BEVEL EDGE CUTTERS FOR SHAPER OR MOLDER - WOOD MOLDING #3
Up for auction is a pair of used heavy duty cutters for a shaper or molder cutter head. They are 1/4" thick. 4" long and 2-1/4" high. They have the adjusting notches on them. Check out my other auctions for more cutters. Thanks for looking and good luck bidding. I combine shipping. $5 for the first item and only $2 for any additional items.
|
|
Shaper cutters , High speed 1 1/2" radius with rub collars 2 1/4" x 3/4" bore
Shaper cutters. High speed 1 1/2" radius slightly elliptical, rub collars are 2 1/4" dia. x 3/4" tall 3/4" bore, Blades are in good shape and don't need to be sharpened. Collars have light surface rust.
|
|
Delta Shaper Model 1180 with Cutters/blades/bits
After a little investigating(by searching the patent# on top of the machine) I found the shaper is the Delta 1180 shaper made in 1936. It has a Furnas Electric Co. forward/reversible switch. 1 1/2 horse power motor and apparently is a popular item among vintage woodworking machine enthusiasts. I bought about 10 years ago and never used. It has a spindle where the blades are put. It has MANY SHARP blades(~20) with it and a rolling stand as pictured. It appears a craftsman made the cabinet. It is really well made with a metal table gauge inlaid in the wood surface. The manual for it is here: http:vintagemachinery.org/pubs/1141/1875.pdf Local pick up. Or if you want I can arrange to have it shipped and your cost. Posted with
|
|
Bosch Carbide Tipped shaper Style & Rail Cutters
This auction is for a set of bosch style& rail shaper cutters. These are carbide ones, model 87922, set consist of 87915 cove&bead cope R.H, 87919 spacer, 87916 cove&bead cope L.H. 87908 cove&bead mldg R.H. 87917 1/4" cove&bead straight cutter, 87907 cove&bead mldg L.H. any questions e-mail me, Thanks for looking.
|
|
Delta 43-431X Wood Shaper With Power Feed And Cutters
The DELTA 43-431X X5 3/4-Inch Solid Spindle 3 HP Shaper is designed for optimum efficiency during professional use. The shaper's 3 HP motor. Spindle, housing, and raising/lowering mechanism are contained in a secure unit built into the underside of the heavy-duty 40-by-27-inch table. This arrangement ensures a 90-degree spindle/table alignment. The motor includes forward and reverse speeds at 7,000 and 10,000 RPM, respectively. A unique Poly-V drive system channels torque more efficiently to the 3/4 inch spindle. Ball bearings with permanent lubrication help prevent distortion at high operation speeds. The table includes cast-iron extension wings, as well as a ribbed underside construction to prevent warping. The tapered spindle construction can handle seven spindle sizes and makes changing accessory spindles a breeze. It can also accommodate ... morea variety of shaper cutters. Likewise the table opening size can change to suite your project by removing special table insert rings. I bought this shaper brand new about 8 years ago. Used very little looks and runs perfect. Comes with a set of Ogee raised panel door cutters and a few different round over cutters all still very sharp. Has a Delta 34-985 1/6th hp power feeder with all the gears and works great. The machine comes with the delta mobile base for easy moving. The shapers run less than 1000 feet of material. Posted with
|
|
2 Vtg DELTA ROCKWELL D-104 & D-105 SHAPER CUTTERS 1/2" Bore HSS Blades Bits
2 Vintage Delta Rockwell D-104& D-105 Shaper Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The D-104 cutter measures 1 5/8 inches long by 1 inch wide. The D-105 cutter measures 1 5/8 inches long by 1 1/2 inches wide. They are in nice condition.
|
|
Vintage DELTA ROCKWELL No 1182 Shaper Cutters Set WOOD BOX 1/2" Bore HSS Bits
Vintage Delta/ Rockwell No.1182 Shaper Cutters Set Wood Box- BOX ONLY- NO CUTTERS- No Reserve. It measures 6 1/2 inches long. 4 5/8 inches wide and 2 5/8 inches tall. The label on the front is marked- Delta Mfg Co, Rockwell Mfg Co, No.1182, Set of Shaper Cutters, Milwaukee, Wis. U.S.A. The cutters that went in this set were 1/2" bore. It's in very good condition. The front has a tiny hole drilled which was likely for a small knob.
