|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$16.40 Shipping Condition: Used Location: Orefield, United States Taco Model HR-3 Reversible Tapping Attachment Head with 1 collett.Capacity: 8-20mm and wrench is included. Couple small scratches on it but has never ... morebeen used. Money back guaranteed! Buy it now because it will be gone fast.
Buy It Now
$10.00 Shipping Condition: Used Location: Fairfield, United States CONDITION: GOOD USED.
Buy It Now
Free Shipping Condition: New Location: Shelton, United States never used
Buy It Now
$23.06 Shipping Condition: New – Open box Location: Cleveland, United States We do not accept responsibility on the correct application or installation of this item. This item should be installed and maintained by qualified individuals.
Buy It Now
Free Shipping Condition: For parts or not working Location: Maricopa, United States Used- Tapmatic NCR-1A tapping unit. This item is in good used condition. Includes only what's shown in picture. Unit moves smooth. FREE SHIPPING! ... morePlease make sure this is what you need prior to bidding. Don't miss out. Check out my other auctions for more great deals from JSF Industrial! Washington state residents add 9.5% sales tax. Buyer must verify their address prior to bidding. If your package is returned due to faulty address. Then buyer agrees to pay the return shipping fees, as well as secondary shipping fees to get the item back to a valid address. If buyer wants a refund for the item, then the buyer agrees to pay the costs for the original shipping as well as the return shipping to sender. If buyer does not pay these fees, then the buyer agrees to forfeit all rights to the original total payment as well as the auction item. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$11.94 Shipping Condition: For parts or not working Location: Waterford, United States LOOK AT THE PICTURES.
Buy It Now
$22.00 Shipping Condition: Used Location: Highland, United States TAPMATIC 0-1/4" TAPPING HEAD 1/2" - 5/8" SHANK WRENCH BRIDGEPORT
Buy It Now
$17.50 Shipping Condition: Used Location: Halstead, United States Command Full Range Multi-Torque Tapper Tapping Head Untested. Condition is Used. Shipped with Flat Rate Freight.
Buy It Now
$18.40 Shipping Condition: Used Location: Watsontown, United States Enhance your metalworking efficiency with the Tapmatic SPD-3 Tapping Head Attachment. This versatile tool is perfect for your CNC machine and boasts a ... morereversible design that makes it easy to use. It allows you to work with tap sizes up to 0-1/4" and comes with a 5/8" shank that ensures compatibility with a wide range of adapters and holders. The Tapmatic SPD-3 is a reliable choice for professionals who demand nothing but the best from their equipment.
Buy It Now
Free Shipping Condition: Used Location: Bettendorf, United States Jarvis Corporation Super Toromatic. Model: 376. Capacity: 10 - 3/8.
Buy It Now
$18.43 Shipping Condition: For parts or not working Location: Venice, United States 1MT Tapping Head. Maximum Mild Steel Tap Capacity (mm) M4. Minimum Tap Capacity (mm) M2. Maximum Aluminum Tap Capacity (mm) M6. March 29 2024. PARTS/REPAIR. ... moreUnit has wear from previous use and has not been tested.
Buy It Now
$15.02 Shipping Condition: Used Location: Louisville, United States The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always ... morereceiving new inventory.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States The taper has a gouge in it but I cannot feel any ridges or burrs. ( depends on your device ).
Buy It Now
$11.99 Shipping Condition: Used Location: Lombard, United States Tapmatic 30TC/DC Reversible Tapping Head Attachment 0-1/4" Cap. Jacobs #2 Shank. It is used and has nicks and scratches but is in good condition overall. ... morePlease look at pictures in detail and ask questions before bidding.
Buy It Now
$26.47 Shipping Condition: New – Open box Location: Putnam, United States
Buy It Now
$16.95 Shipping Condition: Used Location: Wilmette, United States This is a used and good condition tapping head. The item is clean. Nothing that impacts the integrity of the tool. Moves well. The extension is slightly ... morebent.
Buy It Now
$10.52 Shipping Condition: Used Location: Winfield, United States Procunier high speed tapping head, model 1 series 11006 serial E in used condition. Could use a little cleaning.
Buy It Now
$16.00 Shipping Condition: Used Location: Imlay City, United States ADAPTER PART NO. C4-391.60-01 080A. USED - SANDVIK CAPTO C4 TAPPING HEAD ADAPTER. TAPPING HEAD PART NO. A393.03-SES 1-3/8".
Buy It Now
$12.00 Shipping Condition: Used Location: El Monte, United States
Buy It Now
$9.90 Shipping Condition: Used Location: Rochester, United States R5 - #6 to 1/2" & M3-M12 tap in steel- 5/8"-16 mounting thread. Left or Right Hand Tapping. Pre-Selective Torque Drive: Prevents tap breakage. 1.75 x ... more1 Reverse Ratio: Increases productivity. Shiny taper with black oxide finish for the best combination of accuracy and durability.
Buy It Now
$16.25 Shipping Condition: Used Location: New Smyrna Beach, United States Tapmatic 70 TC/DC Reversible#10 to 5/8 Tapping Attachment 3/4-16 Mount New Manufacturer: Tapmatic Tapmatic Item Number: 14775 DESCRIPTION/ SPECS: Adjustable ... moredepth control for shallow blind holes Easy handling. Compact design Less tap breakage due to pre-selective torque control Easy adaption with multiple interchangeable arbors Reduced cycle time through increased 1.75:1 reverse speed 1200 RPM max Capacity: 10- 5/8" M5-M18 3/4-16 threaded mounting hole CONDITION: New Original Packaging Opened for Pictures and Inspection INCLUDES: Item(s) described above and exactly what's pictured Just a Few Simple Notes on Shipping and Other Questions Below"Free Shipping" may sometimes vary between USPS or UPS depending on size and weight of order" Regardless of what carrier eBay shows" Thanks for your understanding. This item packed and ready to ship is estimated at"8 Pounds. 0 Ounces. We ship all orders within 24 hours excluding weekends and holidays. Please do not hesitate to Contact Us for any questions about this item. Just use the at top of page. Or feel free to give us a call at 636-337-5305 during our regular business hours. We do our very best to answer all questions in a very timely matter Monday thru Friday. We answer emails and phone calls during regular business 8-5 Mon-Fri. Thanks for your interest and we are looking forward to your business. If you would like to add us to Your Favorite Sellers simply. To shop all our other items you can and choose your category on left. You can also look to left on Top of this page and choose a category that best fits your interest. Powered by
Buy It Now
$9.80 Shipping Condition: Used Location: East Jordan, United States Tapmatic SFT II Tapping Head. Collet: ER11. M2-M5 (#2 - #10).
Buy It Now
Free Shipping Condition: Used Location: Covina, United States Made in the USA by Tapmatic Corp. For heavy applications like drill tapping or roll form tapping. Model #: SPD-5QC. Capacity: #6 to 1/2". Rugged design.
Buy It Now
$18.40 Shipping Condition: Used Location: Warren, United States This is a used lot in good condition. Please look at pictures. 12 of them are Erickson and 11 Kennametal Please check out my other listing thank you
Buy It Now
$15.00 Shipping Condition: Used Location: Spokane, United States Up for sale:Ettco Model 2B Tapping Head Tapper Straight Shank #10 to 3/8" tap capacityJust looking to offload. Works as it should, I just haven’t used ... morein so long, I can’t justify keeping it around.Make a reasonable offer and let’s get this excellent machining tool into your shop!
Buy It Now
$9.56 Shipping Condition: Used Location: Seattle, United States Offering a Procunier tapping head Series 16001 Model 2TT for your CNC, metalworking or manufacturing needs. This high-quality tapping head with shank ... moreholder is designed for use with a range of adapters and holders. Its brand name ensures that this product is reliable and durable, and it is suitable for a range of applications. Add this valuable tool to your collection today.
