image Album Nicely made. In France, and in nice condition. 150-0-150 gram full range tension/compression scale. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state ... morethat and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping column. We do combine purchases when they are paid at the same time. Remember eBay penalizes sellers who do not ship withing 24 hours
|
|
|
0 -- 3 Inch Tumico Depth Micrometer. 4 Inch Wide Base.
800x600 0- 3 Inch Tumico Depth Micrometer. 4 Inch Wide Base. Ratchet Thimble. Includes micrometer head. 3 interchangeable depth rods, 3 adjustment wrenches, all in a fitted wooden case. Made by Tubular Micrometer Co. St. James, Minnesota USA. Good used condition. Does have former owner’s name engraved. Buyer to pay shipping on 2 pounds. I will gladly combine items for lowest cost shipping. I accept PayPal and other reasonable methods of payment. Please check out my other auctions for more tool bargains. Thanks. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
|
Tumico Machinist Caliper S5-10
856-881-3185 SKU: AEZ135 Tumico Machinist Caliper S5-10. Brand: Tumico Condition: used Model: S5-10 Lot# AEZ 135 vid3.5 We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 7:30 AM- 4:30 PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is something we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:00 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order b
|
|
|
Scherr Tumico 10-11" Micrometer Dial Measuring Tool
Used Scherr Tumico 10-11" micrometer. Works great. Professionally used. What you see I the photos is what you get. Please see my other micrometers for sale. Thank you. Posted with
|
|
|
Scherr Tumico 7-8 Micrometer Dial Measuring Tool
Used Scherr Tumico 7-8" micrometer. Works great. Professionally used. What you see I the photos is what you get. Please see my other micrometers for sale. Thank you. Posted with
|
|
|
TUMICO, TUBULAR MICROMETER CO. SET OF 6, 10"-11",11"-12",12"-13",13"-14",17"-18"
TUBULAR MICOMETER CO. ST. JAMES MINN. MADE IN THE USA.SET OF 6 OUTSIDE MICROMETERS. 10"11"11"12"12"13"13"14"17"18"18"19"
|
|
|
Seherr Tumico Indicating Micrometer 0 - 1" .0001" Case, Carbide Faces, Machinist
FREE PRIORITY SHIPPING Seherr Tumico Indicating Micrometer 0- 1" 0001" Carbide Faces Wrench Case High Quality.Heavy Duty In Great Condition.Smooth Turning Thimble, some dings and scratches,See Pictures PLEASE SEE MY OTHER ITEM THANKS
|
|
|
Scherr Tumico Tubular Vernier Inside Micrometer, 4-5" Range, 0.001"
Older pair of inside 4-5mics. Made in ST. JAMES. MINN. USA
|
|
|
Scherr Tumico .001"-1.0" Travel Dial Indicator - RL0
Click thumbs to Enlarge Any additional photos will be below This Scherr Tumico.001"1.0" Travel Dial Indicator is used and in great shape. With few signs of wear from light use. I inspected and tested this dial indicator and found it works well, all features are intact and fully functional, with no issues to be found. Auction to include exactly the Scherr Tumico 1"dial indicator featured in the pictures only. Feel free with any questions and have a great day. Auction includes: Scherr Tumico.001"1.0" Travel Dial Indicator, SKU: 1/13d3-254-70231-as Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address ... moreyour card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: $5 Per item handling fee. Contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Includ
|
|
|
Scherr Tumico .0001 Dial Indicator with attachments as shown
Scherr Tumico.0001 jewelled Dial Indicator. Model 50-5077, with attachments as shown. Used but in good working and measurement condition.
|
|
|
1992 Scherr Tumico 30" Comparator Rotary Turret & Quadra 10-20-50-100X lens
Scherr Tumico 30" Comparator with Rotary Turret& Quadra 10-20-50-100X lens 1992 Scherr Tumico 30” Optical Comparator with Rotary Turret and Quadra Check Digital. Surface Illumination. Model#22-5601-1992 Includes 10X– 20X– 50X& 100X Lens Please call Mickey at 760/662-9299 if you have any questions. Buyer is responsible for Shipping Arrangements and Fees but we will load Machine onto your truck with our Forklift. Please see our store for more great cutting tool and machinery deals. Thank You for looking. We describe our items as accurately as possible and include as many photos as we can so that you can see exactly what you are bidding on because what you see is what you actually get. Any questions. Please call Mickey at 760-662-9299. You can also email us through Ebay or We will be listing more machines and HUNDREDS of End Mills ... morein the coming weeks. Please check back often. Thank you for looking.
|
|
|
Scherr-Tumico Model 1415 Precision Level T-55-671
Auction Wizard 2000 Listing Template- AW2KLOT#210 Scherr-Tumico Model 1415 Precision Level T-55-671 This auction is for a Scherr-Tumico precison level. Model 1415. It is in good condition and has minor scratches and scuffs, due to normal usage. It is functional and ready for use. NSN is listed as 5210-241-3609 However this number seems to be inaccurate. T-55-671 is also written on bottom of the level. Measures: 15" x 1 1/2" x 3"H Weight: 6 lb 4 ounces 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1444c4bafbb-0x102-
|
|
|
Vintage Scherr-Tumico dynamometer force gauge 250 grammes -Detroit Auto Plant
Vintage Detroit. Imagine the auto worker who used this tool every day to make American muscle. Found in a closed Detroit auto plant. Works like new. Buy a piece of history. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1444cff524a-0xf1-
|
|
|
Scherr Tumico 11-12" Micromter Dial Measuring Tool
Used Scherr Tumico 11-12" micrometer. Works great. Professionally used. What you see I the photos is what you get. Please see my other micrometers for sale. Thank you. Posted with a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14454f8a7ee-0x10a-
|
|
|
SCHERR TUMICO NO.16 0170 ENGLISH/METRIC VERNIER CALIPER USA with BONUS
Up for action is used Scherr& Tumico high quality 8" caliper# 16 0170. Metric and Standard. Bonus- Helios micrometer 0-1" and.0001 new or like new. Shipping to CONUS only.
