|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$20.00 Shipping Condition: New – Open box Location: Manchester, United States SquareTrade © AP6.0 Starrett 278 2 V-Blocks(1 Pair) And 2 Clamp Complete Set You are bidding on a Like New Starrett 278 2 V-Blocks(1 Pair) And 2 ... moreClamp Complete Set. Starrett No. 278 V-Blocks are precision ground to extreme accuracy. Product Description Blocks made of hardened steel. Manufactured and numbered in pairs. Tapped holes in sides(1/4- 20) for mounting face plates and angle irons. Angle iron may be attached to lathe face plate or held by magnetic chuck. 1" Diameter clamping capacity. Each block is about 1-1/4" square and 1-5/8" long. Product Features Blocks are made steel. Hardened and ground and numbered in series so that the V's in each set are always in alignment The blocks have a 1/4-20 tapped hole through the sides so that they may be attached to an angle iron Vees are central. Parallel, and square with the ends and sides. V-Blocks are precision ground to extreme accuracy. Starrett workmanship For more Information see: http:www.starrett.com/metrology/product-detail/Precision-Measuring-Tools/Precision-Hand-Tools/Precision-Shop-Tools/V-Blocks/278 The L. S. Starrett Company has been a continuous symbol of leadership and dependable service in the manufacture of fine precision tools. I will fully guarantee this item with a cost of $268- Proudly made in the US" We have lots of quality inspection tools available- see my other auctions. Shipping in the Continental US is $6.90- I have very competitive rates for International bidders that are always welcome. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
$11.00 Shipping Condition: Used Location: Attica, United States 1 full set, Starrett No S190 Little Giant Jack Screw. Set is in excellent condition. No dents or mill marks. Still in original box. Thank you for looking.
Buy It Now
$4.29 Shipping Condition: Used Location: Wylie, United States This is a Starrett 160 clamp. But we always answer. Item is sold AS-IS.
Buy It Now
$6.72 Shipping Condition: Used Location: Germantown, United States I have a set of Starrett V Blocks and Clamps. Part number 568C. They come in the original box as well. I am offering free shipping to the USA! Starrett ... moresells these for 466$ They are for general shop use and layout work. As well as for holding stock in place during light-duty milling, drilling, and grinding operations. All clamp screws have a hole to help secure the workpiece. V-Blocks(2) and Clamps(Matched Pair)
Buy It Now
$4.47 Shipping Condition: Used Location: The Villages, United States You are bidding a vintage STARRETT 161-A Toolmakers Parallel Clamp. 3/4" Capacity, 21/32" Throat Depth. Jaws nice. One Screw knob broken off/missing. ... moreAdjusts smoothly. Offered as is with no return due to the missing knob. $1.99 shipping via FIRST CLASS MAIL with Delivery Confirmation. Feel free to ask any questions I may have not answered for you and good luck bidding. Payment: Paypal only please. Payment expected within 3 days of item closing. Domestic Shipping: After receipt of payment. I ship within one business days to US Destinations via U. S. Postal Service FIRST CLASS MAIL with Delivery Confirmation for $1.99 to the successful winner of this auction. You will be notified via email when it is shipped. First Class mail is generally delivered within 3 to 5 days. Depending on your ZIP code. Delivery Confirmation is used on all shipments so we both can track the shipment. Returns: Return to me within 14 days of receipt for your money back(less shipping costs) if you're somehow unhappy with your purchase. Please check my feedback. I’m confident you won’t be disappointed. Understanding the condition of item/items as described and pictured. Thank you.
Buy It Now
$6.16 Shipping Condition: Used Location: Canyon Country, United States PRE OWNED BUT IN GREAT CONDITION, MINOR SCRATCHES AND NICKS, COMES 2 CLAMPS, NO ENGRAVINGS, YOU WON'T BE DISAPPOINTED, PLEASE SERIOUS BIDDERS ONLY, THANK ... moreYOU, GOD BLESS AMERICA.
Buy It Now
$7.57 Shipping Condition: Used Location: Saunderstown, United States Made by Starrett & One made by Toolmaker. For your Consideration are these (2) H.D. Machinist.
Buy It Now
$8.00 Shipping Condition: Used Location: Memphis, United States Here I have a STARRET LITTLE GIANT JACK SCREW no. 190A with original box. The tool screws all the way to the end. The box has shelf wear but all in tack. ... moreThanks for visiting and please take a peek at my other listings. If you have questions about this item. Or need more information please ask. I will answer to the best of my knowledge. I am not necessarily an expert on everything I sell so welcome information from you at anytime. I will not intentionally misrepresent items. If an item is lacking pieces I will state such. Additional photos are no problem. Everything is sold"as is" I make contact within 24 hours of the end of my auctions. In accordance with Ebay rules payment must be received within 4 days. If not received. An unpaid item case will be initiated. I will combine shipping if you are successful on more than one of my items ending within 24 hours of each other. If you buy something that is potentially breakable it's your decision to ask for insurance.
Buy It Now
$6.16 Shipping Condition: Used Location: Grand Rapids, United States PAIR OF STARRETT V-BLOCKS WITH CLAMPS PART#278 THE BLOCKS ARE MARKED 1/4 20 NC THESE ARE IN GOOD CONDITION SHIPS TO USA ONLY 8% NY RESIDENT TAX
Buy It Now
$6.05 Shipping Condition: Used Location: West Hartford, United States Starrett#240 B Pin Vise Includes a Starrett 1/16 punch
Buy It Now
$7.15 Shipping Condition: Used Location: Wooster, United States Starrett No. 568 V Block and Clamp- Machinists- Great Condition. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$4.47 Shipping Condition: New Location: Minneapolis, United States Great estate sale find. Never used. In original packaging. Photograph may not be the exact one shipped. Some have writing on them indicating a diameter ... morerod standard the owner paired them with. These standards are not included.
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States 568B Clamp Only for 568 V-Blocks, screw holes at 45 Deg and 90 Deg to hold either square or round work.
Buy It Now
$6.75 Shipping Condition: New Location: Chicago, United States Cast Iron Clamp Only for 268A / 268C V-Block.
Buy It Now
$15.35 Shipping Condition: New Location: Chicago, United States
Buy It Now
$10.00 Shipping Condition: Used Location: North Port, United States Starrett S 154 S Adjustable Parallel Set - 4 Pieces - Range 3/8" to 1 5/16". Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$20.00 Shipping Condition: Used Location: Sheffield, United States STARRETT 6" SCALE IS NOT INCLUDED. PHONE NUMBER will then be displayed. WHY BUY IMPORT WHEN A M E R I C A N TOOLING THE BEST IS HERE !
Buy It Now
$12.45 Shipping Condition: New – Open box Location: Jacksonville, United States STARRETT No. 567 Toolmakers V-Block and Clamp with Original Box in Like New Condition. This V-Block and Clamp are in excellent condition.may never have ... morebeen used. There are four 3/8-16 threaded holes in various locations on the block.
Buy It Now
Free Shipping Condition: Used Location: Gloucester City, United States Missing Slide Rod.
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States Starrett 1620. ( 118 ml ) Plastic Bottle.
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Nice used vintage Tools in working condition with scratches and marks. Free shipping with tools. One starrett and other 2 I think are local Toolmakers ... moremade? Note plastic on on thumb screw is half missing! Still working as is.
Buy It Now
$7.50 Shipping Condition: Used Location: Seabrook, United States Greetings and thanks for checking out my item! Available here is a vintage LS Starrett 161 AA clamp. It is in great used condition. It is available for ... morea BIN of $20.00 with FREE Shipping. Please check out my other items for more cool machinist items.
Buy It Now
$8.95 Shipping Condition: Used Location: Holder, United States Starrett 271C V-Blocks & Clamp Set. Machinist Tools in Original Box. 1-1/4" (32mm) Capacity. Where there are noticeable defects, we will attempt to describe ... moreit or picture it.
Buy It Now
Free Shipping Condition: Used Location: Byron Center, United States This tool is used and it may be missing a piece. Please look at the pictures closely as I don’t know much about it. This is sold AS-IS.
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States 162A Pin Vise with Knurled Handle. Range (in) : 0-.040".
