In 
 
Order by: 
Available to: 
Price: 
 - 
$
2,632.5
Buy It Now
$0 Shipping
Condition: Used
Location: Weatherford,TX,USA
Quantity of 3- 500 gallon propane tanks and one 250 gallon propane tank. Bought for use in building a Murphy's machines biodiesel plant. I have the ... morecomplete kit for building the 500 gallon biodiesel plant that can be purchased with the complete set of plans at a great discount if you buy the propane tanks. I also have all the steel cut for the legs to stand the tanks up for the batch plant. Call with questions 585 739 9593 Posted with
$
3,800
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Cairo,NY,USA
$
900
Buy It Now
$0 Shipping
Condition: Used
Location: Duncannon,PA,USA
This is a PA biodiesel kit. It is fully assembled and working. There a fe gallons of WVO/WMO left in the unit. I am getting out of WVO for now. I will ... morealso throw in 4 steel Jerry cans and a barrel hand pump that I use to collect WVO. http:pabiodieselsupply.com/shop/wvo-centrifuge-oil-centrifuge-filtration-unit-closed-drum/ Local pickup or will deliver for $.57 a loaded mile up to 200 miles. Delivery could take a week to organize. Posted with
$
25.87
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
Automatic Shut Off Fueling Nozzle Gas Diesel Kerosene Biodiesel Fuel Refilling Auto Fuel Nozzle has an unleaded spout and can be used with leaded and ... moreunleaded gasoline. Diesel fuel and kerosene. Plastic-coated hand lever and 1-1/4" adapter. For use with 115V and 12V pumps. Automatic Fuel Nozzle is able to lock into holder. It is so nice to leave on and have an auto shut off without spill. Item# CP16211A, Ship Weight 2.6 lbs, Compatible With Unleaded. Leaded, kerosene, and diesel, Works With 115V and 12V pumps, Inlet Port(in. 1" or 1-1/4" NPT. Dia. of Spout(in. 13/16" unleaded spout. Material Type Plastic coated hand lever, Working PSI, 26psi, Flow Rate, 0-60 L/min(0-16GPM) Shipping Policies Domestic Estimated delivery time: 5-8 days to your door FREE Shipping to low 48 States(Seller will decide shipping carrier) Excluded AK. HI, PR, APO, GUAM, VI, or PO Box, Shipping quote: For shipping rates. Please see the table above. The flat rates quoted in the table will apply for most destinations in the countries/ states listed. Occasionally(usually, but not always in remote/rural areas) some addresses will not qualify for the service or rates that are quoted. In this case, we reserve the right to cancel the transaction, and we will not be obligated to honor the quoted shipping price. Alternately, the Purchaser is always welcome to pay the additional shipping expenses to their location. Canadian buyers are responsible for Duty Tax and Broker Fee. Not all Providence are cover by our shipping. Please contact us before making purchase. International Buyers: Import duties. Taxes, charges and brokerage fees(typically collected upon delivery or pickup) are the buyer's responsibility and are not included in the item's price or shipping charges. Please check with your country's customs office prior to bidding/buying to determine what the costs will be, and to ensure the item you are purchasing is legal in your country. Term of Sales: Once you've committed to buy. Please make payment within 5 da
$
49.95
Buy It Now
$0 Shipping
Condition: New
Location: Lapeer,MI,USA
$
54.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
This Item is Brand New! This pump is only for transfer Diesel Fuel. Not for water. Gasonline, or Petroleum gas. FEATURES: Flowrate: 11 GMP, Power: 200W, ... moreSuction Distance: 10ft, Head: 20ft, Rotating Speed: 3500RPM max, size 8" x 6-1/2" and Height 4-1/2" without handle Hoses are not included. fitting is about 7/8" to 1" 5ft power cord Shipping Policies Domestic Estimated delivery time: 5-8 days to your door. We do not guarantee transist time. FREE Shipping to Lower Continental 48 States. Seller will decide shipping carrier) Excluded AK. HI, PR, APO, GUAM, VI, or PO Box. Shipping quote: For shipping rates. Please see the table above. The flat rates quoted in the table will apply for most destinations in the countries/ states listed. Occasionally(usually, but not always in remote/rural areas) some addresses will not qualify for the service or rates that are quoted. In this case, we reserve the right to cancel the transaction, and we will not be obligated to honor the quoted shipping price. Alternately, the Purchaser is always welcome to pay the additional shipping expenses to their location. Canada shipping is Available by UPS Standard Ground services. Canadian buyers are responsible for Duty Tax. Not all Providence are cover by our shipping. Please contact us before making purchase. International Buyers: Import duties. Taxes, charges and brokerage fees(typically collected upon delivery or pickup) are the buyer's responsibility and are not included in the item's price or shipping charges. Please check with your country's customs office prior to bidding/buying to determine what the costs will be, and to ensure the item you are purchasing is legal in your country. We only ship to the address that is giving on your PayPal payment. We do not accept email or phone call to made changes to the shipping address. Due to fraud and other reasons. We reserve the right to limit sales to certain countries, and the right to block/ cancel bids for any reason, such as where seller protection is no
$
12,152.8
Buy It Now
$495 Shipping
Condition: New
Location: Mosinee,WI,USA
You are looking at our model BD65 Commercial Biodiesel Processor; capable of producing 450 gallons of ASTM Spec Biodiesel Fuel every 8 hours. What is ... morea realistic SAVINGS BENEFIT of producing your own fuel? Follow the link below for a breakdown; http:www.youtube.com/watch?v=-4MU-fHIPCs&feature=youtu.be At a height of 80 inches and a foot print of 49 inches by 49 inches. The BD65 is extremely efficient and portable. The batch size is 65 gallons. And it will take a little over an hour for the first batch. While the first batch is processing. You can be de/watering and pre-heating your second batch, and stay with me here. While the second batch is processing. Your are pulling glycerol from batch number one and sending it through the Freedom Clean Dry Wash Tower and into storage or your diesel vehicle, all while batch number 3 is de/watering and pre-heating. All this is accomplished with minimal hands on time. You wll need to spend about 15 minutes of time per batch. Then set your timer and go about your day. Your new BD65 will be built with our NEW Control panel. It will feature a 6 hour master timer switch as well as a timer for Processing and Methanol Flash for the highest possible fuel quality. Your BD65 will be shipped with everything you need to get started. You just need to supply the waste veggie oil and Methanol. Here is a list of everything included; BD65 Commercial Biodiesel Processor/Biodiesel Kit(450 Gallons Per Day) Features of the BD65 include: 80 Gallon Preheat Tank with 4500 Watt Stainless Steel Element. Galvanized Removable Dust Covers for Both the Preheat Tank and the Settlement Tank. 130 Gallon Settlement Tank with 5500 Watt Stainless Steel Element for Methanol Flash. Fuse Protected Circuitry with UL Approved Control Panel. Timer Controlled Processor. 0ne ¾ HP Pump and one 1/2 HP pump. 75 Gallon Spill Containment Pallet. 10 KG Freedom Clean Dry Wash Tower. Each Processor Is Shipped Fully Assembled. Tested, and Ready to Run Each Processor is Shipped with the following items: 10KG Freedom Cl
$
47.59
Buy It Now
$0 Shipping
Condition: New
Location: Cranbury,NJ,USA
$
27,000
Buy It Now
$0 Shipping
Condition: Used
Location: Rutherfordton,NC,USA
$
598
Buy It Now
$0 Shipping
Condition: Used
Location: Atwater,CA,USA
$
199
Buy It Now
$0 Shipping
Condition: New
Location: Lincolnton,NC,USA
$
50.29
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
6,184
Buy It Now
$345 Shipping
Condition: New
Location: Mosinee,WI,USA
$
1,934
Buy It Now
Free Shipping
Condition: New
Location: Austell,GA,USA
Centrifuge Package: Extreme Raw Power Centrifuge w/Heater 230V Let the Machine do the Work Get a tool to save you time. Money and stress Picture this: ... moreIt’s Saturday morning and after a week of heavy driving to and from work and hauling around the kids. You must refuel. With a deep seated satisfaction in knowing that you’re done being mugged by the gas stations. You set out turn some waste oil you’ve collected into fuel. You walk into your garage, flick a switch and open a valve. Your work is done. The machine will take over, turning the garbage into liquid gold. It is time to leave and let the centrifuge do the work, there’s no need to babysit. I three short hours your 50 gallons of fuel will be ready. You now have the freedom to go grab a cup of coffee, tinker with your car/truck or perhaps plan for the next big trip. There are scores of ways to clean waste oil. Some of them best left for the“Ten Easy Ways to Kill Your Engine” tutorial. Other refining methods would be a feature story on Popular Mechanics and likely land the designer a job at Chevron. Many of us have tried varying methods…bag filters. Bed sheets, canister filters, months of settling, gravity filtration, prayer, waiting, begging etc. After spending $1000s of dollars on faulty pumps, filtering mechanisms and fittings; days of agonizing over why the filters are clogging; and hours of our weekend afternoons watching clean oil come out only as a trickle, we come to realize there must be a better way. The Raw Power Centrifuge eliminates the need for filtering. Settling, pumping, pressure and headaches. We’ve developed that special, reliable and trusty tool that once you have it in your hand, you can’t live without. The Raw Power Centrifuge is an Oil Cleaning Machine Engineered for Waste Oil- High Quality Aluminum Castings- Custom Baldor Motor Clean a Variety of Fluids- You'll gain the ability to produce fuel quality oil from a variety of waste oils including motor oil. Vegetable oil, ATF and hydraulic oil. Extract Dirt and Water- Remove particles
$
645
Buy It Now
$0 Shipping
Condition: New
Location: Watertown,SD,USA
$
172.99
Buy It Now
$14.99 Shipping
Condition: New
Location: Cordova,IL,USA
This 1gpm centrifuge kit contains all the parts you need to get the system up and running. All you need to add is a 55 gallon drum and some labor. Included ... morewith the kit are assembly instructions. Basic processing and troubleshooting information. This kit is perfect for our"do-it-yourself" customers. Not only will it save you money based on using your own drum. It will also save you money on the cost of shipping a drum. Optional drum heaters available at our Ebay Store or provide your own. Return policy: 14 days from date on the Invoice Return shipping paid by Buyer Must be in new condition. No used items will be accepted 20% Restocking fee Refunds will be made back to your PayPal Account or Credit Card Product will ship via Fed-Ex and please allow 3 days for item to ship. Shipping charges are for the Continental US only, please contact us for specific shipping cost for other locations. If you have any further questions. Please call 309-654-2875 and we will be happy to assist you! Thank you for visiting our store!