|
|
|
TUMICO "TUBULAR MICROMETER CO. FEATHER TOUCH" COMPLETE 9PC. SET IN CASE, VINTAGE
This listing is for a VINTAGE IN ORIGINAL WOODEN CASE. TUBULAR MICROMETER CO. TUMICO FEATHER TOUCH SET. Numbers on the Micrometer are 2-6" The Brown Wooden Case is Fairly Trashed. Meaning is shows quite a bit of wear-dings, scratches& dirt. TUMICO is impressed in the Wood; the Front Hook Latches& Back Hinges are Good. The case stays closed& will protect the contents. The inside case is also pretty grungy& could use a cleaning. The aroma is similar to both"axel grease" wood; the tools have likely been used and/or at least"lubed" are in Good, Clean Condition. There are 9 Grooves in the Case for all of the parts; the set is complete. The Micrometer is"Feather Touch" lightweight. The top is 10 3/4" long, 7" long below the curve, 1 1/2" wide at the lower center& 1/2" thick. ... moreThe numbers, 2-6" are on the front of the Micrometer; there are various numbers along the top of the tool; TUBULAR MICROMETER CO. ST. JAMES. MINN. U.S.A. also printed along the top of the Micrometer. There are various sized parts& a"wrench-like tool" that fit in each slot. Metal Plate Label is fastened on the upper inside: TUBULAR MICROMETER CO. TUMICO ST. JAMES. MINN. U.S.A. FEATHER TOUCH M06-LN. Solid. Wooden Case is 12 1/2"x7"x1 1/2" Excellent Collectable that is also useful! Please check out our other VINTAGE TOOL CASE SETS we have listed! Please feel free to ask?s prior to purchasing; my response time is usually fast. Item comes from a home shared w/kitties& a puppy. ENJOY FREE U.S.A. SHIPPING WITH ALL OF MY ITEMS! Please Pay For A Single Item Within 3 Days; I Really HATE The Drama Of Non-Paying Bidders. If There's A Problem With Payment. Please Contact Me So We Can Work It Out. I Ship As Soon As I'm Paid-Please Account For Sunday's& Holidays. PAYPAL PAYMENT-CONFIRMED/VERIFIED ADDRESSES ONLY-NO EXCEPTIONS. International Customers are Responsible For All Shipping Charges Including Customs Fees. Taxes, Etc. AS PER eBay
|
|
|
ST Industries 14" Optical Comparator 20-4200 Scherr Tumico
ST Industries Optical Comparator Model: 20-4200 Minor surface rust on the stage noted. See pictures. S-T INDUSTRIES INC OPTICAL PROJECTION COMPARATOR P/ N 20-4200 14 IN. HORIZONTAL BEAM STEEL CONSTRUCTION ULTRA-BRIGHT TUNGSTEN-HALOGEN PROFILE ILLUMINATION FULL 14 IN. DIA FIXED GLASS SCREEN W/ 90 DEG CROSSLINES 360 DEG IN 1/ 2 IN. INCREMENTS RUGGED PRECISION MEASURING STAGE WITH 4 X 12 IN. TOP PLATE Item is from a recent facility closure. Contact Justin at 503.464.6013 with any questions. The unit is located in Mentor. OH. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE ... moreDO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from th
|
|
|
8" x 8" Optical Linear Stage XY 2 Axis with Scherr Tumico Micrometers
WE ACCEPT ALL MAJOR CREDIT CARDS Please call us for Direct Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION 8" x 8" 2 Axis Linear Stage_ This item was working before removal. But we do not have the equipment or the ability to fully test it. For this reason, the item is being SOLD AS IS. Cosmetically. It is in good condition with some usage ware. For more information on the cosmetics of the item for sale, please take a look at our pictures near the bottom of the page. Thank you. OVERALL DIMENSIONS 16" x 16" x 6" 60lbs LCW 22714 1_ Shipping: Shipping to the United States will be: $75. We ship worldwide! Just email us for a quote on International Shipping. Salesbaron is in Los Angeles. ... more90039 No Charge on Local Pickups! PAYMENTS We accept PayPal and all major credit cards. Please contact us for direct credit card payments. SHIPPING Packages are usually shipped within 5-Days of payment receipt(excluding Saturday/Sunday) All orders are shipped via FedEx and USPS. International buyers. Please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. RETURNS We list and photograph every item we sell so you can feel confident when bidding. We only accept returns under certain circumstances with in 14 days of delivery. Shipping costs are non-refundable. CONTACT US Monday- Friday: 9am to 6pm PST Saturday: 9am to 2pm PST Address: 4587 Brazil Street Los Angeles. CA 90039 Telephone: 818-241-2265 ABOUT US Sales Baron is one of the fastest growing eBay consignment stores ba
|
|
|
Scheer Tumico USA 1 1/4 to 2" inside micrometer tool tools machinist toolmaker
you get what you see except for the $1.used.not damaged.clean.it is not engraved.satin.in its wood protective case. measures.001 works fine.Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plus $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
SCHERR TUMICO DYNAMOMETER 500 WELL KEPT & GOOD CONDITION MADE IN FRANCE
SCHERR- TUMICO GRAMMES 500 DYNAMONETER
|
|
|
Sherr Tumico 20-3500
This is a Sherr Tumico model 20-3500. It was set up with digital X Y axis read out but does not have the digital read out. Unit is available for inspection. It is sold AS IS WHERE IS. I can load and assist with shipping. Posted with
|
|
|
Scherr Tumico Group Tubular Frame Outside Micrometer w/ Case 7-8"
Manufacturer: Scherr Tumico Item Title: T-Series Tubular Frame Outside Micrometer w/ Case Specifications: Size: 8" Range: 7-8" Graduation: 0001" 7" Standard included Hammertone-green. Baked-enamelfinished frame. Hammertone-green. Baked-enamelfinished frame. Hammertone-green. Baked-enamelfinished frame. Hammertone-green. Baked-enamelfinished frame. Hammertone-green. Baked-enamelfinished frame. Hammertone-green. Baked-enamelfinished frame. Wooden Case Included List Price $262.10 Condition: Used. Pulled from a machine shop in good condition. I ship in 1 business day of payment receipt with tracking information.
