|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. The mounting ... moreholes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy Can Use Any Size 5C Collet..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Listing Description: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. ... moreThe mounting holes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy .
Buy It Now
$70.00 Shipping Condition: New Location: China It is mainly used for teaching, hobbies and other DIY works. Machine Material Carbon steel, Aluminum, ABS. Process material Soft-aluminum, brass, copper, ... morewood, plastics ect. The handwheel with accuracy of 0.02 mm scale line, increase the accuracy of the machine tool machining.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
$18.20 Shipping Condition: Used Location: Jacksonville, United States Vintage Machinist Lathe Holding toolManufacture Unknown NOTE -Tool does have some movement but for the most part is rusted and locked up and will need ... morefreed up!Also the one hand crank is very rusted and partially rusted awaySold as is you see in photos with no returns and or no garuntees , ask questions before purchase and use photos as description THANKS ROYCheck out my other items!Be sure to add me to your favorites list!
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a 6" tool rest for the mini lathes. The post is 5/8" x 3-1/2" and a total height of 5 1/4" The tool rest edge is fully machined ... moreso it is straight and flat. Shipping on this item is free via USPS or UPS. I do ship internationally. Just email me your location and I will quote shipping to your country. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e0fe04e8f-0xf6-
Buy It Now
Free Shipping Condition: Used Location: Pasadena, United States Shopsmith 3 3/4” Lathe Faceplate that is still in the box never used. The item# is 505590.
Buy It Now
$8.00 Shipping Condition: Used Location: Altadena, United States VERITAS Tool-Setting Depth Gauge 1/8" to 1-7/8" wood working lathe machine. Nice condition.
Buy It Now
$8.00 Shipping Condition: Used Location: Kissimmee, United States We have other faceplates as well as turning tools.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe. Note:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
Free Shipping Condition: New Location: China Can work with hand, convinient woodworking tool. Perfect Wood Turning Performance. 1 x Wood turning tool with wood handle. Hardness of Blade: 90HRC. Color ... moreof Blade: Gold. 1 x Wrench. 3# Square round 15mm.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States May not be complete. No APO's or FPO's. Listed 994.
Buy It Now
Free Shipping Condition: New Location: China 1" 2" 3" Sanding Disc Holder Roloc Roll & Lock Rotary Pad Holder 1/4" Shank. 2" Crimped Wire Wheel Brush Stainless Steel with 1/4" Shank Die Grinder or ... moreDrill. 115mm Nylon Fiber Flap Polishing Wheel Disc Buffing Pad For Grinder 120-320 Grit.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point ... moreto enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Description: Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Note:.
Buy It Now
Free Shipping Condition: Used Location: Pasadena, United States Shopsmith Mark V 3 3/4" Lathe Faceplate. Free Shipping! This item is in go od used shape. These run almost $25 from t he factory. Please check out ... moremy other auctions. I f you win 2 auctions. I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding!
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. Suitable for: High speed lathe and CNC lathe Features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point to enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Color:Silver .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC ... morepoint to enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Package Includes: 1 × Live Center.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Quick-release and self-locking, screw adjustable ... morelocks with trigger release to save labor. The Locking Pliers Set is mainly used for riveting, welding, grinding and other processing of clamping parts. Ideal for gripping, twisting, holding small components. Features:.
Buy It Now
$14.00 Shipping Condition: Used Location: Jacksonville, United States Vintage Lathe Holding toolManufacture Unknown NOTE -Tool is rusted and locked up and will need freed up!Sold as is you see in photos with no returns and ... moreor no garuntees , ask questions before purchase and use photos as description THANKS ROYCheck out my other items!Be sure to add me to your favorites list!
Buy It Now
$25.00 Shipping Condition: Used Location: Jacksonville, United States Vintage Lathe Holding toolManufacture Unknown NOTE -Tool is rusted and locked up and will need freed up!Also , look at photos carefully , there seems ... moreto be some damage near spindle point as if it’s been ground away?Sold as is you see in photos with no returns and or no garuntees , ask questions before purchase and use photos as description THANKS ROYCheck out my other items!Be sure to add me to your favorites list!
