|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step block ... morewidth (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Description：.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" ... morestep block width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Product Description: Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service .
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
$9.10 Shipping Condition: Used Location: Lees Summit, United States Screw is 1.75" long. Base is cast iron.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States The set features a 1/2" table T-slot size and 3/8" stud size (3/8"-16) for compatibility with a variety of milling machines. Made of premium tool steel ... morefor long-lasting performance, all parts are heat treated for added durability and strength.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR 4" Accu Lock Vise Lockdown CNC Milling Machine Vise Plier Milling. VEVOR 6" Bench Vice Precision Milling Machine CNC Lockdown Vise 150mm Jaw Width. ... moreVEVOR 6" Precision Milling Machine Vise Bench Clamp Lock Vise CNC Vise Drilling.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" step ... moreblock width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Description： Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service Package List:.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 kg) Package ... moreDimensions: 18"*13"*6" (45*32*14 cm) .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
$18.40 Shipping Condition: New Location: Derby, United States R8 Collet Rack. Attaches to mill using one of the 1/2" bolts on the column. No modifications to the mill are needed. Made in the USA
Buy It Now
$5.58 Shipping Condition: New Location: China CNC Vise CNC milling tools M6 OK Vise cnc Machine Milling Hign Precision Vise. Min 40 - Max 44.5.
Buy It Now
$5.95 Shipping Condition: New Location: Battle Ground, United States Made in USA Made of steel for long service life. 1/8" diameter stop rod x 2" long hardened rod. Stop rod is below the surface of vise jaw for cutter clearance. ... moreClamps 1/2" to 1-1/4" jaw width. Adjustable rod side to side. Precision positioning of parts
Buy It Now
$5.75 Shipping Condition: New Location: Eagle, United States Untitled Document Description Item: Vise Jaw Stop(Model: 14-000) Condition: New in Box Specifications Fits all milling machine vises with 1/2" 7/8" ... morethick jaws and 1/8" minimum protrusion 1-1/8" wide body with 2 hardened steel guide pins and large#10 clamp screw 1/8" x 2" hardened stop pin is used to accurately locate work pieces. The stop pin is also adjustable side-to-side to allow for cutter clearance The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance Body made from anodized aluminum 8-32 non-marring flat point set screws are used to secure stop rod Vise Jaw Stop The Vise Jaw Stop by Edge Technology Products is the most advanced jaw stop to date. It features a micro stop rod that is positioned below the top surface of the vise jaws for cutter clearance. The stop rod is also adjustable side-to-side to allow space between the unit and the work piece for even more cutter clearance. Patent Pending Payment& Shipping Payments Accepted: Paypa l. Shipping USPS. See Shipping and Payments tab for details. Note: If multiple items are purchased from our store we will combine shipping. Please request a package invoice before you pay. International: Worldwide shipping available. See Shipping and Payments tab for details. International buyers please note that your country's customs department may add additional charges to process your package. We are unable to anticipate these fees and advise you to research your country's customs regulations before you bid. Thank you. Email info@edgetechnologyproducts.com Phone(520)299-1185 Vise Jaw Stop Photo Gallery Related Products by Edge Technology Products Please take a moment to check out the other high quality machinist gages and tools that we offer. Click the button below to go to our Ebay Store.
$10.00 Shipping Condition: Used Location: South Plainfield, United States EXCELLENT 4C COLLET 1/2” DIAMETER ARBOR … CONDITION IS EXCELLENT … APPEARS TO BE MISSING 1 ORIGINAL WASHER … WILL COME AS SHOWN IN PICTURES … WILL COMBINE ... moreSHIPPING WHEN POSSIBLE …
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description 4-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due to ... moretheir excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. Features & Details Premium Quality Structure: The jaw of the bench vise is made of 45# steel. After high-frequency quenching, the wear resistance of the jaw is improved and the service life is prolonged. The vise body is HT250 high-quality cast iron forging with good toughness, high strength, and durability. .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： C1" ER32 100L cylinder shank collet chuck 25.4 mm shank Holding all ER32 collets (Clamping range up to 20mm) Shank diameter : 25.4mm Hole thru ... morethe shank 12mm with M12 drawbar thread Shank length : 100mm 0.005MM (0.0003") Run-Out Tolerance 100% money back guarantee Description： The product has passed strict quality testing Durable and easy to install and replace Cost-effective, good after-sales service Quality assurance for your peace of mind Package List: 1×C1" ER32 100L 25.4mm Straight Shank Collet Chuck Holder CNC Mill Tool Notes:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Eugene, United States 💖[Wide Application] - Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Type: Bench Vise. 💖[Flexible ... moreHandle] - The handle rotates naturally and smoothly.
