|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step ... moreblock width (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. UPC Does not apply Brand Handdo MPN 466621 Tool Type Clamping Kit.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step block ... morewidth (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Description：.
Buy It Now
Free Shipping Condition: New Location: Covina, United States Table Slot: 11/16" Stud Size: 5/8-11 Block Width: 1-1/8". Quality kit for a Bridgeport mills. [SIZE]: Table Slot: 11/16IN, Stud Size: 5/8IN-11. [MATERIAL]: ... moreMade of high quality tool steel for long life and increased durability.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States 1/2- 13" PIVOT CLAMP CLAMPING FOR 5/8" T-SLOT BRIDGEPORT MILLING BORING NEW 202-4810. Table T Slot Size: 5/8" Stud Thread: 1/2'13, ... moreStud Overall Length: 4-1/2" Clamp Width: 1-3/4" Max Clamping Capacity: Up to 3" Load Limit: 13.000 lbs, Fast Set-up, Instant height adjustment without blocks or shims The body of the clamp is formed by forge steel. A brass spacer is mounted on the end to prevent the work piece from damage, Supplied in pairs, 2 T slot nuts, 2 flange nuts, 2 springs, 2 clamping studs, 2 hold down clamp body, All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept: VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" ... morestep block width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Product Description: Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service .
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States "QUADRALLEL". This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest ... moreCraftsman / Inventor the industry has ever seen.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Clarksville, United States These V jaws are made in house right here in Iowa. They are reusable and much faster then milling a soft jaw. Another pro to using this type of jaw is ... morethe user is still able to use parallels to ensure the part is sitting flat in the vice.
Buy It Now
$15.45 Shipping Condition: New Location: Howell, United States VISE, VICE, ANGLE BLOCK, SOFT JAW, HARD JAW, SWIVEL PART HOLDER, INSERT, WORK HOLDING DEVISE, MACHINIST TOOLS, MILLING TOOL, GUNSMITH, TOOLMAKER, SKILLED ... moreCRAFTSMAN, TOOL AND DIE MAKER, PRECISION, PRESISION, QUAD-RALLEL, QUADRALEL, QUADRALLELL, PARALLEL, PARALELL, PARALEL, PAIR OF LLELS, WOODWORKING, WELDING.
Buy It Now
Free Shipping Condition: New Location: Covina, United States Step Clamp 25S-12, 40S-12, 60S-12, (2pcs of Each size). [SIZE]: Table T-Slot size: 5/8IN, Stud size: 1/2IN-13. Step Block: STB-1, STB-2, STB-3 (2pcs of ... moreEach size). [MATERIAL]: Made of high quality tool steel for long life and increased durability.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Auburn Hills, United States Datum side (vise side) and Inside finished for accurate positioning with both ends milled to 6" as shown in pictures. 6" x 2" x 1" - QTY 10 SETS = 20 ... morePIECES TOTAL AT A REMARKABLE PRICE! FOR VISES Very well made, high quality.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States 12 PCS CLAMP KIT FOR BRIDGEPORT MILL with 5/8" T-slot Low Profile Cam Action 202-4799. Positive side gripping action provides greater strength No ... moreloose parts to reassemble, If one of the six sides is worn or damaged just turn to another. Half turn provides.100" movement, 4 T-nuts. Thread 1/2-13, slot 5/8, 6 Fixture Clamps, 2 Hex Keys, 1 Fitted Case SHARS 4" 440V Milling Vise +/0.0004 SHARS 6" 670V Milling Vise +/0.0004 6" wide jaw plate. 7.50" inner jaw opening, 15.80" outer jaw opening, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.875" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. Master Card and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any
Buy It Now
$15.35 Shipping Condition: Used Location: Oklahoma City, United States SELLING THIS AND OTHER VICES THIS WEEK FOR A NEIGHBOR WHOS HUSBAND PASSED AWAY AND NEEDS TO DOWNSIZE. YOUR BIDDING ON A 4" CROSS SLIDING DRILL PRESS ... moreVISE HE USED IN HIS WOODSHOP. DURABLE CAST IRON CONSTRUCTION WITH REPLACEABLE WOODEN JAWS. PROVIDES MAXIMUM CLAMPING AND HOLDING POWER ON YOUR DRILL PRESS. COLD ROLLED STEEL SCREWS. CRANK HANDLES FOR ADJUSTING VISE FRONT TO BACK AND LEFT TO RIGHT. LOOKS TO BE ALL ORIGINAL. BOLT DOWN SLOTS FOR SECURING. DESIGNED FOR PRECISION DRILLING OR MILLING OF METAL AND WOOD. HASEN'T BEEN USED IN YEARS SO I OILED IT UP AND IT MOVES GOOD BUT YOU MAY WANT TO DISASSEMBLE AN CLEAN IT. AGE AND MAKER ARE UNKNOWN.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR 4" Accu Lock Vise Lockdown CNC Milling Machine Vise Plier Milling. VEVOR 6" Bench Vice Precision Milling Machine CNC Lockdown Vise 150mm Jaw Width. ... moreVEVOR 6" Precision Milling Machine Vise Bench Clamp Lock Vise CNC Vise Drilling.
