|
Freud UP153 3-Wing 3-Inch Straight Edge Shaper Cutter, 1-1/4 Bore
I found this freud carbide shaper cutter while cleaning out my shop. It doesn't look like it's ever been used. It is 3.5" dia. x 3" cut with 1 1/4 dia bore. The cheapest I've seen these listed for is 153.00 with regular price of 249.00.
|
|
|
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Mini-Pro Line Carbide Tipped Shaper Cutter 3/4" Bore 2-15/16" Diameter 1/4" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers ... moreto opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"electronic proof of signature delivery" acceptable to
|
|
|
Freeborn Cope & Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove
Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Originally an 8pc MC-51-010 set. Now missing the 1/4" center cutters. 3/4" Bore Carbide Tipped Double-Sided Cope& Pattern Cutter Set Built to cut 1-3/4" passage doors. Cuts 1/2" x 5/8" deep tongue and groove. Use 1-11/16" rub bearings(not included) to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent ... moreservices performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be pr
|
|
|
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Two(2) Mini-Pro Line Carbide Tipped Shaper Cutters 3/4" Bore 1-11/16" Diameter 1/4" and 1/2" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible ... morefor delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"
|
|
|
Shopsmith Bead & 1/4 Round Shaper Cutter #505607, Free Shipping!!
Shopsmith Bead& 1/4 Round Shaper Cutter#505607. Free Shipping! It is in very good unused shape and you get free shipping! I have several cutters and an arbor on other auctions available. This would run you over $19 from the factory. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
(27) Vintage 3 wing 1/2" SHAPER CUTTER KNIFE BITS & SPACERS Craftsman Delta
27) Vintage 3 wing 1/2" Arbor ROUTER SHAPER CUTTER KNIFE BITS& SPACERS Craftsman Simpson Delta. No Reserve. FREE shipping in U.S.A.
|
|
|
Shopsmith 1" Jointer Shaper Cutter #505611, Free Shipping!!
Shopsmith 1" Jointer Shaper Cutter#505611. Free Shipping! It is in very good used shape and you get free shipping! I have several cutters and an arbor on other auctions available. This would run you over $19 from the factory. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
1-1/8" Shaper Cutter Holder
This auction is for a steel shaper cutter holder. It does not have any markings except for stamped lines to align the two halves. All the dimensions should be visible in the photos. But if anymore info is needed please ask. The height of the cutters to be used can vary by using longer bolts, as long as it is safe.
|
|
|
Grizzly Carbide tipped SHAPER CUTTER Model G1100 1/4" & 1/2"
$3.00 shipping cost in USA only. You are bidding on a Grizzly Carbide tipped SHAPER CUTTER Model G1100 1/4" 1/2" round. Used but looks just re sharpened. No damage that I can see. Can be picked up. Do not bid if you do not know what you are buying. Picture tells the story. Any questions please email WELL in advance. Will combine ship if they fit in same flat rate box. $3.00 shipping cost in USA only. Email for payment options.
|
|
|
Shopsmith 1/4" & 1/2" Combo Qtr. Round Shaper Cutter, #505608 Free Shipping!!
Shopsmith 1/4" 1/2" Combo Qtr. Round Shaper Cutter. 505608 Free Shipping! It is in very good unused shape and you get free shipping! I have several cutters and an arbor on other auctions available. This would run you over $19 from the factory. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
FREUD CARBIDE SHAPER CUTTER UP129 5-1/8" X 1-1/4"
Freud carbide shaper cutter in great shape. UP129 5-1/8" x 1-1/4" 10.000 RPM has 4mm carbide left with no chips. Free shipping. Please check out my other auctions. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-146b18ac2d9-0x10b-
|
|
|
Freeborn T-Alloy Glue Joint Shaper Cutter for 1-1/4" Spindle
For sale is a used. Just professionally sharpened Freeborn Glue Joint Shaper Cutter. The cutting surface is a T-Alloy, which is similar to carbide. This is for a shaper with a 1-1/4" spindle. Can be used for wood up to 1-7/8" thick. They sell for about $300 when new.
