|
7 SUPERMAN Sunday pages. 1941=1946. G+. 4 1/2 pages. 3 1/3. W.BORING, J.BURNLEY
Seven SUPERMAN Sunday pages. 1941-1946. 4 half pages.3 thirds. Good Plus. WAYNE BORING. JACK BURNLEY, etc.
|
|
|
Lathe Tool Lot, Boring Bars, Turning tools, Carbide 3/4"-1" 16 pieces
I have a lot of machinist lathe tools for sale. There are boring bars ranging from 3/4" to 1" They are in good condition with no significant damage to the carbide. The boring bars have plastic cases. Some with caps, some without. There is also another set that has a nice wood case. The second photo shows 3/4 Carbide tipped lathe turning tools, these are also in good shape. Ruler Not included Thanks for looking
|
|
|
NICE ORIGINAL WILLIAMS AGRIPPA 1/2" BORING SLEEVE BAR ROD & BIT TOOL 4 LATHE
Nice- Original Williams boring sleeve with 3/16" bits installed. Sleeve is stamped 1/2" AGRIPPA PLAIN BAR JH WILLIAMS& CO. MADE IN U.S.A. 1/2" diameter sleeve is 8" long. nice Williams boring bar. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 Erickson Tool Dial Set Boring Bars 1" and 1 1/4" Shank
2 Erickson Tool Dial Set Boring Bars 1" and 1 1/4" Shank part numbers 2-80-148-025 and 2-80-036-020 used condition All sales final. Use shipping calculator for shipping Cost Payment must be received within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
WALTER WAUKESHA BORING BAR S04F STFCL 12 CR MACHINE SHOP TOOLING 1/4" SHANK
YOU ARE PURCHASING THE PICTURED BORING BAR. IT IS USED. IT IS LABELED: S04F- STFCL 12- CR I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES. FREE SHIPPING IF YOU BUY 5 OR MORE OF MY LISTINGS. OFFER GOOD FOR U.S. STATES SHIPPING ONLY. SOME LARGE ITEMS DO NOT QUALIFY. I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU!
|
|
|
Kennametal 1-1/4" Shank Boring Bar (S20-DVUNR3)
Kennametal Boring Bar(S20-DVUNR3) Shank Diameter: 1-1/4" Overall Length: 11-3/4" Hand of Holder: Right Hand Material: Steel This item is used and comes as shown with no hardware. Will ship out one day after receipt of payment.
|
|
|
CRITERION 1/2" SQUARE BORING HEAD w/ 3/4" SHANK Model S-1 1/2
CRITERION Square Boring Head 1-1/2" 3/4" Shank 1/2" Boring Hole Model S-1 1/2 Condition: Good Questions? call Metro Machine& Tool 732-650-0666
|
|
|
CRITERION 9BS MICRO PRECISION BORING HEAD, 1" BAR HOLE, 3/4" SHANK
Inventory Number: 04130630137 Manufacturer: Description: CRITERION 9BS MICRO PRECISION BORING HEAD. 1" BAR HOLE, 3/4" SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identica
|
|
|
MILLING MICRO ADJUSTABLE BORING BAR, 1-3/4" DIAMETER
Inventory Number: 11120340077 Manufacturer: Description: MILLING MICRO ADJUSTABLE BORING BAR. 1-3/4" DIAMETER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 1" STRAIGHT SHANK, 6-3/8" OVERALL LENGTH. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing ... moreon auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown,
|
|
|
CIRCLE MACHINE 1/4" INDEXABLE BORING BAR + INSERTS - #CSMI-250-3-5R
aims CIRCLE MACHINE 1/4" INDEXABLE BORING BAR + INSERTS- CSMI-250-3-5R read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Circle Machine Co. This is a used Indexable Boring Bar with Inserts in GREAT condition. Part# CSMI-250-3-5R Specifications: Head Diameter: 0.260" Current Boring Diameter: 0.267" Shank Diameter: 1/4" Overall Length: 3" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CIRCLE MACHINE 1/4" INDEXABLE BORING BAR + INSERTS- CSMI-250-3-5R ... moreCIRCLE MACHINE 1/4" INDEXABLE BORING BAR + INSERTS- CSMI-250-3-5R Reliable Tool Inc. c 2011 | Powered by
|
|
|
Heavy Duty 1-1/4"Boring Bar Tool Post Holder
1-1/4" x 16" Boring Bar This boring bar holder slides over a Lantern/Rocker Type Tool Post and you use the block and the toolpost saucer and bolt to lock it in place. 17 Pounds Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
VALLENIITE ADJUSTABLE BORING BAR - 1-3/4" DIAMETER HEAD & 1-1/4" SHANK
This is a Vallenite adjustable boring bar. The bar has a 1-1/4" shank and a 1-3/4" head. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.35. Use the shipping calculator for all international addresses. If you purchase any of my other listings. I will combine shipping on any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping, commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win the auction for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. See my listings for: Sunnen hone tooling; Hardinge lathe parts& tooling; other machine shop tooling; ... moremarine& outboard motor parts and manuals; Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s. Mad Magazines and paperback books from the 60’s&b 70’s and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GENUINE CRITERION BORING HEAD ARBOR Ø 1-1/4" straight shank. 1-1/2" 18 thread.