Buy It Now
$18.40 Shipping Condition: New Location: Derby, United States R8 Collet Rack. Attaches to mill using one of the 1/2" bolts on the column. No modifications to the mill are needed. Made in the USA
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest Craftsman / Inventor ... morethe industry has ever seen. For Bridgeport type mill, CNC mill, anything using a milling vise.
Buy It Now
$33.06 Shipping Condition: New Location: Saint Charles, United States SHARS 52 PCS 5/8" T-Slot 1/2"-13 Stud Thread Hold Down Clamping Kit Set for Bridgeport Mill NEW. CLAMPING CATEGORYClamping Set. Case hardened to 24-26 ... moreHRc. STUD SIZE1/2-13. 6 step blocks. You may ask for freight cost before buying tools.
Buy It Now
Free Shipping Condition: Used Location: Frankfort, United States This is a 12mm holder with an 8mm reducer/adapter inserted.
$10.00 Shipping Condition: Used Location: South Plainfield, United States EXCELLENT 4C COLLET 1/2” DIAMETER ARBOR … CONDITION IS EXCELLENT … APPEARS TO BE MISSING 1 ORIGINAL WASHER … WILL COME AS SHOWN IN PICTURES … WILL COMBINE ... moreSHIPPING WHEN POSSIBLE …
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： C1" ER32 100L cylinder shank collet chuck 25.4 mm shank Holding all ER32 collets (Clamping range up to 20mm) Shank diameter : 25.4mm Hole thru ... morethe shank 12mm with M12 drawbar thread Shank length : 100mm 0.005MM (0.0003") Run-Out Tolerance 100% money back guarantee Description： The product has passed strict quality testing Durable and easy to install and replace Cost-effective, good after-sales service Quality assurance for your peace of mind Package List: 1×C1" ER32 100L 25.4mm Straight Shank Collet Chuck Holder CNC Mill Tool Notes:.
Buy It Now
$15.00 Shipping Condition: New Location: Schaumburg, United States 5C Square Collet 6PC Set. We also carry 5C Hex. Collet end OD & ID threaded. Hardened and precision ground.
Buy It Now
$40.00 Shipping Condition: New Location: Saint Charles, United States COMPACT MACHINE SLIDE TABLE BRAND NEW! SUPER NICE! GREAT FOR MILLS. DRILLS, PRESSES, BRIDGEPORT! 202-2301. 0.100 per dial revolution, Table: 5-1/2 x 12" ... moreHeight: 4-1/2" Travel: 8" Longitudinal. 5" Transverse, Base: 8 x 9" oval, T-slots for up 5/8" Bolts on 7-3/4 to 8-1/2" bolt circle, T-slot: 5/8" Precision machined and ground table, Dovetails ways and graduated dials, We have other tables and angle plates& clamping kits available at: Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept: VISA. Master, Discover, American Express, PayPal Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" step ... moreblock width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Description： Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service Package List:.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States The most accurate ER20 collet in the industry- average 0.0002" Total Indicated Runout (T.I.R.)! Techniks part # 04220-1/8. Others T.I.R. 0.0060" - TECHNIKS ... moreT.I.R. 0.0002". Precision ground and hand inspected.
Buy It Now
Free Shipping Condition: New Location: Newport, United States Vise handle speed wrench for the old-style Bridgeport vises. Tired of that long Bridgeport vise handle?. Then this is the one you want. This handle will ... morefit any vise with a ¾ square end. Made from 6061 aluminum and anodized red.
Buy It Now
Free Shipping Condition: New Location: Newport, United States Red Speed vise handle for all mill vise's that use3/4 handles. For use with Tormach, Grizzly, Kurt, Wilton, KBC, Winn, Southbend, Shars, Orange, Hass ... moreand other CNC machine vises requiring a3/4 handle.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 8 pc set: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4 By placing in your machine & expanding the arbor, you can machine the arbors to the precise ... morediameter & length for your job Supplied with alloy wrenches and wooden stand 100% Satisfaction Guaranteed! Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List: 8 PCS Expanding Arbors Set Mandrels 1/4" To 1-1/4" Lathe Milling Notes:.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Speed Handle •Replaces swivel handle in Kurt AngLock, Eron Lock-Tight Vise and other Milling Machine Vises •Machined aluminum. Type Speed Handle For Use ... moreWith 5″ Milling Vises. 5" MILL VISE SPEED HANDLE.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Our part# ALL-41035, 1" R8 round collet, Made of high grade tool steel, Hardened and precision ground, We stock the full range of R8 ... morecollets and tooling(see link below to our store) Great deals on R8 collet sets. Adapters, and much more milling/lathe tooling in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding our shipping policies(international shipping, quantity discounts, combined shipping, etc. contact us at. Returns/ Warranty Unless otherwise indi
Buy It Now
$47.27 Shipping Condition: New Location: Saint Charles, United States Shars 6" 2Pcs Quick Clamp Milling Vise + Certificate New. SHARS 4" 440V Milling Vise +/-0.0004. SHARS 6" 670V Milling Vise +/-0.0004. SHARS 6" 660U Milling ... moreVise +/-0.0004. SHARS 6" 600DS Double Station Milling Vise +/-0.0002.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
5h 52m 16s 0 bids
$52.50 Now
$11.00 Shipping Condition: Used Location: Attica, United States 1 full set, Starrett No S190 Little Giant Jack Screw. Set is in excellent condition. No dents or mill marks. Still in original box. Thank you for looking.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step ... moreblock width (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Package including?? 58 Pc 1/2 T-Slot Clamping Kit Mill Machinist Set 3/8-16.