$
118.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Rowland Heights,CA,USA
$
9,790
Buy It Now
$495 Shipping
Condition: New
Location: Mosinee,WI,USA
You are looking at our model BD65 Commercial Biodiesel Processor; capable of producing 450 gallons of ASTM Spec Biodiesel Fuel every 8 hours. What is ... morea realistic SAVINGS BENEFIT of producing your own fuel? Follow the link below for a breakdown; http:www.youtube.com/watch?v=-4MU-fHIPCs&feature=youtu.be At a height of 80 inches and a foot print of 49 inches by 49 inches. The BD65 is extremely efficient and portable. The batch size is 65 gallons. And it will take a little over an hour for the first batch. While the first batch is processing. You can be de/watering and pre-heating your second batch, and stay with me here. While the second batch is processing. Your are pulling glycerol from batch number one and sending it through the Freedom Clean Dry Wash Tower and into storage or your diesel vehicle, all while batch number 3 is de/watering and pre-heating. All this is accomplished with minimal hands on time. You wll need to spend about 15 minutes of time per batch. Then set your timer and go about your day. Your new BD65 will be built with our NEW Control panel. It will feature a 6 hour master timer switch as well as a timer for Processing and Methanol Flash for the highest possible fuel quality. Your BD65 will be shipped with everything you need to get started. You just need to supply the waste veggie oil and Methanol. Here is a list of everything included; BD65 Commercial Biodiesel Processor/Biodiesel Kit(450 Gallons Per Day) Features of the BD65 include: 80 Gallon Preheat Tank with 4500 Watt Stainless Steel Element. Galvanized Removable Dust Covers for Both the Preheat Tank and the Settlement Tank. 130 Gallon Settlement Tank with 5500 Watt Stainless Steel Element for Methanol Flash. Fuse Protected Circuitry with UL Approved Control Panel. Timer Controlled Processor. 0ne ¾ HP Pump and one 1/2 HP pump. 75 Gallon Spill Containment Pallet. 10 KG Freedom Clean Dry Wash Tower. Each Processor Is Shipped Fully Assembled. Tested, and Ready to Run Each Processor is Shipped with the following items: 10KG Freedom Cl
$
4,996
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
US FilterMaxx Programable 10.000G Centrifuge With 3kW heater set 2 Horsepower-Variable Speed 8300+ RPM The Highest Capacity- Most Powerful Centrifuge ... moreunder $6000 Videos: http:bestcentrifuge.com/videos Made in USA At US Filtermaxx we build the Best Centriuges available The Ultimate Centrifuge 10.000G with 3kW heater set. Programmable controller! Compare our specs to centrifuges costing over 3 times as much! See the US Filtermaxx youtube channel for more videos. Industrial quality. Not a cheap imported centrifuge. Large feed plate is standard equipment and does not cost extra. Feed plate distributes oil evenly around circumfrence. Does not channel oil to a few small spots or use a wobbly cone. Stainless Steel Spindle. Collet and Internal Hardware This is a ONE PASS machine that may be pressure or gravity fed. The Machine: The clean oil and dirty oil are separated by an internal dam and both drain continuously. Input: 1/4 NPT Output: 1-1/4NPT upon Operating load is taken by a 1" diameter spindle with replaceable bearings. Not the electric motor bearings. Motor bearings are not exposed to WVO. The quick release spindle has double seals. Quick release spindle removes in 1 minute or less with no tools. Allowing you to clean inside the machine. See Video 1 2 HP Leeson or Baldor Motor Belt overdrive system drives the 8300 + RPM high-speed rotor Single phase 240V. Or 3 phase 230V 11.25-inch diameter bowl. Body is 1-inch thick aluminum casting. Machine weighs 154 pounds Centrifuge Manual: http:bestcentrifuge.com/centrifuge_manual.pdf Warranty: 1-year top to bottom parts and labor. We warrenty the motor so that you do not have to deal with a 3rd party ie"factory warranty" Freight charges on returned parts are responsibility of the owner. International shipping: we get a 50% to 70% discount on international shipping so please ask for a quote. 904 334-2838 Please ask if you have any questions. l
$
1,627
Buy It Now
Free Shipping
Condition: New
Location: Austell,GA,USA
Let the Machine do the Work Get a tool to save you time. Money and stress Picture this: It’s Saturday morning and after a week of heavy driving to and ... morefrom work and hauling around the kids. You must refuel. With a deep seated satisfaction in knowing that you’re done being mugged by the gas stations. You set out turn some waste oil you’ve collected into fuel. You walk into your garage, flick a switch and open a valve. Your work is done. The machine will take over, turning the garbage into liquid gold. It is time to leave and let the centrifuge do the work, there’s no need to babysit. I three short hours your 50 gallons of fuel will be ready. You now have the freedom to go grab a cup of coffee, tinker with your car/truck or perhaps plan for the next big trip. There are scores of ways to clean waste oil. Some of them best left for the“Ten Easy Ways to Kill Your Engine” tutorial. Other refining methods would be a feature story on Popular Mechanics and likely land the designer a job at Chevron. Many of us have tried varying methods…bag filters. Bed sheets, canister filters, months of settling, gravity filtration, prayer, waiting, begging etc. After spending $1000s of dollars on faulty pumps, filtering mechanisms and fittings; days of agonizing over why the filters are clogging; and hours of our weekend afternoons watching clean oil come out only as a trickle, we come to realize there must be a better way. The Raw Power Centrifuge eliminates the need for filtering. Settling, pumping, pressure and headaches. We’ve developed that special, reliable and trusty tool that once you have it in your hand, you can’t live without. The Raw Power Centrifuge is an Oil Cleaning Machine Engineered for Waste Oil- High Quality Aluminum Castings- Custom Baldor Motor Clean a Variety of Fluids- You'll gain the ability to produce fuel quality oil from a variety of waste oils including motor oil. Vegetable oil, ATF and hydraulic oil. Extract Dirt and Water- Remove particles and unwanted fluids with this powerful and effective tool. Pro
$
48.53
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
2,495
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
US FilterMaxx 10.000G Centrifuge 2 Horsepower-1 gallon bowl 8300 RPM The Highest Capacity- Most Powerful Centrifuge under $6000 Force Ventilated Does ... moreNot Collect Water Vapor in Clean Oil Tank Videos: Made in USA* The US Filter Maxx is a heavy duty centrifuge that is easy to use and really gets the job done. Removes all impurities except collodial carbon. This centrifuge will get more goop out of your WVO in 10 minutes than your spinner centrifuge will in 24 hours. 30% of our customers upgrade to FilterMaxx after using other centrifuges. Compare our specs to centrifuges costing over 3 times as much! Industrial quality. Not a cheap imported centrifuge. Large feed plate is standard equipment and does not cost extra. Feed plate distributes oil evenly around circumfrence. Does not channel oil to a few small spots or use a wobbly cone. Stainless Steel Spindle. Collet and Internal Hardware Flow Rate: This is a ONE PASS machine that may be pressure or gravity fed. Optional Equipment: photos 7.8,9) Heater, Economy Controller, Deluxe Controller and Electric Ball Valve The Machine: The clean oil and dirty oil are separated by an internal dam and both drain continuously. Input: 1/4 NPT Output: 3/4 NPT or 1-1/4NPT upon request Operating load is taken by a 1" diameter spindle with replaceable bearings. Not the electric motor bearings. Motor bearings are not exposed to WVO. The quick release spindle has double seals. Quick release spindle removes in 1 minute or less with no tools. Allowing you to clean inside the machine. See Video 1 Belt overdrive system drives the 8300 RPM high-speed rotor Single phase 240V. Or 3 phase 230V 11.25-inch diameter bowl. Bowl holds nearly a gallon. Body is 1-inch thick aluminum casting. Machine weighs 126 pounds Machine is assembled and tested. NOT A KIT. Centrifuge Manual: http:bestcentrifuge.com/centrifuge_manual.pdf Warranty: 1-year top to bottom parts and labor. We warrenty the motor so that you do not have to deal with a 3rd party ie"factory warranty" Freight charges on returne
$
79.99
3d 10h 25m 55s
0 bids
$15 Shipping
Condition: New
Location: Monroe Township,NJ,USA
$
195.98
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Rowland Heights,CA,USA
Econo Super Store 110v AC 16GPM Oil Transfer Pump Kit Fuel Diesel Biodiesel w/Digital Nozzle. Hose This pump kit is designed for light oil pumping applications ... moresuch as diesel fuel. Biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transferring fluids, filtering fluids& more. Is not for Gasoline fuel. The primary function of this pump is for fueling vehicles with an automatic nozzle(nozzle Not included) The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped(usually by a nozzle) The pump should not be left on for a long period of time when restricted. As it will wear down the vanes, but it is ok for normal usage. Included with this kit are 1 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread. Most NPT fittings can be made to fit when using yellow teflon tape. 11ft Hose(black) Digital Nozzle( can be read Gallon or Liter) Suction Hose(clear) w/clamp 16GPM Pump 110v PUMP: Construction: Cast Iron, Induction Motor with aluminum casing, In Built Filter Easily accessible for cleaning, With self priming pump and bypass valve. Motor: 110V AC 370Watts 60hz Self Priming Flow Rate: 20-60L/Min(5.25-15.75 GPM) Max Pressure: 44PSI(3Bar) Suction Height: 5m(16ft) max Lift: 10m 32ft Continous Duty Cycle, 5" x 9-3/8" x 6-1/4" H Domestic Estimated delivery time: 5-8 days to your door FREE Shipping to low 48 States(Seller will decide shipping carrier) Excluded AK. HI, PR, APO, GUAM, VI, or PO Box, Shipping quote: For shipping rates. Please see the table above. The flat rates quoted in the table will apply for most destinations in the countries/ states listed. Occasionally(usually, but not always in remote/rural areas) some addresses will not qualify for th
$
35.6
Buy It Now
$16.99 Shipping
Condition: New
Location: Cordova,IL,USA
Made to fit on top of an open head metal 55 gallon drum. These strainers are an excellent way to strain contaminants out of your WVO. They are made from ... moreFDA-approved High Molecular Weight High Density Polyethylene with an average wall thickness of 28 mil which will handle up to 180 degrees F. The patented lip design ensure the strainer will stay in place while filtering your WVO thru the mesh. Insert Dimensions are: Inner Diameter 22.375" Outer Diameter 23.50" Height/Depth 6" And best of all the strainers are re-usable. 200 Micron Return policy: 14 days from date on the Invoice Return shipping paid by Buyer Must be in new condition. No used items will be accepted 20% Restocking fee Refunds will be made back to your PayPal Account or Credit Card Product will ship via Fed-Ex and please allow 3 days for item to ship. Shipping charges are for the Continental US only, please contact us for specific shipping cost for other locations. If you have any further question. Please call 309-654-2875 and we will be happy too assist you! Thank you for visiting our store! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13ff038faaa-0xdf-
$
299
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Newtown,CT,USA
$
224.99
Buy It Now
$14 Shipping
Condition: New
Location: Hummelstown,PA,USA
If your thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative fuel, visit our Forum Library. We have ... moregathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.paboidieselsupply.com/forum Click for oil centrifuge videos at Centrifuge For Dummies When you think of alternative fuels biodiesel. Waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using WVO or WMO as fuel. Oil centrifuges clean and dewater your oil to below.5 micron. When building a filtration unit. You will need a gear pump and drum heater. SPECIFICATIONS Centrifuge comes with bracket. Pressure gauge, 1/4" ball valve, 2- 1/4" brass tees, 2- 1/4" brass hose barbs, and 1/4" close nipple. The flow rate capacity of the wvo centrifuge is.93 GPM or 55 gallons per hour. The centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2.000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty FREE SHIPPING IN U.S. INTERNATIONAL SHIPPING Canada and Mexico $41 All other countries $60 We are not responsible for interna
$
9.99
Buy It Now
$3.99 Shipping
Condition: New
Location: Gardner,MA,USA
$
20.7
Buy It Now
$14.99 Shipping
Condition: New
Location: Cordova,IL,USA
Revolutionary way of straining into a pail. The strainers can be re-used. They drop easily on top of container and always stays in place– cannot drop ... moreinside. Strainer lie on top of any open-head pail, allowing valuable material to be poured through easily while removing unwanted particles. Features include: Fits any 5-gallon pail, patented lip design ensures that the strainer always stays in place, durable, nylon mesh available in several mesh sizes. Ideal for removing debris from any liquid product that needs to be particle free. Can handle up to 180°F. Dimensions are: Inner diameter-10.675"Outer diameter-11.75" with a height/depth of 4" Best of all these strainers are re-usable. 400 Micron Return policy: 14 days from date on the Invoice Return shipping paid by Buyer Must be in new condition. No used items will be accepted 20% Restocking fee Refunds will be made back to your PayPal Account or Credit Card Product will ship via Fed-Ex and please allow 3 days for item to ship. Shipping charges are for the Continental US only, please contact us for specific shipping cost for other locations. If you have any further question. Please call 309-654-2875 and we will be happy too assist you! Thank you for visiting our store!
$
52.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
2,495
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
US FilterMaxx 3000G Centrifuge US Filtermaxx builds the Highest Capacity- Most Powerful Centrifuges 1.5 Horsepower Baldor Motor 1800RPM 5000 RPM Bowl ... moreSpeed Generates 3000Gs See us at: http:bestcentrifuge.com/videos See the 10.000G bowl test: Made in USA We don't sell the cheapest. We build the Best! The US Filter Maxx is a heavy duty centrifuge that is easy to use and really gets the job done. Removes all impurities except collodial carbon. This centrifuge will get more dirt out of your oil in 10 minutes than your spinner centrifuge will in 24 hours. 30% of our customers upgrade to FilterMaxx after using other centrifuges. Compare our specs to centrifuges costing over 3x as much! Industrial quality. Not a cheap imported centrifuge. Rigid bowl feed plate distributes oil evenly around circumference at bottom of the bowl for maximum cleaning. Stainless Steel Spindle. Collet and Hardware The clean oil and dirty oil are separated by an internal dam and both drain continuously. Input: 1/4 NPT Output:1-1/4NPT 3000 G's Operating load is taken by a 1" diameter spindle with replaceable bearings. The quick release spindle has double seals. Belt overdrive system drives the 5000 RPM high-speed rotor while the motor runs at 1800 rpm for a quieter. Cooler running, longer lasting centrifuge. 3 phase 230V/460V. Single phase 240 volt motors available. 11.25-inch diameter bowl. Bowl displacement 235 cubic inches. Sludge capacity 165 cubic inches. Body is 1-inch thick aluminum casting. Machine weighs 200 pounds Machine is assembled and tested. NOT A KIT. 904 334-2838 Please call if you have any questions. l
$
9,500
Buy It Now
$800 Shipping
Condition: Seller refurbished
Location: India
$
1,199.95
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
$
869.99
Buy It Now
$45 Shipping
Condition: New
Location: Hummelstown,PA,USA
150 GPH Centrifuge and 1/2hp Motor/Pump If you're thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative ... morefuel, visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.pabiodieselsupply.com/forum Click for oil centrifuge videos Oil centrifuges are used in the alternative fuels market for cleaning wvo. Wmo, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below.5 micron Specifications Waste oil centrifuge comes with 200 PSI liquid filled pressure gauge. 3/8" ball valve, 2- 3/8" brass tees, 2- 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the WVO centrifuge is 2.5 GPM or 150 gallons per hour. The oil cleaning centrifuge measures 6.5" in diameter by 10.5" tall. Rotor is capable of holding 42 oz. of contaminants. One 55 gallon drum of WVO/WMO will take approximately 20 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates(at 85 PSI) a centrifugal force 2.000 times greater than gravity at 6400 RPM. The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. Carbonator Mount Pump. Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM@ Freeflow 4.4, 40 PSI 3.8, 80 PSI 3.2, Max Temp 210 F, With Relief Valve. Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included. 1yr. warranty on motor/pump. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warran
$
184.99
Buy It Now
$14 Shipping
Condition: New
Location: Hummelstown,PA,USA
$
779.99
Buy It Now
$35 Shipping
Condition: New
