|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. The mounting ... moreholes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy Can Use Any Size 5C Collet..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. The mounting ... moreholes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy Can Use Any Size 5C Collet..
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$8.00 Shipping Condition: New – Open box Location: Kissimmee, United States
Buy It Now
Free Shipping Condition: Used Location: Pasadena, United States Shopsmith 3 3/4” Lathe Faceplate that is still in the box never used. The item# is 505590.
Buy It Now
$18.20 Shipping Condition: Used Location: Jacksonville, United States Vintage Machinist Lathe Holding toolManufacture Unknown NOTE -Tool does have some movement but for the most part is rusted and locked up and will need ... morefreed up!Also the one hand crank is very rusted and partially rusted awaySold as is you see in photos with no returns and or no garuntees , ask questions before purchase and use photos as description THANKS ROYCheck out my other items!Be sure to add me to your favorites list!
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a 6" tool rest for the mini lathes. The post is 5/8" x 3-1/2" and a total height of 5 1/4" The tool rest edge is fully machined ... moreso it is straight and flat. Shipping on this item is free via USPS or UPS. I do ship internationally. Just email me your location and I will quote shipping to your country. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e0fe04e8f-0xf6-
Buy It Now
$8.00 Shipping Condition: Used Location: Altadena, United States VERITAS Tool-Setting Depth Gauge 1/8" to 1-7/8" wood working lathe machine. Nice condition.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Jet no. This is the drive belt for the Jet Mini lathes JWL1220 and 1220VS.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
$18.50 Shipping Condition: Used Location: Nevada City, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is the drive belt for the Jet JWL1221VS mini lathe. This is Jet no.
Buy It Now
$152.85 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Listing Description: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Durable and convenient. Simple design and easy to use. And We will provide you with high quality products. Product Specifications:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States Jet drive belt #JWL1236-1. This is the variable speed drive belt for the Jet JWL1236 VS lathe.
Buy It Now
$8.00 Shipping Condition: Used Location: Kissimmee, United States You get everything shown for one price.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This belt goes from the motor up to the variable speed sheave.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
$8.00 Shipping Condition: Used Location: Kissimmee, United States
Buy It Now
$15.00 Shipping Condition: Used Location: Kissimmee, United States You get the chuck and everything shown, it will fit any 5/8" shaft.
Buy It Now
$12.50 Shipping Condition: New Location: Freeland, United States Several other Delta wood lathes used a similar countershaft. If you wanted to add the countershaft to your direct drive lathe, the Delta p/n was 46-864. ... moreOn the left side of this bearing, in the area between countershaft support towers, we add a clamp collar and the compression spring just to the left of the bearing holder’s small end.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a 2" mini three jaw chuck. Two tightening rods are included.
Buy It Now
Free Shipping Condition: Used Location: Pasadena, United States Shopsmith Mark V 3 3/4" Lathe Faceplate. Free Shipping! This item is in go od used shape. These run almost $25 from t he factory. Please check out ... moremy other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and any of your 1-8 threaded accessories to the ... morespindle adapter. Failure to properly secure these components can result in injury.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Model A: 4 axis 6040. 2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The machine can connect with computer ... moreas other external device such as printer, scanner.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States May not be complete. No APO's or FPO's. Listed 994.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
$93.00 Shipping Condition: New Location: China All of the machines are safe touch except milling machines. It requests to be used under parents or teachers instruction when the milling machine is being ... moreused by the kids. Switching power input:AC110V-240V.
Buy It Now
$8.00 Shipping Condition: Used Location: Kissimmee, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 5140059-09. This is the drive belt for the Delta Midi lathe. 46-460 type 1 and 2. Shipping on this item is free via USPS or UPS. I do ... morecombine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. All shipments to Brazil must go Priority mail Express. All Brazilian shipping charges are on a quote only basis.
Buy It Now
$6.00 Shipping Condition: Used Location: Kissimmee, United States Shopsmith Mark V Lathe Cup Center. Free Shipping! It is in very good used shape as shown. I will pay all Shipping Costs! These would run you over $20 ... moref rom the factory. Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe. Note:.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Key Features: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. The mounting ... moreholes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy .
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States New Delta Rockwell 17" Drill Press Spindle Load Spring Washer SP-7352.
Buy It Now
$13.16 Shipping Condition: New Location: Canada
Buy It Now
$70.00 Shipping Condition: New Location: China It is mainly used for teaching, hobbies and other DIY works. Machine Material Carbon steel, Aluminum, ABS. Process material Soft-aluminum, brass, copper, ... morewood, plastics ect. The handwheel with accuracy of 0.02 mm scale line, increase the accuracy of the machine tool machining.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of bearings for the arbor assembly on the Laguna REVO 15/24 lathe. These are Laguna numbers PLAREVO1836-175 and 415241-117.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
$8.00 Shipping Condition: Used Location: Kissimmee, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 49-120.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Key Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong service ... moretime. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Please check product compatibility carefully to ensure it is the product you need. So as not to waste your time and energy on return. Details:.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
$6.00 Shipping Condition: Used Location: Kissimmee, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 46-490. This is a heavy duty ball bearing live center with a no. 2 Morse taper shank. This will fit all wood lathes with a No. 2 Morse ... moretaper internal tailstock taper. These will take the heat out of the tailstock center and keep it running truer and cool. The bearing is changeable when in wears out. This kit includes three interchangeable centers. One is a standard point. One a cup style point, and a flat face for stabilizing bowl blanks and platters. Shipping on this item is free via USPS or UPS. I do ship internationally, just email me your location and I will quote shipping to your country.