Buy It Now
$10.40 Shipping Condition: New Location: Lodi, United States Custom made table mounted part locator stop. 303 Stainless Steel pivot pins. A 5/16" hex wrench is all that is required for tightening.
Buy It Now
$6.05 Shipping Condition: Used Location: Belmont, United States You may see a 1" standard, a 6" rule, a 12" ruler, or a quarter, and they are NOT included in what you are buying. And you are getting a deal and a half, ... morefor both of them. BUY THEM NOW! The screws on both of these will need cleaning, as will the rest of the pieces.
Buy It Now
Free Shipping Condition: New Location: Jacksonville, United States Here are the specs 2" Precision quick release vise for milling, drilling, and grinding. This is a beautiful little vise for compact / micro machining. ... more1-1/2" long x 5/8" tall throat capacity. Knurled thumb screw.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws ... moreto hold industrial parts in the size range 0.24" / 6 mm - 9.84" / 250 mm.
Buy It Now
Free Shipping Condition: New Location: Tijeras, United States ALL DIM ARE +/-. 010. SIMPLY DRILL AND TAP A 1/4 20 HOLE IN "ANYTHING" AND YOU ARE READY TO GO.
Buy It Now
$17.80 Shipping Condition: New Location: Saint Charles, United States We have another horizontal/vertical 5C collet chuck available. Uses any standard 5C collet, for a capacity up to 1-1/8" round. Can be used horizontal ... moreand vertical. Mounts on any angle plate, for vertical or horizontal use.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
$6.09 Shipping Condition: Used Location: Golden, United States Appears to be good quality hardware.
Buy It Now
$17.99 Shipping Condition: Used Location: Lombard, United States Nice shape, used condition with dings and scratches. Please see photos for details. Thanks for looking
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： For Large Or Small Shops In Lathes, Milling Machines, Grinders, Chucks, Collets, Fixtures Description： -8 Pcs Set: 1/4", 3/8", 1/2", 5/8", 3/4", ... more7/8", 1", 1-1/4 -With Allen Wrenches On A Handy Wooden Stand -Supplied With Alloy Wrenches And Wooden Stand Package Include： 8*Expanding Arbors Set Mandrels W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
Buy It Now
$5.70 Shipping Condition: New Location: Saint Charles, United States 1/2" 13 FLANGE NUTS CLAMPING KIT BRIDGEPORT MILL NEW Product Code 202-4807 Product description(A) Thread Diameter: 1/2-13(B) Across Flats: 7/8" ... moreC) Washer O.D: 1-5/32(D) Height: 1/2 Product features Large bearing ensures full surface control Heat treated steel. Black oxide We Also Have Other Size Flange Nuts Available at My Ebay Store. Please Contact Us for More Information and Prices! Product 202-4805 Thread 5/16-18" B 1/2" C 11/16" H 9/32" Product 202-4806 Thread 3/8-16" B 9/16" C 3/7" H 9/32" Product 202-4808 Thread 5/8-11" B 15/16" C 1-5/16" H 5/8" Product 202-4809 Thread 3/4-10" B 1-1/8" C 1-1/2" H 21/32" Product 202-4839 Thread 7/8-9" B 1-5/16" C 1-3/4" H 3/4" Product 202-4843 Thread 1-8" B 1-1/2" C 2" H 3/4" If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. Master Card and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the m
$9.10 Shipping Condition: Used Location: Lees Summit, United States Screw is 1.75" long. Base is cast iron.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Made Of High Quality Casting Steel For Long Life And Increased Durability. All Parts Heat Treated. -7/16" T-Slot, 3/8"-16 Stud Size, & 1" ... moreStep Block Width (All Standard) -Contains (24) Studs- (4) Each Of 3", 4", 5", 6", 7", & 8" Long -Also Contains (4) Coupling Nuts, (6) Forged Steel Step Clamps (2 Each Based On Stud Sets), (12) Steel Step Blocks, (6) Flange Nuts, (6) T-Nuts, & Wall Holder Package Include： 58*Pack Clamping Kit W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Techniks part# 04240-1/2, We are a full line Techniks distributor- contact us for custom quotes and our best pricing guarantee! The most ... moreaccurate ER40 collet in the industry- average 0.0002” Total Indicated Runout(T.I.R. Clamping Range.461-500” Precision ground and hand inspected. Only the very best materials and grinding techniques used! Individual ER40 collets. Sets, collet chucks, and more Techniks items in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We sell the entire Techniks line(Contact us for best pricing guarantee) 100% Satisfaction Guaranteed! Others T.I.R. 0.0060" TECHNIKS T.I.R. 0.0002" Gain 10% tool life for every 0.0001" improvement in T.I.R. Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and i
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
Buy It Now
$29.81 Shipping Condition: New Location: Saint Charles, United States CLAMPING CATEGORYClamping Set. Case hardened to 24-26 HRc. STUD SIZE3/8-16. 6 step blocks. You may ask for freight cost before buying tools. at Fixed ... morePrices. 24 studs; 4 pieces 3, 4, 5, 6, 7, 8" Long.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreLathe Chuck CNC Soft Jaws. Lathe Chuck CNC Hard Jaws.