Buy It Now
$14.38 Shipping Condition: Used Location: Castro Valley, United States STARRETT 271C V-BLOCK SET IN BOX AS SHOWN. V-BLOCKS(2) AND CLAMP AS SHOWN. U S A AMERICAN TOOLMAKER OWNED. THEY HAVE THE NUMBER ON OTHER SIDE TO DENOTE ... moreA MATCHED PAIR. THEY ALSO HAVE THE 3/16" SPLIT BUSHING IN THEM SO A 3/16" DOWEL PIN or ANOTHER 3/16" ROD CAN BE USED TO KEEP THEM IN ALIGNMENT AS SHOWN. BLOCKS ARE LIGHTLY ENGRAVED ON END BUT IS HARD TO SEE AND HARDER TO PICTURE BUT PLEASE LOOK! THESE COME AS SHOWN. NEED TO SEE MORE JUST ASK FOR MORE PICTURES. V-BLOCKS MEASURE 1-1/4" X 1-1/4" X 1-1/4" WITH A CAPACITY OF 1-1/4" ACCORDING TO CATALOG. VEE TOP AND BOTTOM. AS SHOWN IN EXCELLENT USED CONDITION. MADE OF HARDENED TOOL STEEL. PLEASE SEE OUR OTHER AUCTIONS. THANKS FOR LOOKING! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how yo
Buy It Now
$6.00 Shipping Condition: Used Location: Perry, United States Not quite sure if these were put in the right box, may not be s190 but are good condition jacks.
Buy It Now
$10.00 Shipping Condition: Used Location: Sheffield, United States USA TOOLMAKER MADE V-BLOCK AND CLAMP. USED V BLOCK MADE BY A US A TOOLMAKER. CLAMP FITS V BLOCK VERY WELL AS SHOWN. VERY HANDY DESIGNED VBLOCK! ONE VEE ... moreIN V BLOCK THAT IS ABOUT 9/16" WIDE AND IS PRECISION GROUND AS SHOWN.
Buy It Now
$11.60 Shipping Condition: Used Location: Fountain Run, United States Starrett No. 271 C V Block Set With Clamp& Original Box used machinist tools Box has marks. Coming apart a little with some wear. Tool is fully functional ... moreNote: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
Buy It Now
$22.25 Shipping Condition: New Location: Chicago, United States 1"X.065 THICK X 17". 1 BOX OF 20 BLADES.
Buy It Now
$11.60 Shipping Condition: New – Open box Location: Chicago, United States
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Store Categories. Click to close full size. STARRETT 278 V-Block/Clamp Set.2 Ea,1" Cap. STARRETT. Item Specifics. Item. V-Blocks and Clamp Set. Type. ... moreMaterial. Steel. Capacity(In. 1. Material. Steel. Includes. 2 V-Blocks. 2 Clamps. Item. V-Blocks and Clamp Set. Length(In. 1-5/8. Height(In. 1-1/4. Width(In. 1-1/4. Holes. 2. Application. Layout and Holding Stock During Light Duty Milling/Drilling/Grinding Operations. Shape. Rectangular. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complicated discount structure. We are able to keep our prices low. We have a small. Dedicated staff that works hard t
Buy It Now
$4.47 Shipping Condition: Used Location: Canyon Country, United States PRE OWNED BUT IN EXCELLENT CONDITION, NO ENGRAVINGS, VERY SMOOTH, YOU WON'T BE DISAPPOINTED, PLEASE SERIOUS BIDDERS ONLY, THANK YOU, GOD BLESS AMERICA.
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States 278B Clamp Only for 278 V-Block.
Buy It Now
Free Shipping Condition: New – Open box Location: Sturgis, United States Free shipping and returns with new old stock starrett 567 v block and clamp as shown its the one you get. Nice, box shows some Ware. Quality USA Made ... morestarrett tool.
Buy It Now
$10.40 Shipping Condition: Used Location: Canyon Country, United States PRE OWNED BUT IN EXCELLENT WORKING CONDITION, MINOR DAMAGES IN 2 CORNERS AND FRONT FACE, CLAMP IS NOT ORIGINAL BUT ITS STARRETT AND IT WORKS FINE, YOU ... moreWON'T BE DISAPPOINTED, PLEASE SERIOUS BIDDERS ONLY, THANK YOU, GOD BLESS AMERICA.
Buy It Now
Free Shipping Condition: New – Open box Location: Hurricane, United States Starrett 278B Clamp Only for 278 V-Block In Stock New
Buy It Now
Free Shipping Condition: Used Location: Mount Morris, United States This set of Starrett No. 54C Parallel Hold Downs are designed to firmly hold work flat on any machine bed, chuck or in a vice. They are especially useful ... morefor holding non-magnetic small work or thin materials without distortion to a magnetic plate or magnetic chuck.
Buy It Now
$8.45 Shipping Condition: Used Location: Spring, United States Starrett, Parallel Clamp Set, CAT #161-D, 2 clamps.
Buy It Now
Free Shipping Condition: Used Location: Olympia, United States Starrett 161AA Toolmakers Parallel Clamps, 3/4" Capacity
Buy It Now
$10.00 Shipping Condition: Used Location: Athol, United States Starrett 268 V Block& Clamp. 4 V's. 2)3/4& 2)1.1/4, OA 1.1/2 x 1.1/2 x 2 VG Cond. Replacement cost about $40. I accept bids ONLY FROM U.S.A. ... more50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 0.00 for shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States Up for sale is a top-quality USED V-block with clamp from STARRETT, a renowned manufacturer of precision tools. This V-block is made of hardened steel ... moreand can securely hold any workpiece in place. STARRETT 6" SCALE IS NOT INCLUDED.
Buy It Now
Free Shipping Condition: Used Location: Hillsborough, United States
Buy It Now
$8.60 Shipping Condition: New Location: Chicago, United States 162B Pin Vise with Knurled Handle. Range (in) 030-.062".
Buy It Now
Free Shipping Condition: Used Location: Crown Point, United States Here is a Starrett No. 190D auxiliary pointed screw for use with the Little Giant No. 190. It has a 20 pitch thread.
Buy It Now
Free Shipping Condition: New – Open box Location: Bechtelsville, United States I bet their. 0002 all around. I was not going to unwrap the sealed block but. Who out there is old enough to know that joke.
Buy It Now
$4.47 Shipping Condition: Used Location: Phelan, United States This vintage Starrett 268B V-Block Clamp is the perfect addition to your workholding and toolholding collection. Made of cast iron and designed in a V-block ... moreshape, this clamp is compatible with the 268A and 268C V-blocks. The brand is well-known for its high-quality products and this clamp is no exception. With a product number of 51288 and manufactured in the United States, this clamp is a must-have for any CNC, metalworking, or manufacturing enthusiast. Whether you are a professional or a hobbyist, this clamp is sure to meet your needs. Add it to your collection today and experience its unparalleled performance firsthand!
Buy It Now
Free Shipping Condition: New Location: Opa Locka, United States STARRETT 268A, 268B, V BLOCKS AND CLAMPS, 2 V BLOCKS AND TWO CLAMPS, BRAND NEW, MADE IN USA, IN ORIGINAL BOXES
Buy It Now
$10.99 Shipping Condition: Used Location: Athol, United States Nice large V-Block. Great quality heavy duty V-Block.
Buy It Now
$15.00 Shipping Condition: Used Location: Monee, United States For Sale: One unit Starrett Model 568A V-Block with Clamp, This is a clean V-Block that hasn't been used much.
Buy It Now
$5.40 Shipping Condition: Used Location: Niles, United States LISTED IS A PRE-OWNED STARRETT WEBBER HDA4 ECCENTRIC CLAMP TO BE USED WITH STARRETT WEBBER HEAVY DUTY GAGE BLOCKS. 2 SHIPPING SPEEDS OFFERED. BE SURE ... moreTO CHECK OUT MY OTHER ITEMS.
Buy It Now
$12.45 Shipping Condition: New Location: Chicago, United States 160 Toolmakers Steel Clamp 2" (50mm) Capacity. Each clamp is furnished with two take-up blocks that slip on the end of the screw. The blocks are held ... moreto allow a slight swivel action that conforms the angle of the block to the shape of the work being held.