Buy It Now
Free Shipping Condition: New Location: United States VEVOR 5" Accu Lock Vise Precision Milling Drilling Machine Bench Clamping Vice. VEVOR 6" Precision Milling Machine Vise Bench Clamp Lock Vise CNC Vise ... moreDrilling. VEVOR Bench Vise 6" 30Kn Heavy Duty w/ 360° Swivel Base Head Two Clamping Jaws.
Buy It Now
Free Shipping Condition: New Location: Newport, United States Red Speed vise handle for all mill vise's that use3/4 handles. For use with Tormach, Grizzly, Kurt, Wilton, KBC, Winn, Southbend, Shars, Orange, Hass ... moreand other CNC machine vises requiring a3/4 handle.
Buy It Now
$12.00 Shipping Condition: New – Open box Location: Penfield, United States See Photos.
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States "QUADRALLEL". This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest ... moreCraftsman / Inventor the industry has ever seen.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step ... moreblock width (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Package including?? 58 Pc 1/2 T-Slot Clamping Kit Mill Machinist Set 3/8-16.
Buy It Now
Free Shipping Condition: New Location: El Monte, United States Autobox Precision Milling Vise provides secure and accurate positioning of your workpiece during milling operations. Features perfectly aligned, precision-ground ... morejaws, large opening. -- 1 x Milling Vise.
Buy It Now
$5.00 Shipping Condition: New Location: China MTAtype is a Morse taper shank with a flat tail. For example, drill bits, machine tools, etc. are Morse taper shanks with a flat tail. 1 × Morse Taper ... moreArbor. Used: CNC Lathe machinery. Mode: MT milling chuck arbors.
Buy It Now
Free Shipping Condition: New Location: Tijeras, United States ALL DIM ARE +/-. 010. SIMPLY DRILL AND TAP A 1/4 20 HOLE IN "ANYTHING" AND YOU ARE READY TO GO.
Buy It Now
$10.40 Shipping Condition: New Location: Lodi, United States Custom made table mounted part locator stop. 303 Stainless Steel pivot pins. A 5/16" hex wrench is all that is required for tightening.
Buy It Now
$47.27 Shipping Condition: New Location: Saint Charles, United States Shars 6" 2Pcs Quick Clamp Milling Vise + Certificate New. SHARS 4" 440V Milling Vise +/-0.0004. SHARS 6" 670V Milling Vise +/-0.0004. SHARS 6" 660U Milling ... moreVise +/-0.0004. SHARS 6" 600DS Double Station Milling Vise +/-0.0002.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Speed Handle •Replaces swivel handle in Kurt AngLock, Eron Lock-Tight Vise and other Milling Machine Vises •Machined aluminum. Type Speed Handle For Use ... moreWith 5″ Milling Vises. 5" MILL VISE SPEED HANDLE.