Location: Hummelstown,PA,USA
120 GPH Centrifuge with Inverted Rotor and 1/2hp Motor/Pump Click for oil centrifuge videos When you think of alternative fuels biodiesel. Waste vegetable ... moreoil, and waste motor oil come to mind. Oil filtering is the most important part of using wvo or wmo as fuel. Specifications Centrifuge comes with 200 PSI liquid filled pressure gauge. 3/8" ball valve, 2- 3/8" brass tees, 2- 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the centrifuge is 2 GPM or 120 gallons per hour. The centrifuge measures 5.4" in diameter by 9.8" tall. Inverted Rotor is capable of holding 20 oz. of contaminants. With the nozzles on the top the centrifuge. Everything is held in the rotor when shutting down. One 55 gallon drum of WVO/WMO will take approximately 30 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates(at 90 PSI) a centrifugal force 2,000 times greater than gravity at 8000 RPM. The centrifuge will clean WVO, used motor oil or biodiesel in the wash process. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. Carbonator Mount Pump. Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM@ Freeflow 4.4, 40 PSI 3.8, 80 PSI 3.2, Max Temp 210 F, With Relief Valve. Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty FREE SHIPPING IN U.S. INTERNATIONAL SHIPPING Canada and Mexico $95 All other countries $135 We are not responsible for i
$
1,099
Buy It Now
$100 Shipping
Condition: New
Location: Watertown,SD,USA
FOR MORE INFORMATION ABOUT OUR PUMPS. SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if ... moreyour not satisfied. Our feedback says it all! This is a brand new(Made in USA) Redline MP4000EX which features a 1 1/2 HP Lincoln continuous duty 110 volt electric motor. This pump is built here in our shop in Watertown. South Dakota and we handle all service and warranty work. It comes with a full 1 year warranty. It can be used to bulk oil. Waste oil, transmission fluid, hydraulic oil, antifreeze, vegetable oil, diesel, and fuel oil. This unit features a"Heavy Duty" permanent magnet electric motor and a 3/4" pipe thread pump(adapted up to 1" female pipe thread) It is a self primeing cast iron pump with steel gears that moves oil at 20 GPM, has a precision machined solid steel drive system, an on/off switch, and a sturdy 11 gauge steel frame. Shipping weight for this unit is 75 pounds. This pump will self prime and uses 1" ID hose. This unit has an adjustable bypass(pressure relief) system. Shipping for this item is $75.00 to the lower 48 states. Canada shipping is $225.00. Thanks, redlinepumps
$
429.99
Buy It Now
$20 Shipping
Condition: New
Location: Hummelstown,PA,USA
If you're thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative fuel, visit our Forum Library. ... moreWe have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.pabiodieselsupply.com/forum Click for oil centrifuge videos at Centrifuge for Dummies. The wvo centrifuge has the ability to clean your oil to below.5 micron while dewatering. Specifications Centrifuge comes with pressure gauge. 3/8" ball valve, 2- 3/8" brass tees, 2- 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the wvo centrifuge is 2 GPM or 120 gallons per hour. The unique design of the nozzles located on the top of the rotor make this centrifuge an excellent choice for water removal- when shut down. It is impossible for any water or contaminants to leak into your clean oil. The centrifuge measures 6" in diameter by 9" tall. Rotor is capable of holding 26 oz. of contaminants. One 55 gallon drum of WVO will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at(85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty FREE SHIPPING IN U.S. INTERNATIONAL SHIPPING Canada and Mexico $41 All other countries $60 We are not responsible for internation
$
256.95
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
US FilterMaxx WCB 50 Gear Pump Built To Transfer Thick. Heavy Oils! Large 1.056 cubic inch displacement Cast Iron Pump Heavy Steel Gears quickly transfers ... moreboth light and heavy oils. May be mounted to electric or gasoline motors with flex coupler. 15.71 gpm@ 3400 rpm 10 gpm@ 2200 rpm 8 gpm@ 1750 rpm 3/4 inch NPT in and out(fits inside 1 inch hose) Quick connect couplers available to attach your hose in seconds! 10.5 pounds net weight FREE SHIPPING in continental US
$
595
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
$
47.85
Buy It Now
$0 Shipping
Condition: New
Location: Cranbury,NJ,USA
$
4,565
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
$
92.9
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
229.99
Buy It Now
$15.99 Shipping
Condition: New
Location: Cordova,IL,USA
$
204.99
Buy It Now
$14 Shipping
Condition: New
Location: Hummelstown,PA,USA
$
28.79
Buy It Now
$14.99 Shipping
Condition: New
Location: Cordova,IL,USA
This anti-gel product was specially formulated for use with reducing the gel point of B100(100% biodiesel) Large. Cogesive, fatty, solid particles that ... morestop fuel flow are not allowed to form, keeping the fuel free-flowing to avoid damage to fuel pumps and enable the cold flow of biodiesel. Using this anti-gel agent eliminates the need to use diesel fuel or kerosene blending in the winter time. This formula is recommended and safe for diesel vehicles and home heating applications. Registered with EPA for on-road use. Reduces Biodiesel gel point by about 30°F Economical and highly concentrated. 1:750 Mixing Ratio Treat your Biodiesel for less than 10 cents per gallon! Available in: Quarts. 5 Gallon Pails, 55 Gallon Drums, 275 Gallon Totes, 330 Gallon Totes for pricing and shipping rates on 55 Gallon Drums and Larger Note: Using more or less than the 1:750 ratio has adverse effects on the gel point. Use exactly 1:750 ratio to achieve best results. This formula will not eliminate the plugging restriction on fuel filters. Only heat can solve this issue. Vehicles with a heated fuel filter or filters on top of the engine generally will not have any problems. This product is hazardous and may only ship by Fedex Ground or an LTL carrier. Fedex Ground shipments may only go to the 48 Lower States and Canada. Payment Terms Payment must be received within 7 days of ebay purchase. Disputes will be filed for non-payers. To pay by check or COD you must purchase directly from our dot com website. Feedback We leave positive feedback periodically to all buyers. Shipping Information What's the Shipping Cost? To find the shipping cost. Please use the shipping calculator found on this page. you will need to contact us for combined shipping quotes. There are usually 3 different shipping methods available. you may select any one of them at checkout. When do you ship? Most orders typically ship same/next business day. Transit time depends on the carrier. What about tracking? Tracking information is automatically sent by the carr
$
1,995
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
US FilterMaxx 2400G Centrifuge 120 volts.75 Horsepower Filters Goop out of oil Force Ventilated-Does Not Collect Water in Clean Oil Tank US Filtermaxx ... morebuilds the Highest Capacity- Most Powerful Centrifuges Videos: http:bestcentrifuge.com/videos YouTube videos: See our book on Oil Processing http:www.ebay.com/itm/170605608707?ssPageName=STRK:MESELX:IT&trksid=p3984.m1555.l2649 Download the Centrifuge Manual: http:bestcentrifuge.com/centrifuge_manual.pdf Made in USA* Nearly all small centrifuges are made in China The US Filter Maxx is a heavy duty centrifuge that is easy to use and really gets the job done. Removes all impurities except collodial carbon. This centrifuge will get more goop out of your WVO in 10 minutes than your spinner centrifuge will in 24 hours. 30% of our customers upgrade to FilterMaxx after using other centrifuges. Compare our specs to centrifuges costing over 3 times as much! Industrial quality. Not a cheap imported centrifuge. Large feed plate is standard equipment and does not cost extra. Feed plate distributes oil evenly around circumfrence. Does not channel oil to a few small spots. Stainless Steel Spindle. Collet and Internal Hardware Optional Equipment: photos 7.8,9) Heater, Economy Controller, Deluxe Controller and Electric Ball Valve The Machine: The clean oil and dirty oil are separated by an internal dam and both drain continuously. Input: 1/4 NPT Output: 3/4 NPT or 1-1/4NPT 3000 G's Operating load is taken by a 1" diameter spindle with replaceable bearings. Not the electric motor bearings. Motor bearings are not exposed to WVO. The quick release spindle has double seals. Quick release spindle removes in 1 minute or less with no tools. Allowing you to clean inside the machine. See Video 1 Belt overdrive system drives the 5000 RPM high-speed rotor while the motor runs at 1800 rpm for a quieter. Cooler running, longer lasting centrifuge. Single phase 120V motor. 11.25-inch diameter bowl. Bowl displaces nearly a gallon. 165 cubic inch sludge capacity Body is 1-inch thick al
$
43.2
Buy It Now
$4 Shipping
Condition: New
Location: China
Silicon Band Drum Heater Length: 200mm Width:300mm Thickness:2mm Maximum service temperature:160℃ work voltage:220VAC Power:300W we have a lot many different ... moresize heater.Please search in our store,it can also be custom made,4-5 days lead time. if you need please email us Shipping information Shipping Method Registered mail Ship to USA 7-15days Ship to the other countries 7-30days We only accept paypal payment
$
389.99
Buy It Now
$15 Shipping
Condition: New
Location: Annville,PA,USA
If your thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative fuel, visit our Forum Library. We have ... moregathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.paboidieselsupply.com/forum Click for oil centrifuge videos at Centrifuge for Dummies. When you think of alternative fuels biodiesel. Waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using wvo or wmo as fuel. WVO and Waste oil as fuel. Specifications Centrifuge comes with bracket. Pressure gauge, 3/8" ball valve, 2- 3/8" brass tees, 2- 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the wvo centrifuge is 1.8 GPM or 108 gallons per hour. The centrifuge measures 5.4" in diameter by 9.8" tall. Rotor is capable of holding 20 oz. of contaminants. One 55 gallon drum of WVO will take approximately 30 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates(at 90 PSI) a centrifugal force 2.000 times greater than gravity at 8000 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty FREE SHIPPING IN U.S. INTERNATIONAL SHIPPING Canada and Mexico $41 All other countries $60 We are not responsible for international custom or VAT charges. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e44f
$
52.9
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
1,491.55
Buy It Now
$59.99 Shipping
Condition: New
Location: Cordova,IL,USA
The Raw Power Centrifuge eliminates the need for filtering. Settling, pumping, pressure and headaches. We’ve developed that special, reliable and trusty ... moretool that once you have it in your hand, you can’t live without. In three short hours 35 gallons of wvo is ready to be used as fuel. This centrifuge has the ability to produce fuel quality oil from a variety of waste oils including waste motor oil. Wmo, waste vegetable oil, wvo, ATF, hydraulic oil and basically any kinds of waste oils. This centrifuge spins at 3450rpms and produces 1200 units of G-force. The dirt and water get trapped in the centrifuge bowl. While the clean oil sprays out over the top, collecting on the sides of the housing, then flowing out the drain tube. The centrifuge bowl is 8” outer diameter and will hold 22ozs of contaminants. The bowl will need to be cleaned approximately every 300 gallons. This centrifuge works by applying g-force to a liquid. Causing a settling of the denser particles and fluids to occur. Water and dirt are heavier than oil, so the centrifugal forces pull the unwanted particles and liquids out of the oil. This allows you to safely burn the oil in a diesel vehicle or convert into biodiesel. The Baldor 1/3hp/150watt motor is custom made in the USA and features special upgrades for use with waste oils. Sealed bearings and a special channel have been added to protect the motor. The unique lid design aids in the removal of water. Water is a primary target when cleaning oil. This unique design allows you to vent off water that turns to steam when heated or that happens to make it out of our bowl in the mist spray. This centrifuge is gravity fed and designed to be a single pass system. No messy filters to buy. Change or monitor. It is recommended to heat the oil to at least 150F for better separation which will allow a flow rate of 15gph. Ideal temperature range is 150-200 degrees F. Non-heated oil can be used. But not nearly as effective. This will lower the flow rate to 5gph or lower depending on the temperature and the qua
$
459.99
Buy It Now
$20 Shipping
Condition: New
Location: Hummelstown,PA,USA
If you're thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative fuel, visit our Forum Library. ... moreWe have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.pabiodieselsupply.com/forum Click for oil centrifuge videos at Centrifuge for Dummies. For alternative fuels. Waste vegetable oil(wvo) waste motor oil(wmo) and biodiesel seem to be the three most popular types. Specifications Centrifuge comes with bracket. Pressure gauge, 3/8" ball valve, 2- 3/8" brass tees, 2- 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the wvo centrifuge is 2 GPM or 120 gallons per hour. The unique design of the nozzles located on the top of the rotor make this centrifuge an excellent choice for water removal- when shut down. It is impossible for any water or contaminants to leak into your clean oil. The centrifuge measures 6" in diameter by 9" tall. Rotor is capable of holding 26 oz. of contaminants. One 55 gallon drum of WVO will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at(85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty FREE SHIPPING IN U.S. INTERNATIONAL SHIPPING Canada and Mexico $41 All other countrie
$
86.99
Buy It Now
$0 Shipping
Condition: New
Location: Pasadena,TX,USA
$
4,995
Buy It Now
$249 Shipping
Condition: New
Location: Paynesville,MN,USA
Screw Press Specifications WE HAVE MANY MORE SIZES IN STOCK! Farmers. Truck drivers and even everyday commuters are discovering the advantages of Biodiesel. ... moreDramatic Cost Savings. Biodiesel produced by an individual costs substantially less than petrol diesel fuel often as little as $0.80 per gallon! Whats more. An individual who invests in the necessary equipment to produce their own Biodiesel, can see a return on investment in as little as three months. Smoother Running Engine. Biodiesel has a much higher lubricity(i.e. Lubricating quality) than diesel fuel. That means a smoother running engine, cleaner fuel injection components and a longer engine life. And with a cetane rating that is substantially higher than petrol diesel, Biodiesel leaves minimal carbon deposits in your engine. Green Fuel. Unlike fuel made from a finite resource such as crude oil. Biodiesel is made from renewable organic resources that can be re-grown, reproduced and reused. As such, it also reduces our dependency on crude oil. Easy To Produce. With the proper equipment. Producing Biodiesel fuel is easy-easier by far than watching the sharp increase in costs at the pump every time you need to fill your tank. Weight 1360 lbs. Comes with owners manual Comes with complete instructions. English- to operate. Eliminates or drastically reduces your cost for fuel Creates a byproduct of high protein livestock feed Environmentally friendly No longer supporting foreign oil Utilizes rotation crops Efficiently expels 90-95% of the percentage of oil within the seed(soybean contains 10-15% oil. Of that percentage 90 to 95% is expelled) With bio diesel is usually recieve much better fuel ecomony and more HP You can use any power source to drive this press. A 15-20HP diesel engine with speed governor would be the most suitable for this heavy duty unit(we have a 15HP 995.00 and 22 hp diesel 1195.00 engine in stock) You may also use an electric motor 8-10 hp. CAPACITY:6ton/24h You are responsible for the safety of your body. Pets, kids and
$
199.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Rowland Heights,CA,USA
Econo Super Store Self Prime 110v AC 16GPM Oil Transfer Pump Fuel Diesel Kerosene Biodiesel 60 These pumps are designed for light oil pumping applications ... moresuch as diesel fuel. Biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids& more. Is not for Gasoline fuel. The primary function of this pump is for fueling vehicles with an automatic nozzle(nozzle Not included) The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped(usually by a nozzel) The pump should not be left on for a long period of time when restricted. As it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread. Most NPT fittings can be made to fit when using yellow teflon tape. Contruction: Cast Iron, Induction Motor with aluminum casing, In Built Fitler Easily accessible for cleaning, With self priming pump and bypass valve. Motor: 110V AC 370Watts 60hz Self Priming Flow Rate: 20-60L/Min(5.25-15.75 GPM) Max Pressure: 44PSI(3Bar) Suction Height: 5m(16ft) max Lift: 10m 32ft Continous Duty Cycle, 5" x 9-3/8" x 6-1/4" H Domestic Estimated delivery time: 5-8 days to your door FREE Shipping to low 48 States(Seller will decide shipping carrier) Excluded AK. HI, PR, APO, GUAM, VI, or PO Box, Shipping quote: For shipping rates. Please see the table above. The flat rates quoted in the table will apply for most destinations in the countries/ states listed. Occasionally(usually, but not always in remote/rural areas) some addresses will not qualify for the service or rates that are quoted. In this case, we reserve the right to cancel the transaction, and we will not be obl
