|
Amana Tool Carbide-Insert Rabbeting Shaper Cutter #61462 100mm x 1-1/4"
This listing is for an Amana carbide-insert rabbeting shaper cutter no. 61462. This tool is 3-7/8" in diameter and 4" from blade tip to blade tip. The bore measures 1-1/4" in diameter. RPM range is from 7.600 to 12,900. Our business. Psmsolutions2, is a sister company of psmsolutions and pleasantstmachinery. Both accounts have been in use for years with excellent seller ratings. Please refer to those accounts for a more accurate representation of our dedicated commitment to customer satisfaction. We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning ... morebidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact
|
|
|
Freeborn MC-50-045 6 Pc Cope & Pattern Carbide Tip Shaper Cutter 3/4" Bore
Here is a Freeborn Tool Company Carbide Tipped 6 Pc Shaper Cutter. The 4 Largest Cutters have a 2 7/8 Diameter and the 2 Smallest have 2 1/8" Diameter and have a 3/4" Bore. The 3 Cutter Blades on each have No Nicks or Scored Edges. They are Razor Sharp. This was Picked up at a Woodworkers Estate Sale along wit h another Set of Freeborn Cutters that I also Listed. LIST OF TERMS: All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. I do my best to describe items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. All sales are final. I will be more than happy to answer any questions to the best of my ability or send you more pictures ... moreof an item. I offer all items as is. In there found condition. I always leave cleaning and(repairs) if needed to the new owners. ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 3 DAYS FROM THE END OF THE LISTING. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED PAYPAL SHIPPING ADDRESS. NO DROP SHIPPING. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* INTERNATIONAL BIDDERS! YOU ARE LIABLE FOR ALL CUSTOMS TAXES AND PAPERWORK. BECAUSE THE UNITED STATES POST OFFICE DOES NOT OFFER COVERAGE FOR OVERSEAS 1st CLASS MAIL. SHIPPING ON LOST, DAMAGED OR STOLEN ITEMS SO IT WILL BE THE INTERNATIONAL BUYERS RESPONSIBILITY ON ANY AND ALL 1ST CLASS SHIPPING. INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges.
|
|
|
Bosch 87900 3/4" Arbor Door Lip Carbide Tipped Shaper Cutter 0269-40
Bosch 87900 3/4" Arbor Door Lip Carbide Tipped Shaper Cutter 0269-40-Model No. 87900-Made in Taiwan Specifications: 3/4" Arbor Hole-1/2" Bushing-Max. 13.000 RPM-Clockwise QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 201-497-6767 SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time ... moreframe and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes will be for street delivery. Due to the cost of fuel. Please ask for a freight quote. We do not mark up freight; we will add a handling cost to the quote. NJ Sales tax; Items delivered within the State of New Jersey are subject to a 7% sales tax. All shipments will ship to the confirmed address in the buyer's PayPal account. RETURN POLICY; Returns will not be accepted if the equipment is not in the same condition as when it was shipped to the buyer. Photo and condition of equipment will be noted on the bill of lading. Buyer is responsible for return shipping. DISCLAIME
|
|
|
Staggered Carbide Shaper/Molder Planer Cutter 1 1/4" Bore 4" Dia. 4 Wings
Staggered Carbide Shaper/Molder Planer Cutter 1 1/4" Bore 3" Tall About 4" Diameter 4 Wing Cutter Head Good Condition
|
|
|
Large Ogee Carbide Shaper Cutter 3 Wings 1 1/4" Bore
Large Ogee Carbide Shaper Cutter 1 1/4" Bore 1 3/4" tall Cutter about 5 1/2" in diameter. See other cutters and shaper I have listed.
|
|
|
Freud 1 1/4" Bull Nose Carbide Shaper Cutter 1 1/4" Bore
Freud 1 1/4" Bull Nose Carbide Shaper Cutter Cutter about 4" in diameter. Cutter is newly resharpened. See other cutters and shaper I have listed.
|
|
|
Freud Multi Profile Carbide Shaper Cutter No. 2283 1 1/4" Bore VGC
Freud Multi Profile Carbide Shaper Cutter No. 2283 Cutter about 4" in diameter. Shaper cutter used 3 or 4 times for small run of molding for a fire place mantel. Cutter in very good condition. See other cutters and shaper I have listed.
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 45-984 15 Degree Raised Panel Cutter
Delta Carbide Shaper Cutter No. 45-984 15 Degree Face Cut Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once for a panel. See other cutters and shaper I have listed. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13eef242fad-0x105-
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 43-094 Ogee Style Cabinet Set
Delta Carbide Shaper Cutter No. 43-094 Ogee Style Cabinet Set Shaper Cutter in original box with packing. Cutter set is used maybe 2 or 3 times. Small chip on one wing on top corner(see photo) Should not effect finish cut of molding. Should come out if resharpened. There is a lot of thick carbide on these Delta cutters. This cutter set was never sharpened. See other cutters and shaper I have listed.
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 43-057 V-90 degree
Delta Carbide Shaper Cutter No. 43-057 V-90 degree Shaper Cutter in original box with packing. Used cutter once. See other cutters and shaper I have listed.
|
|
|
Carbide Tongue and Groove Shaper Cutter( Freud)
Tongue and Groove Cutters Made by Freud 1 1/4" bore 3 1/4" diameter the Groove cutter has a small chip in it see picture and the tongue cutter looks fine questions please call Tom at 507-437-4753 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CTC Carbide Shaper Cutter
CTC Carbide shaper cutter 1 1/4" bore. 3 3/4" tip to tip, the v is 1 1/4" high needs to be sharpened has some slight nicks in the edge and the tip is chipped questions please call Tom at 507-437-4753 Customers in Minnesota will be charged Sale Tax Powered by The free listing tool. List your items fast and easy and manage your active items. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ef5c74af9-0xf3-
|
|
|
1 SHAPER CUTTER CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11T
1 SHAPER CUTTER CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11T Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 513 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 3 WING model with a 1" bore. Carbide is about.125 thick where I can measure it. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask ... morebefore you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 45-987 Raised Panel Cutter
Delta Carbide Shaper Cutter No. 45-987 Horizontal Panel Raising Shaper Cutter in original box with packing. I don't think cutter was ever used. See other cutters and shaper I have listed.