|
|
|
Lot 101 SHAPER CUTTER CARBIDE 3 WING 1 1/8" Bore Moulder Cnc Router
Steel cutter head. See photo for details. Could be bored and or bushed to use with other spindle sizes. Will combine shipping. All measurements are approximate except for bore size. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-146b992ebaf-0x10e-
|
|
|
1 1/4" Four Knife 100mm Corrugated Cutter Block shaper molder 130mm cutting edge
diameter- 100mm cutting edge length- height 5 1/8" Excellent condition
|
|
|
Freeborn T-Alloy Reversible Glue Joint Shaper Cutter for 1-1/4" Spindle
For sale is a used. Professionally sharpened Freeborn Glue Joint Shaper Cutter. The cutting surface is a T-Alloy, which is similar to carbide. It was returned to the manufacturer for sharpening in June, 2014, and hasn't been used since. This is for a shaper with a 1-1/4" spindle. Can be used for wood up to 1-7/8" thick. They sell for about $300 when new.
|
|
|
LRH KING J-1365-1 CARBIDE TIPPED SHAPER PANEL CUTTER Ogee DETAIL 1" BORE USA
Quality LHR King Shaper Cutter Ogee J-1365-1 Panel Cutter Large Three Wing Cutter Carbide Tipped Diameter(D) 7-3/4" 1" Bore ~ Fits 1" to 3/4" Spindles Spun Balanced and Verified Anti Kickback Design Geometrically Perfect Useful in Other Woodworking Applications Made in the USA Very Good Plus Used Condition We Made Cabinet& Interior Doors With This Cutter ~ We Did a Couple of Trophy Homes Up in Aspen for this Exceptional Interior Designer and She Would Say"Stan. Size Does Matter- The Bigger the Better" Thanks for Looking!
|
|
|
Shopsmith Shop Smith Shaper Cutter 4 Collars 1/2" Adapter 1/4" Mortising Chisel
Offered today: Shaper Cutter model number: 12 261 Set of 4 Shaper Collars: 12 235 1/2" Shaper Adapter: 12 232 1/4" Mortising Chisel(no drill bit) All items are vintage. But feel very sharp and look as if they were never used. Estate sale find.
|
|
|
LRH K-1101 shaper cutter molder carbide tipped 7/64" radius detail cutter 1-1/4"
Used for one short run.like new
|
|
|
Delta 43-059 3/4" Quarter Round Carbide Tip Shaper Cutter w/ 1" Bushing
Delta Cat. No. 43-059 3/4" Quarter Round Carbide Tipped Shaper Cutter 1 1/4" Hole with 1" Bushing This is in Good Condition. Used mostly on Poplar& Maple Winning bidder: Payment must be made with Paypal within 4 days of the close of the auction. If payment isn’t received within 4 days. A Non-Paying Bidder alert will automatically be filed. Please note that we will only ship the address that shows on the PayPal payment- please make sure the shipping address entered on the order matches the address on the PayPal payment. Your order WILL be placed on hold and will not ship until the shipping address matches the address on the PayPal Transaction Page. No International bidders.
|
|
|
Amana 922 Stile & Rail Cabinet Door Shaper Cutter Sets - 1-7/8" Material
CARBIDE Amana Tool No. 922 Very good condition. They have been used. But Appears to have very limited use. Still sharp. Items have been cleaned and inspected. Wing.Carbide Tipped; 1-7/8" Material Thickness; Cove& Bead Profile; 3/4" Bore- 3/16" 5/16" Radius; 1-3/4" Cutting Height; 3-1/8" Overall Diameter; 1/4" Width x 3/8" Depth Tongue
|
|
|
LRH K1429 1 inch radius Shaper Cutter
A used cutter in very good condition. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14767b8fbff-0x10f-
|
|
|
Big Large WOODLINE USA 3/4 SHAPER Cutter Bit Roundover WL-1515 1/2 / 3/4 Spindle
