|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$5.00 Shipping Condition: New Location: North East, United States Delta Moulding Cutterhead Knives, various part numbers and profiles. Choose which profile you need.
Buy It Now
$3.90 Shipping Condition: New Location: Chatsworth, United States
Buy It Now
$8.00 Shipping Condition: New Location: Freeland, United States EACH INSERT IS MACHINED TO SET INTO THE TABLE OPENING, FLUSH WITH THE TABLE SURFACE.
Buy It Now
$7.00 Shipping Condition: New Location: Freeland, United States Rockwell.Delta,Milwaukee 6" Jointer Cutter Head Bearings. Set of 2. These are extended race bearings that are the same as the original New Departure ... morebrand bearings with the exception that they are sealed on the extended race side(dirty side) of the bearings. These are metal shielded on one side and rubber sealed on the other. The original bearings were metal shielded on both sides. Refer to last photo for dimensions referenced in the chart below. All dimensions are in millimeters. Left side Bearing: ID OD Width Radius d D B B1 B2 r 15 35 11 12.2 12.7 0.6 Right Side Bearing: ID OD Width Radius d D B B1 B2 r 17 40 12 13.7 14.88 0.6 These bearings are used on 6" jointer models 37-207 and 37-307. They are also used on early model(pre mid 60's) 37-220 6" jointers. Later model 37-220 models used non-extended race bearings that were the same size on both sides. Will also work on other brands and models of power tools and equipment that require this size bearing. Delta part number: Left Side- 920-08-020-5336. Right Side- 920-08-020-5337 Industry part number: Left Side- 87502. Right Side- 87503 Combined shipping discounts are provided when possible on multiple items. Feel free to contact us for a specific quote prior to bidding. Discounts will appear on a combined invoice after each purchase. Delivery Confirmation is included in the Domestic Shipping and Handling Charges. International buyers are responsible for all additional shipping costs such as duties. Taxes, and customs clearance fees.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States Jet no. 6284843. This is the oil seal in the gear box where the cutter head shaft goes into the gear box. It will fit the Jet 15" planers.
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
Free Shipping Condition: New Location: United States The easiest and most efficient way to reset your blades, fits most planer blades. elta 22-540 guage for the Delta 12" portable planers (22-540) type 1 ... more& 2, and the TP300. THIS GAGE WILL NOT WORK ON ANY FULL SIZE PLANERS, 15" PLANERS, 13" PLANERS, 16" PLANERS, OR 20" PLANERS.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Wisconsin Knife Works Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-1/4” Length20 CA, 16-90 Corr
Buy It Now
$8.23 Shipping Condition: Used Location: Seattle, United States Shaper cutter head, spindle moulder cutter block. Stamped M.B.1.
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 2 pocket corrugated molder cutterhead. 1-13/16" Bore. Steel construction.
Buy It Now
$10.00 Shipping Condition: New Location: Freeland, United States These are the "ULTIMATE" insert plates, available in several styles. For our inserts, we spared no expense. These inserts are manufactured from 1/2" thick ... more6061 billet aluminum plate. Each is heavy and solid, and will provide decades of service.
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States North American Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-3/8” Length20 CA, 16-90 Corr
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States Weinig Hydralok 1 13/16 Bore 6" Diameter 6” Length Moulder Cutter Head 6 Cutter. Great condition. Cost $1000 new. Includes all 6 gibs. Ready to go to ... morework. Make an offer.
Buy It Now
Free Shipping Condition: Used Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
$18.40 Shipping Condition: Used Location: Raymond, United States Weinig 40mm Bore 122mm Diameter 150mm Length Moulder Cutter Head. In excellent condition. Not a corrugated cutter head. Made to use William and Hussey ... morestyle knives. Like new!! Over $500 new!!
Buy It Now
$18.40 Shipping Condition: New Location: Rainier, United States New LRH Moulding Machine Cutter Head Profile Shaper Knives J-123870-2, 1" Bore. 2 originally available! Price per each. See all pics for details. Condition ... moreis new, old stock, still in the package.
Buy It Now
$13.60 Shipping Condition: Used Location: Twain Harte, United States Shopsmith Magna 129-12X Jointer Cutter Head 84-3453. Looks to be very lightly used with razor sharp cutting blades and is in excellent pre-owned original ... morecondition. Withbox and instructions.
