|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$6.85 Shipping Condition: New Location: Kenilworth, United States Not a small size hand drill 1/2 chuck.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Product Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims.
Buy It Now
$62.40 Shipping Condition: Used Location: Arcola, United States This is the counter shaft assembly for the logan model 200. 210 and I am sure many others. This comes with the belt guard as well. The cast pulley cradle ... morehas been replaced by a very nice solid steel unit made by a machinist and it has roller bearings. This is much better than the original style cradle which usually is broken and brazed back together and that is why this one has been upgraded. The counter shaft motor pulley is not original and is 7" in diameter. This is complete with motor mount too. I prefer to have this picked up due to its weight and size but if you are willing to pay shipping I will pack it up for $10.00 plus shipping cost. Good luck and Happy bidding!
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Logan 400 Lathe Service. Parts Manual.
$20.50 Shipping Condition: Used Location: Orange, United States
Buy It Now
$7.84 Shipping Condition: For parts or not working Location: Temecula, United States Logan 2555 carriage part LA-1169 BRACKET ONLY 3 mounting screws included. The screw is included but it is slightly bent and very worn.
Buy It Now
$7.55 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
$10.15 Shipping Condition: New Location: Berrien Springs, United States NEW ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 3C AND 3AT COLLET DRAWTUBE USA 11 3/4 Click to Enlarge Click to Enlarge NEW FROM MYMACHINESHOP.NET USA MADE ... more3C AND 3 AT COLLET DRAWTUBE. 3/4 O.D. AND 9/16 I.D. SEAMLESS STEEL TUBE WITH SPECIAL COLLET THREADS IN ONE END. FINISHED AT 11 3/4 LONG. CUSTOM SIZES UPON REQUEST. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
$24.99 Shipping Condition: Used Location: Lombard, United States Shelton metal lathe steady rest for the 10 inch model. Part#L575 on the casting. There are two 1/4-20 threaded holes on the bottom where I mounted an ... moreadapter for use on my 12 inch Clausing. Not a problem for this and I no longer need it as I was able to obtain the Clausing steady rest recently. Like new. Almost no wear on the jaws. Free shipping USA only.
Buy It Now
$6.90 Shipping Condition: Used Location: New Hyde Park, United States Logan 10" Metal Lathe Apron Bevel Miter Mitre Gear Assembly Set. Condition is Used. Shipped with USPS Ground Advantage.
$8.95 Shipping Condition: Used Location: Romulus, United States Excellent Condition- Original Logan 32 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, ... more2 1/8" diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States The shaft is worn where the outside bushing is. It can be used as is or I could turn down the end and use a different size bushing. ( depends on your ... moredevice ). (Preferred & cheapest).
Buy It Now
$4.95 Shipping Condition: Used Location: Troy, United States It has a heavy cast iron bed with pyramidal rails 4 1/4" apart center to center. The bed is 6" from front to back and has a 2 3/8" gap between bed rails. ... morePulley exactly as pictured. Marked 2 1/2" A 106.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of?? 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
Buy It Now
$8.85 Shipping Condition: New Location: Kenilworth, United States
Buy It Now
$6.85 Shipping Condition: New Location: Kenilworth, United States
Buy It Now
Free Shipping Condition: New Location: Dayton, United States (Photo 3: Example of Model D lathe the part fits. lathe the part fits. The lead screw exits from the described gearbox. The Idler Bevel Gear runs between ... morethe two lead screw bevel gears and is mounted to the inside of the reverse gear case.).
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States The early 9" lathes used a knob instead of a handle - not sure if this can replace the knob.
Buy It Now
$4.65 Shipping Condition: Used Location: Nashville, United States As shown, in overall good used condition.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States PULLEY HAS SMALL PEACE MISSING PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST ... moreTO ANSWER ANY QUESTIONS FREE SHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING/UPS GROUND
Buy It Now
$4.50 Shipping Condition: New Location: Cross Plains, United States Will not mark or Gaul spindle threads.
Buy It Now
$5.49 Shipping Condition: For parts or not working Location: Temecula, United States Logan metal lathe model 2555 VH It is in good condition with no chips or cracks.
Buy It Now
$100.70 Shipping Condition: Used Location: Westland, United States REMOVED FROM WORKING LATHE WE ARE PARTING OUT. LATHE HAS BEEN SITTING FOR A COUPLE YEARS AND WE NEED CLEANED. PULLEY HAS MINOR SURFACE RUST THAT WILL ... moreCOME OFF EASY WITH STEEL WOOL. ANY QUESTIONS OR NEED MORE PICTURES PLEASE ASK. SEE PICTURES FOR CONDITION. This Logan 10" Lathe Model 850 Headstock is a great find for metalworking enthusiasts. The machine has a manual control system and is made of cast iron. Its turret lathe type makes it perfect for precision work. The lathe also has a swing over bed of 10 inches. It is a must-have for those in the metalworking industry.
Buy It Now
$15.99 Shipping Condition: Used Location: Temecula, United States Logan 12" 2555 VH Saddle Casting Good condition. Needs cleaning.
Buy It Now
$10.95 Shipping Condition: Used Location: Troy, United States It has a heavy cast iron bed with pyramidal rails 4 1/4" apart center to center. The bed is 6" from front to back and has a 2 3/8" gap between bed rails. ... moreWear and Tear dust and dirt rust and pitting and paint loss in good working condition.
