|
Lot of (9) DE-STA-CO 213 Horizontal Hold-Down Clamps Toggle 150 lbs
wi_finders USED IN PERFECT WORKING CONDITION. SOILED FROM STORAGE AND USE. MAY HAVE SLIGHT OXIDATION. STUDY THE PHOTOS. Product Description: Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Work holding applications. Their relative simplicity and design adaptability make them an indispensable member of the family of Work holding devices. Horizontal Hold-Down Clamps; Clamp Type: Horizontal Toggle Clamp; Holding Capacity: 150.00(Pounds) Base Type: Flanged; Bar Type: U-Bar; Handle Type: Straight; Material: Carbon Steel) Clamp Type Horizontal Toggle Clamp Holding Capacity(Pounds) 150.00 Base Type Flanged Bar Type U-Bar Handle Type Straight Material Carbon Steel Brand De-Sta-Co Clamp Type Horizontal Toggle Clamp Holding Capacity(Pounds) 150.00 Base Type Flanged Bar Type U-Bar Handle Type Straight ... moreMaterial Carbon Steel Overall Height(Decimal Inch) 1.3900 Overall Length(Decimal Inch) 4.1200 Height Under Bar(Decimal Inch) 0.7200 Length Distance Between Mounting Holes(Decimal Inch) 0.530 Width Distance Between Mounting Holes(Decimal Inch) 0.700 Base Length(Decimal Inch) 1.0000 Base Width(Decimal Inch) 1.0600 Handle Color Red Spindle Size 10-32x1.13 Handle Movement in Degrees 60 Front Of Base To Tip Of Toggle Bar(Decimal Inch) 1.4200 Spindle Travel(Decimal Inch) 0.8500 Mounting Hole Size Diameter(Decimal Inch) 0.1700 Bar Opening in Degrees 90 SUPPORT ADDRESS: R. Smith Engineering Company 3315 South Clement Ave. Milwaukee WI 53207 SHIPPING TO USA LOWER 48 STATES ONLY. Contact us before bidding about shipping outside of the US. We ship EVERYDAY when possible. Payment Within 5 Days Of Auction Close. Contact BEFORE Leaving Neutral Or Negative Feedback. Designated trademarks and brands are the property of their respective owners. Sellers are not responsible for service transit time. Transit times are provided by the carrier. Exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. o`7.RcmdId ViewItemDes
|
|
|
LOT OF 10 HOLD DOWN TOGGLE CLAMPS 500 POUND CAPACITY
LOT OF 10 HOLD DOWN TOGGLE CLAMPS 500 POUND CAPACITY LOT OF 10 HOLD DOWN TOGGLE CLAMPS 500 POUNDS CAPACITY You are bidding on a lot of 10 used toggle hold down clamps. Clamps do have some grime/saw dust on them but are in good. Working condition. Dimensions for the schematic are as follows: A = 6 3/4 inches B = 4 3/16 inches C = 1 1/4 inches D = 7/8 inches E = 1/2 inch for Position 1 F = 2 1/8 inches for Position 2.
|
|
|
DESTACO VERTICAL HANDLE HOLD CLAMPS- LOT OF 3 MISC CLAMPS (220)
DESTACO VERTICAL HANDLE HOLD CLAMPS- LOT OF 3 MISC CLAMPS(220) YOU ARE BIDDING ON A(N) DESTACO VERTICAL HANDLE HOLD CLAMPS- LOT OF 3 MISC CLAMPS(220) If not listed as new PLEASE make sure you understand the following They are from a working enviroment. They are untested and sold as-is. This means they may work fine they may not work at all. International buyers contact for shipping rates Please check out our other auctions. We have 1000's of items not listed yet so if you need something don’t hesitate to ask. We will be glad to check for you. Please contact us with any questions or to work out a package deal if you see more than 1 item you are interested in. We are always open to making you the best deals possible. We will entertain any offers! If you have any question please call 1-855-869-6191 Please check us out on Facebook and“LIKE” ... moreus! http:www.facebook.com/RCRecycling Thanks Again RC Resale Warehouse Location: W-14 LISTED BY: TINA*ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. IF YOU SEE AN ITEM WE HAVE LISTED PLEASE MAKE US AN OFFER* We gladly accept PayPal. Certified Funds, or Cash for local pickups. Shipping price shown is for shipping in the US to lower 48 states only. Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our hours are from 8am-5pm Eastern time. Contact us about combined shipping rates. All items come with a 14 day gurantee unless stated in listing. Buyer pays return shipping unless stated otherwise. NO RESTOCKING FEE. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that
|
|
|
JAMES MORTON Rite Hite machine hold-down work clamps (4) 1/2" dia
From a state surplus sale. Four James Morton Rite-Hite hold-downs, with extra rods. 1/2" diameter rods. Weight 7.9 lbs(Before packaging) Items ship from zip code 68512 in the U.S. Shipping costs quoted are to the continental states only. Anywhere else will be more. Payment is expected within 10 days. Otherwise I reserve the right to file for non-paying bidder,and re-list the item. SHIPPING-USPS: Please note that I am NOT responsible for the time the post office takes to deliver the package. Tracking numbers will show up in the'order details' section once I ship the item. SHIPPING-OTHER" If the shipping is'Other' then it is Fedex. Fedex does NOT ship to PO boxes. So please provide a"real" address. SHIPPING-COMBINED: I always do my best to combine multiple wins to save on shipping. I make full use of USPS ... moreflat rate boxes wherever possible. And will only charge you for one box if I can fit multiple wins in the same box. If you win more than one auction I will send you a new quote with new shipping. Also. I am happy to hold items for you if you plan on buying many items from me over time, in order to combine their shipping. This is at my discretion, for buyers with dodgy or low feedback. Contact me for details. FOREIGN BIDDERS: I am happy to send you a quote during the auction if you want to know how much it will cost. Items are declared as"Other: ebay" I will NOT mark them as'gift' I DO NOT under-declare item value on the invoice. Do not ask. SHIPPING- PACKING: I take packaging seriously. I know how fragile cast iron is. I use newspaper for small items. And packing peanuts only for very light items. I use a variety of bubble wrap and peanut-packs for most mid-size items. I do have costs associated with packaging materials, so please keep that in mind on the shipping amounts. Heavy items will be packaged using solid styrofoam block. It is very rare for the items I pack to be broken, as my feedback should attest. I do not notify the winner of when a package is ship
|
|
|
ALUMINUM JIG HOLD DOWN CLAMPS DE STA CO. CLAMPS
ALUMINUM JIG HOLD DOWN CLAMPS DE STA CLAMPS MOUNTED ON PRE DRILLED BLOCKS
|
|
|
MACHINIST HOLD DOWNS 5x.7x.4 inches TAPER EDGE CLAMPS PARALLELS *E
MACHINIST HOLD DOWNS 5x.7x.4 inches TAPER EDGE CLAMPS PARALLELS C ondition/I n fo: Good condition. Some staining All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. PAYMENT DUE WITHIN 3 DAYS OF AUCTION CLOSE. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment ... moreinsured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
SET OF 6 MACHINIST GUNSMITH CUSTOM MADE HOLD DOWN C & PARALLEL CLAMPS TOOLS *E
SET OF 6 MACHINIST GUNSMITH CUSTOM MADE HOLD DOWN C CLAMPS TOOLS C ondition/I n fo: The set of 4 hold work up to 1" thick. The parallels open up to 2" All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. PAYMENT DUE WITHIN 3 DAYS OF AUCTION CLOSE. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will ... morebe happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
6 NORTHWESTERN Machinist Lathe Slotted Hold Down Toe Edge Clamps Mill Tools
6 Machinist Lathe Hold Downs Northwestern Tools Inc. Dayton. Ohio The smallest pair are 2 3/8"x1 1/4"x5/8" and are slotted with the No. 25 S 58 on them. The middle pair are 4"x 1 1/2"x 3/4" and are slotted with No. 40 S 58 Northwestern Tools Inc.117 Hollier Ave. Dayton.Ohio on them. The largest pair are 4 1/8"x 1 1/2"x 7/8" and are slotted toe/edge clamps. They don't have makers mark on them but were with the Northwestern group and same style so imagine they are same brand. Also has allen wrench for adjusting clamp. Will gladly combine shipping on same day auctions. No Reserve Auction! Don't forget to check out our!