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 4 pocket corrugated molder cutterhead. 1-1/2" Bore. Steel construction.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States Delta NOS no. 1349427. This is the oil seal in the gear box where the cutter head shaft goes into the gear box. It will fit the listed Delta 15" planers. ... moreUsed on the following planers: 22-675, 22-676, 22-680Y, 22-680, 22-681, 22-780X, 22-785X, 22-790X.
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 4 pocket corrugated molder cutterhead. 1-1/2" Bore. Steel construction.
Buy It Now
Free Shipping Condition: Used Location: Athens, United States
Buy It Now
Free Shipping Condition: New – Open box Location: San Ysidro, United States
Buy It Now
Free Shipping Condition: For parts or not working Location: North Bend, United States The cutter head is expertly crafted to ensure precision and accuracy in all your cutting projects.
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 2 pocket corrugated molder cutterhead. 1-1/4" Bore. Steel construction.
Buy It Now
Free Shipping Condition: New Location: Ellicott City, United States Co 4.0%, WC balance. Designed to fit W1705, W1718, W1741S, W1741SW, W1742S, W1742SW, W1744S, W1754S, W1754SW, W1755S. 305.000 P.S.I. Transverse rupture ... morestrength Fine grain 0.8 -
Buy It Now
Free Shipping Condition: New Location: Belleville, United States Delta # DPEC002593. This is an OEM cutterhead pulley for the Delta 22-555 planer. It includes a new locating key.
Buy It Now
Free Shipping Condition: New Location: Flourtown, United States All are made in USA and are sealed. 35-190 3 Bead 3/16". Not Happy?. What else can I say?. Pictures are of the actual item you will receive.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Copper and aluminum alloy plate: 1.8mm / 0.07in. Hardness of the tool bit reaches up to 58‑60, quality aluminum alloy material. Comfortable ... morehandle compact size, easy to operate and labor‑saving.
Buy It Now
Free Shipping Condition: New Location: Rego Park, United States This T-Slot Milling Cutter is designed for woodworking projects such as door making, stile, rail, and cabinet construction. With a 6T-120mm cut height ... moreand 10mm height, it is made of durable carbide material and manufactured in China. The cutter has a 35mm bore and is ideal for use in CNC, metalworking, and manufacturing industries. The unit quantity is one and it falls under the category of Business & Industrial, CNC, metalworking & manufacturing, and other woodworking supplies. It is an excellent tool for cutting precise slots and grooves in woodworking projects.
Buy It Now
Free Shipping Condition: New Location: China The easiest and most efficient way to reset your blades, fits most planer blades. Planer Blade only,other accessories demo in the picture is not included. ... more2 x Planer Blade Setting Jigs. Simplify setting and adjusting knives in a cutter head by stabilizing the blade.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB Notes:Please prepare a computer with USB Interface. DESCRIPTION: Pack List: 1X main unit (Frame) ... more1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual Description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a Corob 3 wing molding cutter. This is profile no. MC009 and it cuts the drop leaf table cove for the extension wings. You will need the MHK 25 ... morecutter head for this knife set to fit into.
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Used Leuco moulder cutter head with corrugated tooling#166-723. 8.000 RPM Mechvorssub 021-E 21 180x60x44.5 bore 35mm collar inside. Items used in great ... morecondition showing a little surface rust. Free shipping. Please check out my other auctions.
Buy It Now
Free Shipping Condition: New Location: United States Feature: 1. Copper and aluminum alloy plate: 1.8mm / 0.07in. Hardness of the tool bit reaches up to 58‑60, quality aluminum alloy material. Iron Plate: ... more1.2mm / 0.05in. Stainless steel plate: 0.8mm / 0.03in.
Buy It Now
$21.53 Shipping Condition: Used Location: Seattle, United States Weing 503 122 02 3/6 4-knife cutter head.
Buy It Now
Free Shipping Condition: New Location: Boise, United States The jig uses powerful magnets to hold planer or jointer knives in perfect position, freeing-up both hands while you tighten the gib nuts. Our Planer & ... moreJointer Knife jig also allows you to shift nicked knives while maintaining accuracy to within +/-. 002" across the length of your knife.
Buy It Now
Free Shipping Condition: New Location: Boise, United States The jig uses powerful magnets to hold planer or jointer knives in perfect position, freeing-up both hands while you tighten the gib nuts. Our Planer & ... moreJointer Knife jig also allows you to shift nicked knives while maintaining accuracy to within +/-. 002" across the length of your knife.