|
|
|
|
QUICK RELEASE CLAMP mill grind drill hone woodworking
This is quick release clamp in good working condition guaranteed. The rod has about 5-1/4 inches of travel. The base is 3 inches by 3-1/2 inches. When the lever is lowered the clamp moves in about 1/8 inch clamping and locking. When the lever is up the rod moves freely. Buyer to pay shipping on 7 pounds. Please email questions. We combine purchases for savings on shipping.
|
|
|
Vulcan No. 54 Hold Down Clamp with Bolts Lathe Mill Machinists
Vulcan No. 54 Hold Down Clamp with Bolts for Lathe. Mill, Machinists In as found condition at an estate sale. This is a used Vulcan No. 54 Forged Hold Down Clamp with bolts. It appears to be in excellent condition but a little dirty. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS. We have many hard to find tool parts for Craftsman and Delta tools. Check out and also
|
|
|
Twist Fixture Clamp Machinist Lathe Mill With "T" Slot Nut and Bolt
Fixture Clamp Machinist. Lathe, Mill, Metal Work Comes with"T" Slot Nut and Bolt. Works perfectly could use a cleaning. Has initials(see pics. Check out my other auctions. Your items will be shipped within 24 hours of received payment. Thanks for looking! Most of my"buy it now" item are for sale locally so if you need this get it while it's still available.
|
|
|
90 pc 1/2" Stud HOLD DOWN CLAMP CLAMPING SET Machinist Tools Lathe Mill
Clamping kit includes: 40 studs. 6 step block pairs, 8 T-nuts, 10 nuts, 2 coupling nuts and 6 end hold-downs. This kit is for 5/8" slot mills. Features: High grade hardened steel/Aluminum For mills with 5/8" table slot Studs are 1/2" 13 TPI Includes: 40 studs(2 1/4-12" 6 step block pairs 8 T-nuts 10 nuts 2 coupling nuts 6 end hold-downs 3.6& 8" TE-CO. NORTHWESTERN TOOL,MIX, This will ship out USPS Priortiy at $11.35 and arrive within 3 days of shipping. NO RESERVE
|
|
|
Hold Down Clamp #54 Machinist Strap CLAMP Tool Hold Down set up Mill 4"
Milling Hold Down Clamp 4" long 1/3/4" wide 3/4" thick
|
|
|
7/8 Williams Machinist Strap CLAMP Tool Hold Down set up Mill block 10" Long USA
Item. Qty.1 strap clamp Manufacturer. Williams Vulcan made in the USA America Dimensions. 1-13/32" thick x 10" Long Overall x 2-1/2" wide outside with a 15/16" wide slot for 5/8. 3/4" or 7/8" T bolts Condition. Good used This is not an actual photo but it is pretty much 100% identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy ... moreadditional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9
|
|
|
Williams 56A Machinist Strap CLAMP Tool Hold Down set up Mill block 6" Long USA
Williams hold down clamp#56 6" long 3/4" slot
|
|
|
24 PC 3/4" MILLING MACHINE MILL CLAMP STUDS MACHINE SHOP
Lot of 3/4" studs for material clamping on a large machine. Actual body diameter is aprox.71" threads are 10tpi. Some surface corrosion from sitting. See photos for details. Ship weight 20 pounds
|
|
|
DESTACO CLAMP NO. 341 4# CLAMPS LATHE MILL DRILL MACHINIST FIXTURE TOOLING
YOU ARE BIDDING ON 4# DESTACO MODEL 341 CLAMPS. SEE MY OTHER AUCTIONS
|
|
|
MACHINIST TOOLS LATHE MILL 2 Starrett Parallel Machinist Clamp s
VERY VERY VERY HEAVY! PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ... moreANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-14061b266ed-0x100-
|
|
|
BESSEY Rite Hite Self-Positioning Hold-Down Clamp Tool Mill Parts Stud Size 5/8
This set looks to be in good shape. The head of the swivel on the one measures 1.714" and the other is 1.750" so they are not identical. Also one is just a little longer than the other. The 5/8" bolt is 7-3/4" Long. Condition. Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above ... morefor shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
|
|
|
Mill Clamp, Bolt, & Block Set
20) Pcs. 1/2" Studs. 4) 6" Clamps, 2) 4" Clamps, 2 sets of Step Blocks, 10) T" Slot Nuts, 10) Regular Nuts. Good Condition!