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Specifications: Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States Item: TCT Reversible Planer Knives Cutter Inserts Blade. Fit For：Wood Working Popular Spiral Helical Planer Cutter Head and DIY Wood Lathe Turning Tools. ... moreStandard Size: 15mm(length)X15mm(width)X2.5mm(thickness) square straight with 4 edges,30 degree cutting angle.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Material: high-grade heat-treated steel, hole body nickel plating. Size: 10pcs, Total length:11''；Overall Length 11 inch; Open Jaw to 4 inch ... morewide. Working Efficiently: C-clamp kit with precise adjustable lock and trigger release device with turn Screw to adjust pressure; easily Locks and unlocks, one-handed grip and release action. Firm Clamp: The rotary jaw pivot is designed to fit the workpiece more firmly. Application: This Wide-Open Clamp mainly use for clamping and vise of Variety of shapes. Specification: Total length: 11'' Overall Length: 11 inch Open Jaw to wide: 4 inch Condition: New Color: Nickel .
Buy It Now
$3.96 Shipping Condition: Brand New Location: China 75mm 3" Type R Sanding Disc Roll Lock Abrasive Grinding Pad Sandpaper 40-120Grit. 120mm 60-600 Grit Wire Drawing Wheel Brush Burnishing For Polishing ... moreBuffer Wheel. 81PCS 2" 50mm Type R Sanding Disc Roll Lock Surface Polishing Sandpaper Pads Kit.
Buy It Now
$3.50 Shipping Condition: New Location: China ERGONOMICS TOOL HANDLE - Hard and Solid beech wood ， Ergonomics design makes it more comfortable while doing turning job. Features a square shaft so the ... moreflat back can be kept flat on the tool rest and level with the floor.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$4.68 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. The mounting ... moreholes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: Plain Back, Recessed 3.740" × .184" Deep. Comes with a semi-finished back plate (2-1/4 × 8 Threaded) exactly as our picture show. ... moreThe mounting holes are already drilled and tapped. Customer just need to use their own lathe to lightly surface the front surface and turn very little on the registration boss according to the actual recess of the chuck, then bolt the two parts together with the included bolts. This work just like assembly a 3-jaw chuck with a new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: Bearing design, using high speed bearing for high accuracy. Dust proof seal preventing cutting dust enter into bearing thus prolong ... moreservice time. Designed for lathe in medium load environment. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much. If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible. Condition:100% Brand New & High Quality Material: carbon alloy steel Accuracy: 0.001 Diameter: 2-1/2"× 1-11/16".
Buy It Now
$3.50 Shipping Condition: New Location: China ERGONOMICS TOOL HANDLE - Hard and Solid beech wood ， Ergonomics design makes it more comfortable while doing turning job. Features a square shaft so the ... moreflat back can be kept flat on the tool rest and level with the floor.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States This Ultimate Assembly Pen Tool turns your lathe into a perfect pen press.
Buy It Now
Free Shipping Condition: New Location: China WOOD TURNING TOOLS - Set includes ：.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifics and features: Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle ... morewith CNC point to enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 degree Condition: New Fitments: High speed lathe and CNC lathe Package Includes: 1 × Live Center.
Buy It Now
Free Shipping Condition: New Location: China Grooving blade. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your ... moremonitor and light brightness. WOOD TURNING TOOLS - Set includes ：.
Buy It Now
Free Shipping Condition: New Location: China Can work with hand, convinient woodworking tool. Perfect Wood Turning Performance. 1 x Wood turning tool with wood handle. Hardness of Blade: 90HRC. Color ... moreof Blade: Gold. 1 x Wrench. 3# Square round 15mm.
Buy It Now
$93.00 Shipping Condition: New Location: China All of the machines are safe touch except milling machines. It requests to be used under parents or teachers instruction when the milling machine is being ... moreused by the kids. Switching power input:AC110V-240V.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Furnished with HSS cut off blade. Lathe Swing: 16". Blade Width: 3/16". Blade Height: 1". Holder Length: 8". Holder Height: 1-5/8". Holder Width: 3/4". ... moreYou may ask for freight cost before buying tools.
Buy It Now
Free Shipping Condition: New Location: China Can work with hand, convinient woodworking tool. Perfect Wood Turning Performance. 1 x Wood turning tool with wood handle. Hardness of Blade: 90HRC. Color ... moreof Blade: Gold. 1 x Wrench. 3# Square round 15mm.
Buy It Now
Free Shipping Condition: New Location: China Aluminum milling cutter CNC machine tool inserts. High precision wear resistant and not easy to break. High temperature resistance and oxidation resistance.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Snappy item no. 42016. This is the 1/4" Snappy Drill Adapter. This is a very unique drilling system. Each collet adapter will accommodat a range ... moreof 1/64", from. 002 larger to. 015 smaller than the size listed.
Buy It Now
Free Shipping Condition: New Location: China Made of Cast Iron, This lathe tool rest is compatible with most mini and midi lathes;. Material: Cast iron. Wear-Resistant, Anti-Rust, High Hardness, ... moreHas A Long Service Life;. 1 × Lathe Tool Rest. Color: As shown.
