|
UNIVERSAL 200 KWIK SWITCH TENSION / COMPRESSION TAPPING HEAD W/ 9 COLLETS - 126Z
UNIVERSAL 200 KWIK SWITCH TENSION/ COMPRESSION TAPPING HEAD WITH 9 COLLETS You are buying a used but nice Tapping head. It is a Universal 200 Kwik Switch tension/ compression style tapping head. Included are collets numbered: 6- 8- 10- 1/4- 5/16- 3/8- 7/16- 1/2- and 1/8 pipe. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. ... moreWe will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PROCUNIER #1 SERIES "E" REVERSING TAPPING HEAD 1/2" SHANK #10 COLLET INCLUDED
PROCUNIER#1 SERIES"E" REVERSING TAPPING HEAD 1/2" SHANK#10 COLLET INCLUDED, PROCUNIER#1 SERIES"E" REVERSING TAPPING HEAD 1/2" SHANK. INCLUDEDS#10 COLLET. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
procuinier4f tapping head w/collets
Nice procuinier 4F tapping Head very nice Excellent condition with 8 collets and wrenches
|
|
|
Type JSN Reversable Tapping Head
This is a used Type JSN Reversable Tapping Head with instructions. What you see in the picture is what you will get in the mail after winning the bid, any questions please email me. All parts are marked so that we are not sent a bad part back that is not ours for a return. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-141ce871f18-0x101-
|
|
|
Sugino STB-L108U Synchro Tapper - electrically operated automatic tapping head
The Synchro Tapper is an electrically operated automatic tapping system that quickly completes work cycles through its fast-action approach and reverse strokes. Acting independently. It complements any system using automatic drilling equipment. Features Faster production. Feeds are automatically changed from rapid approach lo pitch feed to reverse feed on retract. This speed cycle greatly increases production capacity. Capable of class 3 thread accuracy Feed rate is synchronized with tool rotation allowing thin or soft materials to be worked efficiently. Flexibility to meet your specifications Easy adjustment for tap diameter. Thread pitch and stroke length. Compact. Versatile set-up Compact size allows installation in small spaces and operation at any angle. Long stroke. A variety of attachments Simple changeover from single tip head to ... moremulti- tap heads allows flexibility for use in either small lot or large production runs. The tapping head was removed in fully functioning condition condition from a production environment. The mounted indicator light works. The tapper can be wired with or without the light. For more information. Please visit. Buyer pays actual freight from Milwaukee. WI 53208. If you have a preferred shipping method or want us to ship collect, we will do our best to accommodate you. Please let us know if you have any questions.
|
|
|
Lyndex Cat 50 Taper Tapping Head 1.220" id
Lyndex Cat 50 Taper Tapping Head 1.220" id ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 4841-S THERE IS A $15.00 HANDING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Dayton Drill Press Tapping Head Model 4X855 Made in USA
Dayton Drill Press Tapping Head Model 4X855 Made in USA This is a nice. Clean, lightly used drill press tapping head. It comes with the instruction book, both of the wrenches and an extra collet. PayPal preferred. gsrx_vers_508(GS 6.6b8(508)
|
|
|
Very Nice !!! H&G Eastern Machine Tool Tapping Head DMS Size 102 Screw Machine
Priced to sell. H&G Eastern Machine Tool Screw Corp. Tapping Attachment Model DMS Size 102 in very good working condition.
|
|
|
BILZ REVERSING TAPPING HEAD LOT #2
BILZ REVERSING TAPPING HEAD with hsk holder good working order GNCK 12.4 C-ESX 16/29.15 M4- M12 CAPACITY ER16 COLLET
|
|
|
Jarvis Torqomatic Tapping Head Capacity 5/16" - 5/8"
This offer is for a Jarvis Torqomatic Model 750 tapping head. Capacity 5/16" 5/8" Straight shank. This tool is in good usable condition with marks and imperfections that do not impair the functioning of this tool. Thank You for looking and good luck shopping
|
|
|
N/C-R Tapmatic Tapping Head on CAT 40 Collet Mount
Hello. You are bidding on a great condition Tapmatic N/C-R with BT-40 collet. Comes with the QC collet for 3mm shown. Please ask any question before bidding or buying.