IN THE BOX USED 2-3 times. SEE PICTURES. IT'S BASCIALLY BRAND NEW. WOODLINE USA NUMBER WL1515 1 1/4" radius round over. Description: Woodline 1 1/4" Radius x 4 1/4" Diameter x 3/4" Bore. Has 1/2" bushing to accommodate 1/2" spindle or use without and it fits 3/4" spindle shaper. Bit sells for $ 55.00 new plus shipping at woodline.com. I'M RETIRING AND THESE(HAVE OTHERS LISTED) ARE FROM MY OWN PERSONAL COLLECTION. SOME OF WHICH I NEVER GOT AROUND TO USING. BUY IT NOW SALES POLICY: THIS ITEM IS BEING SOLD AS IS. Your satisfaction is my goal. If you want additional information. Or more pictures, please contact me. I ALWAYS TRY TO BE COMPETITIVE ON MY PRICING. That said. I'm always open to offers on fixed priced items. I'M HERE TO SELL MY ITEMS. Not dust them weekly and relist! AUCTION SALES ... morePOLICY: THIS ITEM BEING SOLD AT AUCTION AS IS. ADDITIONAL INFORMATION OR PICTURES WILL BE SENT ON REQUEST. Bid based on your own knowledge& the pictures as this sale is final. Please remember that once a bid has been entered. I can do very little to revise a listing(shipping, Buy It Now, etc. TO BE FAIR TO ALL, I DO NOT END AUCTIONS EARLY. YOUR BID IS A CONTRACT. If you are the winning bidder. You will enter into a legally binding contract to buy the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, or if payment is not received within 5 days, the item may be offered to the next highest bidder or relisted at the SELLERS SOLE DISCRETION. Buy-It-Now sales must be paid immediately(see invoicing below) INVOICING: If you'd like any shipping changes. Finalize payment AFTER you receive an invoice. Otherwise. Please go ahead and make payment per terms listed above and EBAY's policies. SHIPPING DETAILS: If there is shipping involved. All shipping will originate from MD 21762. Any shipping that will be USPS FIRST CLASS, PARCEL, PRORITY, OR MEDIA. I don't charge a handling fee(yet) ALASKA, HAWAII, U.S. PROTECT
|
|
|
SHOPSMITH 1/2" SHAPER ARBOR W/ CUTTER
NICE SHAPER ARBOR W/ WING CUTTER
|
|
|
Freeborn Raised Panel Back Cutter - PT-16-001 - 1-1/4" Bore - Shaper Cutter
Freeborn PT-16-001 shaper cutter with rounded profile for cutting backs of door panels. Use a back cutter when you want the door panel flush with the door frame. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 4.75" Bore = 1.25" Height =.625" for 3/4" material Pattern Length =.375" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1478ec02f13-0x10e-
|
|
|
Freeborn Door Edge Shaper Cutter - PT-17-112 - 1-1/4" Bore - 32mm Hinge System
Freeborn PT-17-112 shaper cutter for profiling door edges compatible with 32mm hinge systems. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 4.25" Bore = 1.25" Height =.625" for 3/4" to 7/8" material Pattern Length =.7" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Shaper Cutter, Insert Knives with Ogee Pattern, Industrial Quality - 1-1/4" Bore
Shaper cutter with ogee pattern. 3 insert knives on a steel body. Great condition- installed knives are sharp. Includes 6 extra new knives. Dimensions are as follows: Diameter = 8.25" Bore = 1.25" Height = 1.25" Pattern Length =.75" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Leitz Raised Panel Shaper Cutter - Industrial Quality - 1-1/4" Bore
Leitz shaper cutter with beveled raised panel pattern. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 160mm Bore = 1.25" Height = 20mm Pattern Length = 45mm Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn Raised Panel Shaper Cutter - PT-15-006 - 1-1/4" Bore
Freeborn PT-15-006 shaper cutter with ogee/bead raised panel pattern. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 6" Bore = 1.25" Height = For 5/8" material or 3/4" material when using a back cutter Pattern Length = 1-3/8" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn Raised Panel Shaper Cutter - PT-15-007 - 1-1/4" Bore
Freeborn PT-15-007 shaper cutter with ogee/double bead raised panel pattern. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 6" Bore = 1.25" Height = For 5/8" material or 3/4" material when using a back cutter Pattern Length = 1-3/8" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Shopsmith/Magna Flute & 1/4 Round Shaper Cutter, Great Shape!!
Shopsmith/Magna Flute& 1/4 Round Shaper Cutter. Great Shape! There are a couple dozen cutters/molders/arbor on other auctions. If you win at least 3 shaper/molder items. I will pay the shipping! Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith/Magna 1/4" & 1/2" Combo Qtr. Round Shaper Cutter, Great Shape!!
