|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Elk Grove Village, United States ONE AMERICAN RADIAL DRILL FOR SALE MODEL: HOLE WIZARD SERIAL NUMBER: 70958. YEAR: 1948. SPECIFICATIONS: LENGTH OF ARM: 3' COLUMN DIAMETER: 9" ... moreDRILLS TO CENTER OF CIRCLE ON BASE OR TABLE: 72" MAX DISTANCE. SPINDLE TO BASE: 51" MIN DISTANCE. SPINDLE TO BASE: 13" TRAVERSE OF SPINDLE: 12" SPINDLE TAPER: NO. 4 MORSE. HEAD TRAVEL ON RAIL: 25.25" SPINDLE SPEEDS: 12) 50-1500 RPM. FEEDS: 6) 004 TO.025 IPR. APPROX DIMENSIONS: 4' FB X 7' L X 8' H. APPROX WEIGHT: 6300 LBS. EQUIPPED WITH: 5 HP MOTOR. 240/480-3. POWER ELEVATION. MANUAL COLUMN CLAMP. UNIVERSAL BOX TABLE(20" X 24" TOP X 22"H) AS IS. FOB YOUR TRUCK. NO RETURNS. MACHINE#4505.
Buy It Now
Condition: Used Location: Santa Paula, United States Hammond Radial Drilling Machine. Works Excellent. unless otherwise specified. 25% cancellation fee.
Buy It Now
Condition: Used Location: Cincinnati, United States MILLPORT RADIAL DRILL. Spindle Speeds: (18) 25 - 1511 RPM. Distance From Spindle To Column Spindle Feeds: (4). 002. 004. 008. 012. 5 HP Two Speed Spindle ... moreMotor, 230/60/3. Power Colum Clamp. Box Table: 27-1/2" x 15-5/8" x 15"H.
Buy It Now
Condition: Used Location: Holt, United States NO SCORING ON COLUMN. 3 FT 9" COLUMN. ITS A GOOD DRILL. FINAL PRICE INCLUDES LOADING ON TRUCK. 4 MT IN SPINDLE.
Buy It Now
Condition: Used Location: Chippewa Falls, United States OOYA YMR-915 Radial Arm Drill in good working order
Buy It Now
Condition: Used Location: Cedarburg, United States Carlton Radial Arm Drill. Variable Speed: 159-3000 RPM. 4' x 11" Arm. WE'LL DO OURVERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
Buy It Now
Condition: Used Location: Cedarburg, United States Quill travel: 7” / 7”. 30" Rockwell Radial Arm Drill Press. 13” to 29” = 16” Travel / 9” to 30” = 21” Travel. Arm Travel - Column to Spindle (Retracted/Extended) ... more60 Head Tilt Travel. Vertical travel on column: 16” / 10”.
Buy It Now
Condition: Used Location: Lancaster, United States 6'19" CARLTON RADIAL DRILL#27051 Serial No. 4A-3354. Model 4A EQUIPPED WITH: Plain Box Table Tapping- L-Type" Base Power Elevation- Power ... moreClamping Power Head Traverse CATALOGUE SPECIFICATIONS: Arm Length. 6' Column Diameter. 19" Spindle Taper. 6 MT(36) Spindle Speeds. Range. 15 to 1500 RPM(18) Spindle Feeds. Range. 004 to.125 IPR(4) Tapping Leads. Range. 8 to 18 TPI Drills to Center of Circle on Base. 12' Spindle-Nose to Base. Maximum. 6'6" Spindle-Nose to Base. Minimum. 14-1/2" Spindle Radius. Maximum. 7'2" Spindle Radius. Minimum. 2'3" Face of Column to Spindle. Maximum. 6'4-1/2" Face of Column to Spindle. Minimum. 17-1/2" Vertical Spindle Travel in Head. 20" Vertical Arm Travel on Column. 3'7-1/2" Horizontal Head Travel on Arm. 4'10" Working Surface of Base. L x W. 77" x 50" Motor. Horsepower/RPM. 15 HP/1200 RPM Extreme Height. Column Above Floor. 11'9" Extreme Height. Head& Arm Extended. 12'2" Weight. Approximately. 23,210 LBS PRICE: F.O.B. OUR WAREHOUSE. $17.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
Buy It Now
Condition: Used Location: Louisville, United States Sharp RD820 - 3' Radial Arm Drill PressModel #: RD-820S/N:9863 (New in 1998)Arm (lateral) Travel: 3' (36")Column: 8"Taper in Spindle: #4 MorseT-Slotted ... moreRiser Block Table 19.5" x 15.5" x 15"Coolant pump in baseSpindle Motor: 2 Hp, 230/460V, 3 ph, 60 HzElevation Motor: 1 Hp, 230/460VSpindle Stroke: 8.25"Spindle Travel: 24.375"Distance from Column surface to spindle center (Min./Max.): 7-7/8" / 32-1/4"8" Quick Slide Drill Vise,
Buy It Now
Condition: Used Location: Cincinnati, United States CARLTON RADIAL DRILL. Spindle Speeds: (12) 60 to 1500 RPM. Face of Column to Center of Spindle: 4' Max., 9" Min. Traverse of Arm on Column: 2'4-1/2". ... moreVertical Travel of Spindle in Head: 12". 5 HP Drive Motor.
Buy It Now
Condition: Used Location: Pulaski, United States SKU: 2316767 A: 0013000000CXCfg O: 0065000000OyDhL PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no ... morereserve auction for a Delta Rockwell Ram-Type Radial Drill Press 15-120 Variable Speed 115V/1PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Delta Rockwell Model: 15-120 Type: Ram-Type Radial Drill Serial No: 1412293 Features/Specifications: Max. Swing: 60" Max. Throat: 30" Variable Speed: 175-1450 RPM 365-2800 RPM 600-4750 RPM 1030-8200 RPM Rockwell Motor: 1/2 HP- 115/230V- 7.8/3.9A 1725 RPM- 60 Hz- 1 PH Table Size: 18" x 26" Jacobs 633C/33 taper Dimensions& Weight: Dimensions: L 44" x W 31" x H 48" as shown) Shipping Weight: 560 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in a working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video
Buy It Now
Condition: Used Location: Louisville, United States MOREY HERCULES RADIAL DRILL PRESS. Column: 7". Power Down feed. 004.008.012. Spindle motor: 2.5 HP. Base table: 2' x 2'. Model: 2'/ 7-1/2". 14 Spindle ... morespeeds: 40 to 2000 rpm. Spindle travel.
Buy It Now
Condition: For parts or not working Location: Fort Myers, United States ONE AMERICAN RADIAL DRILL FOR SALE MODEL: HOLE WIZARD SERIAL NUMBER: 70958. YEAR: 1948. SPECIFICATIONS: LENGTH OF ARM: 3' COLUMN DIAMETER: 9" ... moreDRILLS TO CENTER OF CIRCLE ON BASE OR TABLE: 72" MAX DISTANCE. SPINDLE TO BASE: 51" MIN DISTANCE. SPINDLE TO BASE: 13" TRAVERSE OF SPINDLE: 12" SPINDLE TAPER: NO. 4 MORSE. HEAD TRAVEL ON RAIL: 25.25" SPINDLE SPEEDS: 12) 50-1500 RPM. FEEDS: 6) 004 TO.025 IPR. APPROX DIMENSIONS: 4' FB X 7' L X 8' H. APPROX WEIGHT: 6300 LBS. EQUIPPED WITH: 5 HP MOTOR. 240/480-3. POWER ELEVATION. MANUAL COLUMN CLAMP. UNIVERSAL BOX TABLE(20" X 24" TOP X 22"H) AS IS. FOB YOUR TRUCK. NO RETURNS. MACHINE#4505.
Buy It Now
$185.00 Shipping Condition: Used Location: Bristol, United States Light surface rust will cleanup alot of these are shape. local pick is ok.
Buy It Now
$185.00 Shipping Condition: Used Location: Bristol, United States 2-5/8 to 1". local pick is ok.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States The G7946 34" Floor Radial Drill Press boasts a 1/2 HP motor that smoothly powers the five spindle speeds ranging from 550 - 3000 RPM. The chuck accepts ... moredrill bits from 1/16"-5/8". 5-speed drill press works at a maximum speed of 3,000 RPM.
Buy It Now
Condition: Used Location: Hugo, United States Column: 11". Tilting work table 20.5" x 20.5" x 24"H. Overall Dim.: 6'L x 3' 10"W x 7' 7"H. 3 Down feeds: 20/25/11. We'll do our best to get you the lowest ... morerate possible. We also allow local pick-up here at our facility in Hugo, MN 55038.