Buy It Now
$7.15 Shipping Condition: Used Location: Canyon Country, United States vintage Starrett 2 V-Blocks & 1 Clamp No. 268 Series\ USA made. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$13.60 Shipping Condition: Used Location: Oregon City, United States This 8-piece set of Starrett S191 Little Giant Jack Screws is a must-have for any workshop. Made in the USA, these high-quality tools are perfect for ... morea variety of workholding and toolholding applications. With all attachments included, this set is complete and ready to use right out of the box.The brand speaks for itself, as Starrett is known for its precision tools. These jack screws are in great condition and have been well-maintained. Perfect for use in CNC, metalworking, and manufacturing, these jack screws will make your workholding tasks a breeze. Buy with confidence knowing that you are getting a quality product from a trusted brand.
Buy It Now
$4.46 Shipping Condition: Used Location: The Villages, United States Description THIS IS A VERY GOOD QUALITY VINTAGE L.S. STARRETT PIN VISE OR TOOL BIT HOLDER. THE HOLDER IS MADE BY THE L.S. STARRETT CO. OF ATHOL. MASS ... moreU.S.A. THE ITEM IS IN GOOD USED CONDITION BUT DOES HAVE SOME LIGHT WEAR FROM AGE/USE. EXCELLENT QUALITY USABLE TOOL BY GREAT COMPANY. MEASURES ABOUT 3" LONG. GREAT TOOL AT NO RESERVE AND WHAT YOU SEE IS WHAT YOU GET. SEE PICS.
Buy It Now
$8.60 Shipping Condition: Used Location: Des Moines, United States Starrett 268B clamp for 268A V-block. Clamps looks like it’s hardly been used. Beautiful condition.
Buy It Now
Free Shipping Condition: Used Location: Frankfort, United States
Buy It Now
$11.60 Shipping Condition: New Location: Chicago, United States Starrett 1610-4 Kleenscribe Layout Dye 4 oz. Plastic Bottle.
Buy It Now
$16.40 Shipping Condition: Used Location: Toms River, United States Starrett# 161-D Parallel clamp in excellent condition. Has name very lightly etched in one side. Otherwise perfect condition. Please ask any questions ... morebefore bidding. Ships usps priority flat rate box. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f9a8b6a53-0x101-
Buy It Now
$28.55 Shipping Condition: New Location: Chicago, United States Brown & Sharpe 599-793-1 Work Driving Dog Set. 1/4-2" Range. (aka lathe set).
|
|
|
|
Starrett 1" micrometer No. 221 and Starrett No. 161-B clamp, collectors
L. S. Starrett Co. No. 221 one inch micrometer in case with wrench. Also, be the only guy in your shop with the cool L. S. Starrett miniature machinist clamp, No. 161-b. The clamp has knurled screws to adjust but they also have small holes through them to tighten with a pin. The micrometer appears to be hard chrome finish. The clamp is blue steel. Both excellent. Always glad to combine shipping if possible.
|
|
|
Starrett No. 161-E parallel clamp
Starrett No. 161-E parallel clamp in good condition. SELLING TERMS-I expect payment within 48 hours of end of auction or item will be re-listed-Item is sold as-in with no warranty or return and described to the best of my knowledge-If you have a 0 feedback rating please message me before bidding as there are a lot of 0 feedback scammers lately and i will withdraw a bid if i can not get in contact with you. Free shipping to US only
|
|
|
STARRETT 161 AA MACHINIST PARALLEL CLAMP TOOLMAKER Free Shipping
Greetings and thanks for checking out my item! Available here is a vintage LS Starrett 161 AA clamp. It is in great used condition. It is available for a BIN of $20.00 with FREE Shipping. Please check out my other items for more cool machinist items.
|
|
|
Starrett 161C Toolmakers' Parallel Clamp, Great Condition (Sells for $56)
STARRETT 161C Toolmakers' Parallel Clamp(Sells for $56. From the Starrett Website- The Starrett 161 Toolmakers' Parallel Clamp features a single clamp(2 1/4" with 1 7/32" throat depth. 2 1/4"57 mm) capacity. 1 7/32(30mm) throat depth. The clamp is not new but has been used little. It's a little dusty. Fast, careful shipping. Thanks. Here's a link to the Starrett Website. CLICK TO ENLARGE end extra pics- CLICK TO ENLARGE International buyers: Please contact us with your location or address so we can calculate your shipping cost. Please note that international shipping can be costly. Thus it's best to email us BEFORE you bid. Thanks. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Machinists (13) Starrett 161-A Case Hardened Parallel Clamp
See Pic No Issues- Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY ... moreLOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no rid
|
|
|
Starrett Clamp No. 196-G
Good used condition Starrett No.196-g Clamp in original box. Up for auction is a Starret clamp not sure if other pieces shown in photo originally came with it but you get these pieces too Posted with
|
|
|
intage LOT OF 9 1-161-D L.S.STARRETT machinist clamp 8 NO NAME Parallel clamps
You are bidding on A LOT OF 9 PARALLEL CLAMPS ONE IS MARKED STARRETT IT IS ONE OF THE 4" AND THE OTHERS HAVE NO NAMES THAT I SEE. THERE ARE 2-6" 3-4" 2-3" AND 2- 2 1/4" ALL ARE IN GOOD SHAPE JUST NEED A LIGHT CLEANING. ALL LOOK TO BE A GOOD QUALITY MADE. ALL HAVE THE OLD OWNERS NAME ENGRAVED IN THEM. THERE IS ONE WITH A BROKEN HOLDING CLIP BUT DOES NOT EFFECT THE USE OF IT THE REST ARE ALL GOOD. HAPPY BIDDING. Any questions. Please ask. Weight is 10 POUND SHIPPED. PLE ASE NOTE INTERNATIONAL FIRST RATE SHIPPING BELOW. I insure all items that the post office offers insurance in that country. I do not set the cost of shipping. So please don't give me bad marks because the shipping was too high. I do combine purchases to save on shipping. So please wait for my invoice. I ship most items the day after payment is received-other ... morethan Sundays& holidays. The post office does not insure First Class International Mail. The post office no longer insures items to Great Britian. Ireland and some other countries. Please check with USPS.com to see if the post office insures to your country. For other countries, if you want your item insured, you have to select USPS International Priority Mail. Most international items have an extra charge added at customs. I can not change an item to gift or lower the cost. Insurance only covers the cost of the item on the custom's form. If you want to chance First Class with no insurance, please let me know before paying so I can add it as a shipping option. My shipping address is 609 Norway Street. Grayling, MI 49738. Please use USPS.com to calculate your shipping costs. Please use the eBay message system to contact us. I do not check PayPal. So please do not include notes when you pay. On May-14-13 at 15:39:41 PDT. Seller added the following information:
|
|
|
Used L.S. Starrett Company No 161 E Clamp Toolmakers Metal Parallel Machinist
Up for your consideration is a set of Used L.S. Starrett Company No 161 E Clamps. They are in good working condition w/ some endmill marks. Please look at pictures carefully& ask any questions you have before bidding or buying. Thanks'SHIPPING IS ACTUAL COSTS TO YOUR ZIP. PLUS INSURANCE IF REQUESTED' THIS ITEM WILL BE PACKED TO THE HIGHEST STANDARD, SURROUNDED IN BUBBLEWRAP& ENCLOSED IN A STRONG BOX TO ENSURE A SAFE JOURNEY. I LEAVE POSTIVE FEEDBACK IMMEDIATELY AFTER PAYMENT IS RECEIVED AND NOTIFY YOU WHEN PACKAGE WILL BE MAILED OUT ASAP. I SHIP USPS PRIORITY MAIL. FIRST CLASS OR PARCEL SELECT. PLEASE LEAVE ME FEEDBACK ALSO.IT IS VERY IMPORTANT TO ME TOO SEE THAT YOU LIKED YOUR ITEM& YOU RECEIVED IT SAFELY. Before you leave a neutral or negative feedback, PLEASE email me and I'm sure we can work out any problem, My ... moregoal is to have satisfied customers. THANK YOU! You can Pay me securely with any major credit card through PayPal, THANKS FOR LOOKING& YOUR INTEREST IN THE ITEM I'M LISTING. Posted with
|
|
|
Starrett No. 298 Key Seat Clamps Vintage In Original Box Square Lock Ruler Clamp
Starrett key seat clamps in original box these are old but in excellent condition the box has part of the label torn off on the front. Both stamped Starrett Posted with
|
|
|
Starrett PT99437 Clamp w/Box *NICE*
You are bidding on this Starrett PT99437 Clamp. The item is in good condition showing normal wear from use. It comes as shown. Good Luck Bidding!Bay) We do not ship internationally! Please read Terms& Conditions below BEFORE bidding! SHIPPING: Buyer to pay fixed shipping and handling charges. Please see"Payment Details" below for fixed shipping costs! This item is shipped USPS Priority Mail. Insurance coverage is included in the fixed amount. We take great care in packing our items and insure all shipments for the purchase price. We keep our handling costs as reasonable as possible and include cost of materials and insurance in those costs. We ship within 24 business hours of receiving payment. Items paid for on Friday after 12pm CST will ship out on Monday. REFUND POLICY: Unless noted otherwise. The item you are bidding on ... morehas been previously owned. We do stand behind our merchandise and try our best to make sure that it is working properly. If you receive your item and it is working improperly, please contact us within 14 days from receiving the item for a full refund{MINUS SHIPPING} PAYMENT METHODS ACCEPTED: Please email with any payment questions. PayPal Rules: We follow PayPal’s Seller Protection Policy which means that we will only accept payments from confirmed accounts and we only ship to the confirmed billing address for that account. We do not accept international PayPal payments. NOTE: PAYMENT MUST BE RECEIVED WITHIN 10 DAYS AFTER AUCTION CLOSES. TAX: In accordance with state law. Texas residents must pay 8.25% sales tax. Please email us PRIOR TO BIDDING with any questions you have and don’t hesitate to ask for more pictures!
