|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Holland, United States CAPACITY 4 TON. AREA OF BED 16" RL X 4" FB. HOLE IN BED 11-1/2" X 8" FB. SHUT HEIGHT, SDAU, OVER BED 11-1/2".
Buy It Now
Condition: Used Location: Crestline, United States Denison Hydroilics Multipress. 120 Volt AC. Series 25-3459-W. Thumb Touch Button Operation. USA Sales Only.
Buy It Now
Condition: Used Location: Waukesha, United States MODEL.. HYDROILIC PRESS. MANUFACTURER. DENISON. STROKE.. 17". L x W.. 55" x 60". TONNAGE. 25. SERIAL NUMBER.
Buy It Now
Condition: Used Location: Warren, United States 8 Ton DENISON MULTIPRESS C-Frame Type Hydraulic Press- Used- AM10844 Model: S087MC Serial: 16403 Specifications: Max Capacity: 8 Tons Cylinder Bore: 3-3/4” ... moreThroat: 7” Daylight: 18” Stroke: 12” 7.5 HP Integrated Motor Includes: Stroke Length Adjustment Light Curtains 2 Hand Cycle Start Used Two Post Die Set Mounted in Machine– See Photos Machine Base 2 20 Volt. 3 PH, 60 HZ Electrics This machine is on our floor available immediately. Subject to prior sale DISCOUNTED SYSTEM PRICE | AS PICTURED | LOADED ON TRUCK | FOB CLEVELAND. OHIO Do not hesitate to contact us with any questions and we look forward to doing business with you. A M INDUSTRIAL- EBAY DEPARTMENT- 216-433-7171– Dust Extraction…Fabricating Machinery…Sawing& Cutoff…Tube& Pipe… New Arrivals Daily! Conditions: Used items sold hereunder are neither designed nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties. Expressed or implied, of any kind including safety, condition, or quality. Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable governmental laws or requirements. It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale. All sales are F.O.B. Cleveland. Ohio unless otherwise specified.
Buy It Now
Condition: Used Location: Waukesha, United States MANUFACTURER. DENISON MULTIPRESS. STROKE (MAXIMUM). CAPACITY.. 6 TON. DUAL PALM BUTTON OPERATION. MAIN PUMP MOTOR. TANK CAPACITY. 10 GAL. EQUIPPED WITH.
Buy It Now
Condition: Used Location: Toledo, United States Make..: Denison. Bed Size.: 28.5" x 18".
Buy It Now
Condition: Used Location: Middlebury, United States Size: Length: 23 in. Width: 20 in. Height: 29 in. Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Model: ... moreModel A. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Johnson City, United States P/N DF6C61C18A59A80A01. 6 Ton Denison Hydraulic MultiPress.
Buy It Now
Condition: Used Location: Millersburg, United States Cantilever Racking. Lift Tables. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving ... moremarketplace. Information and Support. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Condition: Used Location: El Paso, United States Unit tested OK with cylinder pneumatic valve actuated directly with external air pressure. Motor: 220/440V 3 Phase.
Buy It Now
Condition: Used Location: Rochester, United States Make: Denison. Stroke: 10". Type: Hydraulic Press. Cylinder Bore: 2.75". Motor HP: 5. make Supersized seem small. Motor RPM: 1800. Eletric: 460V, 60 Hz, ... more3 Phase.
Buy It Now
Condition: Used Location: Millersburg, United States Cantilever Racking. 5-1/2" max stroke. Country of Manufacture USA. 10x16" table top. LET'S STAY IN TOUCH. Information and Support. Part Number DG6C01A59S01C18. ... more11" max clearance.
Buy It Now
Condition: Used Location: El Paso, United States Hydraulic pump and cylinder not tested. Only motor tested good. Good physical condition. No oil available/included.
Buy It Now
$325.00 Shipping Condition: Used Location: Waukesha, United States As pictured. It does leak oil, just a bit, adding paper towel to unit in spot I’m pointing at is enough to control the issue. Great little unit. Ships ... morefreight or pickup in waukesha wi. Shipping is to commercial w forklift. May cost more to residential. Daylight 8.234Max psi 1000Wupa-2r model
Buy It Now
Condition: Used Location: Millersburg, United States Cantilever Racking. 12-3/16 max stroke. Country of Manufacture USA. 14x22" table top. LET'S STAY IN TOUCH. 16" opening max. Information and Support. Part ... moreNumber FG8C08C23A68.
Buy It Now
Condition: Used Location: Millersburg, United States Cantilever Racking. 5-7/8" max stroke. Country of Manufacture USA. 12x17" table top. LET'S STAY IN TOUCH. Information and Support. Part Number DB4C09C20C62A59A46C35. ... more15" max clearance.