|
|
|
VALENITE E-Z SET Buca 10T5 Boring Tapping Head Cartridge cutting tool 84b
Up for sale is this old vintage Valenite E-Z Set 10T5 ~ Boring Tapping Adjustable Head Cartridge. used. We often have more than 6 pictures with our listings. to see the 7th-12th picture. Please use the scroll bar to the right of the small pictures Please. See the pictures for the condition of this item. You may find something in the pictures that we didn't mention in the description, as we sell mostly older items. We do our best to show the defects, but sometimes they are missed. If you have questions, please ask, we respond frequently to our emails. We have a lot of vintage military and old tools in our store(Buy it Now! Check our feedback comments! We want to give you five star service. Please give us 5 star feedback or contact us. Policies: 1. We combine shipping. If you are buying more than one item. Please wait for your invoice to ... morepay. If shopping over more than one day, please drop us a note to let us know you are bidding on more items. We will send a new invoice each evening. We are professionals and each of our packages will be shipped with USPS(smaller ones) that have a delivery confirmation code. Check in your"My eBay" section to see when you package has been sent, we usually send the next day, but please give is 48 hours to send after payment has been made. 2. In order to protect our buyers as well as ourselves. We only ship to the address on the paypal transaction. Please do not ask us to ship to a different address. 3. Please do not ask us to change our auctions to do a buy it now. In order to be fair to all our clients. We do not do this. Please participate in our auction. 4. Please look below the photos in our auction to see if we have answered any buyer questions that may add to the description of the item. International Shipping Information: 1. Please ask for International Shipping Prices PRIOR to bidding and check in the auction to see if this item will be shipped internationally. 2. Any item that weighs 4 pounds or more and/ or sells for $50 or more. MUST be sent with Priority Mai
|
|
|
NEAL SKOKIE TAPPING HEAD MT2 LATHE ATLAS CRAFTSMAN LOGAN SOUTH BEND
NEAL SKOKIE TAPPING HEAD MT2 LATHE ATLAS CRAFTSMAN LOGAN SOUTH BEND Brand Neal Skokie Packaging In Original Box Condition See Descrpition Quantity 1 It looks to be frozen. I put the tommy bars in and I can barely turn it. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Valenite Tap 310750 WR Tapping Head Range 0 to 9/16"
Valenite Tap 310750 WR Tapping Head Range 0 to 9/16" ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4835-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
TM Smith ACTH/TA Tapping Head 312-52-216 1.220" id
TM Smith ACTH/TA Tapping Head 312-52-216 1.220" id ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4834-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Smith Tool 100L Tapping Head .750" id Dia
Smith Tool 100L Tapping Head.750" id dia ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4833-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
SMP Tapping Head 1" Shank x 5/8" id Capacity
SMP Tapping Head 1" Shank x 5/8" id Capacity ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4832-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Procunier Tapping Head 13003 Model 3-E Size 3 MT Shank
Shank Type, Taper Shank, Taper Size, 3MT, Minimum Tap Capacity(Inch) 10, Minimum Tap Capacity(mm) M6, Maximum Aluminum Tap Capacity(Inch) 3/4, Maximum Aluminum Tap Capacity(mm) M18, Maximum Mild Steel Tap Capacity(Inch) 1/2, Maximum Mild Steel Tap Capacity(mm) M12, Quick Change(Yes/No) No, Series, E, Maximum RPM, 1000, Body Diameter(Inch) 5-7/8, Model Number, 3E, Includes, 2) Wrenches,
|
|
|
R&L Tools No. 3 R and L Thread Tap Tapping Head for Automatics 1-1/2" Straight
Up for sale here is a R&L Tools No. 3 R and L Thread Tap Tapping Head for Automatics 1-1/2" Straight Shank. Holds 1-1/4" round tap shanks. Used in good condition. Feel free to ask any questions. SCT2934
|
|
|
R&L Tools No. 2 R and L Thread Tap Tapping Head 4 Automatic 1" Straight Shank