Buy It Now
$14.14 Shipping Condition: New Location: Banning, United States Our Lathe Chip Dust Hood has a hinged, clear viewing shield which can swing out of the way. Lathe dust collection is now easy. Clear hood for easy viewing. ... moreFits many style lathes.
Buy It Now
Free Shipping Condition: New Location: China Can work with hand, convinient woodworking tool. Perfect Wood Turning Performance. 1 x Wood turning tool with wood handle. Hardness of Blade: 90HRC. Color ... moreof Blade: Gold. 1 x Wrench. 3# Square round 15mm.
Buy It Now
$6.00 Shipping Condition: Used Location: Kissimmee, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This listing is for a brand new drive belt for the JET 1014 mini lathe headstock. This is good for a replacement of a damaged or broken one or just to ... morehave one as a spare. Please take a look through our and view our other woodworking accessories. We will be glad to combine shipping with our other items. We appreciate you viewing our listing!
Buy It Now
$18.28 Shipping Condition: New Location: Canada General 260 Riser Block Kit with Belt. Includes Bolts but Missing the Tool Post Extension. Stock# 269-VV For Cast-iron headstock and tailstock. To increase ... morewood turning capacity from 12" to 20". For Lathe Models 260 and 26020 only. Variable Speed Only These are new and have never been used. But have been stored away for the last 20 years. Hard to find item. Any questions please ask.
Buy It Now
$3.50 Shipping Condition: New Location: China ERGONOMICS TOOL HANDLE - Hard and Solid beech wood ， Ergonomics design makes it more comfortable while doing turning job. Features a square shaft so the ... moreflat back can be kept flat on the tool rest and level with the floor.
Buy It Now
$12.90 Shipping Condition: Used Location: Chico, United States You'll get exactly what you see in the photos.
Buy It Now
$11.83 Shipping Condition: New Location: Florence, United States Item: Lathe Contour Sander Sleeves.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is the drive belt for the Jet JWL1221SP mini lathe. This is Jet no.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Jet no. This is the variable speed pulley set for the MOTOR arbor on the JWL1442 lathe. These are only sold as sets. This should be a slip fit ... moreso the pulley can slide on the shaft.
Buy It Now
$5.85 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description:.
|
|
|
|
antique pattermakers wood lathe crosslide compound- made of wood
antique pattermakers or wood lathe compound crosslide moves relatively freely. Is made of wood with some cast iron and metal parts. roughly 5" x 7" not counting the two bottom mounting pieces Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
|
|
|
5 Cobalt HSS Key Way Woodruff Cutters Machinist Gunsmith Milling Lathe Tools lot
This auction is for a lot of 5 Woodruff Keyway Keyseat Cutters. With 1/2 inch shanks Cleveland Twist Drill CO. 606. Morse 304, KEO 213 403, KEO 201 202, and one unmarked Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures Below show items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
MINT GENERAL 160 CANADA 3" CAST IRON WOOD LATHE FACE PLATE 1" 8 tpi
This Sale is for ONE EXCELLENT GENERAL CANADA 3" CAST IRON WOOD LATHE FACE PLATE 1" 8 tpi. A 6 scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north ... moreAmerica. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.If any legal action ensues,the buyer agrees to pay all legal costs of the seller regardless of the outcome. Machine Sa
|
|
|
Myford ML8 Wood Lathe New Design Tailstock Handwheel C1836 Rare on ebay
For Sale New Design ML8 Tailstock Handwheel Assembly. Part Number C1836. Bought from the Myford works in Beeston Nottingham years a go by my dad. Been gathering dust in shed never fitted to machine. Longer length than original so you don't catch your hand on barrel as much. Rare to see on ebay. Few small cosmetic blemishes but still looks nearly new. International buyers message me so I can get correct postage for your country.
|
|
|
Shopsmith Mark V Lathe Drive Center, Free Shipping!!
Shopsmith Mark V Lathe Drive Center. Free Shipping! It is in very good used shape as shown. I will pay all Shipping Costs! These would run you nearly $30 f rom the factory. Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
COLLECTION of 6 LATHE CHESILS MADE IN ENGLAND
NICE COLLECTION of SIX WOODWORKING LATHE CHESILS.ALL MADE IN ENGLAND FIRST TWO.MADE BY.ASHLEY ILES.MADE IN ENGLAND.both have copper collars. 9 inch blade.12.1/2 inch handle.including collar. 6.1/4 inch blade.11 inch handle.including collar.this chesil has a adjustable gauge that slides.with two brass tightening screws. Third chesil.HENRY TAYLOR.MADE IN ENGLAND.T37.6inch blade 13inch handle including collar. two ROBERT SORBY chesils and a altered MARPLES chesil. UK POSTAL £9.25.via courier.