$
55.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
This Item is Brand New! This pump is only for transfer Diesel Fuel. Not for water. Gasonline, or Petroleum gas. FEATURES: Flowrate: 11 GMP, Power: 200W, ... moreSuction Distance: 10ft, Head: 20ft, Rotating Speed: 3500RPM max, size 8" x 6-1/2" and Height 4-1/2" without handle Hoses are not included. fitting is about 7/8" to 1" 5ft power cord Shipping Policies Domestic Estimated delivery time: 5-8 days to your door. We do not guarantee transist time. FREE Shipping to Lower Continental 48 States. Seller will decide shipping carrier) Excluded AK. HI, PR, APO, GUAM, VI, or PO Box. Shipping quote: For shipping rates. Please see the table above. The flat rates quoted in the table will apply for most destinations in the countries/ states listed. Occasionally(usually, but not always in remote/rural areas) some addresses will not qualify for the service or rates that are quoted. In this case, we reserve the right to cancel the transaction, and we will not be obligated to honor the quoted shipping price. Alternately, the Purchaser is always welcome to pay the additional shipping expenses to their location. Canada shipping is Available by UPS Standard Ground services. Canadian buyers are responsible for Duty Tax. Not all Providence are cover by our shipping. Please contact us before making purchase. International Buyers: Import duties. Taxes, charges and brokerage fees(typically collected upon delivery or pickup) are the buyer's responsibility and are not included in the item's price or shipping charges. Please check with your country's customs office prior to bidding/buying to determine what the costs will be, and to ensure the item you are purchasing is legal in your country. We only ship to the address that is giving on your PayPal payment. We do not accept email or phone call to made changes to the shipping address. Due to fraud and other reasons. We reserve the right to limit sales to certain countries, and the right to block/ cancel bids for any reason, such as where seller protection is no
$
499.99
Buy It Now
$0 Shipping
Condition: Used
Location: Boise,ID,USA
316 Stainless Steel German Made Heat Exchanger Swagelok BioDiesel SVO These are very nicely made heat exchangers. Made in Germany of solid 316 stainless ... moreincluding the fins. End are gracefully TIG welded and have swagelok hose fittings and also have internal check valves to prevent backflow. These carried dionized water used in a semi-conductor processing machine and are nice and clean. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex Ground to lower 48 USA. AK. HI, PR to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. zm3-r7-s4_gsrx_vers_526(GS 6.6.6(526)
$
55.21
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
799
Buy It Now
$80 Shipping
Condition: New
Location: Watertown,SD,USA
FOR MORE INFORMATION ABOUT OUR PUMPS. GO TO REDLINEPUMPS DOT COM OR CALL 1-605-881-3473. This is our Heavy Duty MP3000RSG 110 Volt Transfer System which ... morefeatures a high quality Baldor Industrial Grade Reduced Speed 1/3 HP 110 volt motor and a 3/4" Port 12 GPM Gear Head. This system comes with a full 1 year warranty! We build this unit here in our shop in Watertown. SD and handle all service or warranty work here. This unit works great for bulk or waste oil. This redlinepump includes a 3/4" port heavy duty cast iron pumping unit with steel gears. A reduced speed motor which increases the pumps power, a soild steel drive shaft. A heavy duty steel frame with carry handle, and a power cord with plug end. This pump has an adjustable pressure relief system which produces up to 100 PSI. It can be used for a centrifuge. The pressure adjust bolt is on the back of the pump. Turning it in increases the pressure and turning it out reduces the pressure. You can also mount a filtration system on the pressure side of the pump. Output rates vary with the type of oil and it's temperature. Diesel pumps at 12 GPM. WVO at room temperature will pump at 12 GPM. 15w40 diesel engine oil will pump at up to 10 GPM when it is above 50 degrees in temperature. These pumps are better than other pumps because they have the power to self prime. It is better to have shorter suction hoses when possible because longer suction hoses will slow your flow rate. Another huge plus this pump offers is NO DUTY CYCLE! You can use it as long as you like without having to shut it off to cool. Other pumps you may see have duty cycles of 20 minutes or less. If you run them past their duty cycle their cheap little motors melt. Many of them were never intended to pump any type of oil. Just water or diesel. Thin. Easy to pump liquids- not thick oil. Again, redlinepumps are purpose built to move waste oil. They have a cast iron positive displacement gear pump instead of a cheap rubber flexible impeller or light duty composite or plastic blades that r
$
1,049.99
Buy It Now
$65 Shipping
Condition: New
Location: Hummelstown,PA,USA
300 GPH Centrifuge and 1/2hp Motor/Pump If you're thinking of driving on Waste Vegetable Oil. Waste Motor Oil, Transmission Fluid or any other alternative ... morefuel, visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles. www.pabiodieselsupply.com/forum Click for oil centrifuge videos Oil centrifuges are used in the alternative fuels market for cleaning wvo. Wmo, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below.5 micron Specifications The flow rate capacity of the oil centrifuge is 5 GPM or 300 gallons per hour. The oil cleaning centrifuge measures13.5" in diameter by 18.5" tall. Rotor is capable of holding 202 oz. of contaminants. Waste oil centrifuge generates a centrifugal force 2.000 times greater than gravity at 4500 RPM. The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. Close Coupled Pump. Rotary Gear, 1 HP, Voltage 115/230, ODP Motor Enclosure,Close Coupled Motor Frame, 1725 Max RPM, 12 GPM Max, Max Operating PSI 100, Port Size 3/4 In, 400 Max SSU, Max Temp 210 F, With Relief Valve. Pump Body Material Brass, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included.1yr. warranty on motor/pump. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty Call for INTERNATIONAL SHIPPING We are not responsible for international custom or VAT charges. For all your oil filtration needs visit us at Pa Biodiesel Supply
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
For sale is a fully functioning stainless steel Bio-diesel system. Complete with a fiber glass tub to catch any spillage, fully operational control panel, air pump, circulating pumps, center fuse, 55 gallon cart, electric driven mixing paddles, and heating elements. This system was built based off a set of plans created by a collaborative of university professors on the east coast. This bio-diesel system created large batches[ about 55 gallons] of fuel in each batch. The fuel created was able to feed small cars. Large diesel motors, and heating systems. We areselling this unit because our source of vegetable oil is no longer available. If you have any questions please contact Larry Comes at 443-807-1661(please call between 9 a.m. 6p.m. EST Monday- Saturday) Pick-up only. We have equipment available to aid in the loading process.
You are bidding on a used Fuelmeister 40gal processor with extra 50gal water wash tank witch doubles your production. This processor is in excellent shape.
For sale a complete fuelmeister II bio diesel processor. Comes with all necessary information and in excellent condition. I have lye and methanol but shipping it might be a challenge. All is included in the price. I AM UNSURE OF THE SHIPPING I WILL CHARGE EXACT FREIGHT WILL NOT KNOW UNTIL FINAL SALE.I HAD TO PICK A VALUE.THANKS. If you have true interest contact me and make an offer.thank you.
Like new ARO double diaphragm pump. Pump was taken apart and cleaned. check valve balls and seats look good as does the diaphragms. Rubber o rings were replaced with viton o rings for better chemical and biodiesel resistance. pump puts out 70 psi and 6 1/2 gallons per min. at 100 psi air pressure. no international shipping ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13df93a092b-0xf4-
Quantity of 3- 500 gallon propane tanks and one 250 gallon propane tank. Bought for use in building a Murphy's machines biodiesel plant. I have the complete kit for building the 500 gallon biodiesel plant that can be purchased with the complete set of plans at a great discount if you buy the propane tanks. I also have all the steel cut for the legs to stand the tanks up for the batch plant. Call with questions 585 739 9593 Posted with
All American biodiesel processor used. Metal piping enclosed system. You can see the manufacturer we purchased it from at all american bio. com. Works great. We have the direction booklet to go with it. No longer making fuel because we now have a attached garage. pick up or shipping paid by buyer. Contact me and we can figure out shipping. I can deliver it to a trucking terminal in Milwaukee WI to save on shipping. call to arrange a shipping quote 414 530 2405
I have some used 55 gallon plastic drums that were used to store vegetable oil. All are leak free and fluid tight. I do have a steel barrel that can be used to make a smoker out of. This is a pick up item only. I can deliver for $1.15 per mile.
This is a 15 gallon per minute biodiesel cavitation reactor manufactured by FM Mathis and Sons in 2011. The unit is powered by 480VAC. And requires a feedstock stream of vegetable oil, methanol, and liquid catalyst at a measured dosage rate. Alternatively you can mix all the chemicals in one tank and let the reactor pull from that tank to another tank, reacting it into biodiesel as it goes. Input stream should be at least 140F for a thorough reaction, but lower temperatures have been successful as well. This unit has less than 100 hours on it. And was working without problems when pulled from service. Owner upgraded to higher throughput system soon after purchasing. This unit makes biodiesel very well and technical support is available from the manufacturer. Unit weighs approximately 800 lbs and may be shipped via LTL freight. Or is available ... morefor local pickup in ZIP code 27893. This unit is guaranteed not DOA but otherwise comes with no warranty or guarantees.
Shurflo 230VAC Industrial Fluid Pump. Biodeisel SVO. Shurflo 230VAC Industrial Fluid Pump. Biodeisel SVO, alternate fuel transfer pump. This a 230 Volt industrial unit. I do not know the particular history of these pumps I have. They came in some used machine parts, so with that I would not use them for any potable water anyone be drinking. This pump has a pressure switch on it. This pump is rated at 4.5 GPM at 50PSI. Please see my other items for a sure flow pressure accumulator. Thank you for taking the time to look at my items. If you have any questions. Please email me and I will do my best to answer them. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Biodiesel Reactor processor wvo svo waste oil
HAIGHT BAKER 15U PUMP 15GPM& 3 SCHROEDER FILTERS BIODIESEL FILTER SYSTEM This came from a biodiesel plant that closed. This auction is for a HAIGHT BAKER 15U PUMP 15GPM& 3 SCHROEDER FILTERS BIODIESEL FILTER SYSTEM. These pumps and filters where in operation until the plant closed. They are in good shape and look to be ready for work. If you have any questions at all feel free to ask. Haight 15U pump 15GPM. 1 HP motor. 208-230/460 3 phase. Schroeder Industries. Model# 001273987000. Max PSI 800 Bypass 40 Series D. Below was copied off the web: 15U Square Flange Pump. Specifications. Capacity range is: Not Available Construction Material: Ductile Iron Capacity(max) 15 gpm Discharge Pressure(max) 600 psi Temperature: 625 degrees F 15U- Series DIU Square Flange Internal Gear Pump Square Flange Pump Sizes 10. 15, 20, 24, 30, 40 gpm Haight ... moreoffers six sizes of pumps in the square flange DIU-Series. All sizes are available with a bolt-on Relief Valve which can function in either a return to suction. Or return to tank mode. All DIU-Series pumps are interchangeable with earlier D& DR Series pumps. Compact. Rugged, and easy to maintain, these positive displacement pumps are ideally suited to close-coupled mounting to the motor or footed mounting. Haight Pumps bolt-on footed brackets match standard NEMA motor height eliminating pump or motor shimming. Each bracket size is designed to align the pump and motor shaft heights without shim blocks. Product Documents. TERMS: Items are sold AS-IS and what you see is what you get Please check the pictures to verify anything stated in the ad. Payment is expected within 48 Hours of sale unless something else is arranged. We ship Fedex USPS or UPS domestically. Bax Global or USPS internationally. Buyer Pays actual shipping plus a $15 Handling and Packaging fee. Please ask questions before the end of the auction. ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ClicPic
My broken dream can be your new adventure. Complete unit. Go from seed to fuel. 6 ton expeller with about 10 hours on it powered by a15 HP electronic motor( have a diesel motor for extra price not included in the sale)40 gallon prosser, filters, buckets,tote scale to measure chemical. everything you need and more My buy it now price is the least I will let it go for Posted with
I purchased this mixing pump and Static mixer with the plans of setting up a large scale biodiesel plant but never found the time. I will be listing more pumps speed controllers and motors if you want to check out my other items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e17ea9148-0xfa-
Normal 0 false false false EN-US JA X-NONE This is the real deal. A genuine, professional centrifuge for a fraction of the original cost. This centrifuge is in GREAT CONDITION. Only a few minor paint chips. Look at the photos. Similar units listed elsewhere have sold for much higher prices and they were in much poorer condition. What is especially rare is that this is a 110-volt unit that you could use in your garage at home. The motor powers up and spins smoothly. It needs a new drive belt for the pulley(available from manufacturer) These units sell for nearly $40.000 new. This is a impeccably German-engineered and German-crafted tubular“super” centrifuge similar to Sharples. This continuous-flow machine is literally more than 100 times the centrifuge of those wimpy 3000-G biodiesel& WVO centrifuges that look like they were built in ... moresomeone’s garage. This unit generates up to 40.000 G forces. This unit will clean your biodiesel or waste vegetable oil WVO or even used motor oil FAST. This laboratory centrifuge is for continuous separation of two liquids. Clarifying of liquidsfrom solids, emulsifying of several liquids, fraction of plasma protein, concentration and extraction of biological specimens as well as further fields of application. It includes a clarifier bowl. Separator bowls can be purchased from the manufacturer. It is bolted to a two-inch thick solid steel plate, making it very stable(and very heavy) I can ship with or without the steel plate(your preference) Will quote crating and shipping(freight) for serious bidders. Local pickup welcome. Preapproval required to bid. Call me with any questions 9zero 73 two 129 zero nine. Benefits(from Manufacturer website: cepa-zentrifugenDOTcom) Quick separation 40.000 G forces 110 Volt power Continual capacity Integrated heating/cooling tubes Easy installation and handling Production centrifuge Favorable maintenance Small footprint saves valuable room Shipping and Handling: The unit is easily crated and shippable. Exact shipping. Handling costs, and
used. Relativly clean GAF bag filter with basket, the unit rated 6 bar pressure(87psi) max, 150deg c max temp and flow of 25 liter max, has 2" pipe thread ports side and bottom. the vessal w/legs and handle is about 35" tall and 8" od the vessel without legs is 18" or so. this is non magnetic stainless the actual old bag I removed is about 15" high and over 7" in dia unit has some residue and could use a cleaning here is the only data I found on GAF filters. Shipping weight 48 lbs TERMS: items are sold AS-IS/ as described. Some items offered with return privilege. Some are sold without please read return policy for specific item/s. Please ask any questions about payment, item condition or any other concerns before bidding, We try and ship promptly within 2-3 days of receiving payment. Tracking number provided ... moreupon shipment of goods. We may ship small items via post office at our discretion. We do not ship freight collect on UPS accounts. We do not ship any other method i.e. FedEx etc. No international bidders at this time. PAYMENT: we accept paypal and other forms of payment please inquire. We try and answer all requests and questions in 24hours but do service and travel so we are not always available to get back to you in a few hors depending on schedule. Thanks for looking.