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 45-931 Raised Panel Cutter
Delta Carbide Shaper Cutter No. 45-931 Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once. See other cutters and shaper I have listed.
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 45-986 Raised Panel Cutter
Delta Carbide Shaper Cutter No. 45-986 Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once. Great condition. See other cutters and shaper I have listed.
|
|
|
Delta Carbide Shaper Cutter 1 1/4" Bore No. 43-045 Convex Style Cabinet Set
Delta Carbide Shaper Cutter No. 43-045 Convex Style Cabinet Set Shaper Cutter in original box with packing. Cutter set is used for one set of kitchen cabinet doors. Excellent Condition There is a lot of thick carbide on these Delta cutters. This cutter set was never sharpened. See other cutters and shaper I have listed.
|
|
|
Large Ogee Carbide Shaper / Molder Cutter 6 Wings 1 1/4" Bore
Large Ogee Carbide Shaper/ Molder Cutter 1 1/4" Bore Carbide 2" tall Cutter about 7" in diameter. Cutter has 6 carbide wings. Cutter was resharpened with wax coating. See other cutters and shaper I have listed. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f4cd13086-0xcb-
|
|
|
LRH Carbide Tipped Wood Shaper Cutter Tool for 1" Spindle Shaper.
Detail Shaper Cutter with 1" Bore. 4-1/8" diam x 1" H This is a very nice cutter Thanks for looking dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f6c2fb730-0xf4-
|
|
|
ROCKWELL DELTA 43-905 CARBIDE tipped SHAPER CUTTER 3/4 BORE 1/2" bush
To all prospective bidders. Please read the following description in its entirety and any previously answered questions before placing a bid. A Rockwell 43-905 carbide tipped shaper cutter with 3/4" hole and 1. 1/2" bushing, in very good used condition, two facets are chipped, basically in the same place, looks like a staple or something small was hit. P lease take time to look over the photos thoroughly. As they are as important as all these words I’m laying down.As I guarantee my items to be as pictured and or described. In addition. PLEASE ask questions before placing your bid. I will do my best to answer quickly, accurately and honestly. THE NOT SO FINE PRINT: I expect payment to be made within 48 hours of the auctions ending. Unless arrangements have been made prior to closing. I ship to PAYPAL CONFIRMED ADDRESSES ONLY; it ... morewill ship well packed in an appropriate box with insurance and tracking. A signature will be required at delivery. Winning bidder will have 3 days from receipt to inspect it and notify me of any issues; returns will be accepted only if the item is not as described or pictured. The bidder will be responsible for return shipping in the same manner and condition in which it was received and originally shipped. I will ship via USPS or UPS only. This item is being offered to US and Canadian bidders only. International Bidders Please Read Carefully* make sure you know your shipping cost before placing a bid. USPS Priority mail IS NOT an acceptable shipping method for this item outside the USA. Should you win the auction. Please do not ask me to mark as a gift with altered value, as any insurance claims would cover the declared value only, not to mention it is against eBay policy and against international trade laws. So please be prepared to pay customs and or duties on the full purchase amount. GOOD LUCK and HAPPY BIDDING
|
|
|
SHAPER CUTTER 1-1/4" HOLE - 3-1/2" DIAMETER, 3 blades, radius carbide
Here is a used shaper cutter with 3 radius carbide tips. The bore is 1-1/4" and the diameter is 3-1/2" No maker name on it. I'm offering several other cutters and will combine items for a lower shipping cost!
|
|
|
SHAPER CUTTER 1-1/4" HOLE - 3-3/4" DIAMETER, 3 blades, 1/2" round carbide
AS-IS! Here is a used shaper cutter with 3 carbide tips. One of them needs to be brazed/welded back on. The bore is 1-1/4" and the diameter is 3-3/4" No maker name on it. I'm offering several other cutters and will combine items for a lower shipping cost! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fd2e0a714-0xfe-
|
|
|
SHAPER CUTTER 1-1/4" HOLE - 3-1/2" DIAMETER, 3 blades, 1/2" flat carbide
Here is a used shaper cutter with 3 carbide tips 1/2" wide. The bore is 1-1/4" and the diameter is 3-1/2" No maker name on it. I'm offering several other cutters and will combine items for a lower shipping cost!
|
|
|
Wood shaper molder helix cutter, 1 1/4 bore, carbide
4" width. 3" height. All carbide intact and good dimension. Priority Mail. California buyer pays 9% tax.
|
|
|
FCT molder shaper cutter carbide tipped tenon adjustable turn dial 1-1/4" bore
Your tool will arrive ready for production or properly protected to store for that unique job. Expensive and hard to find. A practical cutter video is of similar style cutter Adjustable Tenon Cutter with Turn Dial Alternating Shear oellasawandtool.com Major Diameter 6-1/2" Kerf adjustable Tenon as deep as 1-1/2" 8 z x 2 Bore 1-1/4" carbide 1/8" Just sharpened few small storage blems 15 degree alternating shear balanced and verified Made in USA by FCT#2-200-5220 12 lbs Useful in other woodworking applications. Not actual cutter in video Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you ... moreintegrate this philosophy with the open box program, you get a customer for life! Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open b
|
|
|
Bosch 87959 3/4" QUARTER ROUND Carbide Tipped Shaper Cutter
Bosch 87959 3/4" QUARTER ROUND Carbide Tipped Shaper Cutter. It as some surface rust. Max RPM 13.000 1/4" Arbor hole with 1/2' bushing
|
|
|
Heavy Crown Shaper Cutter, Finest 4 wing solid body, 1 1/4" bore, carbide,
5 3/8" height X approx 5 7/8" width at base. These are the finest collectible/usable shaper cutters in the world! No longer available. No longer manufactured because of the costs of labor. Material, technology and machining involved. Now, the industry sells corrugated cutting heads with HSS knives. However, there is a trade off in this lesser technology. These are large diameter, large height dedicated Architectural profile production cutters. This/these shaper cutter(s) because of the overall mass and the mass behind the carbide cutting edges, give an unparalleled finish to the woods surface, less vibration, less wear and tear on machinery and material. Retail value is over $1,500.00! Moving to Brazil. Only selling because is cost prohibitive to ship all my machinery. Tooling, belongings, wood and furniture to Brazil. I have been ... morecollecting these cutters for nearly six years. Over the next Month. I will be selling my entire shaper cutter collection including 1 1/4" and 40mm bore cutters. All are new or freshly ground and unused.