|
|
|
GRADUATE_LATHE_TOOL_REST_Used
For SALE: HARDLY USED- Solid Caste-Iron Steel-GRADUATE_LATHE TOOL REST'J 16 1' as shown Weighs: 1255g Shaft Diameter: 26mm Rest span: 15.5cm Tool Height: 12.5cm Please read my terms before bidding: Accessories that are not listed here. Will Not be included in this auction. If you unsure then please contact us before bidding. BEING SOLD'AS IS' NO RETURNS! PAYMENT REQUIRED WITHIN 24 HOURS after auction ending. Overseas shipping varies. So please contact us before bidding. Buyer pays all packaging. Insurance and shipping and is responsible for Customs/ VAT duties of their country. Courier service to APO/FPO/DPO addresses is unavailable. Please see my other items listed for sale. IMPORTANT: Less than TEN positive feed-backs must contact us before bidding. Time-wasters will be notified to eBay. Do Not Respond to an email about ... moreany of our auctions from any address other than eBay.
|
|
|
Yates American No. 12 Wood Lathe Tailstock
This came off of a Yates American No 12 Wood Lathe. It has a 12" swing. The gap between the two bed ways is 1-1/2" I don't know what the spindle taper is.it's not Morse Taper. 35 Pounds Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
Shopsmith Lathe Duplicator
Shopsmith Lathe Duplicator. Very good shap e. All of the items are in very good used shape with minimal sig ns of use. You get every thing you see. However I'm missi n g the mounting bolt s fo r the 12" shield. Th is setup would cost you well over $ 450 f rom the factory. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith Mark 2 Lathe Toolrest, Good Shape!!
Shopsmith Mark 2 Lathe Toolrest. Good Shape! It is an 8" toolrest. The company doesn't produce the Mark 2 anymore. So this item can help you keep your unit original. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Craftsman Vintage Professional 8 pc. Lathe Chisel Set, Great Shape!
Craftsman Vintage Professional Lathe Chisel Set. Great Shape! All 8 chisels are in very good condition. A few haven't even been sharpened. Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith lathe end mount
Excellent shape. 1/4" one is useful beyond router bits. For instance the variety of drum sanders with those shafts. Priority mail. Buyer pays 9% tax 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f1638359b-0x103-
|
|
|
Shopsmith 4" lathe mounting disk
Excellent shape. Priority shipping. California buyer pays 9% tax
|
|
|
Shopsmith lathe end mounts
Excellent shape. Probably never used. Priority shipping. California buyer pays 9% tax
|
|
|
Rosette Cutter Head Lathe Shaper Custom 8" Dia
Rosette Cutter Head Lathe Shaper Custom 8" Dia· This is a custom designed. One-of-a-kind cutterhead· Designed to cut large diameter rosettes and small radius profiled wooden parts· Mounted on a lathe headstock or other type of 1-1/2" threaded spindle· Uses standard corrugated knife stock· Head diameter = 8" Runs 2 knives. Max width 3-1/4" with option for running 2 more perimeter knives 1-1/2" width· Wt = 19 lbs· Includes one set of miscellaneous knives as a sample· For the custom shop or plant with the need for specialty parts· Original price exceeded $2500· Postage includes careful packing and fast shipping· Excellent condition
|
|
|
Wood lathe jackshaft bearing set craftsman delta rockwell walker turner
Complete set of 4 jackshaft bearings for a wood lathe. excellent condition- half inch. Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
|
|
|
Mini Lathe Wood working Carba-Tec with Craftsman Swiss Turning Tools Anvil
Mini Lathe Wood working Carba-Tec with Craftsman Swiss Turning Tools with mini Anvil and vice Great working 24 inches by 3 inches woodworking Mini lathe with 15 multiple turning tools on a board with mini vice and anvil 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f4894d6ee-0xfd-
|
|
|
Delta lathe tools for Shopsmith
Seem to have only been tested. Good as new. California buyer pays 9% tax.
|
|
|
carba-Tec Mini Wood Lathe Motor pully
FOR_ PARTS; Motor pulley 2 step id. of shaft.315. i ship very fast in 24 hrs or less 5-1/2 days a week USPS
|
|
|
Carba-Tec Mini Wood Lathe Head stock
FOR_ PARTS; Head-Stock Its a 6"x12" 1 morse taper& 3/4-16 threads; Headstock; has the belt& screws included. i ship very fast in 24 hrs or less 5-1/2 days a week USPS
|
|
|
Phoenix EZM by Magnum CNC Wood Lathe with Dust Control Vacuum Used
Phoenix EZM by Magnum CNC Wood Lathe with Dust Control Vacuum(see Photo 4) Overall Size ~ 48" H x 38" W x 20" D CONDITION: Used. As Is Must Ship by Freight or Local Pickup* Pictures are taken at the time of listing. If it's not in the photos. It's not included in the lot, unless otherwise stated directly in the ad. You Do Not Get The Thermocouple or The Tape Measure* Available for local pick up at our office in Hayward. California Shipping quoted includes any handling charges plus UPS Ground(5-7 days) Insured, to the lower 48 States only. If you need it shipped elsewhere, please contact us for a shipping quote. Depending on your location, your shipping may be less, in which case we will refund the difference. Returns are accepted within 14 days. Re-stocking fees may apply. Please see our full return policy for details. ... moreIf you have questions or concerns. Please message us, or call Liz or Beth at 510-784-1111. We're here Monday-Friday. 8 am- 4:30 pm PST, and at other times by chance! ~ Thank You For Shopping ~! 11B-1-SR 4512W Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MORSE TAPER 2 MT2 LATHE TURNING SCREW CENTER CENTRE ATLAS CRAFTSMAN WOOD
MORSE TAPER 2 SCREW CENTER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Woodworking machine lathe-collets of various sizes 12pc
For sales is 12 pcs wood working machinery lathe collets for various bits sizes. Details: Overall length/height: approximate 67mm or 2 3/4" see picture 1) Diameter of the base(neck) 11/16" see picture 3) Collet for bit OD sizes: 6mm 7mm 7.5mm 8mm/ 5/16" 9mm 3/8" 10mm 11mm 7/16" 14mm 9/16" 15mm welcome to ebay shop- toolingstation combined postage provided
|
|
|
Woodworking machine lathe - component & part
For sales is 4 pcs wood working machinery components. welcome to ebay shop- toolingstation combined postage provided
|
|
|
Shopsmith 8" Lathe Toolrest NICE!!!