Buy It Now
$15.00 Shipping Condition: Used Location: El Monte, United States PROCUNIER SIZE #2 TAPPING HEAD W/ 3 MT SHANK + (7) COLLETS #8 #10 #12 1/4 5/16 3/8 & 1/2
Buy It Now
$17.00 Shipping Condition: Used Location: Unionville, United States Made in the U.S.A. by Tapmatic. This is a Self-Reversing Tapping Head Attachment w/ R8 Shank in GREAT condition. Model# R3 SPECIFICATIONS: Tap Sizes Range: ... more0 to 1/4" M1.4 to M7 Maximum Speed: 2.000 RPM Flex Collet Size: 100" to.176" 2.5 mm to 4.5 mm) Shank: R8 Overall Length: 9" Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE! If you have any questions please contact Mike@ 323-202-3955 or Nick@ 323-837-8598. Thank you.
Buy It Now
$10.60 Shipping Condition: Used Location: Greenville, United States
Buy It Now
Free Shipping Condition: Used Location: Sterling, United States Came in a buyout from a shop we purchased. Works good. In good overall condition. Comes with one collet. Ships free to continental USA. Buyers outside ... morecontinental USA please message prior to purchase for shipping quote
Buy It Now
$16.60 Shipping Condition: Used Location: Paramus, United States NICE TAPMATIC NCR OA TAPMATIC TAPPING HEAD W/ CAT40 SHANK Shank: CAT 40 Size: 4- 1/4 OR M2.5 M7* Comes as Shown* Discounted shipping available when MORE ... moreTHAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days* 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-147cb08b4e9-0x104-
Buy It Now
$17.45 Shipping Condition: Used Location: Waukesha, United States Off the floor of a shop that closed. Great piece.
Buy It Now
$11.94 Shipping Condition: For parts or not working Location: Waterford, United States USED, UNABLE TO TEST, RDT-15. THERE ARE NO USE OR MAINTENANCE RECORDS.
Buy It Now
$37.20 Shipping Condition: For parts or not working Location: Yorktown, United States Procunier 4 F Tap King Self Reversing tapping head with morse taper 3 shank. Unit feels like it may have a weak clutch so plan on it either needing to ... morebe replaced or cleaned. We have not opened it up and are just going on this assumption from bench testing. Comes with 6 collets: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8.Actual item pictured.Be sure to view our other items for more great tooling finds.
Buy It Now
$14.50 Shipping Condition: Used Location: Fruita, United States Up for sale is a TAPMATIC 30X Tapping Head. Shows signs of use with scuffs and scratches. Rubber flex collet is ripped but still works.see pictures. - ... more7/16" Shank.
Buy It Now
Free Shipping Condition: Used Location: Peoria, United States BT40 Shank. 3500 RPM Max.
Buy It Now
$18.63 Shipping Condition: Used Location: Highwood, United States Jarvis Torqomatic Tapping Head 101. Capacity 0 to 10.
Buy It Now
Free Shipping Condition: Used Location: Troy, United States MODEL; RDTIC50. COLLET SIZE; ER20. SHANK; CAT50.
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States Location: 13D. Manufacturer: Fellows. Item was removed from a local automotive plant assembly line. It was working when removed and there are no known ... moreissues. We are here to help! The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$12.00 Shipping Condition: Used Location: West Covina, United States NumberTap80 Holders included. Made in the U.S.A. by Parlec. Holder Shank: BT40.
6d 16h 53m 17s 0 bids
$520.00 Now
Free Shipping Condition: Used Location: Leechburg, United States Sent to manufacturer for professional rebuild used very little since. Recently rebuit by tapmatic.
Buy It Now
$7.57 Shipping Condition: Used Location: Seattle, United States This Procunier Tapping Head 15001 model 1 TT is perfect for those in need of a high-quality tapping solution.
Buy It Now
Free Shipping Condition: Used Location: Covina, United States Made in Switzerland by Tapmatic Corp. As you can see from the pictures there is a small chip along the edge of the spindle. Tapping head was being used ... morein this condition and it should not affect normal operation.
Buy It Now
$11.00 Shipping Condition: Used Location: United States
Buy It Now
Condition: Used Location: Brookpark, United States Inventory Number: 04130630012 Manufacturer: Description: PROCUNIER 13003 MODEL 3 TAPPING HEAD. MT#2 Capacity: Model Number: Serial Number: Additional ... moreInformation: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical in appearance. Our store h
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Procunier Tapping Head Wrench 7/8 & 19/32. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping Condition: Used Location: Kent, United States USED TAPMATIC 30 TC/DC REVERSIBLE TAPPING ATTACHMENT CAP M1.5-M7#0-1/4" RPM 2000 Comes As Shown in Picture S SHIPPING INFORMATION: Shipping Weight: ... more2 LB. Shipping from San Bernardino. Ca 92407 Handling Fee: $2.00 per package We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California CUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location.
Buy It Now
Free Shipping Condition: Used Location: Peoria, United States BT40 Shank. 3500 RPM Max.
Buy It Now
Free Shipping Condition: Used Location: Bethlehem, United States
Buy It Now
$16.25 Shipping Condition: Used Location: Santa Cruz, United States The head appears to function when worked by hand. This is a cork clutch type head. sold as is.
Buy It Now
$26.25 Shipping Condition: Used Location: Lenoir, United States PROCUNIER 12006 2E HIGH-SPEED #2 TAPPING HEAD w/ 7 COLLET SET, ROD, Closed Shop. Condition is Used. 2MT shank From a closed job shop. Thanks for looking ... moreNo reserve May God Bless!!!!
Buy It Now
Free Shipping Condition: For parts or not working Location: Bethlehem, United States
Buy It Now
$9.99 Shipping Condition: Used Location: Watsontown, United States So why wait?.
Buy It Now
Free Shipping Condition: Used Location: Xenia, United States THIS WILL HOLD A LYNDEX NT05 STYLE TAP COLLET (NOT SHOWN) OR A COMMAND XTC1 STYLE TAP COLLET (NOT SHOWN). TOOL HOLDER. THERE IS NO LABELING ON THIS TOOL ... moreHOLDER. ITEM TITLE. LOCATION: WB7-4-4-11. YOU ARE PURCHASING THE PICTURED.
Buy It Now
$10.60 Shipping Condition: Used Location: Elkin, United States TapMatic 30 TC/DC tapping head. Thanks for looking!!!
Buy It Now
$7.57 Shipping Condition: Used Location: Johnson City, United States Tapmatic 30X Tapping Head. #3 Morse Taper Shank. #0 to 1/4", M1.4 to M6 Capacity. To Find Our Cell Phone Number from a PC.
Buy It Now
$12.00 Shipping Condition: Used Location: United States
Buy It Now
$9.99 Shipping Condition: Used Location: Watsontown, United States This high-quality tapping head is a great addition to any workshop. It is designed to fit MT3 shanks and is perfect for use in CNC, metalworking and manufacturing ... moreapplications. The head/holder type is tapping head shank and the country/region of manufacture is unknown. This toolholding adapter is ideal for use in a wide range of industries, including business and industrial applications. The Procunier Model 1 Style Tapping Head is a versatile and reliable tool that can be used for a variety of tasks.
Buy It Now
$12.45 Shipping Condition: Used Location: Amelia, United States Enco HR-1 tapping head, 1.4mm to 7mm capacity. Jacobs 1/2" / 33JT shaft. Nice condition, smooth action.