This is an awesome storage and filling station! It could be in your own garage! Great for WVO SVO biodiesel what ever you fill your vehicle with. The storage(2) units are 275 gallons and are piped together and connected to fill your own vehicle. WE did use waste vegetable oil for our diesel vehicles. We are no longer able to do this due to health and work reasons. We are sell ing the cleaning system and the storage system. Look for the cleaning centerfuge in a few days to be listed. The pipes. Hoses and connections are all included in this sale. The quick connections make the job of filling your fuel tank alot easier and cleaner. The system has been cleaned and is ready to be disassembled. Local pick-up only. We are located in Berwick, PA. Email me with your questions or about pick-up. PLEASE READ THE FOLLOWING! COMES FROM A NONSMOKING HOME! ... more● As per Ebay rules. I accept only PayPal. ● ● If you are paying with an E-Check through PayPal. Please know that your item will NOT ship until the payment has cleared. ● ● Payment is expected within 3 days after the auction has ended. ALL NON-Paying Bidders will be reported to Ebay. ● ● Shipping to Hawaii and Alaska please add 2 dollars for S&H ● ● Worldwide shipping is NO LONGER available. ● ● I ship ONLY to your confirmed PayPal address. Items will no longer be sent to an address other than the one that is registered with PayPal. ● ● Shipping and handling includes delivery confirmation for ALL U.S. addresses. ● ● Please remember there is more to shipping than just the actual postage. Handling involves bubble mailers. Bubble wrap, packaging tape, printer ink, printer paper and gas money to the post office. ● ● This item will ship via the US Post Office. ● ● If you have any questions. Please email me. ● Happy Bidding!
removed from service this is a large stainless filter housing only seems to have been used for filtering water. Will need to be cleaned has 1" inlet/ outlet ports and 3/4" drain and 1/4" gauge port on top. the filters are 30" long so I would think you could stack 10" ones but not sure. would think this would be a great unit for alternative fuels biodiesel? but I am not sure this was band clamped to a cart so I dont have any mounting bracket here is the data sheet shipping weight 30 lbs TERMS: items are sold AS-IS/ as described. Some items offered with return privilege. Some are sold without please read return policy for specific item/s. Please ask any questions about payment, item condition or any other concerns before bidding, We try and ship promptly within 2-3 days of receiving payment. Tracking number provided ... moreupon shipment of goods. We may ship small items via post office at our discretion. We do not ship freight collect on UPS accounts. We do not ship any other method i.e. FedEx etc. No international bidders at this time. PAYMENT: we accept paypal and other forms of payment please inquire. We try and answer all requests and questions in 24hours but do service and travel so we are not always available to get back to you in a few hors depending on schedule. Thanks for looking.
I used this filter only two times to filter some waste oil I had. It's practically brand new-in excellent condition. It's a 10" bag filter housing. 100 PSI max. pressure. Has regulator. Can be used to filter biodiesel or water or waste oil. Get a great deal on this one!
Listing is for a 2600 gallon cone bottom tank on a steel frame. This was used in a WVO environment and still contains traces of oils. It is wrapped in 3" poly-foam insulation. It has a 3" drain and top fill port. Included inside is 700 ft. of 3" diameter Pex heating coil. Over $3500.00 Invested. Save here! MAKE AN OFFER! THIS ITEM IS LISTED FOR PICKUP. Fulton NY 13069 SHIPPING CAN BE ARRANGED BY 3rd PARTY or BUYER. AT BUYERS EXPENSE. Thank you for viewing the listing Have a great day!
Auction is for one used Tuthill(Fill-Rite) FR1618 transfer pump. Pumps ~18 gals minute. 115 VAC. Rotary vane type. Pump is in good working condition. Ports are 1" FNPT. Switch for turning on or off. Shipping to USA only. Shipping $15.00 USPS parcel post. No reserve. Item is as is. As seen in pictures.
Auction is for one used Tuthill/ Fillrite FR1612 pump. Pump operates from 12VDC. Pump is in good working condition. No reserve. Item is as is. As seen in picture. Shipping to USA only($14.00) 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e910451d0-0xf9-
2008 Model. In good working order. Currently in use. Complete with all accessories.and instructions. We also have numerous 250 gallon totes to sell for $50 each.
This is an excellent working centerfuge. Named Absolute Centerfuge, made in the USA! We bought this to clean our waste veggie oil to run in our diesel vehicles. We used the hanging bags for filtration before the purchase of this equipment. This centerfuge is the answer to the cleanest oil possible. Must be heated before you run in the centerfuge. We no longer use waste veggie oil due to health issues. This centerfuge has been cleaned and is in excellent working condition, there might still be some waste oil on the outside of the unit. The oil must be preheated before it goes into the centerfuge, and the unit is a non automated feed in it, my husband wanted to control the amount and speed of the oil in the centerfuge, so the dirt would settle to the bottom and not clog the basket. If you have any questions please just e-mail me!We purchased ... morethe unit for over $1200.00. I will be listing a filling unit that was used with this unit. PLEASE READ THE FOLLOWING! COMES FROM A NONSMOKING HOME! ● As per Ebay rules. I accept only PayPal. ● ● If you are paying with an E-Check through PayPal. Please know that your item will NOT ship until the payment has cleared. ● ● Payment is expected within 3 days after the auction has ended. ALL NON-Paying Bidders will be reported to Ebay. ● ● Shipping to Hawaii and Alaska please add 2 dollars for S&H ● ● Worldwide shipping is NO LONGER available. ● ● I ship ONLY to your confirmed PayPal address. Items will no longer be sent to an address other than the one that is registered with PayPal. ● ● Shipping and handling includes delivery confirmation for ALL U.S. addresses. ● ● Please remember there is more to shipping than just the actual postage. Handling involves bubble mailers. Bubble wrap, packaging tape, printer ink, printer paper and gas money to the post office. ● ● This item will ship via the US Post Office. ● ● If you have any questions. Please email me. ● Happy Bidding!
Auction is for one used Metpro drum pump with pump tube. In working condition. Universal motor 115 volt. 1000 watt, 50/60hz. Bipolar on/off switch with single pole thermal overcurrent release. Pumps approximately 30 GPM depending on fluid. Item is as is, as seen in picture. Payment due 3 days from end of auction. Shipping to USA only, $29.00 USPS ground. No reserve.
Make 40 gallons per batch from new or used vegetable oil. Save big at the pumps This is a used system in working order. Saves you the time and money tracking down all the needed components. Buying them and figuring out how to assemble. We used it for a couple years making bio for the tractor. Dozer, backhoe and truck. A lot went into the dozer when we were building the pond but also in the pick which really quieted down the clatter of the 7.3. It smells a lot better and we usually ran a 50-50 mixture without any problems. Run it in the pickup, Case 580B backhoe, T-8 Dozer, 25 hp compact tractor and even the diesel generator. Guessing we made 400-500 gallons with the system. Ok so what do you get with this system. Basically everything you need to start making bio diesel as soon as you clean out a spot in the garage for it. The processor is ... morethe most expensive and time consuming part to purchase and put together but it is all assembled and ready to go. You also get a spare processing mixture pump, The timer and outlet set up. One course Golden rod filter, One very fine filter for the finished product which is a Filtroil BU-30 which is over $600 new. One settling tank. 55 gal. for incoming used fryer oil, then goes to the tank below, One 55 gallon heat tank with 220 volt band heater and insulated and drains on the bottom to fill the processor and the other to drain out any water. Plus three more drums with used oil. Various measuring cups, and droppers. One fine mister for the beginning of the washing. One hand pump to get the fuel out of the finished 55 gallon drum. 150 gallon of used fryer oil and the other two ingredients for the process to get a few batches made The only thing you should need is a measuring scale for weighing lye and small red phenol bottle for the titration test. You will also need a trailer to haul all of this. And a way to get full 55 gallon drums of the trailer or truck. Or make a couple trips. The process is simple and only takes a little time each day. I usually make 40 gallons a week an
I have for sale an Extreme Biodiesel mini refinery that cost me well over $20.000; also included are containers both 50 gallon drums and 300 gallon polyethylene containers. Also, a larger fiberglass container that holds 500 gallons. I have many more materials and miscellaneous items that go with the system when sold. All components are in like new used condition and housed in a ventilated building. For more information please call(352) 302-5870. Below is the information from Extremebiodiesel's website: The Mini Refinery is the only waterless system available on the market that can make 600 gallons of quality biodiesel per day. Designed to run continuously. The Mini Refinery will meet all of your biodiesel needs.600 gallons/day system $19,999 The Extreme Biodiesel Mini Refinery is extremely unique in the world of Biodiesel. This waterless ... moresystem is the only system on the market that can make 600 gallons per day utilizing the best technology known in the industry—and at minimal cost. The Mini Refinery is built to be used continuously. Every day, and does not require rest. We construct this refinery using only the finest materials available. The Mini Refinery includes a heating system that is an electric pass-through heater and a 300 gallon tank and filtration system. This way you know before processing that your oil is free of large debris. You can also choose any voltage configuration. We now offer a new optional waste oil heater that runs on vegetable oil. As well as, biodiesel. Not only will this reduce your processing cost, but it will also earn you money. You may qualify for state and federal tax credits for burning waste oil. Check with your local tax authority. The filtration unit on the refinery will run 3000 gallons before requiring a methanol rinse. And will last 12,000 to 14,000 gallons before needing to recharge the system. All of this is wrapped into one tidy package that only takes about 25 feet x 10 feet of space. This is truly an incredible mini refinery and at only $19.999, it is by far the mos
Dieselcraft OC-50 Cleaning Rate: 100 Gallons per Hour Measures 13” wide by 42” tall and 16” deep to stand next to a 55 gallon drum. Shipping weight: 85 pounds Rotor holding capacity: 20 oz of contamination. Pump and Motor Features: 100 PSI maximum continuous pressure. All-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with polyester powder coating. Used this unit for one season processed over 1000 gallons of wast oil for are truck.sold are diesel truck this year. Also can be used for heating fuel. I will also give the buyer a extra rotor new $125 witch holds 20oz of waste. Unit brakes down for easy shipping ... moreGo to the you tube link to see unit in operation http:www.youtube.com/watch?v=ZnEYyAnlck8&sns=em Posted with
for your consideration, a large lot of alum. wilden 3" m15 pump parts. There are 22 outer halves. Mostly alumn. but at least two are steel. About ten center assemblies there are some alum sandpiper parts mixed in( they are interchangeable) Bases inlets + top outlets are included. As are boxes of balls + clamps. New mufflers and gaskets included. some smaller wilden pump parts are included too. pictures tell the rest of the story. But if you have any questions. please ask. selling as is you could rebuild them for personal uses or resell them for profit. this lot fits in to two pallets. One weighing#1375 and the smaller pallet weighs#250. Please contact us for an overview of payment options 508-679-1901 Major Credit cards accepted. Credit Cards preferred. PayPal accepted. Shipping not included. Please contact us for shipping quote. We ... moredeal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING or BUYING. Each item sold AS-IS
for your consideration, a large lot of poly and teflon new M2 parts. It looks like there is enough parts to build a complete pump or repair your own pump. parts included are teflon balls. Gaskets, ball cages, diaphragms,clamps, and more. Please contact me if you have any questions. can be shipped ups ground. Please contact us for an overview of payment options 508-679-1901 Major Credit cards accepted. Credit Cards preferred. PayPal accepted. Shipping not included. Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at ... moreany time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING or BUYING. Each item sold AS-IS
I bought this off eBay from PA Biodiesel Supply a few months ago for 150$. This has been used on my filtering system for wvo that I was running in my car. It works great. Just run the oil from one 55 gallon drum to the other to make it clean and get out water ect in just one hour. I tried my best to clean it but if you have ever dealt with this stuff it is messy and is hard to clean. Specs- The flow rate capacity of the wvo centrifuge is.93 GPM or 55 gallons per hour. The centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with ... morepump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit. Posted with
This is a PA biodiesel kit. It is fully assembled and working. There a fe gallons of WVO/WMO left in the unit. I am getting out of WVO for now. I will also throw in 4 steel Jerry cans and a barrel hand pump that I use to collect WVO. http:pabiodieselsupply.com/shop/wvo-centrifuge-oil-centrifuge-filtration-unit-closed-drum/ Local pickup or will deliver for $.57 a loaded mile up to 200 miles. Delivery could take a week to organize. Posted with
Used but in great condition. Model OC-20 Centrifuge 55 gallons per hour
Snyder 150 Gallon Vertical tank with Removable Lid p/n 997176 Has bottom petcock Valve Drain Storage Tank. Open Top, Vertical, Tank 150 Gal. Dia. 34 In. Height 57 In. Graduations 10 Gal. Construction Material High Density Linear Polyethylene, Max. Temp. 130 F, Agency Compliance NSF and FDA, Features Molded-in Gallon/Liter Indicators, Includes Lid Cover
Wilden M15 Diaphragm Pump Green Top 1(877) 673-4868, Mon-Fri 9-5 PST 18249 Wilden M15 Diaphragm Pump Green Top, Description, Wilden M15 Diaphragm Pump Green Top Wilden's metal pump line lends itself to various processes and waste applications. Wilden also offers a multitude of elastomer options including Teflon PTFE. To meet your abrasion, temperature, and chemical compatibility concerns. Other models are available including ATEX versions. Flow Rate: 878 LPM(232 GPM) Max Pressure: 8.6 BAR(125 PSI) Maximum Suction Lift Capability: 5.5m(18' Dry. 9.5m(31' Wet Maximum Diameter Solids: 10 mm(3/8" Inlet Port: 3" BSP female Discharge Port: 3" BSP female Weight: 53.4 kg Accessories: A range of different fittings are available upon request Condition; USED! Still in useable condition; ATTENTION; These products were used for ... moreBIODIESEL THIS ITEM WILL BE SHIPPED VIA FREIGHT. PLEASE BE AWARE OF SHIPPING COSTS PRIOR TO BIDDING. PLEASE USE FREIGHT CALCULATOR BELOW TO DETERMINE YOUR SHIPPING COSTS Guarantee, Every effort has been made to accurately describe all merchandise offered for auction. We offer a 7day return policy on DOA or miss-shipped merchandise. Please note that we are not an authorized dealer of this product and any warranty included with the product may or may not be honored by the manufacturer. Shipping, THIS ITEM WILL BE SHIPPED VIA FREIGHT. PLEASE BE AWARE OF SHIPPING COSTS PRIOR TO BIDDING. PLEASE USE FREIGHT CALCULATOR BELOW TO DETERMINE YOUR SHIPPING COSTS Contact Us, Give us a call at 1.877.673.4868 or google Coho Liquidation. ALL ITEMS ARE SALVAGE. STORE RETURNS, OVERSTOCK OR SIMILAR SECONDARY MERCHANDISE. PURCHASER ACCEPTS THE PROPERTY IN ITS PRESENT CONDITION WITH NO WARRANTIES OF ANY KIND, EXPRESSED OR IMPLIED, MADE BY SELLER OR ANY EMPLOYEE, AGENT OR REPRESENTATIVE OF SELLER, WITH RESPECT TO SUITABILITY FOR COMMERCIAL PURPOSES, MERCHANTABILITY, AND OR FITNESS FOR A PARTICULAR PURPOSE.