|
|
|
STARRETT MACHINISTS PARALLEL CLAMP TOOLMAKER EARLY DESIGN ???
i000000. STARRETT MACHINISTS PARALLEL CLAMP TOOLMAKER EARLY DESIGN? Click to Enlarge Description: ITEM IS IN GOOD COND. JAWS MEASURE 1.5" WHEN OPENED WEAR FROM USE 1 ROD IS SLIGHTLY BENT AND 1 JAW IS NOT THREADED BY DESIGN WOULD BE MY GUESS MARKED L.S. STARRETT ATHOL MASS. Shipping: Payment: PAYMENT IS EXPECTED IN 3 DAYS OR LESS inkfrog terapeak.
|
|
|
Starrett Clamp 161B
A set of Starrett Clamps. Model 161B. In very good condition. Free shipping in the US 48 states. No International shipping. Payment due within 3 days. Questions are welcomed.
|
|
|
Starrett Parallel Clamp No. 161-D USA Excellent condition
Starrett# 161-D Parallel clamp in excellent condition. Has name very lightly etched in one side. Otherwise perfect condition. Please ask any questions before bidding. Ships usps priority flat rate box. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f9a8b6a53-0x101-
|
|
|
L.S.Starrett Stamped Hardened No. 567 V Block w/ Clamp No Box
This auction is for one(1) machinist's workholding tool generally described as follows. This is a V Block with the original Clamp. V-Block Stamped on one end: THE L.S. STARRETT CO. NO. 567 Stamped along one side near the threaded screw hole: 3/8-16 NC This block generally has the following features: Can be utilized in various positions to secure the item. Four tapped holes(2 in the base. 1 each side) Made of hardened steel. Measures approximately 1-7/8 inches square with base length of 3-1/2 inches. Condition is very good to excellent used with minor use marks but NO chips. Scratches or gouges. U" Clamp This forged clamp is original to the piece but not marked. The piece fits into the upper side groove of the V block. Retains the original functioning upper knurled hold down screw and double knurled side screw. Condition is very good ... moreused. The U clamp is straight. The upper and adjusting screws are straight. There are no cracks in the forging. Please note that one side of a knurled head on the side screw is ground smooth. Probably from use near a grinding wheel. There is NO BOX with these pieces. Thank you for checking our site and good luck bidding! Please review ALL the photos and ask questions before purchase!
|
|
|
STARRETT No. 196G or 645G DIAL INDICATOR CLAMP MACHINIST TOOLS *G
STARRETT No. 196G or 645G DIAL INDICATOR CLAMP MACHINIST TOOLS*G Condition/I n fo: Like new condition. NO engraving or personal markings, appears unused. Opens 1.5 inch, and depth is 1" This week I am selling many Starrett tools in excellent condition. Payment due within 48 hours of auction close. If you are bidding on other auctions contact me for a payment extension. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are ... moreresponsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Vintage Starrett 160 Toolmakers Steel Clamp
Please don’t pay me until I send an Invoice. Shipping is based on the final destination. Weight and final package size. I will calculate all of that at the end of the auction. The shipping information you see from eBay is an estimate.
|
|
|
VINTAGE L.S. STARRETT CO. MACHINIST PARALLEL CLAMP
Vintage L.S. Starrett Co. Machinist Parallel Clamp Very good used condition. Marked on the clamp is: THE L.S. STARRETT Co. ATHOL. MASS. U.S.A. No. 161-E MADE IN U.S.A. Quality made tool. Thank you for your interest.
|
|
|
Starrett #161-C Machinist Clamp(Tool Makers Parallel Clamps)
Starrett#161-C Machinist Clamp(Tool Makers Parallel Clamps) used condition. purchased from estate with other starrett items free shipping Posted with
|
|
|
LOT OF 4 STARRETT 161-A & BROWN & SHARPE 754-B SM PARALLEL CLAMP MACHINIST TOOLS
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS LOT OF 4 SMALL PARALLEL CLAMPS(2)STARRETT 161-A(2)BROWN& SHARPE 754-B MINOR SIGNS OF WEAR BUT ALL ARE IN GOOD WORKING CONDITION* PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE ... moreAND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. No RETURNS.
|
|
|
MACHINIST TOOLS LATHE MILL 2 Starrett Parallel Machinist Clamp s
VERY VERY VERY HEAVY! PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ... moreANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-14061b266ed-0x100-
|
|
|
Tool Set with De Sta Co 650 Clamp, Starrett 25-441J Dial Indicator, etc.
This is a used tool set with De Sta Co 650 Clamp and Starrett 25-441J Dial Indicator. Please see photos for more details. Thank you for looking and good luck.