|
|
|
TUMICO 1"-2" CHROME PLATED MICROMETER IN BOX
This is a Tumico 1"2" chrome plated micrometer in box. Includes adapter to allow 1" with wrench. I ship to the US only. I expect payment 5 days after auction ends.
|
|
|
Ball micrometer 1-2" Scherr-Tumico
Ball micrometer 1-2" Scherr-Tumico. Micrometer only, no case in excellent used condition. Used to measure wall thickness of cylindrical objects.
|
|
|
Scherr-Tumico Vernier Caliper # 16 0185 12" Machinist Tool !! B151
Description Clean and Shiny in appearance. Fully tested and working like new! Additional pictures are located at the bottom of the ad. We try our hardest to give 5-Star Service by giving Clear. Accurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect. If you are pleased with this transaction. Please respond with all 5 Stars! If you are not pleased for any reason, Please contact us using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! Sales within the State of Colorado Will have State and local tax applied where applicable. We take care to pack your items professionally. Therefore items can take up to 7 days or more to ship after payment has cleared when we are backed up. Typically it is only a ... morecouple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14494bf43dd-0xea-
|
|
|
Scherr-Tumico Depth Micrometer Replacement Rods Craftsman Monarch Bridgeport
This is a pair of spair/replacement measuring rods for a Scherr-Tumico depth micrometer. I believe they will also fit some Craftsman depth micrometers that were made by Scherr-Tumico for Craftsman. These two rods are for 3"4" and 4"5" measuring range and each is in excellent condtion. I found it very usefull on occasion to have a spair rod to grind(relieve) to a near point for measuring to the bottom of a concave surface. Look close and ask any questions you have. No returns. Thanks for looking.
|
|
|
Scherr-Tumico Half Base 0-6" Depth Micrometer Monarch Cincinnati Bridgeport Jet
This is a used Scherr-Tumico 0-6" half base depth micrometer. It is in excellent condtion with no etched names or initials. It comes in the orginal wooden fitted case that is in great condtion and includes 2 adjusting wrenches. The distance from the spindle centerline to the tip of the base is 2" half of a 4" base) It has a lock ring and a ratchet stop. Look close and ask any questions you have. No returns. Thanks for looking.
|
|
|
TUMICO 0-1 Inch BLADE MICROMETER w/ CASE - USA
Up for sale is a" TUMICO 0-1 Inch BLADE MICROMETER w/ CASE- USA" in as found but excellent LOOKING/ WORKING condition. SMOOTH MOVEMENT, no damage to the blades, spindle turns freely, has company name/ numbers acid etched on the frame, company closure, clean beautiful working useful used tool!as shown in pictures) NOTE: once the item is paid/ shipped, all of the LABEL/ TRACKING information will always be under PURCHASES in your my eBay with the item you purchased also eBay will send a message to your email address stating your item is shipped. Please take a minute to look at our other items! NO INTERNATIONAL SHIPMENTS! NO PICKUPS OR DELIVERIES! We also sell used tools, some may need recalibrating, some may or may not have etchings, repainting on them from the previous owners, if something isn't in our description or pictured, ... moreyou can assume it is not included! Method of payments: PAYPAL. Massachusetts residents pay 6.250% sales tax. Good Luck& Happy Buying! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Precision Measuring Tools Catalog T-84 Scherr Tumico S-T Industries 1988
Scherr Tumico Precision Measuring Tools Catalog T-84. From a smoke free home. 224 Pages. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14494c8e8ef-0x106-
|
|
|
Lot of 4x Tesa mitutoyo & scherr tumico 0-1" Micrometer Swiss wood case LAC4
Geeky Surplus This Auction is for a Lot of 4x Tesa mitutoyo& scherr tumico 0-1" Micrometer Swiss wood case LAC4 About. ATTENTION: What is pictured above is what to expect. Unless stated otherwise in the title or description above. All used items are sold un-tested unless stated otherwise. Shipping. All items will be packaged and shipped within 1-2 business days. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We are not held responsible for delays in shipping due to customs. Shipping times for international shipments can take up to 30-45 days depending on holidays and/or customs. Payment. ... moreWe accept payments of Credit Card. Debit Card, or E-checks through PayPal only. Please pay within 3 days or please contact us to arrange payment or to cancel the transaction. Powered by
|
|
|
Lot of 2 Micrometers Scherr-tumico & NSK -USED 1to2" & 2to3"
hi- have here a 1to2" and a 2to3" good used micrometers have had these a while and checked them against my standards and they seam to be spot on- low starting bid- do not need them anymore- thanks for looking-USA SHIPPING ONLY-
|
|
|
SCHERR-TUMICO 0-100 GRAMMES SCALE FORCE TENSION GAUGE
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. SCHERR-TUMICO 0-100 GRAMMES SCALE FORCE TENSION GAUGE This auction is for one Scherr-Tumico 100 ... moreGram Force Tension Gauge. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the item. We will only ship to locations in the United States using our shipping account. If
|
|
|
0 - 26.5" caliper scale, SCHERR TUMICO 16-0211 caliper SAE or Metric
SCHERR TUMICO# 16-0211 caliper 0- 26.5" caliper scale. SAE or Metric- 0- 26 1/2" inch capacity- SAE one side. MM other side It is in nice condition. Please check out the pictures closely. I ship in 1 business day of payment receipt with tracking information. many other calipers and micrometers in our store. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144a018dd79-0xf9-
|
|
|
TUMICO 15" TO 16" TUBULAR MICROMETER
HERES A USED TUMICO 15 TO 16 INCH TUBULAR MICROMETER THAT SEEMS TO BE I GOOD CONDITIO IN THE ORIGINAL BOX.THIS WILL BE BOXED IN FOAM AS SHIPPED UPS. GLOBAL SURPLUS. STOP IN AT THE GLOBAL SURPLUS STORE BETWEEN THE HOURS OF 8:00 AM TO 3:00 PM MONDAY THRU FRIDAY AND LOOK AT MANY SURPLUS ITEMS.FEW NEW BUT MANY AT COST SAVING USED PRICES,FOR FREIGHT QUOTES,YOU CAN USE WHOEVER YOU LIKE,WE USE SCOTT CYRUS AT UTI AND HE CAN BE REACHED AT 714-710-9078,HE GIVES GOOD FREIGHT RATES TO ANYWHERE YOU WANT TO SHIP,WE DO NOT RECIEVE ANY BETTER QUOTES THAN YOU CAN THEREFORE,WE ASK YOU TO CALL DIRECT,THANK YOU.