Buy It Now
Condition: Used Location: Painesville, United States 6 TON DENISON"C"FRAME BENCH-TYPE HYDRAULIC PRESS Serial No 31725. Model WR65L-C44FS1 EQUIPPED WITH: Dual Palm Buttons Bench-Type Machine Mount ... moreCATALOGUE SPECIFICATIONS: Tonnage Capacity. 6 TON. Stroke Length. Adjustable. 12" Daylight. Maximum. 16" Throat Depth. 8" Bed Area. L-R x F-B. 18" x 11" Maximum PSI. 1450 PSI. Hydraulic Reservoir Capacity. Gallons. 10 GALLON. Hydraulic Motor. Horsepower. 5 HP. Electrical Requirements. 220/440/3/60. Overall Dimensions. W x D. 28" x 36" Weight. Approximately. 1100 LBS. PRICE: F.O.B. OUR WAREHOUSE. $1.950.00. All machine/equipment subject to prior sell. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f8b2ddb9f-0xf3-
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. . 50 TON. STROKE OF RAM. . 6". HORSEPOWER HYDRAULIC MOTOR. 1-1/2 230/460/3/60. MODEL. . H 50.
Buy It Now
Condition: Used Location: Middlebury, United States Model: 8C01A71. Country of Manufacture: N/A. Size: Length: 47 in. Width: 37 in. Height: 80 in. Unless otherwise specifically agreed to in writing by. ... more23-1/2" x15-3/4" Table. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. STROKE. 15". RAM SPEED - PRESSING. 250 IPM. BED AREA. . SLOT IN BED. . 9" W X 14" L. FLOOR TO BED. 32".
Buy It Now
Condition: Used Location: Holland, United States CAPACITY 6 TON. STROKE 12". RAM SPEED - PRESSING 100 IPM. DUAL PALM BUTTONS YES. BED AREA 17" X 10-1/2". D-SLOT IN BED 4-7/8" W X 8" L. FLOOR TO BED 36". ... morePUMP CAPACITY 7 GPM.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 10231420014. Model Number: S085MC20IESD267D210. Manufacturer: DENISON. Capacity: 7.5 HP/8 TON. Item is subject to prior sale . Less-Than-Truck ... more(LTL) Freight Handling Policy. Diversion of any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Clover, United States DEN I SON HYDRAULIC MULTIPRESS. 10" STROKE. If your item is received in a different condition than stated (DOA, not working properly etc. NEW, old inventory. ... more• Freight, etc. • Local pick up. REMANUFACTURED, rebuilt. ).
Buy It Now
Condition: Used Location: Rochester, United States Make: Denison. Stroke: 10". Type: Hydraulic Press. Cylinder Bore: 2.75". Motor HP: 5. Motor RPM: 1800. Eletric: 460V, 60 Hz, 3 Phase. Tank Capacity: 10 ... moreGallon.
Buy It Now
Condition: For parts or not working Location: Bridgeport, United States Here is a used Denison 8 ton multi press.This machine came from a business that went under I have no prio history when it came in we got it to come on ... moreand work everthing seemed to work like it should however the ram wouldnt go back up on its on power we had to manually push the ram back up.I really dont know anything about these machines feel free to email or give me a call to view or try it out Kevin-770-656-5560
Buy It Now
Condition: Used Location: Waukesha, United States MANUFACTURER. DENISON MULTIPRESS. STROKE (MAXIMUM). CAPACITY.. 6 TON. MAIN PUMP MOTOR. TANK CAPACITY. 10 GAL. EQUIPPED WITH.
Buy It Now
Condition: Used Location: Waukesha, United States MANUFACTURER. DENISON MULTIPRESS. STROKE (MAXIMUM). CAPACITY.. 6 TON. DUAL PALM BUTTON OPERATION. MAIN PUMP MOTOR. TANK CAPACITY. 10 GAL. EQUIPPED WITH.
Buy It Now
Condition: Used Location: Stone Mountain, United States (Model: WR65L. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Stroke: 12″. Cause ... moreof Action?). Press Brakes. We also reserve the right to correct any stenographic errors.
Buy It Now
Condition: Used Location: Middlebury, United States Model: Multipress HydrOILich. Tested good, 208V windings in motor were eliminated, 480V Only 3Ph 3Hp. Country of Manufacture: United States. Unless otherwise ... morespecifically agreed to in writing by. 16" x 11" bed, 11" throat.
Buy It Now
Condition: Used Location: Middlebury, United States Model: MDFGC201C18A59. Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Size: Length: 37 in. Width: 30 in. ... moreHeight: 67 in. To get a freight quote we will need to know the following.