|
|
|
VULCAN STRAP CLAMP No. 66 Bridgeport mill tooling
Good condition. No. 66,
|
|
|
MACHINIST TOOL WELCH #1100 CAM-LOCK DRILL PRESS CLAMP LATHE MILL GRINDING
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS* WELCH#1100 CAM-LOCK DRILL PRESS CLAMP* SIGNS OF WEAR& USE BUT STILL IN WORKING CONDITION. ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ... moreALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
MITEE-BITE Uniforce Clamps Base CNC MILL CLAMP LOT OF 10
LOT OF 10 MITEE BITE CLAMPS 1/4-20 SCREW
|
|
|
lot of 2 VINTAGE STARRETT 161-E 161E PARALLEL CLAMP MACHINEST LATHE MILL
These clamps. Starrett 161-E, are in nice working condition. They are incised with a name. See pictures for more information and a better description. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SMALL MACHINE MILLING CLAMP SET STUDS CLAMP ON INDEX TYPE STAND UNIMAT MILL
As found at an estate these are small clamps with a rack full of studs the screw underneath releases the top and you can turn and remove what you need without the rest of them falling out. Not sure what machines these are for but has to be a small one ruler in picture so you can get idea of size. Check out my!Be sure to add me to your!
|
|
|
3/4" Armstrong Machinist Strap CLAMP Tool Hold Down set up cnc Mill 8" Long USA
Item. Qty.1 per bid of a heavy duty Forged steel strap clamp Manufacturer. Armstrong made in the US America Dimensions. 1-3/16" thick x 8" Long Overall x 2-3/8" wide outside with a 3/4" wide slot for 1/2. 5/8 or 3/4" T bolts Condition. Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount ... morelisted above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
3/4" Bolt Step style Strap Clamp Mill machine TE-CO USA Tool Hold Down 8" Long
Item. Qty.1 per bid of a Huge Super heavy duty steel strap clamp Manufacturer. TECO made in the US America Dimensions. 3/4" x 3" Long Slot Condition. Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. ... moreThere will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
Machinist Bench CLAMP Tool Hold Down Mill Vise Cold abrasive chop saw parts
Item. This type of clamp can be used on many things. It is steel. Manufacturer. Unknown Dimensions. The main base mounting piece measures 2" x 3-1/8" The center to center of the mount holes is about 2-3/8" the holes are 23/64" The thread diameter is 5/8" Overall Length is 8-1/2" The round push end is 1-3/4" diameter round and does spin and also does swivel a little bit Distance from the base to the center of the ram is about 1-5/16" Travel. About 3-3/4" Condition. Good used We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for ... moreyou and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
|
|
|
5/8" Bolt Step style Strap Clamp Mill machine TE-CO Tool Hold Down 4" Long
THIS IS FOR 2 OF THEM 5/8" Bolt Step style Strap Clamp Mill machine TE-CO# 30502 Tool Hold Down 4" Long. THROWING IN THIS ONE WITH IT IT'S 1/2" X 2-1/2" 30510 VERY GOOD USED SOME VERY MILD SURFACE WEAR FROM TOOL BOX
|
|
|
3/4" Bolt Step style Strap Clamp Mill machine TE-CO Tool Hold Down 6" Long
3/4" Bolt Step style Strap Clamp Mill machine TE-CO# 30503 Tool Hold Down 6" Long.VERY GOOD USED SOME VERY MILD SURFACE WEAR FROM TOOL BOX
|
|
|
MACHINIST LATHE MILL PARALLEL CLAMP FOR HOLD DOWN SETUP
Clamp is 4" long and in good working condition.Selling as is as found.BUYER PAYS POSTAGE. THANKS FOR LOOKING Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HEINRICH TOOLS INC. GRIPMASTER GRIP MASTER VISE CLAMP DRILL PRESS MILL FIXTURE
HELLO AND WELCOME TO MY AUCTION. OVER THE NEXT FEW DAYS I WILL BE LISTING SOME GREAT TOOLS AND OTHER GREAT STUFF. SO PLEASE CHECK OUT MY OTHER AUCTIONS. THANKS! HEINRICH TOOLS INC. GRIPMASTER GRIP MASTER VISE CLAMP DRILL PRESS MILL FIXTURE. PLEASE LOOK AT THE PICTURES AND FEEL FREE TO ASK ANY QUESTIONS. I WILL BE HAPPY TO TAKE ANYTHING BACK THAT IS NOT AS DESCRIBED. MY FEEDBACK IS VERY IMPORTANT SO PLEASE CONTACT ME WITH ANY PROBLEMS. I WILL NOT CHANGE CUSTOMS FORMS. SO PLEASE DO NOT ASK. I ALSO AM NOT RESPONSIBLE FOR ANY CUSTOMS FEES.