Buy It Now
$40.00 Shipping Condition: New Location: Saint Charles, United States COMPACT MACHINE SLIDE TABLE BRAND NEW! SUPER NICE! GREAT FOR MILLS. DRILLS, PRESSES, BRIDGEPORT! 202-2301. 0.100 per dial revolution, Table: 5-1/2 x 12" ... moreHeight: 4-1/2" Travel: 8" Longitudinal. 5" Transverse, Base: 8 x 9" oval, T-slots for up 5/8" Bolts on 7-3/4 to 8-1/2" bolt circle, T-slot: 5/8" Precision machined and ground table, Dovetails ways and graduated dials, We have other tables and angle plates& clamping kits available at: Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept: VISA. Master, Discover, American Express, PayPal Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
$17.99 Shipping Condition: Used Location: Lombard, United States Nice shape, used condition with dings and scratches. Please see photos for details. Thanks for looking
Buy It Now
Free Shipping Condition: New Location: Chino, United States CNC Self-centering Vise Fixture CNC Machining Tool HRC58 ° 8-55mm / 50-75mm A new self centering vise, the claw can be disassembled and replaced separately, ... morewith high hardness and good wear resistance, which is suitable for electrode processing and mechanical parts processing. Specification: Claw material: stainless steel（440C） Hardness：HRC58 ° Repeat positioning accuracy: 0.03mm Maximum screw torque: 40Nm Opening distance: (8-55 mm) (50 mm-75 mm) Weight: 1.1kg Size: 75mm * 54mm * 44mm Application: holding different sizes of work center unchanged Features: 1.Strong versatility 2.High stability 3.Long service life 4.Large clamping range and high clamping strength Package Included: 1X CNC Vise Note: Please allow 1-3MM differs due to manual measurement. Due to the different display and d.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 8 pc set: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4 By placing in your machine & expanding the arbor, you can machine the arbors to the precise ... morediameter & length for your job Supplied with alloy wrenches and wooden stand 100% Satisfaction Guaranteed! Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List: 8 PCS Expanding Arbors Set Mandrels 1/4" To 1-1/4" Lathe Milling Notes:.
Buy It Now
Free Shipping Condition: New Location: Melville, United States Morton Machine Works Quill Stop part 1220-S. 1/2-20 Thread Stop Rods for Bridgeport Milling Machine. Used with existing stop screw, it fits all 1/2-20 ... morethread stop rods on Bridgeport milling machines.
Buy It Now
$6.05 Shipping Condition: Used Location: Belmont, United States You may see a 1" standard, a 6" rule, a 12" ruler, or a quarter, and they are NOT included in what you are buying. And you are getting a deal and a half, ... morefor both of them. BUY THEM NOW! The screws on both of these will need cleaning, as will the rest of the pieces.
Buy It Now
Free Shipping Condition: New Location: Jacksonville, United States Here are the specs 2" Precision quick release vise for milling, drilling, and grinding. This is a beautiful little vise for compact / micro machining. ... more1-1/2" long x 5/8" tall throat capacity. Knurled thumb screw.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： For Large Or Small Shops In Lathes, Milling Machines, Grinders, Chucks, Collets, Fixtures Description： -8 Pcs Set: 1/4", 3/8", 1/2", 5/8", 3/4", ... more7/8", 1", 1-1/4 -With Allen Wrenches On A Handy Wooden Stand -Supplied With Alloy Wrenches And Wooden Stand Package Include： 8*Expanding Arbors Set Mandrels W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
Buy It Now
$5.45 Shipping Condition: New Location: Lodi, United States Fits many Machines like- HAAS, OKUMA, MAZAK, HURCO, FADAL, BRIDGEPORT. vise keys are used to align your vise to your milling machine table. You can set ... morea vise on your machine table and have it aligned automatically within 0.003".
Buy It Now
Free Shipping Condition: New Location: Chino, United States This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. ... moreApplicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Weight: 1kg Product size: 21*14*6cm Material: Copper, 45# steel Screw thread: 1/2-13 Application: 5/8 T-slot Purpose: tighten the ... moreworkpiece to be processed on the T-slot table Features:Tighten the workpiece from the side to facilitate top surface machining Packing list: 6 eccentric bolts + 4 T-nuts + 6 hex stoppers + 2 hex wrenches.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Purpose: tighten the workpiece to be processed on the T-slot table. Features: Tighten the workpiece from the side to facilitate top surface machining. ... morePurposetighten the workpiece. Features★Stable characteristic, high reliability★.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Use With Vises, Angle Plates, Jigs, and Etc. Serves As A Rigid Stop For Milling Set-Up. Made Of Hardened Tool Steel. Universal Work Stop. Rod : 9-5/8" ... moreLong x 3/8" Estimate Only . Unit Weight: 3 Lbs Estimate Only .