R&L Tools No. 2 R and L Thread Tap Tapping Head 1" Straight Shank Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos and described is the items you will receive. Items will be sent as soon as payment is received. Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please subscribe to my eBay Store& Facebook page For More Great deals and offers At Hanmores Tool Shed You Will Receive a friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
Hardinge Tt 3/4 Tapping Head + 7 Collets
Hardinge Tt 3/4 Tapping Head + 7 Collets. Please email any questions. 3/4 shank. Posted with
|
|
|
TAPMATIC 50 TC/DC TAPPING HEAD 2MT SHANK
TAPMATIC 50 TC/DC TAPPING HEAD 2MT SHANK COMES WITH 1 RUBBER FLEX COLLET
|
|
|
Devlieg- SPV Tapping Head SA-2E
This is a SPV tapping head with a# 4 morse taper shank. This was made in Sweden and works very nicely. Posted with
|
|
|
Procunier E3 Tapping Head Model Style E Size 3 Reversing Tap Tapper Drill Press
Used tapping head. Note small chip in top cover shown in 4th picture. Doesn't affect operation. 3/4" soft material capacity 1/2" steel capacity Item# 8035 Location: 11-4
|
|
|
3 MORSE TAPER SHANK REVERSIBLE TAPPING HEAD drill press tool TAPMATIC 70X
good used reversible tapping head Tapmatic USA 70X 3 MT shank complete with 3 collets and wrench capacity#10- 3/4" or M5- M18 functions properly when turned by hand please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2- Nice Lyndex BT35 Tool Holders: Shell Mill & #1 Tapping Head Collet Matsuura
These tool holders are from a small shop that closed in my area. There are no surprises here. I have 90 BT35 tool holders to sell. I think they are from a Matsuura. In addition to BT35's. Check out my other lots I have over 300 tool holders to sell. I will definitely combine shipping where ever possible. This is a nice lot of: 1) Lyndex#1 Tapping Heads with Collet and Pull stud. Part Number(SKU) B3505-0562, Tap Range- Hand#0-9/16" Tap Range- Pipe 1/8" System#1, 1) Lyndex Face Mill Holder with 3" Kennametal Indexable Shell Mill Model KSSISR300SD430C4 Coarse Pitch 3" Diameter Cut(4) Removable Inserts(appear complete and in good shape) Max RPM 16.700. These are nice used tools. I have a regular store so if you are interested place a bid or buy it now. I regularly remove items that have sold outside of eBay. Buy with confidence. ... moreThere is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Erickson Tapping Head
For more information about this item. Please call(909) 590-4327 13338 Monte Vista Ave. Chino. CA, 91710 Hours: 8:00 AM- 5:00 PM
|
|
|
Tapmatic Model N/C-R1 No.10 - 1-1/2in Tapping Head
Tapmatic Model N/C-R1#10-1 1/2" Tapper(M4.5-M12) Maximum RPM 2000. Collets are not included, Has 1" shank.
|
|
|
TAPMATIC SPD3 SELF REVERSING TAPPING HEAD W/ CAT 40
TAPMATIC SELF REVERSING TAPPING ATTACHMENT MADE IN U.S.A. MODEL SPD3 1/4" OR M7 CAPACITY. 2.000 MAX. RPM CAT 40 ADAPTER Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. FREE USPS Priority Mail shipping with tracking* STOCK NO. A62 Thanks for looking!
|
|
|
Tapping Head w 1" Shank 8" OAL TMS-ACTH/TA
Tapping Head w 1" Shank 8" OAL TMS-ACTH/TA Uses the larger#2 tapping collets. No collets Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE BEAVER TAPPING HEAD NO.5 MORSE TAPER SHANK NO.B-16836
BEAVER TAPPING HEAD MODEL NO.B-16836. NO.5 MORSE TAPER SHANK. Very good used condition. Actual item pictured. Payment due within 5 days of purchase. Check. M/o, and PayPal accepted. $15.00 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
VERY NICE ETTCO HIGH SPEED SENSITIVE TAPPING HEAD ATTACHMENT NO. 4-B
VERY NICE ETTCO HIGH SPEED SENSITIVE TAPPING HEAD ATTACHMENT NO. 4-B Prev Stop Play Next You are bidding on an Ettco High Speed Tapping Attachment. Model: 4-B. This is a very nice tapping head in excellent conditon and it is fully guaranteed. Internal Parts Are Oil-Cooled And Lubricated. Tap Capacity: 1/4" Through 5/8" In Mild Steel. Maximum Speed: 1500 RP M Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $19.90 within the Continental USA. Any questions? Email us or call 1-800-826-3433 9 to 5 EST. NO RESERVE Please click here to see my other auctions.