Shopsmith/Magna 1/4" 1/2" Combo Qtr. Round Shaper Cutter. Great Shape! There are a couple dozen cutters/molders/arbor on other auctions. If you win at least 3 shaper/molder items. I will pay the shipping! Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding! 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-147f2a2e4a5-0x109-
|
|
|
Shopsmith/Magna 1/4" Round & Cove Shaper Cutter, Great Shape!!
Shopsmith/Magna 1/4" Round& Cove Shaper Cutter. Great Shape! There are a couple dozen cutters/molders/arbor on other auctions. If you win at least 3 shaper/molder items. I will pay the shipping! Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith/Magna 1/4" Groove Shaper Cutter, Great Shape!!
Shopsmith/Magna 1/4" Groove Shaper Cutter. Great Shape! There are a couple dozen cutters/molders/arbor on other auctions. If you win at least 3 shaper/molder items. I will pay the shipping! Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith/Magna 1/2" Glue Joint Shaper Cutter, Great Shape!!
Shopsmith/Magna 1/2" Glue Joint Shaper Cutter. Great Shape! There are a couple dozen cutters/arbor on other auctions. If you win at least 3 shaper items. I will pay the shipping! Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
3-Wing 15 degree Bevel Shaper Cutter - Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing 15 degree Bevel Shaper Cutter. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 5.25" Bore = 1.25" Height = 1" total height Pattern Length =.5" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include ... moreall shipping and handling fees.
|
|
|
3-Wing Edge Profile Shaper Cutter - Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing Edge Profile Shaper Cutter. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 5.75" Bore = 1.25" Height = 1.25" total height Pattern Length = 1" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include ... moreall shipping and handling fees.
|
|
|
Shaper Cutter - 1/2" Flute, 3/4" Bore C2048 Grizzly
This Cutter is in fine shape and no nicks. Description Grizzly® 3/4" bore shaper cutter features top-quality C-2 carbide- the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit. These outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 R.P.M. Dimensions: Cutter Diameter: 2-5/8" Cutting Length: 1/2" Maximum RPM: 15.000 Your Price: $29.95 In Stock( for showroom pickup)
|
|
|
Freud EC-142 1/2 Inch Straight Edge Shaper Cutter
Freud EC-142 3-Wing 1/2 Straight Edge Shaper Cutter. 3/4 bore with 1/2 inserts. Very good condition. Low hours use. Used a few times in my shop. But sitting in storage for the last 2-3 years. Thanks
|
|
|
FREEBORN RAISED PANEL SHAPER CUTTER MC-55-005 3/4" BORE W/1/2" T-BUSHING
FREEBORN TOOL CO. SPOKANE, WASHINGTON. RAISED PANEL SHAPER CUTTER IN LIKE NEW CONDITION. NO CHIPS OR DAMAGE ANYWHERE. 4" DIAMETER. 3/4" BORE WITH 1/2" T-BUSHINGS. GOOD QUALITY CUTTER! ANY QUESTIONS, PLEASE ASK. GOOD LUCK BIDDING!
|
|
|
4-Wing Mitered Cabinet / Picture Frame Shaper Cutter Industrial Quality - 1-1/4"
Industrial Quality 4-wing Shaper Cutter for picture frames or mitered cabinet door frames. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 4.75" Bore = 1.25" Height = 3.125" total height Pattern Length = Approximately.375" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. ... moreShipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
3-Wing Edge Profile / Solid Crown Shaper Cutter Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing Edge Profile or Solid Crown Shaper Cutter. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 5.75" Bore = 1.25" Height = 1.25" total height Pattern Length = Approximately 1.25" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping ... morecosts stated in the auction include all shipping and handling fees.
|
|
|
3-Wing Double 1/4" Round Over Shaper Cutter Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing Double 1/4" Radius Round Over Shaper Cutter. Profile top or bottom edges in forward or reverse. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 5.25" Bore = 1.25" Height = 2.75" total height Pattern Length = Approximately 1.75" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be ... morereceived within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
3-Wing Panel Moulding Shaper Cutter - Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing Panel Moulding Shaper Cutter. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 6" Bore = 1.25" Height = 1.5" total height Pattern Length = 1" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include ... moreall shipping and handling fees.