You are bidding on a Shopsmith 8" Lathe Toolrest. Thanks for looking.
|
|
|
6 SORBY LATHE TOOLS
LOOK TO BE UNUSED. BUT HAVE RUST FROM IMPROPER STORAGE. THE RUST ISN'T DEEP. WOULD PROBABLY COME OFF WITH MINERAL SPIRITS AND SOME SCOTCH-BRITE. IF NEEDED. I'M NOT A WOODWORKER. SO I DON'T KNOW IF IT IS NEEDED TO SPEND THE TIME AND EFFORT TO REMOVE THE RUST, SO I WON'T. THESE TOOLS ARE LONG. APPROXIMATLY 19 INCHES, SO IT WILL TAKE A LARGE/LONG FLATE-RATE BOX, TO SHIP. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Shopsmith lathe screw mount
Excellent shape. Priority Mail. California buyer pays 9% tax.
|
|
|
+++CARBA-TEC+++ECONOMY MINI LATHE+++CML4SE+++L@@K+++
CARBA-TEC* Economy Mini Lathe*CML4SE* A small lathe with five spindle speeds. The headstock. Bed and tailstock are constructed of cast iron and the 375 watt induction motor has more than enough power for projects likely to be produced on a lathe of this size. There is a hand crafted platform with drawer for storing all the tools you will need for your projects. THANK YOU FOR LOOKING AND HAPPY BIDDING. PAYMENT METHODS: PAYMENTS TO BE RECEIVED BY NO LATER THAN SEVEN DAYS(ONE WEEK) AFTER AUCTION ENDS. WE USE THE GLOBAL SHIPPING PROGRAM ONLY FOR INTERNATIONAL SHIPPING BID WITH CONFIDENCE. PLEASE GIVE US FEEDB ACK AND WE WILL DO THE SAME. IF THERE IS ANYTHING UNUSUAL OR HAVE TROUBLE FINDING. PLEASE SEND A REQUEST AND I WILL SEE IF WE HAVE IT OR CAN GET IT.
|
|
|
5 SORBY WOOD LATHE TOOLS MADE IN SHEFFIELD ENGLAND
LOT OF 5 SORBY WOOD LATHE CHISELS. THE HANDLES ARE 11 1/2" LONG AND THE BLADES APPROX 7" LONG THANK YOU
|
|
|
Shopsmith Mark V 3 3/4" Lathe Faceplate, Great Shape!!
Shopsmith Mark V 3 3/4" Lathe Faceplate. Free Shipping! This item is in great used shape. These run almost $25 from t he factory. Please check out my other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith Lathe Chisel Set 505586 Good Condition Shop Smith
Up for sale is a lightly used Shopsmith lathe chisel set. Part number 505586. The set is in good condition. Only had light use. TERMS: Payment is to be received within 7 days of auction end. Please email any questions before bidding. All sales are final. Payment via PayPal or contact buyer to arrange alternate payment method. Buyer pays actual shipping(see shipping calculator) Illinois residents will be charged 7% sales tax. We will only ship to the continental US. We will gladly combine shipping on multiple purchases that can be shipped together.