|
|
Vintage DELTA ROCKWELL D-125 & D-126 SHAPER CUTTERS 1/2" Bore HSS Blades Bits
Vintage Delta Rockwell D-125& D-126 Shaper Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long by 11/16 inch wide and is marked- D-125" and"D-126" They are in nice condition.
|
|
Slotted Collars and Knives for Shaper / Shaper Cutters
Slotted Collars and Knives for Shaper. Fits 3/4" spindle. Total of 13 knives. Most of the knives have a nice sharp edge. Check my other items for shaper cutters and shaper accessories.
|
|
Vtg DELTA ROCKWELL No 980 SHAPER CUTTERS SET w Wood Box - 5/16" Bore HSS Bits
Vintage Delta/ Rockwell No.980 Shaper Cutters Set with Wood Box- 5/16" Bore- No Reserve. The set is not complete. It includes 26 cutters and 1 collar. The label on the front of the box is marked- Delta Milwaukee. Catalog No. 980, Delta Mfg Division, Rockwell Mfg Company, Milwaukee, Wisconsin" The cutters and collar are in very good condition. The wood box is in fair condition. It looks like it broke apart at the corners and was glued back together(see photos)
|
|
3 Vtg DELTA ROCKWELL SHAPER D-107 D-127 D-130 Rabbet CUTTERS 1/2" Bore HSS Bits
3 Vintage Delta Rockwell Shaper D-107. D-127& D-130 Straight Rabbeting Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long. The D-127 cutter measures 3/8" wide. The D-107 cutter measures 1/2" wide. The D-130 cutter measures 3/4" wide. They are in very good condition.
|
|
9 Vtg DELTA ROCKWELL SHAPER Spacers COLLARS SET - 1/2" Bore Lot - No Cutters
9 Vintage Delta Rockwell Shaper Spacer Collars with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The sizes are as follows- 2) 3/4" outside diameter. 1) 1" diameter, 2) 1 1/8" diameter, 3) 1 1/4" diameter and(1) 1 3/8" diameter. They are in nice condition.
|
|
2 Vintage DELTA ROCKWELL D-120 & D-121 SHAPER CUTTERS 1/2" Bore HSS Blades Bits
Vintage Delta Rockwell D-120& D-121 Shaper Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. The D-120 cutter measures 1 3/4 inches long by 3/4 inch wide. The D-121 cutter measures 1 5/8 inches long by 9/16 inch wide. They are in very good condition.
|
|
2 Vintage DELTA ROCKWELL D-123 & D-124 SHAPER CUTTERS 1/2" Bore HSS Blades Bits
Vintage Delta Rockwell D-123& D-124 Shaper Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 5/8 inches long by 3/8 inch wide and are marked- D-123" and"D-124" They are in nice condition. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1443df43e01-0xef-
|
|
2 Vintage DELTA ROCKWELL SHAPER D-109 CUTTERS 1/2" Bore HSS Bits U.S.A. Tools
2 Vintage Delta Rockwell Shaper D-109 Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long by 1/4 inch wide and are marked- D-109" They are in nice condition.
|
|
2 Vintage DELTA ROCKWELL Shaper Cutters Set WOOD BOXES 1/2" Bore HSS Bits
2 Vintage Delta/ Rockwell Shaper Cutters Set Wood Boxes- BOXES ONLY- NO CUTTERS- No Reserve. They measures 6 1/2 inches long. 4 1/2 inches wide and 2 5/8 inches tall. They are in good condition. They have some light scratches and light wear. Each box has a small screw hole on the front side where a former owner had a knob. One box has a small chip to the back top edge.
|
|
2 Vtg DELTA ROCKWELL SHAPER D-108 Straight CUTTERS 1/2" Bore HSS Bits Tools
2 Vintage Delta Rockwell Shaper D-108 Straight Cutters with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. They measure 1 3/4 inches long by 1/4 inch wide and are marked- D-108" They are in good condition.
|
|
Two Carbide Shaper Cutters 1 1/4" arbor
Up for sale two for the price of one Two Carbide Shaper Cutters 1 1/4" arbor. Two shaper cutters that were bolted together so I'm selling them together. The top one is 1 1/16" ht. and the bottom one is 1/2" ht. The carbide is in good shape with no nicks or chips and the carbide is sharp. I have a number of cutters up for sale at the same time and will be glad to combine purchases for cost savings in shipping. All cutters are wrapped in cloth and then bubble wrapped for maximum protection.