|
|
|
DESTACO 207 MANUAL HOLD-DOWN CLAMP & 2 DESTACO DRAW ACTION CLAMPS
DESCRIPTION: DESTACO 207 MANUAL HOLD-DOWN CLAMP& 2 DESTACO 351 DRAW ACTION CLAMPS.
|
|
|
UNUSED! LOT OF HOLD DOWN CLAMPS - #3 TO #6
aims UNUSED! LOT OF HOLD DOWN CLAMPS- 3 TO#6 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a Lot of UNUSED Hold Down Clamps. Model#s: 3& 6(others unmarked) Specifications: Bolt Threads Range: 3/8"16 tpi to 1/2"13 tpi. Throats Range: 3/8" to 5/8" Overall Lengths Range: 3-1/2" to 4-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has ... morea large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. UNUSED! LOT OF HOLD DOWN CLAMPS- 3 TO#6 Reliable Tool Inc. c 2011 | Powered by
|
|
|
(4) Four Horizontal Handle Hold Down Action Toggle Clamps on metal block
4) Four Horizontal Handle Hold Down Action Toggle Clamps on metal block Search Click to see supersized image Click to see supersized image Click to see supersized image Click to see supersized image Please see pictures for complete item details and specifications. No manuals. Cords/cables, or additional items are included if not listed or shown. If you experience a problem please contact us FIRST. We strive to do our best to work with customers to resolve issues. BRING item# 13-0418-13 WE COMBINE SHIPPING! BY BIDDING. YOU ACKNOWLEDGE YOU HAVE READ, UNDERSTAND, AND AGREE TO OUR TERMS OF SALE—ALL SALES ARE FINAL! Payment for items is expected to take place through PayPal and within 48 hours of the auction end date. Between auction end and the end of the payment period. BRING will hold the item in the interest of the winning bidder. However, ... moretransfer of ownership from BRING to the winning bidder does not take place until the payment has completed, and if payment has still not been completed after 4 days, it is BRING's sole discretion whether or not to re-list the item, offer it to the next highest bidder, or retain ownership. Additionally. If payment has not been received by the end of 4 days, an Unpaid Item Dispute will be posted to the buyers account. If payment has still not been received within 8 days from the auction end date, The Unpaid Item Dispute will become permanent on the buyers account. All items are shipped through USPS. When payment is completed by 1:00 PM Thursday. Items will ship that afternoon. Payments completed over the weekend will ship the following Monday afternoon. THIS IS IMPORTANT! We are a recycling facility! All items for sale have gone through our receiving and processing department. And are to be considered in used condition. As such, they may contain cosmetic and/or functional impairment. BRING Recycling will strive for thoroughness during pre-sale item inspection and attempt to accurately asses item functionality and condition. And to accurately relay this information through the
|
|
|
PAIR OF CARROLL & SHIPLEY HEAVY DUTY T-SLOT HOLD-DOWN CLAMPS
aims PAIR OF CARROLL& SHIPLEY HEAVY DUTY T-SLOT HOLD-DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Carroll& Shipley. This is a Pair of Heavy Duty T-Slot Hold Down Clamps in GREAT condition. Specifications: Clamp Length: 7-1/2" T-nut: 1" x 1-1/4" x 1/4" Clamp Width: 1-7/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently ... morehas a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF CARROLL& SHIPLEY HEAVY DUTY T-SLOT HOLD-DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
UNUSED! 9 HOLD DOWN CLAMPS - #5 - 1/2"-13 TPI
aims UNUSED! 9 HOLD DOWN CLAMPS- 5- 1/2"13 TPI read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. These are 9 UNUSED Hold Down Clamps. Model#s: 5 Specifications: Bolt Thread: 1/2"13 tpi. Throats: 1/2" Overall Lengths: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by ... morevisiting our page for more Great Deals! Bidding starts at a dollar with no reserve. UNUSED! 9 HOLD DOWN CLAMPS- 5- 1/2"13 TPI Reliable Tool Inc. c 2011 | Powered by
|
|
|
De Sta Co 235-U Toggle Clamps. Good neoprene hold down bolts. Smooth action.
12 Destaco 235-U Hold down clamps All in good condition Smooth action From a Woodworking shop If you can use a 235 for your project than this is a good offer. You will be satisfied with your purchace. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TWO 3F #4112 KANT-TWIST QUICK ACTING HOLD DOWN CLAMPS WITH BASES
This auction is for a pair[ two] of used KANT-TWIST 3F- 4112 quick acting hold down clamps with 1/4" base plates. These clamps are used for the drill press. Assembly molds, furniture, planners, vertical turrets, mills woodworking, plastic tooling, and all fixtures of all types. They feature a floating jaw that stays parallel with work, designed to eliminate distorting or twisting action, and copper plated jaws& screws are ideal for welding. Here is other information: 1.500 holding capacity Fixture Base- 2 11/16 x 2 1/4" also 1/4" thick base 2 3/4" x 2 1/4" Center distance between holes on base- 1 1/2" and 1.91" Height- 4 1/8" Range 0- 2 3/8" There is also a 1/4" plate base bolted to the fixture base which is roughly the same size and has a allen bolt. Washer and nut for mounting to surface. ... moreCombined weight of both clamps is 3lb.3.8oz. All my auctions are sold as found so please email all questions before bidding and thank you for looking. Because of weight I offer parcel post or priority mail[ or medium flat rate priority] so check the shipping calculator above for best option.