Buy It Now
Condition: Used Location: Scottsburg, United States SPECIFICATIONS Tonnage, 15, Ram Stroke, 0" 10" Daylight, 18" Bed Size(L-R. F-B) 17" x 11" Ram Size(L-R. F-B) 4" x 2 3/4" ... moreRam Speeds: Approach, 630 IPM, Forming, 280 IPM, Return, 500 IPM, Throat Depth, 12" Dimensions(L x W x H) 60" x 35" x 86" Weight, 4.000 Lbs.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 04240380006. Model Number: R045LC204D266D210A12. Manufacturer: DENISON. Capacity: 4 TONS. (c) Truckload and Partial Truckload: HGR can ... moreassist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Seller refurbished Location: Mount Juliet, United States Quote# 23709. 4 TON DENISON/ABEX MULTIPRESS C-FRAME BENCH-TYPE HYDRAULIC PRESS New 1975. Serial No 23432, Model WR045LC264FSD366CE212361003034 EQUIPPED ... moreWITH: 10 Gallon Reservoir Capacity Cycle/Inch Controls Pressure Gauge CATALOGUE SPECIFICATIONS: Tonnage Capacity. 4 TONS. Stroke Length. Adjustable. 12" Daylight. Maximum. 16" Cylinder Bore Diameter. 2.5" Ram Diameter. 1.625" Ram Speed. Rapid Approach. 784 IPM. Ram Speed. Pressing. 284 IPM. Ram Speed. Rapid Return. 862 IPM. Throat Depth. 7.5" Operating Pressure. 2000 PSI. Motor. Horsepower. 5 HP. Weight Approximately. 1100 LBS. PRICE: F.O.B. OUR WAREHOUSE. $950.00. All machine/equipment subject to prior sell. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f8b2ddcab-0x103-
Buy It Now
Condition: Used Location: Ronkonkoma, United States Quote# 24506. 2 TON DENISON"C"FRAME HYDRAULIC PRESS EQUIPPED WITH: 21" Denison 6-Station Indexing Table(Model A46. S/N S0257710) 10 Gallon ... moreHydraulic Reservoir CATALOGUE SPECIFICATIONS: Tonnage Capacity. 2 TON. Stroke Length. 6" Daylight. Maximum. 12" Bed Area. L-R x F-B. 16" x 10" Throat Depth. 6" Hydraulic Reservoir Capacity. Gallons. 10 GALLON. Weight. Approximately. 1500 LBS. NOTE: We Could Not Find The Actual Model And Serial Number On This Machine However Previous Owner Advises This Is A 2 Ton Machine. PRICE: F.O.B. OUR WAREHOUSE. $950.00. All machine/equipment subject to prior sell.
Buy It Now
Condition: Used Location: Hugo, United States Denison 35 Ton Hydraulic Multipress. Capacity: 35 Ton. Also machines can be inspected under power here at our facility in Hugo, MN 55038. We'll do our ... morebest to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo, MN 55038.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 04240160001. Model Number: R043LC209SSD276JD266A12TT106RS219. Manufacturer: DENISON. Capacity: 4 TON. See details below. Larger pallet ... moresizes cost more. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Cincinnati, United States Series "MULTIPRESS". Tonnage Capacity 50 TON. Adjustable Stroke. Stroke Length Adjustable 15". Hydraulic Motor, Horsepower 30 HP. Ram Speed, Pressing ... more166 IPM. Electrical System 230-460/3/60. Bed Area, L-R x F-B 31" x 20".
Buy It Now
Condition: Used Location: Pawtucket, United States Denison Model #DF6CO4C0OA59A3. Gold Machinery Group. Max Stroke 6". We’re conveniently located on the East Coast between Boston and New York. Adjustable ... morestroke. Motor pump assembly. Pressure gauge. Table size: LR 16 1/2" x FB 11" x 37" height.
Buy It Now
Condition: Used Location: Harrison, United States 8 TON DENISON MULTIPRESS HYD. Pressing 136 ipm. - Press mounted palm buttons. - Adjustable pressure valve. Motor. . 10 HP. Bed area. . 18" LR x 11" FB. ... moreFOB: GRAND RAPIDS, MI.
Buy It Now
Condition: For parts or not working Location: El Paso, United States Here is a used Denison 8 ton multi press.This machine came from a business that went under I have no prio history when it came in we got it to come on ... moreand work everthing seemed to work like it should however the ram wouldnt go back up on its on power we had to manually push the ram back up.I really dont know anything about these machines feel free to email or give me a call to view or try it out Kevin-770-656-5560
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. 50 TON. SPEED PRESSING. 145 IPM. OPEN HEIGHT. . 24" OVER BED. ROTARY TABLE HEIGHT ABOVE BED. 12". FLOOR TO BED. . 32".
Buy It Now
Condition: Used Location: Holland, United States YODER #75941. YODER MACHINERY SALES. 125 TON DENISON HYDRAULIC PRESS STROKE. . 0" TO 15". CAPACITY. 125 TONS. MAIN MOTOR HORSEPOWER. 10. FLOOR TO BED. ... more. 33".