Buy It Now
Condition: Used Location: Salem, United States .Drill Size. Spindle to Column (approx.). : 11" - 48".Arm Length: 5'.Cast Iron: 3/8".Table Size: 24" x 28".Table Rotates 90°. Electrics: 220-440 Volt ... more/ 3 Phase / 60 Cycle.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: SUNMAX. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, ... moredouble drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: For parts or not working Location: Fort Worth, United States Inventory Number: 01240900003. Capacity: 1850 RPM. Manufacturer: RICHMOND. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Howell, United States Hammond Cleveland Radial Arm Drill. arm travel: 24".
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: AB ARBOGA MASKINER. Inventory Number: 12231040021. Model Number: ER 830. Capacity: 8" X 3 FT. (c) Truckload and Partial Truckload: HGR can ... moreassist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Houston, United States You are purchasing a USED Carlton Radial Drill. TYPE: RADIAL DRILL. ARM: 5 FT ARM. SEMI CIRCLE BASE. Local pick upavailable. SOLD EXACTLY AS SHOWN IN ... morePHOTOS.
Buy It Now
Condition: Seller refurbished Location: Houston, United States cnc machining and manufacturing shop. For sale small manufacturing shop Includes 1 lathe 1995 mazak qt-25l Mill John ford vmc 1300hd Manual lathe TIMEMASTER ... moreGAP BED LATHE 28” swing Manual mill GIDDINGS & LEWIS 951 RADIAL ARM DRILL All under power ready to test Buyer is responsible for rigging.
Buy It Now
Condition: Used Location: Toledo, United States HEAD TRAVEL ON ARM. . 60" / 5'. ARM LENGTH. . VERTICAL ARM TRAVEL ON COLUMN. 25". BASE. . 36" X 64". (18). 0012 TO. 472. SPINDLE TRAVEL. 12".
Buy It Now
Condition: Used Location: Holland, United States TAP LEADS 8, 11-1/2, 14, 18 TPI. AREA OF BASE 64" X 50". POWER HEAD TRAVERSE YES. DISTANCE SPINDLE TO BASE 14-1/2" MIN, 72" MAX. DISTANCE SPINDLE TO COLUMN ... more13-1/4" MIN, 60" MAX. FEEDS (18). 004 TO. 125 IPR.
Buy It Now
Condition: Used Location: Hugo, United States Modigs RBM28B 7" x 2' Radial Arm Drill. Model: RBM28B. Column: 7". Power Down feed. 8 Spindle speeds: 20 to 1,535 rpm. Also machines can be inspected ... moreunder power here at our facility in Hugo, MN 55038.
Buy It Now
Condition: Used Location: Lancaster, United States Thread Tap Leads: 4-1/2, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 24 TPI. Power Clamping of Head on Arm and Arm Rotation. Traverse of Head on Arm: 48.8" ... more(1240 mm). New Date: 1994. Vertical Travel of Arm on Column: 23.62" (600 mm).
Buy It Now
Free Shipping Condition: Used Location: Youngstown, United States Will fit SQT15, SQT18, SQT18MY and QTN250. ER32 Collet. MAZAK SQT15/SQT18/QTN250. OEM Radial (X) Live Tool. Live Tool Holder for. GOOD USED Condition ... more! Part # Unknown (OEM). Actual item pictured.
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States This chuck opens 3/8"-1". The chuck opens and closes fully and smoothly. Manufacturer: Jacobs. The sale of this item may be subject to regulation by the ... moreFood and Drug Administration and state and local regulatory agencies.
Buy It Now
$77.61 Shipping Condition: Used Location: Los Angeles, United States Heavy Duty. High Quality Material. Good for precision machine and ground.This boring bar holder is a must-have for any machinist out there. With its precision ... moreengineering and durable construction, it can handle all your CNC needs.
Buy It Now
Free Shipping Condition: New Location: Lawrenceville, United States 8pc Front & Rear High Carbon Steel Brake Rotor + Carbon Fiber Ceramic Brake Pad Kit Kit Includes: 2x - Both Front High Carbon Steel Disc Brake Rotors: ... moreS-55150 2x - Both Rear High Carbon Steel Disc Brake Rotors: S-55151 2x Front Carbon Fiber Ceramic Brake Pads (Hardware Included): P-1169 2x Rear Carbon Fiber Ceramic Brake Pads (Hardware Included): P-1707 Specifications: Zinc Dichromate Plating for Rust Prevention For Both Driver & Passenger Side Fits Both Front & Rear Position Cast from OE Grade Alloy Machined to OE Specs Direct Replacement.
Buy It Now
Condition: Used Location: Holland, United States TAP LEADS 8, 11-1/2, 14, 18 TPI. AREA OF BASE 64" X 50". POWER HEAD TRAVERSE YES. DISTANCE SPINDLE TO BASE 14-1/2" MIN, 72" MAX. DISTANCE SPINDLE TO COLUMN ... more13-1/4" MIN, 60" MAX. FEEDS (18). 004 TO. 125 IPR.
Buy It Now
Condition: Used Location: Hugo, United States Model: Economax. Arm traverse on column: 44". Max/min spindle radius: 70"/26". Spindle travel: 18". Spindle feeds: 18. Column: 15". Overall Dim.: 10'L ... morex 4'W x 11' 5"H. 36 Spindle speeds: 20 to 1,406 rpm.
Buy It Now
Condition: Used Location: Holland, United States SWIVEL OF COLUMN ON BASE 360 DEGREES MANUAL. SWIVEL OF SPINDLE 90 DEGREES. SWIVEL OF TRUNNION 180 DEGREES. HORIZONTAL ARM TRAVEL ON HEAD 24". LENGTH OF ... moreARM 4'. ARM TRAVERSE YES. VERTICAL HEAD TRAVEL OF COLUMN 54".
Buy It Now
Condition: Used Location: Rochester, United States Make: Johansson. Type: Radial Drill Press. Electric :440V 3 Phase. Speeds: (8) 80, 120, 400, 600, 180, 240, 800, 1200. The drill press is exactly as pictured. ... moreTable Size: 38" x 19". Serial: 21 711.
Buy It Now
$14.00 Shipping Condition: Used Location: Temecula, United States I had this drill press offered local but didn't have any reasonable offers so I am in the process of parting it out. This is the complete drill head ... morecase just as it came off the working unit. The head case. Spindle, pinion shaft, return spring, chuck, chuck key depth gauge for a Rockwell 32" radial drill press. The spindle pulley is being sold separately. They are in excellent condition with no cracks, chip or rust. Email me if you have any questions. If you buy more than one part I will combine the shipping if it is at all possible. Shipping everything in USPS flat rate boxes. Make an offer-all I can do is say no.
Buy It Now
Condition: For parts or not working Location: Coffeyville, United States FLOOR RADIAL DRILL PRESS. MISSING SPINDLE AND SWITCHES. SINGLE PHASE. PARTS ONLY .
Buy It Now
Condition: Used Location: Wichita, United States Tombstone Mounted Table. 440V, 3 Phase, Standard 68"x 42" Slotted Table. 1200 RPM Max Spindle Speed.
Buy It Now
$30.00 Shipping Condition: New Location: Minooka, United States Radial Bench Drill Press,1/2 hp,120V AC 40PM15. This drill press is equipped to handle 3/8" steel and 5/8" cast iron. HOBART S305412-G34 MIG Welding Wire,Carbon ... moreSteel,33 lb. 54JK75 HOBART S305412-G3.
Buy It Now
Condition: Used Location: Toledo, United States TRAVEL OF HEAD ON ARM. TRAVEL OF ARM ON COLUMN. 28-1/2". DISTANCE SPINDLE TO BASE. 26" MINIMUM, 54" MAXIMUM. SPINDLE SPEEDS. (12) 80 TO 1500 RPM. WORKING ... moreAREA OF BASE.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States Included: 1 x main revolving handwheel, 1 x handle grip (knob). Caution-Set screws are not included. expected to last for up to 40 years when using correctly. ... moreNo more turning the shaft with a spanner to use a broken crank and handle.
Buy It Now
Condition: Used Location: Toledo, United States Arm Length 3'. Base Working Surface, W x L 23" x 37". Spindle-Nose to Base, Minimum 11.5". Spindle-Nose to Base, Maximum 43". Base Height 6.25". Plain ... moreType Base. Coolant System (Built-In Base). (9) Spindle Speeds, Range 50 to 1500 RPM.