|
|
|
Carbide Stile and Rail Door profile Shaper Cutter 3/4" Bore with 1/2 " Bushing
Carbide Stile and Rail Door profile Shaper Cutter 3/4" Bore with 1/2" Bushing included. In good condition
|
|
|
SY Carbide Raised Panel Shaper Cutter 3/4 Bore
Raised Panel Shaper Cutter 3/4" bore can be used with 1/2" bushing not included. In good condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1409d9d49af-0x108-
|
|
|
FREUD UC-900-211 PROFESSIONAL CARBIDE DOOR SYSTEM CUTTER SHAPER UC-211 CABINET
You're bidding on: FREUD UC-900-211 PROFESSIONAL CARBIDE DOOR SYSTEM CUTTER SHAPER UC-211 CABINET- This set is VERY LIGHTLY used in EXCELLENT CONDITION. Most of the cutters appear like new and unused. This kit includes everything shown in the pictures: Door Lip Cutter EC001 Reverse Glue Joint EC031 Raised Panel UC211 Stile& Rail EC260- All pictures are of the actual set you'll receive and show everything included. BASIC SPECS FROM THE MANUFACTURER: Cutter Type, Item# Overall Diameter Cut Depth Carbide Height Tenon Thickness Door Lip Cutter EC001 2-7/8" 29/64" 1-1/4" N/A Reverse Glue Joint EC031 2-7/8" 5/32" 1-17/64" N/A Raised Panel UC211 4-15/16" N/A 5/8" 15/64" Stile& Rail* EC260 2-7/16" 15/64" 1" 15/64" Tenon Length=7/16" An ideal professional grade cutter ... moresystem to make raised panel doors MicroGrain carbide tips allow for more cuts between sharpening Anti-kickback design Wood carrying case Limited lifetime warranty PRICES for EASE of COMPARISON: The MSRP for th is set i s $680.00 The LOWEST. Discounted Internet Price we found was $ 413.19 at routerbitworld.com NEED TO ASK A QUESTION? You can contact me by clicking the"Ask a Questions" link. Just down the page- just below the end of the description section SHIPPING: Buyer pays $1 8.70 shipping in the 48 states Shipping outside the 48 states buyer pays the actual shipping + $ 3. 2 0 for packaging We ship only to PayPal OK-To-Ship addresses. PAYMENT: Payment is due IMMEDIATELY for most BUY IT NOW! items and payment via PayPal must be received by us WITHIN 24 HOURS of the auction's end time. We accept payment via PayPal. PayPal is eBay's easy and safe way to pay for eBay items. Using PayPal you can pay by VISA. MasterCard, Discover Card, MOST AMEX Cards and PayPal account funds. We DO NOT ACCEPT payment by PayPal eCheck. If you're planning on paying by eCheck, please email BEFORE bidding and we may be able to work something out. ADDITIONAL TERMS: I reserve
|
|
|
Baseboard Shaper Cutter, Finest Steel 3 wing solid body, 1 1/4" bore, carbide,
The cutter was just sharpened and balanced and the wax protection is still on the carbide cutters. There is a lot of carbide left for many years of use and future resharpening.
|
|
|
1 SHAPER CUTTER HEAD CARBIDE 2 WING 1" bore MOLDER WOOD WORKING ROUTER b 11X
1 SHAPER CUTTER HEAD CARBIDE 2 WING 1" bore MOLDER WOOD WORKING ROUTER b 11X Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 2 WING model with a 1" bore. Carbide is about 3/8" thick. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included ... morein the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction.
|
|
|
4 sets SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER h 11X
4 sets SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER h 11X Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here are 4 used sets of Carbide SHAPER CUTTERS. Carbide is from 1/8" to 3/8" thick. They should be sharpened and that will take out some of the edge imperfections. These have been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. ... moreFree Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by ap
|
|
|
Freeborn Tool Co. Carbide Tipped Shaper / Cutter
Freeborn Tool Co. Carbide Tipped Shaper/ Cutter This auction is for a Freeborn Tool Co. Carbide Tipped Shaper/Cutter. Very good condition with very little wear. Has lots of life left. Includes plastic case. Click on a picture below for larger images. Customer Service Customer service is available Monday- Friday 8:30 AM- 4:30 PM Mountain Time Phone: 406) 839-2052 ext. 2 Fax(406) 252-1523 Payment Methods Accepted Our mailing address: FNP Outlet 1302 24th St. W#372 Billings. MT 59102 USA If you have any questions as to which payment methods we accept give us a call at: 406-839-2052 ext. 2 Policies Free Shipping Free shipping will be offered for Domestic shipping only. International shipments are NOT free and you will be required to pay for shipping. We deal in a wide variety of used merchandise. So. We are very frequently less knowledgeable ... moreabout the items that we are selling than our customers are. To help correctly identify the items in an auction, we will include a description of any markings on them that appear to be meaningful. We will describe any specific defects that we have found. We will provide the results of any research that we did into the item's value. The pictures in the auction are of the item(s) that will ship, so if the pictures provide more detail than we have in the auction title and description, then the pictures are correct. We will ship this item only within the United States and its territories. Any items marked"free shipping" being shipped to Alaska or Hawaii will accrue an extra surcharge depending on the weight and dimensions of the package. We will not ship this item to any other countries. We will use UPS ground for shipments to US states and to Puerto Rico. We will use the USPS for shipments to other territories and to FPO and APO boxes. The shipment will be insured against loss/damage for the amount of the winning bid. If a customs declaration is necessary(e.g. for territorial and FPO/APO boxes) The amount declared will be the amount of the winning bid. Please refrain fr
|
|
|
Freeborn Tool carbide tipped shaper cutter-corner rounding 3/4" bore, vintage
Carbide Tipped Shaper Cutter Corner Rounding 3/4" bore with 1/2" T-Bushings Freeborn Tool Co. Very good condition. Instructions included. Check out my other items! I am happy to combine shipping on any items. PLEASE NOTE: Most of the items I sell are from three generations of family heirlooms that we have no room for. While others belong to friends or relatives. I do my best to research the items and attempt to describe them accurately using photos and text. Also. I will clean off the surface dirt but I usually won't attempt to fix things that I'm not sure about fixing. Please keep in mind that most of what I sell is vintage and/or used and is not sold in‘new off the shelf’ condition. Though I do say when the items are brand new or in‘like new’ condition. International Buyers International buyers are responsible for custom ... morefees and may incur longer shipping times due to custom delays. Priority shipping is always an option; I cannot take responsibility for packages after they are in the possession of the USPS. Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-141784d84f0-0x102-
|
|
|
Grizzly Carbide Crown Moulding Shaper Cutter, C2204, USC2204
Very slightly used Grizzly No. C2204 carbide crown moulding shaper cutter. Moulds 3-1/2" crown moulding. Looks almost new. Original box. Industrial quality 3-wing cutter. Tipped with 3mm carbide. 1" Bore. 3 HP or more Spindle Shaper Recommended. Dimensions: Cutter Diameter: 3-1/2" Cutter Length: 3-1/2" Maximum RPM: 13.000 List price new from Grizzly is $299. Wood Werks Supply is a full service woodworking machinery and supply dealer. Please email us or phone 847-526-1411 for more information about this cutter. USA bidders only. Free shipping or local pick-up. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Shaper Cutter Carbide 3 wing 3/4 in bore Ogee Raised Panel
Ogee Face Cut Raised Panel shaper cutter CarbideHeight: 5/8" Large Diameter: 4-5/8" Bore: 3/4" Made in Taiwan originally $71.50. Have original box SY Industrial Carbide Tooling part number C2067. Very lightly used in very good condition.