NO SHIPPING OUTSIDE THE 50 USA STATES. I COMBINE SHIPPING TO SAVE YOU MONEY. Processed within 3 business days of payment. Here's a Genuine Criterion Boring Head arbor Ø1-1/4" straight shank. 1-1/2" 18 thread. Just purchased here on eBay originally attached to a genuine Criterion Boring Head. There are NO brand markings. But it was a perfect match to the boring head diameter where the two came together, so I'm confidently selling it as genuine Criterion. Replaced it with r8 shank to better suit my needs. See photos of this connected to my criterion head(NOT BEING SOLD HERE) Do not try to say I ripped you off when all you receive is the arbor itself. Well used. But in very workable condition for a precision machinist. My loss is your gain! CHECK OUT MY OTHER LISTINGS FOR MORE GREAT ITEMS! So here's a great item to ... moreenjoy or give as a gift! Thanks! If you win. I'll expect payment as normal, but eBay gives you the option to return a defective item and receive a full refund up to 14 days after you receive it(Buyer pays return shipping) If I have not been contacted to request a refund by the end of 14 days after delivery(confirmed via USPS tracking number) then there will be no returns. Thanks and Enjoy! Here are all the photos in high-resolution: HAPPY BIDDING! Posted with
|
|
|
SANDVIK BORING BAR BUSHING 3/8 I.D. 1 1/2 O.D. 4 1/8 LONG 132P 240 641 B TOOLS
YOU ARE PURCHASING THE PICTURED SANDVIK BORING BAR. IT IS USED IT IS LABELED: SANDVIK 132P- 240641- B PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 3:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! GREY
|
|
|
KENNAMETAL 1 3/4" BORING BAR S28 NER4 NB3 (442) TS4
I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted. INTERNATINAL SHIPPING PRICE VARIES. Powered by The free listing tool. List your items fast and easy and manage your active items. On Apr-12-13 at 17:12:37 PDT. Seller added the following information:
|
|
|
Carboloy Boring Bar SI-PTFRNR-24-4 MIN Bore 1.954 14" Length 1-3/8" 1-1/2" Shank
Carboloy Boring Bar SI-PTFRNR-24-4 MIN Bore 1.954 14" Length 1-3/8" Flat Shank Demision 1-1/2" Round Shank Demision Condition: NEW. In box NEW. No box NEW. Old inventory XX USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: Been held in storage Item may need to be resharpen before resuse SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is ... moredue within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for loc
|
|
|
ERICKSON INDEXABLE MICROBORE BORING HEAD W/ 1-1/2" SHANK - 4-1/2"
aims ERICKSON INDEXABLE MICROBORE BORING HEAD W/ 1-1/2" SHANK- 4-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Erickson Tool Co. This is an Indexable Microbore Boring Head in good condition. Model# 3-81-147-060 Specifications: Current Boring Diameter: 4-1/4" Shank: 1-1/2" straight. Overall Length: 10" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ERICKSON INDEXABLE MICROBORE BORING HEAD W/ 1-1/2" SHANK- 4-1/2" ERICKSON INDEXABLE MICROBORE BORING HEAD W/ 1-1/2" SHANK- 4-1/2" ... moreReliable Tool Inc. c 2011 | Powered by ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13e191b4480-0x101-
|
|
|
DEVIEG SS12-63 MILLING 2-1/4" MICRO ADJUSTABLE BORING BAR, 1-1/4" SHANK
Inventory Number: 11120340060 Manufacturer: Description: DEVIEG SS12-63 MILLING 2-1/4" MICRO ADJUSTABLE BORING BAR. 1-1/4" SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 2-1/4" DIAMETER, 1-1/4" STRAIGHT SHANK, 7-5/8" OVERALL LENGTH. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to ... morehave it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items
|
|
|
GLOBAL CNC BORING BAR SLEEVE 1.5 O.D. X .50 I.D. X 4.75 LONG.USED BUT NICE
Hello. Up for your consideration to bid on on is a Global CNC Boring Bar Sleeve/ Adaptor/ Bushing/ Tool Holder. These are sought after boring bar sleeves and I am listing a handful of them that are in good used condition. Please ask any questions before bidding. I am starting these a t a very low pr ice with no reserve. Highest bidder will win them. I will list the details below. Thank you for looking and good luck. Brand: Global CNC Outside Diameter: 1.500 Inside Diameter: 500 Overall Length: 4.750
|
|
|
ENGINE LATHE or MILL 1 1/4" x 10" BORING BAR tool holder 5/16" hss cutting bits
good used lathe or mill boring bar mfg not marked holds 5/16" HSS bit at 90 degrees approx 1 1/4" shank x 1 7/8" dia x 10" long 5/16" HSS bit included please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Kennametal Insert Carbide Boring Bar CuT Down to 3-1/4" Long
A Kennametal Carbide Inset Boring Bar 3/4" Dia.In Excellent Condition Cut Down to 3-1/4" Long. Free S&H.
|
|
|
rtw top notch boring bar with 3 inserts.1 3/4" shank.coolant thru.
ng3 a28 nel4.uses# 4 inserts.14" long.comes with 1 threader& 2 groovers.1@ 3/16 and 1@ 1/4 wide. will combine shipping.
|
|
|
kennametal adjustable ,interchangeable head boring bar.1 1/4 shank.14" long.
adjustment screw moves freely.no hangups.will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e3d98684c-0xf9-
|
|
|
ONE 1-1/2" BORING BAR TOOL HOLDER,CAT-50 SHANK,4" GAGE LENGTH
Inventory Number: 11120830895 Manufacturer: Description: ONE 1-1/2" BORING BAR TOOL HOLDER.CAT-50 SHANK,4" GAGE LENGTH Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical
|
|
|
1589. Five 3/8 Inch Boring Bars Lathe Flycutter 4 1/2"long Carbide Tipped
These are five 3/8 inch boring bars. Three of them are four inches long. Two of them are five inches long. They are in good usable condition. They appear to have been made for a cut off tool but we have used them for boring bars and as flycutter tools. They have all been sharpened and dipped in a plastic to protect them. The front of the carbide is wider than the rest of the tool so this gives them the correct clearance for them to be used as boring bars or flycutter or lathe bit. I do not leave feed back until the buyer leaves feed back. If you have a problem contact me. I have always been able to work something out. I try to give a fair description and take plenty of pictures so you can have confidence in what you are buying. When used items are being sold. Be aware that normal wear and tear will be present. If there are any major flaws, ... moredamage, or defects we will try to accurately describe such or have pictures showing it. But if you have any questions about any items feel free to e-mail me. I ask for 3 days for shipping but usually ship the day after I receive payment. Sometimes the same day. If you are bidding on more than one of my items and want to wait to see if you get the last item before you pay just let me know. That way you can save on the shipping and postage as I'll pack it all in one package and then send you the invoice for it all. If the postage price quoted by Ebay is one dollar or more over than the actual postage cost we will refund the difference. If there is anything else that I can help you with don't hesitate to ask. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Very Nice! Import Model 223-1150 2-1/2" BODY 4" CAP R8 SHK Boring Head