Buy It Now
Condition: Used Location: Euclid, United States THIS AUCTION IS FOR A NICE USED TOMINAGA YMZ TRE-1700D RADIAL ARM DRILL. 5' ARM 17" COLUMN DIAMETER, 15 HP SPINDLE,5MT, BOX CUBE,POWER ELEVATION& ... moreCLAMPING LOCKS. DRILL IS IN GOOD WORKING CONDITION! $$$PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE.$$$ SPECIFICATIONS: MODEL: TRE-1700D S/N 80111 MACHINING CAPACITY: DRILLING. SOLID STEEL. 3 3/4" DRILLING. CAST IRON. 4 1/2" BORING. SOLID STEEL. 10 5/8" BORING. CAST IRON. 13 3/8" SPINDLE: DIAMETER OF SPINDLE& QUILL. 4 1/2" VERTICAL TRAVEL. 19 5/8" MORSE TAPER. 5 SPINDLE SPEED(24) 21- 1800 RPM FEEDS(24) 0.0015- 0.125 IPR TAP LEADS. 8. 11 1/2, 14, 18, 27 TPI DIMENSIONS: COLUMN DIAMETER. 17 3/4" MAX. DISTANCE COLUMN SURFACE TO SPINDLE CENTER. 67 1/16" MIN. DISTANCE COLUMN SURFACE TO SPINDLE CENTER. 16 1/8" HORIZONTAL TRAVEL OF SPINDLE HEAD. 51 9/16" MAX. DISTANCE. BASE TO SPINDLE. 68 7/8" MIN. DISTANCE. BASE TO SPINDLE. 17 3/4" VERTICAL TRAVEL OF ARM. 32 9/32" MAX. HEIGHT FLOOR TO TOP OF COLUMN. 108 1/4" BASE SIZE. 104 5/16" X 39 1/4" X 9 5/8" MAX. HEIGHT. FLOOR TO TOP OF HEAD. 128 1/4" MOTORS: SPINDLE DRIVE. 15 HP ARM ELEVATION. 5 HP CLAMPING. 1 HP COOLANT PUMP. 100 W APPROX. WEIGHT. 13.860 LBS EQUIPPED WITH: BOX TABLE 30"L X 20"W X 18"W. $$$PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS.$$$(PLEASE CHECKOUT THE OTHER ITEMS FORSALE) I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. YOU CAN PICK UP FOR FREE OR BIDDER CAN ARRANGE S
Buy It Now
Free Shipping Condition: Used Location: Louisville, United States
Buy It Now
Condition: Used Location: Lexington, United States In good condition.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 04240470007. Model Number: DSR 750S. Manufacturer: KBC. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads ... moreor partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Louisville, United States JOHANSSON Toolroom Drill Press With Adjustable Radial Arm. Adjustable Radial arm with 24” travel. Power Feed Head Travel w/Reuland 1/2 HP motor. 360” ... moreRotation of arm. Front table size 26” X 48” T-Slotted Table.
Buy It Now
$13.60 Shipping Condition: Used Location: Mineral Ridge, United States Readi-Press Radial Drill Press JC Jimkraft Tools. Good Used Condition What you see in the pictures is Everything That is Included!!
Buy It Now
Condition: Used Location: Lenapah, United States ARM WILL NOT GO UP AND DOWN. MOTOR AND SHAFT TURN BUT NOTHING HAPPENS. All products are as is.
Buy It Now
Condition: Used Location: Coffeyville, United States Approximate weight: 10,000 lbs. SUPER SERVICE RADIAL ARM DRILL. 13" COLUMN WIDTH, 4' ARM LENGTH. S/N 3E-711.
Buy It Now
Condition: Used Location: Brookpark, United States We have a loading dock and fork lifts with the ability to load any type of truck. we can either use your account number or provide a rate quote. -- 220V, ... more3PHASE. We can provide freight quotes.
Buy It Now
Condition: Used Location: Lancaster, United States Power Clamping of Head on Arm and Arm on Column. Traverse of Arm on Column: 31-1/2". Minimum Distance Spindle to Column: 10-1/2". Traverse of Head on ... moreArm: 36-3/8". Drilling Capacity: 1-3/4" Mild Steel, 2-1/8" Cast Iron.
Buy It Now
Condition: Used Location: Guilford, United States Make: Tsugami Model: M08SY-II Condition: Used, Overall in Great Shape, ready for use Very Nice Machine, Dont Sleep on this deal! -Six Programmable Axes ... more(X1, Y1, Z1, A1, Cmain and Cback) -Integral spindle motors on main and subspindles for minimal vibration and fast cutting.
Buy It Now
Condition: Used Location: Simpsonville, United States Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 3' Arm 9" Col Dia Ikeda RMS-9 RADIAL DRILL. 3 HP,4MT, Box Tbl,Power Elevation Ref# 151535 iammdna XDRLRA 3' X 9" IKEDA RADIAL DRILL MODEL: RMS-9. S/N: 78289, NEW: 1978 SPECIFICATIONS: COLUMN DIAMETER. 9-1/2" MAXIMUM SPINDLE TO COLUMN. 36" MINIMUM SPINDLE TO COLUMN. 11-3/4" MAXIMUM DISTANCE SPINDLE TO BASE. 43" MINIMUM DISTANCE SPINDLE TO BASE. 11-1/2" STROKE OF SPINDLE. 9" SPINDLE SPEED RANGE(9) 50- 1500 RPM SPINDLE TAPER. NO. 4 MORSE SPINDLE FEEDS(4) 003. 006, 010& 015 IPR DRILLING CAPACITY: IN STEEL. 1-1/2" IN CAST IRON. 2" TAPPING CAPACITY: IN STEEL. 1" IN CAST IRON. 1-1/8" BORING CAPACITY: IN STEEL. 3-1/8" IN CAST IRON. 4" WORKING SURFACE OF BASE. 23" X 37" APPROXIMATE MACHINE WEIGHT. 3800 LBS. APPROXIMATE DIMENSIONS. 28"W x 61"L x 85"H. HEIGHT WITH RISER. 97"H EQUIPPED WITH: POWER ELEVATION T-SLOTTED BASE T-SLOTTED BOX TABLE. 12" RISER BLOCK COOLANT SYSTEM. 3 HORSE POWER 208/220/440v SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: SUPERB* Machine Location: HARRISON. NJ Click Here For More Ikeda Machines Click Here For M
Buy It Now
Condition: Used Location: Toledo, United States MODEL. 3A. TAP LEADS. . 8 - 11-1/2 - 14 - 18 TPI. HEAD CLAMP. . MANUAL. MAX SPINDLE NOSE TO BASE. 60". AREA OF BASE. . MIN SPINDLE NOSE TO BASE. 10-1/2".
Buy It Now
$89.50 Shipping Condition: Used Location: Bentley, United States Carlton 6 ft x 19" Column Radial Drill. Weight 27,700 for main machine, and Extra "L" Base 3500 lbs. Serial number 4A 3009. FOB Bentley, LA, venue for ... moreall matters in this sale.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. DISTANCE SPINDLE TO COLUMN. 13-1/4" TO 60". DISTANCE SPINDLE TO BASE. 8-1/2" TO 60". SPINDLE SPEEDS. 20 TO 1600 RPM. SPINDLE TRAVEL. ... more12".
Buy It Now
Condition: Used Location: Canada FM 850 8" X 3' RADIAL ARM DRILL. Total Arm Length: 37.4". Vertical travel of arm: 23.62". Condition Used. Other Specifications. Weight 2500.00 lbs.
