|
Freeborn Raised Panel Shaper Cutter
Bought this cutter with several others but will not be using this one. Cutter has been used but appears to be in pretty good condition. 3/4 inch Bore. Freeborn Stock# FT-13991B Posted with
|
|
|
Freeborn MC-50-045 6 Pc Cope & Pattern Carbide Tip Shaper Cutter 3/4" Bore
Here is a Freeborn Tool Company Carbide Tipped 6 Pc Shaper Cutter. The 4 Largest Cutters have a 2 7/8 Diameter and the 2 Smallest have 2 1/8" Diameter and have a 3/4" Bore. The 3 Cutter Blades on each have No Nicks or Scored Edges. They are Razor Sharp. This was Picked up at a Woodworkers Estate Sale along wit h another Set of Freeborn Cutters that I also Listed. LIST OF TERMS: All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. I do my best to describe items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. All sales are final. I will be more than happy to answer any questions to the best of my ability or send you more pictures ... moreof an item. I offer all items as is. In there found condition. I always leave cleaning and(repairs) if needed to the new owners. ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 3 DAYS FROM THE END OF THE LISTING. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED PAYPAL SHIPPING ADDRESS. NO DROP SHIPPING. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* INTERNATIONAL BIDDERS! YOU ARE LIABLE FOR ALL CUSTOMS TAXES AND PAPERWORK. BECAUSE THE UNITED STATES POST OFFICE DOES NOT OFFER COVERAGE FOR OVERSEAS 1st CLASS MAIL. SHIPPING ON LOST, DAMAGED OR STOLEN ITEMS SO IT WILL BE THE INTERNATIONAL BUYERS RESPONSIBILITY ON ANY AND ALL 1ST CLASS SHIPPING. INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges.
|
|
|
Freeborn PC-10-020
Runs with 3-1/4' diameter rub bearing Freeborn AP-90-052(not included) Slightly used. Maybe once or twice at the most. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e654a7808-0x107-
|
|
|
Freeborn door edge cutter
Freeborn MT-57-101 Tantung edge profile cutter
|
|
|
Freeborn Corner Round Shaper Cutter
up for auction is a cutter that i will call a roundover i think it is unused the number on the body is fc28378 it is for a 3/4 spindle and does not include any bushings it does have the plastic shipping box thanks for looking
|
|
|
Freeborn MC-50-050 6pc. Door Set
3/4" Bore. 3/8" tongue depth. 1/4" wide center groover. Freeborn also offers 5.5mm and 5.2mm undersized 1/4" center cutters for this set. Orange series carbide tipped. Only lightly used. Never resharpened. Full carbide remains. No chips or defects. Guaranteed in perfect condition or I pay the return shipping. Does the operations in picture.
|
|
|
Freeborn Concave Half Round Shaper Cutter
Freeborn PT-24-009 concave half round shaper cutter. 3 wings. Alloy tipped, 1 1/4" bore, 4.00" diameter, 1/4" kerf. Use on solid woods only, no man made products. This cutter has never been sharpened. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Exterior door set Shaper Cutter
This set was never used except for the 1/2" rabbit which I used for a very short run just on time. The set is in very good condition almost like new.
|
|
|
Freeborn Cope & Pattern Shaper Cutter Set MC- 50- 020 6 piece set
Freeborn Cope& Pattern MC 50-020. 6pc set 3/4" Bore Cutter are in excellent new or like new condition. They show no to little use.
|
|
|
Freeborn Double Sided Cope And Pattern Shaper Cutter Set
Freeborn PC-11-070 double sided cope and pattern shaper cutter set. 3 wings. Carbide tipped, 1 1/4" bore, 1/4" x 5/8" tongue and groove option only. Use on solid woods as well as man made products. This set has some small nicks and scratches from moving, but spins up just fine with no issues. The set has never been used and is in as new condition. 6 pc. set with the 1/4" x 5/8" option. The 1/2" option can be purchased from Freeborn Tool off of the shelf. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn SHAPER CUTTER 1-1/4" Bore - 1/2" Groover For Cope And Stick.
11/4" bore groover. Can be used with grizzly passage door sets. 95% carbide. As always for optimal results a fresh sharpening is needed. But it is perfectly usable as is. Will combine shipping, so wait for invoice if purchasing multiple items. Posted with
|
|
|
Freeborn Proline Cope and Pattern Shaper Cutter Set
Here is a Freeborn Proline Cope and pattern shaper cutter set. Freeborn part numbers PC-10-010. Th is is the part number of the new style anti-kick back. But the size and p rofile is the same. The cutting edges are razor sharp. But the oran ge paint is worn in some areas(see pictures) Go to Freeborns website to see more of what can be done with this set. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ff6b9701b-0x101-
|
|
|
Freeborn Tantung Proline Shaper Cutter
Here are a pair of Freeborn Tantung Proline shaper cutters. They are three wing. Straight top groovers sizes 1/4" and 3/8" Freeborn part numbers 22-004(1/4" and 22-006(3/8" 4" overall d iameter. These are the part numbers of the new style anti-kick back. But the size is the same. The cutting edges are razor sharp and the yellow paint is near perfect, as these cutters weren't used much at all.
|
|
|
Freeborn Tool Cope and Pattern Shaper Cutter Set SC-50-030
up for auction is a freeborn tool cope and pattern shaper cutter set. sc-50-030 is the model number. i bought these new to do my kitchen and had to use a friends shaper because i dont have one. they havent been used since then and i have no use for them now. thanks foe looking.
|
|
|
Freeborn Tool Raised Panel Shaper Cutter SC-54-001
up for auction. Freeborn tool raised panel shaper cutter, sc-54-001, 3/4" bore. used only one time for my small kitchen. had to use a friends shaper because i dont have one, and havent used them since. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ffecebbbf-0x103-
|
|
|
FREEBORN TOOL TANTUNG SHAPER CUTTER BACK CUTTER 1 1/4" BORE PT-16-001 USED ONCE
SELLING THIS AND 2 OTHER FREEBORN CUTTERS FOR AN ESTATE. THIS ONE ACCORDING TO HIS WIFE WAS USED ONCE. NO PAINT IS EVEN WORN OFF. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
used Freeborn shaper cutter 3/4 " shaft
This Freeborn shaper cutter blade is used but appears to be in good shape. It comes in the cylindrical factory plastic clam shell protective package
|
|
|
Freeborn Tool Tool Edge Shaper cutter PC-17-006 1.25" bore
Freeborn Tool Cabinet door edge detail shaper cutter. 1.25" bore.