Up for auction is a Import Model 223-1150 2-1/2" BODY 4" CAP R8 SHK Boring Head Th is Tool was acquired previously owned at our store. Cosmetically it is in exc ellent shap e with very min imal signs of previous use. Tool Holding- 2-1/2 BODY 4 CAP R8 SHK BORING HEAD. Boring Head with R8 Shank Body Diameter: 2-1/2 Shank Taper: R8 The only items contained in this auction are what is described above and what you see in the photographs.if it is not in the pictures then it does not come with the auction. Please see photographs for more detail and feel free to email with specific questions. Valued customers. Please be aware that the Item Specifics section is automatically provided by eBay. These details are sometimes incorrect! ALWAYS confirm information of the specifications critical to you. Thank you! Buy with confidence! Please take ... morea moment to read our auction policies: Customer Service Policies If you cannot complete the payment transaction please do not bid on the item. Items have a fourteen(14) day from confirmed receipt of goods return policy unless otherwise stated. This means you have fourteen(14) days from confirmed receipt(FedEx or USPS time stamp) to let us know you are not happy! ALL INTERNATIONAL BIDDERS MUST CONTACT US FOR A SHIPPING QUOTE PRIOR TO BIDDING We will not. Under any circumstance, honor our return policy if it is stated in the item description that the item is being sold"AS IS" No exceptions to this policy will be considered. Our return policy will also not be honored in instances of"Buyer's remorse" The return policy will. However, be gladly honored if the item is not as described. We do our best to describe every item accurately, but have been known to make mistakes! We will be more than happy to leave feedback after a Buyer’s feedback has been posted. Office Hours are between 10 a.m. and 6 p.m. Mountain Time(Phoenix. Arizona) Monday through Friday(excluding major Holidays) Our email is checked frequently. Response time almost always occurs within 24 hours
|
|
|
1-13/16" - 2-5/8" DEVLIEG MICROBORE SS12-60 BORING BAR 1-1/4" SHANK
DEVLIEG MICROBORE BORING BAR PART NO. SS12-60 1-13/16" 2-5/8" RANGE. 4-1/2" MAX. BORE DEPTH 1-1/4" STRAIGHT SHANK. 7-3/4" OVERALL LENGTH Very good used condition. As pictured. Payment due within seven day of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
2) 1" DIA. STEEL BORING BARS - EVEREDE 12" & 12 3/4" TOOLMAKER MADE BORING BAR
2) 1" DIAMETER STEEL BORING BARS EVEREDE 12" LENGTH 12 3/4" LENGTH TOOLMAKER MADE BORING BAR QUALITY ITEMS READY FOR USE MADE IN THE USA! SHIP WT. 6 LBS. For multiple purchases ending within 3 days of each other please hold payment for invoice. To receive combined shipping discount. For auctions ending more than 3 days apart please pay won auctions in full and receive shipping discounts on final sale. There is a small handling fee on all sales, which is included in shipping cost. Multiples to be determined on a case by case basis, upon the number to be packed. I ONLY offer free shipping when listing is marked as such and Best Offers are accepted plus shipping and handling charges, unless otherwise listed. Will send free shipping with best option UPS or USPS. Please take time to view all photos, read all descriptions, and ask ... morequestions if necessary before bidding. Thank You for viewing, bidding and purchasing, GOOD LUCK! Check out my! Be sure to add me to your!
|
|
|
Universal Boring Bar Tool Holder 1/2 5/8 3/4
You are looking at a Universal Boring Bar Tool Holder. The boring bar sizes are 1/2" 5/8" and 3/4" If you need more measurements to see if it fits your lathe let me know. Please see my other listing as I've got another one with different boring bar sizes. Thank you much.
|
|
|
circle 1" shank boring bar,with 4 inserts.coolant thru.
looks like its only been used once.excellent cond. will combine shipping.
|
|
|
12 WOOD WORKING BORING BITS -5/16",3/8",1/2",5/8", 3/4" & 1-1/2"
12 woodworking boring bits. Some new some used. Sizes as follows one 5/16' One 3/8" one 1/2" three 5/8" four 3/4" two 1-1/2"Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e54269702-0xfd-
|
|
|
FLYNN 4-1/2" BORING HEAD MODEL 47 ON #4 MORSE TAPER SHANK
ONE USED FLYNN 4-1/2" BORING HEAD MODEL 47 ON#4 MORSE TAPER SHANK HOLDS 1" BORING BARS SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International ... moreRates are reflected in our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e54664a1e-0x101-
|
|
|
Two 1-1/2" Shank Boring Bar RCMLN 24 4 H2M. Used
Two 1-1/2" Shank Boring Bar RCMLN 24 4 H2M. The length of the shank was cut short The total length of each tool is now 6" and 6-1/2" One has some wear at the tip. Under the insert seat. Both are used and in working condition. You get it just as you see in the pictures Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e550b491f-0xfe-
|
|
|
Three, Boring Bars BHP-NV-120 LH. 1-1/2" & 1-3/4" Shanks Valenite
Three. Boring Bars All are in well used condition Two are BHP-NV-120 LH. with 1-1/2" Shanks The length of the shank was cut short on both bars. The total length of each tool is now 7-3/8" 9" The 1-3/4" shank bar is marked valenite BHP-NV-110 L.H. This bar has a total length of 8-7/8" You get them just as you see in the pictures Posted with
|
|
|
Ridgway 1/4" / 6mm Wood Boring Bit 7 3/4" Total Length
Ridgway 1/4" 6mm Wood Boring Bit 7 3/4" Total Length As Photo Any questions please ask.
|
|
|
NICE 1/2" BORING CUTTING TOOL HOLDER 7/16" 1/2" SHANK TURRET 4 MACHINIST LATHE
Nice 1/2" boring cutting tool holder on a 7/16" x 1 3/8" shank. Adapter sleeve increases diameter from 7/16" to 1/2" Allen wrench is also included. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e63f12f85-0xfd-
|
|
|
CRITERION 1/2" BORING HEAD w/ 3/4" SHANK - # DBL-102
Here's a Criterion DBL-202 Boring Head 3/4" Shank. In very good working order. I will ship to the 48 continuous United States only for $15.00. All others please email for a price. Please email any question before bidding. Good Luck.