Buy It Now
Free Shipping Condition: New Location: Bristol, United States MANUFACTURER SANDVIK COROMANT. 2S342-1905-076CMA 1740. Grade(GRADE) 1740. Substrate(SUBSTRATE) HC. Peripheral effective cutting edge count(ZEFP) 4. Material ... moreclassification level 1(TMC1ISO) M S. PART NUMBER.
|
|
|
|
Toolmex 2K522 Radial Drill 20064
in titles& description Name: Toolmex 2K522 Radial Drill, Ticket# 20064, Model: 2K522, Size: 3 ft. Manufacturer: Toolmex, Item located at: Morrisville. PA, Serial# 171, Condition: Used, Terms& Condition: As is where is, Description: Toolmex Radial Drill Model: 2K522 SN: 171 440 V 60 Hz Has pinched wire(see photos) Information from the manufacturer: 3 foot Arm Radial Drill Swivel column +/ 180 degrees Swivel head on arm +45 degrees-150 degrees Swivel arm(horizontal plane) +/ 90 degrees 12 Speeds 45-2000 RPM 1-1/4 inch Drilling Capacity in steel Independent cooling system 10 inch spindle travel(MT4) Machine Weight: 2.500 lbs. 2 HP 7.1 inch Column Spec Sheet can be emailed upon request. Ticket: 20064 | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery ... moreMoving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
5'15" GIDDINGS & LEWIS/BICKFORD "CHIPMASTER" RADIAL DRILL - #26685
QUOTE# 26685. 5'15" GIDDINGS& LEWIS/BICKFORD"CHIPMASTER" RADIAL DRILL New 1980. Serial No 954-00250-79, Model Chipmaster EQUIPPED WITH: Tapping Capabilities(2) 28.5" x 49" x 18.5" Slotted Tables Right Angle"L"Type Base- Power Arm Elevation Power Clamping to Head- Inch/Metric Dials Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Arm Length. 5' Column Diameter. 15" Horizontal Head Travel on Arm. 48.38" Vertical Arm Travel on Column. 35.5" Vertical Spindle Travel in Head. 20" Spindle-Radius. Minimum. 22" Spindle-Radius. Maximum. 70.38" Spindle-Nose to Base. Minimum. 12.5" Spindle-Nose to Base. Maximum. 66" Base Working Surface. W x L. 39" x 71" Spindle Nose Diameter. 7.125" Spindle Taper. 5 MT. 36) Spindle Speeds. Range. 12 to 1500 RPM. ... more18) Spindle Feeds. Range. 004 to.125 IPR. 6) Tapping Leads. Range. 8 to 27 TPI. Motor Horsepower. 20 HP/1800 RPM. Electrical System. 230-460/3/60. Floor Space Required. W x D. 12'3" x 17'2" Weight. Approximately. 19000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $17.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
DoAll DJR-28 Geared Head Radial Drill - Capacity 1.25" Steel & 1.5" Cast Iron
DoAll Geared Head Radial Drill Model DJR-28. S# 2-92-12, Drill capacity 1.25" Steel& 1.5" Cast Iron, Center of spindle to column 22"max 11"min, 360 ° Rotation. Up to 3/4" capacity tap in low carbon mild steel, Spindle taper 4MT, Quill travel 6 11/16" Adjustable depth stop from 0 to 6" 3 Power down feed ranges.010" 015" 022" 12 Spindle speeds from 80 to 2,300 rpm, 21" x 30.5" T slotted table, Air requirements 90 PSI, Built in coolant system in base, 1.9hp 208v 3ph, Overall Dim. 3' 4"W x 4'FB x 6' 8"H, Est. Wt. 1,250 lbs. Cleaned& painted. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility ... morein Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Bickford 19” Radial Arm Drill w/ Right Angle,Knee Table 14025
in titles& description Name: Bickford 19” Radial Arm Drill w/ Right Angle.Knee Table, Ticket# 14025, Size: 19" Manufacturer: Bickford, Item located at: Morrisville. PA, Serial# 6NE105, Year: 1959, Condition: Used, Terms& Condition: As is where is, Selling Price: $7950.00 Description: Normal 0 false false false EN-US X-NONE X-NONE Bickford 19” Radial Arm Drill with Right Angle. Knee Table and Vise 1959. Spindle Speeds: 18-2300. 19” Column. 480v. 10-8”H. Overall Weight: 29.180. Ticket: 14025-10427 Additional information will be posted as it becomes available. PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Subject To Prior Sale. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers ... morePlace Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
WILLIS-BERGO Model FS 870, 3' x 8" Radial Drill, w/ Power Elev, Box Table, 3 HP
Now available for your inspection and purchase at our JV Partners Warehouse in Cincinnati. OH is this Willis Bergo. Model FS 870, 3' X 8" Radial Drilling Machine with 3 HP Spindle and Power Elevation. We purchased this machine from a local Tool and Die Shop who's owner retired. He took very good care of his equipment. Specifications: Manufacturer: Willis-Bergo MODEL: FS 870 SERIAL NUMBER: GENERAL SPECIFICATIONS Column Diameter: 8-3/4" Maximum Distance Spindle To Column: 34-1/2" Minimum Distance Spindle To Column: 10-1/4" Head Travel On Arm: 24" Maximum Distance Spindle To Bed: 42-1/8" Minimum Distance Spindle To Bed: 11" Vertical Movement Of Arm: 22" Spindle Taper: No. 4 M.T. Spindle Travel: 9" Spindle Speeds: 12) 65- 1200 RPM Feeds: 3) 002. 004, 008 Drilling Capacity. Steel: 1-3/8" ... moreDrilling Capacity. Cast Iron: 1-1/2" EQUIPPED WITH 3 HP Spindle Motor. 220/60/3.9 HP Elevation Motor Coolant Pump Box Table. 13-3/4" x 20" x 13-3/4"H Approximate Weight: 2650 Lbs. F.O.B. Cincinnati. Ohio We know the new owner of this Willis Bergo Radial Drilling Machine will be very. Very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. Skidding fee. If you require it is $147.00 on this item. A full crate is $425.00. Those are the prices we have to pay. We make no profit off of skidding or crating. If you contract with a flatbed or step deck hauler. Neither skidding nor crating is necessary. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satis
|
|
|
CASER RADIAL ARM DRILL
CASER Model F40 RADIAL ARM DRILL 11" Column; 40" Arm Call Gil at 812-499-7998 for more information
|
|
|
OOYA RADIAL DRILL
YEAR: 1977 MODEL: RE1300A MACHINE# 0A7-1762 MACHINING CAPACITY: DRILLING SOLID STEEL: 2” 50MM) DRILLING CAST IRON: 2-3/8” 60MM) BORING IN STEEL: 4” 100MM) BORING IN CAST IRON: 7-1/8” 180MM) SPINDLE: DIAMETER OF SPINDLE: 2-3/8. 3-1/16, 60/78) VERTICAL TRAVEL: 11-13/16(300) MORSE TAPER: NO. 5 SPEED RPM(12 SPEEDS) 50HZ: 32-1.655 60HZ: 38-1.985 FEEDS(6 FEEDS) 0.0032-0.04 IN. 0.08-1 MM DIMENSIONS: COLUMN DIAMETER: 13-3/8” 340MM) MAX DISTANCE. COLUMN SURFACE TO SPINDLE CENTER: 53-34” 1,365MM) MIN DISTANCE. COLUMN SURFACE TO SPINDLE CENTER: 13-3/4” 350MM) HORIZONTL TRAVEL OF SPINDLE HEAD: 39-7/8. 1,015) MAX DISTANCE BASE TO SPINDLE: 51-1/8” 1,300MM) MIN DISTANCE BASE TO SPINDLE: 14-3/4” 375MM) VERTICAL TRAVEL OF ARM: 24-5/8” 625MM) MAX HEIGHT(FLOOR TO TOP OF COLUMN) 92” 2,337MM) BASE SIZE(GXHXL) 82-1/4X33-1/2X7-1/2”2.090X850X190) MOTORS: SPINDLE ... moreDRIVE: 3.7KW ARM ELEVATION: 1.4KW CLAMPING: 04KW COOLANT PUMP: 40W NET WEIGHT(APPROX) 6.610LB, 3.000KG BUYING AS IS. NO WARRANTY STATED NOR IMPLIED MACHINE CHECKED OUT& IS IN WORKING CONDITION PLEASE READ BEFORE BIDDING. MAKING AN OFFER OR PURCHASING: THE SHIPPING/HANDLING COSTS WILL BE THE RESPONSIBILITY OF BUYER. THIS WILL INCLUDE A FEE TO PALLETIZE AND WRAP ITEM AS WELL AND TO USE A FORKLIFT FOR LOADING. PLEASE NOTE WE ARE NOT EXPERTS IN THE PARTS. MACHINES OR RELATED FIELDS AND MAY NOT BE ABLE TO GIVE THE ANSWERS REQUIRED. WE WILL HOWEVER DO OUR BEST TO FIND THE INFORMATION REQUESTED CONTACT US FOR ANY QUESTIONS OR CONCERNS THANK YOU FOR THE INTEREST IN OUR ITEMS. WE ALWAYS APPRECIATE THE BUSINESS OPPORTUNITIES. IF YOU DO NOT SEE ANYTHING ON A SEARCH PLEASE CHECK OUR STORE FOR MORE SUPPLIES
|
|
|
USED IKEDA 4.5' X 13" RM1300 RADIAL ARM DRILL #5M.T. POWER ELEVATION
Used 4.5’ x 13” IKEDA RADIAL ARM DRILL MODEL: RM1300 ♦ YEAR:1978 Specifications Capacity: Steel Iron Drilling: 2-1/4” 2-5/8” Tapping: 1-3/4” 2” Boring: 4” 6” Column Diameter: 13-5/8” Arm Length: 54-1/2” Face of Column to Center of Spindle: 9” min. 52-5/8” max. Spindle to Base: 15-1/4” min. 56-3/4” max. Working Surface of Base: 57-1/4” x 36” Height of Base: 8-1/2” Vertical Travel of Spindle in Head: 12” Spindle Diameter(driving dia. 3-5/8” Morse Taper in Spindle: 5 Traverse of Head on Arm: 47” Feed and Tap Leads: 4) 0.004” 0.021” rev Spindle Speeds: 12) 30-1.440 rpm Drive Motor: 5 HP Dimensions: 82” x 36” x 96” Weight of machine(less motor) 7.700 lbs. Equipped with: ¨ Power elevation ¨ Power clamping ¨ Coolant We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact ... moreus. 800 899 8182 ext. 208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately
|
|
|
Drill Radial Arm Drill 5' x 13" WMW Model BR60-1600-GH (2001)
5' x 13" WMW Model BR60-1600-GH 5' x 13" Radial Arm Drill(2001) Specifications Cross Travel Of Head On Arm: 60" Column Diameter: 13.0" Vertical Travel Of Arm On Column: 30" Feeds: 0015"025" Quill Dia: 4" Quill Travel: 12.4" Main Drive Motor: 5.4 HP, Spindle Speed Range: 36-1600 RPM, Equipped With: Power Elevation. Power Clamping, Power Rapid Traverse, Machine being sold As Is. Where is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
7'17" AMERICAN "HOLEWIZARD" RADIAL DRILL - #26676
Quote#26676 7'17" AMERICAN"HOLEWIZARD" RADIAL DRILL New 1955. Serial No 74492, Series"HOLEWIZARD" EQUIPPED WITH: Tapping Capabilities Power Arm Elevation Power Clamping to Column& Head Power Rapid Traverse to Head 12" Riser Block(Removeable) 90" x 156" T-Slotted Floor Plate(Used As Base) CATALOGUE SPECIFICATIONS: Arm Length. 7' Column Diameter. 17" Horizontal Head Travel on Arm. 70" Vertical Arm Travel on Column. 43.5" Vertical Spindle Travel in Head. 18" Spindle-Nose to Base. Minimum. 10.5" Spindle-Nose to Base. Maximum. 72" Spindle Nose Diameter. 3.25" Spindle Taper. 5(32) Spindle Speeds. Range. 15 to 1500 RPM(16) Spindle Feeds. Range. 003 to.125 IPR(4) Tapping Leads. Range. 8 to 18 TPI Main Motor. Horsepower. 25 HP/1770 RPM Electrical System. 220-440/3/60 ... moreWeight. Approximately. 24000 LBS PRICE: F.O.B. OUR WAREHOUSE. $22.500.00. Machine/Equipment Subject to Prior Sale. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e80df2952-0x105-
|
|
|
TWS TRANS WORLD STEEL INC MODEL RD-110S RADIAL DRILL
TWS TRANS WORLD STEEL INC MODEL RD-110S RADIAL DRILL TWS TRANS WORLD STEEL INC MODEL RD-110S RADIAL DRILL DATE: 1982-11 OUTPUT: 6-1/8 HP SERIAL NO: 11157 SPINDLE SPEEDS: 50-1511 FEEDS 0.012" 0.002" 0.008" 0.004" 60 HZ 230/ 460 VOLTS RPM: 1.730 PHASE: 3 7" SPINDLE TRAVEL 4 POLE TABLE SIZE: 23" x 45" ANGLE PLATE: 27.5" x 15.5" x 15" 12" MIN THROAT 40" APPROXIMATE MAX THROAT 25" HEIGHT ADJUSTMENT PLEASE CALL FOR WEIGHT LOADING FEE: $25 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. ... moreDomestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools a
|
|
|
6'15" GIDDINGS & LEWIS/BICKFORD "CHIPMASTER RADIAL DRILL - #26744
QUOTE# 26744. 6'15" GIDDINGS& LEWIS/BICKFORD"CHIPMASTER" RADIAL DRILL New 1968. Serial No 962-00025-68, Model Chipmaster. Type 962 EQUIPPED WITH: Tapping Capabilities Plain Base- Power Arm Elevation Power Clamping to Head Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Arm Length. 6' Column Diameter. 15" Horizontal Head Travel on Arm. 60.38" Vertical Arm Travel on Column. 36" Vertical Spindle Travel in Head. 14" Spindle-Radius. Minimum. 25" Spindle-Radius. Maximum. 83" Spindle-Nose to Base. Minimum. 18" Spindle-Nose to Base. Maximum. 67" Base Working Surface. W x L. 42" x 83" Spindle Nose Diameter. 3.94" Spindle Taper. 5 MT(12) Spindle Speeds. Range. 40 to 1600 RPM(9) Spindle Feeds. Range. 002 to.040 IPR Motor Horsepower. 10 HP/1800 RPM Electrical System. ... more230-460/3/60 Floor Space Required. W x D. 13'3" x 19'2" Overall Height. 9'3" Weight. Approximately. 17600 LBS PRICE: F.O.B. OUR WAREHOUSE. $14.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
RV-1096 FOSDICK 4FT SENSITIVE RADIAL DRILL 3HP
Description Up for sale is a ERC inventory number RV-1096. FOSDICK 4FT SENSITIVE RADIAL DRILL 3HP 230/460V. 3PH BED: 42" X 21" 43" FROM BASE TO CHUCK 6260LBS 8' X 4' X 8' FOR SHIPPING DUE TO SIZE AND WEIGHT. THIS ITEM MUST SHIP VIA COMMON CARRIER OR FLATBED. PLEASE EMAIL WITH ZIP CODE FOR FREIGHT QUOTE Condition of Item This item is in used condition. This item/lot is being offered“AS IS” with no written. Implied or expressed warranty nor other guarantee as to its condition or fitness for use. Unless otherwise stated(see known deficiencies) the condition of this item/lot(or it’s fitness for any use/purpose) is unknown. Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine ... moreshipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.172.0
|
|
|
HEAVY DUTY TILT & SWIVEL BOX TABLE FOR RADIAL ARM DRILL
aims HEAVY DUTY TILT& SWIVEL BOX TABLE FOR RADIAL ARM DRILL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Heavy Duty Tilt& Swivel Box Table for a Radial Arm Drill in good condition. Specifications: Top Surface Area: 24" x 18-1/2" Side Surface Area: 24" x 12-1/4" Top T-Slots: 3@ 6" 13/16" wide) Side T-Slots: 2@ 5" 13/16" wide) Tilting Range: 90 degrees. Swivel: 360 degrees. Overall Dimensions: 24" x 25" x 23-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar ... morewith no reserve. HEAVY DUTY TILT& SWIVEL BOX TABLE FOR RADIAL ARM DRILL HEAVY DUTY TILT& SWIVEL BOX TABLE FOR RADIAL ARM DRILL HEAVY DUTY TILT& SWIVEL BOX TABLE FOR RADIAL ARM DRILL Reliable Tool Inc. c 2011 | Powered by
|
|
|
1992 Ooya Model RE-1225 4'X12" Radial Drill w/5HP Main Motor and Power Elevation
New in 1992! Now available for your immediate inspection and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this Ooya Model RE-1225. 4" X 12" Radial Drill, S/N OA-1411 with 5HP Main Motor and Power Elevation. Manufactured New in 1992. Specifications for this machine are as follows: Diameter of Column: 12-5/8" Maximum Distance. Column Surface To Spindle Center: 49-3/8" Minimum Distance. Column Surface To Spindle Center: 11-5/8" Spindle Speeds: 24) 32 to 1985 RPM Feeds: 6) 0032 to.04 Spindle Taper: No. 5 M.T. Diameter Of Spindle: 2-3/8" Diameter Of Quill: 3-1/16" Vertical Travel of Spindle: 11-13/16" Horizontal Travel of Spindle Head: 37-3/4" Maximum Distance. Base To Spindle: 51-3/4" Minimum Distance. Base To Spindle: 13" Vertical Travel Of Arm: 25-5/8" Drilling. ... moreSolid Steel: 2-1/4" Drilling. Cast Iron: 2-5/8" EQUIPPED WITH 5 HP Drive Motor Power Elevation Spindle Forward/Reverse Switch Box Table Approximate Weight: 6100 Lbs. You can see this very nice machine tool under power at our Warehouse in Beautiful Downtown Miamisburg. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Ooya Model RE-1225 Radial Drill. Built with a whole lot of quality in the Japan. Overall. A"Great Operating. Good Looking" Radial Drill that is ready to go to work. The appearance speaks for itself(see photo's) If you need a good late model Radial Drill of this size. Don't pass up this opportunity. Y ou will have no regrets if you buy this machine. We believe the new owner of this Ooya Radial Drill will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been
|
|
|
Town AE4 Radial Arm Drill 11 x 36 22736
in titles& description Name: Town AE4 Radial Arm Drill 11 x 36, Ticket# 22736, Model: AE4, Size: 11" Column. 36" Travel, Manufacturer: Town, Item located at: Morrisville. PA, Serial# 8917, Condition: Used, Terms& Condition: As is where is, Selling Price: $4000.00 Description: Town AE4 Radial Arm Drill 11 x 36 with table. Broken Handle(refer to photo) 220 V, 3 Ph, Manufacturer's specs can be emailed upon request. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
*NO RESERVE* _ 6' x 19" Carlton Radial Drill Drilling Machine
PLEASE NOTE: Inspection encouraged as there is no 30 day return on this item! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on an Older 6' x 19" Carlton Radial Drill. Can be inspected under power. Email for more details and PHOTOS! Please check out our Feedback, we are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. We are currently getting exact cost. But estimate is $1300 +. OUR RETURN POLICY. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
WILLIS BERGO MODEL TM50 RADIAL DRILL PRESS 35-1620 RPM SPINDLE SPEED
WILLIS BERGO MODEL TM50 RADIAL DRILL PRESS 35-1620 RPM SPINDLE SPEED Click Images to Enlarge WILLIS BERGO MODEL TM50 RADIAL DRILL PRESS 35-1620 RPM SPINDLE SPEED MADE IN ITALY 240 VOLTS WITH COOLANT PUMP JACOBS 20mm CAPACITY CHUCK TABLE: 63" x 28" ANGLE PLATE: 17-3/4" x 25-3/4" x 17-3/4" TALL 13" COLUMN DIAMETER 11.5" SPINDLE TRAVEL 5 HP MOTOR ARM TRAVEL: 50" MEASURES: 93" x 40" x 99" TALL WEIGHT: 5.900 LBS LOADING FEE: $25 WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges ... moreon the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport.