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States Location: 41D. Item was removed from a local automotive plant assembly line. It was working when removed and there are no known issues. We are here to ... morehelp! The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
|
|
|
|
Tapmatic Corporation/Burgmaster Model 3000 Tapping Head
Tapmatic Corporation/Burgmaster Model 3000 Tapping Head. Works fine. Thread size is 5/16-24 NF.
|
|
|
PROCUNIER TAPPING HEAD MODEL # 2 SERIAS- E WITH MT2 SHANK MADE IN THE USA
YOU BIDDING ON A USED PROCUNIER TAPPING HEAD MODEL#2 SERIES-E. CAP. 6 TO 1/2" SHANK MT2, HAS BEEN CHECKED IN SIDE THE TOOL CLUTCH, LOOKING GOOD, BEARING ALL IN A GOOD WORKING CONDITION. IF YOU HAVE A QUESTION, PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES 18.00.
|
|
|
TAP TOOL SUPER SENSITIVE TAPPING HEAD
TAP TOOL SUPER SENSITIVE TAPPING HEAD VERY GOOD USED CONDITION. SOLD AS IS. WE SHIP IN USA ONLY. WE ACCEPT PAYMENT BY PAYPAL ONLY. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e9f3abc0f-0x101-
|
|
|
Parlec S37-80TA3 Tapping Head with 3/8 Shank used (my ID-U21)
I combine shipping so shop for more in my Store and save. For my convenience I ship mostly flat rate boxes but if you think you can save by using another option let me know at time of purchase and I will do it as long as its within postal guidelines. If you have purchased and paid for multiple auctions and more shipping was paid for then I need to get your items to you I will issue a refund for any overage. Thanks for looking and Have a good day.
|
|
|
TAPMATIC MODEL 30X SELF REVERSING TAPPING HEAD WITH 2 COLLETS, 0-1/4" CAPACITY
TAPMATIC TAPPING HEAD MODEL 30X SELF REVERSING 0-1/4" CAPACITY#2 MORSE TAPER ARBOR COMES WITH 2 RUBBER FLEX COLLETS, EXCELLENT CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5497 2# BUY MORE THEN ONE ITEM AND SAVE ON SHIPPING CHARGES! WE SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours to keep. Thank you. ... morePowered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Procunier No 3E Tapping Head W/5Collets# 8 - 10 - 1/4- 5/16 & 3/8, 5/8" St shank
Collets are#8- 10- 1/4" 5/16" 3/8" Head tested and works good
|
|
|
BURGMASTER 3000XB TAPMATIC THREAD THREADING TAPPING HEAD
BURGMASTER 3000XB TAPMATIC THREAD THREADING TAPPING HEAD Burgmaster 3000XB THREADING TAPPING HEAD Tapmatic Corp Approx 4" total length This listing is for a used Burgmaster 3000XB tapping head. Appears to be in good condition with some typical cosmetic wear of the painted finish. Their are no other pieces with this as for collets. Mounting shank, or tools. Don't miss your chance to own this threading tap now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. 3/16. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third parties. Intention of payment ... moreshould be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shipping prices to these locations may be subject to corrected updating if they are found to be incorrectly formulated. We offer combined shipping whenever possible as items can be combined and shipped together. Combined shipping can save substantial money especially on the smaller type items. We can only offer combined shipping when the items can be shipped and packaged at the same time. When using combined shipping. Please do not pay until you have purchased all o
|
|
|
TAPMATIC model 30X Tapping Head + 1 collet
GREAT DEAL! This auction is for a TAPMATIC model 30X Tapping Head + 1 collet. This head is used. In good used condition. Retail price well over $700. I have been in the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 30 years. Ask about many other tooling items- solid carbide boring bars, end mills, drills, taps, reamers, tool holders, scales, number& letter stamp sets, ect. If you win more than 1 item, please wait untill we send you an invoice with combined s&h costs. If you pay for them seperately, I will have to ship them seperately to track each item. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item Buyer pays $11.00 s&h anywhere ... morein the USA(50 states)this includes insurance& delivery confirmation on all items)No APO mailing addresses on this item) We ship to USA mailing addresses only. We gladly combine s&h costs on multiple auction won in the same day. 1st item s&h is full price. Each additional item s&h is 1/2 price. We do not do pick-up or delivery on any local sales. PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an effort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. I combine shipping on multiple items won in the same auction day. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was received in) and we will refund your payment. 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13eac95b1d0-0xf5-
|
|
|
Procunier #1E Tapping Head W/4collets#6 # 8 #10 &12" 1/2" ST shank
Tested and works good. Has new clutch
|
|
|
Ettco 1-b Tapping Head Clutch 2mt 6 To 1/4"
Used condition with handle and collet. Posted with
|
|
|
Procunier No3E Tapping Head W/5Collets1/4- 5/16 - 3/8 - 1/2 - 5/8, 5/8" ST Shank
Collets are 1/4" 5/16" 3/8- 1/2& 5/8 Head tested and works good
|
|
|
1 MORSE TAPER SHANK REVERSIBLE TAPPING HEAD drill press tool TAPMATIC USA 50 X
good used reversible tapping head Tapmatic USA 50 X 1 MT shank rubberflex tap chuck capacity#6 to 1/2" functions properly when turned by hand please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PROCUNIER SERIES 13002 TAPPING HEAD
It look like the housing was broken and welded back. Please zoom on the pictures sold as is PROCUNIER SERIES 13002 TAPPING HEAD MODEL-3. SERIAL NO- E ITS A LITTLE DIRTY AS SHOWN ON THE IMAGES
|
|
|
USED SPI NON-REVERSING TENSION & COMPRESSION TAPPING HEAD 75-856 (3/4"-Shank)
LISTIN G IS FOR A USED TAPPING HEAD/ CHUCK BRAND- SPI PART# 75-856 MADE IN JAPAN NON-REVERSING TENSION AND COMPRESSION CAPACITY COLLETS- 1/2 to 1" USES SIZE"2" SPI COLLETS SHANK- 750" OAL- 7.00" CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY
|
|
|
Procunier 4F Tapping Head With 2 morse Taper Qty 5 Collets1/2" to 7/8"&1/4" pipe
Tested and in good condition.Collets 1/2" 5/8" 3/4" 7/8" 1/4" pipe
|
|
|
Procunier Tapping Head Model 2 serial E with Tap series 12006 nice condition
Procunier Tapping Head Model: 2 serial: E series 12006 with tap as shown in nice used working condition please see all photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
|
|
|
PROCUNIER 23MA.2 MULTIPLE SPINDLE TAPPING HEAD, 3/4" STRAIGHT SHANK
Inventory Number: 05130510137 Manufacturer: Description: PROCUNIER 23MA.2 MULTIPLE SPINDLE TAPPING HEAD. 3/4" STRAIGHT SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item wi
|
|
|
Enco Quick Change Drilling and Tapping Head, 1/4"-3/4", #1 Morse Taper (MT1)
Enco Quick-Cha nge D rilling and Tapping Head 1/4"3/4" Capacity# 1 Morse Taper S tamped Part#B5030171 4232 JJ2 It is well lubricated and very s mooth bearings. It is in pristine condition. We just have no need for it anymore. Comes in a storage box with two collets. Taps Right& Left Hand Threads. Interchangeable Shank for use on many machines. Includes pieces shown in the pictures. Ask any questions& thanks for shopping! About Us The Geek Group is a non-profit science and tech facility located in Grand Rapids. Michigan. We sell surplus items as well as gear and projects built at our labs. And of course, we build awesome! Shipping Orders will be shipped within 3 business days unless other arrangements are made. Items shipped freight may take longer. But we will communicate with you in these instances. We will ship via the ... moremost cost effective avenue for both parties and you will receive a tracking number as soon as your order is shipped. Shipping can be combined on most orders with multiple items. Local pick-up is always available. Payment We use eBay’s safe and secure checkout. Just click the Pay Now button at the top of any auctions you have won. We accept Paypal only. Cash is acceptable if you will be picking up your items. Payments must be received within 7 days from the end of auction unless other terms are mutually agreed upon. Contact Us Feel free to contact us here on eBay with any questions. Concerns or comments. We'll happily reply as soon as possible!
|
|
|
CAT50 Tool Holder With BILZ Tapping Head WF1 IKP, M/1", CNC
You are bidding on a CAT50 Tool Holder With BILZ Tapping Head WF1 IKP. M/1" I am selling a ton of other collets and tool holders. Make sure you check out my other listings. I will combine shipping whenever I can! Thanks for looking. Good luck on your eBay searches. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. tr500.
|
|
|
SPV SAR - 50 Tapping Head Attachment / Parts
Misc parts from what was once an assembled SPV SAR-50 mill tapping head. I don't know how to put it back together. But it does come with some serviceable parts that would benefit you if you need to repair yours. Housing. Shaft, Rubber Collet(2.5-4.5 mm) etc. see the photos for details on what you're getting. Hopefully you can make more use out of it than I can.