|
|
|
BORING BAR 1" DIA. X 2" LONG SHANK CARBIDE TIPPED OAL 4 3/8 #7870
DESCRIPTION BORING BAR 1" DIA X 2" SHANK OAL APPROX. 4 3/8" ABOUT 9/16 DIA. CARBIDE TIPPED USED BUT APPEARS TO BE IN GOOD SHAPE. Please browse our store and other listings for more cutters. We offer combined shipping. If you have any questions feel free send me a message.New items arriving daily so if you dont see what you want please check back. TERMS and CONDITIONS We try to describe every item to the best of our ability. Please ask any questions and we will be glad to answer you quickly. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not ... moreEnd Auctions Early. So; Please Do Not Ask! 4: We accept refunds if the item is not as described. Please email me with your intention to return within 14 days of receiving the item. Shipping costs are the responsibility of the buyer. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. We are unable to test some items at this location. 6: When we say it is NEW; It will be never used or old stock. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. 8: All items over $100.00 in declared value will be shipped with insurance that will be figured at the time of invoice. 9: Concerning Calibration; Items are not tested or calibrated unless otherwise stated PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufac
|
|
|
BORING HEAD SHANK DEVLIEG MICROBORE SS15-ADL-1412 1-1/4" SHANK X 3" #9466
BORING HEAD SHANK DEVLIEG MICROBORE SS15-ADE-1412 1-1/4" SHANK X 3" LONG 1-1/4" DIA. BOSS X 4" DIA. 4" OVERALL LENGTH USED ITEM. MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are ... moreaccepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are so
|
|
|
1" Shank Boring Bar SANDVIK A16T-DCLNR 4
1" Shank Boring Bar SANDVIK A16T-DCLNR 4 Very good condition. Looks like it was never used Total length is about 12" You get it just as you see in the pictures Posted with
|
|
|
NMTB 40 TAPER - 3 1/4" BORING & FACING HEAD mill tool holder bar 1" hss bit
good used nmtb 40 taper- boring& facing head Devlieg 3 1/4" dia with 1" hss bit FREE SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KDK QUICK-CHANGE BORING BAR TOOL HOLDER - 1-3/4" - #205-1
aims KDK QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" 205-1 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by KDK. This is a Quick-Change Boring Bar Tool Holder in good condition. Model# 205-1 Features: Rugged- No chatter or vibration. No time wasted with shims. Unlimited versatility. Safe and simple to operate. Speed your lathe operations up to 90% For fine precision work to heavy-duty cutting. Specifications: Capacity: 1-3/4" Bottom Dovetail: 1.720" Overall Dimensions: 2-3/4" wide x 4-3/4" long x 3-1/4" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by ... morevisiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KDK QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" 205-1 KDK QUICK-CHANGE BORING BAR TOOL HOLDER- 1-3/4" 205-1 Reliable Tool Inc. c 2011 | Powered by
|
|
|
BORING BAR 1-1/2 OD X 7-3/4 OVERALL LENGTH #424U-MCLNR4NB9 (C-3-10-6-42)
C-3-10-6-42) INDUSTRIAL SURPLUS. USED, THIS IS A BORING BAR 1-1/2 OUTSIDE DIAMETER X 7-3/4 OVERALL LENGTH#424U-MCLNR4NB9. CONDITION IS 6 ON A 1-10 SCALE. WE ARE TRYING SOMETHING NEW(TO US) AND HAVE EXAMINED THIS LOT OF TOOLS UNDER MAGNIFICATION AND RATED THE CONDITION OF THE TOOL ON A 1 TO 10 SCALE. WE THEN CALCULATE OUR PRICING ACCORDING TO THE CONDITION AND CURRENT CATALOGUE PRICES. REMEMBER CONDITION RATINGS ARE SUBJECTIVE. 10- WOULD BE BRAND NEW OUT OF THE BOX. 9- IS LIKE NEW EXCEPT STAINED FROM LUBRICANTS. MAYBE A SMALL DING FROM HANDLING BUT WON’T AFFECT CUTTING. 8- HAS LIKELY BEEN USED. A SMALL AMOUNT OF WEAR LAND SHOWING. SOME MINOR DINGS. 7- WILL HAVE SOME DINGS MAYBE A SMALL CHIP BUT SHOULD STILL WORK OK. 6- MAY HAVE A FEW SMALL CHIPS OR DINGS BUT SHOULD THREAD A FEW PARTS. I WOULDN’T USE IT FOR LONG RUNS. 5- IS GETTING PRETTY RATTY ... moreBUT IT SHOULD WORK A TIME OR TWO. 4- WE GENERALLY DISCARD ANYTHING AT OR BELOW THIS LEVEL. REASONABLE BEST OFFERS CONSIDERED FOR MORE THAN 1 ITEM. IF YOU NEED MORE PIECES THAN WHAT WE SHOW. LET US KNOW. CONTACT US THRU EBAY MESSAGING FOR SPECIAL PRICING. WE VALUE OUR GOOD FEED BACK RATING AND WANT TO MAINTAIN IT. SO IF YOU HAVE AN ISSUE, EMAIL US OR CALL OUR TOLL FREE NUMBER IN OUR HEADING BEFORE YOU POST. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. PLEASE ALLOW ADEQUATE TIME TO CLEAR CUSTOMS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. WE ACCEPT PAYPAL AND VISA. MASTERCARD, DISCOVER AND AMERICAN EXPRESS VIA OUR PROPAY ACCOUNT. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU DON'T FIND WHAT YOU NEED. LET US KNOW. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%
|
|
|
Sandvik BORING TOOL HOLDER : TATL-16M : 1" Cutting DIA x 4" Length
You are bidding on this Boring Tool Holder The details include: Brand: Sandvik Model: TATL-16m 1" Cutting DIA, Shaft: 4" L x 1" x 1" vL175.1-2525M, It is in great condition. If you have any questions please message us
|
|
|
CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK & 4 INSERTS - #SI-SDJCR-8-2
aims CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK& 4 INSERTS- SI-SDJCR-8-2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Carboloy. This is an Indexable Boring Bar with 4 Inserts in good condition. Model# SI-SDJCR-8-2 Specifications: Bore Diameter: 487" Shank: 1/2" Overall Length: 5-1/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK& 4 INSERTS- SI-SDJCR-8-2 Reliable Tool Inc. c 2011 | Powered by
|
|
|
CRITERION DBL-203 BORING HEAD 3/4" TOOL BORE BT 40 SHANK 1-1/2" 18 THREAD .001"
Criterion DBL-203 Boring Head.35" 11" Capacity BT-40 Shank 1-1/2"18 Threaded mounting hole in head 3/4" Boring Bar Hole 15/16" on Center 3/4" Cross Hole.001" Graduations Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
BORING BAR HOLDER FOR LARGE DIAMETER 1.3/4" SHANK WITH 3/4" HOLDER
YOU BIDDING ON USED BORING BAR HOLDER FOR LARGE DIAMETERS.1.3/4" SHANK X 7.1/2" WITH TOOL SIZE 3/4" IF YOU HAVE A QUESTION. PLEASE ASK BEFORE BIDDING. SHIPPING AND HANDLING IN THE LOWER 48 STATES $15.00. I DO COMBINED SHIPPING.