|
|
|
Freeborn PC-10-020 6pc Cope & Pattern Shaper cutter set 1.25" bore
Used Freeborn Tool Cope& Pattern Set for cabinetry. See pic for different patterns possible with this set. 1.25" bore.
|
|
|
Freeborn Cope And Pattern Shaper Cutter Set 50-015
Made in the USA Freeborn Triple bead cope and pattern shaper cutter set for cabinet doors 3/4" to 1 1/8" thick. Can be stacked to make the triple bead rail and stile profile or eliminate the profiled cutters to make standard shaker tongue and groove doors. Extremely versatile and sharp! Was purchased new to run that special profile on one large kitchen job. Well maintained in original packaging. With no nicks or carbide defects. 3/4" bore. Posted with
|
|
|
Freeborn Insert Raised Panel Shaper Cutter
Freeborn IC-14-002 insert raised panel shaper cutter. 3 wings. Carbide insert tipped, 1 1/4" bore, 6.00" diameter. Use on solid woods as well as man made products. Comes complete with one set of inserts as shown. This cutter was used to make wood samples for a customer. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Insert Groover Shaper Cutter
Freeborn IC-22-032-SP insert groover/rebating shaper cutter. 3 wings. Carbide insert tipped, 1 1/4" bore, 4.00" diameter, 60 mm kerf. Use on solid woods as well as man made products. Comes complete with one set of inserts as shown. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Tongue And Groove Option Shaper Cutter Set
Freeborn MC-50-601 shaper cutter set. 3 wings. Carbide tipped, 3/4" bore. Cuts a 5.5mm x 3/8" tongue and groove in M-50-XXX sets. Use on solid woods as well as man made products. This cutter has never been sharpened. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Lock Mitre Shaper Cutter Set
Freeborn PT-28-020 shaper cutter set. 3 wings. Alloy tipped, 1 1/4" bore. Use on solid woods only, no man made products. This cutter has never been sharpened. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-140eaee7d84-0xff-
|
|
|
Freeborn Bevel Cutter Shaper Cutter
Freeborn PC-17-028 bevel cutter shaper cutter. 3 wings. Carbide tipped, 1 1/4" bore, 1.00" kerf, 45 degree bevel cutter. Use on solid woods as well as man made products. This cutter has never been sharpened. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Tantung Tipped Shaper Cutter Cope & Pattern Set 3/4" Bore w/ 1/2" Tbush
Great Condition. Hardly used!
|
|
|
Freeborn 5 piece tongue & groove flooring set shaper cutter w/ nail slot
You are looking at a used Freeborn Tool Comp 5 piece tongue and groove flooring shaper cutter set with nail slot. There are 5 cutters to perform the cut for up to 1" material. Carbide tips. Counter clockwise with wood fed face down. 3 wings, 2-15/16" diameter, 3/4" bore. Freeborn Tool Comp Part Number# MC-59-030.
|
|
|
Freeborn Tool Co. Carbide Tipped Shaper / Cutter
Freeborn Tool Co. Carbide Tipped Shaper/ Cutter This auction is for a Freeborn Tool Co. Carbide Tipped Shaper/Cutter. Very good condition with very little wear. Has lots of life left. Includes plastic case. Click on a picture below for larger images. Customer Service Customer service is available Monday- Friday 8:30 AM- 4:30 PM Mountain Time Phone: 406) 839-2052 ext. 2 Fax(406) 252-1523 Payment Methods Accepted Our mailing address: FNP Outlet 1302 24th St. W#372 Billings. MT 59102 USA If you have any questions as to which payment methods we accept give us a call at: 406-839-2052 ext. 2 Policies Free Shipping Free shipping will be offered for Domestic shipping only. International shipments are NOT free and you will be required to pay for shipping. We deal in a wide variety of used merchandise. So. We are very frequently less knowledgeable ... moreabout the items that we are selling than our customers are. To help correctly identify the items in an auction, we will include a description of any markings on them that appear to be meaningful. We will describe any specific defects that we have found. We will provide the results of any research that we did into the item's value. The pictures in the auction are of the item(s) that will ship, so if the pictures provide more detail than we have in the auction title and description, then the pictures are correct. We will ship this item only within the United States and its territories. Any items marked"free shipping" being shipped to Alaska or Hawaii will accrue an extra surcharge depending on the weight and dimensions of the package. We will not ship this item to any other countries. We will use UPS ground for shipments to US states and to Puerto Rico. We will use the USPS for shipments to other territories and to FPO and APO boxes. The shipment will be insured against loss/damage for the amount of the winning bid. If a customs declaration is necessary(e.g. for territorial and FPO/APO boxes) The amount declared will be the amount of the winning bid. Please refrain fr
|
|
|
Freeborn/LRH Insert Cope And Pattern Shaper Cutter Set
Freeborn/LRH insert cope and pattern shaper cutter set. 3 wings. 1 1/4" bore, 4.00" diameter. Use on solid woods as well as man made products. This is a body set only and does not include any inserts as shown. This set was made as a duplicate to L.R.H. universal insert heads and works with the standard L.R.H. profiles. These tips are still available through Ballew Saw or Freeborn Tool. This set is from a cancelled custom order. Again. This sale is for the set of bodies only and does not include any tips. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
|
|
|
Freeborn Tool carbide tipped shaper cutter-corner rounding 3/4" bore, vintage
Carbide Tipped Shaper Cutter Corner Rounding 3/4" bore with 1/2" T-Bushings Freeborn Tool Co. Very good condition. Instructions included. Check out my other items! I am happy to combine shipping on any items. PLEASE NOTE: Most of the items I sell are from three generations of family heirlooms that we have no room for. While others belong to friends or relatives. I do my best to research the items and attempt to describe them accurately using photos and text. Also. I will clean off the surface dirt but I usually won't attempt to fix things that I'm not sure about fixing. Please keep in mind that most of what I sell is vintage and/or used and is not sold in‘new off the shelf’ condition. Though I do say when the items are brand new or in‘like new’ condition. International Buyers International buyers are responsible for custom ... morefees and may incur longer shipping times due to custom delays. Priority shipping is always an option; I cannot take responsibility for packages after they are in the possession of the USPS. Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-141784d84f0-0x102-
|
|
|
Freeborn Tool Tatung Tipped Straight Top Groover MT-62-004 Shaper Bit
Freeborn Tool Tatung Tipped Straight Top Groover MT-62-004 Shaper Bit Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge For Sale is a Freeborn Tool Tatung Tipped Straight Top Groover Shaper Bit. It is Part# MT-62-004 with a 3/4" Bore and 1/4" wide cutting width. Very minimal use with original box and papers- you won't be disappointed. Please ask any questions. Shipping to USA only will be $5.95. Shipping anywhere else is unavailable. I accept Paypal. Thanks for looking. SEE DESCRIPTION. SEE DESCRIPTION. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak.