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States K72 4-jaw self-centering chucks with independent jaws feature short cylindrical center mounting. It can be used to extend machine functions. Both sides ... moreof jaw teeth and guides are ground and hardened.
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest Craftsman / Inventor ... morethe industry has ever seen. For Bridgeport type mill, CNC mill, anything using a milling vise.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: By placing in your machine & expanding the arbor, you can machine the arbors to the precise diameter & length for your job Used ... morein research & development work, for large or small shops in lathes, milling machines, grinders, chucks, collets, fixtures Package Includes: 8 × Expanding Arbors Set Mandrels 1/4" To 1-1/4" Lathe Milling With Allen Wrenches on a handy wooden stand Supplied with alloy wrenches and wooden stand Notes: We strongly recommend professional installation..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step ... moreblock width (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. UPC Does not apply Brand Thomletha MPN GM455240MD Tool Type Clamping Kit.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States R8 Collet Stand NEW 202-5141. Holds 12 Collets Closeable cover protects collets from chips at all times Holds up to 16 R8 collets Angled for visibility ... moreand easier selection of stored tools Mountable on machine or workbench Heavy gauge steel Tough. Epoxy finish for long lasting protection: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at DISCOUNTMACHINE@AOL.COM di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e13a71bda-0x100-
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States ER-32 Square Collet Block Spring Chunk Holder. For Parallel, Square, Or Hex shapes As Well As For Cross Hole Drilling At 60, 90 or 120 Degrees. Material: ... moreHarden Steel. Unit Weight: 1.25 Lbs. B rand New.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life. It has two sets of jaws that can hold ... moreindustrial parts in the range of 0.078" / 2 mm - 3.54" / 90 mm.
Buy It Now
$19.00 Shipping Condition: New Location: Chino, United States Clamping range is up to 2-1/16". Clamping width is 1-5/8". 1/2" Adjustable Milling Machine Table Clamp Assembly. One piece assembly allows quick set-up ... moreon mill tables with t-slot. Attached brass shims protect machine table and work piece.
Buy It Now
Free Shipping Condition: Used Location: Coventry, United States Has "surface grinder only" engraved on the top. could use a good clean up but it works great. see all pictures.
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States ER-40 collets have a wide range of clamping. The sizes listed are the max sizes that the collet can hold. Collets have a range of 1mm (.039″) For example, ... morea 5mm ER-40 collet can clamp a max size of 5mm, but can clamp down to 4mm.
Buy It Now
Free Shipping Condition: New Location: Meadow Lands, United States It is essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filling, chiseling and some of assembly ... moreand removal jobs. Our cross slide vise is an essential tool for fitters, 360-degree swivel base, flexible operation. Our clamping vise has powerful clamping force and can fix workpieces very securely. Features ---Durable material. The vise is made of high-quality cast iron, with strong toughness, high tensile strength, and wear resistance. Internal refine grinding treatment, smooth use, no jamming, rust, and corrosion resistance. ---Plat nose pliers. When clamping the work piece, the work piece is in the jaws and the force is even, and it can be used normally. Jaw opening capacity: 2.5 inch, 3 inch, or 4 inch.