Buy It Now
$9.95 Shipping Condition: Used Location: Troy, United States It has a heavy cast iron bed with pyramidal rails 4 1/4" apart center to center. The bed is 6" from front to back and has a 2 3/8" gap between bed rails. ... moreWear and Tear dust and dirt rust and pitting paint loss but in good working condition.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Logan Lathe
Buy It Now
$10.60 Shipping Condition: For parts or not working Location: Eastpointe, United States Selling a used half nut assembly pulled from a Logan 820 toolroom lathe. In fair usable condition with normal wear and tear. Selling this FOR PARTS ONLY. ... moreSaw decent wear in its life and tooth engagement is shallow. Measured to be about 0.02 deep threads. Still grabbed the lead screw on my machine and carried the apron. Selling this half nut assembly used, for parts, as is, as pictured, no returns, no refunds. If you have any questions, please feel free to ask.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package Included：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Description： Wedge type tool post are precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package List:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of： 251-222 Wedge Type Tool Post Swing Dia 10-15" 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
Buy It Now
$9.75 Shipping Condition: New Location: South El Monte, United States Bonded together with friction and skim coats. The fabrics most commonly used are nylon, cotton duck. SOUTH BEND, LOGAN, ATLAS FLAT DRIVE BELT, CUSTOM ... moreCUT, LATHES, MILLS, OR ANY OTHER MACHINES, CAN BE USED FOR OTHER APPLICATIONS.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It’s very possible that even though your model number is not listed in the title it may still work. There is a couple of options.
Buy It Now
$7.15 Shipping Condition: Used Location: Temecula, United States Good condition. Comes as shown.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States
Buy It Now
$7.84 Shipping Condition: Used Location: Temecula, United States Logan clutch worm wheel in good condition with 3 small chips, as shown in the last 3 pictures. Please make sure this will fit your machine.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States ( depends on your device ).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of?? 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
Buy It Now
$6.85 Shipping Condition: New Location: Kenilworth, United States This is a heavy duty large drill press size 1/2 chuck. Not a small size hand drill 1/2 chuck.
Buy It Now
$6.90 Shipping Condition: Used Location: New Hyde Park, United States Logan Lathe 10” 11” Apron to Rack Gear / Pinion LA - 548 - 1. Condition is Used. Shipped with USPS Ground Advantage.
$8.74 Shipping Condition: Used Location: Hayden, United States 56 tooth change gear from a Logan model 200 lathe. 5/8 bore
Buy It Now
$14.99 Shipping Condition: For parts or not working Location: Temecula, United States La-110 Saddle,screw and hand wheel. The screw is very worn.
Buy It Now
$4.35 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. ( depends on your device ).
Buy It Now
Free Shipping Condition: New – Open box Location: La Habra, United States LEATHER DRIVE BELT CLIPS & PIN SOUTH BEND LATHE LOGAN MACHINIST ETC FREE SHIPPI. Free shipping to the lower 48 United States First class mail
Buy It Now
$10.00 Shipping Condition: Used Location: New Hyde Park, United States Logan 200 10" Lathe Apron Carriage Cross Slide Swivel Base Mount. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States There is a couple of options. (Preferred & cheapest).
Buy It Now
$5.00 Shipping Condition: Used Location: New Hyde Park, United States Logan Lathe 10” 815 820 Compound Bushing for Leadscrew. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$5.99 Shipping Condition: Used Location: Temecula, United States Bushing has some nicks and marks . Threads are in good condition. Includes 2 Cap head screws. Part no. 2089
Buy It Now
$25.85 Shipping Condition: Used Location: Troy, United States It has a heavy cast iron bed with pyramidal rails 4 1/4" apart center to center. The bed is 6" from front to back and has a 2 3/8" gap between bed rails. ... moreWear and Tear dust and dirt rust and pitting paint loss but in good working condition.
Buy It Now
$10.40 Shipping Condition: New Location: Berrien Springs, United States New OEM M6-12A Half Nuts / Split Nuts for the 6" Atlas 618 & Craftsman 101 Lathes. M6-12A half nuts used in the later model lathes, they are wider than ... morethe early M6-12 nuts. The threaded portion is 3/4" wide.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Spring Hill, United States Rebuilt service for south bend 10L. I can also rebuild 9" south bend and 10&11" logan lathe half nuts.
Buy It Now
$32.55 Shipping Condition: Used Location: New Hyde Park, United States
Buy It Now
$9.75 Shipping Condition: Used Location: New Britain, United States As shown in pictures
Buy It Now
$24.50 Shipping Condition: New Location: Berrien Springs, United States
Buy It Now
$9.95 Shipping Condition: Used Location: Troy, United States About 1 1/2" Thick takes 1/2" Wide belts. Local Pick-up Available.
Buy It Now
$10.55 Shipping Condition: Used Location: Berlin, United States AS SHOWN
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" .