|
|
|
Ettco Emrick 2-B Sensitive Tapping Attachment Head Morse Taper #2 2MT
Welcome! Up for sale is a Ettco Emrick 2-B Sensitive Tapping Attachment Head Morse Taper#2 2MT. Used in good condition. Feel free to email any questions! SCT2282
|
|
|
PROCUNIER TAPPING ATTACHMENT SIZE 2 THREAD THREADING TAPPING HEAD 5/16 -1/2"
PROCUNIER TAPPING ATTACHMENT SIZE 2 THREAD THREADING TAPPING HEAD 5/16-1/2" The Procunier Tapping Attachment/ Threading Tapping Head Size# 2 Has 1-3/4" attachment opening on top. Capacity: Brass 1/2" Iron 3/8" Steel 5/16" This listing is for a used Procunier tapping head. Appears to be in good used condition with some typical cosmetic wear of the outer finish. Their are no other pieces with this as for no other collets or tools. Don't miss your chance to own this threading tap now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered ... moreshipping addresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shipping prices to these locations may be subject to corrected updating if they are found to be incorrectly formulated. We offer combined shipping whenever possible as items can be combined and shipped together. Combined shipping can save substantial money especially on the smaller type items. We can only offer combined shipping when the items can be shipped and packaged at the s
|
|
|
Commander Johansson tapping head attachments
Picture shows two tap holders designed to fit a commander style drill/tap head. They are set up to drive two Bendix#6 taps(included) Appear to have been well cared for and move freely. Bag they are in is marked Templeton Kenly& Company, 1900 Raymond Drive, Northbrook, Ill, 60062(312) 272-7800. Also, Item No. box on bag has the number 74004 put on with a magic marker as well as some other numbers that COULD be TH125 and 6(or 8)T. I have other listings and would consider combined shipping.
|
|
|
Procunier Lead Screw Tap Tapping Head Morse Taper #2 Shank 2MT
Welcome! Up for sale is a Procunier Lead Screw Tap Tapping Head Morse Taper#2 Shank 2MT. Support post is broken off. Includes installed collet and nut. Used in good condition. Feel free to email any questions! SCT2281 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13edd00f2a6-0xfc-
|
|
|
TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH #2MT SHANK
Search Titles and Descriptions Categories Policies Gallery TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH#2MT SHANK TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH#2MT SHANK TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH#2MT SHANK TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH#2MT SHANK TAPMATIC SPD5 REVERSIBLE TAPPING HEAD ATTACHMENT WITH#2MT SHANK Specifications Capacity: 6-1/2" Max RPM: 1.500. Ovearall Length: 9-1/2" Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
Procunier No 2E Tapping Head W/5 Collets, 1/2" ST Shank
Collets are#6- 8- 10- 1/4" 5/16" 3/8" Head tested and works good
|
|
|
THE PROCUNIER TAPPING ATTACHMENT SIZE 3 THREAD THREADING TAPPING HEAD MT4 1/2"
THE PROCUNIER TAPPING ATTACHMENT SIZE 3 THREAD THREADING TAPPING HEAD MT4 1/2" The Procunier High-Speed Tapping Attachment/ Threading Tapping Head Size# 3 Style E MT- 4 Capacity: Brass 3/4" Iron 5/8" Steel 1/2" This listing is for a used Procunier tapping head. Appears to be in good used condition with some typical cosmetic wear of the painted finish. Their are no other pieces with this as for no collets or tools. Don't miss your chance to own this threading tap now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping ... moreaddresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shipping prices to these locations may be subject to corrected updating if they are found to be incorrectly formulated. We offer combined shipping whenever possible as items can be combined and shipped together. Combined shipping can save substantial money especially on the smaller type items. We can only offer combined shipping when the items can be shipped and packaged at the same time. When using
|
|
|
Tapmatic R3 Tapping Head
Item is a Tapmatic R3 Automatic Tapper. It has a broken handle& does NOT come with wrenches. Shipping: $15.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ede71f09c-0x108-
|
|
|
PROCUNIER TAPPING HEAD, MODEL 3, SERIES 13048, 3/4" CAPACITY
Inventory Number: 05130510146 Manufacturer: Description: PROCUNIER TAPPING HEAD. MODEL 3, SERIES 13048, 3/4" CAPACITY Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be f
|
|
|
ETTCO-EMRICK NO.200 TAPPING HEAD, 3/16" CAPACITY, MT#2 SHANK
Inventory Number: 05130510145 Manufacturer: Description: ETTCO-EMRICK NO.200 TAPPING HEAD. 3/16" CAPACITY, MT#2 SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be f
|
|
|
TAPMATIC TYPE TAPPING HEAD ATTACHMENT 0 TO # 10
UP FOR SALE ISA TAPMATIC TYPE TAPPING HEAD ATTACHMENT 0 TO# 10. THIS PART HAS BEEN USED AND IS IN GOOD WORKING ORDER. MINOR PITTING AND SCRATCHES. I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. S1283
|
|
|
Procunier Tapping Head Style F Size 4 w/4-Morse Taper Arbor "Mint"
This has had very little use and is in perfect operating and cosmetic condition. Style F size 4 with Morse 4 taper I believe. It was used on a very large drill press. New it's over $1700. I don't know a lot about Morse tapers but guessing this one is a 4? 1" on the small end and 1 1/4" on the fat end. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13ee1fad838-0xff-
|
|
|
ETTCO EMRICK No 1-B SENSITIVE No 6 -1/4 TAPPING HEAD ATTACHMENT THREAD THREADING
ETTCO EMRICK No 1-B SENSITIVE No 6-1/4 TAPPING HEAD ATTACHMENT THREAD THREADING Emrick Tapping Attachment/ Threading Tapping Head No 1-B MT- 2 No 6-1/4" tap steel This listing is for a used tapping head. Appears to be in good used condition with some typical cosmetic wear of the painted finish. Their are no other pieces with this or the chuck key is missing which can be easily replaced. Don't miss your chance to own this threading tap now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third ... moreparties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shipping prices to these locations may be subject to corrected updating if they are found to be incorrectly formulated. We offer combined shipping whenever possible as items can be combined and shipped together. Combined shipping can save substantial money especially on the smaller type items. We can only offer combined shipping when the items can be shipped and packaged at the same time. When using combined shipping. Please do not pay until
|
|
|
PROCUNIER 3/8" TAPPING HEAD ATTACHMENT w/ 1/2" SHANK
aims PROCUNIER 3/8" TAPPING HEAD ATTACHMENT w/ 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Tapping Head Attachment in good condition. Specifications: Capacity: 3/8" approx. Shank: 1/2" Overall Length: 6-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PROCUNIER 3/8" TAPPING HEAD ATTACHMENT w/ 1/2" SHANK PROCUNIER 3/8" TAPPING HEAD ATTACHMENT w/ 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
TAPMATIC NCR-0A SELF REVERSING TAPPING HEAD W/ CAT 40
TAPMATIC SELF REVERSING TAPPING UNIT MADE IN U.S.A. MODEL NCR-0A 1/4" OR M7 CAPACITY. 3.000 MAX. RPM CAT 40 HOLDER Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. FREE USPS Priority Mail shipping with tracking* STOCK NO. A2 Thanks for looking!
|
|
|
tapmatic model 1a tapping head.0 to1/4" with 1 collet .free taps with buy it now
nice condition.3/4 shank.comes with 1 collet 0 to#10& 2 shop made wrenches.will hold a 10-32.free taps& flat rate box shipping with"buy it now" only.ready to tap holes.