|
|
|
|
MILLING MACHINE TEEL CLAMPS STRAPS MISC LOT OF 6 PCS 2-3/4 - 3-1/2" LONG #9431
Description: MILLING MACHINE ALUMINUM CLAMPS STRAPS MISC. LOT OF 6 PCS. 2-3/4" LONG- 3-1/2" LONG USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in ... moreour ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. U
|
|
|
MILLING MACHINE TOE CLAMPS STRAPS 5/8" 5-3/4" AND 6-3/4" LONG X 1-3/4 X 5/8 9330
Description: TOE CLAMPS STRAPS 5/8" 5-3/4 AND 6-3/4" LENGTHS 1-3/4" WIDE X 5/8" THICK QUANTITY: 2 USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described ... morein our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or g
|
|
|
MILLING MACHINE CLAMPS STRAPS 3 X 1-1/4 X 5/8 X 3/8" SLOTS (LOT OF 2) #9356
Description: MILLING MACHINE CLAMPS STRAPS 3" LONG X 1-1/4" WIDE X 5/8" THICK X 3/8" SLOTS(LOT OF 2) USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as ... moredescribed in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty o
|
|
|
MILLING MACHINE TOE HEEL CLAMPS STRAPS 8-1/2 X 2-9/16 X 3/4 (QTY. 2) #9336
Description: MILLING MACHINE TOE HEEL CLAMPS STRAPS 8-1/2" LONG X 2-9/16" WIDE X 3/4" THICK 3/4" HEEL 1" TOE(QUANTITY OF 2) USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are ... moreaccepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are s
|
|
|
MILLING MACHINE MISC 1/2" CLAMPS STRAPS 3-1/4 - 5-13/16" LONG (QTY. 4) #9334
Description: MISC. LOT OF 1/2" CLAMPS STRAPS 3-1/4- 5-3/16" LONG(MISC. LOT OF 4) QUANTITY: 8 USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ... moread. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unles
|
|
|
MILLING MACHINE RADIUS CLAMPS STRAPS 5/8 X 1/2" (LOT OF 4) #9335
Description: RADIUS CLAMPS STRAPS(3) 5/8" 1) 1/2" 2" 6" LONG(QUANTITY OF 4) USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We ... moremust be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless state
|
|
|
MILLING MACHINE MISC HEEL TYPE CLAMPS STRAPS 3/8D - 3/4 D STUD SIZE #9459
Description: MILLING MACHINE MISC. HEEL TYPE CLAMPS AND STRAPS 3/8 DIA- 3/4 DIA STUD STYLE(7) ITEMS IN LOT USED ITEM. SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in ... moreour ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee.
|
|
|
Lot of Milling Clamps Hold Downs, with T-Slot Nuts, for 3/4 inch Slot Machine
I do a little milling for fun. I bought these at an auction many years ago. But they are too big for my machine. The T-slot nuts are 11/16 wide, so I assume they are designed to use in a machine with 3/4 slots. They have a total height of 1 1/8(5/8 for the narrow part and 1/4 for the bottom wide part) and width of 1 1/8. The clamps that they are assembled with are 3 inches long. As you can see you get 3 of these assemblies. If I take these apart I can squeeze everything into a small flat rate box. You also get: 2 tapered clamps(nice) 1 thick 45 degree clamp and 17 rectangular clamps. some of which are threaded for 3/8-16 bolts and some are just drilled) Let me know if you need further information. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Set of (8) Vulcan 8" Milling Machine Clamps No. 78
Set of(8) Vulcan 8" Milling Machine Clamps No. 78 Quantity Available: 1 Shipping Weight: 35 lbs(AEC 177 3.4.A L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and ... moreis an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Pl
|
|
|
GAC Adjustable milling Table Clamp Set vintage machine hold down clamps
vintage milling table clamps. let me kno which size t slot bolts u need. I'll include it for free if i have some in my bin of tools. MADE BY: General Alliance Corp. San Diego California.
|
|
|
2 Nice HITE RITE USA made 525L Adjustable Milling Machine Hold Down Clamps
This sale is for a pair(2) Nice used HITE RITE USA made No. 525L Adjustable Milling Machine Hold Down Clamps. The clamps are used so have marks and scratches from normal use please see photographs for detail. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability ... moreof the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the u
|
|
|
Double Action Edge Counter Milling Machine Hold Down Clamps, Model 101B
J& S Tool Double Action Edge Counter Clamps. Model 101B You no longer need to use improvised and haphazard stops and locating devices. The counter clamp. A J&S exclusive, assures a reliable, standardized alternative. IN and DOWN adjustable clamping action is provided at both ends of the work piece insuring that the work-piece will be totally stabilized during the full matching operation. Are constructed from hardened and blackened steel. A special process designed to retard breakage and prevent flaws Will combine orders to reduce shipping cost. Ask for Invoice before paying
|
|
|
2 Double Action Edge Counter Milling Machine Hold Down Clamps,
2 hold downs 4" and a 6" both have 3/4 hole good shape
|
|
|
Armsrtong Heavy Duty Forged C-CLAMPS Lot Machine Shop Lifting Welding Milling
You are bidding on a Lot of 3 drop forged heavy duty C-Clamps. Clamps are are in good used condition. 2 Armstrong Clamps. Outside measurements appx. 10" x 7" Clamping range 1 1/4" 4 1/2" 3" Throat. 15/16 screw diameter. 1 Billings Clamp. Outside measurements appx. 8" x 6" Clamping range 1 1/2" 3 1/4" 2 1/2" Thtoat. 3/4" screw.