|
|
|
Freeborn Shaper Cutter MC 50-015
This cutter has never been re sharpened and has minimal usage on the cutter. I believe this profile is referred to as a'waterfall' profile. The cutters are in really good shape and will be packaged as they were when shipped from Freeborn. We upgraded our shaper and now have 1 1/4" spindle so we are selling this cutter which has a 3/4" bore. Thanks for looking.
|
|
|
Freeborn Cope & Pattern Shaper Cutter Set MT- 50- 030-501-E 6 piece set
These versatile and easy to use 6 cutter sets are designed to perform the 3 functions shown. Our Standard sets cut 1/4 inch wide x 3/8 inch deep tongue and groove. Our common minor diameter requires no fence adjustment when changing from cope to pattern. Bore. 3/4 inch. Diameter 2-15/16" Material Carbide. Ships to the lower 48 states only. Thanks for for looking
|
|
|
Freeborn Raised Panel Shaper Cutter M-54-004
Up for sale is one Freeborn mini pro Raised Panel# 54 004 Standard bore 3/4" to 1\2' shaper cutter. Priced to sale.this item is used(little use) sharp blades! Thanks for looking.
|
|
|
LRH C-1619 (not Freeborn) shaper cutter molder qtr round convex 1/2" rad 1" bore
I am offering this LRH Enterprises woodworking tool for your consideration. It came out of an estate. I am not a skilled woodworker so I am giving the following details on this item to the best of my limited ability. If you have any questions do not hesitate to shoot me an email and I will answer you. This is a model# C-1619 and the unit also has the letter F and D hand stamped into the top. Diameter(D) 4" Radius(R) 1/2" Width(W) 7/8" Bore 1" carbide tipped Used but very sharp 100% American Made 1 lbs Useful in other woodworking applications. I will ship internationally but you will have to email me for actual postage charges. Thank you for looking.
|
|
|
Used Freeborn Groover Shaper Cutter Router Bit Carbide Tipped
Used Used Very Good Condition Freeborn Groover Shaper Cutter Head. 3-Blade Woodworking. Professional Router Bit 1-1/4" Bore. 3-1/8" Outer Diameter, 13mm Wide Carbide Tips Used Freeborn Groover Shaper Cutter Router Bit Carbide Tipped for sale here. Buyer will receive item as pictured Buy it Now from a trusted seller Thanks For Looking We combine shipping. Please visit our ebay store to make your purchase ABOUT US Our Company was established in 2005 with the goal of providing high quality and extremely affordable merchandise to you our customer. We sell in wholesale lots and individual retail items. We will buy. Sell or trade just about anything of value. With a 10,000 square foot facility to receive, market and ship products in a timely and professional manner, we hope you will find a very positive experience with us and return again ... moreand again for more great deals. PAYMENT We currently accept payment via PayPal. Payment should be made within 3 business days of the close of the auction. A confirmed address is required. RETURNS Unless stated that the product is being sold"As Is" in the listing. We accept returns within 14 days of reciept of your item. Any return shipping cost is the responsibility of the customer. Should you wish to return an item, please contact us, and we will issue you a Return Authorization number. INSURANCE Some items we sell that is of high value. Insurance is required and maybe included in the listing. Less expensive items, Insurance will be left up to the buyer as an option at checkout. PACKAGE TRACKING All packages are shipped via US Postal Service or UPS. When the label is printed. PayPal will send you an email with the delivery confirmation and/or tracking number. COMBINED SHIPPING We are happy to provide combined shipping on items purchased. The combined shipping cost is determined by the entire weight of the purchase. To ensure accuracy to this policy. Please wait for a combined invoice from us before completing checkout. note, the combined shipping has a 3 day time
|
|
|
Freeborn Cope Rail & stile Shaper Cutter Set PT-11-010
You are buying 1 set of 8 cutters. Model PT-11-010 Freeborn, In very good to new condition. That set sells for over $1100.00 at Freeborn, what you see is what you get, has 1-1/4" bore.And can be used on 1" or 3/4" shafts with bushings,not included) Shipping In Canada and USA $14.00 we do combine shipping if possible, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141e3d80f35-0xfd-
|
|
|
Freeborn Cope And Pattern Shaper Cutter Set PC-10-040 w/5.5 mm cutters
8 PC cutter set with 1 1/4" bore. This set has an extra set of 5.5 mm tongue and groove cutters so you can use.25 domestic plywood or 5.5 mm import plywood for door panels. These may have been sharpened once. There is some paint removed from one of the cutters(see photos) that looks like it was done when sharpening.
|
|
|
Freeborn Edge Profile Cutter Head
For sale is a Freeborn edge profile cutter head with an 1 1/4" spindle. It is in excellent shape. I purchased it for my cabinet shop and used it very little. Item is sold as is. Please ask questions. Paypal payment required within 3 days of winning auction. Item will ship with in 3 mailing days via USPS once payment is received. Sorry, no international shipping.
|
|
|
Freeborn, Delta, Grizzly Carbide Shaper Cutters + bushings woodworking LOOK!
YOU ARE BIDDING ON A USED LOT OF SHAPER CUTTERS. I GOT THESE AT A GARAGE SALE AND KNOW NOTHING ABOUT THEM! THE BOXES READ AS FOLLOWS: DELTA CAT#45 921 COMPLETE CABINET SET. DELTA CAT# 45-941 CONCAVE STILE, ROCKWELL INT. CAT# 43-901 DOOR LIP, ROCKWELL INT CAT# 43-947 RAIL FOR CONVEX STYLE, ROCKWELL INT CAT# 43-915 COVE, BEAD, R.H. COPE, GRIZZLY MODEL G1562. ALL OF THESES ARE FOR 3/4" HOLE WITH 1/2" BUSHING. COMES WITH EVERYTHING YOU SEE IN PICS. ALL ITEMS ARE AS THEY APPEAR IN PICTURES!~!~ BUYER IS TO PAY $12.00 MAIL BASED ON BUYER LOCATION. PLEASE EMAIL ME ANY QUESTIONS YOU MAY HAVE AND I WILL DO MY BEST TO ANSWER THEM. AS SOON AS YOU RECEIVE YOUR ITEM AND ARE SATISFIED PLEASE LEAVE POSITIVE FEEDBACK AND I WILL DO THE SAME. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE PLEASE CONTACT ME ASAP SO WE CAN COME TO A SOLUTION. ... moreNO RESERVE! GOOD LUCK
|
|
|
freeborn custom panel cutter
This is a custom cutter very close to PT 15-005. We painted it so we could know the difference from our 15-005. It has an 1 1/4 bore.