Buy It Now
$8.85 Shipping Condition: New Location: Kenilworth, United States
|
|
|
|
Logan Lathe 20 Tooth Gear Box Gear for 12" & 14" (LP-1025, 2227, 18A-32227)
20-Tooth Logan lathe gear box gear for 12" and 14" lathes. From S/N 67012. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
MACHINIST TOOL LATHE MILL Lantern Tool Post for South Bend Atlas Logan Lathe
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL On May-08-13 at 17:06:41 PDT. Seller added the following information: THE BASE IS INCLUDED IN THE AUCTION. PLEASE DISREGARD THAT THE BASE IS NOT INCLUDED*
|
|
|
MT2 3 Jaw Lathe Chuck Logan South Bend
Here is a MT2 3 jaw chuck. The chuck does not rotate on the MT2 arbor. It opens to about 1 inch diameter. Turning the knurled ring adjusts the jaws. Please e-mail with any questions.
|
|
|
LOGAN LATHE INDUSTRIAL ANTIQUE MACHINE CAST IRON LEGS - TABLE ART KITCHEN
This is a nice pair of cast iron machine support legs from a LOGAN lathe. They are in good shape with no damage or repairs. These make great furniture legs. Kitchen or dining room table legs, industrial art etc. They are heavy duty and could actually support a lot of weight(with the correct bracing) All the relevent sizes are illustrated in the pictures. Each leg weighs approx. 35lbs(75 lbs packed) These legs are getting harder& harder to find. Get them while you can! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT ... moreTHE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City.
|
|
|
VINTAGE HSS HIGH SPEED STEEL LATHE BITS-60 TOTAL SOUTH BEND LOGAN ATLAS
VINTAGE HSS HIGH SPEED STEEL LATHE BITS-60 TOTAL SOUTH BEND LOGAN ATLAS Vintage HSS Lathe bits. 60 total-most are 3/8" or 5/16" with others mixed in some of the brands are Rex AAA. Besly, Armstrong, Clarite, momax etc. Thanks and good luck. DG_gsrx_vers_486(GS 6.5.1(486)
|
|
|
Logan Lathe Milling Attachment
This is a Logan Lathe Milling Attachment. It came off a logan 820 lathe which is a 10X24 lathe. It is in well used condition as seen in the pictures but all moving parts turn cleanly and the attachment works as designed. These are VERY hard to find. I have priced it comparable with others that have sold in the past.
|
|
|
sheldon lathe exl 10 inch end gear south bend logan
Used 80 teeth endgear from a 10 inch sheldon lathe. Very good condition.
|
|
|
11" Powermatic-Logan Model 1920 Lathe
Lathe in very good operating condition. New drum switch, several hundreds of dollars worth of cutting tools, bits, collets and chucks are included(what you see in the pictures is what you'll get) Operators instructions(ie; owners manual) also included. Buyer will be responsible for pick up- palletizing/packaging/freight handling and shipping costs. PayPal only please.
|
|
|
LOGAN LATHE Model 200 Drive Box CONE PULLEY and SHAFT
Used LOGAN 200 lathe CONE PULLEY(LA-316) and SHAFT(LA-317) from the drive box assembly. Also included are the 2 cone socket set screws. 1 collar w/set screw and 1 bushing.
|
|
|
MT3 Dead Centers Lathe Logan South Bend
Here are 2 MT3 dead centers. Please e-mail with any questions.
|
|
|
LATER LOGAN 10&11" LATHE 32/16 COMPOUND GEAR LA-1220-A AFTER SERIAL #46561
32/16 tooth compound gear for later quick change gear boxes. After serial number 46561. You will receive either a new gear with a new bushing or, a good used gear with a new bushing. 1.7/0.9 o.d. 765 wide with a.438 bushed bore. This is the one that goes when you screw up.
|
|
|
VERY NICE ORIGINAL LOGAN 10" MODEL 200 LATHE SADDLE CAST & GIBS PART LA-690
Very Nice- Original saddle cast assembly for a Model 200 Logan 10" lathe. Retains original bearing. Saddle gib, front gib and mounting hardware. Stamped with Logan part number LA 690. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BULL GEAR PLUNGER & SPRING FOR LOGAN 10" MODEL 200 METAL LATHE LA-345 & LA-346
Excellent- Original bull gear plunger and spring for the bull gear of a Logan 10" Model 200 lathe. Excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL LOGAN 9" MODEL 400 LATHE SADDLE GIB ASSEMBLY LB-71 LB-62
Nice- Original saddle gib assembly for a Model 400 Logan 9" lathe. Gibs are stamped with Logan part numbers LB-71 and LB-62. Hardware is included as pictured. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL LOGAN 10" MODEL 200 LATHE 42" BED QUICK CHANGE LEAD SCREW
Excellent Condition- Original quick change lead screw for a 3 1/2 foot bed Logan 10" Model 200 lathe. The keyed lead screw is 46 3/4" end to end. Threaded length is 29 1/2" Diameter is 3/4" Threads are in excellent condition. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL LOGAN 9" MODEL 400 METAL LATHE COMPOUND REST BASE GIB & SCREWS
Nice- Original Logan 9" Model 400 compound rest base gib and set screws. Gib is 5 1/4" long. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
COMPOUND REST TOP SHOES & SCREWS FOR LOGAN 9" MODEL 400 METAL LATHE
Nice- Compound rest top shoes and set screws for a Logan 9" Model 400 lathe. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL LOGAN 9" 10" LATHE LANTERN ROCKER TOOL POST & WRENCH
Nice- Original rocker type tool post and tool post wrench assembly for a Logan 9" or 10" lathe. Tool post base is 1 3/8" x 1 3/8" 5/16" thick. Tool post body diameter is 1" Stands 3 1/4" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/8" with the washer and rocker in place. Bolt is removable from body. 3/8" tool post wrench is also included. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Logan Screw Cutting Lathe Model 1955 11' Works Great Low Reserve !!!