|
|
|
7/8" Machinist Strap CLAMP Tool Hold Down set up cnc Mill 8" Long USA
Heavy duty Forged steel strap clamp Made in the USA Dimension: 7/8" thick x 8 5/8" Long Overall x 2.655" wide outside with a 5/8" wide slot for 1/2 or 5/8 T bolts lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-145021e3288-0x105-
|
|
|
7/16" Bolt Step style Strap Clamp Mill machine TE-CO Tool Hold Down 4" Long
THIS IS FOR 2 OF THEM 7/16" Bolt Step style Strap Clamp Mill machine TE-CO# 30502 Tool Hold Down 4" Long. THROWING IN THIS ONE WITH IT IT'S 7/16" X 2-1/2" 30510 VERY GOOD USED SOME VERY MILD SURFACE WEAR FROM TOOL BOX
|
|
|
MACHINIST TOOLS LATHE MILL Kant Twist Clamp # 6 (TJ)
Kant Twist#6 clamp. thank you.
|
|
|
MACHINIST TOOLS LATHE MILL Lot of Machinist MICRO Parallel Clamp s for Sherline
THE WOOD STAND IS NOT INCLUDED IN THE SALE. PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE ... moreKNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
|
MACHINIST'S SPI MILL VISE STOP AND SIMILAR HOLD DOWN CLAMP
GOOD USABLE CONDITION. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE*I AM NOT AN EXPERIENCED MACHINIST AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST AND MAY NEED CLEANING.MAY HAVE SOME PITTING OR LIGHT SURFACE RUST,MAY BE INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,MAY NEED FURTHER METICULOUS CLEANING,MAY NOT BE FULLY ACCURATE AND MAY BE CHIPPED.NEED SHARPENING AND MAY HAVE DUPLICATE SIZES BUT MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE OR A SECOND TOOL TRAY AROUND THE LATHE OR MILL OR FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING AND PLEASE CHECK OUT MY OTHER CUTTING TOOLS,TOOLING,TOOL HOLDING,COLLECTIBLES AND OTHER USABLE STANLEY STARRETT,BROWN& SHARPE,LUFKIN ETC MACHINIST'S TOOLS AND OTHER TRADE TOOLS& ... moreEQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE*AS ALWAYS MULTIPLE PURCHASES WILL DECREASE ALREADY LOW SHIPPING COSTS.PLEASE READ BELOW* IF YOU WOULD LIKE TO CARRY OVER A PURCHASE FROM ONE WEEK TO THE NEXT TO SAVE SHIPPING THAT'S FINE BUT I WILL REQUIRE PAYMENT ONLY ON ITEMS PURCHASED WHILE HOLDING TO KEEP MY EBAY UP TO DATE.THANK YOU FOR YOUR UNDERSTANDING* INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.75(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIORITY BOX $11.00. LARGE FLAT RATE PRIORITY BOX $16.00.IN USA ONLY $$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$SAVE.SEE USPS ON LINE FOR BOX SIZES*FOLD OUT RULER PICTURED NOT INCLUDED AS AN ITEM IN THE LOTS.FOR REFERENCE ONLY* Posted with the
|
|
|
6D KANT-TWIST Machinist-Lathe-Mill-Welding CLAMP #6
Normal 0 false false false EN-US JA X-NONE SAXTON KANT-TWIST DESCRIPTION TWIST CLAMP# 6 HEAVY DUTY FUNCTIONAL MEASUREMENTS Please reference pics CONDITION Pre-Owned Condition IMPERFECTIONS(ILLUSTRATED IN PICTURES) Cosmetically it shows wear Functionally it is free of imperfections PLEASE REVIEW ALL PICTURES AS TO ENSURE YOU’RE OVERALL SATISFACTION WITH THIS ITEM
|
|
|
(2) Large Machinist Mill Clamp Tools, T Slot Nuts, Custom Made, 7" - 10" Size
2) Large Machinist Mill Clamp Tools. These mount with T Slot Nuts. Both are Custom Made and about 8" Tall and Wide. The first pictured has 3 holes in the arm. The screw is 7' long. the width is 7" This one is fabricated and will fit any mill as you can update the t slot nut. The one with the curved are is 9" wide and 10" tall on the screw. It also is custom made and everything moves smoothly. Don’t like our asking price? Make a fair offer for us to consider! Our eBay store contains many more great values. Shipping and handling costs for this item listing will be $11.95 within the U.S.A. We will ship worldwide on just about everything we sell. Sales within the state of Michigan are taxable. Thank you! 0714)
|
|
|
SET of 4 MILLING MACHINE HOLD DOWN CLAMP mill holding tool 4" CARR LANE CL 27 CS
4 Good Used Hold down Clamps Carr Lane USA Approx. Dimensions: 4" Long x 1 1/4" Wide Slot: Approx. 1 1/2" x 1/2" CL 27 CS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
63 pc 7/16" Slot 3/8" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL
For sale is a used 63 piece set of 7/16 hold down clampst that are missing a few pieces.