|
|
|
Starrett Clamps, Cincinatti Clamps, and Union Clamp, Great Working Condition Lot
Starrett Clamps. Cincinatti Clamps, and Union Clamp, Great Working Condition Lot Includes(6) of Cincinnati Tool#52(1) Cinicinnati Tool#566 1" 1/4(1) Starrett No. 161 A(1) Starrett No. 161 B(1) Union tool 4"
|
|
|
Machinists (F14) Starrett Matched Parallel Clamp Set
See Pic No Nicks Model No. 161-C 1 1/2" Jaws Max Opening 2 1/2" PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" ... moreon 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im l
|
|
|
lot of 2 VINTAGE STARRETT 161-E 161E PARALLEL CLAMP MACHINEST LATHE MILL
These clamps. Starrett 161-E, are in nice working condition. They are incised with a name. See pictures for more information and a better description. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE L.S.STARRETT & CO ATHOL, MASS. USA PARRELL CLAMP NO. 161AA
THIS AUCTION IS FOR(1) CLAMP PLEASE SEE PICTURES ABOVE AS THEY ARE PART OF THE DESCRIPTION. FEEL FREE TO ASK QUESTIONS. BEST OF LUCK TO YOU. SIZE: 3/4'
|
|
|
L.S. Starrett Company No. 161-D Parallel Toolmakers/Machinist Clamp - 2 3/4"
DETAILS: The L.S. Starrett Co. Toolmakers' Clamp Model 161-D 2 3/4 inch capacity 1 25/32 throat depth Hardened steel Rounded jaws Jaws are 4 inches long Great for machining. Tapping and other precise work Very good condition Used Please take a good look at the 10 photos provided for your viewing scrutiny as they are best examples of actual condition DISCLAIMER: We are not perfect. We do research on each item to ensure it is decribed accurately. Honestly and if possible the operational status. Everyone makes mistakes. If you see one here in relation to an item specific please feel free to let us know so we may take action to correct it Some statements made as to condition are our opinion. Example: Item may appear to be very good us. But different to you. That does not constitute an item as"not as described" If a Buyer doesn't ... moremake specific inquiries regarding an item it is not our fault if your expectations and our good faith description may differ slightly We are resellers. Not collectors- a tiny blemish to us may appear more significant to the collector's eye We provide multiple photographs. Shot at different angles under different lighting to give the buyer the best evidence of actual condition It is sometimes impractical and/or impossible to list every blemish or aspect of an items condition We ask that if there are any doubts the Buyer should ask questions ahead of time and that the Buyer review our listings in detail PAYMENT: Paypal preferred Item shall be paid for within 4 days of auction close unless prior arrangements are made with Seller. Prior DOES NOT mean 2 days after auction ended If item is NOT paid for within specified time period and there has been no related communication between Buyer and Seller the Seller reserves the right to file an unpaid item claim with Ebay We are not a lay-away service and don't hold items until Buyer's next paycheck comes in. If Buyer cannot pay within specified time and/or Buyer makes no request from us to hold item in advance for a short r
|
|
|
Starrett Parallel Jaw Clamp, No. 161-D
Starrett clamp. Approx. 4" overall jaw length. Has a few nicks and scratches. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
L.S. Starrett Company No. 161-D Parallel Toolmakers-Machinist Clamp--4 inch
This is a 4 inch Starrett parallel machinists clamp. The threaded rods are straight with no thread damage. They are in great condition with a couple of tool marks. Contact me with questions. I will list more of these soon.
|
|
|
2 Parallel Starrett No.161 E Clamps + Smaller No Name Clamp Machinist Tools Lot
Lot of 3 parallel machinist clamps. 2 clamps are Starrett No.161E. One of the Starrett clamps has some thread damage near screw knob but does not affect usage(view pic) Smaller clamp has no name and shows a lot of wear but is usable. Coke can is in picture to help show size Contact me with any questions. U.S. shipping only.
|
|
|
STARRETT 196G CLAMP WITH SNUG ATTACHED MACHINIST TOOL TOOLING
STARRETT 196 G CLAMP WITH SNUG ATTACHED AS SHOWN IN PICTURE IN VERY GOOD USEABLE WORKING CONDITION
|
|
|
Starrett No. 161D Parallel Clamp And .297" Shims
Made in USA Starrett No. 161-D clamp and pair of.297" shims or gages. Not sure why.297" But you never know when you need matching blocks of any size. No name etchings. Hardware may not be original, but still functions well. Posted with
|
|
|
Metal Parallel Clamp LS Starrett Co Usa Made No 161-E Vintage Machine Tool
Vintage LS Starrett Co. No. 161-E Metal Parallel Clamp Made in the USA. Dirty but in good working condition(see pics) Please study the photos carefully as they are an important part of the description. Feel free to request any additional photos. We purchase many of our vintage items from auctions and estate sales and try our best to describe them as accurately as possible. But what may appear as excellent to us. May in fact be"good" or"very good" to you. So please don't hesitate to ask us any questions BEFORE bidding or making a purchase. We encourage questions and answer them promptly! Please contact us prior to leaving feedback if you are not satisfied. We will happily work with you to make sure you are completely satisfied. Customer Service is our Number One priority! Check out our feedback rating and bid with confidence! ... moreThanks for looking! International Buyers: Please contact us prior to bidding on or purchasing an item if you do not see a shipping cost for your country. Please note that we can only provide international shipments with a customs number. Not a tracking number. And although we ship within 24 hours of receipt of payment, it could take 3-4 weeks or longer for delivery based on possible postal and/or customs delays.
|
|
|
Starrett 161A Clamp set of two machinist clamps
One of these clamps needs a new adjustment screw. The other one is in great shape.
|
|
|
Starrett Clamp 161D, Set of two machinist clamps
I don't think these have ever been used. Very good condition.
|
|
|
Machinists B2-322 USA Starrett 164B Toolmakers Clamp
SEE ALL THE BLOCKS IN 322-B2@ see pics for details@ all of these are vintage and nicely done from a master toolmaker* as always. combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. ... moreWill definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@
|
|
|
Starrett Co Toolmakers Parallel Clamp, #161-A 161A, Old, Used, Made in U.S.A.
Starrett Co Toolmakers Parallel Clamp. 161-A 161A, Old, Used, Made in U.S.A. Toolmakers Parallel Clamp. 161-A The Starrett Co. Athol. Mass, U.S.A. Measures about 3-1/4" x 2" Please ask all the questions you want before you purchase. We'll do our best to answer quickly! We're happy to accept reasonable offers on this item. When making your offer. Please keep in mind that the item price includes shipping(free to our customers) Shippi ng is by USPS Buyer pays return shipping See our Feedback to purchase with confidence! 9.7.1-13oz 03/14 inkfrog terapeak.
|
|
|
STARRETT 161E TOOLMAKER'S PARALLEL CLAMP SET
Starrett 161E Toolmaker's Parallel Clamp Set This auction is for a pair of parallel clamps. I purchased them as a tool& die maker and I no longer need them because I have retired. These open up to 3-1/4 inch between the jaws. The throat depth from the end of jaw to the first screw is 2-1/4 inch. They are in very good conditions as are my other tools. Please check out my other auctions. Thanks for Looking.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14523f5b9cc-0x100-
|
|
|
L.S. Starrett Toolmakers Parallel Clamp No.161-C and a Starrett outside caliper
The clamp is great shape. The outside caliper has a bit of wear but works fine still. the tips of it have been sharpened a little and the is an engraved number over the sterrett logo on one side. the small knobs spreads the caliper open in very small amounts.
|
|
|
STARRETT NO. 161-C PARALLEL MACHINIST CLAMP MACHINISTS MACHINISTS' USA
STARRETT NO. 161-C PARALLEL MACHINIST CLAMP MACHINISTS MACHINISTS' USA. HAS A NAME ETCHED ON SIDE OF CLAMP CHECK PHOTOS. AS IS
|
|
|
Starrett #PT99437 Clamp For Indicator And Inspection Stand & Lathe
ALL OUR AUCTIONS START FROM.99 CENTS@ THEPLACETOBUY1984! This Item Retails For Over 80.00! The Item You Are Bidding On Is a Inspection Tool Accessory. With Overall Dimensions Including: Capacity(s) 1-1/4" Overall Length: 3-1/2" ITEMS COME AS SHOWN IN PICTURES. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Just a Few Simple Notes on Shipping and Other Questions Below Before Paying. Please Ask For Shipping DISCOUNTS When Purchasing Multiple Items. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. If you have ANY shipping questions, please contact us PRIOR to bidding. We apologize for any inconvenience but unless prior arrangements are discussed. ... moreWe DO NOT ship internationally. Please E-MAIL US at theplacetobuy1984@gmail.com or through eBay Messages if you have QUESTIONS or CONCERNS. Our goal is to be clear about our products and prices so that you are happy with your purchase! How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select MORE ACTIONS 5. Select REQUEST TOTAL. Thank You For Looking And Good Luck Bidding!