Up for bid a 11' Logan screw Cutting Lathe it was used in my Friends machine shop up until last year. It is working Its been in storage for the last few months. Its on a plastic palette can be loaded on to your truck with a forklift Monday-Friday 9A M-4PM If you have any questions call David at 201-936-0423
|
|
|
Jacobs 58B headstock chuck for Atlas, Craftsman, South Bend, Logan lathe
PLEASE READ! This is a Jacobs 58B headstock chuck. However. It has been altered to fit on a smaller lathe spindle. Someone has welded in an insert with 1" x 8 tpi threads and then ground the end. This will not fit on lathes with a 1 1/2" spindle. I tried it out on a lathe I have with a 1"8 spindle and the chuck definitely wobbles with runout. I don't know if this can be fixed, so I am selling this chuck as is, for parts only. Maybe you can get it to run true. If not, maybe you can use it for parts. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ec369b43d-0xfd-
|
|
|
Armstong Williams Lathe Dogs South Bend Logan Clausing Monarch American
Armstrong 2" JH Williams 1-3/4" Armstrong 1-1/2" JH Williams 1" No Name but made in the USA 3/4" Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
metal lathe tool holder,metal lathe tool block,south bend,atlas,logan
4 sided indexable tool block.Very well made.No name just a serial number.measurements are 3-3/8" square will take a tool 1-3/16" high.This came from a south bend 9" lathe.The tee nut measures 1-1/4" wide at the widest point and 13/16 at its narrowest,tee slot would be 1/4" high.no international
|
|
|
metal lathe centers and tools,south bend,atlas,logan
The mag dial set up is china made.The dial is missing the tip and cover that goes over the spring but works fine.2) 2MT center drill holders,1) 2MT spur center,1) 2MT crotch center,1) 2MT drill chuck says made in germany,1)NO 3A 2MT jacobs drill chuck,1) straight shank wheel arbor,4) straight shank die holders,1) shop made looking 2MT center,2) 2MT dead centers,2) chuck centers(1 point and 1 cup)1) fish tail gage,4)taper sleeves,1) bull center,The bull center i believe is shop made and would need work to be used
|
|
|
ORIGINAL MT2 ENCO LIVE CENTER 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Original Enco live center with MT2 shank. Shank is 2 3/4" long. Face is stamped"ENCO MFG CO MADE IN FRANCE 2MT CHICAGO. ILL 60639" Center point and body turn live on shank. In good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Logan Lathe Countershaft Pulley Flat Belt
3 steps. 5" 4" 3" with a 7/8 bore, Good condition. Comes as shown. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13ec8e945b7-0xf8-
|
|
|
precision 3c metal lathe lever collet closer,south bend,atlas,logan
Precision 3c lever collet closer.Came with a south bend 9" lathe but dont believe it was ever set up to work on that lathe.exposed tube measures 10-3/8" and overall its 16" long.bearings are loose(shown in pics)pin is in the link.no international
|
|
|
Logan Montgomery Wards 10" Lathe Threading Dial
Logan 10" lathe thread dial in good working condition. Has good gear and easy to read dial. Comes as shown.
|
|
|
Logan Montgomery Wards 10" Lathe Cross Slide Thread Stop
Logan 10" lathe cross slide threading stop in good working condition. Comes as shown.
|
|
|
Logan Lathe Carriage Apron Clutch Assembly
This is a used clutch assembly for a Logan lathe. I am sorry but I do not know what model it fits. It came in a box of parts with my Logan 820(10" but does not fit and I believe it is for a larger lathe. Paypal Only. I will only ship to your confirmed shipping address in the USA.
|
|
|
LOGAN LATHE FEED GEARS, BANJO, REVERSER, MISC AS SHOWN
LOGAN LATHE FEED GEARS. BANJO, REVERSER, MISC AS SHOWN, MISC FEED GEARS. BANJO, ETC AS SHOWN. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE LOGAN LATHE PARTS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
LOGAN LATHE LEAD SCREW 46-1/2" OAL
LOGAN LATHE LEAD SCREW 46-1/2" OAL, LOGAN LEAD SCREW 46-1/2" OAL STILL USABLE. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE LOGAN LATHE PARTS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
LOGAN LATHE COMPOUND AND CARRIAGE
LOGAN LATHE COMPOUND AND CARRIAGE, LOGAN CARRIAGE AND COMPOUND. 1/2 NUT IS BROKEN AS WELL AS LEAD SCREW DRIVE GEAR BRACKET. AS IS NO RETURNS* PLEASE CHECK OUR OTHER AUCTIONS FOR MORE LOGAN LATHE PARTS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Lathe back plate 1 1/2-8 threads- South Bend/Atlas /Craftsman/Logan
For your consideration is this lathe back plate. 1 1/2"8 threads. 5 1/4" diameter. Flange thickness is 1/2" Total thickness is 1" Will fit in a small flat rate box. THANKS FOR LOOKING! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ed210a0aa-0x103-
|
|
|
LOGAN LATHE HEAD STOCK, SPINDLE, BACK GEAR ETC.