|
|
|
ABC ABC1-M1-M6 REVERSIBLE TAPPING HEAD ATTACHMENT WITH JT6 TAPER MOUNT
ABC ABC1-M1-M6 REVERSIBLE TAPPING HEAD ATTACHMENT WITH JT6 TAPER MOUNT
|
|
|
Vintage Reed & Prince 100 Pan Head Tapping Screws Type A Zinc Chromate 12 4
We have a"lot" of old/vintage wood screws also and will combine shipping We have other tools and combine shipping. ALERTS_ 1) On any of my items. Whether it is A uction or B uy I t N ow/ M ake O ffer. Feel free to message me and tell me what you would like to pa y for the item and I will change the starting price and/or buy it now price to th at amount(providing it is reasonable. Although I am known to accept unreasonable ones as we ll! LOL) so you can bid or buy it. I am better than a store. Flea market or any where else you can buy as my prices are TRULY negotiable: 2) I have to add these to my listings. SORRY to anyone who knows how to buy/bid properly. ANY Questions Please Ask BEFORE Bidding/Buying. ALL items sold AS IS. There will be NO refunds. I describe my items to the best of my ability and you will get what is described ... moreand what you see in the photos. If you are not sure of something or do not read something is included DO NOT assume it is. Because most likely if it doesn't say it is included or the photo doesn't show it is included, then it isn't. THANKS FOR LOOKING AND GOOD LUCK IF YOU BID: 3) All auctions must be paid for within 3 days of auction end. If you buy multipl e items it is 5 days.If the item is not paid for within that time frame and I have had NO contact wit h you. The item will be re-listed or re-sold to the next highest bidder. 4) Prices I ask for are for the item. Cost of listing fees, shipping fees, Paypal fees, gas to go to post office, and other e xp enses such as packing materials. so the cost of the item itself is very minimal.trying to make it af fordable for all and still be able to enjoy the process and meet nice people alo ng the way: 5) I have a very large stock on Collectibles. Antiques, and fun old stuff as well as some new stuff occasionally. I try to add ne w items weekly and sometimes try to do it daily. This is a collection from many years a nd has been either in an attic or a storage unit in bins for a real long time.I al
|
|
|
PROCUNIER STYLE EW, SIZE 2,TAPPING HEAD AND (7) COLLETS
SquareTrade © AP6.0 This is a Procunier Tapping Head. Style EW- Mounts to mill or drill spindle and driven by a key. Has the std. Style E bottom assembly. Size 2- Capacity: 1/2" Brass. 3/8" Cast Iron, 5/16" Steel Spindle Clamp Collar- 2" I.D. 6) Collets- Includes(2) 1/4" 5/16" 3/8" 1/2" and 10mm Auto Reverses with spindle retraction See Photos Weight 8 Pounds I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ... moreALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 42 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! See other tapping heads and more items in our e-Bay store. Be sure to add me to your favorites list! On Feb-17-09 at 12:05:59 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Ap
|
|
|
SNOW TAPPING HEAD -MODEL 416 CAPACITY 1/2" MS
SNOW 1/2" TAPPING HEAD INVENTORY# 1597 MODEL: 416 S/N: 17529 SPECIFICATIONS: CAPACITY: 1/2" MS GOOD CONDITION CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone ... more800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation. NORMAN MACHINE TOOL. LTD. CONDITIONS OF SALE: INSPECTION AND TEST EQUIPMENT Inspection& Test Equipment will be sold"AS IS" with a conditional return policy on a case by case basis. Please ask questions! The equipment's condition stated in the listing is accurate to the best of our
|
|
|
NICE! GENUINE WAHLSTROM 1/4" HEAVY DUTY TAPPING HEAD W/ 2MT SHANK
Made by American Machine& Foundry Co. This is a used Wahlstrom Heavy Duty Tapping Head Attachment in good condition. Does not include key for chuck. Specifications: Capacity: 1/4" approx. Shank: 2 Morse Taper Overall Length: 8-1/4" Comes as shown in pictures.
|
|
|
Procunier High Speed Tapping Head Model 2 Series 12048
Procunier High Speed Tapping Head Model 2 Series 12048 No Handle/ Wrenches Included Item is in good working condition. This listing is for(1) Procunier Tapping Head USED. ShelfG29 04122970JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at ... moreit's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
|
|
|
Geometric 7/8-14 Left Hand Thread Chasers for 1-1/4" D Tapping Head Set of 4
Geometric 7/8-14 Left Hand Thread Chasers for 1-1/4" D Tapping Head Set of 4. Right hand thread, 11/4 D, 0.944" thread length, 0.560" thick, numbered set of 4 Used but sharp and clean. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ef2778c90-0xf1-
|
|
|
Geometric 5/16-18 Thread Chasers for 3/4" D Tapping Head Set of 4
Geometric 5/16-18 Thread Chasers for 3/4" D Tapping Head Set of 4. 3/4 D, 0.4045" thick, numbered set of 4 Used and sharpened- only some 3/8" of the thread left. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
7 9/16-12 NF Thread Chasers for 3/4" D Tapping Head Set of 4
7 9/16-12 NF Thread Chasers for 3/4" D Tapping Head Set of 4. 3/4 D, U-3, 45° chamfer, 0.405" thick, numbered set of 4 Used but clean and sharp. Some random writings on three of them. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
Geometric Tap Tapping Head 1 1/4" x 4" shank In box Very Good Condition
Geometric Tapping Head in box. Very complete and good condition. I know very little about these tapping heads but will try to answer questions. Very complete from what I can tell and looks to me used very little. Sold as is. Please ask all questions prior to bidding. Thanks! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Z3514 - 75MM RADIAL TAPPING HEAD - DEMO
USED Z3514 75MM RADIAL TAPPING HEAD WITH NIKKO COLLET SYSTEM. TENSION AND COMPRESSION UNI FOR NAKAMURA TW30 BUILTER 1994 OR NEWER. Thank you for viewing our item. We appreciate your business. And look forward to offering many great products in the future. For over 50 years, Methods has been North America's foremost supplier of leading-edge precision machine tools and parts. We are far more than just a sales rep group, our staff of engineers actually create specifications and design solutions for innovative metalworking products. We then work with our machine tool manufacturing partners worldwide to turn those ideas into reality. PN# Z3510-USED Note: if you would like us to ship the product using your freight company or account number please notify us before purchase and we will gladly arrange.