|
|
|
SCHERR-TUMICO #451161 "COMBINATION SQUARE BLADE" ( 24" LENGTH ) .050" & MM
DESCRIPTION: HARDENED STEEL SQUARE BLADE( 1) LOT OF( 1) PC. GRADUATIONS: QUICK READING: 1.0MM& 5MM) AIRCRAFT QUICK READING: 050" 050" SIZE IS INTERCHANGEABLE LENGTH: 24" WIDTH: 1.0" THICKNESS: 3/32" FINISH: SATIN CHROME( AS FOR BEING USED) THIS BLADE IS IN GOOD WORKING& COSMETIC CONDITION SOLD-AS-PICTURED
|
|
|
Vintage Tools 2 Steel 12" Miter Combination Squares w Levels TUMICO & CRAFTSMAN
Vintage Tools Lot 2 Steel 12" Combination Squares w Levels TUMICO& CRAFTSMAN Vintage Lot Antique Tools TUMICO& CRAFTSMAN Steel Combination Squares with Level Tumico: 12"X4.25" Craftsman:12"X3.75" See Photos! Used Good Working Condition! Normal wear I ship USPS upon cleared payment. If you are outside of the USA. Item will be shipped USPS Priority Mail International, where available. Buy with Confidence Paypal Verified Seller Money Back Guarantee Returns Accepted within 14 days All items must be returned in original. Undamaged, working condition with all parts intact and all accessories. Please don't forget to leave feedback! Email if you have any questions before bidding. Please Thanks for looking! Happy Bidding!
|
|
|
RARE SCHERR TUMICO GERMANY NO.1328 PRECISION 6" DIAL CALIPER +/- 0.001 EXC NR
This very rare Scherr Tumico No. 1328. 6 inch dial caliper is in excellent, unblemished condition. It was made in Germany from hardened steel, but is so rare I could not find manufacturing dates. There are companies on line that offer calibration services for this specific caliper, so I will assume it is a very precise instrument. It comes in it's original plastic case with handling instructions. I will not change my auctions to'buy it now' Or close them early, so please don't ask. Please email for more pics or information. I offer a full refund if not satisfied. With buyer paying return shipping, unless I have misrepresented the item. I will combine items for shipping when possible. Buyer pays shipping parcel select, including tracking. Payment is due within 3 days of close of auction. I accept only Paypal for payment, unless ... moreother arrangements are made before auction ends. I will contact buyer after close of auction. Thanks for looking and good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144aa82f38c-0xff-
|
|
|
Scherr Tumico .0001 tenth .200 range dial test indicator travel
Out of calibration sticker. 0001 tenth indicator.200 of travel.
|
|
|
Vintage Scherr Tumico Precision Dial Dynamometer 0-100 Grammes in Case France
You are bidding on a Vintage Scheer Tumico Dial Dynamometer 0-100 Grammes Made in France In excellent condition. Case shows wear and peeling Free Shipping I make every effort to pack& ship your item with utmost care in order that it arrives safely ~(You will receive your item packed the way I would like to receive all my purchases) I typically ship within 24 hours of payment. And leave positive feedback the same day as I ship. I will gladly combine shipping when possible. I describe items as I see them, but if I make a mistake, please contact me and I will do my best to resolve the problem. RETURN POLICY: If the item is not as described. Please contact me within 3 days of receipt of the item, and I will refund you payment as soon as the item is returned in the same condition as received. No refund will be given for return shipping.
|
|
|
Scherr Tumico 0-12" Depth micrometer made in USA not Starrett
For sale. Scherr Tumico 0-12" Depth micrometer. Made in USA, In good shape. This is missing the rod to measure between 1-2" everything else is in box. Item in pictures is item you'll receive. I have other measuring tools listed. I will combine shipping on my auctions to get you the cheapest rate. Please pay within 2 days of auction close. Thank you and please see my other auctions.
|
|
|
Machinist tools Starrett indicator set,Tumico depth mic and 1" outside mic
This is a set of 4 machinist tools. A starrett back plunge indicator set the hand will make 2 complete revolutions so you have a.200 range All the peices are in the box and are in good shape. A tumico 0-3" depth mic it has the three rods to change the depth the base is 4" the 1" mic I don't see a name on. But the contact surfaces are good and smooth, you also get a general 6" dial caliper. Good tools ready to go to work.