|
|
|
4 ARMSTRONG NO. 712 HOLD DOWN CLAMPS WELDING MACHINIST JIG FIXTURE SUPPORT
DESCRIPTION: USED. 4, ARMSTRONG NO. 712 HOLD DOWN CLAMPS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VIN
|
|
|
BRIDGEPORT MILLING TABLE T SLOT NUTS STUDS HOLD DOWN CLAMPS MACHINIST TOOLS *12
BRIDGEPORT MILLING TABLE T SLOT NUTS STUDS HOLD DOWN CLAMPS MACHINIST TOOLS Condition/I n fo/Sizes: Brands include Northwestern Tools Inc. Dayton Ohio and Tietzmann Tools Englewood Ohio. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Items must be won in the same week for a combined shipping discount. Notify me if you plan on bidding on multiple auctions. Payment due within 3 days of auction close unless other arrangements are made with me before the auction closes. Foreign buyers are responsible for all import duties and taxes. ... moreShipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! My auctions are your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13eeea6a449-0x102-
|
|
|
DESTACO 267-U HOLD DOWN CLAMPS (LOT OF 2) ~ USED
DESTACO 267-U HOLD DOWN CLAMPS(LOT OF 2) ~ USED THIS ITEM IS SURPLUS- BOX/ITEM MAY SHOW SIGNS OF DUST/ WEAR/ WRITING/ SCRATCHES/ GREASE FROM STORAGE. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value, or condition of any item. Do not assume anything about the item(s) included in this sale. We do not claim to be experts on any of the items that we sell. We do the best research we can and represent the item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications, we will do our best to answer them. Please note that we are a business open from 9AM to 3PM(EST) Monday-Friday. We are closed on weekends and nationally recognized holidays. To ensure a timely ... moreresponse to any questions you may have, please do not wait until the last minute to ask them. For questions or concerns contact 1-616-887-3572* Sales Tax: We Collect Sales tax in multiple states. Payment Options: PAYPAL or VISA/MASTERCARD. DISCOVER& AMERICAN EXPRESS(Call 1-616-887-3572) Your business is important to me. If there is any problem with your purchase or the transaction in any way please let me know. THANK YOU and HAVE A GREAT DAY! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
7 DE-STA-CO DESTACO MODELS: 2 #207, 1 #202, 4 #201 VERTICAL HOLD DOWN CLAMPS LOT
Here we have a 7 DE-STA-CO DESTACO MODELS: 2#207. 1#202, 4#201 VERTICAL HOLD DOWN CLAMPS LOT. Please see the pics for the exact item you will be recieving. ITEM comes AS-IS so please bid accordingly. Please bid confidently. Good Luck Bidding and Adding this item to your collection! Check out my other auctions for more vintage and unique items. So some good deals will be had. Most of my items come directly from my collection and put right on Ebay. My items are sometimes old and may need some cleaning. You never know what I may find or what might pop up! Feel free to ask any questions you may have about the item. Shipping or PAYMENT, as I will answer all questions as soon as I can. Shipping will be Calculated, I DO COMBINE SHIPPING WHEN WINNING MORE THEN ONE ITEM. Powered by The free listing tool. List your items fast and easy and manage your ... moreactive items.
|
|
|
HOLD DOWN CLAMPS NUTS STUDS BOLTS BRIDGEPORT MILLING TABLE MACHINIST TOOLS *13
HOLD DOWN CLAMPS NUTS STUDS BOLTS BRIDGEPORT MILLING TABLE Condition/I n fo: Plastic bins are not included. Miscellaneous smaller hardware The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for ... morea great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
4 AUTOSET SELF CENTERING HOLD DOWN CLAMPS
aims 4 AUTOSET SELF CENTERING HOLD DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. These are 4 Hold Down Clamps in good condition. Specifications: Lengths: 3-1/2" 4" Widths: 1-5/8" 2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 AUTOSET SELF CENTERING HOLD DOWN CLAMPS 4 AUTOSET SELF CENTERING HOLD DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
JERGENS No. 901 Hold Down Clamps SET OF FOUR FOR MACHINIST TOOLS LATHE MILL
JERGENS No. 901 Hold Down Clamps SET OF FOUR FOR MACHINIST TOOLS LATHE MILL. 4" Long. 3/4" Thick, ID 3/4 x 1 1/2" This will ship USPS Priority at $5.35 and arrive within 3 days of shipping. No Reserve
|
|
|
ARMSTRONG MACHINIST HOLD DOWN CLAMPS MILL GRINDER FABRICATION SETUP 712 713
DESCRIPTION: USED. 2, ARMSTRONG NO. 712 AND 1, NO. 713 CLAMPS. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY A
|
|
|
Mitee Bite T-Slot Hold Down Clamps--Machinist Tools
Up for auction is a set of four like new Mitee Bite T-Slot hold down clamps for use in a milling machine. These look to be unused.
|
|
|
LOT OF SAMSONS AND OTHERS HOLD DOWN CLAMPS
aims LOT OF SAMSONS AND OTHERS HOLD DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Samsons and Other Manufacturers. This is a lot of Hold Down Clamps in good condition. Specifications: Lengths: 3-3/4" 4" Widths: 1-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF SAMSONS AND OTHERS HOLD DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
9 VULCAN AND OTHERS HOLD DOWN CLAMPS
aims 9 VULCAN AND OTHERS HOLD DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Vulcan and Other Manufacturers. These are 9 Hold Down Clamps in good condition. Specifications: Lengths: 4" to 10" Widths: 1-3/4" to 2-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 9 VULCAN AND OTHERS HOLD DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f3d14d6cc-0x105-
|
|
|
U.S.A!! 4 RITE HITE ADJUSTABLE HOLD DOWN CLAMPS
aims U.S.A! 4 RITE HITE ADJUSTABLE HOLD DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by James Morton. These are 4 Rite Hite Adjustable Hold Down Clamps in good condition. Rugged forged steel pivot clamp. Provides instant height adjustment without blocks or shims. One-piece assembly allows quick setup and eliminates lost clamp pieces. Turn clamp 90� in either direction for loading clearance. Specifications: Clamp Dimensions: 1-3/8" x 5-5/8" Stud Size: 1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at ... morea dollar with no reserve. U.S.A! 4 RITE HITE ADJUSTABLE HOLD DOWN CLAMPS U.S.A! 4 RITE HITE ADJUSTABLE HOLD DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
2 USED CARR LANE clamps Model CL-350-PA Hold Down locking clamp
Hello and thank you for visiting. You are looking at the following: 2 USED CARR LANE clamps Model CL-350-PA Hold Down locking clamp. This is a working unit. Fully functional condition. Thank you! NOTE: Free shipping to the contiguous USA only! lower 48 States)
|
|
|
JERGENS #901/VULCAN #54/ARMSTRONG #74 Hold Down Clamps MACHINIST TOOLS MILL
JERGENS#901/VULCAN#54/ARMSTRONG#74 Hold Down Clamps MACHINIST TOOLS MILL Set of 7. 5 x 4" clamps. 2 step clamps 3 1/2 Armstrong& 6" Sampsons Grip. These will ship USPS Priority and arrive within 3 days of shipping. NO RESERVE
|
|
|
DESTACO HOLD DOWN CLAMPS, 267-U, LOT OF 2, DE STA CO
Both are in good condition. Model 267-U. See link for more info
|
|
|
Hold down clamps lot 6 (All American Bushing Co.)