|
|
|
3-Wing 5/8" Half-Round Shaper Cutter - Industrial Quality - 1-1/4" Bore
Industrial Quality 3-wing 5/8" Half-Round Shaper Cutter. Cuts fine- one face is chipped but doesn't affect the cut quality- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 8.25" Bore = 1.25" Height = 1.125" total height Pattern Length = 5/8" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via ... morePayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
2-Wing Solid Crown Shaper Cutter - Industrial Quality - 1-1/4" Bore
Industrial Quality 2-wing Solid Crown Shaper Cutter. Excellent condition- used for a small custom job. This cutter and similar cutters I have listed were purchased from Oella Saw and Tool who provide super quality items. I purchased this cutter reconditioned by them and used it less than 1 hour. Dimensions are as follows: Diameter = Approximately 7.25" Bore = 1.25" Height = 3.25" total height Pattern Length = Approximately 1.25" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated ... morein the auction include all shipping and handling fees. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1487697e067-0x107-
|
|
|
Freeborn PT-25-016 1" Radius Shaper Cutter
For sale is a Freeborn PT-25-016 1" radius shaper cutter. The bore is 1 1/4" And it is considered a commercial cutter. It was used for a single project and was retired for the last 25 years. The use involved less than 100' of 2" bullnose. There are no nicks and the cutter has never been re-sharpened. It comes in the box in which it has been stored.
|
|
|
STARK 3 WING HIGH SPEED STEEL 1" BULLNOSE SHAPER CUTTER SET - 4 1/2" DIAMETER
1 3/8" bore. This is a 2 piece set. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
STARK 3 WING HIGH SPEED STEEL 1 3/8" BULLNOSE SHAPER CUTTER SET
5 1/2" diameter. 1 3/8" bore. This is a 2 piece set. There is a small chip on the tip of one knife. It does not affect its use. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
L.R.H. 2 WING CARBIDE TIPPED 1/2" BEAD SHAPER CUTTER - 5" DIAMETER, 1 3/8" BORE
I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
RARE shaper cutter spindle molder 3 1/2" smoothedge collars 1 1/8" bore
1 1/8" possibly 28 mm bore 3 1/2" across 1" high This is the exact item you are bidding on
|
|
|
STARK 4 WING CARBIDE TIPPED 1/2" FLUTE SHAPER CUTTER - 4 3/4" DIAMETER
1 3/8" bore. I will gladly ship multiple items together as long as it is safe to do so. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148e0669ece-0x10a-
|
|
|
SY Grizzly C2207 Crown Molding Shaper Cutter 1" arbor 2" Wide
Slightly used crown molding cutterhead for a 1" arbor shaper. Sells for $145 new part c2207
|
|
|
shaper cutter spindle molder 3 1/4" tool holder 1" bore with tooling
1" 3 1/4" across 1 1/4" high This is the exact item you are bidding on
|
|
|
shaper cutter molder spindle 1 1/8" bore carbide tipped 1/4 round profile
3 wing cutter 1 1/8" possibly 28mm bore 4 across 1 1/2" high quarter round profile carbide tipped photos are actual item 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-1490d991ab0-0x112-
|
|
|
LRH Finger Pull Back Cut Shaper Cutter - 1" bore - Part# C1CE
LRH Finger Pull Back Cut Shaper Cutter- 1" bore Although scratched and stained. This cutter is hardly, if at all, used. It is sharp. Has no chips, and has not been resharpened. Has full carbide thickness. This is a back cutter for a 2-piece door lip set for cabinet doors. Also known as a door edge detail. This cutter can be stacked with any LRH front detail cutter. This cutter adds a finger pull to the back AND eases the very back edge of the door all in one pass. Spacers and/or shims would be used between the two cutters to create just the right match for the wood thickness being used. LRH Part# C1CE- 1" Bore- 3-3/8" Diameter- Cutter can be used by itself as a detail cutter
|
|
|
STARK 4 WING CARBIDE TIPPED TABLE EDGE DETAIL SHAPER CUTTER - 1 1/16" HIGH
1 1/16" high edge detail. 4 1/2" diameter, 35 mm bore. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DML shaper cutter molder 4 wing staggered hogging planing jointing 1-1/4 bore
1 1/4 bore. 3 1/8 high/cutting height. 3 carbide cutters per wing, 4 wings. used. as is.
|
|
|
12 wing shaper cutter molder Dado jointing 1-1/4 bore 8" diameter 1 15/16 cut
8" diameter 1 1/4 bore. 1 15/16 high/cutting height. Or use as a dado blade. 12 solid carbide cutters, 12 wings. used. as is.