LOGAN LATHE HEAD STOCK. SPINDLE, BACK GEAR ETC. LOGAN LATHE HEAD STOCK AS SHOWN. SPINDLE SPINS FREELY, BROCKEN TOOTH ON FEED GEAR AS SHOWN. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE LOGAN LATHE PARTS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
LOGAN 10" LATHE - MOTOR MOUNT SUPPORT BRACKET ASSEMBLY (#LA-1039)
The following parts came from a 10" Logan Lathe. When I got this lathe it was in the process of being completely restored and the previous owner had bought lots of new parts and put in lots of work. The model# 1875 The Serial# 72675 This is the motor mount plate assembly. It's in excellent condition. In fact that's the factory paint I believe and this part looks almost brand new! Don't miss it! Super fast FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This ... morecan mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only
|
|
|
(5) ASSORTED VINTAGE LATHE BORING BARS WITH 1" SHANKS - LOGAN SOUTH BEND ATLAS
This is a lot of(5) assorted used lathe boring bars. All with 1" shanks. The dimensions are shown in the pictures. Most of these are used bars, they are not perfect and might be missing some clamp screws or have been milled down in parts etc. This is a nice varied lot that I'm offering at a fair price for a quick sale. Don't miss'em. Especially as they include Super fast FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in ... more2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
CROZIER 3"x3" LATHE 4-WAY INDEXABLE TOOLPOST - SOUTH BEND LOGAN CLAUSING ATLAS
This is a vintage CROZIER 3"x3" 4-way indexable lathe toolpost holder. It's beautifully made and fully indexable via the positioning system which allows it to positively lock into multiple positions with a turn of the handle. Perfect accessory for an American lathe like South Bend. Clausing, Atlas-Craftsman or Logan etc. In fact it was installed on a 10" Atlas when I got it. It's in great condition with all the correct hardware and no damage except for some scuffing on the nameplate(but it's also stamped in) It holds up to a 5/8" lathe bit. The clamp size is noted in the pictures. This is a very nice(and collectable) vintage piece of american tooling. Don't miss it! Immediate FREE PRIORITY SHIPPING and great packing included! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is ... morepicked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you wer
|
|
|
ARMSTRONG LH RH BB TOOL HOLDER for 6" Atlas Craftsman South Bend Logan lathe
This listing is for a Armstrong LH RH BB tool holder 2030. It is in excellent condition. Comes with new boring bar. It measures 5/8" X 3/8" I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Set of 9 LOGAN LATHE CHANGE GEARS 5/8 keyed arbor
Here is a set of 9 change gears for a LOGAN or WARDS LATHE in clean original condition. Tooth numbers- 32-40-46-48-52-54-56-60-70. Gears have a 5/8" center hole with a keyway. In excellent condition. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13ed31f7241-0xed-
|
|
|
SET OF ARMSTRONG TOOL HOLDERS for 6" Atlas Craftsman South Bend Logan lathe
This listing is for a set of Armstrong tool holders 2010-L 2010-S 2010-R. They are in great shape and measure 3/4" X 3/8" They hold 1/4" bits. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Logan Lathe 26 Tooth Quick Change Gear Box Gear 10" 11" LP-1154 LA-495
26-Tooth Logan lathe quick change gear box gear for 10" 11" lathes. To S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear to be new. However. The may be stained and/or have a few dings and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ed373a29f-0x100-
|
|
|
Logan Lathe 23 Tooth Quick Change Gear Box Gear 10" 11" LP-1152 LA-494
23-Tooth Logan lathe quick change gear box gear for 10" 11" lathes. To S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear to be new. However. The may be stained and/or have a few dings and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 16 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1005 LA-1225
16-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear to be new. However. The may be stained and/or have a few dings and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 18 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1006 LA-1226
18-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears used but are in good functional condition. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Hardinge 3C Collets Lathe Collet, Atlas, Logan, South Bend
1/8. 3/16, 5/16, 3/8, 7/16, 1/2 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
ATLAS ST TOOL HOLDER for Atlas Craftsman South Bend Logan lathe
This listing is for a Atlas ST tool holder. It is in excellent condition. It measures 7/8" X 3/8" and holds a 1/4" bit. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
ARMSTRONG CUT-OFF TOOL 202-R for 6" Atlas Craftsman South Bend Logan lathe
This listing is for a Armstrong cut-off tool 2020-R. It is in excellent condition. Comes with cut-off blade. It measures 3/4" X 3/8" I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
LOGAN 10 11 METAL LATHE 44 TOOTH CHANGE GEAR 135
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~~ 44 teeth all teeth are good 2 7/8" diameter hole is 5/8" diameter Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your ... morelathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ed590fe64-0x105-
|
|
|
FURNACE 2HP FORWARD/REVERSE SWITCH AND MOUNT FOR 11" LOGAN LATHE
THIS IS A FURNACE FORWARD/REVERSE DRUM SWITCH RATED FOR 2 HP SINGLE AND THREE PHASE. IT IS STYLE KS12 AND IT IS IN VERY GOOD CONDITION WITH NICE SPRING ACTION AND GOOD CONTACTS. THIS ALSO COMES WITH THE MOUNT FOR AN 11" LOGAN LATHE. THE SWITCH IS 5 13/16" TALL. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ed63e8a5d-0x107-
|
|
|
Logan Brand 6" 4-Jaw Lathe Chuck
This auction is Logan Brand 6" 4-Jaw Metal Lathe Chuck in good condition. Ships via US Postal Service. No returns.