|
|
|
FREEBORN Shaper Cutter Proline PC-25-024
More info on this link: Copy and paste catalog.eoasaw.com/item/freeborn-corner-rounding-shaper-cutters-1/freeborn-corner-rounding-shaper-cutters-pro-line/pc-25-024-1 I will be adding more Shaper cutters List Price 441.00 Like new only ran about 100 feet of fir and select cypress. Has never been resharpen. Nice and sharp PC-25-024 3 wing 5 1/2 diameter(unless specified)1-1/4" bore Specifications Manufacturer Freeborn Style Pro-Line Wing3 Diameter5-1/2 in Bore1-1/4 in Radius1-1/2 in Material Carbide Tip Color Orange Weight3 lb
|
|
|
Freeborn Set Pro Line Shaper cutter For V paneling
Freeborn pro line shaper set for male and female v-paneling It's in great shape 1.25" bore with bushing to 3/4" bore Model#P-19-010 still in original box used little
|
|
|
Freeborn 1/2 COVE Shaper Cutter
THIS IS A USED FREEBORN TOOL COMPANY 1/2 COVE SHAPER CUTTER. 1 1/4 BORE. 3 WING, TANTUNG TIPS ARE 3/16 THICK. NO NICKS OR CHIPS, NEVER SHARPENED. THANKS FOR LOOKING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1445009a6ac-0x114-
|
|
|
Freeborn Straight Shaper Cutter 1-1/4" BORE
CHECK OUT ALL THE OTHERS IN MY EBAY STORE SHIPPING POLICY: I SHIP WITHIN 24 HOURS OF PAID PURCHASE EXCLUDING WEEKENDS AND HOLIDAYS PAY PAL ONLY USA SALES ONLY RETURNS ARE ACCEPTED WITH A 10% RESTOCKING FEE BUYERS PAYS RETURN SHIPPING 14 DAY RETURNS ONLY AND ITEM MUST BE RETURNED IN THE SAME CONDITION IT WAS RECEIVED WE CLAIM NO RESPONSIBILITY FOR LOST OR DAMAGED ITEMS DUE TO THE USPS ALL ORDERS CAN BE TRACKED BY THE TRACKING#LISTED FROM YOUR PURCHASE WE ONLY SHIP THROUGH EBAY FOR BETTER TRACKING OF THE PACKAGES PLEASE CONTACT US BEFORE LEAVING FEEDBACK WE STRIVE TO RESOLVE ANY ISSUES YOU MIGHT HAVE IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME THRU EBAY I RESPOND WITHIN 24 HOURS
|
|
|
FREEBORN Cope & Pattern SHAPER CUTTER SET MC-67-010 4 Pc. Window Sash USA
Freeborn Shaper Cutter Set 4 Pc. Window Sash Set MC-67-010 Versatile and easy to use. This Set Does the Classic Window Sash Counterclockwise Rotation 3 Wing 2 15/16" Diameter 3/4" Bore Carbide Tipped We Used this Window Sash Set To Make 10 Windows On The Kolby Building In Aspen Colorado ~ Working With the Aspen Historical Society ~ We had to Make the New Windows to Match the Existing Windows A Carbide Tip Flaked on One of the Straight Cutters When We Starting the Millwork ~ Didn't Leave Any Nicks ~ Good Cutters Check Images as They are Part of the Description Thanks for Looking Good Luck
|
|
|
Freeborn set mc-68-001
Used once. Never sharpened cutter set mc-68-001
|
|
|
freeborn cutter head MC-50-010
used. But never sharpened cabinet door set mc-50-010.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144761a6c6c-0x105-
|
|
|
LOT OF 2 SHAPER CUTTERS - CABINET DOOR EDGE LIP 3/4" BORE FREEBORN? & LRH ENT
Description YOU ARE BIDDING ON A LOT OF 2 SHAPER CUTTERS- CABINET DOOR EDGE LIP 3/4" BORE FREEBORN? LRH ENTERPRISES. THEY ARE USED BUT ARE STILL SHARP AND HAVE A LOT OF USE LEFT IN THEM. BASED ON MY LIMITED RESEARCH ON THE WEB. I BELIEVE THE ORANGE ONE IS A FREEBORN CUTTER AND THE OTHER ONE HAS"L.R.H. ENT" STAMPED IN IT WITH THE NUMBER"1616. PLEASE DO YOUR OWN REVIEW TO CONFIRM THIS INFORMATION AND ASK ANY QUESTIONS. WE COMBINE SHIPPING WHENEVER POSSIBLE. Most of our items listed come from local sales. We try to disclose all we know about the item but since we are not the original owner or may not know what the items use is. We may miss some information about it. Please email us if you have any questions and we will do our best to answer your questions. We ONLY SHIP TO ADDRESSES IN THE UNITED STATES. We DO NOT offer local ... morepick up or personal delivery.