Buy It Now
$10.61 Shipping Condition: New Location: Wayland, United States
Buy It Now
$31.08 Shipping Condition: New other (see details) Location: LEICESTER, United Kingdom Stark 80x76x1.1/4" Spiral Planer Head. Suitable for Trend, Axminster, Rojek, Charnwood, Wadkin, Jet, Sedgwick, Kity Machines, Felder, Holzmann. 1.1/4" ... moreBore. - Hard aluminium alloy body with high resistance to tensile and yield stress.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States Helical cutters. The size is 14mm x 14mm x 2mm. There are 4 cutting edges and the corners are chamfered. The cutting angle is 30 degree. Easy to change ... morethe cutting edge or replace. paks only.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is the cutterhead pulley (1860005) for the Ryobi AP12 and AP1301 planers.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 1343849. This is the nut on the end of the cutterhead for the following Delta planers. 22-540, 22-560, 22-565, 22-580, TP300, TP305, ... moreTP400LS.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States My only 3/4” corrugated moulder head for shaper use. Comes with 30 profiles including crown, base, round over, flute, table edge, ogee, and others. Most ... moreof these cutters are smaller and have shallower profiles to be used with this 2 knife moulder head on a 3/4” spindle shaper. If you have any questions please ask. I do have approximately 24 more profiles we used with this head that will be listed later in a separate lot.
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
Free Shipping Condition: New Location: East Islip, United States Up for sale is a set of 3 cutting knives for Delta 35-131 glue joint moulding cutterhead. These knives are specifically designed to fit the Delta brand ... moreand are perfect for woodworking enthusiasts. They are made of high-quality materials, ensuring long-lasting performance and precision cuts. Whether you are a professional woodworker or someone who enjoys DIY projects, these Delta cutting knives are a great addition to your tool kit. They can handle even the toughest of materials and are easy to install and replace. Don't miss out on this opportunity to enhance your woodworking experience with these top-quality cutting knives.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of bearings for the cutter head on the 2012 and 2012NB 12" planers. Makita no. 211206-7 or 211209-1.
Buy It Now
Free Shipping Condition: Used Location: United States Wisconsin Knife Works Hydro-Lock molder cutter head.
Buy It Now
Free Shipping Condition: New Location: China 2 x Planer Blade Setting Jigs. The easiest and most efficient way to reset your blades, fits most planer blades. Simply place the gauge assembly over ... morethe knife and then adjust for the correct knife height.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is the bearing set for the Jet JPM-13 planer/molder cutter head.
Buy It Now
$6.00 Shipping Condition: New Location: Freeland, United States THE PINS ARE 2.75" LONG AND TAPERED TO SECURELY FIT INTO THE TABLE'S MATCHING HOLES.
Buy It Now
$11.69 Shipping Condition: New Location: Wayland, United States
Buy It Now
$15.45 Shipping Condition: Used Location: Negley, United States Used pulley
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Used Leuco moulder cutter head with corrugated tooling. Corrugated tooling#FS004434 3904/B Knives#FS004483 3904. 40mm x 170mm x 34.48mm bore no chips. ... moreItems used in great condition Free shipping. Please check out my other auctions.
Buy It Now
$30.50 Shipping Condition: Used Location: Raymond, United States Zuani 4” Moulder Head. 5” outside diameter. 12mm x 30mm Carbide Inserts. 40mm Bore Size. Condition is Used. In good condition. Carbide can possibly be ... moreflipped 1 more times, but will need new carbide cutters soon! Shipped with USPS Priority Mail.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Model A: 4 axis 6040. 2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The machine can connect with computer ... moreas other external device such as printer, scanner.
|
|
|
|
Weinig Cutter Head - 533.122.03.498 - 60mm wdX120mm DiaX40mm Bore - Lot 18
We inig Cutter Head 2 Knife Insert 533.122.03.498 60mm Width 120mm Diameter 40mm Bore C.H. LOT: 18 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GLADU shaper cutter insert molder head universal 3 WINGS retail 500.00
NAP GLADU 3 WINGS UNIVERSAL SHAPER CUTTER MULTI PROFILE HIGH QUALITY.THIS HEAD IS COMPLETE and ready to work no reserve. INTERNATIONAL PLEASE CONTACT US FOR SHIPPING COST PAYPAL ONLY
|
|
|
STARK Cutter Head 1-3/8" Bore 4-1/4" Dia.