4 used hold down clamps. Measure 7" closed, 9" open. Weight: 10 lbs total Lot 6 We have 4-5 similar listings for other lots
|
|
|
LUFKIN RULE CO. No. 902D HOLD DOWN CLAMPS 5" MACHINIST TOOLS *G
LUFKIN RULE CO. No. 902D HOLD DOWN CLAMPS 5" MACHINIST TOOLS*G Condition/I n fo: Some scratches tools marks but nothing too bad. This week I am selling many Starrett tools in excellent condition. Payment due within 48 hours of auction close. If you are bidding on other auctions contact me for a payment extension. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs ... moredo NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
STARRETT No. 54 HOLD DOWN CLAMPS 4 inch MACHINIST TOOLS *G
STARRETT No. 54 HOLD DOWN CLAMPS 4 inch MACHINIST TOOLS*G Condition/I n fo: Beautiful condition. NO engraving or personal markings, these appear unused. This week I am selling many Starrett tools in excellent condition. Payment due within 48 hours of auction close. If you are bidding on other auctions contact me for a payment extension. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and ... moretaxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Lot of (3) Used De-Sta-Co 210U Vertical Handle Hold Down Clamps w/ Flanged Base
Lot of(3) Used De-Sta-Co 210U Vertical Handle Hold Down Clamps w/ Flanged Base Used. In great condition, see pictures above for more details. Please feel free to contact us with any questions. We combine shipments to lower customer costs. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer Thanks for looking.
|
|
|
LOT Machinists Milling Mill Table Hold Down CLAMPS Brackets Clamping T-Slot
tigspt's Unique Estate Finds Machinists tools This auction is for a big lot of vintage milling mill table machinists hold down clamps/brackets/t nuts/bolts/slots. View photos to see what you will receive. Please see my other auctions for more cool vintage finds. Happy bidding! Seller's Note: I try to describe my items to the best of my ability based on my perception and scale of condition. Since I sell mostly estate/garage sale items. I am no expert. If you have any doubt please ask questions before auction ends. It is the responsibility of the buyer to read the auction completely and understands that by placing a bid. You are agreeing to the conditions of sale. Payments are expected 7 days after the auctions ends. If I don't hear from you. I will start the Non-paying bidder process on Day 8. I accept PAYPAL ONLY for all purchases. ... morePer Ebay policy. Once your payment is received, I ship within the next 24 hours or less. Shipping: I ship via USPS with FREE delivery confirmation. International: I ship to most places through Priority Mail International ONLY with FREE Delivery Confirmation. I do not ship first class. I fill out ALL custom forms accurately. Feedback is important to me so.Once your purchase has reached you in good condition and you are satisfied. Please leave 5 Star feedback for me and I will do the same. Check out my other listings at. Powered by Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 2 Vintage Central States Vertical Hold Down Toggle Clamps 91331
Lot of 2 Vintage Central States Vertical Hold Down Action Toggle Clamps. 91331, Great Condition! This is a pair of very nice toggle clamps labeled Central States. They are stamped 91331 on the side. The handle measures approx. 5-1/2 inches tall. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NORTHWESTERN heavy duty hold down CLAMPS for milling setups
Two northwestern heavy duty milling setup hold down clamps. Posted with
|
|
|
Lot of CNC Hold Down Clamps
Lot of CNC Hold Down Clamps You are bidding on a lot of CNC hold down clamps. What you see in the photos is what you are bidding on Note: The eBay"Item Specifics" Detailed Item Info" are not always correct. To anyone who purchases from me. The Item specs above is the correct info! If it is not stated in the listing or pictured it is not included. Note: I only sell items for an IT client. I am not a IT tech and do not provide tech support. It is up to you to research to see if this software or hardware will work for your application. NO CANADA or Puerto Rico. NO INTERNATIONAL SHIPPING. PLEASE DO NOT ASK! A ll shipping costs set by E Bay through the shipping calulator and are based on the destination. Size and weight of the item! The shipping costs are non- negotiable Payment options When the auction closes. I will invoice you ... morefor the purchase. You have five(5) business days from the date of auction closing to pay for your item. If you have a question about an item. Shipping or payment terms, please contact us through Ebay. If we have not received payment or received communication from the buyer within five(5) days of auction closing. We will consider the buyer a non-paying bidder be reported to E Bay as a nonpaying bidder and the relist the item. Our preferred method of payment is Paypal. Warranty/ Returns/Refunds I offer a(5) day DOA warranty with your purchases unless listed"As-Is" You have five(5) days upon arrival of your item to return to us for a full refund minus shipping costs. The customer pays the return shipping and when the item is returned a refund of the cost of the item will be refunded and not the initial shipping cost to the customer. Shipping Information The E Bay shipping calculator calculates the shipping costs based on destination. Size and weight. The shipping costs are non- negotiable and non– refundable. If a item is damaged during shipping. Please inform me immediately and I will file a damage claim with the shipper. If you are local. In the Milwaukee, Racine or Ke
|
|
|
DE-STA CO. HOLD-DOWN CLAMPS 603 & 607
HELLO! UP FOR SALE ARE THESE HOLD-DOWN CLAMPS BY DE-STA COMPANY. INCLUDED ARE: TWO#603 CLAMPS(SIZES 5 AND 6) ONE#607 $ FREE SHIPPING $ ALTHOUGH ONE THE 607 APPEARS TO BE MISSING A RUBBER PIECE ON THE BACK. THESE CLAMPS ARE IN OTHERWISE FAIR CONDITION TO BE USED ONCE AGAIN. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANKS FOR LOOKING! Check out my! Be sure to add me to your!
|
|
|
2 ADJUSTABLE HOLD DOWN CLAMPS
aims 2 ADJUSTABLE HOLD DOWN CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 Adjustable Hold Down Clamps in good condition. Specifications: Clamp Dimensions: 3-1/2" x 7" x 1-1/2" Stud Size: 7/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 ADJUSTABLE HOLD DOWN CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Lot of 10 Hold down toggle clamps 500 lbs pound capcity
Lot of 10 Hold down toggle clamps 500 lbs pound capcity 500 POUND CAPACITY You are bidding on a lot of 10 used toggle hold down clamps. Clamps do have some grime/saw dust on them but are in good working condition. Dimensions for the schematic are as follows: A = 6 3/4 inches B = 4 3/16 inches C = 1 1/4 inches D = 7/8 inches E = 1/2 inch for position 1 F = 2 1/8 inches for position 2 Email or call 920-684-9999 w/questions PLEASE READ PRIOR TO BIDDING You are buying the above as is(If you are not sure what that means. Look it up AS IS) This means don't assume anything. If you have a question, ask. If it is not listed as NEW, then don't assume that it is.It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please ... morecall/ email us and we will make every attempt to do so. However, please understand that our business is rigging and we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel that positive feedback should be mutually reciprocated. Lastly, if you try to threaten use of negative feedback to get something that was not listed or a service that was not listed, we will forward the request to EBAY without notice.