|
|
|
Used Freeborn Groover Shaper Cutter Router Bit Carbide Tipped
Used Used Very Good Condition Freeborn Groover Shaper Cutter Head. 3-Blade Woodworking. Professional Router Bit 1-1/4" Bore. 3-1/8" Outer Diameter, 13mm Wide Carbide Tips Used Freeborn Groover Shaper Cutter Router Bit Carbide Tipped for sale here. Buyer will receive item as pictured Buy it Now from a trusted seller Thanks For Looking We combine shipping. Please visit our ebay store to make your purchase ABOUT US Our Company was established in 2005 with the goal of providing high quality and extremely affordable merchandise to you our customer. We sell in wholesale lots and individual retail items. We will buy. Sell or trade just about anything of value. With a 10,000 square foot facility to receive, market and ship products in a timely and professional manner, we hope you will find a very positive experience with us and return again ... moreand again for more great deals. PAYMENT We currently accept payment via PayPal. Payment should be made within 3 business days of the close of the auction. A confirmed address is required. RETURNS Unless stated that the product is being sold"As Is" in the listing. We accept returns within 14 days of reciept of your item. Any return shipping cost is the responsibility of the customer. Should you wish to return an item, please contact us, and we will issue you a Return Authorization number. INSURANCE Some items we sell that is of high value. Insurance is required and maybe included in the listing. Less expensive items, Insurance will be left up to the buyer as an option at checkout. PACKAGE TRACKING All packages are shipped via US Postal Service or UPS. When the label is printed. PayPal will send you an email with the delivery confirmation and/or tracking number. COMBINED SHIPPING We are happy to provide combined shipping on items purchased. The combined shipping cost is determined by the entire weight of the purchase. To ensure accuracy to this policy. Please wait for a combined invoice from us before completing checkout. note, the combined shipping has a 3 day time
|
|
|
LRH K-1486 Nose/Edge Carbide Shaper Cutter Molder 1-1/4" Bore U.S.A. Made
L.H.R. K-1486 Carbide Shaper Cutter Used condition. Small chip on one wing near corner. see photo) Nose/ Edge/ Radius Profile Cutter Made in the U.S.A. 1-1/4" Bore About 3 1/4" Diameter 2 3/8" Tall See all my other shaper cutters listed.
|
|
|
LRH K-1432 Molder Carbide-Tipped Quarter Round Concave Radius Shaper Cutter + EX
About Us: We hunt for and find the treasures you are looking for. We have been successful in providing a positive experience f or over 33 00 eBay members. Please be confident that your experience with us will be a positive one as well. Back Up Top LRH K-1432& 1407 Molder Shaper Cutters Details: Very Good Condition Signs of light use/wear Blades are still very sharp Model: K 1432& 1407 Original boxes are also included 3" in diameter. 1/2" thick, and has a 1/2" hole diameter The other two blades measure 2" in diameter. One is 1" tall, the other is 3/4" tall, and both have a 1/2" hole Everything Pictured is included Back Up Top
|
|
|
Shaper Moulder molder carbide wing cutter
Large45-degree 3-wing cutter. Very little use since being sharpened andbalanced. 5/32" thick carbide. 1-1/4" bore, 2-3/4" High,appx. 8.25 diameter cutting circle. Weighs 9.5 lbs.
|
|
|
*GRIZZLY*Carbide Tipped*SHAPER CUTTER Blade*G1585*Raised Panel*BOX*Hand Tool*NR
GRIZZLY*Carbide Tipped*SHAPER CUTTER Blade*G1585*Raised Panel*BOX*Hand Tool*NR click to Enlarge click to Enlarge click to Enlarge Description: This is in Good Usable Condition with Original Box. If you have any questions. Feel free to e mail me. Thanks. Paying with a Check or MO is APPRECIATED, But must be approved PRIOR to Bidding! Shipping: Shipping amounts are estimated. Actual rates may be lower, but never higher! SHIPPING CHARGES(Priority, First Class Mail, Media Mail[if applicable] ONLY) TO BE DETERMINED AT END OF AUCTION, DUE TO WEIGHT/LOCATION VARIANCE& SHIPPING of items will ONLY be first thing on Wednesday a.m. Saturday a.m. From 01089) WE CAN ALMOST ALWAYS COMBINE SHIPPING ON MULTIPLE WINS WITHIN A FEW DAYS OF EACH OTHER, EXCEPT on'Free Shipping' Items! If Returns/Refunds Become Necessary, Shipping IS NOT Included! ... morePayment: ATTN: Many of my Auctions are on consignment for others. Therefore Smoke-Free cannot be guaranteed! Re: FEEDBACK-Feedback will be returned after the winner is satisfied& has already left it-Sorry, but this is how it must be! I am not able to accept Credit/Debit Cards directly! ALSO-Questions asked within the last 12 hours of an Auction may not be answered! OFFERS ALWAYS CONSIDERED! inkfrog terapeak. I000000.