Wilden M15 Diaphragm Pump White Top 1(877) 673-4868, Mon-Fri 9-5 PST 18250 Wilden M15 Diaphragm Pump White Top, Description, THIS ITEM WILL BE SHIPPED VIA FREIGHT. BE AWARE OF SHIPPING COSTS PRIOR TO BIDDING Flow Rate: 878 LPM(232 GPM) Max Pressure: 8.6 BAR(125 PSI) Maximum Suction Lift Capability: 5.5m(18' Dry. 9.5m(31' Wet Maximum Diameter Solids: 10 mm(3/8" Inlet Port: 3" BSP female Discharge Port: 3" BSP female Weight: 53.4 kg Accessories: A range of different fittings are available upon request Condition; USED! Still in useable condition; ATTENTION; These products were used for BIODIESEL THIS ITEM WILL BE SHIPPED VIA FREIGHT. BE AWARE OF SHIPPING COSTS PRIOR TO BIDDING. PLEASE USE FREIGHT BELOW CALCULATOR TO DETERMINE YOUR SHIPPING COSTS. Guarantee, Every effort has been made to accurately describe all merchandise ... moreoffered for auction. We offer a 7day return policy on DOA or miss-shipped merchandise. Please note that we are not an authorized dealer of this product and any warranty included with the product may or may not be honored by the manufacturer. Shipping, THIS ITEM WILL BE SHIPPED VIA FREIGHT. BE AWARE OF SHIPPING COSTS PRIOR TO BIDDING. PLEASE USE FREIGHT BELOW CALCULATOR TO DETERMINE YOUR SHIPPING COSTS. Contact Us, Contact us at 1-888-287-6420, ALL ITEMS ARE SALVAGE. STORE RETURNS, OVERSTOCK OR SIMILAR SECONDARY MERCHANDISE. PURCHASER ACCEPTS THE PROPERTY IN ITS PRESENT CONDITION WITH NO WARRANTIES OF ANY KIND, EXPRESSED OR IMPLIED, MADE BY SELLER OR ANY EMPLOYEE, AGENT OR REPRESENTATIVE OF SELLER, WITH RESPECT TO SUITABILITY FOR COMMERCIAL PURPOSES, MERCHANTABILITY, AND OR FITNESS FOR A PARTICULAR PURPOSE.
500 Gallon HDPE Poly Cone Bottom Tank w/ Steel Stand Biodiesel WVO Used tank in good condition. Some discoloration and staining. Some scratches and scuffs. Mostly outside. Small area that was melted near manway lid opening, but could be cut off. Great tank for biodiesel or WVO. Nice sturdy steel stand included. Stand could use a good cleaning. Tank measures approx. 52" in diameter with an overall height of 80" Approx. 118" overall height with stand. Square base of stand is 43" x 43" Will have to ship freight. Please send zip code for an rough estimate of freight costs. Sold"as is" without warranty expressed or implied. Buyer is responsible for determining the suitability of this product for their application. All items are sold as is FOB Hillsboro. OR. Buyer is responsible for shipping and handling or freight ... morecharges. Small items will be shipped USPS or FedEx Ground unless other arrangements are made.
OPW Dispensing Automatic Fueling Nozzle Works Good. Gas. Diesel, Bio Diesel you name it. it will flow. 3/4" Blue-Fully functional item-Item will show signs of use. Minor wear and tear. Removed from commercial/ retail gas dispenser-Made in USA what you see is what you get. Any questions please ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13f366217c8-0xe3-
J. Little Mercer Co. Inc. for your consideration, a large lot of alum. wilden 3" m15 pump parts. There are 22 outer halves. Mostly alumn. but at least two are steel. About ten center assemblies there are some alum sandpiper parts mixed in( they are interchangeable) Bases inlets + top outlets are included. As are boxes of balls + clamps. New mufflers and gaskets included. some smaller wilden pump parts are included too. pictures tell the rest of the story. But if you have any questions. please ask. selling as is you could rebuild them for personal uses or resell them for profit. this lot fits in to two pallets. One weighing#1375 and the smaller pallet weighs#250. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal ... morewith several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
This 55-gallon(208L) 120V DHCS Series standard heavy duty heater is made for metal drums and pails. The patented 360° grounded multi-stranded heating element is laminated between two extra thick layers of 20mil fiberglass-reinforced silicone rubber for excellent strength and durability. The heating element is uniformily placed to maximize heat distribution and meets NEC 427.23. It is moisture and chemical resistant, with a spring closure that can be expanded 3in(76mm) The adjustable thermostat has a range of 50 to 425°F(10 to 218°C) for metal drums or pails. The maximum exposure temperature on the heating surface is 450°F(232°C) Includes a 6ft(1.8m) long power cord with a standard 3-prong plug(NEMA 5-15) Grounded. Material: 2-Layer Fiberglass Reinforced Silicone Rubber. Voltage: 120VAC. Watts: 1200. Thermostat Temperature: ... more50 To 425°F(10 To 218°C) Maximum Exposure Temperature On Heating Surface: 450°F(232°C) Dielectric Strength: 2000V. Diameter: 22.3in(565mm) Length: 70in(1778mm) Width: 4in(102m) Size: 55-Gallons(208L) BriskHeat# DHCS15. This item is lightly used but still in excellent physical and working condition. So. This not quite what you’re looking for? Be sure to We strive for 5-Star Service. So please contact us regarding any problems BEFORE filing any claims or leaving unfavorable DSR’s or feedback. We will do our best to make you happy. Payment required within 24 hours of auction end. If you need more time to pay. Contact me prior to bidding. Shipping quote is for shipping to the 48 contiguous United States. Shipping to Alaska. Hawaii, and international will cost more. Please contact me for a shipping quote. We insure all packages for purchase price and are not able to claim lesser values on items for shipping purposes. I only ship to Paypal confirmed addresses.
Item Information Item Name: Operational Biodiesel Plant 100.000 gal/month Item# 9705 Price/Each: $390.000.00 Year: 2009 Brand Name: Model: Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Operational BioDiesel Plant Information on the components of the system can be found in the images below: This is an operational BioDiesel plant that has just been idled this summer. All plumbing is hooked up. Boilers are in place and electrical is explosion proof. Plant can be professionally taken apart and loaded on trucks or in containers. This plant ... morecan produce 100.000 gallons in one shift per month. Call for photots or video. Come see the plant. Call for details. Seller does not want to keep it in his building and the plant needs to be removed from the property and set up elseware. The original designer and installer will conduct the removal and new location installation for a fee. Contact Us About This Machine Should you have questions. Please contact Joe Wihbey at(860) 484-4449 or email or use the"Ask a Question/ Make an Offer" form below PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments ma
Antique 1-gal. Gas Can~This is a Very Unique Diesel Gas Can From The 1930s Or 1940s. This Has A Custom Professional Paint Job. Painted Antique Mint Green With A Distressed Finish And A Biodiesel Decal. no flaking paint) Both Caps Can Be Removed Easily(no paint on threads) It's In Solid Condition With Some Minor Dings And The Small Cap Has Some Damage. Please Look At All Pictures And If You Have Any Question's Please Email. Dimensions: W 6 5/8"H 10 1/4" Thank You!
FAT tank by Qual Fat used to heat animal fat and keep it in liquid form. Or can be used in biodiesel manufacturing process. About 6' across x 6' tall. Weight 1200 lbs approx. Sold AS IS No guarantee that pump works. No guarantee that motor works. New parts are available at extra cost. Contact us for prices. FOB- freight quote is available on request. ref wwb1200)
1 used Waste Vegetable Oil Centrifuge. I bought this from PA biodiesel. It is a model PA-55. I used it less than 10 hrs, constructed a WVO filter system but decided not to continue with the project. This unit sells on PA Biodiesels web site for $136.
Used immersion heater. I used this in my oil filtration set up, it easily heated 10 gallons of oil to 400+ degrees in less than 1 hour. No thermostat provided. Used
NO RESERVE! NEW! Stand is made out of a high quality steel. Qty 1- 60 Gal Mix& Fill Stand assembly. Comes un assembled with base bracket, Strand& Galv Strap(1-1/2" x48" P/N 5300815( Qty 6 Avail)
Selling my BioPro 190 Biodiesel Processor. These machines are fully automated and produce quality fuel. I have produced almost 6000 gallons with this processor. So it has paid for itself already. Since owning the machine. I have replaced both heaters, the methoxide pump and the Directlogic controller and card. The machine works well and will come with the fuel pump as well. I have put a brand new motor on the fuel pump also. I will ship this by freight anywhere in the lower 48 states. I'll cover anything over $400 for freight costs. I make several cross country trips a year. So if you are somewhere close to my route I will be glad to stop by and help you get started if needed. Local pickup is also an option. I have some chemicals available if you pick it up locally. Thanks for looking.
This biodiesel processing system was constructed in 2008 and is in 100% working order. This system can produce biodiesel from various feedstocks. Including but notlimited to: used cooking oil, virgin vegetable oils, fish oil, lard, tallow, and allother animal fats. It can handle high FFA feedstocks as well. Using acid/base processing, and frequently processes feedstocks with 10% or more FFA. Reaction tanks are constructed of both stainless steel(304) and carbon steel. Total capacity of reactors is 2,700 gallons, and batch processing time is 48 hours. With effective batch management the facility can be optimized for 500,000 gallons per year, or more. The facility is located in beautiful Costa Rica and the price of the system is FOB Costa Rica. It can be crated and loaded into two full size containers for shipment worldwide. System footprint ... moreis 2.000 square feet. All processing systems are semi-automated and include agitation systems. Agitation systems are powered by electric motors and gearboxes or pneumatic motors. Complete systems include: Industrial Filtration Systems Pre-Heat and/or reaction tank: 550 gal Centrifuge dewatering and filtering tank: 300 gallon 3 biodiesel reactor tanks(1 stainless 550 gal. 1 carbon steel 550 gal, 1 carbon steel 1,000 gal) Methanol distillation and recovery system(98%99% purity) tank. Agitation, reflux column, industrial heat exchangers, chiller with temp. control, compressor Production equipment for natural cosmetics using the glycerin by-product as feedstock More detailed information here: http:www.dieselloverde.com/facility.php
You are looking at a used"Hot Fox" fuel heater/coolant heat exchanger manufactured by Arctic Fox. This unit is designed for 10-12" deep diesel tanks. However with a longer 1/2" NPT pickup extension it will fit into deeper tanks. Made in USA. Stainless steel, all welded construction. The fuel heater being auctioned is the one pictured- what you see is what you get(tape measure not included of course) Condition: Used. Date of mfg unknown. Pressure tested to 25 psi- no leaks. Fully serviceable. Cosmetic flaws: one very small ding in main tube(see picture) minor scratches. Dimensions: 1/2" FPT Fuel fittings(outlet has a 3/8" flare adapter. Inlet has a brass extension) 1/2" FPT coolant fittings. 1 1/3" profile above flange. Tube drop below bottom of flange is without extension is 9" The installed brass ... moreextension has been cut to 3/4" Unit came from a 10" deep tank) 1 1/2" diameter tube. 3" diameter 5 hole pattern fits in a standard diesel tank sending unit location. Manufacturer's specifications here: Shipping details: North American shipping only- US and Canada. Also available for local pickup(Northern Atlanta Metropolitan area. GA) This heater fits in a USPS 12x12x5 1/2" box. This unit retails for over $220. This is a no reserve auction with a low starting bid. Any questions? Use the"ask seller" feature or call directly at(678) 967-9339 from 9am to 9pm EST and I will answer your inquiry as soon as possible.
unused pump. Its working condition. like new with one fan blade chipped off. it doesn't affect the operation. please see pictures. its made in Italy. rotary vane. Self priming transfer pump. The pump is cast iron and produces a flow rate of 18 GPM. It is powered by 115 volt AC and includes a power cable. The inlet and outlet are 1 NPT. There is an internal bypass valve at the rate of 27 PSI and a built in strainer. The pump is compatible with diesel, light oil and antifreeze fluids. here is the manual/spec. Posted with
J. Little Mercer Co. Inc. Data for equipment A-4515 2.600 gal POLY TANK Manufacturer Ace ROTO Mold Dimensions 88" dia. x 93" w/32" coned bottom. 14"dished top Construction/configuration vertical Inlets/outlets 16" tmw. 2.5" bottom center out, top inlets General data Includes steel stand. Last used for biofuel Includes steel stand. Last used for biofuel 2 available. this auction is for one Unit is used but in good condition. Sold as-is power washed before shipping. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes ... morecare of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
7488 gallon vertical fiberglass dish bottom storage tank measures 9'0" in diameter X 16'3" high on the straight side with a 4'0" high skirt. Tank has a 16" deep dished bottom with a 3" bottom flanged drain fitting; a 24" side man way and assorted fittings on the top for plumbing. Tank was manufactured by Southeastern Fiberglass Products in Bamberg. SC in 1999, has a specific gravity rating of 1.1, a design temperature is ambient. Tank resin makeup is: Liner: Hetron 922, Structure: Isophthalic, Barrier corrosion: C Vail. This tank was stood vertically and filled with water to check tank integrity and for leaks which none were found. The exterior has been pressure washed, primed and repainted with industrial enamel paint. Additional pictures, a detailed drawing and shipping quotes are available upon ... morerequest.
10.000 gallon black polyethylene vertical flat bottom tank measures 142" diameter X 148" on the straight side with a 16" dished top. Tank has a 18" square bolt on man way with a new EP sponge gasket on the tank and a new Teflon cover gasket. All bolts are stainless steel. Tank has a 18" top man way with a threaded cover. There are two 2" stainless bolt on fittings with a 2" threaded nipple on the bottom side for drains. Tank side wall has four 2" stainless bolt on fittings with a 2" threaded nipple for sight gauge. The tank top has six 2" threaded PVC nipples and one 4" PVC threaded nipple with a 4" flanged attached to it. This tank has been stood vertical, filled with water to check for integrity and for leaks which none were found. Additional pictures, a detailed drawing and shipping ... morequotes are available upon request.
Very nice gasboy pump. Like new condition, model 1820.