|
|
|
Lot of Milling Clamps Hold Downs, with T-Slot Nuts, for 3/4 inch Slot Machine
I do a little milling for fun. I bought these at an auction many years ago. But they are too big for my machine. The T-slot nuts are 11/16 wide, so I assume they are designed to use in a machine with 3/4 slots. They have a total height of 1 1/8(5/8 for the narrow part and 1/4 for the bottom wide part) and width of 1 1/8. The clamps that they are assembled with are 3 inches long. As you can see you get 3 of these assemblies. If I take these apart I can squeeze everything into a small flat rate box. You also get: 2 tapered clamps(nice) 1 thick 45 degree clamp and 17 rectangular clamps. some of which are threaded for 3/8-16 bolts and some are just drilled) Let me know if you need further information. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 Vintage LSS Starrett Mini Clamps Vises Machinist Hold Down Tool
2 Vintage LSS Starrett Mini Clamps Vises Machinist Hold Down Tool Up for auction today is are 2 STARRETT mini machinist clamps marked THE LSS CO ATHOL. MASS. I do not know the proper name for these clamps. They are different so look at the photos. There is an countersunk hole in the bottom that tells me they screw down to a bench. Please see photos to determine condition and ask questions as needed. Winning bidder agrees to pay $ 4.00 for shipping and handling which includes delivery confirmation but not insurance. NEVER A RESERVE Please read information below before bidding. I thank you for viewing my item and good luck with your bid. My aim is to always fairly represent the item’s condition and what the item is. I will do this by providing a description and pictures to the best of my ability. The pictures are an important part of the description ... moreso please look carefully. If you have information about this item in contrary to what I stated please let me know and I will correct it. If I have one. I will state the history of the item as conveyed to me. Since all the items I sell were purchased used and may have had many owners, I will never know all the history as far as the environment they were kept in. The items I sell are vintage or older and normal wear is to be expected. And will often enhance its beauty and value. Communication and understanding is essential to ensure a mutually satisfying transaction. So please e-mail me for any clarification of description needed or more photos. All items are sold as is with no returns. Please be certain of what you are bidding on before you bid. Please look at my feedback and know you can bid with confidence. Payment is expected with PayPal within 5 days of auction close. If payment is not received within this period. You will forfeit the item to the backup bidder unless we make other arrangements. All items will be shipped within 3 business days of receipt of payment. Unless other arrangements are made(I sometimes need an out of town vacation) Shipping will be USPO
|
|
|
PAIR OF JORGENSEN E-Z HOLD BAR CLAMPS # 3422
aims PAIR OF JORGENSEN E-Z HOLD BAR CLAMPS# 3422 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Jorgensen. These are 2 Bar Clamps in good condition. Specifications: Jaw Max. Capacities: 22" Approx) Bar Dimensions: 1/4" x 3/4" Throats: 3" Overall Lengths: 28. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF JORGENSEN E-Z HOLD BAR CLAMPS# 3422 Reliable Tool Inc. c 2011 | Powered by
|
|
|
Set of Machinist Clamps Hold Down Set Up milling workholding parting tool holder
DESCRIPTION MOST OF MY MACINIST PARTS HAVE SOME RUST Please look at pictures carefully The contents of what you are purchasing will consist of exactly what is pictured unless otherwise specified. If it is not included in the pictured then it does not come with the item that you are bidding on unless noted in the description above. I STRIVE TO BE A 5-STAR SELLER. IF THERE ARE ANY PROBLEMS WITH YOUR ORDER PLEASE LET ME KNOW IMMEDIATELY SO I CAN MAKE THINGS RIGHT AND EARN YOUR 5-STAR FEEDBACK RATING. RETURN POLICY RETURNS ACCEPTED WITHIN 30 DAYS OF RECEIVING ITEM. PAYMENT Please pay within 7 days of purchasing. SHIPPING(United States) Orders will be shipped within 3 days or placed order although items usually ship next day. Alaska and Hawaii residents: My shipping rates are set high for you to cover myself for heavier items. If you are interested ... morein any of my items contact me and I will try to give you a better shipping cost. NOTE: ORDERS MAY BE SHIPPED THROUGH USPS OR UPS SHIPPING(International) International Customers(Outside USA) My international shipping costs are set high so if you want to buy this item contact me and I will calculate the actual shipping cost and adjust the price for you accordingly. Disclaimer: Our products generally come from surplus and liquidation auctions. We claim no affiliation with the manufacturers of our products. Safety and any other technical or general questions should be taken up with them. Lot 121511mw33 CRATE 3100 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
te-co and Vulcan hold down clamps, step blocks milling setups for Bridgeport
Vulcan and te-co Setup blocks and hold down clamps milling setup blocks. Posted with
|
|
|
GAC Adjustable milling Table Clamp Set vintage machine hold down clamps
vintage milling table clamps. let me kno which size t slot bolts u need. I'll include it for free if i have some in my bin of tools. MADE BY: General Alliance Corp. San Diego California.
|
|
|
12pc Lot Mixed Size Destaco Hold Down Clamps
Welcome! Up for sale is a 12pc Lot Mixed Size Destaco Hold Down Clamps. Used in good condition. Feel free to email any questions! SCT2605
|
|
|
CLAMPS 3"&4" quick grip squeeze spring woodworking vise GRIP TRAINING hold down
9 total. 7-6" and 2-3" the black ones are QUICK GRIP. The chrome are unmarked. they all work great, very tight. thanks for looking, please see my other items. USA SHIPPING ONLY.