|
|
|
NICE POWERMATIC WOOD LATHE
THIS ITEM IS NOT FREE SHIPPING AND IF IT SHIPS TO CANADA.BUYER MUST PROVIDE ALL-ALL PAPERWORK NESSESARY FOR CUSTOMS.HERES A VERY NICE USED POWERMATIC MODEL 90 WOOD LATHE,THIS WAS USED IN A LARGE SCHOOL AND DOES NOT HAVE A LOT OF HARD USE,COMES WITH THE OSHA APPROVED GUARD THAT TIPS UP,THIS IS A 208/230/460 VOLT THREE PHASE INPUT,COMES AS YOU SEE IT IN THE PHOTOS,NOTHING MORE,IF IT IS NOT SHOWN,YOU WILL NOT RECIEVE IT,WE WIL SECURE AND WRAP ONTO SKID MEASURING 72 X 48 AND WILL WEIGH APPROX. 600 BS READY FOR SHIPPING, FREIGHT QUOTES CAN BE OBTAINED BY CALING THE PERSON LISTED BEOW AS WE CANNOT GIVE THEM GLOBAL SURPLUS MACHINERY We are a large surplus dealer of new and used equipment located at 1729 N 2nd Street. Minneapolis, MN 55411 Stop in or contact us to see thousands of other pieces of surplus equipment! 612-302-9469 Check out our eBay ... morepartner"Global-Machinery" for MANY MORE items! Our items are sold strictly as-is. Untested. Unless otherwise noted in the description. Even on tested items, we cannot offer any guarantee or warranty. We do not accept returns or issue refunds. However, if you do happen to experience a problem with your item, please contact us immediately. We are a small company that can work with you to immediately address your issue. No automated phone system here! You can ALWAYS pick your item up at our warehouse instead of having to freight or ship it! IMPORTANT-SHIPPING POLICY- IMPORTANT! If your item is large/heavy enough to warrant freighting. That's how it must leave our warehouse, unless you pick it up yourself. Freight can be expensive sometimes, especially on very large and heavy items: IF you have a PROBLEM spending the money required to ship your item, DO NOT BID! We cannot offer you any better rates than what you can obtain yourself. For freight inquiries. You can contact Scott Cyrus at UTI Transport Solutions located in Silverado, CA. Tel: 714-710-9078 or Scyrus(AT)go2uti(DOT)com- PLEASE NOTE that you will have to remove the parentheses and make the AT and DOT int
|
|
|
DELTA ROCKWELL Milwaukee TOOL REST Base Banjo for 12" Wood Woodturning LATHE
This Sale is for ONE Excellent used DELTA ROCKWELL USA TOOL REST Base or Banjo as it is sometimes called for 12" Delta Rockwell Lathe. The Holder is being sold as is and as seen in photographs. Has a much heavier duty clamp block on the bottom than most i have seen. missing the bolt that tightens to hold the tool rest post otherwise appears to ne in excellent condition. A rule or tape measure scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have ... morecustoms or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possessio
|
|
|
Shopsmith Mark V 4" Specialty AND 8" Lathe Toolrest, Free Shipping!
Shopsmith Mark V 4" Specialty AND 8" Lathe Toolrest. Free Shipping! Having both will help you set up a bette r lathe pos ition when turning your workpiece. I will pay all Shipping Costs to the lower 48 S t ates! New s etups will cost you well over $100. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Pultra Watchmaker's Lathe
Pultra watchmaker's lathe in excellent used condition. Runs great. Has good head stock with no play. Tail stock with drilling attachment, cross slide with reference marks and has its inbuilt indexing arm. Has its motor, a set of pulleys for adjusting speed, polishing attachment, drip tray, motor holding tray and 4 10mm colletts and a couple of tooling attachments. Has a tool post on the cross slide. Lathe is in dirty condition, has a few chips to the paint but no major knocks or problems. This is definitely one not to be missed in this complete condition, hence the starting price. Who ever buys this will not be disappointed. My husband has not used it for a few years but is retiring due to ill health, but has checked it out to make sure it is running and everything is okay. Although the motor is working and in good condition please have ... moresomeone check the wiring to cover both me and you. I have quoted a UK only postage price, or pick up in person if you prefer. If you are bidding from abroad I will have to calculate a postage price depending on which country you are in- but it is not cheap! Sorry.
|
|
|
Shopsmith lathe accessories, 4" plate, Screw mount for small turnings
Both lightly or never used. Priority Mail. California buyer pays 9% tax.
|
|
|
Delta lathe tools for Shopsmith, set of 8, cased
About as perfect as they could be. Slight indication of testing a couple. Parcel Post/ California buyer pays 9% tax.
|
|
|
powermatic wood lathe with tools and accessories
LATHE IN EXCELLENT CONDITION CAN TURN OUTBOARD FOR ITEMS LARGER THEN 20 INCH IN DIAMETER bED EXTENSIONS AND OUTBOARD TOOL REST AVAILABLE FRON MANUFACTURER wILL DELIVER FREE OF CHARGE WITIN 250 MILES OF hARRISON aRKANSAS
|
|
|
Rockwell Wood Lathe Sanding disk
As shown in Pictures. I believe the previous owner had this for his Rockwell wood lathe. It takes a 1 x 1.5 inch threaded spindle and employes stick on sanding disks. The one small hole already in it is factory drilled to allow air to escape when a new disk is installed. Its also possible to use it as a surface plate for a metal lathe if you are up cutting the necessary slots and holes to suit your needs. Paypal only Please. Shipping will be USPS priority mail or parcel post if that would be cheaper. Please wait to be invoiced to see if can save you anything on this.
|
|
|
Oliver or Yates Wood Lathe Hollow Chuck 2" 1 1/8" -8 Mount Patternmakers
SOTTOF SALES Has part number 240-C on back. Mounting thread is 1 1/8"8 RH the ID between the points of the splines is 2" the od is 3 3/4" and the length is 4 1/2" very nice condition heavy duty chuck that weighs about 4 lbs. Fits many Oliver lathes such as Model 51, 159, 167, 2159, some Yates American or Jline lathes and maybe other lathes have this spindle thread. D3745.5 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded ... morebidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
Oliver or Yates Wood Lathe Hollow Chuck 2.5" 1 1/8" -8 Mount Patternmakers
SOTTOF SALES Has part number 240-D on back. Mounting thread is 1 1/8"8 RH the ID between the points of the splines is 2 1/2" the od is 3 3/4" and the length is 4 1/2" very nice condition heavy duty chuck that weighs about 5 3/4 lbs. Fits many Oliver lathes such as Model 51, 159, 167, 2159, some Yates American or Jline lathes and maybe other lathes have this spindle thread. D3744.8 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by ... morethe awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
OLIVER Woodworking - Lathe Chuck
OLIVER Woodworking- Lathe Chuck- USED- 4115-0201-0201U The chuck shown in the picture is a new one(they are also available. Give us a call) The ones we are selling are not as shiny& have a few dings. 2-1/4" 57 mm) Thread: 1-1/8" 8-tpi For Oliver Lathes models: 51. 159, 167, 2159 These are original Oliver parts. Manufactured from the original Oliver prints& made to Oliver's high standards! ============================================================================= If you need parts for any Oliver Woodworking machine. We can help Give us a call(616-997-2211) or visit us on the web at www.eaglemachinery-repair.com Through a partial buyout of Oliver Machinery of Grand Rapids MI. We can provide you with OEM parts for most Oliver woodworking machines manufactured before 1999
|
|
|
Shopsmith Mark V Lathe Duplicator Manual, Free Shipping!!