|
|
Bosch Carbide Tipped Shaper Cutters #87994
Bosch Carbide Tipped Shaper Cutter Ogee Stile and Rail Set. Gently used and in excellent condition. Includes Ogee Stile. 1/4" Cove& Bead Straight; 1/2" Straight; Rail for Ogee Stile; Spacer and 1/2" Straight. Maximum RPM is 13,000. There is a 3/4" arbor hole with 1/2" Bushing. Also included is a Shaper Handbook with lots of information. To purchase brand new, the set, with the book, would cost $ 340.00. This is an absolute great deal. Buyer pays for all shipping.
|
|
Rockwell Wood Shaper and Stand with 16 Cutters, ½” bore
Rockwell Wood Shaper and Stand with 16 Cutters. ½” bore This vintage shaper is in good working order. It’s spent a lot more time idle than working. As you can see in the photos. There is light surface rust on the table and stand, but all components are strong and sturdy. Last tested on March 18, 2014. The table is 18” x 15 ½” The fence is 50” long. The shaper is powered by a single phase. 115 volt, ½ hp motor. All of the cutters are used but in good shape(see photos) Fifteen cutters are pictured and one is on the spindle. Most of the cutters are unmarked. The 6 that are marked are as follows: D-103 LS-16 LS-19 LS-21 LS-28 LS-29 Free pick-up on the east side of Houston. 2 blocks from I-10. Thanks for looking!
|
|
Lot of 11 Rockwell Shaper Cutters
Up for sale are 11 Rockwell shaper cutters. All are used and have a very slight rust and saw dust. Included with box: 09-196 09-247 09-110 09-138 09-103 09-197 09-120 09-100 43-902 more rust than others Without box: D-201 The other is rusted and I was unable to read the number. Posted with
|
|
15 Vintage Cutters for Rockwell Wood Shaper, ½” bore
15 Cutters. ½” bore All of the cutters are used but in good shape(see photos) Most are unmarked. The 6 that are marked are as follows: D-103 LS-16 LS-19 LS-21 LS-28 LS-29 Free shipping. Thanks for looking!
|
|
Two Carbide Router Shaper Cutters
The orange cutter has no visible nicks or defects in carbide. the other cutter non-painted has small visible nicks three photos show the nicks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14781bc92a9-0x110-
|
|
DELTA 43-120 SPINDLE SHAPER-110 OR 220-1.5HP-W/MANY CUTTERS #189KG-7
Delta Spindle Shaper Model 43-120 1.5 HP. Single Phase, Reversing Can be run 110 or 220 Many Cutters. Most are Carbide Includes fence with dust connection Runs great. We're happy to show it. Please contact us to set something up. Will consider all reasonable offers. Is in a workshop in Shelburne Falls. MA For local pick up only Thank you. Please Note: MA residents will be charged sales tax. Thank You. Domestic Shipping: We ship products using USPS. We don’t charge a handling fee. The shipping charge is the actual shipping amount. Local pick up is available on request. Payment: We only accept PayPal. Return Policy: We are happy to accept returns if the item is not as described. Returns are accepted within 14 days of the close of the transaction. Please contact us if you are unhappy and you feel the item was misrepresented. We will do all ... morewe can to make it right with you. We pride ourselves on our accurate descriptions, any errors are inadvertent. Feedback: We are happy to leave feedback for you. We would very much appreciate that once you receive your item in good order. You also leave feedback for us. Your feedback is critical to our Ebay business. If you feel compelled to leave neutral or negative feedback please contact us. If you are not satisfied with our transaction, PLEASE LET US KNOW. So we can fix it. Don’t hesitate to contact us for any reason, we are here to help. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-1484b05af2f-0x10a-
|
|
Antique Craftsman shaper cutters vintage lot wood working shop tool hardware
I have a nice lot of Chrome vanadium alloy steel shaper cutters for your consideration. These fit a 1/2 inch spindle. There are 11 in this lot with 4 of the original boxes. I am assuming the 4 that came in the boxes are included although I had no way to reference them. Fabulous versatile lot for your wood working shop. Excellent vintage quality all for a low start and no reserve as always. Questions welcome other wise what you see is what you get. Flat ship is 6.60 to the US. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14968483080-0x10d-
|
|
Vintage Craftsman Boxed Set of 6 Shaper Cutters, Free Ship!