STARK Cutter Head 1-3/8" Bore 4-1/4" Dia. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 ... moredays of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices at 815-758-6534 or me personally at(815) 299-7625 Monday through
|
|
|
Freud 2 Knife Performance System Shaper Cutter Head with 21 Knife Sets
Freud 2 knife cutter head system. Most bits unused. Faint markings from prior woodworking company name on case. Unknown system-cutter head marked Nr. 546 17. 21 knife sets in total. Posted with
|
|
|
Large Cutter Head with 19 1/2" mounting post
For Sale Large cutter head with 19 1/2" mounting guide post. Weighs appx 8 lbs. This is a very specific item so please take a close look at the pictures. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the ... moreclose of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can a
|
|
|
Rebate cutter head for spindle moulder with box of scribe cutters
Rebate cutter head for spindle moulder with box of scribe cutters Steel rebate cutter head for a spindle moulder 125mm dia x 50mm depth x 1 1/4" bore comes with a box of new tearout scribes Shipping to any UK destination is £8.75 I will combine shipping where possible Worldwide shipping avaiable please ask for costs Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
Old style Whitehill soindle moulder cutter head
Old style Whitehill soindle moulder cutter head A vintage Whitehill spindle moulder cutter head 5" diameter x 1" depth in good condition although not up to current health and safety standards so use is entirely at buyers risk Shipping to any UK mainland destination is £6.00 Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
Rosette Cutter Head Lathe Shaper Custom 8" Dia
Rosette Cutter Head Lathe Shaper Custom 8" Dia· This is a custom designed. One-of-a-kind cutterhead· Designed to cut large diameter rosettes and small radius profiled wooden parts· Mounted on a lathe headstock or other type of 1-1/2" threaded spindle· Uses standard corrugated knife stock· Head diameter = 8" Runs 2 knives. Max width 3-1/4" with option for running 2 more perimeter knives 1-1/2" width· Wt = 19 lbs· Includes one set of miscellaneous knives as a sample· For the custom shop or plant with the need for specialty parts· Original price exceeded $2500· Postage includes careful packing and fast shipping· Excellent condition
|
|
|
Dual Hook Moulder Head - 12 & 20 degree - 40mm bore - Cutter Head
Dual Hook Moulder Head- 12& 20 degree- 40mm bore- Cutter Head Corrugations for the knife stock do not fit our knife stock. This cutter head was made for a Chinese knife stock. It can be machined to fit Weinig corrugations.
|
|
|
Moulder Cutter Head ( Whisper Head )
Here is a Moulder Head for large moulders It is 6 1/2" in diameter and 4" high The bore size is 2 1/8" can use a sleeve to run on 1 13/16" bore) The cutter is carbide and has a 10% hook great for maple. Thanks for looking God Bless
|
|
|
Stark MP140/ 60 Universal shaper cutter molder multi profile insert head 1-1/4"
60mm Universal Insert Shaper Cutter Head in good condition Uses 60mm inserts and backers profiled to your application. The economy of switching inserts and the speed of indexable inserts, its a great tool! Oella Saw and Tool can provide carbide inserts and backers for 60mm and 40mm universal heads. We stock blanks. Lists new $900 For moulders and shapers 1-1/4" bore Balanced 4 z Major Diameter- 6-1/2" Cutting Edge Length- 60mm 2-3/8" Black Oxide Finish Made in USA by Stark#MP140/60 RPM Max 8000 14 lbs oellasawandtool.com Open Box Program. F.A.Q. 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program ... moreby holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open box, its best to email right away, even before your payment. flat rate box postage rates(insurance is strongly recommended and is extra) USA including Puerto Rico $10.35 up to 70lbs Canadian and Mexico $25.95 up to 20lbs* UK. Europe, Asia and Australia $41.95 up to 20lbs* International buyers please note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are
|
|
|
2 Knife Corrugated Shaper Cutter Head, 4"
4" High. 4" diameter, 1 1/4" bore 2 Knife cutterhead for corrugated back knives. Uses 1/4" 5'16" or 3/8" Knife stock. Maximum depth of cut is 1 1/2" with 3/8" Knives. Includes T Handled Wrench. Will combine shipping.
|
|
|
Shaper Moulding Head Cutter w/2 pairs of knives
This auction is for one used Shaper Moulding Head Cutter(Part# C2220) W/2 pairs of knives and instruction sheet. The knives could use a sharpening prior to use. This cutter is for a 3/4" spindle shaper(see photo for additional specs) Item is being sold"as is. Please contact me if you have any questions. In order to expedite shipping, please make payment via PayPal within 24 hours of the end of this auction. Thank you!
