2 Vtg DELTA ROCKWELL D-104 & D-105 SHAPER CUTTERS 1/2" Bore HSS Blades Bits
2 Vintage Delta Rockwell D-104& D-105 Shaper Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The D-104 cutter measures 1 5/8 inches long by 1 inch wide. The D-105 cutter measures 1 5/8 inches long by 1 1/2 inches wide. They are in nice condition.
|
|
Vtg DELTA ROCKWELL No 980 SHAPER CUTTERS SET w Wood Box - 5/16" Bore HSS Bits
Vintage Delta/ Rockwell No.980 Shaper Cutters Set with Wood Box- 5/16" Bore- No Reserve. The set is not complete. It includes 26 cutters and 1 collar. The label on the front of the box is marked- Delta Milwaukee. Catalog No. 980, Delta Mfg Division, Rockwell Mfg Company, Milwaukee, Wisconsin" The cutters and collar are in very good condition. The wood box is in fair condition. It looks like it broke apart at the corners and was glued back together(see photos)
|
|
3 Vtg DELTA ROCKWELL SHAPER D-107 D-127 D-130 Rabbet CUTTERS 1/2" Bore HSS Bits
3 Vintage Delta Rockwell Shaper D-107. D-127& D-130 Straight Rabbeting Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long. The D-127 cutter measures 3/8" wide. The D-107 cutter measures 1/2" wide. The D-130 cutter measures 3/4" wide. They are in very good condition.
|
|
9 Vtg DELTA ROCKWELL SHAPER Spacers COLLARS SET - 1/2" Bore Lot - No Cutters
9 Vintage Delta Rockwell Shaper Spacer Collars with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The sizes are as follows- 2) 3/4" outside diameter. 1) 1" diameter, 2) 1 1/8" diameter, 3) 1 1/4" diameter and(1) 1 3/8" diameter. They are in nice condition.
|
|
Vtg DELTA ROCKWELL D-104 Straight SHAPER CUTTER 1/2" Bore HSS Blade Bit Tool
Vintage Delta Rockwell D-104 Straight Shaper Cutter with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. It measures 1 5/8 inches long by 1 inch wide and is marked- D-104" It's in good condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1443dee46a7-0xd1-
|
|
Vtg DELTA ROCKWELL D-105 Straight SHAPER CUTTER 1/2" Bore HSS Blade Bit Tool
Vintage Delta Rockwell D-105 Straight Shaper Cutter with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The cutting edges measure 1 1/2 inches long and it's marked- D-104" The cutting edges have a few tiny chips.
|
|
2 Vtg DELTA ROCKWELL SHAPER D-108 Straight CUTTERS 1/2" Bore HSS Bits Tools
2 Vintage Delta Rockwell Shaper D-108 Straight Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long by 1/4 inch wide and are marked- D-108" They are in good condition.
|
|
Vtg DELTA ROCKWELL SHAPER Spindle Assembly SR 205 with Pulley - Tool Parts
Vintage Delta Rockwell Shaper Spindle Assembly SR 205 with Pulley- No Reserve. It's marked- SR 205" It's in very good condition and it works great.
|
|
Vtg DELTA ROCKWELL SHAPER TABLE TOP w Bolts - Tool Part SR 101
Vintage Delta Rockwell Shaper Table Top with Bolts- No Reserve. It measures 18 inches long by 15 1/2 inches wide and weighs 30 lbs. It's marked- Delta Mfg Division. Rockwell Manufacturing Co, Milwaukee, Wisconsin, Serial No 80-9236" The casting is marked underneath the bottom- SR 101" Included are the two top bolts with wing nuts and seven mounting bolts for underneath. It's in very good condition.
|
|
Vtg DELTA ROCKWELL 2606 1/2 HP 3450 RPM Reversible SHAPER MOTOR - 5/8" Shaft
Vintage Delta Model 2606- 1/2HP 3450 RPM Reversible Motor with Delta No 1116 Reversible Switch. Pulley and Delta No 49-106 Belt- Made in U.S.A. No Reserve. It's in very good condition and is ready for use. The motor runs great. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-148e0649ad3-0x10c-
|
|
Vtg DELTA ROCKWELL SHAPER Base Legs SR 278 & SR279 & Motor Mounting Plate SR 275
Vintage Delta Rockwell Shaper Front and Back Base Legs(SR 278& SR 279) with Pulley/ Belt Guard Shield and Motor Mounting Plate(SR 275) No Reserve. It's all in very good condition with no cracks or chips to the castings.
|
|
Vtg Delta Rockwell Craftsman Shaper Fence Router Table Atlas Tool
Here's an older shaper fence from an unknown brand machine. Cast numbers are 3090-3-1. This has dark grey/blue crinkle finish. All parts move but the infeed fence needs oiling. There are no cracks or repairs. It is very well made. Mounting slots are 1/2" wide by 2" long. Mounting slots on center length is 6.5" Fence face length is 12" without the wood fence-just cast. Inside width of the cutter housing is 4.5" so you should have plenty of room to spin large diameter cutters. Housing height clearance is 2.25" but the top is open for clearance. The fence is heavy and very well made. It would also work nicely on a homemade router table. Plz ask any questions and I will answer. I am hobbiest woodworking and I own and use a large shaper and router table. I will remove the wood fence for cheaper shipping. Thanks.
|
|
Vtg DELTA ROCKWELL SHAPER Motor Belt GUARD SHIELDS for SR 279 Rear Base Legs
2 Vintage Delta Rockwell Shaper Motor Pulley Belt Guards Shields with Original Bolts- Connects to Rear Base Legs SR 279- No Reserve. They are in good condition
|
|
2 Vtg DELTA ROCKWELL SHAPER SR 278 FRONT BASE LEGS - Wood Working Power Tool
2 Vintage Delta Rockwell Shaper SR 278 Front Base Legs. They measure 6 1/8 inches tall and are marked- SR 278. They are in good condition.
|
|
Vtg DELTA ROCKWELL SHAPER Rear Base Legs SR 279 - Power Tool Part
Vintage Delta Rockwell Shaper Rear Base Legs SR 279- No Reserve. It measures 15 3/4 inches long by 6 1/8 inches tall. It's in good condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149684940e5-0x108-
|
|
Vtg DELTA ROCKWELL SHAPER Base Motor Mounting Plate SR 275 - Power Tool Part
Vintage Delta Rockwell Shaper Base Motor Mounting Plate#SR 275 with Original Bolts- No Reserve. It measures 9 inches long by 7 1/2 inches wide. It's in very good condition.
|
|