|
|
|
Mitee-Bite 31400 ID expansion clamps Model #7 CNC Mill Table Clamp HAAS R#0119
For sale is a Mitee-Bite 31400 ID expansion clamps Model#7 Make: Mitee-Bite Serial Number: model#7 or 31400 Flange Dia: 4.2320" Max Expansion Dia: 3.0600" Min Expansion Dia: 1.1500" Holding Force: 10000 lb Condition: used. There is some wear and nicks from storage and use. This would be a great extra to use or a good replacement for a damaged unit! Note: If you need something measured let me know! If you have any questions about this item or any other items listed feel free to send us a message! All items under 150 Lb's are shipped out with UPS Ground with insurance and a Tracking number. I can combine shipping to help lower the cost of shipping for the purchase of multiple items. Please note to buyers outside the United States. Please ask for a shipping quote before placing a bid or buying an item. Buyer pays all shipping; ... moreOhio Sales Tax Rules Apply; Payment must be received within 7 days of close of sale. Sold AS IS. So no returns or refunds. I reserve the right to cancel this listing at any time no matter if there are active bids because this item is for sale locally. Good luck and happy bidding!
|
|
|
Kant Twist Clamp 2 1/2D USA for Machinist Tool Mechanic Gunsmith C Grind Mill
One used Kant Twist Clamp. Made in USA, 2 1/2D, not bent or twisted, works smooth. Opens to 2 1/4" My personal tool and engraved with my name. Retiring and will be selling a lot of machinist tools. I do not ship outside the USA. PayPal only thanks for looking.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b0f57f6b6-0x108-
|
|
|
Mill Drill Press Lathe Hold Down Clamp T Slot Machinist Tool Shaper Mechanic
We have retired. Cleaning out many years of stuff. Mainly usable items but some pieces might be collectible…you determine. I will describe everything to the best of my ability. This auction is for a hold down clamp. It measures aprox 3 1/2" long and the throat on the yoke is a little over 5/8" wide. Has a 1/2" T slot bolt. It is in good usable condition as can be seen in the pictures. Any rulers in pictures are not included in auction. They are for reference only. Let the pictures do the talking. Everything is sold"as is" If you have questions ask before bidding. HIGH BIDDER PLEASE PAY BID PRICE, SHIPPING AND DELIVERY CONFIRMATION BY PAYPAL. I WILL COMBINE ITEMS TO SAVE ON SHIPPING BUT WAIT UNTIL YOU RECEIVE AN INVOICE IF YOU ARE COMBINING AUCTION ITEMS. NO INTERNATIONAL SHIPPING. PAYMENT EXPECTED WITHIN 5 DAYS OF ... moreAUCTION ENDING. THANK YOU
|
|
|
Machinist / Tool Maker 1/2" Mill Clamp Vintage
Preowned in good condition. You will receive the items you see here.