|
|
|
Armstrong Williams Cut Off Parting Tool Holders, South Bend Logan Clausing Lathe
Williams No. 31 Left Armstrong No. 21 Straight Armstrong No. 31 Right New 1/8" x 3/4" Cut Off Blade. No name on it. Shank 1/2" x 1-3/16" Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
|
|
|
LOGAN 10" LATHE LEADSCREW SHAFT COLLAR LA-169
LOGAN PART# LA-169 SHAFT COLLAR WITH#0314 SOCKET SET SCREW. MOUNTS ON LEADSCREW AGAINST SUPPORT BEARING HOUSING.
|
|
|
5C COLLET CLOSER 11 12 & 14" LATHE SOUTH BEND LOGAN LE BLOND SHELDON OTHERS
Complete lever type collet closer for 5C collets. This came off a 14" Logan but. Should be adaptable to just about any lathe with a 1 3/8" spindle bore. I have both the 1 3/4" x 20 TPI spindle adapter for most 11 and 12" machines and a 2 1/32" that's what the 14" lathe spindle tail end mics at) x 20 TPI adapter. The 27" long tube is for a 14" Logan but, making a new tube is an easy lathe project. The tube could also be sectioned and welded. The center of the tube has been turned down, not leaving enough meat to just cut and re-thread the collet end. Please feel free to ask any questions you may have.
|
|
|
Logan Model 200 Metalworking Lathe
Logan Model 200 Metalworking Lathe. Excellent mechanical condition. Works great. No rust on critical surfaces such as lathe bed. Minor surface rust in some of the non-critical areas. If anyone is interested in receiving a copy of the owner's manual let me know and I can email a copy of it to you before you bid. Specs: Number of Spindle Speeds: 12, Spindle Speed Range: 30 RPM to 1450 RPM, Threading Range: 4TPI- 64TPI(34 different threads possible in this range) Number of Non-Threading Feed Rates: 13(from 0.0046" to 0.0156" Swing over Bed: approx 5" Swing over Carriage: approx 3" Distance Between Centers: approx 28" Hole Through Spindle: 13/16, Motor Horsepower: 1/2HP, Approximate year of manufacture is 1942, Included Parts: 3-Jaw Self Centering Scroll Chuck, 4-Jaw Independently Adjustable Chuck, Faceplate, Full ... moreSet of Change Gears, Tailstock with Live Center. Dead Center, Drill Chuck Steady Rest, Stand, Chip Tray, Extra Accessories/Goodies: Dumore Mini-Toolpost Grinder(works great. See image) Milling Attachment(Needs work. Bad bearings) A huge selection of literally hundreds of HSS tool bits. Notes on Pickup and Shipping. Pick up or buyer arranged shipping only! Weighs several hundred pounds. But could easily be transported in a pickup truck. Have an engine hoist that can be used to load the lathe into buyer's vehicle. Item is located in the Imperial Missouri area(about 25 minutes south of Saint Louis) 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13edc9bfd36-0xfe-
|
|
|
JACOBS CHUCK 14N 0-1/2" for 6" Atlas Craftsman South Bend Logan lathe #2MT NICE
This listing is for a Jacobs 14N Super Chuck. It is 0-1/2" and has a#2MT. It is in very good condition. It scrolls smoothly. Comes with key. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
6" FACEPLATE+ 4 DOGS for Atlas Craftsman South Bend Logan lathe
This listing is for a 6" Atlas faceplate and 4 lathe dogs. Three are Atlas 201-1/2" 301-3/4" and 401-1" One is a South Bend 283-1 1/8" The faceplate is 1 1/2"8tpi. Everything is in great condition. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Southbend Logan lathe 6" D. 4-jaw chuck 1-1/2" - 8 thread
Used in very good condition Southbend Logan 6 inch diameter 4-jaw chuck. Fits lathes with 1-1/2" 8 threaded spindles. Marked Kalamazoo Ind. A 6608. Made in USA. Buyer to payshipping on 12 pounds. Due to excessive and abusive negative feedback from Canadians, I no longer sell to Canada. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 10" MODEL 200 LATHE SPLIT NUT LEVER AND CAM
Nice original Logan 10" lathe Split Nut Lever and Cam. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13ee170f23f-0xed-
|
|
|
VINTAGE SET LOGAN 10 CAST IRON LATHE LEGS STAND BENCH TABLE INDUSTRIAL MACHINE
Very nice- original Logan cast iron lathe legs. These legs were mounted to a Model 820. Cast iron legs stand 29 1/4" high. The mounting base top is 9 1/2" x 5 1/4" With top bolt mounting distances at 7 3/4" center to center, 1/2" hole. Unit is 19" wide at the leg base. Nice solid, original cast iron set. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13ee170f296-0x101-
|
|
|
J.H. Williams Parting Tool for Lathe,Logan,South Bend Atlas,Enco,Craftsman,Jet