Buy It Now
$3.50 Shipping Condition: New Location: China Detailer tip – Diamond 10x 30x2.5mm, with Radius point ;. ERGONOMICS TOOL HANDLE - Hard and Solid beech wood ， Ergonomics design makes it more comfortable ... morewhile doing turning job. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
Buy It Now
$24.75 Shipping Condition: Used Location: Milroy, United States Approx 1.700 across the wide part of the vee x 8" tall x 14" OAL.
Buy It Now
$2.89 Shipping Condition: New Location: China 1/4" 1/8"Extended Pneumatic Engraving Grinding Machine Kit Air Angle Die Grinder. Pneumatic Ultrasonic Air Micro Grinder Recicating Oscillating File Polisher. ... moreAir Random Orbital Sander Kit Pneumatic Polisher Machine for Car Auto Body 48pcs.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Design-Constructed from high-grade heated alloy steel for long-term reliability. The 3.25" wide jaw opening makes gripping a variety of materials ... moreand shapes easy. Great for shop, home, automotive, and farm. Swivel Pads-Each unit comes with swivel pads that adjust to the clamping surface while avoiding damage. Clamps wood, metal, plastic, and more. Adjustable Pressure & Trigger-A easy turn-screw adjusts the size and pressure to give you a strong clamp while you work. The clamp stays securely locked with the classic guarded trigger release. Feature:.
Buy It Now
Free Shipping Condition: New Location: China 1" 2" 3" Roll Lock Sanding Disc Pad Holder 1/4”Shank Set For Die Grinder Drill. 1Pc Pneumatic Sanding Drum. The polishing air drum is used for polishing ... morethe air drum motor, and it is used for polishing wood with other processing materials.
Buy It Now
Free Shipping Condition: New Location: China WOOD TURNING TOOLS - Set includes ：. 2pcs rougher tip – detailer tip – Diamond 10x 30x2.5mm, with Radius poin t;.
Buy It Now
Free Shipping Condition: New Location: China Can work with hand, convinient woodworking tool. Perfect Wood Turning Performance. Hardness of Blade: 90HRC. Color of Blade: Gold. 1 x Wood turning tool ... morewith wood handle. 1 x Wrench. 3# Square round 15mm.
Buy It Now
Free Shipping Condition: New Location: China Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor. ERGONOMICS TOOL HANDLE - Hard and Solid beech wood ... more， Ergonomics design makes it more comfortable while doing turning job.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H5904 Clamp Type Cut Off Tool #2. These Clamp Type Cut-off Tools feature 3 clamp systems and are finished in black oxide coatings. Choose the size for ... moreyour lathe. Each includes a hex wrench. 1/2" x 1/2" tool holder size.
Buy It Now
$152.85 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature：.
Buy It Now
Free Shipping Condition: New Location: Miami, United States HSS wood lathe tenon tool. Get a clean, sharp and accurate 90 degree angle corner for delicate turnings. For cutting perfect tenons on pen center bands. ... moreA must tool for any pen maker.
Buy It Now
$13.16 Shipping Condition: New Location: Canada
Buy It Now
Free Shipping Condition: New Location: China 1Pc Pneumatic Sanding Drum. The polishing air drum is used for polishing the air drum motor, and it is used for polishing wood with other processing materials. ... more5Pcs 80# Sanding Drum. 5Pcs 120# Sanding Drum.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Made of Cast Iron, This lathe tool rest is compatible with most mini and midi lathes;. 1 × Lathe Tool Rest. Material: Cast iron. Wear-Resistant, Anti-Rust, ... moreHigh Hardness, Has A Long Service Life;. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
|
|
|
|
American broach arbor production bearing press cnc tool lath mill weld cutting
When listing ends it's gone this is the last listing for this machine it's has a buyer localy if it dosn't sell this time. I will load this machine for free if it sells for the asking price. This is for one of the two in the pictures both are for sale. They are used American 6 ton high speed hydraulic broach press or set press I don't know much about these so ask and I will do my best. I know the motor is 7.5 hp and 3ph the stroke I believe is 20" not sure. I can check if needed. These machines are located in Steuben. Maine. and I'm 84 miles for that so it might take a few days to answer a question that I have to go to the shop and get I will do my best to help with the questions. The building has sold these were in so they need to go sell or junk IF YOU DON'T INTEND ON PAYING DON'T BID IF NOT SERIOUS DON'T ... moreBID. I have over 31 pieces of welding. Fabrication, machining, polishing, plastic, and tooling to sell from a closed shop I'm selling one at a time. I'm only human so I make mistakes if some thing is wrong let me know or if you need more info let me know I will do my best to take care of what you need to the best of my ability. These machines are located in Steuben.Me and that is 84 miles from me and may take a couple of days to get the info to you. I'm sorry but I no longer accept Paypal for anything over $1.000.00 the fees have become to high and In order to keep your cost down This is what I have had to do If you are willing to pay an extra shipping fee I would be willing to take care of it all right down to getting it to you cost would be time and mat. You would have to only make arangements to get it off the truck at your place. I do own a goose neck trailer for delivery of some things I get $ 1.45 mile plus tolls one way. This is an absolute auction there will be no refunds and it's the buyers responsibility to make sure the item is what they want and to inspect the item before bidding anyone bidding will be held to the contract and if default happens
|
|
|
Vintage/Old Tool. - LATH HAMMER.
Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Vintage/Old Tool. LATH HAMMER. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Good Hammer. 6 ¾” long head. In FINE condition. Head/Handle length is around 13" The handle looks& feels firm to the head. Good harwood handle. Some storage marks. Head-Some light tarnish and little/no use marks. Rare item Total weight unpacked 622g. For shipping/ postage cost outside UK please ask- Thank you. I will accept U.K. Postal Order or U.K. Cheque. Subject to clearance. PayPal only outside U.K. Happy to combine items on multiple purchases. Check out my other items! Normal 0 false false false EN-GB ... moreX-NONE X-NONE
|
|
|
Vintage Lath Plaster Hammer Hatchet Multi tool
Vintage Lath Plasterers Hammer/Hatchet/Screwdriver Multi Tool Stamped on one side D.G.M. Nr.5664-87 on the other side Germany Overall length 9" Length of head 3.5" fully Depth of head at deepest 2 1/4" A tool in good condition with knocks and chips relevant to use and age I am not sure if my description of the use of this tool is spot on so please keep me right! Overseas bidders please ask postage costs prior to bidding! Thank you for viewing my listing and happy bidding!
|
|
|
LOT OF 4 CUTMORE T-1 89-025-2295-1 LATH TOOL BIT SQUARE BAR R18818
LOT OF 4 CUTMORE T-1 89-025-2295-1 LATH TOOL BIT SQUARE BAR R18818 ITEM: LOT OF 4 CUTMORE LATH TOOL BIT SQUARE BAR MODEL: T-1 89-025-2295-1 LISTER: AM WEIGHT: 4lb ITEM# R18818 We accept Paypal and Credit Cards. 1. We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. 2. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. 3. We ship our items within 1 to 2 business days of receiving payment. 4. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. 5. We only ship through UPS. Collect shipping must be through your UPS account. ... more6. If the item is to be shipped on a skid please contact us for a Competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your ebay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. 7. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1. Bid with confidence. We put customer satisfaction as our#1 priority. We are always willing to resolve issues and offer hassle-free refunds! 2. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. 3. If you receive an item that is dead on arrival. We will refund 100% of your purchase price including shipping co
|
|
|
LOT (45+) Lath Tool Parts Dead Center Taper Adapters Dog Wrench Spindle Adapter
LOT(45+) Lath Tool Parts Dead Center Taper Adapters Dog Wrench Spindle Adapter Cutting Tool Bits Huge lot with a great variety of parts pieces. Dog is No. 2 and stamped ½ One of the three dead centers is marked no. 2 morse One Taper adapter is marked 5/16 another is marked 3/8. Wrenches are south bend lathe company and Williams 19/32 Box of 6 Braeburn Alloy Steel BRAEMOW bits PLUS MUCH MORE! Please see photos and ask questions if needed before bidding. Combined shipping is available when possible/practical.