Buy It Now
Condition: Used Location: Harrison, United States MODEL WR45LC304F51SO95316D S/N 27519 NEW 1978. 4 TON DENISON HYDRAULIC MULTI-PRESS. STROKE. . 12". MOTOR SPECS: 5 HP, 3/60/230/440. Machine Location:HARRISON, ... moreNJ.
Buy It Now
Condition: Used Location: Waukesha, United States MANUFACTURER. DENISON MULTIPRESS. STROKE (MAXIMUM). CAPACITY.. 6 TON. DUAL PALM BUTTON OPERATION. MAIN PUMP MOTOR. TANK CAPACITY. 10 GAL. EQUIPPED WITH.
Buy It Now
Condition: Used Location: Harrison, United States MODEL W4R37M C404FSD S/N M5155 NEW 2004. Stroke, maximum. . 0 - 12 Maximum. 235 ipm pressing. - dual palm push buttons. - pressure gauge. 7 1/2 hp 230/460V. ... moreBed area. . 18" LR x 12" FB.
Buy It Now
Condition: Used Location: Harrison, United States MODEL FN 50-30H S/N 26056 Year 1978. Stroke. 15". 0 - 166 ipm - pressing (variable). - Variable pressing speeds. - Press mounted palm buttons with E-stop. ... more- Digital parts counter.
Buy It Now
Condition: Used Location: Toledo, United States Capacity: 35 Ton. -33.5" from Floor to top of Bed. -Bed Size: 30" L-R x 20" F-B. -Electrical Schematics Included. 80 Gallon Hydraulic Reservoir. 30 HP ... moreAC Motor, 1765 RPM, 230/460 V. -Self-Contained Hydraulic Power Unit.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. 50 TON. 30 HORSEPOWER. AREA OF BED. 19" X 30". AREA OF BED & RAM PLATES. 32" X 25" X 2". SLOT IN BED. 9" X 12". DUAL ... moreHAND LEVER.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. STROKE. . 15". BED AREA. . 30" X 19-1/2". We load for free. DIAMTER OF ROTARY TABLE 21". MOTOR. . 30 HORSEPOWER.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. 8 TON. STROKE OF RAM. 12". DUAL PALM LEVERS. YES. MOTOR, HORSEPOWER. 7-1/2. AREA OF BED. 18" X 12". SERIAL. . 21484.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. . 35 TON. RAM SPEED - PRESSING. 250 IPM. HYDRAULIC PUMP G.P.M. MOTOR HORSEPOWER. . CLOSED HEIGHT. . 12".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. . 8 TON. STROKE. . 12". DUAL PALM BUTTONS. . YES. 7-1/2 HORSEPOWER. BED AREA. . 22" X 14".
Buy It Now
Condition: Used Location: Middletown, United States Denison HydrOilics Multipress. 8 Ton Capacity. No Warranty.
Buy It Now
Condition: Used Location: Harrison, United States Dual palm buttons on remote operator station. Press adj. 115 IPM. Motor. . 30 HP. Capacity. . 75 tons. Play YouTube Video of this Item. Weight 12,500 ... morelbs.
Buy It Now
Condition: Used Location: Cedarburg, United States MODEL #: T100LA72S210. Stroke: 12". Palm Buttons. 10 Hp Motor: 208-220/440 Volt, 3 ph, 60 Hz, 1800 RPM. Currently wired for 440V. WE'LL DO OURVERY BEST ... moreTO MAKE IT SO! GPM: 13 gallons. Throat: 10".
Buy It Now
Condition: Used Location: Roanoke, United States Quote# 23709. 4 TON DENISON/ABEX MULTIPRESS C-FRAME BENCH-TYPE HYDRAULIC PRESS New 1975. Serial No 23432, Model WR045LC264FSD366CE212361003034 EQUIPPED ... moreWITH: 10 Gallon Reservoir Capacity Cycle/Inch Controls Pressure Gauge CATALOGUE SPECIFICATIONS: Tonnage Capacity. 4 TONS. Stroke Length. Adjustable. 12" Daylight. Maximum. 16" Cylinder Bore Diameter. 2.5" Ram Diameter. 1.625" Ram Speed. Rapid Approach. 784 IPM. Ram Speed. Pressing. 284 IPM. Ram Speed. Rapid Return. 862 IPM. Throat Depth. 7.5" Operating Pressure. 2000 PSI. Motor. Horsepower. 5 HP. Weight Approximately. 1100 LBS. PRICE: F.O.B. OUR WAREHOUSE. $950.00. All machine/equipment subject to prior sell. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f8b2ddcab-0x103-
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. . 10 TON. STROKE OF RAM. . 12". HYDRAULIC MOTOR, HORSEPOWER. DUAL PALM LEVERS. . BOLSTER PLATE. . 22" X 18" X 1".