Excellent J.H. Williams RH Parting Tool Holder#2020R with 9/16" Armstrong Parting Tool for Lathe 3/8" x 13/16" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Straight Tool Holder for Lathe,Logan,South Bend Atlas,Enco,Craftsman
Excellent Armstrong Straight Tool Holder#2010S for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong LH Tool Holder for Lathe,Logan,South Bend Atlas,Enco,Jet,Craftsman
Excellent Armstrong LH Tool Holder#2010L for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong RH Tool Holder for Lathe,Logan,South Bend Atlas,Enco,Jet,Craftsman
Excellent Armstrong RH Tool Holder#2010R for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Straight Parting Tool for Lathe,Logan,South Bend Atlas,Enco,Jet
Excellent Armstrong Straight Parting Tool and Holder#2020S for Lathe Includes 9/16" parting tool. 3/8" x 13/16" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Threading Tool for Lathe,Logan,South Bend Atlas,Enco,Jet, Craftsman
Excellent Armstrong Threading Tool and Holder#2050 for Lathe Threading tool looks to have never been sharpened. 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Knurling Tool for Lathe,Logan,South Bend Atlas,Enco,Jet, Craftsman
Excellent Armstrong Knurling Tool#2040 for Lathe Very good diagonal knurls. 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Logan Rocker Tool Post Assy for Lathe,Logan,South Bend Atlas,Enco,Jet, Craftsman
Very Good Logan Rocker Tool Post Assembly for Lathe 3 1/4" Tall lantern with 7/16" x 2" holder slot. Base block is 1 3/8" x 1 3/8" x 1/4" includes Williams#583 wrench. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Craftsman Live Center for Lathe,Logan,South Bend Atlas,Enco,Jet, Craftsman
Very Good Single Bearing Craftsman Live Center for Lathe 2 MT arbor. Smooth bearing, good point with minor scratches, arbor has some light pitting. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Double Bearing Live Center for Lathe,Logan,South Bend Atlas,Enco,Jet
Very Good Double Bearing Live Center for Lathe 2 MT arbor. Smooth bearings, very good point with light scratches, point tapers up to 1" plus, USA bearings, no manufacturers markings. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Large J.H. Williams Drive Dog for Lathe,Logan,South Bend Atlas,Enco,Jet
Large 1 1/2" Heavy Duty J.H. Williams#6 Lathe Dog for Lathe Tail has some grinding to re-size to approx. 5/8" Overall length is + or- 8" These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
6" Logan Drive/Face Plate for Lathe,South Bend,Logan,Atlas,Enco,Jet,Craftsman
Excellent 6" Logan#LA-170 Drive/Face Plate for Lathe 1 1/2" x 8TPI threads. 9/16" face plate slots, 3/4" drive slot. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
6" 4 Jaw Independant Chuck for Lathe,South Bend,Logan,Atlas,Enco,Jet,Craftsman
Excellent 6" 4 Jaw Independent Chuck USA Made in Toledo OH 1 1/2" x 8TPI thread back plate. Reversible jaws, excellent key included. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Dumore tool post grinder,south bend lathe,logan,atlas
Dumore#44 tool post grinder.Cord is not original but works fine.Comes with 1 extra pulley and 1 belt.I tried it and it runs fine
|
|
|
LOGAN LATHE 10" MODEL SIDE GEAR COVER AND MOUNT
THIS IS THE SIDE GEAR COVER AND MOUNT FROM A 10" LOGAN LATHE MODEL 820. THIS SHOULD FIT ALL 10" LATHES WITH QUICK CHANGE GEAR BOX AND MAYBE SOME WITHOUT. EXCELLENT CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
|
|
|
SET OF 3 ARMSTRONG TOOL HOLDERS #1 S, L, & R for South Bend Logan lathe ect
SET OF 3 ARMSTRONG TOOL HOLDERS#1 S. L, R, 6" long, 1/2" wide for 5/16" bits 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ee82bb505-0xfe-
|
|
|
Logan lathe 11" lathe halfnuts power apron
halfnuts from a 11" logan lathe. Condition is good. They are showing some wear but still are very usable. Selling as is. Shipping is FREE to lower 48 states. Thanks Mike
|
|
|
11" logan lathe legs
11" logan lathe legs. Condition is good. Selling as is. Shipping is FREE to lower 48 states. Thanks Mike
|
|
|
UNION 5" 3 JAW SCROLL CHUCK 1 1/2X8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
Pretty good Union 5" chuck with a 1 3/8" through hole. It is a little scarred up but. The jaws are sharp and tight. It has been disassembled, cleaned, lubed and reassembled. Sorry, no 1/4" key or reverse jaws.