|
|
|
Summit 4' x 12" Radial Arm Drill Press w/Box Table - 5HP/3PH
SKU: 2214269 A: 0013000000CXCfg O: 0065000000IPj6q PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Summit 4' x 12" Radial Arm Drill Press w/Box Table- 5HP/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property in Kent. Washington. Rigging charges for professional removal will ... moreapply. Please see details below. Overview: Make: Summit Model: Unknown Type: Radial Arm Drill Serial No: Unknown Origin: Made in Italy Features/Specifications: Machine Size: 4' x 12" Arm Length: 48" Column Diameter: 12" Drill Diameter Range: 1/8" 2-9/16" Spindle Taper: 5MT(Jacobs Super Chuck No. 20N) Spindle Speed Range: 30-2200 RPM, Pellizzari Spindle Motor: 5 HP- 440V- 9.0/7.7A, 3400/1700 RPM- 60 Hz- 3 PH, Box Table Size: 22-3/4" x 32-1/4" 15-3/4" side) Includes 6" Bridgeport vise(as shown) Dimensions& Weight: L 80" x W 36" x H 103" Shipping Weight: 7.500 lbs(estimated) Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular maintenance performed by previous owner Rigging& Removal: This equipment is sold"as shown" at a production facility owned by The Boeing Company in Kent. Washington. The successful bidder will be required to have the equipment removed from Boeing property by October. 24th, 2013. The high bidder is responsible for removal. Shipping, and transportation costs. Only Boeing approved riggers will be allowed t
|
|
|
1978 Carlton Model 1A 4' X 9" Radial Drill w/ 5HP Main Motor and Power Elevation
New in 1986! Now available for your immediate inspection and purchase at our JV Partners warehouse in Cincinnati. OH is this"Beautiful" Carlton Model 1A. 4" X 9" Radial Drill, S/N 1A-1214 with 5HP Main Motor and Power Elevation. Manufactured New in 1978. Specifications for this machine are as follows: Arm Length: 4' Column Diameter: 9" Spindle Speeds: 9) 100 to 2000 RPM Feeds: 4) 004 to.025 Face of Column to Center of Spindle: 4' Max. 9" Min. Maximum Spindle Radius: 4'7" Mimimum Spindle Radius: 16" Maximum Spindle to Base: 4'5" Minimum Spindle to Base: 14" Vertical Travel of Spindle in Head: 12" Morse Taper in Spindle: No. 4 Spindle Diameter: 2-1/2" Traverse of Arm on Column: 2'3" Traverse of Head on Arm: 3'3" Drills to Center of Circle: 8' Swing ... moreof Arm: 64" EQUIPPED WITH 5 HP Drive Motor Power Elevation Spindle Forward/Reverse Switch Box Table Approximate Weight: 5600 Lbs. You can see this very nice machine tool under power at our JV Partners Warehouse in Cincinnati. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Carlton Model 1A Radial Drill. Built with a whole lot of quality in the USA. Overall. A"Great Operating. Great Looking" Radial Drill that is ready to go to work. The appearance speaks for itself(see photo's) If you need a good late model Radial Drill of this size. Don't pass up this opportunity. Y ou will have no regrets if you buy this machine. We believe the new owner of this Carlton Radial Drill will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care t
|
|
|
Delta Rockwell Ram-Type Radial Drill Press 15-120 Variable Speed 115V/1PH
SKU: 2316767 A: 0013000000CXCfg O: 0065000000OyDhL PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Delta Rockwell Ram-Type Radial Drill Press 15-120 Variable Speed 115V/1PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Delta Rockwell Model: 15-120 Type: Ram-Type Radial Drill Serial No: 1412293 Features/Specifications: ... moreMax. Swing: 60" Max. Throat: 30" Variable Speed: 175-1450 RPM 365-2800 RPM 600-4750 RPM 1030-8200 RPM Rockwell Motor: 1/2 HP- 115/230V- 7.8/3.9A 1725 RPM- 60 Hz- 1 PH Table Size: 18" x 26" Jacobs 633C/33 taper Dimensions& Weight: Dimensions: L 44" x W 31" x H 48" as shown) Shipping Weight: 560 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in a working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video
|
|
|
ARBOGA RADIAL DRILL SERIE 212480
ARBOGA RADIAL DRILL SERIE 212480* THIS IS A NO RESERVE AUCTION. MACHINE WILL BE SOLD TO THE HIGHEST BIDDER* WE WILL LOAD THE MACHINE ON YOUR TRUCK AT NO EXTRA COST. TRUCK MUST BE A OPEN TRAILER) PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T ... moreFORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
|
|
|
ZJ-RADIAL DRILL S/N 50850600 60" ARM
ZJ-RADIAL DRILL S/N 50850600 60" ARM* THIS IS A NO RESERVE AUCTION. MACHINE WILL BE SOLD TO THE HIGHEST BIDDER* WE WILL LOAD THE MACHINE ON YOUR TRUCK AT NO EXTRA COST. TRUCK MUST BE A OPEN TRAILER) PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER ... moreDON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-143208a843e-0xec-
|
|
|
Fosdick Radial Drill 5ft arm 11inch Column with tilting table
Fosdick Radial Arm Drill 5ft( Video is a available) 5ft arm 11inch cloumn 9 speeds Tilting table Very good condition Just removed from service. Buyer is responsible for all freight and rigging costs. We will load the machine at no cost to buyer. machine is sold as-is where is. if you have any questons feel free to call Tom at 319-360-6490 machine is located in Cedar Rapids Iowa
|
|
|
CINCINNATI BICKFORD #6 MORSE TAPER SUPER SERVICE RADIAL DRILL PRESS
CINCINNATI BICKFORD SUPER SERVICE RADIAL DRILL PRESS Brown& Zortman Machinery Co. Pittsburgh. Pa"HIGH MACHINERY GRADE" Cincinnati Bickford Tool Company Oakley Cincinnati. Oh USA This press is in good working condition and everything works as it should other than the clamp is inoperable. We used this machine for a few jobs here in our shop and it has been sitting ever since. We blocked the rail for storage purposes. MOTOR SPECS: Reliance 480v- 3 PHASE HP- 30 RPM- 1765 HZ- 60 S.F. 1.15 Frame-286T Design- 8 Identification#1MLF61346 G1 MT AMB- 040 Deg. C Type- P Volts- 230/460 AMPS- 74.0/37.0 OVERALL MACHINE DIMENSIONS: L- 150" W- 64" H- 138" 4' Vertical Travel 5' Horizontal Travel 2-1/2" 6 Morse Taper Chuck Feed Change Positioner Power Column Clamp(Not Working) Cutting Speed Diagram THE BOX ON THE FRONT ... moreOF THE MACHINE IS FILLED WITH MORSE TAPER TOOLING AND IT WILL SELL WITH THE MACHINE. IF YOU WOULD LIKE MORE INFORMATION ON WHAT TOOLING IS INCLUDED PLEASE FEEL FREE TO CALL US. TERMS& CONDITIONS: If you would like a shipping quote. Please email your postal/zip code and if it's shipping to a business or residential address. Also please let us know if you have a loading dock or forklift to unload. If you have any questions, please call John at 412-823-8890. All questions and/or offers will be responded to during regular business hours Monday-Friday. Shipping and Handling: We ship items Monday-Friday, 7:00 am- 2:30 pm. Buyer pays ALL Shipping& Handling(packaging) fees. Item(s) will ship between 1-5 business days after payment has been received. Shipping cost varies on all items. Please email for exact quotes and include your zip code in all shipping inquiries. Payment in FULL must be received within 7 business days of auction closing, unless prior arrangements have been made. By bidding on an item, you accept the terms noted above. Return Policy ALL SALES ARE FINAL and ALL ITEMS ARE SOLD AS IS. We sell USED equipment. In most cases, we are unable to test the equipmen