|
|
|
Carbide Tip Shaper Cutter, 1/2" flute, 1 1/4" bore
Good used carbide tipped blade with little wear. No chips, approximately 3/16 carbide left on blade. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149a1136038-0x106-
|
|
|
Carbide Tip Shaper Cutter, 14" rundover, 1" bore
Good used blade. No damage, approximately 3/32 carbide left on blade
|
|
|
Delta 45-922 Cove & Bead Carbide Tip Shaper Cutter Set 3/4" Bores w/1/2" Bushing
Delta 49-922 Commercial Cove& Bead Carbide Tip Shaper Cutter Set. 3/4" Bores with 1/2" Bushings These have very little use on them. No extra charge for any sawdust left on them. Winning bidder: Payment must be made with Paypal within 4 days of the close of the auction. If payment isn’t received within 4 days. A Non-Paying Bidder alert will automatically be filed. Please note that we will only ship the address that shows on the PayPal payment- please make sure the shipping address entered on the order matches the address on the PayPal payment. Your order WILL be placed on hold and will not ship until the shipping address matches the address on the PayPal Transaction Page. No International bidders.
|
|
|
1/2" Shaper cutter- High-speed steel (HSS): Glue Joint or Tongue & Groove
Set of two matched shaper cutters for 1/2" spindle shaper. Used very little and sharp! Can be used to make either a glue joint or a tongue& groove. A bargain at this price!
|
|
|
LRH K-1427 King Cutters Concave 5/8" Radius Carbide Shaper Cutter 1" Bore
LRH Enterprises K-1427 Shaper Cutter 5/8" Radius Depth 1 1/2" Radius Opening 2" Cutter Height Bore 1" Cutter is in Good Condition. Used to make Stair Tread& Landing Tread Winning bidder: Payment must be made with Paypal within 4 days of the close of the auction. If payment isn’t received within 4 days. A Non-Paying Bidder alert will automatically be filed. Please note that we will only ship the address that shows on the PayPal payment- please make sure the shipping address entered on the order matches the address on the PayPal payment. Your order WILL be placed on hold and will not ship until the shipping address matches the address on the PayPal Transaction Page. No International bidders.
|
|
|
Shaper Cutter - 1 inch Straight Edge - 1/2 inch Bore
This is a very nice 1 inch straight edged shaper cutter with a 1/2 inch bore. I have listed the cutter as used but it appears it could be unused with just a but of surface discoloration(please see photos) I do not see a manufacturers name. Ship to USA only.
|
|
|
MAGNATE shaper cutter molder carbide tipped 1/4" convex radius 3/4" bore
MAGNATE shaper cutter molder carbide tipped 1/4" convex radius 3/4" bore Both now sharpened and honed. Ready to work. Diameter: 2 5/8" Radius: 1/4" Width: 1/2" Bore 3/4" carbide tipped, Used both now resharpened and honed. Ready to work. balanced and verified, 100% American Made, Useful in other woodworking applications. Please see photos what you see is what you get. Please feel free to contact me with any questions or concerns. Thanks for viewing happy bidding and have a great day! g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14ab44906b8-0x107-
|
|
|
Shaper Cutter Molder Slot Cutter 1/2" 1-1/4" Bore Used Sharpened
Shaper Cutter Molder Slot Cutter 1/2" 1-1/4" Bore Used Sharpened Sorry. This photo gallery requires that the Adobe Flash Player be installed. Freshly Sharpened Shaper Cutter Molder 1/2" Slot Cutter. 1-1/4" bore. 5" diameter. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges or customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. We do not cover this expense. Paypal or OTHER. Thank you for your cooperation. ... morePayment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with it's true value and full-value insurance, please do not purchase or bid. Thank you for your understanding. Please note that shipping charges include profesional packing in bubble wrap. Styrofoam p
|
|
|
Shaper Cutter Molder Double Angle Cutter 45DEG 1-1/4" Bore Used Sharpened