|
|
|
Grizzly C2183 Passage Door cutter head set 1.25" bore for shapers
Used Grizzly C2183 set for passage doors.
|
|
|
Nice Shaper Bit Cutter Woodworking Head 7058 3 1/2" Diameter Good Condition
Description Item: Nice Shaper Bit Cutter Condition: This great Shaper bit is in good condition. Shows signs of light use. But appears to be in good condition. Very solid, strong, and sharp. Overall a great attachment for your machine, will definitely get the job done. View pictures for greater detail. Size: 1 1/4" center 3 1/2" accross 3 1/4" tall Colors: N/A Comments: This item was previously owned. We are an estate liquidation company and are not experts on any one particular product. So please view photos closely for details and ask questions before purchasing. All items are sold"As-Is, Where-Is" with no warranty implied. Please refer to the terms of our return policy. Buyer pays return shipping. Thank you for looking! We stand behind each listing; our customer ratings are very important to us. We strive to do ... moreour best to ensure our customers are 100% satisfied. So please contact me if you have any questions. Concerns or problems prior to purchase or upon arrival of shipment. View My Other Items For Sale View My Feedback DZ-090913-RCK15 Payment Paypal is the only form of payment we accept. Winner is excepted to pay within 7 days or I will relist the item. Sometimes exceptions can be made but please contact me first. Buyers in California will be charged 8.00% sales tax. Shipping Items are shipped by Fedex Ground or by USPS depending on weight and size of item. We ship daily. Monday through Friday. If you pay for your item before 7:00am Pacific Time, it will ship the same day. Otherwise, it will ship the next business day. International Buyers- Please Note: We offer international shipping on everything we're able to. If an item can be shipped internationally(outside the US and Canada) there will be an advertised shipping rate included in the listing. If you do not see international shipping offered on the listing then the item is too large to ship to your country. Your customs form will include accurate information. Do not ask me to falsify the customs form. Import duties. Taxes, and
|
|
|
1 SHAPER CUTTER HEAD CARBIDE 2 WING 1" bore MOLDER WOOD WORKING ROUTER b 11X
1 SHAPER CUTTER HEAD CARBIDE 2 WING 1" bore MOLDER WOOD WORKING ROUTER b 11X Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 2 WING model with a 1" bore. Carbide is about 3/8" thick. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included ... morein the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction.
|
|
|
4 sets SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER h 11X
4 sets SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER h 11X Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here are 4 used sets of Carbide SHAPER CUTTERS. Carbide is from 1/8" to 3/8" thick. They should be sharpened and that will take out some of the edge imperfections. These have been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. ... moreFree Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by ap
|
|
|
Cutter Head Shaper Head C2 1 1/4' Spindle Tooling shapers moulder RYE 9000RPM
Welcome to our auction. For over 45 years Pruitt Machinery has proudly been an accomplished supplier of New and Used machinery and parts to the woodworking industry. UP FOR AUCTION One Rye Shaper Head. This is a C2 Shaper head with a 4" cutting diameter and a 2 1/4" cutting face. It will fit a 1 1/4" inch shaft. 9000RPM Max As Is SHIPPING AND TERMS We normally ship UPS. You may pick your item up at any time after payment at our place of business. Please let us know in the initial contact if you desire to pick your item up and save on the shipping. We are open 8:30am to 5 PM weekdays. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641 RETURNS All returns accepted! The buyer should contact us within 14 Days after receiving the item if you wish to return the item. We will provide you with a RA number to include in the ... morepackaging. The item must be returned in the same condition as it was shipped otherwise there may be charges. Your refund will be given as Money Back. The return shipping shall be paid by the buyer. The buyer has 14 days to return the item once given the RA number. After the item is received and inspected the refund will be released back to the buyer. PAYMENT We accept a wide variety of payments. The fastest ways of payment are. PayPal Credit Cards through PayPal Credit Cards through Pruitt Machinery(828) 328-2641 Slower methods of payment Postal money orders Cashiers Check Personal Check All postal money orders or checks will be checked for fraud and must clear before we will ship your item so please allow up to 2 weeks after we receive your payment for the item to ship. FEEDBACK We will provide feedback after the transaction and hope you will do the same. We strive for happy customers so please contact us if you have any problems before leaving negative feedback. We will provide you with a positive solution to your problem. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641
|
|
|
Stehle Weaver Inc NR 546/SO. 160 x 40 x 5/8 Molding Head Shaper Cutter
Up for sale today is an aircraft grade solid aluminum European style molding head made in Germany by Stehle for Weaver USA inc in very good condition as seen in pictures. It has a 5/8" bore and professionally machined approximately 1 15/16" x 5/8" deep counter bore on the front that allowed it to be used with an older Powermatic 66(could be machined/sleeved for other applications) Also included are 1 pair of knives(uses 40mm knives from CMT. Amana, Freud etc) and a t-wrench for the set screws. PLEASE NOTE: I can only guarantee this item is as described and YOU must verify its suitability for YOUR specific application! Local pickup is fine and please email with any questions.