|
|
|
CARROLL & SHIPLEY MACHINIST HOLD DOWN CLAMPS MILL GRINDER FABRICATION SETUP
CLAMP OR HOLD DOWN SET CARROLL& SHIPLEY MFG STEEL KNUCKLE LOOKING HOLD DOWN CLAMPS T-SLOT BOLT FOR HOLD DOWN VINTAGE SET IN AWESOME CONDITION 6" LONG x 2.5" WIDE x 2.5" HIGH PLEASE SEE ALL PICTURES FOR DETAILS THANKS FOR LOOKING MADE IN THE USA On Oct-06-13 at 17:56:24 PDT. Seller added the following information:
|
|
|
WALTER W FIELD & SONS MACHINIST HOLD DOWN CLAMPS MILL GRINDER FABRICATION SETUP
CLAMP OR HOLD DOWN SET WALTER P FIELD& SONS INC T-SLOT BOLT FOR HOLD DOWN VINTAGE SET IN AWESOME CONDITION 3.5" LONG x 3.5" WIDE x 3.5" HIGH I BELIEVE YOU CAN CLAMP PIECES UP TO 1.5" WIDE WITH THE CLAMP PLEASE SEE ALL PICTURES FOR DETAILS THANKS FOR LOOKING MADE IN THE USA On Oct-06-13 at 17:56:27 PDT. Seller added the following information:
|
|
|
U.S.A! LOT OF ASSORTED DE-STA-CO HOLD DOWN TOGGLE CLAMPS
aims U.S.A! LOT OF ASSORTED DE-STA-CO HOLD DOWN TOGGLE CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by De-Sta-Co. This is a Lot of Assorted Hold Down Toggle Clamps in good condition. Some Model#s are: 305-U. 603501, 607, 270 Flanged or straight base versions. Available with Toggle Lock Plusr feature. Adjustable pre-load. Large handle clearance. Specifications: Clamp Arm Lengths Range: 1" to 12-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! LOT OF ASSORTED DE-STA-CO HOLD DOWN ... moreTOGGLE CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF ASSORTED DE-STA-CO NO. 225U VERTICAL HOLD DOWN TOGGLE CLAMPS
aims LOT OF ASSORTED DE-STA-CO NO. 225U VERTICAL HOLD DOWN TOGGLE CLAMPS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by DE-STA-CO. This is a Lot of Vertical Hold Down Toggle Clamps in working condition. Model# 225 Features& Specifications: Heavy duty vertical hold down clamp offers bar guide feature for lateral stability. Clamp Arm Length: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED DE-STA-CO NO. 225U VERTICAL HOLD DOWN TOGGLE CLAMPS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Pair of Wilton No. 171000 Hold Down Machinist Clamps 4 1/2 Inches Long
Pair of Wilton No. 171000 Machinist Clamps 4 1/2 Inches Long Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: There is
|
|
|
5 DE STA CO MODEL No.215-U Hold Down Action Toggle clamps
FOR SALE SET OF FIVE MADE IN USA DE STA CO CLAMPS MODEL 215 U ONE IS BRAND NEW. FOUR ARE USED LOOK AT THE PICTURES. WHAT YOU SEE IS WHAT YOU WILL GET Item specifics Brand: DE-STA-CO Item: Toggle Clamp MPN: 215-U Includes: 202208-M Spindle(1) 215105 Flanged Washer(2) SKU: G1963227 Handle: 90 Degrees Base Mounting Centers(In. 1.00 x 0.88 Arm: U-Shaped Height Under Arm(In. 1.00 Dia. In. 0.20 Overall Height(In. 1.53 Holding Capacity(Lb. 200 Overall Length(In. 5.50 Spindle: Flat Cushion Neoprene Thread Size: M6 THIS IS NOT MADE IN CHINA ITEM IS USED AND SOLD AS IS GUARANTED TO BE AS DESCRIBED. RETURNS FOR DOA. NO INTERNATIONAL BUYERS BUYER WILL PAY FIXED $10.00 FOR SHIPPING AND HANDLING ITEM WILL BE SHIPPED WITHIN CONTINENTAL USA NEXT DAY UPON PAYMENT. PAYPAL ONLY THIS IS NO RESERVE LISTING.
|
|
|
DOUBLE ACTION HOLD DOWN CLAMPS~TOOLMAKER MACHINIST
Normal 0 false false false EN-US X-NONE X-NONE Double action hold down clamps- four CL 15 SAC- 3 1/8" x 1 3/8" x 1/2" Weight of all four 2 lbs. 3 oz. Some rust. Please ask any questions you may have before bidding. Listing items for a friend who had his own machine shop. I know nothing about the items. But will do my best to answer your questions. Please look closely at the photos for condition. He takes good care of his tools. Questions on items- If you have any questions. Please ask before bidding. I check my account regularly when I have listings. Smoke– All items are from a smoke free environment. If I happen to purchase something from a sale that has a smoke odor. I'll mention that in the listing. Pets– None in my home. Please notify me within two days of receipt of item if you need to return it. Shipping– I try to ... moreship within two days of receiving your payment. I generally ship using United States Postal Service. I estimate shipping charges using the UPS calculator and add a small amount to help cover the cost of packaging tape and padded envelopes. Boxes I usually get for free. I’ll combine shipping charges upon request. Satisfaction– Please let me know if you are not satisfied with your purchase. I try to describe the items accurately. But there’s a chance I might miss a flaw. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
4 used DE-STA-CO Fixture CLAMPS hold down (2) 207 (2) 217-U (E-27)
4 used DE-STA-CO Fixture CLAMPS hold down(2) 207(2) 217-U(E-27) Lot of 4. Used. DE-STA-CO Workholding Clamps 2 are#207 2 are# 217-U used As Shown Happy to combine shipping when possible. Buyer pays Shipping and handling. VISIT OUR EBAY STORE: Click Images to Enlarge Shipping Costs will be paid by buyer. Payment Methods Accepted: Paypal(preferred) Note International Buyers: All customs forms are filled out honestly. We are a business who ships merchandise. Not Gifts! We are happy to have your business but all buyers expect us to be honest in our listings, They should also expect honesty on official paperwork. inkfrog terapeak. InkFrog Analytics.
|
|
|
HOLD DOWN CLAMPS, STRAPS, MACHINIST TOOLS
Normal 0 THREE U.S.A. MADE HOLD DOWN STRAP CLAMPS. IN EXCELLENT CONDITION. THEY ARE 6” LONG X 2-3/16” WIDE X.900” THICK. SLOT IS 4-9/16” X 11/16” ROUND END IS 3/4" DIA. ALL MEASUREMENTS ARE APPROXIMATE. Normal 0 PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment.
|
|
|
Lot of 5 De-Sta-Co Model 235-U Hold Down Clamps One Price
5 De-Sta-Co Model 235-U Hold Down Clamps. 750 lb per foot hold down capacity for each clamp. Applications: Assembly. Checking fixtures. Welding. Closures. Woodworking. I bought a bucketful of these from the woodworking shop whose owner was retiring. I only need a few so I am selling the rest. The shop had made most of the wood related items for Yankee Candle for many years. These are heavy duty clamps and are all in good working condition. As seen in pictures. NO RESERVE
|
|
|
Lot of 14 De-Sta-Co Model 235-U Hold Down Clamps
ALL ARE IN PERFECT WORKING CONDITION NO ISSUES OF ANY TYPE.
|
|
|
Chick Workholding Vise Hold Down Clamps
Chick Workholding Vise Hold Down Clamps. Set of 4 Good used condition. Measure 1.575" x 1.375" x 0.900" Counter bore for 1/2" bolt. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143a611e03a-0xf7-
|
|
|
MACHINIST TOOL LATHE Lot of Machinist Parallel Clamps for Set Up Hold Down
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
Carr lane hold down clamps, vertical toggle
6 Hold down clamps a couple new a couple used. Carr lane cl-1050 vct Check my other auctions for more holddown clamps
|
|
|
5/8" Hold Down Studs Tee Slot Nuts / Hold Down Clamps
These Tee Nuts. Studs, Clamps are all 5/8" Threads 5/8-11 threads. Look at the 5/8 Nuts are in very nice shape, not dished out like heavily used ones. 6 of the Tee nuts 13/16" wide at top, 1 1/4" at foot and 1 1/2" long 5/8-11 threads. NOTE 1 Tee nut off to the side is 3/4-10 thds. 37 pieces. Thanks For Looking. E-mail with questions.