|
|
|
J&S Style-TE-CO Manual Edge Milling Machine Clamps - Grip Nose Style - 4 Pc Lot
Listing is for 4 Pcs. of TE-CO Manual Edge Milling Machine Clamps- Grip Nose Style- J&S Style) Manufactured by TE-CO Tooling Components. Union, Ohio The specifications are as follows: Manual Edge Clamps: Grip Nose Style: Low Overall Length(Inch) 3-7/8 Travel(Inch) 1-1/4 Width(Inch) 1-1/2 Height(Inch) 7/8 Socket Cap Screw Slot Size(Inch) 5/8 4- 1/2-13 socket head cap screws and washers are included. These clamps are used and in very good condition. Please see the pictures as they depict the condition. Email with any questions. Thanks
|
|
|
4 TE-CO 33805 Edge Clamps, Low, 1-1/2, 3-5/16, 3/4, 1/2,milling machine,lathe
Nice set of 4 clamps.Good shape
|
|
|
2 NICE Jergens USA MILLING MACHINE 4-1/8" x 1-11/16" x 1-1/2" HOLD DOWN CLAMPS
This Sale is for ONE NICE and previously owned PAIR of Jergens made MILLING MACHINE HOLD DOWN CLAMPS. These clamps are manufactured from forged steel and are approximately 4-1/8" wide x 1-11/16" wide x 1-1/2" max height. There is a black finish for corrosion resistance. The joint swivels to allow clamping at various angles. There is a brass piece over the nose. Please note that the brass section has some minor tarnish. Which can be easily cleaned with use of a mild solvent and a cloth. Also one the the clamps has been customized by the previous owner to include a drilled section on the center nose through the brass and clamp. These high quality USA made CLAMPS are being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the ... moresole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advsed international bidders may have customs or dutyT charges applied by their government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the
|
|
|
Larger Step Blocks Milling Machine Hold Down Straps Clamps Machinist Tool Box Fi
Milling machine clamping blocks and straps. See pictures of actual items you will receive. Measurements are approximate. 4 enco@ 3-3/4x2-1/4x1-1/2 5 enco@ 3-3/4x2-1/4x2 3 unmarked@ 3-3/4x2-3/8x1-1/2 2 enco 4" straps 2 enco 6" straps 1 northwestern tools strap 2 smaller blocks show heavy wear on middle teeth. Many nice blocks in used condition. A few have nicks/chips. Check out my other items for more great finds. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1471b6053be-0x106-
|
|
|
SET of 2 MILLING MACHINE HOLD DOWN CLAMPS work holding tool ARMSTRONG No 54
2 Good Used Hold down Clamps Armstrong USA Approx. Dimensions: 4" Long x 1 5/8" Wide Slot: Approx. 1 1/4" x 3/4" No. 54 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SET of 4 MILLING MACHINE HOLD DOWN CLAMPS work holder 6" CL 10 CS CARR LANE
4 Good Used Hold down Clamps Mfg Unknown Approx. Dimensions: 6" Long x 1 1/4" Wide Slot: Approx. 2 3/4" x 1/2" CL 10 CS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SET of 6 MILLING MACHINE HOLD DOWN CLAMPS work holding tool ARMSTRONG No 21 USA
6 Good Used Hold down Clamps Armstrong USA Approx. Dimensions: 5" Long x 1 1/2" Wide Slot: Approx. 1 5/8" x 3/4" 1 1/2" Saddle No. 21 Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1477f82f810-0x111-
|
|
|
Assortment Of Step Blocks & Clamps For Milling Machine & Hold Down
Up for auction is an assortment of step blocks and clamps for the mill and for hold down application. All pieces are in good to very good condition.