|
|
|
1-1/2" Straight Shank Tap Tapping Head for ACME Automatic Screw Machine
Welcome! Up for sale is a 1-1/2" Straight Shank Tap Tapping Head for ACME Automatic Screw Machine. Unknown brand. It holds 1-1/2" straight shank taps. It includes a 1-3/4" 18 UNS thread tap with a round adapter on the square tap shaft. Used in good condition. Feel free to email any questions! SCT2918.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14355f5d446-0xe3-
|
|
|
Speedycut ST-0 Tapping Machine with Multi-Head
Speedycut Model ST-0 tapping machine with a multi-head unit. Inpection in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
PROCUNIER MODEL E SIZE 3 REVERSIBLE TAPPING ATTACHMENT HEAD 3MT SHANK
Procunier Reversible Tapping Attachment Head Model E Size 3 3MT Shank Includes 1/2" Johnny Bar Condition AS IS. Needs Work On Reversing Clutch No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT ... morepay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds. Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To rece
|
|
|
BILZ/TIC Tapping Head Model DSPL 12
TIC Tapping Head Model DSPL 12 Nice shape! TIC Tapping Head Model DSPL 12 Handles Sizes 6. 8, 10, 12, 1/4, 5/16, 3/8, 7/16, 1/2 Inch taps. 1" Straight Shank Type DSPL For use on drilling and tapping machines• Tap is securely clamped on both the shank• Wide clamping range of this unit is operated adjustment screw within the body of the unit• Adjustable safety clutch prevents tap breakage• Torque system ensures minimum wear on• Tap is automatically locked on return after• Floating system compensates for misalignment• Length compensation acts on tension and between the machine and the tapping chuck• Can be used on machines with both manual through the built-in exact zero position
|
|
|
PROCUNIER Tapping Head Series 13003 Style E Tapping Attachment #3 Morse Taper
Up for Auction Procunier Tapping Head 13003 Style E Tapping Attachment. 3 Morse Taper. 1000 Rpm Max. This unit has hardly been used and in good working condition. Was used for proto-type work. Project got canceled. Any questions please contact Mark. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143654a2ef9-0xfd-
|
|
|
TACO HR-4 9/16" - 1-1/8" 14-30mm JT4 Mount Reversible Tapping Head Attachment
TACO HR-4 Reversible Tapping Head Attachment JT4 Taper Shank 9/16" Minimum Tap Capacity(14mm) 1-1/8" Maximum Tap Capacity(30mm) HR Series Right or Left Hand Tapping Without Modification Designed for Both High Production and Precision Tapping on All Manually Operated Drilling and Milling Machines. Gently Used- Perfect working order- buy it used and save yourself hundreds. What you see in the photos is what you get. Free shipping. I will ship this item using UPS. All tools and attachments will be bubble wrapped and shipped insured. I do not ship outside the USA. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143654a2f2a-0x101-
|
|
|
Tapmatic 600 non reversing tapping head MT3 Morse Taper 3
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Tapmatic 600 non reversing tapping head MT3 Morse Taper 3 Good used condition. But untested Looks like it is in working condition operating it by hand Check all pics S old AS IS. All sales final! Used the shipping calculator for shipping cost. Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
Tapping Head w MT 2 Taper Shank 5 1/2" OAL TMS-ACTH/TA
Tapping Head w MT 2 Taper Shank 5 1/2" OAL TMS-ACTH/TA Uses the#1 tapping collets. No collets Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Tapping Head w 1" Shank 6 1/2" OAL TMS-ACTH/TA
Tapping Head w 1" Shank 6 1/2" OAL TMS-ACTH/TA Uses the#1 tapping collets. No collets Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CNC CAT 40 Tapping Head Procunier series 15001 Model 1TT for Haas Fadal Matsura
CAT 40 CNC tapping head Procunier series 15001. Model 1TT Tru-Tap. Please email me with any questions. Thanks for looking!
|
|
|
Desoutter tapping head
Desoutter tapping head used very little. OAL 6 inches. 2 inch diameter base. 42101 Jacobs chuck. Everything turns free, no issues.
|
|
|
TAPMATIC R7 TAPPING TAPPER HEAD
TAPMATIC R7 TAPPING TAPPER HEAD TAPMATIC R7 TAPPING HEAD WITH WRENCHES UNIT IS IN NICE USED CONDITION COMES AS SHOWN SHIPPING TO LOWER 48 STATES ONLY PAYPAL ACCEPTED. PLEASE ASK FOR OTHER PAYMENT OPTIONS IF NEEDED. KANSAS RESIDENTS TO PAY 8.65% SALES TAX SHIPPING WILL BE BY USPS OR UPS UNDER 150LBS. OVER 150LBS WILL NEED TO BE SHIPPED FREIGHT. ALL FREIGHT WILL BE ARRANGED BY THE BUYER. ALL DAMAGES FROM FREIGHT WILL BE THE RESPONSIBILTY OF THE BUYER AND FREIGHT COMPANY. PLEASE INQUIRE FOR ALASKA HAWAII OR OVERSEAS SHIPPING RATES AND ADDITIONAL FEES. PLEASE CONTACT US FOR ANY QUESTIONS YOU MAY HAVE. We evaluate used items based on their external condition. Power up test, self-testing(if applicable) and basic functionality. Any observed problems are noted in the listing. We do not test new-in-box items. We cannot test or guarantee full adherence ... moreto published specifications. We allow a 7-day right-of-inspection. The sale price less 15% restocking fee will be refunded for items shipped back in the original condition within this time frame. The return shipping must be by traceable and insured means. The buyer will be responsible for all shipping costs. If we have inadvertently misrepresented an item or have overlooked a functional defect. We will always work to ensure buyer's satisfaction. All claims must be made within 7 days upon receiving the shipment. ALL ITEMS SOLD AS IS WHERE IS. NO WARRANTY IS GIVEN OR IMPLIED. WE TEST OUR ITEMS FOR BASIC FUNCTIONALITY AND OR POWER UP TEST. PLEASE ASK ANY AND ALL QUESTIONS ABOUT ITEM BEFORE BIDDING OR BUYING. ITEM IS AS PICTURED AND AS DESCRIBED. PLEASE CONTACT US BY EMAIL AND WE WILL RESPOND WITHIN 24HRS.