Shaper Cutter Molder Double Angle Cutter 45DEG 1-1/4" Bore Used Sharpened Sorry. This photo gallery requires that the Adobe Flash Player be installed. Freshly Sharpened Shaper Cutter Molder Double Angle Cutter 45DEG. 1-1/4" bore. 4-1/2" diameter. 1/2" depth. 1-3/8" opening. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges or customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. We do not cover this ... moreexpense. Paypal or OTHER. Thank you for your cooperation. Payment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with it's true value and full-value insurance, please do not purchase or bid. Thank you for your understanding. Please note that shipping charges inclu
|
|
|
Concave 3/8" Radius Carbide Shaper Cutter Molder 1-1/4" Used Sharpened
Concave 3/8" Radius Carbide Shaper Cutter Molder 1-1/4" Used Sharpened Sorry. This photo gallery requires that the Adobe Flash Player be installed. Freshly sharpened Concave 3/8" Radius Carbide Shaper Cutter Molder. 1-1/4" bore. 4-3/4" diameter. 1-3/8" thick. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges or customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. We do not cover this expense. ... morePaypal or OTHER. Thank you for your cooperation. Payment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with it's true value and full-value insurance, please do not purchase or bid. Thank you for your understanding. Please note that shipping charges include profesi
|
|
|
Shaper Cutter Molder Extended Quarter Round Concave 1/4" Cutter Used Sharpened
Shaper Cutter Molder Extended Quarter Round Concave 1/4" Cutter Used Sharpened Sorry. This photo gallery requires that the Adobe Flash Player be installed. Freshly Sharpened Shaper Cutter Molder Extended Quarter Round Concave 1/4" Cutter. 1-1/4" bore. 4-1/2" diameter. 1-3/4" opening. 2" thick. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges or customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. ... moreWe do not cover this expense. Paypal or OTHER. Thank you for your cooperation. Payment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with it's true value and full-value insurance, please do not purchase or bid. Thank you for your understanding. Please note th
|
|
|
amana tool corp, #61200 aluminum shaper cutter 100mm dia.x 1" bore. PLUS
WELCOME TO LEESATTIC DESCRIPTION: amana tool corp. 61200 aluminum shaper cutter 100mm dia.x 1" bore. PLUS in packages, 64 FO 16 shaper knife, 64F017 shaper knife. calling it used but looks like new. NOTE( if there is a letter& number code at the end of the title its for me has nothing to do with the items) BE SURE TO SCROLL TO THE BOTTOM TO SEE ANY QUESTIONS I HAVE ANSWERED AND ANY ADDED PICS AFTER IT HAS GOTTEN BIDS,thanks*please read all of ad before bidding.PLEASE remember we have no control over how long it takes the usps to deliver your package, we always ship fast! thanks: SHIPPING ECT. Multipule wins or purchases-we will combine your order and shipping will be based on the weight of all the items.ALL ORDERS COME WITH FREE DELIVERY CONFIRMATION! ebay now charges sellers a percentage on our shipping and so does paypal, many ... moretime we lose money on shipping costs, so please think of this before giving low ratings,thanks. PAYMENT:
|
|
|
#BX99K,V-Paneling,shaper cutter set,3.4" bore with 1/2" bushing,carbine tipped
WELCOME TO LEESATTIC DESCRIPTION: USED. BX99K,V-Paneling,shaper cutter set,3.4" bore with 1/2" bushing, 3 wing, carbine tipped, large dia. 2 7/8" cutting high 1" NOTE( if there is a letter& number code at the end of the title its for me has nothing to do with the items) BE SURE TO SCROLL TO THE BOTTOM TO SEE ANY QUESTIONS I HAVE ANSWERED AND ANY ADDED PICS AFTER IT HAS GOTTEN BIDS,thanks*please read all of ad before bidding.PLEASE remember we have no control over how long it takes the usps to deliver your package, we always ship fast! thanks: SHIPPING ECT. Multipule wins or purchases-we will combine your order and shipping will be based on the weight of all the items.ALL ORDERS COME WITH FREE DELIVERY CONFIRMATION! ebay now charges sellers a percentage on our shipping and so does paypal, many time we lose money on ... moreshipping costs, so please think of this before giving low ratings,thanks. PAYMENT:
|
|
|
Wood shaper cutter adapters (2) 1 1/4/ 1"
Allows 1 1/4 bore cutters to run on 1" shaft. Free Standard Mail
|
|
|
SEARS SHAPER CUTTER FOR 1/2'' SPINDLE 9-3289
SEARS SHAPER CUTTER FOR 1/2' SPINDLE 9-3289 NEVER BEEN USED. BOX IS JUST AGED FROM SITTING
|
|
|
Shaper Woodworking Four 1/4" Wing/Blade Cutter 1" Arbor
ITEM NAME& DESCRIPTION: Shaper Woodworking Four Wing/Blade Cutter Arbor. 1 inch arbor. Nice four inch blades. Could be used as is or re-grinded to desired shape. CONDITION OF ITEM: In excellent condition. FORM OF PAYMENT ACCEPTED: Paypal. Payment is expected immediately right after end of auction. Serious buyers only please. SHIPPING COSTS: Winning bidder pays calculated shipping fees(calculated according to winning bidder's mailing address) for standard parcel post rate shipping with delivery confirmation or by priority rate. Domestic U.S. shipping only. ABOUT THE SHIPPING COSTS: The shipping costs for this item not only covers USPS and/or UPS cost. The shipping costs also cover the costs of the shipping materials I use such as packaging tape to seal shipping box and protective packing materials such as bubble wrap. Styrofoam, etc. ... moreTherefore, I try to charge my buyers reasonable prices for shipping. Thanks for understanding. RETURNS ACCEPTED: AS IS items policy: I sell some items"As Is" for several reasons: I can't test them; they have a known flaw(or flaws) Or I know it works. Sometimes I'll know of one flaw. But not of another. I do not purposefully leave out vital information. I want you as bidders to make informed decisions. Please take that into consideration for any auction I note to be an AS IS auction. However. Most of the items I've recently sold. Provide all my buyers with 100% satisfaction. Thank you! MY RETURN POLICY: If buyer is not satisified with ebay purchased item, then buyer must have item shipped back to seller's mailing/physical address. Buyer is responsible for paying shipping costs in order to send item back to seller's address and item must returned the same way it was before shipping. After seller receives item back. Paypal refund will be transfered and deposited back into buyer's Paypal account. FEEDBACK: Feedback is very important to both buyers and sellers. I always post feedback for my buyers and appreciate feedback from you upon receipt of it
|
|
|
Wood shaper cutter, bead, 1" bore
No nicks in full carbide. 4" diameter. 1 3/4" high, 9/16 bead cut. Priority mail 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b593bb9a5-0x11c-
|
|
|
Shaper Cutter, Carbide Tipped, 1" Straight cutter, 3/4" Bore, Luxite
Used for demonstration a few times. In excellent condition. 1" Straight Carbide tipped Shaper cutter with 3/4" bore, Approximately 3" in diameter. Made by Luxite in USA. Free Shipping in the lower 48 States Only.
|
|
|
DELTA 09-105 Shaper Cutter 1/2" Spindle hole 1-1/2"x 1-7/8" straight
DELTA 09-105 Shaper Cutter 1/2" Spindle hole 1-1/2"x 1-7/8" straight
|
|
|
DELTA 09-104 Shaper Cutter 1/2" Spindle hole 1"x 1-7/8" Straight
DELTA 09-104 Shaper Cutter 1/2" Spindle hole
|
|
|
SPINDLE SHAPER CUTTER HEAD with LOCKEDGE 3/4" Bore and 2 1/2" Dia Lot# 627
SPINDLE SHAPER CUTTER HEAD with LOCKEDGE 3/4" Bore and 2 1/2" Dia Lot# 627. These are in real nice shape used but nice. Had these left over from our plant. Thanks for Looking
|
|
|
Raised Panel Carbide Shaper Cutter, Bevel Pattern, 3-Wing, 1" Bore, Face-up, CCW
Raised Panel Carbide Tipped Shaper Cutter. Bevel Pattern, 3-Wing, 1" Bore, Face-up, CCW Details: See drawing of tool in photos 6-1/2" Diameter Shallow Bevel Profile Wood is positioned Face-Up under cutter Cutter oriented to run CCW(counter Clockwise) 1" Bore 3-Wing Just Sharpened(first time) Razer sharp Custom made in USA by Carbide Tooling Design. Oakland CA(now out of business)
|
|
|
LRH K-1439 1 1/2" radius, 1 1/4" Bore three wing carbide cutter head for shaper
LRH K-1439 1 1/2" radius. 1 1/4" Bore three wing carbide cutter head for shaper in excellent condition. I am original owner and it was used lightly. Cost roughly $350 new. I have sold my shaper and no longer need the tooling.
|
|