Buy It Now
Condition: Used Location: Cedarburg, United States MRS-0828 Safety Light Curtains Stroke: 21". WE'LL DO OUR VERY BEST TO MAKE IT SO! Throat: 12". 830mm Protected height. M Series #BS6491-1984.
Buy It Now
Condition: Used Location: Holly, United States T6CC 017 010 5R 10 C110. Related Ideal Reference Numbers: 106579, 124541. 400 Ton Cincinnati Milacron Injection Molding Machine. It does not include manuals ... moreor printed materials. Removing or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Holly, United States Model: T6DCC 050 020 010 2R1S A101. Related Ideal Reference Numbers: 130983. 500 Ton JSW Injection Molding Machine. It does not include manuals or printed ... morematerials. Removing or tampering with our security seals will automatically void the warranty.
|
|
|
|
8 TON DENISON HYDRAULIC PRESS - MULTIPRESS
Here is a used Denison 8 ton multi press.This machine came from a business that went under I have no prio history when it came in we got it to come on and work everthing seemed to work like it should however the ram wouldnt go back up on its on power we had to manually push the ram back up.I really dont know anything about these machines feel free to email or give me a call to view or try it out Kevin-770-656-5560
|
|
|
DENISON 8 TON PRESS FG8C09 W/ 12" STROKE & ROTARY TABLE
DENISON 8 TON PRESS FG8C09 W/ 12" STROKE& ROTARY TABLE Prev Stop Play Next SquareTrade © AP6.0 DENISON 8 TON PRESS FG8C09 W/ 12" STROKE& ROTARY TABLE You are bidding on a Denison 8 Ton Punch Press. Model: FG8C09C23C42A This is a very nice machine in excellent condition and it is fully guaranteed. 12" Stroke 18" Daylight Opening 8" Throat Depth Equipped with a 6 Station 21" Rotary Index Table 7-1/2 HP Motor. 3 Phase, 220/440 Volts We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us at Dock@dockhardware.com or call 1-800-826-3433 9 to 5 EST. NO RESERVE Please click here to see my other auctions.
|
|
|
DENISON 8 Ton MULTIPRESS C Frame Hydraulic Straightening Press Model M3P-8TR-PR
Up for sale is thisMultipress 8 Ton press which was removed from a working environment and has been stored(inside) for about 5 years. When disconnected. This press was working fine. However, I have no means of connecting and testing this machine. This press is in great shape with no missing or broken parts. More information on this press can be obtained at www.multipress.com. I was told that the M3P models were superseded by the M5P models. This is supposed to be an 8 TON press but please verify this for yourself. Some additional information: Model No. M3P-8TR-PR Serial No. M-4019-3 Voltage- 480 Volts(currently wired for this voltage) Advance IPM- 440 Press IPM- 165 Return IPM- 270 Daylight(in. 18 Stroke(in. 12 Throat Depth(in. 7 Bed Size- 14" X 11.5" Dual Palm Buttons Cylinder Bore Diameter- 4" Cylinder Rod Diameter- 2" ... moreMaximum Operating Pressure- 1930 psi Press Dimensions- 55" high by 28" width(approx. Total height = 80" with stand) Please note that I have tried to describe this machine to the best of my ability. This presswas working in a"light duty" environment and looks in greatshape. I have no use for this machine and can not continue to store it. I have listed this machine for pick up only but will be more than willing to assist the buyer with any shipping arrangements. The machine is currently bolted to a pallet and I can load it for no additional charge. If the machine has to be crated or any additional shipping preparation has to be done. This will come with an additional charge depending on the buyer's requirements. Thanks and please bidwith confidence.
|
|
|
Denison 25 Ton Hydraulic Press 14" Stroke, Palm Buttons
Denison 25 Ton Hydraulic Press With 50 ton frame. 20" x 20" Bed with a 4.75" x 12" slot, 16" x 22" x 1.5" Bolster plate with 5" round hole, 14" Stroke, 12" x 14" x 2" Flanged ram, Palm buttons, 15hp 220/440v 3ph. Video- Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship ... morethe item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Denison 12 Ton Multi Press Model T127LC
Denison 12 Ton Multi Press Model T127LC. S# 24294, 24" Stroke, Throat 10" Ram Dia 2.75" Table size 18" x 22" Stroke control, 6" x 12" Slot in bed, 7.5hp 220/440v 3ph Video- Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will ... morenot leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
12 TON DENISON "T127MC204FSD" MULTIPRESS "C"-FRAME HYDRAULIC PRESS - #26295
Quote# 26295. 12 TON DENISON MULTIPRESS"C" FRAME HYDRAULIC PRESS Serial No 18870. Model T127MC204FSD268D210JMC255A72 EQUIPPED WITH: 30" Maximum Daylight 20 Gallon Hydraulic System Removeable Work Fixture CATALOGUE SPECIFICATIONS: Tonnage Capacity. 12 TON. Stroke Length. 12" Daylight. Maximum. 30" Throat Depth. 10" Main Cylinder Diameter. 4" Ram Diameter. 2.75" Bed Area. L-R x F-B. 22" x 18" Ram Speed. Closing. 315 IPM. Ram Speed. Pressing. 125 IPM. Ram Speed. Rapid Return. 280 IPM. Maximum Pressure. 1910 PSI. Motor. Horsepower. 7.5 HP. Electrical System. 440/3/60. Weight. Approximately. 5000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $3.950.00. All Machine/Equipment subject to prior sell.