Up for auction is an older set of six Craftsman shaper cutters. With 1/2" arbors. The set comes in the original cardboard box. It looks like two or three of the cutters have been used, but overall they are in very good condition. The set includes the following cutters: reversible glue joint, 1/2" radius base shoe, 1" jointer, drop leaf cover, drop leaf base, and 3/8" lip cupboard, or cabinet door. There are no nuts or washers, just the six cutters and the box as shown. Winning bidder to receive FREE carefully packaged priority shipping in the US. NO international shipping. I accept Paypal only. Thanks for looking!
|
|
DELTA ROCKWELL HEAVY DUTY SHAPER ROUTER TABLE, SERIAL NO 105-5341 WITH CUTTERS
Description Delta Rockwell single phase 220V heavy duty shaper table. Equipment is in excellent condition and was well-cared for by my father. A carpenter by trade. Table top measures 28 x 27 inches. Unit powers up and cutter spins. Serial number on unit is 105-5341 which indicates a date of manufacture of 1953. The year 1953 is the changeover from manufacturing operations in Milwaukee. WI to Bellefountaine, Ohio. Also included in the purchase are all of the shaper table cutting tools seen in the pictures. Payment must be received within 48 hours after end of auction(Buy-It-Now" items require immediate payment) We reserve the right to relist an item and file a unpaid item case with eBay for any item where payment has not been recieved with 48 hours after end of auction. At the present time. The only accepted form of payment is PayPal. ... moreItem(s) will be shipped within forty-eight(48) hours after payment has been received. Insurance is included in shipping charge for all items with a sale price of $250.00 or greater. Expedited shipping is available for an additional cost. Please contact us directly for pricing before submitting your payment if you would prefer some form of expedited shipping. Should you not be completely satisfied with your purchase. We will gladly accept a return on any item that was purchased in"NEW" or"NEW WITH TAGS" condition. Any"PRE-OWNED" or"NEW WITH DEFECTS" merchandise sales are considered FINAL and no returns are offered on these items. To complete a return. You must notify us via email of your intention to do so. We will provide you with a USPS or UPS return shipping label and additional information on where to send the item. Please write the original eBay item number on the outside of the package. The following conditions apply to all returns: Item(s) must be returned in the same condition as purchased. With ALL TAGS ATTACHED. Item(s) must be returned within 14 days of receipt(item needs to arrive to us within this time frame) Shipping charges
|
|
Delta Rockwell wood shaper cutters & bushings BOX LOT 27 pcs total
Delta Wood Shaper Cutters and Bushings for 1/2" arbors. 27 pieces in total. Being sold as one lot. Some of the boxes are clearly marked with factory part number. Others have numbers written on them in pen or pencil. Numbers and writing that I can make out on cutter boxes include: D-130 D-125 D-107 D-108 D-120(ogee) D-103 D-106 D-131(glue joint) D-105 There are(7) loose cutters with no corresponding boxes There are(11) bushings of varying thickness. Comes with the cigar box just as I found them. Hopefully someone has use for them. Some surface rust from sitting on the shelf and ambient moisture. A little cleanup and they should be fine. FREE SHIPPING to Lower 48 states.
|
|
Wisconsin Knife Works Wood Moulder Shaper Cutter Head HR1648B Bevel Cutters (52)
2 Wood Moulder Cutter Heads and 52 sets of 2 each Bevel Cutters from 4 inch approx to 1 inch approx. See photos and measuring ruler. Additional machine parts are included and shown in the photo. I have no knowledge/experience with these items or their operation. You are buying these items as shown in the photos. Thanks for visiting my site. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 Freud 5" Raised Panel Shaper Cutters 210 & 211
You are bidding on 2 raised paned shaper cutters made by Freud. These cutters were each only used one time and they are still razor sharp. They are each 5" x 3/4" and the Item numbers are EC210 and EC211. These shaper cutters retail for $139.97 each in the Woodworker's Supply catalog. Buyer must pay within 24 hours of the end of the auction.
|
|