|
|
|
Tapmatic SPD-5 Tapping Head on a MT#3 Shank
Good condition Tapmatic SPD-5 tapping head#6- 1/2" capacity on a MT#3 shank. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
PROCUNIER TAPPING HEAD SERIES 12002 MODEL 2 Serial # E
This auction is for a Procunier Tapping Head. Morse tapper shank. Series 12002. Model 2, Serial number E. Made in USA. This head is used and it shows it cosmetically. It still works and operates as it should. GOOD LUCK!
|
|
|
Procunier Size 2 Reversing Tapping Head #2 MT
Used- Good working order- Procunier Size 2 Reversing Tapping Head#2 MT. Capacity 5/16" in Steel. No Collets 3546 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Procunier Style A #2, Reversing Tapping Head, 3/16 to 7/16 Taps #3MT
Used- fairly Good Condition- Procunier Style A#2. Reversing Tapping Head, 3/16 to 7/16 Taps- 3 Morse Taper. Missing reaction arm(7/16-20 thread) 3545 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Procunier 4F Tapping Head 3 Morse Taper W/11 Collets 3/8" to 1" and 3 Pipe mint
Came from shop closing in Exl condition. Tested with 3/4"10 Tap. Collets are 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1/4" Pipe- 3/8" Pipe- 1/2" Pipe
|
|
|
MACHINIST TOOL SENSITIVE TAPPING HEAD ATTACHMENT BY ETTCO-EMRICK LATHE MILL
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS SENSITIVE TAPPING HEAD ATTACHMENT ETTCO-EMRICK SIGNS OF WEAR FROM USE BUT ALL ARE IN GOOD WORKING CONDITION ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO ... moreEMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
Procunier No1E Tapping Head W/4Collets, #6-#8-#10-1/4, W/Rare 3/8" ST Shank,
Tested and works good. Cap 0 to#10 Tap 1/4" is for Brass or soft material
|
|
|
Tapmatic Tapping Head R5 &. 30 X
You are bidding for 3 Pcs. Tapmatic Tapping Head: 1- R5#6-1/2" M3-M12. Maximum RPM 1.500 with 1 collet. 1-30X Reversible tapping attachment Cap. M1.5-M 7 No. 0-1/4" RPM 2000 1- 30X tapper( missing collet screw nut) 3 wrenches& 1 can tapping oil These are in excellent condition Posted with
|
|
|
Ettco No. 2& 2-B Sensitive Tapping Head With 3 Ettco No. 2E Tap Holder Body
You are bidding for 2Pcs. Ettco sensitive tapping Head. Model# 2& 2B Also 3 Brand New Ettco No. 2E Tap Holder Body with 2 spring rubber collets& 5 wrench Posted with
|
|
|
Procunier Tapping Head Model 1 SN. E
You are bidding for Procunier Tapping Head Model 1 SN. E Series 11002 With 19 Collets-2 Wrenches. can tapping oil. This unit is in excellent condition. More tapping heads available) check my ebay sight. Posted with
|
|
|
COMMANDER FULL RANGE MULTI TORQUE TAPPER TAPPING HEAD
COMMANDER FULL RANGE MULTI TORQUE TAPPER TAPPING HEAD Click Images to Enlarge COMMANDER FULL RANGE MULTI TORQUE TAPPER TAPPING HEAD 1/4" CAPCITY COMES AS SHOWN IN PHOTOS MADE IN U.S.A SERIAL NO: 78T34 TOTAL LENGTH: 20" NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 12 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard ... morepacking A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a
|
|
|
Procunier # 3 Tapping Head W/13 Collets 1/2" Shank
Checked with 5/16& 3/8" tap and works good. Collets are#8- 10- 12- 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 1/8" pipe& 1/4" pipe
|
|
|
CLEAN Tapmatic NCR50 Tapping Head Cat50 Shank. 1/2" Cap. Tap Collet CNC VMC HMC
M4.5–M12#10–1/2 in. 2500, Rubber Flex#22000 Series, CAT 50, These tool holders are from a large Wisconsin based manufacturing company in Illinois. They moved to a new building and I purchased their remaining tool crib. There are no surprises here. Very clean Cat50 Tooling This plant was running Haas. Mori Seiki, Toyoda, Makino and Fadal vertical machining centers and horizontal machining centers. Check out my other lots I have over 300 tool holders to sell. I will definitely combine shipping where ever possible. Tapmatic NCR50 Tapping Head Cap: M4.5–M12#10–1/2 in. 500 RPM Max Rubber Collets#22000 Series. Cat50 Shank with Pull Stud. I reserve the right to end a listing if there is not a bid. If a bid has already been placed I will not end a listing early. If you are interested in Bidding bid early to prevent the item from being sold outside ... moreof eBay(I have a used store) Thanks I am selling a ton of other collets. Make sure you check out my other listings. I will combine shipping whenever I can! Thanks for looking. Good luck on your eBay searches. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
Telco Jarvis tapping head #10 capacity INCOMPLETE
Incomplete: collet chuck issues. Missing nut. And maybe other parts. Telco Jarvis Tapping Head#10 capacity Turns smoothly both forward and reverse. Sorry. We cannot ship internationally.