|
|
|
6 TON DENISON "C"-FRAME "WR65L-C44FS1" BENCH-TYPE HYDRAULIC PRESS - #25234
6 TON DENISON"C"FRAME BENCH-TYPE HYDRAULIC PRESS Serial No 31725. Model WR65L-C44FS1 EQUIPPED WITH: Dual Palm Buttons Bench-Type Machine Mount CATALOGUE SPECIFICATIONS: Tonnage Capacity. 6 TON. Stroke Length. Adjustable. 12" Daylight. Maximum. 16" Throat Depth. 8" Bed Area. L-R x F-B. 18" x 11" Maximum PSI. 1450 PSI. Hydraulic Reservoir Capacity. Gallons. 10 GALLON. Hydraulic Motor. Horsepower. 5 HP. Electrical Requirements. 220/440/3/60. Overall Dimensions. W x D. 28" x 36" Weight. Approximately. 1100 LBS. PRICE: F.O.B. OUR WAREHOUSE. $1.950.00. All machine/equipment subject to prior sell. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f8b2ddb9f-0xf3-
|
|
|
4 TON DENISON "C"-FRAME "RO45MC261D266C218A59" BENCH-TYPE HYDRAULIC PRESS -#T318
Quote# T318. 4 TON DENISON"C"FRAME BENCH-TYPE HYDRAULIC PRESS New 1961. Serial No 16767, Model RO45MC261D266C218A59, Series"BENCH-TYPE" EQUIPPED WITH: Bench-Type Machine Mount CATALOGUE SPECIFICATIONS: Tonnage Capacity. 4 TON. Stroke Length. 10" Daylight. Maximum. 16" Cylinder Bore Diameter. 2.25" Bed Area. L-R x F-B. 18.5" x 10.5" Throat Depth. 6" Ram Speed. Closing. 620 IPM. Ram Speed. Pressing. 245 IPM. Ram Speed. Return. 680 IPM. Hydraulic Reservoir Capacity. Gallons. 10 GALLON. Hydraulic Pump. Gallons per Minute. 6.3 GPM. Hydraulic System Pressure. Maximum. 2000 PSI. Hydraulic Motor. Horsepower. 5 HP. Weight. Approximately. 1100 LBS. PRICE: F.O.B. OUR WAREHOUSE. $950.00. All machine/equipment subject to prior sell.
|
|
|
2 TON DENISON "C"-FRAME HYDRAULIC PRESS - #24506
Quote# 24506. 2 TON DENISON"C"FRAME HYDRAULIC PRESS EQUIPPED WITH: 21" Denison 6-Station Indexing Table(Model A46. S/N S0257710) 10 Gallon Hydraulic Reservoir CATALOGUE SPECIFICATIONS: Tonnage Capacity. 2 TON. Stroke Length. 6" Daylight. Maximum. 12" Bed Area. L-R x F-B. 16" x 10" Throat Depth. 6" Hydraulic Reservoir Capacity. Gallons. 10 GALLON. Weight. Approximately. 1500 LBS. NOTE: We Could Not Find The Actual Model And Serial Number On This Machine However Previous Owner Advises This Is A 2 Ton Machine. PRICE: F.O.B. OUR WAREHOUSE. $950.00. All machine/equipment subject to prior sell.