Shopsmith Mark V Lathe Duplicator Manual. Free Shipping! This manual will ass ist you in getting the mos t out of your Shopsmith a nd is a v alu able ass et to your library. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith 8" Lathe Tool Rest, Post and Arm, Mark V Series Model 510
Up for bid is a Shopsmith Mark V series post. Arm, and 8" lathe tool rest for a 510 series.
|
|
|
Shopsmith Mark V Lathe Tailstock, Awesome Shape!!
Shopsmith Mark V Lathe Tailstock. Awesome condition! This item is used to support the end of the workpiece while turning. These would run you nearly $85 f rom the factory. This item came from a unit that was never used. Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith Lathe Screw Center (MKV, 510, 520) In the tube - Great Condition!!
Shopsmith Lathe Screw Center in the tube! Works on your MK V. 510, 520 and is in Great Condition! See the pics No questions asked return policy No mark up shipping. You pay what the PO would charge me No stock images. This is the item you are bidding on I do combine shipping. So you do save on multiple purchases
|
|
|
Antique Wood Lathe Blacksmith Made Woodturning Wood Lathe DOUBLE TOOL REST 45"
This Sale is for ONE NICE VINTAGE LARGE DOUBLE TOOL REST 45" LONG. Appears to have been made by a blacksmith as far as i can tell. Came with a very old wood lathe i once had! Please see photographs for more detail. Approximatey 1" Posts. A ruler or scale shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way ... moreto know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of
|
|
|
Union Graduate Woodturning Lathe Operator's Handbook.
Union Graduate Woodturning Lathe Operator's Handbook Union Graduate lathe. Showing parts list and exploded diagrams, also brief details of lubricating, replacing bearings etc. plus details of the sanding table and lampstand long boring attachment. front cover varies in colour will be packaged well to protect the booklet.
|
|
|
Lathe Radial Rest M6-326, 2.5" Opening
This is an old attachment for a lathe. We no longer have the lathe. And found this while cleaning out our shop. I don't know who made it or when, but the model number M6-326 is stamped on the side. The circular part with the fingers is 2.5" across, so it will accommodate smaller works that need stabilization while turning.
|
|
|
Oliver Wood Lathe knock Out Bar Holder
nice knock out bar holder for oliver wood lathes. this came odd a 159 machine. Great condition, needs to be stripped and painted for you restoration. made of cast iron
|
|
|
Lathe working tool support block_______4686/9
lathe tool holding block 6 inch width 1 inch diameter has 3 holes drilled thru it 5/16 inch diameter of holes we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees
|
|
|
Lathe Face Plate 10 3/4" Outside Dia. 2 Inch Hole, 1 1/2 Inches Thick TPI-7
Face Plate 10 3/4 Inches Outside Diameter 2 Inch Hole 1 1/2 Inches Thickness Threads Per Inch 7 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon ... morethe type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold
|
|
|
*WORKING* 1940's Sears Craftsman 103.23071 9"x 30" Bench Top Wood Metal LATHE
UP FOR GRABS IS AN EXTREMELY POPULAR AND HIGHLY COLLECTIBLE VINTAGE CRAFTSMAN 9" LATHE USED FOR METAL AND WOOD. MANUALS FOR THIS ARE ALL OVER THE INTERNET AS WELL AS RESTORATION GUIDES IF YOU FELT THE DESIRE TO COSMETICALLY DRESS THIS UP: THIS LATHE IS FULLY FUNCTIONAL(BEARINGS ARE ALL FREE. KNOBS, ETC ALL WORK, AND THERE ARE NO DAMAGED SCREW THREADS, NO RUSTY BOLTS, ETC. TYPICAL SIGNS OF USE INA 1940'S LATHE. PLENTY OF PICTURES FOR YOU EXAMINE: LATHE FRAME IS STRAIGHT AND NOT BENT. THIS WILL BE SHIPPED VIA GREYHOUND PACKAGE EXPRESS DUE TO WEIGHT AND SHEAR SIZE. PAYMENT IS DUE WITHIN 48 HOURS OF AUCTION END TIME. READ ENTIRE LISTING BEFORE BUYING& PLEASE ASK ANY AND ALL QUESTIONS PRIOR. BE SURE YOUR ADDRESS IS DELIVERABLE SHIPPING PRICE IS ONLY WITHIN CONTINENTAL UNITED STATES. ALL OTHERS MESSAGE ME BEFORE BIDDING WITH FULL SHIPPING ... moreADDRESS FOR QUOTE: ONCE GREYHOUND SERVICE ACKNOWLEDGES ACCEPTANCE OF YOUR PACKAGE YOU HEREBY AGREE THAT YOU WILL HOLD ME HARMLESS FOR ITS REPLACEMENT. IF NOT RECEIVED YOU AGREE TO RELY SOLELY UPON INSURANCE AND THE TRACKING SYSTEM IN USE. AT THE TIME OF ACCEPTANCE FROM ME, BY GREYHOUND SERVICE. Posted with
|
|
|
Carba-Tec Wood Lathe BED
FOR_ PARTS; BED ONLY.21-3/4" overall long; rails are in center 1-1/16" outside of rails 2-15/16" I ship very fast in 24 hrs or less 5-1/2 days a week USPS; NOTE* Local pick up Free
|
|
|
Wood Lathe Chisel, Foot Print, Scraper , made in England
Mase in England Wood Lathe chisel. Scraper, Foot Print. 17" long. 1/2" wide. i ship very fast in 24 hrs or less 5-1/2 days a week USPS
|
|
|
Wood lathe Dead Centre morse #2 Taper usable condition.