|
|
|
TA SHING 15 X 40 GAP BED TOOL ROOM LATHE ENGINE LATHE SOUTHBEND HARDINGE LATH
HERE IS A NICE HEAVY STEEL CAST TA SHING 15" X 40" GEARED HEAD METAL LATHE. THIS LATHE CAN BE INSPECTED UNDER POWER IN MPLS MN. THIS LATHE HAS BEEN CLEANED AND CYCLED. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-7974. THANK YOU. GENERAL SPECIFICATIONS: TASHING 15”x40” Heavy Duty Lathe Model W100SK Serial Number W10434 New in 1981 Bed Length: 70.875” Bed Width: 11” Swing Over Bed: 14.5” Swing Over Cross Slide: 8.25” Swing Over Gap: 24”x10” Cross Slide Travel: 8.625” Compound Rest Travel: 4.3125” Tailstock Spindle Travel: 5” Distance Between Centers: 39.375” Dia. Of Hole Through Spindle: 1.5625” Spindle Speeds: 8) 70-2000 Taper of Spindle Bore: 5 Morse Taper Taper of Center: 3 Morse Taper Taper of Tailstock: 4 Morse Taper Type of Spindle Nose: ASA-A-1-5 Number of Feed Changes: 40) Feed Rate Per Rev. 0.04-0.56mm Rate of Threads ... moreInch: 4-56 TPI Rate of Threads Metric: 0.4-7 mm Lead Screw Dia. X Acme Thread: 1.125” X 4 TPI Drive Motor: 3 HP Wired: 220 Volt 3 Phase Weight: 3528 Pounds Measures: 87”x39”x56”H Complete With: Heavy Duty Cast Chip Pan Coolant Pump and Reservoir Tool Post PRICE $4950.00 WE WILL LOAD ON YOUR TRUCK FOR FREE. SOLD AS IS- AS INSPECTED.
|
|
|
Vintage True Temper Genuine Underhill No 60 Lath Hatchet Head Tool
Here is a vintage True Temper hatchet. This is marked TRUE TEMPER GENUINE UNDERHILL on one side and NO. 60 on the other. The hatchet head measures about 6 1/2" long. The face is about 1 1/4" wide. The cutting edge is about 2 1/4" long. This head weighs about 1 lb 1 oz. This is used. This is for the head only; there is no handle. There is a hole under the marking; I do not know if it is original or not. The head has scratches. Dings, and wear. There is rust and pitting. The face has some small chips. There are some small chips around the top where the handle would go. The cutting edge will need reshaped and sharpened. Please view pictures to see condition. The shipping for this item will cost $5.40. I combine shipping when possible. I accept PayPal. Please ask any questions. Please view my other auctions!
|
|
|
Yuasa lath tool holder Quick change post.
Tool Post is in good condition. Made in Japan. Has very little use. It has bee checked over and works perfect. It comes with five tool holders. 1 Holder is a Phase II 250-201 in excellent condition. Made in China. 2 Holder is a Phase II 250-201 in excellent condition. Made in China. 3 Holder is a Phase II 250-201 in excellent condition. Also Made in China. 4 Holder is a Yuasa. It has some surface rust works fine. 5 Holder is a Yuasa boring bar holder.750 bore hole. In very good working order. very light surface rust.
|
|
|
Lath J H Williams Co 2020R Home Craft Cut Off - 2040 Knurling Tool +more
Wow these are very nice old tools- if you need ant info please just send a question- Posted with
|
|
|
VINTAGE PLUMB LATH WOOD SHINGLE HATCHET CARPENTERS ROOFERS HANDYMAN TOOL CAMPER
OLD PLUMB WOOD SHINGLERS HATCHET FOR YOUR CONSIDERATION OVERALL LENGTH 13 INCHES SHIPPING COST AUTOMATICALLY DETERMINED BY WEIGHT AND PACKAGE SIZE FROM ZIP CODE 02806 TO BUYERS LOCATION USING EBAY SHIPPING CALCULATOR
|
|
|
Vtg True Temper Genuine Underhill No. 60 Hatchet Waffle Face Lath Shingling Tool
This vintage True Temper Genuine Underhill No. 60 Lath Shingling Hatchet measures 13" long overall and the head measures 6 3/4" long. The waffle face measures 1 3/16" X 1 1/4" and the bit is 2 1/4" Total weight is 25 oz. The Original embossed"TRUE TEMPER" hickory handle is solid and the head is firmly attached! Nice patina on the head! Please see photos for further description. Have a Great Day! Same Business Day- FAST& FREE SHIPPING! I’ve taken the best photos that I can and tried to describe the item to the best of my ability. So. If you have any questions, please contact me BEFORE bidding/purchasing. I accept returns on items that have been misrepresented. The return request must be within 30 days of buyer receiving item. If you are not happy with your purchase. Please contact me for resolution PRIOR ... moreto leaving any feedback. Buyer pays for return shipping. Shipping charges are non-refundable. Payment is expected within 3 days of end of auction and I accept Paypal exclusively. I will ship within 1 business day of receiving payment and ONLY ship to the Continental United States. Thanks for looking and Happy Bidding!