GREENFUELS FUELMATIC BIODIESEL PROCESSOR THIS MACHINE IS CAPABLE OF MAKING UPTO 8-10000 LITRES PER DAY. THE MACHINE IS SEMI AUTOMATED AND VERY SIMPLE TO USE. CHEMICALS ARE INJECTED AUTOMATICALLY. GLYCERINE IS ALSO PUMPED AWAY AUTOMATICALLY. THIS MACHINE HAS 2 X RESIN TOWERS THAT POLISH THE BIODIESEL WITHOUT THE NEED FOR WATER WASHING. How the FuelMatic works The feedstock is heated. Then measured into the reaction vessels where methanol and methylate are accurately injected into the flow, Once the reaction is complete the mixture of crude biodiesel and crude glycerine is channelled through to the GSX separation unit where the two products are cleanly separated and the glycerine is discharged to storage. The crude biodiesel then passes through our purification process where any impurities are removed through an ion exchange process. Finally ... morethe residual methanol is recovered for reuse and the resulting biodiesel is automatically discharged to site storage. For commercial use. Our highest selling processor, the 20,000 litre FuelMatic, is designed as a flexible, shrink-wrapped product, allowing biodiesel producers to go to market within 3 months, many times faster than previous generations of biodiesel technology. It can be housed in a 40-foot container, run in a major city or on a small, community scale in remote locations using readily available, locally grown or waste feedstock with the resulting fuel used for transport or to generate power. Key Benefits High product yields- 1.01 litres biodiesel per litre input oil, Low energy demand- the plant system uses less than 50kWh per ton. Commercial grade fuel- EU EN:14214& US ASTM-6751 standard, High flexibility- a variety of input oils(feedstocks) can be processed. Minimal waste and no waste water, PLEASE NOTE ITEM IS LOCATED IN THE UNITED KINGDOM. WE CAN SHIP THIS MACHINE IN A CONTAINER WORLDWIDE. SHIPPING WILL BE BASED ON COST.
Used but fully functional Fill Rite Fuel Transfer Pump with all the hoses and nozzle needed. Please contact me if interested and the shipping quote seems wrong. Thanks
Every thing you need to start your own business! This is a LARGE commercial sized bio-diesel processing system. 1 or 2 batches can be done at a time. producing about 400 gallons of B100 finished product per batch. 4 batches can be made a day if running full speed = 1.600 gallons of finished product a day if desired. For every gallon of bio-diesel that you produce the government with give you $1.00. Your"waste" is 80 gallons of glycerin for every 400 gallons of finished product. Glycerin is also very valuable. So in the end you really have no waste! All tanks are HDPE plastic- FDA approved) 2- 1000gal 45 degree cone bottom- finish product tanks with steel stands in containment unit 1- 1000gal 45 degree cone bottom- mixer with steel stand in containment unit 2- 500gal 45 degree cone bottom- batch tanks with steel stand 4- 500gal 45 ... moredegree cone bottom- settle tanks with steel stand 1- 500gal 45 degree cone bottom- dry wash with steel stand 1- 1000gal bulk container. 6- jet pumps. 1- Honda Water Pump Over $15.000 in tanks, stands and, containment's alone. These are NOT water tanks. They are rated for oil. This comes with everything you need to be fully operational. Including motors. Pumps, valves, piping, gauges, fittings, furnace All tanks are still in like new condition. Only used 3 or 4 times. System located in Newbury. MA Willing to load, and deliver. for an extra charge. SMALLER SYSTEMS SELL FOR UPWARDS OF $50.000! A simliar system called B-500 Continuous Batch Commercial Biodiesel Plant Sells for $50.00 0. You can see it on google. Please contact for more information. And to set up a time to check it out. Here is a list of the more common feedstock that can be used to make bio-diesel: Waste vegetable oil(WVO) Soybean oil Jatropha oil sunflower oil Animal fat Chinese tallow Coconut oil Rapeseed oil Linseed oil Palm seed oil Canola oil Algae oil The list goes on and on. PAYMENT OPTIONS. MONEY ORDER OR CASHIERS CHECK. This a large system. We would be happy to help disassemble free of charge. We wou
This is a true classic and daily driver. Nice small diesel/fuel conserving engine since it is a stickshift 220D. True classic import with dashboard reading kilometers per hour not mph. Odometer does not work. Gas gauge does though. A/c works and blows cold. Great running daily driver and great classic that I would drive up hill to work everyday so you know it is a strong engine. It use to be owned by someone that ran it off of vegetable oil. But I have since cleaned the gas tank out and converted it back, so it will run forever if you run it on diesel or biodiesel. Runs on biodiedel and diesel in any mixture. Steering wheel is strong but is showing some cracking. I also took pictures of the seat rip that has gaffer tape covering it and the two tears in the dashboard. Also has a nice plastic dashboard protector to save it from the sun. Awesome ... morecar and rare find.
Offered here is a Westfalia SB 60-06-576 Separator/Centrifuge. There are several of this model available all from a shuttered coatings manufacturer. These units would make great Waste vegetable oil or used/waste motor solid and water removal. Specs for this unit are: Permissible density of product to be treated 1.1 kg.dm3 Solids 1.5 kg.dm3 The units were all running when the unit was idled. These units are complete with all ancillary pumps. Vessels and control systems. All controls are explosion proof. Motors are 230/460 three phase 60 Hz. These units come with all manuals and spare parts which will be negotiated as each unit sells. Parts will be divided evenly among units of the same model numbers. Dismantling and shipping will have to be coordinated with both parties. We have crews available to prepare and ship all assets for sale. Additional ... morecosts will be incurred for these services. Many more centrifuges and various other processing equipment available from this facility just message us and let us know what you are looking for and we will put it up for sale on eBay. WORLDWIDE SHIPPING AVAILABLE ON ALL EQUIPMENT! Thanks for looking and have a wonderful day! On Apr-14-13 at 09:57:32 PDT. Seller added the following information:
25.000 gallon carbon steel horizontal skid mounted tank measures 11’0” in diameter X 35’3” long. Tank has a 22” man way and a 4” drain fitting welded into each end. This tank is supported with a 6” X 6” X 37’6” long steel skid. Additional pictures, a detailed drawing and delivery quotes are available upon request. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-1403cd07a55-0xee-
NIBCO BRASS BALL VALVE 3" 600 WOG Was mounted on the clean and dry side of an air receiver. Disassembled. Cleaned, ready to handle fluid or gas. Posted with
Used diesel transfer tank with fill rite 800c hose and pump. No holes or rust on the tank. Pump works fine with 6098 gallons pumped. I believe the capacity is around 110 gallons. Actual dimensions are 54" length, 31" width, and 25" height. Price is for pickup only. If customer desires tank to be shipped, actual shipping charges will apply. No charges for palletizing. If there are any questions please call 570.510.9906
Dunn Double Wall Oil or Biodiesel Tank. With everything to dispense and measure oil from the back of your truck. Everything is like new. All items are top brands. The unit has 2 separate 50 gallon tanks with a jacket. The jacket can be used for waste oil. You will save about $2000. over new delivered cost. As a bonus there is about 30 gal of new Delo 15-40 engine oil in the tanks.That works out to be about $600. worth of oil. Local pickup only in Sonoma. CA
I built this from a processor kit and wash tank kit purchased from Utah Biodiesel Supply. I have made ASTM quality bio for several years with this setup. We are selling our diesel car and I no longer need to make bio. This utilizes a 65 gallon water heater so that I can make 45 gallon batches. Heating element was replaced last month. Pump was replaced 6 months ago. Processor and wash tank are mounted on a rolling cart for easy movement to clean behind it or move around. With"gas station" nozzle you can pump filtered dried biodiesel direct from the wash tank to your car. I will provide to the buyer any remaining methanol. KOH, and WVO. Local pickup only or may be able to help transport in Georgia
This works great and has a very strong magnet. Thanks for your interest
Simple Centrifuge" Made in the USA Clean waste vegetable oil(WVO) Bio diesel, lube oils, and even hydraulic oil in your garage. Purchased this unit just over a year ago. I tried many different filtering methods but found this unit was the most thorough and economical to use. I paid just over $1.500 for the unit. You can visit the company website SimpleCentrifuge to view the unit in action. I no longer make biodiesel and am liquidating all my equipment. The Centrifuge works perfectly. If you are in the market for a good quality Centrifuge. You can save hundreds of dollars by purchasing this unit. FREE SHIPPING! Bid with confidence. Check my 100% feedback. From the Simple Centrifuge website: How much does it cost to run? The machine is modestly sized. Large enough to clean hundreds of gallons per week yet small enough that it is inexpensive ... moreto run. Just pennies per day. How much product can I run per hour? This depends on your product. Heated oils can be processed at a rate of over 20 gallons per hour. The slower you go the finer the particulate it will capture. What kinds of products can I run through the machine? Successfully run WVO. Lube oils and hydraulic oil. Most any liquid can be processed. What kind of power requirements does the machine need? Single phase 110v. Can I set this machine up in my garage? You bet. The machine is small enough and quiet enough to put anyplace near for feed stock. How well does it clean the product? Easily down to 1 micron. Unlike filters it can capture smaller particulate based on its weight. Not size, so not only does it capture small carbons but it can capture water. What is the maintenance? The machine should be wiped down between usages.
US Filtermaxx 3000G Centrifuge Manufacturer Reman 3000 G Classic Type 60% New Parts. Low hours on motor. Some parts may have residual oil on them. Free Shipping 904 334 2838
Offering a food grade used tote. Schutz 275 gallon. Metal cage and pallet.send any questions. I have many of these. Located near Salem Oregon. Biodiesel water storage fertilizer tank gutter rain supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasicFree.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf.
Up for sale is my WVO/Biodiesel process supplied. I have a 200 PSI bag filter housing(pressure vessel) A 1/3 HP pump from Redline pump and a 400⁰F 55 gallon barrel band heater. I purchased this equipment new and used it to filter and dewater WVO that I used for my 2-3 hour daily commute. I used to commute from Salem Oregon to Portland Oregon every day- a distance of 100 to 110 miles that took me anywhere from 1 to 1.5 hours one way. I got the WVO from our café at work, took it home and put it in a 55 gallon drum where I heated it for 1-2 days with the band heater. Once heated to ~100 degrees, I bled the water out of the mixture, then filtered the WVO through a 5 micron 4"x8" sock filter into clean containers. What came out was a nice clear amber color(looked like Light Beer) and I used that in my VW auxiliary heated fuel tank. ... moreI would start the car on Diesel, warm it up for a few miles, then switch over to WVO for the majority of my commute. Once I got to work I shut down on Diesel. I did this for 2 years and ran about 66 gallons of WVO fuel per month through my car. The system worked flawlessly and saved me a ton of money. My best month of commuting costs I made two trips to Seattle from Salem in addition to my normal commute for a total of 275 MPG on fuel I was paying for. That month I made these trips using only one tank of diesel. Anyway, I now have a 7-minute walk to work everyday, so WVO just doesn’t work for me any more. I have had this stuff sitting in my garage for the past 2 years doing nothing. Now I wish to just get rid of. I decided to sell as a block as I just want to get rid of it and figured I could sell it one fell swoop. My reserve on this is low compared to what I originally paid. So here is what I have for sale: Redline 2000 Pump This pump has a 1/3 HP electric motor with a belt driven pump. The Motor is a Dayton electric motor model# 6K778G. According to the project specs, the motor is a"Belt Drive Motor, Split-Phase, 1/3 HP, Nameplate RPM 1725, Voltage 115, 1 Phase, Frame
I have for sale my biodiesel processor. I built this from plans I purchased from Utah Biodiesel Supply 3 years ago. Since then. I have used this processor to make high quality biodiesel from used vegetable oil that I've burned in my Ford F250 and my 2 VW diesels. This processor works great! The only reason I am selling it is because I want to build a bigger one and I need to move this one before going larger. This processor yields about 25 gallons of high quality biodiesel per batch and 1 batch will take you about 1-2 days depending how much time you've got. I also added several enhancements to the plans by adding a separate wash tank and a settling tank that are both the cone bottom design which allows you to have up to 3 batches in-process at the same time. I also added a smaller cone bottom tank for mixing the catalyst. Also, I ... moreput the entire unit into a 4' X 5' plastic vat so if there is an oil spill, it will contain it instead of it running all over your garage or shop floor. This vat also makes it very convenient to move the processor in one contained unit with a tractor or forklift. The plans call for 1 pump, but with the extra tanks, this has 2 pumps to move the oil. It also has 2 filters to filter the final product down to 10 microns before you put it in your vehicle. I have over $2500 worth of materials invested in this processor but I'm letting it go CHEAP because I need to move it and it has just about paid for itself in fuel savings. I have the reserve set at $500- you couldn't build one for that price- that's 80% off of the cost of the parts to build it! With my present setup, this processor will make good biodiesel for about $1.07/gal. If you have a flatbed or a trailer, I can load it for you.
Simple Centrifuge. Made in the USA. This is a beautiful centrifuge made with a Simple Centrifuge drum. The bowl is aluminum. The frame is steel and it has a clear plexiglass top so you can see the oil as it cleans. Note: When Simple Centrifuge started you could only buy their drum and then you needed to make your own centrifuge using their drum. This is a centrifuge made that way. Clean waste vegetable oil(WVO) Bio diesel, lube oils, and even hydraulic oil in your garage. Purchased this unit a couple of years ago, and have cleaned hundreds of gallons of Waste Veggie Oil with it. VERY reliable unit! I tried many different filtering methods but found this unit was the most thorough and economical to use. I paid just over $1.200 for the unit. You can visit the company website SimpleCentrifuge.com to view the unit in action. I sold my veggie ... moreoil truck and am liquidating all my equipment. The centrifuge works perfectly. If you're in the market for a good quality centrifuge. You can save hundreds of dollars by purchasing this unit. Stands a little over 3 feet tall. It has a few small blemishes(you'd have to look hard. Mostly a ding here or a scratch there) and is ready to use right out-of-the-box. Powered by The free listing tool. List your items fast and easy and manage your active items.
I do not know anything about these pumps. I received them in a storage auction. They're all in used condition. They all seem to be covered with diesel fuel or something similar but I am going to find out out to clean them before shipment. One of them is missing the top spout(last picture) and 2 of them look like they're missing something on the bottom. I'm not sure if these pieces are optional or not. Please ask any questions you may have to ensure a satisfactory sale. I have never tested these but I am more than happy to put them through any simple test you can guide me through. This auction is for four zee line pumps in used. Unknown condition. They look and feel usable. None of them are locked up or anything like that. Feel free to contact me 2033760272 Posted with
This was very expensive when I bought it new and the car was damaged beyond repairs. I replaced the filter so its new and perfect working order. Shipping is 12.50 anywhere in the cont. 48 states.