|
|
|
STARRETT (2) No.161-A & (1) No. 161-B PARALLEL TOOLMAKERS CLAMP USA
1) 161-B Clamp- 1-3/4" Capacity. 1" Throat Depth(MSRP $57.00/ pr) 2) 161-A Clamps- 1-1/4" Capacity. 13/16" Throat Depth. MSRP $55.00/ pr)
|
|
|
starrett 268B cast iron clamp 1 1/8 dia.hold capacity,with 3 268 & 3 278 vblock
L.S. Starrett 268B clamp in great cond. includes(3) Starrett 268 v blocks and also(3) Starrett 278 v block in great cond other than surface rust stains.also a small clamp which needs to be tapped and a new bolt put back in.this is quality tooling.feel free to ask any?thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145ead36c81-0x117-
|
|
|
Starrett 161-E parallel clamp w/ retainer clip 3.5x2.25" throat NICE Cond USA
Solid machinist's clamp w/ retainer clip to hold top arm in place while adjusting. throat is 2.25" deep. And opens up to 3.5" Very good used cond. No damage. Works well. Clean with no apparent rust. Weighs about 2lbs. Zoom pictures to examine condition. Feel free to ask questions before you bid! ==========================. I pack for protection and ship quick! Packing and shipping is done on Monday. Wednesday and Friday mornings. Win or buy and pay promptly on a M.W, or F morning and I'll ship THAT morning!
|
|
|
STARRETT (1) No.161-A & (2) No.910A Luflin (1) ? PARALLEL TOOLMAKERS CLAMP USA
All move freely
|
|
|
L S STARRETT CLAMP MARKED 161-D ATHOL MASS
CLAMP HAS 4 INCH JAWS. MARKED L S STARRETT, I HAVE NOT CLEANED THE CLAMP I HAVE LEFT IT AS FOUND, THE CLAMP WORKS FINE AND HAS THE ORIGINAL PARTS, AGAIN IT HAS SURFACE RUST FROM CELLAR STORAGE
|
|
|
Starrett parallel clamp vintage made in USA machinist metal
Some light pitting. Free shipping
|
|
|
Starrett 161D machinist parallel clamp
Used newer version of the 161D machinist parallel clamp with the split ring retainer on the forward adjustment screw rather than the spring clamp attachment found on older models. Will combine shipping.
|
|
|
Vintage Starrett 161D machinist parallel clamp
Looks and works great. This is an older model of the 161D. Notice the spring clamp attachment on the top of#2 jaw to retain the forward adjustment screw. This is how the 161D is listed and illustrated in the Starrett Precision Tools catalog#26. Copyright 1938. Will combine shipping.
|
|
|
Machinists 6/27 Buy Now- Iconic Starrett 161 B Case Hardened Parallel Clamp
perfect ~-combine shipping Its easier on me. Cheaper 4 you and its the right thing 2 do@ see pics for details@ Buy my stuff. I need to upgrade my Gallardo to an Aventador(really) I have great feedback. I have a PhD in usps flat rate box stuffing I have a great attitude. Im batting.666 which ain't too bad* as always.consider combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money ... morewhen I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping iv
|
|
|
Machinists 7/7 B1 Iconic Starrett 161C Toolmakers Clamp Set Matched
This is the real USA deal-not some phony bologna Chinese copy Treasured tool from a departed master toolmaker. Perfect. See pic for details from a departed master toolmaker PS ever notice how much of my stuff ships via el cheapo first class for $3.50 or LESS? ANYONE ELSE DO THAT? Nooooooooooooooooooooooooooooooooo. Y GET BONED ON SHIPPING? PSS-100% OF MY STUFF GOES OUT THE SAME DAY 7 FEAKING DAYS A WEEK SEE ABOVE QUESTION! as always. no stooped prices no el bono on shipping +combine! There are lots of nice USA squares in this auction* as always.consider combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. ... moreCheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine
|
|
|
Machinists 6/29A BUY NOW Iconic Starrett 161A Parallel Clamp -Case Hardened
C" pic 4 details El cheapo el shipo see pics 4 details-combine shipping Its easier on me. Cheaper 4 you and its the right thing 2 do@ see pics for details@ Buy my stuff. I need to upgrade my Gallardo to an Aventador(really) I have great feedback. I have a PhD in usps flat rate box stuffing I have a great attitude. Im batting.666 which ain't too bad* as always.consider combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools ... morefor me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& TH
|
|
|
STARRETT No. 161-E PARALLEL CLAMP & 2-1/4 deep jaws machinist tools *11
Only one of the clamps is a Starrett. The other does not have a name stamped on it. One of the screws on the Starrett is slightly bent but still works fine. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. ... moreI will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
1 Starrett 3" Parallel Clamp 161-C for parts only
Only has 1 screw and empty through-hole needs to be re-tapped. Will combine shipping. Please wait for combined invoice at end of all my auctions you are bidding on.
|
|
|
Machinists 7/18 BUY NOW Starrett Hard 2 find 161 AA Toolmakers Clamp
see pix for details rare extra small size Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what ... moreit izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here
|
|
|
STARRETT PARALLEL CLAMP, #181A, USED, VINTAGE
VINTAGE USED STARRETT PARALLEL CLAMP. PART#181A. NICE CONDITION. SEE PICTURES FOR ALL CONDITION DETAILS. PAYPAL ONLY. PLEASE CONTACT WITH ANY QUESTIONS.
|
|
|
VINTAGE STARRETT PARALLEL CLAMP ATHOL MASS USA 161-E
VINTAGE ONE STARRETT PARALLEL CLAMP MARKED ON THE CLAMP NO. 161-E MARKED ON THE CLAMP THE STARRETT CO. ATHOL. MASS USA IT LOOKS LIKE ONE OF THE SCREW POSTS MAY BE SLIGHTLY BENT
|
|
|
Single Starrett parallel clamp Model 161-C
Normal 0 Normal 0 The Toolmaker’s Chest Up for auction is a single Starrett parallel clamp Model 161-C. This is from a retired toolmakers estate and is in pretty good overall condition with no major problems that I can see; though they do have some“cutter” marks on one edge and the threads are banged up but they have been"chased" so they run smooth. The red you see in the pictures is not rust- it's just the lighting. Please ask any questions before purchase. I’ve included multiple photos to try to show its condition. I do not ship internationally except thru eBay’s Global Shipping Program. Check to see if your area is being serviced before bidding. Items shown are guaranteed to be as described to the best of my ability. The pictures are those of the actual item(s) being auctioned. Please email me with any questions regarding ... morethe item being auctioned. And I will answer all questions ASAP. All items are"as is" and no warranties are implied or guaranteed g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147ac598e55-0x113-
|
|
|
VINTAGE STARRETT PARALLEL JAW CLAMP 161-E
Used Starrett Parallel jaw clamp# 161-E in good condition. NO shipping outside the U.S. Any questions feel free to ask. Thanks Bill 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-1485345ba97-0x107-
|
|
|
Starrett Vintage Toolmakers Clamp / Vise Set of (2) 1-1/8" Capacity, Made in USA
Normal 0 For your Consideration is this Starrett Vintage Toolmakers Clamp/ Vise Set of(2) 4-3/4" Long when all the way open. 3-5/8" Long when closed. 23/32" Wide. 1-1/8" Capacity. Minor Nicks and Staining(as pictured) Made in USA. This tool is in good used working condition. See pictures and email me with any questions. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB9.2-5824-32 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding ... moreor buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
STARRETT USA Made Micro Machinest Vise Clamp Gunsmith Model 160 No Reserve
SCROLL ALL THE WAY DOWN FOR PHOTOS! Up for Auction is this USA Made STARRETT Micro Vise Clamp. Model: 160 Used. But still in excellent condition. Has Original Owners Initials Etched Very Small On Base. NO RESERVE SEE PHOTOS BELOW SCROLL DOWN FOR PHOTOS SEE PHOTOS BILL We do not have a buy it now. It is an auction. Once an item is paid for. Please email the following day if a tracking number is needed and we will forward all information. All shipping is calculated thru eBay. Please see shipping calculator below pics. C h e c k o u t m y o t h e r i t e m s! This auction will start out at $.99 NO RESERVE! Buyer pays for S/H/I. Additional Shipping Costs for Alaska& Hawaii Be sure to add me to your f a v o r i t e s list! Shipping and handling will only be combined if auctions are won within 72 hours of one another. Sorry. NO exceptions. ... moreGEORGE W BY PLACING A BID YOU ACCEPT THESE TERMS: If you have no feedback rating or you are new to eBay. Contact us before you bid with your contact info. There are to many Newbies that do not pay Items are guaranteed to be in stated condition. If you are not satisfied with an item. You must contact us within 72 hours of receipt of item. Sorry. NO INTERNATIONAL BIDDERS. Payment must be received within 5 days of the completion of the auction. We reserve the right to re-list the item if payment has not been received within provided amount of time. We also reserve the right to cancel the bids of any member with a negative( feedback rating. We never send second chance offers.if you get one it is not from us! This is an auction sale and the sale of this item will be considered final. All items are sold as is described but we guarantee our descriptions! We have endeavored to photograph and accurately describe every item as to its condition and authenticity to the best of our ability. We intend that photographs are part of the description- we take multiple photographs. If you are not sure what you are bidding on. Please ask questions before placing a bid. We do accept retur
|
|
|
Starrett 161-D Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth
ONE. Starrett 161D Toolmakers Parallel Clamp. 3/4" Capacity, 21/32" Throat Depth Free shipping to the lower 48 states only. We usually accept Best Offers Check out my!