|
|
|
DENISON 6 TON PRESS WILL SHIP
FOR SALE: DENISON 6 TON PRESS MODEL# DL6C01C17S01A59 CURRENTLY WIRED 440 VOLTS CONDITION'GOOD. FUNCTIONAL' BUYER IS RESPONSIBLE FOR LOCAL PICK UP OR FREIGHT ARRANGEMENTS WITHIN FIVE DAYS. WE WILL HELP SET UP FREIGHT WE EXCEPT PAYPAL ONLY PLEASE COMPLETE PAYMENT WITHIN THREE DAYS OF AUCTION END
|
|
|
Denison Multi-Press, 8 Ton Hydraulic Gap Frame Press
8 Ton Dension Muliti-Press Gap Frame Press. Hydraulic Press, with 7.5 HP Motor Specification Description Tonnage, 8 TON, Bed Area, 18" x 12" Stroke, 12" Throat, 8" Weight. Approx. 1.000 Lbs. Equipped With: Dual Palm Buttons with emergency Reversal. Cycle& Inch Selector, Pressure Gauge NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
|
|
|
DENISON hydraulic Multipress Model A punch Press 2 ton finger safety switches
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned DENISON MODEL A 2-TON MULTIPRESS W/TABLE Model A 2 s/n 2 ton 110v finger safety switches 650# skidded Ideal for any shop. Item is in working order. Description, DENISON HYDRAULIC PRESS 2TON CAPACITY MODEL: A 2 specifications There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact ... morewithin 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. I always return feedback so leave some good comments so I can do the same for you. Please see my other auction. You never know what bargains you will find! Thanks much and happy bidding Shipping Shipping paid by buyer. USA ONLY. I combine shipping where possible so buy all you like. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees
|
|
|
Denison Model"A",1-Ton Hydraulic MultiPress,Index Table INV=13339
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Denison Model"A" Series 25-3459-W Hydraulic Multi- Press, Serial No.303. 1-Ton rated pressing capacity. 10" L- R) X 7-1/2" F- B) Area of machine's table. 10" Diameter hydraulically actuated index table. 1-1/8" Diameter of machine ram. 4-1/2" Depth of throat. Magnetek 3/4 HP 115/208/230V AC motor. Comes with electric foot switch. This Dension Multi-Press is currently sitting on a steel frame table. NOTE: The table's legs are in NOT in good condition. No foreign bidders. No exceptions. NO CANADIANS. This item is safety critical. The responsibility for ensuring safety of this item and OSHA compliance lies solely with the buyer. The buyer needs to obtain a proper safety evaluation of this item from a qualified specialist. Safety is application ... morespecific and the seller is unable to make a safety determination for this item. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping with me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder co
|
|
|
20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS Ref# 151237 iammdna XCFRPR 20 TON DENISON HYDRAULIC PRESS MODEL FH2020HC404FSD S/N 32490 NEW 1988 RATED CAPACITY. 20 TONS. STROKE. 12" ... moreTHROAT. 10" DAYLIGHT. 21" BED SIZE. 26" X 17" RAMS SPEEDS.CLOSING) 550 IPM. PRESSING) 250 IPM. RETURN) 600 IPM CYLINDER BORE. 4-1/2" MOTOR HP. 20 RESERVOIR. 55 GALLONS. MAX OPERATING PRESSURE. 2516 PSI. EQUIPPED WITH: DUAL PALM BUTTONS. HANDWHEEL FOR INCHING. CURRENTLY WIRED AT 460 VOLT/ 3 PHASE DIMENIONS: 33" X 46" X 85" HIGH. WEIGHT: 3.200 LBS. Machine Location: HARRISON. NJ Click Here For More Denison Machines Click Here For More Presses& Pressroom- HYDRAULIC C-FRAME PRESSES(s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971
|
|
|
*8 TON* DENISON HYDROILICS MULTIPRESS MODEL S087LC261D267C229A59S206
8 TON* DENISON HYDROILICS MULTIPRESS MODEL S087LC261D267C229A59S206 Click Images to Enlarge *8 TON* DENISON HYDROILICS MULTIPRESS MODEL S087LC261D267C229A59S206 SERIAL NO: 17089 CYLINDER BORE: 3.25 STROKE: 12 MOTOR HP: 7.5 DAYLIGHT: 18 THROAT: 7 RAM DIAMETER: 2.25 1800 MOTOR 220 VOLTS 60 HZ TANK CAPACITY: 20 MAX PSI 1.930 PUMP GPM: 11 MEASURES: 24" x 39" x 77" PLEASE CALL FOR WEIGHT LOADING FEE: $30 COMES AS SHOWN IN PHOTOS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges ... moreon the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our cu
|
|
|
DENISON 8 TON HYDROILIC MULTI PRESS MODEL FG8 04D10506
DENISON 8 TON HYDROILIC MULTI PRESS MODEL FG8 04D10506 Click Images to Enlarge DENISON 8 TON HYDROILIC MULTI PRESS MODEL: FG8 04D10506 SERIAL NO: 12438 7-1/2 HP 220/440 VOLTS 1745 RPM 3 PHASE 19.4 AMPS THROAT: 8-1/2" 22" x 14" TABLE MEASURES: 55" x 41" x 83" PLEASE CALL FOR WEIGHT LOADING FEE: $30 ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services ... moreplease contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground
|
|
|
Denison Multipress Floor model 4 ton hydraulic Press.