|
|
|
VINTAGE LOGAN METAL LATHE T-72 CHANGE GEARE MACHINIST TOOL
DESCRIPTION: USED. LOGAN T-72 GEAR. NO MISSING OR CHIPPED TEETH. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TO
|
|
|
VERY NICE LOGAN 9 MODEL 400 LATHE HALF NUT CAM SHAFT LEVER & HANDLE
Very Nice- Original half nut/ split nut cam shaft lever with handle and taper pin from a 9" Logan Model 400 lathe. Interior diameter is 3/8" All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13ee99b6d11-0xf8-
|
|
|
3/8 bit lathe tool holder left right & center logan south bend atlas 3 way tool
3/8 bit lathe tool holder left right& center logan south bend atlas 3 way tool lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13eeb24eef8-0xf2-
|
|
|
LOGAN VARIABLE SPEED LATHE INDICATOR/POINTER
Speed indicator/pointer for Logan variable speed lathes.
|
|
|
4" DIAMETER 4 JAW LATHE CHUCK W/ KEY ATLAS CRAFTSMAN LOGAN SOUTH BEND DELTA
4" DIAMETER 4 JAW LATHE CHUCK W/ KEY THIS CAME OFF A SMALL ATLAS CRAFTSMAN LATHE. OPERATES SMOOTHLY. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
|
|
|
LATHE JACOBS KEYLESS DRILL CHUCK SOUTH BEND ATLAS CRAFTSMAN CLAUSING LOGAN
JACOBS KEYLESS DRILL CHUCK WITH MT 2 MOUNT 3/64" 1/2 CAPACITY OPERATES SMOOTHLY JT 33 TAPER THIS CHUCK HAS LARGE KNURLED GRIPS ALLOWING PLENTY OF TIGHTE NING TO RQUE FOR NO SLIP OPERATION! IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. ... morePLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
|
|
|
LOGAN (430) 6" 3-JAW LATHE SCROLL CHUCK WITH 2-PIECE JAWS & 5C COLLET MOUNT
This is a used genuine LOGAN'430' 6" 3-Jaw lathe scroll chuck with two-piece jaws(no upper jaws are included) It has a 5C Collet backplate. Great for a lathe or indexer etc. This chuck is in great shape. It has a few little dings and scrapes(see pictures for details) but nothing terrible and it has a nice firm smooth scrolling movement. Years service left in this one, don't miss it as the price includes s uper fast FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME ... moreDAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is
|
|
|
South Bend Fourteen 14 x 36 Engine Lathe QC Tool Post 8"Chuck Logan Craftsman
I apologize for the quality of the pictures.There is another lathe sitting in front of this machine This is a nice South Bend"Fourteen" Lathe. It is a 14 x 36 lathe with 8" 3-Jaw Chuck and Armstrong Quick Change Tool Post. We have powered it up and it sounds good and everything seems to work as it should. Handles turn smoothly and not an excessive amount of backlash. It is wired for 230 volt/ 3 phase electric. There is some wear on the ways but nothing excessive. Loading at our facility is free of charge. Buyer pays all shipping. Ohio Sales Tax Rules Apply. Payment must be received within 5 days of close of sale. Sold AS IS.
|
|
|
10" LOGAN SOUTHBEND lathe STEADY REST
This listing is for a 10" Logan or South Bend lathe steady rest. It has one arm that has been brazed. But it was a very nice job. The measurement from center of"V" to center of flat is 3 1/2" From center of rest to bottom of flat is 5 1/4" I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
NICE LOT OF 33PC. 3/8" TOOL STEEL for Atlas Craftsman South Bend Logan lathe
This listing is for a lot of 33 pc. of 3/8" tool steel. Some are carbide tipped. Names include Mo Max Besley Carboloy. Others. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13ef2e54a0b-0xfe-
|
|
|
Lathe spindle nose protector south bend logan sheldon
used 2-1/4 x 8 tpi lathe spindle nose protector.
|
|
|
Armstrong Storage Box for Lathe Tools,Logan,South Bend,Atlas,Jet,Enco,Craftsman
Very Good Armstrong Storage Box for Lathe Tool Holders Storage for eight tool holders plus compartment for tools. 9 3/4" x 7 3/8" x 1 7/8" Original paint, in good condition in interior and fair condition on exterior. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Armstrong Boring Bar Holder for Lathe,Logan,South Bend,Atlas,Jet,Enco,Craftsman
Excellent Armstrong Boring Bar Holder#2080 for Lathe 3/8" x 3/4" Shank. Includes one 1/4" boring bar and one 3/8" boring bar. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Threading Dial Assembly for 9" Logan Lathe
Excellent Threading Dial from 9" 9B Series Logan Lathe. May fit Others Excellent 16T gear. 7/8" dial face, 2 1/2" from center of gear to center of mounting hole, includes mounting screw. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Compound Rest Assembly for 9" Logan Lathe
Excellent Compound Rest Assembly#LB-135 for 9" 9B Series Logan Lathe Excellent T-slot. 1 corner ding from chuck contact, large dial with clean, clear scale, clean, clear base scale, very good slides, minor screw and nut thread wear. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Tail Stock Assembly for 9" Logan Lathe
Excellent Tail Stock Assembly#LB-190 for 9" 9B Series Logan Lathe Very little backlash. Clean, clear scale on spindle, 2 MT taper bore, smooth running, includes LB79 Wrench and Dead Center, Original Clamp and Bolt. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
|
Center Rest for 9" Logan Lathe
Excellent Center Rest#AC-282 for 9" 9B Series Logan Lathe Minor face wear on jaws. Some side wear(see picture) 3" capacity, not original base clamp. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
|
|
 |