|
|
|
lathe tool holder lath 1" shank brown and sharp machining adjustable chuck, tool
BROWN& SHARPE MODEL NO. 22 B MACHINING/ LATHE MACHINE TOOL HOLDER W/ 1" SHANK AND 1" HOLE COMES AS SHOWN IN IMAGES PLEASE KNOW WHAT YOU ARE BUYING. AS WE ARE NOT TOO FAMILIAR WITH THESE PRODUCTS. OUR SHIPPING& HANDLING RATES ARE NOT MEANT TO MISLEAD YOU. EVERYBODY KNOWS PRICES OF FLAT RATE SHIPPING- AND. THAT'S NOT OUR STYLE. SO PLEASE JUST CONSIDER IT AS PART OF THE PRICE OF THIS TOOL. IT HAS ACTUALLY BEEN DIFFICULT TO GET THESE TO MARKET AND MAKE THEM AVAILABLE AT $0.99, SO PLEASE BEAR WITH US. WE HAVE MANY MANY MORE- SO CHECK OUT OTHER ITEMS- THANK YOU
|
|
|
GTW GTW (Germantown Tool Works) Lath Or Cedar Shake Hatchet W/ 2 Nail Pullers
Antique GTW(Germantown Tool Works) Lath/ Cedar Shakes hatchet. Two nail pullers. Buyer pays $6.50 shipping USA International shipping $35.00
|
|
|
CARBOLOY LATH TOOL HOLDER TFL 20 5 1.25" X 7" OAL (LOC780)
I ship 6 days a week. I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING PRICE VARIES.
|
|
|
Complete American Tool Company Lath
This is an 8mm American Watch Tool Co. Jewelers/Watchmaker Bench Top Lathe. The motor is made by Hamilton Beach Mfg. Co. and it is marked 40KS546337A. 115 AC/DC. The base measures 11.5" x 9.25" and the lathe does work. Comes with varies speed foot pedal, a tail stock and a folding steady rest. Sold"as is" I got this from Chapter 1 Philadelphia Clock Show. Feel free to ask any questions. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14525934c4b-0x11c-
|
|
|
lot of used 1in. lath tool holders
this is a lot of 1.0 tool holders these are very used they show wear from years of use.there a no extra inserts with these.just what is shown.sandvic no#tgdr 25.4-4m.And two stgcr 16 3d eom and kennametal nsr-163d,nelr-164c ins np-13. these have been sitting around for a while and have surface rust on them.
|
|
|
Armstrong Lath Tool Holder No. 2-S
Used! Armstrong Lathe Tool Holder NO.2-S Please see photo's for details. Measurements are in inches. Please visit our store at midwaytools for more products!
|
|
|
Armstrong Lath Tool Holder No. T4-L, Tungsten Carbide
Used! Armstrong Lathe Tool Holder NO.T4-L Tungsten Carbide Please see photo's for details. Measurements are in inches. Please visit our store at midwaytools for more products!
|
|
|
Armstrong Lath Tool Holder No. 2L
Used! Armstrong Lathe Tool Holder NO. 2L Please see photo's for details. Measurements are in inches. Please visit our store at midwaytools for more products!
|
|
|
Good Used Vintage Estwing E3-CA Roofers Shingle Sheetrockers Lath Hammer Tool
Good Used Vintage Estwing E3-CA Roofers Shingle Sheetrockers Lath Hammer Tool Selling With No Reserve! Hi! I have for auction here a used Estwing E3-CA Shingle Hammer. It is definitely used and will need to be cleaned. But still has some life left in it. Great addition to your tool box. H elp yourself to a good deal! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. ... moreMI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship within 24 hours of payment. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demol
|
|
|
MACHINIST LATH TOOL HORIZONTAL LEVER ACTUATED INDEXER 5C COLLET INDEXER - JAPAN
PRECISION MACHINIST TOOLS& PARTS HORIZONTAL LEVER ACTUATED INDEXER 5C COLLET INDEXER MADE IN JAPAN USED WITH SIGNS OF WEAR ALL PARTS MOVABLE ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE& THICKNESS. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ... moreME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
MACHINIST TAPER REAMER BIT MILL MACHINE TOOL SHANK DRILL LATH 2- 9/16" 1- 3/8"