|
|
|
Scherr Tumico Set of 6 Varying Sized Blade Micrometers W Wooden Case
Set is government surplus and was used on a government aircraft. Case is marked"government property" Several of the micrometers appear unused. The spare rods show signs of surface rust, and two micrometers have slight rust on the points. See pictures. Case is original but not in the greatest of condition. All micrometers function normally. Posted with
|
|
|
Scherr Tumico 30" Comparator.0001- dro 10-20-50-lens *Excellent Condition*-CMM
Scherr Tumico 30" Comparator 0001 dro-10-20-50- lens*Excellent Condition* Excellent Condition* 3 0" Scherr Tumico Optical Comparator and Measuring Machine 10X-20X-50- Lens 0001-DRO. 22-2500 Specifications: Screen Diameter: 30" Size of Work Table: 8" X 35" Measuring Capacity Longitudinal Table Travel: 12" Vertical Table Travel: 9" Angular Measuring Capacity: 360 Degree Chart Rotation Helix Adjustment By Swinging LampHouse: 10 Degrees Left and Right Allowable Workload on Table: 500 lbs Floor Space: 50" Left to Right X 96" F-B with Visor X 80" High Weight: 1800 lbs. Counter Display for Chart Rotation Power Longitudinal Travel. Infinitely Variable Speed Control Power Elevation, Infinitely Variable Speed Power Chart Rotation Duplex Surface Illumination Light Visor with Blackout Side Curtains Electrical: ... more110 Volts.0001 D.R.O. X and Z 10X-20X-50- Lens. Centers and Assorted Tooling Machine is located in Northeastern Ohio. Please call Mickey at 760/662-9299 if you have any questions. Buyer is responsible for Shipping Arrangements and Fees but we will load Machine onto your truck with our Forklift. Please see our store for more great cutting tool and machinery deals. Thank You for looking. We describe our items as accurately as possible and include as many photos as we can so that you can see exactly what you are bidding on because what you see is what you actually get. Any questions. Please call Mickey at 760-662-9299. You can also email us through Ebay or We will be listing more machines and HUNDREDS of End Mills in the coming weeks. Please check back often. Thank you for looking.
|
|
|
^^ SCHERR TUMICO 02 0851 29 C 85ILRM MICROMETER
^^ SCHERR TUMICO 02 0851 29 C 85ILRM MICROMETER Description: Thank you for your interest! We are auctioning off this ^^ SCHERR TUMICO 02 0851 29 C 85ILRM MICROMETER Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. Comes as shown. Some cosmetic wear. Opening is approx 1" Very small unit. USA CUSTOMERS- NO MEANS TO TEST. However will offer a 14 day guarantee to try it out fully with right of return. INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. And due to the cost to ship internationally and the distance items have to travel, ALL items shipped outside of the USA are SOLD AS IS WITH NO GUARANTEES. We love our international customers and would love to have your business but due to the nature ... moreof the used equipment, and that all items are untested and used, all sales are final. No refunds or returns, please bid accordingly! 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be mor
|
|
|
0-1'' micrometer with wood box scherr-tumico inc st james minn
0-1' micrometer made in the usa
|
|
|
SHERR TUMICO TUBULAR MICROMETER BORE GAUGE
SHERR TUMICO TUBULAR MICROMETER BORE GAUGE This guage moves stiffly. It will need to be serviced. New Jersey sales tax will be charged to New Jersey. Shipping will be free.
|
|
|
Scherr Tumico 6 pc. Telescoping Gage Set 1/2" to 6"
Scherr Tumico 6 pc. Telescoping Gage Set 1/2" to 6" Item Description Shipping and Payment Spuds will combine shipping on multiple items when possible. Please feel free to e-mail me if you have any questions. Alaska. Hawaii along with US Territories and APO's shipped via USPS Priority Mail may require additional shipping charges. INTERNATIONAL BIDDERS. WE WILL ACCEPT ONLY U.S. FUNDS. Please check out Spuds' other auctions. New items added every day. inkfrog terapeak. I000000. InkFrog Analytics. Lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144be5740c9-0x10e-
|
|
|
MAUSER SIX INCH CALIPER - SCHERR-TUMICO GERMANY - MACHINIST TOOL SUPER CLEAN
MAUSER SIX INCH CALIPER- SCHERR-TUMICO GERMANY- MACHINIST TOOL SUPER CLEAN NO OWNER INSCRIBED AS NICE AS THEY COME FOR ITS AGE
|
|
|
30" Scherr Tumico ST, Model 22-2500 Optical Comparator
We are Genx Corporation. We offer our Genx brand comparator new. Used, and rebuilt, and most other optical comparator brands as well. This 30" Scherr Tumico is in excellent working condition, all systems have been thoroughly inspected, and corrected where necessary. We can tailor this machine with your choice of screens, overlays, lenses, accessories, and digital readout systems. Please call Russ with questions, or for shipping quote 269-341-4242. Thanks for looking! Machine Features Include: 30" Crosshair Screen, Overlay/ Screen of Choice Available- Work Table 8" X 35" w/ Slots for Accessories- X" Axis Travel 12" Y" Travel Axis 9" Both Motorized w/ Variable Speed Adjustment- Power Chart Rotation 360 Degree- 10 X Magnification Lens or Specify- Projection Light Source 200 Watts, Fan Cooled- Dual Surface ... moreIllumination 150 Watts Fan Cooled- Helix Adjustment +/ 10 Degrees- Two Axis Dynamics Research Digital Readout System 2um/ 0001" Resolution- Warranty 60 Days
|
|
|
Federal , Gem , Brown & Sharp , Tumico Lot Of Dial Indicators
Federal. Gem, Brown& Sharp, Tumico Lot Of Dial Indicators Total of nine indicators. None are frozen. Four have some surface rust, all could use some service Posted with
|
|
|
Lot of 3 Scherr Tumico Inc Metal Inspection Micrometers made in USA
ANY QUESTIONS PLEASE ASK Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites
|
|
|
Scherr - Tumico 9-12" Blade Micrometer In Original Wooden Case Good Condition
Vintage Time Keepers Watches. Parts, Watch Repair, Other Interesting Collectibles Scherr- Tumico 9-12" Micrometer This is a nice micrometer in really good condition. It is used but very lightly it is in really good shape. The original wood box is marked U.S. GOVT. PROPERTY inside and on bottom outside. The case does have a little bit of dark discoloration on one edge and scratches on bottom(see pictures) Please be sure to look over pictures what you see is what you get! Thanks! Please see the pictures as this is the actual item(s) you will receive.Always feel free to ask questions before bidding.Thank you for looking at my auctions. Payment is expected within 5 days of end of auction.Please bid only if you intend to pay.I will ship to your valid Paypal address.Thank you and please feel free to look at all my auctions. Returns: We do ... morento accept returns unless you feel the item was misrepresented or not as described. I try very hard to provide accurate description and the best pictures that I can.Look at my feedback.That should tell you I want my bidders happy and to continue bidding on my items. Shipping: I combine shipping whenever possible to save the buyer money.Sometimes the size or weight of an item prevents this so if you have questions please ask otherwise I will be glad to put more than one or two watches in the same box and ship them for one price. International Bidders: SORRY WE DO NOT SHIP INTERNATIONALLY FEEDBACK: Please contact me prior to leaving any negative feedback or poor ratings and give a chance to resolve any issues you may have.I try very hard to keep all buyers happy and if given the chance I will do everything I can to resolve any misunderstanding.New users please understand how damaging a bad feedback can be and the importance of communication.I will leave you feedback but I usually will wait for a awhile and leave several at one time please be patient I will leave you positive feedback and all I ask is the same in return.