|
|
|
Magic Molder Detail Patterns P-3 by LRH Table Saw & Shaper Cutter Carbide Tip
Magic Molder Detail Patterns P-3 by LRH Table Saw& Shaper Cutter Carbide Tip Product Description Now. You can teach an old saw new tricks! The Magic Molder converts your table saw into a molder! Merely remove the existing saw blade and install the Magic Molder in its place to produce molding on your saw. The molder head is available in 5/8 inch bore and will work on a left or right tilt table saw. With no minimum horse power requirement, the Magic Molder will work on any table saw that can accommodate a Dado set. The Magic Molder is a patented product of LRH Enterprises, Inc. and is the only carbide tipped molder head for saws which allows the molding of natural woods and composite materials such as MDF, HDF, Solid Surface, etc. It is a 7 inch diameter head, anti-kickback, chip-limiter design to produce a safer and quieter tool. LRH offers ... more83 different interchangeable profile plugs along with the ability to supply you with custom-made plugs. Convex V-point Detail Pattern Carbide Tipped with an Anti-kick Back Design Self aligning set screws Patented superior locking system
|
|
|
*GRIZZLY*Model G1586*SHAPER CUTTER Bit*Box*CARBIDE TIPPED*Cutting*Shaping*TOOL*
GRIZZLY*Model G1586*SHAPER CUTTER Bit*Box*CARBIDE TIPPED*Cutting*Shaping*TOOL* Click to Enlarge Click to Enlarge Click to Enlarge Description: Box has Model G1586 Grizzly. Carbide Tipped, SHAPER CUTTER. Box has some Scratches and Styrofoam Packing is Torn/Stained, but Tool is Good. Thanks. Paying with a Check or MO is APPRECIATED, But must be approved PRIOR to Bidding! Shipping: Shipping amounts are estimated. Actual rates may be lower, but never higher! SHIPPING CHARGES(Priority, First Class Mail, Media Mail[if applicable] ONLY) TO BE DETERMINED AT END OF AUCTION, DUE TO WEIGHT/LOCATION VARIANCE& SHIPPING of items will ONLY be first thing on Wednesday a.m. Saturday a.m. From 01089) WE CAN ALMOST ALWAYS COMBINE SHIPPING ON MULTIPLE WINS WITHIN A FEW DAYS OF EACH OTHER, EXCEPT on'Free Shipping' Items! If Returns/Refunds Become ... moreNecessary, Shipping IS NOT Included! Payment: ATTN: Many of my Auctions are on consignment for others. Therefore Smoke-Free cannot be guaranteed! Re: FEEDBACK-Feedback will be returned after the winner is satisfied& has already left it-Sorry, but this is how it must be! I am not able to accept Credit/Debit Cards directly! ALSO-Questions asked within the last 12 hours of an Auction may not be answered! OFFERS ALWAYS CONSIDERED! inkfrog terapeak. I000000.
|
|
|
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here are 3 used sets of Carbide SHAPER CUTTERS. The shaft holes are 1/2" and 1" They should be sharpened and that will take out some of the edge imperfections. These have been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for ... morebest view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Payp
|
|
|
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 3 WING model with a 1" bore. Carbide is about.125 thick where I can measure it. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which ... moreis included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close
|
|
|
Carbide Raised Panel Shaper Cutter 5/8" PC 15-006
selling a Raised Panel Shaper Cutter( 5/8" material)use with a back cutter to cut 3/4" material. Freeborn Tool Company model number PC-15-006. Retails new at $304.00 plus shipping and handling. Tool is like new. Used only one time. Selling tools since we are consolidating the business.
|
|
|
LRH K-1427 Concave 5/8" Radius Carbide Shaper Cutter Molder
LRH K-1427 Concave Carbide Shaper Cutter Molder 5/8" Deep Radius. 1 1/2" Radius Opening. 2" OA Opening Width 1 1/4" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund.
|
|
|
LRH K-1428 Concave 3/4" Radius Carbide Shaper Cutter Molder
LRH K-1428 Concave Carbide Shaper Cutter Molder 3/4" Deep Radius. 1 1/2" Radius Opening, 2 1/4" OA Opening Width 1 1/4" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14432b00509-0x105-
|
|
|
LRH K-1165 45 Deg Angle Bevel Carbide Shaper Cutter Molder
LRH K-1165 45 Deg Angle Bevel Carbide Shaper Cutter Molder 45 Degree Bevel. 1 3/8" Opening Width 1" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1445009ac3d-0x11a-
|
|
|
LRH K-1165 45 Degree Angle Bevel Carbide Shaper Cutter Molder
LRH K-1165 45 Degree Angle Bevel Carbide Shaper Cutter Molder 45 Degree Bevel. 1 3/8" Opening Width 1" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund.