|
|
|
FREEBORN Cope & Stick SHAPER CUTTER SET JK11K 6 Pc. CABINET DOOR Woodworking USA
Freeborn Shaper Cutter Set 6 Pc. Cope Stick Set Cabinet Doors JK11K Versatile and easy to use. This Set Does the Classic Quarter Round Detail Counterclockwise Rotation 3 Wing 2 15/16" Diameter 3/4" Bore Carbide Tipped Great Cutters ~ Nice Tight Fit No Nicks ~ Sharp Ready to Go Check Images as They are Part of the Description Thanks for Looking Good Luck
|
|
|
COPE & PATTERN FREEBORN TOOL SHAPER CARBIDE CUTTER SET MC-50-550 6 Pc. Flat USA
Freeborn MC-68-020 Lock Mitre Single Tongue& Groove Lock Mitre Mini-Pro Carbide Tipped We Used This Set for Custom Beam Wraps Up in Aspen ~ Clicked them Together Hand Planed the Edges ~ Couldn't Tell the Difference the Wraps& Solid Beams Versatile and easy to use. Consists of 3 Cutters to Perform Single Tongue& Groove Lock Mitre Counterclockwise rotation with wood fed face down. Mini-Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. The time-tested. Orange-colored Freeborn cutter offers a geometrically Precise design that provides long life and Unmatched results in a variety of applications. Very Good Used Condition Good Cutters ~ The Groover has Small ... moreNick Does Not Leave a Trailer! Sharp& Ready to Go! Check Images as They are Part of the Description Check Out Our Other Tools! Thanks for Looking Good Luck
|
|
|
FREEBORN TOOL SHAPER CARBIDE CUTTER SET MC-59-020 6 Pc. Paneling Flooring USA
Freeborn MC-59-020 Flooring Set Mini-Pro Carbide Tipped We Used This Set for Custom Paneling Cuts 5 Different Patterns We Also Would Used a Bead Cutter On the Straight T&G- For the Beaded Paneling Versatile and easy to use. Consists of 6 cutters to perform single V Expanded single V Straight tongue& groove Radius V& Expanded Radius V Cut provides a loose fit for Wood expansion& Ease of Installation Mini-Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Counterclockwise rotation with wood fed face down Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. The time-tested. Orange-colored Freeborn cutter offers a geometrically Precise design that provides long life and Unmatched results in a variety of applications. ... moreExcellent Used Condition Good Cutters ~ No Nicks No Flakes Sharp& Ready to Go! Check Images as They are Part of the Description Check Out Our Other Tools! Thanks for Looking Good Luck
|
|
|
2 FREEBORN? SHAPER CUTTERS - COMBO SET 1" BORE ROUND COVE COMBO? FT 3508
Description YOU ARE BIDDING ON 2 FREEBORN? SHAPER CUTTERS THAT ARE A MATCHING REVERSE PATTERN OF EACH OTHER AND ARE A 1" BORE. BOTH HAVE"FT 3508" STAMPED IN THEM. THEY ARE USED BUT ARE STILL SHARP AND HAVE A LOT OF USE LEFT IN THEM. WE COMBINED SHIPPING WHENEVER POSSIBLE. Most of our items listed come from local sales. We try to disclose all we know about the item but since we are not the original owner or may not know what the items use is. We may miss some information about it. Please email us if you have any questions and we will do our best to answer your questions. We ONLY SHIP TO ADDRESSES IN THE UNITED STATES. We DO NOT offer local pick up or personal delivery.
|
|
|
Freeborn Panel Cutter, Grizzly Panel Cutter, And Rail Stile Sets
This listing includes: 24 tooth diablo table saw blade 5/8 arbor Grizzly raised panel shaper cutter 3/4 spindle C2068 Freeborn raised panel cutter PC-15-006 2 15/16" shaper bearing(NEW) 3/4 shaper panel back cutter(NEW) 3 sets of 1/4 inch corner round 6 piece Rail and stile shaper cutters 3/4 spindle The freeborn panel cutter was only used for one small job. Grizzly panel also I'm excellent condition. Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144dd6dea0a-0x108-
|
|
|
FREEBORN Mini-Pro SHAPER CUTTER RAISED PANEL Stock #M-54-005
$8.00 shipping cost in USA only. You are bidding on a FREEBORN Mini-Pro SHAPER CUTTER RAISED PANEL Stock#M-54-005. Used but no repairs or chips in blade. Cutting blade itself measures about 1 3/8" Can be picked up. Do not bid if you do not know what you are buying. Picture tells the story. Any questions please email WELL in advance. Will combine ship if they fit in same flat rate box. $8.00 shipping cost in USA only. Email for payment options.
|
|
|
CUSTOM MADE BY FREEBORN TOOL WINDOW SASH COPE AND STICK CUTTER SET
CUSTOM MADE TO MATCH AN EXISTING SASH PROFILE IN AN HISTORIC HOME RENOVATION.PROFILE CUTTERS HEIGHT IS 1 3/8"STRAIGHT CUTTERS ARE 7/8" TALL.LARGE PROFILE AND STRAIGHT CUTTER ARE 4" IN DIA.SMALLER PROFILE IS 3" IN DIAMETER AND SMALL STRAIGHT CUTTER IS 2 3/4" IN DIAMETER.SHARPENED RECENTLY BY FREEBORN.ONLY MADE A COUPLE MORE SASHES AFTER SHARPENING WAS DONE.GREAT SET.735.00 NEW
|
|
|
FREEBORN Carbide tipped SHAPER CUTTER RAISED PANEL Stock #M-54-002 damaged
$3.00 shipping cost in USA only. You are bidding on a FREEBORN Carbide tipped SHAPER CUTTER RAISED PANEL Stock#M-54-002 damaged. Includes the bushings shown. Cutting blade itself measures about 1 3/8" One blade is chipped. Other two are fine, sold as-is. The information on the box panel is what I believe is pretaining to this tool. I will ship in a USPS First Class padded envelope to save on shipping cost to you. It will not include the original box unless you want to pay the extra shipping costs to include it. Can be picked up. Do not bid if you do not know what you are buying. Picture tells the story. Any questions please email WELL in advance. Will combine ship if they fit in same flat rate box. $3.00 shipping cost in USA only. Email for payment options.
|
|
|
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Mini-Pro Line Carbide Tipped Shaper Cutter 3/4" Bore 2-15/16" Diameter 1/4" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers ... moreto opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"electronic proof of signature delivery" acceptable to
|
|
|
Freeborn Cope & Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove
Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Originally an 8pc MC-51-010 set. Now missing the 1/4" center cutters. 3/4" Bore Carbide Tipped Double-Sided Cope& Pattern Cutter Set Built to cut 1-3/4" passage doors. Cuts 1/2" x 5/8" deep tongue and groove. Use 1-11/16" rub bearings(not included) to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent ... moreservices performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be pr
|
|
|
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Two(2) Mini-Pro Line Carbide Tipped Shaper Cutters 3/4" Bore 1-11/16" Diameter 1/4" and 1/2" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible ... morefor delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"
|
|
|
Freeborn Tools Raised Panel Cutters
Freeborn Tools Raised Panel Cutters used once. There are 2 different profiles. See pics to look at cutters.