|
|
|
MACHINIST MILL LATHE TOOL Dumore Series 28 Drill and Tap Tapping Head Machine
SINCE THIS ITEM IS TOO LARGE. SHIPPING ARRANGEMENTS ARE TO BE MADE BY THE BUYER. THE MILL CAN ALSO BE PICKED UP. SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, The cord has been cut. I did not test it. Sold as is. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR ... morePURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. BT a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-143c99da409-0x102-
|
|
|
Tapmatic 50x Auto reversing tapping head
Tapmatic 50X Auto Reversing Tapping HeadExcellent condition. Cpmplete working unit, less allen wrench.two collets, one is installed, both wrenches1/2 straight arbor for mounting in chuck or collets. Head mounting is Jacobs 33 if you remove the 1/2" arbor.don't use it, don't need it
|
|
|
PROCUNIER MODEL 2 TAPPING HEAD WITH COLLETS - 132K
PROCUNIER MODEL 2 TAPPING HEAD You are buying a used but nice Procunier#2 tapping head. It comes with a#10- 8- 1/4" 3/8" 5/16" collets. It is a 12002 series with serial number"E" Buy with confidence knowing that our company inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not ... moreas described. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the differnce to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving feedback. CONTACT US JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listi
|
|
|
spi kwik change tapping head Z-24 with 5/8 spi 75-927
nikken-conventry kwik change Z-24 with SPI 5/8 holder 75-927. Very good condition very low miles:
|
|
|
PROCUNIER #1 TAPPING HEAD 5/8" SHANK W/TAP COLLETS
PROCUNIER#1 TAPPING HEAD 5/8" SHANK W/TAP COLLETS, PROCUNIER#1 TAPPING HEAD WITH 5/8" SHANK. COLLETS INCLUDE#8, 10 + 1/4" GOOD CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-143d379509f-0xff-
|
|
|
PROCUNIER #1 TAPPING HEAD 1/2" SHANK + TAP COLLETS
PROCUNIER#1 TAPPING HEAD 1/2" SHANK + TAP COLLETS, PROCUNIER#1 TAPPING HEAD WITH 1/2" SHANK. COLLETS INCLUDE#6, 8, + 1/4" GOOD CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
PROCUNIER MODEL F TAPPING HEAD, SIZE 4, 3MT SHANK w 3/8 collet
Procunier Model F. Type 4 Tapping Head, 3MT Shank w/ 3/8 collet
|
|
|
Procunier 2E Tapping Head with 1/2" imput shaft W/8 Collets
With#6- 8- 10- 4" 5/16" 3/8" 7/16" and 1/2" Works good opened up cleaned and tested with a 3/8" 16 tap
|
|
|
Asquith 3A Tapper Tapping Head Morse Taper #5 Shank MT5 5MT w/ 5 Collets, Rack,
Up for sale here is an Asquith 3A Tapper Tapping Head Morse Taper#5 Shank MT5 5MT w/ 5 Collets. Rack, Wrench. Made in England. Includes spanner wrench. Collet rack, allen key, instructions, and 5 collets; 3/8" 2pc 1/2" 5/8" and 1-1/4. Used in good condition. Feel free to ask any questions. SCT3268
|
|
|
BT 50 TAPPING HEAD TEN / COMP TOOL HOLDER - NIKKEN - 132Z
BT 50 TAPPING HEAD COMPRESSION TOOL HOLDER. You are buying a used but good tool holder. This tool holder has a BT 50 shank. It is a tension head compression style tapping head and it holds a#2 style Bliz quick change collet. It is made by NIKKEN. Buy with confidence knowing that our company inspects. Cleans and tests(when possible) most tools prior to each sale. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus ... moreshipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the differnce to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving feedback. CONTACT US JOSEPH D'AMICO 440-773-9477 C
|
|
|
BT 40 TAPPING HEAD TOOL HOLDER - #2 BILZ Q/C - RIDGID - 133C