|
|
|
1 1/4" ARBOR CARBIDE SHAPER CUTTER ESTATE FIND FOUR 2" ANGLED BLADES LOOK
1 1/4" ARBOR CARBIDE SHAPER CUTTER ESTATE FIND FOUR 2" ANGLED BLADES LOOK Description: 1 1/4" ARBOR CARBIDE SHAPER CUTTER ESTATE FIND FOUR 2" ANGLED BLADES LOOK SEE PICTURES FOR MORE DETAILS IF YOU LIKE WHAT YOU SEE I HAVE TONS OF SHAPER CUTTERS THAT CAME FROM AN ESTATE MOST ALL ARE CARBIDE WITH 1 1/4" ARBOR BUT THERE ARE OTHER SIZE ARBORS ALSO MOULDING CUTTERS SIDE CUTTERS KNIVES ABOUT TWO HUNDRED POUNDS WORTH SEE PICTURES FOR MORE DETAILS MESSAGE ME ILL SEND YOU MORE PICTURES Payment: 1. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF END OF AUCTION. ANY WINNING BIDDER FAILING TO PAY WILL BE REPORTED TO EBAY. BIDDERS WITH-1 FEEDBACK OR LOWER WILL BE BLOCKED FROM BIDDING. 2. PAYPAL IS NOW THE ONLY METHOD OF ACCEPTED PAYMENT. Shipping: 1. ITEMS UNDER 1 LB USUALLY SHIP VIA USPS PRIORITY MAIL. OVER 1 LB TYPICALLY SHIPPED ... moreVIA FEDEX GROUND. PLEASE ALLOW 3-7 DAYS FROM WHEN YOUR ITEM IS SHIPPED FOR YOUR ITEM TO ARRIVE BEFORE CONTACTING US. 2. TRACKING INFORMATION: TRACKING INFORMATION IS SENT AUTOMATICALLY ONCE YOUR SHIPMENT IS PROCESSED TO YOUR PAYPAL ASSOCIATED E-MAIL ADDRESS. WE RECEIVE NUMEROUS REQUESTS FROM BUYERS THAT THEY DID NOT RECEIVE TRACKING INFORMATION. THIS IS DUE TO EITHER YOUR PAYPAL E-MAIL NOT BEING UP TO DATE OR YOUR E-MAIL SERVICE DIVERTING THIS MESSAGE INTO YOUR JUNK FOLDER. PLEASE MAKE SURE THAT YOUR PAYPAL E-MAIL IS UP TO DATE AND CHECK YOUR JUNK FOLDER BEFORE CONTACTING US FOR TRACKING INFORMATION. 3. WE SHIP TO THE U.S. AND CANADA. AND ARE OPEN TO SHIPPING INTERNATIONALLY. SHIPPING TO ALASKA, HAWAII, CANADA, OR INTERNATIONALLY WILL BEAR AN ADDITIONAL CHARGE. IF YOU PLAN ON BIDDING AND ARE LOCATED OUTSIDE OF THE CONTINENTAL U.S. YOU MUST CONTACT US FIRST FOR A QUOTE WITH YOUR ZIP CODE BEFORE BIDDING. IF YOU ARE THE WINNING BIDDER AND FAIL TO CONTACT, YOU WILL BE CHARGED A?REASONABLE? CHARGE TO COVER THE EXTRA COSTS OF SHIPPING TO YOUR LOCATION. IF YOU REFUSE TO PAY THE TOTAL SHIPPING AMOUNT YOU WILL BE SUBJECT TO OUR PAYMENT POLICY(SEE ABOVE) ITEMS SHIPPED WITHIN CALIFORNIA ARE
|
|
|
Leitz shaper cutter carbide made in Germany
1 1/4 Leitz brand made in Germany. Carbide tipped. Used looks like in good shape. Numbers are K9 1.25" shaft 1152 BG-Test ZU-3138 36. I know nothing about this item but will try to answer questions. Slight rust from sitting.
|
|
|
DELTA LEITZ TOOL SHAPER CARBIDE CUTTER SET 42-115 6 Pc. COPE & PATTERN Italy
Delta Letiz 42-115 Cope& Pattern Carbide Tipped We Used This Set for Custom Cabinet Doors Traditional Quarter Round With Detail Nice Fitting Cutters Versatile and easy to use. Consists of 6 Cutters to Perform Traditional Quarter Round Design Counterclockwise rotation with wood fed face down. Delta Letiz Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. The time-tested. Orange-colored Freeborn cutter offers a geometrically Precise design that provides long life and Unmatched results in a variety of applications. Excellent Used Condition Good Cutters ~ No Nicks ~ No Flakes Sharp& Ready to Go! Check Images as They are Part of the Description Check Out Our Other Tools! ... moreThanks for Looking Good Luck
|
|
|
COPE & PATTERN FREEBORN TOOL SHAPER CARBIDE CUTTER SET MC-50-550 6 Pc. Flat USA
Freeborn MC-68-020 Lock Mitre Single Tongue& Groove Lock Mitre Mini-Pro Carbide Tipped We Used This Set for Custom Beam Wraps Up in Aspen ~ Clicked them Together Hand Planed the Edges ~ Couldn't Tell the Difference the Wraps& Solid Beams Versatile and easy to use. Consists of 3 Cutters to Perform Single Tongue& Groove Lock Mitre Counterclockwise rotation with wood fed face down. Mini-Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. The time-tested. Orange-colored Freeborn cutter offers a geometrically Precise design that provides long life and Unmatched results in a variety of applications. Very Good Used Condition Good Cutters ~ The Groover has Small ... moreNick Does Not Leave a Trailer! Sharp& Ready to Go! Check Images as They are Part of the Description Check Out Our Other Tools! Thanks for Looking Good Luck
|
|
|
FREEBORN TOOL SHAPER CARBIDE CUTTER SET MC-59-020 6 Pc. Paneling Flooring USA
Freeborn MC-59-020 Flooring Set Mini-Pro Carbide Tipped We Used This Set for Custom Paneling Cuts 5 Different Patterns We Also Would Used a Bead Cutter On the Straight T&G- For the Beaded Paneling Versatile and easy to use. Consists of 6 cutters to perform single V Expanded single V Straight tongue& groove Radius V& Expanded Radius V Cut provides a loose fit for Wood expansion& Ease of Installation Mini-Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Counterclockwise rotation with wood fed face down Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. The time-tested. Orange-colored Freeborn cutter offers a geometrically Precise design that provides long life and Unmatched results in a variety of applications. ... moreExcellent Used Condition Good Cutters ~ No Nicks No Flakes Sharp& Ready to Go! Check Images as They are Part of the Description Check Out Our Other Tools! Thanks for Looking Good Luck
|
|
|
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove
Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Freeborn Carbide Shaper Cutter: 3/4" Bore 2-15/16" Dia 1/4" Groove Mini-Pro Line Carbide Tipped Shaper Cutter 3/4" Bore 2-15/16" Diameter 1/4" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers ... moreto opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"electronic proof of signature delivery" acceptable to
|
|
|
Freeborn Cope & Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove
Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Freeborn Cope& Pattern 6pc Carbide Shaper Cutter Set: 1/4 x 5/8" Tongue/Groove Originally an 8pc MC-51-010 set. Now missing the 1/4" center cutters. 3/4" Bore Carbide Tipped Double-Sided Cope& Pattern Cutter Set Built to cut 1-3/4" passage doors. Cuts 1/2" x 5/8" deep tongue and groove. Use 1-11/16" rub bearings(not included) to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent ... moreservices performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible for delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be pr