|
|
|
FOSDICK 4' x 11" Radial Arm Drill Press
Machine MUST BE sold. Email us for video of machine under power! OR. You are bidding on a FOSDICK 4' x 11" Radial Arm Drill. Machine in Plant- Under Power! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14355ed2b51-0x102-
|
|
|
8' x 19" Carlton Model 4A Radial Arm Drill, S/N 5556 (1970)
5331- Carlton Radial Arm Drill Manufacturer: Carlton Model: 4A S/N: 5556 Year: 1970 Specifications: Arm Length 8' Column Diameter 19" Spindle Speeds(36) 10- 1.000 RPM Spindle Nose#6 MT Spindle Quill Travel 20" Spindle Quill Feeds(18) 0.004" 0.125" Thread Leads 8- 11.5- 14- 18 Spindle Nose To Base 20 1/2" 84" Column Face To Spindle 13 1/4" 96" Travel Of Head On Arm 82" Vertical Arm Travel 37 1/2" Dimensions(L x W x H) 150" x 60" x 150" Weight 30.000 Lbs. Equipped With: Power Elevation Power Head Traverse Power Clamping On Head& Arm Tapping Coolant System Horsepower: 30 Location: Holland. OH BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. ... morePlease call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer u
|
|
|
FOSDICK 4FT SENSITIVE RADIAL ARM DRILL
FOSDICK 4FT SENSITIVE RADIAL DRILL IN PERFECT WORKIGN CONDITION.PULLED FROM A CLEAN DEFENSE CONTRACTOR SHOP.APPROX. 5.000LBS BUYER RESPONSIBLE FOR SHIPPING AND/OR PICK UPWE WILL LOAD TRUCK FOR NO EXTRA CHARGE.
|
|
|
Carlton 5' x 15" Radial Arm Drill
Carlton 5’ x 15” Radial Drill Specifications: Column Diameter 15” Arm Length 5’ Spindle Radius- Max. 5’ 11” Spindle Radius- Min. 26” Spindle to Column- Max. 5’ Spindle to Column- Min. 15” Spindle to Base- Max. 5’6” Spindle to Base- Min. 10 1/2” Working Surface of Base 3’6” x 5’5” Height of Base 8” Vertical Travel of Spindle Head 18” Bearing of Head on Arm 21 7/8” Bearing of Arm on Column 30” Max. Height over Head 10’ 7” Height Over Column Capacity 9’ 11” Spindle Diameter 3 3/16” Morse Taper in Spindle No. 5 Traverse of Arm on Column 3’1 1/2” Traverse of Head on Arm 3’9” Drills to Center of Circle 10 Swing of arm 7’4” Feed and Tap Leads(18) 004” to.125” Spindle Speeds(36) 10-1000 Weight 17.500 lbs. Subject to prior sale. Loading Charge:There will be a loading charge for this drill. Please contact us for more information regarding this. Please ... morecall us at 248-416-3437 or email us at aandbsteel@gmail.com with any questions.
|
|
|
Yoshida Radial Arm Drill 45" x 12" 24006
in titles& description Name: Yoshida Radial Arm Drill 45" x 12" Ticket# 24006, Model: YR5-115, Size: 45" x 12" Manufacturer: Yoshida, Item located at: Morrisville. PA, Serial# 5820001, Condition: Used, Terms& Condition: As is where is, Description: Yoshida Radial Arm Drill Model: YR5-115. SN: 5820001. 4 ft. x 12 in. Table Dims: 25-1/2 in. x 19-1/2 in. x 18 in. H. Includes tooling. MAXIMUM DISTANCE. COLUMN SURFACE TO SPINDLE END: 45-1/4” MINIMUM DISTANCE. COLUMN SURFACE TO SPINDLE END: 11-1/16” MAXIMUM DISTANCE. BASE TOP TO SPINDLE END: 50-13/16” MINIMUM DISTANCE. BASE TOP TO SPINDLE END: 14-15/16” DRILLING CAPACITY IN STEEL: 2” TAPPING CAPACITY IN STEEL: 1-7/8” BORING CAPACITY IN STEEL: 2-3/4” COLUMN DIAMETER: 12-5/8” HORIZONTAL TRAVERSE OF SPINDLE END: 33-7/8” VERTICAL TRAVEL OF ARM: 24-3/8” SPINDLE TAPER: NO. ... more5 MT, SPINDLE SPEEDS(12) 40 TO 1800 RPM, SPINDLE STROKE: 11-3/4” SPINDLE FEEDS(9) 002 TO.040 IPR, SIZE: 7-1/2” X 33-7/8” X 74-13/16” SIZE OF WORKING SURFACE: 27-3/4” X 43-5/16” SIZE OF TABLE: 17-3/4” X 19-11/16” X 25-5/8” MOTOR, SPINDLE DRIVE: 5 HP, ARM ELEVATING: 1.5 HP, CLAMPING: 5 HP, COOLANT PUMP: 1/6 HP, OVERALL DIMENSIONS. APPROX. 7’ L-R X 3’ F-B X 8’5” H, NET WEIGHT: 6.600 LBS, ELECTRICS: 220 VOLTS. 3 PH, 60 CYC, | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
Fosdick 12" x 3 FT Radial Arm Drill w/Newall A50 DRO & Dyna System Control
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2469163 A: 0013000000CXCfg O: 0065000000QrxKx PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Fosdick Machine Tool Co. 12" x 3 FT Radial Arm Drill w/Newall A50 DRO& Dyna System Control. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Fosdick ... moreMachine Tool Co. Size: 12" x 3 FT Type: Radial Arm Drill Serial No: Unknown Features/Specifications: Column Diameter: 12" Arm Length/Max. Throat: 36" Swing: 72" Table Size: 36" x 24" Table Tilt: +/90 deg. Variable Speed: 100-2000 RPM Feeds: 0008/0017/0030/0045 Spindle Motor: 3 HP- 120V- 22A- 1750 RPM- 60Hz- 1PH Base Motor: 1/2 HP- 220/440V- 12/6A- 60Hz- 3 PH Drilling& tapping functionality Dyna System control(w/instruction manual) Newall DRO Coolant system Dimensions& Weight: Machine(as shown) L 68" x W 38" x H 94" Shipping Dimensions: L 78" x W 54" x H 99" Shipping Weight: 5.970 lbs Condition: Good- working at time of decommission Normal to heavier wear from age& previous use in working industrial environment Regular. Thorough maintenance performed by previous owner Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like th
|
|
|
2HP FREJOTH F RD-900 66" RADIAL ARM DRILL 20"x32" TABLE W/ T-SLOTTED PLATE
2HP FREJOTH F RD-900 66" RADIAL ARM DRILL 20"x32" TABLE W/ T-SLOTTED PLATE Click Images to Enlarge 2HP FREJOTH F RD-900 66" RADIAL ARM DRILL 20"x32" TABLE W/ T-SLOTTED PLATE COMES AS SEEN IN PHOTOS ALL THE INFORMATION THAT WE HAVE IS STATED BELOW. MADE BY FREJOTH MODEL F RD900 YEAR 89 NO. 2059 SPEEDS 88RPM- 1500RPM THROAT 33" SWING 66" 8" QUILL TABLE 20"x32" W/ T-SLOTS ANGLE PLATE 16"x13.5" W/ T-SLOTS = 1-1/4" ANGLE PLATE HEIGHT FROM FLOOR 20" 3PH 220/440V 2HP 60Hz 5.6/2.80 AMPS WEIGHT 2.410 LBS $40.00 LOADING FEE OVERALL SIZE 57"x25.5"x74" Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I ... morewill ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or
|
|
|
CINCINNATI BICKFORD 13" x 5' 700 RPM SPINDLE SUPERSAVER RADIAL DRILL