|
|
|
SCHERR TUMICO 0-1" - MICROMETER - MADE IN USA - WOOD CASE
Scherr- Tumico Multimeter in Original Wood Storage Box. 0-1" Tool is in Very Good Condition!
|
|
|
VINTAGE TOOLS, PEXTO DIVIDER, TUMICO & STARRETT MICROMETERS, SMALL WOOD HANDLED
A TOTAL OF 6 VINTAGE TOOLS IN THIS AUCTION. THEY RANGE FROM A PEXTO DIVIDER or ID GAUGE#8 TO A TUMICO 0-1 1-20 MICROMETER. A STARRETT#436 1 in- 2 in. ANOTHER OLD MICROMETER, A CRAFTSMAN 4029 STAINLESS STEEL GAUGE AND A SMALL WOOD HANDLED SCREWDRIVER. I HAVE NOT TRIED TO CLEAN THESE TOOLS UP. THEY ARE JUST AS THEY CAME FROM THE OLD GENTLEMAN'S TOOL CHEST.
|
|
|
SCHERR (?) TUMICO TUBULAR MICROMETER 10"-11" RANGE
SCHERR TUMICO TUBULAR MICROMETER SPECIFICATIONS: RANGE: About 10.5" 12" Might read mm. Not sure how to tell. Looks like it's missing some parts. From looking at empty spots in nice wood case. What is there seems to work smoothly. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $15. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144c3c96b09-0x10f-
|
|
|
Scherr Tumico 3033-12 Combination Square Level Great Shape Look!
Really nice USA tool. Good condition everything functions as it should. Posted with
|
|
|
Scherr Tumico Micrometer large barrel 1 inch travel
This has been sitting around forever and I have decided to sell it. Has the original box but I can see a set screw on the collar so I can't call it new. Otherwise it looks and feels new. Free USPS shipping in lower 48
|
|
|
VINTAGE CALIBRATION KIT WITH SCHEER-TUMICO MICROMETERS/GAUGES/STANLEY LEVEL++
VINTAGE PORTABLE CALIBRATION KIT WITH TUMICO MICROMETERS/GAUGES/STANLEY LEVEL++ PLEASE NOTE: THIS IS A FIVE DAY SALE. This is part of a very large collection that I am selling. Take a look at my other sales. This sale is for a very nice, custom assembled, calibration kit in a beautifully fitted case. This came from an elderly lady that said it belonged to her late husband who worked on"big guns" for the military before he retired. I would guess by looking at it that it could have very well been assembled for that purpose, along with most any other calibration job. The photos above and below pretty much show all of the details of the components so I won't duplicate them in words. A few details that the camera didn't catch is the size of the(3) glass grid plates which are 9 1/2" x 9 1/2" x.244" thick and the ... moreMachinists level being a 6" Stanley"Model 34" The measurements of the case is 14" x 14" x 6" and weighs a total of 23 pounds. All components are in excellent condition. Please click onto the photos below for greater detail. All items that I list are out of my personal collection and are 100% guaranteed to be as described. I take pride in my feedback. If you have any questions. Or need more photos, please ask. E-mail or call me at 541-520-2131, I live in Oregon. FREE SHIPPING TO LOWER 48 STATES, ALL OTHER CONTACT ME FOR SHIPPING COST. Click Images to Enlarge Pay-Pal Preferred or Contact Me Payment To Be Received Within One Day From End Of Auction Non U.S. Buyers Pay-Pal Only Item Will Be Shipped Within One Working Day Of Receipt Of Payment Scheduled Pick-up Or Inspection Is Always Welcome inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
|
Vintage Scherr Tumico Dial Dynamometer 3-30 Grammes w/ case - France
Up for auction is a 1960's vintage Scherr Tumico Dial Dynamometer with a range of 3-30 grammes which was made in France. The gauge comes with the original leather case with red felt lining. The Dynamometer appears to be in good working order with no signs of damage and no issues apparent. The exterior of the case has some wear along the edges. But the hinge and clasp work very well. This gauge is used for measuring force tension. Thanks for viewing my auction and please read the standard terms STANDARD TERMS- PLEASE READ 1. UNLESS OTHERWISE STATED ALL ITEMS ARE BEING SOLD AS DESCRIBED AND NOT SUBJECT TO RETURN UNLESS MISREPRESENTED BY THE SELLER 2. PLEASE E-MAIL ANY QUESTIONS BEFORE BIDDING 3. MULTIPLE PURCHASES MAY BE COMBINED TO REDUCE SHIPPING COSTS 4. BUYER MUST CONTACT ME WITHING 3 DAYS TO CONFIRM PAYMENT 5. BUYER MUST CONTACT ME ... moreWITHIN 3 DAYS OF RECEIPMENT IF THERE IS A PROBLEM WITH THE SHIPMENT OR ITEM 6. TRACKING IS INCLUDED FOR ALL SHIPMENTS 7. SINCE EBAY PLACES RESPONSIBILITY ON THE SELLER FOR LOST OR DAMAGED SHIPMENTS, INSURANCE FEES ARE INCLUDED IN THE SELLING OR SHIPPING PRICE ON ALL ITEMS. 8. NO OUT OF USA SHIPMENTS- NO EXCEPTIONS 9. FEEDBACK WILL BE LEFT WHEN THE BUYERS FEEDBACK IS RECEIVED
|
|
|
Scherr Tumico 0-100 Grammes Scale Dynamometer Force Tension Gauge
This gauge looks to be in good working order. The case will help protect it. There are a few bumps on the case. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Scherr- Tumico Inc. 1-2" OD Micrometer
Scherr-Tumico. 1-2" OD micrometer. This item has carbide faces. Ratchet knob, spindle lock and is satin chrome finish. It is graduated to read.0001" It appears to be in very good overall working condition with a very smooth spindle. There is some paint worn off of the frame. I cannot attest to calibration on this tool. I sell and ship to USA zip codes ONLY! Buyer to pay for shipping by USPS Priority Small Box Flat Rate to their USA address. Thanks for looking and good luck bidding!