|
|
|
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove
Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Freeborn 2pc Carbide Shaper Cutter: 3/4" Bore 1-11/16" Dia 1/4" and 1/2" Groove Two(2) Mini-Pro Line Carbide Tipped Shaper Cutters 3/4" Bore 1-11/16" Diameter 1/4" and 1/2" Kerf to see our other Freeborn Carbide Shaper Cutters. We'll combine shipping! Condition: Used. Excellent Condition. No bearings included. Please email with any questions before placing your bid. 100% Guaranteed to be as described. Buyer must arrange for return of the item within 3 days of receipt. Item must be returned in the same condition received. Shipping and Handling charges represent services performed or amounts paid to others in good faith and are NOT refundable. SHIPPING INSURANCE: Because PayPal make sellers responsible ... morefor delivery and eBay has removed the option for Buyers to opt out of insurance. All our S&H charges now include Shipping Insurance based on the estimated value of the item. Note: UPS rates include insurance to $100 value at no additional cost) SHIPPING ADDRESS: If you use PayPal. We will ONLY ship to the address supplied with your payment. If you need an alternate address please add it to your PayPal account BEFORE making your payment. If you update your eBay Profile to include your telephone number, we will include that for UPS and International Shipments to help the shipper quickly resolve any delivery exceptions. DOMESTIC: Net Sells It uses both UPS and USPS. We may. At our discretion, choose a different carrier if we believe it offers better service. INTERNATIONAL SHIPPING: WHEN AVAILABLE) 1) Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 2) International PayPal transactions are ONLY shipped with USPS Express International because it provides the"
|
|
|
DELTA LEITZ TOOL SHAPER CARBIDE CUTTER SET 42-115 6 Pc. COPE & PATTERN Germany
Delta Leitz 42-115 Cope& Pattern Carbide Tipped"Good tools are the starting point for successfully transforming ideas into reality. Delta Partnered with The Leitz Group Leading World-Wide Manufacturer of Machine Tools for Processing Wood and Advanced Materials. We Used This Set for Custom Cabin et Doors Traditional Quarter Round With Detail Nice Fitting Cutters Versatile and easy to use. Consists of 6 Cutters to Perform Traditional Quarter Round Design Counterclockwise rotation with wood fed face down. Delta Leitz Pro 3 Wing 2-15/16" Minor Diameter 3/4" Bore Carbide Tipped Carbide tipped cutter is still unsurpassed While working with man-made materials Such as particle board. Plywood and fiberboard, As well as natural wood. Excellent Used Condition Good Cutters ~ No Nicks ~ No Flakes Sharp& Ready to Go! Check Images ... moreas They are Part of the Description Check Out Our Other Tools! Thanks for Looking Good Luck.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14544caf27f-0x112-
|
|
|
Grizzly #C2049 Carbide Shaper Cutter - 3/4" Flute, 3/4" Bore
This cutter has been used quite a bit. But still cuts. Some sanding may be required. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1459b045f5b-0x10f-
|
|
|
Grizzly C2095 Carbide Shaper Cutter - Triple Bead, 3/4" Bore
Near perfect condition- used once. On a very small project. Size: 2-5/8" dia. x 1" cutting face width)
|
|
|
Grizzly #C2301 Carbide Shaper Cutter - "Glass Door Cutter", 3/4" Bore
Sold as a cutter for rabbeting out the back of cabinet doors for glass panels. But I used it for milling the balusters for my own stairs(see photo) This is the only project I used it on. Can also be used as a vertical jointer if the input and output fences on the shaper are adjusted accordingly. Size: 2-7/8" dia. x 1-1/4" cutting surface width)
|
|
|
Grizzly #C2112 Carbide Shaper Cutter - Astragal, 3/4" Bore
Used only once. On a small project.
|
|
|
Grizzly Carbide tipped SHAPER CUTTER Model G1120 Sash
$3.00 shipping cost in USA only. You are bidding on a Grizzly Carbide tipped SHAPER CUTTER Model G1120 Sash. Used but no damage that I can see. Can be picked up. Do not bid if you do not know what you are buying. Picture tells the story. Any questions please email WELL in advance. Will combine ship if they fit in same flat rate box. $3.00 shipping cost in USA only. Email for payment options.
|
|
|
FREUD CARBIDE SHAPER CUTTER UP129 5-1/8" X 1-1/4"
Freud carbide shaper cutter in great shape. UP129 5-1/8" x 1-1/4" 10.000 RPM has 4mm carbide left with no chips. Free shipping. Please check out my other auctions. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-146b18ac2d9-0x10b-
|
|
|
Lot 101 SHAPER CUTTER CARBIDE 3 WING 1 1/8" Bore Moulder Cnc Router
Steel cutter head. See photo for details. Could be bored and or bushed to use with other spindle sizes. Will combine shipping. All measurements are approximate except for bore size. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-146b992ebaf-0x10e-
|
|
|
LRH KING J-1365-1 CARBIDE TIPPED SHAPER PANEL CUTTER Ogee DETAIL 1" BORE USA
Quality LHR King Shaper Cutter Ogee J-1365-1 Panel Cutter Large Three Wing Cutter Carbide Tipped Diameter(D) 7-3/4" 1" Bore ~ Fits 1" to 3/4" Spindles Spun Balanced and Verified Anti Kickback Design Geometrically Perfect Useful in Other Woodworking Applications Made in the USA Very Good Plus Used Condition We Made Cabinet& Interior Doors With This Cutter ~ We Did a Couple of Trophy Homes Up in Aspen for this Exceptional Interior Designer and She Would Say"Stan. Size Does Matter- The Bigger the Better" Thanks for Looking!
|
|
|
LRH KING K-1044-3/4 CARBIDE TIPPED SHAPER PANEL CUTTER Classic DETAIL 3/4" BORE
Quality LHR King Shaper Cutter Classic K-1044 Panel Cutter Three Wing Cutter Carbide Tipped Diameter(D) 4-3/4" 3/4" Bore ~ Fits 3/4" to 1/2" Spindles Spun Balanced and Verified Anti Kickback Design Geometrically Perfect Useful in Other Woodworking Applications Made in the USA Outstanding Used Condition We Made Some Sample Doors With This Cutter ~ Was on the Machine Just a Couple of Times Thanks for Looking!