Denison Multipress Floor model 4 ton hydraulic Press. Nice condition. Selling as You see it. Local pickup. Free loading on Buyers Truck from Pa zip code 18966. Buyer pays all shipping costs.
|
|
|
12 Ton DENISON WT120M HYDRAULIC PRESS
For sale is a Densison Multipress Inc. Model WT 120 M. its 480 V at 60 Hz. Max. operating pressure is 1910 PSI. It has a 28 gal. hydraulic oil reservoir. Item is heavy and should be a local pick up only but can help with freight and loading arrangements. Used in the electronics industry under a strict preventative maintenance program. Used very little.
|
|
|
#DG6 DENISON 6 Ton C-Frame Hydraulic Press (New 1956)
Preowned 6 Ton DENISON C-Frame Hydraulic Press. Model DG6C61C18A59A80A12AO, S/N 13230(New 1956) Capacity Maximum ram stroke Daylight over bed Ram diameter Cylinder bore Throat depth Table area Maximum P.S.I. 6 ton 6" 16" 2" 3-1/4" 7" 11" F-B x 16" L-R 1.450 Equipped With Dual handlever control of ram actuation Welded all steel frame Ram pressure adjustment Non-rotating ram guide Tonnage gauge Stroke limit collar for adjustment of ram depth 5 H.P. 3/60/220-440 volt hydraulic pump motor with push button starter& electrical disconnect switch Machine is wired for 220 volt operation. Approximate Weight: 2.000 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
DENISON 8 TON HYDROILIC HYDRAULIC MULTI PRESS MODEL FG8 04D10506
Call Us Today! 626.330.4647| DENISON 8 TON HYDROILIC HYDRAULIC MULTI PRESS MODEL FG8 04D10506 MODEL: FG8 04D10506 SERIAL NO: 12438 7-1/2 HP 220/440 VOLTS 1745 RPM 3 PHASE 19.4 AMPS THROAT: 8-1/2" 22" x 14" TABLE MEASURES: 55" x 41" x 83" APPROXIMATE WEIGHT: 8.000 LBS Copyright 2014 1 Machinery Sales.com | All Rights Reserved, Descriptions Please read descriptions carefully. We list any features, specifications and details we know and/or research. If you don’t see the information you need or notice any discrepancy; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Payments We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not ... morebeen received. Item(s) will be relisted after few days and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. Storage We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. Feedback Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. Return Policy We accept returns for all our items listed as working. Items listed in“AS IS” condition or“For Parts or Repair” have no warranty. Read our descriptions carefully. We give 14 days to Contact Us and return the item. Refund can be process in the form of exchange. Merchandise,
|
|
|
*8 TON* DENISON HYDROILICS MULTIPRESS S087LC261D267C229A59S206 HYDRAULIC PRESS
Call Us Today! 626.330.4647|*8 TON* DENISON HYDROILICS MULTIPRESS S087LC261D267C229A59S206 HYDRAULIC PRESS, MODEL S087LC261D267C229A59S206 SERIAL NO: 17089 CYLINDER BORE: 3.25 STROKE: 12 MOTOR HP: 7.5 DAYLIGHT: 18 THROAT: 7 RAM DIAMETER: 2.25 1800 MOTOR 220 VOLTS 60 HZ TANK CAPACITY: 20 MAX PSI 1.930 PUMP GPM: 11 MEASURES: 24" x 39" x 77" WEIGHT: 1.581 LBS COMES AS SHOWN IN PHOTOS Copyright 2014 1 Machinery Sales.com | All Rights Reserved, Descriptions Please read descriptions carefully. We list any features, specifications and details we know and/or research. If you don’t see the information you need or notice any discrepancy; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Payments We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after ... morethe close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. Item(s) will be relisted after few days and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. Storage We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. Feedback Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. Return Policy We accept returns for all our items listed as working. Items listed in“AS IS” condition or“For Parts or Repair” have no warranty. Read our descriptions carefully. We give 14
|
|
|
20 Ton Denison Multipress (27080)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 27080. DENISON/MULTIPRESS GAP FRAME HYDRAULIC PRESS MODEL: FH-20HC492D113A312 SERIAL NUMBER: 19297 GENERAL SPECIFICATIONS Capacity: 20 Tons Stroke: 12" Daylight: 21" Throat: 10" Closing Speed: 550 IPM Pressing Speed: 250 IPM Return Speed: 600 IPM Bed Size: 25-3/4" L-R x 17-1/2" F-B Reservoir Capacity: 55 Gallons Cylinder Bore: 4-1/2" Ram Diameter: 3-1/4" EQUIPPED WITH 20 HP Motor. 208/230/460/60/3 Dual Palm Button Operation Pressure Gauge Pressing Speed Adjustment Approximate Weight: 3300 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered ... morelocally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street. Cincinnati. Ohio 45223. 513-542-8400. 800-745-6008. Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157. ICCI: Tyler Rose 1-888-773-6785. Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308. All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees
|
|
 |