|
|
|
Hold Down Clamps 5/8" / Step Blocks
These hold downs are for 5/8" or 3/4" Slots are 13/16" x 3 1/8" long. 1" thick. 5 Total only 4 are pictured. It is as nice as the ones pictured. Step blocks are also nice there is a chip in one of the teeth tall block. So you will receive 9 pieces total. Thanks For Looking. E-mail with questions.
|
|
|
Hold Down Clamps 1" / Step Blocks
These hold downs are for 1" Slots are 1 3/16" x 3 1/8" long. 1" thick. 5 Total only 4 are pictured. It is as nice as the ones pictured. Step blocks are also nice there is a chip in one of the teeth tall block. So you will receive 9 pieces total. Thanks For Looking. E-mail with questions.
|
|
|
Hold down clamps, Squeeze clamps, Mixed used clamps
Miscellaneous used clamps Check my other auctions for more clamps new and used.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1440c5f3389-0xd7-
|
|
|
Combination Hold Down Clamps (bench Dogs) Lot
This is a lot of hold down clamps that I believe are used on workbenches. I am not familiar with the brand or style of the clamps only that they came from an extensive woodworking collection. Please see photos carefully for clarification of what is included in this lot. Posted with
|
|
|
LOT OF 6 MACHINIST CLAMPS HOLD DOWN STARRETT 161 OTHERS
Two Starrett others USA clamps the Starrett is 161-D and the little bench clamp. Check out my!Be sure to add me to your!
|
|
|
2 Nice HITE RITE USA made 525L Adjustable Milling Machine Hold Down Clamps
This sale is for a pair(2) Nice used HITE RITE USA made No. 525L Adjustable Milling Machine Hold Down Clamps. The clamps are used so have marks and scratches from normal use please see photographs for detail. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability ... moreof the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the u
|
|
|
Destaco No.548 Hold Down Toggle Clamps Capacity 2500 Lbs. Vertical Handle
Description Excellent used Destaco No. 548 Hold down toggle clamps Capacity 2500 Lbs. Handle Vertical Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground ... moreand USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sales outside of the USA are"AS IS" and
|
|
|
LOT of 4 FIXTURE CLAMPS machinist machine shop jig tool table hold down
4 good used fixture clamps 1/2" X 1" X 2" please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 2 DE-STA-CO 604 Threaded Body Straight Line Hold Down Clamps 1330N 300lbf
Lot of 2 DE-STA-CO 604 Threaded Body Straight Line Hold Down Clamps 1330N 300lbf From our inventory. We are selling a Lot of 2 DE-STA-CO 604 Threaded Body Straight Line Hold Down Clamps 1330N 300lbf. Specifications: Model# 604 More Information: Travel: 1 1/2" Maximum Holding Capacity: 300lbf 1330N Type: Straight Line Body: 1" Thread Plunger Thread: 5/16"18 ST8-3-T 2 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: ... more2 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-57
|
|
|
4 TOGGLE CLAMPS fixture machinist vertical hold down 200 lb per DE STA CO # 202
Set of 4 Toggle Clamps De Sta Co USA#202 200 Lbs Capacity per Clamp Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Double Action Edge Counter Milling Machine Hold Down Clamps, Model 101B
J& S Tool Double Action Edge Counter Clamps. Model 101B You no longer need to use improvised and haphazard stops and locating devices. The counter clamp. A J&S exclusive, assures a reliable, standardized alternative. IN and DOWN adjustable clamping action is provided at both ends of the work piece insuring that the work-piece will be totally stabilized during the full matching operation. Are constructed from hardened and blackened steel. A special process designed to retard breakage and prevent flaws Will combine orders to reduce shipping cost. Ask for Invoice before paying
|
|
|
2 Double Action Edge Counter Milling Machine Hold Down Clamps,
2 hold downs 4" and a 6" both have 3/4 hole good shape
|
|
|
Wolverine-Lapeer Hold Down Toggle Bar Clamps CQ 915A Vertical Hold Down-2750 Lb
Description Excellent used Wolverine-Lapeer Vertical Hold Down-Toggle Bar CQ 915A 2750 Lb Capacity Flange Base-Solid Toggle Bar. Qty. 2 Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping ... morecarriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sales outside of
|
|
|
2pc Set J&S 101A 1/2 Ton Low Grip Jaw Clamps Mill Hold Down 3/4" x 1-1/2" x 3/12
Up for sale here is a 2pc Set J&S 101A 1/2 Ton Low Grip Jaw Clamps Mill Hold Down 3/4" x 1-1/2" x 3/12" USA. Used in good condition. Made in the USA. Feel free to ask any questions. SCT3565a
|
|
|
2 JAMES MORTON RITE HITE HOLD DOWN CLAMPS-MACHINIST-LATHE-TOOL DIE-OLD TOOLS
UP FOR BID I HAVE 2 JAMES MORTON RITE HITE SELFADJUST HOLD DOWN CLAMPS. THESE ARE CAST IRON CLAMPS. THEY MEASURE 5 1/4" LONG. THERE IS A PIVETING BLOCK ON TOP. THESE CLAMPS ARE IN GOOD CONDITION WITH NO CRACKS OR CHIPS IN THEM. PLEASE LOOK OVER ALL PICTURES FOR A FARTHER DISCRIPTION. IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANKS FOR LOOKING AND HAVE A NICE DAY.
|
|
|
(2) KNO-VISE H-600 HOLD DOWN CLAMPS
2) KNO-VISE HOLD DOWN CLAMPS#H-600, GOOD CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5684 2# WE SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours to keep. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 VTG WILTON 171010 HOLD DOWN CLAMPS-MACHINIST-LATHE-TOOL DIE-OLD TOOLS
UP FOR BID I HAVE 2 WILTON SELFADJUST HOLD DOWN CLAMPS. THESE ARE CAST IRON CLAMPS. THEY MEASURE 5 1/2" LONG. THERE IS A PIVETING BLOCK ON TOP AND A PIVETING PIECE OF ALUMINUM ON BOTTOM. THESE CLAMPS ARE IN GOOD CONDITION WITH NO CRACKS OR CHIPS IN THEM. PLEASE LOOK OVER ALL PICTURES FOR A FARTHER DISCRIPTION. IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANKS FOR LOOKING AND HAVE A NICE DAY.