|
|
|
Door backout cutter head
For sale is a Stark Door backout cutter head with insert knives as shown in picture. It has only been used twice so is in excellent condition. It has 1 1/4" spindle. Item is sold as is. So please ask questions. Paypal payment must be made within 3 days of winning auction. Once payment is received. Item will ship within 3 mailing days via USPS. Sorry, no international sales.
|
|
|
Freeborn Edge Profile Cutter Head
For sale is a Freeborn edge profile cutter head with an 1 1/4" spindle. It is in excellent shape. I purchased it for my cabinet shop and used it very little. Item is sold as is. Please ask questions. Paypal payment required within 3 days of winning auction. Item will ship with in 3 mailing days via USPS once payment is received. Sorry, no international shipping.
|
|
|
Door Panel Cutter Head
For sale is 2 door panel cutter heads made by Jesada/Stark. It has an 1 1/4" spindle with insert knives. There are 5 sets of knives that have 3 different profiles included with this cutter head. They are in great working condition. Please let me know if you have any questions. Item is sold as is with no returns. Paypal payment within 3 days of winning auction. Item will ship within 3 mailing days via USPS once payment is received. Sorry. No international shipping.
|
|
|
Stehle rebating insert cutter head 1 1/4 bore Shaper
Nice condition Higher end cutter head 125x50x1 1/4 bore Rebating cutter head 6 new inserts Tooling wrenches
|
|
|
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here are 3 used sets of Carbide SHAPER CUTTERS. The shaft holes are 1/2" and 1" They should be sharpened and that will take out some of the edge imperfections. These have been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for ... morebest view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Payp
|
|
|
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 3 WING model with a 1" bore. Carbide is about.125 thick where I can measure it. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which ... moreis included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close
|
|
|
FELDER Insert Cutter Head 100X40X30 Bore Shaper
THIS IS A FELDER STRAIGHT SHAPER CUTTER W/ INSERT TOOLING, 30 MIL BORE CHECK OUT ALL THE OTHERS IN MY EBAY STORE SHIPPING POLICY: I SHIP WITHIN 24 HOURS OF PAID PURCHASE EXCLUDING WEEKENDS AND HOLIDAYS PAY PAL ONLY USA SALES ONLY RETURNS ARE ACCEPTED WITH A 10% RESTOCKING FEE BUYERS PAYS RETURN SHIPPING 14 DAY RETURNS ONLY AND ITEM MUST BE RETURNED IN THE SAME CONDITION IT WAS RECEIVED WE CLAIM NO RESPONSIBILITY FOR LOST OR DAMAGED ITEMS DUE TO THE USPS ALL ORDERS CAN BE TRACKED BY THE TRACKING#LISTED FROM YOUR PURCHASE WE ONLY SHIP THROUGH EBAY FOR BETTER TRACKING OF THE PACKAGES PLEASE CONTACT US BEFORE LEAVING FEEDBACK WE STRIVE TO RESOLVE ANY ISSUES YOU MIGHT HAVE IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME THRU EBAY I RESPOND WITHIN 24 HOURS
|
|
|
freeborn cutter head MC-50-010
used. But never sharpened cabinet door set mc-50-010.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144761a6c6c-0x105-
|
|
|
LEITZ spindle moulder shaper molder cutter head
LEITZ 165139198 WE 500-1-50
|
|
|
LEUCO spindle moulder shaper molder cutter head
LEUCO 021-S19 167 967
|
|
|
122x60mm x 1 1/4"(bore) corrugated shaper cutter molder head plus knives and spa
Shaper Cutter Molder head for sale. It is used but still perfectly functional. blades are pretty sharp! downsides: there are a couple of slightly dull burn spots on part of one set of knifes(can be sharpened) And there are 4 of the 8 knife set screws missing and collars are missing set screws as well(not a big deal, your local hardware store should have some for a few bucks) the 1 1/4" to 1" adapter is kind of stuck in the bore. I didn't try very hard to get it out though. a little WD and a tap or two should get it out. what you see in the pictures is what you get: extra set of bull nose knifes included. Collars shims and nut included. spacers and adapters included as well. imprinted writing says: nbis 9000 mech vorschub 60deg Leitz Nr. 599 122 x 60 x 1 1/4
|
|
|