Wood lathe Dead Centre morse#2 Taper usable condition.Pickup in Nunawading or post.
|
|
|
Vintage 1940's Sears Craftsman 103 - 23070 46" Bench Top Wood Metal Lathe
As shown. A vintage 1940's 46" overall length) Sears Craftsman Lathe#103.23070. Sorry but local pick up only, shipping is not available for this item. Please feel free to ask any questions and thanks for looking!
|
|
|
UNUSED ONE WAY STRONGHOLD 4-1/2" WOOD LATHE CHUCK,JACOBS DRILL CHUCK,EXTRAS
ONE WAY STRONGHOLD 4-1/2" CHUCK WITH 5/8" STRAIGHT ARBOR(UNUSED) WITH KEY. JACOBS 5/64-1/2" DRILL CHUCK WITH 5/8" MOUNTING HOLE. WITH KEY. SPUR WITH 5/8" MOUNTING HOLE. 2 MORSE TAPER ARBOR WITH 5/8" SHAFT FOR MOUNTING SPUR OR EITHER CHUCK. 3 TO#2 MORSE ADAPTOR SLEEVE. MISC HEADSTOCK CENTER.
|
|
|
SHOPSMITH MARK V 500 POWER COUPLER LATHE JIGSAW MOLDER
UP FOR AUCTION IS A SHOPSMITH MARK V 500 POWER COUPLER IT IS USED BUT IN GOOD CONDITION. THERE ARE NO CRACKS IN THE PLASTIC. I AM SELLING SEVERAL SHOPSMITH PARTS& AM HAPPY TO COMBINE SHIPPING PLEASE EMAIL ANY QUESTIONS PRIOR TO BIDDING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Rockwell Delta 12" WOOD LATHE Head Stock HEADSTOCK Item No. K2
Rockwell Delta 12" WOOD LATHE Head Stock HEADSTOCK Item K2. The head stock is used. And has no cover, and the indiexing pin is broken. The paint is chipped, scratched and dirty please see photographs. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability ... moreof the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use,
|
|
|
Morse Taper 1 - MT1 Live Turning Revolving Center / Live Center - MT 1 - LATHE
Up for bid 1mt live center used but in great condition. Posted with
|
|
|
Shopsmith Mark V. Lathe Centers, Live & Spur
Used live& spur center from a Shopsmith Mark V. Good used condition. See pics for more details. I will combine shipping whenever I can. Check my other listings for more Shopsmith parts and accessories. Paypal please.
|
|
|
ONE WAY STRONGHOLD 4" WOOD LATHE No. 2170 CHUCK 3/4"-16 mount complete in box
A model 2170 One Way lathe chuck for woodworking. 4 jaw universal with 3/4"16 mounting plate. Complete with all wrenches. Instructions sheet and original box. Appears to have had little if any use. Thanks for looking
|
|
|
Shopsmith 90-degree Specialty Lathe Toolrest w/ Bonus!!!
Shopsmith 90-degree Specialty Lathe Toolrest with stock 8" toolrest as a bonus! It is in great used shape as shown. Showing little signs of use. This item will help you set up a bette r lathe pos ition inside your bowl and other tasks. Why not treat yourself? New s etups will cost you nearly $29 for the Specialty rest alone. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Robert Sorby Bead Forming Lathe Chisel, Free Shipping!
Robert Sorby Bead Forming Lathe Chisel. Free Shipping! It has a spread of 6 MM/1/4" This will help you cut semi-circular beads on your workpiece. I will pay all Shipping Costs to the lower 48 S t ates! Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
4" Steel Lathe Faceplate, Great Shape!!
4" Steel Lathe Faceplate. Great Shape! This item is in great shape. It has a.65" threaded arbor. It may be metric. I'm not sure of the manufacturer. Please check out my other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144b5cfd228-0xf9-
|
|
|
8" Steel Lathe Faceplate, Great Shape!!
8" Steel Lathe Faceplate. Great Shape! This item is in great shape. It has a.69" threaded arbor. It may be metric. I'm not sure of the manufacturer. Please check out my other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
6" Lathe Faceplate, Great Shape!!