|
|
|
Armstrong 78 Machinist Strap STEP CLAMP Tool Hold Down set up Mill block USA 7/8
Item. Qty.1 Super heavy duty milling/ boring machine vise strap clamp Manufacturer. Armstrong Model#78 made in the USA America Dimensions. 1-1/4" thick x 8-1/4" Long Overall x 2-5/16" wide outside with a 7/8" wide slot for 5/8. 3/4" or 7/8" T bolts Condition. Nice used This is not an actual photo but it is pretty much 100% identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them ... morein the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Mac
|
|
|
Lenzkes High Quality Machinist Hold Down Clamp for Radial parts Mill Machining
Lenzkes High Quality Machinist Hold Down Clamp for Radial parts Mill Machining Here offered is a very high quality made steel clamping system by the well known and high end company Lenzkes. Made in Germany this clamp will hold a part down against a milling machine base using t-bolts and coupled with a backing plate of your work holding tooling will hold a radial part. Lenzkes unique clamping system allows the machinist to put pressure down at the point of contact against the part to be machined with an angled slide arrangement. It has replaceable clamping blocks for different configurations of part holding. Supplied here is the head for a round/ radius part. Overall size is appx 7" long x 5" wide x 3" tall with the base being 1" thick. Part No. on bottom is SKQ 1018? It will weigh quite a bit. Thus the shipping charge. ... moreIt has been only gently used and definately not abused in any manner. If your in need of a special work holding clamp. And like the Lenzkes system then take a look at our photos of this clamp, add it to your inventory. We gladly combine shipping on same week multiple purchases! Help yourselves folks to this neat item. This is a NO RESERVE AUCTION! Great Gift for the Special Person! We guarantee all our items 100% Shipping charges apply to lower 48 United States. Shipping charges may very to Western U.S. as well. We try to get as close as possible to the actual shipping charges for each package but reserve the right to request additional funds to Western U.S. as well as Alaska& Hawaii. We also reserve the right to add insurance to the cost since eBay's system will allow only $4.00 shipping charges for books in the rare book category. We will NOT inflate the insurance charges. WINNING BIDDER TO PAY SHIPPING AND INS. ALL WITHIN 7 DAYS OF AUCTION CLOSE CHECK OUT OUR OTHER UNIQUE ITEMS ON EBAY Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
6-3/4" OPEN TOE MOLD CLAMP MILL MILLING TABLE STEEL
6-3/4" Long open toe clamps used for molding machines or milling machines. You are purchasing the two clamps shown. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b91ec068f-0x110-
|
|
|
6" and 7-1/2" OPEN TOE MOLD CLAMP MILL MILLING TABLE STEEL
One 6" and one 7-1/2" Long open toe clamps used for molding machines or milling machines. You are purchasing the two clamps shown.
|
|
|
MACHINIST TOOLS LATHE MILL 2 NICE Starrett Parallel Clamp s for Set Up Hold Down
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. 1
|
|
|
HOLD DOWN SET CLAMP SET MACHINIST OVER 225 PIECES STEP BLOCKS MILL ACCESSORIES
HOLD DOWN SET CLAMP SET MACHINIST OVER 225 PIECES STEP BLOCKS MILL ACCESSORIES VERY GOOD CONDITION. SELLING ALL FOR ONE MONEY. GOOD LUCK. SHIPPING& HANDLING FREE.
|
|
|
68 Pc 3/4 Slot 5/8"-11 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holde
Welcome! Up for sale is a 68 Pc 3/4 Slot 5/8"11 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holder. 5/8"11 studs. 3/4" t-slot width. Feel free to email any questions! SCT150211-02
|
|
|
38 Pc 5/8 Slot 1/2"-13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holde
Welcome! Up for sale is a 38-Piece 5/8 Slot 1/2"13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holder. 1/2"13 studs. 5/8" t-slot width. We had multiple partial sets and combined them to offer sets as complete as possible. Some of the studs may be all-thread replacements. Feel free to email any questions! SCT150210-10
|
|
|
46 Pc 5/8 Slot 1/2"-13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holde
Welcome! Up for sale is a 46-Piece 5/8 Slot 1/2"13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holder. 1/2"13 studs. 5/8" t-slot width. We had multiple partial sets and combined them to offer sets as complete as possible. Some of the studs may be all-thread replacements. Feel free to email any questions! SCT150210-09
|
|
|
53 Pc 5/8 Slot 1/2"-13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holde
Welcome! Up for sale is a 53-Piece 5/8 Slot 1/2"13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holder. 1/2"13 studs. 5/8" t-slot width. We had multiple partial sets and combined them to offer sets as complete as possible. Some of the studs may be all-thread replacements. Feel free to email any questions! SCT150210-08 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14be635db6f-0x112-
|
|
|
58 Pc 5/8 Slot 1/2"-13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holde
Welcome! Up for sale is a 58-Piece 5/8 Slot 1/2"13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Wall Holder. 1/2"13 studs. 5/8" t-slot width. We had multiple partial sets and combined them to offer sets as complete as possible. Some of the studs may be all-thread replacements. Feel free to email any questions! SCT150210-07 `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14be635dbd9-0x10d-
|
|
|
40 Pc Set 1/2"-13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Bridgeport Hold
Welcome! Up for sale is a 40-Piece Set of 1/2"13 Mill Set up Hold Down Step Clamp T-Bolt Set w/ Bridgeport Holder. 1/2"13 studs. 5/8" t-slot width. Bridgeport branded holder/carrier. We had multiple partial sets and combined them to offer sets as complete as possible. Some of the studs may be all-thread replacements. Feel free to email any questions! SCT150210-06 ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14be635ddc1-0x107-
|
|
|
Large Lot Machinist Tool Maker Lathe Mill Clamp Set 3/8" Used
This is a nice old lot of machinist tools. They appear to be in good used condition. They just need a little cleaning. The size is 3/8" They belonged to a local machinist who recently passed away. Satisfaction guaranteed. We would like payment within 2 days please. Shipping is $12.00.
|
|
 |