I am selling one of my WMO WVO centrifuges. It is based on a pressure cooker design. I am using a raw power centrifuge bowl( coupled to a 3450 rpm motor which is driven by a Fincor VFD(variable frequency drive) to spin the centrifuge at 6000 rpm. I built two of these and one was for a friend who changed his mind. I have some photos attached of the build of the unit for sale as well as some youtube videos of mine in action. These work very well at cleaning oil. All the parts are used so it is sold as is but guaranteed not DOA. The motor/vfd will require 220 volt single phase ac in order to operate. This is common in most garages or dryer hookups. It will come with the motor. Bowl and legs detached but I will include all the hardware, VFD manual and some instructions on how to use the centrifuge. You will need to supply a 220 plug, available ... moreat Lowes, Home Depot and a way to feed oil to the centrifuge. I use a 5 gallon bucket suspended above mine with a ball valve to control the flow rate. Please email any questions prior to bidding. Starting at about 1/3 the price of new VFD controlled centrifuges.
J. Little Mercer Co. Inc. E-3903 528 gallon Stainless steel JACKETED TANK. Model/serial no. 27455. 1976. Manufacturer CHEMTEX TANKS. Dimensions 52" x 57.5" 58.5" slant bottom. Open top. PSI:Jkt:in 50 psi@ 300 degF, Inlets/outlets 2" bottom center outlet. 1.5" jacket i/o. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections ... morewelcome. Sold as is. Item to be paid in full before shipping. EXCELLENT!
This is a used but in great condition heated and insulated used cooking oil recycler. This is a self contained unit that operates on 110 volt and works well. The pump was changed in February 2013 tank measures 5 feet 8 inches high x 38 inches wide x 24 inches deep. Tank is estimated at 225 gallons and weighs around 700 lbs. Item to be Picked Up at Location and I can help load. I will help with shipping but you will have to have the carrier of your choice pickup here. Feel Free to ask any questions you may have and I will do my best to answer.
5000 Gallon Steel Tank. 1/4" Steel, Double Walled, UL Approved for Flammable and Combustible Liquids, Ladders and Safety Rails Included but removed for shipping. 2" threaded bottom outlet. 2 1/2" flanged outlet. Man-way cleanout. Ultrasonic level sensor attached. 4" and 8" inlet. 6 Tanks Available. Price is for 1 tank. Manual and Automatic Pneumatic valves are available but not included. Great for Bio-diesel, Biodiesel, Bio Diesel plant or other alternative fuels. 3- 5hp Baldor right angle, gear reduction agitators available but not included. 3hp and 5hp Baldor 3ph gear pumps available but not included. Tanks are in excellent condition, only used for a few months, new startup company didn't make it. Tanks sold for $35,000+ each originally.
Domain details on domaindrive-thru.com website. After full payment has been received. Domain will be transfered to buyer usually within 24 hours. For transactions over $999, will be used to transfer payment and domain.
PLEASE NOTE: Our website cmsurplus carries products of all kinds and nature mostly aftermarket automotive. Tools, industrial and household items. We always describe the items to the best of ability. If you have any questions contact us, 33 L/MIN DC PORTABLE CAST FUEL TRANSFER PUMP FOR DIESEL BIODIESEL AND KEROSENE USED AND COMES WITH ALL THE HOES AND HANDLE. SOLD AS IS. VERY VERY NICE CONDITION.
THIS IS MADE BY SANDPIPER'S COMPANY CUSTOM BUILD FOR A CHEMICAL COMPANY IT HAS THE COMPANY INFO TAG DOES NOT SAY SANDPIPER ON TAG ONLY THE COMPANY NAME( LOGO) THIS IS A GREAT PUMP SAME SPEC AS THIS BELOW FOR EXAMPLE- P/N PB ¼.VS3PP ¼” NPT(internal)1/2” NPT(external) Intake and Discharge pipe size 4 GPM. Up to 100 PSI Made from Teflon(PTFE) and other chemically inert materials; made for spark-free chemical pumping ANY QUESTIONES PLEASE ASK BEFORE YOU BUY I WILL ANSWER AS QUICK AS POSSIBLE THANKS PLEASE DO NOT LEAVE NEGATIVE FEEDBACKS CONTACT ME AND I WILL RESOLVE ANY ISSUE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1420d6f1308-0x108-
This lightly used centrifuge can process up to 1.8 gpm removing sub micron particles from the fluid. Operation is specific to manufacturers instructions found on the Internet. Includes fittings. Valves, fittings, bracket and pressure gauge. Does not include a pump.
This is a custom made pump used to collect oil Used very little SUPER HEAVY DUTY will pump anything BSM gear pump. With 1/2 hp 110v electric motor 484-213-1081 Dave
Owens Corning fiberglass 550 gallon tank. This is a single wall tank. As most are. If you need a tank that has leak monitoring and requires a double wall, this is not for you. I had someone bid on it who needed a double wall tank and now I have to relist it again. Please be aware of this if it is a requirement for you. It was in the ground for only a few months and was then removed for an upgrade. I bought it to use for biodiesel. But never did as I never had enough oil at one time to justify using it. Large diameter threaded fittings make it easy to access inside of tank and makes it easy for cleaning. Local pick up, freight, or I may be able to arrange a local delivery for you. Any questions just ask.
500 Gallon HDPE Poly Cone Bottom Mixing Tank w/ Steel Stand Biodiesel WVO Soap Used tank in good condition. Some discoloration and staining. Some scratches and scuffs. Mostly outside. Great tank for biodiesel or WVO. Nice sturdy steel stand included. Last used for mixing soap/cleaning supplies. Includes bulkhead fitting on the bottom and two ball valves. Tank measures approx. 52" in diameter with an overall height of 80" Will have to ship freight. Please send zip code for an rough estimate of freight costs. NMFC will be 41024-3 with a freight class of 125. For an example. A similar tank shipped from OR to NM last year for around $400-$450, but freight charges change all the time. Local pick up is also acceptable. Sold"as is" without warranty expressed or implied. Buyer is responsible for determining the suitability of ... morethis product for their application. All items are sold as is FOB Hillsboro. OR. Buyer is responsible for shipping and handling or freight charges. Small items will be shipped USPS or FedEx Ground unless other arrangements are made.
250 Gallon totes. Last used to store used cooking oil(UVO) Will hold oil, outside/inside are dirty with vegi oil. Will assist in loading your truck Call Jason at 518 361 3908 for more info/ pickup
This listing is for 55 gallons of filtered and centrifuged waste vegetable oil(WVO) sometime this is know as used fryer oil(UFO) The oil was previously used in restaurant deep fryers. This WVO is not for human or animal consumption. Some people use WVO as fuel in diesel engines or in special furnaces to heat shops and garages. You will need to make a determination of the suitability of this oil for whatever your intended purpose. If you wish to perform a pan test. I will provide electricity for your hotplate and pan. I am unable to offer shipping or delivery. This is pickup only. Pickup on weekends is preferred. Although I may have some weeknight flexibility. You can park outside my garage and I will pump the oil into suitable container(s) that you provide. Cash at the time of pickup is the only acceptable form of payment. PAYPAL IS NOT AN ... moreACCEPTABLE FORM OF PAYMENT- eBay would not let me list without including PayPal. Before buying. Please send me any questions you may have about this listing and I will get back to you within 2 days. I usually check and respond to email in the evenings. I am also willing to call you or email if you provide your contact information(email/phone) If you have questions not directly related to this listing(WVO. Pan testing, centrifuges, furnaces, diesel engines, carbon neutrality, biodiesel, flat plate heat exchangers, heated injector lines) please do your own research as I don't want to provide you with any misinformation. There are an almost unlimited number of online sources of information for these topics.
Ultimate Stainless Steel 5 Ingredient Fluid Mixing Plant We have used this as a fertilizer mixing plant. But it could be used for chemical mixing or emulsion asphalt or similar applications. Fully automated system with control panel(can also be run manually) 15 ton dump tank· Above the dump tank there is a 10 ton stainless steel liquid mix plant 6 x 5 inch Deming pump· 12" dump valve on bottom of mixer to dump tank· 6) 4" ingredient pumps with turbine meters· Overhead 35 ton steep cone stainless steel tank. Air operated dump gate(liquid or dry) 3) load out systems· 150 ton/hour· Electric boxes included· plus much more(call for details) This plant has a Crane Deming liquid pump to bring in the liquid ingredients for mixing. It is currently set up for mixing 5 ingredients. There is a control panel ... morethat can aid in the mixing application. Air operated valves. Toledo load cells with digial readout. If you are interested we can provide much more detail either by email or calling(518) 371-0288. We also have other plants and equipment for sale. The buyer is responsible for transporting the equipment. The buyer is also responsible to arrange for the equipment to be disassembled. We could provide recommendations. We will be able to assist with loading the equipment. A nonrefundable $500 deposit will be due within 5 days of the auction end and the remainder will be due prior to picking up the equipment. Powered by The free listing tool. List your items fast and easy and manage your active items.
Up for sale is a GAST Model 1UP-NCW-2A Air Motor. Shaft and Mixing Paddles Total length with paddle is 36" Second paddle is 28" Unit is in excellent working condition. Please see pictures for overall condition Continental U.S. Shipping only
HELLO! UP FOR SALE IS THIS FREEDOM FUELER HOME BIO-DIESEL PROCESSOR KIT. DESPITE BEING PREVIOUSLY USED. THIS KIT APPEARS COMPLETE, UNDAMAGED AND IN GREAT CONDITION TO BE USED ONCE AGAIN. Converts even heavily used oils and fats. Completely closed system with built in 7' vent lines. Dimensions: 48in. Long. 24in. Wide, and 62in. High Weight: Heated: 250 lbs. THIS UNIT IS FOR LOCAL PICK-UP ONLY. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANKS FOR LOOKING! Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14364304670-0xdc-
Used processor. have manuals. Supplies, can give direction to get up and running. does 150 gal per batch, in each tank. unlike some systems with this you can brew in one tank and wash/dry in the other, allows you to have 2 batches in process at the same time. easily produce 300 gallons per day. if you have your feet wet and have done small batches this is the next step. we will help you grow, but if you have never processed a batch of bio before this probably isn't for you. no problems or issues with the unit. very good condition. includes a 100 gallon commercial natural gas water heater which alone new cost is mega $$. package price. can load. will sell for less without water heater. email if need additional information could deliver and set up for fee. check feedback. buy with confidence.
Biodiesel mixing device. This is a 60 gallon capacity mixing device meant to thoroughly mix heavy oils and grease for the production of biodiesel. The tank is made by Ace Roto-Mold whom is well known for their quality plastic tanks. This device is equipped with two in-line filters. A pump, a heating element directly above the pump, a thermostat and a commercial grade hose nozzle(rated for flammable liquids) How it works: the pump pulls the mixture through the bottom of the tank and sends the solution through the heating element- the two filters- then returns it through the top of the tank. This device mixes solutions very well in a short amount of time.
PICKMYPICK If you find this item interesting and would like to see more collectibles please check out my other items at my eBay store. Here is the link For sale is a set of 100% authentic Vintage CALIFORNIA personalized license plates"VEGE CAR" These plates are DMV clear and ready to be registered to your Biodiesel car or truck and mounted proudly. If you are a Biodiesel dealer or are rolling large in a Biodiesel car show the other wannabe's that you are the real deal. Here is the ultimate statement piece to show you care about the environment. If you buy this plate and send me a picture showing me your Biodiesel car or that you are a Biodiesel Dealer I will refund you $20 bucks.
This is your opportunity to own some of the finest biofuel equipment on the market! I have used this equipment to produce approximately 700-1000 gal/yr since 2008. This auction gives you everything you need to get start producing except for the chemicals. I was set up to pay tax on my fuel and with that put me at about $1.80/gal. As you can see from pics this is all the highest quality components that have cost me a fortune. For the buy it now price you get EVERYTHING including the oil pictured. I will work with winning bidder to load or ship what they want or buy. Feel free with questions. The only reason for selling is that we are moving to a smaller property that does not have the space for this setup. I just finished using this setup in January.
Biodiesel Settle column tank liquid storage tank 1000 Gallons Each Tanks are 17' in height and 62" in diameter. Tanks are made of carbon steel. And have 1" outlet on bottom and 1" lower side discharge. and 1" outlet on the top and 1" riser. Tanks have 20" diameter man way. Tanks are used for separating liquids IE: heavy and light but could also be used for liquid storage. Four tanks available
Stainless Steel 3 5 Gallon Vertical tank Open Top Has bottom petcock Valve Drain. Standard Hose Bib Water Fill Built in Pump 19" Diameter 38" Tall 120V. 1 PH 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143e3954274-0x108-
Fuel Transfer unit what you see is what you get I can load.
New In Package Biodiesel Basics DVD Free& Fast One Business Day Shipping! Only $18.99! Biodiesel Basics" is a one hour video tour of the biodiesel production facility that Author William"Bill" Kemp set up in his garage. It takes you step-by-step through the process of turning waste vegetable oil into ASTM quality biodiesel. The emphasis in Bill's production process is safety first. And producing high quality biodiesel while doing the right thing for the environment. It also includes a detailed a 30 minute interview with Bill where he deals with energy issues relating to biofuels and with biodiese specifically. International orders welcome. We ship to every country. HAVE QUESTIONS ~ CALL TOLL-FREE ~ 1-877-739-2787 Shipping& Handling in the U.S. is free by First Class Mail. INTERNATIONAL SHIPPING TERMS: Yes we combine ... moreitems to lower S&H fees. To receive S&H discounts. On two or more items, you must send only one payment. If you purchase more than one item please wait for us to send you a combined invoice. Each payment is considered an order. If you send two separate payments, your items will not be combined and you will not receive a discount on S&H fees. S&H fees are based on the total value of the items– not just the size of the item. S&H fees on a low value shipments. Which are very small and light weight, is $10 for the first item and $5 for each additional item. First Class Mail is used on low value shipments. First Class Mail does not have a tracking number and cannot be insured. A low value shipment is any payment under $30. S&H fees on a mid value shipment is $22 for the first item and $11 for each additional item. Economy Priority Mail is used on mid value shipments. Economy Priority Mail does not have a tracking number and cannot be insured. A mid value shipment is any payment over $30 but under $100. High value shipments will only be sent by Priority Mail with tracking number and insurance. For example: if you purchase an item for $99 and the S&H fee
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 You are bidding on Marklin H 0 DB Biodiesel Tank Car from Marklin Starter Set. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Payment is due within 3 days of end of auction. The winning bidder pays shipping and handling by USPS with delivery confirmation. International bidders: the item will be shipped by registered airmail(Canada- $10. Worldwide- $15) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Please note that Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Normal 0 false false false EN-US X-NONE X-NONE Thanks for taking a look. Add me to your SAVED SELLER list to be notified of new listings, and be sure to check out my ... moreMarklin offerings. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!