Pair Stark MP140/ 40 Universal shaper cutter molder multi profile insert head
Pair Stark MP140/ 40 Universal shaper cutter molder multi profile insert head. Both are in used condition. Please check out all the photos. Selling As Is with No Reserve. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144dcb9e1d5-0x103-
|
|
|
Carolina Specialty Tool Universal shaper cutter molder multi insert head EC2018M
Carolina Specialty Tool Universal shaper cutter molder multi profile insert head. Used condition. Please check out all the photos. Looks like a# EC2018M. Selling As Is with No Reserve. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144dd6deaa3-0x10e-
|
|
|
Spindle moulder? cutter head made by Leitz with angle
Spindle moulder? cutter head made by Leitz with angle Item Description You are bidding on a woodworking cutter head possibly from spindle moulder made by Leitz 190mm x 80mm x 40mm holeappx 20 degree angle looks to be in good condition Condition Used Shipping Details Shipping to anywhere in the UK mainland is £10.00 Payments Payment is required within 3 days of sale. This item is being sold by auction. By bidding or buying you accept that all and any health and safety responsability is entirely the buyers responsibility_gsrx_vers_526(GS 6.6.6(526)
|
|
|
Shaper Head And Large Cutter Set - Uncleaned But Sharp And Nice
Really great old shaper cutter set- cutters in wood boxes- 45 cutters- 5/8" arbor a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147290b339c-0x109-
|
|
|
OLIVER 125D SINGLE END TENON MACHINE - UPPER CUTTER HEAD
OLIVER 125D SINGLE END TENON MACHINE- UPPER CUTTER HEAD One Original Upper Cutter HEAD for an Oliver 125 Single End Tenon Machine HEAD IS IN GOOD SHAPE- GOOD NICKERS AND BLADES 2" Bore 7" Diameter 3 5/8 Width of Cut Also Available is One Upper and Lower Cutter Head Set for the Same Machine: PLEASE INQUIRE BUY IT NOW $275.00 Shipping: Buyer pays actual cost of shipping via UPS. No extra costs for packing or handling.
|
|
|
ShopSmith Moulder Shaper Head and Eight (8) Cutter knives
Up for sale is eight(8) moulder cutter knives and head. All are sharp and a few have never been used. Ready to cut and will work on almost any table saw
|
|
|
ShopSmith Moulder Shaper Head and Eight (8) Sets of Cutter knives
Up for sale is eight(8) sets of moulder cutter knives and head. All are sharp and a few have never been used. Ready to cut and will work on almost any table saw. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-147bdcb7681-0x108-
|
|
|
Shaper Cutter Head- Set of 3-Carbide 11738-B/750 GD (item 2)
Three Shaper cutter heads used in cabinet making. Carbide tips.75 bore hole(Item#2 for my reference only)
|
|
|
Grizzly H2876 3-1/8" Spiral Insert Cutterhead with H7136 Rub Collar Cutter Head
Nice used Grizzly Spiral Insert Cutterhead with matching Rub Collar for flush template shaping. Diameter: 4" Bore: 1-1/4" Height: 3-1/8" Number of Inserts: 33, Cutter Head Model# H2875. Rub Collar Model# H7136;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1482b11b489-0xcb-
|
|
|
STARK EUROPEAN STYLE 2 KNIFE SHAPER CUTTER HEAD SET - 2" TALL, 4" DIAMETER
1 3/8" bore. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
STARK CARBIDE BLADE REBATING SHAPER CUTTER HEAD - 2" HIGH, 4" DIAMETER
1 3/8" bore. Reversible blades. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
AMANA CUTTER HEAD w/knife
Amana cutter head used cond. not mint not excellent buying as is working cond. looks to be used very little with one knife. 61220 100mm x 1-1/4 bore max 9000 rpm set up for 2 knives
|
|
|
CGG Schmidt 6" 2 Knife Cutter Head 1-1/4" bore
CGG Schmidt 6" 2 knife cutter head catalog# MH206P6 1-1/4" spindle bore. Auction Includes-Cutter head-12 set screws-2 3" shim blocks-2 1" shim blocks- T shape Allen key for set screws Important-This Set is missing 2 3" shim blocks. The shim blocks can be purchased from CGG Schmidt. Posted with
|
|
|
Heavy Duty Molding Cutter Head, 4" 3 knife, 5/8" bore with 7 sets of HSS cutters
Heavy Duty Molding Cutter Head. 4" 3 knife, 5/8" bore with 7 sets of HSS cutters. No Rust or burns from over heating. Lightly used. 1" thick x 4" in diameter. Includes wood box. No lid. Email any questions.