|
|
|
PROCUNIER # 2 HIGH SPEED TAPPING HEAD ATTACHMENT # 3 MORSE TAPER, 3/4" ADAPTER
UP FOR SALE IS THIS PROCUNIER# 2 HIGH SPEED TAPPING HEAD ATTACHMENT# 3 MORSE TAPER WITH 3/4" ADAPTER. THIS IS A PROCUNIER# 2 HIGH SPEED TAPPING ATTACHMENT HEAD. 3 MORS E TAPER WITH 3/4" ADAPTER. THIS PART IS USED AND SHOWS SIGNS OF WEAR. THERE IS SOME SCARS. IN GOOD USABLE CONDITION. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1 423
|
|
|
USED TAPMATIC STYLE TAPPING HEAD ATTACHMENT 1/4" CAPACITY
UP FOR SALE IS THIS USED TAPMATIC STYLE TAPPING HEAD ATTACHMENT 1/4" CAPACITY. THIS IS A USED TAPMATIC STYLE TAPPING ATTACHMENT HEAD. HAS 1/ 4" CAPACITY. THIS PART IS USED AND SHOWS SIGNS OF WEAR. THERE IS SOME SCARS. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1 42 5
|
|
|
PROCUNIER # 2 STYLE E HIGH SPEED TAPPING HEAD ATTACHMENT 1/2" SHANK
UP FOR SALE IS THIS PROCUNIER# 2 STYLE E HIGH SPEED TAPPING HEAD ATTACHMENT 1/2" SHANK. THIS IS A PROCUNIER# 2 STY LE E HIGH SPEED TAPPING ATTACHMENT HEAD. HAS 1/2" DIAMETER SHANK. THIS PART IS USED AND SHOWS SIGNS OF WEAR. THERE IS SOME SCARS. IN GOOD WORKING CONDITION. NEEDS WORK AND CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S1 42 4.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13ef388804b-0xf6-
|
|
|
TAPMATIC REVERSING TAPPING HEAD NCROA CNC MILL 1/4" CAP. 3000RPM 1" SHANK
TAPMATIC REVERSING TAPPING HEAD NCROA CNC MILL 1/4" CAP. 3000RPM 1" SHANK, PRICE IS FOR*1* TAPMATIC TAPPING HEAD NCROA 2 ARE AVAILABLE. 1" SHANK. 1/4" M7 CAPACITY, 3000RPM, EXCELLENT CONDITION AS SHOWN. TAPPING HEAD REVERSES 1: 1 RATIO. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
SWISS!! TAPMATIC 50X REVERSIBLE TAPPING HEAD w/ 3/4" SHANK
aims SWISS! TAPMATIC 50X REVERSIBLE TAPPING HEAD w/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Switzerland by Tapmatic. This is a Tapmatic Reversible Tapping Attachment in good condition. Model# 50X Features: TAPMATIC The World Standard For Manual Tapping Applications. Greater Thread Accuracy. Higher Production. Consistent Trouble Free Performance. Self-Reversing Tapping Units. For Manually Operated Drilling And Milling Machines. Pre-Selective Torque Drive: Prevents tap breakage. 1.75 x 1 Reverse Ratio: Increases productivity. Self-Feed: Ensures gauge perfect threads. Re-Entry Cushion: Eliminates cross-threading. Specifications: Shank: 3/4" Capacity: M3- M12. 6- 1/2" Max. RPM: 1500. Collet: 260" Overall Length: 9-1/2" Comes as shown in pictures. ... moreCheck out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWISS! TAPMATIC 50X REVERSIBLE TAPPING HEAD w/ 3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
TAPMATIC 30X REVERSIBLE TAPPING HEAD W/ 5/8" SHANK & COLLET
aims TAPMATIC 30X REVERSIBLE TAPPING HEAD W/ 5/8" SHANK& COLLET read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Tapmatic. This is a Tapmatic Reversible Tapping Attachment& 4 Rubber Collet in good condition. Model# 30XB Features: TAPMATIC- The World Standard For Manual Tapping Applications. Greater Thread Accuracy. Higher Production. Consistent Trouble Free Performance. Self-Reversing Tapping Units For Manually. Operated Drilling And Milling Machines. Pre-Selective Torque Drive: Prevents tap breakage. 1.75 x 1 Reverse Ratio: Increases productivity. Self-Feed: Ensures gauge perfect threads. Re-Entry Cushion: Eliminates cross-threading. Specifications: Shank: 5/8" Capacity: 10 3/16" M5. Max. RPM: 2.000. Comes as shown in pictures. Check out the photos! if you ... morehave any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TAPMATIC 30X REVERSIBLE TAPPING HEAD W/ 5/8" SHANK& COLLET Reliable Tool Inc. c 2011 | Powered by
|
|
|
Procunier 1E Tapping Head # 1 Morse Taper W/4 Collets
I believe the tapping was not used. Collets are#6- 8- 10- and 1/4" List included
|
|
|
Procunier #3 Tapping Head Collets Tap Collet
8. 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4" 1/8" 1/4" Pipe. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
1/4" PROCUNIER #1 Series-21035 Lead-Screw Tapping Head
Procunier Tapping Head MODEL 1 SERIES 21035 SERIAL NUMBER B3792
|
|
|
GERMAN TAPPING HEAD GA/242-2
SquareTr twflwar German Tapping Head. Model GA/242-2. There is no other information on the head other than'Made in Germany' It is in great condition. Tested and Functional. There is a minor amount of surface corrosion. Spindle mount. Best of Luck! TERMS AND CONDITIONS: Description: WE WISH TO MAKE CLEAR TO POTENTIAL BUYERS THAT ALL ITEMS. NEW AND USED, ARE SOLD AS/IS. We do our best to describe each item accurately, pointing out any known flaws. It is the responsibility of the buyer to thoroughly read the description and to look at all the pictures. We welcome any and all questions and will try to RESPOND CLEARLY AND PROMPTLY. Ultimately, we want our buyers to be educated and HAPPY with their purchase(s) ACCEPTED PAYMENT METHODS: per ebay rules. We only accept PayPal payments. for some items. We will allow local pick-up. Please inquire. ... moreCASH ONLY for local pick-up. PAYMENT MUST BE MADE WITHIN FIVE(5) DAYS AFTER THE END OF AUCTION OR SALE. WE RESERVE THE RIGHT TO REFUND PAYMENTS FROM CUSTOMERS THAT ARE NOT COVERED BY THE PAYPAL SELLER PROTECTION POLICY. CONFIRMED ADDRESSES ONLY. PLEASE INQUIRE IF YOU HAVE ANY QUESTIONS. SHIPPING DETAILS for u.s. shipping we use either fedex ground or usps. WE WILL ONLY SHIP TO THE ADDRESS LISTED ON THE PAYPAL PAYMENT PAGE. our u.s. FLAT SHIPPING RATES ONLY APPLY TO THE 48 CONTIGUOUS STATES. Additional rates may apply to PO boxes. Hawaii and alaska. PLEASE INQUIRE if the actual shipping/handling cost is less than the quoted price in the listing. We will refund the difference. we are not in the business of trying to profit from excessive shipping charges. international shipping is usps international express. USPS International priorit
|
|
|
EMUGE TAPPING HEAD SET. VERY NICE TOOL! PLEASE SEE MY WRITE-UP BELOW
This is a VERY nice Emuge Tapping Head Set. Tapping Head#KSL-4-1-1/2 W/3 Collets. Collets- M-30/ 1-1/8"7/ 1"8UNC/ With Taps to Match ALL. More Photos Upon Request(Add Phone# email address) Questions: Contact Fritz. 518-966-8320 Stock#73 Hey guy's I dropped the price! You don't want to pay for this set brand new!
|
|
|
1-E Procunier Tapping Head #2 Morse Shank R8 Adapter Wrenches 30 Collets & Taps
This lot contains: Procunier Tapping Head Style 1-E with a 0-1/4" Capacity Morse Taper Shank#2 R8 Adapter two wrenches two extended reach taps 30 collets with taps The Procunier tapping head is used but is in excellent working condition. The 30 collets and taps alone are worth over $1000- what a deal! I try to give as accurate of a description as I can and point out any flaws that I notice in an item. If I overlook something. Please bring it to my attention so I can address the issue. I want you to be happy with your purchase! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f0a31d551-0xf6-
|
|
|
TAPMATIC 50TC/DC #6 to 1/2" Reversing Tapping Head. 2 Collets, Parts, and Manual
This is a very very nice Tapmatic 50 TC/DC. capacity up to 1/2" with Depth setting and Torque Control. It is in the original box with wrenches. 2 collets, a few spare parts, and the original manual. This is the most complete used unit on ebay. These are over $1,000 new. We accept Paypal only. Free shipping to US(fees apply for Alaska and Hawaii)
|
|
|
Tapping Head, CAT 40 Mount
Used Tapping Head with 3 collets Usable condition Sold As Is
|
|
|
MACHINIST TOOLS LATHE MILL Tapmatic Tapping Tap Head 50X 50 X
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
|
|
|
TAPMATIC MODEL 1B #10 - 5/8" CAPACITY TAPPING HEAD FOR CNC MILLING MACHINE SHOP
BE SURE TO LOOK AT ALL PICTURES YOU MUST CLICK FIRST TO SEE THE REST USED/ WORKING TAPMATIC MODEL 1B#10- 5/8" CAPACITY TAPPING HEAD- SHIPPING DETAILS- Shipping is calculated by ebay/ Canada post see shipping details at top. WORLDWIDE SHIPPING AVAILABLE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. CHECK OUT OUR ... moreEBAY STORE BY CLICKING THE LINK BELOW DANDRMFG EBAY STORE Powered by
|
|
|
PROCUNIER HIGH-SPEED TAPPING HEAD - SIZE 2 STYLE EX W/ JACOBS 6A DRILL CHUCK
aims PROCUNIER HIGH-SPEED TAPPING HEAD- SIZE 2 STYLE EX W/ JACOBS 6A DRILL CHUCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by The Procunier Safety Chuck Co. This is a used Tapping Head Atttachment in good condition. Style# EX Size: 2 Features: Jacobs 6A 0-1/2" Drill Chuck. Specifications: Capacity. Brass: 1/2" Cast Iron: 3/8" Steel: 5/16" Overall Length: 11-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PROCUNIER HIGH-SPEED TAPPING HEAD- SIZE 2 STYLE EX W/ JACOBS 6A DRILL ... moreCHUCK PROCUNIER HIGH-SPEED TAPPING HEAD- SIZE 2 STYLE EX W/ JACOBS 6A DRILL CHUCK PROCUNIER HIGH-SPEED TAPPING HEAD- SIZE 2 STYLE EX W/ JACOBS 6A DRILL CHUCK Reliable Tool Inc. c 2011 | Powered by
|
|
|
Tapmatic R3 Self reversing 0-1/4 inch tap size tapping head. 1/2 inch shaft.