|
|
|
SOLID ALUMINUM JIG FIXTURE W/ QUICK RELEASE CLAMPS HOLD DOWNS FENCE METAL WOOD
DESCRIPTION: USED. MACHINE SHOP MADE JIG. THE MAIN PART IS MADE OUT OF ALUMINUM. THE CLAMPS ARE STEEL. THE BASE MEASURES 34 X 4 X 13/16 THICK APPROX. THE FENCE SECTION MEASURES 15 5/16 X 2" HIGH APPROX. THE DISTANCE BETWEEN THE OPEN CLAMP AND FENCE IS 2 3/8 APPROX. THE CLAMPS ARE QUICK RELEASE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE ... moreDESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gi
|
|
|
SET OF 3 MACHINIST HOLD DOWN CLAMPS fixture clamp work holding tool WF 939 X-458
Set of 3 Hold Down Clamps Marked WF X-458# 939 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Chick Workholding Vise Hold Down Clamps With T Slot Nut and Screw
Chick Workholding Vise Hold Down Clamps With T-Slot Nut and Screw Set of 4 clamps measure 1.575" L x 1.385" W x 0.905" H T-slot nut measures 1.125" x 1.00" x 0.625" Cap screws are 1/2"
|
|
|
2 VERTICAL HOLD DOWN CLAMPS machinist holding tool 500 lb cap DE STA CO 207 L
2 Vertical Hold Down Toggle Clamps De Sta Co USA#207 L 500 Lbs Capacity Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GIANT LOT of NORTHWESTERN TOE CLAMPS STEP BLOCKS MILLING TABLE HOLD DOWNS *G
GIANT LOT of NORTHWESTERN TOE CLAMPS STEP BLOCKS MILLING TABLE HOLD DOWNS info/sizes: Over 55 pounds of clamping hardware! All blocks are toe clamps are from Northwestern. The largest step blocks measure 5 1/2 x 3 1/4 x 1 1/2. The bolts are 1/2" T-Nuts and T-Nut head bolts by Armstrong& OK. I will ship this in three Priority Mail Flat Rate Boxes so you will get them FAST! I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the ... moreauction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
2, QUICK RELEASE HOLD DOWN CLAMPS MACHINIST JIG FIXTURE
DESCRIPTION: USED. 2, QUICK RELEASE HOLD DOWNS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ... moreITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOLS
|
|
|
Qty4 DESTACO 210-U & 202 vertical hold down toggle action clamps 4pc lot
Qty4 DESTACO 210-U& 202 vertical hold down toggle action clamps for sale. 4pc lot. You get Qty2 model 210-U clamps. And Qty2 model 202 clamps. These clamps are lightly used and shown just as I found them. Nothing is bent, all the pivot points/rivets are tight, and the rubber pads and handles are in good condition. Please look at the listing pictures for condition. 210-U clamps- 600 pound clamping force. 3.63" horizontal arm length, and 1.67" height clearance under arm bar. 202 clamps- 200 pound clamping force. 2.31" horizontal arm length, and 0.93" height clearance under arm bar. Your order will be shipped via FREE USPS Priority Mail. My official Ebay handling time on orders is 2 business days. But almost all my orders are dropped off at the Post Office the next business day. I will send you a confirmation message ... moreafter processing your order, and I will post a tracking code on Ebay for you to follow. Thanks for looking. Please have a look at my other listings.
|
|
|
MACHINIST TOOLS LATHE MILL Rite Hite Hold Down welding t-slot Clamps for Set Up
LENZKES CF-20 Clamping pressure to 70 kN. Vertical and step-less adjustment. To prevent damage to the machine table all clamping frames come complete with a pivoting pressure plate. Delivery with T-nut. Clamping surface finely milled. Delivery includes: Clamping frame. Pressure plate and fixing bolts. Material: Clamping frame constructed from quality steel. The listing is for 2 clamps. As pictured
|
|
|
MACHINIST TOOLS LATHE MILL LENZKES Hold Down welding t-slot Clamps for Set Up
MACHINIST TOOLS LATHE MILL Rite Hite Hold Down welding t-slot Clamps for Set Up. LENZKES CF-10 Clamping pressure to 90 kN. Vertical and step-less adjustment. To prevent damage to the machine table all clamping frames come complete with a pivoting pressure plate. Delivery with T-nut. Clamping surface finely milled. Delivery includes: Clamping frame. Pressure plate and fixing bolts. Check out my! Be sure to add me to your! Material: Clamping frame constructed from quality steel. The listing is for 2 clamps. As pictured.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14590bc82cd-0x118-
|
|
|
9 Assorted Kant Twist & Hold Down Clamps
You are bidding for: 9 Pcs. Assorted Kant Twist& Hold Down Clamps As Follows: 2 Kant Twist 6" 1 Kant Twist 3" 2 Kant Twist 2" 3 Kant Twist 3F hold down clamp 1 Pcs. Enco 4 1/2" These are used but in excellent condition Buyer pays shipping Shipping cost for USA. Only Please look at pictures Look at my other listings for more clamps" Posted with
|
|
|
LOT OF CLAMPS ACME DIE STOP, Clamp-Rite Horizontal DESTACO CLAMPS HOLD DOWNS
HELLO AND WELCOME TO MY AUCTION. OVER THE NEXT FEW DAYS I WILL BE LISTING SOME GREAT TOOLS AND OTHER GREAT STUFF. SO PLEASE CHECK OUT MY OTHER AUCTIONS. THANKS! LOT OF CLAMPS ACME DIE STOP. Clamp-Rite Horizontal DESTACO CLAMPS HOLD DOWNS PLEASE LOOK AT THE PICTURES AND FEEL FREE TO ASK ANY QUESTIONS. I WILL BE HAPPY TO TAKE ANYTHING BACK THAT IS NOT AS DESCRIBED. MY FEEDBACK IS VERY IMPORTANT SO PLEASE CONTACT ME WITH ANY PROBLEMS. I WILL NOT CHANGE CUSTOMS FORMS. SO PLEASE DO NOT ASK. I ALSO AM NOT RESPONSIBLE FOR ANY CUSTOMS FEES.
|
|
|
2 NICE Jergens USA MILLING MACHINE 4-1/8" x 1-11/16" x 1-1/2" HOLD DOWN CLAMPS
This Sale is for ONE NICE and previously owned PAIR of Jergens made MILLING MACHINE HOLD DOWN CLAMPS. These clamps are manufactured from forged steel and are approximately 4-1/8" wide x 1-11/16" wide x 1-1/2" max height. There is a black finish for corrosion resistance. The joint swivels to allow clamping at various angles. There is a brass piece over the nose. Please note that the brass section has some minor tarnish. Which can be easily cleaned with use of a mild solvent and a cloth. Also one the the clamps has been customized by the previous owner to include a drilled section on the center nose through the brass and clamp. These high quality USA made CLAMPS are being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the ... moresole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advsed international bidders may have customs or dutyT charges applied by their government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the
|
|
|
32 - Machinist Strap CLAMPS Tool Hold Downs
32- 5/8& 3/4 bolt hold down clamps about 1/2 are new
|
|
|
30 - Machinist Strap CLAMPS Tool Hold Downs
30- 5/8 bolt hold down clamps about 1/2 are new
|
|
|
Morton Machinists HOLD DOWN CLAMPS-Machine-Work Holding Clamp
Offered today is a lot of 6 Morton machinists hold-down clamps. 6" long X 2 1/4" wide X 1" thick. The bolt slot is approx. 7/8" wide. The surface plating varies in condition-worn thin on some and in good condition on most(please see photos)
|
|
|
WILTON pair clamps nice hold down justable
this is a pair of like new WILTON Clamps
|
|