|
|
|
Carbide Moulder Insert Tooling Cutter Head, 9000 rpm
A little surface rust. Specifies 9000 rpm as the maximum. Please note the hammer marks in the last two photos. 4 3/4 OD 1 1/2 ID Imprinted with this number: F03 122 21 247
|
|
|
Flury insert Cutter Head for Shaper
Hi You are looking at a very nice Flury insert cutter head with 13 different profiles. Swiss made 1.1/4" bore. Most blades have never been used. Please check out my other auctions.
|
|
|
Amana 3" Crown Moulding Cutter Head
This is a Amana SC662 3" crown moulding cutter head that was used to cut a total of 10' of stock for one project. 1.1/4 bore excellent condition. Please see my other auctions.
|
|
|
CRAFTSMAN Molding Cutter head 9-32003 not alot of use- dirty from sitting around
CRAFTSMAN Molding Cutter head 9-32003 not alot of use- dirty from sitting around CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. not alot of use- dirty from sitting around.this is all i have.cutter doesnt look used or used very little.see pics.close to 4 7/16" wide. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL ... moreBUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
|
|
|
Vintage Double Ended Shaper Blades (6 sets) and Cutter Head Assembly No Reserve
Vintage Shaper Blades Vintage Double ended steel blade cutters with cutter head Various profiles No makers mark(might be European-width/thickness/4mm hex) 5 double ended blade cutter sets 1 one-sided blade cutter set(bottom right) Blade/cutter Measurements: 1 5/8" to 2 3/16" long Profile Width: 22mm wide Thickness: 3mm thick Cutter head measurements: 4 7/8" long x 1 1/4" wide x 1/2" thick 5/8" arbor hole in middle 2 hex screw heads 4mm on each side to secure cutters Lightly cleaned Vintage condition. Appears to be lightly used. Your 100% satisfaction is guaranteed. Shipping VIA USPS Priority mail will be $8.75 to any US destination. General Information Photos are of actual item on auction and are part of the description. For your convenience. Photos are supersized and show item condition and detail. Items usually ... morehave no reserve and have a very low starting bid. Shipping and packing All items are shipped via USPS. It may not be as fast as FEDEX or UPS but it offers the most reasonable. Cost-effective way to ship merchandise. Can also be shipped by FEDEX ground(buyer's choice) Combined shipping for multiple purchased items are very much welcome and you will receive a shipping discount. Shipping info will be automatically uploaded to EBAY when I create your shipping label. This information will automatically be sent to you so you may track your shipment online. Packing: I am a perfectionist when it comes to packing. All items are packed with super care and attention to detail. Packing material Green Practices I try to be as environmentally friendly as possible. I am committed to offering the greenest shipping practices that I can. All of the clean packaging material that I use such as boxes, padded envelopes, open cell foam, bubble wrap, plastic bags, styrofoam(rarely used) that I use to ship my eBay orders has been recycled. The paper for packing slips and shipping labels, although new is made from recycled post consumer waste. Thought I'd share this with prospective bidders n
|
|
|
SPINDLE SHAPER CUTTER HEAD with LOCKEDGE 3/4" Bore and 2 1/2" Dia Lot# 627
SPINDLE SHAPER CUTTER HEAD with LOCKEDGE 3/4" Bore and 2 1/2" Dia Lot# 627. These are in real nice shape used but nice. Had these left over from our plant. Thanks for Looking
|
|
|
LRH K-1439 1 1/2" radius, 1 1/4" Bore three wing carbide cutter head for shaper
LRH K-1439 1 1/2" radius. 1 1/4" Bore three wing carbide cutter head for shaper in excellent condition. I am original owner and it was used lightly. Cost roughly $350 new. I have sold my shaper and no longer need the tooling.
|
|
 |