BT 40 TAPPING HEAD TOOL HOLDER. 2 QUICK CHANGE BILZ COLLET. You are buying a used but good tool holder. This tool holder has a BT 40 shank. And it holds a#2 Bilz style collet. This is a rigid style tapper Buy with confidence knowing that our company inspects. Cleans and tests(when possible) most tools prior to each sale. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as ... moredescribed. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving feedback. CONTACT US JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listin
|
|
|
DEAL! CST TAPMATIC NCR25 TAPPING ATTACHMENT / HEAD - 1/4" OR M6 MAX. CAPACITY
Made in the U.S.A. by CST Tapmatic This is a reversible tapping attachment in good used condition. This tapping head may be missing a rotating collar that catches the spring loaded latch on the side.we are not familiar enough with this head to know if this part is essential for proper operation.please examine the photos carefully. Model Number: NCR25 Specifications: Max. Cap. 4-1/4" M2.5-M6 3500 RPM Mounting Shank: 1" diameter x 1.5" long Includes the tap shown in the pictures and one Rubber Flex Collet(the tap measures 0.140" diameter) Approximate Overall Dimensions: 5.85" x 3.1" x 2.25" diameter(these dimensions do not include the tap or side lever) Comes as shown in pictures.
|
|
|
DEAL! TAPMATIC NCR0A TAPPING ATTACHMENT / HEAD - 1/4" OR M7 MAX. CAPACITY
Made in the U.S.A. by Tapmatic This is a reversible tapping attachment in good used condition. Model Number: NCR0A Specifications: Max. Cap. 1/4" or M7 3000 RPM Max. Mounting Shank: 1" diameter x 1.5" long Includes one Jacobs Rubber Flex Collet marked 2.5-4.5& 100-176 Approximate Overall Dimensions: 5.5" x 3.25" x 2.25" diameter Comes as shown in pictures.
|
|
|
S.P.V. SAR-150 TAPPING HEAD 1/2" shank....tapmatic , procunier, semi auto
This is a S.P.V. head in Excellent condition. Adjustable clutch, reversing. Holders are.255, 317, 375 I.D. Straight shank is stepped, 1/2" 5/8" diameters. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-143f9bd841f-0x102-
|
|
|
SPV MODEL SA-1E TENSION & COMPRESSION TAPPING HEAD W/ 3MT SHANK
SPV Tension& Compression Tapping Head w/ 3MT Shank Model SA-1E For Use with SPV T-12 Tap Collets 3MT Shank Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end ... morenotice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Tapping Head (drill,mill,lathe,gringing,CNC)
Here is a used tapping head for a cnc or automatic scruw maching. Shaft is 5/8" The hole is 1/2" Payment must be payed with in 48 hours from the end of action. Shipping in the US only.
|
|
|
Ettco Model 1B Tapping Head
its almost new
|
|
|
MACHINIST LATHE MILL Commander Tapping Head Attachment
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
|
Tap Tapping Head ATTACHEMENT NATIONAL ACME GRIDLEY Automatic Screw Machine
Tap Tapping Head ATTACHEMENT FOR ACME 4- 41227 Automatic Screw Machine Additional sizes shown in photos Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive all items are sent same day if bought and payed for before 12.00 noon Monday- Friday Before 10Am Sat if not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service and Great deals Thank You For Viewing
|
|
|
Rigid Versatapper Mt2 Tapping Head Southbend Atlas Etc Lathe Milling Drill Press
Functional tapping head. Body reads: Rigid supreme versatapper no. 6200 cap. 10-1/2" The nose reads: tc-200t2 cap 5/16-5/8(where the tap is held in place) Posted with
|
|
|
Procunier Tapping Head Model MD Series 30048 Free shipping!!!!!