|
|
|
Freeborn Datail Cutter Shaper Cutter
Freeborn custom detail cutter shaper cutter. 3 wings. 3/4" bore, Carbide tipped. Carbide tipped for solid woods as well as man made products. This cutter was used to cut wood samples for a customer and has never been sharpened. The profile is a step/bevel/step type profile with a 1/4" depth of cut, and a 1.00 kerf. This cutter is in excellent condition and sold"As Is" with no returns. We accept Pay Pal only. Your item will be shipped within 3 days of your funds clearing our account. Thank you for looking. Shipping within the U.S. only.
|
|
|
Freeborn T-Alloy Glue Joint Shaper Cutter for 1-1/4" Spindle
For sale is a used. Just professionally sharpened Freeborn Glue Joint Shaper Cutter. The cutting surface is a T-Alloy, which is similar to carbide. This is for a shaper with a 1-1/4" spindle. Can be used for wood up to 1-7/8" thick. They sell for about $300 when new.
|
|
|
Freeborn Pro-Line Tantung Shaper Cutters
These cutters are top-of-the-line. Production quality cutters. Tantung blades are stronger and more durable that carbide, and hold an edge longer. All three cutters have barely been used(for making two redwood raised panel doors) are extremely sharp, are in like-new condition, and in their original packaging. 6-cutter Cope& Pattern. Pro-Line(Yellow) PT-040; 1 ¼-inch bore; 7/8- to 1 ¼-inch material(Online a dvertised price range: $428.00- $562.00) Raised Panel Cutter. Pro-Line(Yellow)PT– 14-002; 1 ¼-inch bore; ¾-inch material; Online advertised price range: $185.99- $316.00) Reversible Glue Joint. Pro-Line(Yellow) PT-18-001; 1 ¼-inch bore; Online advertised price range: $258.30- $387.00)
|
|
|
Freeborn T-Alloy Reversible Glue Joint Shaper Cutter for 1-1/4" Spindle
For sale is a used. Professionally sharpened Freeborn Glue Joint Shaper Cutter. The cutting surface is a T-Alloy, which is similar to carbide. It was returned to the manufacturer for sharpening in June, 2014, and hasn't been used since. This is for a shaper with a 1-1/4" spindle. Can be used for wood up to 1-7/8" thick. They sell for about $300 when new.
|
|
|
Freeborn CARBIDE Cope & Pattern Shaper Cutter Set MC 50 040 FREE PRIORITY S/H
CARBIDE Freeborn Tool Very good condition. They have been used. But Appears to have very limited use. Still sharp. Items have been cleaned and inspected. 3/4" Bore, 3 Wing Cutter, 2-15/16" Overall Diameter, Runs with 2-3/16" Diameter Rub Bearing, 6 Piece Cutter set, Cuts 1/4" Thick x 3/8" Deep Tongue, Requires no fence adjustment when changing from cope to pattern cuts, Counterclockwise rotation with wood fed face down,
|
|
|
Freeborn PC-22-004 ¼" Groover shaper cutter
1 ¼" bore. straight ¼" groover.runs true but needs sharpening. Otherwise good cutter head 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14776370a3d-0x118-
|
|
|
Freeborn Raised Panel Back Cutter - PT-16-001 - 1-1/4" Bore - Shaper Cutter
Freeborn PT-16-001 shaper cutter with rounded profile for cutting backs of door panels. Use a back cutter when you want the door panel flush with the door frame. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 4.75" Bore = 1.25" Height =.625" for 3/4" material Pattern Length =.375" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1478ec02f13-0x10e-
|
|
|
Freeborn Door Edge Shaper Cutter - PT-17-112 - 1-1/4" Bore - 32mm Hinge System
Freeborn PT-17-112 shaper cutter for profiling door edges compatible with 32mm hinge systems. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 4.25" Bore = 1.25" Height =.625" for 3/4" to 7/8" material Pattern Length =.7" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn Raised Panel Shaper Cutter - PT-15-006 - 1-1/4" Bore
Freeborn PT-15-006 shaper cutter with ogee/bead raised panel pattern. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 6" Bore = 1.25" Height = For 5/8" material or 3/4" material when using a back cutter Pattern Length = 1-3/8" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn Raised Panel Shaper Cutter - PT-15-007 - 1-1/4" Bore
Freeborn PT-15-007 shaper cutter with ogee/double bead raised panel pattern. 3 carbide knives on a steel body. Great condition- super smooth cutting. Dimensions are as follows: Diameter = 6" Bore = 1.25" Height = For 5/8" material or 3/4" material when using a back cutter Pattern Length = 1-3/8" Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn IC-10-020E Cope & Pattern Insert Cabinet Door Shaper Cutters 1-1/4 Bore
Freeborn IC-10-020-E cabinet door shaper cutters with ogee cope and pattern shape. These cutters both have the eased interior edges which work great on hard woods. 3 insert carbide knives on a steel body. Very light use- very nice condition. Dimensions are as follows: Diameter = 4.5" Bore = 1.25" Height = For 3/4" 7/8" material Pattern Length = 1/2" tongue/groove Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees. a;06d2.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1478ec02e2a-0x113-
|
|
|
Freeborn PT-10-500 Cope & Pattern Insert Cabinet Door Shaper Cutters 1-1/4" Bore
Freeborn PT-10-500 cabinet door shaper cutters with Shaker/ Flat Panel cope and pattern shape. 3 insert carbide knives on a steel body. This auction includes two different sets of tongue and groove cutters which changes the length and width of the tongue/groove for solid wood(1/4" or plywood(5.5mm) panels. Very light use- very nice condition. Dimensions are as follows: Diameter = 4" Bore = 1.25" Height = For 3/4" 7/8" material Pattern Length = Set 1) 1/4" x 1/2" tongue/groove Set 2) 5.5mm x 3/8" tongue/groove Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment ... moreTerms All payments must be received within 24 hours via PayPal. Shipping Terms Shipping costs stated in the auction include all shipping and handling fees. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1478ec02f12-0x10e-
|
|
|
Freeborn cutter shaper bits
Freeborn cutter shaper bits.assortment in great shape 1.25 bore. I will ship at actual costs to you. Thanks Steve. 262-573-8883.
|
|
|
FREEBORN RAISED PANEL SHAPER CUTTER MC-55-005 3/4" BORE W/1/2" T-BUSHING
FREEBORN TOOL CO. SPOKANE, WASHINGTON. RAISED PANEL SHAPER CUTTER IN LIKE NEW CONDITION. NO CHIPS OR DAMAGE ANYWHERE. 4" DIAMETER. 3/4" BORE WITH 1/2" T-BUSHINGS. GOOD QUALITY CUTTER! ANY QUESTIONS, PLEASE ASK. GOOD LUCK BIDDING!