|
|
|
LRH K-1101 shaper cutter molder carbide tipped 7/64" radius detail cutter 1-1/4"
Used for one short run.like new
|
|
|
Delta 43-059 3/4" Quarter Round Carbide Tip Shaper Cutter w/ 1" Bushing
Delta Cat. No. 43-059 3/4" Quarter Round Carbide Tipped Shaper Cutter 1 1/4" Hole with 1" Bushing This is in Good Condition. Used mostly on Poplar& Maple Winning bidder: Payment must be made with Paypal within 4 days of the close of the auction. If payment isn’t received within 4 days. A Non-Paying Bidder alert will automatically be filed. Please note that we will only ship the address that shows on the PayPal payment- please make sure the shipping address entered on the order matches the address on the PayPal payment. Your order WILL be placed on hold and will not ship until the shipping address matches the address on the PayPal Transaction Page. No International bidders.
|
|
|
Freeborn CARBIDE Cope & Pattern Shaper Cutter Set MC 50 040 FREE PRIORITY S/H
CARBIDE Freeborn Tool Very good condition. They have been used. But Appears to have very limited use. Still sharp. Items have been cleaned and inspected. 3/4" Bore, 3 Wing Cutter, 2-15/16" Overall Diameter, Runs with 2-3/16" Diameter Rub Bearing, 6 Piece Cutter set, Cuts 1/4" Thick x 3/8" Deep Tongue, Requires no fence adjustment when changing from cope to pattern cuts, Counterclockwise rotation with wood fed face down,
|
|
|
Grizzly G1565 Carbide Tipped Shaper Cutter Woodworking Bit
Grizzly G1565 Carbide Tipped Shaper Cutter Woodworking Bit FOR SALE: Grizzly G1565 Carbide Tipped Shaper Cutter Woodworking Bit CONDITION: Very Good Used Condition Item has light general wear on it from use and storage. There is some sawdust gathered in spots. One of the arms has surface rust discoloration. Brand: Grizzly Model: G1565 Blade height: 1/2" tip) 21/32" center) Inner circle diameter: 1-1/4" Center to outer tip: 2-9/32" 192MP0722 Normal 0 false false false EN-US X-NONE X-NONE For faster processing. Use the"Pay with Credit Card" selection during checkout or call us toll-free at 1-877-237-5248 Auctions include only what is pictured. If it is not pictured or listed. It is NOT included. Rebay Reseller is a resale and pawn shop in Boulder. Colorado and we do not claim to be experts in any one field nor ... moredo we know an item's history unless noted in the auction. All electronics are fully tested and working properly unless otherwise noted AS-IS. There is no return on AS-IS items. Rebay Aesthetic/Physical Condition Definitions: New: Brand New. In perfect condition. Mint: Like New condition. Pre-owned Near Mint: Almost mint. Free from any scratches, scuffs, or blemishes. Excellent: Pre-Owned. Minimal signs of wear from normal usage. Very Good: Pre-Owned and may have noticeable scratches. Scuffs, or blemishes. Good: Pre-Owned and may have major marks. Blemishes or scratches. Payment must be received within 6 days of the close of auction(unpaid item case will be opened after 2 days. But closes automatically once paid) Local pickup is always available and always FREE! See our Boulder. CO store hours below or contact us for details. Colorado addresses are required to pay our current local sales tax of 8.16% at the time of checkout. Our standard US shipping service is Ground(insured) for large items. And USPS Priority Mail/First Class Mail for smaller items. All listed Flat Rate shipping charges are only available to the 48 contiguous states. HI/ AK/ APO addresses: Contact us prior to
|
|
|
Shaper Cutter Head- Set of 3-Carbide 11738-B/750 GD (item 2)
Three Shaper cutter heads used in cabinet making. Carbide tips.75 bore hole(Item#2 for my reference only)
|
|
|
SET Shaper Cutter : Door Edge & Raised Panel Tungsten Carbide FREE SHIPPING
Cutter are in GREAT Condition and are made of Tungsten Carbide Both are made by Nu-Tec Tooling in Watsontown. PA 3/4" bore Raised Panel for 3/4" stock. Door Edge is also 3/4" bore. And for 3/4-7/8 stock. WE ALWAYS SHIP NEXT WORK DAY AFTER PAYMENT. MONDAY- FRIDAY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-148498dc609-0x115-
|
|
|
STARK CARBIDE BLADE REBATING SHAPER CUTTER HEAD - 2" HIGH, 4" DIAMETER
1 3/8" bore. Reversible blades. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
L.R.H. 2 WING CARBIDE TIPPED 1/2" BEAD SHAPER CUTTER - 5" DIAMETER, 1 3/8" BORE
I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
L.R.H. 3 WING CARBIDE TIPPED 45 DEGREE ANGLED SHAPER CUTTER - 3/4" HIGH DETAIL
4 1/4" diameter. 1 3/8" bore. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
STARK 4 WING CARBIDE TIPPED 1/2" FLUTE SHAPER CUTTER - 4 3/4" DIAMETER
1 3/8" bore. I will gladly ship multiple items together as long as it is safe to do so. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148e0669ece-0x10a-
|
|
|
L.R.H. 3 WING CARBIDE PANEL RAISING SHAPER CUTTER - 3/4" HIGH DETAIL
6" diameter. 3/4" bore. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
shaper cutter molder spindle 1 1/8" bore carbide tipped 1/4 round profile
3 wing cutter 1 1/8" possibly 28mm bore 4 across 1 1/2" high quarter round profile carbide tipped photos are actual item 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-1490d991ab0-0x112-
|
|
|
AMANA TOOL CARBIDE-TIPPED SHAPER CUTTER SET EXC.
IN EXC. CONDITION. 3/4" STOCK. SC550. SET MAY HAVE MINOR PIECES(BUSHINGS OR SPACERS) MISSING. MY DAD PASSED AWAY AND WE DO NOT KNOW MUCH ABOUT MAKING TRIM. ETC.
|
|
|
STARK 4 WING CARBIDE TIPPED TABLE EDGE DETAIL SHAPER CUTTER - 1 1/16" HIGH
1 1/16" high edge detail. 4 1/2" diameter, 35 mm bore. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
Carbide Raised Panel Shaper Cutter Dual Wing (Pair)
Came from my one man shop. Used very little. Very good older carbide. The pictures should give you an idea but any questions please E-mail. Have some others listed as well. Thanks.
|
|
|
Carbide Tip Shaper Cutter, 1/2" flute, 1 1/4" bore
Good used carbide tipped blade with little wear. No chips, approximately 3/16 carbide left on blade. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149a1136038-0x106-
|
|