CINCINNATI BICKFORD 13" x 5' 700 RPM SPINDLE SUPERSAVER RADIAL DRILL This is an Auction for a Large Cincinnati Bickford 13' X 5' Supersaver Radial Drill with 700 RPM Spindle- Serial Number 45-264. Includes Box Tooling Plate shown. Under power in a local plant. Made in the USA I will fully guarantee this item. We will load the unit on your truck or assist you with competitive transportation Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
|
4.5' X 13" IKEDA RADIAL DRILL MODEL: RM-1300, 5 HP, #5MT, POWER ELEV & CLAMPING
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 4.5' X 13" IKEDA RADIAL DRILL MODEL: RM-1300. 5 HP, 5MT, POWER ELEV& CLAMPING Ref# 152112 iammdna XDRLRA 4.5' X 13" IKEDA RADIAL DRILL MODEL: RM-1300. S/N: 6745 NEW: 1967 SPECIFICATIONS: ... moreCOLUMN DIAMETER. 13-5/8" CENTER OF SPINDLE TO COLUMN. 53-1/2" MINIMUM COLUMN TO SPINDLE. 10-1/2" MAXIMUM DISTANCE SPINDLE TO BASE. 56" MINIMUM DISTANCE SPINDLE TO BASE. 15" STROKE OF SPINDLE. 1-3/4" SPINDLE SPEED RANGE(12) 30- 1440 RPM SPINDLE TAPER. NO. 5 MORSE SPINDLE FEEDS(4) 004- 021 IPR DRILLING CAPACITY: IN STEEL. 2-1/4" IN CAST IRON. 2-5/8" TAPIING CAPACITY: IN STEEL. 1-3/4" IN CAST IRON. 2" BORING CAPACITY: IN STEEL. 4" IN CAST IRON. 6" WORKING SURFACE OF BASE. 36" X 57" APPROXIMATE MACHINE WEIGHT. 7.700 LBS. APPROXIMATE DIMENSIONS. 36"W x 82"L x 96"H EQUIPPED WITH: POWER ELEVATION POWER CLAMPING. T-SLOTTED BASE UNIVERSAL T-SLOTTED BOX TABLE. COOLANT SYSTEM. 5 HORSE POWER SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Ikeda Machines Click Here For More Drills. Tappers& Jig Borers- RAD
|
|
|
Carlton 4 ft Radial Arm Drill
Carlton Drill-9" Column with 4 ft Arm. SN OA-60, 240 Volt 3 Phase, Includes Manual, Drill Table, Drill Bit Storage Cabinet, and Miscellaneous Drill Bits. See Page from Manual for more detailed information. Buyer must provide his own loading and shipping arrangements.
|
|
|
Fosdick 12" x 30" Radial Arm Drill
Serial:12090. Size: 12" x 30" Speed: 1406 RPM. Equipped With: Power Feed. Power Column. Tooling Riser Block. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
|
|
|
Yang Iron Radial Arm Drill 7" x 18" 23307
in titles& description Name: Yang Iron Radial Arm Drill 7" x 18" Ticket# 23307, Size: 7" Column. 18" Travel, Manufacturer: Yang Iron, Item located at: Morrisville. PA, Serial# 60573, Year: 1978, Condition: Used, Terms& Condition: As is where is, Selling Price: $ Description: 6 Spindle Speeds: 88-1500 RPM Box Table: 16" x 12" x 12 1/2" High Spindle 1 hp. 220/ 440 V, 3 ph The spindle seal leaks. Minimally but does need to be replaced. Overall dims: 42 L-R. 24" Deep, 72" H approx 1,000 lbs | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
RADIAL DRILL 18 INCH X 79 INCHES SELECT MACHINE CO MODEL 7918 RD
NICE RUNNING DRILL.HAS BOX TABLE.RIGID TAPING.SELECT MODEL# 7918 CAN LOAD NO CHARGE.DON-909-641-2144
|
|
|
6'19" CARLTON "4A" RADIAL DRILL - #27051
6'19" CARLTON RADIAL DRILL#27051 Serial No. 4A-3354. Model 4A EQUIPPED WITH: Plain Box Table Tapping- L-Type" Base Power Elevation- Power Clamping Power Head Traverse CATALOGUE SPECIFICATIONS: Arm Length. 6' Column Diameter. 19" Spindle Taper. 6 MT(36) Spindle Speeds. Range. 15 to 1500 RPM(18) Spindle Feeds. Range. 004 to.125 IPR(4) Tapping Leads. Range. 8 to 18 TPI Drills to Center of Circle on Base. 12' Spindle-Nose to Base. Maximum. 6'6" Spindle-Nose to Base. Minimum. 14-1/2" Spindle Radius. Maximum. 7'2" Spindle Radius. Minimum. 2'3" Face of Column to Spindle. Maximum. 6'4-1/2" Face of Column to Spindle. Minimum. 17-1/2" Vertical Spindle Travel in Head. 20" Vertical Arm Travel on Column. 3'7-1/2" Horizontal Head Travel on Arm. 4'10" Working ... moreSurface of Base. L x W. 77" x 50" Motor. Horsepower/RPM. 15 HP/1200 RPM Extreme Height. Column Above Floor. 11'9" Extreme Height. Head& Arm Extended. 12'2" Weight. Approximately. 23,210 LBS PRICE: F.O.B. OUR WAREHOUSE. $17.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
|
Radial Drill, Qualters & Smith
This Machine is in excellent condition. Model E3. 4 MT in spindle 36" Arm
|
|
|
Radial Drill- Cincinnati-Bickford, Size 6'-19"
Model: 6E Arm Size 6' Column Diameter 19" Maximum Height Under Arm 72" Min. Height Under Arm 24" Spindle Speeds 40 To 1.250 Rpm's Spindle Taper# 6 Morse Spindle Travel 20" Spindle Diameter 4" Spindle Feeds.004 To.125 I.P.R. Threads Leads 8.11-1/2,14,18,20,27 Main Motor 20 Hp. 220/ 440 Tilting Box Table 32" X 28" Machine Width& Length 90" X 130" Machine Height 148" Machine Weight 30.000 Lbs. Power Clamp To Column Power Elevation Yes Coolant Yes Rapid Traverse On Head Condition Good Note: Baseplate is equipped with optional side extension to hold Tilting Box Table(included, see picture) Available extras: Assorted large diameter Morse Taper drills 6' X 8' T-Slot Table Work-holder vice Call for inspection appointment: 314-369-6321 M- Sat. 9-5 CST. Or EMAIL: Item will be sold ... moreF.O.B sellers plant loaded on truck of buyer's choice
|
|
|
YMZ/Tominaga TRE-1700D Radial Arm Drill Press 5' x 17" w/Box Table 10" Kurt Vise
SKU: 2364920 A: 0013000000CXCfg O: 0065000000VK4om PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a YMZ/Tominaga TRE-1700D Radial Arm Drill Press 5' x 17" w/Box Table 10" Kurt Vise. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great buying formats to serve you– Bid Now Auctions and Fixed Price Buy Now listings. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles, industrial machine tools, general rental tools and other heavy equipment. View our Fixed Price store- also featuring construction machinery. Fleet vehicles& other industrial equipment in a convenient Buy It ... moreNow(or Best Offer) format. Bid with confidence- 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Request Freight Estimate button above. Overview: Make: YMZ/Tominaga(Yamazen) Model: TRE-1700D Type: Radial Arm Drill Press Serial No: 82250 Features/Specifications: Arm Length: 5' Column Diameter: 17" Spindle Speeds: 20- 2.000 rpm(24-pos. Feeds: 0.0165- 18.0 ipr(high) 0.0015- 0.0126 ipr(low) Spindle Motor: 15 HP(11 kW) Electrical: 480V- 60 Hz- 3 HP Joystick up/down control Box table(30" x 20" x 18" Jacobs Super Chuck 18N/4J Kurt D100 10" vise w/handle Coolant pump Dimensions& Weight: Machine Dimensions: L 108" x W 48" x H 110" Shipping Weight: 14.000 lbs(estimated) Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular maintenance performed by previous owner Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are no
|
|
 |