|
|
|
# 161E - L.S. STARRETT's Largest Quality Toolmaker Parallel Steel Clamp U.S.A
Sale is for(1) No. 161E- L.S. STARRETT- Parallel Machinist Clamp has some witness marks or ID marks as pictured. I believe this is is the largest Starrett Clamp offered. Look at the pictures and make your decision. DON'T BORROW EQUIPMENT YOUR SHOPS OWNER LOOKS AT THIS AS WASTING THE TIME OF 2 OF HIS MACHINIST. NO DISAPPOINTMENTS HERE Please look closely at the photos to help determine the condition for yourself. Use the enlarge and zoom features to help. will power
|
|
|
No. 161D - L.S. STARRETT Quality Toolmaker Machinist Parallel Steel Clamp U.S.A
Sale is for: 1) No. 161D L.S. STARRETT CO. Parallel Machinist Clamp. Look at the pictures to help make your decision. USE AMERICAN MADE MACHINIST TOOLS TO EARN YOUR AMERICAN DOLLARS. NO DISAPPOINTMENTS HERE Please look closely at the photos to help determine the condition for yourself. Use the enlarge and zoom features to help. will power
|
|
|
Starrett No.161-D Tool Makers, Machinists, Parallel Clamp
Up for auction is a L.S. Starrett. Co. 161-D clamp. Made in Athol. Mass. USA. It is in good functioning condition. I will combine shipping. Thanks and happy bidding!
|
|
|
L.S. Starrett 161 AA Machinist Tool Maker Parallel Clamp Lathe Milling Machine
Buying 1 Starrett 161 A A clamp in used condition. Have 5 available at time of listing and yours will be randomly selected from the 5. All are in similar shape. Be sure to check out my other items for more great tooling finds.
|
|
|
Vintage L.S. STARRETT CO. No.161-E MACHINIST CLAMP TOOL
Vintage L.S. STARRETT CO. No.161-E MACHINIST CLAMP TOOL*PLEASE see Fixed Shipping Charges before bidding(shipping charge includes full Insurance& Tracking Number) We do combine Shipping charges on multiple Items won. Maryland buyers are charged 6% tax- Run Mouse Cursor over smaller Pictures to enlarge them. You are bidding on this vintage. No. 161-E, L.S. STARRETT Co. machinist vice clamp that was purchased from a local Estate Sale along with some other early Machinists tools& Items(see other Auctions) It looks to still be in good, used condition and has some surface wear while working fine. Nice piece that will make a great addition to any collection or as the perfect Gift. Please take a look at the Pictures and email with any other questions, Thanks& Happy Bidding! It will be packed with extra care/packaging for safe delivery. ... moreFree Pick-Up of Winning Item(s) is always welcome! Alaska& Hawaii high bidders will be charged shipping rates accordingly. We ship small Items& International winning Items via The United States Postal Service so EMAIL for Shipping Costs. BE SURE TO TAKE A LOOK AT OUR OTHER EARLY ESTATE SALE& UNIQUE ITEMS THAT WE CURRENTLY HAVE UP FOR AUCTION& Have a great day!
|
|
|
Machinists11/24 BUY NOW USA Starrett No. 161C Toolmakers Parallel Clamp
Works 100% ~-c*o*m*b*i*n*e shipping Its easier on me. Cheaper 4 you and its the right thing 2 do@ see pics for details@ Buy my stuff. I need to upgrade my Gallardo to an Aventador(really) I have great feedback. I have a PhD in usps flat rate box stuffing I have a great attitude. Im batting.666 which ain't too bad* as always.consider combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping ... moremoney when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest sh
|
|
|
L.S. STARRETT CO. Toolmakers' Parallel Machinist Clamp NO.161-B
L.S. STARRETT CO. Toolmakers' Parallel Machinist Clamp NO.161-B FAST FREE SHIPPING FAST
|
|
|
2 Vintage Starrett Model 161-C Clamps and 1 Lufkin 910B Clamp - Made in USA
The 2 Starrett Model 161-C Clamps are 5" in length by 3 1/8" in width The maximum opening for the 161-C's are 2 1/4" The One Lufkin Model 910B clamp is 3 1/4" in length by 2" in width The maximum opening is 1 1/4" Shipping costs of $5.95 is for the lower 48 states only. Any other buyer will need to receive a shipping quote from us. Email me with your questions or requests.
|
|
|
THE L.S. STARRETT TOOL CO. MAKERS PARALLEL CLAMP NO. 161-B ATHOL MASS. U.S.A.
This sale is for a Starrett Parallel Clamp the tool is used. Shows some wear but is in good and working condition. No.161-B There are No owners markings Comes as seen in pics. Thanks for looking and Happy buying. International Bidders Please Read This BEFORE YOU BID! Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. I AM NO LONGER OFFERING ... moreFIRST CLASS INTERNATIONAL SHIPPING. IT DOES NOT PROVIDE TRACKING OR ALLOW US TO BUY INSURANCE. I HAVE HAD TO MANY PACKAGES NOT SHOW UP TO THE BUYER. IT IS TO COSTLY FOR ME TO ABSORB THE LOSS FOR SHIPPING CHARGES AND PRODUCT. I do NOT claim to be an expert on anything that I list. But I do try to give an honest and accurate description of the items I list. I do not end auctions early so please don't ask. Please email any questions about the item Prior to bidding. Shipping: I will combine shipping for like items won within 7 days. Just let me know if you plan to bid on other items and I will wait to invoice you. I usually ship Postal Service and UPS at least 3 days a week but do have occasion that I am unable to ship for a few days but will almost always ship within 3 days of payment with the exception of holidays. CUSTOMER SATISFACTION IS OUR TOP PRIORITY. Please remember when leaving feedback on shipping time. Its how long I took to process your order, you are not rating the Post Office on how long it took to get to you, please keep that in mind. Bid with confidence, as we are an old-fashioned Mom& Pop store with customer satisfaction as our top priority. Pay
|
|
|
L.S. Starrett Co. #160 Small Vise Clamp Micrometer Tool
Used but in perfect working condition
|
|
|
vintage STARRETT # 161-A precision machinist fine adjustable clamp
vintage STARRETT# 161-A precision machinist fine adjustable clamp Shipping: If you win more than one auction I will be happy to combine the shipping. Host all your Images for one low price: DataZap.net
|
|
|
The L.S. STARRETT CO. No. 161-AA Small Machinist Clamp
Have listed a small Starrett clamp 161AA. Do not know anything about how they work. Please contact me with questions or concerns before bidding. I only know what I read on the clamp. Sorry, No Returns. Most items ship next business day after receipt of payment. Accept PayPal Only-Ship to USA Only. Thanks for looking.