|
|
|
(2) Boring Bars with Carbide Insert, (1) APT Tridex, (1) Taiwan, 3/4" x 4", EXLT
2) Carbide insert boring bars with(8) Carbide Inserts to get you going. 1) tool is marked: APT Tridex. EMO87-34, USA, CIC" 3/4" shank with 1 flat x 4" long. 1) Is marked: Made in Taiwan. 3/4 x 3/4" 3/4" diameter x 3 1/2" long. Both are in excellent condition. We include(8) various used carbide inserts to get you going. Some are used with a good edge or 2. Some are newer with all 3 good edges. 2) Allen wrenches are included for the clamps. Shipping and handling costs for this listing will be $4.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. Visit our eBay store for more great values. We will ship promptly. We want your 5 star feedback and will do all we can to make sure you are satisfied with your purchase. Please contact ... moreus first if you have any issues with your order upon receipt. Michigan sales will be invoiced with sales tax. Thank you! 0113056853) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e77736878-0xfa-
|
|
|
2 INDEXABLE BORING BARS W/ 1-1/4" SHANK
aims 2 INDEXABLE BORING BARS W/ 1-1/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. These are 2 Indexable Boring Bars in good condition. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameters: 1-27/64" Approx. Shanks: 1-1/4" ... moreClamping System: Screw On. Overall Lengths: 7-1/4" 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 INDEXABLE BORING BARS W/ 1-1/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
BORING BAR 7240-2TD104 15/16 X 3 1/2 WITH 1/4" HOLE #8071
DESCRIPTION BORING BAR 7240-2TD104 15/16 DIA X 3 1/2 LENGTH WITH 1/4 DIA. HOLE AT 45 DEGREES AND FINE FEED ATTACHMENT ON A CARBIDE BIT 1" DIA. SHANK X 5 1/4" OVERALL LENGTH USED BUT APPEARS TO BE IN GOOD SHAPE. Please browse our store and other listings for more cutters. We offer combined shipping. If you have any questions feel free send me a message.New items arriving daily so if you dont see what you want please check back. TERMS and CONDITIONS We try to describe every item to the best of our ability. Please ask any questions and we will be glad to answer you quickly. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in ... more1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. So; Please Do Not Ask! 4: We accept refunds if the item is not as described. Please email me with your intention to return within 14 days of receiving the item. Shipping costs are the responsibility of the buyer. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. We are unable to test some items at this location. 6: When we say it is NEW; It will be never used or old stock. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. 8: All items over $100.00 in declared value will be shipped with insurance that will be figured at the time of invoice. 9: Concerning Calibration; Items are not tested or calibrated unless otherwise stated PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or
|
|
|
J.H. Williams No.80 Boring Tool Holder with 1/4" boring bar
Williams No. 80 boring bar lathe tool holder. The top piece is reversible so you can use up to ½” boring bar. Tang/shank actual size 31/34” x 7/8” x 3” Good used condition. No damages. This is great to use on your Atlas. South Bend Logan Craftsman or other metal lathes that have a lantern post tool holder. I have other lathe tool bit holders listed. And will be happy to combine shipping.
|
|
|
R8 Shank For Narex VHU 1-1/4" Universal Boring Head
Never used R8 shank for Narex Vhu 1-1/4 boring head.
|
|
|
BORING BAR CARBIDE INSERT B1108 INSERT TP32 1 X 5 1/4"
BORING BAR CARBIDE INSERT B1108 INSERT TP32 1" X 5 1/4" It measures 7/8" on the flats. What you see is what you get. I would say this unit is in very good condition and with two new tips it is ready to go to work. It will ship USPS Priority at $5.35. NO RESERVE
|
|
|
SET OF 2 1 1/4" X 12" BORING BARS FOR TOP NOTCH LH COMPLETE WITH CLAMPS & SCREWS
SET OF 2 TOP NOTCH LEFT HAND BORING BARS 1 1/4" DIAMETER 12" OVERALL LENGTH COMPLETE WITH CLAMPS& SCREWS IN PLACE AS SHOWN GOOD AS NEW DISTRIBUTOR'S OVERSTOCK 8 LBS* ONLY SET*
|
|
|
Ward Boring Head w/ 4" Shank 3/4" ID 1-1/2" OD
This item is a boring head with a 4" shank. Shank ID: 3/4" Shank OD: 1-1/2" Ward manufacturing head has a 3/4" bore T-Slot Dimensions: 3-1/2" Length x 1-11/16" Large Width) 1-3/16" Small width) x 1" Height. Overall dimensions: 6" x 4-1/2" x 3-1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used ... moreon truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bid
|
|
|
5 Solid Carbide 1/4" Shank x 1.1 " depth of cut Boring Bars by Accupro
GREAT DEAL! This auction is for a Lot of 5 Solid Carbide 1/4" Shank Boring Bars. Made in the USA. These boring bars have been glently used. But are still in excellent condition. Lots of cutting life left. Original cost $23 each. I have been it the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 30 years. Ask about many other tooling items- solid carbide boring bars, end mills, drills, taps, reamers, tool holders, scales, number& letter stamp sets, ect. If you win more than 1 item, please wait untill we send you an invoice with combined s&h costs. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item Buyer pays $6.00 s&h anywhere ... morein the USA(50 states)this includes delivery confirmation on all items)No APO mailing addresses on this item) We ship to USA mailing addresses only. We gladly combine s&h costs on multiple auction won in the same day. 1st item s&h is full price. Each additional item s&h is 1/2 price. We do not do pick-up or delivery on any local sales. PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an effort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. I combine shipping on multiple items won in the same auction day. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was received in) and we will refund your payment.
|
|
|
Lathe Boring Bar 3/4" X 11" 1/4 Sq tool bit
Lathe Boring Bar 3/4" X 11" 1/4 Sq tool bit This item is in good used condition and fully functional. Will ship by USPS Priority Mail and cost $11.00. Powered by SixBit's eCommerce Solution
|
|
|
SOLID CARBIDE KENNAMETAL 1 1/4" x 15 3/16 INCH BORING BAR DE VIBRATOR 1.250
CARBIDE BORING BAR Here is a SOLID CARBIDE KENNAMETAL 1 1/4" x 15 3/16 INCH BORING BAR with the DE VIBRATOR package 1.250. The bar is used but is in very good condition. See pictures. Use a bar that gives very little chatter in deep holes. The bar looks like it takes a square cutting bar. But there are heads available on the net that it could be replaced or use as is. The De Vibrator might or might not be working but sometimes it just takes a bump to free the inside but you are buying it as is. Item Photos, Please check my other auctions if you are interested in unusual items or books because I am continually adding new items. I will gladly combine shipping. Be sure to add me to your favorites list! Summary of My Selling Policies Payment 1) We accept payment by Paypal 2) Payment is due within 10 days of the end of auction. If payment ... moreis not received non-paying bidder alert will be issued. Shipping 1) We ship mostly in the US due to the new policies. The shipping. Handling and insurance fees are fixed and stated in the auction 2) Shipping on this item is calculated at the PRIORITY MAIL rate. 3) Shipping discounts offered for multiple purchases shipped to the same address. 4) Insurance is always available. Please email me for cost. Delivery 1) Items are usually shipped as soon as payment is received. 2) We ship Monday thru Saturday. Refunds& Returns 1) ALL of our auctions are Guaranteed. In the unlikely event we mistakenly misrepresented an item. We offer a Full Refund of the Bid Price. Just email us within FOUR days of delivery. Bidders are still responsible for ALL shipping, handling and insurance costs, including ALL return shipping costs. 2) Please understand that all information pertaining to age. Condition, origin, etc. are approximations. Unless specified, all items are used, second-hand, or antique. We do not sell on approval. If you are unsure of any information provided or require additional information, please email us Prior to Bidding. 3) Please inform us before returning an item. Item will not
|
|
|
4 IRWIN WOODWORKING AUGER BITS 1/2 INCH BORING
This sale is for 4 Laboratory Surplus IRWIN 1/2" woodworking auger bit. Some bits do not have mfg. listed on them. Buyer to pay $5.35 shipping. Questions call Mark 916-761-6310.