6" Lathe Steel Faceplate. Great Shape! This item is in great shape. It has a 1/2" arbor. The neck is 1.25" deep. I'm not sure of the manufacturer. Please check out my other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Nakamura Tome CNC Lathe Model TMC 20II
Nakamura Tome CNC Lathe Model TMC 20II General Specifications: FanGeneral Specifications uc Control Model 18-T Parts Catcher Lots of Tooling Machine Is In Excellent Condition FOB Colorado Machine Weight 6000 lbs NOTE WE DO NOT TAKE PAYPAL FOR PAYMENT
|
|
|
Shopsmith Mark V 2-position Lathe Toolrest Upgrade!!!
Shopsmith Mark V 2-position Lathe Tool Rest Upgrade! This item will upgrade your existing tool rest and is in very good shape as shown. The two positions will help you set up a bette r lathe pos ition to complete your tasks. Why not treat yourself to an upgrade? New s etups will cost you well over $100. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith lathe tool rest, dual post
Good functional and cosmetic shape. Regular Post. California buyer pays 9% tax.
|
|
|
Shopsmith live lathe mount
This bearing active mount solves the problem of stock chewed up by the fixed end mount. Good smooth and cosmetic condition. Priority Mail. California buyer pays 9% tax di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-144e6414653-0x111-
|
|
|
MACHINIST TOOLS LATHE Stanley Number # 45 Wood Plane ALL ORIGINAL
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. Seems to be all original. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO ... moreSATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
|
|
|
Wood Working LATHE Craftsman 60 degree Center & Work Arbor ,Screw center N I B
These look to be new unused but I'm not positive super clean All 3 are Morse Taper#2
|
|
|
EMCO DB-5 WOOD TURNING LATHE- MADE IN AUSTRIA 240 VOLT
YOU ARE LOOKING AT AN EMCO DB-5 WOOD TURNING LATHE MADE IN AUSTRIA BY MAIER& CO. HALLEIN 4 SPEEDS 600. 1000, 1700, 2700 R.P.M 42" BETWEEN CENTRES. CENTRE 8" ABOVE BED. 240 VOLT. 50 HZ, 3.6 AMPS, O.55 KW, 1400 R.P.M MOTOR DELIVERY PRICE QUOTED TO MAINLAND UK ONLY. PLEASE ASK FOR OTHER AREAS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANKYOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS Any questions please ask 07926 048237
|
|
|
Shopsmith Mark V 8" Lathe Toolrest w/ Upgrades!!
Shopsmith Mark V 8" Lathe Toolrest w/ Upgraded levers! This will help you set up a bette r lathe pos ition without requiring an allen wrench. New s etups will cost you well over $80. Without the levers. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shop Smith 5-piece Lathe Chisel Set
Shopsmith Mark V 5-piece Lathe Chisel Set! All 5 included(1" Wide Gouge. 3/8" Gouge, 1" Skew, 1/2" Roundnose, and a 1/8"X1/2" Parting Tool) They are all in very good shape as shown. Were hardly ever used. These would cost you around $100 from the factory! Feel free to ask any questions.
|
|
|
Excellent ROCKWELL DELTA 12" Wood LATHE HEAD STOCK COVER #434-04-054-5001
This sale is for one NICE LIKE NEW ROCKWELL DELTA 12" LATHE HEAD STOCK COVER Part No. 434-04-054-5001 Fresh coat of paint like new the cover does have a couple of small holes drilled in sides and one has a pop rivet still attached. please see photographs A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items ... morecross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any pro
|
|
|
Shopsmith Mark V 3 3/4" Steel Lathe Faceplate!!
Shopsmith Mark V 3 3/4" Steel Lathe Faceplate! This item is in great used shape. Showing very little signs of use. These run almost $25 from t he factory. Please check out my other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Craftsman 101 Lathe Tailstock Part # M6-5X 618 6 inch
Craftsman Tail Stock good working order.smooth M6-5X Tailstock Craftsman 101 618 6 inch
|
|
|
Shopsmith Greenie Mark V 8" Lathe Toolrest, Free Shipping!
Shopsmith Greenie Mark V 8" Lathe Toolrest. Free Shipping! This will help you set up a bette r lathe pos ition. I will pay all Shipping Costs to the lower 48 S t ates! New s etups will cost you well over $80. The only difference with this one is the paint. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith lathe tool and end mounts
Shows virtually no signs of use. Priority Mail. California buyer pays 9% tax.
|
|
|
Shopsmith Mark V 10-piece Lathe Chisel Set!, Great Shape!
Shopsmith Mark V 10-piece Lathe Chisel Set. Great Shape! They are all in very good shap e a s shown. These 10-piece sets are not available from the factory anymore! Please check out my other auctions. I f you win 2 auctions or more. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
|
Shopsmith Mark V 2-position 8" Lathe Toolrest Upgrade!!!
Shopsmith Mark V 2-position 8" Lathe Toolrest Upgrade! This item is in very good shape as shown. The two positions will help you set up a bette r lathe pos ition to complete your tasks. Why not treat yourself to an upgrade? It does not come with the actual rest, only the upgraded tool rest arm. New s etups will cost you well over $100. Please check out my other auctions. I f you win 2 auctions or more I will combine shipping because it makes it easier on both the buyer and the seller. To avoid confusion in that case. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
|
|
 |