|
|
|
starrett 161-A machinst parallel clamp works also no/name clamp that is striped
What you see is what you get the Starrett 161-A is smooth and good. The other is not. Buy one get one free I say. thanks
|
|
|
Starrett Parallel Clamp union tool company clamp & 2 shop made?? machinist tools
Check out our Ebay page for more great machinist items/tools. Please see pictures for additional information. For Global Shipping: Please review fees and policies for International buyers before bidding. We don't control fees that Ebay Global Shipping charges. Combined shipping is offered for multiple orders. Additional 3-5 handling days. If you have questions about our items please feel free to message us. Thank you and have a great day! We are willing to adjust shipping to save money to a different USPS service. Please message us with the shipping service FROM USPS that you desire and we will gladly refigure the invoice. H A P P Y B I D D I N G! Item Code A-78
|
|
|
MACHINIST'S TOOLMAKERS STARRETT #161A PARALLEL CLAMP HARDENED
HAS HAD GENERAL USE.GOOD USABLE CONDITION. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE* I AM NOT AN EXPERIENCED MACHINIST OR TRADESMAN AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST.CONTRACTOR OR OTHER TRADESMAN.SOME ITEMS HAVE PITTING OR LIGHT SURFACE RUST, INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,CUSTOMIZED,REPAIRED,NEED FURTHER METICULOUS CLEANING,NOT BE FULLY ACCURATE OR COULD POSSIBLY NEED CALIBRATION,MAY BE CHIPPED,NEED SHARPENING,HAVE DUPLICATE SIZES.MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE,A SECOND TOOL SHOP OR MAINTENANCE TRUCK, FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING.PLEASE CHECK OUT MY OTHER CUTTING TOOLS.TOOLING,TOOL HOLDING,TOOLMAKER,MECHANIC'S,CARPENTER AND OTHER COLLECTIBLES AND OTHER ... moreQUALITY USABLE STANLEY,STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S,MECHANIC'S,ARTISTS TOOLS AND OTHER TRADE TOOLS& EQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE*NOTE*AS ALWAYS MULTIPLE PURCHASES IN THE SAME DAY AUCTION LOT WILL DECREASE ALREADY LOW SHIPPING COSTS. PLEASE READ BELOW* I COMBINE SHIPPING ONLY ON ITEMS ENDING IN THE SAME DAY AUCTION LOT* TRACKING INFO WILL BE UPLOADED WITHIN 1 BUSINESS DAY FROM PAYMENT RECEIPT* INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.95(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIORITY BOX $11.75. LARGE FLAT RATE PRIORITY BOX $16.50.IN USA ONLY $$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$SAVE SEE USPS ON LINE FOR BOX SIZES*FOLD OUT RULER PICTURED NOT INCLUDED AS AN ITEM IN THE LOTS.FOR REFERENCE ONLY* Post
|
|
|
MACHINIST TOOLS LATHE MILL 2 NICE Starrett Parallel Clamp s for Set Up Hold Down
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. 1
|
|
|
Starrett 161c ,Machinest, ToolMakers Clamp
Starrett 161c Clamp. Used but in good condition. Screws Turn Freely.
|
|
|
L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA USA
This vintage parallel toolmaker/machinist parallel clamp was made by“The L. S. Starrett Co. Athol, Mass. USA, No. 161-AA, Made in USA” engraved on one piece) The parallel bars measure 1 5/8 across and the screws are 1 ¾ and 1 7/8 inches tall. Note: I have other vintage tools for sale. Please take a look. Condition: Used with minor rust. Screws still twist easily. Please review photos as they are part of the description. Normal 0 false false false EN-US X-NONE X-NONE Note from the seller: All items are from a smoke/animal free environment. Payment: Sign up for PayPal; the fast. Easy, and secure way to pay online. Payment is expected within 4 days. I only use PayPal as a payment choice. Returns: Returns are accepted within 14 days. Buyer pays return postage and there may be a restocking fee if the item is not returned in the same condition ... moreas it was sold. Returns are always accepted if the condition of the item is not the same as it was described in the sale posting. Shipping: I will ship within 24 hours of receipt of payment on normal business days using the U.S. Postal Service including automatic tracking. If you wish first class or priority services. Please let me know. I charge the“Shipping Wizard” calculated cost for your ZIP code. Handling fees are sometimes added for difficult/fragile items to mail. Star Rating: My goal is to offer you quality customer service. I hope that I can provide the service that generates thoughtful and meaningful ratings from my buyers. Feedback: Feedback is very important to the EBay community. I will leave feedback on each buyer and I hope that each buyer will leave feedback on the service they received from me. If you have any problems with the item you purchased. Please contact me before leaving a negative feedback. Let’s work out the problem together. I want your buying experience to be a good one. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
MACHINIST'S PARALLEL CLAMP S STARRETT 161A & OTHER SHOP MADE
STARRETT IS MISSING SCREW HOLDER AND HAS BEEN MODIFIED.OTHER CLAMP NEEDS A LONGER SCREW. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE* I AM NOT AN EXPERIENCED MACHINIST.CARPENTER OR OTHER TRADESMAN AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST,METAL WORKER,CONTRACTOR OR OTHER TRADESMAN.SOME ITEMS HAVE PITTING OR LIGHT SURFACE RUST, INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,CUSTOMIZED,REPAIRED,NEED FURTHER METICULOUS CLEANING,NOT BE FULLY ACCURATE OR COULD POSSIBLY NEED CALIBRATION,MAY BE CHIPPED,NEED SHARPENING,HAVE DUPLICATE SIZES.MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE,A SECOND TOOL SHOP OR MAINTENANCE TRUCK, FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING. PLEASE CHECK OUT MY OTHER CUTTING TOOLS.TOOLING,TOOL ... moreHOLDING,TOOLMAKER,MECHANIC'S,CARPENTER AND OTHER COLLECTIBLES AND OTHER QUALITY USABLE STANLEY,STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S,MECHANIC'S,ARTISTS TOOLS AND OTHER TRADE TOOLS& EQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE*NOTE AS ALWAYS MULTIPLE PURCHASES IN THE SAME DAY AUCTION LOT WILL DECREASE ALREADY LOW SHIPPING COSTS. PLEASE READ BELOW* I COMBINE SHIPPING ONLY ON ITEMS ENDING IN THE SAME DAY AUCTION LOT* TRACKING INFO WILL BE UPLOADED WITHIN 1 BUSINESS DAY FROM PAYMENT RECEIPT* INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.95(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIORITY BOX $11.75. LARGE FLAT RATE PRIORITY BOX $16.50.IN USA ONLY AND GLOBAL SHIPPING ONLY SEE USPS ON LINE FOR BOX SIZES*FOLD OUT RULER PICTURED NOT INCLUDED
|
|
|
Starrett Machinist Clamp 2-1/8" Machinist Tool Maker Die Maker Estate Tools
We are currently liquidating many machinist tools that come from a career Machinist and this is just one of the many quality tools we have to offer: Vintage Quality Piece Made in USA I am not going to make these ads long and boring. Please refer to the pictures for more detail. Also feel free to ask any questions. Many machinist quality tools as well as other goodies to list so good luck and check back often! Please see photo's for a full description.I try to take as many photos as possible so you. The buyer, can see what the product will look like in your home! All of our fragile products will be professionally wrapped in bubble wrap and packed with foam peanuts.We then mark your package as fragile so it comes to you as it left us! Welcome to DTS. Check out our other great items! We are always on the search for vintage/antique and unique ... moreitems to pass on to our customers. We offer high quality products at great prices! We always combine shipping for you! Email us to let us know you are still shopping. All of our glassware listed is in Mint condition unless other wise stated AND flaws will be pictured. Ohio is the glass capital so we are able to find top notch vintage glass here and offer great savings to you! We only accept returns when the product is grossly misrepresented in the Ebay details box. 14 days upon RECEIPT of product. Buyer pays shipping. Refund AFTER receipt of product
|
|
|
Lot of 2 L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA
Lot of 2 L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA In a clean condition. Come in original box 094514v15. All payments must be made via a vertified PayPay account. We prefer and inquire all of your customers to complete their transactions within 24 hours after the purchase. We guarantee a 1 day handling period after the transaction has been completed. Excluding holidays. We offer a 14 day warranty period. We ask our all of our customers to please contact us if there is absolutely anything unsatisfying about the purchase. We will gladly work with you to resolve any concerns. Honest. Customer service dedicated re-sale shop. We purchase most of our inventory from eveyday customers, garage sales and local auctions. All of our merchandise is always tested prior to sale to insure 100% satisfaction. Please do not hesitate to contact ... moreus anytime. We value your business and want to ensure the best service possible. We are available to answer all of your questions via eBay messaging Mon-Sat 9am-6pm.
|
|
 |