|
|
|
Three 1-1/2" Shank Boring Bars RCMLN 24 4 Used
Three 1-1/2" Shank Boring Bar RCMLN 24 4. The length of the shanks were cut short. The total length of each tool is now 9-1/2" 8" and 5-1/2" One has some wear at the tip. Under the insert seat. And another is missing the clamp. used condition. You get it just as you see in the pictures Posted with
|
|
|
Kennametal Kendex Boring Bar B 1218 C Used 2 1/4" x 16" TPG 433 insert, Oil Hole
Kendex Boring Bar B 1218 C Used. 2 1/4" diameter x 16" long. Has Oil Hole, Thru Coolant) Uses TPG 433 carbide inserts. Shipping is $20. for Fedex ground to lower 48.
|
|
|
ENGINE LATHE or MILL 5/8" x 5 1/4" BORING BAR tool holder hss bit EVEREDE USA
good used lathe or mill boring bar Everede USA approx 5/8" shank x 5 1/4" long HSS bit included please check my other auctions and happy bidding! will ship for $5.80 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e922527e2-0xf5-
|
|
|
1-1/4" Shank CKI Boring Bar RCMLN 204 Used
1-1/4" Shank CKI Boring Bar RCMLN 204 The length of the shank was cut short. The total length of tool is now 8-1/4" used working condition. You get it just as you see in the pictures Posted with
|
|
|
1-1/4" Shank Boring / Threading / Grooving Bar R166.0KF-020-3 Used
1-1/4" Shank Boring/ Threading/ Grooving Bar R166.0KF-020-3 Marked. Made in USA The length of the shank was cut short The total length is now 7-1/2" used working condition. You get it just as you see in the pictures Posted with
|
|
|
5/64" - 1-1/4" KAISER 112.311 FINISH BORING HEAD W/ .0005" ADJUSTMENT
KAISER FINISH BORING HEAD SWISS MADE MODEL 112.311 5/64" 1-1/4" BORING RANGE 1 DIV. =.0005" DIA. KA5 CONNECTION Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, or PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
SWEET!! NAREX VHU 1-1/4" FACING & BORING HEAD w/ CASE + ACCESSORIES
aims SWEET! NAREX VHU 1-1/4" FACING& BORING HEAD w/ CASE + ACCESSORIES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Narex in Czechoslovakia. This is an Universal Facing& Boring Head in EXCELLENT condition. Model# VHU Features: This Facing& Boring Head is a very versatile tool. With this tool it is possible to carry out operations such as facing. Boring, turning O.D. recessing and undercutting. The Narex Vhu- as a boring device- considerably ... moreincreases possibilities of boring. Drilling and milling machines. These heads are suitable for precision boring of cylindrical holes, and for machining of external cylindrical surfaces. The boring head Vhu by means of an automatic slide feed makes possible facing. Backfacing and taper machining. The slide feed is adjustable in three or four grades and is stopped on adjustable dog by the pin clutch. The feed is derived from the rotary motion of the head. If one of the feed is adjusted, the pin of the clutch is put in and the brake ring is held by means of the stop bar. The adjustment screw serves for quick adjusting of side and. On the contrary, the worm with the scale is used for fine adjusting of precision boring. 1 division = slide movement of.0005" Specifications: Operating Accuracy: 0002. Boring and facing range from: 0 up to 9. Max. adjustability of slide: 1.375" Max. dia. of slide: 2.750. Various automatic slide feeds per revolution: 0016" 0032" 0048" Graduation of sensitive: 0005" Quick return per revolution: 030" Diameter of tool post holes in slide: 5/8" Height of Head without shank: 3.125" Comes as shown in pictures. C
|
|
|
FRANCE!! ENCO 1/2" BORING / FACING HEAD w/ 3/4" SHANK + CASE
aims FRANCE! ENCO 1/2" BORING/ FACING HEAD w/ 3/4" SHANK + CASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in France by Enco. This is a Boring and Facing Head in good condition. Features: Accuracy guaranteed within 0.0002" over 3/4" travel. Permits automatic facing without stopping spindle. A high precision tool designed for accurate tooling and production work. All working parts hardened and ground. Carriage is operated manually when ... morespindle is stopped. Automatic feed is accomplished while the spindle is turning. Automatic feed can be measured when using 0.0035" radial feed. Specifications: Head Diameter: 2-11/32" Overall Head Length: 3-1/8" Boring Bar Hole Size: 1/2" Cross Hole Diameter: 1/2" Shank: 3/4" Straight. Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. FRANCE! ENCO 1/2" BORING/ FACING HEAD w/ 3/4" SHANK + CASE FRANCE! ENCO 1/2" BORING/ FACING HEAD w/ 3/4" SHANK + CASE FRANCE! ENCO 1/2" BORING/ FACING HEAD w/ 3/4" SHANK + CASE FRANCE! ENCO 1/2" BORING/ FACING HEAD w/ 3/4" SHANK + CASE Reliable Tool Inc. c 2011 | Powered by
|
|
|
Armstrong no.09-X Boring Bar 3/4 dia x 11" w/ 1/4 Boring Toolbits at Each End
Armstrong no.09-X Boring Bar 3/4 dia x 11" w/ 2 side flats& 1/4 Boring Toolbits at Each End. 1 end angular& 1 end straight. Exc cond but light staining(no pitting) Replacement cost about $100. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address. I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 11.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
U.S.A!! CRITERION BORING HEAD W/ 3/4" SHANK - 1/2" CAP.