|
|
|
Miscellaneous Clamps Clamping Kit Parts For Milling Machine Bridgeport
The longest overall length is 8" The shortest one is 2-3/4" 31 Pounds Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
|
|
|
Lot of 8 forged steel machinery,milling machine,drill press? clamps
Eighth one is the last two pictures.Found it after the first pictures.These are left over from a friends old shop.Various style/brands.Some look a little older and you can tell are made from really good steel.One has been ground on an end,and another looks like it may have been shortened a little and has part of a corner missing.Some have names,some just markings.Ken Forge 942 USA,no 78,no78,Vulcan no 48,Vulcan no 58,79-458.
|
|
|
MILLING MACHINE HOLD DOWN CLAMPS 7/8'' STUD'' YUASA INTERNATIONAL
HELLO'AS YOU CAN SEE THIS SET IS IN GREAT CONDITION. IF YOU HAVE ANY QUESTIONS. THIS SET IS MARKED'YUASA INTERNATIONAL INC. S.T. MADE IN SPAIN. I WOULD GUESS THE METAL IS HIGH GRADE. SPAIN MAKES SOME WONDERFULL GUN BARRELS. IF YOU HAVE ANY QUESTIONS. JUST ASK!
|
|
|
SET of 2 MILLING MACHINE HOLD DOWN CLAMPS work holding tool ARMSTRONG No. 54 USA
Good Used set of Hold Down ClampsArmstrong USANo. 544" long x 1 11/16" WideSlot: 1 1/4" x 3/4"Thank you for looking and Happy Bidding!
|
|
|
Pair of forged steel machinery,milling machine,drill press? clamps Jergens ☆
Pair of 2" wide clamps for machining. Forged. Made by Jergens.
|
|
|
milling machine hold down clamps 1/2''stud
HELLO'AS YOU CAN SEE THE SET IS IN GREAT CONDITION. THE STUDS ARE 1/2'THE NAME IS FADED'LOOKS LIKE'ENCO. MODEL NUMBER#22375. ANY QUESTIONS JUST ASK!THANKS FOR LOOKING.
|
|
|
Authentic Bridgeport Mill Milling Machine Clamps Clamping Kit Rack, Not Complete
1/2" Bolts. The longest one is 8" and the shortest 3" Actual Bridgeport Rack. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14a6c801b88-0x116-
|
|
|
ROCKWELL MILLING MACHINE OTHERS 3/8" FINGER CLAMPS 7/16 SLOTS
7 CLAMPS WITH 7/16" SLOT SOME ARE 13/32. ONE GOES 15/32" ALL ARE GOOD FOR 3/8" STUDS COUPLE ARE GROUND. STEPPED, MILLED ETC. SEE PHOTOS ALL ARE FULLY USEABLE HARDENED
|
|
|
Group Of 3/8" MILLING MACHINE HOLD DOWN CLAMPS mill work holding tool
Group of preowned mill clamps. The slit is 3/8" You will receive all the items you see here.
|
|
|
Milling machine hold down clamps, wedges, blocks , bolts mixed box
I have 1 mixed lot of metal machining tool clamps. Blocks, bolts, t nuts, etc. I am selling it as 1 lot as is. I do not know what all it fits or what it all is but there is appx 80 lbs of it.
|
|
|
LOT of 6 MILLING MACHINE HOLD DOWN CLAMPS work holding tool CARR LANE (3 Pairs)
6 Good Used Milling Machine Hold down Clamps 2 Carr Lane CL 30 CS 6" x 1 1/4" x 5/8" Slot: 1 1/2" x 1/2" 2 Carr Lane CL 44 CS 6" x 1 14" x 5/8" Slot: 2 3/4" x 1/2" 2 Unmarked 6" x 1 1/4" x 5/8" Slot:2 1/2" x 1/2" Thank you for looking and Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Starrett parallel clamps tool makers, machinist fits bridgeport milling machine
set of used Starrett parallel clamps tool makers. Machinist, 161-D,E,C,B,A. all in working order. overall in decent shape one of the larger clamps has mill or drill mark on it as shown in picture. selling as is. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Or shipped. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will ... morebe stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14bfc8d76d3-0x111-
|
|
 |