FOR AUCTION: 3 REAMER BITS. LEFT TO RIGHT IN 1st PHOTO. WTUSA 3/8" X 4 5/8" LONG. 2nd WTUSA 9/16" X 5 7/8" LONG. 3rd NITRO USA 9/16" X 6 1/16" ALL SEEM TO BE USED LITTLE IF USED AT ALL. IMPERFECTIONS IF ANY ARE DOCUMENTED IN THE PHOTOS AND DISCRIPTION. HAPPY TO COMBINE SO CHECK OUT MY CURRENT VINTAGE TOOL AUCTIONS AND FOR OTHER CLEAN COOL STUFF. YOU MIGHT FIND SOMETHING YOU DIDN'T KNOW YOU NEEDED. I HAVE TRIED TO DESCRIBE THE ITEMS TO THE BEST OF MY ABILITY THROUGH THE PHOTOS AND TH E ITEM DESCRIPTION. THE ITEM IS BEING SOLD"AS IS. I DO MY BEST TO POINT OUT OR PHOTOGRAPH RELEVANT FLAWS. WHEN DEALING WITH USED OR VINTAGE ITEMS. THERE MAY BE MARKS I DO NOT NOTICE OR MAY NOT BELIEVE ARE RELEVANT. BE SURE TO LOOK OVER THE PHOTOS CLOSELY. IF THE PHOTOS DO NOT SHOW EVERYTHING YOU NEED TO SEE, PLEASE EBAY MESSAGE ... moreME AND I WILL REPHOTOGRAPH AN ITEM AS REQUESTED. WE STRIVE TO SELL ONLY QUALITY PRODUCTS ON EBAY. IF YOU HAVE ANY QUESTIONS AT ALL. PLEASE CONTACT ME THROUGH EBAY MESSAGING PRIOR TO BIDDING AND I WILL ANSWER THEM THE BEST I CAN. WINNING BIDDERS IN THE LOWER 48 U.S. CAN PAY THE EBAY GENERATED INVOICE BECAUSE THE SHIPPING RATE QUOTED IN THIS AUCTION IS SET IN STONE. INSURANCE NOT INCLUDED. IF YOU PREFER A SPECIFIC TYPE OF SHIPPING. NOTIFY ME THRU EBAY MESSAGING AT THE END OF THE AUCTION AND I WILL COMPLY. I ACCEPT RETURNS ON USED OR VINTAGE ITEMS BUT I DO NOT ACCEPT RETURNS ON NIB ITEMS. BE SURE THAT WHAT IS UP FOR AUCTION WILL FIT YOUR NEEDS OR APPLICATION BEFORE YOU BID. INTERNATIONAL SHIPPING: I AM HAPPY TO SHIP ANYWHERE OUTSIDE THE LOWER 48 U.S.A. ATTN: IF YOUR ADDRESS IS NOT IN THE LOWER 48 U.S.A. PLEASE DO NOT PAY THE EBAY GENERATED INVOICE. YOU WILL GET A NEW INVOICE WITH THE ACTUAL SHIPPING COSTS TO YOUR ADDRESS/COUNTRY!
|
|
|
Old Underhill Edge Tool Co Hatchet head, vintage lath or carpenter hammer tool
A nice old Underhill Edge Tool Co hatchet head. No handle. Used condition with patina and some use marks but nice shape. Please see pictures to determine condition. Check out my! Thanks for looking!
|
|
|
Vintage Brades No 2 Roofers lath hammer-Axe old tool
Vintage Brades No 2 Roofers lath hammer-axe by Brades. Marked also 170 No 2. Ash handle, Overall length 12 3/4" 324mm) overall width of head, 6" 152mm) Please see photo's. PLEASE SEE MY OTHER LISTINGS. Thank you for your interest. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1478da504fe-0x110-
|
|
|
Sears Craftsman wood lath shaping tool # U4 817625D
up for auction is a good used wood lath shaping tool from a vintage 12" craftsman wood lath. casting# is U4 817625D some minor rust but in good working condition
|
|
|
Record Power Tools HSS Skew Parting & Beading Tool Wood Turning Lath Tools
Record Power Tools HSS Skew Parting& Beading Tool Wood Turning Lath. Normal 0 false false false EN-GB X-NONE X-NONE Because of the current world financial situation I am willing to wait 20 Days for PAYMENT FROM END OF AUCTION Please contact me through EBay ONLY asking a question against item if you wish me to hold FOR THIS TIME. This will not be reflected in the feedback I leave as this will be prior arrangement. Parting& Beading Tool measures 411 mm long. Blade is stamped Record Power HSS Sheffield England, handle has gold lettering Record Power Ltd, slight marks and one minor hole in the handle, I don’t think this is a woodworm hole, the V point is very sharp. Skew item measures 403 mm long cutting edge which is very sharp measures 12.33 mm, stamped on the blade Record Power HSS Sheffield England, gold lettering slightly faded Record ... morePower Tools, items as shown in the photos that form part of the description, other similar items listed please take a look I give very good combined postage rates and very happy to wait payment for items finishing on different dates. Normal 0 false false false EN-GB X-NONE X-NONE Add me to your favourite sellers