aims U.S.A! CRITERION BORING HEAD W/ 3/4" SHANK- 1/2" CAP. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Criterion. This is a Boring Head in GREAT condition. Model# 002 The 002 Series Boring Heads are very effective in limited space applications. This 002 Series feature integral shanks and single-hole bar holders. Here is a small head that will be in constant demand in any shop. Note the wide base bearing surface that assures maximum ... morerigidity even when the bar holder is in an offset position. This wide base design is a Criterion innovation that increases bearing surfaces by 50% over older models. Specifications: Head Diameter: 1-1/2" Overall Head Length: 2-1/8" Capacity: 1/2" Shank: 3/4" Overall Length: 3-1/2. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! CRITERION BORING HEAD W/ 3/4" SHANK- 1/2" CAP. Reliable Tool Inc. c 2011 | Powered by
|
|
|
MORI SEIKI 1 3/4" BORING BAR HOLDER
MORI SEIKI 1 3/4" BORING BAR HOLDER EQUIPPED WITH: 1 3/4" MORI SL2- AVAILABLE: 10- WGT: PRICE: FOB BROOK PARK. OH- $ 145.00/EACH SUBJECT TO PRIOR SALE BT 6668 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
LATHE BORING BAR WARNER & SWASEY M-4367 1 3/4 X 9 #8129
LATHE BORING BAR WARNER& SWASEY M-4367 1 3/4" DIA X 9" LONG 1/2 SQUARE TOOL BIT CAPACITY THIS ITEM IS USED BUT APPEARS TO BE IN GOOD SHAPE TERMS and CONDITIONS We try to describe every item to the best of our ability. If you have a question. Please send us a message and we will be happy to try to get you an answer quickly. SHIPPING We do offer combined shipping so if you purchase more than 1 item. Please wait for an invoice before paying. We will save you as much money as possible on shipping costs. Some of our items are free shipping. We will only charge a handling fee if we have to build a crate for a large piece. The cost will be printed on the specific ad. HANDLING TIME We ship within 24 hours of receiving payment unless the payment is received after 10:00 a.m. on Saturday. All paid sales after 10:00 a.m. Saturday are shipped ... moreMonday morning. RETURNS We offer a money back return policy if you are unhappy with your purchase. Please notify us within 14 days of your intention to return and include the original packing slip in the package. Shipping charges are not refundable unless we have made a mistake in the listing. TESTING OF PRODUCTS We are unable to calibrate and test certain items at this location so some items may need re-calibration. PAYMENT TERMS We accept PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Boring Bars 3/8, 1/2, 5/8, 3/4 Z-544-3
You are bidding on Boring Bars Specifications 3/8" 1/2" 5/8" 3/4" HSS. Carbide Tipped Tool Bit Holder Good Usable Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that ... moreit is damaged, take pictures and notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or
|
|
|
1 pc used 1-1/4" steel boring bar S20-KTFPR-4 & inserts
Used in good condition. Plenty of life left in this tool. 14" O.A.L and no coolant thru. Uses TPG-4 series inserts and comes with 3 new inserts. Combined shipping.
|
|
|
MASTER TOOL INDEXBLE BORING HEAD 1 1/4" HSK-50 QTY 1
TRINITY SURPLUS Everything Sold With a 30 Day Money Back Guarantee(Quantity 1) MASTER TOOL INDEXABLE BORING HEAD HSK-50 SHANK 4 available Made by Master Tool. This is an Indexable Finish Bore Boring Head in Good condition. Specifications: Boring diameter: 1 1/4" Shank: HSK-50. 3 5/32" overall length. This LISTING is for any 1 shown in pictures. local pick up Free LOCATION 90016 Condition: Good condition. Used- Buy Now Price US $69 Payment must be received in full within 7 days of the closing sale date. Confirmed paypal addresses are required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared. The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. Shipping is available to all 50 ... morestates. Outer lying territories. Items will be shipped within 4 business days of receiving a cleared payment. Shipments will be carried via UPS or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 14 day period Returns are accepted within 30 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of receipt. The return policy doesn't cover negligence. Abuse, or misuse of items. Items sold on an as is are not eligible for return. Returned items will be repaired. Exchanged, or refunded as we see fit. The buyer is responsible for all return shipping costs. Shipping and handling costs are non-refundable. On Aug-26-10 at 02:08:22 PDT. Seller added the following information: GOOBUY MULTIPLE ITEMS GAIN MULTIPLE DISCOUNTS EMAIL OFFER JEREMIAH@TRINITYSURPLUS.COM OR CALL JEREMIAH 310 293 0615 LETS DEALD DEAL ON ENTIRE LOT CAL JEREMIAH 310 293 0615 On Oct-10-10 at 14:04:24 PDT. Seller added the following information: Please read handling and shipping descriptions before Checkout With ebay's new policies and ran
|
|
|
Criterion boring head Tool Holders - TA-750DTX (4 5/8") & TAS-750E (3 1/8")
DESCRIPTION- CRITERION BORING BAR TOOL HOLDERS TA-750DTX- 4 5/8 inches total length.750 diameter shank TAS-750E- 3 1/8 inches total length 1.000 diameter shank CONDITION- USED Good used condition SATISFACTION GUARANTEED! Free USPS shipping. Shipping within the United States only. Payment is expected to be paid by pay-pal unless other arrangements have been made prior to sale. If by chance there is a problem with your purchase. Please let me know before feedback is given so I can do everything I can to correct the problem. Multiple items will be combined for shipping. When purchasing multiple items please wait til actual combined costs are invoiced. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13eac9e55ad-0x105-
|
|
|
Ingersoll Drill-Max Indexable Carbide Boring Tool 3" Shank 4-1/2" Body
Welcome! Up for sale is an Ingersoll Drill-Max Indexable Carbide Boring Tool 3" Shank 4-1/2" Body. 3" shank. 4-1/2" OD body, takes 4 triangular carbide inserts. 26-1/4" OAL. Used in good condition. Feel free to email any questions! SCT2237
|
|
|
8" x 7/8" step down Boring Bar 1/4" Tooling
Item will accept 1/4 HSS bit or cemented carbide bit with set screw in end. Will bore 5/8"opening min. Slightly used some clamp marks. We only ship in the United States! No international orders. We ship within 1 business day of receiving cleared payment via USPS Priority with a Tracking Number! If there are any questions feel free to contact us through eBay Message. Thank you for looking and happy bidding!
|
|
|
Boring Head with 3/4" X 2" straight shaft... for 1/2" boring bars...