TAPMATIC R-3 SELF-REVERSING#0-1/4" TAPPING HEAD MODEL: R-3 DESCRIPTION: BALL-DRIVE SELF-REVERSING TAPPING UNIT for MANUALLY OPERATED MILLING& DRILLING MACHINES Specs. CAPACITY IN 1010 MILD STEEL: 0-1/4" M1.4-M7 MAXIMUM SPEED: 2000 RPM SELF FEED: MINIMUM) 156- 312(MAXIMUM) FEATURES: STATE-OF-THE-ART BALL DRIVE FOR SMOOTH OPERATION AND RIGHT OR LEFT HAND TAPPING RUGGED BALL CLUTCH PROTECTS TAPS IN BLIND HOLE APPLICATIONS 1.75 x 1 INCREASED REVERSE SPEED FOR HIGHER PRODUCTIVITY The unit was used very little. Model shop use only.
|
|
|
Barely Used Tapmatic NC R50-CP Tapping Head 1/2" max cap, CAT50 flange available
Item Name: Tapmatic NC R50-CP Tapping Head. Condition: Used. In good condition, with little wear. Contents: 1 Tapmatic Tapping Head. CAT 50 Flange available. Description: This is a Tapmatic NC R50-CP Tapping head in good used condition. Has seen very little use. Max capacity of 1/2" or M12. 2500 RPM maximum. CAT 50 flange available upon request. Payment Policy: We accept payment via verified PayPal and local cash pickup. Shipping Policy: Our products are shipped via UPS ground only. Product will be shipped promptly within one to two business days after payment is received. You will receive an email once the product has shipped with a tracking number for your order. About Us: Cutting Tool Control was formed over three decades ago to provide the machine tool industry in Washington. Oregon, Vancouver BC& Northern Idaho with quality ... moreCNC-manufactured precision cutting tools and accessories. At Cutting Tool Control, we offer a variety of products and services that help our customers stay competitive and keep costs down. Our in-house production and manufacturing facility can engineer. Design and manufacture custom cutting tools for any job. We also provide a wide variety of remanufactured and reconditioned quality brand tools at affordable prices. We manufacture and regrind tools on our cutting edge Saacke CNC 5-Axis Grinding Center, allowing us greater control, precision, and accuracy than the competition. Our warehouse is always stocked with endmills. Chamfer mills, ball end mills, drills, corner rounders, carbide inserts, spade drills. More tools than we can even count! Give us a call to check inventory for used tool availability, or if you'd like us to fabricate or manufacture a custom tool for you. We also supply a wide variety of cutting tool accessories. Including Blaser Swisslube coolant for wet grinding, tool holders, manual and CNC machining supplies, and much more. Give us a call. You've got a job to get done- we've got the tools to do it. Telephone: 206) 789-7277 Fax: 206) 826-6579 Discl
|
|
|
200 KWIK SWITCH TAPPING HEAD + COLLETS 113J
| | 200 KWIK SWITCH TAPPING HEAD + COLLETS 113J, Click to View Image Album You are buying a used but good tapping head and collets. The tapping head is a tension compression style. And it has a Universal Kwik Swicth shank, The collets hold the following size taps. 1/8' pipe- 1/4' pipe- 3/8' pipe 1/2' pipe 3/8' 7/16' 1/2' 9/16' 5/8' 3/4' and 7/8' Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send ... morean email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as
|
|
|
USED PROCUNIER TAPPING HEAD MODEL 4 SERIES14003 GOOD CONDITION 429
YOU ARE BIDDING ON ONE USED PROCUNIER TAPPING HEAD MODEL 4 SERIES14003 GOOD CONDITION DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Snow Tapping Head spindle # 97-66-5660 W/ 3 Collets #10 - 5/16 & 7/16
Spindle shaft is 1/2" 5" long with pilot. Pilot is.393. 5/8" long. Believe to be new.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f204306b4-0x108-
|
|
|
LYNDEX BT40 TAPPING,TAPPER, HEAD WITH 3/8 HOLDER BT-40
SquareTrade © AP6.0 LYNDEX BT40 TAPPER.TAPPING HEAD for retension knobs EXCELLENT CONDITION! I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616. For Credit cards& shipping,call Tina at 727-362-8318. WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider ... morefor the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 43 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! By adding my eBay Store to your Favorites. On Feb-18-09 at 02:10:42 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
0 to 1/4 Tapmatic model 30x tapping head w/0-8 &10-1/4 collet very little use
Almost New and it does come with both collets and has a 1/2" Jacobs shank on it! Made in Switzerland by Tapmatic. This is a Tapmatic Reversible Tapping Attachment& 4 Rubber Collet in good condition. Model# 30X Features: TAPMATIC- The World Standard For Manual Tapping Applications. Greater Thread Accuracy. Higher Production. Consistent Trouble Free Performance. Self-Reversing Tapping Units For Manually. Operated Drilling And Milling Machines. Pre-Selective Torque Drive: Prevents tap breakage. 1.75 x 1 Reverse Ratio: Increases productivity. Self-Feed: Ensures gauge perfect threads. Re-Entry Cushion: Eliminates cross-threading. Specifications: Shank: 1/2"Capacity: M1.5- M7/ 0- 1/4"Max. Tap. Capacity: 1/4" M7 Max. RPM: 2,000, Comes as shown in pictures.
|
|
|
TAPMATIC N/C-R00 CAT 40 TAPPING HEAD
TAPMATIC N/C-R00 TAPPING HEAD CAT-40 THIS TAPMATIC HEAD IS IN PERFECT WORKING CONDITION. IT HAS VERY LITTLE USAGE AND COSMETICALLY LOOKS ALMOST NEW. SIZE RANGE IS: 00- 4-40. M1- M3 TAPS
|
|
|
tapmatic model 1a tapping head.0 to1/4" with 1 collet.0-#8
head is noisy when entering& exiting holes.runs quiet.will combine shipping. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f2b58ff22-0xf9-
|
|
|
SPV / S * P * V Tapping Head Model SA-1E NC, 1" Shank, Used, Warranty
Title: SPV/ S* P* V Tapping Head Model SA-1E NC. 1" Shank, Used Description: Our Internal Stock# RACK2-2-9(06-06-13 RN) You are about to purchase the following item: 1- SPV/ S* P* V Tapping Head Model SA-1E NC. 1" Shank, Used Catalog# SA-1E NC 1" Straight Shank Arbor Floating Tap Holder Complete APPEARS TO BE IN EXTREMELY NICE CONDITION. This item wads taken directly from working service in good working condition. Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. We ship worldwide at great rates! ... moreSend us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Industrial Services. LLC 430 Cummings St NW Suite G Grand Rapids. MI 49534 Phone:
|
|
|
TAPMATIC BT 40 TOOL HOLDER w/ Tapmatic N/C-R00 Tapping Head, 5K RPM, M1-M3
TAPMATIC BT 40 TOOL HOLDER w/ Tapmatic N/C-R00 Tapping Head. 5K RPM, M1-M3
|
|
|
Procunier no3 style e tapmatic tapping head mt
This listing is for the following. Procunier no 3 model E tapping head for a drill press. Model ew cap. 1/4" 1/2" steel.1/4" 3/4" soft, 1/8" 1/4" pipe tap 1000 rpms max. 1 5/8" dia. cover clamp outstanding bargain! Tapping Attachment Cover Clamp Style Tapping Heads Mount directly to drill press quill for greater rigidity and accuracy. These models recommended for production runs. Available for practically every drill press. Enclosed drive for safety. STYLE ORDER NUMBER 1-E 11035-11099* 2-E 12035-12099* 3-E 13035-13099 4-F 14063-14099 ITEM COMES AS SHOWN IN PICTURE info for reference:
|
|
|
TAPMATIC "RDT" 1/4" CAPACITY TAPPING HEAD CNC MILLING BT-40 HAAS PULL STUD
TAPMATIC"RDT" 1/4" CAPACITY TAPPING HEAD CNC MILLING, TAPMATIC RDT 1/4" CAPACITY TAPPING HEAD WITH BT-40 SHANK. VERY GOOD CONDITION. Please check our other auctions for TOOLING. COLLETS, INSPECTION AND EQUIPMENT. THANKS! We will combine shipping to save you $$$$$ QUESTIONS CALL 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f2e639c40-0xfd-
|
|
|
Tooling Lot for 5 Axis Milling Machine, micro cut boring, tapping head etc...