list View other items listed Postal Rate UK 1st Class Recorded Delivery UK Pounds Postal Rate Airmail Rest of World Including USA Australia. Japan,Canada, Asia, Africa. UK Pounds Postal Rate Airmail E/U European Union. UK Pounds Will quote for surface mail. This can take 2-12 weeks to reach you? 4.60 9-00 7-00 My Selling Policy I DO NOT accept buy it now offers. Or offers to end items early, so please do not ask me you will not get a reply. I try to answer any questions fully, please do not leave questions to the last 36 hours of auction ending, you may not get an answer as my auctions nearly always finish on the weekends and I do have a life other than Ebay. Items not selling will be re-listed at a later date normally 6-8 weeks later. So if you miss it you may have to wait a while until you see it again. I do not accept offers after the items listing has c
|
|
|
MACHINIST LATH TOOL LOT- ARMSTRONG No.0-R - L.S.STARRETT DRILL & WIRE CHART 19PC
HELLO. MACHINIST TOOL BOX FIND- 19 PCS LOT OF DIFFERENT CUTTERS AND TOOL HOLDERS DRILL& WIRE GAUGES PLEASE VIEW PHOTOS PART OF DESCRIPTION- ASK ANY QUESTIONS- YOU DECIDE This picture item is the exact item you will receive I try to take the most accurate Photos of my items and leave the final determination of the condition and grade to you based on pictures and description provided. Items are sold( AS IS) and are often of considerable age and will exhibit wear that may not be listed in description the absence of condition remarks does not mean it is in perfect condition PLEASE ANY QUESTIONS AT ALL E-MAIL ME
|
|
|
Lath Cutting Tool Holder
Selling a tool holder made by Armstrong. Size No.1. Cutting bit included.
|
|
|
Monarch Model 10EE Precision Tool Room Lath
Swing Over Bed Ways: 12 1/2" Swing Over Cross Slide: 7 1/4" Distance Between Centers: 20" Spindle Speed: Variable 5-4000RPM. Spindle Nose: D1-3 Camlock. Spindle Hole: 1 13/32" Threading: Built for Metric Only. Electrics: 3HP. 220 volts, 3 phase. Approximate Weight: 3450 lbs. Year of Manufacture: November 1976. Serial Number: 45906. Machine is equipped with the following: 8" 3 Jaw Chuck. 8" 4 Jaw Chuck. 5-C Collet Closer. Tool Post Aloris Model BXA. 4 5/8" Tool Holders. 1- 1 1/4 Boring Ba-holder. 1 Cut off Tool Holder. Steady Rest. Tail stock. PLEASE Contact Seller for shipping instructions. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1492db06d1a-0x10d-
|
|
|
Lath attachment tool/ bits
Lath tools/ bits in good condition
|
|
|
ALORIS QUICK CHANGE BXA-7 UNIVERSAL PARTING BLADE TOOL HOLDER for 10"-15" LATH
MODEL: BXA-7 DESCRIPTION: FITS LATHES WITH 10" 15" SWING SPECIFICATIONS: HOLDER TYPE: UNIVERSAL PARTING BLADE HOLDER CENTERLINE HEIGHT: 1" OVERALL HEIGHT: 1-3/4" CUTTING TOOL SIZE: 11/16" MAXIMUM HOLDER DEPTH: 3/16" BLADE SIZE: 11/16" H
|
|
|
Criterion TBG-1000 lath turning tool holder
Internal boring/threading new condition
|
|
|
shop smith mark V lath tool rest
I am selling a Shop Smith Mark V lath tool rest in good working condition
|
|
|
Vintage Amish Tobacco Lath - Primative Wood Tool - New
This is a Vintage Amish Tobacco Lath. Made from solid pine wood. Measures 22 x 5 1/4. 5 rungs On Nov-07-14 at 19:14:32 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Watchmaker Tool G Boley WW lath split wire chuck 4 collet
Stamped 4 on top. Marked G Boley Germany2. Very good condition.
|
|
|
MIX LOT VINTAGE LATH & DRILL PRESS TOOLS & TOOL PARTS 6 PIECES
MIX LOT VINTAGE LATH& DRILL PRESS TOOLS& TOOL PARTS 6 PIECES 2 EACH DRILL HOLDE CUTTER BY BRUNO# 101& 100 OTHER PIECES UNBRANDED. ITEM# 11-25-14-028-32 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
vintage antique lath hammer-Gold B Lath tool--Kansas City,Mo
vintage lath hammer head is 5" long buyer pays $5.00 shipping USA
|
|
 |