For sale is the unmarked straight-shaft. Boring head on the left in photo#2, and in the background of photo#3. Shaft Diameter: 3/4" X 2" with a small ground surface for set screws. Accepts 1/2" boring bars. This boring head is in excellent. But used condition. No manufacturer's name exists on the head, but it is a kissing cousin to my Model 43T by Flynn Boring Equip Co. see photos.
|
|
|
CARBOLOY INDEXABLE THREADING / BORING BAR W/ 1-3/4" SHANK & 3 INSERTS
aims CARBOLOY INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Carboloy. This is an Indexable Threading/ Boring Bar with 3 Inserts in good condition. Model# SI-MVLNL-28-3H Specifications: Current Bore Diameter: 2.125" Shank: 1-3/4" Overall Length: 9-1/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. ... moreReliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRW INDEXABLE BORING BAR W/ 1" SHANK & 4 INSERTS
aims TRW INDEXABLE BORING BAR W/ 1" SHANK& 4 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by TRW. This is an Indexable Boring Bar with 4 Inserts in good condition. Model# S-CTFPR-16-3 Specifications: Current Bore Diameter: 1.050" Shank: 1" Overall Length: 7-1/2" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection ... moreof products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TRW INDEXABLE BORING BAR W/ 1" SHANK& 4 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
MACHINIST TOOLS LATHE BORING BAR 11 X 1-1/4" 15 DEG NEGATIVE RAKE TRIANGLE
MACHINIST TOOLS LATHE BORING BAR 11 X 1-1/4" 15 DEG NEGATIVE RAKE TRIANGLE. As seen in pictures. Two tips. Ships USPS Priority at $11.35. NO RESERVE
|
|
|
FRAY USA BORING HEAD 3/4" STRAIGHT SHANK 1/2" BORING BAR Bridgeport Rockwell
This listing is for a Fray USA boring head. It has a 3/4" straight shank with 1/2"13thd. It holds a 1/2" bar. It is 3" in dia. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
DNMG 543 INDEXABLE CARBIDE INSERT LATHE 1 1/4" BORING BAR tool holder
god used carbide insert boring bar mfg not marked 1 1/4" dia x 14" long has slight edge wear holds CNMG/ CNMA/ CNMP 543 insert please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KDK STYLE QUICK CHANGE BORING BAR TOOL HOLDER - 1-3/4"
aims KDK STYLE QUICK CHANGE BORING BAR TOOL HOLDER- 1-3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a KDK Style Quick Change Boring Bar Tool Holder in good condition. Features: Rugged- No chatter or vibration. No time wasted with shims. Unlimited versatility. Safe and simple to operate. Speed your lathe operations up to 90% For fine precision work to heavy-duty cutting. Specifications: Capacity: 1-3/4" Overall Dimensions: 2-3/4" wide ... morex 4-5/8" long x 3-3/8" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KDK STYLE QUICK CHANGE BORING BAR TOOL HOLDER- 1-3/4" KDK STYLE QUICK CHANGE BORING BAR TOOL HOLDER- 1-3/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
CARBOLOY COOLANT FED INDEXABLE THREADING / BORING BAR W/ 1-3/4" SHANK & INSERTS
aims CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Carboloy. This is an Coolant Fed Indexable Threading/ Boring Bar with 3 Inserts in good condition. Model# SI-MVLNL-28-3H Specifications: Current Bore Diameter: 2.123" Shank: 1-3/4" Overall Length: 14-3/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give ... moreus a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS CARBOLOY COOLANT FED INDEXABLE THREADING/ BORING BAR W/ 1-3/4" SHANK& INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRW INDEXABLE THREADING / BORING BAR W/ 1-1/4" SHANK & 3 INSERTS
aims TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by TRW. This is an Indexable Threading/ Boring Bar with 3 Inserts in good condition. Model# S-CTFPR-20-3 Specifications: Current Bore Diameter: 1.370" Shank: 1-1/4" Overall Length: 14" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently ... morehas a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS TRW INDEXABLE THREADING/ BORING BAR W/ 1-1/4" SHANK& 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Mini Boring Threading Bar 1/4" Bit Holder Machinist Gunsmith Lathe Mill Tool Lot
Ebay Base This auction is for One internal threading. Grooving and boring bar in 1/2"x 5/8" shank. The business end of the bar is 5/8" diameter and holds 1/4" square shank lathe bits. This comes with 4 carbide tipped bits& Allen wrench. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
1-3/4" KENNAMETAL S28-DTFNR3 INDEXABLE BORING BAR
1-3/4" KENNAMETAL INDEXABLE BORING BAR PART NO. S28-DTFNR3 14" OVERALL LENGTH Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, or PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. STOCK#BB1214 Thanks for looking!
|
|
|
TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK
aims TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by TRW. This is a HSS Indexable Boring Bar in Good condition. Model# S-MCLNL-28-4 Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameter: 2" Approx. Shank: 1-3/4" Clamping System: Screw On. Overall Length: 8-1/2" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting ... moreour page for more Great Deals! Bidding starts at a dollar with no reserve. TRW HSS INDEXABLE BORING BAR W/ 1-3/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRW CARBIDE HSS INDEXABLE BORING BAR W/ 1-1/4" SHANK W/ INSERTS
aims TRW CARBIDE HSS INDEXABLE BORING BAR W/ 1-1/4" SHANK W/ INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by TRW. This is a HSS Indexable Boring Bar with inserts in good condition. Model# S-STHNL-20-4 Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameter: 1-1/2" Approx. Shank: 1-1/4" Clamping System: Screw On. Overall Length: 5-5/8" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions ... morein this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TRW CARBIDE HSS INDEXABLE BORING BAR W/ 1-1/4" SHANK W/ INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING
3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE 1-1/4" SHANK CNC LATHE CNC MILLING, 3" ADJUSTABLE BORING HEAD 3/4" TOOL BORE. 1-1/4" REMOVABLE SHANK. MFG USA. VERY GOOD CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
NMTB 40 TAPER BORING HEAD MICROBORE about "1.1/4 x 6"
min. hole 1.2 by"5.00 deep the insert holder is broken
|
|
|
4 MILLING MACHINE TABLE CLAMPS boring mill work holder tools 5/8 x 1 1/4 x 6
good used table clamps mfg not marked approx 5/8 x 1 1/4 x 6 with 1/2" slots will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
10 CNC BORING BAR SLEEVES / BUSHINGS 3/8" TO 1-1/4" I.D.
aims 10 CNC BORING BAR SLEEVES/ BUSHINGS 3/8" TO 1-1/4" I.D. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by CNC& other mfrs. These are 10 Boring Bar Sleeves/ Toolholder Bushings in good condition. CNC Boring Bar Sleeves are universally used to adapt all boring bar or shank type tools to any CNC turning machines and machining centers for extensions or hard-to-reach areas. Specifications: Inner Diameters: 3/8" 5/8" 3/4" 1" 1-1/4" Outer Diameters Range: 1 to 2" Overall Lengths: 5" to 9" Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other ... moreauctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 CNC BORING BAR SLEEVES/ BUSHINGS 3/8" TO 1-1/4" I.D. Reliable Tool Inc. c 2011 | Powered by
|
|