Sale Item Information: Tooling for 5 Axis Milling Machine Tooling Includes: 8 micro cut boring adaptors- 3 tapping head adaptors- 2 shell mill adaptors- 2 MT3 adaptors- 4 MT4 adaptors- 2 1 1/2" end mill holders- 2 1 1/4" end mill holders- 3 1" end mill holders- 24 collet holders- 1 5X spindle speeder All holders and adaptors are BT50 taper. Used but in good working condition. Call or email us for more info and pictures. Shipping Details: Buyer is responsible for shipping from 180 Authier Street. Montreal, CANADA, H4M 2C6. Payment Details: We accept paypal. W ire transfer and c heck for payment. Taxes and duties may apply. Returns: In the unlikely event that a return is requested: Returns must be authorized and all returns must include all original items undamaged. In re-saleable condition, all original packaging including manuals, ... morewarranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back. Contact: Contact us with any questions at or at 1-514-937-3911. Privacy Policy: Rest assured your information will not be given. Sold, rented or loaned to any third party. Barer Engineering International 180 Authier Street Montreal. CANADA, H4M 2C6 Tel: 514) 937-3911 Fax: 514) 937-1697 E-Mail: Website: 96 800x600 Normal 0 false false false EN-US JA X-NONE 96 800x600 Normal 0 false false false EN-US JA X-NONE
|
|
|
Reynolds tapping head MT2 taper Untested
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Reynolds tapping head MT2 taper Untested u sed condition. It is missing one of its tags I have no way to test this. But it seams to go through the motion of working if you operate it by hand 10" long and about 4" in diameter acquired this lot from a recently closed machine shop Check all pics All sales final! Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
tapmatic 50x tapping head.6 to1/2" with 2 collets .free taps with buy it now
shows some wear in collet holder.works great.smooth& quite.1/2"shank.comes with 2 collets& 2 shop made wrenches.free taps& flat rate box shipping with"buy it now" only.ready to tap holes.
|
|
|
Tapmatic 30 TC/DC Tapping Head Tap Tapper Bridgeport Mill Drill Press
This is a used Tapmatic 30 TC/DC Reversible Tapping Attachment Head. Capacity is M1.5- M7 and 0- 1/4" 2000 Max RPM; Appears to be in good useable condition. Buyer pays all shipping; Ohio sales tax rules apply; Payment must be received within 5 days of close of sale; Sold AS IS.
|
|
|
Tapmatic 50 TC/DC Tapping Head 33JT Tap Tapper Bridgeport Mill Drill Press
This is a used Tapmatic 50 TC/DC Reversible Tapping Attachment Head. Capacity is M3- M12 and#6- 1/2" 1500 Max RPM; Appears to be in good useable condition. Buyer pays all shipping; Ohio sales tax rules apply; Payment must be received within 5 days of close of sale; Sold AS IS.
|
|
|
Zager 708-3839 Multi-Spindle Drilling or Tapping Head
Zager 708-3839 Multi-Spindle Drilling or Tapping Head. The fourth and fifth pictures are of different heads. You will receive one of the two. Seller's Location Note: Room C Lot 774(Rudd)
|
|
|
PROCUNIER / ETTCO TAPPING HEAD w / 1/2 INCH STRAIGHT SHANK
You are bidding on a used tapping chuck designed to be used on a drill press or milling machine to facilitate tapping operations. The nameplate somehow became dislodged through the course of time. The best information available as I can remember when I purchased it is the unit was manufactured by Procunier/ Ettco. THE DEVICE IS IN EXCELLENT WORKING ORDER AND COSMETICLY IN GOOD CONDITION(as I pamper all of my equipment) Included are the necessary chuck wrenches. THE INPUT DRIVE SHAFT IS ½ DIAMETER FOR EASY CHUCKING IN MOST EQUIPMENT. THIS IS AVERY SOPHISTICATED UNIT WITH A CLUTCH AND PLANETARY GEAR SYSTEM AND AN AUTO REVERSING DRIVE. ANY QUESTIONS AT ALL PLEASE CONTACT ME. GOOD LUCK and HAPPY BIDDING!
|
|
|
Command CAT50 Tapping Head C6T4-0003
Good condition CAT50 Tapping Head Holds Series 3 Adapters Command C6T4-0003 Posted with
|
|
|
JARVIS 0- ½” CLAMP MOUNT TAPPING HEAD- VERY GOOD!
JARVIS 0- ½ CLAMP MOUNT TAPPING HEAD- VERY GOOD! USED JARVIS ½ CLAMP MOUNT TAPPING HEAD INVENTORY# 3562 MODEL: TELCO 46501 SPECIFICATIONS: CAPACITY: 0– ½ HIGH SPEED 1:1 REVERSE MOUNT 2 ½. BUSHING 2 EQUIPMENT INCLUDED: COLLET: JACOBS MULTI SIZE RUBBERFLEX 0-1/4 CLAMP REDUCING BUSHING GOOD CONDITION FOB Our Floor CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained ... morefrom sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation. NORMAN MACHINE TOOL. LTD. CONDITIONS OF SALE: INSPECTION AND TEST EQUIPMENT Inspection& Test Equipment will be sold"AS IS" with a conditional return policy on a case by case basis. Please ask questions! The equipment's condition stated in the listing is accurate to the best of our knowledge. We do not specialize in these products and have no way of checking them beyond visual and some minor mechanical functions. We assume most of this equipment must be calibrated professionally. We feel the low prices we offer more than makes the equipment a great value! MDNA 30 DAY WARRANTY Every
|
|
|
ETTCO MODEL 4-B TAPPING HEAD, QUILL MOUNT CLAMP
ETTCO TAPPING HEAD MODEL 4-B 1/4" TO 5/8" CAPACITY IN STEEL EQUIPPED WITH SENSITIVE CLUTCH SERIAL#D1807 HAS#4E TAP CHUCK 1/4" TO 3/4" CHUCK CAPACITY FOR QUILL CLAMP MOUNTING THIS MODEL CAN FIT A DRILL PRESS WITH A 3-3/4" LARGE DIA. AND A 2-1/2" SMALL DIA NEAR THE DRIVE. THIS HEAD HAS BEEN WELDED AT THE 3-3/4" DIA. YOKE APPEARS TO BE GOOD. THE TAPER SHANK DRIVE DOG MUST BE PURCHASED FROM ETTCO FOR YOUR DRILL PRESS. WE WILL SUPPLY ALL THE INSTRUCTIONS AND PARTS INFO FOR YOU. NEW COST IS $1.184.00! PLEASE EMAIL WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5158 18# BUY MORE THEN ONE ITEM AND SAVE ON SHIPPING CHARGES! WE NOW SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. ... moreWE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours to keep. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Centinel Gear Driven Drilling and Tapping Head Cen 0693 Ratio 1:1, adaptable
Centinel Gear Driven Drilling and Tapping Head Cen 0693 Ratio 1:1. Adaptable to multiple machines. Seller's Location Note: Room C Lot 773(Rudd)
|
|
|
Procunier tapping head No1 morse taper 1$ no reserve.
Lightly used Procunier tapping head No 1 Morse taper shank. Comes with one 1/4 inch collet. Posted with
|
|
 |