|
|
|
Freeborn Shaper Arbor Shim Set AP 95-020 for 1-1/4" Arbors
Freeborn Shaper Arbor Spacer Set for 1-1/4" Set of color-coded plastic shims for various spacing needs. Includes the following colors and thickness: Green.003" Blue.005" Matte.0075" Yellow.020" Brown.010" Black.0125" Pink.015" Coral.030" Excellent condition. Check out my other auctions for more great tooling. Bidding Terms Zero feedback bidders must contact me before bidding. I reserve the right to cancel any bidders with less than five bids. You must have a PayPal account with confirmed address. Shipping only to confirmed Paypal addresses. Payment Terms All payments must be received within 24 hours via PayPal. Shipping costs stated in the auction include all shipping and handling fees.
|
|
|
Freeborn PT-25-016 1" Radius Shaper Cutter
For sale is a Freeborn PT-25-016 1" radius shaper cutter. The bore is 1 1/4" And it is considered a commercial cutter. It was used for a single project and was retired for the last 25 years. The use involved less than 100' of 2" bullnose. There are no nicks and the cutter has never been re-sharpened. It comes in the box in which it has been stored.
|
|
|
Freeborn PC-17-101 Shaper Cutter
Freeborn PC-17-101 Door Edge Detail. Carbide 1-1/4” Bore. 32mm. Use but still in great shape. Combine shipping with my other items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-149c4a8a462-0x10a-
|
|
|
Freeborn PC-57-010 Shaper Cutter
Freeborn PC-57-010 Shaper Cutter. Door Edge Detail. Carbide. ¾” Bore. Use but still in great shape. Combine shipping with my other items. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-149c4a8a47f-0x114-
|
|
|
Freeborn 3/4 Bore 1/2 " round over cutter #MC-65-006
Your bidding on a used Freeborn 1/2 inch round over cutter. This was in storage from a previous shop, this excellent used condition w/ 1/2 bushing included, note, bore& bushing have rust,but twist freely) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-149e0aafb9f-0x103-
|
|
|
Three wing Freeborn Pro Line raised panel shaper cutter. pc 14-003
This Freeborn raised panel cutter came with a shaper I purchased and I have no use for it. The cutter is a proline cutter with a 1 1/4 inch bore and 6 inch diameter. The profile is Freeborn's 14-003. This cutter is not meant for smaller shapers. The carbide is 1/8 inch thick and does not appear to be sharpened after market. There are small chips in the carbide that will come out when resharpened but you could easily run it as is. I have several other shaper cutters listed and I will combine shipping on these cutters(one package to a single address) as follows: $10 for the first item and $3 for each additional item. Items will ship after payment is received. Paypal only! Being sold as is/no returns. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14a45cbaffa-0x10f-
|
|
|
FREEBORN MT-51-040, 8 PC. STACK & COPE DOUBLE SIDED SHAPER CUTTERS 3/4" BORE
LISTED AS SELLER REFURBISHED. FOR THE SIMPLE REASON: CUTTERS HAVE PRODUCED A GRAND TOTAL OF 4 INTERIOR DOORS, SHARPENED& 2 EXTERIOR DOORS, JAMBS, USED FOR SHOWROOM SAMPLES. THIS IS WHAT THESE CUTTERS PRODUCE. INTERIOR 1 3/8" INTERIOR DOORS, AND 1 3/4" EXTERIOR DOORS. THE 1/4" STRAIGHT SLOT DADO CUTTER. HAS BEEN USED TO INCREASE THE WIDTH OF THE DADO ON KITCHEN CABINET DOOR STYLES AND RAILS. THE PANEL INSERT WAS TRUE 5/16" NANTUCKET BEAD BOARD. I FELT IT WAS WISE TO LET THE THE OWNER HAVE THIS 1 CUTTER SHARPENED, WHERE THEY WOULD BE SENDING THE OTHER CUTTERS. FOR THE LAST 9 YEARS THEY HAVE SAT IN A CABINET IN MY SHOP. SHARPENING NEEDS TO BE DONE BY A TRUE PROFESSIONAL. WITH THE PROPER EQUIPMENT TO MAINTAIN THE EXACT PROFILES FOR YEARS TO COME. I HAVE OWNED THESE FOR OVER A 10 YEARS. I PURCHASED NEW FOR 895.00, IN 2002. ... moreSINCE THE MARKET HAS BECOME MORE COMPETITIVE. I HONESTLY CAN'T TELL YOU IF THE QUALITY HAS IMPROVED OR DIMINISHED. FREEBORN CONTINUES TO MAKE A FAR SUPERIOR PRODUCT THAN MOST, BUT HAS HAD TO CUT THEIR PROFITS AND SELL MORE ONLINE. YOU CAN GO ONTO FREEBORN'S WEB SITE AND FIND THE EXACT SAME SET, WITH ALL THE EXACT SPEC'S. THE COST FOR NEW IS 700.00 PLUS SHIPPING. I HAVE TRIED TO SUPPLY YOU WITH PLENTY OF PHOTO'S TO FULLY INSPECT. I HAVE TRIED TO LINE UP THE COPED CUTTERS. TO SHOW THE PRECISION IN THESE CUTTERS. I'M SURE YOU WILL HAVE TO ENLARGE AND ZOOM IN TO JUDGE. I ESTIMATE THE WEIGHT OF ALL 8 CUTTERS TO BE ABOUT 4 LBS. THE BODIES ARE STEEL NOT A HEAVY ALUMINUM. THEY MOUNTED ON A 1/4" PIECE OF PLYWOOD IN THE ORIGINAL BOX TOP ONLY. HAVE ALSO INCLUDED A SHOWROOM INTERIOR DOOR MADE OF BUTTERNUT, WITH THIS SET OF CUTTERS. I HAVE TOLD MYSELF SOMEDAY I WILL USE THEM AGAIN. AND HAVE GOTTEN INTO WOOD TURNING. SO FOR THE AMOUNT OF USE I WILL GIVE THEM, DOESN'T MAKE SENSE TO KEEP. THIS WILL MAKE SOMEONE AN EXCELLENT SET OF CUTTERS, AT A VERY FAIR PRICE. THIS IS AUCTION PRICE FORMAT. FOR THE FIRST 7 DAYS. WILL THEN BE CHANGED TO A FIXED PRICE FORMAT AFTER.
|
|
|
Freeborn MC-50-045 Carbide Tipped Shaper Cutters 6pc Cope & Pattern Great Cond.