|
|
|
Tubular Micrometer Co Tumico Steel Rule,Flexible,36 In Model 3836A 16ths
You are bidding on a vintage Tubular micrometer Tumico Machinist Ruler in used but good condition. No major dents or scratchs just normal wear from use. Model 3638a I accept payment via Paypal. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144e255c9f0-0x10f-
|
|
|
SCHERR-TUMICO 0-1" 12" THROAT SHEET METAL MICROMETER
SCHERR-TUMICO 0-1" 12" THROAT SHEET METAL MICROMETER. 0001 GRADS, RATCHET STOP, LOCKNUT
|
|
|
Scherr-Tumico 50-75 MM Flat Carbide Face Micrometer
This auction is for 1 Scherr-Tumico Carbide Flat Face Micrometer +50-75 MM. 0.010 mm Graduation. Flat Carbide on stems. Ratchet Thimble For Constant Force. Comes with a Mitutoyo#167-103- 75mm +/0 um. Set Plug. No Box. See pictures to view condition of micrometer. Good used condition. No International shipping. Only bid if you have a USA Zip code.
|
|
|
PAIR OF SPI & SCHERR TUMICO 0-6" .001" DIAL CALIPERS
PAIR OF SPI& SCHERR TUMICO 0-6" 001" DIAL CALIPERS Size: 0-6" Model No. 31-511-9(SPI) Readability: 001" THE SCHEER ONE IS ENGRAVED. Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
SCHERR-TUMICO CALIPER AND BOX 9"-12" W/TWO RODS & MORE 10" & 11" RODS MINNESOTA
WELCOME! WE HOPE YOU STAY AWHILE. TAKE A LOOK AT OUR OTHER ITEMS, VIEW OUR FEEDBACK. ITEM DESCRIPTION: WE ARE OFFERING A SCHERR-TUMICO MO12-831 CALIPER WITH ATTACHMENTS FROM ST. JAMES. MINN. SOMEONE HAS SCRATCHED IN SOME LETTERS AND NUMBERS ABOVE AND BELOW THE SCHERR-TUMICO-PLEASE VIEW PICTURES) BOX SHOWS ALOT OF WEAR WITH A SPLIT ON THE BOTTOM, OTHER THAN CALIPER AND PIECES SHOWING MINOR WEAR, THERE IS A SCRATCH ON BLACK TIP WHERE THE CALIPER GUAGE IS, AND ALSO WHAT IS MENTIONED ABOVE ABOUT LETTERS AND NUMBERS BEING SCRATCHED IN ON THE ITEM. TWO OR MORE PIECES ARE MISSING. NOT SURE IF ALL SPACES IN BOX ARE FOR PIECES, BUT THERE ARE THREE EMPTY SPACES IN BOX CONTENT SIDE. BOTH LATCHES ON BOX ARE WORKING-STILL A SOLID FEELING BOX. PLEASE Check out our other items! SIZE: 9"12" PAYMENT: PLEASE BID OR COMMIT TO BUY ONLY IF YOUR HAVE ... moreEVERY INTENTION OF PAYING FOR THE ITEM. IF FOR ANY REASON PURCHASER/BIDDER CAN NOT PAY THE SAME DAY OF COMMITING TO BUY OR WINNING AN AUCTION WE REQUIRE TO BE NOTIFIED OF THE CIRCUMSTANCE-IF THERE IS NO COMMUNICATION WITHIN 3 DAYS. WE RESERVE THE RIGHT TO RETRACT BID OR PURCHASE. WE ACCEPT PAYMENT THROUGH PAYPAL AND WILL SHIP EITHER THE SAME DAY OF PAYMENT OR WITHIN 24 HOURS. COMBINED SHIPPING: WE DO COMBINE SHIPPING COSTS. IF YOU WISH TO PURCHASE MORE THAN ONE ITEM. SIMPLY NOTIFY US AND WE WILL HOLD ITEM/ITEMS UP TO SEVEN DAYS AND MESSAGE YOU THROUGH EBAY AS TO THE TOTAL AMOUNT. IF YOU DESIRE TO RECEIVE A COMBINED SHIPPING DISCOUNT, PLEASE DO NOT PAY FOR ANY ITEMS UNTIL YOU RECEIVE AN INVOICE FROM US OF THE TOTAL FOR ALL PURCHASES. ITEMS WILL BE PACKAGED WELL& SHIPPED WITHIN 24 HOURS OF PAYMENT. OUR GOAL: WE HOPE TO TREAT OUR CUSTOMERS AS WE WOULD LIKE TO BE TREATED-NOT ONLY BECAUSE THIS RESULTS IN BETTER SALES AND FEEDBACK. BUT ALSO BECAUSE IT IS RIGHT AND JUST.
|
|
|
Scherr-Tumico 6-Inch Vernier Calipers L@@K No Reserve Machinist Tool Die Maker..