This is a used Procunier Tapping& Drilling Series 30048 Model MD Serial No. 2500. We do our best to list items to the best of our ability. And sell all items in as is condition. Free Shipping!
|
|
|
tapmatic tapping head.with 1 collet.0-8 .r8 shank.
well used.tested.Works fine. ready to tap holes.will combine shipping.
|
|
|
PARLEC NUMERTAP 700 TAPPING HEAD W/ 3/4" ADAPTER NO.4 MORSE TAPER SHANK
PARLEC TAP DRIVER SYSTEM 700 NUMERTAP NO.4 MORSE TAPER SHANK. 3/4" ADAPTER INCLUDED. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. LOT"A" Thanks for looking!
|
|
|
CAT 40 PARLEC NUMERTAP 700 TAPPING HEAD W/ 5/16" & 3/8" ADAPTERS
PARLEC TAP DRIVER SYSTEM 700 NUMERTAP CAT 40 SHANK. 5/16" 3/8" ADAPTERS INCLUDED. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. LOT"A" Thanks for looking!
|
|
|
TAPMATIC N/C-R1 #10-1/2" M4.5-M12 2000 RPM SELF REVERSING TAPPING HEAD
TAPMATIC N/C-R1#10-1/2" M4.5-M12 2000 RPM SELF REVERSING TAPPING HEAD TAPMATIC N/C-R1#10- 1/2" M4.5-M12 2000 RPM SELF REVERSING TAPPING HEAD PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
SPV tapping head chuck MT 3
Here is something that I know very little of. I know that it has a morsetaper#3 shank. It has some rust stains on the body but I think that it was used very little or none at all. Some scratches on the body from storage. I think it is used for tapping. It is made in Sweden.
|
|
|
SPV TYPE SA-1B TAPPING HEAD W/ COLLETS SPI DIXI QUICK CHANGE SHANK
SPV TAPPING HEAD(10) COLLETS INCLUDED. SPI/ DIXI QUICK CHANGE SHANK. Very good used condition. As pictured. Wood storage case included. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
1/2" Tapmatic Tapping Head, type 50X; #6 to 1/2" Capacity & 1/2" Shank
Offered here is a 1/2" TapMatic Tapping Head. Type 50X. The tapping capacity is rated#6 to 1/2" This head has a 1/2" mounting shank. In testing the head by hand it appears to function as it should and looks to be in good condition. Please note, there are no collets for the head, they would need to be obtained by the successful bidder.
|
|
|
tapmatic tapping head.with 2 collets.10 to 3/8 & 3/8 to 1/2. 3/4"shank.tested.
tested with a 10-32& a 5/8"11.very good condition.runs smooth& quiet.drives a large tap with no problem. ready to tap holes.will combine shipping. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1441d0b447a-0x100-
|
|
|
tapmatic spd7 quick change chuck tapping head.10 to 3/4".1"shank.tested.
tested with a 1/2"14 pipe tap.has a ticking noise when running.drives a large tap with no problem.comes with a bilz 1/2" pipe tap holder.
|
|
|
PROCUNIER TAPPING HEAD PARTS 1 GEARS MACHINE SHOP TOOLMAKER TOOLS
HELLO- YOU ARE PURCHASING THE PICTURED PROCUNIER TAPPING HEAD. IT IS USED. IT IS LABELED: I SHIP 95% OR MORE OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. CALL 937-475-3068 IF YOU MUST HAVE SAME DAY SHIPPING TO CONFIRM THAT I SEE YOUR PURCHASE. PLEASE SEE MY FEEDBACKS THAT ARE 100% POSITIVE AT THE TIME OF THIS LISTING ON OVER 8050 FEEDBACKS. PLEASE VISIT MY STORE FOR HUNDREDS OF MACHINE SHOP ITEMS. TAPS. DRILLS, INSERTS, CAT 40 CAT 45 CAT 50 TOOL HOLDERS BOTH SOLID AND COLLET TYPE. COLLETS, THREAD RING AND THREAD PLUG GAGES AND MUCH MUCH MORE! I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. PLEASE SEND ANY QUESTIONS YOU HAVE. UL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1442be16672-0x101-
|
|
|
Tapmatic 50X Reversible Tapping Head Attachment Tool
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Tapmatic 50X Reversible Tapping Head Attachment Tool DESCRIPTION: ~ Up for bid is a good working Tapmatic 50X reversible tapping attachment cap M3-M12. RPM 1500. gsrx_vers_526(GS 6.6.6(526)
|
|
|
Jarvis Tapping Head For Milling Machine Drill Press Or Lathe
Jarvis Tapping Head SN-188-576 Jarvis tapping head. Please look at all the pics as they are part of the description. Please ask any question's you may have and I will get back to you ASAP. I tested this and it works well. It's MT2 taper and can take 0-10 taps. You get what you see in pics and your buying it as is no returns sorry. Thanks and happy bidding Posted with
|
|