Freeborn Tool Company MC-50-045 Carbide Tipped Shaper Cutters 6 Pc Cope& Pattern 3/4" Bore 2 15/16" Diameter These versatile and easy to use 6 cutter sets are designed to perform the 3 functions shown. Our Standard sets cut 1/4 inch wide x 3/8 inch deep tongue and groove. Our common minor diameter requires no fence adjustment when changing from cope to pattern Winning bidder: Payment must be made with Paypal within 4 days of the close of the auction. If payment isn’t received within 4 days. A Non-Paying Bidder alert will automatically be filed. Please note that we will only ship the address that shows on the PayPal payment- please make sure the shipping address entered on the order matches the address on the PayPal payment. Your order WILL be placed on hold and will not ship until the shipping address matches the address on ... morethe PayPal Transaction Page. No International bidders. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14a73ad0d57-0xfe-
|
|
|
FREEBORN DOOR EDGE DETAIL SHAPER CUTTER MT-57-002 CARBIDE 3/4" BORE
LISTED AS SELLER REFURBISHED. IT HAS ACTUALLY BEEN USED ON ONLY A COUPLE DOORS. AND IS CLOSER TO NEW. IT COULD BE USED TO SHAVE WITH. I PURCHASED AROUND 2002. IT WAS USED ON A COUPLE DOORS, PLACED BACK IN THE BOX AND HAS SAT IN A CABINET SINCE. BOTTOM OF BOX IS STAMPED DATED MARCH 5 1997. I STILL HAVE PURCHASE SLIPS FROM 2002. I PURCHASED FROM MILT SCHMIDT CO. FOR 202.99. BOX IS LABELED TANTUNA TIPPED SHAPER CUTTER. DOOR EDGE DETAIL. 3/4" BORE. THE ITEM SPECIFICS DETAILS IS NOT ALLOWING ME TO LIST THE MODEL. AS A DOOR EDGE DETAIL. MY COST WAS SUBSTANTIALLY MORE THAN TODAY'S COST, OF WHICH CAN BE LOOKED UP, STRAIGHT FROM FREEBORN IS 146.46 PLUS SHIPPING. THE FIRST 100.00 WILL OWN THIS BARELY USED TOP QUALITY SHAPER CUTTER WITH FREE SHIPPING TO THE MAIN 48 STATES. PURCHASED FROM ELSEWHERE BUYER TO PAY ALL COST ABOVE 6.00. I WILL ACCEPT ... moreRETURNS WITHIN 5 DAYS OF RECEIVING AND PAY THE RETURN SHIPPING IF YOU BELIEVE I HAVE MISREPRESENTED THIS CUTTER IN ANY WAY. AFTER THIS THE BUYER TO BE RESPONSIBLE FOR ALL SHIPPING COST. INTERNATIONAL BUYERS PLEASE ADD 5.00 FOR HANDLING AND ALL COST OVER 6.00 US DOLLARS IS YOUR RESPONSIBILITY. NO INTERNATIONAL RETURNS, SORRY. NO SHIPPING TO ITALY. THANK YOU ALL FOR LOOKING. GOOD LUCK, DON'T WAIT IT COULD BE TOO LATE. IF YOU HAVE ANY PROBLEMS OR QUESTIONS AT ALL PLEASE CONTACT ME FIRST. PLEASE DO NOT THROW OUT ANY OF THE SHIPPING PRODUCTS OR PACKAGING. THANK YOU. YOUR SATISFACTION IS VERY IMPORTANT TO ME. FOR BUYER'S OUT THE MAIN 48 PLEASE WAIT FOR AN INVOICE.
|
|
|
Freeborn reversible glue joint shaper cutter. This is the mini pro size 58-001.
This Freeborn glue joint shaper cutter came with a shaper I purchased and I have no use for them. The carbide on this cutter is in really good shape and should have a lot of life left. Its the mini pro 58-001 profile with a 3 inch diameter and 3/4 inch bore. These sell new for $200! I will combine shipments if you would like to buy any of my other cutters that are listed(I have sold most of them. But have a few more to list) Items will ship after payment is received. USA SHIPPING ONLY! Paypal only! Being sold as is/no returns. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14ac8db3e4a-0x111-
|
|
|
Freeborn Tool Company Window Sash Set PC-27 010 (Carbide)
This is Freeborn Tool Company Set PC-27 010. Lightly used in one man shop. If you use these you know how much they cost. New about $600.00 Dollars) These are by far the best stacking cutter sets in the business! These are 1 1/4 inch bore. E-mail any questions. If you look on the Freeborn site you can see the profile a little better. Thanks.
|
|
|
Freeborn Tool Company Double Sided Cope and Pattern Set ( PT-11 040)
This is Freeborn Tool Company Set T-Alloy PT-11 040. Lightly used in one man shop. Used for Exterior and interior doors. If you use these you know how much they cost. New about $1200.00 Dollars) These are by far the best stacking cutter sets in the business! These have a 1 inch bore. E-mail any questions. If you look on the Freeborn site you can see the profile a little better. Thanks.
|
|
|
Freeborn Tool Company PC-10-145 Carbide Cope & Pattern FREE SHIPPING!!
You are bidding on a gently used Freeborn Tool Company PC-10-145 Carbide Cope& Pattern. This Freeborn Tool Company PC-10-145 Carbide Cope& Pattern is gently used and does show slight signs of wear from normal use. This auction will include the Freeborn Tool Company PC-10-145 Carbide Cope& Pattern as shown in the pictures. Anything not shown in the pictures will not be included in this listing. Trust my feedback. Bid with confidence, I always deliver what I say. Please refer to the manufacturers website for more information on this Freeborn Tool Company PC-10-145 Carbide Cope& Pattern. Shipping for this item in the United States is FREE! I will ship worldwide as long as you(anyone outside of the United States) are paying the entire shipping costs. Please view my store for other great items. Thank you for looking and have a ... moregreat day!
|
|
|
Freeborn Tool Carbide Shaper Cutters, Back Cutters & 45 Deg. Bevel Cutter
Freeborn carbide shaper cutter set. 3/4" 1.25" bore. Good used condition. See pics for details. Includes the cutters in the pics. Paypal please.
|
|
|
Freeborn Tool Co. Cope & Pattern Carbide Shaper Cutter Set 3/4" bore
Freeborn cope& pattern carbide shaper cutter set. 3/4" bore. Good used condition. See pics for details. Includes the cutters in the pics. Paypal please.
|
|