You are bidding on a Scherr-Tumico 6-Inch Vernier Caliper Made in Germany. This is in good condition but does have some personal markings on it. This is not a Starrett or Mitutoyo but a good tool. Buyer will pay $6.00 shipping and handling and I will combine items to save on shipping. Please look at the other items I have up for bid. Thank you.
|
|
|
Sherr-Tumico 101 Caliper
Scherr Tumico 101 series caliper- made in Germany Vintage tool in very good condition. Stainless steel construction. See photos for details. Sorry. No case included. Free standard shipping.
|
|
|
Scherr-Tumico M04-606 0-4" Micrometer
We have for sale a Scherr-Tumico M04-606 0-4" Micrometer. It comes in the wooden case with all accessories as pictured. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144ea790bbd-0x118-
|
|
|
Thread Pitch Micrometer And Accesories. Fowler, Scherr Tumico, Mitutoyo LOT
These micrometers all appear to be in good working condition. I tried my best to describe the items' conditions by the photos I took. But if you have any further questions about this item or it's condition then please feel free to message us prior to bidding. Thank you! Posted with
|
|
|
micrometer set scheer-tumico wooden case
excellent condition. Outside micrometer set, 0" 1" 0" 2" 0" 3" 0" 4" 0" 5" 0" 6" buyer pays for shipping, I use united states post office. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144ef2a0f4c-0x108-
|
|
|
Scherr Tumico Inside / Outside Calipers No 16 0170 0-6 INCHES with Case
Scherr Tumico Inside/ Outside Calipers No 16 0170 0-6 INCHES with Case EXCELLENT COSMETIC AND MECHANICAL CONDITION. I CANNOT FIND A SINGLE WARE MARK ON IT. NICE ORIGINAL CASE WITH SOME MARKS CHECK MY FEEDBACK. YOU CAN BID WITH CONFIDENCE. THANKS FOR YOUR INTEREST. DON R.
|
|
|
TUMICO outside micrometer 20 - 24 inch
This is a external micrometer manufactured by Tubular Micrometer Co. in St. James. Minn. USA.Micrometer is in very good condition and presented in original felt lined wooden box.Range is 20- 24 inches with accuracy of.001 inch.Included is 4 mastering rods, 4 stationary Anvils for ranges of 20- 21inches, 21- 22 inches, 22-23 inches, 23-24 inches. Adjusting tool included.
|
|
|
SCHEER TUMICO DIAL TEST INDICATOR
HERE IS A SCHEER TUMICO DIAL TEST INDICATOR IN VERY GOOD CONDITION 15- 0- 15 WITH CASE AND SEVERAL ADAPTERS PLUS AN EXTRA POINT I SHIP USA AND CANADA ONLY
|
|
|
Scherr Tumico USA Mandrel Outside Micrometer Set w/ Case 2-6" In Wooden Case
SCHERR TUMICO 2-6" WITH ATTACHMENTS IN WOODEN BOX NOT SURE WHEN THE LAST CALIBRATION DATE WAS'TIMOTHY TEMPLE 9-16' IS WRITTEN ON THE INSIDE Thank you for viewing our listing. Please feel free to browse our other listings to see what else we may have available. Laptops: We do NOT warranty the laptop battery condition. Functionality or longevity. If you have any questions. Please send us a message. We will try and get back to you as soon as we are able to. Sorry. We do not offer a Buy It Now price for our items. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. We will ship to US(Lower 48) and Canada ONLY. No overseas shipping at all. We will attempt to ship out every order as quickly as possible after the payment is received. In most cases. ... moreThis results in your product being shipped on the next business day(Monday thru Friday) However, on occasion we may receive a large number of orders in a short period of time which may slightly delay shipping your item(up to another business day) We do not ship to PO Boxes. We offer a signature confirmation on any order +/= $125.00 automatically. We only offer a refund of ORIGINAL purchase price and shipping. BUYER pays return shipping fees for a return. Inv# 11606-6. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144f64393fb-0x115-
|
|
|
Tumico Tubular Inside Large Micrometer Set w/ Case 8pc MADE IN THE USA
Tumico Tubular Inside Large Micrometer Set USED; VERY GOOD CONDITION; NO PERSONAL MARKINGS MADE IN USA COMES AS PICTURED STOCK# 1-636 Specifications: Sizes: 10" 10" 6-7" 5" 4" 3" 2" 1" 8-Piece Graduation: 0.001" hardened and ground radius contacts Solid Steel Construction Wooden Case Spanner Wrench_ T-84-CRAFTSMAN-SILVER_3/24/2014
|
|
|
TUMICO INSIDE MICROMTER 1.5" TO 8"
THIS TUMICO INSIDE MEASURING INSTRUMENT COMES WITH 7 INTERCHANGEABLE MEASURING RODS THAT ADAPT TO A MICROMETER HEAD WITH A RANGE OF.500" THE MICROMETER CAN BE MOUNTED ON THE 91/2" LONG HANDLE INCLUDED IN THE WOODEN CASE.
|
|
|
SCHERR TUMICO 1000 GRAMMES GAGE
SCHERR TUMICO 1000 GRAMMES GAGE. SEE PICS. LY-O7
|
|
|
Vintage SCHERR TUMICO 10X G.S.C COMPARATOR LENS
Vintage SCHERR TUMICO 10X G.S.C COMPARATOR LENS. It's 3 1/8" tall. You will receive the item you see here.
|
|